kincrome K7710 Operation Manual

Add to My manuals
5 Pages

advertisement

kincrome K7710 Operation Manual | Manualzz
TOOL CHEST 10 DRAWER
Part No. K7710
Castors (2)
Automatic Drawer Retention
Castors
Ensure drawers are fully
closed prior to closing lid
and locking the chest
Castors (2)
Keys x 2
11 x Liners
TOOLS & ASSISTANCE NEEDED
2 People Lift
1
TOOL CHEST 10 DRAWER
Part No. K7710
1&2
3
4
13
5
15
10
8
7
11
12
6
9
14
REPLACEMENT PARTS
ITEM
PART NO.
DESCRIPTION
QUANTITY
ITEM
PART NO.
DESCRIPTION
QUANTITY
1
K7777
Lock & Key
1
9
K7758-9
Small Drawer
1
2
K7779
Key Only (Specify Key Number)
1
10
K7758-10
Large Drawer (Shallow)
1
3
K7758-3
Gas Strut
2
11
K7758-11
Large Drawer (Deep)
1
4
K7758-4
Top Mould Edge (1)
1
12
K7758-12
Eva Mat Pack (8)
8
5
K7758-5
Side Carry Handle (1)
2
13
K7758-14
Handle Cover
1
6
K7748-15
Ball Bearing Slide Set (2)
2
14
K7758-15
Rubber Feet (4)
4
7
K7758-7
Alum Drawer Grip (Small) (Black)
1
15
K7759-11
Small Drawer (Shallow)
1
8
K7758-8
Alum Drawer Grip (Large) (Black)
1
Warranty given by Kincrome Tools & Equipment Pty Ltd of 3 Lakeview Drive, Caribbean Park, Scoresby, Victoria, Australia (Tel +61 3 9730 7100) If this product has materials or workmanship defects (other than defects caused by abnormal or
non warranted use) you can, at your cost, send the product to place of purchase, an authorised Kincrome service agent or one of Kincromes addresses for repair or replacement. Your rights under this warranty are in addition to any other rights
you have under the Australian, United Kingdom & Ireland Consumer Law or other applicable laws. Our goods come with guarantees that cannot be excluded under the Australian, United Kingdom & Ireland Consumer Law. You are entitled to a
replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not
amount to a major failure. For further details please visit www.kincrome.com.au or call us. Due to minor changes in design or manufacture, the product you purchase may sometimes differ from the one shown on the packaging.
National Head Office
National Distribution and Showroom
3 Lakeview Dve, Caribbean Business Park
nistration
Customer Service Centre
Scoresby Victoria 3179 Australia
) 9730 7100 F (03) 9730 7199
T 1300 657 528 F 1300 556 005
ABN 41 007 185 006
Administration
T (03) 9730 7100 F (03) 9730 7199
Customer Service Centre
T 1300 657 528 F 1300 556 005
E [email protected]
W kincrome.com.au
2
Made
to Kincrome Tools & Equipment Pty Ltd Global
E [email protected]
specifications and quality standards in China
W kincrome.com.au
Australia & Global
UK & EU
www.kincrome.com.au
www.kincrome.co.uk
[email protected] [email protected]
TOOL TROLLEY 12 DRAWER
Part No. K7712
TOOL TROLLEY 7 DRAWER
Part No. K7747GT
8 x Hex Bolts for
8 x Hex Bolts
for
Push Handle
Non-Locking
Castors
(2) (Non Locking)
Castors (2) 2 x Spring
Loaded
Castors
Trolley Handle
Castors (2)
17mm Bolts
Castors
(16) for
Castors
Castors
16 x 17mm Bolts
Castors
for Castors Castors (2)
Castors
2 x Spring
Castors (Locking)
LockingLoaded
Castors (2)
Castors (2)
Gas Struts (2)
Gas Struts (2)
Power Handle (1)
Handle (1)
TITLE:
TITLE:
1_HandleAssy_POWERBOARD
UNLESS OTHERWISE
SPECIFIED, DIMENSIONS
ARE IN MILLIMETERS
COPYRIGHT © 2014. ALL WORK PROPERTY OF KINCROME.
DRAFTING
STANDARD
AS100
DO NOT SCALE DRAWING
Trolley Handles x 1
Power Handles x 1
DWG NAME:
chris power 1
DRWN BY: Dylan Luxa
A3
UNLESS OTHERWISE
SPECIFIED, DIMENSIONS
ARE IN MILLIMETERS
COPYRIGHT
© 5/09/2014
2014. ALL WORK PROPERTY
OF1KINCROME.
DO NOT
DATE:
SHEET:
OF 1
SCALE:
1:6 SCALE DRAWING
1_HandleAssy_POWERBOARD
DRAFTING
STANDARD
AS100
DWG NAME:
A3
chris power 1
DRWN BY: Dylan Luxa
DATE: 5/09/2014
SHEET: 1 OF 1
Keys x 2
7 x Liners
TOOLS/ASSISTANCE NEEDED
12 x Liners
17mm Spanner
5mm Hex Key
1
TOOLS & ASSISTANCE NEEDED
2 People
1
17mm Spanner
Hex Key
SCALE: 1:6
TOOL TROLLEY 12 DRAWER
Part No.
K7712 7 DRAWER
TOOL
TROLLEY
Part No. K7747GT
Step 1: Assembly Preparation
Remove all contents from box. Reference the parts list to
make sure you have all the parts.
