GB LOE 60
This washing machine is equipped with
automatic safety functions which detect faults at an early stage and react appropriately, e.g.:
A. “Pump” indicator
B. “Water tap” indicator
Check your washing machine’s water supply.
B
C
PROGRAMME CHART
A
F
{
I
C. “Door Locked” indicator
As long as a washing programme is running, the lamp lights up to show that the door cannot be opened.
D. “Start” button
E. “Start Delay” button
F. Programme sequence indicator
Programme
Cotton
Cotone
Synthetic
Sintetici
Daily Mixed
5-7
Rapid wash
Rapido 30min.
8
Delicate
Delicati
Wool
Lana
Silk
Seta
Rinse & Spin
Risciacquo &
Centrifuga
Intensive Spin
Centrifuga
Gentle spin
Centrifuga breve
9-10
11-13
14
A
B
C
Drain
Scarico acqua
1-4
D
Care
Labels
Type of wash/
Degree of soiling
Normally to heavily soiled bed linen, table linen and underwear, towels, shirts etc. made of cotton and linen.
Normally soiled blouses, shirts and other outer clothing made of polyester (Diolen,
Trevira), polyamide (Perlon, Nylon) or mixtures of these fibres with cotton.
Slightly to normally soiled textiles made of cotton and/or synthetic fibres.
D E
Max.
load
Detergent and Additives
Softener
Main wash
Prewash
Start
Delay
Kg
G H
G. “Spin Speed Reduction” button
H. “Reset” button
I. Selectable programmes
Selectable special options =
❉
Easy
ironing
Prewash
Intensive
Rinse
Rinse hold
Speed reduction
Max.
spin speed rpm
Notes
5.0
2.5
3.0
❉
❉
❉
Yes
Yes
Yes
❉
❉
❉
❉
❉
❉
❉
❉
❉
❉
❉
❉
❉
❉
❉
❉
❉
❉
❉
600
600
600
“Prewash” can be additionally selected for heavily soiled laundry at any temperature.
“Prewash” can be additionally selected for heavily soiled laundry.
In this programme the spin speed should be adapted to the fabrics.
Hardly worn outer and sport clothing made of cotton, polyester, polyamid and mixed cotton fabrics.
Curtains and delicate dresses, skirts, shirts and blouses.
Only woollens with a felt-free finish, labelled with the woolmark and identified as machine washable.
Textiles made of linen, silk, wool or viscose marked as “handwashable”.
3.0
1.5
1.0
1.0
5.0
5.0
1.5
5.0
❉
❉
❉
❉
❉
Yes
Yes
Yes
Yes
❉
❉
❉
❉
❉
❉
❉
❉
❉
❉
❉
❉
❉
❉
❉
❉
❉
❉
❉
❉
❉
❉
1)
600
600
600
0
1)
600
600
600
If you select “Rinse Hold” do not leave items to soak for too long.
If you select “Rinse Hold” do not leave items to soak for too long. A very gentle spin is used in this programme.
Same as the spin cycle in the “Cotton” programme.
In this programme spinning is intensive. Same as the spin cycle in the “Cotton” programme.
A very gentle spin is used in this programme. Same as the spin cycle in the
“Wool” programme.
This programme only drains (alternative method of terminating the programme after
“Rinse Hold” without spinning). In addition all running programmes can be cancelled with this programme.
1)
For improved garment care spin speed is null in this programme.
5019 501 10077
CONSUMPTION DATA
Programme
Temperature
(°C)
Wash
(kg)
Water
(l)
Energy
(kWh)
Programme duration ** approx.
(hours : minutes)
Cotton
Cotton
Cotton
Synthetic
Synthetic
Daily Mixed
Rapid wash
Delicate
95
60
40
60
40
40
30
40
5.0
5.0
5.0
2.5
2.5
3.0
3.0
1.5
53***
48
48
55***
50
44
35
55
1.90
0.95
0.60
0.80
0.50
0.45
0.30
0.60
2:00
2:10
2:10
1:35
1:20
1:00
0:30
0:45
Wool
Silk
40
30
1.0
1.0
55
45
0.60
0.30
0:40
0:35
* The consumption values were measured in normalized conditions in compliance with Standard IEC/EN 60456.
** The programme duration may also vary from the chart values. The washing machine is able to allow for particular household conditions and to adapt the programme run time accordingly.
*** To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water out.
POUR IN DETERGENT, CLOSE THE
DOOR AND SELECT A PROGRAMME
Add the detergent as described in the chapter
“Detergent and Additives” in the instructions for use.
1.
