Below you will find brief information for SLR Digital Camera K-S2. This manual provides comprehensive guidance on using the PENTAX K-S2, covering everything from basic operations to advanced features. It helps you set up your camera, capture stunning photos and videos, share your work, and customize settings. The manual includes sections on shooting modes, exposure settings, focus methods, and playback functions, along with troubleshooting tips and essential specifications.
Advertisement
Advertisement
http://www.ricoh-imaging.co.jp/english
Copyright © RICOH IMAGING COMPANY, LTD. 2014
R01DTL14 Printed in Japan
SLR Digital Camera
Hot shoe cover F
K
(Installed on camera)
Eyecup F
R
(Installed on camera)
Body mount cover
(Installed on camera)
Rechargeable Lithium-ion
Battery D-LI109
Battery charger
D-BC109
AC plug cord Strap
O-ST132
Software (CD-ROM)
S-SW156
Start Guide
Lenses you can use
Lenses that can be used with this camera are DA, DA L, D FA and FA J lenses and lenses that have an 9 (Auto) position on the
aperture ring. To use any other lens or accessory, see p.113.
1
1
............................p.7
Names and Functions of the Working Parts
.......................................................................p.7
How to Change Function Settings .............p.18
Menu List ......................................................p.21
2
2
........................................p.30
Attaching the Strap .....................................p.30
Attaching a Lens .........................................p.30
Using the Battery and Charger ..................p.31
Inserting a Memory Card ............................p.34
How to Open the Monitor ............................p.35
Initial Settings ..............................................p.36
Basic Shooting Operation ..........................p.39
Reviewing Images .......................................p.42
3
.......................................p.44
Configuring the Capture Settings ..............p.44
Taking Still Pictures ....................................p.45
Recording Movies .......................................p.49
Setting the Exposure ..................................p.51
Using the Built-in Flash ..............................p.53
Setting the Focus Method ..........................p.54
Setting the Drive Mode ...............................p.59
Setting the White Balance ..........................p.68
Controlling the Image Finishing Tone .......p.71
Correcting Images .......................................p.74
4
..............................p.77
Playback Mode Palette Items .....................p.77
Changing the Playback Method .................p.78
Connecting the Camera to a Computer .....p.82
Editing and Processing Images .................p.83
5
.......................................p.89
Enabling the Wi-Fi Function .......................p.89
Operating the Camera with a Communication
Device ...........................................................p.91
6
Camera Settings ..........................................p.100
File Management Settings ..........................p.106
7
....................................................p.110
Restrictions on Each Capture Mode ..........p.110
Functions Available with Various Lenses
.......................................................................p.113
Functions when Using an External Flash
.......................................................................p.116
Using the GPS Unit .....................................p.117
Troubleshooting ..........................................p.118
Main Specifications .....................................p.123
Index .............................................................p.130
For Using Your Camera Safely ...................p.135
Care to be Taken During Handling ............p.137
WARRANTY POLICY ...................................p.141
There is a possibility that the illustrations and the display screen of the monitor in this manual are different from the actual ones.
3
4
How to Use This Manual .........................2
Introducing the K-S2 ...............................7
Names and Functions of the Working Parts ......7
Operating Controls ......................................................... 8
Monitor ......................................................................... 10
Viewfinder .................................................................... 16
Electronic Level ........................................................... 17
How to Change Function Settings .................... 18
Using the Direct Keys .................................................. 18
Using the Control Panel ............................................... 18
Using the Menus .......................................................... 19
Menu List ............................................................. 21
Rec. Mode Menus ........................................................ 21
Movie Menu ................................................................. 25
Playback Menu ............................................................ 25
Set-up Menus .............................................................. 26
Custom Setting Menus ................................................ 28
Getting Started ......................................30
Attaching the Strap ............................................ 30
Attaching a Lens ................................................. 30
Using the Battery and Charger .......................... 31
Charging the Battery .................................................... 31
Inserting/Removing the Battery ................................... 32
Using the AC Adapter .................................................. 33
Inserting a Memory Card ...................................34
How to Open the Monitor ...................................35
Initial Settings ..................................................... 36
Turning the Camera On ............................................... 36
Setting the Display Language ...................................... 37
Setting the Date and Time ........................................... 37
Setting the LCD Display ............................................... 38
Formatting a Memory Card .......................................... 38
Basic Shooting Operation ................................. 39
Shooting with the Viewfinder ........................................ 39
Shooting While Viewing the Live View Image .............. 41
Reviewing Images ..............................................42
Taking Pictures .....................................44
Configuring the Capture Settings .....................44
Image Capture Settings ............................................... 44
Movie Capture Settings ................................................ 44
Taking Still Pictures ........................................... 45
Scene Modes ............................................................... 45
Advanced HDR Mode .................................................. 46
Exposure Modes .......................................................... 47
EV Compensation ........................................................ 48
Recording Movies ............................................... 49
Playing Back Movies .................................................... 51
Setting the Exposure ..........................................51
Sensitivity ..................................................................... 51
AE Metering ................................................................. 52
Using the Built-in Flash ..................................... 53
Setting the Focus Method .................................. 54
Setting the AF Mode when Shooting with the
Viewfinder .................................................................... 55
Setting the AF Mode during Live View ......................... 57
AF Fine Adjustment ..................................................... 58
Setting the Drive Mode ....................................... 59
Continuous Shooting ................................................... 60
Self-timer ..................................................................... 60
Remote Control ............................................................ 61
Bracketing .................................................................... 62
Multi-exposure ............................................................. 63
Interval Shooting .......................................................... 64
Interval Composite ....................................................... 65
Interval Movie Record .................................................. 66
Star Stream .................................................................. 67
Setting the White Balance .................................68
Adjusting the White Balance Manually ........................ 70
Adjusting the White Balance with Color
Temperature ................................................................ 70
Controlling the Image Finishing Tone ..............71
Custom Image ............................................................. 71
Digital Filter .................................................................. 73
Correcting Images ..............................................74
Brightness Adjustment ................................................. 74
Lens Correction ........................................................... 75
Anti-Aliasing Filter Simulator ........................................ 76
Texture Enhancement ................................................. 76
Playback Functions ..............................77
Playback Mode Palette Items ............................ 77
Changing the Playback Method ........................ 78
Displaying Multiple Images .......................................... 78
Displaying Images by Folder ....................................... 79
Displaying Images by Shooting Date ........................... 79
Playing Back Images Continuously (Slideshow) .......... 80
Displaying Rotated Images .......................................... 80
Connecting the Camera to an AV Device .................... 81
Connecting the Camera to a Computer ............ 82
Editing and Processing Images ........................ 83
Changing the Image Size ............................................. 83
Correcting Color Moiré ................................................. 84
Processing Images with Digital Filters ......................... 84
Editing Movies .............................................................. 86
Developing RAW Images ............................................. 87
Sharing Images .....................................89
Enabling the Wi-Fi Function .............................. 89
Setting from the Menus ................................................ 89
Pressing the Self-portrait Shutter Button ..................... 90
Touching a Communication Device ............................. 90
Operating the Camera with a Communication
Device .................................................................. 91
Connecting the Camera and Communication Device ....91
Screens of “Image Sync” ............................................. 93
Shooting with a Communication Device ...................... 94
Viewing Images ............................................................ 95
Changing the Settings .................................................. 98
Changing the Settings ........................100
Camera Settings ............................................... 100
Customizing the Button/E-dial Functions ................... 100
Saving Frequently Used Settings ............................... 103
Displaying the Local Date and Time of the Specified
City ............................................................................. 105
Selecting Settings to Save in the Camera ................. 105
File Management Settings ............................... 106
Protecting Images from Deletion (Protect) ................. 106
Selecting the Folder/File Settings .............................. 106
Setting the Copyright Information .............................. 109
5
6
Appendix ..............................................110
Restrictions on Each Capture Mode ............... 110
Restrictions on the Combinations of Special
Functions ................................................................... 112
Functions Available with Various Lenses ......113
Using the Aperture Ring ............................................ 115
Setting the Focal Length ............................................ 116
Functions when Using an External Flash ......116
Using the GPS Unit ........................................... 117
Shooting Celestial Bodies (ASTROTRACER) ........... 118
Troubleshooting ............................................... 118
Sensor Cleaning ........................................................ 120
Error Messages ......................................................... 121
Main Specifications .......................................... 123
Operating Environment for USB Connection and
Provided Software ..................................................... 129
Index .................................................................. 130
For Using Your Camera Safely ........................ 135
Care to be Taken During Handling .................. 137
WARRANTY POLICY ........................................ 141
Regarding copyrights
Images taken with this camera that are for anything other than personal enjoyment cannot be used without permission according to the rights as specified in the Copyright Act.
Please take care, as there are cases where limitations are placed on taking pictures even for personal enjoyment during demonstrations, performances or of items on display. Images taken with the purpose of obtaining copyrights also cannot be used outside the scope of use of the copyright as laid out in the Copyright Act, and care should be taken here also.
To users of this camera
• Do not use or store this camera in the vicinity of equipment that generates strong electromagnetic radiation or magnetic fields. Strong static charges or the magnetic fields produced by equipment such as radio transmitters could interfere with the monitor, damage the stored data, or affect the camera’s internal circuitry and cause camera misoperation.
• The liquid crystal panel used for the monitor is manufactured using extremely high precision technology.
Although the level of functioning pixels is 99.99% or better, you should be aware that 0.01% or fewer of the pixels may not illuminate or may illuminate when they should not.
However, this has no effect on the recorded image.
• In this manual, the generic term “computer(s)” refers to either a Windows PC or a Macintosh.
• In this manual, the term “battery(ies)” refers to any type of batteries used for this camera and its accessories.
Regarding User Registration
In order to better serve you, we request that you complete the user registration, which can be found on the CD-ROM supplied with the camera or on our website.
Thank you for your cooperation.
http://www.ricoh-imaging.com/registration/
Speaker
Built-in flash
AF assist light
Lens mount index
Remote control receiver
Lens unlock button
Lens information contacts
Hot shoe
Microphone
Image plane indicator
Strap lug
Mirror
Microphone terminal
AF coupler
Diopter adjustment lever
Viewfinder
Vari-angle monitor
Battery cover
Connection cable cover
Battery cover unlock lever
Tripod socket
Microphone
Strap lug
Card access lamp
Card slot for SD
Memory Cards
NFC mark
HDMI terminal (type D)
Terminal cover
USB terminal (micro B)
7
1
1
1
2
3
4
5
9
0
8
a b
6
7 c d e f g h
8
1
EV Compensation button (
J
)
Press to change the exposure compensation value. (p.48)
In playback mode, the last JPEG image taken can also be
2
Green button (
M
)
Resets the value being adjusted.
3
Shutter release button (
0
)
Press to capture images. (p.40)
In playback mode, press halfway to switch to capture mode.
4
Main switch
Turns the power on/off, or switches to C (movie) mode.
When the camera is turned on, it enters A (still picture) mode and the indicator lamp lights green. When the switch is turned to C , the camera enters C mode and the lamp lights red.
5
Front e-dial (
Q
)
Changes the values for camera settings such as exposure.
You can change the menu category when a menu screen is
In playback mode, use this to select a different image.
6
Flash pop-up button (
1
)
Press to pop up the built-in flash. (p.53)
7
RAW/Fx button (
P
)
You can assign a function to this button. (p.100)
8
Focus mode switch
Changes the focus mode. (p.54)
9
Live View/Delete button (
K
/
L
)
Displays the Live View image. (p.41)
In playback mode, press to delete images. (p.43)
0
Rear e-dial (
R
)
Changes the values for camera settings such as exposure.
You can change the menu tabs when a menu screen is
You can change the camera settings when the control panel
In playback mode, use this to magnify an image or display
multiple images at the same time. (p.43, p.78)
a
Four-way controller (
ABCD
)
Displays the Sensitivity, White Balance, Flash Mode or
When a menu or the control panel is displayed, use this to move the cursor or change the item to set.
Press B in single image display of the playback mode to
display the playback mode palette. (p.77)
b
INFO button (
G
)
Changes the style of the display on the monitor. (p.10, p.14)
c
Mode dial
Changes the capture mode. (p.39)
d
Self-portrait shutter button
When shooting with Live View, this button can be used as a shutter release button and facilitates taking self-portraits by holding the camera with the lens facing you. The indicator lamp lights green or red when the button can be used as a
shutter release button. (p.41)
At all other times, this button is used to switch the Wi-Fi
e
AF/AE Lock button (
f
)
Available for adjusting focus, instead of pressing 0 halfway, and for locking the exposure value before shooting.
f
Playback button (
3
)
Switches to playback mode. (p.42)
Press the button again to switch to capture mode.
g
OK button (
E
)
When a menu or the control panel is displayed, press this button to confirm the selected item.
Press this button when [AF Active Area] is set to E or 8 , or when [Contrast AF] is set to g or h to change the
When the power is turned on, the indicator lamp lights blue.
The lamp turns off after a while.
h
MENU button (
F
)
Displays a menu. Press this button while the menu is
displayed to return to the previous screen. (p.19)
1
9
1
About the indicator lamps
The main switch lamp, self-portrait shutter button lamp, and
E lamp turn off in the following situations.
• From the time when 0 is pressed halfway until the end of shooting
• While f is pressed
• During playback mode
• While a menu is displayed
• During Auto Power Off
You can set the lamp lighting settings in [Indicator Lamps] of the D
About the four-way controller
In this manual, each button of the fourway controller is indicated as shown in the illustration on the right.
Capture Mode
With this camera, you can take pictures while looking through the viewfinder or while viewing the image on the monitor.
When using the viewfinder, you can take pictures while checking the status screen displayed on the monitor and looking
through the viewfinder. (p.39) When not using the viewfinder,
you can take pictures while viewing the Live View image
displayed on the monitor. (p.41)
The camera is in “standby mode” when it is ready to shoot, such as when the status screen or Live View image is displayed.
Press G in standby mode to display the “control panel” and
change settings. (p.18) You can change the type of information
displayed in standby mode by pressing
G
while the control
FF
250
5.6
G
Standby mode
(Status screen)
FF
250
5.6
Control panel
G
Shooting Info Display selection screen
10
Status Screen
FF
250
5.6
11
1
11
11
14
11
21
2324
2 3
12
13
15
16
22
25
4 5 6 7 8 9 10
16
17 18 19
20
26
17 19 20
27
5 5
´
00˝
1
2
3
4
5
6
GPS positioning status
7
Wireless LAN status
16
17
18
Focusing area (AF point)
19
20
21
Flash Exposure
22
White Balance fine-
8
9
Shake Reduction/
23
24
Memory card
10
12
Horizon Correction
Battery level
11
E-dial guide
Shutter speed
13
Aperture value
25
Image storage capacity
26
Number of shots during
Multi-exposure, Interval
Shooting, or Interval
Composite/Maximum tracking duration of
14
EV Compensation
27
Operation guide
15
EV bar scale
Live View
1 2 3 4 5 6 7 8 9 10 11
12
13
19 20 21
+1.7
EV
22
14
15
±0EV
99999
23 24 25
16
17
18
1
2
3
4
5
6
7
GPS positioning status
8
Wireless LAN status
9
10
Shake Reduction/
Horizon Correction
11
Battery level
12
Temperature warning
13
Histogram
14
Electronic Level
26
15
Electronic Level (vertical
16
17
EV bar scale
18
Operation guide, and number of shots during
Multi-exposure, Interval
Shooting or Interval
Composite
19
20
Shutter speed
21
Aperture value
22
23
24
Memory card
25
Image storage capacity
26
Face detection frame
(when [Contrast AF] is set to [Face Detection])
t
Memo
• In [Live View] of the
A
3 menu, you can change the settings of
the items displayed on the monitor during Live View. (p.22)
1
11
1
12
Control Panel
A
mode
1
5
10
15
20
6
11
16
21
1
2
26
7
12
17
22
8
13
18
23
27
3 4
9
14
19
When shooting with Live View
5
10
15
20
6
11
16
21
1
2
26
7
12
17
22
8
13
18
23
27
3 4
9
14
19
C
mode
Function name
2
Setting
3
Memory card
1:23
'
45
"
4
Number of recordable still pictures/Movie recordable time
5
6
5
15
21
6
16
24
1
2
7
17
25
8
13
23
3 4
12
14
26 27
7
8
Clarity Enhancement
9
10
Distortion Correction
11
Peripheral Illumination
12
13
Highlight Correction
14
Shadow Correction
15
16
17
18
19
Slow Shutter Speed NR
20
21
JPEG Recorded Pixels
22
23
24
25
Recording Sound Level
(p.50)
26
Current date and time
27
t
Memo
• The items that can be selected vary depending on the current camera setup.
• If no operations are made within 1 minute while the control panel is displayed, the camera returns to standby mode.
Shooting Info Display
You can change the type of information displayed in standby mode by pressing G while the control panel is displayed.
Use CD to select the type and press E .
When shooting with the viewfinder
Status
Screen
Electronic
Level
Displays the settings for shooting with the
Displays the camera angle.
A scale indicating the horizontal camera angle appears at the center of the screen, and a scale indicating the vertical camera
Example:
Tilted 1.5° to the left
(yellow)
Vertically level (green) angle appears on the right or left side. When the angle exceeds the range that can be displayed in the scale, the indicators on the scale are displayed in red.
Display
Off
Nothing is displayed on the monitor.
Electronic
Compass
The current latitude, longitude, altitude, direction,
Coordinated Universal Time (UTC), capture mode, and exposure value are displayed. Turn the camera off and on again to return to the status screen.
Available only when the optional GPS unit is
attached to the camera and is operating. (p.117)
When shooting with Live View
Standard
Information
Display
Electronic
Level
No
Information
Display
The Live View image and the settings for
shooting with Live View are displayed. (p.11)
The same electronic level as when shooting with the viewfinder is displayed.
Certain icons, such as those for the capture mode and drive mode, are not displayed.
t
Memo
• The status screen is displayed when the camera is turned off and on again. If [Shooting Info Display] is set to [On] in
[Memory] of the A 4 menu, the screen selected on the
Shooting Info Display selection screen appears when the
camera is turned off and on again. (p.105)
1
13
1
Playback Mode
The captured image and shooting information are displayed in single image display of the playback mode.
Press G to change the type of information displayed in single image display. Use CD to select the type and press E .
G
14
Single image display
(Standard Information
Display)
Playback Info Display selection screen
Standard
Information Display
Detailed
Information Display
Histogram Display
RGB Histogram
Display
Captured image, file format, exposure parameters, and operation guide indicators are displayed.
Detailed information on how and when the image was taken is displayed.
Captured image and brightness
histogram are displayed. (p.15)
Not available during movie playback.
Captured image and RGB histogram
Not available during movie playback.
No Information
Display
Only the captured image is displayed.
t
Memo
• The screen selected in the Playback Info Display selection screen is displayed in playback mode when the camera is turned off and on again. If [Playback Info Display] is set to
[Off] in [Memory] of the A 4 menu, the [Standard Information
Display] always appears first when the camera is turned on.
Detailed Information Display
Still pictures
2000 F2.8
5000K
±0
±0
±0
±0
2
1
12
16
21 22 23
30
38
31 32
13
7
3
6
8
14
9
11
4
10
15
17 18 19 20
24 25 26 27 28 29
33 34
39
35
5
36
37
Movies
Page 2
0m
123°
N 36°45.410'
W140°02.000'
1
Captured image
2
Rotation information
3
4
5
Folder number-File
±0
±0
±0
±0
12
16
1
30
38
31 42
13
17
3
6
40
41
4
11
14 15
18 19
26 27
20
39
35
29
5
36
37
AB
2
1
3
45
38
46
47
48
49
45
43
4
44
50
5
6
7
8
Flash Exposure
9
10
Focusing area (AF point)
11
30
12
Shutter speed
13
Aperture value
31
JPEG Recorded Pixels
14
15
32
16
17
White Balance fine-
33
34
Color Moiré Correction
18
19
20
Clarity Enhancement
21
Distortion Correction
35
Lens focal length
36
Custom Image setting
37
Custom Image parameters
22
23
Peripheral Illumination
Lateral Chromatic
Aberration Adjustment
38
Page guide
39
Shooting date and time
40
Length of time of the recorded movie
41
Recording Sound Level
42
24
Diffraction Correction
25
Color Fringe Correction
29
Shake Reduction/
Horizon Correction
43
44
45
Information tampering
26
Highlight Correction warning
46
27
Shadow Correction
47
48
49
28
50
Universal Coordinated
Histogram Display
Use AB to switch between the brightness histogram and RGB histogram.
