Datalogic Memor 10 Handheld Computer User Manual

Rugged Mobile Computer with 1D/2D Imager
User’s Manual
Datalogic S.r.l.
Via S. Vitalino, 13
40012 Calderara di Reno
Italy
Tel. +39 051 3147011
Fax +39 051 3147205
©2019-2020 Datalogic S.p.A. and/or its affiliates
 All rights reserved.  Without limiting the rights under copyright, no part of this
documentation may be reproduced, stored in or introduced into a retrieval system, or
transmitted in any form or by any means, or for any purpose, without the express
written permission of Datalogic S.p.A. and/or its affiliates. Owners of Datalogic
products are hereby granted a non-exclusive, revocable license to reproduce and
transmit this documentation for the purchaser's own internal business purposes.
Purchaser shall not remove or alter any proprietary notices, including copyright
notices, contained in this documentation and shall ensure that all notices appear on
any reproductions of the documentation.
Should future revisions of this manual be published, you can acquire printed versions
by contacting your Datalogic representative. Electronic versions may either be
downloadable from the Datalogic website (www.datalogic.com) or provided on
appropriate media. If you visit our website and would like to make comments or
suggestions about this or other Datalogic publications, please let us know via the
"Contact Datalogic" page.
Disclaimer
Datalogic has taken reasonable measures to provide information in this manual that is
complete and accurate, however, Datalogic reserves the right to change any
specification at any time without prior notice.
Datalogic and the Datalogic logo are registered trademarks of Datalogic S.p.A.
in many countries, including the U.S.A. and the E.U. Memor and SoftSpot are
trademarks of Datalogic S.p.A. and/or its affiliates. Google, Google Play and other
marks are trademarks of Google LLC. All other brand and product names may be
trademarks of their respective owners.
Patents
See www.patents.datalogic.com for patent list.
Table of Contents
Introduction ....................................................................... 1
Conventions ..................................................................................1
Product Presentation ..................................................................2
Features ................................................................................2
Available Models ..........................................................................4
Americas Models ..................................................................4
EMEA and Row Models .......................................................4
Out of the Box ...............................................................................6
General View .................................................................................7
Front View .............................................................................7
Back View ..............................................................................8
Side View ...............................................................................9
Accessories ................................................................................ 11
Battery ............................................................................. 14
Install the Battery ..................................................................... 14
Charge the Battery .................................................................... 16
Charge with USB ................................................................ 16
Charge with the dock ........................................................ 18
Battery Information .................................................................. 20
Battery Safety Guidelines ......................................................... 22
SD Card/ SIM Card.......................................................... 26
Install the MicroSD Card ........................................................... 26
Install the MircoSIM Card ......................................................... 28
Getting Started ............................................................... 30
Turn on the Device .................................................................... 30
User’s Manual
i
Home Screen - GMS Models .....................................................30
Home Screen - No GMS Models ...............................................31
Home Screen Items ...........................................................31
Status Bar Icons .................................................................32
Suspend Mode ............................................................................33
Long Press Power Menu ...........................................................34
Battery Swap ..............................................................................35
Applications ................................................................................40
GMS Models ........................................................................40
No GMS Models ..................................................................43
Touch Gestures ...........................................................................45
Reset the Device ........................................................................46
Configuration Reset ...........................................................46
Setup Wizard ..............................................................................52
Device Owner Mode ...........................................................53
LED Indicators ............................................................................55
Settings ............................................................................ 56
Overview .....................................................................................56
Network & Internet ....................................................................57
Connect to Wi-Fi Network ................................................57
Add a Wi-Fi Network .........................................................60
Data Usage .........................................................................62
Hotspot & Tethering ..........................................................63
Airplane Mode ....................................................................64
Reset Networks ..................................................................65
Connected Devices .....................................................................66
Bluetooth Settings .............................................................66
NFC ......................................................................................70
System ........................................................................................71
System Update ...................................................................71
Recovery Mode ...................................................................76
ii
Memor™ 10
Scanner Settings ............................................................... 78
Advanced Settings ............................................................ 94
Datalogic Applications ................................................. 105
DL Battery Manager ................................................................ 105
Battery Info ...................................................................... 107
Charging Profile ............................................................... 111
Data Logging .................................................................... 113
Application ....................................................................... 117
Scan2Deploy ............................................................................ 118
Desktop Configuration Utility (DXU) ...................................... 119
SoftSpot™ .................................................................................. 120
Tools............................................................................... 123
USB ADB Driver & USB CD-ROM ............................................ 123
SDK Add-on .............................................................................. 124
Install ADB Driver ............................................................ 124
Create a New Application based on Datalogic SDK Add-on
with Android Studio ........................................................ 125
Datalogic SDK .......................................................................... 125
Data Capture ................................................................. 127
Models with Laser Aiming System ........................................ 127
Models with LED Aiming System .......................................... 129
Connections .................................................................. 131
USB Connection ....................................................................... 131
USB Direct Connection .................................................... 131
WLAN Connection ................................................................... 132
WWAN Connection .................................................................. 133
WPAN Connection ................................................................... 135
Near Field Communication (NFC) .......................................... 137
Read NFC Tags ................................................................. 137
Wireless and Radio Frequencies Warnings ......................... 138
Technical Features ....................................................... 141
User’s Manual
iii
Technical Data ......................................................................... 141
Test Codes..................................................................... 147
Maintenance................................................................. 155
Cleaning .................................................................................... 155
Ergonomic Recommendations .............................................. 156
Safety and Regulatory Information ........................... 157
General Safety Rules .............................................................. 157
Power Supply ........................................................................... 158
LED Class ................................................................................. 158
Audio Safety ............................................................................. 158
Marking and European Economic Area (EEA) ...................... 159
Statement of Compliance .............................................. 159
NBTC Statement .............................................................. 163
Information for the User ................................................ 164
Radio Type Description ........................................................... 167
Frequency Maximum Output Power ............................. 167
FCC Compliance ....................................................................... 169
ISED Compliance ..................................................................... 172
ISED Radiation Exposure Statement ............................ 172
Waste Electrical and Electronic Equipment (WEEE) ........... 174
Support Through the Website .................................... 177
Reference Documentation ..................................................... 177
Warranty Terms and Conditions ........................................... 177
Glossary......................................................................... 179
iv
Memor™ 10
Introduction
Conventions
This manual uses the following conventions:
"PDA", "mobile computer", "device" and "Memor 10" refer to the
Memor 10.
"Dock" and "Single Dock" refer to the Memor 10 Single Slot Dock.
The label artworks may be only a draft. Refer to the product labels
for more precise information.
User’s Manual
1
Introduction
Product Presentation
The Memor 10 PDA incorporates the latest smartphone technologies
and the user friendly experience of Android™ in a slim and compact
design, combined with high performance 1D/2D bar code scanning
and industrial robustness for almost any indoor or outdoor
environment.
The Memor 10 is powered by a superior octa-core platform clocked at
2 GHz for top performance with the most demanding applications,
and features Android 8.1 (Oreo) with Google Mobile Services (GMS).
Moreover, it is one of the first rugged mobile computers to be
validated by Google for the ‘Android Enterprise Recommended’
program for rugged devices.
The Memor 10 incorporates Datalogic’s industry-first wireless
charging system for ultra-reliable contactless charging, thus
eliminating the need for cleaning contacts on the device and docks.
In addition, it offers a 1-piece swappable battery for the best
operational advantage.
The Memor 10 leverages a complete set of embedded wireless
technologies for both indoor and outdoor applications: dual band
Wi-Fi including the latest 802.11ac standard, Bluetooth® v4.2 with
BLE for fast and ultralow power connections, NFC for easy pairing,
and particularly the cellular area voice and data connectivity, already
leveraging the next generation of LTE-Advanced/4G+.
Features
•
Ultra-Ergonomic, compact and robust
•
5 inch capacitive multi-touch HD display with Dragontrail™
hardened glass
•
Android 8.1 (Oreo) with Google Mobile Services
2
Memor™ 10
Introduction
•
Wireless charging eliminates all contacts on the device and
cradle
•
Ruggedized with drop resistance to 1.5m / 5ft to concrete and
IP65 sealing
•
Dual band Wi-Fi including the latest 802.11ac standard and
802.11r/k for fast roaming
•
Full suite of cellular connectivity for voice and data, featuring
LTE-Advanced/4G+
•
Assisted GPS for location based apps
•
Bluetooth v4.2 short range wireless technology
•
NFC for proximity communications
•
Advanced 2D ultra-slim imager with Datalogic’s patented
‘Green Spot’ technology for visual good-read feedback
•
Datalogic’s SoftSpot™ technology for innovative triggering
through the touch display
•
Chemical resistant plastics / enclosure designed to withstand
daily cleaning with harsh disinfectant solutions
•
EASEOFCARE Service Plans offer a wide range of service
options to protect your investment, ensuring maximum
productivity and ROI.
User’s Manual
3
Introduction
Available Models
The Memor 10 is available in different models depending on the
features it is equipped with. All options are listed below:
Americas Models
•
944350004 Memor 10 Full Touch PDA, NA, Wi-Fi + LTE,
Ultra-slim 2D Imager w Green Spot, Android v8.1 with GMS,
Black Color.
•
944350005 Memor 10 HC Full Touch PDA, NA, Wi-Fi + LTE,
Ultra-slim 2D Imager w Green Spot, Android v8.1 with GMS,
White Color.
•
944350006 Memor 10 Full Touch PDA, NA, Wi-Fi + LTE,
Ultra-slim 2D Imager w Green Spot, Android v8.1 No GMS, Black
Color.
•
944350015 Memor 10 Full Touch PDA, NA, Wi-Fi + LTE,
Ultra-slim MP 2D Imager w Green Spot, Android v8.1 with GMS,
Black Color.
•
944350022 Memor 10 HC Full Touch PDA, NA, Wi-Fi + LTE,
Ultra-slim MP 2D Imager w Green Spot, Android v8.1 with GMS,
White Color.
EMEA and Row Models
•
944350001 Memor 10 Full Touch PDA, EMEA + ROW, Wi-Fi +
LTE, Ultra-slim 2D Imager w Green Spot, Android v8.1 with
GMS, Black Color.
•
944350002 Memor 10 HC Full Touch PDA, EMEA + ROW, Wi-Fi +
LTE, Ultra-slim 2D Imager w Green Spot, Android v8.1 with
GMS, White Color.
4
Memor™ 10
Introduction
•
944350003 Memor 10 Full Touch PDA, EMEA + ROW, Wi-Fi +
LTE, Ultra-slim 2D Imager w Green Spot, Android v8.1 No GMS,
Black Color.
•
944350014 Memor 10 Full Touch PDA, EMEA + ROW, Wi-Fi +
LTE, Ultra-slim MP 2D Imager w Green Spot, Android v8.1 with
GMS, Black Color.
•
944350020 Memor 10 Full Touch PDA, EMEA + ROW, Wi-Fi +
LTE, Ultra-slim MP 2D Imager w Green Spot, Android v8.1 No
GMS, Black Color.
•
944350021 Memor 10 HC Full Touch PDA, EMEA + ROW, Wi-Fi
+ LTE, Ultra-slim MP 2D Imager w Green Spot, Android v8.1 w/
GMS, White Color.
For further details about the Memor 10 models refer to the web site:
http://www.datalogic.com.
For further information regarding Android refer to the website:
www.android.com.
User’s Manual
5
Introduction
Out of the Box
The Memor 10 package contains:
•
Memor 10 PDA
•
Rechargeable one-piece battery pack
•
Handstrap (standard models)
•
Handstrap in cleanable version for Healthcare (Healthcare
models)
•
USB Type-C cable
•
Quick Start Guide
•
Safety & Regulatory Addendum
•
End User License Agreement (EULA) Sheet
Remove all the components from their packaging; check their
integrity and compare them with all the packing documents.
CAUTION
6
Keep the original packaging for use when sending
products to the technical assistance center. Damage
caused by improper packaging is not covered under the
warranty.
Memor™ 10
Introduction
General View
Front View
Charging LED
Good Read Indicator
Touch Panel
Display
Back
Recent
Home
User’s Manual
7
Introduction
Back View
TOF Sensor
Speaker
LED
Flash
Battery
Swap
LED
MicroSD Card Socket
Battery Latch
Battery
Latch
Battery Pack
MicroSIM
Card
Socket
NFC
Working
Area
8
Memor™ 10
Introduction
Side View
Power Button
Volume Control
Buttons
Right Trigger
Left Trigger
USB Type-C Port
Top View
Data Capture Window
User’s Manual
9
Introduction
Do not apply any sticker to the Memor 10.
