JVC LPT0342-002B VCR User manual
Add to My manuals2 Pages
JVC LPT0342-002B VCR combines ease of use with a wide range of features, enabling you to record and watch your favorite TV programs with ease.
This versatile VCR allows you to control playback with functions like Fast Forward, Rewind, and Pause. You can also use the VCR to make recordings, with both basic and advanced recording options available. Additionally, the VCR has a built-in clock and tuner, allowing you to easily set the time and tune into your desired channels.
Other features of the JVC LPT0342-002B include the ability to connect to a cable box or satellite receiver, the option to use an RF or AV connection, and the ability to connect to a component stereo audio system for enhanced sound quality.
advertisement
4
WATCH A RECORDED PROGRAM
* You can use both the buttons on the Remote and on the VCR.
1 Load a cassette with the label facing out and the window facing up.
2 Press REW or FF to find program start point.
3 Press PLAY to start playback.
To stop play, press STOP (Remote) or STOP/EJECT (VCR)
To eject the cassette, press STOP/EJECT (VCR) after stopping play.
5
RECORD A PROGRAM
a–BASIC RECORDING
* You can use both the buttons on the Remote and on the VCR.
1 Load a cassette as above.
2 Select the recording channel.
Remote: Press CH + /– or press the appropriate Number keys.
VCR: Press CH 5∞ .
3 Press SP/EP to set the recording speed.
4 Start recording.
Remote: Press REC and PLAY together.
VCR: Press REC .
To stop recording temporarily, press PAUSE . To resume recording, press PLAY .
To stop play, press STOP (Remote) or STOP/EJECT (VCR).
To eject the cassette, press STOP/EJECT (VCR) after stopping recording.
b–INSTANT TIMER RECORDING
* You can perform ITR only using the button on the VCR.
1 Press REC to start recording.
2 Press REC to engage ITR. “0:30” appears on the front panel display.
3 To extend duration in increments of 30 minutes, press REC as many times as necessary.
SP
VCR
POWER
POWER
VIDEO (MONO)L—AUDIO—R
MENU
OK
CH
䊱䊲
SP EP
VCR
FF (Fast-Forward)
REW (Rewind) PLAY
PLAY
REW FF
CH
SP/EP
REC STOP/EJECT PAUSE
TV/VCR
PLAY
REW (Rewind)
REC
STOP
TV
CABLE/
DBS
MBR SET
A/B
POWER
TV/VCR A. MONITOR DISPLAY
1
4
7
C. RESET
CANCEL
2
5
DAILY(M-F)
8
AUX
0
3
6
WEEKLY
9
2
TIMER 4
START STOP DATE CH
1 PROG
EXPRESS PROGRAMMING
PROG
CHECK
SP/EP SKIP SEARCH
PLAY
REW
FF
STOP PAUSE
REC
MENU
TV CH +
ENTER/O
SD
3
OK
T
V
V
O
L
–
SHUTTLE
PLUS
TV CH –
TV
V
O
L
+
SP/EP REC PAUSE
STOP/EJECT
POWER
Number
CH
+/–
SP/EP
FF (Fast-Forward)
PAUSE
Dear Customer,
Thank you for purchasing this JVC Video Cassette
Recorder.
QUICK ST
AR
T*
MONO/Hi-Fi/SUPER VHS
VIDEO CASSETTE RECORDERS
* Please refer to the HR-VP680U’s instruction manual for more detailed information.
A GUIDE TO EASY SET UP AND USE
The Path To
Enjoyment
Starts Here.
SET CLOCK
AND
TUNER
CHECK
PACKAGE
CONTENTS
PLAY BACK
A
TAPE
SITUATE AND
CONNECT
VCR
RECORD
A
PROGRAM
MAKE SURE THAT YOUR PACKAGE
CONTAINS:
VIDEO CASSETTE
RECORDER
POWER
VIDEO (MONO)L—AUDIO—R
MENU
OK
SP EP
VCR
PLAY
REW FF
CH
SP/EP
REC STOP/EJECT PAUSE
RF CABLE (F-TYPE)
“AA” BATTERY x 2
INFRARED
REMOTE
CONTROL
UNIT
1
4
7
2
5
8
0
3
6
9
2
4
1
3
MULTI BRAND
REMOTE CONTROL UNIT
U
Printed in Malaysia
1199 IYV * MW * PJ
COPYRIGHT © 1999 VICTOR COMPANY OF JAPAN, LTD.
LPT0342-002B
SITUATE AND CONNECT YOUR
NEW VCR
a–BASIC ANTENNA/CABLE CONNECTION
1 Place the VCR on a stable, horizontal surface.
2 Disconnect your antenna or cable line from your TV.
3 Connect your antenna to your VCR.
4 Connect your VCR to your TV.
5 After completing the basic connections:
● If you’re using a Cable Box, . . .
