Pentax K-3 III User Manual
광고
광고
e_kb582_cover_6mm.fm Page 1 Thursday, December 10, 2020 1:19 PM
RICOH IMAGING COMPANY, LTD.
1-3-6, Nakamagome, Ohta-ku, Tokyo 143-8555, JAPAN
(http://www.ricoh-imaging.co.jp)
RICOH IMAGING EUROPE
S.A.S.
RICOH IMAGING AMERICAS
CORPORATION
Parc Tertiaire SILIC 7-9, avenue Robert Schuman - B.P. 70102,
94513 Rungis Cedex, FRANCE
(http://www.ricoh-imaging.eu)
2 Gatehall Drive Suite 204, Parsippany, New Jersey 07054, U.S.A.
(http://www.us.ricoh-imaging.com)
RICOH IMAGING CANADA
INC.
5560 Explorer Drive Suite 100, Mississauga, Ontario, L4W 5M3, CANADA
(http://www.ricoh-imaging.ca)
RICOH IMAGING CHINA CO.,
LTD.
Room A 23F Lansheng Building, 2-8 Huaihaizhong Road, Huangpu District,
Shanghai, 200021, CHINA
(http://www.ricoh-imaging.com.cn)
http://www.ricoh-imaging.co.jp/english
This contact information may change without notice.
Please check the latest information on our websites.
• Specifications and external dimensions are subject to change without notice.
51553
*4RE2Z020*
Copyright © RICOH IMAGING COMPANY, LTD. 2020
R01DTL20 Printed in Philippines
SLR Digital Camera
Operating Manual
Introduction
Getting Started
Shooting
Playback
Sharing
Settings
Appendix
Model No. R03010
This Operating Manual provides information on how to use the shooting and playback functions of this camera and related precautions.
Thoroughly read this Operating Manual to make the best use of the functions available with this camera. Be sure to keep this
Operating Manual for future reference.
It is recommended to update the camera firmware to the latest version before using the camera.
For details on the latest firmware version, refer to the firmware download site.
http://www.ricoh-imaging.com/
RICOH IMAGING COMPANY, LTD.
e_kb582_cover_6mm.fm Page 2 Thursday, December 10, 2020 1:19 PM
For Using Your Camera Safely
We have paid close attention to the safety of this camera. When using this camera, we request your special attention regarding items marked with the following symbols.
Warning
This symbol indicates that ignoring this item could cause serious personal injuries.
Caution
This symbol indicates that ignoring this item could cause minor or medium personal injuries, or loss of property.
About the Camera
Warning
• Do not disassemble or modify the camera. High voltage areas are present inside the camera, with the risk of electric shock.
• If the camera interior is exposed due to dropping or otherwise damaging the camera, never touch the exposed portion. There is a risk of electric shock.
• Do not aim the camera at the sun or other strong light sources when taking images or leave the camera sitting in direct sunlight with a lens cap off. Doing so may cause the camera to malfunction or cause a fire.
• Do not look at the sun or other strong light sources through a lens. Doing so may lead to a loss of eyesight or cause vision to be impaired.
• If any irregularities occur during use, such as smoke or a strange odor, stop use immediately, remove the battery or the AC adapter, and contact your nearest service center. Continued use can cause a fire or electric shock.
Caution
• Some portions of the camera heat up during use. There is a risk of low temperature burns when holding such portions for long periods.
• Should the monitor be damaged, be careful of glass fragments. Also, be careful not to allow the liquid crystal to get on your skin or in your eyes or mouth.
• Depending on your individual factors or physical condition, the use of the camera may cause itching, rashes or blisters. In case of any abnormality, stop using the camera and get medical attention immediately.
About the USB Power Adapter
Warning
• Wipe off the power plug if it should become covered with dust.
Accumulated dust may cause a fire.
• Do not handle the power plug with wet hands. This can cause an electric shock.
• Always grip the plug section when disconnecting the power plug. Do not pull the power cord. This can damage the power cord and result in a fire or electric shock.
• If the generation of smoke or strange odor from the adapter or other abnormality occurs, immediately remove the power plug from the outlet and contact your nearest dealer or service center for repair. Do not use the adapter until it is repaired.
• If you see a lightning flash or hear thunder during use of the adapter, do not touch the power plug. This can cause an electric shock.
Caution
• Securely insert the power plug into the outlet. Failure to observe this precaution may cause a fire.
About the Optional Battery Charger and AC
Adapter
Warning
• Always use the optional battery charger and AC adapter exclusively developed for this camera, with the specified power and voltage. Using a battery charger or AC adapter not exclusive to this camera, or using the exclusive battery charger or AC adapter with an unspecified power or voltage can cause a fire, electric shock, or camera breakdown. The specified voltage is 100 to 240 VAC.
• Do not disassemble or modify the product. This can cause a fire or electric shock.
• If the generation of smoke or strange odor from the product or other abnormality occurs, immediately discontinue using and consult your nearest service center. Continued use can cause a fire or electric shock.
• If water should happen to get inside the product, consult your nearest service center. Continued use can cause a fire or electric shock.
• If you see a lightning flash or hear thunder during use of the battery charger or AC adapter, unplug the power plug and discontinue using.
Continued use can cause damage to the product, fire, or electric shock.
• Wipe off the power plug if it should become covered with dust.
Accumulated dust may cause a fire.
Caution
• Do not place or drop heavy objects on or forcefully bend the AC plug cord. Doing so may damage the cord. Should the AC plug cord be damaged, consult your nearest service center.
• Do not touch or short-circuit the terminal area of the AC plug cord while the cord is plugged in.
• Do not handle the power plug with wet hands. This can cause an electric shock.
• Do not drop the product, or subject it to violent impact. This can cause the product to breakdown.
About the Rechargeable Lithium-ion Battery
Warning
• If any leakage from the battery should come in contact with your eyes, do not rub them. Flush your eyes with clean water and get medical attention immediately.
Caution
• Only use the specified battery with this camera. Use of other batteries may cause an explosion or fire.
• Do not disassemble the battery. Disassembling the battery may cause an explosion or leakage.
• Remove the battery from the camera immediately if it becomes hot or begins to smoke. Be careful not to burn yourself during removal.
• Keep wires, hairpins, and other metal objects away from the + and - contacts of the battery.
• Do not short the battery or dispose of the battery in fire. This can cause an explosion or fire.
• If any leakage from the battery should come in contact with skin or clothing, it may cause irritation to the skin. Wash the affected areas thoroughly with water.
• Precautions for D-LI90 Battery Usage:
- USE ONLY THE CAMERA OR SPECIFIED CHARGER TO CHARGE
THE BATTERY. RISK OF FIRE AND BURNS.
- DO NOT INCINERATE.
- DO NOT DISASSEMBLE.
- DO NOT SHORT CIRCUIT.
- DO NOT EXPOSE TO HIGH TEMP. (140°F / 60°C)
- SEE MANUAL.
• Lithium-Ion batteries are recyclable.
You can help preserve our environment by returning your used rechargeable batteries to the collection and recycling location nearest you.
For more information regarding recycling of rechargeable batteries, call toll free 1-800-822-8837, or visit http://www.call2recycle.org/.
Keep the Camera and its Accessories out of the
Reach of Small Children
Warning
• Do not place the camera and its accessories within the reach of small children.
1. If the product falls or is operated accidentally, it may cause serious personal injuries.
2. Wrapping the strap around a neck may cause suffocation.
3. To avoid the risk of a small accessory such as the battery or memory cards from being swallowed by mistake, keep them out of the reach of small children. Seek medical attention immediately if an accessory is accidentally swallowed.
1
2
How to Use This Manual
1
Introducing the K-3 Mark III ..............p.8
Gives you an overview of the K-3 Mark III.
Read this and get to know your K-3 Mark III!
Checking the Contents of the Package .....p.8
Names and Functions of the Working
Parts .............................................................p.9
Display Indicators .......................................p.12
How to Change Function Settings .............p.18
Menu List ......................................................p.22
2
Getting Started ........................................p.37
Explains how to get your K-3 Mark III ready for shooting as well as basic operations.
Attaching the Strap .....................................p.37
Attaching a Lens .........................................p.37
Using the Battery and Charger ..................p.38
Inserting a Memory Card ............................p.41
Initial Settings ..............................................p.42
Basic Shooting Operation ..........................p.44
Reviewing Images .......................................p.47
3
Taking Images .........................................p.48
Once you’ve confirmed that the camera works properly, try out the camera and take lots of images!
Configuring the Capture Settings ..............p.48
Taking Still Images ......................................p.49
Recording Movies .......................................p.54
Setting the Exposure ..................................p.57
Setting the Focus Method ..........................p.59
Selecting the Drive Mode ............................p.66
Setting the White Balance ..........................p.74
Using a Flash ...............................................p.77
Controlling the Image Finishing Tone .......p.78
Correcting Images .......................................p.80
4
Playback Functions ..............................p.85
Explains various operations for playing back and editing images.
Using the Playback Functions ...................p.85
Changing the Playback Method .................p.85
Organizing Files ..........................................p.88
Editing and Processing Images .................p.91
5
Sharing Images .......................................p.97
Explains how to connect your K-3 Mark III to a computer or communication device to operate the camera and use images in the camera.
Using the Camera with a Computer ...........p.97
Using the Camera with a Communication
Device ...........................................................p.99
6
Changing the Settings ........................p.100
Explains how to change other settings.
Camera Settings ..........................................p.100
File Management Settings ..........................p.111
7
Appendix ....................................................p.115
Provides other resources to get the most from your
K-3 Mark III.
Restrictions on the Combinations of Special
Functions .....................................................p.115
Functions Available with Various
Lenses ..........................................................p.116
Functions when Using an External
Flash .............................................................p.119
Using the GPS Unit .....................................p.121
Troubleshooting ..........................................p.123
Main Specifications .....................................p.126
Index .............................................................p.131
Care to be Taken During Handling ............p.135
WARRANTY POLICY ...................................p.138
There is a possibility that the illustrations and the display screen of the monitor in this manual are different from the actual ones.
3
Contents
4
How to Use This Manual .........................2
Introducing the K-3 Mark III .....................8
Checking the Contents of the Package ..............8
Names and Functions of the Working Parts ......9
Operating Controls ....................................................... 10
Display Indicators ............................................... 12
Monitor ......................................................................... 12
LCD Panel and Viewfinder ........................................... 16
Electronic Level ........................................................... 18
How to Change Function Settings .................... 18
Using the Direct Keys .................................................. 18
Using the Smart Function ............................................ 19
Using the Control Panel ............................................... 20
Using the Menus .......................................................... 20
Menu List ............................................................. 22
A Still Image Setting Menus ...................................... 22
B Movie Setting Menus ............................................. 25
C Playback Setting Menus ........................................ 27
E Customization Menus ............................................. 28
D Setup Menus .......................................................... 34
Getting Started .......................................37
Attaching the Strap ............................................ 37
Attaching a Lens ................................................. 37
Using the Battery and Charger .......................... 38
Inserting/Removing the Battery ................................... 38
Charging the Battery .................................................... 39
Using the AC Adapter .................................................. 41
Inserting a Memory Card ...................................41
Initial Settings ..................................................... 42
Turning the Camera On ............................................... 42
Setting the Display Language, Date and Time, and
Color ............................................................................ 43
Formatting a Memory Card .......................................... 43
Basic Shooting Operation ................................. 44
Shooting with the Viewfinder ........................................ 44
Shooting while Viewing the Live View Image ............... 46
Reviewing Images ..............................................47
Taking Images ........................................48
Configuring the Capture Settings .....................48
Memory Card Recording Settings ................................ 48
Still Image Capture Settings ........................................ 48
Movie Capture Settings ................................................ 49
Taking Still Images ............................................. 49
Exposure Modes .......................................................... 50
EV Compensation ........................................................ 54
Recording Movies ............................................... 54
Playing Back Movies .................................................... 56
Setting the Exposure ..........................................57
ISO Sensitivity .............................................................. 57
AE Metering ................................................................. 59
Setting the Focus Method .................................. 59
Setting the Autofocus when Shooting with the
Viewfinder .................................................................... 60
Setting the Autofocus when Shooting with
Live View ...................................................................... 62
Fine-tuning the Autofocus ............................................ 64
Checking the Depth of Field (Preview) ........................ 65
Selecting the Drive Mode ................................... 66
Continuous Shooting .................................................... 67
Bracketing .................................................................... 67
Depth of Field Bracketing ............................................. 68
Motion Bracketing ........................................................ 69
Mirror Lock-up Shooting ............................................... 69
Multi-exposure ............................................................. 70
Interval Shooting .......................................................... 71
Interval Composite ....................................................... 72
Self-timer ..................................................................... 73
Remote Control ............................................................ 73
Setting the White Balance .................................74
Adjusting the White Balance Manually ........................ 76
Adjusting the White Balance with Color
Temperature ................................................................ 76
Using a Flash ......................................................77
Connecting a Flash ...................................................... 77
Setting the Flash Mode ................................................ 77
Controlling the Image Finishing Tone ..............78
Custom Image ............................................................. 78
Digital Filter .................................................................. 79
Correcting Images ..............................................80
Adjusting the Brightness .............................................. 80
Adjusting the Lens Properties ...................................... 81
Adjusting the Image Quality Level and Texture ........... 82
Reducing Blurring of Images ....................................... 83
Correcting the Skew of Images .................................... 84
Fine-tuning the Composition ........................................ 84
Playback Functions ...............................85
Using the Playback Functions .......................... 85
Setting the Operation in the Playback Mode ............... 85
Changing the Playback Method ........................ 85
Displaying Multiple Images .......................................... 85
Displaying Images by Folder or Shooting Date ........... 87
Connecting the Camera to an AV Device .................... 87
Organizing Files ..................................................88
Deleting Images ........................................................... 88
Protecting Images ........................................................ 89
Rotating Images ........................................................... 89
Copying Images ........................................................... 90
Transferring Images ..................................................... 90
Saving the RAW Data .................................................. 91
Editing and Processing Images ........................ 91
Processing Images with Digital Filters ......................... 91
Developing RAW Images ............................................. 92
Changing the Image Size ............................................ 93
Correcting JPEG Images ............................................. 94
Editing Movies .............................................................. 96
Sharing Images ......................................97
Using the Camera with a Computer .................. 97
Setting the Connection Mode ....................................... 97
Copying an Image on the Memory Card ...................... 97
Installing the Provided Software .................................. 98
Operating the Camera with a Computer ...................... 98
Using the Camera with a Communication
Device .................................................................. 99
Changing the Settings .........................100
Camera Settings ...............................................100
Saving Frequently Used Settings ............................... 100
Customizing the Operating Controls .......................... 102
Setting the Monitor Display, Indicator Lamp
Illumination, and Sound Effects ................................. 107
Selecting Settings to Save in the Camera ................. 111
File Management Settings ............................... 111
Specifying the Folder/File Settings ............................ 111
Setting the Copyright Information .............................. 114
Appendix...............................................115
Restrictions on the Combinations of Special
Functions .......................................................... 115
Functions Available with Various Lenses ......116
Using the Aperture Ring ............................................. 118
Setting the Focal Length ............................................ 119
Functions when Using an External Flash ......119
Using the GPS Unit ........................................... 121
Shooting Celestial Bodies (ASTROTRACER) ........... 121
Troubleshooting ...............................................123
Sensor Cleaning ........................................................ 124
Error Messages .......................................................... 125
Main Specifications ..........................................126
Camera ...................................................................... 126
USB Power Adapter AC-U1/AC-U2 ........................... 129
5
Operating Environment for USB Connection and
Provided Software ..................................................... 130
Index .................................................................. 131
Care to be Taken During Handling .................. 135
WARRANTY POLICY ........................................ 138
6
Regarding copyrights
Images taken with this camera that are for anything other than personal enjoyment cannot be used without permission according to the rights as specified in the Copyright Act.
Please take care, as there are cases where limitations are placed on taking images even for personal enjoyment during demonstrations, performances or of items on display.
Images taken with the purpose of obtaining copyrights also cannot be used outside the scope of use of the copyright as laid out in the Copyright Act, and care should be taken here also.
To users of this camera
• Do not use or store this camera in the vicinity of equipment that generates strong electromagnetic radiation or magnetic fields. Strong static charges or the magnetic fields produced by equipment such as radio transmitters could interfere with the monitor, damage the stored data, or affect the camera’s internal circuitry and cause camera misoperation.
• The liquid crystal panel used for the monitor is manufactured using extremely high precision technology.
Although the level of functioning pixels is 99.99% or better, you should be aware that 0.01% or fewer of the pixels may not light up or may light up when they should not.
However, this has no effect on the recorded image.
• The Shake Reduction (SR) mechanism of this camera uses the PENTAX original technology and moves the image sensor to an appropriate position at high speed with a magnetic force, which reduces image blurring caused by camera motion. A rattling sound is made when the camera is shaken, for example, by changing its orientation, but this is not a malfunction.
• In this manual, the generic term “computer(s)” refers to either a Windows
®
PC or a Mac.
• In this manual, the term “battery(ies)” refers to any type of batteries used for this camera and its accessories.
Regarding User Registration
In order to better serve you, we request that you complete the user registration which can be found on our website.
Thank you for your cooperation.
http://www.ricoh-imaging.com/registration/
Introducing the K-3 Mark III
Getting Started
Taking Images
Playback Functions
Sharing Images
Changing the Settings
Appendix
7
1
Checking the Contents of the Package
Hot shoe cover F
K
(Installed on the camera)
Eyecup F
U
(Installed on the camera)
ME viewfinder cap Sync socket 2P cap
(Installed on the camera)
Body mount cap K II
(Installed on the camera)
Triangular ring and protective cover
(Installed on the camera)
Battery grip terminal cover
(Installed on the camera)
Rechargeable lithium-ion battery D-LI90
USB power adapter
AC-U1 or AC-U2*
* Differs depending on the region.
Power plug USB cable
I-USB166
Strap
O-ST162
8
Operating Manual (this manual) Wireless Communication Guide
Lenses You Can Use
Lenses that can be used with this camera are D FA, DA, DA L, FA, and FA J lenses and lenses that have an 9 (Auto) position
on the aperture ring. To use any other lens or accessory, see p.116.
Names and Functions of the Working Parts
Image plane indicator
Microphone
Speaker
AF assist light
Lens mount index
Self-timer lamp/Remote control receiver
Lens unlock button
Viewfinder
Dial indicator
Eye sensor
Terminal cover
Monitor
USB terminal (USB Type-C)
HDMI ® terminal (Type D)
Hot shoe
Microphone
X-sync socket
Strap lug
Mirror
AF coupler
Lens information contacts
LCD panel
Diopter adjustment dial
Self-timer lamp/Remote control receiver
Dual card slot for SD Memory Cards
Card access lamp
Cable switch terminal
Tripod socket
Microphone terminal
Headphone terminal
Battery cover unlock knob
Battery cover
Battery grip contacts
9
1
1
Operating Controls
1
2
3
4
5
6
7
8
9
0 a b c d e f g
10
1 Still image/Live View/Movie selector dial ( A / K / B dial)
Switches between shooting with the viewfinder in the A
(still image) mode, shooting with Live View in the A mode, and shooting in the B
2 Smart Function button ( U )
Press to select the function set with the Smart Function and
change settings for the selected function. (p.19)
h i j k l m n o p q
3 ISO button ( N )
Press to change the ISO sensitivity. (p.57)
4 Shutter release button ( 0 )
Press to capture images. (p.45)
In the playback mode, press halfway to switch to the capture mode.
5 Main switch
Turns the power on or off, or activates the preview function.
6 Front e-dial ( Q )
Changes the values for camera settings such as exposure.
You can change the menu type when a menu screen is
In the playback mode, use this dial to select a different image.
7 EV Compensation button ( J )
Press to change the exposure compensation value. (p.54)
8 Mode dial lock button
Press to allow the mode dial to be turned. (p.44)
9 Mode dial
Changes the capture mode. (p.49)
0 Mode dial lock release lever
Use this lever to release the mode dial lock to operate the
mode dial without pressing the mode dial lock button. (p.45)
a Shake Reduction button ( 5 )
Changes the Shake Reduction function. (p.83)
b RAW button ( O )
Temporarily changes the file format. (p.103)
c AF Mode button ( b )
Press to change the AF mode or the AF active area. (p.60)
d Focus method switch
Changes the focus method. (p.59)
e AE Metering/Delete button ( 2 / L )
Press to change the metering mode. (p.59)
In the playback mode, press to delete images. (p.47)
f Operation lock button ( 7 )
Temporarily disables button operations to prevent
g Green button ( M )
Resets the value being adjusted.
Switches to ISO Auto when adjusting the ISO sensitivity.
In the playback mode, press this button to switch between the memory cards inserted in the two slots, SD1 and SD2.
h Playback button ( 3 )
Switches to the playback mode. (p.47) Press the button
again to switch to the capture mode.
i Smart Function dial ( V )
Change settings for the function selected with the Smart
j AE Lock button ( H )
Locks the exposure value before shooting.
In the playback mode, press this button to display the
playback function selection screen. (p.85)
k AF button ( I )
Available for adjusting focus, instead of pressing 0
l Rear e-dial ( R )
Changes the values for camera settings such as exposure.
Changes the menu items when a menu screen is displayed.
You can change camera settings when the control panel is
In the playback mode, use this dial to magnify the image or
display multiple images at the same time. (p.47, p.85)
m AF point selector lever ( 6 )
Changes the AF point. (p.60) The AF point can be moved
up, down, left, right, and diagonally.
When an image is magnified during shooting with Live View or in the playback mode, use this lever to move the display area. Push the lever in to return the display area to the
center of the image. (p.46, p.47)
n Four-way controller ( ABCD )
Displays the setting screen for [Drive Mode], [Outdoor View
Setting], [White Balance], or [Custom Image]. (p.18)
When a menu or the control panel is displayed, use this controller to move the cursor or change the item to set.
o OK button ( E )
When a menu or the control panel is displayed, press this button to confirm the selected item.
p MENU button ( F )
Displays a menu. Press this button while the menu is
displayed to return to the previous screen. (p.20)
q INFO button ( G )
Changes the style of the display on the monitor. (p.13, p.14)
About the Four-way Controller
In this manual, each button of the fourway controller is indicated as shown in the illustration on the right.
1
Customization of Operating Controls
For some buttons, you can change the button function to
This manual describes the camera operation based on the default function assignment.
11
Display Indicators
1
Monitor
Capture Mode
With this camera, you can take images while looking through the viewfinder or while viewing the image on the monitor.
When using the viewfinder, you can take images while checking the status screen displayed on the monitor and looking through
the viewfinder. (p.44) When not using the viewfinder, you can
take images while viewing the Live View image displayed on the
The camera is in the “standby mode” when it is ready to shoot, such as when the status screen or Live View image is displayed.
Standby Mode
The settings for shooting are displayed.
Status Screen
SR
250
1600
01/01/2021
10:10
FF 5.6
9999
9999
1
12
12
12
2
20
23
31
3
21
24
22
25
13
15
17
4 5 6
12
7
27
26
29
28
12
18
32 33
8
14
9 10 11
16
19
30
34 35
Live View
1
37
26 2728 3 4
32
5 6 7 8 9 10 11
1600
9999
9999
16
38
13 14
17
15
32
33 34
3940
35
1
2 AE Lock
3
4 GPS positioning status
5 Bluetooth ® communication
6 Wireless LAN communication
7
8 Anti-Aliasing Filter
9
10
Auto Horizon Correction
11 Battery level
12 E-dial guide
13 Shutter speed
14 Aperture value
15
16 Operation guide for
17 EV bar scale
18
19
20 Operation guide for 5
21 Operation guide for 7
22 Operation guide for 3
23 Operation guide for O
24 Operation guide for 2
25 Operation guide for H
26
27
28
29 Outdoor View Setting
30 Focusing area (AF point)
31 Date and time/Operation guide
32
33
34 Image storage capacity
35 Card slot number
36
37 Temperature warning
38 Histogram
39 JPEG Recorded Pixels
40
t Memo
• In [Monitor Display] of the E 4 menu, you can change the
display settings of the status screen and Live View. (p.108)
• You can change the display color set in “Initial Settings” (p.42)
in [Color Settings] of [Monitor Display] in the E 4 menu.
12
Adjusting the Monitor Brightness
If the monitor display is difficult to see when you take images outdoors or in other situations, adjust the brightness of the monitor in [Outdoor View Setting] of the D 2 menu. By default,
[Outdoor View Setting] is assigned to B
Also, when shooing in a dark place for a long period of time, you can prevent eyes dazzling in dark places by using [Night
Vision Display] of the D 2 menu.
In addition, you can set [Brightness], [Saturation], [Adjust:
Blue-Amber], and [Adjust: Green-Magenta] in [Monitor
Adjustment] of the D 2 menu. [Brightness] can also be adjusted automatically. (By default, [Brightness] is adjusted
When the Camera is Held Vertically
When the camera is rotated to the vertical position, the status screen is displayed vertically.
To not display the status screen vertically, change the display rotation setting in
[Status Screen] of [Monitor Display] in the
E
SR
FF
250
5.6
1600
01/01/2021
10:10
9999
9999
Control Panel
Press G in the standby mode to display the “control panel” and change settings.
The following functions are displayed with the default setting.
A Mode
HDR Capture
Off
ISO AUTO MAX
6400
9999
9999
±1.0EV
6 7
11 12
2
1
16
21
27 28
17
22
8
13
18
23
29
9
14
19
24
3 4
20
30
25
10
15
5
26
B Mode
AF Active Area
Auto Area
9 : 59′59″
9 : 59′59″
31
13
21
39
27 28
33
23
40
32
2
1
20
34
37
29
7
35
38
4
8
36
25
5
30
26
1 Function name
2 Setting
3
4 Number of recordable still images/Movie recordable time
5 Card slot number
6 ISO Auto Upper Limit
7 Highlight Correction
8 Shadow Correction
9 Slow Shutter Speed
10 High-ISO Noise
11
12
13
14
15 Pixel Shift Resolution
16 Distortion Correction
17 Peripheral Illumination
18
19 Anti-Aliasing Filter
20
21 Memory Card Options
22
23 JPEG Recorded Pixels
24
25 Wireless LAN Setting
26 List of setting options
1
13
1
27 Camera battery level
28 Battery grip battery level
(when D-BG8 is attached)
29 Operation guide for the control panel
30 Parameter
31
32
33
34 Recording Sound Level
35 Wind Noise Reduction
36 Headphone Volume
37
38 Grid Style
39 Live View Shooting
40 Movie Recording Touch
t Memo
• Refer to “Using the Control Panel” (p.20) for how to use the
control panel.
• The functions displayed on the control panel can be changed in [Control Panel] of the E
Changing the Shooting Information Display
The shooting information display changes each time G is pressed in the standby mode.
When shooting with the viewfinder
When shooting with Live View
Status Screen Control Panel
Display Off Status Screen
Standard Information Display Control
Panel Simplified Information Display
No Information Display Standard
Information Display t Memo
• The information displayed on Live View can be customized in
[Live View] of [Monitor Display] in the E
Playback Mode
The captured image and shooting information are displayed in the single image display of the playback mode.
Press G to change the type of information displayed in the single image display.
Standard
Information
Display
Detailed
Information
Display
Captured image, file format, JPEG recorded pixels, exposure parameters, and operation guide indicators are displayed.
Detailed information on how and when the
image was taken is displayed. (p.15)
No Information
Display
Only the captured image is displayed.
t Memo
• The playback information display can be set in [Playback Info
Display] of [Monitor Display] in the E
• When the camera is turned off and on again and enters the playback mode, an image is displayed in the single image display with the information displayed last. If [Playback Info
Display] is set to Y (Off) in [Memory] of the E 5 menu, the
Standard Information Display always appears first when the camera is turned on. Also, if [Image for Playback] is set to Z
(On) in [Memory], the last image played back is displayed first
14
Detailed Information Display
Still Images
100-0001
6192x4128
00:00′23″
RR+200%
G
BB
00
00
00
00
00
00
00
1/400 F5.6
Movies
8
10 11
26
27
1
12
1314
20
28
31
32
23
29
2 3 4
24
22
5
15 16 17 18
21
33 34
38 39
25
30
353637
40 41 42
45 46 47 48 49
6 7
43
19
44
1/400 F5.6
RR+200%
G
BB
00
00
00
00
00
00
00
8
9 11
1
45 46
1314
20
28
23
29
2 3 4
50 17
51
3839
25
5
42
47 48 49
6 7
43
44
B A
Page 2
1234567890ABCDEF
1234567890ABCDEF
1234567890ABCDEF
1234567890ABCDEF
59.999′
59.999′
1/400 F5.6
1 Shooting date and time
2 Bluetooth
®
communication
3 Wireless LAN communication
4 File Format, JPEG
Movie Recorded Pixels
5 Folder number-File
6 Card slot number in use
7 Battery level
8
9
8
10 11
1
12
45 46
55
57
47
54
2 3 4
54
52
53
5
56
48
58
49
6 7
9 Image transfer status
10 Store Location Information
11 Captured image
12 Image edit
13
14
15
16
17
18 JPEG Recorded Pixels
19
20
21 Number of shots for
Interval Shooting/Interval
22 Total shooting time for
23
24 Anti-Aliasing Filter
25
26 Brightness histogram
27 RGB histogram
28
Auto Horizon Correction
29 Lens focal length
30
Pixel Shift Resolution
31
32 Focusing area (AF point)
33 Distortion Correction
34 Peripheral Illumination
35 Lateral Chromatic
Aberration Adjustment
36
37 Color Fringe Correction
38
39
40 Slow Shutter Speed
41 High-ISO Noise
42 RGB value for Filter Effect
43
44 Custom Image parameters
45 Shutter speed
46 Aperture value
47
48
49 Number of images
50 Recording Sound Level
51 Length of time of the recorded movie
52
53
54 Tampered image warning
55 Altitude
56 Lens direction
57 Latitude/Longitude
58 Universal Coordinated
Time
1
Using the Touch Panel
You can use the touch panel to select functions, set the AF
point for shooting, and perform other operations. (p.51)
When not using the touch panel
Monitor Touch Operation function, set [Monitor Touch
Operation] to [Off] in the E 3 menu.
On
Off
15
1
LCD Panel and Viewfinder
The shooting information such as the exposure value is displayed on the LCD panel and in the viewfinder.
