OWNER’S MANUAL

AIR CONDITIONER

Read this owner’s manual thoroughly before operating the appliance and keep it handy for reference at all times.

TYPE: PORTABLE AIR CONDITIONER (INVERTER)

EN ENGLISH FR FRANÇAIS

LP1419IVSM

MFL70521432

Rev.00_020421

www.lg.com

Copyright © 2018 - 2021 LG Electronics Inc. All Rights Reserved.

2 TABLE OF CONTENTS

TABLE OF CONTENTS

3 SAFETY INSTRUCTIONS

3 IMPORTANT SAFETY INSTRUCTIONS

8 PRODUCT OVERVIEW

8 Key Parts and Components

9 INSTALLATION

9 Electrical Data

10 Before Installation the Air Conditioner

10 Wireless Remote Control

11 Preparing for Installation

11 Selection of Installation Location

12 Window Vent Panel and Extensions

13 Installation (Vertical)

15 Installation (Horizontal)

17 OPERATION

17 Control Panel and Remote Control

18 Removing Condensation Buildup

19 SMART FUNCTIONS

19 LG ThinQ Application

21 Smart Diagnosis TM

22 MAINTENANCE

22 Emptying the Water Collection Tank

22 Cleaning the Case

22 Cleaning the Air Filter

23 TROUBLESHOOTING

23 Before Calling for Service

23 Normal Sounds You May Hear

27 WARRANTY

SAFETY INSTRUCTIONS 3 EN

SAFETY INSTRUCTIONS

READ ALL INSTRUCTIONS BEFORE USE

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always read and follow all safety messages.

This is the safety alert symbol.

This symbol alerts you to potential hazards that can kill or injure you and others.

All safety messages will follow the safety alert symbol and either the word WARNING or

CAUTION.

These words mean:

WARNING

You may be killed or seriously injured if you do not follow instructions.

CAUTION

You may be injured or cause damage to the product if you do not follow instructions.

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what may happen if the instructions are not followed.

The following symbols are displayed on units.

This symbol indicates that this appliance uses a flammable refrigerant. If the refrigerant is is leaked and exposure to an external ignition source, there is a risk of fire.

This symbol indicates that the Operation Manual should be read carefully.

This symbol indicates that a service personnel should be handling this equipment with reference to the Installation Manual.

This symbol indicates that information is available such as the Operating Manual or

Installation Manual.

IMPORTANT SAFETY INSTRUCTIONS

WARNING

injury to persons when using this product, follow basic precautions, including the following:

INSTALLATION

Before use, the appliance must be properly installed as described in this manual.

Contact the authorized service technician for repair or maintenance of this unit.

Contact the installer for installation of this unit.

4 SAFETY INSTRUCTIONS

When the power cord is to be replaced, replacement work shall be performed by authorized personnel only using only genuine replacement parts.

and authorized personnel only.

Connect to a properly rated, protected, and sized power circuit to avoid electrical overload.

Always plug into a grounded outlet.

Do not under any circumstances, cut or remove the third (ground) prong from the power cord.

When installing or moving the appliance, be careful not to pinch, crush, or damage the power cord.

Plug in the power plug properly.

Do not modify or extend the power cord.

Do not start/stop operation by plugging/unplugging the power cord.

If the cord/plug is damaged, have it replaced by an authorized service person using authorized replacement parts.

Use a dedicated circuit.

Do not disassemble or modify the product.

Adhere to all industry recommended safety procedures including the use of long-sleeved gloves and safety glasses.

Use care when unpacking and installing. The edges of the product may be sharp.

Disconnect the power cord or circuit breaker before installing or servicing the appliance.

Keep packaging materials out of the reach of children. These materials can pose a suffocation risk to children.

Store and install the product where it will not be exposed to temperatures below freezing or exposed to outdoor weather conditions.

other appliance.

Do not install the unit in potentially explosive atmospheres.

OPERATION

Use this appliance only for its intended purpose.

Never attempt to operate this appliance if it is damaged, malfunctioning, partially disassembled, or has missing or broken parts, including a damaged cord or plug.

Repair or immediately replace all power cords that have become frayed or otherwise damaged.

Do not use a cord that shows cracks or abrasion damage along its length or at either end.

Do not run cord under carpets or mats where it could be stepped on and damaged.

Keep the cord out from under heavy objects like tables or chairs.

Do not place the power cord near a heat source.

Do not use an adaptor or plug the product into a shared outlet.

Do not tamper with controls.

If you detect a strange sound, a chemical or burning smell, or smoke coming from the appliance, unplug it immediately, and contact an LG Electronics Customer Information Center.

straight out from the outlet.

Do not grasp the power cord or touch the appliance controls with wet hands.

The air conditioner is not intended for use by young children or invalids without supervision.

Young children should be supervised to ensure that they do not play with the air conditioner.

SAFETY INSTRUCTIONS 5 EN

If water enters the product, turn off the power at the main circuit, then unplug the product and call for service.

If the product has been submerged, contact the LG Electronics Customer Information Center for instructions before resuming use.

Unplug the product when unused for long periods.

Unplug the product before cleaning.

In the event of a gas leak (propane gas, etc.) do not operate this or any other appliance. Open a window or door to ventilate the area immediately.

This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety.

To clean the interior, contact the LG Electronics Customer Information Center or dealer.

Using harsh detergents may cause corrosion or damage to the unit.

Do not use solvent-based detergent on the product. Doing so can cause corrosion or damage,

GROUNDING INSTRUCTIONS

The power cord of this appliance is equipped with a three-prong (grounding) plug. Use this with a standard three-slot (grounding) wall power outlet to minimize the hazard of electric shock. The sure the receptacle is properly grounded. DO NOT CUT OR REMOVE THE THIRD (GROUND)

PRONG FROM THE POWER PLUG.

-Situations when the appliance will be disconnected occasionally; Because of potential safety hazards, we strongly discourage the use of an adapter plug. However, if you wish to use an adapter, a TEMPORARY CONNECTION may be made. Use UL-listed adapter, available from most local hardware stores.