Brightness histogram
1 2 3 4
6
1 5
7 8 9
2
10
AB
3 4
5
11
12
13
1
Histogram (Brightness)
2
Switch RGB histogram/
Brightness histogram
3
Protect setting
4
Folder number-File number
5
Save RAW Data
6
File Format
7
Shutter speed
8
Aperture value
9
Sensitivity
10
EV Compensation
11
Histogram (R)
12
Histogram (G)
13
Histogram (B)
6 7 8 9
RGB histogram
10
1
15
1
When shooting with the viewfinder, the following information appears in the viewfinder.
2 3
4 5 6
1
7 8 9
1
10 11 12
t
Memo
• The information is displayed in the viewfinder when 0 is pressed halfway, or during the meter operating time
(default setting: 10 sec.).
• The AF point in use for autofocus appears in red
(Superimpose AF Area) when 0 is pressed halfway.
You can set it to [Off] in [16 Superimpose AF Area] of the E 3 menu.
• You can adjust the image sharpness in the viewfinder using the diopter adjustment lever. If it is difficult to move the diopter adjustment lever, lift up and remove the eyecup. Adjust the diopter setting until the AF frame in the viewfinder looks sharp and clear.
13 14
1
2
Spot metering frame
3
4
5
6
Shutter speed
7
Aperture value
8
9
EV bar scale/Electronic
10
ISO/ISO AUTO
15 16 17 18 19
11
15
Exposure compensation value
12
13
14
16
17
Flash Exposure
18
EV Compensation
19
16
You can check whether the camera is tilted by displaying the electronic level. The electronic level for the horizontal camera angle can be displayed in the EV bar scale in the viewfinder, and the electronic levels for the vertical and horizontal camera
angles can be displayed on the Live View screen. (p.11)
Select whether to display the electronic level in [Electronic
Level] of the A
When level (at 0°)
When tilted 5° to the left
When held vertically and tilted 3° to the right
1
17
1
The camera functions and their settings can be selected and changed by using the following ways.
Direct keys
Control panel
Menus
Press ABCD in standby mode.
Press
G
in standby mode.
(indicated with the v icon in this manual)
Press
F
.
A
Sensitivity
B
White Balance
C
Flash Mode
D
Drive Mode
G
You can set frequently used shooting functions. Press G in standby mode.
Use ABCD to select an item.
Use
R
to change settings.
Press E to make detailed settings.
Press
F
to cancel the setting operation.
Press
E
to confirm the selected item and return to the control panel.
18
F
Most functions are set from the menus. The functions that can be set on the control panel can also be set from the menus.
1
Use
Q
to change the menu category.
Use R to switch between menu tabs.
Use AB to select an item.
Digital Filter
HDR Capture
Menu tabs
2
Press F to exit the menu screen.
1
Press
D
to display the submenu.
Press D to display the pop-up menu.
1
2
Use AB to select an item.
Press F to cancel the pop-up menu.
Press
E
to confirm the selected item.
Press F to return to the previous screen.
19
1
t
Memo
• For the Custom Setting menus ( E 1-5), you can show the setting screen of the next item in order of the menus on the monitor by turning
R
while the submenu of the currently selected item is displayed.
• Press F to display the first tab of the proper menus for the camera settings at that time. To display the menu tab last selected first, set in [25 Save Menu Location] of the E 4 menu.
• Settings are returned to their default values with [Reset] of the D 3 menu. To reset all the settings in the Custom Setting menus to the defaults, use [Reset Custom Functions] of the
E
5 menu. (Some settings do not apply.)
20
Menu Item
Exposure Mode
A 1
Scene Mode
Image
Capture
Settings
File Format
JPEG Recorded
Pixels
JPEG Quality
RAW File Format
AF
Settings
AF Active Area
AF Assist Light
AE Metering
HDR
Capture
HDR Capture
Bracket Value
Auto Align
Function
Temporarily changes the exposure mode when the mode dial is set to O or P .
Sets the image finishing tone such as color and contrast before shooting an image.
Selects the scene mode that best suits the situation. (
S mode)
Sets the file format of images.
Default Setting Page
G
Bright
Portrait
JPEG
Sets the recording size of JPEG images.
Sets the quality of JPEG images.
Sets the RAW file format.
Selects the autofocus method when shooting with the viewfinder.
Selects the area to adjust the focus when shooting with the viewfinder.
Discharges the assist light when autofocusing in dark locations.
Selects the part of the sensor to use for measuring brightness and determining exposure.
Applies a digital filter effect when taking pictures.
Sets the type of high dynamic range shooting.
Sets the amount to change the exposure.
Sets whether to automatically adjust the composition.
q m
PEF z
Auto
(11 AF Points)
On
Multi-segment
No Filter
Off
±2EV
On
1
21
1
22
Menu
A
A
2
3
Item
Distortion
Lens
Correction
D-Range
Settings
Peripheral Illumin.
Lat-Chromatic-Ab
Adj
Diffraction
Correction
Highlight
Shadow
High-ISO NR
Function
Enhances the texture and surface details of the subject.
Reduces distortions occurring due to lens properties.
Reduces peripheral light fall-off occurring due to lens properties.
Reduces lateral chromatic aberrations occurring due to lens properties.
Corrects blur caused by diffraction when using a small aperture.
Expands the dynamic range and prevents overexposed areas from occurring.
Expands the dynamic range and prevents underexposed areas from occurring.
Sets the Noise Reduction setting when shooting with a high
ISO sensitivity.
GPS
Live View
Electronic
Level
Live View
Sets the Noise Reduction setting when shooting with a slow shutter speed.
Sets the camera action when the optional GPS unit is used.
Sets the autofocus mode for shooting with Live View.
Emphasizes the outline of the subject in focus and makes it easier to check the focus.
Grid Display
Displays the grid during Live View.
Histogram Display
Displays the histogram during Live View.
Highlight Alert
Viewfinder
Sets overexposed areas to blink red during Live View.
Displays the electronic level in the EV bar scale in the viewfinder.
Horizon Correction
AA Filter Simulator
Shake Reduction
Input Focal Length
Displays the electronic level in Standard Information Display of
Live View.
Corrects horizontal tilt when in
A
mode.
Applies a low-pass filter effect using the Shake Reduction mechanism.
Activates the Shake Reduction function.
Sets the focal length when using a lens of which focal length information cannot be obtained.
Default Setting
Off
Off
Off
On
On
Auto
Auto
Auto
Auto
Off
Off
Off
Page
–
Face Detection
Off
Off
On
Off
Off
On
35mm
–
–
Menu
A 4
Instant
Review
E-Dial
Programming
Item
Display Time
Zoom Review
Save RAW Data
Function
Sets the Instant Review display time.
Displays the magnified image during Instant Review.
Saves the RAW data during Instant Review.
Delete
Deletes the displayed image during Instant Review.
Histogram Display
Displays the histogram during Instant Review.
Highlight Alert
Sets overexposed areas to blink red during Instant Review.
G
H
I
J
K
L
M m
Sets the Q / R / M operation for each exposure mode.
n p o
Rotation Direction
Reverses the effect obtained when
Q
or
R
is turned.
Default Setting Page
1sec.
On
On
On
Off
Off
I , J , X G
–, ISO, –
I , –, –
–,
J
, –
I , J , G LINE
I , J , G LINE
–,
J
, –
–, –, –
–,
J
,
G
LINE
I , J , G LINE
I , J , G LINE
Rotate Right
1
23
1
Menu
Button
Customization
Item
RAW/Fx Button
AF/AE-L Button
AF/AE-L Button
(Movie)
Self-portrait
Shutter Button
Function
Sets the function for when
P
is pressed.
Sets the function for when f
is pressed.
Sets the function for when f
is pressed in
C
mode.
Sets whether to use the self-portrait shutter button as the shutter release button when taking self-portraits.
Default Setting Page
One Push
File Format
Enable AF1
Enable AF1
A 4
Memory
Determines which settings to save when the power is turned off.
Save USER Mode
You can save frequently used capture settings to O or P of the mode dial.
*1 The function appears only when the mode dial is set to O or P .
*2 The function appears in modes other than S mode.
*3 The function appears in S mode.
*4 The function can also be set from the control panel.
On
On for settings other than
Digital Filter,
HDR Capture,
Clarity
Enhancement, and Shooting
Info Display
–
24
Menu Item
C 1
Movie SR
*1 The function can also be set from the control panel.
Function
Sets the number of recorded pixels and the framerate of the movie.
Sets the Recording Sound Level for recording.
Applies a digital filter effect when recording a movie.
Sets the type of high dynamic range shooting.
Enhances the texture and surface details of the subject.
Activates the Shake Reduction function.
Default Setting Page u
/30p
Auto
No Filter
Off
Off
On p.50
–
Menu Item
Display Duration
Screen Effect
Slideshow
Repeat Playback
B 1
Quick Zoom
Auto Movie
Playback
Highlight Alert
Auto Image Rotation
Protect All Images
Delete All Images
Function
Sets an image display interval.
Sets a transition effect when the next image is displayed.
Starts the slideshow again from the beginning after the last image is displayed.
Plays back movies during the slideshow.
Sets the initial magnification when magnifying images.
Sets overexposed areas to blink red in Standard Information
Display or Histogram Display in playback mode.
Rotates images which were captured with the camera held vertically or of which the rotation information has been changed.
Protects all stored images at once.
Deletes all stored images at once.
Default Setting Page
3sec.
Off
Off
On
Off
Off
On
–
–
–
–
–
–
1
25
1
Menu
D 1
Item
Language/
W
Date Adjustment
World Time
Text Size
Sound Effects
LCD
Display
Guide Display
Display Color
LCD Display Settings
USB Connection
D 2
HDMI Out
Folder Name
Create New Folder
File Name
File No.
Sequential
Numbering
Reset File Number
Copyright Information
Function
Changes the display language.
Sets the date and time and the display format.
Switches between the date and time display of your hometown city and that of a specified city.
Magnifies the text size when selecting a menu item.
Switches the operation sound on/off and changes the volume for In-focus, AE-L, Self-timer, Remote Control, Change AF
Point, One Push File Format, Shake Reduction, and Wi-Fi operations.
Displays the operation guides when the capture mode is changed.
Sets the display color of the status screen, control panel and menu cursor.
Adjusts the brightness, saturation and the color of the monitor.
Sets the USB connection mode when connecting to a computer.
Sets the output format when connecting to an AV device with an HDMI input terminal.
Sets the folder name in which images are stored.
Creates a new folder on the memory card.
Sets the file name assigned to an image.
Continues the sequential numbering for the file name when a new folder is created.
Resets the file number setting and returns to 0001 each time a new folder is created.
Sets the photographer and copyright information embedded in the Exif data.
Default Setting Page
English
01/01/2015
Hometown
Std.
Volume 3/
All On
On
1
0
MSC
Auto
Date
–
IMGP/_IMG
On
–
Off
–
–
26
Menu Item
Flicker Reduction
D 3
Auto Power Off
Indicator
Lamps
Other Indicator
Lamps
Self-timer
Remote Control
Wi-Fi
Reset
D
4
Pixel Mapping
Dust Removal
Sensor Cleaning
Format
Firmware Info/Options
Certification Marks
Function
Cuts down on the screen flicker by setting the power frequency.
Sets the time until the camera turns off automatically if no operations are made for a certain period of time.
Lights up the main switch lamp, self-portrait shutter button lamp, and E lamp when the power is turned on.
Lights up the remote control receiver lamp during the countdown for Self-timer shooting.
Lights up the remote control receiver lamp during the standby and countdown for Remote Control shooting and after Remote
Control shooting.
Activates the built-in Wi-Fi function.
Resets the settings of the direct keys and for the items of the
A menu, C menu, B menu, D menu, control panel, and playback mode palette.
Maps out and corrects any defective pixels on the sensor.
Cleans the sensor by shaking it.
Locks the mirror in the up position for cleaning the sensor with a blower.
Formats a memory card.
Displays the camera’s firmware version. You can check the current firmware version before running an update.
Displays the certification marks of conformance to wireless technical standards.
Default Setting Page
50Hz
1min.
High
On
On
Off
–
–
Off
–
–
–
–
–
–
–
1
27
1
Menu Item
1 EV Steps
2 Sensitivity Steps
3 Meter Operating Time
4 AE-L with AF Locked
E 1
5 Link AE and AF Point
6 Auto EV Compensation
7 Bulb (B) Mode Options
8 Bracketing Order
9 One-Push Bracketing
10 Interval Shooting Options
E 2
11 AF in Interval Shooting
12 WB Adjustable Range
13 WB When Using Flash
14 AWB in Tungsten Light
Function
Sets the adjustment steps for exposure.
Sets the adjustment steps for ISO sensitivity.
Sets the meter operating time.
Sets whether to lock the exposure value when the focus is locked.
Sets whether to link the exposure and AF point in the focusing area.
Automatically compensates the exposure when the correct exposure cannot be achieved with the current settings.
Sets the camera operation when pressing
0
in
M
mode.
Sets the order for Bracketing shooting.
Shoots all frames with one release when using Bracketing.
Sets whether to start counting the time of interval from when exposure starts or when exposure ends for Interval Shooting,
Interval Composite, and Interval Movie Record.
Sets whether to lock the focus position used when the first picture is taken or perform autofocus for each exposure for
Interval Shooting and Interval Composite.
Sets whether to automatically fine-tune the white balance when the light source is specified for the white balance setting.
Default Setting Page
1/3 EV Steps
1 EV Step
10sec.
–
Off
Off
Off
Type1
0 - +
Off
Interval
Locks focus at
1st exposure
Fixed
–
–
–
Sets the white balance setting when using a flash.
Sets the tungsten light color tone when the white balance is set to [Auto White Balance].
Auto White
Balance
Strong
Correction
28
Menu
E
E
4
5
Item
15 Color Temperature Steps
16 Superimpose AF Area
17 AF.S Setting
E 3
18 1st Frame Action in AF.C
19 Action in AF.C Continuous
20 Hold AF Status
21 AF with Remote Control
22 Release While Charging
23 Color Space
24 Save Rotation Info
25 Save Menu Location
26 Catch-in Focus
27 AF Fine Adjustment
28 Using Aperture Ring
Reset Custom Functions
Function
Sets the adjustment steps for the Color Temperature option of the white balance.
Displays the active AF point in red in the viewfinder.
Sets the action priority for when the autofocus mode is set to x and 0 is fully pressed.
Sets the action priority for the first frame when the autofocus mode is set to y and 0 is fully pressed.
Sets the action priority during Continuous Shooting when the autofocus mode is set to y .
Maintains the focus for a certain amount of time when the subject happens to move out of the selected focusing area after being focused.
Sets whether to use autofocus when shooting with a remote control unit.
Sets whether to release the shutter while the built-in flash is being charged.
Sets the color space to use.
Saves rotation information when shooting.
Saves the last menu tab displayed on the monitor and displays it again the next time
F
is pressed.
Enables Catch-in Focus shooting when a manual focus lens is attached. The shutter is released automatically when the subject comes into focus.
Allows you to precisely fine tune your lenses with the camera’s autofocus system.
Enables the shutter to release when the lens aperture ring is set to a position other than 9 (Auto).
Resets all the settings of the Custom Setting menus to the defaults.
Default Setting Page
Kelvin
On
Focus-priority
Releasepriority
Focus-priority
Off
Off
Off sRGB
On
Reset Menu
Location
Off
Off
Disable
–
–
–
–
1
29
2
1
Pass the end of the strap through the strap lug and secure it on the inside of the clasp.
2
Attach the other end in the same manner.
1
Make sure that the camera is turned off.
2
Remove the body mount cover (
1
) and lens mount cover (
2
).
After removing the cover, be sure to put the lens down with the lens mount side facing upward.
3
Align the lens mount indexes (red dots:
3
) on the camera and the lens, and secure by turning the lens clockwise until it clicks.
3
3
30
To remove the lens
Attach the lens cap, and then turn the lens counterclockwise while pressing the lens unlock button
( 4 ).
4
u
Caution
• When attaching or removing the lens, choose an environment that is relatively free of dirt and dust.
• Keep the body mount cover attached on the camera when a lens is not attached.
• Be sure to attach the lens mount cover and lens cap to the lens after removing it from the camera.
• Do not insert your fingers inside the lens mount of the camera or touch the mirror.
• The camera body and lens mount incorporate lens information contacts. Dirt, dust, or corrosion may damage the electrical system. Please contact your nearest service center for professional cleaning.
• When a retractable lens is attached and is not extended, you cannot take pictures and use some functions. If the lens is retracted during shooting, the camera stops working. Refer to
“How to Use a Retractable Lens” (p.40) for details.
• We assume no responsibility nor liability for accidents, damages and malfunctions resulting from the use of lenses made by other manufacturers.
t
Memo
• Refer to “Functions Available with Various Lenses” (p.113)
for details on the functions of each lens.
Use the battery D-LI109 and battery charger D-BC109 exclusively developed for this camera.
1
Connect the AC plug cord to the battery charger.
2
Plug the AC plug cord into the power outlet.
Battery charger Indicator lamp
2
AC plug cord
31
2
3
Face the
A
mark on the battery up, and insert it into the battery charger.
Insert the battery into the battery charger at an angle, and then fit into place.
The indicator lamp is lit while charging and turns off when the battery is fully charged.
u
Caution
• Do not use the battery charger D-BC109 to charge batteries other than the battery D-LI109. Charging other batteries may cause damage or heating.
• Replace the battery with a new one in the following cases:
• If the indicator lamp blinks or does not light after the battery is inserted correctly
• If the battery starts to run down more quickly even after being charged (the battery may have reached the end of its service life) t
Memo
• The maximum charging time is approximately 240 minutes (it depends on temperature and remaining battery power).
Charge in a location where the temperature is between 0°C and 40°C (32°F and 104°F).
u
Caution
• Insert the battery correctly. If the battery is inserted incorrectly, it may not be removed.
• Wipe the electrodes of the battery with a soft dry cloth before inserting.
• Do not open the battery cover or remove the battery while the power is on.
• Be careful as the camera or battery may become hot after the camera has been used continuously for a long period of time.
• Remove the battery when you will not use the camera for a long time. The battery may leak and damage the camera if left installed during prolonged periods of non-use. If the removed battery will not be used for six months or longer, charge the battery for about 30 minutes before storing it. Be sure to recharge the battery every six to twelve months.
• Store the battery in a location where the temperature will remain at or below room temperature. Avoid locations with high temperatures.
• The date and time may be reset if you leave the battery out of the camera for long periods of time. If this happens, set the current date and time again.
1
Open the battery cover.
Slide the battery cover unlock lever ( 1 ) before opening the cover.
1
32
2
Face the
A
mark on the
3
battery towards the outside of the camera, and insert the battery until it locks into place.
To remove the battery, push the battery lock lever in the direction of 2 .
Close the battery cover.
2
We recommend the use of the optional AC adapter kit K-AC128 when using the monitor for a long time or when connecting the camera to a computer or AV device.
1
Make sure that the camera is turned off.
2
Open the battery cover.
Remove the battery if it is inserted in the camera.
3
Pull out the connection cable cover on the right side of the battery chamber.
2
t
Memo
• The battery level may not be displayed properly if the camera is used at low temperatures or when performing Continuous
Shooting for a long time.
• Battery performance temporarily decreases as the temperature decreases. When using the camera in cold climates, have extra batteries at hand and keep them warm in your pocket. Battery performance will return to normal at room temperature.
• Have extra batteries ready when traveling overseas, or taking a lot of pictures.
4
Insert the DC coupler into the battery chamber.
5
Close the battery cover.
Make sure that the connection cable comes out from the connection cable opening.
33
2
6
Connect the DC coupler and the AC adapter.
The following memory cards can be used with this camera.
• SD Memory Card
• SDHC Memory Card
• SDXC Memory Card
In this manual, these cards are referred to as memory cards.
1
Make sure that the camera is turned off.
2
Slide the memory card cover in the direction of
1
and then rotate it to open as shown by
2
.
1
2
7
Connect the AC adapter to the AC plug cord, and plug the cord into the power outlet.
u
Caution
• Make sure that the camera is turned off before connecting or disconnecting the AC adapter.
• Make sure that connections are secure between the terminals. The memory card or data may be corrupted if the connection to the power supply is lost while the card is being accessed.
• After removing the DC coupler, return the connection cable cover to its original position.
• Be sure to read the manual of the AC adapter kit before using the AC adapter.
3
Insert the card all the way into the memory card slot with the memory card label facing toward the side with the monitor.
Push the memory card in once and release to remove.
34
4
Rotate the memory card cover as shown by
3
, and slide it in the direction of
4
.
4
3
u
Caution
• Do not remove the memory card while the card access lamp
(orange) is lit.
• If the memory card cover is opened while the power is on, the camera turns off. Do not open the cover while the camera is in use.
• Use this camera to format (initialize) a memory card that is
unused or has been previously used on other devices. (p.38)
• Use a high-speed memory card when recording movies. If the write speed cannot keep up with the recording speed, the writing may stop during recording.
The following procedure explains how to open the monitor with the LCD screen facing inward.
