Datalogic Magellan 2300HS Single Plane Scanner Quick Reference Guide
Reklama
Reklama
Magellan
TM
2300HS
Quick Reference Guide
Datalogic USA, Inc.
959 Terry Street
Eugene, OR 97402
USA
Telephone: (541) 683-5700
Fax: (541) 345-7140
©2002-2017 Datalogic S.p.A. and its Group companies
An Unpublished Work - All rights reserved. No part of the contents of this documentation or the procedures described therein may be reproduced or transmitted in any form or by any means without prior written permission of Datalogic S.p.A. or its subsidiaries or affiliates ("Datalogic" or "Datalogic USA, Inc.”). Owners of
Datalogic products are hereby granted a non-exclusive, revocable license to reproduce and transmit this documentation for the purchaser's own internal business purposes. Purchaser shall not remove or alter any proprietary notices, including copyright notices, contained in this documentation and shall ensure that all notices appear on any reproductions of the documentation.
Should future revisions of this manual be published, you can acquire printed versions by contacting your
Datalogic representative. Electronic versions may either be downloadable from the Datalogic website
(www.datalogic.com) or provided on appropriate media. If you visit our website and would like to make comments or suggestions about this or other Datalogic publications, please let us know via the "Contact
Datalogic" page.
Disclaimer
Datalogic has taken reasonable measures to provide information in this manual that is complete and accurate, however, Datalogic reserves the right to change any specification at any time without prior notice.
Datalogic and the Datalogic logo are registered trademarks of Datalogic S.p.A. in many countries, including the U.S.A. and the E.U. All other brand and product names may be trademarks of Datalogic S.p.A. or of Datalogic Group companies, registered in many countries, including the U.S. and the E.U.
All other brand and product names may be trademarks of their respective owners.
Magellan is a trademark of Datalogic S.p.A. or of Datalogic Group companies, registered in many countries, including the U.S. and the E.U. All-Weighs, FirstStrike, SmartSentry, SurroundScan, and ScaleSentry are trademarks of Datalogic S.p.A. or of Datalogic Group companies, registered in the U.S.
Patents
See www.patents.datalogic.com
for patent list.
See the Regulatory Addendum included with your product for additional regulatory, safety and legal information.
Table of Contents
Appendix A — Productivity Index Reporting Option ..............................................29
NOTES
Quick Reference Guide
Introduction
This guide offers a summary of basic scanner operation for first time users. Installers, system managers and other technical personnel can find installation, programming and further advanced information in the Product Reference Guide. Up-to-date revisions of publications can be viewed, printed and downloaded from the website listed on the back
Connection
cover of this manual. Printed manuals can also be ordered from your dealer/distributor.
For your convenience, Figure 1 shows scanner connections and their functions.
Figure 1. Connections
EAS Opening
Scanner Host Aux. Port Power
EAS Connection
· Electronic Article Surveillance
Connection
Connection to this port is Optional
POS TERMINAL
· Label Data
· Application Download
(where appropriate)
AUXILIARY PORT
· Test Port
· On Screen
Programming (OSP)
· Application Download
· RS-232 Handheld Scanner Input
· Auxiliary RS-232 Label Data Output
POWER
· DC Brick Input
Connection to this port is Optional
Quick Reference Guide 1
2
Operation
Scanning Items
The scanner is mounted so its scan window is flush with the countertop. This allows for maximum working space, and also permits the user to slide items over its surface without having to grasp or pick them up. Bar codes are effortlessly scanned when swept through the zone projected from the substantial scan window as shown in
Facing bar code labels in the direction of scanning, or toward the scan window will optimize the scan rate. The arrow on the scanner’s top cover indicates the direction scanned items should be moved (see
NOTE
With FirstStrike
TM
decoding software, the scanner can read most hard-to-read codes quickly and without excess orientation.
Figure 2. Operating the Scanner a
Item
Bar
Code
Items are pushed or slid past scanner b
Scan Volume
Scanner d
Product
Flow
Volume/Tone Push Button
Green LED c
Magellan™ 2300HS
Volume/Tone Push Button
The Volume/Tone Push Button (
Figure 2 d — accessed by removing the Top Cover
c) also performs multiple functions depending upon the duration of time it is pressed:
NOTE
Volume changes made using the Volume/Tone Push Button are lost when the scanner is powered-down and are reset to the configured setting. If you wish to permanently change the volume, use the special programming labels in the Product Reference Guide.
Table 1. Volume/Tone Push Button Functions
PRESS
DURATION
FUNCTION COMMENT
Momentary (when scanner is asleep)
Momentary (when scanner is awake)
Hold, then release when the beeper sounds
Wakes scanner from Sleep Mode
Increments volume
Increments tone
Alternatively, the scanner can be awakened by:
- Moving an object through the scan zone.
- Scanning with an attached auxiliary scanner.
Press the push button momentarily to increase speaker volume.
When the loudest volume is reached, a repeated press of the push button cycles volume back to the lowest setting, then volume increases on subsequent press(es). Four volume levels are available.
Press the push button for approximately 2 seconds, then release. Each time this is done, the beeper will sound at one of three tones. Stop when the desired tone (high, medium or low) is sounded.
4 Seconds Scanner Diagnostics Mode a
This mode allows system support personnel to troubleshoot problems with the scanner and is used to determine if it can read bar codes. Press the button for eight seconds or cycle power to exit Scanner Diagnostics Mode and reset the scanner.
8 Seconds Resets Scanner b
Only system support personnel should perform a reset.
a.
By standard default, this function is normally disabled to prevent accidental activation by users.
b. Users should not perform scanner resets except under the direction of trained systems support personnel.
Quick Reference Guide 3
4
Green LED Indicator
The green LED (
Figure 2 d) indicates scanner status as shown in the table below.
Table 2. Green LED Indications
LED INDICATION
Scanner Active a
(Normal Mode)
DURATION
Scanner (Green) LED on steady and dim
Scanner (Green) LED - bright flash Good Read Indica-
Program Mode
Indication
Scanner (Green) LED - Continuous flashing
Sleep Mode Indication
Scanner (Green) LED flashes slowly
COMMENT
The scanner is ready for operation. Scanning is immediately available.
Indicates a bar code has been read and decoded.
Indicates the scanner is in Label Programming Mode. Cycle power to exit Programming Mode.
The scanner motor and/or laser have automatically switched off and the unit has entered Sleep Mode due to extended inactivity.
Host Disabled
Scanner (Green) LED 1-second off, 1/10second on Host has disabled scanning.
Field Replaceable
Unit (FRU) Warning (Error Mode)
Audible low tone 1 second. LED flashes continuously.
Serves notice that a fatal FRU failure has been detected.
Call systems support for service.
Scanner (Green) LED flashes a coded sequence in concert with the speaker.
FRU Indication
Occurs ONLY upon Volume/Tone button push following a
FRU warning. Enables service technicians to identify FRU failures.
a. Certain functions of the LED are selectable to be enabled or disabled. Your scanner may not be programmed to display all indications.
