Hard Reset SHARP Aquos Sense Plus

Hard Reset SHARP Aquos Sense Plus

How to factory reset SHARP Aquos Sense Plus? How to wipe all data in SHARP Aquos Sense Plus? How to bypass screen lock in SHARP Aquos Sense Plus? How to restore defaults in SHARP Aquos Sense Plus?

The following tutorial shows all method of master reset SHARP Aquos Sense Plus. Check out how to accomplish hard reset by hardware keys and Android 8.0 Oreo settings. As a result your SHARP Aquos Sense Plus will be as new and your Qualcomm Snapdragon 630  core will run faster.

First method:

1. In the beginning, make sure your device is turned off. You can turn it off by pressing and holding the Power button for a couple of seconds.

2. Then press and hold the Power button and the Volume Up button together.

3. When the Sharp logo appears on the screen release both buttons.

4. When the Android logo with "No Command" written under it press the Volume

Up and the Power button together.

5. You should be in the Factory Mode. Use the Volume Up and the Volume Down buttons to move through the menu.

6. Next, move down to the "Wipe Data/Factory Reset" and press the Power button to con rm the selection.

7. Then move to the "Yes--" and press the Power button to reset your device.

8. Wait until the process is done, scroll to the "Reboot System Now" and press the

Power button to restart your device.

9. Good job! The Hard Reset process should be complete now.