1
Open the monitor 180° horizontally while holding the top and bottom of it.
2
2
Rotate the monitor 180° forward.
The monitor can also be rotated up to 90° backward.
3
Close the monitor on the camera so that the LCD screen can be seen.
35
2
u
Caution
• To close the monitor with the LCD screen facing inward, rotate the monitor 180° backward in Step 2.
• When the monitor is closed with the LCD screen facing inward, you cannot play back images and display the menus unless the camera is connected to an AV device equipped with an HDMI terminal.
• Do not hold the camera by the monitor or rotate the monitor beyond its movable range.
• Do not carry the camera or put it in a bag with the monitor open. You can carry the camera when the monitor is closed regardless of the LCD screen direction.
t
Memo
• The items displayed on the monitor rotate according to the direction and angle of the monitor.
• You can take low-angle and high-angle pictures by adjusting the angle of the monitor while it is open horizontally. Also, you can take self-portraits by pointing the lens toward yourself while checking the Live View image on the LCD screen of the
Turn the camera on and make the initial settings.
1
Turn the main switch to
[ON].
The lamp lights up in green.
The first time the camera is turned on after purchase, the
[Language/ W ] screen appears.
t
Memo
• The power automatically turns off when you do not perform any operations within a set period of time. (Default setting:
1min.) You can change the setting in [Auto Power Off] of the
D
36
1
Use
ABCD
to select the desired language and press
E
.
The [Initial Setting] screen appears in the selected language.
Proceed to Step 6 if F
(Hometown) does not need to be changed.
2
Press
B
to move the frame to
F
and press
D
.
The [ F Hometown] screen appears.
3
Use
CD
to select a city.
Use R to change the region.
Cities” (p.128) for cities that can
be selected as a hometown.
4
Press
B
to select [DST] (daylight saving time), and use
CD
to select
Y
or
Z
.
5
Press
E
.
The camera returns to the [Initial Setting] screen.
6
Press
B
to select [Text Size] and press
D
.
7
Use
AB
to select [Std.] or
[Large], and press
E
.
Selecting [Large] increases the text size of the selected menu items.
8
Press
B
to select [Settings complete] and press
E
.
The [Date Adjustment] screen appears.
1
Press
D
, and use
AB
to select the date format.
2
Press
D
, and use
AB
to select [24h] or [12h].
3
Press
E
.
The frame returns to [Date Format].
4
Press
B
, and then press
D
.
The frame moves to the month if the date format is set to
[mm/dd/yy].
2
37
2
5
Use
AB
to set the month.
Set the day, year and time in the same manner.
6
Press
B
to select [Settings complete] and press
E
.
The [LCD Display] screen appears.
1
Use
CD
to select a color.
Select the display color of the status screen, control panel and menu cursor from colors 1 to 12.
FF
125
5.6
2
Press
E
.
The camera switches to capture mode and is ready to take a picture.
t
Memo
• You can change the language, text size, date and time, and
LCD display settings from the
D
1
Press
F
.
The A 1 menu appears.
2
Use
Q
or
R
to display
D
4 menu.
3
Use
AB
to select [Format] and press
D
.
The [Format] screen appears.
4
Press
A
to select [Format] and press
E
.
Formatting starts. When formatting is completed, the D 4 menu reappears.
D
5
Press
F
.
u
Caution
• Do not remove the memory card while formatting, or the card may be damaged.
• Formatting deletes all data, both protected and unprotected.
t
Memo
• When a memory card is formatted, the volume label “K-S2” is assigned to the card. When the camera is connected to a computer, the memory card is recognized as a removable disk with the name “K-S2”.
38
Take pictures using the Auto Picture ( R ) mode in which the camera automatically selects the optimal capture mode.
1
Remove the front lens cap by pushing the top and bottom portions as indicated in the illustration.
When a retractable lens is attached, extend the lens before turning the camera on.
y
How to Use a Retractable Lens (p.40)
2
Turn the camera on.
3
Set the focus mode switch to
v
.
4
Turn the mode dial and align the dial indicator to
R
.
Dial indicator
The selected capture mode is displayed on the monitor (Guide
Display).
y Guide Display settings
5
Look through the viewfinder to view the subject.
When using a zoom lens, turn the zoom ring to the right or left to change the angle of view.
FF
250
5.6
--
--
2
39
2
6
Position the subject inside the AF frame and press
0
halfway.
The focus indicator ( P ) appears and you will hear a beep when the subject comes into focus.
Focus indicator
7
Press
0
fully.
The captured image is displayed on the monitor (Instant
Review).
Available operations during Instant Review
L
Deletes the image.
R
J
Magnifies the image.
Saves the RAW data (only when a JPEG image was taken and the data remains in the buffer).
t
Memo
• You can use the f
button to focus on the subject. (p.54)
• You can select whether to make a beep sound and change the sound volume in [Sound Effects] of the D
• You can set the operation and display settings for Instant
Review in [Instant Review] of the A
[Display Time] is set to y
, Instant Review is displayed until the next operation.
How to Use a Retractable Lens
3
If the camera is turned on when a retractable lens, such as smc
PENTAX-DA L 18-50mm F4-5.6
DC WR RE, is attached and is not
2
extended, an error message is displayed on the monitor. Turn the
1
zoom ring in the direction of 2 while pressing the button on the ring ( 1 ) to extend the lens.
When retracting the lens, turn the zoom ring in the opposite direction to 2 while pressing the button on the ring and align the white dot to the position 3 .
40
1
Press
K
in Step 5 of
The Live View image is displayed on the monitor.
Available operations
E
Magnifies the image.
Use
R
to change the magnification (up to
10×).
Use
ABCD
to change the area to display.
Press M to return the display area to the center.
Press E to return to 1× image display.
K
Exits shooting with Live View.
2
Position the subject inside the AF frame on the monitor and press
0
halfway.
The AF frame turns green and you will hear a beep when the subject comes into focus.
AF frame
Subsequent steps are the same as shooting with the viewfinder.
Taking a Self-portrait
You can take self-portraits while checking the Live View image by facing the lens and the LCD screen of the monitor toward yourself.
1
the monitor 180° horizontally.
The self-portrait shutter button lamp lights green.
2
Face both the lens and the
LCD screen of the monitor toward yourself.
2
3
Check the Live View image and press the self-portrait shutter button.
After the picture is taken, Instant
Review is displayed until the next operation.
The camera returns to standby mode when the self-portrait shutter button is pressed again.
41
2
42
u
Caution
• The self-portrait shutter button does not work with a halfway press and needs to be fully pressed down. If the button is pressed when the focus mode is set to v , a picture is taken after autofocus is performed. Even if the subject is not in focus, the shutter release has priority over focusing the subject and a picture is taken.
• When the self-portrait shutter button can be used for shooting, other button/dial operations are disabled.
• You cannot take pictures using the self-portrait shutter button in the following situations.
• When the camera is connected to an AV device equipped with an HDMI terminal
• When 0 is pressed for the first shutter release in a mode requiring two shutter releases, such as in movie recording mode or in bulb exposure mode. (The same button must be used to start and stop shooting.)
• Images cannot be previewed.
• The image cannot be deleted or magnified during Instant
Review.
• Do not force the monitor over the maximum viewing angle.
• Keep the monitor closed when not using the camera.
t
Memo
• Shooting with the self-portrait shutter button is available only when [Self-portrait Shutter Button] of [Button Customization] in the A 4 menu is set to [On] (default setting) and the monitor
is positioned at the correct angle. (p.100) When the self-
portrait shutter button can be used for shooting, the indicator lamp lights green or red and the main switch lamp turns off. At all other times, the self-portrait shutter button functions as the
switch to turn the Wi-Fi function on or off. (p.90)
• Self-portraits can also be taken using a drive mode that
employs the self-timer or remote control. (p.59)
Review the captured image on the monitor.
1
Press
3
.
The camera enters playback mode and the most recently captured image is displayed
(single image display).
2
Review the captured image.
Available operations
C / Q to the left Displays the previous image.
D / Q to the right Displays the next image.
L
R to the right
Deletes the image.
Magnifies the image (up to 16×).
Use ABCD to change the area to display.
Press M to return the display area to the center.
Press E to return to the entire image display.
R to the left
J
G
B
Switches to the thumbnail
Saves the RAW data (only when a JPEG image was taken and the data remains in the buffer).
Changes the type of information
Displays the playback mode
t
Memo
• When J v is displayed on the monitor, the JPEG image that was just taken can also be saved in RAW format (Save
RAW Data).
2
43
v
C
Set the file format for movies in the control panel or [Movie
Capture Settings] of the C 1 menu.
3
v
A
Set the file format, recorded pixels, and quality level for still pictures in the control panel or [Image Capture Settings] of the
A 1 menu.
File Format
JPEG, RAW, RAW+
JPEG Recorded Pixels
q
, p
, o
, r
JPEG Quality
RAW File Format
m , l
PEF, DNG
, k t
Memo
• When [File Format] is set to [RAW+], a JPEG image and a
RAW image with the same file number are saved at the same time.
• [PEF] of [RAW File Format] is a PENTAX original RAW file format.
Recorded Pixels
u t
Framerate
30p, 25p, 24p
60p, 50p u
Caution
• When the drive mode is set to [Interval Movie Record] or [Star
Stream], you cannot set the number of recorded pixels and the framerate. Shooting conditions for Interval Movie Record and Star Stream can be changed from [Parameter Adj.] on the Drive Mode screen.
44
Select the capture mode that suits the subject and shooting conditions.
The following capture modes are available on this camera.
Page Capture Mode
R
(Auto Picture modes)
S
(Scene modes)
Y
(Advanced
HDR mode)
Application
Automatically selects the optimal capture mode from a (Standard), b (Portrait), c (Landscape), d (Macro), e (Moving Object), f (Night Scene Portrait), g (Sunset), h (Blue Sky) or i (Forest).
Offers you various scene modes to choose from.
Takes three consecutive images using the Clarity Enhancement feature to create a single composite image with them.
G
/
H
/
I
/
J
/
K
/
L
/
M
(Exposure modes)
Allows you to change the shutter speed, aperture value, and sensitivity.
u
Caution
• The functions that can be set vary depending on the capture
mode. Refer to “Restrictions on Each Capture Mode” (p.110)
for details.
t
Memo
• You can save frequently used capture modes and settings to
O and P so that you can repeatedly use the same modes
1
Set the mode dial to
S
.
The scene mode selection screen appears.
2
Select a scene mode.
b
Portrait
c
Landscape
d
Macro
e
Moving Object
f
Night Scene
Portrait
g
Sunset
h
Blue Sky
i
Forest
For capturing portraits.
Reproduces a healthy and bright skin tone.
For capturing landscape views.
Reproduces the vivid green of trees.
For capturing tiny objects at close focus range like flowers, coins, jewelry, and more.
For capturing images of fast moving subjects.
For capturing images of people in low light conditions, such as dusk or at night.
For capturing sunrises or sunsets in beautiful, vivid color.
For capturing images of blue sky. Produces a more impressive deep blue.
Enhances colors of trees and sunbeams through foliage and produces a vivid color image.
45
3
3
j
Night Scene
k
Night Scene HDR
l
Night Snap
m
Food
o
Pet
p
Kids
q
Surf & Snow
s
Backlight
Silhouette
t
Candlelight
u
Stage Lighting
Used for shooting at night.
Takes three consecutive images at three different exposure levels
(-1, ±0, +1) to create a single composite image from them.
For taking snapshots in poorly lit places.
For capturing images of food.
Saturation will be rather high to make food look appetizing.
For capturing moving pets.
For capturing moving kids.
Reproduces healthy and bright skin tone.
For capturing images of dazzling backgrounds, such as snowy mountains.
Produces a silhouette image of the subject in backlight conditions.
For capturing scenes in candlelight.
For capturing moving subjects in poorly lit places.
v
Museum
For capturing images in places where a flash is prohibited.
3
Press
E
.
The camera is in standby mode.
Turn R to change the scene mode.
t
Memo
• You can change the scene mode also from the control panel or the A 1 menu.
46
1
Set the mode dial to
Y
.
2
Turn
R
to set the range in which to change the exposure.
Select from ±1, ±2, or ±3.
FF
250
5.6
u
Caution
• This mode cannot be used in combination with some other
Mode x : Available #: Restricted
×
: Not available
Change
Shutter
Speed
Change
Aperture
Value
Change
Sensitivity
EV
Compensation
G
Program Automatic
Exposure
H
Sensitivity Priority
Automatic Exposure
I
Shutter Priority
Automatic Exposure
J
Aperture Priority
Automatic Exposure
K
Shutter & Aperture
Priority Automatic
Exposure
L
Manual Exposure
M
Bulb Exposure
#
× x
× x x
×
×
× x x x x
x x x x x x x
x x x x x x
×
*1 You can set the value to be changed in [E-Dial Programming] of the
A
*2 [ISO AUTO] is not available.
*3 Fixed to [ISO AUTO].
1
Set the mode dial to the desired exposure mode.
Q or R appears on the status screen for the value that can be changed.
FF
30
4.5
The value that can be changed is underlined in the viewfinder.
During Live View,
D
appears for the value that can be changed.
2
Turn
R
.
The aperture value is changed in
J , K , L , or M mode.
The sensitivity is changed in H mode.
3
Turn
Q
.
The shutter speed is changed in
I , K , or L mode.
3
47
3
t
Memo
• The settings for exposure can be specified in increments of
1/3 EV steps. In [1 EV Steps] of the E 1 menu, you can change the adjustment steps to 1/2 EV steps.
• The correct exposure may not be obtained with the selected shutter speed and aperture value when the sensitivity is set to a certain sensitivity.
• In L mode, the difference from the correct exposure is displayed on the EV bar scale while exposure is adjusted.
• In M
mode, some functions are not available. (p.110)
• For each exposure mode, you can set the camera operation for when Q or R is turned or M is pressed. Set in [E-
Dial Programming] of the A
• When shooting with a low shutter speed, you can reduce image noise from the control panel or [Slow Shutter Speed
NR] of the A 2 menu.
Auto
On
Off
Applies Noise Reduction according to the shutter speed, sensitivity, and internal temperature of the camera.
Applies Noise Reduction when the shutter speed is slower than 1 second.
Does not apply Noise Reduction at any shutter speed.
Checking the Depth of Field (Preview)
When [Optical Preview] or [Digital Preview] is assigned to
P in [RAW/Fx Button] of [Button Customization] in the
A 4 menu, you can check the depth of field before taking
48
The compensation value can be set between -5 and +5 EV (-2 and +2 EV in C mode).
1
Press
J
, and then turn
R
.
e
and the compensation value are displayed on the status screen, Live View screen, and in the viewfinder during adjustment.
FF
250
5.6
Available operations
J
Starts/ends adjusting the compensation value.
M
Resets the adjustment value to the default setting.
t
Memo
• Bracketing shooting enables you to take pictures while
automatically changing exposure. (p.62)
Locking the Exposure
To lock the exposure before shooting, use the AE Lock function. This function can be used by assigning [AE Lock] to the f
1
Turn the main switch to
C
.
The indicator lamp lights red and the Live View image is displayed.
Sound
Recordable Time
2
Set the mode dial to the desired capture mode.
The following settings are available depending on the capture mode.
J
/
K
/
L
The camera operates in the selected exposure mode. (The aperture value can be changed only before shooting. When set to L mode, the sensitivity can also be changed.)
O
/
P
The camera operates according to the saved exposure mode.
Other modes
The camera operates in G mode.
3
Focus on the subject.
In v mode, press 0 halfway.
49
3
3
4
Press
0
fully.
Movie recording starts.
In the upper left area of the monitor, “REC” blinks and the size of the recorded movie file is displayed.
5
Press
0
fully again.
Movie recording stops.
6
Return the main switch to the [ON] position to exit
C
mode.
The camera returns to shooting with the viewfinder in A mode.
u
Caution
• When recording a movie with sound, the camera operation sounds are also recorded.
• When recording a movie with an image processing function such as Digital Filter applied, the movie file may be saved with some frames omitted.
• If the internal temperature of the camera becomes high during recording, the recording may be terminated.
• When a retractable lens is attached, recording stops if the lens is retracted during recording and an error message is displayed.
• When the camera enters C mode, the Wi-Fi function is disabled.
t
Memo
• You can change the settings for recording a movie from the control panel or the C
• The sound level for recording a movie can be set from the control panel or [Recording Sound Level] of the C 1 menu.
When [Manual] is selected, [Volume] can be set from 0 to 20.
• You can record a movie continuously up to 4 GB or 25 minutes. When the memory card is full, recording stops.
Using a Microphone
Microphone terminal
You can connect a commercially available stereo microphone to the microphone terminal on the camera. Using an external microphone can also help to reduce the possibility of recording camera operation sounds.
The following specifications are recommended for external microphones.
Plug
Stereo mini plug (ø3.5 mm)
Format
Power
Stereo electret condenser
Plug-in Power Method (operating voltage of
2.0 V or lower)
Impedance
2.2 k Ω
50
1
Display the movie to play back in single image display of the playback mode.
Available operations
A
D
Press and hold
C
Press and hold
B
R
J
G
D
C
Plays back/pauses a movie.
Forwards a frame (when paused).
Fast-forwards playback.
Reverses a frame (when paused).
Fast-reverses playback.
Stops playback.
Adjusts the volume (21 levels).
Saves the displayed frame as a
JPEG file (when paused).
Switches between [Standard
Information Display] and [No
Information Display].
t
Memo
• In [Movie Edit] of the playback mode palette, a movie file can be divided into multiple segments or selected frames can be
1
Press
A
in standby mode.
2
Use
AB
to select an item.
ISO
AUTO
ISO
Sets the range to be adjusted automatically.
Both the upper limit and lower limit can be changed.
Sets a fixed value from
ISO 100 to ISO 51200.
--
3
Use
Q
or
R
to change the value.
4
Press
E
.
The camera returns to standby mode.
t
Memo
• In C mode, the sensitivity can be set from ISO 100 to ISO
3200.
• The adjustment steps for ISO sensitivity is 1 EV step. To adjust the sensitivity in accordance with the EV step setting for exposure, set from [2 Sensitivity Steps] of the E 1 menu.
3
51
3
Noise Reduction when Shooting with a High ISO Sensitivity
You can select the desired Noise
Reduction setting when shooting with a high ISO sensitivity in the control panel or [High-ISO NR] of the A 2 menu.
v
A
Auto
Applies Noise Reduction at optimally calculated levels throughout ISO range.
Low/
Medium/
High
Applies Noise Reduction at constant chosen level throughout ISO range.
Custom
Off
Applies Noise Reduction at user-defined levels for each ISO setting.
Does not apply Noise Reduction at any shutter speed.
When [Custom] is selected, the noise reduction level can be set according to the ISO sensitivity value in the A 2 menu.
1
v
A
Choose the part of the sensor to use for measuring brightness and determining exposure.
Set in the control panel or [AE
Metering] of the A 1 menu.
A
Multisegment
B
Centerweighted
C
Spot
Meters the brightness in multiple different zones of the sensor.
In backlit conditions, this mode automatically adjusts exposure.
Meters the brightness with an emphasis on the center of the sensor.
The sensitivity increases at the center and no automatic adjustment is performed even in backlit conditions.
Meters the brightness only within a limited area at the center of the sensor.
Useful when the subject is small.
t
Memo
• In [5 Link AE and AF Point] of the E 1 menu, the metering point and the AF point can be linked.
52
1
Press
C
in standby mode.
2
Select a flash mode.
Available operations
R Compensates the flash exposure.
Selects the amount of flash discharge (when
[Manual Flash Discharge] is selected).
M Resets the compensation value to the default setting.
3
Press
E
.
The camera returns to standby mode.
4
Press
1
.
The built-in flash is popped up.
3
A
B
C
D
E
F
H
G
Flash On
Flash On
+ Red-eye
Reduction
Slow-speed
Sync
Slow-speed
Sync+Redeye
Trailing
Curtain
Sync
Discharges a flash for each picture.
Discharges a pre-flash for red-eye reduction before the main flash and discharges a flash for each picture.
Sets to a slow shutter speed and discharges a flash for each picture.
Use this, for example, when shooting a portrait with the sunset in the background.
Discharges a pre-flash for red-eye reduction before the main flash is discharged with Slowspeed Sync.
Discharges a flash immediately before closing the shutter.
Sets to a slow shutter speed.
Captures moving objects as if they are leaving a light trail behind them.
K
Auto Flash
Discharge
Auto Flash
+ Red-eye
Reduction
Manual
Flash
Discharge
Automatically measures the ambient light and determines whether to use the flash.
Discharges a pre-flash for red-eye reduction before an automatic flash.
Sets the amount of flash discharge between
FULL and 1/128 power.
t
Memo
• The flash modes that can be selected vary depending on the capture mode.
Capture Mode
R ,
G , H , J
I , K , L , M
Selectable Flash Mode
A , B , C , D
C , D , E , F , H , K
C , D , G , K
The built-in flash cannot be used for some
S
modes and for Y
• You cannot take pictures while the built-in flash is being charged. If you want to take pictures while charging the flash, set [22 Release While Charging] in the
E
4 menu.
• Depending on the lens being used, the use of the built-in flash
53
3
• When the built-in flash is used in J mode, the shutter speed automatically changes over a range from 1/180 seconds to a slow shutter speed depending on the lens being used. The shutter speed is locked at 1/180 seconds when a lens other than a DA, DA L, D FA, FA J, FA or F lens is used.
• When the built-in flash is used in I , K or L mode, any desired shutter speed of 1/180 seconds or slower can be set.
• The built-in flash is optimum for a subject at a distance from approx. 0.7 m to 5 m. Vignetting may occur when used at a distance closer than 0.7 m (this distance varies slightly depending on the lens being used and the sensitivity setting).
Sensitivity
Guide
Number
Sensitivity
Guide
Number
ISO 100
ISO 200
ISO 400
ISO 800
ISO 1600
Approx. 12
Approx. 17
Approx. 24
Approx. 34
Approx. 48
ISO 3200
ISO 6400
ISO 12800
ISO 25600
ISO 51200
Approx. 68
Approx. 96
Approx. 136
Approx. 192
Approx. 272
Set the focus mode switch to v or w .
The autofocus method for shooting with the viewfinder differs from that for shooting with Live View.
Shooting with the viewfinder
Shooting with Live
View
TTL phase-matching autofocus:
Select from x , y , or z mode which enables automatically switching between x and y .
Set the focusing area in [AF Active Area].
Faster autofocus performance than the contrast detection AF is possible.
Contrast detection AF:
Face Detection and Tracking are
t
Memo
• You can use the f button to focus on the subject. The f button operation can be set in
[Button Customization] of the
A
4
54
1
Press
G
in standby mode.
2
Select [AF Mode] and press
E
.
The [AF Mode] screen appears.
3
Select an autofocus mode and press
E
.
v
A
z
Auto-select mode
x
Single mode
y
Continuous mode
Switches automatically between x and y modes according to the subject.
When 0 is pressed halfway and the subject comes into focus, the focus is locked at that position.
The AF assist light turns on as necessary.
The subject is kept in focus by continuous adjustment while
0 is pressed halfway.
P
appears in the viewfinder when the subject comes into focus.
The shutter can be released even if the subject is not in focus.
The control panel reappears.
4
Press
F
.
The camera returns to standby mode.
t
Memo
• The following settings for autofocus operation can be set in the E 3 menu.
17 AF.S Setting
18 1st Frame
Action in AF.C
Focus-priority, Release-priority
Release-priority, Auto, Focus-priority
19 Action in AF.C
Continuous
Focus-priority, Auto, FPS-priority
20 Hold AF Status
Off, Low, Medium, High
In [20 Hold AF Status], you can set whether to immediately reactivate autofocus or to maintain the focus for a certain amount of time before reactivating autofocus when the subject happens to move out of the selected focusing area after being focused. The default setting is to immediately reactivate autofocus when the subject moves out of focus.
• In S mode, [AF Mode] is fixed to x or y
depending on the selected scene mode. (p.110)
• In R mode, [AF Mode] is fixed to z .
3
55
3
Selecting the Focusing Area (AF Point)
v
A
1
Press
G
in standby mode.
2
Select [AF Active Area] and press
E
.
The [AF Active Area] screen appears.
3
Select the desired focus point selection mode and press
E
.
4
Press
F
.
The camera returns to standby mode.
If you selected E or 8 in Step 3, proceed to Step 5.
5
Select the desired AF point.
FF
250
5.6
6
7
E
8
D
Auto (11
AF Points)
Auto (5 AF
Points)
Select
Expanded
Area AF
Spot
Out of the 11 AF points, the camera automatically selects the optimum focusing area.
Out of the 5 AF points, the camera automatically selects the optimum focusing area.
Sets the focusing area to the user selected point from 11 points.
Sets the focusing area to the user selected point from 11 points. When the subject happens to move out of the selected focusing area after being focused, 8 peripheral points are used as back-up points.
Not available in x mode.
Sets the focusing area to the center of the
11 points.
The control panel reappears.
Available operations
ABCD
E
Press and hold E
Changes the AF point.
Returns the AF point to the center.
Switches the function of the arrow keys (
ABCD
) to the
Change AF Point mode or the direct key operation.
t
Memo
• When
E
or
8
is selected, the
E
lamp lights up.
• The AF point can also be changed from [AF Active Area] of
[AF Settings] in the
A
1 menu.
• You can also set the camera so that switching to the Change
AF Point mode by pressing and holding
E
can be operated with P
56
v
A
1
Press
G
in standby mode in Live View.
2
Select [Contrast AF] and press
E
.
The [Contrast AF] screen appears.
3
Select an autofocus mode and press
E
.
e
Face
Detection
f
Tracking
g
Multiple
AF Points
h
Select
i
Spot
Detects and tracks faces of people.
The main face detection frame for AF and AE is displayed in yellow.
Tracks the subject in focus.
The shutter can be released even if the subject is not in focus.
Sets the focusing area to the desired area.
The sensor is divided into 35 areas (7 horizontal by 5 vertical), and you can select a wider or narrower focusing area by using 35, 25, 15, 9, or just 1 of those
35 areas available.
Sets the focusing area by the pixel.
Sets the focusing area to a limited area at the center.
The control panel reappears.
4
Press
F
.
The camera returns to standby mode.
If you selected g or h in Step 3, proceed to Step 5.
5
Press and hold
E
.
6
Select the AF area.
Use the frame that appears on the monitor to change the position and size of the AF area.
Available operations
ABCD
R
M
7
Press
E
.
The AF area is set.
Changes the position of the AF area.
Increases/reduces the size of the AF area (when g is selected).
Returns the AF area to the center.
u
Caution
• When f is selected, the focus lock operation (composition adjustment with the half press of
0
) does not work.
t
Memo
• When g
or h
is selected, the
E
lamp lights up.
• The setting can also be changed from [Contrast AF] of [Live
View] in the
A
3 menu.
• The autofocus mode is fixed to e
in
R
mode and b
, f
, and p
of
S
mode.
• When [Focus Peaking] is set to [On] in the control panel or
[Live View] of the
A
3 menu, the outline of the subject in focus is emphasized and makes it easier to check the focus.
This function works in both v
and w
modes.
3
57
3
E
You can precisely fine tune your lenses with the camera’s autofocus system.
1
Select [27 AF Fine Adjustment] in
E
4 menu and press
D
.
The [27 AF Fine Adjustment] screen appears.
2
Select [Apply All] or [Apply One] and press
E
.
Apply All
Apply One
Applies the same adjustment value to all lenses.
Saves an adjustment value for the lens being used. (Up to 20 values)
3
Select [Setting] and adjust the value.
5
Press
F
twice.
The camera returns to standby mode.
58
Available operations
D / R to the right Adjusts the focus to a closer position.
C
/
R
to the left Adjusts the focus to a farther position.
M
Resets the adjustment value to the default setting.
4
Press
E
.
The adjustment value is saved.
You can choose from the following drive modes.
(
(
(
(
Single Frame Shooting
(
L
)
Normal capture mode
Continuous Shooting
(
Z
/
b
)
Self-timer
O
/
P
/
Y
)
Remote Control
Q
/
R
/
S
)
Bracketing
T
/
1
/
U
)
Multi-exposure
V
/
z
/
W
/
X
)
Continuously takes pictures while
0
Releases the shutter about 12 seconds or 2 seconds after 0
Enables shooting with remote
Takes three consecutive pictures at
different exposure levels. (p.62)
Creates a composite image by taking multiple pictures and merging them
(
(
Interval Shooting
q
/
r
/
s
Interval Composite
t
/
u
/
v
)
)
Interval Movie Record
(
q
/
r
/
s
)
Automatically takes pictures at a set
interval from a set time. (p.64)
Takes pictures at a set interval from a set time and merges them into a
Takes pictures at a set interval from a set time and saves them as a single
Star Stream
(
w
/
x
/
y
)
Takes pictures at a set interval from a set time and saves them as a single movie file using the Bright composite
mode of Interval Composite. (p.67)
u
Caution
• There are restrictions on some drive modes when used in some capture modes or in combination with some other
t
Memo
• In C mode, Remote Control ( Q only), Interval Movie Record, and Star Stream can be selected.
• The Drive Mode setting is saved even after the power is turned off. If [Drive Mode] is set to [Off] in [Memory] of the A 4 menu, the setting returns to [Single Frame Shooting] when
the power is turned off. (p.105)
• The Shake Reduction function is automatically turned off when the drive mode that employs self-timer or remote control is selected.
• When the drive mode that employs the self-timer or remote control is selected, exposure may be affected by the light entering through the viewfinder. In such a case, use the AE
3
59
3
1
Press
D
in standby mode.
The Drive Mode screen appears.
2
Select
Z
and press
B
.
3
Use
CD
to select
Z
or
b
, and press
E
.
Z Continuously takes pictures at high speed.
b Continuously takes pictures at low speed.
The camera returns to standby mode.
t
Memo
• When [AF Mode] is set to x , the focus position is locked in the first frame.
1
Press
D
in standby mode.
The Drive Mode screen appears.
2
Select
O
and press
B
.
3
Use
CD
to select
O
,
P
, or
Y
.
O
P
Y
Releases the shutter after about 12 seconds.
Releases the shutter after about 2 seconds.
Continuously takes pictures. (The shutter is released after about 12 seconds.)
Proceed to Step 7 when O or P is selected.
4
Press
G
.
5
Use
CD
to set [Shooting
Speed] and [Number of
Shots].
3 times
6
Press
E
.
The screen of Step 2 reappears.
7
Press
E
.
The camera returns to standby mode.
8
Press
0
halfway, and then fully.
The shutter is released after about 12 seconds or 2 seconds.
60
1
Press
D
in standby mode.
The Drive Mode screen appears.
2
Select
Q
and press
B
.
3
Use
CD
to select
Q
,
R
, or
S
.
R
S
Releases the shutter after about 3 seconds.
Continuously takes pictures.
Proceed to Step 7 when Q or R is selected.
4
Press
G
.
5
Use
CD
to set [Shooting
Speed].
8
Press
0
halfway.
9
Point the remote control unit towards the remote control receiver on the front of the camera, and press the shutter release button on the remote control unit.
t
Memo
• The maximum operating distance of the remote control unit is approx. 4 m from the front of the camera.
• To adjust focus with remote control, set in [21 AF with Remote
Control] of the E 3 menu.
• When using the Remote Control Waterproof O-RC1, the autofocus system can be operated with the q button on the remote control unit. The r button cannot be used.
3
6
Press
E
.
The screen of Step 2 reappears.
7
Press
E
.
The camera returns to standby mode.
61
3
1
Press
D
in standby mode.
The Drive Mode screen appears.
2
Select
T
and press
B
.
3
Use
CD
to select
T
,
1
, or
U
.
1 Takes pictures with the self-timer.
U Takes pictures with remote control.
Proceed to Step 7 when T is selected.
4
Press
G
.
5
Use
CD
to select the operation mode.
±0.3EV
OK
6
Press
E
.
The screen of Step 2 reappears.
7
Set the bracket value.
Available operations
R Changes the bracket value (up to ±3
EV).
J
R Adjusts the exposure compensation value.
M Resets the compensation value to the default setting.
8
Press
E
.
The camera returns to standby mode.
9
Take three pictures.
After three pictures are taken, the camera returns to standby mode in Step 8.
t
Memo
• The bracket value can be set in increments of 1/3 EV steps or
1/2 EV steps according to the [1 EV Steps] setting of the E 1 menu.
• The following settings for the Bracketing can be set in the E 2 menu.
8 Bracketing Order
9 One-Push Bracketing
Changes the shooting order of the three pictures.
Takes all three pictures with one release of the shutter.
62
1
Press
D
in standby mode.
The Drive Mode screen appears.
2
Select
V
and press
B
.
0002 times
3
Use
CD
to select
V
,
z
,
W
, or
X
.
z Continuously takes pictures.
W
Takes pictures with the self-timer.
X Takes pictures with remote control.
Proceed to Step 7 if you do not need to change the shooting conditions.
4
Press
G
.
5
Set the shooting conditions.
Composite Mode
Select from [Average], [Additive], or
[Bright].
Number of Shots
Select from 2 to 2000 times.
Shooting Speed/
Self-timer/
Remote Control
Select the operation mode.
6
Press
E
.
The screen of Step 2 reappears.
7
Press
E
.
The camera returns to standby mode.
8
Shoot.
Instant Review is displayed.
Available operations during Instant Review
L
F
Discards pictures taken up to that point and takes pictures again from the first picture.
Saves pictures taken up to that point and displays the A menu.
After the specified number of shots are taken, the camera returns to standby mode in Step 7.
t
Memo
• Composite images are created as follows in each Composite
Mode.
Average
Additive
Bright
Creates a composite image with the average exposure.
Creates a composite image with the cumulatively added exposure.
Creates a composite image replacing only the portions that are brighter compared with the first image.
63
3
3
1
Press
D
in standby mode.
The Drive Mode screen appears.
2
Select
q
and press
B
.
3
Use
CD
to select
q
,
r
, or
s
.
r Takes pictures with the self-timer.
s
Takes pictures with remote control.
Proceed to Step 7 if you do not need to change the shooting conditions.
4
Press
G
.
5
Set the shooting conditions.
Interval
Standby Interval
Select from 2 seconds to 24 hours.
Select from the minimum time or 1 second to 24 hours.
Number of Shots
Select from 2 to 2000 times.
Start Interval
Select whether to take the first picture now or at a set time.
Start Time
Set the shooting start time when
[Start Interval] is set to [Set Time].
Self-timer/
Remote Control
Select the operation mode.
6
Press
E
.
The screen of Step 2 reappears.
7
Press
E
.
The camera returns to standby mode.
8
Shoot.
When [Start Interval] is set to [Now], the first picture is taken. When set to [Set Time], shooting starts at the set time.
To cancel shooting, press F in standby mode.
After the specified number of shots are taken, the camera returns to standby mode in Step 7.
64
t
Memo
• A new folder is created when Interval Shooting is performed, and the captured images are saved there. When shooting in another drive mode after performing Interval Shooting, another new folder is created.
• The shortest time that can be set for [Interval] is 5 seconds for
[Digital Filter] and [Clarity Enhancement], and 10 seconds for
[HDR Capture] and Y mode.
• For Interval Shooting, Interval Composite, and Interval Movie
Record, the second and later exposures start at the interval set in [Interval]. If the exposure time is longer than the time set in [Interval], some of the pictures that are supposed to be taken at the set interval are not actually taken. For example, if the time set in [Interval] is 2 seconds and the exposure time is 3 seconds, the first exposure has not yet finished at the time the second exposure is supposed to be started (2 seconds after shooting has started), and so the second picture is not taken. As a result, Interval Shooting ends before the specified number of shots are taken. In such cases, you can set [Standby Interval] in [10 Interval Shooting Options] of the E 2 menu so that pictures are taken at the set interval after each exposure ends. The screen displayed in Step 5 varies depending on the [10 Interval Shooting Options] setting.
• For Interval Shooting and Interval Composite, the focus position used when the first picture is taken is locked. When performing autofocus for each exposure, set [11 AF in
Interval Shooting] to [Adjusts focus for each shot] in the E 2 menu.
Star and moon trails can be captured in one image.
1
Press
D
in standby mode.
The Drive Mode screen appears.
2
Select
t
and press
B
.
00 : 00´02˝
0002
3
Use
CD
to select
t
,
u
, or
v
.
u
Takes pictures with the self-timer.
v Takes pictures with remote control.
Proceed to Step 7 if you do not need to change the shooting conditions.
4
Press
G
.
5
Set the shooting conditions.
0002 times
3
65
3
66
Interval
Standby Interval
Select from 2 seconds to 24 hours.
Select from the minimum time or 1 second to 24 hours.
Number of Shots
Select from 2 to 2000 times.
Start Interval
Select whether to take the first picture now or at a set time.
Start Time
Composite Mode
Save Process
Set the shooting start time when
[Start Interval] is set to [Set Time].
Select from [Average], [Additive], or
[Bright].
Select
Z
to save images in the middle of processing.
Self-timer/
Remote Control
Select the operation mode.
6
Press
E
.
The screen of Step 2 reappears.
7
Press
E
.
The camera returns to standby mode.
8
Shoot.
When [Start Interval] is set to [Now], the first picture is taken.
When set to [Set Time], shooting starts at the set time.
To cancel shooting, press F in standby mode.
After the specified number of shots are taken, the camera returns to standby mode in Step 7.
t
Memo
• When [Save Process] is set to Z , a new folder is created and the composite image is saved there. When shooting in another drive mode after performing Interval Composite, another new folder is created.
• Mount the camera on a tripod during shooting.
In C mode, you can use [Interval Movie Record] to take still pictures at a set interval from a set time and save them as a single movie file (Motion JPEG, file extension: .AVI).
1
Turn the main switch to
C
and press
D
.
The Drive Mode screen appears.
2
Select
q
and press
B
.
00 : 00´02˝
0008
3
Use
CD
to select
q
,
r
, or
s
.
r Records a movie with the self-timer.
s Records a movie with remote control.
Proceed to Step 7 if you do not need to change the shooting conditions.
4
Press
G
.
5
Set the shooting conditions.
0008 times
Recorded Pixels
Select from z
, u
, or t
.
Interval
Standby Interval
Number of Shots
Select from 2 seconds to 24 hours.
Select from the minimum time or 1 second to 24 hours.
Select from 8 to 2000 times. (When
[Recorded Pixels] is set to z , select from 8 to 500 times.)
Start Interval
Start Time
Select whether to take the first picture now or at a set time.
Set the shooting start time when
[Start Interval] is set to [Set Time].
Self-timer/
Remote Control
Select the operation mode.
6
Press
E
.
The screen of Step 2 reappears.
7
Press
E
.
The camera returns to standby mode.
8
Shoot.
When [Start Interval] is set to [Now], the first picture is taken.
Instant Review is displayed, and then the monitor turns off.
To cancel shooting, press F in standby mode.
After the specified number of shots are taken, the camera returns to standby mode in Step 7.
u
Caution
• [Movie SR] is fixed to [Off].
• [Recording Sound Level] is fixed to [Mute].
t
Memo
• The shortest time that can be set for [Interval] is 5 seconds for
[Digital Filter] and [Clarity Enhancement], and 10 seconds for
[HDR Capture].
In C mode, you can use [Star Stream] to take still pictures at a set interval from a set time and save them as a single movie file
(Motion JPEG, file extension: .AVI) using the Bright composite mode of Interval Composite.
Star and moon trails can be captured as a movie file.
1
Turn the main switch to
C
and press
D
.
The Drive Mode screen appears.
2
Select
w
and press
B
.
3
Use
CD
to select
w
,
x
, or
y
.
x Records a movie with the self-timer.
y Records a movie with remote control.
Proceed to Step 7 if you do not need to change the shooting conditions.
4
Press
G
.
5
Set the shooting conditions.
3
67
3
68
Recorded Pixels
Select from z , u , or t .
Standby Interval
Select from the minimum time or 1 second to 24 hours.
Number of Shots
Select from 8 to 2000 times. (When
[Recorded Pixels] is set to z , select from 8 to 500 times.)
Start Interval
Start Time
Fade-out
Select whether to take the first picture now or at a set time.
Set the shooting start time when
[Start Interval] is set to [Set Time].
Select the fade-out effect level of light trails from Off, Low, Medium, or High.
Self-timer/
Remote Control
Select the operation mode.
6
Press
E
.
The screen of Step 2 reappears.
7
Press
E
.
The camera returns to standby mode.
8
Shoot.
When [Start Interval] is set to [Now], the first picture is taken.
When set to [Set Time], shooting starts at the set time.
To cancel shooting, press F in standby mode.
After the specified number of shots are taken, the camera returns to standby mode in Step 7.
u
Caution
• [Movie SR] is fixed to [Off].
• [Recording Sound Level] is fixed to [Mute].
t
Memo
• The camera operates in L mode regardless of the mode dial setting.
• Mount the camera on a tripod during shooting.
1
Press
B
in standby mode.
The White Balance setting screen appears.
2
Select the desired white balance setting.
WB±
Cancel g
Auto White Balance
u
Multi Auto White Balance
h
Daylight
i
Shade
j
Cloudy
k q
Fluorescent - Daylight Color
r
Fluorescent - Daylight White
s
Fluorescent - Cool White
t
Fluorescent - Warm White
l
Tungsten
m
Flash
n
Color Temperature Enhancement
o
Manual White Balance
p
Color Temperature
Available operations when shooting with the viewfinder
R Selects the type of [Fluorescent].