Magellan™ 2300HS
Introduction
Ce guide présente une synthèse du fonctionnement de base du scanner à l'attention des utilisateurs novices. Les installateurs, les administrateurs de système et autres personnels techniques pourront obtenir des informations sur l'installation, la programmation ainsi que d'autres indications plus avancées dans le Guide de référence du produit. Il est possible de consulter, d'imprimer et télécharger des mises à jour des publications à partir du site de Datalogic à l'adresse reportée sur la couverture postérieure de ce manuel. Il est
également possible de commander des manuels imprimés auprès de votre vendeur/distributeur.
Raccordement
Pour vous aider, consulter la
Figure 1 qui illustre les raccordements et les fonctions du
scanner
Figure 1. Raccordement
EAS Opening
Raccordement EAS
· Système de surveillance
électronique d'articles (EAS)
Raccordement
Le raccordement à ce port est facultatif
Scanner Host Aux. Port Power
Terminal d'encaissement (POS)
· Données étiquette
· Téléchargement de
l'application (le cas
échéant)
Port auxiliaire Alimentation
· Port d'essai
· Affichage de la programmation (OSP)
· Entrée Brick CC
· Téléchargement de l'application
· Entrée scanner à main RS-232
· Sortie auxiliaire RS-232 données
étiquette
Le raccordement à ce port est facultatif
Quick Reference Guide 5
6
Fonctionnement
Lecture d’articles
Le scanner est installé de manière à positionner sa fenêtre de lecture au même niveau que le comptoir. Cette procédure permet d'obtenir un espace de travail maximum et permet à l'utilisateur de faire glisser les articles sur la surface sans devoir les saisir ou les soulever.
Les codes à barres sont numérisés sans aucun effort lorsqu'ils sont passés à travers la zone projetée à partir de la grande fenêtre de lecture illustrée à la
NOTA
La position en face des étiquettes des codes à barres dans la direction de lecture ou face à la fenêtre de lecture optimisera le taux de lectures réussies. La flèche présente sur le couvercle supérieur du scanner indique la direction de déplacement à
suivre pour numériser les articles (voir Figure 2
b).
Grâce au logiciel de décodage FirstStrike™, le scanner peut capturer rapidement et avec une orientation minime la plupart des codes de lecture difficile.
Figure 2. Mode de lecture " Transfert " et " Présentation " a
Code
à barres de l'article
Les articles sont poussés ou glissés devant le scanner b
Scanner
Circulation des produits d
Bouton-poussoir volume/tonalité voyant DEL vert c
Magellan™ 2300HS
Bouton-poussoir volume/tonalité
Le bouton-poussoir volume/tonalité exécute également des fonctions multiples selon la durée de son activation
:
NOTA
Les changements de volume rendent l'utilisation du Bouton de réglage du Volume/Tonalité difficile lorsque le scanner est hors tension et est réinitiliasé au paramètre configuré. Si vous désirez changer définitivement le volume, utilisez les étiquettes spéciales de programmation dans le Guide de référence du produit.
Table 1. Fonctions du bouton-poussoir Volume/tonalité
DURÉE
D'ACTIVATION
FONCTION COMMENTAIRE
Momentané (lorsque le scanner est en mode de veille)
Momentané (lorsque le scanner est en mode d'éveil)
Réveille le scanner du mode de veille
Augmente le volume
En alternative, le scanner peut être réveillé par :
- déplacement d'un objet à travers la zone de balayage.
- un changement de poids sur la balance.
- Lecture avec un scanner auxiliaire attaché
Pressez le bouton-poussoir momentanément pour augmenter le volume du haut-parleur. Après avoir atteint le volume le plus
élevé, une pression répétée du bouton-poussoir reporte progressivement le volume au niveau le plus bas, le volume augmente ensuite en fonction des pressions successives. Cinq niveaux de volume sont disponibles.
Maintenez la touche enfoncée et relâchez-la lorsque l'avertisseur sonore retentit
4 secondes
8 secondes
Augmente la tonalité
Mode de diagnostic du scanner
Remet le scanner à l'état initia b a
Pressez le bouton-poussoir pendant approximativement 2 secondes, puis relâchez. A chaque pression, l'avertisseur retentira selon une des trois tonalités. Arrêtez lorsque la tonalité désirée
(élevée, moyenne ou faible) est obtenue.
Ce mode permet au personnel chargé de l'assistance du système de remédier aux problèmes du scanner. Les diagnostics sont généralement lancés après la notification d'une alarme du module interchangeable (voir Tableau 1). Débranchez et rebranchez l'alimentation pour sortir du mode diagnostic.
Seul le personnel chargé de l'assistance du système est autorisé
à exécuter la remise à l'état initial.
a. Par défaut, cette fonction est neutralisée pour empêcher l'activation accidentelle par des utilisateurs.
b. Les utilisateurs ne devraient pas procéder à la remise à l'état initial du scanner sauf sous la direction de personnel agréé chargé de l'assistance des systèmes.
Quick Reference Guide 7
8
Fonctions des voyant DEL Vert
d) indique l'état du scanner au Table 2
ci-dessous.
Table 2. Green LED Indications
LED INDICATION
Scanner Actif a
(Mode normal)
Lecture correcte
DURATION
Voyant DEL vert en mode veille fixe
Voyant DEL vert - clignotement lumineux
COMMENT
Le scanner est prêt à fonctionner. Le balayage est immédiatement disponible.
Indique la lecture et le décodage du code à barres.
Indication du mode programme
Indication du mode de veille
Voyant DEL vert - Clignotement continu
Le voyant DEL vert clignote lentement
Indique que le scanner est en mode de programmation Étiquette. Débranchez et rebranchez l'alimentation pour sortir du mode de programmation.
Le moteur du scanner et/ou le laser sont mis automatiquement hors tension et l'unité passe en mode de veille à cause de l'inactivité prolongée.
1 seconde éteint, 1/10è de seconde allumé
Système invalide Système invalide scanner.
Alarme de module interchangeable(Mode d'erreur)
Signal sonore bas 1 seconde. Voyant DEL vert/jaune alternatif clignote de manière continue.
Indique qu'une erreur fatale du module interchangeable a
été détectée.
Indication de module interchangeable
Le voyant DEL vert clignote selon une séquence codée en combinaison avec le haut-parleur.
UNIQUEMENT au cas où le bouton Volume/tonalité serait activé suite à une alarme d’un module interchangeable.
Ceci permet aux techniciens d'identifier les défaillances du module interchangeable.
a. Il est possible de sélectionner certaines fonctions des voyants DEL vert et jaune afin de les activer ou désactiver. Il n'est pas possible de programmer votre scanner pour afficher toutes les indications.
Magellan™ 2300HS
Einleitung
Diese Anleitung bietet eine Zusammenfassung der grundlegenden Scanner-Bedienung für neue Benutzer. Systemmanager, Installations- und anderes technisches Personal finden
Informationen zu Installation, Programmierung und weitere Angaben im Produktreferenzhandbuch. Aktuelle Änderungen der Publikationen finden Sie auf der Datalogic-Homepage; diese können Sie drucken und herunterladen. Die Internet-Adresse finden Sie auf der
Rückseite dieses Handbuchs. Gedruckte Handbücher können Sie auch bei Ihrem Händler/
Vertreter bestellen.