CAUTION
10
Memor™ 10
Introduction
Accessories
Docks
94A150095
94A150098
94A150096
94A150097
95ACC1113
95ACC1213
95A051041
95ACC1215
95ACC1212
95ACC1284
94ACC0196
94ACC0197
94A050045
User’s Manual
Dock, Single Slot, Memor 10, Black Color (requires
power supply 94ACC0197 and power cord to be
purchased separately)
Dock, Single Slot, Healthcare, Memor 10, White
Color (requires power supply 94ACC0197 and
power cord to be purchased separately)
Dock, Triple Slot, Memor 10, Black Color (requires
power supply 94ACC0197 and power cord to be
purchased separately)
Vehicle Dock, Memor 10, Black Color (Includes
12/24V CLA adapter)
POWER LINE CORD, 3-PIN IEC C13, USA
POWER LINE CORD, 3-PIN IEC C13, UK
POWER LINE CORD, 3-PIN IEC C13, EU
POWER LINE CORD, 3-PIN IEC C13, AUSTRALIA
POWER LINE CORD,3-PIN IEC C13, JAPAN
POWER LINE CORD, 3-PIN IEC C13, ARGENTINA
POWER SUPPLY, USB-C, MEMOR 10 (includes 4
regional plugs)
POWER SUPPLY, DOCKS & CHARGERS, MEMOR
10 (power line cord to be purchased separately)
POWER ADAPTER,12/24VDC CLA, MEMOR 10
(already included with Vehicle Dock)
11
Introduction
General Accessories
94ACC0200
94ACC0201
94ACC0202
94ACC0203
Handstrap, Memor 10 (5 PCS)
Attachable Pistol-Grip Handle, Memor 10, Black
Color (requires Rubber Boot 94ACC0193)
Pocket clip, Memor 10
Handstrap, Healthcare, Memor 10, Green Color (5
PCS)
Batteries/ Battery Chargers
94ACC0191
94ACC0205
94ACC0192
Battery, Standard, Memor 10, Black Color
Battery, Healthcare, Memor 10, White Color
CHARGER, 4 SLOT BATTERY, Memor 10, Black Color
(requires power supply 94ACC0197 and power cord
to be purchased separately)
Cables
94A050044
Cable from USB-C (Memor 10 PDA) to female USB
type A. Device can work only in client mode.
Special USB-C OTG cable is needed for Memor 10
to work in host mode. 1.2 m straight.
Holsters/ Cases
94ACC0193
94ACC0204
94ACC0194
94ACC0195
12
RUBBER BOOT, MEMOR 10, Black Color
RUBBER BOOT, HC, MEMOR 10, Green Color
WEARABLE HOLDER, MEMOR 10, Black Color
Holster for Memor 10, contains belt clip
Memor™ 10
Introduction
NOTES
User’s Manual
13
Battery
Install the Battery
To install the battery pack, follow the steps below:
1. Rotate the latches to the open position:
2. Insert the battery pack into the slot, bottom first, and press it
into place:
User’s Manual
14
Battery
3. Rotate the latches to the lock position to lock the cover:
User’s Manual
15
Battery
Charge the Battery
The battery pack is not initially fully charged. After installing the
battery, charge it with the USB Type-C or with a dock (single slot dock,
3-slot dock, vehicle dock).
During the charging process the charging LED positioned at the top
left side of the display glows red constantly. Once the charging
process has been completed, the charging LED glows green
constantly.
Charge with USB
Use the provided USB Type-C cable in conjunction with the power
supply adapter (p/n 94ACC0196) to charge the device from a power
outlet.
The charger is modular, with one adapter and five switchover plugs.
Connection through the cable complies to USB Type-C
standard.
NOTE
16
Memor™ 10
Battery
You can also use the USB cable to charge the Memor 10 from any
self-powered USB hub or USB port on a computer.
Use only the Datalogic power supply 94ACC0196 to power
the Memor 10.
NOTE
User’s Manual
17
Battery
Charge with the dock
Insert the device into the dock with the screen facing front and the
head facing up.
The dock is able to provide wireless power to the Memor 10 when the
device is correctly inserted.
Use only the Datalogic power supply 94ACC0197 to power
any of the docks.
CAUTION
Do not attempt to charge any other device different
from the Memor 10 devices.
WARNING
18
Memor™ 10
Battery
CAUTION
NOTE
User’s Manual
Make sure there is nothing between the dock and the
device.
Do not put any foreign object such as, but not limited to,
coins, paper clips, stickers inside the slot of any of the
docks (see the examples below).
For information on the single slot dock/ 3-slot dock/
vehicle dock/ 4-slot battery charger refer to the Quick Start
Guide included in the dock's box.
19
Battery
Battery Information
CAUTION
Do not incinerate, disassemble, short terminals, or
expose to high temperature. Risk of fire and explosion.
Use specified charger only. Risk of explosion if the
battery is replaced by an incorrect type. Dispose of
batteries as required by local authorities.
By default, the main battery pack is disconnected at the factory to
avoid damage due to excessive draining.
Rechargeable battery pack is less than half of full charge when
delivered. Before using the Memor 10, charge the battery pack as
indicated in Charge the Battery on page 16.
The battery pack autonomy varies according to many factors, such as
the frequency of barcode scanning, RF usage, battery life, storage,
environmental conditions, etc.
Close to the limits of the working temperature, some battery
performance degradation may occur.
The Memor 10 should be charged at an ambient temperature
between 0 - 35º C (32 to 122ºF) to achieve the maximum charging
rate.
Never charge the device battery in a closed space where excessive
heat can build up.
As a safety precaution, the battery may stop charging to avoid
overheating.
The Memor 10 gets warm during charging; this is normal and does
not mean a malfunction.
Even if the storage temperature range is wider, it is recommended to
store the terminal and the batteries at environmental temperature,
in order to achieve the longest battery life.
20
Memor™ 10
Battery
Avoid storing batteries for long periods in a state of full
charge or very low charge.
CAUTION
We recommend charging the battery pack every two to
three months to keep its charge at a moderate level to
maximize battery life.
Annual replacement of rechargeable battery pack avoids
possible risks or abnormalities and ensures maximum
performance.
Use only Datalogic approved batteries and accessories
for battery charging.
WARNING
Risk of explosion if battery is replaced by an incorrect
type.
Dispose of used batteries according to the instructions.
l y a risque d’explosion si la batterie est remplacée par
une batterie de type incorrect.
Mettre au rebut les batteris usagées conformément aux
instructions.
The adapter shall be installed near the equipment and
shall be easily accessible.
CAUTION
User’s Manual
21
Battery
Battery Safety Guidelines
Installing, charging and/or any other action should be
done by authorized personnel and following this
manual.
WARNING
The battery pack may get hot, explode, ignite, and/or
cause serious injury if exposed to abusive conditions.
If the battery pack is replaced with an improper type,
there is risk of explosion and/or fire.
Use the battery box to carry the battery pack, do not
put the battery pack in your pocket.
Do not place the battery pack in or near a fire or other
heat source; do not place the battery pack in direct
sunlight, or use or store the battery pack inside
unventilated areas in hot weather; do not place the
battery pack in microwave ovens, in clothes dryers, in
high pressure containers, on induction cook surfaces
or similar devices. Doing so may cause the battery
pack to generate heat, explode or ignite. Using the
battery pack in this manner may also result in a loss
of performance and a shortened life expectancy.
To power the cradle, use only a Datalogic approved
power supply. The use of an alternative power supply
will void the product warranty, may cause product
damage and may cause heat, an explosion, or fire.
The area in which the units are charged should be
clear of debris and combustible materials or
chemicals.
Do not use the battery pack of this terminal to power
devices other than this terminal.
22
Memor™ 10
Battery
WARNING
Immediately discontinue use of the battery pack if,
while using, charging or storing the battery pack, the
battery pack emits an unusual smell, feels hot,
changes color or shape, or appears abnormal in any
other way.
Do not short-circuit the battery pack contacts
connecting the positive terminal and negative
terminal. This might happen, for example, when you
carry a spare battery pack in your pocket or purse;
accidental short–circuiting can occur when a metallic
object such as a coin, clip, or pen causes direct
connection of the contacts of the battery pack (these
look like metal strips on the battery pack). Short–
circuiting the terminals may damage the battery pack
or the connecting object.
Do not apply voltages to the battery pack contacts.
Do not pierce the battery pack with nails, strike it with
a hammer, step on it or otherwise subject it to strong
impacts, pressures, or shocks.
Do not disassemble or modify (i.e. bend, crush or
deform) the battery pack. The battery pack contains
safety and protection devices, which, if damaged, may
cause the battery pack to generate heat, explode or
ignite.
In case of leakage of liquid from the battery, avoid
contact with liquid the skin or eyes. If the contact
occurs, immediately wash the affected area with
water and consult a doctor.
Do not solder directly onto the battery pack.
Do not expose the battery pack to liquids.
User’s Manual
23
Battery
Avoid any knocks or excessive vibrations. If the device
or the battery is dropped, especially on a hard surface,
you should take it to the nearest Authorised Repair
Centre for inspection before continuing to use it.
WARNING
If your device stops working for any reason, do not use
its battery on other electronic devices without a prior
check and approval by an Authorised Repair Centre.
Do not remove or damage the battery pack’s label.
Do not use the battery pack if it is damaged in any
part.
Battery pack usage by children should be supervised.
Collect and recycle waste batteries separately from
the device in compliance with European Directive
2006/66/EC, 2011/65, 2002/96/EC and subsequent
modifications, with US and China regulatory laws and
regulations about the environment.
24
Memor™ 10
Battery
NOTES
User’s Manual
25
SD Card/ SIM Card
Install the MicroSD Card
Memor 10 supports microSD memory cards. To access the microSD
card slot and insert the card follow the steps below:
1. Turn off the Memor 10 or put it in Swap Battery mode (Battery
Swap on page 35.
2. Rotate the latches to the open position and remove the battery
pack:
User’s Manual
26
SD Card/ SIM Card
3. Insert the microSD card with the written part upward:
4. Replace the battery pack (Install the Battery on page 14, steps 2
to 3.
Remove the MicroSD Card
To remove the microSD card, follow the steps above to access the
microSD slot, and remove it from its slot.
User’s Manual
27
SD Card/ SIM Card
Install the MircoSIM Card
A SIM card stores the subscriber's personal information, GSM/GPRS
radio settings, security keys, contacts, etc. SIM cards can be installed
in compatible mobile devices, enabling you to switch devices without
losing personal and setup information.
Memor 10 supports microSIM cards.
To access the microSIM card slot and insert the card follow the steps
below:
1. Turn off the Memor 10 or put it in Swap Battery mode (Battery
Swap on page 35.
2. Rotate the latches to the open position and remove the battery
pack:
28
Memor™ 10
SD Card/ SIM Card
3. Insert the microSIM card with the written part upward:
4. Replace the battery pack (Install the Battery on page 14, steps 2
to 3.
Remove the microSIM Card
To remove the microSIM card, follow the steps above to access the
microSIM card slot, and remove it from its slot.
User’s Manual
29
Getting Started
Turn on the Device
To turn on the Memor 10, press and hold the power button for at
least 4 seconds.
Home Screen - GMS Models
Notification/
Status Bar
Favorites Tray
User’s Manual
30
Getting Started
Home Screen - No GMS Models
Notification/
Status Bar
Favorites Tray
Home Screen Items
Notification/
Status Bar
Displays the time, status icons (right side), and
notification icons (left side).
Favorites Tray
It is like a dock for your home screen. By default, it
includes commonly used apps, but you can customize it.
User’s Manual
31
Getting Started
Status Bar Icons
Wi-Fi is on.
Wi-Fi not connected.
Wi-Fi connected no internet.
Connected to a Wi-Fi network.
Bluetooth is on.
Battery is low.
External power source is connected.
Battery is full.
Battery is partially drained.
Airplane mode.
Vibrate mode.
SD storage.
32
Memor™ 10
Getting Started
Suspend Mode
Suspend mode automatically turns the screen off and locks the
terminal to save battery power when the terminal is inactive for a
programmed period of time.
Press and release the power button to toggle the terminal in or out
of suspend mode:
To unlock the home screen, tap anywhere on the screen and drag
your finger upward.
To set the timeout limit, see Suspend Timeout on page 94.
User’s Manual
33
Getting Started
Long Press Power Menu
Press and hold the Power button until the Long Press Menu menu
displays:
Power Off
Tap Power Off to turn off the terminal. When you turn off the
terminal, the session you are working on expires and it won't be
possible to restore it.
Restart
Tap Restart to restart the terminal.
Battery Swap
See Battery Swap on page 35.
34
Memor™ 10
Getting Started
Battery Swap
Battery Swap mode is a low power suspend mode that allows you to
replace the battery pack without closing files and applications. It
maintains the main memory contents and keeps applications
running but does not allow you to operate any of the device's
functions.
To switch to Swap Battery mode, you have two options:
Option 1
1. Rotate one battery latch to the open position. The battery swap
LED lights up solid red:
2. Wait for the LED to turn solid green and then rotate the other
latch to the open position:
User’s Manual
35
Getting Started
3. Replace the battery.
4. Press and release the power button to resume your session.
Option 2
1. Press and hold the Power button to display the Long Press Menu
and tap Battery Swap:
36
Memor™ 10
Getting Started
2. Tap Confirm:
3. The battery swap LED lights up solid red:
User’s Manual
37
Getting Started
4. Wait for the LED to turn solid green and then rotate the battery
latches to the open position:
5. Replace the battery.
6. Press and release the power button to resume your session.
CAUTION
38
Be sure to insert a charged battery pack. If the battery
is fully discharged, the device may freeze. If this
happens, insert a charged battery.
