GVA GVAFLED32 Instruction Manual

32” (80cm)
FHD LED LCD TV
/ GVAFLED32
Instruction Manual
2
Contents
Preface
4
Safety Precautions
4
Important Safety Instructions
7
In the Carton
10
Connections and Functions
11
Basic Installation
12
Remote Control
16
Remote Control Setup
22
Using the Remote Control
22
Basic Operation
23
First Time Installation
24
Input Source
25
Information Display
25
Picture Mode
25
Sound Mode
25
Audio Language
25
Sleep Timer
25
EPG (Electronic Program Guide)
26
PVR and Time Shift Operation
27
Setting up and Connecting a Storage Device
27
PVR File System
27
Speed
28
Record Start
29
Time Recorder
29
Viewing Recorded Programs
30
Time Shift Mode
31
The On-Screen Display (OSD) Menu
32
Menu Options on TV Mode
33
Channel Menu
33
Picture Menu
34
Sound Menu
35
Time Menu
37
Lock Menu
38
3
Contents
Setup Menu
40
Menu Options in PC Mode
42
Media (USB) Mode
43
Specifications
46
Wall Mounting Instructions
47
Care and Maintenance
48
Responsible Disposal
49
FAQs
50
4
Preface
Thank you for building
buying this
thisTV!
TV!Please
Pleaseread
readthis
thismanual
manualthoroughly
thoroughlybefore
beforeoperating
operatingthe
theTV.
TV.
the TV
TV was
was not
not damaged
damaged in
in transit.
transit.Should
If the TVthe
is damaged,
do not
it andit and
Make sure the
TV is damaged,
doinstall
not install
your dealer.
dealer. Check
Check that
that you
you have
haveall
allthe
of the
accessories
supplied
this unit.
contact your
accessories
according
towith
the model.
Safety Precautions
Put the
theTV
TV on
onaastable
stablesurface.
surface.
Put
Do
material
Do not
not place
place any
anything
on on
thethe
TV.TV.
Do
Do not
not use
use the
theTV
TVwith
withfixtures
fixturesother
otherthan
thanthose
thoseprovided
providedor
suggested
by
the
manufacturer.
or suggested by the manufacturer. Always leave some space
around the appliance, at least a few centimeters.
Do not block or cover the ventilation openings on the TV. If
you
have
a wall
check
that it isopenings
steady. on the TV. If
Do not
block
ormount,
cover the
ventilation
you have a wall mount, check that it is steady.
55
Safety
SafetyPrecautions
Precautions(Cont.)
(Cont.)
Power
cord
and
cables
must
bebe
properly
routed
and and
protected
The
power
cord
and
cables
must
properly
inserted
to prevent
stepping
on themon
andthem
causing
protected
to people
preventfrom
people
from stepping
or the TV
to fall. the TV to fall.
causing
Keep
Keepthe
theTV
TVdry
dryand
andaway
awayfrom
fromhumidity.
humidity.
Keep
Keepthe
theTV
TVaway
awayfrom
fromheat
heatsources.
sources.
Unplug
Unplugthe
theTV
TVbefore
beforecleaning
cleaningit.it.Do
Donot
notuse
usesolvent
solventor
orliquid
to
cleantothe
TV. the
Once
TVthe
with
and
dry cloth.
liquid
clean
TV.Clean
Only the
clean
TVsoft
with
a soft,
dry
cloth.
6
6
Safety
Precautions (Cont.)
Safety Precautions (Cont.)
Do not use spare parts other than those suggested by the
Using inadequate
spare
parts
Inmanufacturer.
cause of troubleshooting,
do not use
spare
partscan lead to
other
than
those
suggested
by
the
manufacturer.
Using
electric shocks, short circuits, fire or other incidents.
inadequate spare parts can lead to electric shocks, shortcircuits fire or other incidents.
Unplug the TV during lightning storms or when unused for
long periods
of time.
Unplug
the TV during
lightening storms or when unused for
long periods of time.
7
Important Safety Instructions
Read this manual thoroughly before first use and keep it in a safe place for future reference,
along with the warranty card, purchase receipt and carton. The safety precautions enclosed
herein reduce the risk of fire, electric shock and injury when correctly adhered to.
Usage conditions and restrictions
To prevent any injuries, the following safety precautions should be observed in the
installation, use, servicing and maintenance of equipment. Before operating this equipment,
please read this manual completely, and keep it nearby for future reference.
• Take notice of all the warnings.
• Do not use this TV near water.
• Clean only with a dry cloth.
• Do not block any of the ventilation openings.
• Install in accordance with the manufacturer’s instructions.
• Do not install near any heat sources such as radiators, heat registers, stoves, or other TV’s
(including amplifiers) that produce heat.
• Do not alter the grounding type plug provided with the TV. A grounding type plug has two
blades and a third grounding prong. The third prong is provided for your safety. When the
provided plug does not fit into your outlet, consult an electrician for replacement of the
obsolete outlet.
• Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the TV.
• Only use the attachments/accessories specified by the manufacturer.
• U
se only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold
with the TV.
• Unplug this TV during lightning storms or when unused for long periods of time.
• The appliance is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been
given supervision or instruction concerning use of the appliance by a person responsible
for their safety.
• Young children should be supervised to ensure they do not play with the appliance.
• Refer all servicing to qualified service personnel. Servicing is required when the TV has been
damaged in any way, such as power supply cord or plug is damaged, liquid has been spilt
or objects have fallen into the TV, the TV has been exposed to rain or moisture, does not
operate normally, or has been dropped.
• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or
similarly qualified persons in order to avoid a hazard.
NOTE: The TV must not be exposed to dripping or splashing and no objects filled with
liquids, such as vases, should be placed on the TV.
8
Important Safety Instructions
Electrical safety, power cord and plug
• Before installing this TV set, make sure your outlet voltage corresponds to the voltage
stated on the appliance rating label.
• To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.
• Do not overload the power cord or power outlet.
• Do not let the cord hang over the edge of a table or counter, or touch any hot surface.
• Do not allow anything to rest on or roll over the power cord and signal cable.
• Protect the power cord and signal cable from being trampled.
• Do not expose the power cord and signal cable to moisture.
Position
• If a television is not positioned in a sufficiently stable location, it can be potentially
hazardous due to falling. Many injuries, particularly to children, can be avoided by taking
simple precautions such as:
• Securely attaching the TV to the wall mount fastened on the wall.
• Only using furniture that can safely support the television.
• Ensuring the television is not overhanging the edge of the supporting furniture.
• Educating children about the dangers of climbing on furniture to reach the TV controls.
• Not standing the TV on cloth or other materials placed between the television and
supporting furniture.
• Not placing the television on tall furniture (for example, cupboards or bookcases)
without anchoring both the furniture and the television to a suitable support.
• When deciding on where to put the TV set, make sure the place is:
• Well ventilated.
• Away from damp and cold.
• Protected from overheating and away from direct sunlight.
• Away from moisture drips or splashes.
• Protected from excessive dust.
• Do not install this equipment in a confined space such as a bookcase or similar unit.
• Do not put any objects filled with liquids, such as vases, on top of the TV set.
• Do not place any naked flame sources, such as lighted candles, on top of the TV set.
Cleaning and maintenance
• Dust the TV set by wiping the screen and cabinet with a soft, clean cloth.
9
Important Safety Instructions
• Do not apply excessive force to the screen when cleaning.
• Do not clean the screen with water or chemical cleaners as this may damage the LED
screen surface.
• Do not dismantle this product by yourself, as this may cause damage. There are no userserviceable parts contained in the TV set.
• If your TV set has been damaged, contact the after sales support line for advice or take
it to a local service centre for inspection or repair. No liability can be accepted for any
damage caused by non-compliance with these instructions or any other improper use or
mishandling of appliance.
CAUTION: TO PREVENT THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL
This symbol indicates that dangerous voltage constituting a risk of
electric shock is present within this unit.
This symbol indicates that there are important operating and
maintenance instructions in the documentation accompanying this unit.
WARNING:
TO PREVENT DAMAGE WHICH MAY RESULT IN FIRE OR AN ELECTRIC SHOCK HAZARD, DO
NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
CAUTIONS: • T hese servicing instructions are for use by qualified service personnel only. To
reduce the risk of electric shock, do not perform any servicing other than that
contained in the operating instructions unless you are qualified to do so.
• Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
10
10
In the Carton
In the Carton
Screws and Metal Plate
Mini YPbPr Cable
11
11
Connections
and
Functions
Connections
and
Functions
11
Front Front
and Back
Connection
of LED
TV TV
Connections
and
and Back
Connection
ofFunctions
LED
1.
2.
3.
4.
5.
6.
7.
Press
button
to turn
TV on
1. “POWER”
Press “POWER”
button
to turn
TVor
on or
Front and Back Connection of LED TV
off.
Press
“SOURCE”
to select
the
input
1.
Press “POWER”
button
to turn
on or
2. Press
“SOURCE”
to select
theTV
input
source.source.
Press “MENU”
“SOURCE”
select
the
input
Press
to bring
up
the
main
3.2. “MENU”
Press
totobring
up
the
main
source.
menu
on
the
screen.
menu on the screen.
Press “MENU” to bring up the main
4.3. “CH+”
Press
“CH+”
or “CH-”
to scan
through
Press
or “CH-”
to scan
through
menu on the screen.
channels.
channels.
4. Press “CH+” or “CH-” to scan through
5. “VOL+”
Press
“VOL+”
or “VOL-”
to increase
Press
or “VOL-”
to increase
or or
channels.
theor
volume.
5. decrease
Press
“VOL+”
“VOL-” to increase or
decrease
the
volume.
6. REMOTE
SENSOR:
Infrared sensor for
decrease
the
volume.
REMOTE SENSOR: Infrared
sensor for
the
remote
control.
6.
REMOTE
SENSOR:
Infrared
sensor for
the remote control.
7. POWER
INDICATOR:
Show
red in
the remote control.
POWER
INDICATOR:
Show
red
in
7. standby
POWER INDICATOR:
Show
in your
mode, show
bluered
when
standby
mode,
show
blue
when
your
standby
mode,
show
blue
when
your
TV is switched on.
TV is switched
on.
TV is switched on.
6
7
5
5
POWER
Back
View and Control Connections
Back View and Control Connections
6
7
4
4
3
3
2
2
1
POWER
1
Back View and Control Connections
1.
2.
3.
4.
1. ANT: Connection for the antenna plug.
7. Headphone: Connect the earphone.
2.
HDMI:
Connect
to
the
HDMI
output
socket
of
a
8. 7.YPbPr:
Connect toConnect
the (Component)
output socket
1. ANT: Connection for the antenna plug.
Headphone:
the earphone.
DVD
player.
of
a
DVD
Player.
2. HDMI: Connect to the HDMI output socket of a
8. YPbPr: Connect to the (Component) output socket
3. DVD
Video:
Connect to a DVD player’s VIDEO output
9. PC Audio:
Connect
to a PC’s Audio output socket.
player.
of a DVD
Player.
socket.
10. VGA:
Connect to
a PC’s PC-RGB
output socket.
ANT:
Connection
for
the
antenna
plug.
7.
Headphone:
Connect
the
earphone.
3. Video: Connect to a DVD player’s VIDEO output
9. PC Audio: Connect to
a PC’s
audio output socket.
4.
R/L:
Connect
the
R/L
AUDIO
output
socket
of
DVD.
11.
AC
100
240V:
Main
power
input.
HDMI: Connect
to the HDMI output socket of a
8. 10.YPbPr:
Connect
to
the
(Component)
output
socket
socket.
VGA:
Connect
to
a
PC’s
PC-RGB
output
socket.
5.
Coax:
Connect
to
an
external
digital
audio
device.
DVD
of a DVD Player.
4.6.player.
R/L:
R/L AUDIO
USB:Connect
Connectthe
to portable
USBoutput
storagesocket
device.of DVD. 11. AC 100 - 240V: Main power input.
Video:
to a DVD
player’s
VIDEO
9. PC Audio: Connect to a PC’s Audio output socket.
5. Connect
COAX: Connect
to an
external
digitaloutput
audio device.
socket.
6. USB: Connect to portable USB storage device. 10. VGA: Connect to a PC’s PC-RGB output socket.
R/L: Connect the R/L AUDIO output socket of DVD. 11. AC 100 - 240V: Main power input.
12
12
12
12
Basic
BasicInstallation
Installation
Power
Cord
Connection
Power
Cord
Connection
Power
Cord
Connection
Connect
thethe
power
cord
as shown.
shown.
- Connect
power
cord
as shown.
-- Connect
the
power
cord
as
Press
thethe
POWER
switch
of your
your
LEDLED
TV TV
to switch
switch
thethe
unitunit
on.on.
TheThe
power
indicator
on the
the
- Press
POWER
switch
of your
to switch
power
indicator
on the
-- Press
the
POWER
switch
of
LED
TV
to
the
unit
on.
The
power
indicator
on
front
panel
lights
up
in
blue.
front
panel
lights
in blue.
front
panel
lights
upup
in blue.
Antennas
Connection
Antennas
Connection
Antennas
Connection
To ensure good picture and sound, a TV antenna system needs to be installed. The antenna
ensure
good
picture
sound,
a TV
antenna
system
needs
to installed.
be installed.
antenna
To To
ensure
good
picture
andand
sound,
a TV
antenna
system
needs
to be
TheThe
antenna
system as shown can be sourced from TV equipment shops, which will provide service for
system
as
shown
can
be
sourced
from
TV
equipment
shops,
which
will
provide
service
system as shown can be sourced from TV equipment shops, which will provide service for for
correct installation and connections. After installation, insert the 75-OHM antenna plug into
correct
installation
connections.
After
installation,
insert
75-OHM
antenna
correct
installation
andand
connections.
After
installation,
insert
thethe
75-OHM
antenna
plugplug
intointo
the antenna socket as shown.
antenna
socket
as shown.
thethe
antenna
socket
as shown.
Basic Installation (Cont.)
Basic
Installation
(Cont.)
Basic
Installation
(Cont.)
13
13 13
13
13
AV Connection
AV Connection
Connect
the VIDEO and AUDIO output sockets of the DVD or VCR to the AV IN sockets on the
AV Connection
theRCA
VIDEO
and(Yellow
AUDIO[video],White
output sockets
of Red
the DVD
or VCR
to the
AV INSelect
sockets
TVConnect
using the
cable
and
[left and
right
audio]).
theonAVthe
Connect the VIDEO and AUDIO output sockets of the DVD or VCR to the AV IN sockets on the
TV
using
the
RCA
cable
(Yellow
[video],White
and
Red
[left
and
right
audio]).
Select
the
AV
input source
theRCA
SOURCE
the remote
control.
TV using
using the
cable button
(Yellow on
[video],White
and
Red [left and right audio]). Select the AV
input source using the SOURCE button on the remote control.
input source using the SOURCE button on the remote control.
HDMMI2I3 HD M I3
HD M I1 HD
HD MM I2
I1 HD
C OAX
HDMMI2I3 HD M I3
HD M I1 HD
HD MM I2
I1 HD
C OAX
YPbPr Connection
YPbPr
YPbPrConnection
Connection
Connect
the
YPbProfoutput
of the
DVDto
or the
VCRYPbPr
to the input
YPbPr on
input
the
TV.picture
The picture
quality
Connect
the
YPbPr
output
the DVD
or VCR
theon
TV.
The
quality
Connect isthe
YPbPr output
of the
DVD or VCRato
the YPbPr
input
on theinput.
TV. The
picture
quality
improved
compared
to
connecting
regular
VCR
to
the
video
Connect
the
Audio
is is
improved
compared
totoconnecting
aaregular
VCR
input.
Connect
the Audio
Audio
improved
compared
connecting
regular
VCRto
tothe
thevideo
video
input.
Connect
the
output
ofor
the
DVD
or
VCR
to the
Audiosockets
input
sockets
on
the
set using
the cable.
RCA
cable.
Match
output
of
the
DVD
VCR
to
the
Audio
input
on
the
set
using
the
RCA
Match
output ofthe
thesockets
DVD orcolours:
VCR toYthe
Audio
input
sockets
on
the
set
using
the
RCA
cable.
Match
is
green,
Pb Pr
is blue,
Pr is red. left
Audio
left is white
and Audio
in red.
the
sockets
colours:
Y isisgreen,
Pb
isisred.
is white
and
Audio
rightright
in red.
red.
the
sockets
colours:
green,
Pbisusing
isblue,
blue,
red.Audio
Audio
white
andcontrol.
Audio right
in
Select
YPbPrYinput
source
thePrSOURCE
buttonleft
onisthe
remote
Select
YPbPr
Select
YPbPrinput
inputsource
sourceusing
usingthe
theSOURCE
SOURCEbutton
buttonon
onthe
theremote
remote control.
control.
HD M I1 HD M I2 HD M I3
HD M I1 HD M I2 HD M I3
HD M I1 HD M I2 HD M I3
HD M I1 HD M I2 HD M I3
Mini YPbPr Cable
Mini YPbPr Cable
�
�
�
�
�
�
�
�
��
�
�
�
�
�
�
�
��
��
���
�
�
�
�
���
�
�
�
�
�
�
�
��
�
��
14
14
14
�
�
�
�
�
�
�
�
�
�
��
�
�
�
�
�
�
�
��
��
���
�
�
�
�
��
�
�
�
�
�
�
��
�
��
Basic
Installation
(Cont.)
Basic
Installation
(Cont.)
Basic
Installation
(Cont.)
