Webcam
User Manual
Features
( unit: mm)
Setting up your webcam
1. Place your webcam
Designed for the way you like to make a video call, place the webcam where you want it—on the monitor or the desktop.
Mount the webcam, making sure the foot on the clip base is fl ush with the back of your monitor.
USB
2
3
3
1
For placement on a monitor
Grasp the webcam as shown and open clip base with your other hand.
2. Connect your webcam
Plug your webcam into USB interface of
PC or TV STB. Wait for about 1 minute, webcam will install automatically.
Getting start with video calling
To take advantage of video calling, both you and the person you call must install video-calling application such as Skype TM ,
Yahoo! @Messenger, Windows Live@
Messenger or Gmail. As well as a USB camera and video calling application, both callers need;
A computer with speaker (or a headset) and a microphone (your webcam has built-in microphone);
A broadband Internet connection (e.g.,
DSL, T1, or cable);
Please check your preferred video calling application requirements. (Requirements may vary between different applications but usually a minimum of 2Mbps upload speed is required);
Q&A:
Q:How do I know if my camera is recognized
by the operating system?
A:Connect the camera in any USB2.0/3.0
port. Once the camera is connected, it
takes few more moments before the
camera is recognized. To ensure the
camera has installed correctly, check the
following:
UnderControl Panel>System and Security
>System>Device Manager.
Q:How do I know if my video calling
application is using my webcam?
A:All video application have an option
setting to review the audio and video
device.
Using the video application review the
followings:
The Audio selection to ensure the USB2.0
camera Microphone is selected.
If not change the selection to the USB2.0
camera.
The Video selection to ensure the USB2.0
camera is selected.
If not change the selection to the USB2.0
camera.
Q:How to judge USB webcam has already
be installed well on your computer?
A:
1. For Windows computer: Please go to
“Computer Management”— “Device
Manager”— “Cameras”.
See picture below. You can check if your computer recognizes USB webcam well.
2. For MAC: Please go to “Applications”—
“Photo Booth”.
See picture below.
You can check if your computer recognizes
USB webcam well.
Q:Why it does not work on Skype,
Facebook?
A:Normally software like Skype, Facebook use the integrated camera by default.
If you want to use USB webcam, you need go to video settings on software to select video resource.
Take Skype for example:
You need go to “Settings” on Skype—
“Audio&Video” to select USB camera as the video resource. See picture below.