Turn the programme selector knob in any
2.
direction to the desired programme.
The light above the “Start” button flashes.
The programme sequence indicator and the indicator with the maximum possible spin speed light up.
SELECT SPECIAL OPTIONS -
The corresponding lights go on (if not selectable: rapid flashing for 3 seconds)
“Easy Ironing” button
• To lessen creasing, the water quantity is increased and the clothes are spun very gently at reduced power. This makes your laundry significantly damper at the end of the programme.
“Prewash” button
• Only for heavily soiled laundry (for example sand or granular dirt). Programme duration is increased by some 15 min.
“Intensive Rinse” button
• An additional rinse cycle is carried out.
• This option is particularly suitable for areas with very soft water, washing baby linen and helps people with detergent allergies.
“Rinse Hold” button
• The laundry remains in the last rinse water without being spun: discoloration of the laundry and additional creasing are prevented.
• This option is particularly recommended for the programme “Synthetics” or “Delicates”.
• This function is particularly useful if you want to postpone spinning to a later time.
Note: The programme has reached the “Rinse
Hold” when the corresponding light flashes.
Terminate the “Rinse Hold” option:
• Press the “Rinse Hold” button again; the programme will terminate automatically with the appropriate spin cycle for the current programme.
• If you do not wish to spin the clothes, turn the programme selector knob to “Drain” and press the “Start” button again.
“Spin Speed Reduction” button
• A maximum spin speed is assigned to each programme.
• Press the button to set another speed for the spin cycle.
• If no light goes on, the final spin is cancelled.
The water is only drained out.
START DELAY
With the “Start Delay” function the appliance can be run cheaply e.g. at night, when the electricity is cheaper.
• Press the “Start Delay” button. Select the programme start from 3 to 12 hours ahead by pressing the button again.
• Press the “Start” button.
The Start Delay indicator light flashes until the programme starts.
“Start Delay” correction.
• Before the “Start Delay” has been started:
The preset number of hours can be altered by continuously pressing the “Start Delay” button.
By pressing the Start Delay button again after the
“12” setting, the time delay can be deleted again or set again.
• After the “Start Delay” has been started:
The preset number of hours can be reduced by pressing the “Start Delay” button again; please note, however, that the washing programme starts IMMEDIATELY, as soon as you activate it again with the Start Delay switch 3 setting. To increase the number of hours preselected, first turn the programme selector switch to the “Off” position. Then set the programme and the additional options again and select the desired number of hours.
PROGRAMME START
After you have selected the programme and the additional option, the indicator light over the
“Start” button flashes. Turn on the tap and start the programme by pressing the “Start” button.
Now the indicator light above the button goes on.
In addition, all programme phases are indicated by the associated lights. After the end of a programme phase the associated indicator light goes out. Thus the programme sequence indicator moves from left to right across the wash, rinse and spin phases. At the end of the programme only the “End” indicator is still on.
DOOR LOCKED INDICATOR
As long as a washing programme is running, the lamp lights up to show that the door cannot be opened.
When the lamp goes off, the door can be opened again.
If “Start” has been pressed, but the door is not latched, the “Door locked” indicator flashes for 10 seconds. The door must be pushed shut within this time.
After the 10 seconds, the “Door locked” indicator goes out and the “Start” button flashes. The door must then be opened and closed again and the “Start” button must be pressed.
“TROUBLE” INDICATORS
“Pump”
Waste water is not pumped out. Check wether the drain hose is kinked or the filter must be cleaned; in the latter case refer to the Instructions for Use
(“Removing the Filter”).
“Water Tap”
The appliance has no or insufficient water supply.
Open the water tap; if the indication still lights up, refer to the “Troubleshooting Guide” in the
Instructions for Use.
PROGRAMME END
• The “End” indicator goes on.
1. Set the programme selector knob to the “Off” position .
2. Turn off the tap.
3. Open the door and unload the machine.
RESELECT AFTER PROGRAMME START
A newly-selected programme will continue in the same programme section during which the current programme was interrupted. Therefore do not add any more detergent.
1. Press the “Start” button to interrupt the programme. The light flashes.
2. Select the new programme (with temperature), any additional options and - if you wish - another spin speed.
3. Press the “Start” button again to restart the programme.
• If you are in the “Prewash” programme step this additional option can not be deselected as described (to do this see “Cancel (reset) a running programme before the end”).
CANCEL (RESET) A RUNNING
PROGRAMME BEFORE THE END
Press the “Reset” button for at least 2 seconds. Any existing water is drained out before the door can be opened.
5019 501 10077