The large slot in the adapter must be aligned with the large slot in the receptacle to assure a proper polarity connection.

Attaching the adapter ground terminal to the wall receptacle cover screw does not ground the appliance unless the cover screw is metal, and not insulated, and the wall receptacle is grounded to make sure the receptacle is properly grounded.

Disconnect the power cord from the adapter, using one hand on each. Otherwise, the adapter ground terminal might break. Do not use the appliance with a broken adapter plug.

-Situations when the appliance will be disconnected often; Do not use an adapter plug in these situations. Unplugging the power cord frequently can lead to an eventual breakage of the ground terminal. The wall power outlet should be replaced by a three-slot (grounding) outlet instead.

6

SAFETY INSTRUCTIONS

CAUTION

To reduce the risk of minor or moderate injury to persons, malfunction, or damage to the product or property when using this product, follow basic precautions, including the following:

INSTALLATION

Take care when installing the product that exhaust or condensation does not damage nearby property.

Follow installation instructions exactly to avoid excessive vibration or water leakage.

OPERATION

This appliance is not intended for use as a precision refrigeration system. Do not use it for special purposes such as maintaining pets, food, precision machinery, or art objects.

When installing or moving the appliance, be careful not to pinch, crush, or damage the power cord.

Make sure the air inlet and outlet are free from obstructions.

Use a soft cloth to clean the appliance. Do not use waxes, thinners, or harsh detergents.

Do not step on or place heavy objects on top of the appliance.

Do not drink water drained from the appliance.

are used simultaneously.

Remove the batteries if the remote control is not to be used for an extended period of time.

Never mix different types of batteries, or old and new batteries for the remote control.

consult a doctor.

Do not recharge or disassemble the batteries.

MAINTENANCE

Never use strong cleaning agents or solvents when cleaning the air conditioner or spray water.

Use a smooth cloth.

SAFETY INSTRUCTIONS 7 EN

REFRIGERANT (FOR R32 ONLY)

WARNING

Do not use means to accelerate the defrosting process or to clean, other than those recommended by the manufacturer.

The appliance shall be stored in a room without continuously operating ignition sources (for

CAUTION

associated with older units. Please follow all precautions and advisories.

-Use caution while handling and prevent damage to unit. Do not put any holes into product for any reason. This can cause damage to product and prevent unit from cooling.

-Maintenance and cleaning of unit should be performed by trained personnel. Failure to properly clean unit can result in damage to the refrigeration system and or the electrical system.

-Make certain that all the air circulation/ventilation openings are free from obstruction.

warranties.

water heaters or furnaces. Also keep away from electric heaters. Damaged units should be repaired before storage.

SAVE THESE INSTRUCTIONS

8 PRODUCT OVERVIEW

PRODUCT OVERVIEW

Key Parts and Components

temperature, and

8

REMOTE CONTROLLER using the bottom drain port.

7

6

INSTALLATION 9 EN

INSTALLATION

Electrical Data

Power cord may include a current interrupter device. TEST and RESET buttons are provided on the plug case. The device should be tested on

TEST button and then the RESET button. If the TEST button does not trip or if the RESET button will not stay engaged, discontinue use of the air conditioner

for 120 V

RESET

TEST

WARNING

This appliance should be installed in accordance with the National Electrical

Code.

Use of extension cords could cause serious injury or death.

- D o n o t u s e a n e x t e n s i o n c o r d w i t h t h i s portable air conditioner.

- D o n o t u s e s u r g e p r o t e c t o r s o r m u l t i o u t l e t adapters with this portable air conditioner.

Never push the TEST button during operation. Doing so can damage the plug.

- D o n o t r e m o v e , m o d i f y , o r i m m e r s e t h i s plug. If this device trips, the cause should be corrected before further use.

Use Wall Receptacle Power Supply

Standard 120 V , 3-wire grounding receptacle rated

15 A / 120 VAC / 60 Hz

Use 15 A, time-delay fuse or 15 A circuit breaker.

CAUTION

The conductors inside this cord are surrounded by shields, which monitor leakage current. These shields are not grounded. Periodically examine the cord for any damage. Do not use this product in the event the shields become exposed.

Avoid shock hazard. This unit cannot be user-serviced. Do not open the tamperresistant sealed portion. All warranties and performance will be voided. This unit is not intended to be used as an ON/OFF switch.

10

INSTALLATION

Before Installation the Air Conditioner

Wireless Remote Control

Inserting Batteries

If the display screen of the remote control begins to fade, replace the batteries. Insert AAA (1.5 V) batteries before using the remote control.

1 Remove the cover on the back of the remote control.

Doing so are they do place the appliance near

2 Insert the new batteries and make sure that the + and - terminals of the batteries are installed correctly.

NOTE

New batteries are supplied with the air conditioner for use in the remote control.

Do not use a rechargeable battery. Make sure that the battery is new.

In order to prevent discharge, remove the battery from the remote control if the air conditioner is not going to be used for an extended period of time.

Keep the remote control away from extremely hot or humid places.

To maintain optimal operation of the remote control, the remote sensor should not be exposed to direct sunlight.

The remote control will not work properly if the unit is exposed to direct light or there is any obstacle between the unit and remote controller.

INSTALLATION 11 EN

Basic Installation Materials Supplied

Shape Parts Name

Hose

Base mounting plate

(58 cm, 1 pcs)

Extension mounting plate (40 cm, 1 pcs)

Extension mounting plate (58 cm, 1 pcs)

Mounting plate screws (4 pcs)

Adhesive short foam weather seals (2 pcs)

Optional French Labels

Shape Parts Name

Mounting plate insulation (2 pcs)

Window gap insulation (1 pcs)

Fixing clips

(2 pcs)

Security brackets

(2 pcs)

Bracket screws

(2 pcs)

L M

Affix label L and M to Panel A if necessary.

English : Lock/Unlock, Indoor

French : Verrouiller/Déverrouiller, Intérieur

Installation Tools

Shape Parts Name

⊕ Driver

Shape

Tape ruler, knife

* Installation tools are not included with the product.