�
��
�
�
�
�
�
�
�
���
�
�
��
����
�
�
��
�
�
�
��
�
�
��
�
�
��
�
�
�
�
��
�
�
��
�
�
�
�
�
�
�
��
�
�
�
��
�
�
�
�
�
�
�
�
�
��
�
�
�
��
���
�
��
�
���
��
��
�
��
��
�
�
�
��
�
���
��
��
�
�
�
�
�
�
�
�
��
�
�
�
�
��
�
�
�
�
�
�
�
�
�
�
�
�
��
�
�
�
��
�
�
�
�
�
�
�
�
�
��
��
�
��
�
�
��
�
�
�
�
��
�
�
�
�
�
�
�
��
�
�
�
��
����
�
�
��
�
�
�
�
�
�
�
��
�
��
��
�
���
��
�
�
�
�
��
�
�
�
�
�
�
�
�
�
�
�
�
�
�
��
�
�
�
�
���
�
��
�
�
�
�
�
�
��
�
��
�
�
�
�
�
�
�
�
�
��
�
�
�
�
�����
��
��
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
���
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
��
�
�
�
�
�
�
�
�
��
�
�
�
�
�
�
�
�
�
�
�
�
��
�
�
�
�
�
�
�
�
�
�
�
�
�
�
��
�
�
�
�
�
�
��
��
�
��
�
�
�
�
�
�
�
��
�
�
��
����
��
�
�
�
�
�
�
��
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
��
�
��
�
�
�
�
�
�
�
��
�
�
�
�
VGA
(PC)
Connection
�
�
�
�
�
�
��
�
�
�
��
�
���
�
���
�
���
VGA
(PC)
Connection
VGA
(PC)
Connection
�
�
�
�
�
�
�
�
�
�
��
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
��
�
�
�
�
���
�
��
�
�
�
�
�
�
�
�
�
��
�
�
�
�
�
�
�
�
�
��
�
�
�
�����
�����
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
���
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
��
�
Connect
the
RGB of
output
of
the
PC
to
the
VGA
socket
on
the
set.
Connect
the
AUDIO
Connect
theRGB
RGB
output
ofthe
thePC
PC
to
the
VGA
socket
on
the
set.
Connect
the
AUDIO
outputoutput
Connect
the
output
to
the
VGA
socket
on
the
set.
Connect
the
AUDIO
output
��
�
�
�
�
�
�
�
��
�
���
�
���
�
���
���
�
���
�
�
�
��
�
�
�
��
�
�
of
the
PC
to
the
PC
AUDIO
socket
on
set.the
Select
the
PCsource
input using
source
using
the SOURCE
ofthe
the
PC
to�
the
PCAUDIO
AUDIO
socketon
onthe
theset.
set.the
Select
thePC
PCinput
input
source
usingthe
the
SOURCE
of�
PC
to
the
PC
socket
Select
SOURCE
button
on
the remote
control.
buttonon
onthe
theremote
remote
control.
button
control.
�
��
��
�
�
�
���
�
�
��
����
��
��
�
�
�
��
�
�
��
�
�
��
�
��
�
��
��
��
��
�
��
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
��
�
�
�
�
��
�
�
�
�
�
�
�
�
��
�
�
�
��
��
��
��
HDMI
Connection
HDMI
Connection
�
�
�
�
��
�
��
�
�
�
�
��
�
�
��
�
�
��
��
�
�
�
�
�
��
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
��
�
�
�
�
�
�
��
�
HDMI
Connection
�
���
��
�
�
�
�
�
�
�
�
��
����
�
�
�
�
�
�
�
�
��
HDMI�
connection
allows
the
user
to
transfer
both
audio
and
video
signalssignals
through
��
���
�
�
��
��
�
�
�
��
�
�
��
�
��
�
�
�
�
�
�to
�
�
��
�
���
�
�
�
�����
�
�
HDMI
connection
allows
the
user
transfer
both
audio
and control
video control
through
��
�
�
�
�
�
�
��
�
�
�
�
�
��
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
��
�
�
�
��
�
�
�
�
�
���
�
�
HDMI
connection
allows
the
user
to
transfer
both
audio
and
video
control
signals
through
�
�
��
�
�
��
�
��
�
�
�
�
��
��
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
��
�
�
�
�
�
�
�
�
��
�
�
�
��
��
��
��
����
�
���
���
�
�
��
��
�
�
�
�
�
�
��
��
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
��
�
�
�
�
�
�
��
�
one
cable
only.
These
signals
are
transferred
in
digital.
one
cable
only.
These
signals
are
transferred
in
digital.
one
cable
only.
These
signals
are
transferred
in
digital.
�
��
�
�
��
�
�
�
�
�
��
�
�
�
�
�
��
�
�
�
�
�
�
�
��
�
�
��
�
�
�
�
����
�
���
��
����
�
�
��
��
�
�
�
�
��
�
�
�
�
�
��
�
�
��
�
�
�
�
�
�
�
�
���
�
�
�
�
�
���
�
�
HD MM I1
I2 HD
HD MMI2
I3 HD M I3
HD M I1 HD
�
�
�
�
�
�
�
�
�
�
��
�
�
�
�
�
�
�
�
�
�
��
Basic
Installation
(Cont.)
�
�
�
�
�
�
�
�
�
�
��
�
�
�
�
�
�
�
�
�
�
��
Basic
Installation
(Cont.)
Basic
Installation
(Cont.)
�
�
�
�
�
�
�
�
�
�
��
�
�
�
�
��
�
�
�
�
�
��
�
�
�
�
�
�
�
�
�
�
��
�
�
�
�
�
�
�
�
�
��
�����
�����
�
�
��
15
15
15
Coax
Connection
���
�
�
�����
�
�
��
Coax
Connection
�
�
��
�
�
��
����
�
�
�
�
��
�
�of
��
���
�
���
��
�����
�
�
�
�
��
��
�
�
�
�
��
��
��amplifier.
���
���
�
�
��
�
�
�
��
�
Coax
Connection
Connect
the
Coaxial
output
the
TV
to �
the
Coaxial
(SPDIF)
input
on
the
Your
�
�
�
�
�
�
�
�
�
�
�
�
��
�
�
��
�
�
�
�
�
�
�
�
�
�
�
�
��
�
�
�
�
�
�
�
�
�
��
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
��
�
�
�
��
�
�
�
��
�
Connect
the
Coaxial
output
of
the
TV
to��
the
(SPDIF)
input
on
the
amplifier.
Your
�
�
�
���
�
�
�
��
�
�
�
��
�
��
�
��
�
��
�
�
�
�of
�
�
�
�
��
��
��
�
�
�Coaxial
�
��
�
��
�
��
�input
��
�
�
�to
�
�
�
��
�
��
��
�
�
�
��
�
�
�
�
���
��
Connect
the
Coaxial
output
the
TV
to
the
Coaxial
(SPDIF)
on
the
amplifier.
Your
amplifier
must
have
the
corresponding
decoding
functions
decode
the
signal
coming
����
�
�
�
�have
�
�
�
�
�
�
�
�
��
�
���
���
�
�
���
��
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
���
�
�
�
�
�
�
��
�
�
�
��
�
�
��
�
��
��
�
��
��
�
�
�
�
�
�
��
�
�
�
��
�
��
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
��
�
�
��
��
�
��
amplifier
must
the
corresponding
decoding
functions
to
decode
the
signal
coming
�
�
��
�
�
�
�
�
�
�
�
�
�
�
�
��
�
�
�
�
�
�
�
�
�
��
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
��
�
�
�
��
�
�
�
��
�
�
�
�
�
�
��
amplifier
must
have
the
corresponding
decoding
functions
to
decode
the
signal
coming
from
the
TV.
�
��
��
�
��
�
��
�
�
�
�
�
�
�
�
�
�
��
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
��
�
�
�
�
�
��
�
�
�
�
�
�
�
�
�
��
from
the
TV.
�
��
��
�
��
����
���
�
����
���
��
�����
�� �
��
���
���
���
�
�
������
�
����
���
��
��
�
�
���
��
from
the
TV.
�
�
��
�
�
��
HD M I1
HD M I1
��
��
�����
�
�
��
USB
Connection
�
�
�
�
�����
�
�
��
USB
Connection
USB
Connection
����
�
�
�
��
��
���
�
�
�
��
�
��
��
���
��
�
�
��
�
���
��
��
�
�
��
A�
portable
USB
device
can
be
connected
to�
the
USB
socket.
�
�
�
�
�
�
�
�
�
��
��
��
�
�
�
�
��
�
�
�
�
�
�
�
�
�
�
�
�
�
�
���
�
�
�
�
�
�
�
�
��
�
�
��
�
�
��
A portable
USB
device
can
be�
connected
to�
the
USB
socket.
A portable
USB
device
can
be
connected
to
the
USB
socket.
��� �
�����
�
�
��
����
�
�
���
�����
�
�
�
��
�
����
���
��
�
�
� ��
����
��
��
�
�
��
����
�
�
���
��
���
�
�
�
��
�
����
���
��
�
�
� ��
����
��
��
�
�
��
16
16
16
Remote
Control
Remote
RemoteControl
Control
The buttons on the remote control and buttons marked similar on the TV unit
The buttons
on the
remote control and buttons marked similar on the TV unit
performs
similar
function.
The buttons
on function.
the remote control and similarly marked ones on the main unit
performs
similar
perform similar functions.
1
2
TV/RADIO
AUTO
MUTE
3
4
18
19
5
-/-NICAM
ASPECT
SLEEP LANGUAGE
6
AUDIO
17
VOL
CH.
DISPLAY
SOURCE
7
8
OK
OK
16
15
14
LCD
MENU
EXIT
9
10
11
12
13
TITLE
P.MODE
INPUT PMODE
S.MODE SMODE
FREEZE DISPLAY
SLEEP
HOLD
EPG
FAV
FAV-
D.MENU
MEDIA
SIZE
SUBTITLE
EPG
ZOOM
HOLD
LANG SUBTITLE
INDEX
TEXT/MIX
GOTO
ANGLE REPEAT
DVD SETUP
GVAFLED32
A-B
*
17
Remote Control (Cont.)
TV Control in DTV Mode
1.
POWER
: Press “POWER” button to turn standby mode on or off.
2.
TV/RADIO
3.
MUTE
4.
NUMBER BUTTONS: Press 0-9 to select a TV channel directly when you are watching
: Select TV or Radio modes.
: Press to mute the sound. Press again to unmute the TV.
TV. The channel changes after 2 seconds.
5.
CHANNEL RETURN
6.
AUDIO / Language: Select audio language. / Select language.
7.
CH+/-: Press to change to the next channel.
8.
SOURCE: Press to cycle through the input source.
9.
NAV
/
/
/
: Return to the previous channel viewed.
: Allows you to navigate the on-screen menus and adjust the system
settings to your preference.
10. OK: Confirm Selection / Enter button.
11. EXIT: Exit the main TV menu.
12. DISPLAY: Press to display the source and channel’s information.
13. HOLD / FREEZE: Hold teletext / freeze picture or current page.
14. SMODE: Press to cycle through the different sound settings.
15. PMODE: Press it to cycle through the available video picture modes.
16. MENU: Brings up the main menu to the screen.
17. VOL+/-: Press to increase/decrease the sound level.
18. SLEEP: Select amount of time. Let your TV turn off automatically.
19. MULTI-DIGITS -/-- : Press this button to enter a program number for multiple program
channel such as 2-1,etc.
* DVD functions may not apply if your TV does not come with built-in DVD player.
D.MENU / EPG: DVD disc menu / Launches the EPG ( Electronic Program Guide) in DTV
mode.
FAV: Press to display your favourite program in DTV mode.
ZOOM / SIZE: Press this button to select the different screen size on your TV.
SUBTITLE: To display subtitle.
MEDIA: Press to select MEDIA mode.
18
16
16
Remote
Control
(Cont.)
Remote
Control
Remote Control
The buttons on the remote control and buttons marked similar on the TV unit
The buttons
on the
remote control and buttons marked similar on the TV unit
performs
similar
function.
The buttons
on function.
the remote control and similarly marked ones on the main unit
performs
similar
perform similar functions.
1
2
TV/RADIO
AUTO
MUTE
3
4
18
19
5
-/-NICAM
ASPECT
SLEEP LANGUAGE
6
AUDIO
17
VOL
CH.
DISPLAY
SOURCE
7
8
OK
OK
16
15
14
LCD
MENU
EXIT
9
10
11
12
13
TITLE
P.MODE
INPUT PMODE
S.MODE SMODE
FREEZE DISPLAY
SLEEP
HOLD
EPG
FAV
FAV-
D.MENU
MEDIA
SIZE
SUBTITLE
EPG
ZOOM
HOLD
LANG SUBTITLE
INDEX
TEXT/MIX
GOTO
ANGLE REPEAT
DVD SETUP
GVAFLED32
A-B
*
19
Remote Control (Cont.)
: PLAY/PAUSE in TIMESHIFT mode.
: Stop in TIMESHIFT mode or exit the REC mode.
/
: Fast reverse and forward key in TIMESHIFT mode.
/
: Jump to previous and next track or chapter in TIMESHIFT mode.
INDEX: Teletext INDEX display button.
TEXT / MIX: Press to switch between TV and Teletext / Mix mode.
DVD SETUP /
: Press to start recording in TIMESHIFT mode.
TV Control in DVD / Media Mode
ANGLE: Press the GREEN
button to display the current playback angle; press again to
toggle between different playback angle codes in sequence.
NOTE: Selectable playback angle is only available if DVD has this feature.
ZOOM: Press to zoom in on picture.
AUDIO: Select audio language.
SUBTITLE: To display subtitle.
D.MENU: DVD disc menu.
TITLE: Press to display the title.
: PLAY/PAUSE in DVD / Media mode.
: Stop in DVD / Media mode or exit the REC mode.
/
: Fast reverse and forward key in DVD / Media mode.
/
: Jump to previous and next track or chapter in DVD / Media mode.
GOTO: Press the RED
button to activate the on-screen scroll down menu for editing.
REPEAT: Press the YELLOW
button to play back a portion automatically (choose between
OFF / CHAPTER / TRACK / REP ALL).
A-B: Press the BLUE
button to start the repeat portion from A-B.
20
16
16
Remote
Control
(Cont.)
Remote
Control
Remote Control
The buttons on the remote control and buttons marked similar on the TV unit
The buttons
on the
remote control and buttons marked similar on the TV unit
performs
similar
function.
The buttons
on function.
the remote control and similarly marked ones on the main unit
performs
similar
perform similar functions.
1
2
TV/RADIO
AUTO
MUTE
3
4
18
19
5
-/-NICAM
ASPECT
SLEEP LANGUAGE
6
AUDIO
17
VOL
CH.
DISPLAY
SOURCE
7
8
OK
OK
16
15
14
LCD
MENU
EXIT
9
10
11
12
13
TITLE
P.MODE
INPUT PMODE
S.MODE SMODE
FREEZE DISPLAY
SLEEP
HOLD
EPG
FAV
FAV-
D.MENU
MEDIA
SIZE
SUBTITLE
EPG
ZOOM
HOLD
LANG SUBTITLE
INDEX
TEXT/MIX
GOTO
ANGLE REPEAT
DVD SETUP
GVAFLED32
A-B
*
21
Remote Control (Cont.)
TV Control for Teletext
TEXT/MIX: Press to switch between TV and Teletext / Mix mode.
HOLD / FREEZE: Hold teletext.
SUBTITLE: To display subtitle.
INDEX: Teletext INDEX display button.
ZOOM / SIZE: Press this button to select the teletext size.
COLOUR BUTTONS
: The RED / GREEN / BLUE / YELLOW buttons are used
for quick access to colour-code pages transmitted by FAST TEXT broadcast.
Example: RED button selects city information, GREEN button selects weather information,
BLUE button selects travel information and YELLOW button selects TV programming.
Teletext Function
Teletext or Austext is no longer available, nor is there any plan for a replacement teletext
service in Australia. For more information, please visit the websites of the Australian channel
providers.
However, one teletext option, “closed captions”, is still working on most Australian television
channels. This service allows you to activate subtitles while watching normal television
programs that provide it.
Accessing Closed Captions
To access “closed captions” while watching a program, press the teletext button (TEXT/MIX)
on the remote control, then enter the numbers 801 on the remote control to activate the
subtitles. To exit the subtitles, press the TEXT/MIX button again.
20
22
22
Remote
RemoteControl
ControlSetup
Remote
Control
Setup
1. Open the cover.
1. Open
Openthe
thecover
cover.at the back of the remote control unit completely.
2. 2.1.Your
remote
requires 2 2X
x AAA
inserting
the batteries,
batteries,make
makesure
surecorrect
correct
Your
remote
AAABatteries.
Batteries.When
When
inserting
2.polarity
Insert two
1.5Vrequires
AAA batteries,
ensuring
the
polarities
(+the
/ -) ofasthe
batteries
arethe
marks”+”and
“-”
on
the
batteries
match
the
diagram
shown
within
battery
polarity marks”+”and “-” on the batteries match the diagram as shown within the battery
correctly
aligned
and
the
batteries
are
properly
pushed
compartment.
compartment.
into
place
so they
cancover.
power the remote control unit.
3. 3. Replace
the
Replace
thebattery
batterycover.
3. Replace the battery cover.
Precautions
when
using
batteries
Precautions
when
using
batteries:
Precautions
using
• Do not usewhen
old and
newbatteries:
batteries together.
o nnot
ot uuse
se dold
iffeand
rent new
typesbatteries
of battertogether.
y (for example, Manganese and Alkaline batteries)
• • DDo
•
Do
not
use
old
and
new
batteries
together.
• together.
Do not use different types of battery
(for example, Manganses and Alkaline batteries
• together).
