advertisement
MX5800SA
First connect ...
12nc: 3139 115 23411
IMPORTANT!
Attach the front speakers to the subwoofer stands and the rear (surround) speakers to the mini speaker stands before making the connections to the DVD system. Refer to owner’s manual for detailed set up instructions.
Helpful Hints
You only need to make one video connection to your TV in order to view the DVD playback.
1
2
3
Use this video cable(s)
If your TV has this video input jack(s)
VIDEO
IN
If your TV has only a single Antenna In
ANTENNA IN jack , you will need an accessory RF modulator. The RF modulator converts the video from the
DVD system so it can play through the TV’s Antenna connector. Refer to your owner’s manual for proper connection.
not supplied
Component Video
S-VIDEO
IN
P-SCAN
ON OFF
Do not switch the P-SCAN to ‘ON’ position , unless you have connected the DVD system to a Progressive Scan TV using the Component (Y Pb Pr) video jacks.
Rear of TV
(example only)
VIDEO
OUT IN
Pr/Cr Pb/Cb Y
COMPONENT
VIDEO IN
AUDIO
S-VIDEO
IN
AUDIO
L
R
P r/Cr P b/Cb Y
Front Speaker and
Subwoofer Stand
(Right)
Rear Speaker
(Surround Right)
MW Antenna
FM Antenna
C
SL
SR
L
R
L
MW
R
DIGITAL
OUT
L
AUX
IN
AUDIO
FM ANTENNA
LINE
OUT
VIDEO
OUT
CVBS
Pr
Pb
DIGITAL
IN
R
S-VIDEO
Y
P-SCAN
ON OFF
Front Speaker and
Subwoofer Stand
(Left)
VOLTAGE
SELECTOR
~ AC MAINS
110V
127V
220V
240V
Centre Speaker
Rear Speaker
(Surround Left)
1
PUSH
OUT 2
PUSH
IN
Connecting Speaker Cable
... then play
(see next page)
SUPER VIDEO
AV IN
3
OPEN•CLOSE
DISC 1
DISC 1
DISC 2
DISC 3
DISC 4
DISC 5
DISC 2 DISC 3 DISC 4 DISC 5
5 DISC CHANGER
STANDBY- ON iR SENSOR
LE
FT
CENTRE
DISC
DVD
RIG
H T
SU
R-L
SUB
SU
R-
R
PLAY• PAUSE STOP SEATING
SOURCE
SEARCH
SURROUND
DVD VIDEO DIGITAL SURROUND SYSTEM
VOLUME
TREBLE
PROG TUNING CLOCK•TIMER
BASS
MIC LEVEL MIC
1
4
5
TV/AV
DISC/
MEDIA TUNER AUX/DI
1
4
7
SURR.
2
5
8
0
VOL
3
6
9
SOUND
SYSTEM MENU DISC MENU
SEATING
PREV
STOP
NEXT
OK
PLAY/PAUSE
ZOOM
DISC SKIP REPEAT REPEAT
A-B
PROGRAM
VOICE MUTE
DIM SLEEP SUB TV VOL
Make sure your DVD system and
TV are connected and turned on!
4 CHANNEL
3
2
Playing a disc
1
Press DISC / MEDIA on the remote control.
You can also adjust the SOURCE button on the front panel until “DISC X” appears on the display panel.
2
Turn on the TV and select the correct Video In mode.
You should see the blue Philips DVD background screen on the TV (if no disc in the DVD system).
3
Press OPEN • CLOSE
0 on the front of the DVD system and load a disc, then press the corresponding OPEN • CLOSE
0 again to close the disc tray .
Make sure the disc label is facing up. For double-sided discs, load the side you want to play face up.
4
Playback will start automatically.
If a disc menu appears, use 3 4 1 2 buttons on the remote to make the necessary selection, then press OK to confirm. Or, use the numeric keypad on the remote to select features. Follow the instructions given in the disc menu.
5
To stop playback, press STOP Ç .
Region Codes
DVDs must be labeled for ALL regions or Region 4, in order to play on this DVD system.
ALL 4
No picture!!
Check the AV (Audio / Video) mode on your TV.
* Usually this channel is between the lowest and highest channels and may be called FRONT, A/V IN, or
VIDEO.
* Or, you may go to channel 1 on your TV, then press the Channel down button repeatedly until you see the Video In channel.
* Or, your TV remote control may have a button or switch that chooses different video modes.
* See your TV manual for more details.
Detailed playback features and additional functions are described in the accompanying owner’s manual.
advertisement
Related manuals
advertisement