Ignis AWV 403/2 Washing machine Program Chart
Ignis AWV 403/2
Below you will find brief product information for Ignis AWV 403/2.
Ignis AWV 403/2 is a washing machine with a sleek design and user-friendly interface. It features various wash cycles tailored to different fabric types and levels of soiling, including options for cotton, synthetics, and delicate items. The machine also includes a half-load option, allowing for efficient washing of smaller loads. Additionally, it has special functions such as pre-wash, fabric softener dispenser, and adjustable water temperature settings.
Reklama
Reklama
GB AWV 403/2
Cotton
Synthetic
Delicate/Wool
On/Off
“Half load” option
5
6
7
1
2
3
4
+
+
Programme Type of textiles/Degree of soiling
Cotton with pre-wash
Cotton
Cotton
Synthetic
Cotton short
Synthetic short
Delicate
Wool
Rinse and long spin
Long spin
Rinse and short Spin
Short Spin
Heavily soiled, long wearing and temperature stable textiles in cotton and linen (bed linen, table linen, underwear, shirts etc).
The max load for heavily soiled laundry is 3.5 kg.
Averagely soiled, long wearing and temperature stable textiles in cotton and linen
(bed linen, table linen, underwear, shirts etc).
The max load for heavily soiled laundry is 3.5 kg.
Averagely soiled, textiles in cotton and linen (shirts, towels,etc).
The max load for heavily soiled laundry is 3.5 kg
Averagely soiled textils in cotton, linen, polyester (Diolen, Trevira); polyamide (Perlon, Nylon), other synthetics or similar blends.
Lightly soiled textils in cotton, linen, polyester (Diolen, Trevira); polyamide
(Perlon, Nylon), other synthetics or similar blends.
Curtains and delicate synthetic textiles (dresses, skirts and blouses etc).
Only machine washable woollens with pure new wool label.
With this programme you can add fabric softner or starch.
The programme ends with a long spin cycle.
This programme provides a long spin cycle, the same as the spin cycle in the Cotton programme.
With this programme you can add fabric softner or starch.
The programme ends with a short spin cycle.
This programme provides a short spin cycle, the same as the spin cycle in the Wool programme.
Draining Drain only, without spin, e.g to unload the laundry earlier.
2.0
2.5
2.0
1.5
1.0
5.0
Max
Load kg
Detergent and Additives
Prewash Wash Fabric
Softener
Special functions that can be selected
Half Load
Temperature Programme selector knob
°C
5.0
❉
Yes
❉ ❉
95 1
5.0
5.0
5.0
1.5
1.5
—
—
—
—
—
—
—
—
—
—
—
—
Yes
Yes
Yes
Yes
Yes
Yes
—
—
—
—
—
❉
❉
❉
❉
❉
❉
❉
—
❉
—
—
❉
❉
❉
❉
—
—
❉
—
—
—
—
95
60
60
40
40
40
Cold
—
Cold
—
—
2
3
4
5
6
7
+
+
5019 501 10023
CONSUMPTION DATA
Programme Water
Cotton 95 °C with pre-wash
Cotton 95 °C
Cotton 60 °C
Synthetic 60 °C
Cotton short 40°C
Synthetic 40 °C
Delicate 40 °C
Wool 40°C
1
2
3
4
5
6
7
(l)
80
65
60
80
80
70
70
60
Energy
(kWh)
2.00
1.80
1.20
0.90
0.70
0.60
0.60
0.60
Programme duration
(min.)
120
75
75
70
65
110
110
85
SELECTING THE PROGRAMME
1. Turn the programme selector knob clockwise to the desired programme.
PRESS THE DESIRED SPECIAL OPTION BUTTON
Lightly soiled / Half load button
• Reduces water consumption, above all during the rinse.
• Especially suitable for lightly soiled or small loads (reduce the detergent quantity).
PROGRAMME START
1. Plug in the appliance.
2. Turn on the water supply tap.
3. Press the “ON/OFF” button.
DOOR LOCK
The door locks automatically after the programme start until the end of the programme.
PROGRAMME END
• The programme sequence indicator is at “Stop”.
1. Press the “ON/OFF” button.
2. Cancel the special options by pressing the appropriate buttons.
3. Turn the water supply tap(s) off.
4. Wait for the door to unlock (about 2 minutes).
5. Open the door and unload the machine.
Note: Do not fully close the door but leave it ajar to allow the drum to dry out.
PROGRAMME RESELECTION
1. Press the “ON/OFF” button.
2. Select the new programme and relative options.
3. Press the “ON/OFF” button.
NOTES AND INDICATIONS FOR USE
Water level
It may not be visible as the cycle is optimised for a minimum water consumption without compromising washing results.
Cleaning the pump filter
To ensure an impeccable function of the pump, check the filter regular and clean it if necessary.
Close the filter properly to avoid leakage.
Motor smell
Washing machine motor creates a typical electrical smell during first cycles, this is normal and disappears after a few cycles.
5019 501 10023
Stiahnuť
Reklama