Anschliessen
Zahl 1. Anschlüsse
zeigt die Scanner-Anschlüsse und ihre Funktionen.
EAS Opening
Scanner Host Aux. Port Power
EAS-Anschluß
· Elektronische Artikelüberwachung
(EAS) Anschluß
POS-Terminal Zusätzlicher Port Stromversorgung
· Kennsatzdaten
· Applikations-Download
(falls zutreffend)
· Test-Port
· On Screen Programming (OSP)
· Applikations-Download
· Eingang für RS-232 Handheld Scanner
· Zusätzlicher RS-232 Kennsatz-
Datenausgang
· Gleichstrom-
Brickeingang
Anschluß an diesen Port ist optional Anschluß an diesen Port ist optional
Quick Reference Guide 9
Bedienung
Scannen von Produkten
Der Scanner wird so installiert, dass das Scanfenster mit der Ladentheke bündig ist. So erhält man eine maximale Arbeitsfläche, und der Benutzer kann die Artikel über diese
Oberfläche schieben, ohne sie greifen oder aufheben zu müssen. Barcodes werden leicht gescannt, wenn sie durch die von dem großen Scanfenster projizierte Zone bewegt werden
(siehe
Ausrichten der Barcode-Aufkleber in Scanrichtung oder zum
Scanfenster erhöht die Scanrate. Der Pfeil auf der oberen
Abdeckung des Scanners zeigt die Richtung an, in der die Artikel
bewegt werden sollten (siehe Zahl 2
b).
BEACHTEN SIE
Mit Hilfe der FirstStrikeTM Decodierungssoftware kann der Scanner die meisten schwer lesbaren Codes schnell und ohne übermäßige Ausrichtung lesen.
Zahl 2. Bedienung des Scanner a
Artikel-
Barcode
Artikel werden an dem Scanner vorbeigeschoben b
Scanner d
Warenfluß
Lautstärke/Tonschalter
Grüne LED c
10 Magellan™ 2300HS
Lautstärke/Tonschalter
BEACHTEN SIE
Änderungen der Lautstärke, die über die Drucktaste "Volume/
Tone" erfolgt sind, werden beim Herunterfahren des Scanners gelöscht, und es erfolgt ein Zurücksetzen auf die Werkseinstellungen. Eine dauerhafte Änderung der Lautstärke kann mit
Hilfe der speziellen Programmierkenndaten im Produktreferenzhandbuch vorgenommen werden.
Tabelle 1. Lautstärke/Tonschalter-Funktionen
Betätigungsdauer Funktion Bemerkung kurz (wenn der Scanner im Bereitschaftsmodus ist) kurz (wenn sich der
Scanner im Betriebsmodus befindet) versetzt den Scanner vom
Bereit-schafts- in den Betriebsmodus
Erhöhung der Lautstärke
Der Scanner kann in den Bereitschaftsmodus versetzt werden entweder durch:
- Bewegen eines Objektes durch den Scanbereich
- eine Gewichtsänderung auf der Waage
- Scannen mit einem extern angeschlossenen Handscanner
Durch kurzzeitiges Betätigen des Schalters wird die Lautstärke erhöht. Wenn die höchste Stufe erreicht ist, wird durch erneutes
Betätigen die Lautstärke auf die niedrigste Stufe zurückgesetzt.
Danach steigt die Lautstärke wieder an. Fünf Lautstärken können eingestellt werden.
Halten und beim Hören des Signals
Erhöhung der Tonhöhe
Betätigen Sie den Schalter für ca. 2 Sekunden und lassen Sie ihn dann los. Dadurch können die drei möglichen Tonhöhen (hoch, mittel und tief) eingestellt werden.
4 Sekunden Scannerdiagnosemodus a
Dieser Modus erlaubt dem technischen Personal die Identifikation von Problemen, die beim Scanner aufgetreten sind. Drücken
Sie den Schalter für 8 Sekunden oder schalten Sie zum Verlassen des Scannerdiagnosemodus' den Scanner aus und ein und starten den Scanner neu.
8 Sekunden Scanner-Reset b
Nur das technische Personal sollte einen Reset durchführen.
a. In der Standardeinstellung ist diese Funktion ausgeschaltet, um versehentliche Aktivierung durch den Benutzer vorzubeugen.
b. Anwender sollten keinen Scanner-Reset durchführen außer unter der Anweisung ausgebildeten Servicepersonals.
Quick Reference Guide 11
Grüne LED Funktionen
Tabelle 2. Grüne LED Funktionen
LED Anzeige
Scanner ist aktiv a
(Normalmodus)
Dauer
Die Grüne Anzeige ist dauerhaft an und leuchtet schwach
Optisches Signal, das erfolg-reiches
Scannen anzeigt
Grüne Anzeige - helles Aufblinken
Programmiermodusanzeige
Grüne Anzeige - wiederholtes Blinken
Bereitschaftsmodusanzeige
Die grüne LED-Anzeige blinkt im 2-Sekunden-Takt.
Host außer
Betrieb
1 Sekunde aus, eine zehntel Sekunde an
Hardwarefehlerwarnung (Fehlermodus)
Akustischer tiefer Ton 1 Sekunde und die grüne/gelbe Anzeige blinkt fortwährend
Bemerkung
Der Scanner ist betriebsbereit. Scannen ist sofort möglich.
Zeigt das erfolgreiche Lesen und Decodieren eines Barcodes an.
Zeigt an, daß sich der Scanner im Barcode-Program-miermodus befindet. Zum Verlassen des Programmiermodus schalten Sie aus und ein.
Der Scanner- oder Lasermotor hat sich nach längerer
Nichtbenutzung automatisch abgeschaltet und ist in den
Bereitschaftsmodus übergegangen..
Host ermöglicht kein Scannen.
Zeigt an, daß ein schwerer Hardwarefehler entdeckt wurde.
Hardwarefehler-
Anzeige (Fehler-
Modus)
Grüne Anzeige blinkt in einer kodierten
Sequenz zusammen mit dem Lautsprecher.
Tritt NUR auf, wenn der Lautstärke/Tonknopf betätigt wurde und eine Hardwarefehlerwarnung auftritt. Diese
Anzeige ermöglicht dem Techniker, den Hardwarefehler zu identifizieren..
a. Bestimmte LED-Funktionen können wahlweise aktiviert oder deaktiviert werden.
12 Magellan™ 2300HS
Introduzione
Questa guida offre un sommario delle operazioni principali dello scanner per utenti inesperti. Installatori, amministratori di sistema e altro personale tecnico possono trovare informazioni sull'installazione, programmazione ed altre questioni avanzate nella guida di riferimento del prodotto. Revisioni aggiornate delle pubblicazioni possono essere visualizzate, stampate e scaricate dal sito web Datalogic indicato sulla copertina posteriore di questo manuale. È possibile anche ordinare i manuali su carta dal proprio rivenditore/distributore.
Connessione
Per comodità, la Figura 1 mostra le connessioni dello scanner e le relative funzioni.