Do not use different types of battery (for example, Manganses and Alkaline batteries
• Note that there are chargeable and non-chargeable batteries. Do not attempt to
together).
• charge
Note
that
there are chargeable
and non-chargeable batteries. Do not attempt to change
non-chargeable
batteries.
•
Note that there are chargeable and non-chargeable batteries. Do not attempt to change
non-chargeable
batteries.
• Rem
ove the batteribatteries.
es from the remote control unit if you do not intend to use the unit
non-chargeable
• for
Remove
batteries
from
the remote control unit if you do not intend to use the unit for a
a long time.
•
Remove
batteries from the remote control unit if you do not intend to use the unit for a
long
•W
hlong
entime.
dtime.
isposing used batteries, follow any guidelines for recycling and disposal of
• batteries
When disposing
used
batteries,
any guidelines for recycling and disposal of
that apply
in your
local follow
area.
•
When disposing
used
batteries,
follow any guidelines for recycling and disposal of
batteries
that apply in your local area.
batteries that apply in your local area.
Using the remote control
Using
Usingthe
theRemote
RemoteControl
Control
The
remote
control should
be operated
withinfeet
20 feet (5m)
and to
30°the
to left
the or
leftthe
or right
the of
The
remote
control
The
remote
controlshould
shouldbe
beoperated
operatedwhin
whin20
20 feet(5m)
(5m) and
and 30°
30° to the
left or
the right
of
right
of the at
IR receiver
at the front
of the TV.
thethe
IR IR
receiver
receiver
atthe
thefront
frontofofthe
theTV.
TV.
23
23
23
Basic
Basic Operations
Operations
Basic Operation
Make sure all necessary connections are correctly made before connecting the unit
Make sure all necessary connections are correctly made before connecting the unit
to the wall socket and turning on the power. The power indicator turns red and the
to thesure
wallallsocket
andconnections
turning onare
thecorrectly
power. connected
The powerbefore
indicator
turns
Make
necessary
plug-in
the red
unitand
to the
unit is in stand-by
mode.
unitwall
is insocket
stand-by
mode. on the power. The power indicator turns red and the unit is in
the
and turning
standby mode.
Power on/off
Power On/
on/off
Power
Off
Press
on the remote control (or on the side of the TV) to turn on the power to the
Press
on the remote control (or on the side of the TV) to turn on the power to the
TV. The
indicator
red(or
(stand-by)
toofblue
(on).to turn on the power.
Press
thepower
button
on the turns
remotefrom
control
on the side
the TV)
TV. The power
indicator
turns
from
red (stand-by)
to blue
(on).
The power indicator should turn blue once powered on.
The unit will switch to stand-by mode and the power
The unit will switch to stand-by mode and the power
indicator
turns
red.
To
turn
the
TV
off,
press
the
button will switch the TV to standby mode, and power
indicator turns red.
indicator will turn red.
Volume adjustment
Volume
VolumeAdjustment
adjustment
PressVOL[VOL-]
to reduce
the volume,
press to
[VOL+]
to the
increase
the volume.
Press
to reduce
the volume,
press VOL+
increase
volume.
Press [VOL-] to reduce the volume, press [VOL+] to increase the volume.
or
or
Mute function
Mute function
Press [MUTE
Press [MUTE
Mute
againFunction
(or the [ / ] button) to restore the sound.
againthe
(orMUTE
the [ button
/ ] button)
to restore
thetosound.
Press
on the remote
control
switch off the sound temporarily, press it
again (or the
+
/
-
button) to restore sound.
TV channel selection
TVChannel
channelSelection
selection
TV
To select your TV channel, select analogue (ATV) or digital (DTV) as input source first, then
then choose
your channel
one
of the following
ways:
choose
your channel
one of the
following
ways:
then choose your channel one of the following ways:
Press [CH ] or [CH ] on the main unit.
Press
[CHCH ]v or
] on
main
• Press
or [CH
CH^ on
thethe
main
unit.unit.
Press
[0–9]
(combined
[-/--]
if
necessary)
to input
thethe
channel
number
directly.
• Press
0-9(combined
buttons (combined
-/-- if necessary)
to input
channel
numberdirectly.
directly.
Press
[0–9]
[-/--] if necessary)
to input
the channel
number
• Press
LASTCH]
CH to
to go back
channel
youyou
watched
last time.
Press
[LAST
backtotothe
theprevious
previous
channel
watched
last time.
Press [LAST CH] to go back to the previous channel you watched last time.
or
or
24
24
Basic
(Cont.)
Basic Operations
Operation (Cont.)
Operations
(Cont.)
First Time Installation
First
Firsttime
timeinstallation
installation
1. Connect
Connect the
toto
thethe
RF RF
75Ω
socket.
1.
the
antenna
socket.
1.
Connect
theantenna
antenna
to
the
RF75Ω
75Ω
socket.
2.
Turn
on
the
TV.
The
First
Time
Installation
menu
will be
displayed
on the on
screen
as
2.
on
the
TV.
The
First
Time
Installation
menu
will
be
displayed
the
screen,
2. Turn
Turn
on
the
TV.
The
First
Time
Installation
menu
will
be
displayed
on
the
screen,
below:
as
asbelow.
below.
Portugues
Portugues
3.
the
control
to
the
tuning
type:
3. Press
Press /// on
on
theremote
remote
control
toselect
select
thedesired
desired
tuning
type:
3.
Press
button
on
the remote
control
to select
the
desired
tuning
type:
DTV
DTV--digital
digitalchannels
channels(SD/HD)
(SD/HD)
ATV
channels
only
DTV---analogue
Digital Channels
(SD/HD)
ATV
analogue
channels
only
ATV++
- Analogue
Channels
ATV
DTV
available
ATV
DTV--all
allchannels
channelsonly
availablein
inyour
yourarea
area
ATV
+
DTV
All
channels
available
in
your
area.
4.
4. Use
Usethe
the // // // navigation
navigationkeys
keysto
toselect
selectthe
thedesired
desiredlanguage,
language,then
thenpress
press
[OK] to
the Channel Tuning
screen. The
default
language
of
is
toenter
enter
Tuning
defaultlanguage,
languagethe
ofthis
thisTV
TV
4. [OK]
Use the
/ /the/ Channel
navigation
keys screen.
to selectThe
the desired
press
OKis
English.
English.
button to enter the Channel Tuning screen. The default language of this TV is English.
5.
The TV
channels
automatically
from from
the
lowest
frequency.
When
5.
will
start
searching
channels
automatically
the
frequency.
5. The
The
TVwill
willstart
startsearching
searching
channels
automatically
from
thelowest
lowest
frequency.
6.
it finds a channel, it will store it in the first location and move to the next. When auto
tuning
is completed,
the TV
display the
channels
logical the
channel
number
next.
When
auto
isiswill
completed,
the
TV
in
logical
next.
When
autotuning
tuning
completed,
the
TVwill
willindisplay
display
thechannels
channels
in(LCN)
logical
order.
channel
number
(LCN)
order.
channel number (LCN) order.
Press MENU or EXIT to cancel the auto tuning.
6.
6. Press
Press[MENU]
[MENU]or
or[EXIT]
[EXIT]to
tocancel
cancelthe
theauto
autotuning.
tuning.
TV Information
TTVVinformation
Pressinformation
DISPLAY button to display the channel information.
Press
Press[DISPLAY]
[DISPLAY]to
todisplay
displaythe
thechannel
channelinformation.
information.
Current
Currentchannel
channelname
name
Channel
Channelnumber
number
25
Basic Operation (Cont.)
Input Source
Make sure you have the external input device (such as a home theatre) properly connected.
Turn on the external device and press SOURCE on the remote control to select it. The input
source menu will appear.
1. Use the / button to move the highlighted bar to the desired source item.
2. Press OK button to confirm selection, information of the selected source name will
appear on the TV screen for a few seconds.
Information Display
Press DISPLAY button on the remote control, the related information about the current
source will appear on the screen automatically.
Picture Mode
Press P.MODE repeatedly on the remote control to select your desired picture mode from the
four available modes: Standard, Dynamic, Mild, Personal.
Sound Mode
Press S.MODE repeatedly on the remote control to select your desired sound mode from the
five available modes: Standard, Music, Movie, Sports, Personal.
Audio Language
For some programmers with audio language options, press LANGUAGE button on the remote
control will display the different audio language options for selection.
Sleep Timer
The sleep timer automatically switches off the power after a preset time has elapsed. There
are eight time periods available. Press SLEEP on the remote control repeatedly to select your
desired time period:
Off 10 min
Off.
20 min
30 min
60 min
90 min
120 min
180 min
240 min
Once you have finished setting the sleep timer, it will start automatically.
To check for how much longer the TV will remain powered on until it turns off by the sleep
timer, press the SLEEP button on the remote control and the remaining sleep timer will
appear on the screen for a few seconds.
26
30
26
30
EPG
Guide)
EPG(Electronic
(ElectronicProgram
Program Guide)
Guide)
EPG
(Electronic
Program
EPG (Electronic Program Guide)
18
the LED
EPG stands for Digital Electronic Program Guide. It is supplied by the programPowering
providers
30
EPGstands
stands
forDigital
DigitalElectronic
ElectronicProgram
ProgramGuide.
Guide.ItItisissupplied
suppliedby
bythe
theprogram
programproviders
providers and
EPG
for
Powering
the
EPG stands
forLED
DigitalTV
Electronic Program Guide. It is supplied by the program providers
18
offers information about the programs to be broadcast. You can access it in digital mode
To
turn
the
power
ON
or
OFF:
mode
by pressing
the EPG
button
onremote
the remote
control,
the18
menu
will on
appear
on theas
by pressing
the
EPG
button
on
the
control,
the menu
will
appear
theon
screen,
mode
by
pressing
the
EPG
button
on
the
remote
control,
the
menu
will
appear
the
Powering
the
LED
TV
mode
by
pressing
the
EPG
button
on
the
remote
control,
the
menu
will
appear
on
the
Toscreen,
turn theas
power
ON or OFF:
Make sure that the power cab
below:
screen,
asbelow:
below:
screen,
as below:
Powering
the
LED TV
Powering 1)the
LED TV
EPG (Electronic Program Guide)
1) Make sure that the power cable is properly plugged.
2) Press the “STANDBY” button o
EPG stands for Digital Electronic Program
Guide.
Itpower
is supplied
by
the program providers
To
turn
the
ON
or
OFF:
2) Press the “STANDBY” button on the remote control.
NOTE: Make sure that you are a
To turn the power ON or OFF:
To
turn the plugged.
power ON or OFF:
1)
Make
sure
that
the
power
cable
is
properly
NOTE:mode
Makeby
sure
that you
aiming
at on
thethe
sensor
from
the TV.the menu will appear on the
pressing
theare
EPG
button
remote
control,
1) Makescreen,
sure that
the power cable is properly2)plugged.
1) Make
surecontrol.
that the power cable is properly plu
Press the “STANDBY” button on the
remote
as below:
2) Press the “STANDBY” button on the remoteNOTE:
control.
2) Press
the
“STANDBY”
button
Make sure that you are aiming
at the
sensor
from the
TV. on the remote
First Time Installa
First Time Installation
NOTE: Make sure that you are aiming at the sensor from the TV.
Default
First Time Installation
NOTE: Make sure that you are aiming
at the sens
Default
First Time Installation
First Time Installation
Default
Default
Default
When you switch on the TV for
will be displayed on the screen
When you switch on the TV for the rst time, the First Time Installation menu
18
will be displayed on the screen.
buttons to selec
- Use the
NOTE:
mode
is
power
saving
mode, p
NOTE:
buttons to select the power-saving
mode
andon
thethe
“Default”
- Use
the
When you
switch
TV for the rst time, the First Time Installation
menu
NOTE:
no
EPG
information
is displayed
after
you
haveno
brought
up
the
EPG
menu,
use- use
the the
/ still
NOTE:
When
the
TV
is
first
turned
on
(in
DTV
mode),
EPG
information
is
displayed.
If
buttons
Use
no
EPG
information
is
displayed
after
you
have
brought
up
the
EPG
menu,
mode
is
power
saving
mode,
press
the
button
to
exit.
will
displayed
on the screen.
When you switch
onEPG
the information
TV for the rst is
time,
the be
First
Time
Installation
menu When
you
switch
on the TV
for the rst time, the
still
noand
displayed
after
you
have
up
the
EPG
menu,
use
/buttons
buttons
tonavigate
navigate
to
thehave
channel
you
wish
to
display
the the
information
from
button
to go to the next page
EPG
information
is displayed
after
you
brought
upbrought
the
EPG
menu,
use
the
/ screen.
and
toto
select
the
language
and
then
use
the
OK
- Use
the
and
to
the
channel
you
wish
to
display
information
from
will
beno
displayed
on thebuttons
screen.
will
be
displayed
on
the
buttons
to
select to
the
power-saving
and
Use
the
To buttons
turn the-press
power
orthe
OFF:
-mode
Use
the
and
it is highlighted,
OKON
on
remote
control
activate
and
/ to
toOK
navigate
to
the mode,
channel
you
wishit.to
display
the the “Default”buttons
button/ tothe
go
towhen
the/towhen
next
page.
button
navigate
the channel
you
wish
to
display
thepress
information
from,
and
when
and
it
is
highlighted,
press
on
the
remote
control
to
activate
it.
mode
is
power
saving
the
button
to
exit.
NOTE:
buttons
toactivated
selectto
the
power-saving
mode
and
the
“Default”
buttons
totoselect
power-savi
- -Use
Userow
the(Channel),
button
start the
searching
for a
Usethe
the
buttons
select
the
country
and
then
use
OK
Once
you have
aMake
channel,
use
the
/power
buttons
to
goproperly
to on
the -the
top
thento
1)
sure
that
the
cable
is
plugged.
information
from
and
when
it
is
highlighted,
press
OK
remote
control
it
highlighted,
press
OK
button
on
the
remote
control
to
activate
it.
buttons
to
select
the
language
andtake
thena use
the
OK
-use
Use
the
Once
you
have
activated
ais
channel,
the
buttons
to
go
to
the
top
(Channel),
mode
isisto
power
saving
mode,
press
the
button
tohave
exit.
mode
isrow
power
saving
mode,
press
the
b
may
few
minutes.
no
EPG
information
displayed
after
you
brought
up
the
EPG
menu,
use
the
/
button
start
searching
for
all
the
DTV/Radio
programs
in
your
area.
This
use
the button
to bring
up thethe
programs
togo
be
broadcast
and
the /control.
buttons to move up
button
to
to
the
next
page.
2)
Press
“STANDBY”
button
on
the
remote
activate
it.
andyou
then
usebroadcast
thedisplay
OK the
buttons
to select is
the
lang
- Use
the
- Use
the
then
theminutes.
button to
toselect
bringthe
uptolanguage
the
programs
towish
be
and
the
buttons
to searching
- When
auto
compl
may
takeuse
a few
and
/ buttons
buttons
to
navigate
the
channel
to
information
from
-use
Use
the
buttons
to select
the
country
andnext
then
use OK
button
to
go
to
the
next
page.
button
to
go
to
the
page.
/
buttons
to
go
to
the
top
row
(Channel),
Once
you
have
activated
a
channel,
the
NOTE:
Make
sure
that
you
are
aiming
at
the
sensor
from
the
TV.
Once
you
have
activated
a
channel,
use
the
/
button
to
go
to
the
top
row
(Channel),
then
when is
it complete,
is highlighted,
OKshow
on the
remote
controlfor
toall
activate
it.
rst
channel
found.
- When auto and
searching
yourpress
TV will
button
tothe
start
searching
the
DTV/Radio
programsbuttons
in your area. This
- Use
the
buttons
select
theprograms
country
and
then
use
OK
- and
Use
the
then
use
thehave
button
toto
bring
up
the
programs
to
be
broadcast
the
/ thenbuttons
use
the
button
to bring
up the
that
is
broadcasting
through
the channel,
and to to select the cou
Once
you
activated
a
channel,
use
the
/
buttons
to
go
to
the
top
row
(Channel),
may
take a few
minutes.
button toPVR/Record
start searching for all the DTV/Radio
programs
in your
area. This
button to start
searching for all the DTV/Rad
You
between
use
the
/ buttons
view
time
use the
to bringtoup
the different
programs
to auto
be slots.
broadcast
the / buttons
to will
move
up
channel
found.the
- When
searchingand
is complete,
your take
TV
show
thecanrstselect
mayPVR/Record
take
a few button
minutes.
may
a few
minutes.
equipment
connected
to the
To
record
a
selected
program,
press
the
RED
button
and
insert
an
You can
select
between
the TV signal
the show
input the
signalrstofchannel
other found. - When auto searching is complete, your TV
- When
auto
searching
is complete,
yourand
TV will
will
Use
this
function
to
switch
t
To
record
a
selected
program,
press
the
RED
button
and
insert
an
equipment
to device
the TV. (see page 35 for more on this).
PVRappropriate
/ connected
RecordUSB
Default
Use
this functionUSB
to switch
to (see
the input
wishon
tothis).
view.
appropriate
device
pagesource
35 foryou
more
PVR/Record
SOURCE button on the
the insert
TV signal
the inputPress
signal
PVR/Record
To
record a selected program, pressYou
thecan
REDselect between
button and
anand
appropriate
USB of other
To can
record
a between
selected
program,
press
the
REDsignal
button
and to
insert
an You can select between
Press
SOURCE
button on
the
remote
control.
Display
equipment
connected
the TV.
Press the TVtosignal
moveand
to desir
You
select
TV signal
and
the
input
of other
the in
device.
