Trail Camera E2
User Manual
CONGRATULATIONS!
You are invited to Activate Your
LIFETIME WARRANTY
NOW AND GET A FREE GIFT
Just register your product online at vikeri.tech/warranty or scan QR Code
Content
Few Words From .......................................1
Product Introduction
Structure
..................................1
...................................................1
Components
Parameter
.............................................3
..................................................3
Function .....................................................4
Operation ...................................................9
Installation ................................................12
QA ...........................................................15
Precaution ...............................................15
Warranty ..................................................16
Contact Us ................................................16
Few Words From VIKERI
First of all, thank you for choosing . We are grateful for your trust in our products.
VIKERI has been studied cameras for decades. We have continuously designed
several models of trail camera for different needs based on our research. We
engage to provide the right product to the right customer.
VIKERI believes in Connection. We would like to build a little lovely community
where we could connect with each other and share our lives, our emotions, our
experience, our joy, and our sadness. Thank you for joining us.
welcome to VIKERI.
To be continued...
Product Introduction
E2 Trail Camera is an advanced model for daily use. If you are interested
in wildlife monitoring or you would like to see who are the secret visitors in your
garden, E2 Trail Camera is the perfect choice for you.
1. Structure
2
1
3
14 13
4
5
6
7
8
9
15
10 11 12
1.Lens
2.Infrared LEDs
3.PIR motion sensor
4.LCD screen
5.Menu button
6.Replay button
7.Navigation buttons
8.Shot button
9.OK button
10.TF card slot
11.USB slot
12.Operating mode switch
13.Fixation port
14.6V 1.5A Power supply port
15.Baterry slots
Key Function
MENU Press to open or close the menu
REPLAY Press to preview photos and videos
on LCD screen
Up Navigation Up (in Menu mode); View
previous photo/video (in Playback
mode); Switch to Video (in Setup mode)
Down Navigation Down (in Menu mode); View
next photo/video (in Playback mode);
Switch to Photo (in Setup mode)
Left Navigation Left (in Menu mode)
Right Navigation Right (in Menu mode)
SHOT Press to take picture/record video
(in Setup mode)
OK Start/Stop playing video file (Playback
mode); Confirm/Enter (in Menu mode)
2. Components
Micro USB Cable
Fixation Kit
Installation Belt
3. Parameter
Photo Resolution
Video Resolution
Detection Angle
Detection Distance
Fill Light LED Wavelength
Fill Light LED Quantity
Trigger Time
Waterproof Level
16MP/12MP/8MP/5MP
1080P/720P/D1/VGA
Up to 120 °
80ft (day), 65ft (night)
940nm (No Glow)
48 pcs
0.2s - 0.5s
IP66
Working Temperature
Memory Card Type
Power Supply Type
Battery Type
Working Voltage
External Power Supply
Standby Time
Photo Format
- 4°F - 160°F
Up to 32G TF Card (Class
10)
Battery/External
AA Battery
6V
DC 6V
Up to 6 Months
JPEG
4. Function
Mode
You could choose the working mode of E2
Photos
(default)
Videos
Photos &
Videos
Photo
Resolution
You can choose different photo resolution
16MP
12MP
8MP
5MP (default)
Photo Series
You can set the photo quantity when the camera is activated
Video
Resolution
1 photo
(default)
2 photos in series
You can choose different video resolution
3 photos in series
1920*1080P
1280*720P
(default)
720*480P
640*480P
TL Video(1) You can choose the resolution of
2592*1944P
2048*1536P
Resolution time lapse video
(default)
Video
Length
Audio
Recording
10 seconds
(default)
You can adjust the video length 3 seconds min.
10 minutes
You can decide if you want the camera to record sounds max.
On (default)
Off
Shot Lag
30 seconds
The time interval between each
2 seconds min. trigger (2)
(default)
60 minutes max.
Near You can choose the IR distance.
IR Distance
Further you choose, further the camera could detect, but the battery runs faster
Middle
(default)
Far
Sensitivity
You can adjust the sensitivity of
Motion
Sensors the motion detection sensor.
Low
Middle
(default)
High
Target
Recording
You can set the camera to record
Time(3)
Time
Lapse(4) between a certain period
Set up time lapse mode and the length of the lapse.
On (to set the period)
Off (default)
Normal
TL video
Off (default)
Language To set different language
English
(defalut),
Deutsch,
Dansk, Suomi,
Svenska,
Español,
Français,
Italiano,
Nederlands,
Portugués,
简体中文 ,
繁體中文 ,
日本語
Endless
Capture
If Endless Capture mode is on, the camera won’t stop recording when the memory card is full but will delete the oldest videos or photos to keep recording continuously
On
Off (default)
Time &
Date
Photo
Stamp
To set time and date. You can also choose the time format
(24h or 12h) and choose the
Set Time &
Date
Time Format date format (dd/mm/yyyy, yyyy/mm/dd or mm/dd/yyyy)
To choose if there will be time and date on the photo.