Parts Name

Power drill,

Ø 3 mm drill blade

“No residue” duct tape

50 cm

50 cm

50 cm

NOTE

After installation, the Hose length is approximately 90 cm or less for best performance.

12 INSTALLATION

WINDOW VENT PANEL AND EXTENSIONS

The window installation kit allows you to install the air conditioner in most vertical-sliding windows 58 cm to

153 cm wide, or horizontal-sliding windows from 58 cm to 153 cm high.

Panel A B C

(58 cm) (40 cm) (58 cm)

Fig.

Window open

58 cm

59.5 cm~96.5 cm

99 cm~114.5 cm

117 cm~153 cm

√

√

√

√ √

√

√

√ c d a b

1. For window openings shorter than 58 cm, trim panel

A to fit the opening.

2. For longer window openings, assemble and adjust the panels to fit the window opening. Use Mounting plate screws (included) to fix the panels together at the proper length.

Panel A (58 cm)

1 Window Vent Panel

Panel B(40 cm) Panel C (58 cm)

2 Extension Panels

Mounting plate screws

Mounting plate screws

Window Installation Kit (Includes 1 Window

Vent Panel and 2 Extension Panels)

58 cm 59.5 cm – 96.5 cm

58 cm

For an 58 cm window opening, use the window vent panel (Panel A) by itself.

Fig. a

99 cm – 114.5 cm

99 cm – 114.5 cm

For window openings from 99 cm to 114.5 cm, use the window vent panel (Panel A) and an extension panel (Panel C).

Fig. c

59.5 cm – 96.5 cm

For window openings from 59.5 cm to 96.5 cm, use the window vent panel (Panel A) and an extension panel (Panel B).

Fig. b

Panel C

117 cm – 153 cm

Panel B

Panel B

Panel C

117 cm – 153 cm

For window openings from 117 cm to 153 cm, use the window vent panel (Panel A) and two extension panels (Panel B and Panel C).

Fig. d

INSTALLATION 13 EN

INSTALLATION (VERTICAL)

1 Inserting Panel Assembly

Fit the chassis fixing clips at both ends of the mounting plate.

After adjusting the length of the mounting plate to the chassis height, insert the clip into the window sill.

<Small Windows>

Secure the mounting plate screws in the mounting holes on both sides of the mounting plate.

* If the screw fixing holes do not match, use a power drill to drill the holes (3 mm) in the outer mounting plate in accordance with the inner screw holes.

2 Connecting Vent Hose

Insert the hose into the groove in the insertion direction.

* Refer to the <Positioning Vent Hose> to adjust the hose

Push the hose in the assembling direction to assemble with the mounting plate.

Assembling direction

Inserting direction

14 INSTALLATION

3 Attaching Foam Weather Seals

Cut the mounting plate insulation to the chassis length and insert it on both sides of the mounting plate.

Move the mounting plate to the end of the chassis, close the window and secure it with the security bracket.

Cut the window gap insulation to the window length and insert it into the window gap.

!

CAUTION

Be sure to install the window fixing bracket to prevent the window from opening outside.

4 Positioning Vent Hose

For best results, keep the vent hose as short and straight as possible. However, shape the diffuser end of the vent hose into an inverted U shape just inside the window to allow any rain or condensation to drain out the window.

50 cm

50 cm

Minimum

40 cm

<Best positioning> <inverted U shape> <Correct Installation Position>

INSTALLATION (HORIZONTAL)

1 Attaching Foam Weather Seals

Cut the mounting plate insulation to the chassis length and insert it on both sides of the mounting plate.

(Attaching the foam weather seals to the panel assembly rather than the window sash and frame makes for easier cleanup when removing the panel assembly.)

• NOTE : Take care not to block drain holes in the exterior sill. If necessary, cut slots in the foam seal to allow any moisture to drain out the window sill drains.

INSTALLATION 15 EN

Indoor

Interlor

Indoor

Interlor

Mounting plate insulation

Adhesive short foam weather seals

Mounting plate insulation

2 Inserting Panel Assembly

Insert the panel assembly in the bottom sash channel as in step 2. Use care when installing the assembly, which will now fit very tightly in the opening.

Close the sash tightly against the top of the panel assembly. For a tighter seal, use “no residue” duct tape (not included) to seal any gaps around the installed panel assembly.

• If needed, install the included security bracket with a brack et screws.

Base mounting plate

Extension panel

Security brackets

Bracket screws

3 Sealing Gap between Sashes

Measure and cut the included window gap insulation to fit the window opening. Stuff it between the window sashes to prevent air and insects from getting into the room.

Tip: For a tighter seal, use “no residue” duct tape to seal the gap between the sashes.

16 INSTALLATION

4 Connecting Vent Hose

Align the tabs on the diffuser end of the vent hose to the slots in the panel assembly opening. Insert the diffuser and push it in the Lock direction to assemble with the mounting plate.

• If disconnected, reconnect the other end of the vent hose to the product by inserting the vent hose into the product with the mounting ring facing out. If the hose doesn’t snap into pla ce, rotate it slightly so the 2 lines at the front align.

Mounting ring

Window gap insulation

(2) UnLock lock

(1) Insert

5 Positioning Vent Hose

For best results, keep the vent hose as short and straight as p ossible. However , shape the di ffuser end of the vent hose into an inverted U shape just inside the window to allow any rain or condensation to drain out the window.

50 cm

50 cm

Minimum

40 cm

<Best positioning> <inverted U shape> <Correct Installation Position>

OPERATION 17 EN

OPERATION

Control Panel and Remote Control

Remote Control

8 7 6

1 2 3 9 4 5

1

2

6

Minuteur

Auto

Swing

Incl. auto.

Vit. vent.

4

10

3

7

5

1

2

Power ( )

Press to turn the air conditioner ON or OFF .

Operation Mode

Press the Mode button to cycle between

3 types of air conditioner operation:

Cool / Dry / Fan.

Cool - This mode is ideal on hot days to cool and dehumidify the room quickly. Use the buttons to set the desired room temperature and use the Fan Speed button to set the desired fan circulation speed.

