Gamber-Johnson Panasonic Toughbook F1/N1 Rugged Handheld Cradle, No Power Port Installation Guide

INSTALLATION INSTRUCTIONS
Product
7160-0901
PANASONIC FZ-F1/N1 CRADLE
Revision
Rev. C
Form
INST-754
Printing Spec: PS-004
This instruction sheet is for the Panasonic FZ-F1/N1 cradle only. For instructions on
features, set-up, and operation of the computer, please refer to the manual
provided by Panasonic with the computer.
This docking station is designed to be used with a variety of Gamber-Johnson
mounting systems. Installation instructions for other Gamber-Johnson products
are provided with each individual product.
This instruction sheet is for the following products:
Item No. 7160-0901-00(-P)(-E) No RF
Product Mounting Disclaimer
Gamber-Johnson is not liable under any theory of contract or tort law for any loss, damage, personal injury, special, incidental or consequential damages for personal injury or other damage
of any nature arising directly or indirectly as a result of the improper installation or use of its products in vehicle or any other application. In order to safely install and use Gamber-Johnson
products full consideration of vehicle occupants, vehicle systems (i.e., the location of fuel lines, brakes lines, electrical, drive train or other systems), air-bags and other safety equipment is
required. Gamber-Johnson specifically disclaims any responsibility for the improper use or installation of its products not consistent with the original vehicle manufactures specifications
and recommendations, Gamber-Johnson product instruction sheets, or workmanship standards as endorsed through the Gamber-Johnson Certified Installer Program.
If you need assistance or have questions, call Gamber-Johnson at 1-800-456-6868
1/3
PANASONIC F1/N1 CRADLE FEATURE IDENTIFICATION
RELEASE BUTTONS 2X
Latches 2X
AMP Mounting Pattern
38mm x 30mm
Cable Tie Slots
2/3
DOCKING AND UNDOCKING THE COMPUTER
3/ 3