Memor™ 10
Getting Started
The battery swap procedure is not available when the
device is connected via USB cable.
CAUTION
The battery swap procedure is not available if the
Ni-MH battery is fully discharged.
CAUTION
Replace the battery pack within 1 minute after its removal
from the device.
NOTE
User’s Manual
39
Getting Started
Applications
The All Apps screen displays icons for all installed applications. The
table below lists the default applications installed on the Memor 10.
GMS Models
Icon
Description
Calculator - Provides the basic and scientific arithmetic
functions.
Calendar - Lets you manage events and appointments.
Camera - Use it to take photos or record videos.
Chrome - Google’s own web browser. Use it to access the
Internet or intranet.
Clock - Lets you schedule alarms for appointments or as a
wake-up.
Contacts - Allows you to manage contacts information.
DL Battery Manager - Provides information on the battery
type, charge, status and temperature, allows to set the
charging profile and to log battery data (see DL Battery
Manager on page 105)
Drive - Google's own file storage and synchronization
service. Use it to safely store, synchronize and share your
photos, videos, files and more in the cloud.
40
Memor™ 10
Getting Started
Icon
Description
Duo - Google's own video chat mobile. Use it to make video
calls in high definition.
DXU Agent - Launch to start a pairing with DXU by reading a
barcode containing the configuration data of your PC (see
Desktop Configuration Utility (DXU) on page 119).
File Manager - It lets you manage files and folders.
Gmail - Use it to send and receive email.
Google - Google's own web search engine.
Maps - Google's own mapping mobile app.
Messages - Google's official app for texting (SMS, MMS) and
chat (RCS).
Music - Lets you play music stored on the internal storage
memory and on the microSD card.
Phone - Use it to make phone calls.
Photos - Google's own photo sharing and storage service.
User’s Manual
41
Getting Started
Icon
Description
Play Movies & TV - Google's own online video on demand
service. It offers movies and television shows for purchase
or rental, depending on availability.
Play Music - Music and podcast streaming service and
online music locker operated by Google.
Play Store - Google's own digital distribution service. It
serves as the official app store for the Android operating
system and as a digital media store.
Scan2Deploy - Configuration tool (see Scan2Deploy on
page 118).
Scanner – Enables data capture (see Data Capture on
page 127).
Settings - Use it to configure the Memor 10 (see Settings
on page 56).
SIM Toolkit - Helps manage the SIM card. Use it to view SIM
card information, import, export, delete, add or back up
phone numbers, send messages and make calls.
SoftSpot - A configurable application meant to provide easy
access to frequently used functionalities (see SoftSpot™
on page 120).
Sound Recorder - Use it to record audio.
Youtube - Google's own video-sharing website
42
Memor™ 10
Getting Started
No GMS Models
Icon
Description
Browser - Use it to access the Internet or intranet.
Calculator - Provides the basic and scientific arithmetic
functions.
Calendar - Lets you manage events and appointments.
Camera - Use it to take photos or record videos.
Clock - Lets you schedule alarms for appointments or as a
wake-up.
Contacts - Allows you to manage contacts information.
DL Battery Manager - Provides information on the battery
type, charge, status and temperature, allows to set the
charging profile and to log battery data (see DL Battery
Manager on page 105)
DXU Agent - Launch to start a pairing with DXU by reading a
barcode containing the configuration data of your PC (see
Desktop Configuration Utility (DXU) on page 119).
Email - Use it to send and receive email.
User’s Manual
43
Getting Started
Icon
Description
File Manager - It lets you manage files and folders.
Gallery - Use it to view photos stored on the internal storage
memory and on the microSD card.
Messaging - Use it to send SMS and MMS messages.
Music - Lets you play music stored on the internal storage
memory and on the microSD card.
Phone - Use it to make phone calls.
Scan2Deploy - Configuration tool (see Scan2Deploy on
page 118).
Scanner – Enables data capture (see Data Capture on
page 127).
Search - Use the Google search engine to search the
Internet and the Memor 10.
Settings - Use to configure the Memor 10 (see Settings on
page 56).
SoftSpot - A configurable application meant to provide easy
access to frequently used functionalities (see SoftSpot™
on page 120).
Sound Recorder - Use it to record audio.
44
Memor™ 10
Getting Started
Touch Gestures
Tap
Tap the screen with your finger or with the stylus to open items
and select options.
Drag
Hold your finger or the stylus on the screen and drag across the
screen to scroll or pan. Drag in a list to select multiple items.
Tap-and-hold
Tap and hold your finger or the stylus on an item to see a list of
actions available for that item. On the pop-up menu that
appears, tap the action you want to perform.
User’s Manual
45
Getting Started
Reset the Device
Configuration Reset
Configuration reset sets the configuration of the device (all its
settings) to a known status: the factory status or an
enterprise-user-defined status. You can also reset DRM licenses,
networks or apps preferences.
DRM Reset
Deletes all DRM licenses.
1. Tap Settings > System > Reset options > DRM reset.
46
Memor™ 10
Getting Started
2. Tap DRM reset. The following dialog box will appear:
3.
4. Tap OK.
User’s Manual
47
Getting Started
Reset Wi-Fi, Mobile & Bluetooth
Resets all network settings.
1. Tap Settings > System > Reset options > Reset Wi-Fi, mobile &
Bluetooth.
2. Tap RESET SETTINGS.
48
Memor™ 10
Getting Started
Reset App Preferences
Resets all preferences for:
•
disabled apps
•
disabled app notifications
•
default applications for actions
•
background data restrictions for apps
•
any permission restrictions.
1. Tap Settings > System > Reset options > Reset app preferences.
2. Tap RESET APPS.
User’s Manual
49
Getting Started
Factory Reset
Brings the device to the default configuration, clearing all the
user-customized settings.
1. Tap Settings > System > Reset options > Erase all data (factory
reset).
2. Tap RESET PHONE.
50
Memor™ 10
Getting Started
Enterprise Reset
Enterprise Reset brings the device to an enterprise-user-defined
configuration, clearing all data and settings except the ones
persisted by the enterprise system applications in the enterprise
flash partition and in the splash flash partition.
The Enterprise folder is a file system storage that is used for
deployment and device-unique data. It is persistent and maintains
data after an Enterprise reset. Applications and custom settings (i.e.
custom boot animation and wallpaper) can persist data after an
Enterprise Reset by saving them to the enterprise folder.
1. Tap Settings > System > Reset options > Enterprise reset.
2. Tap RESET PHONE.
User’s Manual
51
Getting Started
Setup Wizard
After the first boot or a factory reset, the start dialog of the Setup
Wizard is displayed, with initial settings for you to configure.
GMS Models
52
No GMS Models
Memor™ 10
Getting Started
Device Owner Mode
GMS Models
To activate Device Owner (DO) mode for Android Enterprise by
scanning a QR code:
1. Tap 6 times. The following screen appears:
2. Tap NEXT and start the QR setup process. Choose a wifi network
and allow the device to download the QR reader.
User’s Manual
53
Getting Started
3. When the QR reader installation is complete, scan the QR code
with the camera, and then agree to the terms and conditions. The
device is now placed in Device Owner (DO) mode.
54
Memor™ 10
Getting Started
LED Indicators
The LEDs illuminate to indicate various functions or errors on the
reader. The following tables list these indications. The good read
LED indicator is programmable, and may or may not be enabled
(Scanner Settings on page 78 for more details).
LED
Status
Red Constant
Charging LED
Good Read
Indicator
User’s Manual
Description
The device is charging.
Green Costant
Charging is complete.
Red Blink
Charge fault.
Red
Light is solid red from the time the user
presses the scan key until the barcode is
decoded, until the scanner times out, or
until the user releases the scan key.
Green
Light changes to solid green when a
good decode is completed.
55
Settings
Overview
The Settings app allows you to check or set system parameters to
customize your device. To open the Settings screen, tap the Settings
icons on the All Apps screen or pull down the notification panel and
then tap the Settings icon next to the date:
User’s Manual
56
Settings
Network & Internet
Connect to Wi-Fi Network
1. To turn on the Wi-Fi, tap Settings > Network & Internet and
switch right to the On position.
If the device finds a network that you connected to previously, it will
connect to it automatically.
User’s Manual
57
Settings
2. Tap Wi-Fi. The Memor 10 scans for available Wi-Fi networks
within range and lists them. Secured networks are indicated with
a lock icon.
3. Select the network name you want to connect to from the
available network list.
4. If the network is open, tap the profile and then tap Connect, or
press and hold and then select Connect to network:
If the network is secured, a dialog box appears requesting
information relevant to the network security protocol (e.g.,
password, key, or certificate). Enter the required information,
then tap Connect:
58
Memor™ 10
Settings
User’s Manual
59
Settings
Add a Wi-Fi Network
1. Tap Settings > Network & Internet and verify that the Wi-Fi is
turned on.
2. Tap Wi-Fi.
3. Tap Add network at the end of the available network list:
4. Enter the Network SSID (Wi-Fi network name). For secure Wi-Fi
network connections, tap None under Security, and then select
the type of security protocol required from the pop-up menu (e.g.,
WEP, WPA/WPA2 PSK or 802.1xEAP). Enter any additional
security information required by the type of security protocol
selected.
60
Memor™ 10
Settings
5. Tap Save.
User’s Manual
61
Settings
Data Usage
To monitor the data usage of all of your apps, Tap Settings > Network
& Internet > Data usage.
The overall data consumed is shown at the top of the screen:
Tap Wi-Fi data usage to display the amount of data used individually
by each app.
62
Memor™ 10
Settings
Hotspot & Tethering
Use hotspot and tethering to provide Internet to other devices
through your mobile data connection. Apps can also create a
hotspot to share content with nearby devices.
User’s Manual
63
Settings
Airplane Mode
To suspend radio-frequency signal transmission by the device and
disable Bluetooth, phone, and Wi-Fi, switch right to the On position:
64
Memor™ 10
Settings
Reset Networks
Resets all network settings, tap the Network & Internet menu and
then tap Reset Wi-Fi, mobile & Bluetooth:
See also Reset Wi-Fi, Mobile & Bluetooth on page 48.
User’s Manual
65
Settings
Connected Devices
Bluetooth Settings
To create a Bluetooth® pairing between your device and another
device that has Bluetooth® capabilities, ensure that the two devices
are turned on, discoverable, and within close range.
Enable Bluetooth®
1. To turn on the Bluetooth®, tap Settings > Connected Devices and
switch right to the Bluetooth On position.
2.
66
Memor™ 10
Settings
Connect to Other Bluetooth@ Devices
1. Tap Bluetooth > Pair new device. The device automatically starts
searching for discoverable devices.
2. Flick the list and select a device. The Bluetooth pairing request
dialog box displays on the screen:
3. Make sure both devices show the same passkey and tap Pair.
4. The selected Bluetooth® device is added to the Paired Devices
list and a paired connection is established.
User’s Manual
67
Settings
Configure, Rename or Unpair Bluetooth@ Devices
Tap Settings > Bluetooth.
Select a device from the Paired Devices list and tap the settings icon
next to its name. The Paired devices window displays on the screen.
Type in the Name field to rename the paired device.
Tap FORGET to unpair:
To rename your device, tap Device name. Type in the new name.
68
Memor™ 10
Settings
Tap Rename to confirm.
User’s Manual
69
Settings
NFC
To enable enable short-range wireless data exchange, tap Settings >
Connected Devices and switch right to the NFC On position.
Android Beam is automatically enabled:
70
Memor™ 10
Settings
System
System Update
Allows you to upgrade your operative system to the latest version.
To transfer the OTA package from your PC to the Memor 10, follow
the steps below:
1. Connect the device and the PC via USB cable (see USB Connection
on page 131);
2. Scroll down the notification bar, tap the charging notification,
change to Transfer files;
3. Now the device is visible in your PC as a USB disk. Copy the OTA
package to the device Download folder;
Local Upgrade
From the Settings menu, tap System > System updates > Local
upgrade. Tap the menu icon on the top left corner of the screen and
then tap Downloads.
User’s Manual
71
Settings
Select the update package you want to install:
The OTA package would be also available if copied into
another folder. You just need to select the right folder.
NOTE
The following window displays on screen, showing information about
the device and the update package components:
72
Memor™ 10
Settings
The PROPERTIES section shows information about the device model
and OS version and the update package version.
The ACTIONS section allows to:
•
reset the device configuration after the update (see Reset the
Device on page 46).
•
force the update of all components, including those already
updated.
•
Tap Install Update. The device will reboot and a success notification
will be displayed. Tap the notification to display a report showing
the installed update components.
User’s Manual
73
Settings
74
Memor™ 10
Settings
If the update fails, the screen will display a failure message and a
report showing the reasons for failure:
During the update, ensure that:
•
battery level is more than 20% if the Memor 10 is not
connected to a power source;
NOTE
or
•
battery level is more than 15% if the Memor 10 is
connected to a power source (USB or dock).
