GB
A. “Door open” indication
This washing machine is equipped with automatic safety functions which detect and diagnose faults at an early stage and react appropriately, e.g.:
B. “Service” indication
C. “Water tap closed” indication
D. “Clean pump” indication
K
PROGRAMME CHART
C
D
H
A
B
I
E. Programme selector
F. “Start/Pause” button
G. Spin speed selector
H. Programme sequence indicator
I. “Reset” button
J. “Start delay” button
K. Time display
J G
E
F
Programme
Care
Labels
Max.
Load kg
Type of wash / Notes
- Respect the manufacturer's recommendations on the care label
Cotton
40 - 60 - 95 °C
Super Eco
60 °C
Coton
40 - 60 - 95 °C
60 °C
Synthétiques
30 - 40 - 60 °C
Délicat
30 - 40 °C
7.0
7.0
Normally to heavily soiled bed linen, table linen and underwear, towels, shirts etc. made of cotton and linen.
With heavily soiled laundry the additional “Prewash” option can be selected as well.
Slightly to normally soiled bed linen, table linen and underwear, towels, shirts etc. made of cotton and linen.
Offers highest economy in energy consumption by prolonged washing duration. Ideal to be run overnight to additionally profit from the more favourable energy rates. To avoid noise of spinning at night, set spin speed to “0” and start spin programme in the morning, or define programme start with “Start delay” accordingly.
Normally soiled blouses, shirts, overalls etc. made of polyester (Diolen,
Trevira), polyamide (Perlon, Nylon) or blends with cotton.
Synthetics
30 - 40 - 60 °C
Delicates
30 - 40 °C
3.0
1.5
Curtains and delicate clothing, dresses, skirts, shirts and blouses.
Daily load
40 °C
Quick wash
30min
30 °C
Wool
Cold - 40 °C
Handwash
30 - 40 °C
Rinse & Spin
Spin
Drain
40 °C
Rapide 30min.
30 °C
Wool
Froid - 40 °C
Lavage main
30 - 40 °C
Rinçage &
Essorage
Essorage
Vidange
–
–
–
4.0
4.0
1.0
1.0
Slightly to normally soiled textiles made of cotton and/or synthetics.
Shortly worn outer clothing made of cotton, polyester, polyamide and blends with cotton.
Only woollens with a felt-free finish, labelled with the woolmark and identified as machine washable.
Textiles made of linen, silk, wool and viscose marked as “handwashable”.
7.0
Same as the last rinse and the final spin in the “Cotton” programme.
7.0
–
In this programme spinning is intensive. Same as the spin cycle in the “Cotton” programme.
Water is drained only without any spinning. Alternative method of terminating programme after “Rinse hold”.
1)
: option / Yes : dosing required
For improved garment care spin speed is restricted in these programmes.
Detergents and Additives
Prewash
Main
Wash
Softener Start delay
Départ diffféré
Eco
Eco
Prewash
Prélavage
Special options
Easy ironing
Intensive rinse
Anti froissage
Rinçage intensif
Rinse hold
Variable spin
Arrêt cuve pleine
Essorage variable
Max.
Spin
Speed rpm
–
–
–
–
–
–
–
–
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
Max.
Max
1000
1000
Max.
Max.
1000
400
Max.
Max.
–
1)
1)
1)
1)
Laden is a registered trademark of Whirlpool USA.
5019 601 01009
CONSUMPTION DATA
Programme
Cotton
Cotton + Eco **
Cotton
Cotton
Super Eco
Synthetics
Synthetics
Delicates
Daily load
Quick wash
Wool
Handwash
Handwash
Temperature
30
40
30
40
60
60
40
40
40
30
(°C)
95
60
60
Load
7.0
7.0
3.0
3.0
1.5
4.0
4.0
1.0
1.0
1.0
(kg)
7.0
7.0
7.0
Water
69
69
50*
46
60
45
45
60
45
45
(l)
74*
54
69
Energy
(kWh)
2.10
1.19
1.33
0.75
0.84
0.80
0.50
0.50
0.50
0.40
0.50
0.50
0.40
Approx. Programme
Duration
(hours : minutes)
2:10
2:20
2:10
2:15
4:00
1:35
1:20
0:45
1:00
0:30
0:45
0:40
0:36
* The remaining time indicator can deviate from the values in the table, because it takes into account the household conditions
** To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water out.
ADD DETERGENTS, CLOSE THE DOOR AND
SELECT THE PROGRAMME
Add detergents as indicated on the front page and as described in the chapter “Detergent and Additives” in your Instructions for Use.
1. Turn the programme selector to the desired
programme and temperature.
2. The time display shows the duration of the
chosen programme (in hours and minutes), and
the “Start/Pause” indication lamp blinks.
3. The indication lamp of the predefined spin
speed lights up.
SELECT ANY DESIRED OPTION
Push the button(s) of any option(s) desired - the respective indication lamp lights up.
When the combination of programme and additional option(s) is not possible, the indication lights switch off automatically. Unsuitable combinations of options are deselected automatically.
