Datalogic S.r.l.
Via San Vitalino 13
40012 Calderara di Reno (BO)
Italy
Tel. +39 051 3147011
Fax +39 051 3147205
©2018-2020 Datalogic S.p.A. and/or its affiliates w All rights reserved. w Without limiting the rights under copyright, no part of this documentation may be reproduced, stored in or introduced into a retrieval system, or transmitted in any form or by any means, or for any purpose, without the express written permission of Datalogic S.p.A. and/or its affiliates. Owners of
Datalogic products are hereby granted a non-exclusive, revocable license to reproduce and transmit this documentation for the purchaser’s own internal business purposes. Purchaser shall not remove or alter any proprietary notices, including copyright notices, contained in this documentation and shall ensure that all notices appear on any reproductions of the documentation. Should future revisions of this manual be published, you can acquire printed versions by contacting your Datalogic representative. Electronic versions may either be downloadable from the Datalogic website ( www.datalogic.com
) or provided on appropriate media. If you visit our website and would like to make comments or suggestions about this or other Datalogic publications, please let us know via the “Contact Datalogic” page.
Disclaimer
Datalogic has taken reasonable measures to provide information in this manual that is complete and accurate, however, Datalogic reserves the right to change any specification at any time without prior notice. Datalogic and the Datalogic logo are registered trademarks of Datalogic S.p.A. in many countries, including the U.S.A. and the E.U.
Memor is a trademark of Datalogic S.p.A. and/or its affiliates. All other brand and product names may be trademarks of their respective owners. Google, Google Play and other marks are trademarks of Google
LLC.
Patents
See www.patents.datalogic.com
for patent list.
Memor™ 10 Healthcare
Rugged Mobile Computer with 1D/2D Imager
Quick Start Guide
Out of the Box
The Memor 10 package contains: y Memor 10 PDA y Rechargeable battery pack y USB Type-C cable y Handstrap y Quick Start Guide y Safety & Regulatory Addendum y End User License Agreement (EULA) Sheet
Remove all the components from their packaging; check their integrity and compare them with all the packing documents.
CAUTION
Keep the original packaging for use when sending products to the technical assistance center. Damage caused by improper packaging is not covered under the warranty.
General View
Charging LED
Front View
Good Read
Indicator
Power Button
Right Trigger
USB Type-C Port
Top View
Data Capture
Window
Side View
Volume Control
Buttons
Left Trigger
822002761 (Rev. B) April 2020
Reference Documentation
For further information regarding Memor 10 refer to the SDK Help on-line and to the Memor 10 User’s
Manual, downloadable from our website www.datalogic.com
.
Support Through the Website
Datalogic provides several services as well as technical support through its website.
Log on to www.datalogic.com
and click on the SUPPORT link which gives you access to:
Downloads by selecting your product model from the dropdown list in the Search by Product field for specific Data Sheets, Manuals, Software & Utilities, and Drawings;
Repair Program for On-Line Return Material Authorizations (RMAs) plus Repair Center contact information;
Customer Service containing details about Maintenance Agreements;
Technical Support through email or phone.
Warranty Terms and Conditions
The warranty period is 1 year for the device and 90 days for consumables (e.g. battery, power supply, cable etc.) from date of purchase at our company.
See the Safety & Regulatory Addendum
See the Safety & Regulatory Addendum included with your product for additional regulatory, safety and legal information.
中文版快速使用指南及法律折页，请见
Datalogic
官网
: www.datalogic.com
The chinese version of the Quick Start
Guide and the Safety & Regulatory addendum is downloadable from the
Datalogic website: www. datalogic.com
(see Support Through the Website) .
©2018-2020 Datalogic S.p.A. and/or its affiliates. All rights reserved. Datalogic and the Datalogic logo are registered trademarks of Datalogic S.p.A. in many countries, including the U.S. and the E.U.
Touch Panel
Display
LED Flash
Battery
Swap LED
Back
Home
Back View
TOF Sensor Speaker
Recent
SIM Card
Socket
MicroSD Card
Socket
Battery Installation
1. Rotate the latches to the open position:
2. Insert the battery pack into the slot, bottom first, and press it into place:
3. Rotate the latches to the lock position to lock the cover: www.datalogic.com
Charging Instructions
The battery pack is not initially fully charged. After installing the battery, charge it with the USB Type-C or with a dock (single slot dock, 3-slot dock, vehicle dock, 4-slot battery charger).
During the charging process the charging LED positioned at the top left side of the display glows red constantly. Once the charging process has been completed, the charging LED glows green constantly.
Charge with USB
Use the provided USB Type-C cable in conjunction with the power supply adapter (p/n 94ACC0196) to charge the device from a power outlet.
The charger is modular, with one adapter and five switchover plugs.
NOTE
For information on the single slot dock/ 3-slot dock/ vehicle dock/ 4-slot battery charger refer to the Quick Start Guide included in the dock's box.
NOTE
The Memor 10 may get warm during charging. This is normal and does not mean a malfunction.
Scanning and Imaging
2D Imager Data Capture
To scan a bar code symbol:
1. Point the scan window at the bar code.
2. Press the scan key. A blue-violet spot illuminates the symbol, which is captured and decoded.
If the scan has been successful: y If enabled, the good read beep plays.
y If enabled, the GreenSpot projects a green spot onto the bar code image.
y The good read indicator positioned at the top left side of the display glows green constantly.
SIM Card Installation
1. Turn off the Memor 10 or put it in swap battery mode (refer to the User’s Manual for more details).
2. Remove the battery pack (see Battery Installation ):
3. Insert the SIM card with the written part upward.
You can also use the USB cable to charge the Memor 10 from any self-powered USB hub or USB port on a computer.
CAUTION
Use only the Datalogic power supply 94ACC0196 to power the Memor 10.
Charge with the Dock
Insert the device into the dock with the screen facing front and the head facing up.
4. Replace the battery (see Battery Installation ).
MicroSD Card Installation
1. Turn off the Memor 10 or put it in swap battery mode (refer to the User’s Manual for more details).
2. Remove the battery pack (see Battery Installation ):
3. Insert the microSD card with the written part upward.
Linear Bar Code 2D Matrix Symbol
Relative Size and Location of Aiming System Pattern
Use only the Datalogic power supply 94ACC0197 to power any of the docks.
CAUTION
CAUTION
Do not put any foreign object such as, but not limited to, coins, paper clips, stickers inside the slot of any of the docks.
Do not apply any sticker to the Memor 10 (see the examples below).
4. Replace the battery (see Battery Installation ).
Cleaning Instructions
Periodically clean the Memor 10 Healthcare device and the dock using a soft cloth slightly dampened with only water, or or one of the following allowed cleaning agents: y Sani-Cloth® HB, Sani-Cloth® Plus, y Super Sani-Cloth® y Hepacide Quat II y Alcohol Wipes 70% y CaviWipesTM y Virex® 256 y 409® Glass and Surface Cleaner y Windex® y Clorox® Bleach y 100% Gentle dish soap and water.
Do not use any other cleaning agents (e.g. different alcohol, abrasive or corrosive products, solvents) or abrasive pads to clean the device.
Do not spray or pour liquids directly onto the device.