Update is always done in recovery mode (see Recovery
Mode on page 76).
NOTE
User’s Manual
75
Settings
Recovery Mode
Recovery is an independent, runtime environment that’s included on
a separate bootable partition from the main Android OS. It contains
tools to help repair your installations as well as install official OS
updates by using a combination of key presses. Its main purpose is
to reset the device, wipe data or perform system updates when the
system crashes and the screen is unresponsive.
To enter boot menu:
1. Turn off the Memor 10 (see on page 19).
2. Press the power button and the volume up button simultaneously.
3. The device turns on and the Boot Menu appears. Select Recovery
Mode.
4. Use the volume up/down buttons to navigate the menu. You can
apply/force updates and perform a configuration reset. Press the
power key to select.
76
Memor™ 10
Settings
5. Select Reboot system now. The device reboot is complete.
In Recovery mode, you can only apply updates from
external storage (see Local Upgrade on page 71).
NOTE
User’s Manual
77
Settings
Scanner Settings
Before you start reading barcodes, use the Settings app to view and
configure all settings for the scanner.
From the applications menu, tap Settings > System > Scanner
Settings. Select the desired configuration from the following options:
78
Memor™ 10
Settings
Notification
Use it to configure the good read tone and display notification:
Good Read Duration
Sets the duration of the notification (LED, green spot or beep) the
scanner emits on a good read.
Good Read Interval
Sets the interval between each notification (LED, green spot or beep)
the scanner emits on a good read.
Good Read Number
Sets the number of notifications (LED, green spot or beep) the
scanner emits on a good read.
Enable Display Notification
Enables display notifications (toasts). If cleared, the scanner is
disabled until you launch a scanner listener application developed
using the Datalogic SDK or enable a keyboard/intent wedge.
User’s Manual
79
Settings
Good Read Audio Mode
Sets the audio tone to:
•
None
•
Beep tone
•
Audio file
If Audio file is selected, the option Good read audio file displays. Tap
it to select the file you want to use as good read ringtone.
The Notification settings do not apply to an audio file.
NOTE
Good Read Audio Volume
Sets the volume of beep tone or audio file (if enabled).
80
Memor™ 10
Settings
Good Read
Use it to enable good read notifications (LED, Green Spot):
Tap Enable good read to enable/disable notifications (main enabler),
then select the notification you want to use.
User’s Manual
81
Settings
Formatting
Allows to format the barcode text by enabling and configuring the
use of prefix, suffix, group separator and code identifier:
Label Prefix
Tap Label prefix to enter the characters you will be using as prefix.
Tap Add special to select a special character to be added in the
current cursor position:
Label Suffix
Tap Label suffix to enter the characters you will be using as suffix.
Tap Add special to select a special character to be added in the
current cursor position:
82
Memor™ 10
Settings
Group Separator Replacement
The Group Separator replacement is a non printable data separator
character (ASCII code 1D hex). Tap Group Separator replacement to
enter a string that will be used as GS data separator substituting
the standard GS character.
Tap Add special to select a special character to be added in the
current cursor position:
Remove Non-Printable Characters
Select it to remove non-printable characters from a unicode string.
User’s Manual
83
Settings
Send Code ID
Tap Send code ID to add a code identifier prefix or suffix to the
barcode string:
The AIM ID (Association for Automatic Identification and Mobility) is
an international barcode identifier. When AIM identifier before is
enabled, the AIM ID is inserted at the beginning of the decoded
barcode.
DLM identifier is a Datalogic specific character identifier.
User defined identifier is a user specific character identifier you can
set in the related symbology settings menu.
84
Memor™ 10
Settings
Scanner Options
Tap Scanner Options to customize the Memor 10 scanning behavior.
Enable Picklist
If selected, it allows you to pick and decode a barcode from multiple
barcodes printed close together, when the scan illumination
intersects more than one barcode. Only the targeted barcode will be
returned.
Enable Illumination
If selected, it causes the scanner to turn on the illumination to aid
decoding.
Enable Aim
Enables the laser aim.
User’s Manual
85
Settings
Target Mode
If enabled, when the scan button is pressed, the scanner will project
an aiming pattern to assist in centering over the barcode before
scanning. Tap Target mode to select the desired targeting behavior:
No Delay
Target mode is disabled.
Spot Timeout
Scanning takes place after a programmable time upon pressing the
scan button. Tap Target timeout to set the duration of the spot:
Release Scan
Scanning takes place after the scan button is released. Tap Release
scan timeout to set the scanning timeout after releasing the scan
button:
86
Memor™ 10
Settings
Decode Timeout
Drag the Decode timeout slider to set the maximum amount of time
the scanner attempt to decode after target timeout (in case Spot
Timeout is enabled) or after the scan button is pressed (in case
Target mode is disabled):
Enable Multi Scan
If selected, it allows you to capture multiple labels sequentially.
User’s Manual
87
Settings
Number of Required Labels
Drag the slider to indicate how many barcodes you want to collect.
Enable Single Notification
If selected, it enables indicators for each label, in order to get an
intermediate notification for each label decoded.
88
Memor™ 10
Settings
Wedge
Use it to enable or disable the keyboard wedge and the intent
wedge:
Enable Keyboard Wedge
Enables/disables the keyboard wedge mode.
User’s Manual
89
Settings
Keyboard Wedge Only on Focus
If selected, the scanner is enabled whenever a text area is in focus
and can receive text.
It provides a safer way to input keystrokes into the foreground
application, allowing to send captured data in the form of key events
only to the current text area with active keyboard input.
If this setting is not enabled, keystrokes will be always dispatched to
the foreground application.
Keyboard Wedge Input Mode
Allows to select the scanned data input mode.
Text Injection
The scanned barcode is injected into the text area.
Key Pressure
The scanned barcode is translated into keyboard strokes.
Enable Intent Wedge
Enables the broadcast of specific intents to the listening
applications. The broadcasted intent can have its custom Action,
Category and extra content fields. The scanner is enabled whenever
the intent option is flagged.
Enable Web Wedge
Enables direct data input into internet browsing applications, in the
form of a valid URL.
90
Memor™ 10
Settings
Symbology Settings
Each barcode symbology can be customized with additional settings
that may affect that specific barcode decoding. Tap Symbology
settings to configure symbology decoding options:
User’s Manual
91
Settings
Refer to the sample symbology control panels for examples of the
types of fields and options you can modify. The example below
shows the settings of a Code 128 barcode symbology:
92
Memor™ 10
Settings
Global Settings
Use this section to change symbologies settings globally and to
persist them.
Enable All Symbologies
Enables all barcode symbologies.
Disable All Symbologies
Disables all barcode symbologies.
Reset Configuration
Resets back to default scanner configuration settings.
Commit
Saves the configuration settings to a persistent storage. Any change
you make is temporary and will be lost when the system restarts,
unless you tap Commit.
User’s Manual
93
Settings
Advanced Settings
Suspend Timeout
You have two options to set the suspend timeout (see Suspend Mode
on page 33 for more information on Suspend Mode):
1. Tap Settings > System > Advanced settings:
•
Suspend on external power sets the number of seconds
without user input activity before the system is suspended
while running on external power.
•
Suspend on internal battery sets the number of seconds
without user input activity before the system is suspended
while running on battery power.
94
Memor™ 10
Settings
2. Tap Settings > Display > Sleep to set the number of seconds
without user input activity before the system is suspended
while running on either battery power or external power.
User’s Manual
95
Settings
If you use the Advanced settings page to set the auto-suspend
timeouts, the Display page’s Sleep control will display the Suspend
on internal battery if no external power is connected; if the device is
connected to an external power source (USB or dock), it will display
the Suspend on external power.
If you set the Display page’s Sleep control to a new value, it will
override both timeouts for external power and internal battery.
Charging Mode
Sets the battery level at which the device turns on automatically. The
default value is 100%.
96
Memor™ 10
Settings
Wake-Up Configuration
The default wake-up sources are the left side trigger, the right side
trigger and the pistol trigger. Tap Settings > System > Advanced
settings > Configure wake-up sources to enable/disable wake-up
sources.
Input Configuration
Lock Keyboard Input
Select Lock keyboard input to lock user input from the keyboard. The
following pop up window displays on screen asking for confirmation:
To unlock the keyboard, clear the Lock keyboard input check box.
User’s Manual
97
Settings
Key Remapping
Tap Key remapping to remap an input key, then press the key you
want to remap. You can remap the left trigger, the right trigger, the
pistol trigger, the power button and the volume control buttons.
The following window displays on screen:
•
Scancode represents the physical location of a keyboard key.
•
Keycode represents the value that is mapped to a specific key.
98
Memor™ 10
Settings
Tap Remap type to select the remapping type:
Keycode
Select Keycode to map the selected key to a new function:
•
Tap the second menu (default = DISABLE KEY) to select the
new function you want to assign to the selected key.
•
Tap the last menu (default = None) to add a modifier key (such
as Ctrl, Shift or Alt).
User’s Manual
99
Settings
Tap ADD A NEW MAPPING. A window displays showing the new
keymap.
Unicode
Select Unicode to remap a key to display Unicode characters (such as
symbol "$"):
100
Memor™ 10
Settings
Press the Back Button on the navigation bar and then tap ADD A
NEW MAPPING. A window displays showing the new keymap:
Start Activity
Select Start activity to remap a key to launch an application loaded
on your device. Tap SELECT APPLICATION:
User’s Manual
101
Settings
Select the desired application and then tap ADD A NEW MAPPING. A
window displays showing the new keymap:
View All Remapped Keys
Tap View all remapped keys to display all remapped keys:
Swipe left to edit an entry. Swipe right to remove an entry and reset
the key mapping back to default.
102
Memor™ 10
Settings
Triggers
Tap Triggers to enable/disable the trigger keys. The physical triggers
are enabled by default.
User’s Manual
103
Settings
NOTES
104
Memor™ 10
Datalogic Applications
DL Battery Manager
This application provides information about the battery features
and status, allows to configure the battery charging profile and to
log battery data.
Tap All Apps > DL Battery Manager icon, then tap the menu icon on
the top left corner of the screen, or swipe right to display the menu.
User’s Manual
105
Datalogic Applications
106
Memor™ 10
Datalogic Applications
Battery Info
The Battery Info section provides information about the battery’s
health, capacity, manufacturer, level and charging status.
Battery Info - Realtime
This window provides real-time information about the battery.
Discharge Mode
Charge Mode
The top section shows the battery level and the time left to full
discharge (when in discharge mode) and to full charge (when in
charge mode).
Status
Displays the charging status.
Source
Displays the charging source.
User’s Manual
107
Datalogic Applications
Temperature
Displays the real-time temperature.
Voltage
Displays the real-time voltage.
Current
Displays the real-time current.
Charge Left
Shows how much battery power is left.
108
Memor™ 10
Datalogic Applications
Battery Info - Lifetime
This window displays information and statistics about battery life,
health and usage over its whole life cycle.
Health
Shows the current battery health and signals potential errors.
State of Health
Shows the current battery's health level.
Total Discharge
Shows how much the battery has been used over its whole life cycle.
Full Charge
Shows the actual maximum capacity available to the user.
Temperature
Shows the maximum and minimum temperature reached by the
battery.
User’s Manual
109
Datalogic Applications
Voltage
Shows the maximum and minimum voltage reached by the battery.
Charge Current
Shows the maximum charge current.
Discharge Current
Shows the maximum discharge current.
Battery Info - Manufacturer
This window displays the model name, the type, the nominal
capacity, the serial number and the manufacture date of the battery.
110
Memor™ 10
Datalogic Applications
Charging Profile
Charging Profile - Setup
This window allows to customize the charging process according to
the user's needs and priorities.
To configure a charging profile, select 1 or 2 of the following
preferences:
•
Battery Lifetime.
•
Maximum Capacity.
•
Charging Speed.
If a third preference is selected, the system will automatically clear
the oldest option.
Tap Apply Profile to confirm.
You can configure up to 6 different charging profiles:
User’s Manual
111
Datalogic Applications
Once you have set your profile, it will be applied by default whenever
you charge the device.
You can change your profile at any time, even during charging.
112
Memor™ 10
Datalogic Applications
Data Logging
The data logging feature allows to collect, store, display and analyze
minute-by-minute battery data.
Setup
Use the Setup window to select the data you want to log.
The data logging is disabled by default. To enable it, tap Enable Data
Logging. When enabled, the log is always running, even when the
device is in suspend mode.
User’s Manual
113
Datalogic Applications
Graphs
The Graphs window provides a graphical display of selected data on a
specific date.
Select Date
114
Select Data
Memor™ 10
Datalogic Applications
Logs
The Logs window displays data details by date.
Manage
The Manage window allows to remove or export logs.
User’s Manual
115
Datalogic Applications
Select one or more logs and tap Remove to remove them. Tap OK to
confirm:
Select one or more logs and tap Export to export data and store them
for extended periods.