Date Format
Time & Date
(default)
Date
Off
Password Set up password to secure your
Protection camera
Beep Sound
Turn on or turn off the operation sound
Format
Memory
Card
Serial NO
Reset
Settings
Decision with caution! You will lose all of the data in the memory card if you decide to format it
To set up the serial number of the camera(5)
Reset all the settings to the original settings
On
Off (default)
On (default)
Off
Yes
No (default)
On
Off (default)
Yes
No (default)
Version Version of the system
30350.86
(default)
(1) TL Video: Time lapse video. Camera will first of all, take photos between certain period (set up in “Target Recording Time” and “Time Lapse”), then the camera will generate a video with these photos. This function usually used to record flower bloom.
(2) For example, we set the 1 minute video length and 30 seconds shot lag. When the camera detect an animal, it will start to record a 1-minute video. However, the camera will not detect continuously. When the video is done, the camera will not detect immediately. It will detect again 30 seconds after the video in order to save the battery.
(3) In order to use the “Target Recording Time” function, please make sure that you have already turn off the “Time Lapse” function and set up the length of the lapse between each photo.
(4) If you turn on the “Time Lapse” and turn off the “Target Recording Time”, the camera will take photos until the memory card is full.
(5) If you use several cameras at the same time and you want to recognize which camera took which photos and videos, set up a serial number could help you. The serial number will show on the bottom right of the photos or videos.
Operation
1. Getting Started
As the Trail Camera doesn't have built-in memory,a Micro SD memory card must be inserted into the camera before using.
1.1.Open the camera by unlocking two side locks.
1.2.Open the battery compartment.
1.3.Place 4 or 8 AA 1.5V type alkaline batteries into slots.NOTE:Must be alkaline.If you have only 4 AA alkaline batteries,and make sure to place them all in the upper or lower half of the battery compartment.
1.4.Insert Micro SD memory card.
Please note:
In TEST mode you can work out the best exposure angle and range of the motion sensor.First put the operating mode switch to TEST,then align the camera as follows:
Ÿ TF high-speed card (Micro SD memory card) of Class 10 is required for this
camera.
Ÿ This camera is compatible for using Micro SD (TF) cards with a capacity up to
32GB.
Ÿ Please format your Micro SD (TF) card before the first use.
Ÿ Camera must be turned off before inserting or taking out the memory card.
Ÿ Do not take out Micro SD (TF) card or disconnect the camera from USB port
while formatting the card or transferring data to your computer,otherwise
recorded data and memory card may become damaged.
2.Operating
As soon as you have inserted the batteries and a Micro SD card,the camera is ready for work! All you need to do is to choose a position for it and turn it on by setting the operating mode switch to ON.
The camera has the following default settings:
Ÿ Mode:Photo
Ÿ Photo resolution:5MP
Ÿ Photo series:1 photo
Ÿ Video resolution:1280x720P
Ÿ Video length:10 seconds
Ÿ Audio recording:On
Ÿ Shot lag:30 seconds
Ÿ Motion sensor sensitivity:Middle
Ÿ Target recording time:Off
Ÿ Time lapse:Off
With the default settings,the camera will first take 1 photos when its motion sensor detects a moving object.Please note that If you want sharper image quality,you can turn up the resolution,however photo and video files created with these settings will take more space on memory card.
Fasten the camera to a tree or any other suitable object using the included strap and align the camera in the desired direction.Then move slowly from one side of the target area to another.While doing this,watch the indicator located between IR LEDs.
If the red indicator lights up,you have been detected by the motion sensor.This way you can find the best position for the camera.The detecting range of the sensor is
120°.
NOTE:Setting the camera too close to tree branches can result in many “empty” photos as the motion sensor will detect movements of tree branches and leaves.You can also adjust the sensor sensitivity to the lower level to avoid irrelevant triggering.
2.2.Turning on the Camera
To turn on the camera,set the operating mode switch to ON.You will see a blinking blue indicator on the front panel.After 15 seconds the camera will start to operate independently and will go into standby mode.As soon as any object enters the detecting range of the motion sensor,the camera will be activated and will start capturing photos and/or videos (depending on the selected setup).
When the object moves out of the detecting range of the motion sensor,the camera will go back into standby mode.
In the nighttime,infrared LEDs will provide the required light for capturing photos/videos.The effective range of the IR LEDs is 10- 65ft.Pictures and videos taken at night are black and white.