Dry - This mode is ideal for rainy and damp days to dehumidify the room rather removed from the room by the combination of compressor operation and the fan speed off once the set temperature is reached.

Fan speed cannot be adjusted in mode.

Fan - In this mode the fan circulates air but the compressor does not run. Use the Fan Speed button to set fan speed to w. In this mode, you cannot adjust the set temperature.

NOTE

To set the brightness on the control panel, press Mode button on the control

3

Sleep Mode

This mode keeps operating noise to a minimum and turns the air conditioner off after a set time. The timer can be set from

1 to 12 hours.

In the Sleep Mode, the setting temperature increases by 2 °F after 30 minutes and additional 2 °F after another 30 minutes for a more comfortable sleep.

The setting temperature increases up to

4 °F from the preset temperature.

NOTE

Press Sleep button of remote controller can be switched between degrees

4 Fan Speed

5 Auto Swing

This function adjusts the direction of the air flow vertically. Press Auto Swing button repeatedly and select the desired direction.

s

18 OPERATION

6

7

8

9

Delay ON/OFF Timer

Delay ON - When the air conditioner is off, set it to automatically turn on from 1 to 24 hours later, at its previous mode and fan settings.

Delay OFF - When the air conditioner is on, set it to automatically turn off from 1 to 24 hours later.

NOTE

Each press of the Timer button advances the timer by 1 hour. After the last press of the Delay OFF Timer the display returns to the temperature setting.

NOTE

Auto Restart: In case of turning off the air conditioner due to power failure, your unit will resume its last operation several minutes after power is restored.

Removing Condensation

Buildup

Condensation can build up inside the unit when the Cool and Dry modes are used. The fan can be set to run for a short period after the product is turned off to help keep the inside of the appliance dry. This option is off by default.

Temperature Control

To adjust the desired room temperature in

Cool or Dry mode. The desired room temperature can be set between 60˚F-86˚F

(16 °C–30 °C). Press or arrows to increase or decrease temperature setting.

NOTE

Press and button together on the control panel for 3 seconds, the temperature display can be switched between degrees Fahrenheit (ºF) and degrees

Celsius (ºC).

Wi-Fi

Enables connection of the air conditioner to the home Wi-Fi.

To connect Wi-Fi, press the Fan Speed button on the control panel for 3 seconds.

Clean Filter

The Clean Filter LED lights up to notify you

press Sleep button on the control panel for 3 seconds to turn off the Clean Filter light.

NOTE

Turning Condensation Fan On

1

2

3

Turn on the product, set it to Cool mode and let it run for at least 10 seconds.

Press and hold the Auto Swing button for

3 seconds until On appears in the display.

The condensation fan is now turned on.

When the appliance is turned off, Co appears in the display and the fan will continue to run for 10 minutes. The appliance will then shut down as normal.

NOTE

Some functions cannot be used while this option is turned on.

This option must be set using the control panel, not the remote control.

10 control panel, not the remote control.

This feature is a reminder to clean the air filter for more efficient operation. The LED light turns on after 250 hours of operation.

Clear

Cancel Sleep and Timer settings.

NOTE

Press the Clear button on remote controller for 5 seconds, the Smart Diagnosis function works.

Turning Condensation Fan Off

1 When the product is powered ON, press and hold the Auto Swing button for 3 seconds until OF appears in the display.

2 The condensation fan is now turned off.

The appliance will shut down immediately when it is turned off.

SMART FUNCTIONS 19 EN

SMART FUNCTIONS

LG ThinQ Application

This feature is only available on models with the or

ThinQ logo.

The LG ThinQ application allows you to communicate with the appliance using a smartphone.

LG ThinQ Application Features

Communicate with the appliance from a smartphone using the convenient smart features.

Smart Diagnosis TM

If you experience a problem while using the appliance, this smart diagnosis feature will help you diagnose the problem.

Settings

Allows you to set various options on the appliance and in the application.

2

Turn off the Mobile data or Cellular Data on your smartphone.

3

Connect your smartphone to the wireless router.

NOTE

• If you change your wireless router, internet service provider, or password, delete the registered appliance from the LG ThinQ application and register it again.

• The application is subject to change for appliance improvement purposes without notice to users.

• Functions may vary by model.

Before Using LG ThinQ Application

1

Check the distance between the appliance and the wireless router (Wi-Fi network).

• If the distance between the appliance and the wireless router is too far, the signal strength becomes weak. It may take a long time to register or installation may fail.

NOTE

• To verify the Wi-Fi connection, check that icon on the control panel is lit.

• The appliance supports 2.4 GHz Wi-Fi networks only. To check your network frequency, contact your

Internet service provider or refer to your wireless router manual.

• LG ThinQ is not responsible for any network connection problems or any faults, malfunctions, or errors caused by network connection.

• If the appliance is having trouble connecting to the

Wi-Fi network, it may be too far from the router.

Purchase a Wi-Fi repeater (range extender) to improve the Wi-Fi signal strength.

• The Wi-Fi connection may not connect or may be interrupted because of the home network environment.

• The network connection may not work properly depending on the Internet service provider.

• The surrounding wireless environment can make the wireless network service run slowly.

20 SMART FUNCTIONS

• The appliance cannot be registered due to problems with the wireless signal transmission. Unplug the appliance and wait about a minute before trying again.

• If the firewall on your wireless router is enabled, disable the firewall or add an exception to it.

• The wireless network name (SSID) should be a combination of English letters and numbers. (Do not use special characters.)

• Smartphone user interface (UI) may vary depending on the mobile operating system (OS) and the manufacturer .

• If the security protocol of the router is set to WEP , you may fail to set up the network. Please change it to other security protocols ( WPA2 is recommended) and register the product again.

Open Source Software Notice

Information

To obtain the source code under GPL, LGPL, MPL, and other open source licenses, that is contained in this product, please visit http://opensource.lge.com.

In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download.

LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping, and handling) upon email request to [email protected]. This offer is valid for a period of three years after our last shipment of this product. This offer is valid to anyone in receipt of this information.

Installing the LG ThinQ Application

Search for the LG ThinQ application from the Google

Play Store or Apple App Store on a smartphone. Follow instructions to download and install the application.