. . . go to 2b (CATV CONVERTER
CONNECTION) .
● If you’re using an AV connection, . . .
. . . go to 2c (AUDIO/VIDEO
CONNECTIONS).
● If you’re using an RF connection only, . . .
. . . go directly to 3 (PLUG & PLAY).
RF CONNECTION
COMBINED VHF/UHF
Back of VCR (example only)
ANT. IN
RF OUT
Back of TV (example only)
VHF/UHF
SEPARATE VHF/UHF
b–CATV CONVERTER CONNECTION
OUT IN
CATV Input
Cable
Box
To TV
TV
From
Cable
Box
ANT. IN
RF OUT
VCR
With this connection you can view/record any cable channel including scrambled channels to which you have subscribed.
To watch TV with this type of connection
1 Press TV/VCR on the Remote so that the VCR mode indicator lights on the front display panel.
2 Tune TV to VCR output channel
(3, 4 or AV mode).
3 Tune VCR to Cable Box output channel.
4 Select desired channel on Cable Box.
•You can only view the channel you are recording.
TV
VCR
To TV
OUT
CATV Input
ANT. IN
RF OUT
From VCR
IN
Cable
Box
With this connection, you can view one scrambled cable channel while recording another unscrambled channel.
To watch TV with this type of connection
1 Press CH 5∞ (+/–) or Number keys to select desired channel for recording.
2 Press TV/VCR so that the VCR mode indicator goes off from the front display panel.
3 Tune TV to Cable Box output channel.
4 Select desired channel on Cable Box.
• You cannot record scrambled channels.
• To play back a tape, you must tune the
Cable Box to the VCR output channel.
VHF ONLY
UHF
VHF
UHF ONLY
CABLE TV LINE
VHF
UHF
Note:
Exact connector positions and names may differ.
●
CONNECTORS WHICH ARE OR MAY BE REQUIRED:
䡲
RF Cable
䡲
300-75 ohm Matching
Transformer
䡲
VHF/UHF Antenna Mixer
䡲
Antenna Splitter
䡲
Antenna Splitter
c–AUDIO/VIDEO CONNECTIONS
AV connection methods differ from one type of VCR to another. First, for any TV and VCR, connect your VCR to your TV using RF connection. Then make AV connections following one of the methods illustrated here.
After making the connections, go to 3 (PLUG
& PLAY) .
Hi-Fi VHS VCR 佡 AV STEREO TV
VIDEO OUT
L
AUDIO OUT
R
MONAURAL VHS VCR 佡 AV TV
VIDEO OUT
AUDIO OUT
VIDEO IN
AUDIO IN
VIDEO IN
L
AUDIO IN
R
SUPER VHS VCR 佡 AV STEREO TV WITH S-VIDEO
INPUT TERMINALS
S-VIDEO OUT
VIDEO OUT
L
AUDIO OUT
R
S-VIDEO IN
VIDEO IN
L
AUDIO IN
R
TV
To Listen To VCR Sound Through A
Component Stereo Audio System,
Connect As Shown
VCR
VIDEO OUT
L
AUDIO OUT
R
Monaural deck owners:
Connect to VCR's AUDIO
OUT
AMP
SET YOUR VCR'S CLOCK AND
TUNER
PLUG & PLAY
The VCR’s clock and tuner channels are set automatically when the VCR is plugged into the AC outlet.
(
If you use a cable box, Plug & Play will not function; set the clock and tuner channels separately.
墌
pg.10 – 14 of the HR-VP680U’s instruction manual)
1 4
Plug the VCR into the
AC outlet.
2
During Auto Channel Set, the channel numbers are displayed as they are scanned and set.
Receivable channels are automatically stored in memory in the order of their frequencies, and non-receivable channels are skipped.
Do not press any buttons on the VCR or on the
Remote during Auto Setup.
5
3
When setting is complete, the VCR displays the current clock time. You can now use your
VCR.
“AUTO” blinks while the VCR automatically sets the clock using information provided by the local PBS channel.
NOTES:
● 5 procedure (refer to page 11 or 12 of the HR-VP680U’s instruction manual). Auto Channel Set has already taken place, and is not affected.
● There are some PBS channels that do not transmit clock setting data. If your antenna cable is properly connected and “– – : – –” is displayed, perform the Manual Clock Set procedure (refer to page 12 of the HR-VP680U’s instruction manual). Auto channel setting has not yet taken place, so perform the Auto Channel Set procedure (refer to page 13 of the HR-VP680U’s instruction manual).
advertisement
Related manuals
advertisement