To record
a selectedthe
program,
press
the
RED
button and
insert an
Use
this
function
to
switch
to
the
input
source
you
wish
to
view.
appropriate
USB
device
.
equipment
connected
to
the
TV.
equipment
connected
to
the
TV.
Press
to
move
desired
input
source.
Press
the
GREEN
button
to
display
the
information
about
the
DTV
program.
Press OK button to select or c
Display
appropriate
USB
device
page 35
for more
on this).
Use this
function to
switch
to (see
the input
source
youSOURCE
wish
to view.
Use control.
this function to switch to the input sourc
Press
button
on
the
remote
rm. the information about the DTV program.
Press
OKthe
button
to select
or con
Press
GREEN
button
to display
Display
Schedule
Press SOURCE
button on the remote control.
Presssource.
SOURCE button on the remote control
Press
to move to desired input
Display
Press
the
GREEN
button
to
display
the
information
about
the
DTV
program.
Display
Presstothe
YELLOW
button
to bring
up a schedule of programmed recordings.
Press
move
to desired
input
source.
to move to desired input sourc
rm.
Press
OK button
to
or DTV
con Press
Press
GREENbutton
button to
thethe
information
aboutabout
theselect
DTV
program.
Press
thethe
GREEN
todisplay
display
information
the
program.
Schedule
rm. you switch on the TV for the rst time, the
PressSchedule
OKRemind
button to select or con When
Press
OKTime
button
to selectmenu
or con rm.
First
Installation
Press
the YELLOW button to
bring up a schedule of programmed recordings.
Schedule
will be
the screen.of programmed recordings.
Press
thethe
YELLOW
button
todisplayed
bring
upon
a schedule
Press
BLUE button
and use
the
/ buttons
to navigate between programs.
Press the YELLOW button to -bring
up
a
schedule
of programmed
recordings. mode and the “Default”
Schedule
buttons
to select the power-saving
Use the
Powering the LED TV
Time Installation
Selecting an InputFirst
Source
Selecting an Inpu
Selecting an Input Source
Selecting an Input Source
Selecting an Input Source
Remind
power
saving mode,
press the
button to exit.
Press
the
YELLOW
button
bringisup
a schedule
of programmed
recordings.
Next
Day/Prev
Day to mode
Remind
Remind
buttons
to selectbetween
the language
and then use the OK
-use
Use
the
PressPress
the BLUE button
and
buttons
to
navigate
programs.
key to
select
thethe
information
about
next
day/previous
day.
Press
theBLUE
BLUEbutton
button
and
the
/to
buttons
to navigate
between programs.
go to the
next
page.
Press the
and usebutton
the use
/ tobuttons
navigate
between
programs.
- Use the
buttons to select the country and then use OK
Remind
button
to
start
searching
for all the DTV/Radio programs in your area. This
Next
Day/Prev
Day
Next
Day/Prev
Day
Next
Prev Day
navigate between programs.
Press
the Day
BLUE/ button
and use
the / buttons to
may take a few minutes.
Press
Press the
Press
key
select
the
information
about
next
day/previous
key
select
theto
information
next day/previous
/ toto
buttons
select
the about
information
about
nextday.
day / day.
previous day.
- When auto searching is complete, your TV will show the rst channel found.
Next Day/Prev Day
Selecting an Input Source
27
PVR and Time Shift Operation
This television support Personal Video Recorder (PVR) and time shift functions when a
compatible USB storage device is connected. PVR allows you to record digital TV programs
patible
USB storage
is Shift
connected.
allows
tothen
record
digitalor
TV prog
for playback
at a later device
time. Time
allows youPVR
to pause
liveyou
TV and
fast forward
ayback
a later
date.
pause
liveshift
TV functions
and thenarefast
rewindat
until
you catch
upTimeshift,
to the live TVallows
stream you
again.to
PVR
and time
onlyforwa
available
on
Digital
TV
input
source
and
cannot
be
used
to
record
analog
TV
or
other
input
nd until you catch up to the live TV stream again. PVR and timeshift functions ar
sources.
This
television
supportsPersonal
PersonalVideo
Video
Recorder
(PVRand
) and
time
functions
when
a compatible
This
television support
Recorder
(PVR)
time
shiftshift
functions
when
a compatible
27
PVR
shift Operation
PVR
andand
Time Time
Shift Operation
available on Digital TV input source and cannot be used to record analog TV or
USB
is connected.
connected.PVR
PVRallows
allowsyou
youtotorecord
recorddigital
digital
programs
playback
USB storage
storage
device is
TVTV
programs
forfor
playback
at aat a
input
sources.
Setting
up and Connecting a Storage Device
later date.
time. Time Shift
forward
oror
rewind
until
you
catch
later
shift,allows
allowsyou
youto
topause
pauselive
liveTV
TVand
andthen
thenfast
fast
forward
rewind
until
you
catch
The
stepTV
tostream
using PVR
function
isTime
to set
up functions
and
connect
aonly
compatible
USB
storage
device
up
tofirst
again.
PVR
Shift
are
available
TVTV
input
up
to
the live
stream
again.
PVRand
and
time
shift
functions
areonly
availableon
onDigital
Digital
input
such
as
a
flash
drive
or
external
disk.
External
hard
disks
will
require
their
own
power
supply
ing
up
C
onnecti
aTVTV
Stora
ge
vice
source
analog
ororother
input
sources.
be used
usedto
torecord
recordng
analog
other
inputDe
sources.
source
andand
cannot be
as the USB port in the TV may not be used to power large devices.
Setting up
up and Connecting
aaStorage
Device
Setting
Connecting
Storage
Device
To preventand
accidental
data loss,
it is NOT
recommended that you connect a disk drive to
the television for PVR that already contains data. It is best to use a newly formatted and
er supply
as the USB port in the TV may not be used to power large devices.
dedicated disk for recording. Or make sure the USB device has been backed up before
USB
the
may
not
be not
usedbe
toused
power
devices.
as
theport
USBinport
in
may
tolarge
power
large devices.
connecting
toTV
thethe
TV.TV
event accidental data loss, it is not recommended that you connect a disk drive
To
prevent
accidental
data
ititisisnot
you
connect
drive
to to
thethe
PVR
File
System
elevision
for
PVR
that already
data. It isthat
best
to
use aa disk
formatted
and
To
prevent
accidental
dataloss,
loss,contains
notrecommended
recommended
that
you
connect
anewly
disk
drive
television
for PVR that
already
contains
data.
Ittime,
is best
toneed
use ato
newly
formatted
and dedicated
disk
When
connecting
a
new
drive
for
the
first
you
check
the
file
system
and
format
television
that already contains data. It is best to use a newly formatted and
dedicated
diskfor
forPVR
recording.
for recording.
the disk. To do this, access the PVR file system operation from the SETUP menu.
dedicated disk for recording.
1. File
Ensure
the input source is set to “DTV”.
PVR
System
PVR File
System
PVR
System
2. File
Press
the MENU button to display the SETUP Menu.
3. Press the button to select PVR FILE SYSTEM from the SETUP menu and Press OK to
confirm
the disk.
do
access
thePVR
PVR
System
SETUP menu.
theTo
disk.
To this,
do selection.
this,
access the
FileFile
System
optionoption
from thefrom
SETUPthe
menu.
SETUP
OSD Language
TT Language
Hearing Impaired
PVR File System
Aspect Ratio
Blue Screen
First Time Installation
Reset
Software Update(USB)
1. Ensure the input source is set to “DTV”.
1. Ensure the input source is set to “DTV”.
1. Ensure
inputbutton
source
is setthe
to SETUP
“DTV”.Menu.
2. Pressthe
the MENU
to display
2. Press the MENU button to display the SETUP Menu.
English
West
Off
Auto
On
28 36
36
36
Speed
Choose
the disk
for storing
the
content you
want to
record.
Speed
Choose
the
Choose the
the disk
disk for
for storing
storingSpeed
the content
content you
you want
want to
to record.
record.
Speed
Choose the disk for storing the content you want to record.
Check
PVR
File System
Check
PVR
System
Free
Record
Limit
66 H
Speed
Speed
Check“Check
PVR File
File
System
Free
Record
Limit
Select
PVR
File
System”
and
press
OK
to
check
your
USB
device.
Free
Record
Limit
66 H
H
Speed
Check“Check
PVR File
System
Select
PVR
File
System”
and
press
OK
to
check
your
USB
device.
Record
Limit
H
Select “Check PVRFree
File System”
and press
OK to check your USB device.
Select “Check PVR File System” and press OK to check your USB device.
PVR
and
Time Shift
Operation
PVR
and
Time
shift
(Cont.)
36
PVR
and
Time
shift Operation
Operation
36
4.
4.
OK
Record
Limit
Free
Record
Limit
ThePVR
PVRFile
FileSystem
Systemwindow
window
is displayed.
With
OK
The
is displayed.
With
theFree
OK
Free
Record
Limit
OK
4.
The
PVR
File
System
window
is
displayed.
Select
Disk
the SELECT
DISK
option
highlighted,
press
OK.
4. The
PVR
File
System
window
is
displayed.
SELECT
DISK
option
highlighted,
press
OK.
Select
Disk
Select Disk
4. The PVR File System window is displayed.
the
DISK
option
4.With
The PVR
File
System
is
displayed.
With
the SELECT
SELECT
DISKwindow
option highlighted,
highlighted,
With
the
SELECT
DISK
option
highlighted,
4.
The
PVR
File
System
window
is
displayed.
With
the
press
OK.
With
the SELECT
DISK
option
highlighted,
The
PVR
File
System
window
is
displayed.
With
the
OK.
5.4.
Use
the
/press
buttons
to select
the
desired
disk
press
OK.button
4. Use
The
PVR
File
System
window
is
displayed.
With
the
5.
the
/
arrow
to
select
the
desired
press
OK.
SELECT
DISK
option
highlighted,
press
OK.
SELECT DISK option highlighted, press OK.
5.
5.
5.
6.
6.
Select Disk
OK
Select Disk
OK
OK
Check
PVR
Check
PVR File
File System
System
C:
C:
C:
C:
C:
Start
Start
Start
Start
66 H
6H
H
USB
Disk
Check PVR File System
USB
Disk
USB
Disk
Check PVR File System
USB
Disk
USB
USB Disk
Disk
to
use
for
PVR.
This
will
only
apply
to
storage
f
no
USB
device
is
connected,
a
notice
will
advise
you
accordingl
SELECT
DISK
option
highlighted,
press
OK.
USB Disk
disk
to
use
for
PVR.
This
will
only
apply
to
storage
f
no
USB
device
is
connected,
a
notice
will
advise
you
accordingl
USB
Disk
USB
Disk
f
no
USB
device
is
connected,
a
notice
will
advise
you
accordingl
5.
Use
the
arrow
buttons
to
select
the
Format
devices
which
have
been
partitioned
into
return
f
no
USB
device
is
connected,
a
notice
will
advise
you
accordingl
USB
Disk
5.
Use
the
arrow
buttons
to
select
the
Format
devices which
have
been
partitioned
into
return
arrow
buttons
to
select
the
5.
Use
the
Format
desired
disk
to
use
for
PVR.
This
will
only
5.
Use
the
arrow
buttons
to
select
the
Use
the
/
arrow
button
to
select
the
desired
f
no
USB
device
is
connected,
a
notice
will
advise
you
accordingl
Format
Format
desired
disk
to useto
forselect
PVR. the
Thisdesired
will only
to
PVR
FILE/SYSTEM
SYSTEM
window.
Use
the
arrow
button
Time
Format
to
PVR
FILE
window.
desired
disk
to
use
for
PVR.
This
will
only
Time Shift
Shift Size
Use
the
/
arrow
button
to
select
the
desired
f
no
USB
device
is
connected,
a
notice
will
advise
you
accordingl
Format
Size
apply
to
storage
devices
which
have
been
desired
disk
to
use
for
PVR.
This
will
only
Shift
Size
Time
Format
disk
to
use
for
PVR.
This
will
only
apply
storage
apply
to storage
devices
whichto
have
been
disk
to
use
for
PVR.
This
will
only
apply
to
storage
Time
Shift
Size
apply
to
storage
devices
which
have
been
f
your
USB
device
is
recognised
and
working,
you
can
select
FFF
Speed
disk
toFormat
use
for have
PVR.
This
will
only
apply
toPress
storage
partitioned
into
multiple
disks.
OK
Speed
apply
todevice
storage
devices
which
have
been
fff your
USB
is
recognised
working,
you
can
select
partitioned
into
multiple
disks.
Press
OK and
devices
which
been
partitioned
into
Speed
your
USB
device
is
recognised
and
working,
you
can
select
Press
the
button
to
select
“CHECK
PVR
FILE
devices
which
have
been
partitioned
into
Format
partitioned
into
multiple
disks.
Press
OK
your
USB
device
is recognised
working,
you can6 Hr.select F
Speed
devices
have
been
partitioned
into
partitioned
into“CHECK
multiple
disks.
PressSystem
OK and Free
Press
thef which
arrow
tostart
select
PVR
FILE
Record
Press
OK
to
Format
(File
Size).
Free
Record Limit
your
USB
device
is
recognised
and
working,
you can66 Hr.
select F
Limit
SYSTEM”
,
then
press
the
OK
button.
When
the
Press
OK
to
start
Format
(File
System
Size).
Record
Limit
Hr.
Free
FILE
SYSTEM
window.
Press
OK
to
start
Format
(File
System
Size).
f
your
USB
device
is
recognised
and
working,
you
can
select F
FILE
SYSTEM
window.
SYSTEM”
on
press
“OK”
button.
When
the
media
Free
Record
Limit
6
Hr.
Press
OK
to
start
Format
(File
System
Size).
return
to
PVR
FILE
SYSTEM
window.
OK
FILE
SYSTEM
window.
media
has
been
checked,
select
“FORMAT”
and
return
to
PVR
FILE
SYSTEM
window.
OK deleted.
Press
OK
to
start
Format
(File
System
Size).
NOTE:
If
you
select
Format,
all
data
will
be
FILE
SYSTEM
window.
OK
return
tochecked
PVR
FILEselect
SYSTEM
window.
has
been
”FORMAT”
and press
“OK”
NOTE:
If
select
Format,
all
data
will
be
OK deleted.
Press
OK
start
Format
(File
System
Size).
NOTE:
IfIf you
you
select
Format,
all
data
will
be
deleted.
press
OK
button
to to
confirm.
NOTE:
you
select
Format,
all
data
will
be
deleted.
USB
Disk
NOTE:
If
you
select
Format,
all
data
will
be
deleted.
USB
device
is
recommended
format
in
FAT32
system
type.
USB
Disk
USB
device
is
recommended
format
in
FAT32
system
type.
Press
the
arrow
to
select
“CHECK
PVR
FILE
USB
Disk
NOTE:
If
you
select
Format,
all
data
will
be
deleted.
Press
the
arrow
to
select
“CHECK
PVR
FILE
USB
device
is
recommended
format
in
FAT32
system
type.
If
no
USB
device
is
connected,
a
notice
will
advise
you
accordingly.
USB
Disk
If
no
USB
device
is
connected,
a
notice
will
advise
you
accordingly.
USB
device
is
recommended
format
in
FAT32
system
type.
Press
the
arrow
to
select
“CHECK
PVR
FILE
6.
Press
the
arrow
to
select
“CHECK
PVR
If
no
USB
device
is
connected,
a
notice
will
advise
you
accordingly.
Press
the
arrow
to
select
“CHECK
PVR
USB
device
is
recommended
format
in
FAT32
system
type.
Use
the 6.
/
buttons
to
select
the
file
system
SYSTEM”
on
press
“OK”
button.
When
the
media
6. Press the
arrow to select “CHECK PVR
6.
6.
7.6. SYSTEM”6.on
press
“OK”
button.
When
the
media
Ifselect
no
USB
device
is connected, aformat
noticeFile
willSystem
advise
you
accordingly.
Press
the
arrow
to
“CHECK
PVR
Size
FILE
SYSTEM”
on
press
“OK”
button.When
USB
device
isSpeed
recommended
in FAT32
system type.
Format
Press
the
arrow
toFormat
select
“CHECK
PVR
SYSTEM”
on
press
“OK”
button.
When
the
media
File
System
Size
FILE
SYSTEM”
on
press
“OK”
button.When
7. Use
the
/options
Format
type.
The 6.
are
FAT32
or
Hi
File
File
System
Size
has
been
checked
select
”FORMAT”
and
press
FILE
SYSTEM”
on
press
“OK”
button.When
If
your
USB
device
is
recognised
and
working,
you
can
select
Format.
has
been
checked
select
”FORMAT”
and
press
Format
File
System
Size
If
your
USB
device
is
recognised
and
working,
the
media
has
been
checked
select
FILE
SYSTEM”
on
press
“OK”
button.When
you
can
select
has been
select
”FORMAT”
and
press
File
System
Size
the
hasare
been
checked
select
working,
you can
select Format.
Format.
system
type.checked
Themedia
options
FAT32
or
Hi
Speed
IfIf your
USB
device
is
recognised
and
File
System
Size
System.
Press
OK
to
start
Format
(File
System
Size).
the
media
has
been
checked
select
your
device
is recognised
and
working,
you can
select
Format.
Press
OKUSB
to
start
Format
(FilePVR
System
Size).
File System
Size
the media has been checked
select
File
System
Type
FAT32
Size).
PVR
File
System
Type
FAT32
Press
OK
to
start
Format
(File
System
File System.
NOTE:
IfIf you
select
Format,
all
data
will
be
deleted.
PVR
File
System
Type
FAT32
Press OK
to start
Format
(File
System
Size).