Industry Canada Statement (For transmitter module contained in this product)

This device contains licence-exempt transmitter(s)/ receiver(s) that comply with Innovation, Science and

Economic Development Canada’s licence-exempt

RSS(s). Operation is subject to the following two conditions:

1) This device may not cause interference.

2) This device must accept any interference, including interference that may cause undesired operation of the device.

IC Radiation Exposure Statement

This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm

(7.8 inches) between the antenna and your body.

NOTE

• THE MANUFACTURER IS NOT RESPONSIBLE

FOR ANY RADIO OR TV INTERFERENCE

CAUSED BY UNAUTHORIZED MODIFICATIONS

TO THIS EQUIPMENT. SUCH MODIFICATIONS

COULD VOID THE USER’S AUTHORITY TO

OPERATE THE EQUIPMENT.

Wireless LAN Module Specifications

Frequency

Range

Output

Power

(Max)

2412 to 2462 MHz

＜ 30 dBm

Smart Diagnosis

TM

This feature is only available on models with the or

logo.

Use this feature to help you diagnose and solve problems with your appliance.

NOTE

• For reasons not attributable to LGE’s negligence, the service may not operate due to external factors such as, but not limited to, Wi-Fi unavailability,

Wi-Fi disconnection, local app store policy, or app unavailability.

• The feature may be subject to change without prior notice and may have a different form depending on where you are located.

Using LG ThinQ to Diagnose Issues

If you experience a problem with your Wi-Fi equipped appliance, it can transmit troubleshooting data to a smartphone using the LG ThinQ application.

• Launch the LG ThinQ application and select the

Smart Diagnosis TM feature in the menu. Follow the instructions provided in the LG ThinQ application.

SMART FUNCTIONS 21 EN

Using Audible Diagnosis to

Diagnose Issues

Follow the instructions below to use the audible diagnosis method.

• Launch the LG ThinQ application and select the

Smart Diagnosis TM feature in the menu. Follow the instructions for audible diagnosis provided in the LG

ThinQ application.

1

Plug the power plug in the outlet properly.

2

Place the mouthpiece of your smartphone close to the or logo.

3

Press and hold the Clear button for 5 seconds or longer while holding the smartphone mouthpiece to the logo until the data transfer is complete.

• Keep the smartphone in place until the data transfer has finished. Time remaining for data transfer is displayed.

4

After the data transfer is complete, the diagnosis will be displayed in the application.

NOTE

• For best results, do not move the phone while the tones are being transmitted.

• Be sure to keep ambient noise to a minimum or the phone may not correctly receive the buzzer beeps from the indoor unit.

22 MAINTENANCE

MAINTENANCE

WARNING

Before cleaning or performing maintenance, disconnect the power supply and wait until the fan stops.

Emptying the Water

Collection Tank

When the internal water collection tank is full, the LED display will show FL and the air conditioner will turn off until the tank is emptied.

• Unplug the air conditioner, disconnect the exhaust hose from the back, and move the air conditioner to a suitable drain location or outdoors. You may also place a pan under the drain that will hold up to 2 pints of water.

• Remove the drain cap from the drain outlet.

• Once the water collection tank is drained, reinstall the drain cap, making sure it is on securely.

• Place the air conditioner in the desired location, reconnect the exhaust hose, and plug in the air conditioner.

NOTE

If you want to disconnect the hose from the product, grasp the mounting bracket on the hose, turn it clockwise or counterclockwise, and then disconnect it easily.

Cleaning the Air Filter

The air filters should be cleaned every two weeks; depending on indoor air quality, more frequent cleaning may be needed. A dirty air filter will decrease airflow and reduce efficiency.

1. Pull out each air filter by the handle.

2. Use a vacuum cleaner to clean the filter.

If the filters are heavily soiled, they can be washed in warm water using a mild detergent.

• Do not use harsh cleaners or very hot

water.

• Do not wash in a dishwasher.

3. Dry the filter in the shade.

4. Reinsert the filters.

Cleaning the Case

Wipe the case with a slightly damp cloth, then wipe dry with a dry cloth or towel.

• To prevent damage to the finish, do not use gasoline, benzene, thinner, etc., or any abrasive cleansers to clean the air conditioner; they may damage the finish.

• Never pour water onto or into the air conditioner. It could damage internal components and create a shock and fire hazard.

TROUBLESHOOTING 23 EN

TROUBLESHOOTING

Before Calling for Service

The appliance is equipped with an automatic error-monitoring system to detect and diagnose problems at an early stage. If the appliance does not function properly or does not function at all, check the following before you call for service.

Normal Sounds You May Hear

1 High-pitched Sound

High efficient inverter compressor may occur high-pitched sound during operation.

2 Sound of Rushing Air

At the front of the unit, you may hear the sound of rushing air being moved by the fan.

3 Gurgle/Hiss

Gurgling or hissing noise may be heard due to refrigerant passing through evaporator during normal operation.

4 Pinging or Swishing

Droplets of water hitting condenser during normal operation may cause pinging or swishing sounds.

24 TROUBLESHOOTING

Problem

Air conditioner does not start.

Air conditioner does not cool as it should.

Air conditioner freezing up.

Possible Cause

The air conditioner is unplugged.

The fuse is blown/circuit breaker is tripped.

Power failure.

The current interrupter device is tripped.

FL appears in the display.

The temp control may not be set correctly.

Solutions

Make sure the air conditioner plug is pushed completely into the outlet.

Check the house fuse/circuit breaker box and replace the fuse or reset the breaker.

If power failure occurs, turn the mode control to off. When power is restored, wait 3 minutes to restart the air conditioner to prevent tripping of the compressor overload.

Press the RESET button located on the power cord plug. If the

RESET button will not stay engaged, discontinue use of the air service technician.

The water collection tank is full.

Drain the tank and reset your settings.

Make sure there are no curtains, blinds, or furniture blocking the front of the air conditioner.

Set the desired temperature to a level lower than the current temperature.

The room may have been hot.

Cold air is escaping.

Cooling coils have iced up.