Figura 1. Connessioni
EAS Opening
Scanner Host Aux. Port Power
Connessione EAS
· Sistemi per la sorveglianza
elettronica antitaccheggio
Connessione
La connessione su questa porta è opzionale
Terminale POS
· Dati etichetta
· Download
dell'applicazione
(dove appropriato)
Porta ausiliaria Accensione
· Porta di controllo
· Programmazione su schermo (OSP)
· Download applicazione
· Ingresso RS-232 per il lettore palmare
· Uscita ausiliaria RS-232 dati etichetta
· Ingresso Brick CC
La connessione su questa porta è opzionale
Quick Reference Guide 13
Funzionamento
Utilizzo dello scanner
Lo scanner è montato in modo che la sua finestra di scansione si trovi sullo stesso livello del piano di lavoro. Ciò mantiene libero il più possibile il piano di lavoro e consente anche all'utente di spingere gli articoli sulla sua superficie senza doverli afferrare o raccogliere. I codici a barre sono scansiti facilmente facendoli passare nella zona di proiezione della finestra di scansione reale come mostrato in
a.
NOTA
Affacciando le etichette con il codice a barre nella direzione della scansione, o verso la finestra di scansione, si ottimizzerà la velocità di lettura. La freccia posta sullo schermo superiore dello scanner indica la direzione in cui far muovere gli articoli da scansire (vedere
Con il software di decodifica FirstStrike
TM
, lo scanner può leggere anche i codici più difficili da interpretare in modo rapido e senza bisogno di orientare eccessivamente l'articolo.
Figura 2. Funzionamento dello scanner a
Codice a barre dell'articolo
Gli articoli sono spinti o fatti scivolare oltre lo scanner b e
Scanner d
Direzione del prodotto
Tasto tono/volume
LED verde c
14 Magellan™ 2300HS
Tasto tono/volume
Il tasto tono/volume svolge molteplici funzioni in base alla durata della pressione esercitata:
NOTA
Le variazioni di volume effettuate con l'interruttore a pulsante
Volume/Tono sono annullate con lo spegnimento dello scanner e quindi impostate nuovamente nel modo predefinito. Se si vuole modificare permanentemente il volume, utilizzare le speciali etichette di programmazione illustrate nella guida di riferimento del prodotto.
Tavolo 1. Funzioni del Tasto tono/volume
DURATA FUNZIONE NOTA
Momentanea (con scanner in modalità
Sleep)
Momentanea (con scanner operativo)
Risveglia lo scanner dalla modalità
Sleep
Aumenta il volume
In alternativa, lo scanner può essere riattivato:
- Muovendo un oggetto nell'area di scansione.
- Cambiando il peso sulla bilancia.
- Effettuando una scansione con uno scanner ausiliario collegato
Premere brevemente il pulsante per aumentare di un livello il volume dell'altoparlante. Una volta raggiunto il livello massimo, premendo nuovamente il pulsante si torna al livello minimo di volume. Sono disponibili cinque livelli di volume.
Tenere premuto fino all'emissione del segnale acustico
Tenere premuto per 4 secondi
Aumenta il tono
Modalità diagnostica scanner a
Tenere premuto il pulsante per circa 2 secondi, quindi rilasciarlo.
Ogni volta che si effettua questa operazione si cambia il tono con cui viene emesso il segnale acustico. Ripetere l'operazione fino ad impostare il tono desiderato tra quelli disponibili (alto, medio, basso).
Questa modalità consente al personale del servizio di assistenza di identificare le anomalie rilevate sullo scanner. Normalmente, tale modalità viene utilizzata dopo una segnalazione di guasto
FRU (Field Replaceable Unit) (vedi Tabella 1). Premere ripetutamente il tasto power per uscire dalla modalità diagnostica.
La reinizializzazione (reset) dello scanner deve essere effettuata solo dal personale del servizio di assistenza.
Tenere premuto per 8 secondi
Reinizializzazione dello scanner b a. Tramite i parametri standard questa funzione è normalmente disabilitata per prevenire l'attivazione accidentale da parte dell'utilizzatore.
b. L'utente non deve mai effettuare la reinizializzazione dello scanner a meno che non venga esplicitamente richiesto dal personale del servizio di assistenza.
Quick Reference Guide 15
LED Verde
Tavolo 2. Funzioni dei LED verde
SIGNIFICATO
Scanner attivoa a
(Modalità normale)
DURATA
LED verde acceso (intensità media)
LED verde acceso (intensità max) Segnalazione di corretta lettura
Segnalazione modalità programmazione
LED verde - lampeggio continuo
Segnalazione modalità Sleep
LED verde - lampeggio lento
1 secondo spento, 1/10 secondo acceso
Host disabilitata
Anomalia FRU
(Field Replaceable
Unit) (modalità di errore)
Tono basso udibile della durata di 1 secondo. Lampeggio continuo e alternato del
LED verde/giallo.
NOTA
Lo scanner è pronto per l'utilizzo. Funzione di scansione immediatamente disponibile.
Segnala l'avvenuta lettura e decodifica di un codice a barre.
Segnala che lo scanner è in modalità di programmazione.
Premere ripetutamente il tasto power per uscire da tale modalità.
Il motore e/o il laser dello scanner si sono spenti automaticamente e l'unità è passata in modalità Sleep per inattività prolungata.
L'host ha disabilitato la scansione.
Segnala che è stato rilevato un guasto critico FRU.
Indicazione FRU
Il LED verde lampeggia con una sequenza codificata in abbinamento ad un segnale acustic.
Si verifica SOLO quando si preme il tasto tono/volume dopo una segnalazione FRU. Consente al tecnico riparatore di identificare il guasto FRU.
a. È possibile abilitare o disabilitare alcune funzioni del LED.
16 Magellan™ 2300HS
Introducción
Esta guía presenta un resumen de la operación básica del escáner para quienes lo utilizan por primera vez. Los instaladores, administradores de sistema y demás personal técnico pueden consultar la Guía de referencia del producto para obtener detalles de instalación, programación y otra información avanzada. El sitio web de Datalogic, cuya dirección figura en la contratapa de este manual, contiene diferentes publicaciones actualizadas al momento, que se pueden ver, imprimir y descargar. También se le pueden solicitar copias de los manuales impresos en papel a los representantes o distribuidores de Datalogic.
Conexión
Para mayor conveniencia, la
Figura 1 muestra las conexiones del escáner y sus respectivas
funciones.
Figura 1. Conexiones
EAS Opening
Scanner Host Aux. Port Power
Conexión de sistema electrónico para vigilancia de mercancías
· Sistema electrónico para vigilancia
de mercancías Conexión
Terminal de
Punto de venta
· Datos de etiquetas
· Descarga de
aplicaciones (cuando
corresponda)
Puerto auxiliar Alimentación
· Puerto de prueba
· Programación en pantalla (PEP)
· Entrada para
corriente directa
· Descarga de aplicaciones
· Entrada RS-232 para escáner manual
en formato "brick"
· Salida auxiliar RS-232 para datos
de etiquetas
La conexión a este puerto es opcional La conexión a este puerto es opcional
Quick Reference Guide 17
Funcionamiento
Escaneo de objetos
El escáner está colocado de manera tal que la ventana de escaneado quede a nivel del mostrador. Ello hace posible liberar el máximo espacio de trabajo disponible y permite que el usuario deslice los productos sobre la superficie del escáner sin tener que tomarlos ni levantarlos. Los códigos de barra se leen sin esfuerzo cuando se los pasa por la zona que
se proyecta desde la ventana principal de lectura, tal como lo muestra la Figura 2 a.