NOTE:
you
select
Format,
all
data
will
be
deleted.
PVR
File
System
Type
FAT32
will
be deleted.
PVR
File
System
Type
NOTE: USB
IfIf you
select
Format,
all
data
File
System
Type systemFAT32
FAT32
device
recommended
format
in
FAT32
type.
you
selectis
all PVR
data
will
be deleted.
PVR
File
System
Size
All
USB
device
isFormat,
recommended
format
8.7. The
disk
will
now start format. NOTE:
Time will
vary
in
FAT32
type.
PVR
File
System
Size
All
PVR
File
System
Type system
FAT32
format
in
FAT32
system
type.
Use
the
/
USB
device
is
recommended
PVR
File
System
Size
All
7.
Use
the
/
USB
device
is
recommended
format
in
FAT32
system
type.
7.
Use
the
arrow
buttons
to
select
the
PVR
File
System
Size
All
File
System
Size
PVR
File
System
Size
7.
Use
the
arrow
buttons
to
select
the
Use
the
/
File System
System
Size
depending
on
the
disk
size
and
contents.
When
PVR
File
System
Size
All
File
Size
8.7. The
disk
will
now
format.
Time
will
vary
depending
File
System
Size
7.
Use
the
arrow
buttons
to
select
the
system
type.
The
options
are
FAT32
or
Hi
Speed
SD
Mins
File 50
System
Size
PVR File System
Size
All
system
type.
The
options
are
FAT32
or
Hi
Speed
7.
Use
the
arrow
buttons
to
select
the
SD
50
Mins
File
System
Size
SD
50
PVR File System
TypeMins FAT32
system
type.
The
options
are
FAT32
or
Hi
Speed
format
is
completed,
the
PVR
FILE
SYSTEM
PVR
File
System
Type
FAT32
on
the
disk
size
and
contents.
When
format
is
PVR
File
System
Type
FAT32
SD
50
Mins
SD
50
Mins
File
System.
PVR
Type
SDSize
50 Mins FAT32
PVR File
File System
System
Type
FAT32
or
Hi
File
File
PVR
All
or be
Hi Speed
Speed
File System.
System.
PVRFile
FileSystem
System
Type
SD
50
Mins FAT32
14
Mins
PVR
System
Size
All
File System.
System.
PVR File
FileHD
System
Size
All
window
will
displayed
again.
complete
the
FILE SYSTEM
window will be
or
Hi
File
14
Mins
PVR
System
Size
All
PVR File
FileHD
System
Size
All
HD
14
Mins
orPVR
Hi Speed
Speed
File System.
System.
SD 5014
MinsMins All
PVR FileHD
System
Size
HD
SD 14
5014
Mins
Mins
HD
Mins
SD
50
Mins
SD
Mins
displayed again.
SD 50
5014
MinsMins
HD
HD
SD14
50Mins
Mins
HD
14
Mins
The
disk
will
now
format.
Time
will
vary
HD
14
Mins
8.
The
disk
will
now
format.
Time
will
vary
HD
HD 14
14 Mins
Mins
9.8.
EXIT
to
close
thenow
window
and
return
to
TV
8.
The
disk
will
format.
Time
will
vary
8. Press
The
disk
will
now
format.
Time
will
vary
8.
The
disk
will
now
format.
Time
will
vary
HD 14 Mins
depending
on
the
disk
size
and
contents.
8.
The
disk
will
now
format.
Time
will
depending
on
the
disk
size
and
contents.
on
the
disk
size
and
contents.
8.depending
The
disk
will
now
format.
Time
will vary
vary
viewing.
depending
on
the
disk
size
and
contents.
depending
on
the
disk
size
and
contents.
9. Press
EXIT
to
close
the
window
and
return
to TV
depending
on
the
disk
size
and
contents.
When
format
is
complete
the
PVR
FILE
SYSTEM
When
is
complete
the
FILE
SYSTEM
When
format
complete
the
PVR
FILE
depending
onisthe
diskPVR
size
and
contents.
When
format
the
PVR
FILE
When format
format
is displayed
complete
the
PVR
FILE
SYSTEM
When
format is
is complete
complete
the
PVR
FILE
viewing.
window
will
be
again.
SYSTEM
window
will
be
displayed
again.
When
format
is
complete
the
PVR
FILE
window
will
be
displayed
again.
SYSTEM
window
will
be
displayed
again.
The disk
is
ready
for
use
now.
Press
the
keys
to
window will
be displayed
again.
SYSTEM
be
again.
the
keys
to select
select PVR
PVR File
File System
System Type,
Type, then
then press
press OK
OK to
to format
format
SYSTEM window
window will
willPress
be displayed
displayed
again.
Press the
keys to select PVR File System Type, then press OK to format
the
USB
device.
The
Format
belowType,
appears
Press
the
keys
to
selectDisk
PVRscreen
File System
then press OK to format
the
USB
device.
The
Format
Disk
screen
appears
Press
the
keys
to
select
PVR
File
System
Type,
then
OK
theto
USBselect
device.
The
Format
Disk
screen below
below
appears
The
disk
will
now
ready
to
use
for
recording.
Press
the
keys
to
select
PVR
File
System
Type,
then
press
OK
Press
the
keys
PVR
File
System
Type,
then press
OK
9.
Press
EXIT
to
close
the
window
and
to
the
USBreturn
device.
The Format
Disk
screen below
appears
After
Formatting
the
USB
device,
the
system
will
9.
Press
EXIT
to
close
the
window
and
return
to
Press
the
keys
to
select
PVR
File
System
Type,
then
press
OK
Press
the
keys
to
select
PVR
File
System
Type,
then
press
OK
9.
Press
EXIT
to
close
the
window
and
return
Press
the
keys
to
select
PVR
File
System
Type,
then
OK
9. TV
Press
EXIT
to
close
the
window
and
return
to
9.
Press
EXIT
to
close
the
window
and
return
viewing.
9.
Press
EXIT
to
close
the
window
and
return
the
USB
device.
The
Format
Disk
screen
below
appears
establish
a the
PVR
file
system
according
to
the
previous
TV
viewing.
USB
device.
The
Format
Disk
screen
below
appears
the
USB
device.
The
Format
Disk
screen
below
appears
9.to
Press
EXIT to close
theFormat
window andDisk
returnscreen below appears
TV
viewing.
TV
viewing.
to
TV
viewing.
the
USB
device.
The
toUSB
TV
viewing.
the
device.
The
Format
Diskscreen
screenbelow
belowappears
appears
the
USB
device.
The
Format
Disk
to
viewing.
confirmed PVR file
system
size.
to TV
TV
viewing.
System
size. The
disk
is now
ready
to
use for
recording.
Speed
The
disk
now
ready
to
The
disk
is
now
use
for
recording.
Theready
disk is
isto
now
ready
to use
use for
for recording.
recording.
The
disk
is
now
ready
to
use
for
recording.
The
diskSYSTEM,
isto
now
to show
use forthe
recording.
The disk
is PVR
now
ready
useready
for
recording.
After
check
FILE
it will
USB
available speed and remind you to operate it safely
Speed
Aft
Aft
with
this available
After
PVR File speed.
System, it shows the USB available
Aft check
speed and remind you to operate it safely with this
available
speed.
Speed
Speed
Speed
After
Check
PVR
File
System,
itit shows
the
USB
available
speed
and
remind
you
to
operate
itit
After
Check
PVR
File
System,
shows
the
USB
available
speed
and
remind
you
to
operate
After
Check
PVR
File
System,
it
shows
the
USB
available
speed
and
remind
you
to
operate
it
safely
with
this
available
speed.
safely
with
this
available
speed.
safely with this available speed.
29
PVR and Time Shift Operation (Cont.)
Record Start (Instant Recording)
You can press the REC button to start (and the button to stop) recording
directly. If you want to stop recording, you should select STOP in the operation
menu and press OK to operate.
29
PVR
Time
shift Operation
PVR
and and
Time Shift
Operation
Record
Start
(Instant
Recording)
The
system
can
record
and play back DTV at the same time. Select the appropriate
Record
Start
(Instant
Recording)
action
from
the
panel
above
and
press
OK
tobutton
operate.
Youcan
can
press
the
REC
button
start
(and
the
button
to stop)
recording
directly.
You
press
the
REC
button
toto
start
(and
the
to stop)
recording
directly.
If you want
to
stopwant
recording,
you
should select
Stop inselect
the operation
menu
and press
OK button
to operate.
If you
to stop
recording,
you should
Stop in the
operation
menu
and press
OK
button to operate.
The icon will appear when you start recording.
The system can record and play back DTV at the same time. Select the appropriate action from the
When
setthe
theappropriate
timer record,
it will
The system
and
back DTV at the same
time.you
Select
action
from th
panel
above can
andrecord
press OK
toplay
operate.
start recording automatically.
panel above and press OK to operate.
Press
to play what you have
The icon will be appear when you start to record.
recorded, note it does not stop
The icon will be appear when you start to record.
are watching, note it does not stop recording.
Press to stop recording.
Time Recorder
1.
recording.
When you
totoset
the
timer
record,
it will
When
you
success
set
the
timer
record,
it
Press
tosuccess
fast backward
when
start recording.
will start recording.
playing.
Press Play to play what you have recorded, but th
Press
Play
play
what youwhen
have recorded,
recording
on.
Press
toistostill
fast
forward
playing.
but
the
recording
is
still
on.
Press FB to
fastprevious
backward.video.
Press
toplay
play
Press
FB
to
play
fast
backward.
Press
FF
to
play
fast
forward.
Press
to play next
video.
Press
FF
to
play
fast
forward.
Press
Pre.
to
play
the
previous
video.
Press again to pause the
video you
Press
Pre. to
thenext
previous
play the
video.video.
Press Next
to play
Press Pause
Next to
the
video.
to play
pause
thenext
scene
of video you are
watching,
butto
the
recording
is still of
Press
Pause
pause
the scene
on.video you
are
watching,
butrecording.
the recording is still on.
Press
Stop to stop
Press Stop to stop recording.
Time
Recorder
Time Recorder
Press the “EPG” button on the remote control, the EPG menu will appear on the
Press
“EPG”
button
remote
control,the
theEPG
EPGmenu
menuwill
willappear
appearon
onthe
thescreen,select
screen. Select
1. Press
thethe
“EPG”
button
onon
thethe
remote
control,
screen.
Select required
a programme
required and
press
the REC
button tomenu.
display the
a programme
button
display
theRECORDER
RECORDERmenu.
a programme
required and and
presspress
the theRECREC
button
toto
display
the
recording menu.
! " #$%&' ( )$*+#
? 8=: 8$
@6A /
( 5$, 6178/
" !$9 - 7:
' / 2$, - 18;
( 5$, 6178/
" !$9 - 7:
' / 2$, - 18;
" <$' =8/
" <$' =8/
B1.$@6A /
B1.$@6A /
( 5$, 6178/
( 5$, 6178/
" >$9- 7:
" >$9- 7:
' / 2$, - 18;
3
" <$' =8/
, - . /$0 12/
2.
Press
the / / buttons
buttonsto
to select
select “Start
item,
press
thethe/ / buttons
to set
2. Press
the
"SrartTime”
Time"
item,
press
buttons
to the
set the
4
30
PVR and Time Shift Operation (Cont.)
30Press
PVR
shift
the /and
buttonsTime
to select “ Start
Time” item,Operation
press / the buttons to set
30PVR
and
Time
shift Operation
the beginning
recording
time.
2.
PVR
and
TimetoShift
Operation
PVR
Time
shift
Operation
Use
the
/ and
buttons
select
“End
Time”
item, press
the / buttons to
PVR
and
Time
Shift
Operation
PVR
and
Time
shift
Operation
schedule
list.
select the end time recorded.
3.
4.
schedule
list.“EPG” button
5. Press
the
then press
display
Schedule time
List. will be added
4.
Aschedule
confirmation
message
will the
be“YELLOW”
displayedtoand
thethe
recording
4.
schedule list.
list.
5. Press
the the
“EPG”
button then
press the “YELLOW” to display the Schedule List.
into
schedule
list.
schedule
list.
schedule
list.
5. Press the “EPG” button then press the “YELLOW” to display the Schedule List.
5. Press the “EPG” button then press the “YELLOW” to display the Schedule List.
Press the RED button to delete the channel you have recorded in the schedule.
Press
thethe
REDYELLOW
button to
delete
channel
you recorde
have recorded
thenew
schedule.
Press
button
tothe
enter
the timer
and addinthe
channel in the
Press
the
RED
button
to
delete
the
channel
you
have
recorded
in
the
schedule.
schedule.
Press
the YELLOW
to delete
enter the
timer recorde
andrecorded
add theinnew
in the
Press
the RED button
button to
the channel
you have
thechannel
schedule.
Press
the
RED
button
to
delete
the
channel
you
have
recorded
in
the
schedule.
Press
the
YELLOW
button
to
enter
the
timer
recorde
and
add
the
new
channel
in the
schedule.
Press
theRED
RED button
to delete
the channel
you haveyou
recorded
the schedule.
Press
the
button
to delete
the channel
haveinrecorded
in the schedule.
schedule.
Press
the
YELLOW
button to enter the timer recorde and add the new channel in the
Viewing
Recorded
Programs
Viewing
Recorded
Programs
schedule.
Viewing
Recorded
Programs
A list of
recorded
programs
can Progr
be displayed
Vi
ew ing
Recorded
am s by pressing
Viewing
Recorded
Programs
Viewing
Recorded
Programs
Viewing
Recorded
Programs
A
list
of
recorded
programs
can
be
displayed
by
the
on thecan
remote
control
when
inpressing
DTV by
A list
ofINDEX
recorded
be displayed
bydisplayed
pressing
Vi ew
ingprograms
Progr
amcan
s display
Abutton
list
ofRecorded
recorded
programs
be
A
list
of
recorded
programs
can
be
Neighbours
Viewing
Recorded
Programs
the
INDEX
button
on
the
remote
control
when
in
DTV
A list
recorded
programs
can
be
displayed
by
pressing
Aoflist
ofpressing
recorded
programs
can
be
displayed
by
pressing
mode.
You
can
navigate
through
the
list
by
using
the
the
INDEX
button
on
the
remote
control
when
in
DTV
Vi
ew
ing
Recor
ded
Progr
am
s
the INDEX
button
on
the
remote
control
A list of the
recorded
programs
can
bethe
displayed
by
by
pressing
INDEX
button
on
remote
Neighbours
mode.
You
can
navigate
through
the
list
bywhen
using
the
INDEX
button
on
the
remote
control
when
inthe
DTV
the
INDEX
on
the
remote
control
DTVthe
Aarrow
list
ofpressing
recorded
programs
can
beon
displayed
by
pressing
buttons
on
the
remote.
Press
RED
tointhe
delete
mode.
You
can
navigate
through
the
list
by
using
Viwhen
ew
ing
Recor
ded
Progr
am
sbutton
in
DTV
mode.
You
can
navigate
through
Abutton
list
of
recorded
programs
can
be
displayed
by
the
INDEX
button
the
remote
control
Neighbours
control
when
in
DTV
mode.
You
can
navigate
arrow
buttons
on
the
remote.
Press
RED
button
toremote.
delete
mode.
You
can
navigate
through
the
list
by
using
the
mode.
can
navigate
through
the
list
by
using
the
the
INDEX
button
on
the
remote
control
when
in
DTV
the
current
highlighted
recorded
program
or
INFO
to
arrow
buttons
on
the
remote.
Press
RED
button
toremote
delete
list
by
using
the
arrow
buttons
on
the
pressing
the
INDEX
button
on
the
control
when
in
DTV
mode.
You
can
navigate
through
the
AYou
list
of
recorded
programs
can
be
displayed
by
through
the
list
by
using
the
button
the
the
current
highlighted
recorded
program
oron
arrow
buttons
on
the
remote.
Press
RED
button
toINFO
delete
arrow
buttons
on
the
remote.
Press
RED
button
totodeletethe Neighbours
mode.
You
can
navigate
through
the
list
using
the
display
detailed
information.
Press
OK
toby
commence
the
current
highlighted
recorded
program
or
INFO
to
Press
RED
button
to
delete
the
current
highlighted
when
in
DTV
mode.
You
can
navigate
through
list
by
using
the
arrow
buttons
on
the
remote.
pressing
the
INDEX
button
on
the
remote
control
display
detailed
information.
Press
OK
to
the
current
highlighted
recorded
program
orcommence
INFO
to
the
current
highlighted
recorded
program
or
tothe
remote.
Press
RED
button
to
delete
the
arrow
buttons
on
the
remote.
Press
RED
button
toINFO
delete
recorded
program
or
INFO
to
display
detailed
playback
of
the
selected
recorded
program.
display
detailed
information.
Press
OK
commence
list
using
the
arrow
buttons
on
the
remote.
Press
RED
button
to
delete
the
current
highlighted
when
inby
DTV
mode.
You
can
navigate
through
playback
of
the
selected
program.
display
detailed
information.
Press
OK
toOK
commence
information.
Press
OK
to
commence
playback
display
detailed
information.
Press
toor
commence
the
current
highlighted
recorded
program
INFO
to
Press
RED
button
toprogram.
delete
the
current
highlighted
recorded
program
orrecorded
INFO
tobuttons
display
detailed
playback
of
the
selected
recorded
current
highlighted
recorded
program
or
INFO
list
by
using
the
arrow
on
the
remote.
38
of
the
selected
recorded
program.
playback
of
the
selected
recorded
program.
recorded
program
or
INFO
to
display
detailed
information.
Press
OK
to
commence
playback
playback
of
the
selected
recorded
program.
display
detailed
information.