LCD Panel
U2
U1
AUT
O
Av Tv
Sv
P
44
77
88
16
99
33
55
17
13
12
22
66
Viewfinder Display
29
28
31 32 27
30
33 34 35 36 37 38 3940 41 42 43 44 45 46
47 48
1
49 50
2 3
51
18 11
52
4
53
5
54
9 12 14 8 19 20 21 22 7 17
1 Shutter speed/
Remaining processing time for Slow Shutter
Speed Noise Reduction
Number of shots for
2 Aperture value
3
Exposure compensation value/Image storage capacity/AF Active Area
4 EV Compensation
5 EV bar scale
6 Card slot number
7 Flash Exposure
8
9 Continuous Shooting
10
11
12 Mirror Up
13
16
27
14
35 Pixel Shift Resolution
15
16 Battery level 36
17
18 Focus indicator
19
20
37
38
39
40
21
22 AE Lock
23
24 Pixel Shift Resolution
25 Anti-Aliasing Filter
41
42
43
44
45
E-Dial
Flash Exposure
Compensation
Zoom Review
46 Outdoor View Setting
26
27 Electronic level
28
29
30
31 Spot Metering Frame
32
33
34
Anti-Aliasing Filter
47
48
49
50
51
52
53
Grid Guide
54 Operation Control Lock
t Memo
• The LCD panel illumination and the viewfinder display can be changed in [LCD Panel] of the E 4 menu and [Viewfinder
Display] of the E
4 menu, respectively. (p.108, p.107)
• No. 1 to 26 for the viewfinder display are the outside-field-ofview information. The outside-field-of-view information is displayed in the viewfinder when 0 is pressed halfway, or during the meter operating time (default setting: 10 seconds). To not display the outside-field-of-view information, change the [Info Display Outside FOV] setting in [Viewfinder
Display] of the E 4 menu. You can change the meter operating time in [Meter Operating Time] of the E 5 menu.
• The functions currently enabled for the Smart Function and their settings are displayed for No. 17 and No. 33 to 53. When
U is operated, the icons of registered functions appear,
and the icon of the currently selected function blinks. (p.19)
• You can adjust the viewfinder image sharpness using the diopter adjustment dial.
1
Eye Sensor
The eye sensor detects whether the user is looking through the viewfinder in the standby mode while shooting with the viewfinder.
When the sensor detects the user’s eye, the monitor backlight turns off and the metering starts.
Eye sensor
The setting can be changed in
[Eye Sensor] of the E
The eye sensor may operate when an object is brought close to it or it is exposed to direct sunlight. It is also used for the
automatic brightness adjustment of the monitor. (p.109)
17
1
Electronic Level
The electronic level is displayed on the status screen and Live
View and in the viewfinder to check whether the camera is tilted.
The horizontal scale shows the horizontal camera angle, and the vertical scale shows the vertical camera angle, in units of
0.5°.
Example of Viewfinder Display
When the camera is level (tilt: 0°)
When the camera is tilted downward to the left by more than 5°
How to Change Function Settings
Most functions are set from the menus. Frequently used functions can also be set by operating buttons, using the Smart
Function, or selecting on the control panel. The functions set with the button operation, Smart Function, and control panel can be customized.
Using the Direct Keys
Press ABCD in the standby mode.
By default, the following functions can be set.
A Drive Mode
B
Outdoor View
Setting
C White Balance
D Custom Image
t Memo
• The functions of ABCD and other buttons such as O can be changed in [Fx Button] of the E
When the camera is held vertically and tilted downward to the right by 3° t Memo
• For the electronic level displayed in the viewfinder, you can hide the vertical camera angle by changing the [Electronic
Level Type] setting in [Viewfinder Display] of the E 4 menu.
18
Using the Smart Function
You can quickly change the settings for the five registered functions while looking through the viewfinder or displaying the
Live View.
By default, the following functions can be set.
Function
User AF
E-Dial
Drive
Crop
Grid
Guide
Setting Description
Switches between the settings of [AF
Mode], [AF Active Area], and [Hold AF
Status] specified in advance.
Changes the exposure value.
Switches between the drive modes of
[Drive] in [Drive Mode] specified in advance.
Switches between the settings of [Crop] in the A 5 menu.
Switches between the display patterns specified in advance in [Viewfinder Screen] of [Viewfinder Display] when shooting with the viewfinder.
Changes the type of grid displayed on the
Live View screen when shooting with Live
View.
Page
1
Press U , and then turn
R .
The function selection changes.
The operation guide is displayed on the status screen and Live
View.
Available operations
U Starts/ends changing the settings.
M Resets the function setting to the default setting.
2
Turn V .
The setting for the selected function changes.
t Memo
• The functions set with the Smart Function can be changed in
[Smart Function] of the E
• The setting of the last selected function can be changed with
V in the standby mode.
1
The icons of the settable functions appear in the viewfinder and on the LCD panel.
The icon of the selected function blinks.
19
1
Using the Control Panel
The shooting functions can be set.
1
Press G in the standby mode.
The control panel appears.
2
Use ABCD to select a function.
ISO Auto Upper Limit
ISO AUTO MAX
6400
3
Turn R to change the setting.
HDR Capture
Off
ISO AUTO MAX
6400
9999
9999
3200
6400
12800
25600
51200
102400
204800
409600
9999
9999
±2.0EV
Available operations
Q Changes the parameter for the selected function (when detailed settings can be made).
E
J
Displays the menu screen for the selected function.
Customizes the control panel.
4
Press F .
The screen in the standby mode reappears.
t Memo
• The functions that can be selected vary depending on the current camera settings.
• The functions displayed on the control panel can be changed by pressing J on the screen of Step 2 or changing the
[Control Panel] setting in the E
Using the Menus
Most functions can be set from the menus.
1
Press F .
The menu appears.
2
Turn Q to switch the menu type.
Focus Settings
AF with Viewfinder
AF with Live View
AF Assist Light
AE Metering
Face Priority AE
Link AE and AF Point
ISO Sensitivity Setting
On
Off
A
Still image setting menus (p.22)
B In B
mode: Movie setting menus (p.25)
C
E
D
The menu type can also be switched by pressing C twice, selecting the type with AB , and pressing D twice.
3
Use AB to select a function.
Each menu type includes one to eight menus.
Turn R to switch between menus.
4
Find a function to set and press D .
The settings for the selected function are displayed.
Monitor Touch Operation
Monitor Touch Operation
LV Shooting Touch AF
Movie Touch AF
Eye Sensor
Viewfinder Display
LCD Panel
Monitor Display
On
20
5
Use AB to select a setting and press E .
The screen of Step 4 reappears.
Press F to return to the previous screen without changing the setting.
Monitor Touch Operation
On
Off
6
Press F several times to return to previous screens.
t Memo
• The menu displayed in Step 2 varies depending on the A /
K / B dial setting.
• When F is pressed, the last used menu screen appears first. To display the most appropriate menu for the camera settings at that time, set [Store Cursor Position] to [Off] in the
D 2 menu.
• The changed settings remain even after the camera is turned off. For some functions, you can set whether to keep the changed settings in [Memory] of the E
• Each menu type can be restored to the default settings in [Reset] of the
D 8 menu.
Reset
Select items to reset.
Reset Item
Execute Reset
1
21
Menu List
1
22
A
Still Image Setting Menus
Item
A 1 Focus Settings
Function
AF Mode
AF Active Area
Selects the autofocus method for shooting with the viewfinder.
Sets the AF point for shooting with the viewfinder.
AF Area Restriction Limits the range of selectable AF points.
AF.S Setting
Sets the camera operation priority for when the autofocus mode is set to [Single AF] and 0 is fully pressed.
1st Frame Action in
AF.C
Sets the camera operation priority for the first frame when the autofocus mode is set to [Continuous AF] and 0 is fully pressed.
AF with Viewfinder
Action in AF.C Cont.
Sets the camera operation priority during the continuous shooting when the autofocus mode is set to [Continuous AF].
Hold AF Status
Maintains the focus for a certain amount of time when the subject happens to move out of the selected focusing area after being focused during shooting with [Continuous AF].
Action When AF Fails Sets the camera operation for when autofocus fails.
AF with Live View
AF Point Tracking in
AF.C
Sets the method for tracking AF points when the autofocus mode is set to [Continuous AF].
Subject Recognition Prioritizes the recognized subject while autofocusing.
Catch-in Focus
Enables Catch-in Focus shooting when a manual focus lens is attached. The shutter is released automatically when the subject comes into focus.
AF Active Area
Focus Peaking
Contrast AF Options
Face Detection
Sets the AF active area (AF point) for shooting with Live
View.
Emphasizes the outline of the subject in focus and makes it easier to check the focus.
Sets the camera operation priority for when 0 is fully pressed.
Detects faces and performs autofocus for the detected faces.
Default Setting Page
Single AF
Auto Area
Off
Focus-priority
Auto
Auto
Low
Drive Lens
Type 1
On
Off
Auto Area
Off
Focus-priority
On
AF Assist Light
Item Function
Illuminates the assist light when autofocusing in dark locations.
A 2 Exposure Setting
AE Metering
Face Priority AE
Selects the part of the sensor to use for measuring brightness and determining the exposure.
Adjusts the exposure value by giving priority to the detected faces when [AE Metering] is set to [Multi-segment].
Link AE and AF Point
ISO Sensitivity
Setting
ISO Auto Upper Limit Sets the ISO sensitivity upper limit for ISO Auto.
ISO Auto Lower Limit Sets the ISO sensitivity lower limit for ISO Auto.
Min. Shutter Speed
Op.
ISO Auto with Min.
Speed
Adjusts the exposure value according to the brightness of the AF point.
Sets whether to set the minimum shutter speed automatically or manually.
Sets how to increase the sensitivity.
Minimum Shutter
Speed
Sets the shutter speed at which the ISO sensitivity is increased when [Min. Shutter Speed Op.] is set to [Shutter Speed Control].
Default Setting Page
On
Multi-segment
On
Off
6400
100
Auto
Standard
1/125
Flash Mode
Program Line
Sets the flash mode.
Flash On or
Auto Flash
Discharge
Standard
Auto EV Compensation
Selects the Program Line setting.
Automatically compensates the exposure when the correct exposure cannot be achieved with the current settings.
Off
A 3 White Balance Settings
White Balance Sets the white balance according to the light source.
Auto White
Balance
Auto Adjust. for Source
AWB in Tungsten Light
Automatically fine-tunes the white balance when the light source is specified for the white balance setting.
Sets the correction level for tungsten light when the white balance is set to [Auto White Balance].
Off
High
A 4 Shooting Settings
Drive Mode
Drive Selects the drive mode.
Single Frame
Shooting
Timer/Remote
Control
Sets whether to use the self-timer and remote control functions.
Off
1
23
1
AA Filter Simulator
Item Function
Applies a low-pass filter effect using the Shake Reduction mechanism.
HDR Capture
HDR Capture
Bracket Value
Auto Align
A 5 Image Capture Settings
Memory Card
Options
Memory Card
Options
Card Slot Sequence
Makes settings for high dynamic range shooting.
Pixel Shift Resolution
ASTROTRACER
Merges multiple images and outputs a high-definition image.
ASTROTRACER Makes settings to track and capture celestial bodies.
Precise Calibration Performs a calibration.
Sets the recording method for when two memory cards are inserted.
Selects one of the memory cards inserted in the SD1 and the SD2 slots to use when [Memory Card Options] is set to
[Sequential Use].
File Format
Crop
JPEG Recorded Pixels
JPEG Quality
RAW File Format
Color Space
A 6 Image Process Settings
Custom Image
Digital Filter
Clarity
Skin Tone
Sets the file format of images.
Sets the angle of view for shooting.
Sets the recording size of JPEG images.
Sets the quality of JPEG images.
Sets the RAW file format.
Sets the color space to use.
Sets the image finishing tone including color and contrast.
Applies a digital filter effect when taking images.
Changes the clarity of images using an image processing function.
Enhances the skin tone of images using an image processing function.
Default Setting
Off
Off
±2.0EV
On
Off
Off
—
Sequential Use
SD1
JPEG
Off q
Super Fine
PEF sRGB
Bright
Off
±0
Off
Page
24
Lens Correction
D-Range
Correction
Noise Reduction
Item Function
Distortion Correction Reduces distortions occurring due to lens properties.
Peripheral Illumin.
Corr.
Lat-Chromatic-Ab
Adj
Diffraction
Correction
Highlight Correction
Reduces peripheral light fall-off occurring due to lens properties.
Reduces lateral chromatic aberrations occurring due to lens properties.
Corrects blur caused by diffraction when using a small aperture.
Expands the dynamic range and prevents overexposed areas from occurring.
Shadow Correction
Slow Shutter Speed
NR
High-ISO Noise
Reduction
Custom Options
Expands the dynamic range and prevents underexposed areas from occurring.
Sets the noise reduction setting when shooting with a slow shutter speed.
Sets the noise reduction setting when shooting with a high
ISO sensitivity.
Sets the noise reduction level for each ISO sensitivity setting for [High-ISO Noise Reduction].
A 7 Shooting Assist
Shake Reduction
Auto Shake Reduction Off
Auto Horizon Correction
Composition Adjustment
Activates the Shake Reduction function.
Automatically sets the Shake Reduction function to [Off] when [Self-timer] or [Remote Control] is used.
Corrects horizontal tilt during still image shooting.
Allows you to adjust the composition of your image using the Shake Reduction mechanism.
Default Setting Page
Off
Off
On
On
Auto
Auto
Auto
Auto
Medium
Auto
Enable Auto
SR Off
Off
Off
B
Movie Setting Menus
Item
B 1 Focus Settings
AF with Live View
AF Active Area
Movie Mode AF
Focus Peaking
Function Default Setting Page
Sets the AF active area (AF point).
Sets the autofocus operation in B mode.
Emphasizes the outline of the subject in focus and makes it easier to check the focus.
Auto Area
Off
1
25
1
AF Assist Light
B 2 Exposure Setting
AE Metering
Item Function
Illuminates the assist light when autofocusing in dark locations.
Default Setting
On
Page
Link AE and AF Point
B 3 White Balance Settings
Selects the part of the sensor to use for measuring brightness and determining the exposure.
Sets whether to link the exposure value and the AF point in the focusing area.
White Balance Sets the white balance according to the light source.
Auto Adjust. for Source
AWB in Tungsten Light
Automatically fine-tunes the white balance when the light source is specified.
Sets the tungsten light color tone when the white balance is set to [Auto White Balance].
B 4 Shooting Settings
Remote Control
B 5 Movie Capture Settings
B 7 Shooting Assist
Shake Reduction
Sets whether to use the remote control function.
Memory Card Options
Recorded Pixels
Framerate
Recording Sound Level
Wind Noise Reduction
Headphone Volume
B 6 Image Process Settings
Custom Image
Digital Filter
D-Range
Correction
Selects one of the memory cards inserted in the SD1 and the SD2 slots for recording movies.
Sets the number of recorded pixels of the movie.
Sets the number of framerate of the movie.
Sets the sound volume level for recording.
Reduces wind noise.
Sets the sound volume when a headphone is connected.
Highlight Correction
Shadow Correction
Sets the image finishing tone including color and contrast.
Applies a digital filter effect when recording movies.
Expands the dynamic range and prevents overexposed areas from occurring.
Expands the dynamic range and prevents underexposed areas from occurring.
Activates the Shake Reduction function.
Multi-segment
Off
Auto White
Balance
Off
High
Off
SD1 z
30p
Auto
On
20
Bright
Off
Auto
Auto
On
26
Item
Auto Shake Reduction Off
C
Playback Setting Menus
Item
C 1 Playback Settings
Select Playback Card
Auto Image Rotation
Playback Order Options
Playback Sound Volume
Touch Img. Browse Effect
C 2 File Management
Delete
Protect
Image Rotation
Image Copy
File Transfer
Save RAW Data
C 3 RAW/JPEG Image Edit
Digital Filter
Cropping
C 4 RAW Image Edit
RAW Development
C 5 JPEG Image Edit
Resize
Function
Automatically sets the Shake Reduction function to [Off] when [Remote Control] is used.
Default Setting Page
Enable Auto
SR Off
Function
Selects one of the memory cards inserted in the SD1 and the SD2 slots for playing back images.
Rotates images which were captured with the camera held vertically or of which the rotation information has been changed.
Sets the image display order during playback.
Sets the sound volume during movie playback.
Sets whether to use the screen effect when the previous or next image is displayed by touch operation.
Default Setting Page
SD1
On
File No.
20
On
Deletes images.
Protects images from being accidentally erased.
Changes the rotation information of an image.
Copies images between cards in the SD1 and the SD2 slots.
Sets the transfer reservation for images to transfer to a communication device.
Saves the RAW data of a captured JPEG image.
Processes images with digital filters.
Crops out only the desired area of an image.
Develops RAW images into JPEG images and saves them as new files.
Changes the number of recorded pixels of an image.
—
—
—
—
—
—
—
—
—
—
1
27
1
Levels Adjustment
Item
WB Adjustment
Color Moiré Correction
C 6 Movie Edit
Extract Movie
Divide Movie
C 7 Save Settings from Image
Save as Manual WB
Save Cross Processing
E
Customization Menus
Item
E 1 User Mode
Save User Mode Settings
Rename User Mode
Recall User Mode Setting
Reset User Mode Settings
Exposure in User Mode
User Settings Restoration
Function
Adjusts the brightness and contrast of the highlight, midtone, and shadow areas in images.
Adjusts the white balance.
Reduces color moiré in images.
Default Setting Page
—
—
—
Saves the range specified with the start and end points as a new file.
Divides a movie into two files at the specified devision point and saves as new files.
Saves the white balance settings of a captured image as
Manual White Balance.
Saves the settings used for an image captured with [Cross
Processing] of [Custom Image] as your favorite settings.
—
—
—
—
Function
Saves frequently used capture settings in up to ten setting boxes.
Changes the name of a setting box.
Assigns the saved settings to O to 5 of the mode dial.
Resets the settings saved in a setting box.
Temporarily changes the exposure mode when the mode dial is set to one of the modes from O to 5 .
Set the timing to restore the settings saved in the user mode.
Default Setting Page
—
—
—
—
G
Type 1
28
Item
E 2 Customize Controls
Fx Button
AF/AE Lock
Settings
Preview Dial
Shake Reduction
Button
RAW Button
Operation Lock
Button
AE Metering Button
Playback Button
AE Lock Button
Up Button
Down Button
Left Button
Right Button
One Push File
Format
Shake Reduction
Operation Control
Lock
Still Image
Movie
Preview Method
Digital Preview
Settings
Function
Sets the functions to use during Digital Preview.
Default Setting
Customizes the button functions.
Sets the file format to change to with the One Push File
Format function.
Sets the Shake Reduction operation switching pattern when the button is pressed.
Sets the type of buttons to lock the operation when the button is pressed.
Sets the autofocus operation when halfway or I is pressed in A
0
mode.
is pressed
Shake
Reduction
One Push File
Format
Operation
Control Lock
AE Metering
Playback
Mode
AE Lock
Drive Mode
Outdoor View
Setting
White Balance
Custom Image
RAW+JPEG,
On
OFF→AUTO
→PAN
Exposure
Change Lock
Enable AF,
Enable AF
Off
Sets the autofocus operation when 0 is pressed halfway in B mode.
Sets the camera operation for when the main switch is turned to the U position.
Enable AF
Optical
Preview
All On
Page
1
29
1
30
E-Dial
Programming
Smart Function
Item
Still Image
Movie
G
H
I
J
K
L
M
N
G
I
J
K
Sets the Q / R / M / V operation for each exposure mode.
Sets the mode.
Q / R / M / V
Function
operation for each exposure
L
Rotation Direction Reverses the effect obtained when Q or R is turned.
HYPER P/Sv
Options
Function 1
Sets the camera operation when the camera enters the
Hyper mode in G or H mode.
Function 2
Function 3
Function 4
Function 5
Registers the functions to use with the Smart Function.
Default Setting Page
I HYPER,
J HYPER,
X G , ISO
Off, ISO, —,
J
I , Off, —,
ISO
Off, J , —,
ISO
I , J , —,
J
I , J ,
G LINE, ISO
Off, J ,
Timed exposure, ISO
Off, J , —,
ISO
Off, Off, —, J
I , Off, —,
J
Off, J , —,
J
I , J , —,
J
I , J ,
G LINE, ISO
Rotate Right
Standard
User AF
E-Dial
Drive
Crop
Grid Guide
Item
One Push ISO Auto
One Push Exposure Reset
Function
Resets to ISO Auto with N without displaying the setting screen when the ISO sensitivity can be changed with Q ,
R , and V .
Resets the compensation value with J when the exposure can be compensated with Q , R , and V .
E 3 Monitor Touch Operation
Monitor Touch Operation
LV Shooting Touch AF
Movie Touch AF
Sets whether to use the touch panel function to operate the camera.
Sets the camera operation when Touch AF is performed during shooting with Live View.
Sets the camera operation when Touch AF is performed during movie recording.
E 4 Display Customization
Eye Sensor
Viewfinder Display
LCD Panel
Link Monitor Display
Turns off the monitor backlight when the eye sensor detects the user’s eye.
AE with Eye Sensor Starts metering when the eye sensor detects the user’s eye.
Detection Sensitivity Sets the eye sensor detection sensitivity.
Viewfinder Screen Sets the display in the viewfinder.
Electronic Level
Type
Displays the electronic level in the viewfinder.
Viewfinder Light
Info Display Outside
FOV
Illumination
Brightness
Sets whether to light up the viewfinder when focusing the subject or changing the focusing area.
Displays information at the bottom outside the field of view in the viewfinder.
Sets the brightness of the LCD panel.
LCD Panel
Illumination
Sets the illumination method of the LCD panel.
Default Setting Page
Off
Off
On
AF Point
AF Point
On
Off
Medium
F1
Level+Tilt
Auto
On
High
Auto
1
31
1
Monitor Display
Item
Color Settings
Status Screen
Live View
Playback Info
Display
Grid Guide
Function
Sets the display color and style of the status screen, control panel, and menu cursor.
Sets the status screen display.
Sets the information to display when the style of the display is switched with G during shooting with Live View.
Sets the information to display when the screen is switched with G in the playback mode.
Default Setting Page
Color: 01,
Style: 1
On, On,
Level+Tilt,
Type 1
L1, Level+Tilt,
Type 1, 50Hz
All Off
Sets the type and color of grid lines.
4x4 Grid,
Black
1sec.
Instant Review
Zoom Review
Warning Display
E 5 Function Customization
Control Panel
Display Time
Zoom Review
Sets the Instant Review display time.
Displays the magnified image with R during Instant
Review.
Save RAW (RAW
Button)
Delete Img. (Delete
Btn.)
Manage Img. (AE-L
Btn.)
Histogram
Saves the RAW data with O during Instant Review.
Deletes the displayed image with L during Instant Review.
Displays the file management screen with H during Instant
Review.
Displays the histogram during Instant Review.
Highlight Alert
Quick Zoom
Sets overexposed areas to blink red during Instant Review.
Sets the display magnification and trigger operation for the quick zoom function during Instant Review.
Focus Magnification Zooms the display centering on the focused point.
Release Lock
Warning
Displays the warning icon when the shutter cannot be released.
Release Timer
Warning
Image Processing
Warning
Displays the warning icon when the shutter cannot be released immediately because [Self-timer] or [Remote control] is used.
Displays the warning icon when the image processing takes a long time after shooting.
Customizes the functions displayed on the control panel.
On
On
On
On
Off
Off
100%
On
On
On
On
—
32
Memory
Item
ISO Sensitivity
EV Compensation
Flash Mode
Flash Exposure Comp.
White Balance
Drive
Timer/Remote Control
HDR Capture
Pixel Shift Resolution
Crop
Custom Image
Digital Filter
Clarity
Function
Determines which settings to save when the power is turned off.
Skin Tone
Composition Adjustment
Shooting Info Display
Playback Info Display
Image for Playback
Operation Control
Lock
Outdoor View Setting
Night Vision Display
EV Steps
ISO Sensitivity Steps
Meter Operating Time
Bulb (B) Mode Options
X Mode Sync Speed
E 6 Function Customization
Sets the adjustment steps for the exposure.
Sets the adjustment steps for the ISO sensitivity.
Sets the time to continue metering after it is started.
Sets the camera operation when 0 is pressed in M mode.
Sets the flash sync speed.
AF with Remote Control
Color Temperature Steps
Sets whether to use autofocus when shooting with the remote control unit.
Sets the adjustment steps for [Color Temperature] of the white balance.
Default Setting Page
On
On
On
On
On
On
On
Off
Off
On
On
Off
Off
Off
On
On
On
Off
On
Off
Off
1/3 EV Steps
1 EV Step
10sec.
Bulb
1/200
Off
Kelvin
1
33
1
Item
MF Lens Focal Length
Length Input on Startup
Save Rotation Info
Using Aperture Ring
Aperture Info Record
E 7 Function Customization
AF Fine Adjustment
34
D
Setup Menus
D 1 File Setting
Format
Create New Folder
Item
Folder Name
File Name
Sequential Numbering
Reset Numbering
Copyright Information
D 2 Monitor Settings
Store Cursor Position
Guide Display
Function
Sets the focal length when using a lens of which focal length information cannot be obtained.
Sets whether to input the focal length when the camera is turned on with a lens of which focal length information cannot be obtained.
Sets the angle recorded as rotation information in captured images.
Releases the shutter even when the lens aperture ring is set to a position other than 9 (Auto).
Records the manually input aperture value in captured images when the lens aperture value cannot be obtained.
Default Setting Page
35mm
On
Auto
Off
Off
Precisely fine-tunes lenses with the camera’s autofocus system.
Off
Function
Formats a memory card.
Creates a new folder on the memory card.
Sets the folder name in which images are stored.
Sets the file name assigned to an image.
Continues the sequential numbering for the file name when a new folder is created.
Resets the file number setting and returns to 0001 each time a new folder is created.
Sets the photographer and copyright information embedded in the Exif data.
—
—
Date
IMGP
Folder & File
—
Off
Saves the last menu displayed on the monitor and displays it again the next time F is pressed.
Displays the setting change status when the Fx button is operated.
Default Setting Page
On
On
Item
Monitor Adjustment
Adjusts the brightness, saturation, and color tone of the monitor.
Function
Outdoor View Setting
Night Vision Display
Exp. Simulation LV
Adjusts the brightness of the monitor for outdoor shooting.
Changes the monitor display color to red for shooing at night or in a dark place.
Adjusts the screen brightness according to the exposure setting when shooting with Live View.
D 3 Lamp/Sound Settings
Indicator Lamps
Self-timer
Remote Control
Sets whether to light up the self-timer lamp when shooting with the self-timer.
Sets whether to light up the self-timer lamp when shooting with the remote control unit.
GPS Unit
Sound Effects Volume
Electronic Shutter
Sound
In-focus
AE Lock
Sound Effects
Setting
Count Down
Sets whether to light up the lamps when the GPS unit is attached to the camera.
Sets the sound volume of beep sounds.
Makes a shutter sound while shooting with the electronic shutter.
Makes a beep sound when the subject is focused.
Makes a beep sound when the exposure value is locked.
Makes a beep sound during the countdown for shooting with the self-timer or remote control unit (shutter release after 3 seconds).
Mirror Up Makes a beep sound during the mirror lock-up shooting.
Fx Button Operation Makes a beep sound when the Fx button is operated.
D 4 Communication Settings
USB Setting
Bluetooth Setting
Action Mode
Sets the USB connection mode when connecting to a computer.
Sets whether to use the Bluetooth
®
communication function.
Pairing
Performs pairing between the camera and a communication device.
Communication Info.
Displays [Device Name] of the camera.
Wireless LAN
Setting
Action Mode
Sets whether to use the wireless LAN communication function.
Communication Info.
Displays [SSID], [Password], and [MAC Address] of the camera.
Default Setting Page
Brightness:
Auto Brt. Adj.,
Others: 0
Off
Off
On
On
On
On
3
On
On
On
On
On
On
MTP
Off
—
—
Off
—
Separate
1
35
1
36
Smartphone Link
GPS Settings
Item
Store Location Info.
Auto Image Transfer
Auto Resize
Image Transfer while Off
Function
Records the location information of the communication device in captured images.
Automatically transfers captured images to the communication device after shooting.
Reduces the number of recorded pixels of images before transferring them.
Continues the image transfer even when the camera is turned off midway through the transfer.
Performs a calibration of electronic compass information when the optional GPS unit is attached to the camera.
D 5 Power Supply Settings
Auto Power Off
Power Saving Mode
Battery Grip Settings
USB Power Supply to Ext.
D 6 Maintenance
Sets the time until the camera turns off automatically if no operations are made for a certain period of time.
Controls the display time of the status screen to reduce battery consumption.
Sets the camera operation for when the optional battery grip is attached to the camera.
Supplies power to an external device via the USB cable.
Firmware Info/Options
Certification Marks
Pixel Mapping
Dust Removal
Sensor Cleaning
Displays the camera’s firmware version. You can check the current firmware version before running an update.
Displays the certification marks of conformance to wireless technical standards.
Maps out and corrects defective pixels on the sensor.
Cleans the sensor by applying high-frequency (ultrasonic) vibrations.
Locks the mirror in the up position for cleaning the sensor with a blower.
D 7 Language/Date Setting
Language/ W
Date Adjustment
D 8 Reset
Changes the display language.
Sets the date and time and the display format.
Reset
Resets the settings of the direct keys, Smart Function, menu items, and control panel items.
*1 See RICOH IMAGING website for details.
Default Setting Page
Off
Off
Off
Off
—
1min.
High
Auto
—
—
—
—
On, On
—
English
01/01/2021
—
Separate
Separate guide
—
Attaching the Strap
1
Pass the end of the strap through the triangular ring.
2
Secure the end of the strap on the inside of the clasp.
When the Battery Grip is Used
When the optional Battery Grip
D-BG8 is used, you can attach one end of the strap to the battery grip.
Attaching a Lens
1
Make sure that the camera is turned off.
2
Remove the body mount cap ( 1 ) and lens mount cover ( 2 ).
Turn the body mount cap counterclockwise while pressing the lens unlock button ( 3 ).
After removing the cover, be sure to put the lens down with the lens mount side facing upward.
3
1
3
Align the lens mount indexes (red dots: 4 ) on the camera and the lens, and secure by turning the lens clockwise until it clicks.
4
To remove the lens
Attach the lens cap, and then turn the lens counterclockwise while pressing the lens unlock button.
2
2
37
2 u Caution
• When attaching or removing the lens, choose an environment that is relatively free of dirt and dust.
• Keep the body mount cap attached on the camera when a lens is not attached.
• Be sure to attach the lens mount cover and lens cap to the lens after removing it from the camera.
• Do not insert your fingers inside the lens mount of the camera or touch the mirror.
• The camera body and lens mount incorporate lens information contacts. Dirt, dust, or corrosion may damage the electrical system. Please contact your nearest service center for professional cleaning.
• When a retractable lens is attached and is not extended, you cannot take images or use some functions. If the lens is retracted during shooting, the camera stops working. Refer to
“How to Use a Retractable Lens” (p.46) for details.
• We assume no responsibility nor liability for accidents, damages, and malfunctions resulting from the use of lenses made by other manufacturers.
t Memo
• Refer to “Functions Available with Various Lenses” (p.116) for
details on the functions of each lens.
Using the Battery and Charger
Use the battery D-LI90 exclusively developed for this camera.
Inserting/Removing the Battery
u Caution
• Insert the battery correctly. If the battery is inserted incorrectly, it may not be removed.
• Wipe the electrodes of the battery with a soft dry cloth before inserting.
• Do not remove the battery while the power is on.