P
J
Uses Digital Preview to preview the background image with the white balance setting applied.
Saves the preview image (only when the image can be saved).
Proceed to Step 5 if you do not need to fine-tune the white balance.
3
Press
G
.
The fine-tuning screen appears.
u
Caution
• The Digital Preview operation in Step 2 cannot be performed when the drive mode is set to [Multi-exposure], [Interval
Shooting], or [Interval Composite].
t
Memo
• When u is set, even if various light sources are present at the shooting location, the camera automatically adjusts the white balance according to the light source of each area. ( u is not available in C mode.)
• The following settings for the white balance can be set in the
E 2-3 menus.
12 WB Adjustable Range
Fixed, Auto Adjustment
13 WB When Using Flash
Auto White Balance, Multi
Auto White Balance, Flash,
Unchanged
14 AWB in Tungsten Light
Strong Correction, Subtle
Correction
15 Color Temperature Steps
Kelvin, Mired
3
Available operations
AB
Adjust: Green-Magenta
CD
M
Adjust: Blue-Amber
Resets the adjustment value to the default setting.
4
Press
E
.
The screen of Step 2 reappears.
5
Press
E
.
The camera returns to standby mode.
69
3
You can measure the white balance at a selected location.
1
Select
o
in Step 2 of
WB±
Cancel
2
Under the light you wish to measure the white balance of, select a white area as the subject, and press
0
fully.
The captured image is displayed.
3
Use
ABCD
to specify the measuring area.
Press
M
to return the measuring area to the center.
70
4
Press
E
.
The White Balance setting screen reappears.
[The operation could not be completed correctly] appears when measuring is unsuccessful. Press E to remeasure the white balance and return to Step 3.
t
Memo
• You can copy the white balance settings of a captured image and save them as manual white balance settings in [Save as
Manual WB] of the playback mode palette. (p.77)
Specify the white balance with the color temperature.
1
Select
p
in Step 2 of “Setting the White
2
Press
G
.
3
Adjust the color temperature.
Set the color temperature value within the range from 2500K to
10000K.
Available operations
Q
Changes the color temperature in increments of 100 Kelvin.
R
Changes the color temperature in increments of 1000 Kelvin.
ABCD
Fine-tunes the color temperature.
4
Press
E
.
The White Balance setting screen reappears.
t
Memo
• Select [Mired] in [15 Color Temperature Steps] of the
E
3 menu to set the color temperature in mired units. The color temperature can be changed in 20 mired units with
Q
, and
100 mired units with R . However, figures are converted to and displayed in Kelvin.
When you want to take pictures with a slightly different style, you can set the desired picture style before shooting.
Try out the various settings, and find your best picture style.
v
A
1
Select [Custom Image] in the control panel, and press
E
.
The Custom Image setting screen appears.
2
Select an image finishing tone.
Available operations when shooting with the viewfinder
P Uses Digital Preview to preview the background image with the selected setting applied.
J Saves the preview image (only when the image can be saved).
Proceed to Step 6 if you do not need to change the parameters.
3
Press
G
.
The parameter setting screen appears.
4
Set the parameters.
3
Bright
Natural
Portrait
Landscape
Vibrant
Radiant
Muted
Bleach Bypass
Reversal Film
Monochrome
Cross Processing
Available operations
AB
Selects a parameter.
CD
R
Adjusts the value.
Switches between [Sharpness] and [Fine
Sharpness]. (Not available in
C
mode)
M
Resets the adjustment value to the default setting.
5
Press
E
.
The screen of Step 2 reappears.
71
3
6
Press
E
.
The control panel reappears.
7
Press
F
.
The camera returns to standby mode.
u
Caution
• This function is not available when in R or S mode.
• The Digital Preview operation in Step 2 cannot be performed when the drive mode is set to [Multi-exposure], [Interval
Shooting], or [Interval Composite].
Saving the Cross Processing Settings of a
Captured Image
The outcome of Cross Processing varies each time a picture is taken. If you take a cross processed image that you like, you can save the Cross Processing settings used in the image so that you can repeatedly use the same settings.
1
Press
B
in single image display of playback mode.
The playback mode palette appears.
2
Select
j
and press
E
.
The camera searches for cross processed images starting from the most recent image taken.
[No cross processed image] appears if there are no cross processed images.
3
Use
Q
to select a cross processed image.
4
Select the “Favorite” number 1, 2 or 3 to save the settings, and press
E
.
The settings of the selected image are saved as your
“Favorite” settings.
t
Memo
• The saved Cross Processing settings can be loaded by
selecting [Cross Processing] in Step 2 of “Custom Image”
(p.71), and selecting one of the Favorite settings 1 to 3 for the
parameter.
72
v
A
C
1
Select [Digital Filter] in the control panel, and press
E
.
The Digital Filter setting screen appears.
2
Select a filter.
Select [No Filter] to not shoot with a digital filter.
4
Set the parameters.
Extract Color
Replace Color
Toy Camera
Retro
High Contrast
Shading
Invert Color
Unicolor Bold
Bold Monochrome
Available operations when shooting with the viewfinder
P Uses Digital Preview to preview the background image with the selected effect applied.
J Saves the preview image (only when the image can be saved).
Proceed to Step 6 if you do not need to change the parameters.
3
Press
G
.
The parameter setting screen appears.
Available operations
AB
Selects a parameter.
CD
Adjusts the value.
5
Press
E
.
The screen of Step 2 reappears.
6
Press
E
.
The control panel reappears.
7
Press
F
.
The camera returns to standby mode.
u
Caution
• This function cannot be used in some capture modes or in
combination with some other functions. (p.110)
• The Digital Preview operation in Step 2 cannot be performed when the drive mode is set to [Multi-exposure], [Interval
Shooting], or [Interval Composite].
• Depending on the filter used, it may take longer to save images.
t
Memo
• Images can also be processed with digital filters in playback
3
73
3
Highlight Correction/Shadow Correction
v
A
Expands the dynamic range and enables a wider range of tones to be recorded by the CMOS sensor and reduces the occurrence of overexposed/underexposed areas.
Set in the control panel or [D-Range Settings] of the A 2 menu.
HDR Capture
v
A
C
Takes three consecutive images at three different exposure levels to create a single composite image with them.
1
Select [HDR Capture] in the control panel, and press
E
.
The [HDR Capture] screen appears.
2
Use
CD
to select the type.
3
Press
B
, and use
CD
to set the range in which to change the exposure.
4
Press
E
.
The control panel reappears.
5
Press
F
.
The camera returns to standby mode.
u
Caution
• This function cannot be used in some capture modes or in
combination with some other functions. (p.110)
• [File Format] is fixed to [JPEG]. When [File Format] is set to
[RAW] or [RAW+], the setting is changed to [JPEG].
• For HDR Capture, multiple images are combined together to create a single image, so it may take time to save the image.
• In
C
mode, this function is available only when the drive mode is set to [Interval Movie Record].
74
u
Caution
• When the sensitivity is set to less than ISO 200, [Highlight
Correction] cannot be set to [On].
t
Memo
• [Highlight Correction] in C mode can be set to [Auto] or [Off].
t
Memo
• In Y mode or when k of S mode is selected, specific HDR settings are used and HDR Capture cannot be set.
• The Auto Align feature can be set if you access [HDR
Capture] from the A 1 menu.
• When the drive mode is set to [Interval Shooting], [Auto Align] is fixed to [Off].
The following features can be set in
[Lens Correction] of the A 2 menu.
v
A
Distortion
Correction
Peripheral
Illumin. Corr.
Lat-Chromatic-
Ab Adj
Diffraction
Correction
Reduces distortions occurring due to lens properties.
Reduces peripheral light fall-off occurring due to lens properties.
Reduces lateral chromatic aberrations occurring due to lens properties.
Corrects blur caused by diffraction when using a small aperture.
t
Memo
• You can also set [Distortion Correction] and [Peripheral
Illumin. Corr.] from the control panel.
• Corrections can only be made when a compatible lens is
attached. (p.113) The features are disabled when using an
accessory such as a rear converter that is attached between the camera and the lens.
• When [File Format] is set to [RAW] or [RAW+], correction information is saved as a RAW file parameter and you can select whether to apply the correction to the images when developing them. For the RAW Development function, [Color
Fringe Correction] can also be set. (p.87)
3
75
v
A
By shaking the Shake Reduction unit, a moiré reduction effect simulating that of a low-pass filter can be achieved.
Set in the control panel or [AA Filter
Simulator] of the A 3 menu.
Images with the texture and surface details enhanced can be captured.
Set in the control panel or [Clarity
Enhancement] of the A 2/ C 1 menu.
v
A
C
3
Type1
Type2
Bracketing
Takes pictures balancing the resolution and moiré reduction.
Prioritizes moiré reduction.
Takes consecutive 3 images in order of [Off],
[Type1], and [Type2] (3 images are taken with one press of 0 ).
u
Caution
• This function cannot be used in some capture modes or in
combination with some other functions. (p.110)
• [Bracketing] cannot be used in the following situations.
• When e
, o
, or p
of
S
mode is selected
• In M mode
• When the drive mode is set to other than [Single Frame
Shooting], [Self-timer] (12 seconds, 2 seconds), or
[Remote Control] (now, after 3 seconds)
• When HDR Capture is set
• When the number of storable images is 2 or less u
Caution
• This function cannot be used in combination with some other
• In
C
mode, this function is available only when the drive mode is set to [Interval Movie Record].
76
Playback functions can be set from the playback mode palette as well as the B
Press B in single image display of the playback mode to display the playback mode palette.
a b c d e f h i
Item
Image
Rotation
Digital Filter
Color Moiré
Correction
Protect
Cropping
Slideshow
Save as Manual
WB
Function
Changes the rotation information of images.
Processes images with digital filters.
Reduces color moiré in images.
Changes the number of recorded pixels of the image.
Crops out only the desired area of an image.
Protects images from being accidentally erased.
Plays back images one after another.
Saves the white balance settings of the captured image as Manual White
Balance.
Page
j k l
Item
Save Cross
Processing
RAW
Development
Function
Saves the settings used for an image captured in Cross
Processing mode of Custom
Image as your “Favorite” settings.
Develops RAW images into
JPEG images and saves them as new files.
Divides a movie or deletes unwanted segments.
*1 Not available when a movie is displayed.
*2 Not available when a RAW image is displayed.
*3 Available only when a RAW image is saved.
*4 Available only when a movie is displayed.
Page
4
77
4
You can display 6, 12, 20, 35 or 80 thumbnail images at the same time.
1
Turn
R
to the left in playback mode.
The multi-image display screen appears.
Available operations
ABCD
Moves the selection frame.
Q
G
Shows the next/previous page.
Shows the display style selection screen.
L
Deletes the selected images.
2
Press
E
.
The selected image appears in single image display.
78
Deleting Selected Images
1
Press
L
in Step 1 of “Displaying Multiple
2
Select the images to delete.
Available operations
ABCD
Moves the selection frame.
E
J
R
Confirms/cancels the selection of the image to delete.
Selects the range of images to delete.
Shows the selected image in single image display.
Use CD to select a different image.
In the upper left area of the monitor, the number of selected images is displayed.
3
Press
L
.
The delete confirmation screen appears.
4
Select [Delete] and press
E
.
t
Memo
• You can select up to 500 images at a time.
• Protected images cannot be selected.
• You can delete the images selected individually along with the images selected by specifying the range to delete.
• Use the same steps to select multiple images for the following functions.
1
Turn
R
to the left in Step
The folder display screen appears.
Available operations
ABCD
Moves the selection frame.
L
Deletes the selected folder.
2
Press
E
.
The images in the selected folder are displayed.
Deleting a Folder
1
Select the folder to delete in Step 1 of
“Displaying Images by Folder” (p.79), and press
L
.
The delete confirmation screen appears.
2
Select [Delete] and press
E
.
The selected folder and all the images in it are deleted.
When there are protected images in the folder, select
[Delete all] or [Leave all].
Images are grouped and displayed by shooting date.
1
Press
G
in Step 1 of “Displaying Multiple
The display style selection screen appears.
2
Select [Calendar Filmstrip
Display].
2015.2
THU
SAT
MON
FRI
12
14
23
THU
TUE
11
12
24
Shooting date
Thumbnail
Available operations
AB
Selects a shooting date.
CD
R
to the right
Selects an image taken on the selected shooting date.
Shows the selected image in single image display.
L
Deletes the selected image.
3
Press
E
.
The selected image appears in single image display.
79
4
1
Select
h
in the playback mode palette.
Slideshow starts.
4
Available operations
E
Pauses/resumes playback.
C
D
Displays the previous image.
Displays the next image.
B
R
Stops playback.
Adjusts the volume of the movie.
After all images are played back, the camera returns to single image display.
t
Memo
• You can change the [Display Duration], [Screen Effect],
[Repeat Playback], and [Auto Movie Playback] settings for slideshow in [Slideshow] of the B 1 menu. Slideshow can also be started from the Slideshow setting screen.
When you take pictures with the camera held vertically, image rotation information is saved when shooting. When [Auto Image
Rotation] in the B 1 menu is set to [On], the image is automatically rotated based on the rotation information during playback (default setting).
The rotation information of an image can be changed by following the procedure below.
1
Display the image to edit in single image display.
2
Select
a
in the playback mode palette.
The selected image is rotated in 90° increments and the four thumbnail images are displayed.
3
Use
ABCD
to select the desired rotation direction and press
E
.
The image rotation information is saved.
u
Caution
• When [24 Save Rotation Info] is set to [Off] in the
E
4 menu, image rotation information is not saved when shooting.
• You cannot change the rotation information in the following cases.
• Protected images
• Images without a rotation information tag
• Movie files cannot be rotated.
80
Connect to an AV device, such as a TV, equipped with an HDMI terminal to display Live View images while shooting or to play back images in playback mode.
Make sure to have a commercially available HDMI cable equipped with an HDMI terminal (type D).
1
Turn the AV device and camera off.
2
Open the terminal cover of the camera, and connect the cable to the HDMI terminal.
u
Caution
• While the camera is connected to an AV device, nothing is displayed on the camera monitor regardless of the LCD screen direction. Also, you cannot adjust the volume on the camera. Adjust the volume on the AV device.
t
Memo
• Check the operating manual of the AV device and select a suitable input terminal for connecting the camera.
• By default, the maximum resolution supported by both the AV device and camera is automatically selected. If it fails to play back images properly, change the setting in [HDMI Out] of the
D 2 menu.
• If you intend to use the camera continuously for a long period, the use of the optional AC adapter kit is recommended.
4
3
Connect the other end of the cable to the input terminal on the AV device.
4
Turn the AV device and camera on.
The camera turns on in HDMI mode, and the camera information is displayed on the screen of the connected AV device.
81
4
Connect the camera to a computer using a USB cable.
Make sure to have a commercially available USB cable equipped with a micro B terminal.
1
Turn the computer on.
2
Turn the camera off.
3
Open the terminal cover of the camera, and connect the USB cable to the USB terminal.
4
Connect the USB cable to the USB port of the computer.
5
Turn the camera on.
The camera is recognized as a removable disk.
The E lamp of the camera blinks slowly.
6
Save the captured images to the computer.
7
Disconnect the camera from the computer.
u
Caution
• The camera cannot be operated while it is connected to a computer. To operate the camera, terminate the USB connection on the computer, then turn off the camera and remove the USB cable.
• If the “K-S2” dialog appears on the computer screen in Step
5, select [Open folder to view files] and click the OK button.
t
Memo
• Refer to “Operating Environment for USB Connection and
Provided Software” (p.129) for system requirements to
connect the camera to a computer and to use the software.
• The USB connection mode when connecting the camera to a computer can be set in [USB Connection] of the D 2 menu.
Normally, you do not need to change the default setting
([MSC]).
• If you intend to use the camera continuously for a long period, the use of the optional AC adapter kit is recommended.
82
u
Caution
• Only JPEG images captured with this camera can be resized or cropped.
• Images already resized or cropped to the minimum file size cannot be processed.
Changing the Number of Recorded Pixels (Resize)
Changes the number of recorded pixels of the selected image, and saves it as a new file.
1
Display the image to edit in single image display.
2
Select
d
in the playback mode palette.
The screen to select the number of recorded pixels appears.
3
Use
CD
to select the number of recorded pixels and press
E
.
You can select an image size smaller than that of the original image.
The save confirmation screen appears.
4
Select [Save] and press
E
.
Crops out only the desired area of the selected image and saves it as a new file.
1
Cropping Out Part of the Image (Cropping)
Display the image to edit in single image display.
2
Select
e
in the playback mode palette.
The cropping frame to specify the size and position of the area to crop appears on the screen.
3
Specify the size and position of the area to crop by using the cropping frame.
Available operations
R
Changes the size of the cropping frame.
ABCD
G
M
Moves the cropping frame.
Changes the aspect ratio or Image
Rotation setting.
Rotates the cropping frame (only when possible).
4
Press
E
.
The save confirmation screen appears.
5
Select [Save] and press
E
.
4
83
4
Reduces color moiré in images.
1
Display the image to edit in single image display.
2
Select
c
in the playback mode palette.
If the image cannot be edited, [This image cannot be processed] appears.
3
Use
CD
to select the correction level and press
E
.
The save confirmation screen appears.
4
Select [Save] and press
E
.
u
Caution
• The Color Moiré Correction function can be used only for the
JPEG images captured with this camera.
1
Display the image to edit in single image display.
2
Select
b
in the playback mode palette.
The screen to select a digital filter appears.
3
Select a filter.
Use Q to select a different image.
100-0001
Base Parameter Adj
Base Parameter Adj
Extract Color
Replace Color
Toy Camera
Retro
High Contrast
Shading
Invert Color
Unicolor Bold
Bold Monochrome
Tone Expansion
Sketch
Water Color
Pastel
Posterization
Miniature
Soft
Starburst
Fish-eye
Slim
Monochrome
Proceed to Step 7 if you do not need to change the parameters.
4
Press
G
.
The parameter setting screen appears.
84
5
Set the parameters.
Available operations
AB
Selects a parameter.
CD
Adjusts the value.
6
Press
E
.
The screen of Step 3 reappears.
7
Press
E
.
The save confirmation screen appears.
8
Select [Apply additional filter(s)] or [Save] and press
E
.
Select [Apply additional filter(s)] when you want to apply additional filters to the same image. The screen of Step 3 reappears.
u
Caution
• Only JPEG and RAW images captured with this camera can be edited with the digital filters.
t
Memo
• Up to 20 filters, including the digital filter used during shooting
(p.73), can be applied to the same image.
Recreating Filter Effects
Retrieves the filter effects of the selected image and applies the same filter effects to other images.
1
Display a filter-processed image in single image display.
2
Select
b
in the playback mode palette.
3
Select [Recreating filter effects] and press
E
.
The filter effects used for the selected image appear.
4
To check the parameter details, press
G
.
Press
G
again to return to the previous screen.
11
22
33
44
5
Press
E
.
The image selection screen appears.
6
Use
Q
to select an image for applying the same filter effects, and press
E
.
You can only select an image that has not been processed with a filter.
The save confirmation screen appears.
55
66
77
88
99
10
11
12
--
--
--
--
14
15
--
--
17
18
19
20
--
--
--
--
85
4
7
Select [Save] and press
E
.
t
Memo
• If [Searching for original image] is selected in Step 3, the original image prior to digital filter application can be retrieved.
4
86
1
Display the movie to edit in single image display.
2
Select
l
in the playback mode palette.
The movie editing screen appears.
3
Select the point where you want to divide the movie.
The frame at the dividing point is displayed at the top of the screen.
Up to four points can be selected to divide the original movie into five segments.
00 ' 00"
10 ' 00"
Available operations
A
D
Press and hold D
C
Press and hold C
R
G
Plays back/pauses a movie.
Forwards a frame (when paused).
Fast-forwards playback.
Reverses a frame (when paused).
Fast-reverses playback.
Adjusts the volume.
Confirms/cancels a dividing point.
Proceed to Step 7 if you do not want to delete any segment.
4
Press
L
.
The screen to select the segments to delete is displayed.
5
Use
CD
to move the selection frame and press
E
.
The segments to delete are specified. (Multiple segments can be deleted at once.)
Press E again to cancel the selection.
00 ' 05"
10 ' 00"
6
Press
F
.
The screen of Step 3 reappears.
7
Press
E
.
The save confirmation screen appears.
8
Select [Save] and press
E
.
u
Caution
• Select dividing points in chronological order from the beginning of the movie. When canceling the selected dividing points, cancel each of them in reverse order (from the end of the movie to the beginning). In an order other than specified, you can neither select dividing points nor cancel the selections of the dividing points.
You can develop RAW images into JPEG images, and save them as new files.
1
Select
k
in the playback mode palette.