Press
OK
to
commence
Press
RED
to delete
the
current
highlighted
recorded
programs,
youOK
can
control
When
playing
backbutton
to
display
detailed
information.
Press
to
38
information.
Press
OKprogram.
to
commence
ofplaying
thethe
selected
recorded
program.
recorded
program
or
INFO
toSTOP,
display
detailed
playback
of
selected
recorded
the
playback
using
the
PLAY/PAUSE,
FFWD,
and FREV
recorded
programs,
you
can
control
When
playing
back
38
When
back
recorded
programs,
you
canplayback
control
commence
playback
of
the
selected
recorded
When
playing
back
recorded
programs,
you
can
of the
selected
recorded
program.
information.
Press
OK
toprograms,
commence
playback
recorded
you
can
control
When
playing
back
buttons
on
the
remote
as
you
would
for
media
mode.
the
playback
using
the
PLAY/PAUSE,
STOP,
FFWD,
and
FREV
the
playback
using
the
PLAY/PAUSE,
STOP,
FFWD,
and
38
When
playing
back
recorded
programs,
you
can
control
program.
the
playback
using
the
PLAY/PAUSE,
STOP,
When
playing
back
recorded
programs,
you
can
ofcontrol
the
selected
recorded
program.
theon
playback
using
the
PLAY/PAUSE,
STOP,
FFWD,
and
FREV
When
playing
back
recorded
programs,
you
can
control
buttons
the
remote
as
you
would
for
media
mode.
FREV
buttons
on
the
remote
as you
would
for
media
the
playback
using
the
PLAY/PAUSE,
STOP,
FFWD,
and
Recorded
List
FFWD,
and
FREV
buttons
on
the
remote
as
you
When
playing
back
recorded
programs,
you
can
control
the
playback
using
the
PLAY/PAUSE,
STOP,
Play
buttons
on
the
remote
you
would
for
media
mode.
the
playback
using
the
PLAY/PAUSE,
STOP,
FFWD,
and
FREV
mode.
FREV
buttons
on
the
remote
as
you
would
for
media
Display
the
list
ofas
recorded
programs
by
pressing
the INDEX button
Recorded
List
would
for
media
mode.
control
the
playback
using
the
PLAY/PAUSE,
STOP,
FFWD,
and
FREV
buttons
on
the
remote
as
you can
When
playing
back
recorded
programs,
you
When
playing
back
recorded
programs,
you
Play
Press
OK
to
play
the
selected
program,
or
press
to
buttons
on
the
remote
as
you
would
for
media
mode.
when
in
DTV
mode.
mode. would
Display
themedia
list
ofList
recorded
programs
by remote
pressingas
the
INDEX button
Recorded
FFWD,
and
FREV buttons
onPLAY/PAUSE,
the
you
for
mode.
control
the
playback
using
the
STOP,
Play
can
control
the
playback
using
the
, icon
, to
/will
play
the
recorded
program
directly.
The
Press
OK
to
play
the
selected
program,
or
press
when
in
DTV
mode.
Display
the
list
of
recorded
programs
by
pressing
Recorded
List
would
for
media
mode.
tothe INDEX button
Play:
Press
OKplay
to on
play
the
selected
program,
press
FFWD,
and
FREV
buttons
on
theyou
remote
as
you
Play
Play
Press
OK
to
the
selected
program,
ororpressing
press
to
,appear
/ recorded
buttons
the
remote
as
would
forthe
Play
when
you
start
playback.
play
the
program
directly.
The
icon
will
when
in
DTV
mode.
Display
the
list
of
recorded
programs
by
INDEX button
would
for
media
mode.
play
the
recorded
program
directly.
The
icon
towillto
or
press
Play:
Press
OK
to play
the
selected
program,
Play
Press
OK
to
play
the
selected
program,
or
press
toplay
playthe
the recorded program directly.
Press
OK
to
play
the
selected
program,
or
press
play
the
recorded
program
directly.
The
icon
will
Press
OK
to
play
the
selected
program,
or
press
to
Play
appear
when
you
start
playback.
media
mode.
when in DTV mode.
appear
when
you
start
playback.
play
the
recorded
program
directly.
The
icon
will
Delete
Play
The
icon
will
appear
when
you
start
playback.
recorded
program
directly.
The
willwill
appear
when
you
Press
OK
to
play
the
program,
or
press
toplay
play
the
recorded program directly.
Press
OK
toyou
play
theselected
selected
program,
oricon
press
to
the
Play
when
start
playback.
playappear
the
recorded
program
directly.
The icon
appear
when
you
start
playback.
start
playback.
Delete
Play
The
icon
will
appear
when
you
start
playback.
Press
OK
to
play
the
selected
program,
or
press
to
play
the recorded program directly.
recorded
program
directly.
The
icon
will
appear
when
you
Press
OK
to
play
the
selected
program,
or
press
to
play
the
Press
the
RED
button
to
delete
the
selected
program.
Play
appear
when
you start playback.
Delete
Play
Delete
The
icon
will
appear
when
you
start
playback.
start
playback.
recorded
program
directly.
The
icon
will
appear
when
you
Press
OK
to
play
the
program,
or
toplay
playthe
the recorded program directly.
Press
OK
to
play
theselected
selected
program,
orpress
press program.
to
Press
the RED
button
to
delete
the
selected
program.
Delete:
Press
the
RED
button
todelete
delete
the
selected
Info
Press
the
RED
to
the
selected
program.or press to play the recorded
Delete
Delete
Press
the
OK
button
totodirectly.
play
the
selected
start
playback.
Delete
The
icon
willbutton
appear
when
you
start
recorded
program
The
icon playback.
willprogram,
appear
when you
Press
the
RED
button
delete
the
selected
program.
Delete:
the
RED
button
delete
the
selected
program.
Delete
PressPress
the
Display
green
button
to
bring
upprogram.
or
close
information.
Press
theor
RED
button
to delete
the
selected
program.
Info
Press
the
RED
button
toto
delete
the
selected
Delete
program
directly.
The
icon
will
appear
when
youprogram
start playback.
start
playback.
Info
Press
the
RED
button
to
delete
the
selected
program.
Info
Press
the
RED
button
to
delete
the
selected
program.
Delete
PressInfo:
theInfo
Display
or
green
button
tobutton
bring
up
or
close
information.
Press
the
RED
button
delete
the selected
program.
Delete
Press
the
Display
or
button
to
bring
or close
program
information.
Press
the
Display
ortogreen
green
to
bring
up up
orprogram
close
program
information.
Info
Time
shift
Mode
Press
the
Display
or
green
button
to
bring
up
or
close
program
information.
Press
the
RED
button
to
delete
the
selected
program.
Info
Press
the
RED
button
to
delete
the
selected
program.
Delete
Info:
Press
the
Display
or
green
button
to
bring
up
or
close
program
information.
Press the
or green button to bring up or close program information.
InfoDisplay
Delete
Press
the
Display
green
button
to bring
up
or close
Info
Time
shift
Mode
Time
shift
may
be
used
toorbutton
pause
and
control
live
TV
only).
When
watching digital TV
Press
the
Display
or
green
tobutton
bring
upbring
or
close
program
information.
Press
the
RED
button
delete
the
selected
program.
Press
the
Display
ortogreen
to
up
or(digital
closecontrol
program
information.
Timeshift
Mode
Info
Time
Shift
Mode:
Time
Shift
may
be
used
to
pause
and
live
TV (digital only). when
program
information.
Press
the
Display
or
green
button
to
bring
up
or
close
Press
the
RED
button
to
delete
the
selected
program.
Info
Time
shift
Mode
program,
press
the
PLAY/PAUSE
button
to
start
shift
mode.
The playback
will
pause
Time
shiftTimeshift
may
be
used
to be
pause
and
control
live
TVtime
only).
When
watching
digital
TV and
Press
the
Display
or green
button
toand
bring
up
or(digital
close
program
information.
Mode
Timeshift
may
used
to
pause
control
live
TV
(digital
only).
When
watching
digital
watching
digital
TV
program,
press
the
PLAY/PAUSE
button
to start
timeTV
Time
Shift
Mode:
Time
Shift
may
be
used
totopause
and
control
live
TV (digital
only).
when
program
information.
Press
the
Display
or
green
button
bring
up
or
close
Info
Time
shift
Mode
Time
shift
may
be
used
to
pause
and
control
live
TV
(digital
only).
When
watching
digital
TV
recording
will
commence
in
the
background.
To
resume
playback,
press
PLAY/PAUSE
again.
You
program,
press
the
PLAY/PAUSE
button
to
start
time
shift
mode.
The
playback
will
pause
and
Timeshift
Mode
program,
press
the
PLAY/PAUSE
button
to
start
timeshift
mode.
The
playback
will
pause
Timeshift
may
be
used
to pause
and
control
live
TV
(digital
only). When
watching
digital
shift
mode.
The
will
pause
and recording
will
commence
inTV
theand
watching
digital
TVplayback
program,
press
the
PLAY/PAUSE
button
to start
time
program
information.
Press
the
Display
or
green
button
to
bring
up
or
close
program,
press
the
PLAY/PAUSE
button
to
start
time
shift
mode.
The
playback
will
pause
and
Time
shift
may
be
used
to
pause
and
control
live
TV
(digital
only).
When
watching
digital
TV
Info
recording
will
commence
in
the
background.
To
resume
playback,
press
PLAY/PAUSE
again.
You
recording
will
commence
in pause
the
background.
To
resume
playback,
press
PLAY/PAUSE
again.TV
Timeshift
Mode
Timeshift
may
be used
to
and
control
live
TV
(digital
only).
When
watching
digital
program,
press
the
PLAY/PAUSE
button
toplayback,
start
timeshift
mode.
The
will
and
background.
To
resume
press
PLAY/PAUSE
again.
Youpause
can
also
shift
mode.
The playback
will
pause
and
recording
willplayback
commence
in
the
program
information.
recording
will
commence
inPLAY/PAUSE
the
background.
To
resume
playback,
press
PLAY/PAUSE
again.
You
program,
press
the
PLAY/PAUSE
button
to button
start
time
shift
mode.
The
playback
will pause
and
Press
the
DISPLAY
or
GREEN
button
to
bring
up
or
close
information.
program,
press
the
to
start
timeshift
mode.
The
playback
will
pause
recording
will
commence
in
the
background.
To
resume
playback,
press
PLAY/PAUSE
again.
Timeshift
may
be
used
to
pause
and
control
live
TV
(digital
only).
When
watching
digital
background. To resume playback, press PLAY/PAUSE again. You can also TV and
recordingprogram,
will
commence
inPLAY/PAUSE
the background.
To
resume
press
again.and
You
recording
will
in the
background.
Toplayback,
resume
playback,
press PLAY/PAUSE
again.
press
thecommence
button
to start
timeshift
mode.
The PLAY/PAUSE
playback
will pause
only be able
to playback
at normalinspeed.
recording
will commence
the background. To resume playback, press PLAY/PAUSE again.
you will only be able to playback at normal speed.
onlyNOTE:
be able to playback at normal speed.
youonly
will only
be able
tocancel
playback
at normal
speed.
Press
the
STOP
time
shift
mode.
you
will
able
to to
playback
normal
speed.
NOTE:
only
bePress
ablebe
tobutton
playback
at
normal
speed.
the
STOP
button
to at
cancel
timeshift
mode.
will only
be abletime
to playback
at normal speed.
Press the STOPyou
button
to cancel
shift mode.
38
38
38
38
31
PVR and Time Shift Operation (Cont.)
Time Shift Mode
Time Shift may be used to pause and control live TV (in DTV mode only). When
watching digital TV program, press the button to start time shift mode. The
playback will pause the recording will commence in the background. To resume
playback, press button again. You can also use / to skip thought the buffered
content.
NOTE: Whilst you can fast forward through the recording buffer, once you catch up
to live TV, you will only be able to playback at a normal speed.
Press button to cancel the time shift mode.
31
32
The
TheOn-Screen
On-ScreenDisplay
Display(OSD)
(OSD)Menu
Menu
Navigating
Navigatingthrough
Throughmenus
Menus
•Pr Press the MENU button ffor the OSD main menu to appear. r.
•Pr Press
f for the main menu to display sequentially:
n
y:
Channel
Picture
Sound
Time
Lock
Setup
Pc r
T
L
… ...
Menu options displayedy in greygrare note
r available
v in that mode.
e.
Common
Commonoperation
Operationprocedures
Procedures
•F For each main menu,rpress or OK
K button
n to enter its submenu.
.
•
Press / buttons to select the desired adjustment option.
Pr
/
c
r
n
•
Press / buttons to choose your desired value.
Pr
/
y
r v e.
•
After having set an option, press MENU to return to the upper level menu, or press EXIT
Af to quit the menu screen directly.
r
r r
v
r
T
r
rec y.
OSD Menu Structure
OSD menu structure
A oT
AT
T
T
T
T
A
nfor
Av
T
T
Av
T
T
L
Pc r
T
L
ys
P
Con r
wor
Progr
Br
P ren
C
ce
Av
T
Lock
Tn
Ho
r
C
Av
y
-
C
T
T
Progr
g
Zone
Av
T
r
re
c
T
r
Tr
r
F
A
ce
ys
c
creen
A oV
F
Av
T
T
of w r
Av
T
Av
T
33
32 32
Menu
Options
ininTV
TV
Mode
Menu
Optionsin
TVMode
Mode
Menu
Options
Channel Menu
Channel menu
Channel
Press MENUmenu
button to display the main menu.
Press [MENU] to display the main menu.
Press
to display
the
main menu.
Press [MENU]
/ button
to select
CHANNEL
in the main
Press / to select Channel in the main
menu, then
press
or OK button
to enter.
Press
/
to
select
Channel
in
the
main
menu, then press or [OK] to enter.
Press then
or OKpress
button or
to start
menu,
[OK] searching
to enter. channels
automatically.
Auto tuning
Auto Tuning
ATV ManualT uning
Auto Tuning
DTV ManualT uning
ATV ManualT uning
Programme Edit
CHANNEL
DTV ManualT uning
Signal Information
Programme Edit
CHANNEL
AutoPress
tuning
or [OK] to start searching channels
Press
or
[OK]
to start searching channels
ATVautomatically.
Manual Tuning
automatically.
Press or OK button to enter the ATV Manual
Signal Information
Move
Move
MENU
MENU
ATVsubmenu.
Manual tuning
Tuning
ATV
Manual
tuning
• Press
Current
Press
/ the
buttons
to select
the channel
or CH:
[OK]
to enter
ATV Manual
Tuning
sub-menu.
number
store.
PresstCurrent
or [OK]you
to want
enter
Manual
CH:
Presstothe
/ ATV
to select
theTuning
channelsub-menu.
number
•
Colour
System:
Press
/
buttons
to
change
the colour
you want
to store.
tCurrent
CH: Press
/ to select the channel number
system to Auto, SECAM, PAL.
tColour
System:
Press / to change the colour system
want to
store. Press
•youSound
System:
/ buttons to change the sound
to Auto,
SECAM,
PAL./ to change the colour system
tColour
System:
Press
system to DK, I, BG.
tSound
System:
Press / to change the sound system
to
Auto,
SECAM,
PAL.
•
Fine-Tune:
Press
/ to scan the current channel
to DK,
BG. Pressrange
tSound
System:
/ to
change and
the store
sound
within
aI, frequency
accurately
thesystem
result
tFine-Tune:
Press
/
to
scan
the
current
channel
manually.
to DK,
I, BG.
within
frequency
range
accurately
and to
store
theOff.
•
AFC:
SetaPress
the
automatic
Frequency
Control
On or
tFine-Tune:
/ to scan
the current
channel
result manually.
•within
Search:
Press / range
to start
search. and store the
a frequency
accurately
tAFC
result manually.
/ to start search.
DTVtSearch:
ManualPress
Tuning
Return
Return
OK
OK
Select
Select
EXIT
EXIT
Exit
Exit
tAFC
Press
OK button
to start
enter search.
the DTV Manual Tuning
DTVormanual
tSearch:
Press
/tuning
to
submenu.
Press or [OK] to enter the DTV Manual Tuning sub-menu.
Press
/ /buttons
to select
the channel,
DTV
manual
tuning
Press
to
select
the channel,
thenthen
presspress
[OK].OK
button
to
confirm
selection.
Press or [OK] to enter the DTV Manual Tuning sub-menu.
edit
PressProgramme
/ to select
the channel, then press [OK].
Press or [OK]
Programme
Editto enter the Programme Edit sub-menu,
Programme
where
youedit
have 5tofunctions
editing the
current
channel:
Press
or OK
button
enter thefor
Programme
Edit
submenu,
1. Press
thetoRED
button
to editing
delete the
current
channel.
Press
or [OK]
the for
Programme
sub-menu,
where
you
have
5 enter
functions
theEdit
current
channel.
2.
Press
the
GREEN
button
to
rename
it
(ATV
only).
where
youthe
have
5 functions
editingthe
the
current
channel:
1. Press
RED
buttonfor
to delete
current
channel.
3.
Press
the
YELLOW
button
and
the
/
keys
to
move it
1.2.Press
thethe
RED
button to
delete
current
channel.
Press
GREEN
button
to the
rename
it (ATV
mode
(ATV
2. Press
theonly).
GREEN button to rename it (ATV only).
only).
4.
Press
the
BLUE button
to
skip
it.the/ keys
3.3.Press
thethe
YELLOW
and
the
to move
Press
YELLOWbutton
button
and
/ buttons
to it
5.
Press
[FAV]
to
add
it
to
your
favourite
channels
list.