NOTA
Colocar las etiquetas con el código de barras en la dirección de la lectura, o hacia la ventana de escaneado, optimizará el ritmo del proceso. La flecha que aparece en la tapa superior del escáner indica la dirección en que se deben pasar los productos que se deseen escanear (ver Figura 2b).
Con el software de decodificación FirstStrike TM , el escáner puede leer rápidamente la mayoría de los códigos que son de difícil lectura, sin necesidad de maniobrar demasiado la mercancía.
Figura 2. Operación del escáner a
Código de barra del producto
Se pasan o se deslizan las mercancías frente al escáner b
Campo de lectura
Escáner
Flujo do productos d
Botón pulsador Tono/Volumen
Indicador luminoso verde c
18 Magellan™ 2300HS
Botón pulsador Tono/Volumen
NOTA
Los cambios realizados en el volumen mediante el botón pulsador para Volumen / Tono se pierden cuando se apaga el escáner y, cuando se lo vuelve a encender, se recuperan los valores preestablecidos. Si usted desea modificar el volumen de modo permanente, emplee las etiquetas de programación especial que figuran en la Guía de referencia del producto.
Tabalo 1. Funciones del Botón pulsador Volumen/Tono
PRESIÓN DEL BOTÓN FUNCIÓN COMENTARIO
Momentánea (cuando el escáner está en
Modo de ahorro de energía)
Momentánea (cuando el escáner está activo)
Mantener el botón presionado y luego soltarlo cuando se escucha el tono
4 segundos
Despierta al escáner del Modo de ahorro de energía
Incrementa el volumen
Aumenta el tono
Modo de diagnóstico del escáner a
También se puede despertar el escáner:
-Moviendo un objeto a través de la zona de escaneo.
-Pesando un artículo en la balanza.
-Escaneando con un escáner auxiliar conectado a este escáner
Presione el botón pulsador momentáneamente para aumentar el volumen del parlante. Una vez alcanzado el volumen máximo, volverá a oírse el volumen más bajo cuando se presione el botón otra vez, y luego el volumen irá subiendo con cada pulsación del botón. Hay cinco niveles de volumen.
Presione el botón pulsador durante aproximadamente 2 segundos y luego suéltelo. Cada vez que haga esto, se oirán diferentes tonos (alto, medio o bajo). Deténgase cuando haya oído el tono deseado.
ste modo le permite al personal de mantenimiento del sistema identificar los problemas que pudiese tener el escáner. Por lo general, el diagnóstico se inicia cuando se ha detectado una advertencia FRU (Unidad reemplazable de campo) (vea la Tabla
1). Presione el botón de encendido para salir del Modo de diagnóstico del escáner.
8 segundos Reinicia el escáner b
Esta operación debería ser realizada sólo por personal de mantenimiento del sistema.
a. Por default, esta función es deshabilitada para prevenir activación accidental por el usuario.
b. Los usuarios no deberían reiniciar el escáner a menos que se reciba tal instrucción del personal capacitado en mantenimiento del sistema.
Quick Reference Guide 19
Funciones de el indicador luminoso verde
Tabalo 2. Funciones de el indicador luminoso verde
SIGNIFICADO
DEL INDICADOR
Escáner activo a
(Modo normal)
DURACIÓN COMENTARIO
Indicador luminoso verde constante y tenue El escáner está listo para operar. Se puede escanear inmediatamente.
Indicador luminoso verde con parpadeo brillante Indica que se ha leído y decodificado un código de barras.
Modo de programación
Modo de ahorro de energía
Indicador luminoso verde con parpadeo continuo
Indica que el escáner se encuentra en Modo de programación de etiqueta. Presione el botón de encendido para salir del Modo de programación.
Indicador luminoso verde con parpadeo lento
El motor del escáner y/o el láser se apagaron de manera automática y la unidad ingresó en el Modo de ahorro de energía debido a que ha estado inactiva durante un período extenso.
Terminal incapacitado
1 segundo apagado, 1/10 segundos prendido Terminal tiene lector incapacitador.
Advertencia de
Unidad reemplazable de campo
(FRU, en inglés)
(Modo de error)
Tono audible bajo 1 segundo. Los indicadores luminosos verde y amarillo parpadean continuamente en forma alternada.
Indica que se ha detectado una falla FRU fatal.
Unidad reemplazable de campo,
FRU
El indicador luminoso verde parpadea siguiendo una secuencia codificada en forma conjunta con el parlante.
Ocurre SÓLO si se presiona el botón de Volumen/Tono después de haberse recibido una advertencia de error FRU.
Permite a los técnicos identificar las fallas FRU.
a. Algunas funciones del indicador luminoso son opcionales, por lo que se pueden activar o desactivar.
20 Magellan™ 2300HS
Introdução
Esta guia oferece um sumário de operações básicas do leitor para principiantes.O Instalador, administradores de sistema e outro pessoal técnico podem encontar programação, instalação, e informações avançadas adicionais no Guia de Referência do Produto.
Revisões atualizadas das publicações podem ser visualizadas, impressas e baixadas
(download) do website da Datalogic, que está escrito atrás da capa deste manual. Manuais impressos podem também ser requisitados ao seu revendedor/distribuidor.
Conexão
Figura 1. Conexões
Para a sua comodidade a Figura 1
mostra as conexões do scarnner e as suas funções.
EAS Opening
Scanner Host Aux. Port Power
Conexão EAS
· Conexão para o sistema de
Vigilância Eletrônica de Artigos
Conexão com esta porta é opcional
Terminal POS
· Legenda dos Dados
· Uso do Download
(onde apropriada)
Porta Auxiliar
· Porta de Teste
· Programação (OSP)
· Uso do Download
· Entrada RS-232 para pistolas
· Saída Auxiliar RS-232 Informações
de Leitura
Energia
· Entrada de
Energia C.C.
Conexão com esta porta é opcional
Quick Reference Guide 21
Operação
Para usar seu leitor
O leitor está inserido no balcão, desta forma a sua janela de leitura abrange a área de trabalho. Isto permite um máximo espaço de trabalho, e também permite ao usuário deslizar os artigos, sobre a sua superfície,sem ter que pegá-los ou levantá-los. Os códigos de barras são lidos sem esforço quando passados pela zona projetada na janela de leitura, con-
a.
Colocando as etiquetas com os códigos de barra para cima,na direção do leitor, ou em direção da janela de leitura se otimiza o ritmo de leitura. A flecha localizada na tampa do leitor indica a
direção na qual deve mover os artigos (ver Figura 2 b).