• Be careful as the camera or battery may become hot after the camera has been used continuously for a long period of time.
• Remove the battery when you do not use the camera for a long period of time. The battery may leak and damage the camera if left installed during prolonged periods of non-use. If the removed battery is not used for six months or longer, charge the battery for about 30 minutes before storing it. Be sure to recharge the battery every six to twelve months.
• Store the battery in a location where the temperature will remain at or below room temperature. Avoid locations with high temperatures.
• The date and time may be reset if you leave the battery out of the camera for long periods of time. If this happens, set the current date and time again.
1
Open the battery cover.
Lift the battery cover unlock knob, turn it towards OPEN to unlock, and then pull the cover open.
1
2
38
2
Face the A mark on the battery towards the outside of the camera, and insert the battery until it locks into place.
To remove the battery, push the battery lock lever in the direction of 3 .
3
Close the battery cover.
Turn the battery cover unlock knob towards CLOSE to lock, and then put it down.
5
3
4 t Memo
• The battery level may not be displayed properly if the camera is used at low temperatures or when performing continuous shooting for a long time.
• Battery performance temporarily decreases as the temperature decreases. When using the camera in cold climates, have extra batteries at hand and keep them warm in your pocket. Battery performance will return to normal at room temperature.
• Have extra batteries ready when traveling overseas or taking a lot of images.
• When the optional Battery Grip D-BG8 is used, you can set the priority order of battery use in [Battery Grip Settings] of the
D 5 menu.
Charging the Battery
1
Insert the power plug to the USB power adapter until it clicks.
2
Connect the USB cable to the USB power adapter.
3
Plug the USB power adapter into the power outlet.
4
3
2
Make sure that the main switch of the camera is set to [OFF], and open the terminal cover.
5
Connect the USB cable to the USB terminal.
The self-timer lamp on the back of the camera turns on while charging (blinks once at intervals of 5 seconds), and turns off when the battery is fully charged.
2
39
2 u Caution
• If the camera is turned on while charging, the charging stops.
• If the self-timer lamp continues to blink rapidly, make sure that the main switch is set to [OFF], remove the USB cable and battery from the camera, and start over from the beginning. If this does not improve the situation, contact your nearest service center.
• If the battery starts to run down more quickly even after being charged, the battery may have reached the end of its service life. Replace the battery with a new one.
t Memo
• The maximum charging time is approximately 4.5 hours (it depends on temperature and remaining battery power).
Charge the battery in a location where the temperature is between 10°C and 40°C (50°F and 104°F).
• You can also charge the battery by connecting the camera to a computer using the USB cable and turning the camera off.
• You can also charge the battery using the optional Battery
Charger D-BC177.
• When the optional Battery Grip D-BG8 is used, you can charge the battery in the battery grip. The battery set in
[Battery Grip Settings] of the D 5 menu of the camera is charged first. The self-timer lamp blinks twice continuously while charging the battery in the camera, and three times continuously while charging the battery in the battery grip.
• You can also charge the battery by connecting a commercial portable charger to the camera with a USB cable.
Supplying Power to Another Device
You can supply power to another device using the battery of the camera via a USB cable. Select [Execute] in [USB Power
Supply to Ext.] of the D 5 menu, and turn the camera off.
This function cannot be used if the battery level is insufficient.
Power Saving Mode
The battery consumption can be reduced by controlling the display time of the status screen. Make settings in [Power
Saving Mode] of the D 5 menu.
Low
High
Off
Turns the monitor off when the time set in [Meter
Operating Time] of the E 5 menu elapses.
Performs metering for 2 seconds after Instant
Review during shooting, and turns the monitor off.
(Default setting)
Keeps the monitor on even after the metering time elapses.
40
Using the AC Adapter
We recommend the use of the optional AC Adapter Kit K-AC166 when using the camera for a long time.
1
Connect the AC adapter to the AC plug cord, and plug the cord into the power outlet.
2
Make sure that the camera is turned off, and open the terminal cover.
Inserting a Memory Card
The following memory cards can be used with this camera.
• SD Memory Card
• SDHC Memory Card
• SDXC Memory Card
In this manual, these cards are referred to as memory cards.
1
Make sure that the camera is turned off.
2
Slide the memory card cover in the direction of 1 ,
1 and then rotate it to open as shown by 2 .
2
3
Connect the USB Type-C cable of the AC adapter to the USB terminal of the camera.
u Caution
• Make sure that the camera is turned off before connecting or disconnecting the AC adapter.
• Make sure that the connections are secure between the terminals. The memory card or data may be corrupted if the connection to the power supply is lost while the card is being accessed.
• Be sure to read the manual of the AC adapter kit before using the AC adapter.
3
Insert a card all the way into each memory card slot with the memory card label facing toward the side with the monitor.
Push the memory card in once and release to remove.
2
41
2
4
Rotate the memory card cover as shown by 3 , and slide it in the direction of
4 .
4
3 u Caution
• When inserting a memory card into the memory card slot, insert it straight. Inserting the memory card at an angle or applying excessive force may damage the card or memory card slot.
• Do not remove the memory card while the card access lamp is lit.
• If the memory card cover is opened while the power is on, the camera turns off. Do not open the cover while the camera is in use.
• Use this camera to format (initialize) a memory card that is
unused or has been previously used on other devices. (p.43)
• Use a high-speed memory card when recording movies. If the writing speed cannot keep up with the recording speed, writing may stop during recording.
t Memo
• For details on how the data is recorded when two memory
cards are inserted, refer to “Memory Card Recording
• Memory cards compatible with the UHS-I/UHS-II standard can be used. However, if an UHS-II memory card is inserted in the SD2 slot, it operates at a speed equivalent to UHS-I.
Initial Settings
Turn the camera on and make the initial settings.
Turning the Camera On
1
Turn the main switch to
[ON].
The first time the camera is turned on after purchase, the
[Language/ W ] screen appears.
t Memo
• The power automatically turns off when you do not perform any operations within a set period of time. (Default setting:
1min.) You can change the setting in [Auto Power Off] of the
D 5 menu. The camera recovers from Auto Power Off when
0 or 3 is pressed.
42
Setting the Display Language, Date and
Time, and Color
1
Use AB to select the desired language in the
[Language/ W ] screen, and press E .
The selected language is set and the [Date Adjustment] screen appears.
2
Set the display format and the date and time.
Use CD to select an item and
AB to change the value.
Press F to cancel the setting.
Date Adjustment
Set the Date Format,
Date and Time.
M/D/Y
Cancel
01 / 01 / 2021 00 ： 00
OK
3
Press E .
The date and time are set and the [Color Settings] screen appears.
4
Make settings for [Color] and [Style].
Use CD to select an item and
AB to change the value.
Color Settings
Color 01
F F
Style 1
Cancel OK
Color
Style
Sets the display color of the status screen, control panel, and menu cursor.
Sets the style of the status screen and control panel.
5
Press E .
The camera switches to the capture mode and is ready to take an image.
t Memo
• You can change the settings of the display language and date and time in the D 7 menu, and the display color in [Color
Settings] of [Monitor Display] in the E
Formatting a Memory Card
1
Press F .
The menu appears.
2
Turn Q to select D .
3
Select [Format] and press
D .
The [Format] screen appears.
D 1
4
Use AB to select the memory card slot in which the memory card to format is inserted and press D .
Format
SD1
SD2
File Setting
Format
Create New Folder
Folder Name
File Name
Sequential Numbering
Reset Numbering
Copyright Information
Date
IMGP
Off
5
Use A to select [Execute] and press E .
Formatting starts. When formatting is completed, the screen of Step 4 reappears.
Deletes all data on the SD1 slot memory card.
Execute
Cancel
OK
6
Press F twice.
The screen in the capture mode reappears.
u Caution
• Do not remove the memory card while formatting, or the card may be damaged.
• Formatting deletes all data, both protected and unprotected.
t Memo
• When a memory card is formatted, the volume label “K-3 III” is assigned to the card.
2
43
2
Basic Shooting Operation
Take images in R (Scene Analyze Auto) mode in which the camera analyzes shooting conditions and automatically sets the optimal shooting settings.
Shooting with the Viewfinder
1
Remove the front lens cap by pushing the top and bottom portions as indicated in the illustration.
When a retractable lens is attached, extend the lens before turning the camera on.
y
How to Use a Retractable Lens (p.46)
2
Turn the camera on.
3
Set the A / K / B dial to
A .
4
Set the focus method switch to v .
5
Set the mode dial to R while pressing the mode dial lock button.
U2
U1
AUT
O
Av Tv
Sv
P
Mode dial lock button
B
M
X
TAv
5
U
Av Tv
U3
U2
U1
AUTO
Sv P
Dial indicator
44
You can release the mode dial lock using the mode dial lock release lever to easily operate the mode dial without having to press the mode dial lock button.
The selected capture mode is displayed on the monitor.
250
1600
FF
SR
01/01/2021
10:10
9999
9999
6
Look through the viewfinder to view the subject.
When using a zoom lens, turn the zoom ring to the right or left to change the angle of view.
7
Position the subject inside the AF frame and press
0 halfway.
Autofocus is performed.
The focus indicator ( P ) appears and you will hear a beep when the subject comes into focus.
y
Sound Effects settings (p.110)
8
Press 0 fully.
The captured image is displayed on the monitor (Instant
Review).
Available operations during Instant Review
L Deletes the image.
R to the right / E
O
Magnifies the image.
Use 6 to change the area to display.
Saves the RAW data (only when a JPEG image was taken and the data remains in the buffer).
H Displays the file management screen for deleting images, protecting images, transferring files, and saving the RAW data.
t Memo
• You can use I
to focus on the subject. (p.59)
• You can preview the image on the monitor and check the
depth of field before shooting. (p.65)
• You can set the operation and display settings for Instant
Review in [Instant Review] of the E
• When you want to lock the exposure value (AE Lock) by pressing 0 halfway, make settings in [Still Image] of
[AF/AE Lock Settings] in the E 2 menu.
Shutter/AF Button
Shooting AE Lock
Enable AF, Enable AF
No Function, Enable AF
Enable AF, Cancel AF
Shutter Halfway Press
When in Focus
Off u Caution
• Some functions are not available in R mode.
2
45
2
Shooting while Viewing the Live View Image
1
Set the A / K / B dial to
K
in Step 3 of “Shooting with the Viewfinder” (p.44).
The Live View image is displayed on the monitor.
2
View the Live View image.
Available operations
E
R
Magnifies the image and returns to 1× image display.
Changes the magnification (up to 16×).
6 Change the area to display.
Push the lever in to return the display area to the center of the image.
3
Position the subject inside the AF frame on the monitor and press 0 halfway.
The AF frame turns green and you will hear a beep when the
1/250
AF frame subject comes into focus.
Subsequent steps are the same as shooting with the viewfinder.
Disabling Operation Controls
Operation of buttons and dials can be temporarily disabled to prevent misoperation during shooting.
Turning R while pressing 7 disables the operation of buttons and dials. Turning R again enables the operation of them.
e is displayed on the status screen as well as in the viewfinder and Live View while the operation of buttons and dials is disabled.
The group of buttons and dials to be disabled can be selected in
[Operation Control Lock] of [Fx
Button] in the E
SR
250
1600
FF
9999
9999
How to Use a Retractable Lens
3
If the camera is turned on when a retractable lens, such as HD
PENTAX-DA 18-50mm F4-5.6 DC
WR RE, is attached and is not
2 extended, an error message is displayed on the monitor. Turn the
1 zoom ring in the direction of 2 while pressing the button on the ring ( 1 ) to extend the lens.
When retracting the lens, turn the zoom ring in the opposite direction to 2 while pressing the button on the ring and align the white dot to the position 3 .
46
Reviewing Images
You can review the captured image on the monitor.
1
Press 3 .
The camera enters the playback mode and the most recently captured image is displayed
(single image display).
2
Review the captured image.
Available operations
CD / Q / Flick Displays the previous or next image.
L Deletes the image.
R to the right /
Pinch out /
Double-tap
E
Magnifies the image (up to 16×).
Use 6 to change the area to display.
Push the lever in to return the display area to the center of the image.
Magnifies the image with the magnification set in [Quick Zoom] of [Zoom Review] in the E 4
In magnified view: Returns to the entire image display.
R to the left /
Pinch in
M
O
G
Switches to the thumbnail display
Switches between the SD1 card and the SD2 card.
Saves the RAW data (only when a JPEG image was taken and the data remains in the buffer).
Changes the type of information
Displays the playback function
H /
Tap and hold t Memo
• When R is turned to the right to magnify the image, the magnification is displayed at the bottom right of the screen.
“100%” appears when the image is displayed at the actual pixel size (1× image display). You can set the display magnification and trigger operation when magnifying images in [Quick Zoom] of [Zoom Review] in the E
• When O is displayed on the monitor, the JPEG image that was just taken can also be saved in RAW format (Save RAW
Data).
• You can change the information to display in the single image display in [Playback Info Display] of [Monitor Display] in the
E
• While the power is on, the last played image is stored. If you want to store the last played image even when the camera is turned off, set [Image for Playback] to Z (On) in [Memory] of the E
2
47
3
Configuring the Capture Settings
Memory Card Recording
Settings
A 5 / B 5
You can set the recording method for when two memory cards are inserted in [Memory Card Options] of the A 5 menu.
Memory Card Options
Memory Card Options
Card Slot Sequence
Sequential Use When the memory card in one slot becomes full, saves data to the card in the other slot.
The slot to use can be switched with [Card
Slot Sequence].
Save to Both Saves the same data to the memory cards in both the SD1 and the SD2 slots.
Separate RAW/
JPEG
Saves the RAW data to the memory card in the SD1 slot, and the JPEG data to the card in the SD2 slot.
In B mode, select [SD1] or [SD2] as the slot to use for saving movies.
Still Image Capture Settings
You can set the file format for still images in the A 5 menu.
A 5
Image Capture Settings
Memory Card Options
File Format
Crop
JPEG Recorded Pixels
JPEG Quality
RAW File Format
Color Space
Off
PEF
File Format
Crop
JPEG, RAW, RAW+JPEG
1.3x, Off
JPEG Recorded Pixels q , p , o , r
JPEG Quality Super Fine, Fine, Economy
RAW File Format
Color Space
PEF, DNG sRGB, AdobeRGB u Caution
• When [Memory Card Options] is set to [Separate RAW/
JPEG] in the A 5 menu, [File Format] is fixed to
[RAW+JPEG].
• When [Crop] is set to [1.3x], q cannot be selected for [JPEG
Recorded Pixels].
t Memo
• When [File Format] is set to [RAW+JPEG], a JPEG image and a RAW image with the same file number are saved at the same time.
• You can change the setting so that you can take images in another file format when O is pressed (One Push File
• [PEF] of [RAW File Format] is a PENTAX original RAW file format.
• When [Crop] is set to [1.3x], the cropping frame is displayed
in the viewfinder. (p.16) Perform shooting so that the subject
is positioned in the frame.
48
Movie Capture Settings
You can set the file format for movies in [Movie Capture Settings] of the
B 5 menu.
Movie Capture Settings
Memory Card Options
Recorded Pixels
Framerate
Recording Sound Level
Wind Noise Reduction
Headphone Volume
Custom Image
B 5
Recorded Pixels
Framerate
Recording Sound
Level z , x
60p, 30p, 24p
Auto, Manual (0 to 40)
Wind Noise Reduction On, Off
Headphone Volume 0 to 40 u Caution
• When [Recorded Pixels] is set to z , [60p] cannot be selected for [Framerate].
t Memo
• Setting [Wind Noise Reduction] to [On] cuts off the low-pitch sound. It is recommended to set [Wind Noise Reduction] to
[Off] when it is not necessary.
Taking Still Images
Select the capture mode that suits the subject and shooting conditions.
The following capture modes are available on this camera.
Function Page Capture Mode
R
(Scene Analyze Auto mode)
Automatically sets the optimal shooting settings.
G
L
,
,
O
H
M
to
,
, I
N
5
,
(User modes)
J ,
(Exposure modes)
K ,
Allows you to change the shutter speed, aperture value, and ISO sensitivity.
Allows you to save frequently used exposure modes and capture settings together.
3
49
3
Exposure Modes
Mode x : Available #: Restricted
×
: Not available
Changing
Shutter
Speed
Changing
Aperture
Value
Changing
ISO
Sensitivity
EV Compensation
G
Program AE
H
Sensitivity
Priority AE
I
Shutter
Priority AE
J
Aperture
Priority AE
K
Shutter &
Aperture
Priority AE
L
Manual
Exposure
M
Bulb
Exposure
N
Flash X-sync
Speed
#
# x
# x x
x x x x x
x x x x
x x x
x x x x x x
× x
*1 You can set the value to be changed in [E-Dial Programming] of the
E
*2 ISO Auto is not available.
*3 You can change the shutter speed in the range of 1 second to 20
minutes for the timed exposure. (p.53)
*4 You can change the flash sync speed in [X Mode Sync Speed] of the
E 5 menu.
50
1
Set the mode dial to the desired exposure mode.
Q , R , or V appears next to the value on the status screen
250
1600
FF and Live View in the following situations.
• When a fixed value is set and it can be changed with Q , R , or V
SR
01/01/2021
10:10
9999
9999
• When the camera is in the mode to change values after operations such as pressing a function button
D appears next to the value that can be changed on the outsidefield-of-view information in the viewfinder and on the LCD panel.
1/250
9999
9999
2
Turn R or Q .
When [E-Dial], [ISO Sensitivity], or [EV Compensation] is set for the Smart Function, turn V .
t Memo
• The exposure value can be specified in increments of 1/3 EV steps. In [EV Steps] of the E 5 menu, you can change the adjustment steps to 1/2 EV steps.
• In L or N mode, the difference from the correct exposure is displayed on the EV bar scale while the exposure is adjusted.
• For each exposure mode, you can set the camera operation for when Q or R is turned or M is pressed. Make settings in [E-Dial Programming] of the E
• To compensate the exposure automatically by pressing
0 halfway when the correct exposure cannot be achieved, set [Auto EV Compensation] to [On] in the A 2 menu. When you release 0 , the exposure returns to the original value.
• While shooting with Live View in L , N , or M (with the timed exposure set) mode, the brightness of Live View changes according to the exposure setting. To not adjust the brightness according to the exposure setting, set [Exp.
Simulation LV] to [Off] in the D 2 menu.
u Caution
• The correct exposure may not be obtained with the selected shutter speed and aperture value when the ISO sensitivity is fixed at a certain sensitivity. (If the ISO sensitivity is set to ISO
Auto, the correct exposure may be obtained.)
• In M mode, [Drive Mode] cannot be set to [Continuous
Shooting], [Bracketing], [Interval Shooting], or [Interval
Composite] in the A 4 menu. (When the timed exposure is set, you can select [Interval Shooting] and [Interval
Composite].)
Autofocusing Using the Touch Panel
While shooting with Live View, you can change the AF point using the touch panel. To perform autofocus and shooting using the touch panel, make settings in [LV Shooting Touch
AF] of the E 3 menu.
AF Point
AF
Point+Focus
AF
Point+Focus+
Shoot
Sets the AF point to the touched point.
(Default setting)
Sets the AF point to the touched point and performs autofocus.
Sets the AF point to the touched point, and performs autofocus and shooting.
Off
Does not use the touch panel for shooting.
3
51
Reducing Noise when Shooting with a
Slow Shutter Speed
When shooting with a slow shutter speed, you can reduce image noise in [Slow Shutter Speed NR] of [Noise
Reduction] in the A 6 menu.
Slow Shutter Speed NR
Auto
On
Off
A 6
3
Auto
On
Off
Applies noise reduction according to the ISO sensitivity, shutter speed, and internal temperature of the camera.
Applies noise reduction when the shutter speed is slower than 1 second.
Does not apply noise reduction at any shutter speed.
Setting the Exposure Control Method
In [Program Line] of the A 2 menu, you can specify how exposure is controlled in G , H , K , and L modes.
Program Line
Auto
Standard
Hi-speed Priority
DOF Priority (Deep)
DOF Priority (Shallow)
MTF Priority
A 2
52
Auto
Standard
Sets to the basic program automatic exposure (all-around mode).
Hi-speed Priority Prioritizes high shutter speeds.
DOF Priority
(Deep)
DOF Priority
(Shallow)
MTF Priority
Determines the appropriate settings.
Closes the aperture for a deep depth of field.
Opens the aperture for a shallow depth of field.
Sets the sharpest aperture of the attached lens when a D FA, DA, DA L,
FA, or FA J lens is used.
Hyper Program
You can shift the shutter speed and aperture value while keeping the correct exposure by changing the shutter speed or aperture value in G mode. This feature is called “hyper program”. When the camera enters the hyper program mode, the exposure mode is temporarily displayed as I or
J mode. Either the shutter speed or the aperture value can be changed in the hyper program mode.
Press M to return to the normal G mode.
Hyper Manual
In L mode where the ISO sensitivity, shutter speed, and aperture value can be set freely, the automatic exposure control is temporarily performed only while M is pressed.
The exposure mode to change when M is pressed can be set in [E-Dial Programming] of the E
Advanced Mode
When [HYPER P/Sv Options] of [E-Dial Programming] is set to [Advanced] in the E 2 menu, you can use the “advanced mode” in G or H
mode. (p.105) To use the hyper mode in
other exposure modes, assign the hyper mode function to dials in [E-Dial Programming] of the E
If you change the ISO sensitivity, shutter speed, and aperture value, the camera enters the hyper mode for each item in the order in which the value is changed. When all the
ISO sensitivity, shutter speed, and aperture value are changed, the camera enters the hyper L mode. Press M to return to the exposure mode set with the mode dial.
Exposure
Mode
ISO
Sensitivity
Operation
1
Aperture value
Shutter speed
G
AUTO
Fixed value
Aperture value
H
Fixed value
Shutter speed
Aperture value
Shutter speed
I
J
K
AUTO
Fixed value
AUTO
Fixed value
AUTO
Aperture value
Aperture value
Shutter speed
Shutter speed
ISO sensitivity
Hyper
Mode
J
I
J
I
J
I
K
L
K
L
L
Operation
2
Shutter speed
Aperture value
Shutter speed
Aperture value
Shutter speed
Aperture value
ISO sensitivity
ISO sensitivity
Hyper
Mode
K
K
L
L
L
L
L
L
Operation
3
ISO sensitivity
ISO sensitivity
Hyper
Mode
L
L
Example) In G mode with ISO Auto
• G (Change the aperture value) Hyper J mode
(Change the shutter speed) Hyper K mode
(Change the ISO sensitivity) Hyper L mode
Bulb Exposure
1
Set the mode dial to M .
2
Use R to set the aperture value.
Bulb
1600
FF
SR
9999
9999
3
To enable the timed exposure, press M , and then turn Q to set the exposure time.
You can set the exposure time within the range from 1" to
20'00".
4
Press 0 .
While 0 is pressed, the exposure continues.
If the timed exposure is enabled in Step 3, the exposure ends when the set exposure time elapses after 0 is fully pressed.
t Memo
• You can start and end the exposure also by pressing 0 .
Make settings in [Bulb (B) Mode Options] of the E 5 menu.
Bulb
Time
While 0 is pressed, the exposure continues. (Default setting)
The exposure starts when 0 is pressed and ends when 0 is pressed again.
• During the bulb exposure, [Shake Reduction] is fixed to [Off] in the A 7 menu.
• When performing the bulb exposure, use a tripod and mount the camera on it securely. The use of the optional cable release is recommended.
u Caution
• In M mode, [Drive Mode] cannot be set to [Continuous
Shooting] or [Bracketing] in the A 4 menu.
• When the timed exposure is not set, [Drive Mode] cannot be set to [Interval Shooting] or [Interval Composite] in the A 4 menu.
53
3
EV Compensation
The compensation value can be set between -5 and +5 EV (-2 and +2 EV in B mode).
1
Press J , and then turn
R .
Recording Movies
1
Set the A / K / B dial to
B .
3
Live View appears.
Sound
Available operations
J
M
Starts/ends adjusting the compensation value.
Resets the compensation value to the default setting.
t Memo
• You can make settings so that pressing J resets the compensation value when the exposure compensation function is assigned to Q , R , or V . Make settings in [One
Push Exposure Reset] of the E 2 menu.
4.0GB
0′00″
Recording time
2
Use the mode dial to select an exposure mode.
G , I , J , K , or L mode can be selected.
3
Use Q or R to set the exposure.
4
Focus on the subject.
When the focus method is set to v , press 0 halfway.
5
Press 0 fully.
Movie recording starts.
6
Press 0 fully again.
Movie recording stops.
54
u Caution
• When recording a movie with sound, camera operation sounds are also recorded.
• When recording a movie with an image processing function such as [Digital Filter] of the B 6 menu applied, the movie file may be saved with some frames omitted.
• If the internal temperature of the camera becomes high during recording, recording may be terminated.
• When a retractable lens is attached, recording stops if the lens is retracted during recording and an error message is displayed.
t Memo
• When the mode dial is set to other than the modes described in Step 2, the camera operates in G mode.
• You can set the autofocus operation during movie shooting in
[Movie Mode AF] of [AF with Live View] in the B 1 menu.
• When a compatible lens is attached to the camera, [AF Mode] can be set to [Continuous AF] in [AF with Live View] of the
B 1 menu. When [Continuous AF] is set, autofocus is always performed even while recording a movie.
• To disable the autofocus operation with 0 pressed halfway in B mode, set [Movie] to [Off] in [AF/AE Lock
Settings] of the E 2 menu.
• You can record a movie continuously up to 4 GB or 25 minutes. When the memory card is full, recording stops.
Movie Recording Using the Touch Panel
When recording a movie, you can start and stop recording and change the following settings using the touch panel.
• ISO sensitivity, shutter speed, aperture value, and exposure compensation value
• AF point
• Screen display on/off
To perform autofocus while recording a movie, make settings in [Movie Touch AF] of the E 3 menu.
AF Point
AF Point+
Continuous AF
AF Point+Sgl.
AF at Start
Off
Sets the AF point to the touched point.
(Default setting)
Sets the AF point to the touched point and continues autofocus when a compatible lens is attached to the camera.
Sets the AF point to the touched point and performs autofocus once.
Does not use the touch panel for recording movies.
3
55
3
Using a Microphone or
Headphones
You can reduce the possibility of recording camera operation sounds by connecting a commercially available stereo microphone to the microphone terminal on the camera.
The following specifications are recommended for external microphones. (A monaural microphone cannot be used with this camera.)
Microphone terminal
Headphone terminal
Plug
Format
Power
Stereo mini plug (3.5 mm dia.)
Stereo electret condenser
Plug-in Power Method (operating voltage of 2.0 V or lower)
2.2 kΩ Impedance
You can record and play back movies while listening to the sound by connecting commercially available headphones to the headphone terminal.
u Caution
• Do not connect a microphone or other device outside the recommended specifications to the microphone terminal or headphone terminal. Also, do not use an external microphone with a 3-m or longer cable. Doing so may cause the camera to malfunction.
• If an external microphone is used when recording a movie with the wireless LAN function enabled, radio noise may be recorded depending on the compatibility with the microphone.
Playing Back Movies
1
Display the movie to play back in the single image display of the playback mode.
Available operations
A / Tap
C D
B / Double-tap
R
H
G
Plays back/Pauses a movie.
Fast-reverses/Fast-forwards playback.
Reverses/Forwards a frame
(when paused).
Stops playback.
Adjusts the sound volume (41 levels).
Saves the displayed frame as a
JPEG file (when paused).
Switches between [Standard
Info. Display] and [No
Information Display].
t Memo
• The sound volume at the start of movie playback can be set in [Playback Sound Volume] of the C
• You can divide a movie file into multiple segments or delete selected frames in the C
56
Setting the Exposure
ISO Sensitivity
1
Press N , and then turn
R .
Available operations
N Starts/ends changing the ISO sensitivity.
M Resets the ISO sensitivity to ISO Auto.
t Memo
• In B mode, the ISO sensitivity can be set from ISO 100 to
ISO 25600.
• The adjustment steps for the ISO sensitivity is 1 EV step. To adjust the ISO sensitivity in accordance with the EV step setting for the exposure, make settings in [ISO Sensitivity
Steps] of the E 5 menu.
• You can make settings so that pressing N resets the ISO sensitivity to ISO Auto without displaying the setting screen when the ISO sensitivity setting function is assigned to Q ,
R , or V . Make settings in [One Push ISO Auto] of the E 2 menu.
Setting the Range of ISO Auto
You can set the range in which the
ISO sensitivity is automatically adjusted when the ISO sensitivity is set to ISO Auto. Make settings in [ISO
Sensitivity Setting] of the A 2 menu.
ISO Sensitivity Setting
ISO Auto Upper Limit
ISO Auto Lower Limit
Min. Shutter Speed Op.
ISO Auto with Min. Speed
Minimum Shutter Speed
A 2
3200
100
1/125
ISO Auto Upper
Limit
ISO Auto Lower
Limit
Min. Shutter
Speed Op.
ISO Auto with
Min. Speed
Minimum
Shutter Speed
Sets the ISO sensitivity upper limit for ISO
Auto.
Sets the ISO sensitivity lower limit for ISO
Auto.
Sets whether to automatically determine the lower limit according to the focal length information of the lens or to manually set the limit.
Sets the manner in which the ISO sensitivity is increased when [Min. Shutter
Speed Op.] is set to [Auto].
Sets the shutter speed in units of 1 EV when [Min. Shutter Speed Op.] is set to
[Shutter Speed Control].
3
57
3
Reducing Noise when Shooting with a
High ISO Sensitivity
A 6
You can use the noise reduction feature when shooting with a high ISO sensitivity.
1
Select [Noise Reduction] in the A 6 menu and press D .
The [Noise Reduction] screen appears.
2
Select [High-ISO Noise Reduction] and press D .
3
Select the noise reduction level and press E .
High-ISO Noise Reduction
Auto
Low
Medium
High
Custom
Off
5
Select the noise reduction level for each ISO sensitivity setting.
High-ISO Noise Reduction
ISO 100
ISO 200
-
-
ISO 400
ISO 800
-
-
ISO 1600
ISO 3200
-
-
Available operations
AB Selects the ISO sensitivity.
CD
M
Selects the noise reduction level.
Resets the noise reduction level to the default setting.
6
Press E .
The screen of Step 3 reappears.
7
Press F twice.
Auto
Applies noise reduction at optimally calculated levels throughout ISO sensitivity range.
Low,
Medium,
High
Applies noise reduction at constant chosen level throughout ISO sensitivity range.
Custom
Off
Applies noise reduction at user-defined levels for each ISO sensitivity setting.
Does not apply noise reduction at any ISO sensitivity setting.
Proceed to Step 7 when other than [Custom] is selected.
4
Select [Custom Options] and press D .
58
AE Metering
A 2 / B 2
You can choose the part of the sensor to use for measuring brightness and determining the exposure.
1
Press 2 , and then turn
R .
Alternatively, select [AE
Metering] in the A 2 or B 2 menu.
Setting the Focus Method
Set the focus method switch to v or w .