NOTE:During the night,camera will use more energy for IR LEDs.Therefore,if the battery is low (Less than 1/2),the camera will not take photos or shoot videos at night,while in the daytime,the camera will work normally even with a low battery.
3.Playback
For instance,4GB Micro SD (TF) card can store about 140 photos plus 70 videos (10 sec each) with the default settings.Therefore if you are using a small capacity Micro
SD (TF) card,or considering to set your camera for a longer period of time,you might want to reduce photo and/or video resolution in the Settings.
2.1.Positioning the Camera
You can quickly preview recorded photos and videos on LCD screen.Open the camera by unlocking two side locks and set the operating mode switch to the TEST position.Press REPLAY key and Up/Down navigation keys to review the photos/videos.To play videos,press OK key to start playing and press OK again to stop.Press
REPLAY key to return back to standby.
3.1.Delete Selected Files
You can use this function to delete photos/video recordings from the memory card.Find the file you want to delete in REPLAY mode,then press MENU key,select
“Delete current file” and press OK to delete the selected recording.
3.2.Delete All Files
You can delete all recordings from the memory card by pressing MENU key when in
REPLAY mode,then select “Delete all files” and press OK.
3.3.Activate Slide Show
For an automatic review of the photos and videos stored on the memory card,press
MENU in REPLAY mode,and select “Activate Slide Show”.Each photo/video will be displayed for about 2 seconds.To stop the slide show and keep the current image on the screen,press the OK button.
3.4.Write Protection
This function can be used to protect individual files from accidental deletion.When in
REPLAY mode,press MENU and select “Write protect,” then choose “Write-protect current file” to protect the selected photo/video.Select “Write-protect all files” to protect all recordings from accidental deletion.Select “Unlock current file” to remove write protection for the selected recording.
Select “Unlock all files” to remove write protection for all saved recordings.
Installation
If you want to put the camera on the wall, the Fixation Kit is
ready for you
：
1. Mark the installation position with the help of the metal plate and make holes in
the wall;
2. Put the green components in the holes;
3. Fix the Fixation Kit by following the picture;
4. Put the camera at the position you have chosen and fix the camera with screws;
If you want to Install the camera on a tree, you could simply use the Installation Belt
：
1. Pass the Installation Belt through the support on the back of the camera. If the
Belt is too long for the tree which you choose, there are 3 holes on each side the
support, you could pass the Installation Belt through several holes to shorten the
belt;
2. Put the camera on the bottom of the tree;
3. Go to the other side of the tree, pass the belt through the buckles by following
the picture;
4. Adjust the position of the camera then tighten the belt;
5. If you afraid that the camera would fall, you could also use the Fixation Kit and the Installation Belt together to make sure that the camera is sturdily fixed on the right position.
QA
1. I can’t turn on my camera!
Please check if the batteries is full power;
Please check if battery polarity is correct;
Please re-install the batteries.
2. My camera is not taking photos or recording videos!
Check if the TF card is Class 10;
Check if the TF card works normally on other devices;
Format the TF card.
3. The camera doesn’t detect anything!
Please make sure that the camera is not behind the glass;
Please check the setting in the menu to adjust the detection distance and the detection sensibility of the camera then try again.
4. Why the camera doesn’t record during the night but it works well during day time!
Please check the battery level of the camera. If the battery is low (1/3 of the full
battery), the night vision function will automatically shut down. Please change the
batteries then the night vision function will restore.
5. My “Target Recording Time” function doesn’t work!
Please check if you have also turned on the “Time Lapse” function and have chosen the time lapse mode then set up the lapse length.
Precaution
Do not dip the camera in the water.
The camera can work under 160°F but please keep the camera far enough from
fire to protect batteries.
Alkaline batteries are strongly recommended because alkaline batteries are able to provide strong and stable power to the camera.
Please do not mix old batteries and new batteries.
If an DC 6V power adapter is used to supply the camera, please make sure there are no batteries in the camera in order to prevent the overcharge.
Warranty
In the spirit of "high quality,service,and development",with the concept of
"quality products,reasonable prices,and considerate service" and the principle of responsibility and openness.We solemnly promises you:We guarantees that the manufactured products are produced and inspected in accordance with the relevant national standards.Substandard products will never leave the factory.Guarantee strict performance and fulfillment of product warranty,and strictly enjoy the relevant regulations of professional service.To get extra 12-month warranty,total 24 months,please contact official service team: Email:[email protected] ,and provide information(order number,product name).When the trail camera is replaced,the warranty will still be the original trail camera you bought.You may return the product after first obtaining a Return Material Authorization number and following any other guidelines. [email protected]
vikeri.tech
@VIKERI Cams
@VIKERI.cams
@VIKERI Cams
@VIKERI Cams