The selected log files will be saved in the "battery" folder in the
internal storage of your device.
116
Memor™ 10
Datalogic Applications
Application
Settings
The Settings section allows to set the value ranges that will be used
to create the graphs.
Info
The Info section displays information about the device name and
the software version.
User’s Manual
117
Datalogic Applications
Scan2Deploy
Scan2Deploy is a configuration tool that uses special barcode labels.
For more details, visit the website:
https://datalogic.github.io/dxu/scan2deploy/.
118
Memor™ 10
Datalogic Applications
Desktop Configuration Utility (DXU)
Datalogic DXU is a unified device configuration utility and firmware
update utility. DXU can connect directly to the Memor 10 that
connects either directly to a PC via USB or remotely over a network
via Wi-Fi. DXU reports information about currently connected
devices.
For more details on DXU installation, configuration and functioning,
visit the website: https://datalogic.github.io/dxu/.
User’s Manual
119
Datalogic Applications
SoftSpot™
Datalogic’s SoftSpot technology is a user-definable "floating soft
trigger" meant to provide easy access to the barcode scanner
application and other frequently used functionalities on mobile
scanning devices.
Tap the SoftSpot icon on the favorites tray or on the All Apps screen
to launch SoftSpot:
Tap the SoftSpot to scan barcodes.
Enable/Disable SoftSpot
Enables/disables the SoftSpot.
Enable SoftSpot on boot
Select it to enable SoftSpot on boot.
Enable swipe to hide
Allows to hide the SoftSpot from the screen by swiping it up in the
Notification/Status bar.
120
Memor™ 10
Datalogic Applications
Enable vibrator
Enables the vibrator.
Enable auto-transparency
If selected, the SoftSpot turns transparent automatically when it is
not used.
Maximum visibility
Sets the SoftSpot transparency level when it is used or when the
auto-transparency feature is not enabled.
Minimum visibility
Sets the SoftSpot transparency level when it is not used and the
auto-transparency feature is enabled.
Speed of transparency
Sets the lapse of time it takes for the SoftSpot to turn transparent.
User’s Manual
121
Datalogic Applications
To enable the Continuous Scan mode and scan barcodes
consecutively, tap SCAN and select the Enable on double tap check
box:
Then double-tap the SoftSpot. Tap one more time to stop laser
emission.
You can also configure the SoftSpot from the DXU. For more details
on DXU, see Desktop Configuration Utility (DXU) on page 119.
122
Memor™ 10
Tools
USB ADB Driver & USB CD-ROM
USB connection allows to read and write files on both the internal
storage memory and the external storage memory, but doesn’t
allow to install applications.
Android Debug Bridge (ADB) is a command-line utility included with
Google’s Android SDK and you can use it to control your device over
USB from a computer, copy files back and forth, install and uninstall
apps and run shell commands.
Use the USB CD-ROM to install the Windows drivers and then
launch ADB to run a shell using the following tool command prompt:
Start/Datalogic Android/Support/Device.
User’s Manual
123
Tools
SDK Add-on
SDK add-on is a library which extends the Android SDK and
development tools.
For more information and instructions to install SDK Add-on,
Android™ Studio and Android SDK, visit the website
https://datalogic.github.io/quick-start/.
Install ADB Driver
1. Install
Android
SDK
Manager
(visit
the
website
https://datalogic.github.io/quick-start/ for further information).
2. Download and install the Google USB Driver
https://developer.android.com for further information).
(see
Before installing the Google USB Driver, ensure you have
installed the Datalogic plug-in.
NOTE
3. In order to use ADB with your device connected over USB, you
must enable USB debugging in the device system settings. To
enable Android Developer options, go to Settings > System >
About phone and tap on the Build Number section 7 times. After
the 7th tap, the Developer options will be unlocked and available.
Go back to Settings > System and tap Developer options. Select
USB debugging:
124
Memor™ 10
Tools
4. Use a CD-Rom Installer to debug the ADB driver and read the
Memor 10 as an ADB device.
Create a New Application based on Datalogic
SDK Add-on with Android Studio
For information and instructions to configure Datalogic SDK Add-on
in Android Studio, refer to the website
https://datalogic.github.io/quick-start/android-studio.html.
Datalogic SDK
For information on the Datalogic SDK APIs, visit the web site:
https://datalogic.github.io/android-sdk-docs/reference/packages.
html.
User’s Manual
125
Tools
NOTES
126
Memor™ 10
Data Capture
The Memor 10 has an integrated imager that collects data by
scanning bar codes.
The imager uses digital camera technology to take a digital picture
of a bar code, the image is stored in memory and software decoding
algorithms are executed to extract the data from the image.
See Scanner Settings on page 78 for instructions on configuring the
scanner settings.
Models with Laser Aiming System
To scan a bar code symbol:
1. Point the scan window at the barcode from a distance within the
reading range.
2. Press one of the scan triggers. The imager projects a laser
aiming pattern similar to those used on cameras. The aiming
pattern is used to position the barcode or object within the field
of view.
User’s Manual
127
Data Capture
3. Center the symbol in any orientation within the aiming pattern.
Ensure the entire symbol is within the rectangular area formed
by the brackets in the aiming pattern, then either wait for the
timeout or release the scan trigger to capture the image. A red
beam illuminates the symbol, which is captured and decoded.
Linear Bar Code
2D Matrix Symbol
If the scan has been successful:
•
If enabled, the good read beep plays.
•
If enabled, the GreenSpot projects a green spot onto the bar
code image.
•
If enabled, the good read indicator positioned at the top left
side of the display glows solid green.
128
Memor™ 10
Data Capture
Models with LED Aiming System
To scan a bar code symbol:
1. Point the scan window at the bar code.
2. Press one of the scan triggers. A blue-violet spot illuminates the
symbol, which is captured and decoded.
If the scan has been successful:
•
If enabled, the good read beep plays.
•
If enabled, the GreenSpot projects a green spot onto the bar
code image.
•
If enabled, the good read indicator positioned at the top left
side of the display glows solid green.
User’s Manual
129
Data Capture
NOTES
130
Memor™ 10
Connections
USB Connection
USB Direct Connection
You can use the provided USB Type-C cable to directly connect the
Memor 10 to a host computer and transfer data through the USB
interface.
Host Computer
Memor 10
USB Type-C cable
1. Connect the device to the host PC via USB cable.
2. Scroll down the notification bar, tap the charging notification
and change to Transfer files.
3. The device is now visible in your PC as a USB disk. You can start
the data transfer.
Connection through the cable complies to USB Type-C
standard.
NOTE
User’s Manual
131
Connections
WLAN Connection
The Memor 10 has a 802.11a/b/g/n/ac WLAN (Wireless Local Area
Network) radio and can communicate with other 802.11a/b/g/n,/ac
Wi-Fi compliant products including access points, workstations via
PC card adapters and other wireless portable devices.
Memor 10
Memor 10
Access Point
Host
NOTE
132
Area coverage and radio performance may vary, due to
environmental conditions, access point types or
interference caused by other devices (microwave ovens,
radio transmitters, etc.).
Memor™ 10
Connections
WWAN Connection
The Memor 10 enhances your connectivity solutions giving you an
opening to an international wireless infrastructure that is the global
standard. It is optimized for the following two-way communications:
•
Voice: GSM voice data (dial-up)
•
Data: Available speed depends on the wireless network carrier
and their supported packet-data technology in addition to
network conditions.
The Memor 10 supports the following 3G bands:
•
EU (ROW) : WCDMA 2100/850/900, CDMA2000 BC0
•
US: WCDMA 2100/1900/1700/850/900, CDMA2000 BC0/1.
The Memor 10 supports the following LTE bands:
•
EU (ROW) sku: FDD_LTE B1/3/5/7/8/20/28, TDD_LTE
B38/39/40/41
•
US sku: FDD_LTE B2/4/5/7/12/13/17/25/26.
In order to use a WWAN Connection you have to install a SIM Card
(Install the MircoSIM Card on page 28).
User’s Manual
133
Connections
NOTE
NOTE
134
You can use the WWAN radio for simultaneous voice and
data communication on a UMTS (3G) network only. On a
GSM network, if you want to communicate over the phone
(voice), you cannot send data. If you want to send data, you
cannot use the phone.
Area coverage and 3G performance may vary, due to
environmental conditions, access point types or
interference caused by other devices (microwave ovens,
radio transmitters, etc.).
Memor™ 10
Connections
WPAN Connection
The Memor 10 can communicate with a Bluetooth® device, such as a
printer, within a range of 10 m, using the on-board Bluetooth®
module.
NOTE
In order to extend battery life, the Bluetooth® module is
off by default. If you need to have Bluetooth® working, the
module must be powered on (see Bluetooth Settings on
page 66).
NOTE
Suspending the terminal powers off the Bluetooth® radio
and drops the Bluetooth® connection. When the terminal
resumes, it takes approximately 10 seconds for the
Bluetooth® radio driver to re-initialize the radio.
User’s Manual
135
Connections
NOTE
136
Area coverage and Bluetooth® radio performance may vary,
due to environmental conditions or interference caused by
other devices (microwave ovens, radio transmitters, etc.).
Memor™ 10
Connections
Near Field Communication (NFC)
NFC technology allows short-range, wireless data transfer between
the terminal and NFC tags or other NFC enabled devices placed in
close proximity to the back of the terminal.
Memor 10 support the following modes of operation:
•
NFC tag reader/writer mode: the terminal reads and/or
writes digital information from or to an NFC tag.
•
Peer-to-Peer (P2P) mode: the terminal uses Android Beam
and/or Bluetooth@ technology to transfer screen content
(e.g., a picture, web page url, or file) between NFC enabled
devices.
•
NFC card emulation mode - The terminal emulates an NFC
card (smart card) that an external card reader can access.
Read NFC Tags
1. Make sure NFC is enabled (see NFC on page 70).
2. Hold the NFC tag close to the back of the terminal.
3. When an NFC tag is recognized, the terminal emits a sound and
the tag data displays on the terminal screen.
Suspend mode and the screen lock temporarily turns the
NFC radio off.
NOTE
User’s Manual
137
Connections
Wireless and Radio Frequencies Warnings
Use only the supplied or an approved replacement
antenna. Unauthorized antennas, modifications or
attachments could damage the product and may
violate laws and regulations.
WARNING
Most modern electronic equipment is shielded from RF
signals. However, certain electronic equipment may not
be shielded against the RF signals generated by
Memor 10.
Datalogic recommends persons with pacemakers or
other medical devices to follow the same
recommendations provided by Health Industry
Manufacturers Associations for mobile phones.
Persons with pacemakers:
•
Should ALWAYS keep this device more than
twenty five (25) cm from their pacemaker and/or
any other medical device;
•
Should not carry this device in a breast pocket;
•
Should keep the device at the opposite side of the
pacemaker and/or any other medical device;
•
Should turn this device OFF or move it immediately AWAY if there is any reason to suspect that
interference is taking place.
•
Should ALWAYS read pacemaker or any other
medical device guides or should consult the manufacturer of the medical device to determine if it is
adequately shielded from external RF energy.
In case of doubt concerning the use of wireless devices
with an implanted medical device, contact your doctor.
138
Memor™ 10
Connections
WARNING
WARNING
WARNING
WARNING
User’s Manual
Turn this device OFF in health care facilities when any
regulations posted in these areas instruct you to do
so. Hospitals or health care facilities may use
equipment that could be sensitive to external RF
energy.
RF signals may affect improperly installed or
inadequately shielded electronic systems in motor
vehicles. Check with the manufacturer or its
representative regarding your vehicle. You should also
consult the manufacturer of any equipment that has
been added to your vehicle.
An air bag inflates with great force. DO NOT place
objects, including either installed or portable wireless
equipment, in the area over the air bag or in the air bag
deployment area. If a vehicle’s wireless equipment is
improperly installed and the air bag inflates, serious
injury could result.
Turn off the device when in any area with a potentially
explosive atmosphere. Observe restrictions and follow
closely any laws, regulations, warnings and best
practices on the use of radio equipment near fuel
storage areas or fuel distribution areas, chemical
plants or where any operation involves use of
explosive materials. Do not store or carry flammable
liquids, explosive gases or materials with the device or
its parts or accessories. Areas with a potentially
explosive atmosphere are often, but not always,
clearly marked or shown. Sparks in such areas could
cause an explosion or fire, resulting in injury or even
death.