The cooling coils are iced over.

weeks. See the 'MAINTENANCE' section.

turned on, you need to allow time for the room to cool down.

registers and cold air returns.

See 'Air conditioner freezing up' below.

obstruct the air conditioner from properly cooling the room. Set the mode control at High Fan or High

Cool .

Problem

Water collects in base pan.

Possible Cause

Moisture removed from air and drains into base pan.

Air conditioner turns on and off rapidly.

Noise when unit is cooling.

Outside temperature extremely hot.

Air movement sound.

Remote sensing deactivating prematurely.

Room too cold.

Remote control not located within range.

Remote control signal obstructed.

Set temperature too low.

Can't connect the

LG ThinQ

App. to the air conditioner.

Air conditioner is turned off.

Wireless router is turned off.

The air conditioner is not connecting to the Wi-Fi.

The Wi-Fi router is too far from the air conditioner.

You do not have permission to use the router or it is incompatible.

NOTE

If you see "CH" in the display, please call 1-888-542-2623.

TROUBLESHOOTING 25 EN

Solutions

This is normal for a short period in areas with little humidity; normal for a longer period in very humid areas.

Refer to installation instructions or check with installer.

This is normal. If too loud, adjust the fan speed low.

Place remote control within 20 feet

& 120° radius of the front of the unit.

Remove obstruction.

Increase set temperature.

Turn the air conditioner on.

Turn the router on.

Move the router closer to the air conditioner or purchase and install a Wi-Fi repeater (signal booster).

Make sure you are selecting the correct wireless router from the list.

The router must be set to 2.4 GHz.

26 TROUBLESHOOTING

Wi-Fi

Problem Possible Cause

The password for the Wi-Fi network was entered incorrectly.

Mobile data for your smartphone is turned on.

The wireless network name

(SSID) is set incorrectly.

Trouble connecting appliance and smartphone to

Wi-Fi network.

The router frequency is not 2.4

GHz.

The distance between the appliance and the router is too far.

Solutions

Delete your home Wi-Fi network and begin the registration process again.

Turn off the Mobile data on your smartphone before registering the appliance.

The wireless network name (SSID) should be a combination of English letters and numbers. (Do not use special characters.)

Only a 2.4 GHz router frequency is supported. Set the wireless router to 2.4 GHz and connect the appliance to the wireless router. To check the router frequency, check with your Internet service provider or the router manufacturer.

If the appliance is too far from the router, the signal may be weak and the connection may not be router closer to the appliance or purchase and install a Wi-Fi repeater.

WARRANTY 27 EN

WARRANTY

WHAT THIS WARRANTY COVERS:

LG Electronics Canada, Inc. (“LG”) warrants your LG Room Air Conditioner ("product") against defect in materials or workmanship under normal household use, during the warranty period set forth below, LG will, at its option, repair or replace the product. This limited warranty is (except to some extent in Quebec and where otherwise prohibited) valid only to the original retail purchaser of the product, is not assignable or transferrable to any subsequent purchaser or user, and applies only when the product is purchased through an LG authorized dealer or distributor and used within Canada.

NOTE

Replacement products and repair parts may be new or factory-remanufactured at LG’s option and are warranted for the remaining portion of the original unit’s warranty period or ninety (90) days, whichever is longer. Please retain dated receipt or delivery ticket as evidence of the Date of Purchase for proof of warranty (you may be required to submit a copy to LG or authorized representative). If the Date of

Purchase cannot be verified, the warranty period will begin 15 months from the date of manufacture.

WARRANTY PERIOD:

1 year from the Date of Purchase: Any internal/ functional Parts and Labor.

HOW SERVICE IS HANDLED: In-Home Service or Swap SVC

LG may elect, at our option, to provide Swap or In home Service. To receive in-home service, the product must be unobstructed and accessible to service personnel. If during in-home service repair cannot be completed, it may be necessary to remove, repair and return the product. OR LG may elect, at our option, to provide Swap Service by providing an authorized service exchange through the distribution center you originally purchased the product from.

THIS LIMITED WARRANTY DOES NOT COVER:

Service trips to deliver, pick up, or install or set up the Product; Instruction on Product use.

Adjustments of user controls.

Products that have had a serial number or any part thereof altered, defaced or removed.

Property damages, malfunction or failure of the product, or personal injury caused by or resulting from:

(a) accident, abuse, negligence or misuse;

(b) operating the Product in a corrosive or wet environment containing chlorine, fluorine or any other hazardous chemicals;

(c) installation, alteration, repair or service by anyone other than a licensed, authorized LG contractor or other than pursuant to the manufacturer’s instructions, including installation not in accordance with applicable laws, codes and standards applying in the province in which the Product is installed;

(d) improper matching of Product components;

(e) improper sizing or design of the Product;

(f) improper or deferred maintenance contrary to the manufacturer’s instructions;

(g) physical abuse to or misuse of the Product (including failure to perform any maintenance as described in the Operation Manual such as air filter cleaning, or any Product damaged by excessive physical or electrical stress);

(h) Product used in other than normal use or in any manner contrary to the Operation Manual;

(i) freight damage or damage caused by force majeure or other factors such as power surge damage caused by lightning and fluctuations in or interruptions of electrical power.

