advertisement
SVT-
MF 4
Outdoor Station
A
User Manual
Please read this user manual prior to installing the system, and keep it well for future use.
CONTENTS
1. Parts and Functions..................................................................................
.
...........
1
2. Terminal Descriptions ..........................................................................................
2
3. Specification s...
....................................................................................................
3
4.
Mounting .........................................................................................
.
.....................
3
4 .1
Mounting without the Rain Guard ........
.
...............
......
.............
....
...........
.
...
.
......
3
4 .2 Mounting with the Rain Guard........
................
......
......
...........
...............
.
.
.
...
.
.....
4
4 .
3 Mounting the Indoor Monitor.
.................
......
..
....................
....................
.
.
........
4
5. System Wiring and Connections .........................................................................
5
5.1
SVT-4 System with one entrance ..................
.
...............
......
.............
.....
...
.
......
5
5.2 SVT-4 System with two entrances .............................
......
......................
.
........
6
5.
3 SVT-4 Wiring Connection ..................
.
...............
....................
.............
.....
......
7
5.
3 .1
Indoor Station....................
..................
.
...............
.............
.............
.....
......
7
5.
3 .2
Outdoor Station.................
..................
.
..............
..............
.............
.....
..
..
..
7 -8
5.
3 .
3 Electric door lock connection ..........
....
.
..............
..............
.............
.....
......
9
6.
Cable Requirements .............................................................
..................
..
.
.........
10
7. User Instructions . .......................
.........................................
...............................
1 1
7 .1
Visitor calls ...................................
..................
.
..............
......
.............
......
...
.
...
1 1
7 .2 Monitor .........................................
.............................
......
......................
.
.......
1 2
7 .
3 Intercom .............
...........................
.....
.
...............
....................
.............
.....
.....
1 3
1.Parts and Functions
#
1
2
3
4
5
6
Description
LED lights
High resolution camera
Built-in speaker
Call button
Built-in microphone
Name plate
Status light.
Calling in: red light
Monitoring/Talking: blue light
3
# Description
3
4
1
2
5
6
Built-in microphone
Monitor button
Intercom button
Door unlock button
Talk button
TFT 7” color display
7
8
Built-in speaker
Talking/Ring volume
9 Brightness
10 Contrast
-1-
-2-
2.Terminal Descriptions
3.Specification
s
OUTDOOR STATION
Voltage : DC 14.5V
NO /NC /COM : Max. 14.5V 2 0 0mA
Lock Power Supply: Must be used according to lock.
Unlocking time: 01 - 35 seconds with SVT-TD20G device
Communication duration: 120s.
Communication transmission : 2-way comm unication
Working temperature: -4°F to 131°F / -20°C to +55°C
INDOOR MONITOR
Voltage : DC 14.5V
Communication duration: 120s.
Communication transmission : 2-way comm unication
Working temperature: 14°F to 131°F / -10°C to 55°C
4.Mounting
4 .
1 .
MOUNTING WITHOUT THE RAIN GUARD
1 2
Install in to the wall
Screw hole
160-165 cm
Screws
(fix with button case)
-3-
-4-
4 .
2 .
MOUNTING WITH THE RAIN GUARD
Wall hole
Screw anchors
Rain cover
Screws
4 .
3 .
MOUNTING THE INDOOR MONITOR
Screws
(fix with rain cover)
5.
System Wiring and Connections
5.1.
SVT -MF 4 SYSTEM WITH ONE ENTRANCE
-5-
-6-
5.2.
SVTMF 4 SYSTEM WITH TWO ENTRANCES
5.3. SVT-4 WIRING CONNECTION
5.3.1
Indoor Monitor
1. Red 2. Blue 3. Yellow
1-Audio 2-GND 3-V+
4. White
4-Video
1. Red
2. Blue
3. Yellow
4. White
1. Red
2. Blue
3. Yellow
4. White
CN1: Connect to the first Outdoor Station
CN2: Connect to the second Outdoor Station
NOTE: Do not remove any of the jumpers from the back of the indoor monitors.
By removing a jumper or changing its position, some of the features may not work properly.
5.3.2 Outdoor Station
Upper module:
CN1
:
Must remain connected to CN10 port on the lower module.
Lower module:
PWR: Connect a SVT-MF4 PS17 Power supply.
J3: Use this port to connect a door lock.
The door lock is limited to 14.5V, 200mA.
Must use an additional power supply for the door lock. Ensure the power supply is compatible with the door lock specifications.
The J3 output is also DRY contact (NO/COM/NC).
CN10: Must remain connected to J1 port on the upper module.
CN22: Reserved port.
JP1: Remove the black jumper if a access control unit is connected to the outdoor station
(SVT-3100 / SVT-4100 / SVT-5100 Access Control System only).
J1: Connect the access control unit (SVT-3100 / SVT-4100 / SVT-5100 Access Control
System only).
CN3: Reserved port.
CN2: Connect to the indoor monitor (Upper call button )
CN1: Connect to the indoor monitor (Lower call button )
-7-
-8-
5.3.3 Electric Door Lock Connection
1. Use the port J3 of the lower module to connect a door lock.
2. The door lock is limited to 14.5V, 120mA.
3. Must use an additional power supply for the door lock. Ensure the power supply is compatible with the door lock specifications.
-9-
-10-
6 .Cable Requirements
Cable Usage A B
CAT5 cable ( must solder the wires together to ensure a good connection ) .
Using different cables may affect the maximum distance the system can reach.
2 3 0 feet
7 0 meters
30 feet
1 0 meters
NOTE:
1.
The system expands to a maximum of 2 outdoor stations and 4 indoor monitors.
2. Each indoor monitor requires its own power supply(14.5V, 1.3A)
3. We recommend soldering the wires together to ensure a good connection (Do not use wire nuts).
4 . For long runs typically longer then 90ft, we recommend using coax cable for the video function.
A
B
7.
User instructions
7.1
Visitor calls
The visitor presses the call button on outdoor station-1
The visitor presses the call button on outdoor station-2
Ring Ring
The visitor image shown on the monitor
Press the call button at anytime, the indoor monitor will show the view from the front door camera automatically. Press talking button to have communication with the visitor by the front door.
Talk begins
Check
Open the lock
After pressing the unlocked button, the indoor monitor still displays the image from the front door camera.
The talk time is up to 2 minutes
Press the TALK button or hang-up the handset
End the call
-1 1 -
-1 2 -
7.
2 Monitor
Press the monitor button
Press once
Monitor outdoor station 1
The indicator light of
Door 1 is on.
Press the talk button
Press twice
Monitor outdoor station 2
The indicator light of
Door 2 is on.
Press the monitor button
Monitor the outdoor station
Press the talk button
End the monitor
Call transferring from main indoor monitor to extension indoor monitor
During the between the station and conversation outdoor the indoor the main indoor monitor.
monitor, press button on
All indoor monitors ring
The indoor monitor press button again to end the conversation.
Any indoor monitor press button or pick up the handset to talk with the outdoor station.
7.3
Intercom
In the standby mode, press button intercom in any indoor monitor
All indoor monitors ring
Any indoor monitor presses button or pick up the handset to talk.
Talk begins
Press the TALKPress the
TALKING button or hang-upbutton or hangup the handsetthe handset
End the call
During the talking, any indoor monitor presses the intercom button
-1 3 -
The design and specifications of this user manual can be changed without any notification to the user.
All copyright and interpretation rights are reserved to SVT Innovations Inc.
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement