MEASUREMENT
lIGHT ARRAYS
MEASUREMENT
DS3 SERIES
The AREAscan™ light arrays of
the DS3 series are optoelectronic
multibeam devices that can be used to
detect, measure and control the position
of objects, also transparent and small.
Models with 150, 300, 450 or 600 mm
detection field height are available, as
well as presenting 0.2 - 0.6 m or 0.6 1.5 m operating distances.
Internal dip-switches for configuration
are available on all models, together
with the Teach-in setting button with
Remote and self-calibration function,
LED indicators for the signalling of the
device operating and auto-diagnostic
status.
The synchronisation via cable of the
emitter and receiver units guarantees
high optic and electromagnetic
interference immunity. The integrated
electronics eliminates the need for an
external control unit.
The compact dimensions (35 x 40
mm), easy installation and excellent
performances make the DS3 light
grids particularly suitable to the many
different applications of automatic
packaging and industrial automation in
general.
highlightS
•Operating distance reaching 1.5 m
and up to 600 mm controlled height
•Digital PNP and 0 - 10 V analogue
outputs
•Simple configuration obtained using
the internal dip-switches
•Teach-in setting with Remote and selfcalibration function
APPLICAtions
• Control of the correct material positioning (opaque and transparent) during
functioning (plastic, metal, paper etc)
• Detection of objects with different shapes in the food industry
• Loop control and positioning (also transparent material
• Detection of objects with different shapes in the food industry
DIMENSIONS
The following operating modes can be
selected via internal dip-switches on the
receiver unit and the SET and calibration button:
• Scanning with parallel or crossed
beams
• Manual calibration or at powering on
• Absolute 1 or relative 2 measurement
• Absolute 3 or relative 4 detection
• Precise detection or with a
tolerance channel
• Light or dark output
• Sensitivity level
Notes:
1. In this mode, the analogue output is proportional to the last obscured optic
2. In this mode, the analogue output is
proportional to the the total number of
obscured optics
3. In this mode, a certain object in a certain position in the sensitive area can be detected
through Teach-in. The digital ouput switches
every time the object is in this position
4. In this mode, a certain object can be detected through Teach-in. The digital output
switches each time the object is inside the
sensitive area in any position
MODEL
a x b (mm)
h (mm)
DS3-SD-015
35 x 40
226
DS3-SD-030
35 x 40
376
DS3-SD-045
35 x 40
526
DS3-SD-060
35 x 40
676
DS3-LD-015
35 x 40
226
DS3-LD-030
35 x 40
376
DS3-LD-045
35 x 40
526
DS3-LD-060
35 x 40
676
CONNECTIONS
RECEIVER (RX)
www.datalogic.com
EMITTER (TX)
1
=
white
=
SYNC D-
1
=
brown
=
+VDC
2
=
brown
=
+VDC
2
=
white
=
SYNC D+
3
=
green
=
NOT USED
3
=
blue
=
0V
4
=
yellow
=
PNP OUTPUT
4
=
black
=
SYNC D-
5
=
grey
=
Analog OUTPUT
6
=
pink
=
SYNC D+
7
=
blue
=
0V
8
=
red
=
REMOTE TEACH-IN /CALIBRATION
technical data
Power supply:
Consumption on emitter unit:
Consumption on receiver unit:
Outputs:
Load current on PNP output:
Saturation voltage on PNP output:
Response time:
Emission type:
Resolution with crossed beams
minimum object detectable:
Resolution with parallel beams
minimum object detectable:
Relative measurement precision
(parallel beams):
Absolute measurement precision
(parallel beams):
Dimensional difference between equally detected objects in the absolute
teach-in mode:
Dimensional difference between equally detected objects in the absolute
teach-in mode:
Operating distance:
Receiver indicators:
Emitter indicators:
Operating temperature:
Storage temperature:
Humidity:
Electrical protection:
Mechanical protection:
Vibration resistance:
Shock resistance:
Housing material:
Optics material:
Connections:
Weight:
FUNCTIONING MODE
24 Vdc ± 15 %
100 mA max.
100 mA max. without load
1 PNP output; max. 10 kW load
1 analog output; 0 - 10 V (D Vmax. 5%)
100 mA; short circuit protection
1 V a T=25°C
refer to selection table
infrared 880 nm
DS3-SD: 0.5 mm
DS3-LD: 0.8 mm
6 mm
High resolution detection of small or
transparent objects
± 6 mm
± 3 mm
± 6 mm
∆ = 12 mm
0.2 - 0.6 m (SD vers. parallel beams)
0.3 - 0.6 m (SD vers. crossed beams)
0.6 - 1.5 m (LD vers.)
green POWER ON LED
orange OUT LED
red FAILURE/ERROR LED
green POWER ON LED
- 10 … + 55 °C
- 25 … + 70 °C
15…95 % (uncondensed)
class 1
IP 65 (EN 60529)
0.7 mm width,
10 … 55 Hz amplitude,
10 sweep for X, Y, Z axis;
1 octave/min., (EN 60068-2-6)
16 ms (about 10 G) 1.000
shock for axis (EN 60068-2-29)
painted aluminium (shiny black RAL9005)
PMMA
M12-4 pole connector for TX
M12-8 pole connector for RX
DS3-015: 310 g. per unit
DS3-030: 530 g. per unit
DS3-045: 700 g. per unit
DS3-060: 980 g. per unit
Detection and measurement of an
object’s height or profile
Detection mode (teach-in)
Note: different operating modes can be selected: absolute
or relative measurement respect to a reference by means
of internal dip-switches and absolute or relative detection respect to a reference by means of internal dipswitches and SET button
SELECTION TABLE
DS3-SD-015
DS3-SD-030
DS3-SD-045
DS3-SD-060
DS3-LD-015
DS3-LD-030
DS3-LD-045
DS3-LD-060
total length:
226 mm
376 mm
526 mm
676 mm
226 mm
376 mm
526 mm
676 mm
controlled area length:
150 mm
300 mm
450 mm
600 mm
150 mm
300 mm
450 mm
600 mm
n° beams
24
48
72
96
24
48
72
96
response time of
crossed beams:
23 ms.
46 ms.
69 ms.
92 ms.
23 ms.
46 ms.
69 ms.
92 ms.
response time of parallel
beams:
3 ms.
6 ms.
9 ms.
12 ms.
3 ms.
6 ms.
9 ms.
12 ms.
operating distance:
0.2 ... 0.6 m
0.2 ... 0.6 m
0.2 ... 0.6 m
0.2 ... 0.6 m
0.6 ... 1.5 m
0.6 ... 1.5 m
0.6 ... 1.5 m
0.6 ... 1.5 m
MODEL SELECTION AND ORDER INFORMATION
MODEL
DISTANCE
CONTROLLED HEIGHT
ORDER N°
DS3-SD-015
short
150 mm
957600100
DS3-SD-030
short
300 mm
957600110
DS3-SD-045
short
450 mm
957600150
DS3-SD-060
short
600 mm
957600170
DS3-LD-015
long
150 mm
957600120
DS3-LD-030
long
300 mm
957600140
DS3-LD-045
long
450 mm
957600160
DS3-LD-060
long
600 mm
957600180
Fixing brackets and screws are supplied with the product
ACCESSORY SELECTION AND ORDER INFORMATION
MODEL
DESCRIPTION
ORDER N°
CV-A1-22-B-03
axial M12 4-pole shielded 3 m connector
95ACC1480
CV-A1-22-B-05
axial M12 4-pole shielded 5 m connector
95ACC1490
CV-A1-22-B-10
axial M12 4-pole shielded 10 m connector
95ACC1500
CV-A1-26-B-03
axial M12 8-pole shielded 3 m connector
95ACC1510
CV-A1-26-B-05
axial M12 8-pole shielded 5 m connector
95ACC1520
CV-A1-26-B-10
axial M12 8-pole shielded 10 m connector
95ACC1530
Note: the cabled connectors have to be ordered separately
The company endeavours to continuously improve and renew its products; for this reason the technical data and contents of this catalogue may undergo
variations without prior notice. For correct installation and use, the company can guarantee only the data indicated in the instruction manual supplied with the
products.
www.datalogic.com
">