Observação
Com o programa de decodificação FirstStrike
TM
, o leitor pode ler mais rapidamente os códigos difíceis de se ler e sem excessiva orientação
Figura 2. Uso do Leitor a
Código de Barras do Artigo
Os artigos são deslizados ou empurrados perto do scanner b
Volume de Leitura
Leitor d
Fluxo do produto
Botão de Volume/Tonalidade
LED verde c
22 Magellan™ 2300HS
Botão de Volume/Tonalidade
O Botão de Volume/Tonalidade também executa multíplas funções, dependendo da duração que o mesmo foi pressionado:
Observação
As mudanças de intensidade feitas usando o Botão de Volume/
Tonalidade são perdidas quando o leitor é desligado e volta para configuração de instalação. Se você deseja mudar o volume de forma permanente, use as etiquetas de programação da Guia de Referência do Produto.
Tabela 1. Funções do Botão de Volume/Tonalidade
PRESSÃO NO BOTÃO FUNÇÃO OBSERVAÇÃO
Momentária (quando o leitor está em repouso)
Momentária (quando o leitor está ativo)
Aperte, e depois solte quando emitir o sinal sonoro
4 Segundos
8 Segundos
Retira o leitor do Modo de
Repouso
Incrementa o volume
Incrementa o Tom
Modo de Diagnóstico da Leitor
Reinicializa o Leitorr b a
Alternativamente, o leitor pode ser desperto por:
- Passando algum objecto pela zona de leitura.
- Uma troca de peso na balança.
- Fazendo uma leitura com uma pistola auxiliar conectada ao leitor.
Pressione momentáriamente o botão para aumentar o volume do alto-falante. Qunado o volume mais alto for alcançado, pressionando o botão irá retornar o volume para o nível mais baixo, aumentando a cada pressão no botão. Cinco níveis de volume estão disponíveis.
Pressione o botão por aproximadamente 2 segundos e depois solte. Cda vez que isto é efetuado, emitirá um sinal sonoro em um dos três tons. Pare quando tiver o tom desejado (alto, médio, baixo).
Este modo permite que o pessoal da assistência técnica possa detectar problemas com a balança. Pressione o botão por 8 segundos, ou desligue/ligue a energia para sair do Modo de
Diagnóstico do Leitor e reinicializar o leitor.
Sómente pessoal da assistência técnica deve executar a reinicialização.
a. Pelo default de fábrica, esta função está normalmente desabilitada de forma a prevenir uma acidental ativação pelos usuários..
b. Usuários não devem executar a reinicialização do leitor, excepto sob instruções por pessoal treinado da assistência técnica.
Quick Reference Guide 23
Funções do LED Verde
Tabela 2. Funções do LED Verde
INDICAÇÃO
Leitor Ativo a
(Modo Normal)
DURAÇÃO
LED Verde aceso e meio-aceso
OBSERVAÇÃO
O leitor está pronto para ser operado. Leitura está disponível de imediato.
Indicação de Boa
Leitura
LED Verde - piscando forte
Indica a leitura de um código de barras e sua decodificação.
Indicação de Modo de Programação
Indicação de Modo de Repouso
Terminal
Desabilitado
LED Verde - pisca continuamente
LED Verde - pisca lentamente
Indica que o leitor está em Modo de Programação por Etiquetas. Reclica a energia para sair do Modo de Programação.
O motor e/ou laser do leitor se apaga automaticamente e a unidade entra em Modo de Repouso devido a um longo período de inatividade.
1 segundo apagado, 1/10 de segundo aceso
Terminal desabilitou a leitura.
Field Replaceable
Unit (FRU)
Advertência(Modo de Erro)
Tom baixo audível 1 segundo. Pisca de forma continua e alternada os LEDs Verde e
Amarelo
Avisa de uma falha fatal detectada em um FRU.
Indicação de FRU
LED Verde - pisca uma determinada sequencia em conjunto com o alto-falante.
Ocorre SOMENTE pressionando o botão de Volume depois que recebeu uma advertência de FRU. Permite que a assistência técnica possa identificar falha no equipamento.
a. Algumas funções do LED podem ser selecionadas para serem habilitadas ou desabilitadas.
24 Magellan™ 2300HS
简介
该指南向第一次使用扫描器的用户概要介绍扫描器的基本操作。安装人
员、系统管理员和其他技术人员可以在 《产品参考手册》中找到有关安
装、编程和更高级的信息。此手册以及该产品的其他手册在随扫描器所
带的手册 CD 中都有。有关这些出版物的最新修改可以从 Datalogic 网站
上浏览、打印和下载，该网址在本手册的封底上可以找到。您还可以从
经销商 / 分销商那里订购印刷好的手册。
连接
为了方便您了解，
中介绍了扫描器连接及各部分的功能。
图 1. 连接
快速用户指南
25
操作
扫描物品
扫描器是嵌入到工作台面里的且与工作台平齐，这样不仅可以节约工作
空间，用户在使用时也只需将商品在工作台上滑过 , 而不必抓拿商品或
将其拿起来。当将商品从
a 中所示的扫描窗口所投射出的扫描区扫过
的时候，扫描器可以毫不费力地将条码读取。
将条码标签顺着扫描方向或者对着扫描窗口可以达到最佳扫描
速度。扫描器顶盖上的箭头表示扫描商品时应当将商品移动的
方向 ( 见
注意
由于采纳了 FirstStrike
TM
解码软件，扫描器可以快速读取最难读取的
条码，且不需要更多调整物品方位。
图 2. 操作扫描器
26 Magellan™ 2300HS
音量 / 音调按钮
根据按下按钮时间的不同，
音量 / 音调按钮 (
d — 可以通过卸下扫描
器顶盖 [
c] 来操作 )
有多项功能：
当将扫描器关机后，使用音量 / 音调按钮对音量的修改会丢失，
并恢复到原来设定的状态。如果您想永久性地改变音量，请使用
《产品指南》中的特殊编程标签。
注意
表 1. 音量 / 音调按钮的功能
按钮时间
瞬间 ( 当扫描器处于
休眠状态时 )
将扫描器唤醒
瞬间 ( 当扫描器处于
活动状态时 )
提高音量
按下按钮，当听到扬
声器嘟声后释放
提高音调
4 秒
8 秒
功能
扫描器诊断模式 a
重新设置扫描器 b
注解
另外，还可以通过以下方式唤醒扫描器：
- 移动一件物品通过扫描区。
- 用辅助扫描器进行扫描。
瞬间按下按钮可以提高扬声器的音量。当
扬声器到达最大音量时，继续按下按钮会
使音量回到最低，接着再按则会使音量逐
步提高。音量有 4 个等级。
按下按钮大约 2 秒钟，然后释放。每次这
样做，蜂鸣器会以三种声调中的一种发出
声音。当听到想要的声调 （高、中、低）
时停止按按钮。
这种模式下系统支持人员可以对扫描器进
行问题诊断。按下该按钮 8 秒钟或者关机
后重新开机，可以退出扫描器诊断模式和
重新设置扫描器。
只有系统支持人员才能对扫描器进行重新
设置。 a. 牖玷崴叾钐趣啡昧脌观葦? 鞌董€啠曼潭瓈嗭虮惏箖弲天彐偠? 偷€粒 b. 除非有受过训练的系统支持人员的指导，用户不能对扫描器进行重新设置。
快速用户指南
27
绿色指示灯
绿色指示灯 (
d) 所表示的扫描器状态如下表所列：
表 2. 绿色指示灯指示
表示内容
扫描器处于活
动状态 a
( 正常模式 )
持续时间
扫描器绿色指示灯连续发光且
灯光暗淡
注解
扫描器准备就绪，可以随时工作。
扫描器绿色指示灯亮闪一次
表明条码已被读取和解码。
编程模式
休眠模式
主机禁用
扫描器绿色指示灯连续闪烁
绿色指示灯每两秒闪烁一次
表明扫描器处在标签编程模式。关机后
再开机可以退出该模式。
由于长时间闲置，扫描器马达和 / 或激
光器已经自动关闭，系统进入休眠模
式。
扫描器指示灯 1 秒钟关， 1/10
秒亮
主机禁止扫描。
现场可换部件
(FRU) 警告 (
故障模式 )
发出低音调声响 1 秒钟。指示
灯连续闪烁。 表示发现致命的 FRU 故障。请给系统支
持人员打电话寻求帮助。
FRU 指示
扫描器绿色指示灯连续闪烁，
与扬声器的报警声交替回应。 只有当按下音量 / 音调按钮后出现 FRU
警告时才会出现。请维修技术人员查找
FRU 故障。 a. 您可以选择启动或禁用指示灯的某些功能，但扫描器可能不会显示所有的指示。
28 Magellan™ 2300HS
Appendix A — Productivity Index Reporting Option
Productivity Index Reporting
™ ductivity Index Reporting
™
Option — Your scanner may be equipped with the optional Pro-
feature. This feature allows for data collection on the readability index of bar codes scanned by the scanner. This data may be transmitted to the POS Terminal where it may be easily sorted for action by the MIS department to improve bar code quality at the front end.