139
Connections
NOTES
140
Memor™ 10
Technical Features
Technical Data
Physical Characteristics
Dimensions
15.5 x 7.8 x 1.87 cm / 6.1 x 3.07 x 0.73 in
Weight
With Battery: 285.0 g / 10.0 oz
Display
5 inch IPS HD resolution 720 x 1280;
LED backlight; Touch Screen: 5 points multi-touch
capacitive panel with Dragontrail hardened glass
Keys
Physical Keys: 2 side scan keys; Power On/Off;
Volume Up/Down; 3 user programmable Android™ keys
Interfaces
Interfaces
High Speed USB 2.0 Host and Client with USB Type C
connector
Electrical
Battery
Replaceable battery pack with rechargeable
Lithium-Polymer batteries; 3.8v; 4,100 mAh (15.6
Watt-hours)
Wireless Charging
Qi Compliant; 10 Watt fast charging
User’s Manual
141
Technical Features
Sensors
Vibration
Software programmable for duration and intensity
Accelerometer
3-Axis accelerometer to detect orientation
Gyroscope
Senses angular velocity
Ambient Light
Auto adjusts display backlight
Proximity
Auto deactivates display when close to face
Environmental
Temperature
- 20° to 50° C (32° to 122° F)
Drop Resistance
Withstands drops from 1.5 m/ 5.0 ft onto concrete
(with rubber boot); Withstands drops from 1.2 m/ 4.0 ft
onto concrete (without rubber boot). Tested onto
steel/concrete according to IEC 68-2-32 Method 2 and
MIL STD 810G Transit drop test.
Tumbles
Withstands 1000 hits from 0.5 m/ 1.6 ft and 250 hits
from 1.0 m / 3.2 ft per IEC 600-2-32 with rubber boot;
Withstands 600 hits from 0.5 m/ 1.6 ft per IEC 600-2-32
without rubber boot
Particulate and Water
Sealing
IP65
Chemical Resistance
Chemical cleanser and industrial oil resistant (both
Standard and Healthcare models)
Healthcare Cleanable
Isopropyl Alcohol, Hydrogen Peroxide, Clorox® Bleach;
applicable for both the device and cradles
142
Memor™ 10
Technical Features
Wireless Communications
Local Area Network
(WLAN)
IEEE 802.11 a/b/g/n/ac and 802.11 k/r/v;
Frequency range: Country dependent, typically
2.4GHz and 5GHz bands
Personal Area Network
(PAN)
Bluetooth wireless technology v4.2 (Classic
Bluetooth wireless technology and BLE)
NFC Communication
Support for the following standards: ISO14443-4
(type-A, type-B); ISO15693; Mifare; Felica
WWAN/Cellular
LTE-Advanced/4G+; Cat 6 (coming soon)
System
Operating System
Android v8.1 with or without GMS
Expansion Slots
Micro-SD card slot: Compatible with Micro SD-HC
cards; Data transfer up to 48 Mbps;
User-accessible
Memory
System RAM: 3 GB; eMMC Flash: 32 GB
Microprocessor
2 GHz Octa-core
Real-Time Clock
Time and date stamping under software control
Safety & Regulatory
Agency Approvals
The product meets necessary safety and
regulatory approvals for its intended use
Enviromental Compliance
Complies to EU RoHS
Warranty
Warranty
User’s Manual
1-Year Factory Warranty
143
Technical Features
Reading Performance
Image Sensor
DE2101: 640 x 480 pixels
DE2102: 1280 x 800 pixels
Frame Rate
DE2101: 100 Frames/Sec
DE2102: 60 Frames/Sec
Light Source
DE2101: Aiming: Blue LED; Illumination: White LEDs
DE2102: Aiming: 650 nm VLD; Illumination: Software
configurable for White or Red LEDs
Print Contrast Ratio
25%
Field Of View
DE2101: 48°H x 34°V
DE2102: 42°H x 26°V
Reading Angle
Pitch: +/- 60°; Roll (Tilt): +/-180°; Skew (Yaw): +/- 60°
Reading Indicators
Datalogic ’Green Spot’ Technology for visual good-read
confirmation (Optional)
Resolution (Maximum)
1D linear: 2.5 mils (DE2102) -4 mils (DE2101)
Data Matrix: 6 mils (DE2102) - 7.5 mils (DE2101)
PDF417: 3 mils (DE2102) - 6.6 mils (DE2101)
MDM
SOTI MobiControl, VMWare AirWatch, Wavelink
Avalanche, 42Gears SureMDM
Terminal Emulation
StayLinked SmartTE, Wavelink Velocity
144
Memor™ 10
Technical Features
Reading Ranges
Typical Depth of Field
Minimum distance determined by symbol length and
scan angle.
Printing resolution, contrast, and ambient light
dependent.
1D / 2D Codes: DE2101
5 mils Code 39: 5.0 - 19.0 cm/ 2.0 to 7.5 in
10 mils Data Matrix: 5.0 - 13.0 cm / 2.0 to 5.1 in
13 mils EAN-13: 4.0 - 33.0 cm / 1.6 to 13.0 in
20 mils Code 39: up to 46.0 cm / up to 18.1 in
1D / 2D Codes: DE2102
3 mils Code 39: 8.0 - 18.0 cm / 3.1 to 7.1 in
5 mils Code 39: 4.0 - 29.0 cm / 1.6 to 11.4 in
10 mils Data Matrix: 5.0 - 26.0 cm / 2.0 to 10.2 in
13 mils EAN-13: 4.5 to 55.0 cm / 1.7 to 21.7 in
15 mils Data Matrix: 5.5 - 35.0 cm / 2.2 to 13.8 in
20 mils Code 39: up to 90.0 cm / up to 35.4 in
Decoding Capability
1D/Linear Codes
Auto discriminates all standard 1D codes including
GS1 DataBar™ linear codes
2D Codes
Aztec Code; China Han Xin Code; Data Matrix;
MaxiCode; Micro QR Code; QR Code
Postal Codes
Australian Post; British Post; China Post; IMB;
Japanese Post; KIX Post; Korea Post; Planet Code;
Postnet; Royal Mail Code (RM4SCC)
Stacked Codes
EAN/JAN Composites; GS1 DataBar Composites; GS1
DataBar Expanded Stacked; GS1 DataBar Stacked;
GS1 DataBar Stacked Omnidirectional; MacroPDF;
MicroPDF417; PDF417; UPC A/E Composites
User’s Manual
145
Technical Features
Software
Applications
Datalogic’s SoftSpot technology for configurable soft
triggers; Supports Datalogic’s Queue Busting app;
Pre-licensed device and browser lockdown powered
by 42Gears; Enterprise class PTT offered by Zello
Provisioning
Android Zero Touch enrollment and QR Code or NFC
Bump provisioning
Configuration and
Maintenance
Datalogic DXU for device configuration and firmware
upgrade from PC
Development
Java and Xamarin SDK available
146
Memor™ 10
Test Codes
High Density Codes - 0.25 mm (10 mils)
Code 39
17162
Interleaved 2/5
0123456784
Code 128
test
User’s Manual
147
Test Codes
High Density Codes (continued) - 0.25 mm (10 mils)
80%
EAN 13
80%
EAN 8
148
Memor™ 10
Test Codes
Medium Density Codes - 0.38 mm (15 mils)
Code 39
17162
Interleaved 2/5
0123456784
Code 128
test
User’s Manual
149
Test Codes
Medium Density Codes (continued) - 0.38 mm (15 mils)
100%
EAN 13
100%
EAN 8
150
Memor™ 10
Test Codes
Low Density Codes - 0.50 mm (20 mils)
Code 39
17162
,
,
Interleaved 2/5
0123456784
,
,
Code 128
test
User’s Manual
151
Test Codes
Low Density Codes (continued) - 0.50 mm (20 mils)
120%
EAN 13
120%
EAN 8
152
Memor™ 10
Test Codes
2D Codes
Datamatrix ECC200
Example
Inverse Datamatrix ECC200
Example
User’s Manual
153
Test Codes
NOTES
154
Memor™ 10
Maintenance
Cleaning
Periodically clean the Memor 10 Healthcare device and the docks
using a soft cloth slightly dampened with only water, or one of the
following allowed cleaning agents:
•
Sani-Cloth® HB, Sani-Cloth® Plus,
•
Super Sani-Cloth®
•
Hepacide Quat II
•
Alcohol Wipes 70%
•
CaviWipesTM
•
Virex® 256
•
409® Glass and Surface Cleaner
•
Windex®
•
Clorox® Bleach
•
100% Gentle dish soap and water.
Do not use any other cleaning agents (e.g. different alcohol, abrasive
or corrosive products, solvents) or abrasive pads to clean the device.
Do not spray or pour liquids directly onto the device.
The device is IP65 waterproof.
User’s Manual
155
Maintenance
Ergonomic Recommendations
CAUTION
In order to avoid or minimize the potential risk of
ergonomic injury follow the recommendations below.
Consult with your local Health & Safety Manager to
ensure that you are adhering to your company’s safety
programs to prevent employee injury.
•
Reduce or eliminate repetitive motion
•
Maintain a natural position
•
Reduce or eliminate excessive force
•
Keep objects that are used frequently within easy reach
•
Perform tasks at correct heights
•
Reduce or eliminate vibration
•
Reduce or eliminate direct pressure
•
Provide adjustable workstations
•
Provide adequate clearance
•
Provide a suitable working environment
•
Improve work procedures.
156
Memor™ 10
Safety and Regulatory Information
Read this manual carefully before performing any type of
connection to the Memor 10 PDA.
NOTE
The user is responsible for any damage caused by
incorrect use of the equipment or by inobservance of the
indication supplied in this manual.
General Safety Rules
•
Before using the device and the battery pack, read carefully
the chapter Battery on page 14.
•
Use only the components and accessories supplied by the
manufacturer for the specific Memor 10 being used.
•
Do not attempt to disassemble the Memor 10 PDA, as it does
not contain parts that can be repaired by the user. Any
tampering will invalidate the warranty.
•
When replacing the battery pack or at the end of the operative
life of the Memor 10 PDA, disposal must be performed in
compliance with the laws in force in your jurisdiction.
•
Do not submerge the Memor 10 in liquid products.
•
For further information or support, refer to this manual and to
the Datalogic web site: www.datalogic.com.
User’s Manual
157
Safety and Regulatory Information
Power Supply
The device is intended to be supplied by a self-contained
rechargeable Lithium Ion battery pack (UL listed LPS/SELV power
source) and/or by UL Listed/CSA Certified Power Unit LPS/SELV
power source which supplies power directly to the unit via the
TYPE-C USB connector of the cable. The device could be also used
with Certified Accessories (Dock/Cradle) which supply Wireless
power. The Dock/Cradle accessories are intended to be supplied by a
UL Listed/CSA Certified Power Unit LPS/SELV which supplies power
via the power connector of the cable.
Any changes or modifications to equipment, not expressly approved
by Datalogic could void the user's authority to operate the
equipment.
Connection through the cable complies to USB Type-C
standard.
The adapter must be installed near the equipment and
CAUTION must be easily accessible.
The device must operate at an ambient temperature
between -20 - 50° C.
LED Class
LED illuminator integrated in the imager engine is classified as
“EXEMPT RISK GROUP” according to IEC62471.
Audio Safety
To prevent possible hearing damage, do not listen at
high volume levels for long periods.
158
Memor™ 10
Safety and Regulatory Information
Marking and European Economic Area
(EEA)
In radio systems configured with mobile computers and access
points, the frequencies to be used must be allowed by the spectrum
authorities of the specific country in which the installation takes
place. Be absolutely sure that the system frequencies are correctly
set to be compliant with the spectrum requirements of the country.
The Radio modules used in this product automatically adapt to the
frequencies set by the system and do not require any parameter
settings.
Statement of Compliance
Hereby, Datalogic S.r.l. declares that the radio equipment type
Memor 10 is in compliance with Directive 2014/53/EU. The full text
of the EU declaration of conformity is available at the following
internet address: www.datalogic.com.
BG
С настоящото Datalogic S.r.l. декларира, че този тип
радиосъоръжение Memor 10 е в съответствие с Директива
2014/53/ЕС. Цялостният текст на ЕС декларацията за съответствие
може да се намери на следния интернет адрес: www.datalogic.com.
ES
Por la presente, Datalogic S.r.l. declara que el tipo de equipo
radioeléctrico Memor 10 es conforme con la Directiva 2014/53/UE.
El texto completo de la declaración UE de conformidad está
disponible en la dirección Internet siguiente: www.datalogic.com.
User’s Manual
159
Safety and Regulatory Information
CS
Tímto Datalogic S.r.l. prohlašuje, že typ rádiového zařízení Memor 10
je v souladu se směrnicí 2014/53/EU. Úplné znění EU prohlášení o
shodě je k dispozici na této internetové adrese: www.datalogic.com.
DE
Hermed erklærer Datalogic S.r.l., at radioudstyrstypen Memor 10 er i
overensstemmelse med direktiv 2014/53/EU.
EU-overensstemmelseserklæringens fulde tekst kan findes på
følgende internetadresse: www.datalogic.com.
ET
Käesolevaga deklareerib Datalogic S.r.l., et käesolev raadioseadme
tüüp Memor 10 vastab direktiivi 2014/53/EL nõuetele. ELi
vastavusdeklaratsiooni täielik tekst on kättesaadav järgmisel
internetiaadressil: www.datalogic.com.
EL
Με την παρούσα ο/η Datalogic S.r.l., δηλώνει ότι ο ραδιοεξοπλισμός
Memor 10 πληροί την οδηγία 2014/53/ΕΕ. Το πλήρες κείμενο της
δήλωσης συμμόρφωσης ΕΕ διατίθεται στην ακόλουθη ιστοσελίδα στο
διαδίκτυο: www.datalogic.com.