250
1600
FF 5.6
SR
9999
9999
Multisegment
Centerweighted
Spot
Highlightweighted
Meters the brightness in multiple different zones of the sensor.
In backlit conditions, this mode automatically adjusts the exposure.
Meters the brightness with an emphasis on the center of the sensor.
The sensitivity increases at the center and no automatic adjustment is performed even in backlit conditions.
Meters the brightness only within a limited area at the center of the sensor.
Meters the exposure in multiple areas of the frame with emphasis on the bright areas.
t Memo
• To adjust the exposure for detected faces when [Multi-segment] is selected, set [Face Priority AE] to [On] in the A 2 menu.
• To adjust the exposure according to the brightness at the AF point when [Multi-segment] or [Spot] is selected, set [Link AE and AF Point] to [On] in the A 2 menu.
The autofocus method for shooting with the viewfinder differs from that for shooting with Live View.
Shooting with the viewfinder
Phase-matching detection autofocus:
[Single AF] or [Continuous AF] can be selected.
Faster autofocus performance than the contrast detection autofocus is possible.
Shooting with Live
View
Contrast detection autofocus
Focusing on the Subject Using I
You can use I to perform autofocus.
The 0 / I operation can be set in [AF/AE Lock Settings] of the
E
59
3
3
Setting the Autofocus when Shooting with the Viewfinder
A 1
You can set the autofocus operation when shooting with the viewfinder in
[AF with Viewfinder] of the A 1 menu.
AF with Viewfinder
AF Mode
AF Active Area
AF Area Restriction
AF.S Setting
1st Frame Action in AF.C
Action in AF.C Cont.
Off t Memo
• The [AF Mode] and [AF Active Area] setting can be changed by pressing b and then turning Q or R
AF Mode
1
Press b , and then turn
Q .
250
1600
FF
SR
9999
9999
Single AF
Continuous
AF
When 0 is pressed halfway and the subject comes into focus, the focus is locked at that position.
The AF assist light turns on as necessary.
The subject is kept in focus by continuous adjustment while 0 is pressed halfway.
The shutter can be released even if the subject is not in focus.
AF Active Area (AF Point)
You can select the AF points.
The AF points can be selected from 41 points out of 101 points.
1
Press b , and then turn
R .
250
1600
FF
SR
9999
9999
Auto Area
Zone Select
Select
Expanded
Area AF (S)
Expanded
Area AF (M)
Automatically selects the optimum focusing points out of all AF points.
Automatically selects the optimum focusing points out of the selected
21 AF points.
Sets the AF points to the user selected five points.
Sets the AF points to the user selected five points.
When the subject happens to move out of the selected AF points after being focused, 16 peripheral points are used as back-up points for autofocus.
This setting is available only with
[Continuous AF].
Sets the AF points to the user selected five points.
When the subject happens to move out of the selected AF points after being focused, 60 peripheral points are used as back-up points for autofocus.
This setting is available only with
[Continuous AF].
60
Expanded
Area AF (L)
Select (S)
Sets the AF points to the user selected five points.
When the subject happens to move out of the selected AF points after being focused, 96 peripheral points are used as back-up points for autofocus.
This setting is available only with
[Continuous AF].
Performs autofocus with fewer AF points than those for [Select].
Sets the AF point to the center point.
Spot
Proceed to Step 2 when other than [Auto Area] or [Spot] is selected.
2
Use 6 to select the desired AF points.
Push the lever in to reset the AF points.
The selected AF points are displayed on the status screen.
250
1600
FF
SR
9999
9999 t Memo
• The selected AF points can be checked also in the viewfinder.
u Caution
• The selectable AF points differ depending on the lens
AF Area Restriction
You can limit the range of AF points.
When [AF Area Restriction] is set to [On], only the inner AF frame is used.
AF.S Setting
You can select the camera operation priority for when the
0 is pressed fully while the autofocus mode is set to
[Single AF] from [Focus-priority] and [Release-priority].
1st Frame Action in AF.C
You can select the camera operation priority for the first frame when the 0 is pressed fully while the autofocus mode is set to [Continuous AF] from [Auto], [Focus-priority], and
[Release-priority].
Action in AF.C Cont.
You can select the camera operation priority for continuous shooting when the autofocus mode is set to [Continuous AF] from [Auto], [Focus-priority], and [FPS-priority].
Hold AF Status
You can set whether to immediately reactivate autofocus or to maintain the focus for a certain amount of time before reactivating autofocus when the subject happens to move out of the selected focusing points while tracking the subject with
[Continuous AF]. The setting can be selected from [Off], [Low],
[Medium], and [High].
3
Action When AF Fails
You can select whether to adjust focus manually with the lens or to wait until the camera can perform autofocus when autofocus fails.
61
AF Point Tracking in AF.C
You can set the method for tracking AF points when the autofocus mode is set to [Continuous AF].
Type 1
Tracks AF points using AF sensor and AE sensor information.
Type 2 Tracks AF points using AF sensor information only.
3
Subject Recognition
You can make settings so that the recognized subject is prioritized while autofocusing when [AF Active Area] is set to
[Auto Area] or [Zone Select].
Catch-in Focus
You can perform Catch-in Focus shooting. The shutter is released automatically when the subject comes into focus.
Use a manual focus lens or a lens with the v / w switch set to w .
1
Attach a manual focus lens to the camera.
2
Set the focus method to v .
3
Set [Catch-in Focus] to [On] in [AF with
Viewfinder] of the A 1 menu.
4
Place the camera on a fixed support such as tripods.
5
Adjust the focus to the position where the subject may pass and press 0 fully.
When the subject comes into focus at the specified position, the shutter is released automatically.
Setting the Autofocus when
Shooting with Live View
A 1 / B 1
You can set the autofocus operation when shooting with Live
View in [AF with Live View] of the A 1 or B 1 menu.
A 1 Menu B 1 Menu
AF with Live View
AF Active Area
Focus Peaking
Contrast AF Options
Face Detection
AF with Live View
AF Active Area
Movie Mode AF
Focus Peaking t Memo
• The [AF Active Area] setting can be changed by pressing b and then turning R
62
AF Active Area
You can select the AF active areas.
1
Press b , and then turn
R .
Auto Area
Zone Select
Automatically selects the optimum focusing area out of all AF active areas.
Performs autofocus in the selected
3×3 areas.
Tracks the subject in focus.
Select (L)
Select (M)
Select (S)
Spot
Performs autofocus with more areas than those for [Select (M)].
Performs autofocus with the selected areas.
Performs autofocus with fewer areas than those for [Select (M)].
Sets the AF active area to the center area.
*1 Not available in B mode.
Proceed to Step 2 when other than [Auto Area] or [Spot] is selected.
2
Use 6 to select the AF active areas.
Push the lever in to reset the AF active areas.
1/250 1600
9999
9999
3
63
Movie Mode AF
You can set the autofocus operation in B mode. Select whether to lock focus or continue autofocus.
When [Continuous AF] is selected, autofocus is performed automatically without pressing 0 halfway. The continuous autofocus function is available only when a compatible lens is attached.
3
64
Focus Peaking
When [Highlight Edge] or [Extract Edge] is selected, the outline and contrast of the subject in focus are emphasized, and this makes it easier to check the focus. This function works in both v and w focus methods.
u Caution
• While autofocusing and recording a movie, focus peaking is not displayed.
• While focus peaking is displayed, the histogram and highlight alert are not displayed.
Contrast AF Options
You can select the camera operation priority for when the
0 is pressed fully from [Focus-priority] and [Releasepriority].
Face Detection
You can make settings so that the camera detects the faces of up to ten people and performs autofocus for the detected faces.
On
Only in Auto Area
Off
Detects faces when [AF Active Area] is set to other than [Tracking].
Detects faces only when [AF Active Area] is set to [Auto Area].
Follows the [Face Detection] setting without detecting faces.
Fine-tuning the Autofocus
E 7
You can precisely fine-tune your lenses with the camera’s autofocus system.
1
Select [AF Fine Adjustment] in the E 7 menu and press D .
The [AF Fine Adjustment] screen appears.
2
Press D .
The adjustment method selection screen appears.
3
Select the adjustment method and press E .
Common
Individual
Applies the same adjustment value to all lenses.
Saves an adjustment value for the lens being used. (Up to 20 values can be saved.)
Does not fine-tune the autofocus.
Off
4
Press B and adjust the value.
AF Fine Adjustment
AF Fine Adjustment
+5
Available operations
D
C
Adjusts the focus to a closer position (toward the front).
Adjusts the focus to a farther position
(toward the rear).
M When [Individual] is selected: Resets the adjustment value to the default setting.
5
Press F twice.
The camera returns to the standby mode.
Checking the Depth of Field (Preview)
Turn the main switch to U to use the preview function.
There are two preview methods.
Optical Preview
Digital Preview
Activates the Optical Preview function to check the depth of field with the viewfinder.
Activates the Digital Preview function to check the composition, exposure, and focus on the monitor.
You can magnify or save the preview image.
t Memo
• Press F during Digital Preview to end the preview.
Setting the Preview Method E 2
1
Select [Preview Dial] in the E 2 menu and press
D .
The [Preview Dial] screen appears.
2
Select [Preview Method] and press D .
Preview Dial
Preview Method
Digital Preview Settings
3
Select [Optical Preview] or [Digital Preview], and press E .
When [Digital Preview] is selected, the operations and information displayed during the preview can be set in [Digital
Preview Settings].
Digital Preview Settings
Zoom Review
Save Preview Image
Histogram
Highlight Alert
4
Press F two or three times.
The camera returns to the standby mode.
u Caution
• The effects of some functions cannot be checked during
Digital Preview or are not applied to the saved preview image.
3
65
3
Selecting the Drive Mode
A 4
You can use the [Drive] and [Timer/Remote Control] functions in combination.
1
Press A in the standby mode.
Alternatively, select [Drive Mode] in the A 4 menu.
The [Drive Mode] screen appears.
2
Press D .
The [Drive] screen appears.
Refer to p.73 for [Timer/Remote Control].
3
Use AB to select a drive mode.
Motion
Bracketing
Mirror Lock-up
Shooting
Multi-exposure
Interval
Shooting
Interval
Composite
Continuously takes images with
different shutter speeds. (p.69)
Takes images with the mirror raised. The mirror is raised when
0 is pressed fully, and an image is taken when 0 is
Creates a composite image by taking multiple images and merging them into a single
Takes images at the set interval
Takes images at the set interval and merges them into a single
u Caution
• There are restrictions on some drive modes when used in
combination with some other functions. (p.115)
t Memo
• The [Drive] setting is saved even after the power is turned off.
If [Drive] is set to Y (Off) in [Memory] of the E 5 menu, the setting returns to [Single Frame Shooting] when the power is
Single Frame
Shooting
Continuous
Shooting (H)
Continuous
Shooting (M)
Continuous
Shooting (L)
Bracketing
Performs normal shooting.
Continuously takes images while
0
Depth of Field
Bracketing
Takes consecutive images at
different exposure levels. (p.67)
Continuously takes images with different depth-of-field settings
66
Continuous Shooting
1
Select [Continuous
Shooting (H)], [Continuous
Shooting (M)], or
[Continuous Shooting (L)] on the [Drive] screen.
Bracketing
1
Select [Bracketing] on the [Drive] screen.
2
Set the number of shots and bracket value.
Performs continuous shooting at high speed.
Performs continuous shooting at medium speed.
Performs continuous shooting at low speed.
2
Press E .
The camera returns to the standby mode.
t Memo
• When [AF Mode] is set to [Single AF] in [AF with Viewfinder] of the A 1 menu, the autofocus position is locked at the focus position of the first image.
• When using the [Self-timer] function together, press G on the screen of Step 1 and set the number of shots in [No. of
Cont. Timer Shots] (2 to 20).
Available operations
Q
Sets the number of shots.
R
Changes the bracket value.
J R Adjusts the exposure compensation value.
M Resets the compensation value to the default setting.
3
Press G .
4
Set the shooting conditions.
Bracketing
Bracketing Order
One-Push Bracketing
0 − +
On
3
Bracketing Order
One-Push
Bracketing
Changes the shooting order of images.
Takes all images with one release of the shutter.
5
Press E .
The camera returns to the standby mode.
6
Shoot.
After images are taken, the camera returns to the standby mode.
67
3 t Memo
• The bracket value can be set in increments of [1/3 EV Steps] or [1/2 EV Steps] according to the setting of [EV Steps] in the
E 5 menu.
• The number of shots and bracket value can also be changed on the [Drive Mode] screen.
Depth of Field Bracketing
You can take three images continuously by changing the aperture value step by step without changing the exposure.
This drive mode can be selected only in J or K mode.
1
Select [Depth of Field Bracketing] on the [Drive] screen.
2
Set the bracket value.
Available operations
R Changes the bracket value.
M Resets the bracket value to the default setting.
Larger bracket value
Takes an image with a deep depth of field based on the current aperture value.
Smaller bracket Takes an image with a shallow depth of value field based on the current aperture value.
3
Press E .
The camera returns to the standby mode.
4
Shoot.
Three images are taken with one release of the shutter.
The camera returns to the standby mode.
t Memo
• The bracket value can be set in increments of [1/3 EV Steps] or [1/2 EV Steps] according to the setting of [EV Steps] in the
E 5 menu.
u Caution
• [Depth of Field Bracketing] cannot be selected when a lens with an 9 position is used with the aperture ring set to a position other than 9 .
68
Motion Bracketing
You can take three images continuously by changing the shutter speed step by step without changing the exposure.
This drive mode can be selected only in I or K mode.
1
Select [Motion Bracketing] on the [Drive] screen.
2
Set the bracket value.
Mirror Lock-up Shooting
1
Select [Mirror Lock-up
Shooting] on the [Drive] screen.
Available operations
R Changes the bracket value.
M Resets the bracket value to the default setting.
Larger bracket value
Takes an image in which the subject appears to be stationary based on the current shutter speed.
Smaller bracket value
Takes an image in which the subject appears to be moving based on the current shutter speed.
3
Press E .
The camera returns to the standby mode.
4
Shoot.
Three images are taken with one release of the shutter.
The camera returns to the standby mode.
t Memo
• The bracket value can be set in increments of [1/3 EV Steps] or [1/2 EV Steps] according to the setting of [EV Steps] in the
E 5 menu.
2
Press E .
The camera returns to the standby mode.
3
Press 0 halfway, and then fully.
The mirror pops up and the AE Lock function is activated.
4
Press 0 fully again.
The mirror returns to its original position after the image is taken.
t Memo
• A beep sound is made during mirror lock-up shooting. You can also make settings so that a beep sound is not made.
• During mirror lock-up shooting, [Shake Reduction] is fixed to
[Off] in the A 7 menu.
• The outside-field-of-view information is not displayed in the viewfinder during mirror lock-up shooting.
• The mirror automatically returns to its original position if 1 minute elapses after the mirror pops up.
3
69
Multi-exposure
1
Select [Multi-exposure] on the [Drive] screen and press G .
3 2
Set the shooting conditions.
Multi-exposure
Composite Mode
Save Interim Images
Continuous Shooting
No. of Cont. Timer Shots
Average
20
5
Press 0 .
The Instant Review image is displayed.
6
To take the next image, select [Next shot], and then press E .
Select [Retake shot] to retake the image.
Select [Complete] to end shooting.
u Caution
• [Continuous Shooting] is not available in M mode.
70
Composite
Mode
[Average]: Creates a composite image with the average exposure.
[Additive]: Creates a composite image with the cumulatively added exposure.
[Bright]: Compares the captured image with the previous image pixel by pixel, and creates a composite image by replacing only the brightest pixel between the images.
Sets whether to save images in the middle of processing.
Save Interim
Images
Continuous
Shooting
Sets whether to perform continuous shooting.
No. of Cont.
Timer Shots
Sets the number of images taken continuously after the countdown for shooting with [Self-timer].
The number of images can be selected from 2 to 20.
3
Press F .
The screen of Step 1 reappears.
4
Press E .
The camera returns to the standby mode.
2
Interval Shooting
1
Select [Interval Shooting] on the [Drive] screen and press G .
Set the shooting conditions.
Interval Shooting
Interval
Number of Shots
Start Interval
Start Time
Fixed Time Release
AF Operation per Shot
00:00´01˝
Now
2
00:00
Off
On
Interval
Start Time
Sets the shooting interval. The interval can be selected from [Minimum] and 1 second to 24 hours.
Number of
Shots
Sets the number of images to take. The number can be selected from [∞] and 2 to
9999.
Start Interval Sets the timing to take the first image.
Sets the shooting start time for when
[Start Interval] is set to [Set Time].
Fixed Time
Release
AF Operation per Shot
Sets whether to take images at the interval set in [Interval] regardless of the shutter speed.
Sets whether to lock the focus position used when the first image is taken or perform autofocus each time an image is taken.
3
Press F .
The screen of Step 1 reappears.
4
Press E .
The camera returns to the standby mode.
5
Press 0 .
When [Start Interval] is set to [Now], the first image is taken.
When [Start Interval] is set to [Set Time], shooting starts at the set time.
Press E to cancel shooting.
After the specified number of images are taken, the camera returns to the standby mode.
t Memo
• For each interval shooting, a new folder is created and the images are saved there.
• The second and later exposures start at the interval set in
[Interval]. When the shutter speed is longer than the interval set in [Interval], the shooting result varies depending on the
[Fixed Time Release] setting.
Fixed Time
On
Off
Release
When the Shutter Speed Is Longer than the
Interval Set in [Interval]
Some shutter releases are skipped.
Example) When [Interval] is set to 2 seconds, and the shutter speed is set to 3 seconds:
The first exposure has not yet finished at the time the second exposure is supposed to be started (2 seconds after shooting has started), and so the second image is not taken. (Shooting ends before the images specified in [Number of Shots] are taken.)
No shutter releases are skipped.
Example) When [Interval] is set to 2 seconds, and the shutter speed is set to 3 seconds:
The second exposure does not start even 2 seconds after shooting has started, and starts after the first exposure finishes.
(Shooting ends after the images specified in
[Number of Shots] are taken.)
• When [Fixed Time Release] is set to [On], [Minimum] is not available for [Interval]. If [Interval] is set to [Minimum], the setting changes to [1sec.].
• The time set by [Minimum] in [Interval] varies depending on the combination with the A menu functions.
71
3
3
1
Select [Interval Composite] on the [Drive] screen and press G .
2
Interval Composite
Set the shooting conditions.
Interval Composite
Interval
Number of Shots
Start Interval
Start Time
Composite Mode
Save Interim Images
00:00´01˝
2
Now
00:00
Average
72
Interval
Number of
Shots
Sets the shooting interval. The interval can be selected from [Minimum] and 1 second to 24 hours.
Sets the number of images to take. The number can be selected from [∞] and 2 to 9999.
Start Interval Sets the timing to take the first image.
Start Time
Sets the shooting start time for when [Start
Interval] is set to [Set Time].
Composite
Mode
Save Interim
Images
Sets the composite mode. The mode can be selected from [Average], [Additive], and [Bright].
Sets whether to save images in the middle of processing.
Fixed Time
Release
Sets whether to take images at the interval set in [Interval] regardless of the shutter speed.
AF Operation per Shot
Sets whether to lock the focus position used when the first image is taken or perform autofocus each time an image is taken.
3
Press F .
The screen of Step 1 reappears.
4
Press E .
The camera returns to the standby mode.
5
Press 0 .
When [Start Interval] is set to [Now], the first image is taken.
When [Start Interval] is set to [Set Time], shooting starts at the set time.
Press E to cancel shooting.
After the specified number of images are taken, the camera returns to the standby mode.
t Memo
• When [Save Interim Images] is set to [Unblended] or
[Blended], a new folder is created and the images are saved there for each interval shooting.
• The second and later exposures start at the interval set in
[Interval]. When the shutter speed is longer than the interval set in [Interval], the shooting result varies depending on the
[Fixed Time Release] setting.
Fixed Time
On
Off
Release
When the Shutter Speed Is Longer than the
Interval Set in [Interval]
Some shutter releases are skipped.
Example) When [Interval] is set to 2 seconds, and the shutter speed is set to 3 seconds:
The first exposure has not yet finished at the time the second exposure is supposed to be started (2 seconds after shooting has started), and so the second image is not taken. (Shooting ends before the images specified in [Number of Shots] are taken.)
No shutter releases are skipped.
Example) When [Interval] is set to 2 seconds, and the shutter speed is set to 3 seconds:
The second exposure does not start even 2 seconds after shooting has started, and starts after the first exposure finishes.
(Shooting ends after the images specified in
[Number of Shots] are taken.)
• When [Fixed Time Release] is set to [On], [Minimum] is not available for [Interval]. If [Interval] is set to [Minimum], the setting changes to [1sec.].
• The time set by [Minimum] in [Interval] varies depending on the combination with the A menu functions.
• Set the camera on a fixed support such as tripods during shooting.
Self-timer
1
Select [Timer/Remote Control] on the [Drive
Mode] screen and press D .
2
Use AB to select a setting.
Performs self-timer shooting. (The shutter is released after about 12 seconds.)
Performs self-timer shooting. (The shutter is released after about 2 seconds.)
3
Press E .
The camera returns to the standby mode.
4
Press 0 halfway, and then fully.
The shutter is released after about 12 seconds or 2 seconds.
t Memo
• The self-timer lamp blinks during the countdown for self-timer shooting. You can also make settings so that the lamp does
• A beep sound is made during the countdown for self-timer shooting. You can also make settings so that a beep sound is
• During self-timer shooting, [Shake Reduction] of the A 7 menu is automatically turned off. If you do not want to turn off the [Shake Reduction] function, make settings in [Auto Shake
Reduction Off] of the A 7 menu.
1
If Light Enters through the Viewfinder
When [Self-timer] or [Remote
Control] is used, exposure may be affected by the light entering through the viewfinder. In such a case, use the AE Lock function or attach the optional ME viewfinder cap. Remove the eyecup before attaching the ME viewfinder cap.
Remote Control
Select [Timer/Remote Control] on the [Drive
Mode] screen and press D .
2
Use AB to select a setting.
Performs shooting with the remote control unit.
(The shutter is released immediately.)
Performs shooting with the remote control unit.
(The shutter is released after about 3 seconds.)
3
Press 0 halfway.
4
Point the remote control unit towards the remote control receiver of the camera, and press the shutter release button on the remote control unit.
3
73
3 t Memo
• For B mode, make settings in [Remote Control] of the B 4 menu.
• When shooting with the remote control unit is enabled, the lamp of the camera remote control receiver blinks. You can
also make settings so that the lamp does not blink. (p.110)
• The eye sensor is disabled while [Remote Control] is selected.
• During shooting with the remote control unit, [Shake
Reduction] of the A 7 and B 7 menus is automatically turned off. If you do not want to turn off the [Shake Reduction] function, make settings in [Auto Shake Reduction Off] of the
A 7 and B 7 menus.
• The maximum operating distance of the remote control unit is about 4 m from the front of the camera, and about 2 m from the back of the camera.
• To adjust focus while shooting with the remote control unit, set [AF with Remote Control] to [On] in the E 6 menu.
• When using the Remote Control Waterproof O-RC1, the autofocus system can be operated with the q button on the remote control unit. The r button cannot be used.
• The [Timer/Remote Control] setting is saved even after the power is turned off. If [Timer/Remote Control] is set to Y (Off) in [Memory] of the E 5 menu, the setting returns to [Off] when
the power is turned off. (p.111)
Setting the White
Balance
A 3 / B 3
1
Press C in the standby mode.
Alternatively, select [White Balance] in the A 3 or B 3 menu.
The [White Balance] screen appears.
2
Use AB to select a white balance setting.
Auto White Balance
Multi Auto White Balance
Daylight
Shade
Cloudy
Fl. - Daylight Color
Fl. - Daylight White
Fl. - Cool White
Fl. - Warm White
Tungsten
Color Temperature Enhancement
74
Manual White Balance 1 to 3
Color Temperature 1 to 3
*1 Not available in B mode.
Available operations when shooting with the viewfinder
Main switch to U Uses Digital Preview to preview the background image with the selected setting applied.
H Saves the preview image (only when the image can be saved).
Proceed to Step 5 if you do not need to fine-tune the white balance.
3
Press G .
The fine-tuning screen appears.
t Memo
• When [Multi Auto White Balance] is set, even if various light sources are present at the shooting location, the camera automatically adjusts the white balance according to the light source of each area.
• The settings for the white balance can be made in the A 3 menu.
Auto Adjust. for Source
AWB in Tungsten Light
On, Off
High, Low
• You can also correct the white balance after shooting. (p.95)
3
Available operations
AB Adjusts the Green-Magenta balance.
CD Adjusts the Blue-Amber balance.
M Resets the adjustment value to the default setting.
4
Press E .
The screen of Step 2 reappears.
5
Press E .
The camera returns to the standby mode.
u Caution
• In R mode, the white balance setting is fixed to [Auto
White Balance].
75
3
Adjusting the White Balance Manually
You can measure the white balance at a selected location.
1
Select o 1 to o 3 in Step
When the image for measuring is displayed, proceed to Step 3.
2
Under the light you wish to measure the white balance of, select a white area as the subject, and set the main switch to U .
The captured image is displayed.
3
Press O .
The measuring area selection screen appears.
4
Use ABCD to specify the measuring area.
5
Press E .
The white balance setting screen reappears.
The message [Data process failed.] appears when measuring is unsuccessful. Press E to remeasure the white balance.
t Memo
• You can copy the white balance settings of a captured image and save them as o 1 to o 3 in [Save as Manual WB] of the
C 7 menu.
Adjusting the White Balance with Color
Temperature
You can specify the white balance with the color temperature.
1
Select p 1 to p
3 in Step 2 of “Setting the White
2
Press G .
3
Adjust the color temperature.
Set the color temperature value within the range from 2,500 to
10,000 K (Kelvin).
Available operations
Q Changes the color temperature in increments of 10 K.
V
Changes the color temperature in increments of 100 K.
R
ABCD
Changes the color temperature in increments of 500 K.
Fine-tunes the color temperature.
4
Press E .
The white balance setting screen reappears.
t Memo
• Set [Color Temperature Steps] to [Mired] in the E 6 menu to set the color temperature in mired units. The color temperature can be changed in 20 mired units with Q , and
100 mired units with R . However, figures are converted to and displayed in Kelvin.
76
Using a Flash
When an external flash (optional) is connected to the camera, you can discharge a flash for shooting.
Connecting a Flash
Remove the hot shoe cover from the camera, and attach an external flash.
t Memo
• Refer to “Functions when Using an External Flash” (p.119) for
details on the functions of external flashes.
Setting the Flash Mode
A 2
1
Select [Flash Mode] in the A 2 menu and press
D .
The [Flash Mode] screen appears.
2
Select a flash mode.
Auto Flash
Discharge
Auto Flash+
Red-eye
Automatically measures the ambient light and determines whether to use the flash.
Discharges a pre-flash for red-eye reduction before an automatic flash.
Flash On
Flash On+
Red-eye
Slow-speed
Sync
Slow Sync+
Red-eye
Discharges a flash for each image.
Discharges a pre-flash for red-eye reduction before the main flash for each image.
Sets to a slow shutter speed and discharges a flash for each image.
Use this, for example, when shooting a portrait with the sunset in the background.
Discharges a pre-flash for red-eye reduction before the main flash is discharged with a slow shutter speed.
Available operations
R Compensates the flash exposure (-2.0 to
+1.0).
M Resets the compensation value to the default setting.
3
Press E .
4
Press F .
The camera returns to the standby mode.
t Memo
• The flash modes that can be selected vary depending on the capture mode.
• When the flash is used in J mode, the shutter speed automatically changes over a range from 1/200 seconds to a slow shutter speed depending on the lens being used. The shutter speed is locked at 1/200 seconds when a lens other than a D FA, DA, DA L, FA, FA J, or F lens is used.
• When the flash is used in I , K , or L mode, any desired shutter speed of 1/200 seconds or slower can be set.
3
77
Controlling the Image Finishing
Tone
3
Custom Image
A 6 / B 6
1
Press D in the standby mode.
Alternatively, select [Custom Image] in the A 6 or B 6 menu.
The [Custom Image] screen appears.
2
Use AB to select an image finishing tone.
0
+1
78
Auto Select
Bright
Natural
Portrait
Landscape
Vibrant
Radiant
Muted
Flat
Bleach Bypass
Reversal Film
Monotone
Cross Processing
Available operations when shooting with the viewfinder
Main switch to U Uses Digital Preview to preview the background image with the selected setting applied.
H Saves the preview image (only when the image can be saved).
Proceed to Step 6 when [Auto Select] is selected or if you do not need to change the parameters.
3
Press G .
The parameter setting screen appears.
4
Set the parameters.
+1
+1
Available operations
AB Selects a parameter.
CD
R
Adjusts the value.
Switches between [Sharpness] and [Fine
Sharpness].
M Resets the adjustment value to the default setting.
5
Press E .
The screen of Step 2 reappears.
The adjustment values for parameters are displayed.
6
Press E .
The camera returns to the standby mode.
u Caution
• In R mode, the image finishing tone is fixed to [Auto
Select].
Saving the Cross Processing Settings of a
Captured Image
C 7
The outcome of the random processing function of Cross
Processing varies each time an image is taken. If a cross processed image that you like is taken, you can save the Cross
Processing settings used in the image so that you can repeatedly use the same settings.
1
Select [Save Cross Processing] in the C 7 menu and press E .
The camera searches for cross processed images starting from the most recent image taken.
The message [No image can be processed.] appears if there are no cross processed images.
2
Use Q to select a cross processed image.
3
Use AB to select the save destination from [F1] to [F3], and press E .
The settings of the selected image are saved.
t Memo
• The saved Cross Processing settings can be loaded by
selecting [Cross Processing] in Step 2 of “Custom Image”
(p.78), and selecting one of the saved settings [F1] to [F3] for
the parameter.
Digital Filter
A 6 / B 6
1
Select [Digital Filter] in the A 6 or B 6 menu and press D .
The [Digital Filter] screen appears.
2
Use AB to select a filter.
Select [Off] to not shoot with a digital filter.
Extract Color
Replace Color
Toy Camera
Retro
High Contrast
Shading
Invert Color
Unicolor Bold
Tone Expansion
Bold Monochrome
Grainy Monochrome
*1 Not available in B mode.
Available operations when shooting with the viewfinder
Main switch to U Uses Digital Preview to preview the background image with the selected effect applied.
H Saves the preview image (only when the image can be saved).
Proceed to Step 6 if you do not need to change the parameters.
3
Press G .
The parameter setting screen appears.
3
79
4
Set the parameters.
--
3
0
R
3
3
Available operations
AB Selects a parameter.
CD Adjusts the value.
5
Press E .
The screen of Step 2 reappears.
6
Press E .
7
Press F .
The camera returns to the standby mode.
u Caution
• This function cannot be used in combination with some other
• Depending on the filter used, it may take longer to save images.
t Memo
• You can also process images with digital filters after shooting.