“Eco” button
• With a modified temperature profile and a slightly
prologned washing duration, the optimum
combination of excellent washing result and even
lower energy consumption is achieved.
“Prewash” button
• Only for heavily soiled loads (for example sand,
granular dirt) sensible. Increases the cycle time by
approximately 15 min.
• Do not use liquid detergent for the main wash
when activating the Prewash option.
“Easy ironing” button
• Can be used together with “Cotton”, “Synthetics”
and “Daily load” programmes to make ironing
easier.
• Increases the water quantity and the clothes are
spun very gently.
“Intensive rinse” button
• More water is added and rinse cycle is prologned.
• This option is particularly suitable for areas with
very soft water, washing baby linen and helps
people with allergies.
“Rinse hold” button
• The laundry remains in the last rinse water
without progressing to the final spin cycle to avoid
creasing and prevent colours from changing.
• This option is particularly recommended for the
programmes “Synthetics”, “Daily load” and
“Delicates”.
• This function is particularly useful if you want to
postpone spinning to a later time, or if you want
to drain only.
Note: The programme stops to “Rinse hold” at
the time the “Rinse hold” light in the programme
sequence indicator is on. The indication lamp next
to the “Start/Pause” button bllinks.
• If you select “Rinse Hold” do not leave items to
soak for too long.
Terminate the “Rinse hold” option:
• Press the “Start/Pause” button; the programme
will terminate automatically with the final spin
cycle for the present wash programme.
• If you do not wish to spin the clothes, turn the
programme selector knob to the “Drain”
programme and press the “Start/Pause” button.
“Variable spin” button
• Every programme has a predefined spin speed.
• Press the button to set another spin speed.
• If spin speed “0” is selected, the final spinning is
cancelled but intermediate spin peaks remain
during the rinse. The water is drained out only.
START DELAY
The “Start delay” allows to run the machine at the consumer's convenience, for example at night when electricity is cheaper. Do not use liquid detergent when activating the Start delay.
• Select programme, temperature and options.
• Press the “Start delay” button to select the delay
time by 1 to 23 hours.
• Press the “Start/Pause” button. The countdown
of the delay time begins; the “Start delay”
indication lamp and the dot on the display will
keep blinking until the programme starts
• The time delay indication disappears when the
programme starts and it is replaced by the
remaining programme time.
• Once having pressed the “Start/Pause” button,
the number of hours preselected can be reduced
by pressing again the “Start delay” button.
• Do not use liquid detergent when activating the
Start delay.
To cancel the “Start delay”
..before you press the “Start/Pause” button:
• Turn the programme selector to another position
or press the “Reset” button.
..after having pressed the “Start/Pause” button:
• Press the “Reset” button for at least 3 second
- the start delay time disappears from the time
display.
PROGRAMME START
Open the tap and press the “Start/Pause” button.
The indication lamp next to the “Start/Pause” button lights up. The programme sequence indicator shows the current programme phase, running from left to right through Wash, Rinse, Spin/Drain.
The time display shows the remaining time programme time. Due to variations in load and temperature of inlet water, the remaining time is newly calculated in certain programme phases. If this is the case, an animation appears on the time display.
“DOOR OPEN” INDICATION
Before starting and after end of a programme, the lamp lights to show the the door can be opened.
As long as a wash programme is running, the door remains locked and must on no account be forced open.
In case you have an urgent need to open it during a running programme, refer to “Cancel (Reset) a running programme before the end”.
RED INDICATIONS
“Service”
Lighting up of the “Service” indication can be caused by a fault in an electrical component. Refer to the
“Troubleshooting Guide” in your “Instructions for
Use”; if the fault persists, contact our After Sales
Service.
“Water tap closed”
The appliance has no or insufficient water supply.
Open the water tap: if the indications still lights up, refer to the “Troubleshooting Guide” in the
Instructions for Use.
“Clean pump”
Waste water is not pumped out. Check whether the drain hose is kinked or the filter must be cleaned: in the latter case refer to the Instructions for Use
(“Removing the Filter”).
PROGRAMME END
• All the lights of the programme sequence
indicator are off, and the “Door open” indication
lights up.
1. Turn the programme selector to the “Off/O”
position.
2. Close the water tap.
3. Open the door and unload the machine.
4. Leave the door ajar to allow the drum to dry.
CHANGE PROGRAMME AND/OR OPTIONS
AFTER PROGRAMME START
1. Press the “Start/Pause” button to pause the
programme. The light flashes.
2. Select the new programme (with temperature),
any options and another spin speed if you want.
3. Press the “Start/Pause” button again. The new
programme continues at the same position where
the previous programme was interrupted. Do not
add detergent for this programme.
CANCEL (RESET) A RUNNING PROGRAMME
BEFORE THE END
The “Reset” button cancels a programme before the end.
• Press the “Reset” button for at least 3 seconds.
Any existing water is drained out before the door
can be opened.
Laden is a registered trademark of Whirlpool USA.
5019 601 01009