EN
Hereby, Datalogic S.r.l. declares that the radio equipment type
Memor 10 is in compliance with Directive 2014/53/EU. The full text
of the EU declaration of conformity is available at the following
internet address: www.datalogic.com.
FR
Le soussigné, Datalogic S.r.l., déclare que l'équipement
radioélectrique du type Memor 10 est conforme à la directive
2014/53/UE. Le texte complet de la déclaration UE de conformité est
disponible à l'adresse internet suivante: www.datalogic.com.
160
Memor™ 10
Safety and Regulatory Information
HR
Datalogic S.r.l. ovime izjavljuje da je radijska oprema tipa Memor 10
u skladu s Direktivom 2014/53/EU. Cjeloviti tekst EU izjave o
sukladnosti dostupan je na sljedećoj internetskoj adresi:
www.datalogic.com.
IT
Il fabbricante, Datalogic S.r.l., dichiara che il tipo di apparecchiatura
radio Memor 10 è conforme alla direttiva 2014/53/UE. Il testo
completo della dichiarazione di conformità UE è disponibile al
seguente indirizzo Internet: www.datalogic.com.
LV
Ar šo Datalogic S.r.l. deklarē, ka radioiekārta Memor 10 atbilst
Direktīvai 2014/53/ES. Pilns ES atbilstības deklarācijas teksts ir
pieejams šādā interneta vietnē: www.datalogic.com.
LT
Aš, Datalogic S.r.l., patvirtinu, kad radijo įrenginių tipas Memor 10
atitinka Direktyvą 2014/53/ES. Visas ES atitikties deklaracijos
tekstas prieinamas šiuo interneto adresu: www.datalogic.com
HU
Datalogic S.r.l. igazolja, hogy a Memor 10 típusú rádióberendezés
megfelel a 2014/53/EU irányelvnek. Az EU-megfelelőségi
nyilatkozat teljes szövege elérhető a következő internetes címen:
www.datalogic.com.
MT
B'dan, Datalogic S.r.l. niddikjara li dan it-tip ta' tagħmir tar-radju
Memor 10 huwa konformi mad-Direttiva 2014/53/UE. It-test kollu
tad-dikjarazzjoni ta' konformità tal-UE huwa disponibbli f'dan
l-indirizz tal-Internet li ġej: www.datalogic.com.
User’s Manual
161
Safety and Regulatory Information
PL
Datalogic S.r.l. niniejszym oświadcza, że typ urządzenia radiowego
Memor 10 jest zgodny z dyrektywą 2014/53/UE. Pełny tekst
deklaracji zgodności UE jest dostępny pod następującym adresem
internetowym: www.datalogic.com.
PT
O(a) abaixo assinado(a) Datalogic S.r.l. declara que o presente tipo de
equipamento de rádio Memor 10 está em conformidade com a
Diretiva 2014/53/UE. O texto integral da declaração de conformidade
está
disponível
no
seguinte
endereço
de
Internet:
www.datalogic.com.
RO
Prin prezenta, Datalogic S.r.l. declară că tipul de echipamente radio
Memor 10 este în conformitate cu Directiva 2014/53/UE. Textul
integral al declara?iei UE de conformitate este disponibil la
următoarea adresă internet: www.datalogic.com.
SK
Datalogic S.r.l. týmto vyhlasuje, že rádiové zariadenie typu Memor 10
WWAN je v súlade so smernicou 2014/53/EÚ. Úplné EÚ vyhlásenie o
zhode je k
dispozícii na tejto internetovej adrese:
www.datalogic.com.
SL
Datalogic S.r.l. potrjuje, da je tip radijske opreme Memor 10 WWAN
skladen z Direktivo 2014/53/EU. Celotno besedilo izjave EU o
skladnosti je na voljo na naslednjem spletnem naslovu:
www.datalogic.com.
FI
Datalogic S.r.l. vakuuttaa, että radiolaitetyyppi Memor 10 WWAN on
direktiivin 2014/53/EU mukainen.
162
Memor™ 10
Safety and Regulatory Information
EU-vaatimustenmukaisuusvakuutuksen täysimittainen teksti on
saatavilla seuraavassa internetosoitteessa: www.datalogic.com.
SV
Härmed försäkrar Datalogic S.r.l. att denna typ av radioutrustning
Memor 10 WWAN överensstämmer med direktiv 2014/53/EU.Den
fullständiga texten till EU-försäkran om överensstämmelse finns på
följande webbadress: www.datalogic.com.
NBTC Statement
เครืองโทรคมนาคมและอุปกรณ์นี มีความสอดคล้ องตามข้ อกําหนดของ กทช.
This telecommunication equipment is in compliance with NTC
requirements.
User’s Manual
163
Safety and Regulatory Information
Information for the User
Restrictions of use in all EU Countries. This device is restricted to indoor use when
operated in the 5.15 to 5.25 GHz frequency range.
BG
DE
EN
IT
HU
PT
SL
ES
ET
FR
LV
MT
RO
FI
CS
EL
HR
LT
PL
SK
SV
ENGLISH
Contact the competent authority responsible for the management of
radio frequency devices of your country to verify any possible
restrictions or licenses required.
ITALIANO
Contatta l'autorità competente per la gestione degli apparati a radio
frequenza del tuo paese, per verificare eventuali restrizioni o licenze.
164
Memor™ 10
Safety and Regulatory Information
FRANÇAIS
Contactez l'autorité compétente en la gestion des appareils à radio
fréquence de votre pays pour vérifier d'éventuelles restrictions ou
licences.
DEUTSCH
Wenden Sie sich an die für Radiofrequenzgeräte zuständige
Behörde Ihres Landes, um zu prüfen ob es Einschränkungen gibt,
oder eine Lizenz erforderlich ist.
ESPAÑOL
Contacta la autoridad competente para la gestión de los dispositivos
de radio frecuencia de tu país, para verificar cualesquiera
restricciones o licencias posibles requerida.
User’s Manual
165
Safety and Regulatory Information
CAUTION
This device has been tested and found to comply with the
limits pursuant to EN 303417. These limits are designed to
provide
reasonable
protection
against
harmful
interference in a residential installation. This equipment
generates uses and can radiate radio frequency energy
and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular istallation.
If this equipment causes harmful interference to other
electronic equipments, which can be determined by turning
the equipment OFF and ON, the user is encouraged to
correct the interference with one or more of the following
measures:
•
Reorient or relocate the equipment
•
Increase the distance
To prevent the temperature from getting too high, don't
place any metal objects between the TX surface and the RX
surface.
166
Memor™ 10
Safety and Regulatory Information
Radio Type Description
Frequency Maximum Output Power
Radio
Technology
Transmit
Frequency
Transmit Power
Receive
Frequency
GSM 900
B80 MHz
to 915 MHz
GSM/GPRS:32.2 dBm 925 MHz
EDGE:24.7 dBm
to 960 MHz
GSM1800
1710 MHz
to 1785 MHz
GSM/GPRS:29.7 dBm 1805 MHz
EDGE:23.6 dBm
to 1880 MHz
WCDMA band I
1920 MHz
to 1980 MHz
22.S dBm
2110 MHz
to 2170 MHz
WCDMA bandVIII
880 MHz
to 915 MHz
22.83 dBm
935 MHz
to 960 MHz
LTE FDD1
1920 MHz
to 1980 MHz
22.65 dBm
2110 MHz
to 2170 MHz
LTE FDD3
1710 MHz
to 1785 MHz
22.97 dBm
1805 MHz
to 1880 MHz
LTE FDD7
2500 MHz
to 2570 MHz
22.96 dBm
2620 MHz
to 2690 MHz
LTE FDD8
880 MHz
to 915 MHz
23.21 dBm
925 MHz
to 960 MHz
LTE FDD20
832 MHz
to 862 MHz
22.82 dBm
791 MHz
to 821 MHz
LTE FDD28
703 MHz
to 748 MHz
22.75 dBm
758 MHz
to 803 MHz
User’s Manual
167
Safety and Regulatory Information
Radio
Technology
Transmit
Frequency
Transmit Power
Receive
Frequency
LTETDD38
2570 MHz
to 2620 MHz
22.69 dBm
2570 MHz
to 2620 MHz
LTETDD40
23 MHz to
2400MHz
22.64 dBm
2300 MHz
to 2400 MHz
BT4.2
2402 MHz
to 2480 MHz
9.62 dBm
2402 MHz
to 2480 MHz
BLE
2402 MHz
to 2480 MHz
4.BS dBm
2402 MHz
to 2480 MHz
2.4G Wi-Fi
2412 MHz
to 2472 MHz
16.85 dBm
2412 MHz
to 2472 MHz
SG Wi-Fi
5180 MHz
to 5320 MHz
17.49 dBm
5180 MHz
to 5320 MHz
SG Wi-Fi
5500 MHz
to 5700 MHz
18.22 dBm
5500 MHz
to 5700 MHz
NFC
13.56 MHz
/
13.56 MHz
GPS
/
/
1575.42 MHz
GLONASS
/
/
1589.74 MHz
BEIDOU
/
/
WLCRX
168
/
/
1561.098 MHz
119 KHz to 140
KHz
Memor™ 10
Safety and Regulatory Information
FCC Compliance
NOTICE:
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including
interference that may cause undesired operation.
FCC ID: U4GDL35US
NOTE: Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate
the equipment.
NOTE: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the
FCCRules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
User’s Manual
169
Safety and Regulatory Information
•
Consult the dealer or an experienced radio/TV technician for
help.
Body-worn Operation
This device was tested for typical body-worn operations. To comply
With RF exposure requirements, a minimum separation distance of
1.0 cm must be maintained between the user’s body and the
handset, including the antenna. Third-party belt-clips, holsters, and
similar accessories used by this device should not contain any
metallic components. Body-worn accessories that do not meet these
requirements may not comply with RF exposure requirements and
should be avoided.
Specific Absorption Rate (SAR) information:
This wireless phone meets the government's requirements for
exposure to radio waves. The guidelines are based on standards that
were developed by independent scientific organizations through
periodic and thorough evaluation of scientific studies. The standards
include a substantial safety margin designed to assure the safety of
all persons regardless of age or health.
RF Exposure Information and Statement:
This device was tested for handheld and body-worn conditions,
according to international Standards covering human exposure to
electromagnetic fields from radio devices. The SAR limit
recommended by the Council of the European Union is 2.0W/kg for
trunk/head as averaged over any 10g tissue according to the EN
50360:2017 and EN 50566:2017. The Memor 10 has also been tested
against this SAR limit. The highest SAR value reported under this
standard during product certification for use at the ear is 0.514W/kg
and when properly worn on the body is 1.461W/kg. This device was
tested for typical body-worn operations. To maintain compliance
with the RF exposure requirements in Europe, use accessories that
170
Memor™ 10
Safety and Regulatory Information
maintain a 5mm separation distance between the user's body and
the handset, including the antenna. The use of belt clips, holsters
and similar accessories should not contain metallic components in
its assembly. The use of body-worn accessories that do not meet
these requirements may not comply with RF exposure requirements
and should be avoided.
FCC RF Exposure Information and Statement:
The SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of
tissue. Device types: U4GDL35US has also been tested against this
SAR limit. The highest SAR value reported under this standard
during product certification for use at the ear is 0.801W/kg and
when properly worn on the body is 1.172W/kg and as hotspot is
1.283W/kg. This device was tested for typical body-worn operations
with the back of the handset kept 1cm from the body. To maintain
compliance with FCC RF exposure requirements, use accessories
that maintain a 1cm separation distance between the user's body
and the back of the handset. The use of belt clips, holsters and
similar accessories should not contain metallic components in its
assembly. The use of accessories that do not satisfy these
requirements may not comply with FCC RF exposure requirements,
and should be avoided.
The device for operation in the band 5150-5250 MHz is only for
indoor use to reduce the potential for harmful interference to
co-channel mobile satellite systems.
In radio systems configured with mobile computers and access
points, the frequencies to be used must be allowed by the spectrum
authorities o fthe specific country in which the installation takes
place. Be absolutely sure that the system frequencies are correctly
set to be compliant with the spectrum requirements of the country.
The Radio modules used in this product automatically adapt to the
frequencies set by the system and do not require any parameter
settings.
User’s Manual
171
Safety and Regulatory Information
ISED Compliance
NOTICE:
This device complies with Industry Canada licence-exempt RSS
standard(s).
Operation is subject to the following two conditions:
(1)this device may not cause harmful interference, and
(2)this device must accept any interference received, including
interference that may cause undesired operation.
CAUTION:
(i) the device for operation in the band 5150-5250 MHz is only for
indoor use to reduce the potential for harmful interference to
co-channel mobile satellite systems;
(ii) high-power radars are allocated as primary users (i.e. priority
users) of the bands 5250-5350MHz and 5650-5850 MHz and that
these radars could cause interference and/or damage to LE-LAN
devices.