Correcting Images
Adjusting the Brightness
Highlight Correction and Shadow
Correction
A 6 / B
You can reduce the occurrence of overexposed/underexposed areas by expanding the dynamic range and enabling a wider range of tones to be recorded by the CMOS sensor.
Make settings in [D-Range
Correction] of the A 6 or B 6 menu.
D-Range Correction
Highlight Correction
Shadow Correction u Caution
• When the ISO sensitivity is set to less than ISO 200,
[Highlight Correction] cannot be set to [On].
t Memo
• In B mode, [Highlight Correction] can be set to [Auto] or
[Off].
6
80
HDR Capture A 4
You can take an image having wide dynamic range even in a scene where the dynamic range becomes narrow by taking three consecutive images at three different exposure levels and compositing them.
1
Select [HDR Capture] in the A 4 menu and press
D .
The [HDR Capture] screen appears.
2
Select a capture type in
[HDR Capture], and press
E .
HDR Capture
HDR Capture
Bracket Value
Auto Align
±2.0EV
On
3
Set the range in which to change the exposure in
[Bracket Value].
Select a range from [±1.0EV], [±2.0EV], and [±3.0EV].
4
Set whether to use [Auto Align] or not.
5
Press F twice.
The camera returns to the standby mode.
u Caution
• [HDR Capture] cannot be used in the following situations.
• In M or N mode
• In B mode
• This function cannot be used in combination with some other
• When [Drive Mode] is set to [Interval Shooting] in the A 4 menu, [Auto Align] is fixed to [Off].
• When [Auto Align] is set to [Off], [Shake Reduction] of the
A 7 menu is fixed to [Off].
• For HDR Capture, multiple images are combined together to create a single image, so it may take time to save the image.
Adjusting the Lens Properties
The following corrections can be made in [Lens Correction] of the A 6 menu.
Lens Correction
Distortion Correction
Peripheral Illumin. Corr.
Lat-Chromatic-Ab Adj
Diffraction Correction
A 6
Distortion
Correction
Peripheral
Illumin. Corr.
Lat-Chromatic-
Ab Adj
Diffraction
Correction
Reduces distortions occurring due to lens properties.
Reduces peripheral light fall-off occurring due to lens properties.
Reduces lateral chromatic aberrations occurring due to lens properties.
Corrects blur caused by diffraction when using a small aperture.
t Memo
• Corrections can only be made when a compatible lens is
attached. (p.116) The corrections are disabled when using an
accessory such as rear converters that is attached between the camera and the lens.
• When [File Format] is set to [RAW] or [RAW+JPEG] in the
A 5 menu, correction information is saved as a RAW file parameter and you can select [On] or [Off] for applying the correction to the images when developing them with [RAW
Development] of the C 4 menu. When developing RAW images with [RAW Development], [Color Fringe Correction] is
3
81
3
Adjusting the Image Quality Level and
Texture
Shooting High-Definition Images A 4
Pixel Shift Resolution is the function that enables outputting a highdefinition image of a stationary object by merging four images.
Make settings in [Pixel Shift
Resolution] of the A 4 menu.
Pixel Shift Resolution
Securely mount the camera on a tripod and then shoot a still subject. Correction is applied when the subject moves.
Tripod (Motion Corr. On)
Tripod (Motion Corr. Off)
Off
Reducing Moiré A 4
By shaking the Shake Reduction unit, a moiré reduction effect simulating that of a low-pass filter can be achieved.
1
Select [AA Filter Simulator] in the A 4 menu and press D .
2
Select a capture type and press E .
AA Filter Simulator
Low
High
Bracketing (Off, High)
Bracketing (Off, Lo, Hi)
Off
82
Tripod (Motion
Corr. On)
Tripod (Motion
Corr. Off)
Off
Reduces mosaic-pattern noise when a moving object is detected.
Does not detect moving objects.
Does not use Pixel Shift Resolution.
When shooting is performed, captured four images are displayed in turn, and then they are merged into a single image.
t Memo
• The use of Pixel Shift Resolution function in combination with
[Mirror Lock-up Shooting], [Self-timer], or [Remote Control] of
[Drive Mode] in the A 4 menu is recommended.
• While the Pixel Shift Resolution function is used, [Shake
Reduction] is fixed to [Off] in the A 7 menu.
u Caution
• The Pixel Shift Resolution function cannot be used in the following situations.
• In M or N mode
• In B mode
• This function cannot be used in combination with some other
• While the Pixel Shift Resolution function is used, [AA Filter
Simulator] is fixed to [Off] in the A 4 menu.
• When shooting with [Pixel Shift Resolution], use a tripod and mount the camera on it securely.
Low
High
Bracketing
(Off, High)
Bracketing
(Off, Lo, Hi)
Takes images while balancing the resolution and moiré reduction.
Prioritizes the moiré reduction.
Takes consecutive two images in order of
[Off] and [High].
Takes consecutive three images in order of [Off], [Low], and [High].
u Caution
• This function cannot be used in combination with some other
• [Bracketing (Off, High)] and [Bracketing (Off, Lo, Hi)] cannot be selected in the following situations.
• In M mode
• When [Drive Mode] is set to other than [Single Frame
Shooting] in the A 4 menu
• While [HDR Capture] or [Pixel Shift Resolution] of the A 4 menu is used
• When the shutter speed is faster than 1/1000 seconds, the full effect of this function cannot be achieved.
Adjusting the Texture
The texture and surface details of an image can be adjusted in the range of
-4 to +4.
Make settings in [Clarity] of the A 6 menu.
Clarity
A 6
Reducing Blurring of Images
A 7 / B 7
By using the built-in Shake Reduction unit of the camera, blurring of images can be reduced.
Press 5 or use [Shake Reduction]
Shake Reduction of the A 7 menu to turn on and off this function.
Applies Shake Reduction to match camera conditions.
Auto
Panning
Off
Enhancing the Skin Tone
The skin tone of portraits can be enhanced.
Make settings in [Skin Tone] of the
A 6 menu.
A 6
Skin Tone
Adjusts the hue and lightness of the skin based on the detected face.
Type 1
Type 2
Off
Type 1
Type 2
Determines the skin tone of the subject by the Face
Detection function, and creates a natural-looking skin tone. (The skin tone is enhanced only when a face is detected.)
Softens the entire image, and makes skin irregularities less noticeable.
Auto
Panning
Off
Automatically switches between the normal Shake
Reduction function and the Shake Reduction function specialized for panning.
Turns on the Shake Reduction function specialized for panning a slowly moving subject.
Turns off the Shake Reduction function.
In B mode, select [On] or [Off].
t Memo
• [Shake Reduction] is fixed to [Off] in the following situations.
• In M mode
• When [Drive Mode] is set to [Mirror Lock-up Shooting],
[Self-timer], or [Remote Control] in the A 4 menu
• While [Pixel Shift Resolution] of the A 4 menu is used
• To not turn [Shake Reduction] off while [Self-timer] or
[Remote Control] of [Drive Mode] in the A 4 menu is used, set [Auto Shake Reduction Off] to [Disable Auto SR Off] in the
A 7 or B 7 menu.
• You can set the camera operation when 5 is pressed in
[Shake Reduction] of [Fx Button] in the E
u Caution
• The operating noise of the Shake Reduction unit may be recorded during movie recording.
3
83
Correcting the Skew of Images
A 7
The horizontal camera angle detected by the electronic level can be corrected. Make settings in [Auto
Horizon Correction] of the A 7 menu.
Auto Horizon Correction
Ensures the camera shoots at a level position by rotating the sensor according to tilt detected by the electronic level.
On
Off
3
Fine-tuning the Composition
A 7
By using the Shake Reduction mechanism, the composition of the image can be fine-tuned. Use this function when you want to adjust the composition, such as when using a tripod while shooting with Live View.
1
Set [Composition Adjustment] to [On] in the A 7 menu.
2
Press F .
The camera returns to the standby mode.
3
Set the A / K / B dial to K .
The [Composition Adjustment] screen appears.
4
Adjust the composition.
The adjustment values are displayed at the top right of the screen.
5
Press E .
The camera returns to the standby mode with Live View.
u Caution
• [Composition Adjustment] cannot be used while
[ASTROTRACER] of the A 4 menu is used.
t Memo
• The adjusted composition is saved even if Live View is ended or the camera is turned off. To reset the saved adjustment value when the camera is turned off, set [Composition
Adjustment] to Y (Off) in [Memory] of the E
• If [Composition Adjustment] is registered in [Fx Button] in the
E 2 menu, you can start the composition adjustment by
Available operations
ABCD Moves the composition of the image (up to 24 steps).
R
M
Corrects the tilt of the composition (up to 8 steps). (The tilt is not corrected when the amount of adjustment steps is 17 or more.)
Resets the adjustment value to the default setting.
84
Using the Playback Functions
You can select the playback functions from the C
or on the “playback function selection screen”.
Press H in the playback mode to display the playback function selection screen. The functions of the
C 2 to C 7 menus can be selected on the playback function selection screen.
u Caution
• The playback functions that are not supported by the displayed image cannot be used.
t Memo
• Even if a playback function is executed for an image, the shooting date of the image is not changed.
Setting the Operation in the Playback
Mode
C 1
You can set the basic operation in the playback mode in the
C 1 menu.
The following settings can be made.
Select Playback Card
Auto Image Rotation
Playback Order Options
SD1, SD2
On, Off
File No., Shooting Date/Time
Playback Sound Volume 0 to 40
Touch Img. Browse Effect On, Off t Memo
• The playback function is executed for the memory card in the slot selected in [Select Playback Card].
Changing the Playback Method
Displaying Multiple Images
You can display 20, 48, or 70 thumbnail images at the same time.
1
Turn R to the left in the playback mode.
The multi-image display screen appears.
Available operations
ABCD Moves the selection frame.
Q
G
Shows the next/previous page.
Changes the number of thumbnail images displayed on a page.
M
H
Switches between the SD1 card and the
SD2 card.
Displays the playback function selection screen.
L Deletes multiple images.
2
Press E .
The selected image appears in the single image display.
4
85
4
Selecting Multiple Images
When multiple images are displayed, you can select images and execute the playback functions for them.
1
Press F or H
The C menu or playback function selection screen is displayed.
2
Use AB to select a function, and press E .
3
Select images to execute the function for.
t Memo
• You can execute the function for the images selected individually along with the images selected by specifying the range.
• Refer to the following pages for details on each function.
• When a function that cannot be executed for multiple images is selected in Step 2, the selected function is applied to the image with the selection frame.
• When [File Transfer] is selected in
Step 2, you can select [Transfer
Reservation] or [Cancel
Reservation]. Select [Transfer
File Transfer
Reservation] to select the format of transferred files and make a transfer reservation. Select [Cancel
Reservation] to cancel the transfer reservation for all images.
86
Available operations
ABCD Moves the selection frame.
E
J
R
Confirms/cancels the selection of the image.
Specifies the start and end points for image selection range.
Shows the selected image in the single image display.
Use Q to show a different image.
4
Press G .
The confirmation screen appears.
5
Select [Execute] and press E .
Displaying Images by Folder or Shooting
Date
You can display images by folder where the images are saved or by shooting date, and execute a playback function for them.
Whether the images are displayed by folder or by shooting date depends on the [Playback Order Options] setting in the C 1 menu.
1
Turn R
to the left in Step 1 of “Displaying
The folder display screen or shooting date display screen appears.
100 101 102 103
104 105 106 107
108 109 110 111
9999
01/01 01/02 01/03 01/04
01/05 01/06 01/07 01/08
01/09 01/10 01/11 01/12
Available operations
ABCD Moves the selection frame.
R to the right
Displays the multi-image display screen.
9999
M
H
Switches between the SD1 card and the SD2 card.
Displays the playback function selection screen.
L Deletes the images by the selected folder or by the selected shooting date.
2
Press E .
The images in the selected folder or on the selected shooting date are displayed.
t Memo
• When the playback function selection screen is displayed in Step 1, a function can be executed for all images in the selected folder or on the selected shooting date. If a function that cannot be executed for multiple images is selected, an error message is displayed.
Connecting the Camera to an AV Device
You can connect the camera to an AV device, such as a TV, equipped with an HDMI
®
terminal to display Live View images while shooting or to display images in the single image display in the playback mode.
Make sure to have a commercially available HDMI ® cable equipped with an HDMI
®
terminal (Type D).
1
Turn the AV device and camera off.
2
Open the terminal cover of the camera, and connect the cable to the HDMI
®
terminal.
3
Connect the other end of the cable to the input terminal on the AV device.
4
Turn the AV device and camera on.
The camera turns on in the video output mode, and the camera information is displayed on the screen of the connected AV device.
u Caution
• While the camera is connected to an AV device, nothing is displayed on the camera monitor. Also, you cannot adjust the sound volume on the camera. Operate the camera while viewing the monitor of the AV device.
4
87
4 t Memo
• Check the operating manual of the AV device and select a suitable input terminal for connecting the camera.
• If you intend to use the camera continuously for a long period,
the use of the optional AC adapter kit is recommended. (p.41)
Organizing Files
Deleting Images
C 2
1
Select [Delete] in the C 2 menu or on the playback function selection screen.
2
Select [Delete 1 Image] or [Delete All Images].
For images captured with [File
100-0001
Format] set to [RAW+JPEG], select the file format to delete.
When [Delete All Images] is selected, proceed to Step 4.
3
Use Q to select an image.
4
Press E .
When [Delete All Images] is selected, the confirmation screen appears. Proceed to Step 5.
5
Select [Execute] and press E .
88
Protecting Images
You can protect images from being accidentally deleted.
1
Select [Protect] in the C 2 menu or on the playback function selection screen.
2
Select [Protect 1 Image] or
[Protect All Images].
When [Protect All Images] is selected, proceed to Step 4.
C 2
3
Use Q to select an image.
4
Press E .
When [Protect All Images] is selected, the confirmation screen appears. Proceed to Step 5.
5
Select [Protect] and press E . u Caution
• Even protected images are deleted if the inserted memory card is formatted.
t Memo
• To cancel the protection for an image, set the protection for the image again.
Rotating Images
C 2
When [Auto Image Rotation] is set to [On] (default setting) in the
C 1 menu, the image is automatically rotated based on the rotation information during playback.
The rotation information of an image can be changed by following the procedure below.
1
Display the image to rotate in the single image display.
2
Select [Image Rotation] in the C 2 menu or on the playback function selection screen.
3
Use AB to select the desired rotation direction and press E .
The image rotation information is saved, and the camera returns to the single image display mode.
u Caution
• You cannot change image rotation information in the following cases.
• Protected images
• Movies
• Images without a rotation information tag t Memo
• You can save the rotation information at a specific angle in
[Save Rotation Info] of the E 6 menu.
4
89
4
Copying Images
C 2
You can copy images between memory cards in the SD1 slot and the SD2 slot.
1
Select [Image Copy] in the C 2 menu or on the playback function selection screen.
2
Select [Copy 1 Image] or [Copy All Images].
For images captured with [File
100-0001
Format] set to [RAW+JPEG], select the file format to copy.
When [Copy All Images] is selected, proceed to Step 4.
3
Use Q to select an image.
4
Press E .
When [Copy All Images] is selected, select [Execute] and press E .
The selected image is copied to the other memory card.
Transferring Images
C 2
You can select images to transfer to a communication device and make a transfer reservation. When the camera is connected to a communication device via a wireless LAN, the file transfer automatically starts.
1
Select [File Transfer] in the C 2 menu or on the playback function selection screen.
2
Select [Transfer 1 Image].
For images captured with [File
Format] set to [RAW+JPEG], select the file format to transfer.
100-0001
3
Use Q to select an image.
4
Press E .
The transfer reservation is made for the image.
t Memo
• To cancel the transfer reservation, select [Transfer 1 Image] again.
90
Saving the RAW Data
C 2
You can save the RAW data when it remains in the buffer of the captured JPEG image.
1
Select [Save RAW Data] in the C 2 menu in the single image display.
The confirmation screen appears.
When no JPEG images have RAW data, the message [No image can be processed.] is displayed.
2
Select [Save RAW Data] and press E .
The RAW data is saved.
Editing and Processing Images
You can edit and process the images captured with the camera.
Processing Images with Digital Filters
C 3
1
Display the image to edit in the single image display.
2
Select [Digital Filter] in the C 3 menu or on the playback function selection screen.
The [Digital Filter] screen appears.
3
Use AB to select a filter.
4 u Caution
• The RAW data cannot be saved from the playback function selection screen.
t Memo
• When a JPEG image that has RAW data is displayed in the single image display, you can also save the data by pressing
O .
• The images for which [Save RAW Data] is executed are treated the same as the images captured with [File Format] set to [RAW+JPEG] in the A 5 menu.
Base Parameter Adj
Extract Color
Replace Color
Toy Camera
Retro
High Contrast
Shading
Invert Color
Unicolor Bold
Tone Expansion
Bold Monochrome
Grainy Monochrome
Miniature
Soft
Fish-eye
Slim
Monotone
Frame Composite
Available operations
N Displays the preview.
Proceed to Step 7 if you do not need to change the parameters.
4
Press G .
The parameter setting screen appears.
91
5
Set the parameters.
4
Available operations
AB Selects a parameter.
CD Adjusts the value.
6
Press E .
The screen of Step 3 reappears.
7
Press E .
The filter addition confirmation screen appears.
8
Select [Add Filter] or [Save], and press E .
Select [Add Filter] when you want to apply additional filters to the same image.
The screen of Step 3 reappears.
When [Save] is selected, the save confirmation screen appears.
9
Select [SD1] or [SD2], and press E .
u Caution
• Only JPEG and RAW images captured with this camera can be edited with [Digital Filter].
• RAW images captured using [HDR Capture] or [Pixel Shift
Resolution] of the A 4 menu cannot be processed with
[Digital Filter].
t Memo
• Up to seven filters, including the filter used during shooting that is set in [Digital Filter] of the A
applied to the same image.
Developing RAW Images
C 4
You can convert RAW images into the JPEG or TIFF format and then save them as new files.
1
Display the image to edit in the single image display.
2
Select [RAW Development] in the C 4 menu or on the playback function selection screen.
The RAW development setting screen appears.
3
Select the setting item to change.
100-0108
White Balance
Custom Image
Sensitivity
Digital Filter
Clarity
Skin Tone
HDR Capture
Pixel Shift Resolution
Distortion Correction
Peripheral Illumin. Corr.
Available operations
Q
Selects a different image.
AB Selects a setting item.
D Makes detailed settings.
N Displays the preview.
4
Press G .
The save confirmation screen appears.
Lat-Chromatic-Ab Adj
Diffraction Correction
Color Fringe Correction
High-ISO Noise Reduction
Shadow Correction
File Format
JPEG Recorded Pixels
JPEG Quality
Aspect Ratio
Color Space
92
5
Select [SD1] or [SD2], and press E .
6
Select [Continue] or [Finish], and press E .
When [Continue] is selected, the screen of Step 3 reappears.
u Caution
• [RAW Development] can be executed only for RAW images captured with this camera.
• The RAW images captured when [Drive Mode] is set to [Multiexposure] or [Interval Composite] in the A 4 menu are developed according to the [Lens Correction] setting used during shooting. The [Lens Correction] setting cannot be changed when developing the RAW images.
t Memo
• When [RAW Development] is executed from the multi-image display screen, folder display screen, or shooting date display screen, a new folder is created, and the images are stored in it.
• For [Digital Filter], [Clarity], [Skin Tone], [HDR Capture], and
[Pixel Shift Resolution], the setting item of which parameters can be changed varies depending on the item used during shooting. For the RAW images captured using [HDR Capture] or [Pixel Shift Resolution], you cannot change the parameters of [Digital Filter], [Clarity], and [Skin Tone] when developing the RAW images.
• With the provided software “Digital Camera Utility 5”, you can
develop RAW images on a computer. (p.98)
Changing the Image Size
u Caution
• Images already resized or cropped to the minimum file size cannot be processed.
Changing the Number of Recorded Pixels
(Resize)
C 5
You can change the number of recorded pixels of the selected image, and save it as a new file.
1
Display the image to edit in the single image display.
2
Select [Resize] in the C 5 menu or on the playback function selection screen.
The [Resize] screen appears.
3
Use AB to select the number of recorded pixels and press E .
You can select an image size smaller than that of the original image.
The save confirmation screen appears.
4
Select [SD1] or [SD2], and press E .
u Caution
• [Resize] can be executed only for JPEG images captured with this camera.
4
93
4
Cropping Out Part of the Image (Cropping) C 3
You can crop out only the desired area of the selected image, and save it as a new file.
1
Display the image to edit in the single image display.
2
Select [Cropping] in the C 3 menu or on the playback function selection screen.
The [Cropping] screen appears.
3
Specify the size and position of the area to crop by using the cropping frame.
Correcting JPEG Images
C 5
Correcting Highlight/Shadow Areas (Levels
Adjustment)
You can adjust the brightness and contrast of the highlight, midtone, and shadow areas in images.
1
Display the image to edit in the single image display.
2
Select [Levels Adjustment] in the C 5 menu or on the playback function selection screen, and press D .
The [Levels Adjustment] screen appears.
3
Adjust the value.
Available operations
R Changes the size of the cropping frame.
ABCD
G
Moves the cropping frame.
Changes the aspect ratio.
Q
H
M
Rotates the image by 0.1°.
Rotates the cropping frame by 90° (only when possible).
Resets the rotation settings.
4
Press E .
The save confirmation screen appears.
5
Select [SD1] or [SD2], and press E .
Available operations
G Switches the adjustment points.
CD
M
Adjusts the value.
Automatically adjusts the value.
N Displays the preview.
4
Press E .
The save confirmation screen appears.
5
Select [SD1] or [SD2], and press E .
94
Correcting the White Balance
You can adjust the white balance.
1
Display the image to edit in the single image display.
2
Select [WB Adjustment] in the C 5 menu or on the playback function selection screen, and press D .
The [WB Adjustment] screen appears.
3
Adjust the value.
Correcting Color Moiré
You can reduce color moiré in images.
1
Display the image to edit in the single image display.
2
Select [Color Moiré Correction] in the C 5 menu or on the playback function selection screen.
The [Color Moiré Correction] screen appears.
3
Adjust the value.
4
Low
Available operations
AB Adjusts the Green-Magenta balance.
CD
M
Adjusts the Blue-Amber balance.
Resets the adjustment value to the default setting.
N Displays the preview.
4
Press E .
The save confirmation screen appears.
5
Select [SD1] or [SD2], and press E .
Available operations
AB Selects the correction level.
N Displays the preview.
4
Press E .
The save confirmation screen appears.
5
Select [SD1] or [SD2], and press E .
u Caution
• Some images may not be corrected properly.
• If [Color Moiré Correction] is executed, color loss or color bleeding may occur.
95
4
Editing Movies
C 6
1
Display the movie to edit in the single image display.
2
Select [Extract Movie] or [Divide Movie] in the
C 6 menu or on the playback function selection screen.
Extract Movie
Saves the range specified with the start and end points as a new file.
Divide Movie
Divides a movie into two files at the specified devision point and saves as new files.
3
Press E .
The [Extract Movie] screen or [Divide Movie] screen appears.
4
Select the point where you want to divide the movie.
You can play or pause the movie in the same manner as when
Available operations
Q When [Extract Movie] is selected: Moves the start or end point.
When [Divide Movie] is selected: Moves the division point.
G
M
When [Extract Movie] is selected: Switches between the start and end points.
Synchronizes the points.
N Displays the preview.
5
Press E .
The save confirmation screen appears.
6
Select [SD1] or [SD2], and press E .
96
Using the Camera with a
Computer
Connect the camera to a computer using the provided USB cable.
Setting the Connection Mode
D 4
Set the connection mode in [USB Setting] of the D 4 menu according to the operation to be performed with a computer.
MTP
(default setting)
CD-ROM
Allows you to copy the data in the memory card to a computer or perform tethered shooting by operating the camera with a computer.
The memory card is displayed on the computer.
Allows you to install the provided software stored in
The software is displayed as the software installation CD-ROM [S-SW177] on the computer.
t Memo
• Refer to “Operating Environment for USB Connection and
Provided Software” (p.130) for system requirements to
connect the camera to a computer and use the provided software.
• The following functions are disabled while the camera is connected to a computer with a USB cable.
• [Wireless LAN Setting] of the D 4 menu
• [Auto Power Off] of the D 5 menu
Copying an Image on the Memory Card
1
Turn the camera off.
2
Open the terminal cover of the camera, and connect the USB cable to the USB terminal.
3
Connect the USB cable to the USB port of the computer.
4
Turn the camera on.
The camera is recognized by the computer.
For Mac, the app “Photos” starts. (When the app does not start, start it manually.)
5
Save the captured images to the computer.
6
Disconnect the camera from the computer.
t Memo
• Charging of the battery starts when the camera is turned off after it is connected to the computer.
• On the computer, the memory cards are displayed as [SD1] and [SD2].
5
97
5
Installing the Provided Software
The provided software “Digital Camera Utility 5” is stored in the internal memory of the camera. With “Digital Camera Utility 5”, you can develop RAW images, make color adjustments, or check shooting information on the computer.
The software can be installed by following the procedure below.
1
Set [USB Setting] to [CD-ROM] in the D 4 menu.
2
Turn the camera off.
3
Connect the camera to a computer using a USB cable.
4
Turn the camera on.
The camera is recognized as CD-ROM [S-SW177].
5
Open [S-SW177] on the computer.
The [Win] or [Mac] folder appears.
6
Open the [Win] or [Mac] folder.
7
Double-click [setup32.exe] or [setup64.exe] for
Windows, or [INSTPUT5.pkg] for Mac.
For subsequent steps, follow the on-screen instructions.
8
Return [USB Setting] to [MTP] in the D 4 menu.
9
Turn the camera off and back on.
The [USB Setting] setting switches to [MTP].
Operating the Camera with a Computer
You can perform tethered shooting with the camera connected to a computer using the optional “IMAGE Transmitter 2”.
1
Set [USB Setting] to [MTP] in the D 4 menu.
2
Turn the camera off.
3
Connect the camera to a computer using a USB cable.
4
Turn the camera on.
5
Start “IMAGE Transmitter 2” on the computer.
“IMAGE Transmitter 2” is started and the computer recognizes the camera.
u Caution
• When the A / K / B dial is set to B , tethered shooting is not available until a memory card is inserted to the camera.
t Memo
• For details on “IMAGE Transmitter 2”, download and refer to the latest version of the “User Guide [Operation]” available at the following website.
http://www.ricoh-imaging.co.jp/english/support/ download_manual.html
• During tethered shooting, the camera always operates with
[Release-priority] regardless of the autofocus settings ([AF.S
Setting] of [AF with Viewfinder] and [Contrast AF Options] of
[AF with Live View] in the A
98
Using the Camera with a
Communication Device
You can connect the camera to a communication device wirelessly via Bluetooth ® or wireless LAN. By using the dedicated app “Image Sync”, the camera can be operated from the communication device and the images saved in the memory cards can be displayed on the communication device to import them.
Refer to the separate “Wireless Communication Guide” for how to use the camera connected with a communication device.
5
99
Camera Settings
Saving Frequently Used Settings
E 1
You can save up to ten frequently used settings and assign the settings to O to 5 of the mode dial so that you can easily use the settings for shooting.
The following settings can be saved.
Exposure mode (except for R )
Shutter speed and aperture value
ISO sensitivity
Exposure value compensation
A menu and E menu settings (with exceptions)
6
100
Saving the Settings
You can save up to ten settings.
1
Set the exposure mode and all the necessary settings to save.
2
Select [Save User Mode Settings] in the E 1 menu and press D .
The [Save User Mode Settings] screen appears.
3
Select a box from [BOX1] to [BOX10], and press E .
Save User Mode Settings
BOX1 :
BOX2 :
BOX3 :
BOX4 :
BOX5 :
BOX6 :
4
Select whether to enter the box name and press
E .
When [Cancel] is selected, proceed to Step 7.
When [Enter Name] is selected, the text-entry screen appears.
5
Enter the box name.
Up to 32 single-byte alphanumeric characters and symbols can be entered.
q 㹵 e a s d r t f y g h u i j k o p l z x c v b n m
123
Available operations
ABCD Moves the cursor.
J
N
E
Switches between upper and lower case letters.
Switches between alphabetical and numeric characters.
Enters a character at the position of the cursor.
L Deletes a character from the entered text.
6
After entering the text, press G .
7
Select a user mode to register the saved settings
Save User Mode Settings
Assign settings saved in User Mode Box to Mode Dial.
to from USER1 ( O ) to
USER5 ( 5 ) of the mode dial, and press E .
The screen of Step 3 reappears.
USER1: XXXXXXXXX
USER2:
USER3: u Caution
• [Save User Mode Settings] cannot be selected when the mode dial is set to R .
t Memo
• If the box name is not entered, the date and time when the settings are saved are used as the box name.
• To change the box name, select [Rename User Mode] in the
E 1 menu.
• To reset the saved settings, select [Reset User Mode
Settings] in the E 1 menu.
Changing the Settings
You can change the settings assigned to the mode dial.
1
Select [Recall User Mode Setting] in the E 1 menu and press D .
The [Recall User Mode Setting] screen appears.
2
Select a user mode to register the saved settings to from USER1 ( O ) to
USER5 ( 5 ) of the mode dial, and press D .
Recall User Mode Setting
Assign settings saved in User Mode Box to Mode Dial.
USER1:
USER2:
USER3:
3
Select the saved settings from [BOX1] to
[BOX10], and press E .
The selected settings are assigned to the mode dial.
The screen of Step 2 reappears.
t Memo
• If [Recall User Mode Setting] is registered as a function displayed in the control panel, you can use R to change the box when the mode dial is set to O to 5
Using the User Mode
1
Set the mode dial to O to 5 .
2
Change the settings as necessary.
The exposure mode can be
Exposure in User Mode temporarily changed in
[Exposure in User Mode] of the
E 1 menu.
Program AE
Sensitivity Priority AE
Shutter Priority AE
Aperture Priority AE
Shutter & Aperture Prior.
Manual Exposure t Memo
• The settings changed in Step 2 are not saved as the user mode settings. When the camera is turned off or the mode dial is turned, the user mode settings are reset to the originally saved ones. The timing to reset the user mode settings can be set in [User Settings Restoration] in the E 1 menu.
Setting
Type 1
Type 2
Type 3
When the camera is turned off
Reset
Not reset
Reset
When the mode dial is
Not reset
Reset
Reset turned
• If the settings saved in the box assigned to the mode dial are changed, the settings applied to the mode dial are also changed.
6
101
6
Customizing the Operating Controls
Setting the Button Operation E 2
You can set the functions for when ABCD , 5 , O , 7 ,
2 , 3 , or H is pressed. These customizable buttons are called “Fx button”.
The function set for each button can be checked on the status screen.
1
Select [Fx Button] in the E 2 menu and press D .
The [Fx Button] screen appears.
2
Use AB to select a button and press D .
Fx Button
The screen to set the function for the selected button is displayed.