28 WARRANTY

THIS LIMITED WARRANTY SHALL NOT BE ENLARGED, EXTENDED OR AFFECTED BY, AND

NO OBLIGATION OR LIABILITY SHALL ARISE OR GROW OUT OF, LG PROVIDING, DIRECTLY

OR INDIRECTLY, ANY TECHNICAL ADVICE, INFORMATION AND/OR SERVICE TO OWNER IN

CONNECTION WITH THE PRODUCT. EXCEPT AS OTHERWISE PROVIDED IN THIS LIMITED

WARRANTY, LG MAKES NO OTHER WARRANTIES OR CONDITIONS OF ANY KIND

WHATSOEVER REGARDING THE PRODUCT. LG DISCLAIMS AND EXCLUDES ALL WARRANTIES

AND CONDITIONS NOT EXPRESSLY PROVIDED HEREIN AND ALL REMEDIES WHICH, BUT

FOR THIS PROVISION, MIGHT ARISE BY IMPLICATION OR OPERATION OF LAW, INCLUDING,

WITHOUT LIMITATION, THE IMPLIED WARRANTIES AND CONDITIONS OF MERCHANTABILITY

AND (EXCEPT IN QUEBEC AND WHERE OTHERWISE PROHIBITED) OF FITNESS FOR ANY

PARTICULAR PURPOSE. NO ONE IS AUTHORIZED TO CHANGE THIS LIMITED WARRANTY IN

ANY RESPECT OR TO CREATE ANY OTHER OBLIGATION OR LIABILITY FOR LG IN CONNECTION

WITH THE PRODUCT. LG DISCLAIMS ALL LIABILITY FOR THE ACTS, OMISSIONS AND CONDUCT

OF ALL THIRD PARTIES (including, without limitation, the installing contractor) IN CONNECTION

WITH OR RELATED TO THE PRODUCT.

UNDER NO CIRCUMSTANCES SHALL LG BE LIABLE FOR ANY INCIDENTAL, SPECIAL, PUNITIVE,

EXEMPLARY OR CONSEQUENTIAL DAMAGES INCLUDING, WITHOUT LIMITATION, LOST

GOODWILL, LOST REVENUES OR PROFITS, WORK STOPPAGE, PRODUCT FAILURE, IMPAIRMENT

OF OTHER GOODS, COSTS OF REMOVAL AND REINSTALLATION OF THE PRODUCT, LOSS OF

USE, INJURY TO PERSONS OR PROPERTY ARISING OUT OR RELATED TO THE PRODUCT

WHETHER BASED ON BREACH OF WARRANTY, BREACH OF CONTRACT, TORT OR OTHERWISE,

EVEN IF LG HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. IN NO EVENT SHALL

LG’S LIABILITY EXCEED THE ACTUAL PURCHASE PRICE OF THE PRODUCT WITH RESPECT TO

WHICH ANY CLAIM IS MADE.

SOME PROVINCES (INCLUDING QUEBEC) DO NOT ALLOW LIMITATIONS ON WARRANTIES OR

EXCLUSIONS OR LIMITATION OF DAMAGES, SO THE ABOVE LIMITATIONS OR EXCLUSIONS MAY

NOT APPLY. Where any term of this warranty is prohibited by such laws, it shall be null and void, but the remainder of this warranty shall remain in effect. THIS LIMITED WARRANTY GIVES THE

OWNER SPECIFIC LEGAL RIGHTS AND THE OWNER MAY ALSO HAVE OTHER RIGHTS THAT

VARY FROM PROVINCE TO PROVINCE.

HOW TO OBTAIN WARRANTY SERVICE & ADDITIONAL INFORMATION:

Call 1-888-LG-CANADA (542 2623) or visit our website at www.lg.com.

Mail to: LG Electronics Canada Inc.

20 Norelco Drive

North York, ON M9L 2X6

FOR YOUR RECORDS

Write the model and serial numbers here:

Model No.

Serial No.

Dealer's Name

Date Purchased

Staple your receipt to this page in the event you need it to prove date of purchase or for warranty issues.

WARRANTY 29 EN

ARBITRATION NOTICE: THIS LIMITED WARRANTY CONTAINS AN ARBITRATION PROVISION THAT REQUIRES YOU AND LG TO RESOLVE

DISPUTES BY BINDING ARBITRATION INSTEAD OF IN COURT, UNLESS THE LAWS OF YOUR PROVINCE OR TERRITORY DO NOT PERMIT

THAT, OR, IN OTHER JURISDICTIONS, IF YOU CHOOSE TO OPT OUT. IN ARBITRATION, CLASS ACTIONS AND JURY TRIALS ARE NOT

PERMITTED. PLEASE SEE THE SECTION TITLED “PROCEDURE FOR RESOLVING DISPUTES” BELOW.

PROCEDURE FOR RESOLVING DISPUTES:

EXCEPT WHERE PROHIBITED AT LAW, ALL DISPUTES BETWEEN YOU AND LG ARISING OUT OF OR RELATING IN ANY WAY TO THIS

LIMITED WARRANTY OR THE PRODUCT SHALL BE RESOLVED EXCLUSIVELY THROUGH BINDING ARBITRATION, AND NOT IN A COURT

OF GENERAL JURISDICTION. EXCEPT WHERE PROHIBITED AT LAW, YOU AND LG BOTH IRREVOCABLY AGREE TO WAIVE THE RIGHT

TO A JURY TRIAL AND TO BRING OR PARTICIPATE IN A CLASS ACTION.

Definitions.

For the purposes of this section, references to “LG” mean LG Electronics Canada, Inc., its parents, subsidiaries and affiliates, and each of their officers, directors, employees, agents, beneficiaries, predecessors in interest, successors, assigns and suppliers; references to “dispute” or

“claim” shall include any dispute, claim or controversy of any kind whatsoever (whether based in contract, tort, statute, regulation, ordinance, fraud, misrepresentation or any other legal or equitable theory) arising out of or relating in any way to the sale, condition or performance of the product or this Limited Warranty.

Notice of Dispute.

In the event you intend to commence an arbitration proceeding, you must first notify LG in writing at least 30 days in advance of initiating the arbitration by sending a letter to LGECI Legal Team at 20 Norelco Drive, North York, Ontario, Canada M9L 2X6 (the “Notice of Dispute”).

You and LG agree to engage in good faith discussions in an attempt to amicably resolve your claim. The notice must provide your name, address, and telephone number; identify the product that is the subject of the claim; and describe the nature of the claim and the relief being sought. If you are unable to resolve the dispute within 30 days of LG’s receipt of the Notice of Dispute, the dispute shall be resolved by binding arbitration in and LG accordance with the procedure set out herein. You and LG both agree that, during the arbitration proceeding, the terms (including any amount) of any settlement offer made by either you or LG will not be disclosed to the arbitrator until the arbitrator determines the dispute.

Agreement to Binding Arbitration and Class Action Waiver.