The screen for selecting a RAW image processing option appears.
2
Select the desired option and press
E
.
Select single image
Select multiple images
Select a folder
Develops an image.
Develops up to 500 images with the same settings.
Develops up to 500 images in the selected folder with the same settings.
When [Select single image] is selected, proceed to Step 6.
The image/folder selection screen appears.
3
Select the image(s) or a folder.
Refer to Step 2 of “Deleting Selected Images” (p.78) for how
to select the image(s).
4
Press
G
.
The screen for selecting the parameter setting method appears.
5
Select the parameter setting method and press
E
.
Develop images as shot
Develop images with modified settings
Allows you to change Image Capture
Settings (JPEG Recorded Pixels and
JPEG Quality).
Allows you to change Image Capture
Settings (Aspect Ratio, JPEG Recorded
Pixels, JPEG Quality, Color Space),
Lens Correction (Distortion Correction,
Peripheral Illumin. Corr., Lat-Chromatic-
Ab Adj, Diffraction Correction, Color
Fringe Correction), Digital Filter, White
Balance, Custom Image, Clarity
Enhancement, Sensitivity, High-ISO NR, and Shadow Correction.
6
Set the parameters.
4
87
4
Available operations
AB
Selects a parameter.
CD
Q
Changes the value.
Selects a different image (when in single image display).
For Image Capture Settings and Lens Correction, press D and use AB to select an item.
For Digital Filter, White Balance, and Custom Image, press
D to display the setting screen.
7
Press
E
.
The save confirmation screen appears.
8
Select [Save] and press
E
.
When [Select single image] is selected, select [Continue] or
[Exit], and press E .
u
Caution
• Only RAW images captured with this camera can be developed.
• The parameters [Digital Filter] and [Clarity Enhancement] cannot be set at the same time.
t
Memo
• When [Select multiple images] or [Select a folder] is selected in Step 2, a folder with a new number is created, and the
JPEG images are stored in it.
• With the provided software “Digital Camera Utility 5”, you can develop RAW files on a computer.
88
This camera has a built-in Wi-Fi function. By directly connecting to a communication device such as a smartphone or tablet via wireless LAN, the camera can be operated from the communication device and images can be shared with others via social networks or e-mail.
The Wi-Fi function is disabled at the time of turning the camera on. Enable the function using one of the following methods.
• Setting from the menus (p.89)
• Pressing the self-portrait shutter button (p.90)
• Touching a communication device (p.90)
t
Memo
• When the Wi-Fi function is enabled, the k (white) icon indicating the wireless LAN status is displayed on the status screen and Live View screen. When l (gray) is displayed, a connection with the access point was not made correctly.
• Even after the Wi-Fi function is enabled, it is disabled again when the camera is turned off and on again. Also, when the camera enters C mode, the Wi-Fi function is disabled.
• Auto Power Off is not available while a Wi-Fi connection is established or images are being transferred. If Auto Power
Off is activated while a connection is not established or during standby, the Wi-Fi function is disabled. The function is enabled when the camera recovers from Auto Power Off.
• The Wi-Fi function is disabled during the USB connection.
u
Caution
• Do not attempt to use the Wi-Fi function in a location where the use of wireless LAN devices is restricted or prohibited, such as on airplanes.
• When using the Wi-Fi function, please observe local laws and regulations governing radio communication.
• If a memory card with a built-in wireless LAN function (such as an Eye-Fi card or a Flucard) is used, radio wave interference may occur. When this occurs, disable the Wi-Fi function of the camera.
1
Select [Wi-Fi] in
D
3 menu and press
D
.
The [Wi-Fi] screen appears.
2
Set [Action Mode] to [ON].
Select [OFF] to disable the Wi-Fi function.
D
3
Press
F
twice.
t
Memo
• In Step 2, select [Communication Info] to check the SSID,
Password, and MAC Address of the wireless LAN. Or, select [Reset
Transfer Settings] to reset the settings to their default values.
5
89
1
Press and hold the selfportrait shutter button.
A beep sounds and [Wi-Fi enabled] appears on the screen.
5
2
Release the self-portrait shutter button.
To disable the Wi-Fi function, press and hold the selfportrait shutter button again.
u
Caution
• When the self-portrait shutter button lamp is lit green or red, it functions as the shutter release button. In such cases, use another method to turn the Wi-Fi function on or off.
When this camera comes into contact with a communication device equipped with the NFC function, the camera establishes
1
Lightly touch the communication device to the NFC mark of the camera.
A beep sounds and [Wi-Fi enabled] appears on the screen.
u
Caution
• To establish a Wi-Fi connection by touching a communication device, the Wi-Fi function and the NFC reader/writer function of the device must be enabled in advance. For details on how to operate the communication device, refer to the operating manual of the device.
t
Memo
• When the dedicated application “Image Sync” is installed on the communication device, the Wi-Fi function is enabled and
Image Sync is started at the same time by touch operation.
(p.94) When Image Sync is not installed, the download site for
the application is displayed on the communication device.
90
The following functions can be used by directly connecting the camera to a communication device via Wi-Fi and using the dedicated application “Image Sync”.
Remote
Capture
Image View
Displays the Live View image of the camera on the communication device, and then enables controlling the exposure settings and shooting by operating the communication device.
Displays the images saved on the memory card inserted in the camera on the communication device and imports the images to the communication device.
Image Sync supports iOS and Android. Image Sync can be downloaded from the App Store or Google Play Store. For supported OS and other details, refer to the download site.
t
Memo
• The Image Sync screenshots used in this manual are the ones under development and may differ from the actual display. The screen layout and elements may be also changed due to causes such as the version upgrade of the application.
• For details on how to operate the communication device, refer to the operating manual of the device.
Connect the camera and communication device via Wi-Fi, and start Image Sync installed on the communication device.
When an NFC-compatible Device is Used
1
Set the wireless LAN (Wi-Fi) function and the
NFC reader/writer function to ON on the communication device.
2
Lightly touch the communication device to the NFC mark of the camera.
A Wi-Fi connection is established between the camera and communication device.
Image Sync is started, and the list of images appears.
5
91
5
When a Non-NFC-compatible Device is Used
1
Set the wireless LAN (Wi-Fi) function to ON on the communication device.
2
Start Image Sync on the communication device.
The [Choose a Network] screen appears on the communication device.
3
Tap [PENTAX_xxxxxx] in the [Network List].
The [Enter Password] screen appears.
4
Enter the password, and tap [Connect].
A Wi-Fi connection is established between the camera and communication device.
The list of images appears on the
Image Sync screen.
t
Memo
• Refer to [Communication Info] in [Wi-Fi] of the D 3 menu for
92
When an iOS Device is Used
1
Set the wireless LAN (Wi-Fi) function to ON on the communication device.
Tap [PENTAX_xxxxxx] in the list of detected Wi-Fi networks.
2
Enter the password, and tap [Join].
A Wi-Fi connection is established between the camera and communication device.
Flick left or right on the screen to change screens.
Application image list Camera image list
5
3
Start Image Sync on the communication device.
Image Sync is started, and the list of images appears.
A
mode
t
Memo
• You can also change screens by tapping the buttons displayed at the bottom of each screen.
93
The Live View image of the camera and buttons for shooting are displayed on the shooting screen of Image Sync.
1
2
3
4
9
10
5
94
5
6
7
11
12
13
14
1
2
Capture mode
3
Live View
4
AF frame
5
White Balance, Shutter Speed, Aperture value, EV
Compensation, Sensitivity
6
Live View on/off
7
Operation modes
8
NFC connection screen
9
Battery level
10
Thumbnail of the last captured image
(When tapped, the camera image list is displayed.)
11
File Format, Image storage capacity
12
Drive Mode
13
Green button
14
Shutter button
Shooting Images
1
Configure the basic settings on the camera.
2
Check the Live View image on the shooting screen of
Image Sync.
3
Change the settings using
Image Sync as necessary.
Tap an item and select a value from the list.
t
Memo
• Shooting can also be performed by tapping the Live View
image. Set in [Touch AF] on the [Settings] screen. (p.98)
You can view the images saved either in the camera or in the communication device.
1
2
4
5
4
When the focus mode is set to
v
, tap an area where you want to perform autofocus in the Live
View image.
Autofocus is performed on the tapped area.
5
Tap the shutter release button.
The captured image is displayed as a thumbnail.
u
Caution
• Shooting with Image Sync is not available in the following situations.
• When the drive mode is set to other than [Single Frame
Shooting]
• In C mode
• When the camera is connected to a device via USB or
HDMI terminal
• When using the ASTROTRACER function
• The captured images are saved to the memory card inserted in the camera and to the communication device with Image
Sync. Shooting cannot be performed if there is not enough available space on the memory card.
3
1
Multiple image selection button
2
Album selector button
(available for the application image list only)
3
Operation modes
4
5
NFC connection screen
95
5
Tap the image to display the fullscreen image and shooting information.
Selecting the Image Storage Location
When viewing images in application image list display, you can select the image storage location (album) from [Application] or
[Gallery] (or [Camera Roll]).
1
Tap
4
.
5
Touch operations
Flick left/right
Pinch out/in
Shows the previous/next image.
Magnifies/Reduces the image.
2
Select the album.
The images in the selected album are displayed.
96
Selecting Multiple Images
1
Tap
5
.
4
Select the desired action.
2
Tap the images to select.
Blue check marks appear.
3
Touch and hold one of the selected images.
t
Memo
• When you touch and hold the desired image shown in list display or shooting information display, the same screen as
Step 4 appears and you can select the action to apply.
5
97
1
Tap
6
.
5
The [Settings] screen appears.
The following settings are available.
Touch AF
Recorded
Pixels
General
Settings
Sets whether to perform only autofocus or perform shooting after autofocus when touching the Live View image.
Changes the number of recorded pixels and the quality level.
Changes the communication settings and the display language.
2
Tap [General Settings] if you change the communication settings and the display language.
3
Tap the setting item to be changed.
98
Communication Settings
The password and wireless channel can be changed.
Device Information
Language
4
Change the settings and tap
1
.
5
99
A
6
Setting the E-dial Operation
For each exposure mode, you can set the functions for when
Q and R are turned and M is pressed.
1
Select [E-Dial Programming] in
A
4 menu and press
D
.
The [E-Dial Programming] screen appears.
2
Select an exposure mode and press
D
.
The screen for the selected exposure mode appears.
3
Press
D
and use
AB
to select the combination of functions for when
Q
and
R
are turned and
M
is pressed.
I
J
ISO e
X G
Change Shutter Speed
Change Aperture Value
Change Sensitivity
EV Compensation
Return to
G
Mode
100
G SHIFT
Program Shift
G
LINE
Program Line
--
Not available
4
Press
E
.
5
Press
F
.
The [E-Dial Programming] screen reappears.
Repeat Steps 2 to 5.
6
Press
F
twice.
t
Memo
• If you select [Rotation Direction] in Step 2, you can reverse the effect obtained by turning Q or R .
Setting the Button Operation
Set the functions for P , f , and the self-portrait shutter button.
1
Select [Button Customization] in
A
4 menu and press
D
.
The [Button Customization] screen appears.
2
Select the desired item and press
D
.
The screen to set the function for the selected item is displayed.
3
Press
D
and use
AB
to select the functions to assign.
The following functions can be assigned to each button.
Page
RAW/Fx
Button
Optical
Preview
Digital
Preview
Shake
Reduction
AF Active
Area
Setting
One Push File
Format
Bracketing
Function
Temporarily changes the file format.
Sets Bracketing shooting.
Activates the
Optical Preview to check the depth of field with the viewfinder.
Activates the Digital
Preview to check the composition, exposure and focus on the monitor.
(The maximum display time: 60 seconds)
You can magnify or save the preview image.
Turns the Shake
Reduction and
Movie SR functions on/off.
Enables changing the AF point.
–
AF/AE-L
Button
AF/AE-L
Button
(Movie)
Setting
Enable AF1
Enable AF2
Cancel AF
AE Lock
Function
Autofocus is performed when f is pressed.
Autofocus is performed when f is pressed and not when
0 is pressed halfway.
While f is pressed, the autofocus mode is set to w . Half press of 0 is disabled.
Locks the exposure setting.
Selfportrait
Shutter
Button
ON
Functions as the shutter release button when the LCD screen is pointed toward the subject.
OFF
4
Press
E
.
5
Press
F
.
The screen of Step 2 reappears.
Repeat Steps 2 to 5.
Always functions as the button to turn on/off Wi-Fi.
6
Press
F
twice.
Page
6
101
6
Setting the One Push File Format
Select the file format to change to when P is pressed for each [File Format] setting.
1
Set [RAW/Fx Button] to [One Push File Format] in
Step 3 of “Setting the Button Operation” (p.100).
2
Select
Z
or
Y
for [Cancel after 1 shot].
Z
Y
The recording format returns to the original file format after a picture is taken.
The setting is retained until any of the following operations is performed:
• When
P
is pressed again
• When 3 or F is pressed, or when the mode dial or main switch is turned
3
Select the file format when
P
is pressed.
The left side is the [File Format] setting and the right side is the changed file format when P is pressed.
Selecting the Display Settings for Digital Preview
Select the camera operation and type of information displayed on the monitor when Digital Preview is displayed by pressing
P .
1
Set [RAW/Fx Button] to [Digital Preview] in Step 3
of “Setting the Button Operation” (p.100).
2
Press
B
and select
Y
or
Z
for each display item.
102
A
Camera settings can be saved to O and P of the mode dial and used repeatedly.
The following settings can be saved.
Exposure Mode (
I
/
J
/
AF point
K
Sensitivity
EV Compensation
Flash Mode
/
L
/
M
G
)
/
H
/ Drive Mode
White Balance
A
1-4 menu settings
(with exceptions)
E
1-4 menu settings
Saving the Settings
1
Set the exposure mode and all of the settings to save.
2
Select [Save USER Mode] in
A
4 menu and press
D
.
The [Save USER Mode] screen appears.
3
Select [Save Settings] and press
D
.
The [Save Settings] screen appears.
4
Select [USER1] or [USER2] and press
D
.
5
Select [Save] and press
E
.
The screen of Step 3 reappears.
u
Caution
• [Save USER Mode] cannot be selected when the mode dial is set to R , S , or Y .
t
Memo
• The settings saved as the USER mode can be displayed on the monitor when you select [Check Saved Settings] in Step 3.
• To reset the settings to the default values, select [Reset
USER Mode] in Step 3.
Editing a Setting Name
You can change the name of the USER mode in which you saved settings.
1
Select [Rename USER Mode] in Step 3 of
“Saving the Settings” (p.103) and press
D
.
The [Rename USER Mode] screen appears.
2
Select [USER1] or [USER2] and press
D
.
The text-entry screen appears.
3
Change the text.
Up to 18 single-byte alphanumeric characters and symbols can be entered.
Text selection cursor
C D
..
,,
+
LM NO P Q R
U V WX
< > @
= $ %
‘‘ ““
{{ }}
-- _
:: ;;
!! ?? ** #
Finish
6
Text input cursor
103
6
Available operations
ABCD
Moves the text selection cursor.
R
J
E
Moves the text input cursor.
Switches between upper and lower case letters.
Enters a character selected with the text selection cursor at the position of the text input cursor.
L
Deletes a character at the position of the text input cursor.
4
After entering the text, move the text selection cursor to [Finish], and press
E
.
The [Rename USER Mode] screen reappears.
Using the Saved USER Mode
1
Set the mode dial to
O
or
P
.
The USER mode guide is displayed for about 3 seconds.
Use AB to check the saved settings.
FF
250
5.6
2
Change the settings as necessary.
The exposure mode can be
1
changed in [Exposure Mode] of the A 1 menu.
t
Memo
• The settings changed in Step 2 are not saved as the USER mode settings. When the camera is turned off, the camera returns to the originally saved settings. To change the original settings, save the USER mode settings again.
104
D
The date and time set at the time of initial setting (“Initial
Settings” (p.36)) serve as the date and time of your present
location and are reflected in the shooting date and time for images.
Setting the destination to a location other than your present location enables you to display the local date and time on the monitor when traveling abroad and also save images timestamped with the local date and time.
1
Select [World Time] in
D
1 menu.
The [World Time] screen appears.
2
Select the time you wish to display in [Time Setting].
Select F (Hometown) or G
(Destination).
3
Select [
G
Destination] and press
The [
G
Destination] screen appears.
4
Use
CD
to select a city.
Use
R
to change the region.
D
.
5
Select [DST] (daylight saving time), and use
CD
to select
Y
or
Z
.
6
Press
E
.
The screen of Step 2 reappears.
7
Press
F
twice.
t
Memo
• Refer to “List of World Time Cities” (p.128) for cities that can
be selected as a hometown or destination.
• Select [ F Hometown] in Step 3 to change the city and DST settings for the hometown.
• G appears in the control panel when [Time Setting] is set to
G
.
A
Most of the functions set on this camera are saved even if the camera is turned off. For the following function settings, you can select whether to save the settings ( Z ) or to return the settings to their default values ( Y ) when the camera is turned off.
Set in [Memory] of the A 4 menu.
Flash Mode
Drive Mode
White Balance
Custom Image
Sensitivity
EV Compensation
Flash Exposure Compensation
Digital Filter
HDR Capture
Clarity Enhancement
Shooting Info Display
Playback Info Display
t
Memo
• When [Reset] of the D 3 menu is performed, all Memory settings return to the default values.
6
105
6
You can protect images from being accidentally deleted.
u
Caution
• Even protected images are deleted if the inserted memory card is formatted.
1
Select
f
in the playback mode palette.
The screen for selecting the unit for processing appears.
2
Select [Select image(s)] or
[Select a folder] and press
E
.
D
Folder Name
When images are captured with this camera, a folder is automatically created and the captured images are stored in it.
Each folder name consists of a sequential number from 100 to
999 and a string of 5 characters.
The folder name can be changed.
1
Select [Folder Name] in
D
2 menu and press
D
.
The [Folder Name] screen appears.
2
Select a folder name and press
E
.
Date
PENTX
The two digits of the month and day on which the picture was taken are assigned after the folder number.
The month and day appear according to the date format set in [Date Adjustment].
Example) 101_0125: for images taken on
January 25th
The character string “PENTX” is assigned after the folder number.
The character string can be changed arbitrarily.
Example) 101PENTX
Proceed to Step 6 if you selected [Date] or do not need to change the character string from “PENTX”.
106
3
Select the image(s) or folder to protect.
Refer to Step 2 of “Deleting Selected Images” (p.78) for how
to select the image(s).
Proceed to Step 5 if [Select a folder] is selected.
4
Press
G
.
The confirmation screen appears.
5
Select [Protect] and press
E
.
t
Memo
• To protect all images stored in the memory card, select
[Protect All Images] of the B 1 menu.
3
Press
B
, and then press
D
.
The text-entry screen appears.
4
Change the text.
Enter 5 single-byte alphanumeric characters.
Text selection cursor
A B C D E F G H I J K L M
N O P Q R S T U V W X Y Z
0 1 2 3 4 5 6 7 8 9 _
PP EE NN TT XX
Text input cursor
Available operations
ABCD
Moves the text selection cursor.
R
E
Moves the text input cursor.
Enters a character selected with the text selection cursor at the position of the text input cursor.
M
Resets the entered text to “PENTX”.
5
After entering the text, move the text selection cursor to [Finish], and press
E
.
The screen of Step 2 reappears.
6
Press
F
twice.
t
Memo
• A folder with a new number is created when the folder name is changed.
• A maximum of 500 images can be stored in a single folder.
When the number of captured images exceeds 500, a new folder is created with the number following the number of the folder currently being used. In Bracketing shooting, images are stored in the same folder until shooting is completed.
u
Caution
• The maximum folder number is 999. After the folder number reaches 999, you cannot capture new images if you attempt to change the folder name or create a new folder, or when the file name number reaches 9999.
Create New Folder
When [Create New Folder] is selected in the D 2 menu, a folder is created with a new number when the next image is saved.
u
Caution
• You cannot successively create multiple folders.
t
Memo
• A new folder is automatically created in the following cases.
• When the drive mode is set to [Interval Shooting] (p.64)
• When the drive mode is set to [Interval Composite] and
[Save Process] is set to [On] (p.65)
• When [Select multiple images] or [Select a folder] is
selected for [RAW Development] (p.87)
6
107
6
File Name
One of the following string of characters is used as the file name prefix depending on the [23 Color Space] setting of the E 4 menu.
Color Space File Name sRGB IMGPxxxx.JPG
AdobeRGB _IMGxxxx.JPG
The first four characters can be changed to a character string of your choice.
1
Select [File Name] in
D
2 menu and press
D
.
The [File Name] screen appears.
2
Select
A
or
C
and press
D
.
The text-entry screen appears.
_ II M
G
.
JPG
.
JPG
.
MOV
3
Change the text.