Place a cover on the floor to prevent any damage to surface of the Trolley.
Castors are prefitted on large trolleys.
Step 2: Attaching Castors
Using two people, tip the trolley so it is laying drawer side up.
Align holes in locking and non-locking Castors with matching
holes in the bottom tray as shown in figure 2. Attach using
16 x 17mm Hex bolts, lock washers and flat washers from
Castor bolt kit and tighten.
8 x Hex Bolts for
Push Handle
Castors (2)
Ensure that both locking Castors are on same end of the Trolley.
We recommend mounting locking Castors at the front of the Trolley.
Castors
17mm Bolts
Castors
(16) for
Castors
Locking Castors (2)
Castors (2)
Step 3: Attaching the Side Handles
Align the mounting holes of the handle brackets with the holes
on the side of the Trolley. Attach using the Hex Bolts
Non-Locking Castors (2)
Gas Struts (2)
Power Handle (1)
Handle (1)
TITLE:
TITLE:
1_HandleAssy_POWERBOARD
UNLESS OTHERWISE
SPECIFIED, DIMENSIONS
ARE IN MILLIMETERS
COPYRIGHT © 2014. ALL WORK PROPERTY OF KINCROME.
DRAFTING
STANDARD
AS100
DO NOT SCALE DRAWING
DWG NAME:
chris power 1
DRWN BY: Dylan Luxa
A3
UNLESS OTHERWISE
SPECIFIED, DIMENSIONS
ARE IN MILLIMETERS
COPYRIGHT
© 5/09/2014
2014. ALL WORK PROPERTY
OF1KINCROME.
DO NOT
DATE:
SHEET:
OF 1
SCALE:
1:6 SCALE DRAWING
1_HandleAssy_POWERBOARD
DRAFTING
STANDARD
AS100
DWG NAME:
A3
chris power 1
DRWN BY: Dylan Luxa
DATE: 5/09/2014
SHEET: 1 OF 1
7 x Liners
Automatic Drawer Retention
TOOLS/ASSISTANCE NEEDED
Ensure drawers are fully
closed prior to closing lid
and locking the chest
17mm Spanner
2
5mm Hex Key
SCALE: 1:6
TOOL TROLLEY 12 DRAWER
Part No. K7712
1
4
5
2&3
20
7
16
8
6
10
12
9
11
15
17
13
14
REPLACEMENT PARTS
ITEM
PART NO.
DESCRIPTION
QUANTITY
ITEM
PART NO.
DESCRIPTION
QUANTITY
1
K7759-1
MDF Wood Top
1
10
K7759-11
Drawer Small (Shallow)
1
2
K7778
Lock & Key
1
11
K7759-13
Drawer Small (Deep)
1
3
K7779
Key Only (Specify Key Number)
1
12
K7747-16
Ball Bearing Slide Set (2)
2
4
K7759-4
Plastic Trolley Top
1
13
K7860-18
Swivel Castor Pack (2)
2
5
K7759-5
Trolley Handle (1)
1
14
K7860-19
Swivel Castor Pack (2) Brake
2
6
K7758-7
Alum Drawer Grips (Pack x 3) (Black)
3
15
K7759-17
Castor Nut & Bolt
1
7
K7759-7
Drawer Extra Long
1
16
K7759-18
Folding Side Shelf
1
8
K7759-8
Drawer Large (Shallow)
1
17
K7759-19
Eva Mat Pack (8)
8
9
K7759-10
Drawer Large (Deep)
1
18
K7741
Power Handle
1
Warranty given by Kincrome Tools & Equipment Pty Ltd of 3 Lakeview Drive, Caribbean Park, Scoresby, Victoria, Australia (Tel +61 3 9730 7100) If this product has materials or workmanship defects (other than defects caused by abnormal or
non warranted use) you can, at your cost, send the product to place of purchase, an authorised Kincrome service agent or one of Kincromes addresses for repair or replacement. Your rights under this warranty are in addition to any other rights
you have under the Australian, United Kingdom & Ireland Consumer Law or other applicable laws. Our goods come with guarantees that cannot be excluded under the Australian, United Kingdom & Ireland Consumer Law. You are entitled to a
replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not
amount to a major failure. For further details please visit www.kincrome.com.au or call us. Due to minor changes in design or manufacture, the product you purchase may sometimes differ from the one shown on the packaging.
National Head Office
National Distribution and Showroom
3 Lakeview Dve, Caribbean Business Park
nistration
Customer Service Centre
Scoresby Victoria 3179 Australia
) 9730 7100 F (03) 9730 7199
T 1300 657 528 F 1300 556 005
ABN 41 007 185 006
Administration
T (03) 9730 7100 F (03) 9730 7199
Customer Service Centre
T 1300 657 528 F 1300 556 005
E [email protected]
W kincrome.com.au
Made
to Kincrome Tools & Equipment Pty Ltd Global
E [email protected]
specifications and quality standards in China
W kincrome.com.au
Australia & Global
UK & EU
www.kincrome.com.au
www.kincrome.co.uk
[email protected] [email protected]
3

advertisement

Related manuals

Download PDF

advertisement