Shake Reduction Button
RAW Button
Operation Lock Button
3
Use AB to select the function to assign to each button.
Shake Reduction Button
Unset
Focus Peaking
Face Detection
AE Lock
AE Metering
Flash Mode
The following functions can be assigned.
Focus Peaking
Face Detection
AE Lock
AE Metering
Flash Mode
White Balance
Drive Mode
Drive
Bracketing
Timer/Remote Control
HDR Capture
Pixel Shift Resolution
AA Filter Simulator
Crop
Custom Image
Shake Reduction
Auto Horizon Correction
Operation Control Lock
One Push LV
Monitor Touch Operation
Viewfinder Light
LCD Panel Illumination
Electronic Level Display
Playback Mode
Outdoor View Setting
Night Vision Display
Wireless LAN Setting
*1 Changes the number of shots and bracket value.
*2 Changes the file format according to the [File Format] setting
when the button is pressed. (p.103)
*3 Displays the [Composition Adjustment] screen when the A / K /
B dial is set to K .
*4 Switches to shooting with Live View while keeping the A / K /
B dial set to A .
4
Press E .
The screen of Step 2 reappears.
Repeat Steps 2 to 4.
5
Press F twice.
102
t Memo
• You can check the functions assigned to each button on the status screen.
• You can set the same function to multiple buttons.
• The setting switches or the setting screen appears when the Fx button is pressed.
SR
250
1600
01/01/2021
10:10
FF
9999
9999
• Depending on the assigned function, a beep sounds when the Fx button is pressed. To not make a beep sound, change the [Fx Button Operation] setting of [Sound Effects Setting] in the D
• When [Shake Reduction] or [Operation Control Lock] is assigned to the Fx button, press G on the screen of Step
2 to set the camera operation when the button is pressed.
Shake Reduction
Operation
Control Lock
OFF→AUTO→PAN (panning)
AUTO→PAN (panning)
OFF→AUTO
OFF→PAN (panning)
Exposure Change Lock (shutter speed, aperture value, ISO sensitivity, EV
Compensation, M , AE Lock)
Misoperation Prevention ( ABCD ,
6 , F )
Setting the One Push File Format
You can temporarily change the file format by pressing the button during shooting. Select the file format to change to when the button is pressed for each [File Format] setting.
1
Select [One Push File Format] in Step 3 of
“Setting the Button Operation” (p.102).
2
Press G on the [Fx Button] screen.
The [One Push File Format] screen appears.
3
Make the [JPEG Options],
[RAW Options], and
[RAW+JPEG Options] settings.
Select the file format to change to when each button is pressed.
One Push File Format
JPEG Options
RAW Options
RAW+JPEG Options
Cancel after 1 Shot On
4
Make the [Cancel after 1 Shot] setting.
On
Off
The file format returns to the [File Format] setting in the A 5 menu after an image is taken.
The file format is retained until any of the following operations is performed.
• Turning the camera off
• Switching the user modes
• Setting the camera to the payback mode
• Setting the camera to the B mode
5
Press F twice.
The camera returns to the standby mode.
u Caution
• The button to which the One Push File Format function is assigned cannot be used when [Memory Card Options] is set to [Separate RAW/JPEG] in the A
6
103
Setting the Autofocus and AE Lock Operations E 2
You can set the button operations and timing for autofocus and
AE Lock in [AF/AE Lock Settings] of the E 2 menu.
The following settings can be made for [Still Image].
Still Image
Enable AF
Enable AF
Shutter/AF Button
Shooting AE Lock
6
Shutter/AF Button Sets the operations when 0 is pressed halfway or I is pressed.
Shooting AE Lock Sets the timing to lock the exposure value.
In B mode, the I function is fixed to the autofocus operation.
Set whether to perform autofocus with 0 .
t Memo
• When a lens that is capable of AF tracking is attached to the camera, you can turn on and off the tracking operation by pressing E during movie recording.
Setting the E-dial Operation E 2
For each exposure mode, you can set the functions for when
Q or R is turned, when M is pressed, and when [E-Dial] is set for the Smart Function and V is turned.
1
Select [E-Dial Programming] in the E 2 menu and press D .
The [E-Dial Programming] screen appears.
2
Select [Still Image] or
[Movie], and press D .
The exposure mode selection screen appears.
E-Dial Programming
Still Image
Movie
Rotation Direction
HYPER P/Sv Options
3
Use CD to select an exposure mode and press
E .
The current settings are displayed.
4
Select [Basic Operation] and press D .
Still Image
Sets the e-dial operation for each exposure mode.
E-Dial Programming
Basic Operation
Green Button
S.Fn Dial (E-Dial)
5
Use AB to select the combination of functions for when Q , R , or V is turned and when M is pressed.
Basic Operation
Changes the shutter speed.
Shifts the shutter speed.
Changes the aperture value.
Shifts the aperture value.
Changes the ISO sensitivity.
Automatically adjusts the ISO sensitivity.
Shifts the ISO sensitivity.
Compensates the exposure value.
Resets the compensated exposure value.
104
Executes the Program Shift.
Executes the Program Line.
Sets the camera to the hyper mode.
Sets the camera to the advanced hyper mode.
Cancels the hyper mode.
Enables/Disables the timed exposure.
Not available
6
Press E .
The screen of Step 4 reappears.
When [E-Dial] is set for the Smart Function, make the [S.Fn
Dial (E-Dial)] setting.
7
Press F .
The screen of Step 3 reappears.
Repeat Steps 3 to 7.
8
Press F three times.
t Memo
• You can check the functions assigned to each dial on the status screen.
• When assigning a function to V , assign [E-Dial] to [Smart
Function] in the E
• If you select [Rotation Direction] on the screen of Step 2, you can reverse the effect obtained by turning Q or R .
• If you select [HYPER P/Sv Options] on the screen of Step 2, you can set the camera operation when the camera enters the hyper mode in G or H mode.
Standard
Advanced
Determines the exposure by prioritizing the last changed shutter speed and aperture value.
Fixes the changed exposure parameters: ISO sensitivity, shutter speed, and aperture value.
When all parameters are changed, the camera enters the hyper L mode.
6
105
Setting the Smart Function E 2
You can register five functions for the Smart Function.
1
Select [Smart Function] in the E 2 menu and press D .
The [Smart Function] screen appears.
2
Select a function number from [Function 1] to
Smart Function
Specifies the functions that can be used with Smart Function and the settings
[Function 5], and press D .
that can be selected.
Function 1
Function 2
Function 3
6
106
3
Use AB to select the function to assign to each function number.
The following functions can be assigned.
Up to six settings can be registered for a function. The order of the settings can also be registered.
Unset
User AF
AF Mode
Hold AF Status
Focus Peaking
AE Metering
E-Dial
ISO Sensitivity
EV Compensation
Flash Exposure Compensation
AA Filter Simulator
Crop
Shake Reduction
Zoom Review
Grid Guide
Outdoor View Setting
*1 The camera operates with the [AF Mode], [AF Active Area], and
[Hold AF Status] settings made in advance in [AF with Viewfinder].
*2 Press G to make detailed settings.
*3 You can change the ISO sensitivity and exposure compensation values between the values registered in advance for each exposure mode by turning V .
4
Press E .
The screen of Step 2 reappears.
Repeat Steps 2 to 4.
5
Press F twice.
Customizing the Control Panel E 5
You can customize the functions displayed on the control panel.
Some functions in the A , B , and D menus can be saved as control panel items.
1
Select [Control Panel] in the E 5 menu and press
D .
2
Select [Still Image] or [Movie], and press D .
The control panel customization screen appears.
3
Use ABCD to select the function to change.
Select the location of the item you want to change.
ISO AUTO MAX
6400
4
Press E .
Selectable functions are displayed in the pop-up menu.
5
Use AB to select the function to save.
Select [--] if you do not want to save any function.
HDR Capture
AF Mode
ISO AUTO MAX
6400
6
Press E .
The screen of Step 3 reappears.
Press M to reset to the default functions.
7
Press F three times.
t Memo
• When the control panel is displayed from the standby mode, you can display the screen of Step 3 by pressing J to customize the control panel.
Setting the Monitor Display, Indicator Lamp
Illumination, and Sound Effects
Eye Sensor
E 4
You can set the camera operation when the eye sensor detects the user’s eye in [Eye Sensor] of the E 4 menu.
Link Monitor
Display
AE with Eye
Sensor
Detection
Sensitivity
Turns off the monitor backlight when the eye sensor detects the user’s eye.
Starts metering when the eye sensor detects the user’s eye.
Sets the eye sensor detection sensitivity.
Viewfinder Display
E 4
You can set the display in the viewfinder in [Viewfinder Display] of the E 4 menu.
Viewfinder
Screen
Electronic Level
Type
Viewfinder Light
Info Display
Outside FOV
Sets the combination of display items from among the grid guide, electronic level, AF frame, spot metering frame, AF points,
and Smart Function icons (p.107).
Sets the electronic level type to
[Level+Tilt] or [Level].
Sets whether to illuminate the viewfinder.
When [Auto] is set, the viewfinder is illuminated only in dark places.
Sets whether to display information such as the exposure value outside the field of view in the viewfinder.
Setting the Viewfinder Screen Display
You can switch the viewfinder display between the registered four patterns. You can also change the items to display for each pattern.
1
Select [Viewfinder Screen] in [Viewfinder
Display] of the
E
4 menu, and press
D
.
The [Viewfinder Screen] screen appears.
2
Select [Current Display
Pattern] and press
D
, and select a pattern from F1 to
F4.
Viewfinder Screen
Current Display Pattern
Available Display Pattern
F1 Customization
F2 Customization
F3 Customization
F4 Customization
F1
1/2/3/4
3
When customizing the display items, select [F1
Customization] to [F4 Customization], and press
D
.
The grid style can be selected, and the display of each item can be turned on and off.
F1 Customization
Grid Guide
Electronic Level Display
AF Frame
Spot Metering Frame
AF Points
S.Fn Display
4
Press
F
four times.
t
Memo
• You can easily switch the viewfinder screen patterns using the Smart Function or control panel. If there are patterns that you do not want to use, select
[Available Display Pattern] on the screen of Step 2 and set them to Y
(Off).
Available Display Pattern
Select a display pattern that can be switched via the control panel and
Smart Function during shooting.
F1
F2
F3
6
107
LCD Panel E 4
You can set the illumination of the LCD panel in [LCD Panel] of the E 4 menu.
Illumination
Brightness
Sets the brightness to [Low] or [High].
LCD Panel
Illumination
[Auto]: Illuminates the LCD panel when the metering is started while shooting with the viewfinder.
[Manual]: Illuminates the LCD panel when the button to which [LCD Panel Illumination] is assigned in [Fx Button] of the E 2 menu is pressed.
[Off]: Does not illuminate the LCD panel.
6
Monitor Display E 4
You can set the information displayed on the monitor in [Monitor
Display] of the E 4 menu.
Color Settings
Status Screen
Live View
Playback Info
Display
Grid Guide
Sets [Color] and [Style] of the status screen and control panel.
Sets [Auto Display Rotation], [Electronic
Level Display], [Electronic Level Type], and
[Electronic Level Design].
Sets [Shooting Info Display], [Electronic
Level Type], [Electronic Level Design], and
[Flicker Reduction].
Sets the information to display when the screen is switched with G in the playback mode.
Sets [Grid Style] and [Grid Color] of the grid lines displayed while shooting with Live View and in the playback mode.
Setting the Live View Display
You can switch the Live View display between the registered three patterns. You can also change the items to display for each pattern.
1
Select [Live View] in [Monitor Display] of the E 4 menu, and press D .
The [Live View] screen appears.
2
Select [Shooting Info Display] and press D .
3
Select [Current Display
Pattern] and press D , and select a pattern from L1 to
Shooting Info Display
Current Display Pattern
Available Display Pattern
L1 Customization
L1
1/2/3
L2 Customization
L3.
L3 Customization
4
When customizing the display items, select [L1
Customization] to [L3 Customization], and press
D .
The display of each item can be turned on and off.
L1 Customization
Histogram
Grid Guide
Highlight Alert
Electronic Level Display
5
Press F four times.
t Memo
• You can switch the Live View shooting information display by pressing G during shooting. If there are patterns that you do not want to use, select [Available
Display Pattern] on the screen of
Step 3 and set them to Y (Off).
Available Display Pattern
Select a display pattern that can be switched with the INFO button during shooting.
L1
L2
L3
108
Monitor Adjustment D 2
You can set the brightness, saturation, and color balance of the monitor.
1
Select [Monitor Adjustment] in the D 2 menu and press D .
The monitor adjustment screen appears.
2
Set each item.
Available operations
AB Selects the item.
CD
G
M
Adjusts the value.
[Brightness]: Switches between the automatic adjustment and the manual adjustment.
Resets the adjustment value to the default setting.
3
Press E .
u Caution
• [Brightness] cannot be set when the monitor brightness is adjusted with [Outdoor View Setting] of the D 2 menu.
t Memo
• The eye sensor is used when the automatic adjustment
(default setting) is selected for [Brightness]. If the eye sensor is in the shade or exposed to strong light, the brightness may not be adjusted correctly. To not change the brightness automatically, use the manual adjustment.
Instant Review E 4
You can set the display and operation of “Instant Review” that is displayed immediately after shooting in [Instant Review] of the
E 4 menu.
Display Time
Manage Img.
(AE-L Btn.)
Sets the Instant Review display time.
When [Display Time] is set to [Hold],
Instant Review is displayed until the next operation.
Zoom Review
Save RAW (RAW
Button)
Displays the magnified image with R during Instant Review.
Saves the RAW data with O during
Instant Review.
Delete Img.
(Delete Btn.)
Deletes the displayed image with during Instant Review.
L
Displays the file management screen (for
[Delete], [Save RAW Data], [Protect], and
[Transfer Reservation]) with H during
Instant Review.
Histogram
Highlight Alert
Displays the histogram during Instant
Review.
Displays the highlight alert during Instant
Review.
6
Zoom Review E 4
You can set the camera operation when the display is zoomed in [Zoom Review] of the E 4 menu.
Quick Zoom
Focus
Magnification
[Display Magnification]: Sets the display magnification for the quick zoom function.
[Zoom Trigger]: Sets the trigger operation for the quick zoom function.
Zooms the display centering on the focused point.
109
6
Warning Display E 4
You can set whether to display the warning icon in the viewfinder and on the LCD panel and monitor in [Warning
Display] of the E 4 menu.
Release Lock
Warning
Release Timer
Warning
Image
Processing
Warning
Displays the warning icon when the shutter cannot be released because there is no available space on the memory card or due to other problems.
Displays the warning icon when the shutter cannot be released immediately because
[Timer/Remote Control] is turned on in [Drive
Mode] of the A 4 menu or due to other problems.
Displays the warning icon when a function for which the image processing takes a long time after shooting, such as [HDR Capture] and [Pixel Shift Resolution] in the A 4 menu, is enabled.
Indicator Lamps D 3
You can set whether to light up the indicator lamps in [Indicator
Lamps] of the D 3 menu.
Self-timer
Remote
Control
GPS Unit
Makes the indicator lamps blink during the countdown for shooting with [Self-timer (12 sec.)], [Self-timer (2 sec.)], or [Remote
Control (3 sec.)] in [Drive Mode] of the A 4 menu.
Makes the indicator lamps blink during the standby for shooting with [Remote Control] in
[Drive Mode] of the A 4 menu.
Lights up the indicator lamps when the GPS unit is attached to the camera.
Sound Effects D 3
You can set the sound volume of beep sounds in [Sound Effects
Volume] (0 to 5), and set whether to make beep sounds in
[Sound Effects Setting] of the D 3 menu.
Electronic
Shutter Sound
In-focus
AE Lock
Count Down
Mirror Up
Fx Button
Operation
Makes an electronic shutter sound while shooting with [Pixel Shift Resolution] of the
A 4 menu.
Makes a beep sound when the subject is focused.
Makes a beep sound when the exposure value is locked.
Makes a beep sound during the countdown for shooting with [Self-timer] or [Remote
Control (3 sec.)] in [Drive Mode] of the A 4 menu.
Makes a beep sound during the mirror lockup shooting with [Mirror Lock-up Shooting] in
[Drive Mode] of the A 4 menu.
Makes a beep sound when the Fx button is pressed, to which [One Push File Format],
[Crop], [Shake Reduction], [Auto Horizon
Correction], [Monitor Touch Operation],
[Viewfinder Light], [LCD Panel Illumination],
[Electronic Level Display], [Night Vision
Display], or [Wireless LAN Setting] is assigned.
110
Selecting Settings to Save in the
Camera
E 5
The setting values for most functions of this camera are saved even if the camera is turned off. For the following function settings, you can select
Memory
ISO Sensitivity
EV Compensation
Flash Mode
Flash Exposure Comp.
whether to save the settings ( Z : On) or to return the settings to their default
White Balance
Drive values ( Y : Off) when the camera is turned off. Make settings in [Memory] of the E 5 menu.
ISO Sensitivity
EV Compensation
Flash Mode
Flash Exposure Compensation
White Balance
Drive
Timer/Remote Control
HDR Capture
Pixel Shift Resolution
Crop
Custom Image
Digital Filter
Clarity
Skin Tone
Composition Adjustment
Shooting Info Display
Playback Info Display
Image for Playback
Operation Control Lock
Outdoor View Setting
Night Vision Display t Memo
• When [Reset] of the D 8 menu is performed, all [Memory] settings return to the default values.
File Management Settings
Specifying the Folder/File Settings
D 1
Create New Folder
When [Create New Folder] is selected in the D 1 menu, a folder is created with a new number when the next image is saved.
u Caution
• You cannot successively create multiple folders.
t Memo
• A new folder is automatically created in the following cases.
• When [Drive Mode] is set to [Interval Shooting] in the A 4
• When [Save Interim Images] is set to [Unblended] or
[Blended] in [Interval Composite] of [Drive Mode] in the
A
• When [RAW Development] of the C 4 menu is executed from the multi-image display screen, folder display screen,
or shooting date display screen (p.92)
6
111
Folder Name
When images are captured with this camera, a folder is automatically created and the captured images are stored in it.
Each folder name consists of a sequential number from 100 to
999 and a string of five characters.
The character string in the folder name can be changed.
1
Select [Folder Name] in the
D 1 menu and press D .
The [Folder Name] screen appears.
Folder Name
Folder Name
Enter Text
Date
PENTX
100_MMDD
6
2
Select [Date] or [Optional] for [Folder Name] and press E .
Date
Optional
The four digits of the month and day of the shooting date are assigned after the folder number.
The month and day appear according to the date format set in [Date Adjustment] of the D 7 menu.
Example) 101_0125: The folder for images captured on January 25th
A freely defined string of five characters is assigned after the folder number.
(Default setting: PENTX)
Example) 101PENTX
The screen of Step 1 reappears.
When you select [Date] or do not need to change the character string, proceed to Step 6.
3
Press B to select [Enter Text], and press D .
The text-entry screen appears.
4
Change the text.
Enter five single-byte alphanumeric characters.
PENT X
Q 㹕 E R
A S D
T
F G
Y
H
U
J
I O
K L
P
123
Cancel
Z X C V B N M
_
OK
Available operations
ABCD Moves the cursor.
N Switches between alphabetical and numeric characters.
E Enters a character at the position of the cursor.
5
After entering the text, press G .
The screen of Step 1 reappears.
6
Press F twice.
t Memo
• A folder with a new number is created when the folder name is changed.
u Caution
• The maximum folder number is 999. After the folder number reaches 999, you cannot capture new images if you attempt to change the folder name or create a new folder, or when the file name number reaches 9999. In this case, perform [Reset
Numbering] in the D 1 menu.
112
File Name
One of the following string of characters is used as the file name prefix depending on the [Color Space] setting in the A 5 menu.
Color Space File Name sRGB IMGP .JPG
AdobeRGB _IMG .JPG
The first four characters can be changed to a character string of your choice.
1
Select [File Name] in the D 1 menu and press D .
The [File Name] screen appears.
2
Select [Still Image] or
[Movie], and press D .
The text-entry screen appears.
File Name
Still Image
Movie
IMGP
IMGP
IMGP0001.JPG
IMGP0001.MOV
_IMG0001.JPG
3
Change the text.
Up to four single-byte alphanumeric characters can be entered as an alternative for the first part of the file name, while the asterisks stand for figures that increase automatically shot by shot.
y
4
Press F twice.
t Memo
• When [Color Space] is set to [AdobeRGB], the file name prefix is “_” and first three characters of the entered character string becomes the file name.
• For movies, regardless of the [Color Space] setting, the file name is “IMGP .MOV” or the one with the entered string of characters.
Sequential Numbering
In [Sequential Numbering] of the D 1 menu, you can set whether to continue the sequential numbering for folder and file names even when a
Sequential Numbering
Folder & File
File
Off new folder is created or when memory cards are replaced.
The serial number is continued or reset at the following timings depending on the [Sequential
Numbering] setting.
Sequential
Numbering
When a new folder is created
File No.
When memory cards are replaced
Folder Name File No.
Folder &
File
File
Off
Continue
Continue
Reset
Continue
Reset
Reset
Continue
Continue
Reset
Reset Numbering
When a new image is taken after [Reset Numbering] of the D 1 menu is performed, a folder with a new folder number is created and the file number starts from 0001.
t Memo
• When the file number reaches 9999, a new folder is created and the file number is reset.
6
113
6
Setting the Copyright Information
D 1
You can set the photographer and copyright information embedded in the Exif data.
1
Select [Copyright Information] in the D 1 menu and press D .
The [Copyright Information] screen appears.
2
Select [Embed Copyright
Data] and press D , select
[On] or [Off], and press E .
Copyright Information
Embed Copyright Data
Photographer
Copyright Holder
On
XXXXXXXXXXXXXXX
XXXXXXXXXXXXXXX
3
Select [Photographer] or [Copyright Holder], and press D .
The text-entry screen appears.
4
Change the text.
Up to 32 single-byte alphanumeric characters and symbols can be entered.
y
5
Press F twice.
t Memo
• The Exif information can be checked in the “detailed
information display” in the playback mode (p.15) or using the
provided software “Digital Camera Utility 5”.
114
Restrictions on the Combinations of Special Functions
AA Filter
Simulator
Continuous
Shooting
Bracketing
Mirror Lock-up
Shooting
Multi-exposure
Interval Shooting
Interval Composite
#
#
#
AA Filter Simulator
HDR Capture
Pixel Shift Resolution
*1 [Bracketing] is not available.
*2 Only the final frame can be saved.
×
×
#
#
#
HDR
Capture
×
×
×
×
×
×
×
Pixel Shift
Resolution
×
×
×
×
×
×
×
ASTRO-
TRACER
×
×
×
×
×
×
×
Digital Filter/
Clarity/
Skin Tone
#: Restricted
×
: Not available
Distortion
Correction/
Diffraction
Correction
Save RAW
Data
×
#
×
×
×
×
×
×
#
#
#
7
115
7
Functions Available with Various
Lenses
All capture modes are available when a D FA, DA, DA L, FA, or
FA J lens is used, or when a lens with an 9 position is used with the aperture ring set to the 9 position.
When other lenses than above are used, or a lens with an 9 position is used in a position other than 9 , the following restrictions apply.
x : Available #: Restricted
×
: Not available
Lens
[Mount type]
D FA
DA
DA L
FA
FA J
A
M
P
Function
[KAF]
[KAF2]
[KAF3]
[KAF4]
[KAF]
[KAF2]
[KAF] [KA] [K]
Autofocus
(Lens only)
Manual focus
(With matte field) x
— x x
— x x
— x
—
# x
—
# x
Quick-shift focus
AF Active Area [Auto Area]
#
x
AE Metering [Multi-segment] x
× × × × x x x x
×
x
×
×
G / H / I / J / K mode x x x x #
x x L mode
Power zoom
Automatic obtaining of the lens focal length information
Lens Correction x
— x
#
x
#
x
#
x x x x
— — x
× ×
× × ×
#
×
—
*1 Lenses with a maximum aperture of F2.8 or faster. Only available at the 9 position.
*2 Lenses with a maximum aperture of F5.6 or faster.
*3 Available when using AF540FGZ, AF540FGZ II, AF360FGZ,
AF360FGZ II, AF201FG, AF200FG, or AF160FC.
*4 Only available with compatible lenses.
*5 [Distortion Correction] and [Peripheral Illumin. Corr.] are disabled when a DA FISH-EYE 10-17mm lens is used.
*6 To use an FA SOFT 28mm F2.8 lens, FA SOFT 85mm F2.8 lens, or
F SOFT 85mm F2.8 lens, set [Using Aperture Ring] to [On] in the E 6 menu. Images can be taken with the aperture you set, but only within a manually adjustable aperture range.
*7 The auto zoom and preset zoom are disabled.
*8 The Lens Correction is available with the following FA lenses (only
[Distortion Correction] and [Lat-Chromatic-Ab Adj] can be used when the aperture ring is set to a position other than 9 .):
FA k 24mm F2 AL [IF], FA 28mm F2.8 AL, FA 31mm F1.8 Limited, FA
35mm F2 AL, FA 43mm F1.9 Limited, FA 50mm F1.4, FA 77mm F1.8
Limited, FA k
85mm F1.4 [IF], FA k
200mm F2.8 ED [IF],
FA k MACRO 200mm F4 ED, FA k 300mm F2.8 ED [IF], FA k 300mm
F4.5 ED [IF], FA k 400mm F5.6 ED [IF], FA k 600mm F4 ED [IF],
FA k
28-70mm F2.8 ED [IF], FA k
80-200mm F2.8 ED [IF], and
FA k 250-600mm F5.6 ED [IF].
*9 Fixed to [Spot].
*10 J with the aperture set to wide open. (The aperture ring has no effect on the actual aperture value.) u Caution
• When the aperture ring is set to a position other than 9 or a lens without an 9 position or accessories such as an extension tube are used, the camera does not operate unless
[Using Aperture Ring] is set to [On] in the E 6 menu. Refer to
“Using the Aperture Ring” (p.118). for details.
• When a retractable lens is attached and is not extended, you cannot take images or use some functions. If the lens is retracted during shooting, the camera stops working.
116
Lens Names and Mount Names
MF
S
K
Mount
KA
S
Lens
Name
P, M
A
D FA
Lens Type
For 35mm full-frame size
AF
KAF
KAF2
KAF3
KAF4
DA
FA
FA J
F
DA
FA
D FA
DA
For 35mm full-frame size
For APS-C size
Without the aperture ring
For 35mm full-frame size
Power zoom not compatible
For 35mm full-frame size
Without the aperture ring
For 35mm full-frame size
For APS-C size
Compatible with the built-in motor
Without the aperture ring
For 35mm full-frame size
Power zoom compatible
For 35mm full-frame size
Dedicated for the built-in motor
Without the aperture ring
For APS-C size
Dedicated for the built-in motor
Without the aperture ring
• DA lenses with a motor and FA zoom lenses with a power zoom use the KAF2 mount. (Of these lenses, the lenses without an AF coupler use the KAF3 mount.)
• The KAF3 mount equipped with an electromagnetic diaphragm mechanism instead of an aperture control lever is referred to as the KAF4 mount.
• FA single focal length lenses, DA and DA L lenses without a motor, and D FA, FA J, and F lenses use the KAF mount.
Refer to respective lens manuals for details.
Restrictions on the Selection of AF Points
When the following lenses are used, the AF points on both sides cannot be used while shooting with the viewfinder.
See RICOH IMAGING website for the latest information.
AF points for type A lenses
AF points for type B lenses
Type
A
B
(As of October 2020)
Lens smc PENTAX-F 35-70mmF3.5-4.5
smc PENTAX-F 35-80mmF4-5.6
smc PENTAX-FA 28mmF2.8AL
smc PENTAX-FA 28mmF2.8 soft smc PENTAX-FA 35-80mmF4-5.6
smc PENTAX-FAJ 18-35mmF4-5.6
smc PENTAX-FAJ 28-80mmF3.5-5.6
smc PENTAX-DA FISH-EYE10-17mmF3.5-4.5ED[IF]
HD PENTAX-DA FISH-EYE10-17mmF3.5-4.5ED
smc PENTAX-DA 50-200mmF4-5.6 ED smc PENTAX-DA 50-200mmF4-5.6 ED WR smc PENTAX-DAL 50-200mmF4-5.6 ED smc PENTAX-DAL 50-200mmF4-5.6 ED WR smc PENTAX-DA 18-250mmF3.5-6.3ED AL[IF] smc PENTAX-DA 15mmF4ED AL Limited
HD PENTAX-DA 15mmF4ED AL Limited smc PENTAX-DA 21mmF3.2AL Limited
HD PENTAX-DA 21mmF3.2AL Limited
HD PENTAX-DA 560mmF5.6ED AW
7
117
7
Using the Aperture Ring
E 6
The shutter can be released even if the aperture ring of the D
FA, FA, F, or A lens is not set to the 9 position or a lens without an 9 position is attached.
Set [Using Aperture Ring] to [On] in the E 6 menu.
Using Aperture Ring
Shutter will release when aperture ring is not set to the
"A" position.
On
Off
With the automatic exposure control, the camera operates as follows.
Mode Dial
M
L mode
M mode
Camera Operation
G , H , J J mode
I
K
When the ISO sensitivity is set to ISO Auto: K mode
When the ISO sensitivity is set to a fixed value:
L mode
K mode
L
N N mode t Memo
• [F--] appears for the aperture indicator on the status screen, etc. When [Aperture Info Record] is set to [On] in the E 6 menu, the aperture value set with Q , R , and V is displayed, and only “F” blinks.
• Set [Aperture Info Record] to [On] in the E 6 menu to record the aperture value set for recording with Q , R , and V in captured images.
u Caution
• When shooting using the automatic exposure control, note the following points.
• Images can be taken with the set aperture value but an exposure deviation may occur.
• When shooting with the optical viewfinder, you cannot check the shutter speed and ISO sensitivity before shooting because the metering is performed immediately before the shutter is released. When shooting with Live
View, you can check the shutter speed and ISO sensitivity before shooting because the aperture is always narrowed down.
• When a lens with automatic diaphragm is attached, the aperture is narrowed down immediately before the shutter is released, causing a time lag in the shutter release.
How to Achieve the Correct Exposure with the Aperture
Ring Not Set to 9
The correct exposure can be achieved by the following procedures when the aperture ring is not set to 9 .
1 Set the mode dial to L .
2 Set the aperture ring to the desired aperture.
3 Press M .
The correct shutter speed will be set.
4 If the correct exposure cannot be achieved, adjust the
ISO sensitivity.
118
Setting the Focal Length
E 6
The Shake Reduction function operates by obtaining the lens information such as focal length. Set the focal length when using a lens that the focal length information cannot be automatically obtained.
1
Set [Using Aperture Ring] to [On] in the E 6 menu.
2
Turn the camera off.
3
Attach a lens to the camera and turn the camera on.
The [MF Lens Focal Length] screen appears.
4
Use ABCD to set the focal length.
The focal length can also be selected from the input history by pressing G .