Up to 4 single-byte alphanumeric characters can be entered.
Refer to Steps 4 and 5 of “Folder Name” (p.106) for how to
enter text.
4
Press
F
twice.
t
Memo
• When [Color Space] is [AdobeRGB], the file name prefix is “_” and first three characters of the entered character string becomes the file name.
• For movies, regardless of the [Color Space] setting, the file name is “IMGPxxxx.MOV” or the one with the entered string of characters.
File No.
Each file name consists of a string of
4 characters and a sequential number from 0001 to 9999. You can set whether to continue the sequential numbering for the file name even if a new folder is created in [Sequential Numbering] of [File
No.] in the D 2 menu.
Z
Y
Continues the sequential numbering for the file name even if a new folder is created.
Returns the file number of the first image saved to a folder to 0001 each time a new folder is created.
Select [Reset File Number] to reset the file number to its default value.
t
Memo
• When the file number reaches 9999, a new folder is created and the file number is reset.
108
D
Sets the photographer and copyright information embedded in the Exif data.
1
Select [Copyright Information] in
D
2 menu and press
D
.
The [Copyright Information] screen appears.
2
Use
CD
to set [Embed
Copyright Data].
Y
Does not embed copyright information in the Exif data.
Z
Embeds copyright information in the Exif data.
3
Select [Photographer] or [Copyright Holder], and press
D
.
The text-entry screen appears.
4
Change the text.
Up to 32 single-byte alphanumeric characters and symbols can be entered.
Text selection cursor
C D
..
,,
+
LM NO P Q R
VW X Y
< > @
= $ %
‘‘ ““
{{ }}
-- _
:: ;;
!! ?? ** #
Finish
Available operations
ABCD
Moves the text selection cursor.
R
J
E
Moves the text input cursor.
Switches between upper and lower case letters.
Enters a character selected with the text selection cursor at the position of the text input cursor.
L
Deletes a character at the position of the text input cursor.
5
After entering the text, move the text selection cursor to [Finish], and press
E
.
The screen of Step 2 reappears.
6
Press
F
twice.
t
Memo
• The Exif information can be checked using the provided software “Digital Camera Utility 5”.
6
Text input cursor
109
7
Capture Mode
R
Function
Sensitivity
Flash
Continuous
Shooting
Self-timer
Remote Control
Bracketing
Multi-exposure
Interval Shooting
Interval
Composite
Interval Movie
Record
Star Stream
Focus Method
×
× z
File Format
RAW/RAW+
b cd im q eo f
×
× x e
×
×
×
×
×
×
×
×
×
×
y
×
× x
S gh js tv k l p
×
×
×
×
×
×
×
×
×
×
×
× x
×
× y
×
×
×
×
×
×
×
× y
× u
×
×
×
×
#: Restricted
×
: Not available
Y
×
×
×
×
×
×
×
×
M
×
×
×
×
×
×
C
×
×
×
×
×
×
×
×
110
Capture Mode
Function
R b cd im q eo f
S gh js tv k l p u
Shake Reduction
White Balance
g
g
g
g
g
Custom Image
Digital Filter
HDR Capture
AA Filter Simulator
×
×
×
×
×
×
×
×
Save RAW Data
×
*1 [ISO AUTO] is not available.
*2 Can be set from ISO 100 to ISO 3200 only when the capture mode is set to o
.
*3 Fixed to; the setting cannot be changed.
*4 Limited to; available settings are limited.
*5 Fixed to a specific setting; the setting cannot be changed.
*6 Specific settings are used.
*7 Available only when the drive mode is set to [Interval Movie Record].
*8 [Bracketing] is not available.
×
Y
×
×
×
M
×
×
C
×
×
7
111
7
Clarity
Enhancement
#: Restricted
×
: Not available
Lens Correction AA Filter Simulator Digital Filter
Flash
Continuous
Shooting
Bracketing
Multi-exposure
Interval Shooting
Interval Composite
Interval Movie
Record
Star Stream
File Format RAW/RAW+
×
#
×
#
×
Digital Filter
HDR Capture
×
*1 There is a restriction on the minimum value for [Interval].
*2 [Bracketing] is not available.
HDR Capture
×
×
×
×
×
×
×
×
×
×
×
×
×
×
×
×
×
×
×
112
All capture modes are available when a DA, DA L, or FA J lens is used, or when a lens with an 9 position is used with the aperture ring set to the 9 position.
When other lenses than above are used, or a lens with 9 position is used in a position other than 9 , the following restrictions apply.
x
: Available #: Restricted
×
: Not available
Lens
[Mount type]
DA
DA L
D FA
FA J
FA
A M
P
Function
[K
AF
]
[K
AF2
]
[K
AF3
]
[K
AF
]
[K
AF2
]
[K
AF
] [K
A
] [K]
Autofocus
(Lens only)
Manual focus
(With focus indicator)
(With matte field)
Quick-shift focus
Focus point selection mode
[Auto] x
– x
#
x x
– x x
– x
–
# x
–
# x
× × × × x x #
×
AE Metering [Multi-segment] x
G / H / I / J / K mode x x x x x x x
×
#
L
mode x x x
P-TTL auto flash
Automatic obtaining of the lens focal length information x x x x x x x x
#
×
× ×
Lens Correction
×
× × ×
*1 Lenses with a maximum aperture of F2.8 or faster. Only available at the
9
position.
*2 Lenses with a maximum aperture of F5.6 or faster.
*3 Available when using the built-in flash, AF540FGZ, AF540FGZ II,
AF360FGZ, AF360FGZ II, AF200FG, or AF160FC.
*4 Only available with compatible lenses.
*5 Distortion Correction and Peripheral Illumination Correction are disabled when a DA FISH-EYE 10-17mm lens is used.
*6 To use an FA SOFT 28mm F2.8 lens, FA SOFT 85mm F2.8 lens, or
F SOFT 85mm F2.8 lens, set [28 Using Aperture Ring] to [Enable] in the E 4 menu. Pictures can be taken with the aperture you set, but only within a manual aperture range.
*7 Only available with an FA 31mm F1.8 Limited, FA 43mm F1.9
Limited, or FA 77mm F1.8 Limited lens.
*8 Fixed to [Spot].
*9
J
with the aperture set to wide open. (The aperture ring has no effect on the actual aperture value.) u
Caution
• When the aperture ring is set to a position other than 9 or a lens without an 9 position or accessories such as an auto extension tube or auto bellows are used, the camera does not operate unless [28 Using Aperture Ring] is set to [Enable] in the E
4 menu. Refer to “Using the Aperture Ring” (p.115) for
details.
• When a retractable lens is attached and is not extended, you cannot take pictures and use some functions. If the lens is retracted during shooting, the camera stops working.
Lens Names and Mount Names
DA lenses with a motor and FA zoom lenses with power zoom use the K
AF2
mount. (Of these lenses, the lenses without an AF coupler use the K
AF3
mount.)
FA single focal length lenses (non-zoom lenses), DA or DA
L lenses without a motor, and D FA, FA J and F lenses use the K
AF
mount. (The power zoom function is not compatible with this camera.)
Refer to respective lens manuals for details.
7
113
7
Compatibility with the Built-in Flash
Depending on the lens being used, the use of the built-in flash may be limited.
DA
k
16-50mm F2.8 ED AL
[IF] SDM
DA 16-85mm F3.5-5.6 ED
DC WR
Lens
Restrictions when using the built-in flash
DA FISH-EYE 10-17mm
F3.5-4.5 ED [IF]/
DA 12-24mm F4 ED AL/
DA 14mm F2.8 ED [IF]/
DA 15mm F4 ED AL/
FA
DA
k k
300mm F2.8 ED [IF]/
560mm F5.6 ED AW/
FA
k
600mm F4 ED [IF]/
FA
k
250-600mm F5.6 ED [IF]
F FISH-EYE 17-28mm
F3.5-4.5
The built-in flash is not available due to vignetting.
DA 16-45mm F4 ED AL
Vignetting may occur if the focal length is less than 20 mm.
When the focal length is less than 28 mm, or when the focal length is 28 mm and the shooting distance is 1 m or less, vignetting may occur.
When the focal length is 20 mm or less, or when the focal length is 35 mm and the shooting distance is less than 1.5 m, vignetting may occur.
When the focal length is 24 mm or less and the shooting distance is 0.8 m or less, vignetting may occur.
114
Lens
DA 17-70mm F4 AL [IF]
SDM
DA 18-250mm F3.5-6.3 ED
AL [IF]
DA 18-270mm F3.5-6.3 ED
SDM
FA
k
28-70mm F2.8 AL
FA SOFT 28mm F2.8/
FA SOFT 85mm F2.8
Restrictions when using the built-in flash
When the focal length is less than 24 mm, or when the focal length is 35 mm and the shooting distance is 1 m or less, vignetting may occur.
Vignetting may occur if the focal length is less than 35 mm.
Vignetting may occur if the focal length is less than 24mm.
Vignetting may occur if the focal length is 28 mm and the shooting distance is less than
1 m.
The built-in flash always discharges fully.
E
The shutter can be released even if the aperture ring of the D
FA, FA, F or A lens is not set to the 9 position or a lens without an 9 position is attached.
Select [Enable] in [28 Using Aperture
Ring] of the E 4 menu.
t
Memo
• If the aperture ring is set to a position other than 9 , the camera operates in J mode regardless of the mode dial setting except when set to L or M mode.
• [F--] appears for the aperture indicator in the status screen,
Live View screen and viewfinder.
How to Achieve the Correct Exposure with the Aperture
Ring Not Set to
9
The correct exposure can be achieved by the following procedures when the aperture ring is not set to 9 .
1 Set the mode dial to L .
2 Set the aperture ring to the desired aperture.
3 Press .
The correct shutter speed will be set.
4 If the correct exposure cannot be achieved, adjust the
ISO sensitivity.
The following restrictions apply depending on the lens being used.
Lens
D FA, FA, F, A, M (lens only or with automatic diaphragm accessories such as auto extension tube K)
Restriction
The aperture remains open.
The shutter speed changes in relation to the open aperture but an exposure deviation may occur.
D FA, FA, F, A, M, S (with diaphragm accessories such as extension tube K)
Manual diaphragm lens such as reflex lens (lens only)
FA SOFT 28mm/
FA SOFT 85mm/
F SOFT 85mm (lens only)
Pictures can be taken with a set aperture value but an exposure deviation may occur.
Pictures can be taken with a set aperture value in the manual aperture range.
7
115
7
A
The Shake Reduction function operates by obtaining lens information such as focal length. Set the focal length when using a lens that the focal length information cannot be automatically obtained.
1
Set [28 Using Aperture Ring] to [Enable] in the
E
4 menu.
2
Turn the camera off.
3
Attach a lens to the camera and turn the camera on.
The [Input Focal Length] screen appears.
4
Use
AB
to set the focal length.
Press C to select a value from the list.
When using a zoom lens, select the actual focal length to be used for shooting.
5
Press
E
.
The camera returns to standby mode.
35 mm
t
Memo
• The focal length setting can be changed in [Input Focal
Length] of the A 3 menu.
Use of the following external flashes (optional) enables a variety of flash modes, such as P-TTL auto flash mode.
x
: Available #: Restricted
×
: Not available
Compatible Flash
Camera Function
Built-in
Flash
AF540FGZ
AF540FGZ II
AF360FGZ
AF360FGZ II
AF200FG
AF160FC
Red-eye reduction flash x x x x x x Auto Flash Discharge
Automatic switch to the flash sync speed
Automatic setting of the aperture value in G or I mode
P-TTL auto flash
Slow-speed Sync flash
Flash Exposure
Compensation
AF assist light of external flash
Contrast-control-sync flash
Slave flash
High-speed Sync flash x x
x x
× x
#
×
× x x x
x x x
x x x x x x x
x x
×
×
×
×
116
*1 Available only when using a DA, DA L, D FA, FA J, FA, F, or A lens.
*2 AF assist light is not available with the AF540FGZ or AF360FGZ.
*3 Shutter speed of 1/90 seconds or slower.
*4 When combined with the AF540FGZ, AF540FGZ II, AF360FGZ, or
AF360FGZ II, 1/3 of the flash discharge can be output by the built-in flash and 2/3 can be output by the external flash.
*5 Available only when combined with the AF540FGZ, AF540FGZ II,
AF360FGZ, or AF360FGZ II.
u
Caution
• Never press 1 on the camera when any external flash unit is attached to the camera. The built-in flash will hit the external flash. If you want to use both at once, connect them using an extension cord.
• Flashes with the reversed polarity (the center contact on the hot shoe is minus) cannot be used due to the risk of damaging the camera and/or flash.
• Do not combine with accessories that have a different number of contacts, such as a Hot Shoe Grip, as a malfunction may occur.
• Combining with flashes from other manufacturers may cause equipment breakdown.
t
Memo
• With the AF540FGZ, AF540FGZ II, AF360FGZ, or
AF360FGZ II, you can use the High-speed Sync flash to discharge a flash when taking a picture at a shutter speed faster than 1/180 seconds. Set the capture mode to I , K , or L .
In addition to GPS information being saved in the shooting information of the image, the following functions are available when the optional GPS unit O-GPS1 is attached to this camera.
Electronic
Compass
ASTROTRACER
GPS Time Sync
Displays the current latitude, longitude,
N 36°45.410'
W140°02.000'
89m
0°
altitude, direction,
Coordinated
Universal Time
(UTC), capture mode, and exposure value.
Tracks and captures celestial bodies.
By matching the movement of the camera’s built-in Shake Reduction unit with the movement of celestial bodies, celestial bodies can be captured as individual points even when shooting with a long exposure
Automatically adjusts the camera’s date and time settings using information obtained from GPS satellites.
t
Memo
• Refer to the manual of the GPS unit for details on how to attach the unit and information on the unit’s functions.
• To display [Electronic Compass], refer to “Shooting Info
u
Caution
• “Simple Navigation” cannot be used with this camera.
7
117
1
Set the mode dial to
M
.
2
Select [GPS] in
A
2 menu and press
D
.
The [GPS] screen appears.
3
Select [ASTROTRACER] and press
D
.
The [ASTROTRACER] screen appears.
4
Set [Action in B Mode] to
a
and press
E
.
A
7
118
5
To set the desired exposure time, first set
[Timed Exposure] to [ON].
You can set the exposure time between 0'10" and 5'00" in
[Exposure Time].
6
Press
F
three times.
The camera returns to standby mode.
7
Press
0
fully.
Shooting starts.
8
Press
0
fully again.
Shooting stops.
When [Timed Exposure] is enabled, shooting ends automatically after the set time has elapsed.
t
Memo
• In rare cases, the camera may not operate correctly due to causes such as static electricity, etc. This can be remedied by taking the battery out and putting it back in again. If the camera operates correctly, it does not require any repairs.
Problem
The camera does not turn on.
The shutter cannot be released.
Cause
Battery is not installed properly.
The battery power is low.
The built-in flash is being charged.
There is no available space on the memory card.
Data is being processed.
The lens aperture ring is set to a position other than
9 .
Remedy
Check the orientation of the battery.
Charge the battery.
Wait until charging is finished.
Insert a memory card with available space or delete unwanted images.
Wait until processing is finished.
Set the lens aperture ring to the
9 position or select [Enable] in
[28 Using Aperture Ring] of the
E
Problem
Autofocus does not work.
The focus cannot be locked.
The built-in flash does not discharge.
Cause
The subject is difficult to focus on.
The subject is too close.
AF Mode of Live
View is set to f .
The flash mode is set to A or B .
Remedy v cannot work well for lowcontrast objects (the sky, white walls, etc.), dark colors, intricate designs, rapidlymoving objects or scenery shot through a window or a net-like pattern.
Lock focus on another object located at the same distance as your subject, then aim at the target and take a picture.
Alternatively, use w .
Move away from the subject and take a picture.
Set [Contrast AF] to e , g , h , or i
When the flash mode is set to
A or B , the flash does not discharge if the subject is bright.
The camera is not recognized when it is connected to a computer.
The USB connection mode is set to [PTP].
Set [USB Connection] to [MSC] in the D 2 menu.
Dust or dirt particles appear in images.
The CMOS sensor is dirty or dusty.
Activate [Dust Removal] from the D 4 menu. The Dust
Removal function can be activated every time the camera is turned on and off.
(p.120) if the problem persists.
Problem
There are visible defects in a captured image, or parts in the display monitor that do not light up or remain lit.
Cause Remedy
There are defective pixels in the CMOS sensor.
Activate [Pixel Mapping] from the D 4 menu.
It takes about 30 seconds to correct the defective pixels, so be sure to install a fully charged battery.
7
119
7
D
Raise the mirror up and open the shutter when cleaning the
CMOS sensor with a blower.
1
Turn the camera off and remove the lens.
2
Turn the camera on.
3
Select [Sensor Cleaning] in
D
4 menu and press
D
.
The [Sensor Cleaning] screen appears.
4
Select [Mirror Up] and press
E
.
The mirror rises up and the E lamp blinks slowly.
5
Clean the CMOS sensor with a blower.
6
Turn the camera off.
The mirror automatically returns to its original position.
u
Caution
• Never use a spray blower or a blower with a brush. The
CMOS sensor may be damaged. Do not wipe the CMOS sensor with a cloth.
• Do not put the tip of the blower inside the lens mount area. If the power is turned off during cleaning, this may cause damage to the shutter, CMOS sensor and the mirror. Hold the camera with the lens mount down while cleaning the sensor so dust will fall away from the sensor when the blower is used.
• When the battery level is low, the message [Not enough battery power remaining to clean sensor] is displayed on the monitor. Install a fully charged battery. If the battery capacity becomes low during cleaning, a warning beep will sound. In this case, stop cleaning immediately.
t
Memo
• Please contact your nearest service center for professional cleaning as the CMOS sensor is a precision part.
• You can use the optional Image Sensor Cleaning Kit O-ICK1 when cleaning the CMOS sensor.
120
Error messages
Memory card full
No image
This image cannot be displayed
No card in the camera
Memory card error
Card is not formatted
Card is locked
This image cannot be magnified
This image is protected
Description
The memory card is full and no more images can be saved. Insert a new memory card or delete unwanted files.
There are no images that can be played back on the memory card.
You are trying to play back an image in a format not supported by this camera. You may be able to play it back on a computer.
There is no memory card inserted in the camera.
The memory card has a problem, and image capture and playback are impossible. You may be able to play it back on a computer.
The memory card you have inserted is unformatted or has been previously used on another device and is not compatible with this camera. Use the card after formatting it with this camera.
The write-protect switch on the memory
card you have inserted is locked. (p.138)
You are trying to magnify an image that cannot be magnified.
You are trying to delete an image that is protected. Remove the protection from
Error messages
Not enough battery power remaining to activate Pixel
Mapping
Not enough battery power remaining to clean sensor
Not enough battery power remaining to update the firmware
Unable to update firmware.
There is a problem with the firmware update file
Description
These messages appear when you try to perform Pixel Mapping or Sensor
Cleaning, or to update the firmware if the battery level is insufficient. Install a fully charged battery.
Image folder cannot be created
Unable to store image
The operation could not be completed correctly
No more images can be selected
No image can be processed
This image cannot be processed
Unable to update the firmware. The update file is damaged. Try downloading the update file again.
The maximum folder number (999) is being used, and no more images can be saved. Insert a new memory card or format the card.
The image could not be saved because of a memory card error.
The camera was unable to adjust the manual white balance. Try the operation again.
You are trying to select more than the maximum number of images for the following functions.
• Select & Delete
• RAW Development
• Protect
There are no images that can be processed using the Digital Filter or RAW
Development function.
Appears when you try to perform Resize,
Cropping, Digital Filter, Movie Edit, RAW
Development, or Save as Manual WB for images captured with other cameras, or when you try to perform Resize or
Cropping for minimum file size images.
7
121
7
Error messages
This function is not available in the current mode
The camera will turn off to prevent damage from overheating
Description
You are trying to set a function that is not available for the capture mode that is set.
The camera will turn off because its internal temperature is too high. Leave the camera turned off until it has had time to cool down before turning on the camera again.
Shutter release is disabled.
Ensure the zooming index on the lens is set to a position that permits shutter release
Pictures cannot be taken when a retractable lens is attached and is not extended.