For additional information on how to enable Productivity Index Reporting in your scanner, please refer to the Product Reference Guide (PRG)
Option "Productivity Index Reporting
™
" — Votre scanner peut être équipé de l'option "Productivity Index Reporting™" qui permet la collecte de données sur l'index de lecture des codes à barres scannés. Ces données peuvent être transmises vers le Terminal POS où elles pourront être facilement exploitables par le service informatique afin d'améliorer la qualité du code à barres en rayon.
Pour plus d'informations sur la manière d'activer PIR sur vos scanners, merci de vous reporter au Product Reference Guide (PRG).
Productivity Index Reporting
™
Option — Ihr scanner kann optional mit der Funktion Productivity Index Reporting™ ausgestattet werden. Diese Funktion sammelt Daten zur Lesbarkeit von Barcodes. Diese Daten können ans POS Terminal übermittelt werden. Dort können die
Daten durch die MIS Abteilung zur Verbesserung der Barcodequalität sortiert werden.
Für weitere Informationen, wie Sie das Productivity Index Reporting in Ihrem Scanner aktivieren können, entnehmen Sie dem Product Reference Guide (PRG).
Opzione Indice di Produttività — Il scanner può essere fornito con l'opzione Productivity Index
Reporting . Quest'opzione permette il controllo della qualità dei barcode letti dello scanner. Questi dati possono essere trasmessi al POS dove possono essere facilmente analizzati dai sistemi informativi per migliorare la qualità dei barcode stessi.
Per maggiori informazioni su come abilitare il Productivity Index Reporting nel Scanner far riferimento al Product Reference Guide (PRG).
Opcion de Productivity Index Reporting — Su escaner puede ser epuipado con el opcional
Indice de Productivity Index Reporting™. Esta funcion permite colectar datos en el indice de la lectura de los codigos de barras por el escaner. Estos datos pueden ser transmitidos a la
Terminal POS donde puede ser facilmente clasificado por el departamento de MIS para meforar la calidad de el codigo de barra en la parte frontera.
Para informacion adicional en como abilitar su escaner con el Indice de Productividad
Reportada, por favor referirse a la Guia de Referencia de el Producto (PRG).
Opção de Informe de Índice de Produtividade (Productivity Index Reporting
TM
) — O seu scanner pode estar equipado com a opção do Informe de Índice de Produtividade. Esta opção permite coletar o dado do índice de leitura dos códigos de barras lidos pelo scanner. Este dado pode ser transmitido para o terminal PDV, aonde pode ser fácilmente depurado para ações pelo Departamento de Sistemas para melhorar a qualidade dos códigos de barras na frente de caixas.
Para informações adicionais ou como habilitar o Informe do Índice de Produtividade em
Quick Reference Guide 29
seu scanner, por favor consultar o Guia de Referência do Produto (PRG - Product Reference
Guide).
30 Magellan™ 2300HS
Appendix A. — Warranty
Datalogic warrants to Customer that Datalogic's products will be free from defects in materials and workmanship for a period of 1 year from product shipment.
Warranty Coverage
Datalogic warrants that the goods delivered under these General Terms for the
Sale of Goods shall be free from defects in materials and workmanship under normal and proper use during the Warranty Period (as defined below). Datalogic’s liability under this warranty is limited to furnishing the labor and parts necessary to remedy any defect covered by this warranty and restore the product to its normal operating condition. Repair or replacement of product during the warranty does not extend the original warranty term. Products are sold on the basis of specifications applicable at the time of manufacture and Datalogic has no obligation to modify or update products once sold. The warranty period shall extend from the date of shipment from Datalogic for the duration published by Datalogic for the product at the time of purchase (“Warranty Period”).
If, during the Warranty Period, Datalogic determines that a product has defects in material or workmanship, Datalogic shall, at its sole option repair or replace the product without additional charge for parts and labor, or give a credit for the defective products duly returned to Datalogic. To perform repairs, Datalogic may use new or reconditioned parts, components, subassemblies or products that have been tested as meeting applicable specifications for equivalent new material and products. Buyer will allow Datalogic to scrap all parts removed from the repaired product. Datalogic warrants repaired hardware devices only, against defects in workmanship and materials on the repaired assembly for a 90 day period starting from the date of shipment of the repaired product from Datalogic or until the expiration of the original Warranty Period, whichever is longer. Datalogic does not guarantee, and it is not responsible for, the maintenance of, damage to, or loss of configurations, data, and applications on the repaired units and at its sole discretion can return the units in the “factory default” configuration or with any software or firmware update available at the time of the repair (may be newer than the firmware or software installed during the manufacture of the product). Buyer accepts responsibility to maintain a backup copy of its software and data.
Warranty Exclusions
The Datalogic Warranty shall not apply to:
(i) any product which has been damaged, modified, altered, repaired or upgraded by other than Datalogic service personnel or its authorized representatives;
Quick Reference Guide 31
(ii) defects or damages caused by any third parties’ tort committed against the
Buyer.