If it
(ATV
only).
move
it (ATV mode only).
already
is one of your
channels, pressing this
4.4.Press
thethe
BLUE
tofavourite
skip
Press
BLUEbutton
button
to it.
skip it.
button
will
it your
fromfavourite
the list. channels
5. Press
FAVagain
button
to delete
add it to
5. Press [FAV] to add it to your favourite channels list. If it
list. If is
itinformation
already
your
favourite
channel list,
press FAV
Signal
(DTV
only)channels,
already
one of in
your
favourite
pressing
this
button
again
will
remove
it
from
the
list.
or
[OK]
to
enter
this
sub-menu,
where
the
current
signal information is
Press
button again will delete it from the list.
displayed (channel, frequency, quality, strength).
Signal
Signalinformation
Information(DTV
(DTVonly)
mode only)
Press
or
[OK]
to
enter
this
wheresubmenu,
the current signal information is
Press or OK button to enter sub-menu,
Signal Information
displayed
frequency,
quality,
strength).
where the (channel,
current signal
information
is displayed
(channel, frequency, quality, strength).
34
Menu Options in TV Mode (Cont.)
n TV Mode (Cont.)
Picture Menu
Press MENU to display the main menu. Press
menu, press or OK button to enter.
/
33
buttons to select PICTURE in the main
n menu.
e main
nter.
$ !"#
cture Mode
e mode in
Mode
Mild Picture
Personal.
Press / buttons to select Picture Mode, then press OK button to enter the Picture
Modethe
submenu.
Press / control
buttons to change
the picture mode
in sequence:
Dynamic
eatedly on
remote
to
change
the
picture
Standard Mild Personal.
You can also press P.MODE repeatedly on the remote control to change the picture mode
directly.
Press OK button to confirm setting.
NOTE: Contrast, brightness, colour and sharpness value can be adjusted in “Personal Mode”.
our and sharpness value can only be adjusted in
Contrast
Press
Press
/
/
buttons to select Contrast, then press OK button to enter the Contrast submenu.
buttons to set the picture contrast intensity. Press OK button to confirm setting.
Brightness
Press / buttons to select Brightness, then press OK button to enter the Brightness
submenu. Press / buttons to set the picture brightness. Press OK button to confirm
setting.
ub-menu, then press / to set the picture contrast
Colour
Press
Press
/ buttons to select Colour, then press OK button to enter the Colour submenu.
/ buttons to set the picture colour intensity. Press OK button to confirm setting.
ub-menu, then press / to set the picture
35
Menu Options in TV Mode (Cont.)
Tint
Press / buttons to select Tine, then press OK button to enter the Tine submenu.
Press / buttons to set the picture tint (Only available for NTSC video signal). Press OK
button to confirm setting.
Sharpness
Press / buttons to select Sharpness, then press OK button to enter the Sharpness
submenu. Press / buttons to set the picture sharpness. Press OK button to confirm
setting.
Colour Temp
Press / buttons to select Colour Temp, then press OK button to enter the Colour Temp
submenu. Press / buttons to change the colour temperature in sequence: Cold
Normal Warm. Press OK button to confirm setting.
Noise Reduction
Press / buttons to select Noise Reduction, then press OK button to enter the Noise
Reduction submenu. Press / buttons to change the noise reduction in sequence: Off
Low Medium High Default. Press OK button to confirm setting.
V Mode (Cont.)
Sound Menu
Press MENU to display the main menu. Press
menu, press or OK button to enter.
enu.
n menu,
Mode
de in
/
buttons to select SOUND in the main
36
Menu Options in TV Mode (Cont.)
Options in
TV Mode (Cont.)
Sound Mode
Press / buttons to select Sound Mode, then press OK button to enter the Sound Mode
submenu. Press / buttons to change the sound mode in sequence: Standard Music
u
Moviemenu.
Sports Personal.
o display the main
You can also press S.MODE repeatedly on the remote control to change the sound mode
lect Sound in the main menu,
directly.
r [OK] to enter.Press OK button to confirm setting.
NOTE: Treble and bass values can only be individually adjusted in Personal Mode.
K] to enter theTreble
Sound/ Mode
Bass / Balance
Press
/
buttons to select Treble / Bass / Balance, then press OK button to enter submenu.
Press
/ in
buttons to set your desired value for treble or bass, and your desired balance for
hange the sound
mode
left and right
channel
speakers. Press OK button to confirm setting.
ndard MusictheMovie
Sports
Personal.
ress [S.MODE] repeatedly on the remote control to change the sound
Auto Volume
/ be
buttons
to selectadjusted
Auto Volume,
then press
OK button to enter submenu.
nd bass valuesPress
can only
individually
in Personal
mode.
Press / buttons to set automatic volume to On or Off. When Auto Volume is set to On, the
volume of the channel is automatically adjusted. Press OK button to confirm setting.
Balance
K] to enter theSPDIF
sub-menu,
Modethen press / to set your desired value
ss, or set your Press
desired/ balance
leftSPDIF
and Mode,
right channel
speakers.
buttonsfor
to the
select
then press
OK button to enter submenu.
Press / buttons to select the type of digital sound output from the COAXIAL connection
for connecting a sound system, Auto PCM
Off. Press OK button to confirm setting.
K] to enter the sub-menu, then set the automatic volume level to On
AD Switch (DTV mode only)
Press / buttons to select AD Switch, then press OK button to enter submenu.
The AD (Audio Dynamic) Switch automatically adjust volume levels for programmes that
the type of digital
from
the COAXIAL connection for
have sound
hearingoutput
impaired
data.
ound system. Press / buttons to set AD Switch to On or Off. If set On, press buttons to adjust desired AD
volume. Press OK button to confirm setting.
V only)
dynamic) switch automatically
e levels for programmes that have
ed data.
K] to enter the AD switch subess / to select On and adjust
e.
Menu Options in TV Mode (Cont.)
35
37
TV Mode (Cont.)
Time Menu
Press MENU to display the main menu. Press
press or OK button to enter.
/
buttons to select TIME in the main menu,
menu.
n menu,
e
he time
Clock (DTV mode only)
al source.Display the current system time.
NOTE: You cannot change the time manually in DTV mode, as the time comes directly from a
signal source.
Time Zone (DTV mode only)
Press / buttons to select Time Zone, then press OK button to enter submenu. Press
menu, then
press / / / to set the appropriate
buttons to set the appropriate time zone according to your region.
n.
Sleep Timer
/
Press / buttons to select Sleep Timer, then press OK button to enter submenu. You can
set the Sleep Timer On to switch off the TV automatically after a certain time. Press /
buttons to select Sleep Time option in sequence: Off, 10, 20, 30, 60, 90, 120, 180 and 240
minutes.
Auto Standby
Press / buttons to select Auto Standby, then press OK button to enter submenu. You can
set the Auto Standby On to turn TV into standby mode automatically after a certain time.
Press / buttons to select Auto Standby option in sequence: Off, 3hrs, 4hrs and 5hrs.
p Timer sub-menu, then press / to set the
dly on the remote control to change the sleep
38
Menu Options in TV Mode (Cont.)
OSD Timer
Press / buttons to select OSD Timer, then press OK button to enter submenu. You can
set your preferred duration for on-screen display message. Press / buttons to select OSD
Time option in sequence: 5, 10, 15, 20, 25 and 30 seconds.
Daylight Saving Time
Press
Press
/
/
buttons to select Daylight Saving Time, then press OK button to enter submenu.
buttons to set Daylight Saving Time to On or Off.
V Mode (Cont.)
Lock Menu
Press MENU to display the main menu. Press
press or OK button to enter.
/
buttons to select LOCK in the main menu,
enu.
menu,
ock on
s. To change
this
Lock System
Press / buttons to select Lock System, then press OK button to enter submenu.
Press / buttons to set Lock System to On or Off.
The Lock System allows you to turn the system lock On or Off. When this option is turned On,
you cannot manually search and adjust channels. To change this setting, you must enter a
password first, the default password is 0000.
u to set a new
word by entering
Press [MENU] to display the main menu.
Press / to select Lock in the main menu,
then press or [OK] to enter.
39
Lock system
This allows you to turn the system lock on
Menu Options in TV Mode (Cont.)
manually
search and adjust channels. To change this
Set Password
Press / buttons to select Set Password, then press OK
button to enter
submenu.
password
is 0000.
Use the number keys to enter password. You can change the
password
by entering the old password first, and re-enter
Set
password
the new password twice. Press OK button to confirm setting.
Press or [OK] to enter the sub-menu to set a new
password. You can change the password by entering
NOTE: If you forgot your password, you can input
the old and a new password and then re-entering it to
the master password 4711. This will override your
password and allow you to reset new password. This
master
password
not be changed.
If you forget
yourcan
password,
input: 4711. This is the
override code and will allow you access to reset your
password (the master code cannot be changed).
Block Programme (Channel)
Press
/
buttons to select Block Programme then press
Block
programme
(channel)
OK button
to enter submenu.
Block Programme allows you
Press
[OK] tocertain
enter the
BlockPress
Programme
to lock or
or unlock
channels.
GREEN sub-menu,
button
to lockyou
desired
and press
againtotocertain
unlock channels.
it.
where
canchannel,
add or release
a lock
To watch a locked channel, enter the correct password
To watch
a black programme,
the Lock
System
into
the dialogue
box whenenter
prompted.
The
initial
password.
The
default
password
is
0000,
or
enter
own
(default) password is 0000. Use it to enter theyour
system
password.
and set your own.
Press the GREEN button to lock the desired channel,
Parental Guide
press
it again to unlock it.
Press / buttons to select Parental Guide then press
OK button to enter submenu. Parental Guide allows you
Parental
guidance
(DTVbyonly)
to block certain
programs
its rating / classification
Press
/ orPress
[OK] to
thistosub-menu,
where
you
categories.
/ enter
buttons
set your desired
rating
/ classification
categories,
and press OKbased
button
confirm
can
block individual
programmes
ontotheir
rating.
setting. / to set the parental guidance level. You can
Press
Key Lockon the right.
pictured
Press / buttons to select Key Lock then press OK button
to enter submenu. Press / buttons to set Key Lock On or
Off. If Key Lock option is turned On, the buttons on side of
the TV will not function. You can only operate the TV using
the remote control.
P
C
40 you want to be locked.
source item
t input source
you switch
on the (Cont.)
TV main unit.
Menuwhen
Options
in TV Mode
t ATV channel
when you switch on the TV.
Hotel Mode
Press /value.
buttons to select Hotel Mode, then press OK button to enter submenu. Press
mum volume
/ buttons to set Hotel Mode On or Off. When Hotel Mode is turned On, you can set the
mode locks.
following values:
•
•
•
•
•
Source Lock: Set the input source item you want to lock.
Default Source: Set the default input source when you switch on the TV.
Default Prog: Set the default ATV channel when you switch on the TV.
Max Volume: Set the maximum volume value.
Clear Lock: Clear all Hotel Mode locks.
.
Setup Menu
Press MENU to display the main menu. Press
press or OK button to enter.
r
/
OK
buttons to select SETUP in the main menu,
n er.
re err
r
b-men
r
Auto
r
/
OSD Language (On-Screen Display Play)
ele ex
Press / buttons to select OSD Language, then press OK button to enter submenu.
Press / buttons to set your preferred OSD menu language. The default OSD language is
English. Press OK button to confirm setting.
A r
r
ex
TT Language (Teletext)
Press / s.buttons to select TT Language, then press OK button to enter submenu.
Press / buttons to set your preferred TT language.
NOTE: This function is not applicable in Australia, except for closed captions. (See page 21 for
details)
Hearing Impaired (DTV mode only)
Press / buttons to select Hearing Impaired, then press OK button to enter submenu.
Press / buttons to set Hearing Impaired option On or Off to display subtitles.
38
41
Menu Options
in TVinMode
(Cont.)
Menu Options
TV Mode
(Cont.)
PVR File System
PVR File system (DTV only)
Insert you USB Insert
deviceyour
(FAT32
only) into
theonly)
USBinto
USB format
device (FAT32
format
the
USB
port.
port. Press / buttons to select PVR File System, then
or [OK]
to enterYou
the sub-menu,
press OK buttonPress
to enter
submenu.
can check where
the USB
you
can
check
the
USB
device
connected
for
device connected for recording.
recording.
Press / to select “Check PVR File System”,
Once you are then
in the
PVR
File
submenu,
press
press
[OK]
toSystem
start checking.
This process
/ buttons will
to select
“Check
PVRAtFile
and
take a few
seconds.
the System
end of the
process,
the
word
“SUCCESS”
will
appear
after
press OK button to start the checking process. This
“Check
PVR File
System”At
and
theend
speed
process may take
a few
seconds.
the
ofwill
the
be shown on the menu as well. You can now
checking process,
the word “SUCCESS” will appear,
record and save the DTV programme.
speed will also be shown on the menu. You can now record and save the DTV
NOTE: We recommend using a hard disk with built-in power supply.
programmes.
NOTE: we recommend
Aspect ratiousing a hard disk with built-in power supply.
Press / or [OK] to enter the sub-menu, then press / to change the aspect ratio
Aspect Ratio to Auto, 4:3, 16:9, Zoom1, Zoom2, Just Scan. (Auto is the default setting.)
NOTE:
Scan
is panoramic
so black
edging to
may
appear
according to the
Press / buttons
toJust
select
Aspect
Radio, display,
then press
OK button
enter
submenu.
data
rate.
Auto
and
Just
Scan
may
be
not
available
in
some
sources.
Press / buttons to select your desired aspect ratio in sequence: Auto, 4:3, 16:9, Zoom1,
Zoom2 and Just Scan (Auto is the default setting). Press OK button to confirm setting.
Blue screen
NOTE: Just Scan
is panoramic display, so black edging may appear according to the data rate.
Press /
Auto and Just Scan may not be available in some sources.
a blue screen when there is no signal on the currently selected source.
Blue Screen First time installation
Press toorselect
[OK] to
enter
relevant
options
OSD
and channel
Press / buttons
Blue
Screen,
then
pressincluding
OK button
tolanguage
enter submenu.
tuning
(see
page
24
for
more
detail).
Press / buttons to set Blue Screen On or Off. If Blue Screen is set On, screen will turn blue
when there is no signal or currently selected sources. Press OK button to confirm setting.
Reset
Press or [OK] to enter the sub-menu, then press to select Yes to restore factory
First Time Installation
default settings.
Press / buttons to select First Time Installation, then press OK button to enter relevant
options including
OSD language
and channel tuning (see page 24 for more detail).
Software
update (USB)
Reset
Press or [OK] to select this setting for software updates that the manufacturer may
supply. Detailed information will be sent with the software for updating.
Press / buttons to select Reset, then press / buttons to select Yes or No to restore
factory settings. Press OK button to confirm setting.
NOTE: Reset will clear all settings and set TV back to default settings.
Software Update (USB)
Press / buttons to select Software Update(USB), then press OK button to update
software of your USB device. Software Update for your USB device depends on how often the
manufacture software support update.
42
Menu Options in PC Mode
Make sure you have your computer properly connected to the TV and turn on both PC
and TV. Press SOURCE button on your remote control and select PC from the input menu.
The available menu will be displayed on the screen. Most of the menus have already been
described in previous pages.
NOTE: The screen menu is specific to PC mode and will only appear if you have a computer
connected to the TV.
Screen Menu
Pressin
MENU
to display
the main menu. Press
u Options
PC
Mode
menu, press
or OK button to enter.
39
/
buttons to select SCREEN in the main
you have your computer properly
d to the TV and turned on.
URCE] on the TV remote control
PC from the input source menu.
ble menus will be displayed on
n. Most of the menus have already
ribed on the previous pages.
de and will only
appear
if you have a computer connected to the TV.
Auto
Adjust
Press / buttons to select Auto Adjust, then press OK button to start automatic
adjustment. This will generally adjust the picture’s location on the screen, clock and phase
the signal output from the PC you connected. Under certain circumstances,
NU] to display according
the main to
menu.
Auto
Adjust
may
not work.
happens,
youtocan
adjust the picture, clock and phase
to select Screen in the main menu,
thenIf this
press
or [OK]
enter.
manually.
menu
ust
H-Offset / V-Offset
[OK] to start automatic adjustment.
Press / buttons to select H-Offset / V-Offset, then press OK button to enter submenu.
enerally adjustPress
the picture’s
location
on the
clock
and phase
/ buttons
to adjust
thescreen,
horizontal
or vertical
position of the picture.
to the signal output from the PC you connected. Under certain
nces, auto adjustment
may not work. If this happens, you can adjust the
Size
clock and phase
manually.
Press
/ buttons to select Size, then press OK button to enter submenu. Press /
buttons to adjust display size.
or [OK] to enter
the sub-menu, then press / to adjust the horizontal or
Phase
osition of the picture.
Press / buttons to select Phase, then press OK button to enter submenu. Press /
buttons to adjust the phase of the picture.
Position
Reset then press / to adjust the display size.
or [OK] to enter
the sub-menu,
Press / buttons to select Position Reset, then press OK button to restore settings to
factory default.
NOTE:
You may need
to consult
for instructions how to
or [OK] to enter
the sub-menu,
then
press your
/ tocomputer’s
adjust theinstruction
phase of manual
the
enable video output on your computer.
eset
43
40
40
Media (USB) Mode
Mode
Media
Media (USB)
(USB) Mode
Plug in a USB device (with FAT32 format), then press SOURCE button to set the input source
Plug
in
Plug
in aa USB
USB device
device (with
(with FAT32
FAT32 format),
format), then
then press
press [SOURCE]
[SOURCE] to
to set
set the
the input
input
to Media.
source
to
Media.
