GTWN5250D
GE
®
3.9 DOE cu. ft. stainless steel capacity washer
Dimensions and Installation Information (in inches)
Circuit Requirements: An individual, properly-grounded branch circuit, with a three-prong grounding-type receptacle, protected by a 15 or 20 amp circuit breaker or a time-delay fuse, is required.
Electrical Rating: 120V, 60Hz, 10A
Note: Washer wall outlet must be located within 36" of service code entry. Wall outlet must not be located behind dryer.
Installation Information: Before installing, consult installation instructions packed with product for current dimensional data.
25-1/2
42
51
36
Side View
27
Rear View
For answers to your Monogram, ® GE Profile ™ or
GE ® appliance questions, visit our website at geappliances.com or call GE Answer Center ® service, 800.626.2000.
Listed by
Underwriters
Laboratories
Specification Revised 8/12 360110
GTWN5250D
GE
®
3.9 DOE cu. ft. stainless steel capacity washer
Features and Benefits
• ENERGY STAR ® qualified —meets or exceeds federal guidelines for energy efficiency for year-round energy and money savings
• HydroWave ® Quiet Agitator wash system—longer, slower travel provides gentle, thorough cleaning
• Rotary electronic controls with cycle status lights provide accurate cycle times
• 10 wash cycles handle various fabrics and soils
• PreciseFill with the option of 4 water level selections will automatically measure the load size and add just the right amount of water
• Bleach and fabric softener dispensers automatically operate with wash cycle
• 700-RPM spin speed—fast spin speeds remove water efficiently and minimize dry times
• Model GTWN5250DWW – White
Modified Energy Factor (MEF) 2.0
Water Factor (WF) 6.0
Specification Revised 8/12 360110