MF Lens Focal Length
When using a lens that cannot acquire the focal length, enter a focal length applied to camera control.
0 0 3 5
Select History mm
5
Press E .
t Memo
• The focal length setting can be changed in [MF Lens Focal
Length] of the E 6 menu.
• When a zoom lens is used, set the actual focal length which the zoom is set to.
• To not input the focal length at the camera startup when a lens that cannot automatically obtain the focal length information is attached to the camera, set [Length Input on
Startup] to [Off] in the E 6 menu.
• To record the focal length information you input in the image when a lens that cannot automatically obtain the focal length information is attached, set [Using Aperture Ring] to [On] in the E 6 menu.
Functions when Using an
External Flash
Use of the following external flashes (optional) enables a variety of flash modes, such as P-TTL auto flash mode.
x : Available #: Restricted
×
: Not available
Camera Function
Compatible Flash
AF540FGZ
AF540FGZ II
AF360FGZ
AF360FGZ II
AF201FG
AF200FG
AF160FC
Red-eye reduction flash x x
#
Automatic switch to the flash sync speed
Automatic setting of the aperture value in
G or I mode
P-TTL auto flash
Slow-speed Sync flash
Flash Exposure Compensation
AF assist light of the external flash
Contrast Control Sync flash
Slave flash
High-speed Sync flash
Wireless flash x
x
x
x
x x
×
#
#
×
×
× x
#
#
x
7
119
7
*1 Only the R mode is available for the capture mode.
*2 Available only when using a D FA, DA, DA L, FA, FA J, F, or A lens.
(When using a lens with an aperture ring, set the aperture ring to the
9 position.)
*3 AF assist light is not available with the AF540FGZ or AF360FGZ.
*4 Shutter speed of 1/100 seconds or slower.
*5 Not available with the AF200FG or AF160FC.
*6 Multiple AF540FGZ, AF540FGZ II, AF360FGZ, or AF360FGZ II units are required.
*7 Available only when combined with the AF540FGZ, AF540FGZ II,
AF360FGZ, or AF360FGZ II.
u Caution
• Flashes with the reversed polarity (the center contact on the hot shoe is minus) cannot be used due to the risk of damaging the camera and flash.
• Do not combine with accessories that have a different number of contacts, such as Hot Shoe Grip, as a malfunction may occur.
• Combining with flashes from other manufacturers may cause equipment breakdown.
t Memo
• With the AF540FGZ, AF540FGZ II, AF360FGZ, or
AF360FGZ II, you can use the high-speed sync flash to discharge a flash and take an image at a shutter speed faster than 1/200 seconds. Set the exposure mode to I , K , or
L .
• By using two or more external flashes (AF540FGZ,
AF540FGZ II, AF360FGZ, or AF360FGZ II), you can use the wireless mode to shoot in the P-TTL flash mode without connecting the flash units with a cord. In this case, set the camera channel on the external flashes.
• You can set the flash sync speed in [X Mode Sync Speed] of the E 5 menu.
• You can connect an external flash to the camera with a sync cord by using the X-sync socket. Remove the sync socket 2P cap to connect a sync cord to the X-sync socket.
120
Using the GPS Unit
When the optional GPS Unit O-GPS1 is attached to the camera,
GPS information is saved in the shooting information of an image, and furthermore, the “ASTROTRACER” function can be used.
You can check the GPS positioning status on the status screen and Live
View screen.
250
1600
FF
SR
3D positioning
01/01/2021
10:10
9999
9999
2D positioning
No positioning
When an image is taken while the GPS is on, the GPS information is saved internally in the image file. The GPS information is not saved in the movie file. You can check the
GPS information in “Detailed Information Display” in the
u Caution
• “Electronic Compass”, “Simple Navigation”, and “GPS Time
Sync” cannot be used with this camera.
t Memo
• Refer to the manual of the GPS unit for details on how to attach the unit and information on the unit’s functions.
• Perform a calibration with the GPS unit before shooting using
[Calibration] in [GPS Settings] of the D 4 menu to obtain the
GPS information correctly.
Shooting Celestial Bodies
(ASTROTRACER)
By matching the movement of the Shake Reduction unit built in the camera with the movement of celestial bodies, celestial bodies can be captured as individual points even when shooting with a long exposure setting.
Setting the ASTROTRACER A 4
1
Attach the GPS unit to the camera and turn the camera on.
2
Select [ASTROTRACER] in the A 4 menu and press D .
The [ASTROTRACER] screen appears.
3
Select [ASTROTRACER] and press D .
4
Select a type and press E .
ASTROTRACER
Uses SR to track and capture celestial bodies in B mode.
Enable the GPS unit.
Type 1
Type 2
Off
7
Type 1
Type 2
Tracks and captures celestial bodies in M mode using the Shake Reduction function.
Tracks and captures celestial bodies with settings suitable for starscape photography in
M mode using the Shake Reduction function.
5
Select [Precise Calibration] and press D .
The [Precise Calibration] screen appears.
6
Rotate the camera according to the instruction displayed on the monitor.
The result of calibration appears.
121
7
7
Press
E
.
The screen of Step 4 reappears.
If [Calibration failed. Perform calibration again.] appears, change the camera direction and perform a calibration again.
8
Press
F
twice.
The camera returns to the standby mode.
u
Caution
• When performing a calibration, be careful not to drop the camera. Wrap the strap around your wrist or take other preventive measures.
• If the battery is removed, perform a calibration again after the battery is put back in.
• As the magnetic field environment varies depending on the shooting location, [Precise Calibration] must be performed at each location.
• Changing the lens after performing a calibration may have some effect on the magnetic field environment. In this case, perform a calibration again.
When the Monitor Is Too Bright
When shooing in a dark place for a long period of time, change the [Outdoor View Setting] setting in the D 2 menu to reduce glare.
Also, you can prevent eyes dazzling in dark places by setting
[Night Vision Display] to [On] in the D 2 menu.
Shooting with the ASTROTRACER
1
Set the exposure mode to
M
.
The ASTROTRACER is ready for use.
2
Set the shooting conditions.
Bulb
1600
2′30″
SR
FF
9999
9999
Available operations
M Enables/Disables the timed exposure.
Q
R
Changes the exposure time within the range from 0'01" to 5'00" when the timed exposure is enabled.
Changes the aperture value.
J Performs a precise calibration.
3
Adjust the focus and press
0
.
When the timed exposure is enabled, shooting stops automatically after the set time has elapsed.
When the timed exposure is not set, the exposure continues while 0 is pressed.
u
Caution
• This function cannot be used in combination with some other
• Shooting cannot be performed when the GPS information has not been obtained by the GPS unit.
122
Troubleshooting
t Memo
• In rare cases, the camera may not operate correctly due to causes such as static electricity, etc. This can be remedied by taking the battery out and putting it back in again. If the camera operates correctly, it does not require any repairs.
Problem
The camera does not turn on.
Cause
The battery is not installed properly.
The battery power is low.
There is no available space on the memory card.
Data is being processed.
Check the orientation of the battery.
Insert a memory card with available space or delete unwanted images.
Wait until processing is finished.
Remedy
Charge the battery.
The shutter cannot be released.
The lens aperture ring is set to a position other than
9 .
Set the lens aperture ring to the
9 position or set [Using
Aperture Ring] to [On] in the E 6
Autofocus does not work.
[AF Mode] is set to
[Single AF] and the subject is not in focus.
Set the focus method to w and adjust focus manually.
The subject is difficult to focus on.
The subject is too close.
v cannot work well for lowcontrast objects (the sky, white walls, etc.), dark colors, intricate designs, rapidlymoving objects, or scenery shot through a window or a net-like pattern.
Lock focus on another object located at the same distance as your subject, then aim at the subject and take an image.
Alternatively, use w .
Move away from the subject and take an image.
Problem Cause
The flash does not discharge.
[Flash Mode] is set to [Auto Flash
Discharge].
Remedy
When [Flash Mode] is set to
[Auto Flash Discharge] in the
A 2 menu, the flash does not discharge if the subject is bright.
Change the [Flash Mode]
The memory card is not recognized when the camera is connected to a computer.
The [USB Setting] is set to [CD-
ROM].
Set [USB Setting] to [MTP] in the D
Dust or dirt particles appear in images.
The CMOS sensor is dirty or dusty.
Pixel defects such as bright spots and dark spots appear in the image.
There are defective pixels in the CMOS sensor.
Activate [Dust Removal] from the D 6 menu. The Dust
Removal function can be activated every time the camera is turned on and off.
(p.124) if the problem persists.
Activate [Pixel Mapping] from the D 6 menu.
It takes about 30 seconds to correct the defective pixels, so be sure to install a fully charged battery.
7
123
7
Sensor Cleaning
D 6
Raise the mirror up and open the shutter when cleaning the
CMOS sensor with a blower.
1
Turn the camera off and remove the lens.
2
Turn the camera on.
3
Select [Sensor Cleaning] in the D 6 menu and press D .
The confirmation screen appears.
4
Select [Execute] and press E .
The mirror rises up.
5
Clean the CMOS sensor with a blower.
6
Turn the camera off.
The mirror automatically returns to its original position.
u Caution
• Never use a spray blower or a blower with a brush. The
CMOS sensor may be damaged. Do not wipe the CMOS sensor with a cloth.
• Do not put the tip of the blower inside the lens mount area. If the power is turned off during cleaning, it may cause damage to the shutter, the CMOS sensor, and the mirror. Hold the camera with the lens mount down while cleaning the sensor so dust will fall away from the sensor when the blower is used.
• When the battery level is low, the message [Not enough battery power remaining to clean sensor.] is displayed on the monitor. Install a fully charged battery. If the battery capacity becomes low during cleaning, a warning beep will sound. In this case, stop cleaning immediately.
t Memo
• Please contact your nearest service center for professional cleaning as the CMOS sensor is a precision part.
• You can use the optional Image Sensor Cleaning Kit O-ICK1 when cleaning the CMOS sensor.
124
Error Messages
Error Message
Memory card full.
No image.
This image cannot be displayed.
No card in the camera.
Description
The memory card is full and no more images can be saved. Insert a new memory card or delete unwanted files.
There are no images that can be played back on the memory card.
You are trying to play back an image in a format not supported by this camera. You may be able to play it back on a computer.
There is no memory card inserted in the camera.
Memory card error.
Card is not formatted.
Card is locked.
This card cannot be used.
The memory card has a problem, and image capture and playback are impossible. You may be able to play back or recover the images on a computer.
The memory card you have inserted is unformatted or has been previously used on another device and is not compatible with this camera. Use the card after formatting it with this camera.
The write-protect switch on the memory
card you have inserted is locked. (p.135)
A memory card not compatible with this camera is inserted.
You are trying to magnify an image that cannot be magnified.
This image cannot be magnified.
Not enough battery power remaining to activate Pixel
Mapping.
Not enough battery power remaining to clean sensor.
Not enough battery power remaining to update the firmware.
Not enough battery power remaining to provide USB power supply.
The battery level is too low to perform
[Pixel Mapping] or [Sensor Cleaning] of the D 6 menu, or to update the firmware.
Install a fully charged battery.
The battery level is too low to perform
[USB Power Supply to Ext.] of the D 5 menu. Install a fully charged battery.
Unable to update firmware.
There is a problem with the firmware update file.
The firmware cannot be updated. The update file is damaged. Try downloading the update file again.
Error Message
Image folder cannot be created.
Unable to store image.
Data process failed.
No image can be processed.
This image cannot be processed.
This function cannot process multiple images as a batch.
This function is not available in the current mode.
The camera will turn off to prevent damage from overheating.
Turn the lens zoom ring to the position where shooting is possible.
Description
The maximum folder number (999) is being used, and no more images can be saved. Insert a new memory card or format the card.
The image could not be saved because of a memory card error.
The operation failed. Try the operation again.
There are no images with which RAW images can be developed or Cross
Processing settings can be saved.
You are trying to perform C menu functions for the images captured using other cameras or perform [Resize] or
[Cropping] for the minimum file-size images, or the maximum number of digital filters that can be applied to an image is reached.
You are trying to perform a playback function that cannot be performed for multiple images on the folder display screen or shooting date display screen.
You are trying to set a function that is not available with the currently selected capture mode.
The camera will turn off because its internal temperature is too high. Leave the camera turned off until it has had time to cool down before turning on the camera again.
Images cannot be taken when a retractable lens is attached and is not
7
125
Main Specifications
7
126
Camera
Model Description
Type
Lens Mount
Compatible
Lenses
TTL autofocus, auto-exposure SLR digital camera
PENTAX KAF2 bayonet mount (AF coupler, lens information contacts, K-mount with power contacts)
KAF4, KAF3, KAF2 (power zoom compatible), KAF,
KA mount lenses
Image Capture Unit
Image Sensor
Effective Pixels
Total Pixels
Dust Removal
Sensitivity
(Standard Output)
Image Stabilizer
AA Filter
Simulator
Primary color filter, CMOS, Size: 23.3 × 15.5 (mm)
Approx. 25.73 megapixels
Approx. 26.78 megapixels
Image sensor cleaning using ultrasonic vibrations
“DR II”
ISO Auto, Manual ISO range: 100 to 1600000
• EV steps can be set to 1 EV, 1/2 EV, or 1/3 EV.
Sensor-shift Shake Reduction “SR II” (5-axis image stabilization system), Setting: Auto, Panning, Off
Moiré reduction using the SR unit: Off, Low, High,
Bracketing (2 images), Bracketing (3 images)
File Formats
Recording
Formats
Recorded Pixels
Quality Level
Color Space
Storage Media
RAW (PEF/DNG), JPEG (Exif 2.3 compliant), DCF
2.0 compliant
JPEG: q (26M: 6192 × 4128) p (15M: 4752 × 3168)
RAW: o (9M: 3648 × 2432) r (2M: 1920 × 1280)
(26M: 6192 × 4128)
RAW (14bit): PEF, DNG
JPEG: m (Super Fine), l (Fine), k
(Economy)
• RAW + JPEG simultaneously recordable sRGB, AdobeRGB
SD/SDHC*/SDXC* memory cards
* UHS-I/UHS-II compatible (UHS-II is only available for the memory card inserted in the SD1 slot.)
Dual Card Slots
Storage Folder
Storage File
Sequential Use, Save to Both, Separate RAW/
JPEG, Copying images between slots possible
Folder Name: Date (100_1018, 101_1019...) or a user-assigned name (default: PENTX)
File Name: User-assigned name (default:
IMGP )
File No.: Sequential Numbering, Reset
Viewfinder
Type Pentaprism finder
Coverage (FOV) Approx. 100%
Magnification
Eye-Relief Length
Approx. 1.05× (FA 50mm F1.4 at infinity)
Approx. 20.5 mm (from the view window)
Approx. 22.0 mm (from the center of lens)
Diopter
Adjustment
Approx. -4 to +1 m
-1
Focusing Screen Natural-Bright-Matte III focusing screen
Overlay Items
AF points, Grid display, Electronic level, AF frame,
Spot metering frame, Frame for cropping, Smart
Function icons, Operation Control Lock icon
Live View
Type
Focusing System
Function
Display
TTL method using the CMOS image sensor
Contrast detection (Auto Area, Zone Select,
Tracking, Select (L, M, S), Spot)
Focus Peaking, Face Detection, Touch AF
Field of view: approx. 100%, Magnified view (up to
16×), Grid Display (4×4 Grid, Golden Section, Scale,
Square (L), Square (S), Grid Color: Black, Gray,
White), Histogram, Highlight Alert, Composition
Adjustment
LCD Monitor
Type
Size
Dots
Touch Panel
Adjustment
Outdoor View
Setting
Wide viewing angle TFT color LCD with air-gapless tempered glass
3.2 inches (aspect ratio 3:2)
Approx. 1620K dots
Capacitance type
Brightness (Auto, Manual), saturation, and colors adjustable
Adjustable ±2 steps
Night Vision Display On, Off
White Balance
Type
Preset Modes
Method using a combination of the CMOS image sensor and the RGB-Ir sensor
Auto White Balance, Multi Auto White Balance,
Daylight, Shade, Cloudy, Fluorescent ( D : Daylight
Color, N : Daylight White, W : Cool White, L : Warm
White), Tungsten, n , Manual White Balance (up to
3 settings), Color Temperature (up to 3 settings),
Copying the white balance settings of a captured image
Fine Adjustment Adjustable ±14 steps on A-B axis and G-M axis
Focus System
Type
Focus Sensor
Brightness Range
AF Modes
Focusing Area
Selection Modes
AF Assist Light
TTL phase-matching detection autofocus
SAFOX13, 101 points (25 cross type focus points in the center)
EV -4 to 18 (ISO 100, at normal temperature)
• -4 EV is only available for AF points that support
F2.8 light flux when an F2.8-light-flux compatible lens is attached.
Single AF (AF.S), Continuous AF (AF.C)
Auto Area, Zone Select, Select, Expanded Area AF
(S, M, L), Select (S), Spot
Dedicated LED AF assist light
Exposure Control
AE Metering
TTL open-aperture metering using 307K pixel RGB-
Ir sensor
Metering modes: Multi-segment, Center-weighted,
Spot, Highlight-weighted
Metering Range EV -3 to 20 (ISO 100 at 50mm F1.4)
Exposure Modes
Scene Analyze Auto, Program, Sensitivity Priority,
Shutter Priority, Aperture Priority, Shutter & Aperture
Priority, Manual, Bulb, Flash X-sync Speed, USER1,
USER2, USER3, USER4, USER5
EV Compensation ±5 EV (1/3 EV steps or 1/2 EV steps can be selected)
AE Lock
Button type (timer-control: two times the meter operating time set in customization setting); continues as long as 0 is halfway pressed.
Shutter
Type
Shutter Speed
Electronically controlled vertical-run focal plane shutter
• Electronic shutter is used for Pixel Shift
Resolution.
Auto: 1/8000 to 30 seconds, Manual: 1/8000 to 30 seconds (1/3 EV steps or 1/2 EV steps), Bulb (timed exposure settable: 1 second to 20 minutes)
Drive Modes
Mode Selection
Timer/Remote
Control
Continuous
Shooting
Single Frame Shooting, Continuous Shooting (H, M,
L), Bracketing (2, 3, or 5 frames), Depth of Field
Bracketing, Motion Bracketing, Mirror Lock-up
Shooting, Multi-exposure (Average, Additive,
Bright), Interval Shooting, Interval Composite
Self-timer (12 or 2 seconds), Remote Control (Now,
3 seconds)
Max. approx. 12 fps, JPEG ( q : m at Continuous
Shooting (H)): Up to approx. 37 frames, RAW: Up to approx. 32 frames, RAW+: Up to approx. 30 frames
Max. approx. 7.0 fps, JPEG ( q : m at
Continuous Shooting (M)): Up to approx. 60 frames,
RAW: Up to approx. 37 frames, RAW+: Up to approx. 33 frames
Max. approx. 2.5 fps, JPEG ( q : m at
Continuous Shooting (L)): Up to approx. 90 frames,
RAW: Up to approx. 39 frames, RAW+: Up to approx. 37 frames
• When the ISO sensitivity is set to ISO 100
• The continuous shooting speed is slower when shooting with a high ISO sensitivity.
External Flash
Flash Modes
Sync Speed
Flash Exposure
Compensation
Auto Flash Discharge, Auto Flash + Red-eye
Reduction, Flash On, Flash On + Red-eye
Reduction, Slow-speed Sync, Slow-speed Sync +
Red-eye Reduction, P-TTL, Contrast Control Sync*,
High-speed Sync, Wireless Sync*
* Available with two or more dedicated external flash units
1/200 seconds
-2.0 to +1.0 EV
Capture Functions
Custom Image
Auto Select, Bright, Natural, Portrait, Landscape,
Vibrant, Radiant, Muted, Flat, Bleach Bypass,
Reversal Film, Monotone, Cross Processing
7
127
7
Cross Processing Random, Preset 1 to 3, Favorite 1 to 3
Digital Filter
Extract Color, Replace Color, Toy Camera, Retro,
High Contrast, Shading, Invert Color, Unicolor Bold,
Bold Monochrome, Grainy Monochrome
Clarity
Skin Tone
-4.0 to +4.0
Type1, Type2
HDR Capture
Pixel Shift
Resolution
Lens Correction
Auto, Type1, Type2, Type3, Advanced HDR
Bracket Value adjustable
Auto Align: On, Off
Tripod (Motion Correction On), Tripod (Motion
Correction Off)
Distortion Correction, Peripheral Illumination
Correction, Lateral Chromatic Aberration
Adjustment, Diffraction Correction
Dynamic Range
Correction
Highlight Correction, Shadow Correction
Noise Reduction
Horizon
Correction
Composition
Adjustment
Electronic Level
Program Line
Slow Shutter Speed Noise Reduction, High-ISO
Noise Reduction
SR On: Corrects up to 1 degree
SR Off: Corrects up to 2 degrees
Adjustment range of ±1.5 mm up, down, left or right
(±1 mm when rotated), Rotating range of ±1 degree
Viewfinder Display (horizontal direction and vertical direction), Monitor Display (horizontal direction and vertical direction)
Auto, Standard, Hi-speed Priority, DOF Priority
(Deep), DOF Priority (Shallow), MTF Priority
Movie
Recording Format MPEG-4 AVC/H.264 (MOV)
Recorded Pixels/
Frame Rate z x
(3840 × 2160, 30p/24p)
(1920 × 1080, 60p/30p/24p)
Sound
Recording Time
Built-in stereo microphone, external microphone
(stereo recording compatible)
Recording Sound Level adjustable, Wind Noise
Reduction
Up to 4 GB or 25 minutes
Automatically stops recording if the internal temperature of the camera becomes high
White Balance
Custom Image
Auto White Balance, Daylight, Shade, Cloudy,
Fluorescent ( D : Daylight Color, N : Daylight White,
W : Cool White, L : Warm White), Tungsten, n ,
Manual White Balance (up to 3 settings), Color
Temperature (up to 3 settings), Copying the white balance settings of a captured image
Auto Select, Bright, Natural, Portrait, Landscape,
Vibrant, Radiant, Muted, Flat, Bleach Bypass,
Reversal Film, Monotone, Cross Processing
Cross Processing Random, Preset 1 to 3, Favorite 1 to 3
Digital Filter
Extract Color, Replace Color, Retro, High Contrast,
Invert Color, Unicolor Bold, Bold Monochrome
Playback Functions
Playback View
Delete
Digital Filter
RAW
Development
Single image, Multi-image display (20, 48, and 70 thumbnails), Image magnification (Up to 16×, 100% display, Quick Zoom, and Focus Magnification), Grid
(4×4 Grid, Golden Section, Scale, Square (L),
Square (S), Grid Color: Black, Gray, White), Rotated image display, Histogram display (Y histogram, RGB histogram), Highlight Alert display, Auto image rotation, Detailed information display, Copyright
Information display (Photographer, Copyright
Holder), GPS information (Latitude, Longitude,
Altitude, Coordinated Universal Time (UTC)),
Direction, Folder display, Shooting date display
Single image, All images, Selected images, Folder,
Images on the selected shooting date, Instant
Review image
Base Parameter Adj, Extract Color, Replace Color,
Toy Camera, Retro, High Contrast, Shading, Invert
Color, Unicolor Bold, Tone Expansion, Bold
Monochrome, Grainy Monochrome, Miniature, Soft,
Fish-eye, Slim, Monotone, Frame Composite
Development options: Single image, Multiple images,
Folder, Images on the selected shooting date
Development parameters: White Balance, Custom
Image, Sensitivity, Digital Filter, Clarity, Skin Tone, HDR
Capture, Pixel Shift Resolution, Distortion Correction,
Peripheral Illumination Correction, Lateral Chromatic
Aberration Adjustment, Diffraction Correction, Color
Fringe Correction, High-ISO Noise Reduction, Shadow
Correction, File Format (JPEG, TIFF), JPEG Recorded
Pixels, JPEG Quality, Aspect Ratio, Color Space
128
Editing Features
Protect, Image Rotation, Image Copy, File Transfer,
Save RAW Data, Resize, Cropping (aspect ratio can be changed and tilt correction is available), Levels
Adjustment, White Balance Adjustment, Color Moiré
Correction, Extract Movie, Divide Movie, Save Movie
Frame as Image
Customization
Customizable
Items
Language
Power Supply
Battery Type
AC Adapter
Battery Life
Rechargeable Lithium-ion Battery D-LI90
AC Adapter Kit K-AC166 (optional)
Number of recordable images: Approx. 800 images
Playback time: Approx. 250 minutes
• Tested in compliance with CIPA standard using a fully charged lithium-ion battery at a temperature of 23°C (73°F). Actual results may vary depending on the shooting conditions/circumstances.
Interfaces
Connection Port
USB Connection
USB terminal (USB Type-C), Cable release terminal
(2.5 mm dia.), X-sync socket, HDMI
®
terminal (Type
D), Microphone terminal, Headphone terminal
USB 3.2 Gen 1
Data transfer: MTP, CD-ROM
Battery recharge, Power supply to the camera (when the dedicated AC adapter is used)
Wireless LAN
Standards
Frequency
(Center
Frequency)
User Mode, Fx Button, AF/AE Lock Settings,
Preview Dial, E-Dial Programming, Smart Function,
Touch Panel, Eye Sensor, Viewfinder Display, LCD
Panel, Monitor Display, Instant Review, Zoom
Review, Warning Display, Control Panel, Memory,
EV Steps, ISO Sensitivity Steps, Color Temperature
Steps, Focal Length Input, Save Rotation
Information, Aperture Information Record, AF Fine
Adjustment, Copyright Information
21 languages: Japanese, English, French, German,
Spanish, Portuguese, Italian, Dutch, Danish,
Swedish, Finnish, Polish, Czech, Hungarian,
Turkish, Greek, Russian, Thai, Korean, Traditional
Chinese, Simplified Chinese
IEEE 802.11b/g/n (standard wireless LAN protocol)
2412 to 2462 MHz (channels: Ch 1 to Ch 11)
Security
Authentication: WPA2
Encryption: AES
Bluetooth
®
Standards
Frequency
(Center
Frequency)
Bluetooth
®
v4.2 (Bluetooth Low Energy)
2402 to 2480 MHz (channels: Ch 0 to Ch 39)
Dimensions and Weight
Dimensions
Weight
Approx. 134.5 mm (W) × 103.5 mm (H) × 73.5 mm
(D) (5.3 in. (W) × 4.1 in. (H) × 2.9 in. (D)) (excluding protrusions)
Approx. 820 g (28.9 oz) (including the dedicated battery and an SD Memory Card)
Approx. 735 g (25.9 oz) (body only)
Operating Environment
Temperature
Humidity
-10 to 40°C (14 to 104°F)
85% or less (no condensation)
Included Accessories
Package
Contents
Software
Strap O-ST162, ME Viewfinder Cap, Rechargeable
Lithium-ion Battery D-LI90, USB Power Adapter,
Power Plug, USB Cable I-USB166
<Mounted to the camera> Eyecup F
U
, Hot shoe cover F
K
, Sync socket 2P cap, Body mount cap KII,
Battery grip terminal cover
Digital Camera Utility 5
7
USB Power Adapter AC-U1/AC-U2
Power Supply
Output
Average Active
Efficiency
No-Load Power
Consumption
Temperature
Dimensions
Weight
100 to 240 VAC (50/60 Hz), 0.2 A
5.0 VDC, 1000 mA, 5.0 W
76.8%
50 mW
10 to 40°C (50 to 104°F)
42.5 mm (W) × 22 mm (H) × 66.5 mm (D) (1.7 in. (W)
× 0.9 in. (H) × 2.6 in. (D)) (excluding the power plug)
Approx. 40 g (1.4 oz) (excluding the power plug)
129
7
Approximate Image Storage Capacity and
Playback Time
(When using the fully charged battery)
Battery
D-LI90
Temperature
23°C (73°F)
Normal Shooting Playback Time
800 250 minutes
• The image storage capacity (normal recording) is based on measuring conditions in accordance with CIPA standards, while other data is based on our measuring conditions. Some deviation from the above figures may occur in actual use depending on the selected capture mode and shooting conditions.
Approximate Image Storage Capacity by Size
(When using an 8 GB memory card)
Recorded Pixels q 26M p 15M o 9M r 2M m
495
837
1401
4717
JPEG Quality l
1120
1872
3105
9812 k
2190
3607
5840
16353
RAW
141
—
—
—
• The number of storable images may vary depending on the subject, shooting conditions, selected capture mode, memory card, etc.
Operating Environment for USB Connection and Provided Software
We recommend the following system requirements to connect the camera to a computer and to use the software.
Windows
®
OS
CPU
RAM
Windows
Windows
®
®
10 (FCU, CU) (32-bit, 64-bit) or
8.1 (32-bit, 64-bit)
Intel ® Core™ i5 or higher
8 GB or more
HDD
For installing and starting up the program:
Approx. 100 MB or more of available space
For saving image files: Approx. 15 MB/file (JPEG),
Approx. 50 MB/file (RAW)
Monitor 1280 × 1024 dots, 24-bit full color or higher
Mac
OS
CPU macOS 11.0 Big Sur, macOS 10.15 Catalina, macOS 10.14 Mojave, macOS 10.13 High Sierra, or macOS 10.12 Sierra
Intel ® Core™ i5 or higher
RAM
HDD
8 GB or more
For installing and starting up the program:
Approx. 100 MB or more of available space
For saving image files: Approx. 15 MB/file (JPEG),
Approx. 50 MB/file (RAW)
Monitor 1280 × 1024 dots, 24-bit full color or higher t
Memo
• Application software that supports the MOV format is required to play back movie files transferred to a computer.