Upon failure to resolve the dispute during the 30 day period after LG’s receipt of the

Notice of Dispute, you and LG agree to resolve any claims between you and LG only by binding arbitration on an individual basis, unless you opt out as provided below, or you reside in a jurisdiction that prevents full application of this clause in the circumstances of the claims at issue (in which case if you are a consumer, this clause will only apply if you expressly agree to the arbitration). To the extent permitted by applicable law, any dispute between you and LG shall not be combined or consolidated with a dispute involving any other person’s or entity’s product or claim. More specifically, without limitation of the foregoing, except to the extent such a prohibition is not permitted at law, any dispute between you and LG shall not under any circumstances proceed as part of a class or representative action. Instead of arbitration, either party may bring an individual action in small claims court, but that small claims court action may not be brought on a class or representative basis except to the extent this prohibition is not permitted at law in your province or territory of jurisdiction as it relates to the claims at issue between you and LG.

Arbitration Rules and Procedures. To begin arbitration of a claim, either you or LG must make a written demand for arbitration. The arbitration will be private and confidential, and conducted on a simplified and expedited basis before a single arbitrator chosen by the parties under the provincial or territorial commercial arbitration law and rules of the province or territory of your residence. You must also send a copy of your written demand to

LG at LG Electronics, Canada, Inc., Attn: Legal Department- Arbitration, 20 Norelco Drive, North York, Ontario M9L 2X6. This arbitration provision is governed by your applicable provincial or territorial commercial arbitration legislation. Judgment may be entered on the arbitrator’s award in any court of competent jurisdiction. All issues are for the arbitrator to decide, except that, issues relating to the scope and enforceability of the arbitration provision and to the arbitrability of the dispute are for the court to decide. The arbitrator is bound by the terms of this provision.

Governing Law. The law of the province or territory of your purchase shall govern this Limited Warranty and any disputes between you and LG except to the extent that such law is preempted by or inconsistent with applicable federal or provincial/territorial law. Should arbitration not be permitted for any claim, action, dispute or controversy between you and LG, you and LG attorn to the exclusive jurisdiction of the courts of the province or territory of your purchase for the resolution of the claim, action, dispute or controversy between you and LG.

Fees/Costs.

You do not need to pay any fee to begin an arbitration. Upon receipt of your written demand for arbitration, LG will promptly pay all arbitration filing fees unless you seek more than $25,000 in damages, in which case the payment of these fees will be governed by the applicable arbitration rules. Except as otherwise provided for herein, LG will pay all filing, administration and arbitrator fees for any arbitration initiated in accordance with the applicable arbitration rules and this arbitration provision. If you prevail in the arbitration, LG will pay your attorneys’ fees and expenses as long as they are reasonable, by considering factors including, but not limited to, the purchase amount and claim amount. Notwithstanding the foregoing, if applicable law allows for an award of reasonable attorneys’ fees and expenses, an arbitrator can award them to the same extent that a court would. If the arbitrator finds either the substance of your claim or the relief sought in the demand is frivolous or brought for an improper purpose

(as measured by the applicable laws), then the payment of all arbitration fees will be governed by the applicable arbitration rules. In such a situation, you agree to reimburse LG for all monies previously disbursed by it that are otherwise your obligation to pay under the applicable arbitration rules.

Except as otherwise provided for, LG waives any rights it may have to seek attorneys’ fees and expenses from you if LG prevails in the arbitration .

Hearings and Location. If your claim is for $25,000 or less, you may choose to have the arbitration conducted solely (1) on the basis of documents submitted to the arbitrator, (2) through a telephonic hearing, or (3) by an in-person hearing as established by the applicable arbitration rules. If your claim exceeds $25,000, the right to a hearing will be determined by the applicable arbitration rules. Any in-person arbitration hearings will be held at the nearest, most mutually-convenient arbitration location available within the province or territory in which you reside unless you and LG both agree to another location or agree to a telephonic arbitration.

Severability and Waiver. If any portion of this Limited Warranty (including these arbitration procedures) is unenforceable, the remaining provisions will continue in full force and effect to the maximum extent permitted by applicable law. Should LG fail to enforce strict performance of any provision of this Limited Warranty (including these arbitration procedures), it does not mean that LG intends to waive or has waived any provision or part of this

Limited Warranty.

30 WARRANTY

Opt Out.

You may opt out of this dispute resolution procedure. If you opt out, neither you nor LG can require the other to participate in an arbitration proceeding. To opt out, you must send notice to LG no later than 30 calendar days from the date of the first consumer purchaser’s purchase of the product by either (i) sending an e-mail to [email protected], with the subject line: “Arbitration Opt Out;” or (ii) calling 1-800-980-2973. You must include in the opt out e-mail or provide by telephone: (a) your name and address; (b) the date on which the product was purchased; (c) the product model name or model number; and (d) the serial number (the serial number can be found (i) on the product; or (ii) online by accessing https://www.lg.com/ca_en/support/repair-service/schedule-repair and clicking on “Find My Model & Serial Number”).

In the event that you “Opt Out”, the law of the province or territory of your residence shall govern this Limited Warranty and any disputes between you and LG except to the extent that such law is preempted by or inconsistent with applicable federal or provincial/territorial law. Should arbitration not be permitted for any claim, action, dispute or controversy between you and LG, you and LG agree to attorn to the exclusive jurisdiction of the courts of the province or territory of your residence for the resolution of the claim, action, dispute or controversy between you and LG.

You may only opt out of the dispute resolution procedure in the manner described above (that is, by e-mail or telephone); no other form of notice will be effective to opt out of this dispute resolution procedure. Opting out of this dispute resolution procedure will not affect the coverage of the Limited

Warranty in any way, and you will continue to enjoy the full benefits of the Limited Warranty. If you keep this product and do not opt out, then you accept all terms and conditions of the arbitration provision described above.

Conflict of Terms.

In the event of a conflict or inconsistency between the terms of this Limited Warranty and the End User License Agreement

(“EULA”) in regards to dispute resolution, the terms of this Limited Warranty shall control and govern the rights and obligations of the parties and shall take precedence over the EULA.