MEETUS - C400

Operation Manual

www.meetns.com

3.

4.

5.

1.

MEETUS-C400 Wireless Network System

Contents

Installation

2.

Features

Front Panel Information

Rear Panel Information

Specifications

www.meetns.com

MEETUS-E400 Wireless Network System

1. Installation

Before Using

This is for content to prevent damage of property and to protect user, please read surely and use rightly.

Caution

This installation(Caution for using safety) is including the content of variable equipment generally, so there can be included a content not to accord with an equipment as customer had.

There is a part to be overlapped with manual in each clause.

Designation : Don’t disassemble

Meaning : Mark that is a risk etc when

disassembling.

Absolutely don’t separate, repair and restructure.

Designation : Unplug Power Code.

Meaning : Mark that is asking End User

separate Power Code from AC outlet.

Immediately ask A/S repair when dam a ging Power Code (It may have unexpected safety accident like electric shock, fire etc.

Firmly fix Power plug not to shake (It may be caused by fire in case of having unstable connection.

Take care not to come in water or not to touch with water and don’t touch it with wet hand.

(It may be caused by electric shock)

Don’t install the place where has a lot of humidity, dust and soot.

(It may be caused by fire and electric shock)

-10c

벤젠

+40c

Don’t put a container on goods like vase, flowerpot, cup, cosmetics, chemicals and water etc.

(It may be caused by fire, electric shock and injury due to coming down)

Don’t install the place where is low temperature of -10℃ below or high temperature of +40℃ over.

(It may be caused by defect or degradation of goods)

Softly wipe surface of goods with dried washcloth. Absolutely don’t use chemicals or abstergent and it may peel up its paint or go bad with surface.

Firmly fix Power plug not to shake (It may be caused by fire in case of having unstable connection./

Stop using when happening smoke or getting strange smell, unplug the power code immediately and contact A/S center.

(If disregard this, it may be caused by fire or electric shock)

Install the goods to airy place.

Don’t drop goods or have shock and put goods away from the place where is hard vibration or a kind of magnet.

01 www.meetns.com

MEETUS-E400 Wireless Network System

1. Installation

Caution

Keep using Power and Voltage to be indicated, otherwise there is the risk like electric shock, fire.

This equipment has limitation of power to supply from AC outlet, so use total power consumption not to exceed power to be indicated. (This is caused by fire)

Take the space of 100mm from wall at least in case of installation this equipment and the interval for radiation with other equipment. Carefully read each manual when installing at rack and take its interval according to manual. (It is caused by fire)

In case of having a stroke of thunder, unplug power code and disconnect connected wire to be connected to equipment like antenna wire, phone wire etc. (It is caused by electric shock)

Don’t block the ventilation of equipment. (Because of internal heat, it may be caused by fire)

Don’t turn equipment inside out and lay equipment on.

Don’t use at confined place where is not airy except exclusive rack and to push equipment in.

Don’t use equipment on rug or blanket.

Don’t put slopping and shaking place. (It is caused by injury when falling)

Be careful not to put children in front of cassette tape, disk.

Be careful not to play children with packing box and material. ( It is caused by injury)

Don’t close power code to heating equipment. (It is caused by melting the sheath of code or by fire, electric shock)

Unplug plug with holding surely, don’t hold power code when separating.

Unplug the plug after turn it off surely when moving.

Firstly Separate antenna wire, connection code and external code etc when moving.

Firstly Remove CD, Cassette tape and video cassette when moving.

Do clean after unplugging the plug. (It may be caused by electric shock)

Firmly unplug the power code for safety when not using for long time.

Speak to Custom Service or purchasing Agency for internal cleaning at one per 2~3 years. In case of having a lot of dust, it may be caused by fire or not working. Specially, it will be very effective if you do it before coming rainy season.

Minimize Volume level before power on.

Use the AC outlet that has earth connection.

Caution when installing Rack

Install the equipment away from Tuner if possible.

Don’t install the equipment on power amplifier.

Don’t lean when installing Rack.

Warranty Period

Hereby guarantee our equipment in free A/S for 1 year from purchasing date. However if its trouble is caused by consumer, or by natural disaster even though it is in free A/S period, its A/S charge should be requested.