130
Index
Symbols
A menus........................ 22
B menus........................ 25
C menus........................ 27
E menus ......................... 28
D menus......................... 34
B mode.......................... 54
A / K / B dial ................. 44
Numerics
1× image display ............. 47
........................................ 61
A
AC Adapter ...................... 41
Shooting .......................... 61
Action When AF Fails ...... 61
AdobeRGB ...................... 48
Advanced mode .............. 53
AE Metering..................... 59
AF Active Area (contrast detection autofocus) ........ 63
AF Active Area (phasematching detection autofocus)........................ 60
AF Area Restriction ......... 61
AF Assist Light ............ 9, 60
AF coupler ......................... 9
AF Fine Adjustment......... 64
AF Frame .................. 45, 46
AF Mode.......................... 60
AF point ........................... 61
AF point selector lever..... 61
........................................ 62
AF with Live View ............ 62
AF with Viewfinder........... 60
AF.S Setting .................... 61
.......................... 45, 59, 104
Anti-Aliasing Filter Simulator
........................................ 82
Aperture Priority AE......... 50
Aperture value ................. 50
Aspect Ratio .............. 92, 94
Source ............................. 75
Auto Area (contrast detection autofocus)........................ 63
Auto Area (phase-matching detection autofocus) ........ 60
Auto Display Rotation .... 108
.................................. 23, 51
Auto Flash Discharge ...... 77
Auto Image Rotation........ 85
Auto Power Off ................ 42
........................................ 78
........................................ 83
Balance) .......................... 74
Tungsten Light................. 75
Autofocus ........................ 59
J bracketing ................. 68
AV device ........................ 87
J mode......................... 50
B
M mode ........................... 53
(Digital Filter) ................... 91
Battery ............................. 38
Battery grip ...................... 39
Battery grip contacts.......... 9
.................................. 39, 40
Image) ............................. 78
Bluetooth ® ....................... 99
Filter) ......................... 79, 91
Bracketing ....................... 67
Bracketing Order ............. 67
.................................. 13, 80
Bulb ................................. 53
Bulb exposure ........... 50, 53
Button .............................. 10
C
Cable switch terminal ........ 9
Calibration ..................... 121
Capture mode.................. 49
Card................................. 41
Card access lamp.............. 9
Card Slot Sequence ........ 48
Catch-in Focus ................ 62
CD-ROM.......................... 97
........................................ 59
Changing display ............. 14
........................................ 93
Charging the battery ........ 39
Charging time .................. 40
Clarity .............................. 83
Cleaning ........................ 124
Color Fringe Correction ... 92
Color Moiré Correction .... 95
Color Settings .......... 43, 108
Color Space..................... 48
Balance) .......................... 76
........................................ 76
Computer......................... 97
Continuous AF................. 60
Continuous Shooting ....... 67
Release Options .............. 64
.................................. 59, 62
Control Panel..... 13, 20, 106
Copyright Holder............ 114
Copyright Information .... 114
Correcting images ........... 80
Create New Folder ........ 111
Crop................................. 48
Cropping .......................... 94
Image) ............................. 78
CTE ................................. 74
Custom Image ................. 78
Customization................ 102
7
131
7
132
D
Date Adjustment.............. 43
........................................ 74
Delete ........................ 47, 88
Delete All Images ............ 88
........................................ 86
Depth of field ................... 65
........................................ 68
........................................ 15
........................................ 92
Dial .................................. 10
Dial indicator.................... 44
Diffraction Correction....... 81
.................................. 93, 98
Digital Filter ............... 79, 91
Digital Preview................. 65
Diopter adjustment dial.... 17
Direct keys....................... 18
Distortion Correction........ 81
Divide Movie.................... 96
DNG ................................ 48
Drive mode ...................... 66
Dust Removal ................ 123
Dynamic range ................ 80
........................................ 80
E
Editing images ................. 91
Electronic level ................ 18
.............................. 107, 108
Error messages ............. 125
EV Compensation ........... 54
EV Steps ......................... 51
Exif data ........................ 114
Expanded Area AF (phasematching detection autofocus)........................ 60
...................................... 101
Exposure mode ............... 50
View................................. 51
External flash................. 119
Extract Color (Digital Filter)
.................................. 79, 91
Extract Movie................... 96
Eye Sensor .............. 17, 107
F
Face Detection ................ 64
Face Priority AE .............. 59
File Format ...................... 48
File Name ...................... 113
File Transfer .................... 90
Filter .......................... 79, 91
Firmware Info/Options ..... 36
Fish-eye (Digital Filter) .... 91
Flash........................ 77, 119
Flash compensation ........ 77
Flash Mode...................... 77
Flash On.......................... 77
Flash X-sync Speed ........ 50
Flat (Custom Image)........ 78
Flicker Reduction........... 108
(White Balance)............... 74
(White Balance)............... 74
(White Balance)............... 74
(White Balance)............... 74
Focal length input .......... 119
Focus Magnification ...... 109
Focus method.................. 59
.................................. 44, 59
Focus Peaking................. 64
Folder display .................. 87
Folder Name.................. 112
Format ............................. 43
Four-way controller.... 11, 18
Filter) ............................... 91
Framerate ........................ 49
Fx Button ....................... 102
G
GPS............................... 121
GPS Settings ................. 121
Filter) ......................... 79, 91
Grid Guide ..................... 108
H
HDR Capture ................... 81
Headphone ...................... 56
High Contrast (Digital Filter)
.................................. 79, 91
........................................ 58
Highlight Correction ......... 80
........................................ 59
Hold AF Status ................ 61
Hot shoe .......................... 77
Hyper manual .................. 52
Hyper program ................ 52
I
Image Copy ..................... 90
Image finishing tone ........ 78
Image plane indicator ........ 9
...................................... 130
Image Sync...................... 99
Indicator Lamps ............. 110
Field of View ............ 17, 107
Initial settings................... 42
Instant Review ......... 45, 109
Interval Composite........... 72
Interval Shooting.............. 71
.................................. 79, 91
ISO Auto Lower Limit....... 57
ISO Auto Upper Limit....... 57
Shutter Speed.................. 57
ISO sensitivity.................. 57
ISO Sensitivity Setting ..... 57
ISO Sensitivity Steps ....... 57
J
JPEG ............................... 48
JPEG Quality ................... 48
K
Kelvin............................... 76
L
........................................ 78
Language setting ............. 43
Language/ W ................ 42
Adjustment....................... 81
LCD Panel ............... 16, 108
...................................... 119
Lens......................... 37, 116
Lens Correction ............... 81
Lens focal length ........... 119
.......................................... 9
Lens mount index ........ 9, 37
Lens unlock button .......... 37
Levels Adjustment ........... 94
Lever ............................... 10
Point ................................ 59
Live View ................. 12, 108
Low-pass filter ................. 82
M
L mode .......................... 50
Mac................................ 130
............................ 45, 46, 47
Manual Exposure ............ 50
Manual focus ................... 59
ME viewfinder cap ........... 73
Memory ......................... 111
Memory card ................... 41
Menu ............................... 20
Microphone.................. 9, 56
Miniature (Digital Filter) ... 91
Options ............................ 57
Mired ............................... 76
Mirror ................................. 9
Mirror Up ......................... 69
Mode dial ......................... 44
Mode dial lock button ...... 44
........................................ 45
Moiré reduction................ 82
Monitor ............................ 12
................................ 13, 109
Monitor Display.............. 108
........................................ 15
........................................ 78
Monotone (Digital Filter) .. 91
Motion Bracketing............ 69
Mount names................. 117
Movie Edit........................ 96
Movie mode ..................... 54
Movie Mode AF ............... 64
Movie setting menus ....... 25
Movie Touch AF .............. 55
MTP................................. 97
(White Balance)............... 74
Multi-exposure ................. 70
Multi-image display.......... 85
N
Night Vision Display ........ 13
Noise Reduction ........ 52, 58
O
........................................ 54
One Push ISO Auto ......... 57
Optical Preview ............... 65
................................ 13, 122
P
G mode .......................... 50
PEF ................................. 48
Correction ........................ 81
Phase-matching detection autofocus ......................... 59
Photographer................. 114
Pixel Mapping ................ 123
Pixel Shift Resolution ...... 82
Playback card ............ 47, 85
Playback function selection screen.............................. 85
................................ 14, 108
Playback mode ................ 47
.................................. 56, 85
Power .............................. 42
Preview............................ 65
Preview Method............... 65
Processing images .......... 91
Program AE ..................... 50
Program Line ................... 52
Protect ............................. 89
Provided software.......... 130
Q
Quality ............................. 48
Quality level adjustment .. 82
Quick Zoom ............. 47, 109
R
........................................ 78
RAW ................................ 48
RAW File Format ............. 48
...................................... 101
Recorded Pixels ........ 48, 49
Red-eye reduction ........... 77
........................................ 83
Remote Control ............... 73
Remote control receiver .... 9
Replace Color (Digital Filter)
.................................. 79, 91
Reset ............................... 21
Reset Numbering........... 113
...................................... 100
Reseting the menu .......... 21
Resize.............................. 93
Retractable lens............... 46
Retro (Digital Filter) ... 79, 91
Image) ............................. 78
Rotating images............... 89
Rotation Direction .......... 105
S
Balance............................ 76
Save Rotation Info ........... 89
7
133
7
134
...................................... 100
........................................ 44
SD Memory Card............. 41
Select (contrast detection autofocus)........................ 63
Select (phase-matching detection autofocus) ........ 60
Self-timer ......................... 73
Self-timer lamp .................. 9
Sensitivity .................. 57, 92
Sensitivity Priority AE ...... 50
Sensor Cleaning............ 124
Setup menus ................... 34
.................................. 79, 91
Shadow Correction .......... 80
Shake Reduction ............. 83
........................................ 78
Shooting .......................... 44
...................................... 121
Shooting date display ...... 87
Shooting Info Display .... 108
AE.................................... 50
Shutter Priority AE........... 50
Shutter speed .................. 50
Single AF ......................... 60
.................................. 14, 47
Skin Tone ........................ 83
Slim (Digital Filter) ........... 91
Reduction ........................ 52
Slow-speed Sync............. 77
Smart Function ........ 19, 106
Soft (Digital Filter)............ 91
Sound .............................. 54
Sound Effects ................ 110
Speaker ............................. 9
Specifications ................ 126
Spot (contrast detection autofocus)........................ 63
Spot (phase-matching detection autofocus) ........ 61
Spot metering .................. 59
sRGB............................... 48
Status screen .......... 12, 108
........................................ 22
Still image/Live View/Movie selector dial ..................... 44
Store Cursor Position ...... 21
Strap ................................ 37
Subject Recognition ........ 62
Supplying power .............. 40
H mode ........................ 50
Sync socket 2P cap ....... 120
T
K mode ........................ 50
Tethered shooting ........... 98
Text entry ...................... 100
Texture adjustment.......... 82
Thumbnail display ..... 47, 85
TIFF ................................. 92
Time ................................ 53
Timed exposure............... 53
Filter) ......................... 79, 91
........................................ 85
.................................. 79, 91
Tracking (contrast detection autofocus)........................ 63
Tripod socket ..................... 9
........................................ 74
I bracketing ................. 69
I mode......................... 50
U
Unicolor Bold (Digital Filter)
.................................. 79, 91
External Device ............... 40
USB Setting ..................... 97
USB terminal ............. 39, 97
User registration ................ 7
...................................... 101
Using Aperture Ring ...... 118
V
Vertical position ............... 13
Viewfinder........................ 16
Viewfinder Light ............. 107
Viewfinder Screen ......... 107
Volume ............................ 35
Volume label.................... 43
W
Warning Display ............ 110
White Balance ................. 74
........................................ 95
Windows ® ...................... 130
Wireless LAN................... 99
X
N mode .......................... 50
................................ 50, 120
X-sync socket ................ 120
Z
Zone Select (contrast detection autofocus) ........ 63
Zone Select (phase-matching detection autofocus) ........ 60
Zoom Review................. 109
Care to be Taken During Handling
Before Using Your Camera
• When the camera has not been used for a long time, confirm that it is still working properly, particularly prior to taking important images (such as at a wedding or when traveling). Contents of the recording cannot be guaranteed if recording, playback, or transferring your data to a computer, etc. is not possible due to a malfunction of your camera or recording media (memory cards), etc.
About the Battery and Charger
• To keep the battery in optimum condition, avoid storing it in a fully charged state or in high temperatures.
• If the battery is left inserted and the camera is not used for a long time, the battery will over-discharge and shorten the battery’s life.
• Charging the battery a day before use or on the day of use is recommended.
Precautions on Carrying and Using Your Camera
• Do not subject the camera to high temperatures or high humidity. Do not leave the camera in a vehicle, as the temperature can get very high.
• Do not subject the camera to strong vibrations, shocks, or pressure. Use a cushion to protect the camera from vibrations of motorcycles, automobiles, or ships.
• The temperature range for camera use is -10°C to 40°C (14°F to 104°F).
• The monitor may appear black at high temperatures, but will return to normal at normal temperatures.
• The monitor may respond more slowly at low temperatures. This is due to liquid crystal properties, and is not a malfunction.
• Sudden temperature changes will cause condensation on the inside and outside of the camera. Place the camera in your bag or a plastic bag, and remove it after temperatures of the camera and surroundings are equalized.
• Avoid contact with garbage, mud, sand, dust, water, toxic gases, or salt.
These could cause the camera to breakdown. Wipe the camera to dry off any rain or water drops.
• Do not press on the monitor with excessive force. This could cause it to break or malfunction.
• Be careful not to overtighten the screw in the tripod socket when using a tripod.
Cleaning Your Camera
• Do not clean the camera with organic solvents such as thinner, alcohol, and benzine.
• Use a lens brush to remove dust accumulated on a lens. Never use a spray blower for cleaning as it may damage the lens.
• Please contact your nearest service center for professional cleaning of the CMOS sensor. (This will involve a fee.)
• Periodic inspections are recommended every one to two years to maintain high performance.
Storing Your Camera
• Do not store the camera with preservatives or chemicals. Storage in high temperatures and high humidity can cause mold to grow on the camera.
Remove the camera from its case and store it in a dry and well-ventilated place.
• Avoid using or storing the camera where it may be exposed to static electricity or electrical interference.
• Avoid using or storing the camera in direct sunlight or in locations where it may be exposed to rapid changes in temperature or to condensation.
About SD Memory Cards
• The SD Memory Card is equipped with a write-protect switch. Setting the switch to
LOCK prevents new data from being recorded on the card, the stored data from being deleted, and the card from being formatted by the camera or
Write-protect switch computer.
• The SD Memory Card may be hot when removing the card immediately after using the camera.
• Do not remove the SD Memory Card or turn off the power while the card is being accessed. This may cause the data to be lost or the card to be damaged.
• Do not bend the SD Memory Card or subject it to violent impact. Keep it away from water and store away from high temperatures.
• Do not remove the SD Memory Card while formatting. The card may be damaged and become unusable.
• Data on the SD Memory Card may be deleted in the following circumstances. We do not accept any liability for data that is deleted if
1. the SD Memory Card is mishandled by the user;
2. the SD Memory Card is exposed to static electricity or electrical interference;
3. the SD Memory Card has not been used for a long time;
7
135
7
4. the SD Memory Card or the battery is removed while the card is being accessed.
• If the SD Memory Card is not used for a long time, the data on the card may become unreadable. Be sure to regularly make a backup of important data on a computer.
• Format new SD Memory Cards. Also format SD Memory Cards previously used with other cameras.
• Please note that deleting data stored on an SD Memory Card, or formatting an SD Memory Card does not completely erase the original data. Deleted data can sometimes be recovered using commercially available software. If you are going to discard, give away, or sell your SD
Memory Card, you should ensure that the data on the card is completely deleted or the card itself is destroyed if it contains any personal or sensitive information.
• The data on your SD Memory Card should be managed at your own risk.
Trademarks
• Microsoft and Windows are registered trademarks of Microsoft
Corporation in the United States of America and other countries.
• Mac and macOS are trademarks of Apple Inc., registered in the U.S. and other countries.
• IOS is a trademark or registered trademark of Cisco in the U.S. and other countries and is used under license.
• Intel and Intel Core are trademarks of Intel Corporation in the U.S. and/ or other countries.
• SDXC Logo is a trademark of SD-3C, LLC.
• The Bluetooth word mark and logos are registered trademarks owned by
Bluetooth SIG, Inc., and any use of such marks by Ricoh Company, Ltd. is under license.
• USB Type-C is a trademark of USB Implementers Forum.
• This product includes DNG technology under license by Adobe Systems
Incorporated.
• The DNG logo is either a registered trademark or trademark of Adobe
Systems Incorporated in the United States and/or other countries.
• HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing, LLC in the
United States and/or other countries.
All other trademarks are the property of their respective owners.
• This product uses the RICOH RT font designed by Ricoh Company Ltd.
• This product supports PRINT Image Matching III. PRINT Image
Matching-enabled digital still cameras, printers, and software help photographers to produce images more faithful to their intentions. Some functions are not available on printers that are not PRINT Image
Matching III compliant.
Copyright 2001 Seiko Epson Corporation. All Rights Reserved. PRINT
Image Matching is a trademark of Seiko Epson Corporation. The PRINT
Image Matching logo is a trademark of Seiko Epson Corporation.
136
AVC Patent Portfolio License
This product is licensed under the AVC Patent Portfolio License for the personal use of a consumer or other uses in which it does not receive remuneration to (i) encode video in compliance with the AVC standard
(“AVC video”) and/or (ii) decode AVC video that was encoded by a consumer engaged in a personal activity and/or was obtained from a video provider licensed to provide AVC video. No license is granted or shall be implied for any other use.
Additional information may be obtained from MPEG LA, L.L.C.
See http://www.mpegla.com.
Announcement about the Open Source Software
This camera includes the open source software (OSS) licensed under the
GNU General Public License (GPL), GNU Lesser General Public License
(LGPL), and/or other licenses. The information about licenses of each
OSS used in the camera is saved in the camera internal memory as a text file. Connect the camera to a computer, access the “oss_license” folder, and open each text file to read the license terms.
The source codes of OSS used in the camera are disclosed under the license terms of GPL, LGPL, etc. If you need the source codes, access the following URL.
http://www.ricoh-imaging.co.jp/english/products/oss/
Announcement on the Use of BSD-Licensed Software
This product includes software licensed under the BSD License. BSD license is a form of license which permits the redistribution of the software provided that it is clearly stated that use is unwarranted, and a copyright notice and a list of licensing conditions are provided. The following contents are displayed based on the abovementioned licensing conditions and are not for the purpose of restricting your use of the product, etc.
Tera Term
Copyright (C) 1994-1998 T. Teranishi
(C) 2004-2018 TeraTerm Project
All rights reserved.
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:
1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
3. The name of the author may not be used to endorse or promote products derived from this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE AUTHOR “AS IS” AND ANY
EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT,
INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER
IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
OF SUCH DAMAGE.
7
137
7
138
WARRANTY POLICY
All our cameras purchased through authorized bona fide photographic distribution channels are guaranteed against defects of material or workmanship for a period of twelve months from the date of your purchase. Service will be rendered, and defective parts will be replaced without cost to you within that period, provided the camera does not show evidence of impact, sand or liquid damage, mishandling, tampering, battery or chemical corrosion, operation contrary to operating instructions, or modification by an unauthorized repair shop. The manufacturer or its authorized representatives shall not be liable for any repair or alterations except those made with its written consent and shall not be liable for damages from delay or loss of use or from other indirect or consequential damages of any kind, whether caused by defective material or workmanship or otherwise; and it is expressly agreed that the liability of the manufacturer or its representatives under all guarantees or warranties, whether expressed or implied, is strictly limited to the replacement of parts as hereinbefore provided. No refunds will be made on repairs by non-authorized service facilities.
Procedure During 12-month Warranty Period
Any camera which proves defective during the 12-month warranty period should be returned to the dealer from whom you purchased the camera or to the manufacturer. If there are no representatives of the manufacturer in your country, send the camera to the manufacturer, with postage prepaid. In this case, it will take a considerable length of time before the camera can be returned to you owing to the complicated customs procedures required. If the camera is covered by warranty, repairs will be made and parts replaced free of charge, and the camera will be returned to you upon completion of servicing. If the camera is not covered by warranty, regular charges of the manufacturer or of its representatives will apply. Shipping charges are to be borne by the owner. If your camera was purchased outside of the country where you wish to have it serviced during the warranty period, regular handling and servicing fees may be charged by the manufacturer’s representatives in that country. Notwithstanding this, your camera returned to the manufacturer will be serviced free of charge according to this procedure and warranty policy. In any case, however, shipping charges and customs clearance fees to be borne by the sender. To prove the date of your purchase when required, please keep the receipt or bills covering the purchase of your camera for at least a year. Before sending your camera for servicing, please make sure that you are sending it to the manufacturer’s authorized representatives or their approved repair shops, unless you are sending it directly to the manufacturer. Always obtain a quotation for the service charge, and only after you accept the quoted service charge, instruct the service station to proceed with the servicing.
• This warranty policy does not affect the customer’s statutory rights.
• The local warranty policies available from our distributors in some countries can supersede this warranty policy. Therefore, we recommend that you review the warranty card supplied with your product at the time of purchase, or contact our distributor in your country for more information and to receive a copy of the warranty policy.
For Customers in USA
STATEMENT OF FCC COMPLIANCE
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
FCC CAUTION:
Changes or modifications not approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
The available scientific evidence does not show that any health problems are associated with using low power wireless devices.
There is no proof, however, that these low power wireless devices are absolutely safe. Low power Wireless devices emit low levels of radio frequency energy (RF) in the microwave range while being used. Whereas high levels of RF can produce health effects (by heating tissue), exposure of low-level RF that does not produce heating effects causes no known adverse health effects. Many studies of low-level RF exposures have not found any biological effects. Some studies have suggested that some biological effects might occur, but such findings have not been confirmed by additional research. R03010 has been tested and found to comply with FCC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines.
According to 47CFR, Parts 2 and 15 for
Class B Personal Computers and Peripherals
We:
Located at:
Declaration of Conformity
RICOH IMAGING AMERICAS
CORPORATION
2 Gatehall Drive Suite 204,
Parsippany, New Jersey 07054,
U.S.A.
Phone: 800-877-0155
Declare under sole responsibility that the product identified herein complies with 47CFR Parts 2 and 15 of the FCC rules as a Class B digital device. Each product marketed is identical to the representative unit tested and found to be compliant with the standards. Records maintained continue to reflect the equipment being produced can be expected to be within the variation accepted, due to quantity production and testing on the statistical basis as required by 47CFR §2.909. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. The above named party is responsible for ensuring that the equipment complies with the standards of 47CFR §15.101 to §15.109.
Product Name: Digital Camera
Model Number: R03010
Contact Person: Customer Service Manager
Date and Place: September, 2020 Parsippany
7
139
7
For Customers in Canada
Innovation, Science and Economic Development Canada
(ISED) Regulatory Compliance Notice
This Class B digital apparatus complies with Canadian ICES-
003 (B).
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic
Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:
1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.
The available scientific evidence does not show that any health problems are associated with using low power wireless devices.
There is no proof, however, that these low power wireless devices are absolutely safe. Low power wireless devices emit low levels of radio frequency energy (RF) in the microwave range while being used. Whereas high levels of RF can produce health effects (by heating tissue), exposure of low-level RF that does not produce heating effects causes no known adverse health effects. Many studies of low-level RF exposures have not found any biological effects. Some studies have suggested that some biological effects might occur, but such findings have not been confirmed by additional research. The R03010 has been tested and found to comply with ISED radiation exposure limits set forth for an uncontrolled environment and meets RSS-102 of the ISED radio frequency (RF) Exposure rules.
Pour les utilisateurs au Canada
Avis de conformité à la réglementation d’Innovation,
Sciences et Développement économique Canada (ISDE)
Cet appareil numérique de la classe B est conforme à la norme
NMB-003 (B) du Canada.
L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes :
1. L’appareil ne doit pas produire de brouillage ;
2. L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.
Les connaissances scientifiques dont nous disposons n’ont mis en évidence aucun problème de santé associé à l’usage des appareils sans fil à faible puissance. Nous ne sommes cependant pas en mesure de prouver que ces appareils sans fil
à faible puissance sont entièrement sans danger. Les appareils sans fil à faible puissance émettent une énergie fréquence radioélectrique (RF) très faible dans le spectre des micro-ondes lorsqu’ils sont utilisés. Alors qu’une dose élevée de RF peut avoir des effets sur la santé (en chauffant les tissus), l’exposition à de faibles RF qui ne produisent pas de chaleur n’a pas de mauvais effets connus sur la santé. De nombreuses
études ont été menées sur les expositions aux RF faibles et n’ont découvert aucun effet biologique. Certaines études ont suggéré qu’il pouvait y avoir certains effets biologiques, mais ces résultats n’ont pas été confirmés par des recherches supplémentaires. Le R03010 a été testé et jugé conforme aux limites d’exposition aux rayonnements ISDE énoncées pour un environnement non contrôlé et respecte les règles d’exposition aux fréquences radioélectriques (RF) CNR-102 de l’ISDE.
140
For Customers in Europe
Information for Users on Collection and Disposal of Old
Equipment and Used Batteries
1. In the European Union
These symbols on the products, packaging and/ or accompanying documents mean that used electrical and electronic equipment and batteries should not be mixed with general household waste.
Used electrical/electronic equipment and batteries must be treated separately and in accordance with legislation that requires proper treatment, recovery and recycling of these products.
By disposing of these products correctly you will help ensure that the waste undergoes the necessary treatment, recovery and recycling and thus prevent potential negative effects on the environment and human health which could otherwise arise due to inappropriate waste handling.
If a chemical symbol is added beneath the symbol shown above, in accordance with the Battery Directive, this indicates that a heavy metal (Hg = Mercury, Cd = Cadmium, Pb = Lead) is present in the battery at a concentration above an applicable threshold specified in the Battery Directive.
For more information about collection and recycling of used products, please contact your local authorities, your waste disposal service or the point of sale where you purchased the products.
2. In other countries outside the EU
These symbols are only valid in the European Union. If you wish to discard used products, please contact your local authorities or dealer and ask for the correct method of disposal.
For Switzerland: Used electrical/electronic equipment can be returned free of charge to the dealer, even when you don’t purchase a new product. Further collection facilities are listed on the home page of www.swico.ch or www.sens.ch.
CAUTION:
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN
INCORRECT TYPE. DISPOSE OF USED BATTERIES
ACCORDING TO THE INSTRUCTIONS.
Notice to Users in EEA Countries
This product complies with the essential requirements and provisions of RE Directive 2014/53/EU.
The CE Declaration of Conformity is available by accessing the
URL: http://www.ricoh-imaging.co.jp/english/support/ declaration_of_conformity.html
and selecting the product applicable.
Operating frequency band: 2400 MHz - 2483.5 MHz
Maximum radio-frequency power: 14 dBm EIRP
European importer: RICOH IMAGING EUROPE S.A.S.
Parc Tertiaire SILIC 7-9, avenue Robert Schuman - B.P. 70102,
94513 Rungis Cedex, FRANCE
Manufacturer: RICOH IMAGING COMPANY, LTD.
1-3-6, Nakamagome, Ohta-ku, Tokyo 143-8555, JAPAN
7
141
Notice to Users in CE marking
Importer (CE marking): RICOH IMAGING EUROPE S.A.S.
Parc Tertiaire SILIC 7-9, avenue Robert Schuman - B.P. 70102,
94513 Rungis Cedex, FRANCE
Manufacturer: RICOH IMAGING COMPANY, LTD.
3-6, Nakamagome 1-chome, Ohta-ku, Tokyo, 143-8555 Japan
The CE Mark is a Directive conformity mark of the
European Union.
Notice to Users in UKCA marking
Manufacturer: RICOH IMAGING COMPANY, LTD.
3-6, Nakamagome 1-chome, Ohta-ku, Tokyo, 143-8555 Japan
The UKCA Mark is a Regulation conformity mark of the United Kingdom.
7
For Customers in Thai
This telecommunication equipment conforms to the requirements of the Office of the National Broadcasting and
Telecommunications Commission.
142
Memo
Memo
e_kb582_cover_6mm.fm Page 2 Thursday, December 10, 2020 1:19 PM
For Using Your Camera Safely
We have paid close attention to the safety of this camera. When using this camera, we request your special attention regarding items marked with the following symbols.
Warning
This symbol indicates that ignoring this item could cause serious personal injuries.
Caution
This symbol indicates that ignoring this item could cause minor or medium personal injuries, or loss of property.
About the Camera
Warning
• Do not disassemble or modify the camera. High voltage areas are present inside the camera, with the risk of electric shock.
• If the camera interior is exposed due to dropping or otherwise damaging the camera, never touch the exposed portion. There is a risk of electric shock.
• Do not aim the camera at the sun or other strong light sources when taking images or leave the camera sitting in direct sunlight with a lens cap off. Doing so may cause the camera to malfunction or cause a fire.
• Do not look at the sun or other strong light sources through a lens. Doing so may lead to a loss of eyesight or cause vision to be impaired.
• If any irregularities occur during use, such as smoke or a strange odor, stop use immediately, remove the battery or the AC adapter, and contact your nearest service center. Continued use can cause a fire or electric shock.
Caution
• Some portions of the camera heat up during use. There is a risk of low temperature burns when holding such portions for long periods.
• Should the monitor be damaged, be careful of glass fragments. Also, be careful not to allow the liquid crystal to get on your skin or in your eyes or mouth.
• Depending on your individual factors or physical condition, the use of the camera may cause itching, rashes or blisters. In case of any abnormality, stop using the camera and get medical attention immediately.
About the USB Power Adapter
Warning
• Wipe off the power plug if it should become covered with dust.
Accumulated dust may cause a fire.
• Do not handle the power plug with wet hands. This can cause an electric shock.
• Always grip the plug section when disconnecting the power plug. Do not pull the power cord. This can damage the power cord and result in a fire or electric shock.
• If the generation of smoke or strange odor from the adapter or other abnormality occurs, immediately remove the power plug from the outlet and contact your nearest dealer or service center for repair. Do not use the adapter until it is repaired.
• If you see a lightning flash or hear thunder during use of the adapter, do not touch the power plug. This can cause an electric shock.
Caution
• Securely insert the power plug into the outlet. Failure to observe this precaution may cause a fire.
e_kb582_cover_6mm.fm Page 1 Friday, March 5, 2021 1:46 PM
RICOH IMAGING COMPANY, LTD.
1-3-6, Nakamagome, Ohta-ku, Tokyo 143-8555, JAPAN
(http://www.ricoh-imaging.co.jp)
RICOH IMAGING EUROPE
S.A.S.
RICOH IMAGING AMERICAS
CORPORATION
Parc Tertiaire SILIC 7-9, avenue Robert Schuman - B.P. 70102,
94513 Rungis Cedex, FRANCE
(http://www.ricoh-imaging.eu)
2 Gatehall Drive Suite 204, Parsippany, New Jersey 07054, U.S.A.
(http://www.us.ricoh-imaging.com)
RICOH IMAGING CANADA
INC.
5560 Explorer Drive Suite 100, Mississauga, Ontario, L4W 5M3, CANADA
(http://www.ricoh-imaging.ca)
RICOH IMAGING CHINA CO.,
LTD.
Room A 23F Lansheng Building, 2-8 Huaihaizhong Road, Huangpu District,
Shanghai, 200021, CHINA
(http://www.ricoh-imaging.com.cn) http://www.ricoh-imaging.co.jp/english
This contact information may change without notice.
Please check the latest information on our websites.
• Specifications and external dimensions are subject to change without notice.
51553
*4RE2Z020*
Copyright © RICOH IMAGING COMPANY, LTD. 2021
R02DTC21 Printed in Philippines
SLR Digital Camera
Operating Manual
Introduction
Getting Started
Shooting
Playback
Sharing
Settings
Appendix
5
6
7
3
4
1
2
Model No. R03010
This Operating Manual provides information on how to use the shooting and playback functions of this camera and related precautions.
Thoroughly read this Operating Manual to make the best use of the functions available with this camera. Be sure to keep this
Operating Manual for future reference.
It is recommended to update the camera firmware to the latest version before using the camera.
For details on the latest firmware version, refer to the firmware download site.
http://www.ricoh-imaging.com/
RICOH IMAGING COMPANY, LTD.
다운로드
공개 링크 업데이트됨
문서 공개 링크
광고