(iii) any claimed defect, failure or damage which Datalogic determines was caused by faulty operations, improper use, abuse, misuse, wear and tear, negligence, improper storage or use of parts or accessories not approved or supplied by Datalogic;
(iv) any claimed defect or damage caused by the use of product with any other instrument, equipment or apparatus;
(v) any claimed defect or damage caused by the failure to provide proper maintenance, including but not limited to cleaning the upper window in accordance with product manual or the replacement of upper window/cartridge due to scratching, stain or other degradation;
(vi) any defect or damage caused by natural or man-made disaster such as but not limited to fire, water damage, floods, other natural disasters, vandalism or abusive events that would cause internal and external component damage or destruction of the whole unit, consumable items;
(vii) any damage or malfunctioning caused by non-restoring action as for example firmware or software upgrades, software or hardware reconfigurations etc.;
(viii) any consumable or equivalent (e.g. cables, power supply, batteries, etc.).
Consumable items, such as batteries and cables, carry a 90 day warranty from time of purchase for DOA (dead on arrival) defects alone.
Datalogic specifically excludes all express warranties and makes no implied warranty that the products sold under this agreement are merchantable or are fit for any particular purpose, except such warranties expressly identified as warranties as are set forth in Datalogic's current operating manual, catalog, or written guarantee covering such product.
No affirmation of fact or promise made by Datalogic, whether in this contract or communicated otherwise, shall constitute a warranty that the goods will conform to the affirmation or promise.
Warranty Claim Process
In order to obtain service under this Warranty, Buyer must notify Datalogic (which notice shall be in writing sent by registered courier or mail) of the claimed defect before the expiration of the Warranty period and obtain from Datalogic a return authorization number for return of the product to designated Datalogic service center. Buyer shall offer Datalogic the opportunity to investigate the claim and to inspect the allegedly defective products. Failure to offer Datalogic such opportu-
32 Magellan
TM
2300HS
nity shall constitute acceptance by Buyer and waiver of all claims for defects. The products must always be returned within ten (10) days from the date of authorization issued by Datalogic. If Datalogic determines Buyer’s claim is valid, Datalogic will repair or replace product without additional charge for parts and labor.
Buyer shall be responsible for packaging and shipping the product to the designated Datalogic service center, with shipping charges prepaid. Datalogic shall pay for the return of the product to Buyer if the shipment is to a location within the country in which the Datalogic service center is located. Buyer shall be responsible for paying all shipping charges, duties, taxes, and any other charges for products returned to any other locations.
DATALOGIC'S WARRANTY, AS DESCRIBED HEREIN, IS IN LIEU OF ALL OTHER WAR-
RANTIES, EXPRESS OR IMPLIED, ORAL OR WRITTEN, STATUTORY OR OTHERWISE,
INCLUDING, WITHOUT LIMITATION, ANY IMPLIED WARRANTIES OF MERCHANT-
ABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NONINFRINGEMENT. DATA-
LOGIC SHALL NOT BE LIABLE FOR ANY DAMAGES SUSTAINED BY BUYER ARISING
FROM DELAYS IN THE REPLACEMENT OR REPAIR OF PRODUCTS UNDER THE
ABOVE. THE REMEDY SET FORTH IN THIS WARRANTY STATEMENT IS THE
BUYER’S SOLE AND EXCLUSIVE REMEDY FOR WARRANTY CLAIMS. UNDER NO
CIRCUMSTANCES WILL DATALOGIC BE LIABLE TO BUYER OR ANY THIRD PARTY
FOR ANY LOST PROFITS, OR ANY INCIDENTAL, CONSEQUENTIAL INDIRECT, SPE-
CIAL OR CONTINGENT DAMAGES REGARDLESS OF WHETHER DATALOGIC HAD
ADVANCE NOTICE OF THE POSSIBILITY OF SUCH DAMAGES. DATALOGIC'S LIABIL-
ITY FOR DAMAGES ON ACCOUNT OF A CLAIMED DEFECT IN ANY PRODUCT DELIV-
ERED BY DATALOGIC SHALL IN NO EVENT EXCEED THE PURCHASE PRICE OF THE
PRODUCT ON WHICH THE CLAIM IS BASED. DATALOGIC SHALL NOT BE LIABLE
FOR DAMAGES RELATING TO ANY INSTRUMENT, EQUIPMENT, OR APPARATUS
WITH WHICH THE PRODUCT SOLD UNDER THIS AGREEMENT IS USED.
Out of Warranty Services
For products no longer covered by warranty services, Datalogic may offer billable repair services on products, provided such products are serviceable. Buyer acknowledges and accepts that for some older products the repair may exceed the costs of manufacturing a new product and Datalogic may decline to perform repair services. Upon Buyer’s request for out of warranty services, Datalogic will evaluate the request of repair and shall provide, to the extent applicable and feasible according to the above, a cost-estimate for repairs, which will be on a time and materials basis.
Quick Reference Guide 33
Remedies
If Buyer fails, with or without cause, to furnish Datalogic with specifications and/ or instructions for, or refuses to accept deliveries of, any of the products sold under this contract, or is otherwise in default under or in repudiation of this contract or any other contract with Datalogic or fails to pay when due any invoice under this contract, then in addition to any and all remedies allowed by law, Datalogic without notice may (1) bill and declare due and payable all undelivered products under this or any other contract between Datalogic and the Buyer; and/ or (2) defer shipment under this or any other contract between the Buyer and
Datalogic until such default, breach, or repudiation is removed; and/or (3) may cancel any undelivered portion of this and/or any other contract in whole or in part (with Buyer remaining liable for damages).
Risk of Loss
Buyer shall bear risk of loss or damage for product in transit to Datalogic. Datalogic shall assume risk of loss or damage for product in Datalogic’s possession. In the absence of specific written instructions for the return of product to Buyer,
Datalogic will select the carrier, but Datalogic shall not thereby assume any liability in connection with the return shipment.
Cleaning
Exterior surfaces and scan windows exposed to spills, smudges or debris accumulation require periodic cleaning to assure best performance during scanning. Use a clean, lint-free cloth or paper towel dampened with a nonabrasive, mild, water-based window cleaner to wipe away stains, smudges, fingerprints, spills, etc. from the scan window and exterior surfaces.
34 Magellan
TM
2300HS
CAUTION
DO NOT spray cleaners directly on the scanner!
CAUTION
DO NOT use abrasive cleaning agents or abrasive pads to clean this product. Harsh chemicals, disinfectants, and cleansers can cause damage which will adversely affect scanning performance.
Quick Reference Guide 35
NOTES
36 Magellan
TM
2300HS
©2002-2017 Datalogic S.p.A. and its Group companies • All rights reserved. • Protected to the fullest extent under U.S. and international laws.
• Copying or altering of this document is prohib-
.
ited without express written consent from Datalogic S.p.A. • Datalogic and the Datalogic logo are registered trademarks of Datalogic S.p.A. in many countries, including the U.S. and the E.U. www.datalogic.com
Datalogic USA, Inc.
959 Terry Street | Eugene | OR 97402 | USA
Telephone: (1) 541-683-5700 | Fax: (1) 541-345-7140
820088814 (Rev. G) January 2017
Pobierz
Publiczny link zaktualizowany
Publiczny link do Twojego czatu został zaktualizowany. You may view and manage your chat links after registration here.
Publiczny link do dokumentu
Reklama