02 www.meetns.com

2. Features

MEETUS-C400 Wireless Network System

7 INCH WIDE TFT LCD PANEL WITH FULL TOUCH SCREEN.

NETWORK CONTROL FOR ALL FUNCTION.

(CONTROL POSSIBILITY FROM MASTER CONTROL ROOM)

INTERGRATED CONTROL SYSTEM,

MOVEMENT CONTROL (2CH),

LIGHTING CONTROL (2CH),

AUDIO MIXER CONTROL (4CH IN/OUT, 4x4 MIXING,

STEREO, 3BAND EQ),

VIDEO MATRIX (4x4 RGB SWITCHER),

POWER AMPLIFIER MONITOR (FEEDBACK FOR 4CH),

CUE RESERVATION/ CONTROL

EXTENSION USING USB SLOT FOR ADDING VOLUME, LIGHTING AND

MOVEMENT CONTROL CHANNEL.

USB FOR COMMUNICATION BETWEEN UNITS, NETWORK SYSTEM FOR

COMMUNICATIOIN WITH SEVER PC.

03 www.meetns.com

MEETUS-C400 Wireless Network System

3. Front Panel Information

1 2

3

Moving to SETUP menu and setting each function with touch screen.

Doing UP function for volume, lighting brightness and movement control.

Doing DOWN function for volume, lighting brightness and movement control.

Muting sound.

04 www.meetns.com

MEETUS-C400 Wireless Network System

4. Rear Panel Information

1 2 3 4 5

6 7 8 9

Switch for turn on/off.

Terminal to connect ground wire.

・ Terminal for 2CH movement control.

・ Terminal for 2CH lighting control.

4CH power amplifier input terminal for monitoring.

INPUT(4CH): Video input terminal.

INPUT(4CH): Video input terminal.

Terminal for external input.

PD : Terminal supplying dry contact connecting with DPD-1307.

EX-1/2 : Terminal for dry contact of external device.

GND : COM terminal using when doing dry contact to each terminal.

Terminal to control projector.

10 11 12

Terminal for program update.

Physical switch to return to setting mode.

Terminal to communicate with sever connecting network.

05 www.meetns.com

MEETUS-C400 Wireless Network System

5. Specifications

NOTE

Specifications and design subject to change without notice for improvements.

■ AUDIO MATRIX

INPUT CHANNEL : 4 CHANNELS STEREO

INPUT CHANNEL : 4 CHANNELS STEREO

INPUT EQ: BASS : -14dB ~ +14dB

MIDDLE : -14dB ~ +14dB

TREBLE : -14dB ~ +14dB

INPUT VOLUME : -79dB ~ 0dB

INPUT GAIN : 0 ~ 30Db

OUTPUT CHANNEL : 4 CHANNELS STEREO

OUTPUT VOLUME : -79dB ~ 0dB

S / N : OVER 80dB

THD : UNDER 0.5%

FREQUENCY RESPONSE : 20Hz ~ 20KHz(+/- 3dB)

■ RGB SWITCHER

INPUT : 4CH, RGB VIDEO 75Ω 1Vｐ-ｐ, HD, VD SYNC 1~4ｐ-ｐ, TTL

OUTPUT : 4CH, RGB VIDEO 75Ω 1Vｐ-ｐ, HD, VD SYNC 1~4ｐ-ｐ, TTL

■ DIMMER

CIRCUIT : 2 CIRCUITS

POWER : AC 220V/4A, 60Hz

■ MOVEMENT

CIRCUIT : 2 CIRCUIT

POWER : AC 220V/4A, 60Hz

■ GENERAL

COMMUNICATION : LAN

DIMENSION(WxHxD) : 482(W)x132(H)x277(D)mm

WEITGHT : 5kg

※This product specifications and specifications to improve performance, there may be some changes.

06 www.dlogixs.com

ZZZPHHWQVFRP

ą$''5(66

'ORJL[V%OG$Q\DQJ0DQDQ*X$Q\DQJ6L

*\HRQJJL'R.RUHD

ą7(/ ą$6 ą)$; ą(PDLO

VDOHV#GORJL[VFRP