The highest SAR value reported under this standard during product
certification for use at the ear is 0.801W/kg and when properly worn
on the body is 1.148W/kg ans as hotspot is 1.283W/kg.
ISED Radiation Exposure Statement
This
device
is
compliant
with
SAR
for
general
population/uncontrolled exposure limits in RSS-102 and has been
tested in accordance with the measurement methods and
procedures specified in IEEE 1528 and IEC 62209. This equipment
should be installed and operated with a minimum distance of 0.39
in(10mm) between the radiator and you body. This device and its
172
Memor™ 10
Safety and Regulatory Information
antennas must not be co-located or operated in conjunction with
and other antenna or transmitter.
Cet appareil est conforme aux limites d'exposition DAS incontrôlée
pour la population générale de la norme CNR-102 Innovation.
Scinces et Développement économique Canada et a été testé en
conformité avec les méthodes de mesure de procédures spécifiées
dans IEEE 1528 et IEC 62209. Cet appareil doit être installé et utilisé
avec une distance minimale de 10mm entre I'émetteur et votre
corps. Cet appareil et sa ou ses antennes ne doivent pas être
co-localisés ou fonctionner en conjonction avec tout autre antenne
ou transmetteur.
User’s Manual
173
Safety and Regulatory Information
Waste Electrical and Electronic
Equipment (WEEE)
Information for the user
At the end of its useful life, the product marked with the crossed out
wheeled wastebin must be disposed of separately from urban waste.
For more detailed information about disposal, contact the supplier
that provided you with the product in question or consult the
dedicated section at the website http://www.datalogic.com.
Informazione per gli utenti
L’apparecchiatura che riporta il simbolo del bidone barrato deve
essere smaltita, alla fine della sua vita utile, separatamente dai rifiuti
urbani.
Per maggiori dettagli sulle modalità di smaltimento, contattare il
Fornitore dal quale è stata acquistata l’apparecchiatura o consultare
la sezione dedicata sul sito http://www.datalogic.com.
Information aux utilisateurs
Au terme de sa vie utile, le produit qui porte le symbole d'un caisson à
ordures barré ne doit pas être éliminé avec les déchets urbains.
Pour obtenir des informations complémentaires concernant
l'élimination, veuillez contacter le fournisseur auprès duquel vous
avez acheté le produit ou consulter la section consacrée au site Web
http://www.datalogic.com.
174
Memor™ 10
Safety and Regulatory Information
Información para el usuario
Al final de su vida útil, el producto marcado con un simbolo de
contenedor de bassura móvil tachado no debe eliminarse junto a los
desechos urbanos.
Para obtener una información más detallada sobre la eliminación,
por favor, póngase en contacto con el proveedor donde lo compró o
consultar
la
sección
dedicada
en
el
Web
site
http://www.datalogic.com.
Benutzerinformation bezüglich
Am Ende des Gerätelebenszyklus darf das Produkt nicht über den
städtischen Hausmüll entsorgt werden. Eine entsprechende
Mülltrennung ist erforderlich.
Weitere Informationen zu dieser Richtlinie erhalten sie von ihrem
Lieferanten über den sie das Produkt erworben haben, oder
besuchen sie unsere Hompage unter http://www.datalogic.com.
User’s Manual
175
Safety and Regulatory Information
NOTES
176
Memor™ 10
Support Through the Website
Datalogic provides several services as well as technical support
through its website.
Log on to www.datalogic.com and click on the SUPPORT link which
gives you access to:
Downloads by selecting your product model from the dropdown list
in the Search by Product field for specific Data Sheets, Manuals,
Software & Utilities, and Drawings;
Repair Program for On-Line Return Material Authorizations (RMAs)
plus Repair Center contact information;
Customer Service containing details about Maintenance
Agreements;
Technical Support through email or phone.
Reference Documentation
For further information regarding Memor 10 refer to the SDK Help
on-line.
Warranty Terms and Conditions
The warranty period is 1 year for the device and 90 days for
consumables (e.g. battery, power supply, cable etc.) from date of
purchase at our company.
User’s Manual
177
Support Through the Website
NOTES
178
Memor™ 10
Glossary
Access Point
A device that provides transparent access between Ethernet wired
networks and IEEE 802.11 interoperable radio-equipped mobile
units. Hand-held mobile computers, PDAs or other devices equipped
with radio cards, communicate with wired networks using Access
Points (AP). The mobile unit (mobile computer) may roam among the
APs in the same subnet while maintaining a continuous, seamless
connection to the wired network.
ASCII
American Standard Code for Information Interchange. A 7
bit-plus-parity code representing 128 letters, numerals, punctuation
marks and control characters. It is a standard data transmission
code in the U.S.
Barcode
A pattern of variable-width bars and spaces which represents
numeric or alphanumeric data in binary form. The general format of
a barcode symbol consists of a leading margin, start character, data
or message character, check character (if any), stop character, and
trailing margin. Within this framework, each recognizable
symbology uses its own unique format.
User’s Manual
179
Glossary
Bit
Binary digit. One bit is the basic unit of binary information. Generally,
eight consecutive bits compose one byte of data. The pattern of 0
and 1 values within the byte determines its meaning.
Bluetooth@
A standard radio technology using a proprietary protocol. The
onboard Bluetooth@ module in the device is compatible with the 2.1
protocol with Enhanced Data Rate (EDR).
Boot
The process a computer goes through when it starts. During boot, the
computer can run self-diagnostic tests and configure hardware and
software.
Byte
On an addressable boundary, eight adjacent binary digits (0 and 1)
combined in a pattern to represent a specific character or numeric
value. Bits are numbered from the right, 0 through 7, with bit 0 the
low-order bit. One byte in memory can be used to store one ASCII
character.
CDRH
Center for Devices and Radiological Health. A federal agency
responsible for regulating laser product safety. This agency specifies
various laser operation classes based on power output during
operation.
Character
A pattern of bars and spaces which either directly represents data or
indicates a control function, such as a number, letter, punctuation
mark, or communications control contained in a message.
180
Memor™ 10
Glossary
Decode
To recognize a barcode symbology (e.g., Codabar, Code 128, Code 3 of
9, UPC/EAN, etc.) and convert the content of the barcode scanned
from a visual pattern into electronic data.
Density (Barcode Density)
The number of characters represented per unit of measurement
(e.g., characters per inch).
Depth of Field (DOF)
The portion of a scene that appears acceptably sharp in the image.
Although a lens can precisely focus at only one distance, the
decrease in sharpness is gradual on each side of the focused
distance, so that within the DOF, the unsharpness is imperceptible
under normal viewing conditions.
Dock
A dock is used for charging the terminal battery and for
communicating with a host computer, and provides a storage place
for the terminal when not in use.
ESD
Electro-Static Discharge
Ethernet
The standard local area network (LAN) access method. A reference
to "LAN", "LAN connection" or "network card" automatically implies
Ethernet. Defined by the IEEE as the 802.3 standard, Ethernet is
used to connect computers in a company or home network as well
as to connect a single computer to a cable modem or DSL modem
for Internet access.
User’s Manual
181
Glossary
Firmware
A software program or set of instructions programmed on a
hardware device. It provides the necessary instructions for how the
device communicates with the other computer hardware. Firmware
is typically stored in the flash ROM of a hardware device. While ROM
is "read-only memory," flash ROM can be erased and rewritten
because it is actually a type of flash memory.
Flash Memory
Non-volatile memory for storing application and configuration files.
GSM
Global System for Mobile communication. It is a standard for digital
cellular communications, currently used around the world on as
many as seven bands.
Host
A computer that serves other mobile computers in a network,
providing services such as network control, database access, special
programs, supervisory programs, or programming languages.
IEC
International Electrotechnical Commission. This international agency
regulates laser safety by specifying various laser operation classes
based on power output during operation.
IEEE 802.11
A set of standards carrying out wireless local area network (WLAN)
computer communication in the 2.4, 3.6 and 5 GHz frequency bands.
They are created and maintained by the IEEE LAN/MAN Standards
Committee.
182
Memor™ 10
Glossary
IP
Internet Protocol. The IP part of the TCP/IP communications
protocol. IP implements the network layer (layer 3) of the protocol,
which contains a network address and is used to route a message
to a different network or subnetwork. IP accepts "packets" from the
layer 4 transport protocol (TCP or UDP), adds its own header to it and
delivers a "datagram" to the layer 2 data link protocol. It may also
break the packet into fragments to support the maximum
transmission unit (MTU) of the network.
IP Address
(Internet Protocol address) The address of a computer attached to
an IP network. Every client and server station must have a unique IP
address. A 32-bit address used by a computer on a IP network.
Client workstations have either a permanent address or one that is
dynamically assigned to them each session. IP addresses are
written as four sets of numbers separated by periods; for example,
204.171.64.2.
LAN
Local area network. A radio network that supports data
communication within a local area, such as within a warehouse of
building.
Laser
Light Amplification by Stimulated Emission of Radiation.The laser is
an intense light source. Light from a laser is all the same frequency,
unlike the output of an incandescent bulb. Laser light is typically
coherent and has a high energy density.
User’s Manual
183
Glossary
Laser Diode
A gallium-arsenide semiconductor type of laser connected to a
power source to generate a laser beam. This laser type is a compact
source of coherent light.
Light Emitting Diode (LED)
A low power electronic light source commonly used as an indicator
light. It uses less power than an incandescent light bulb but more
than a Liquid Crystal Display (LCD).
Liquid Crystal Display (LCD)
A display that uses liquid crystal sealed between two glass plates.
The crystals are excited by precise electrical charges, causing them to
reflect light outside according to their bias. They use little electricity
and react relatively quickly. They require external light to reflect their
information to the user.
MIL
1 mil = 1 thousandth of an inch.
Pairing
A Bluetooth@ pairing occurs when two Bluetooth@ devices agree to
communicate with each other and establish a connection.
Parameter
A variable that can have different values assigned to it.
RAM
Random Access memory. Data in RAM can be accessed in random
order, and quickly written and read.
184
Memor™ 10
Glossary
Resolution
The narrowest element dimension which is distinguished by a
particular reading device or printed with a particular device or
method.
RF
Radio Frequency.
ROM
Read-Only Memory. Data stored in ROM cannot be changed or
removed.
Scanner
An electronic device used to scan bar code symbols and produce a
digitized pattern that corresponds to the bars and spaces of the
symbol. Its three main components are:
•
Light source (laser or photoelectric cell) - illuminates a bar
code.
•
Photodetector - registers the difference in reflected light
(more light reflected from spaces).
•
Signal conditioning circuit - transforms optical detector
output into a digitized bar pattern.
SDK
Software Development Kit.
Subnet
A subset of nodes on a network that are serviced by the
same router.
User’s Manual
185
Glossary
Symbol
A scannable unit that encodes data within the conventions of a
certain symbology, usually including start/stop characters, quiet
zones, data characters and check characters.
Symbology
The structural rules and conventions for representing data within a
particular bar code type (e.g. UPC/EAN, Code 39, PDF417, etc.).
USB
Universal Serial Bus. Type of serial bus that allows peripheral devices
(disks, modems, printers, digitizers, data gloves, etc.) to be easily
connected to a computer. A "plug-and-play" interface, it allows a
device to be added without an adapter card and without rebooting
the computer (the latter is known as hot-plugging). The USB
standard, developed by several major computer and
telecommunications companies, supports data-transfer speeds up
to 12 megabits per second, multiple data streams, and up to 127
peripherals.
Visible Laser Diode (VLD)
A solid state device which produces visible laser light.
WLAN
A Wireless Local Area Network links devices via a wireless
distribution method (typically spread-spectrum or OFDM radio), and
usually provides a connection through an access point to the wider
internet. This gives users the mobility to move around within a local
coverage area and still be connected to the network.
WPAN
A Wireless Personal Area Network is a personal area network - a
network for interconnecting devices centered around an individual
186
Memor™ 10
Glossary
person's workspace - in which the connections are wireless.
Typically, a wireless personal area network uses some technology
that permits communication within about 10 meters - in other
words, a very short range.
WWAN
Stands for "Wide Area Network." It is similar to a Local Area Network
(LAN), but it is not limited to a single location and it uses Mobile
telecommunication cellular network technologies such as UMTS,
GPRS, CDMA2000, GSM, CDPD, Mobitex, HSDPA or 3G to transfer
data. WWAN connectivity allows a user with a laptop and a WWAN
card to surf the web, check email, or connect to a Virtual Private
Network (VPN) from anywhere within the regional boundaries of
cellular service.
User’s Manual
187
www.datalogic.com
©2019-2020 Datalogic S.p.A. and/or its affiliates. All rights
reserved. Datalogic and the Datalogic logo are registered
trademarks of Datalogic S.p.A. in many countries, including
the U.S.A. and the E.U.
Datalogic S.r.l.
Via S. Vitalino, 13 | Lippo di Calderara di Reno
BO 40012| Italy
Telephone: (+39) 051-3147011| Fax: (+39) 051-3147205
822003192
(Rev C)
June 2020
">