Press to
/ Media.
buttons to select Media in the source menu, then press OK button to enter
source
Press
/
submenu.
Press / to
to select
select Media
Media in
in the
the source
source menu,
menu, then
then press
press [OK]
[OK] or
or to
to enter.
enter.
Press
/
/
buttons
to
select
submenu,
PHOTO,
MUSIC,
MOVIE
or
TEXT.
Press
OK
to confirm
Press /
selection.
This
This TV
TV supports
supports the
the following
following media
media formats:
formats:
This TV supports
the following
media formats:
Photo:
PNG
/
JPEG
/
BMP
Text:
TXT
Photo: PNG / JPEG / BMP
Text:
TXT
PHOTO:
PNG
/
JEPG
/
BMP
TEXT:
TXT
Music:
WMA
/
MP3
Movie:
AVI
Music: WMA / MP3
Movie: AVI // DAT
DAT // MP4
MP4 // MPG
MPG
MUSIC: WMA / MP3
MOVIE: AVI / DAT / MP4 / MPG
Media
-- Photo
Media
Photo
Media - PHOTO
Select Return (with the / buttons)
Press
/ to select
Photo,
then press
Press
selectto
Photo,
press
Press // to
buttons
selectthen
PHOTO,
then
[OK]
to
enter.
pressto
OKenter.
button to enter submenu.
[OK]
Select Return
(withtothe
buttons)
Press
/ buttons
select/ Return,
then
to
return
to
the
previous
menu,
or
to
return
to
the
previous
menu,
or
press OK button to return to the previous
select
menu.
select C
C to
to enter.
enter.
Press
Press //
Press
Press
[OK]
to
start
show.
To delete
file, press
theTo
Press
[OK]the
toselected
start aa slide
slide
show.
ToRED
/ / buttons to select the
file you want to view in the file selection
When
highlighting
the
you
menu. When
highlighting
the file you
When
highlighting
the option
option
you
select, the file information will appear
the right
and the
picture cancan
be
on
on the
the right
right and
and the
the picture
picture can be
be
previewed
in
the
centre.
Press
OK
button
previewed
in
the
centre.
previewed
in show.
the centre.
to start a slide
button, then select Yes or press OK
button,
select
or
press
[OK].
button tothen
confirm.
To Yes
show
function
button,
then
select
Yes
orthe
press
[OK].
To
show
the
function
panel
on
the
panel
on
the
bottom
of
the
screen,
press
To show the function panel on the
bottom
of
the
screen,
press
[DISPLAY],
DISPLAY
button
and
use
/
buttons
to
bottom of the screen, press [DISPLAY],
select desired/function.
Press OK
button
then
then press
press / to
to select
select the
the desired
desired
to confirm selection. Press EXIT button to
return to the
main[EXIT]
menu.toAlternatively,
use
selection.
Press
return
to
selection.
Press
[EXIT]
to
return
to
the corresponding
buttons on theuse
remote
the
main
menu.
Alternatively,
the
main
menu.the
Alternatively,
use the
the
control
to select
desired function.
corresponding
corresponding buttons
buttons on
on the
the remote
remote
control
to
select
the
desired
function.
control to select the desired function.
44
Media
(Cont.)
Media (USB)
(USB) Mode
Mode (Cont.)
Media (USB) Mode (Cont.)
41
41
Media - MUSIC
Media - Music
Media - Music
Press
buttons
select MUSIC,
then
Press // to
selecttoMusic,
then press
Press
/
to
select
Music,
then
press
press
OK
button
to
enter
submenu.
[OK] to enter.
[OK] to enter.
Press // / / buttons to select the
Press
Press
filelisten
you/want
to listen
in the file selection
to
to. When
highlighting
the
to
listen
to. When
highlighting
menu.
When
highlighting
the file the
you
selected,
theon
filethe
information
appear
will
appear
right andwill
the
song
on
the
right
and
music
will
be
played
will
appear
on
the
right
and
the
song
will be played automatically.
automatically.
will
be played automatically.
To show the function panel on the bottom of the screen, press [DISPLAY], then
To
show/ the function panel on the bottom of the screen, press [DISPLAY], then
press
To
show
function panel on the bottom of the screen, press DISPLAY button and use
press
/the
[EXIT]
to
return
to thethe
main
menu.
Alternatively,
use
the corresponding
buttons
on
/
buttons
to to
select
desired
function.
Press OKuse
to confirm
selection. Press
EXIT button
[EXIT]
to return
the
main
menu.
Alternatively,
the corresponding
buttons
on
the
remote
control
to
select
the
desired
function.
to return to the main menu. Alternatively, use the corresponding buttons on the remote
the remote control to select the desired function.
control to select the desired function.
42
42
Media
(USB) Mode (Cont.)
45
Media (USB) Mode (Cont.)
Media (USB) Mode (Cont.)
Media - MOVIE
Media - Movie
Media - Movie
Press
buttons
select MOVIE,
then [OK]
pressto
OKenter.
buttonPress
to enter
submenu.
Press // to
selecttoMovie,
then press
[DISPLAY]
to Press
showDISPLAY
the
button
to
the
panel
onthe
thescreen.
bottom
of the
screen.
The basicwithin
operations
within
Press
/ show
to select
Movie,
thenof
press
[OK]
to The
enter.
Press
[DISPLAY]
to show
function
panel
onfunction
the
bottom
basic
operations
thethe
movie
the
MOVIE
menu
are
the
same
as
the
MUSIC
menu
operation
instructions
in
the
previous
function
on the
basic
operations
within the movie
menu arepanel
the same
as bottom
for thoseofinthe
thescreen.
MusicThe
menu
(previous
page).
page.
menu are the same as for those in the Music menu (previous page).
Media- TEXT
- Text
Media
Media - Text
Press / to select Text, then press
Press
to
selecttoText,
then
press
Press
buttons
select
TEXT,
then
[OK] to//enter.
press to
OKenter.
button to enter submenu.
[OK]
Press /
Press
Press / / / buttons to select the
file you want tothe
view
in theyou
file selection
highlighting
option
select,
menu.
When
highlighting
the
you
highlighting the option youfile
select,
selected, the file information will appear
on the right and the file can be previewed
the
centre. Press [OK] to start viewing
in the centre. Press OK button to start
the
centre.
Press
[OK]
to start viewing
texttext
in full
screen.
viewing
in full
screen.
the text in full screen.
46
Specifications
MODEL
GVAFLED32
Panel System
32” (80cm) FHD LED Panel
Display Resolution
1920 x 1080
Television System
PAL
Aspect Ratio
16:9
Display Colours
16.7M Colours
Contrast
1200:1
Viewing Angle
170 (H) / 160 (V)
Backlight Life
50,000 hours
Pixel Pitch
0.36375 (H) x 0.36375 (V)
Response Time
6.5ms
HDMI Input
3
Speaker consumption
L/R 2x6W
Voltage
AC 100-240 ~ 50/60Hz
Rated Power consumption
60W
This manual is only for your reference, any change to the design and specification will not be
advised.
52
52
44
44 52 Wall
Mounting
Instructions
44Mounting
Wall
Instructions
Wall
Mounting
Instructions
Wall
Mounting
Instructions
Wall
Mounting
Instructions
Wall
Mounting
Instructions
Attaching
the base
Wall
Mounting
Instructions
Attaching
the base
Attaching Place
the
base
thebase
screen
face down on a protective
Attaching
the
Attaching
the
base
Attaching
the
base
Place
the
screen
face
on neck
a protective
Place the
screen
face
down
on
adown
protective
Attaching
thePlace
base
surface.
stand
the
of the
Place
thescreen
screen
facethe
down
on
aon
Place
the
face
down
onprotective
aprotective
protective
Place
the
screen
face
down
on
a
surface.
Place
the
stand
on
the
neck
of the
Place
the
screen
face
down
on
a
protective
surface.
Place
the
stand
on
the
neck
of
the
TVPlace
and tighten
the
in the
circled
area
surface.
the base
stand
onscrews
the neck
neck
of
the
surface.
Place
the
on
the
of
the
TV
and
insert
metal
disc
and
tighten
the
surface.
Place
the
stand
on
the
neck
of
the
surface.
Place
the
stand
on
the
neck
of
the
TV andTVtighten
the
screws
in the
circled
area
with
a screw
drive.
and
tighten
the screws
in the
circled
area
TV.TV
Insert
metal
and
tighten
the
screws
screws
indisc
the disc
circled
area
with
a
TV
and
insert
metal
disc
and
tighten
the
and
insert
metal
and
tighten
the
with awith
screw
drive.drive.
a screw
screw
drive.
in the
with
a screw
screws
incircled
thearea
circled
area
with
screws
in circled
the
area
with
a a drive.
screw screw
drive.drive.
Remove the Stand
Remove the Stand
To remove
the stand,
remove the screws in
Remove
the Stand
Remove
the Stand
To
remove
the
stand, remove the screws in the circled area and the neck will c
Remove
the
Stand
Remove
the
Stand
the
circled
area
and
neck will come off.
ToStand
remove
thethe
stand
Remove
the
To remove the stand, remove the screws in the circled area and the neck will c
.
To remove
the stand
To remove
the stand,
remove the screws in the circled area and the neck will c
.
To remove the stand
47
.
200 mm
200 mm
200 mm
Wall-mounting
the Device
Wall-mounting
the Device
Wall-mounting
the Device
Wall-mounting
the Device
Device
Wall-mounting
the
If
you
are
mounting
the device,
If you are mounting
the device,
please please
Wall-mounting
the Device
Ifare
are mounting
the
device,
please
mounting
the device,
please
cyou
for further
cyouare
for further
Wall-mounting
the
Device
If Ifyou
mounting
the
device,
please
consult a qualified installer for further instructions on
or
further
c
instructions
on
bracket
support
and
wall
c
or
further
instructions
on
bracket
support
and
wall
If you
are mounting
the device,
please
bracket
support and
wall support.
instructions
on
bracket
support
and
wall
support.
instructions
bracket
support and wall
support. theon
Ifcyou are mounting
device,
please
for further
400 mm
400 mm
support.
support.
cinstructions
ormm
further
on bracket support
and
wall
Mount
Specification:
400
x
200
MounMoun ation: 400
mm400
x 200
mm
ation:
mm
x 200 mm
200 mm 200 mm
instructions
onscrew
bracket
support
and
wall
support.
mm
using
size
M6
(not
supplied).
using
screw
size
M6
(not
supplied).
Length
tion:
200
mm
x
200
mm
Moun
400 mm
200 mm 200 mm
using screw sizetion:
M6 (not
supplied).
Length
Moun
200
mm
x
200
mm
support.
Length
of screw
should
not
exceed
of screw
should
not
exceed
10
mm.
using
screw
size
M6
(not
supplied).
Length
of screw
should
not (not
exceed
10 mm.Length
using
screw
sizemm
M6
supplied).
Moun
ation:
400
x10
200
mm
10ofPlease
mm.
note:
The
10
mm
length
of
screw
screw
should
not
exceed
mm.
Thenot
10 mm
length
of screw
200 mm
ofPlease
screwnote:
should
exceed
10 mm.
using
screw
size
M6
(not
supplied).
Length
refers
to
how
deep
the
screw
can
go
inside
tion:
200
mm
x
200
mm
Moun
Please
note:
The
10
mm
length
of
screw
Please refers
note: The
10 mm
length
of screw go inside
200 mm
to how
deep
the screw
Please note:
The
10 mm
lengthcan
of screw
theshould
mounting
holes.
of screw
not
exceed
10 mm.
refers
toto
how
deep
the
screw
can
go
using
screw
size
M6
(not
supplied).
Length
refers
how
deep
screw
can
go
inside
the mounting
holes.
refers
to how deep
the screw can go inside
note:
10holes.
mm
length
of screw
the
mounting
inside
theThe
mounting
holes.
ofPlease
screw
should
not
exceed
10 mm.
the
mounting
holes.
When
you
are
buying
screws,
you
should
add the original 10mm to the thickness of your
refers note:
to how
deep
the
screw
can
go
inside
Please
The
10
mm
length
ofscrews,
screw
When
you
are
buying
you should add the original 10mm to the thickness of your
mounting
plate
in
order
to
get
the
total
screw
length.
When youholes.
are buying screws, you should add the
original 10mm to the thickness of your
the mounting
When
you
are buying
screws,
you
should
refers
to how
deep
the
screw
canscrews,
go
mounting
plate
in order
to inside
get
theshould
total screw
length.
When
you
are
buying
you
add the
original 10mm to the thickness of your
mounting
plate
in
order
to
get
the
total screw
length.
add
the
original
10
mm
to
the
thickness
of
your
mounting
plate in order to get the total
the mounting
holes.
mounting plate in order to get the total screw length.
When
youlength.
are buying screws, you should add the original 10mm to the thickness of your
screw
mounting
plate
in order
to getyou
theshould
total screw
length.
When
you are
buying
screws,
add the
original 10mm to the thickness of your
mounting plate in order to get the total screw length.
-Reinstall your PC video card if the signal source is from your computer.
48
Maintaining your TV
Care
andyour
Maintenance
If you clean
TV carefully and regularly, it helps your TV to last longer.
Ma
you turn the power off and unplug the power cord on your TV before you begin
clean it. your TV
Maintaining
If you clean your TV carefully and regularly, it helps your TV to last longer. Make sure you turn
the power off and unplug the power cord on your TV before you begin to clean it.
Cleaning the screen
Cleaning the screen
1 . Here's a great way to keep the dust off your screen. Wet a soft cloth in a mi
1. lukewarm
Here’s a great way
to keep
off your
screen.ofWet
a soft cloth
in a mixture
of
water
andthe
a dust
small
amount
fabric
softener
or washing-up
liquid.
lukewarm
and
a small
amount
fabricthen
softener
or washing-up
Wring the
the
clothwater
until
it's
almost
dryofand
use
it to wipeliquid.
the screen.
cloth until it’s almost dry and then use it to wipe the screen.
2 . Make sure there is no excess water on your TV when you have finished clea
2.
Make sure there is no excess water on your TV when you have finished cleaning it.
Cleaning
the parts
plastic
parts
Cleaning
the plastic
of your
TV
of your TV
Wipe the plastic parts of your TV with a soft, dry, lint-free cloth. Do not use a wet cloth.
Wipe the plastic parts of your TV with a soft, dry, lint-free cloth. Do not use a w
If you are going to be away for a while
If you are going to be away for a while
If you are not going to use your TV for a while (such as when you go on holiday),
you should unplug the power cord from the socket and disconnect your aerial to
If you
are
going
to use
your
for a or
while
protect
your
TV not
against
possible
damage
fromTV
lightning
power(such
surges. as when you go o
holiday), you should unplug the power cord from the socket and disco
your aerial to protect your TV against possible damage from lightning
power surges.
36
49
Responsible Disposal
At the end of its working life, do not throw this appliance out with your household
rubbish. Electrical and electronic products contain substances that can have a detrimental
effect on the environment and human health if disposed of inappropriately. Observe any
local regulations regarding the disposal of electrical consumer goods and dispose of it
appropriately for recycling. Contact your local authorities for advice on recycling facilities in
your area.
50
FAQs
Problem
Action
No picture, no sound
1.
2.
3.
Normal Picture, but no sound 1.
2.
3.
Remote control does not work
1.
2.
3.
4.
TV turned off suddenly
1.
2.
3.
Picture appear slowly after
TV switched on
Check that you have connected the TV power
cord properly and switched the wall socket on.
Check that you have turned on the POWER
button on your TV.
Check the picture contrast and brightness
setting.
Check that your TV is not muted or has the
volume down.
Switch the channel, the problem may be with
the channel you’re on, not the TV.
Check that your audio cable input has been
plugged in properly, if you are using an external
amplifier.
Check to see if there is any object between your
TV (such as a piece of furniture) that could block
the remote control from connecting with the
sensor on your TV.
Have you put the batteries into the remote
control the right way? ( + to + and - to -)
Check that the TV is not positioned in bright
sunlight.
Try fitting new batteries if none of the above
work.
Check that you have not set the sleep timer.
Check that you have not set the timer to control
the socket which has your TV power cord on.
Check that you have not set auto standby with the
broadcast signal source which is connected to your
TV.
This is normal. The image takes a few seconds to
appear after you have switched the TV on. Please
contact your service centre if picture has not
appeared after five minutes.
51
FAQs
Problem
Action
No Colour, poor quality colour,
poor quality image
1.
2.
3.
4.
5.
6.
Horizontal and Vertical lines on
the screen in PC mode
1.
2.
Poor reception
1.
2.
3.
Change the colour setting on the PICTURE MENU.
Keep a distance between your TV and any VCR you
may be using
Try watching another channel. The problem may
be with the channel you’re watching.
Are the video cables installed properly?
Change the setting of picture brightness on
PICTURE MENU.
Reinstall your PC video card if the signal source is
from your computer.
Check if any signal interference activities is going
on nearby, such as an electrical appliance or power
tool is in operation.
Turn on the auto configure or change the
horizontal or vertical frequency position.
The TV channel you’re watching may be having
problems. Change to another channel and see if
the same is happening.
TV broadcasting signal is weak or has been
interrupted.
Check whether signal sources have any possible
interference.
Lines and streaks on the picture
Check if there is any damage to the aerial on the roof, try
to change the direction of the aerial to receive a better
signal.
TV Speak has no sound
Check the sound balance setting on SOUND MENU.
The signal is out of range
1.
2.
3.
Change the resolution,horizontal or vertical
frequency of your source (PC etc.).
Check whether the signal cable is connected from
the PC to your TV properly.
Check the signal input source is connected
properly.