122
Model Description
Type
Lens Mount
Compatible
Lenses
TTL autofocus, auto-exposure SLR digital camera with a built-in retractable P-TTL flash
PENTAX K
AF2
bayonet mount (AF coupler, lens information contacts, K-mount with power contacts)
K
AF3
, K
AF2
(power zoom not compatible), K
AF
, K
A mount lenses
Image Capture Unit
Image Sensor
Effective Pixels
Total Pixels
Dust Removal
Sensitivity
(Standard Output)
Primary color filter, CMOS, Size: 23.5 × 15.6 (mm)
Approx. 20.12 megapixels
Approx. 20.42 megapixels
SP coating and CMOS sensor vibration
ISO AUTO/100 to 51200 (EV steps can be set to 1
EV, 1/2 EV, or 1/3 EV)
Image Stabilizer Sensor-shift Shake Reduction
AA Filter
Simulator
Moiré reduction using SR unit: OFF/Type1/Type2/
Bracketing
File Formats
Recording
Formats
Recorded Pixels
Quality Level
Color Space
Storage Media
RAW (PEF/DNG), JPEG (Exif 2.30), DCF 2.0 compliant
JPEG: q (20M: 5472×3648), p (12M:
4224×2816), o (6M: 3072×2048), r (2M:
1920×1280)
RAW: q (20M: 5472×3648)
RAW (12bit): PEF, DNG
JPEG: m (Best), l (Better), k (Good)
RAW + JPEG simultaneously recordable sRGB, AdobeRGB
SD/SDHC*/SDXC* memory card (*UHS-I compatible)
Storage Folder
Storage File
Folder Name: Date (100_1018, 101_1019...) or a user-assigned name (default: PENTX)
File Name: user-assigned name (default: IMGP****)
File No.: Sequential Numbering, Reset
Viewfinder
Type Pentaprism Finder
Coverage (FOV) Approx. 100%
Magnification
Eye-Relief Length
Approx. 0.95× (50mm F1.4 at infinity)
Approx. 20.5 mm (from the view window),
Approx. 22.3 mm (from the center of lens)
Diopter
Adjustment
Approx. -2.5 to +1.5 m
-1
Focusing Screen
Interchangeable Natural-Bright-Matte III focusing screen
Live View
Type
Focusing System
Display
TTL method using the CMOS image sensor
Contrast detection (Face Detection, Tracking,
Multiple AF Points, Select, Spot)
Focus Peaking: ON/OFF
Field of view: approx. 100%, Electronic Level
Display, Magnified view (up to 10×), Grid Display (4
× 4 Grid, Golden Section, Scale), Histogram,
Highlight Alert
LCD Monitor
Type
Size
Dots
Adjustment
Vari-angle TFT color LCD monitor featuring an airgapless structure with a tempered-glass front panel
3.0 inches (3:2)
Approx. 921K dots
Brightness, saturation and colors adjustable
7
123
7
124
White Balance
Type
Preset Modes
Method using a combination of the CMOS image sensor and the light source detection sensor
Auto White Balance, Multi Auto White Balance,
Daylight, Shade, Cloudy, Fluorescent Light (
D
:
Daylight Color,
N
: Daylight White,
W
: Cool White,
L
:
Warm White), Tungsten Light, Flash, n , Manual
White Balance, Color Temperature, Copying the white balance settings of a captured image
Fine Adjustment Adjustable ±7 steps on A-B axis and G-M axis
Autofocus System
Type
Focus Sensor
TTL: phase-matching autofocus
SAFOX X, 11 points (9 cross type focus points in the center)
Brightness Range EV -3 to 18 (ISO100, at normal temperature)
AF Modes
Focus Point
Selection Modes
AF Assist Light
Single AF ( x ), Continuous AF ( y ), Auto select AF ( z
)
Auto (11 AF Points), Auto (5 AF Points), Select,
Expanded Area AF, Spot
Dedicated LED AF assist light
Exposure Control
Type
TTL open-aperture 77 segment metering
Metering modes: Multi-segment, Center-weighted,
Spot
Metering Range EV 0 to 22 (ISO100 at 50mm F1.4)
Capture Modes
Auto Picture modes: Standard, Portrait, Landscape,
Macro, Moving Object, Night Scene Portrait, Sunset,
Blue Sky, Forest
Scene Modes: Portrait, Landscape, Macro, Moving
Object, Night Scene Portrait, Sunset, Blue Sky,
Forest, Night Scene, Night Scene HDR (JPEG only),
Night Snap, Food, Pet, Kids, Surf & Snow, Backlight
Silhouette, Candlelight, Stage Lighting, Museum
Advanced HDR mode (JPEG only): exposure bracket value is selectable from ±1, ±2 or ±3 EV
Exposure modes: Program, Sensitivity Priority,
Shutter Priority, Aperture Priority, Shutter & Aperture
Priority, Manual, Bulb
EV Compensation ±5 EV (1/3 EV steps or 1/2 EV steps can be selected)
AE Lock
Can be assigned to f
from [Button
Customization].
Shutter
Type
Shutter Speed
Electronically controlled vertical-run focal plane shutter
Auto: 1/6000 to 30 seconds, Manual: 1/6000 to 30 seconds (1/3 EV steps or 1/2 EV steps), Bulb
Drive Modes
Mode Selection
Continuous
Shooting
Multi-exposure
[Still picture]
Single frame, Continuous (H, L), Self-timer (12 sec.,
2 sec., continuous), Remote Control (immediately, 3 sec., continuous), Bracketing*
1
, Multi-exposure*
2
,
1
Interval Shooting*
1
[Movie]
, Interval Composite*
Remote Control, Interval Movie Record*
1
Stream*
1
, Star
*1 Available with Self-timer or Remote Control
*2 Available with Continuous Shooting, Self-timer, or Remote Control
Max. approx. 5.5 fps, JPEG ( q : m at
Continuous H): 30 frames, RAW: 9 frames, RAW+: 6 frames
Max. approx. 3.0 fps, JPEG ( q : m at
Continuous L): 100 frames, RAW: 14 frames, RAW+:
8 frames
• When the sensitivity is set to ISO100.
Composite Mode: Additive, Average, Bright
Number of Shots: 2 to 2000 times
Interval Shooting
[Interval Shooting]
Interval: 2 sec. to 24 hr., Standby Interval: minimum time or 1 sec. to 24 hr., Number of Shots: 2 to 2000 times, Start Interval: Now, Set Time
[Interval Composite]
Interval: 2 sec. to 24hr., Standby Interval: minimum time or 1 sec. to 24 hr., Number of Shots: 2 to 2000 times, Start Interval: Now, Set Time, Composite
Mode: Additive, Average, Bright, Save Process: On,
Off
[Interval Movie]
Recorded Pixels: z , u , t , Interval: 2 sec. to
24 hr., Standby Interval: minimum time or 1 sec. to
24 hr., Number of Shots: 8 to 2000 times ( z : 8 to
500 times), Start Interval: Now, Set Time
[Star Stream]
Recorded Pixels: z , u , t , Standby Interval: minimum time or 1 sec. to 24 hr., Number of Shots:
8 to 2000 times ( z : 8 to 500 times), Start Interval:
Now, Set Time, Fade-out: Off, Low, Medium, High
Flash
Built-in Flash
Flash Modes
Sync Speed
Flash Exposure
Compensation
External Flash
Built-in retractable P-TTL pop-up flash
Guide number: approx. 12 (ISO100/m)
Angle of view coverage: equivalent to 28mm lens in
35 mm format
Auto Flash Discharge (Auto Picture, Scene Mode),
Auto Flash + Red-eye Reduction (Auto Picture,
Scene Mode), Flash On, Flash On + Red-eye
Reduction, Slow-speed Sync, Slow-speed Sync +
Red-eye, Trailing Curtain Sync, Manual Flash
Discharge (FULL to 1/128 power)
1/180 sec.
-2.0 to +1.0 EV
P-TTL, Leading Curtain Sync, Trailing Curtain Sync,
Contrast-control-sync, High-speed Sync, Wireless
Sync
• Available with 2 dedicated external flashes
Capture Functions
Custom Image
HDR Capture
Bright, Natural, Portrait, Landscape, Vibrant,
Radiant, Muted, Bleach Bypass, Reversal Film,
Monochrome, Cross Processing
Cross Processing Random, Preset 1-3, Favorite 1-3
Digital Filter
Extract Color, Replace Color, Toy Camera, Retro,
High Contrast, Shading, Invert Color, Unicolor Bold,
Bold Monochrome
Auto, Type1, Type2, Type3
Bracket Value adjustable
Auto Align: On, Off
Clarity
Enhancement
Electronic Level
Horizon
Correction
On, Off
Lens Correction
Distortion Correction, Peripheral Illumination
Correction, Lateral Chromatic Aberration Correction,
Diffraction Correction
D-Range Settings Highlight Correction, Shadow Correction
Noise Reduction Slow Shutter Speed NR, High-ISO NR
Displayed in viewfinder (horizontal direction only); displayed on LCD monitor (horizontal direction and vertical direction)
SR On: corrects up to 1 degree,
SR Off: corrects up to 1.5 degrees
Movie
File Format
Recorded Pixels
Framerate
Sound
Recording Time
MPEG-4 AVC/H.264 (MOV)
• Motion JPEG (AVI) for Interval Movie Record and
Star Stream u (1920×1080, 30p/25p/24p) t (1280×720, 60p/50p)
Built-in stereo microphone, external microphone
(stereo recording compatible)
Recording Sound Level adjustable (sound level is displayed on the monitor)
Up to 4 GB or 25 minutes; automatically stops recording if the internal temperature of the camera becomes high.
7
125
7
Custom Image
Clarity
Enhancement
• Available only for Interval
Movie Record
Bright, Natural, Portrait, Landscape, Vibrant,
Radiant, Muted, Bleach Bypass, Reversal Film,
Monochrome, Cross Processing
Cross Processing Random, Preset 1-3, Favorite 1-3
Digital Filter
Extract Color, Replace Color, Toy Camera, Retro,
High Contrast, Shading, Invert Color, Unicolor Bold,
Bold Monochrome
HDR Capture
• Available only for Interval
Movie Record
Auto, Type1, Type2, Type3
Bracket Value adjustable
On, Off
Playback Functions
Playback View
Delete
Digital Filter
Single frame, Multi-image display (6, 12, 20, 35, and
80 thumbnails), Image magnification (Up to 16×, quick zoom), Rotated image display, Histogram (Y histogram, RGB histogram), Highlight Alert, Detailed
Information Display, Copyright Information
(Photographer, Copyright Holder), GPS information
(Latitude, Longitude, Altitude, Coordinated Universal
Time (UTC)), Direction, Folder Display, Calendar
Filmstrip Display, Slideshow
Single image, all images, select & delete, folder,
Instant Review image
Base Parameter Adj, Extract Color, Replace Color,
Toy Camera, Retro, High Contrast, Shading, Invert
Color, Unicolor Bold, Bold Monochrome, Tone
Expansion, Sketch, Water Color, Pastel,
Posterization, Miniature, Soft, Starburst, Fish-eye,
Slim, Monochrome
RAW
Development
Editing Features
Development options: Select single image, Select multiple images, Select a folder
Development parameters: File Format (JPEG),
Aspect Ratio, JPEG Recorded Pixels, JPEG Quality,
Color Space, Distortion Correction, Peripheral
Illumin. Corr., Lat-Chromatic-Ab Adj, Diffraction
Correction, Color Fringe Correction, White Balance,
Custom Image, Digital Filter, Clarity Enhancement,
Sensitivity, High-ISO NR, Shadow Correction
Image Rotation, Color Moiré Correction, Resize,
Cropping (aspect ratio can be changed and tilt correction is available), Movie Edit (dividing a movie file and deleting unwanted segments), Capturing a
JPEG still picture from a movie, Save RAW Data
Customization
USER Mode Up to 2 settings can be saved.
Custom Functions 28 items
Mode Memory
E-Dial
Programming
12 items
E-dials (front/rear): customizable to each exposure mode
Button
Customization
AF Customization
Text Size
World Time
AF Fine
Adjustment
P button: One Push File Format, Bracketing,
Optical Preview, Digital Preview, Shake Reduction,
AF Active Area f button: Enable AF1, Enable AF2, Cancel AF,
AE Lock (can be customized for taking still pictures and for recording movies separately)
Self-portrait shutter button: On, Off
AF.S Setting: Focus-priority, Release-priority
1st Frame Action in AF.C: Release-priority, Auto,
Focus-priority
Action in AF.C Continuous: Focus-priority, Auto,
FPS-priority
Hold AF Status: Off, Low, Medium, High
AF in Interval Shooting: Locks focus at 1st exposure,
Adjusts focus for each shot
Standard, Large
World Time settings for 75 cities (28 time zones)
±10 steps, adjustment for all lenses or individual lenses (up to 20 values can be saved)
126
Copyright
Information
Names of “Photographer” and “Copyright Holder” are embedded to the image file. A revision history can be checked using the provided software.
Power Supply
Battery Type
AC Adapter
Battery Life
Rechargeable Lithium-ion Battery D-LI109
AC Adapter Kit K-AC128 (optional)
Number of recordable images:
(with 50% flash usage): approx. 410 images,
(without flash usage): approx. 480 images
Playback time: approx. 270 minutes
• Tested in compliance with CIPA standard using a fully charged lithium-ion battery at a temperature of 23°C. Actual results may vary depending on the shooting conditions/circumstances.
Interfaces
Connection Port
USB 2.0 (micro B), HDMI output terminal (Type D), stereo microphone input terminal
USB Connection MSC/PTP
Wireless LAN
Standards
Frequency
(Center
Frequency)
Security
IEEE 802.11b/g/n (standard wireless LAN protocol)
2412 to 2462 MHz (channels: Ch 1 to Ch 11)
Authentication: WPA2
Encryption: AES
NFC
Standards
Operating
Frequency
ISO/IEC14443 TypeA, ISO/IEC14443 TypeB, JIS X
6319-4 (automatically selected)
13.56 MHz
Dimensions and Weight
Dimensions
Weight
Approx. 122.5 mm (W) × 91 mm (H) × 72.5 mm (D)
(excluding protrusions)
Approx. 678 g (Including dedicated battery and SD
Memory Card)
Approx. 618 g (body only)
Included Accessories
Package
Contents
Software
Strap O-ST132, Rechargeable Lithium-ion Battery
D-LI109, Battery Charger D-BC109, AC plug cord,
Software (CD-ROM) S-SW156, Start Guide
<Mounted to the camera> Eyecup F
R
, Hot shoe cover F
K
, Body mount cover
Digital Camera Utility 5
Optional Accessories
GPS Unit
O-GPS1: GPS information (Latitude, Longitude,
Altitude, Coordinated Universal Time (UTC)),
Direction, Electronic Compass, ASTROTRACER
7
127
7
Approximate Image Storage Capacity and
Playback Time
(When using the fully charged battery)
Battery
Temperature
Normal
Shooting
Flash Photography
50%
Use
100%
Use
Playback
Time
D-LI109 23°C
480 410 360
270 minutes
• The image storage capacity (normal recording and flash use 50%) is based on measuring conditions in accordance with CIPA standards, while other data is based on our measuring conditions. Some deviation from the above figures may occur in actual use depending on the selected capture mode and shooting conditions.
Approximate Image Storage Capacity by Size
(When using a 2 GB memory card)
Recorded
Pixels q 20M p
12M o 6M r
2M m
JPEG Quality l k
134
224
418
1024
304
503
917
2119
596
975
1707
3615
PEF
59
–
–
–
DNG
59
–
–
–
• The number of storable images may vary depending on the subject, shooting conditions, selected capture mode and memory card, etc.
List of World Time Cities
The following cities can be set as Hometown and Destination.
Region
North
America
City
Honolulu, Anchorage, Vancouver, San
Francisco, Los Angeles, Calgary, Denver,
Chicago, Miami, Toronto, New York, Halifax
Central and South
America
Mexico City, Lima, Santiago, Caracas, Buenos
Aires, Sao Paulo, Rio de Janeiro
Europe
Africa/
West Asia
East Asia
Oceania
Lisbon, Madrid, London, Paris, Amsterdam,
Milan, Rome, Copenhagen, Berlin, Prague,
Stockholm, Budapest, Warsaw, Athens, Helsinki,
Moscow
Dakar, Algiers, Johannesburg, Istanbul, Cairo,
Jerusalem, Nairobi, Jeddah, Tehran, Dubai,
Karachi, Kabul, Male, Delhi, Colombo,
Kathmandu, Dacca
Yangon, Bangkok, Kuala Lumpur, Vientiane,
Singapore, Phnom Penh, Ho chi Minh, Jakarta,
Hong Kong, Beijing, Shanghai, Manila, Taipei,
Seoul, Tokyo, Guam
Perth, Adelaide, Sydney, Noumea, Wellington,
Auckland, Pago Pago
128
With the provided software “Digital Camera Utility 5”, you can develop RAW files, make color adjustments, or check shooting information on a computer. Install the software from the provided CD-ROM (S-SW156).
We recommend the following system requirements to connect the camera to a computer and to use the software.
Windows
OS
CPU
RAM
Windows 8.1 (32-bit, 64-bit), Windows 8 (32-bit,
64-bit), Windows 7 (32-bit, 64-bit), or Windows
Vista (32-bit, 64-bit)
Intel Core 2 Duo or higher
2 GB or more
HDD
For installing and starting up the program:
100 MB or more of available space
For saving image files: Approx. 10 MB/file (JPEG),
Approx. 20 MB/file (RAW)
Monitor
1280×1024 dots, 24-bit full color or higher
Macintosh
OS
CPU
OS X 10.10, 10.9, 10.8, or 10.7
Intel Core 2 Duo or higher
RAM
HDD
2 GB or more
For installing and starting up the program:
100 MB or more of available space
For saving image files: Approx. 10 MB/file (JPEG),
Approx. 20 MB/file (RAW)
Monitor
1280×1024 dots, 24-bit full color or higher t
Memo
• QuickTime is required to play back movies transferred to a computer with an OS other than Windows 8 and Windows
8.1. (A computer with Windows 8 or Windows 8.1 can play back movies with a pre-installed player software.)
You can download it from the following site: http://www.apple.com/quicktime/download/
7
129
7
130
A menu.......................... 21
menu.......................... 25
B menu.......................... 25
menu .......................... 26
E menu........................... 28
mode.......................... 49
b Portrait....................... 45 c
Landscape................. 45 d Macro ........................ 45 e
Moving Object ........... 45 f Night Scene Portrait .. 45 g
Sunset ....................... 45 h Blue Sky .................... 45 i
Forest ........................ 45
j Night Scene............... 46 k
Night Scene HDR ...... 46 l Night Snap................. 46 m
Food .......................... 46 o Pet ............................. 46 p
Kids ........................... 46 q Surf & Snow .............. 46 s
Backlight Silhouette... 46 t Candlelight ................ 46 u
Stage Lighting ........... 46 v Museum..................... 46
........................................ 55
AA Filter Simulator .......... 76
AC adapter ...................... 33
........................................ 55
AE Lock ................... 49, 101
AE Metering..................... 52
AE-L with AF Locked ....... 28
v .................................. 54
AF area............................ 57
AF Assist Light ................ 55
AF assist light .................... 7
AF coupler ......................... 7
AF Fine Adjustment ......... 58
AF frame.................... 40, 41
AF in Interval Shooting .... 65
AF Mode.................... 55, 57
AF point ........................... 56
.............................. 55 y ............................... 55 x
............................... 55
AF.S Setting .................... 55
AF/AE-L Button ............. 101
Anti-aliasing filter ............. 76
Exposure ......................... 47
Aperture value ................. 47
Aspect Ratio .............. 83, 87
Auto (AF Active Area)...... 56
Auto Flash Discharge ...... 53
Auto Image Rotation........ 80
Auto Picture mode ........... 39
Auto Power Off ................ 36
Autofocus ........................ 54
AV device ........................ 81
J mode......................... 47
g ................................. 68
mode ........................... 47
........................................ 46
Filter) ............................... 84
Battery ............................. 31
Image) ............................. 71
Filter) ......................... 73, 84
Bracketing ....................... 62
Bracketing Order ............. 62
Brightness adjustment ..... 74
Brightness histogram....... 15
Built-in flash ..................... 53
Bulb Exposure ................. 47
Button ................................ 8
........................................ 79
Cancel AF...................... 101
Candlelight ( S )........... 46
Capture mode.................. 45
Card................................. 34
Card access lamp.............. 7
Catch-in Focus ................ 29
........................................ 52
Certification Marks... 27, 138
........................................ 83
Charging the battery ........ 31
City names............... 37, 128
Clarity Enhancement ....... 76
Cleaning ........................ 120
Color Fringe Correction ... 87
Color Moiré Correction .... 84
Color Space............. 29, 108
Color Temperature .......... 70
........................................ 70
Communication Info ........ 89
Computer......................... 82
......................................... 55
Continuous playback ....... 80
Continuous Shooting ....... 60
Contrast AF ..................... 57
Contrast detection AF...... 54
Control panel ............. 12, 18
Copyright Holder ........... 109
Copyright Information .... 109
Correcting images ........... 74
Create New Folder ........ 107
Cropping.......................... 83
Image) ............................. 71
n ................................ 68
Custom Image ................. 71
Customization................ 100
Date Adjustment........ 26, 37
........................................ 68
DC coupler ...................... 33
Delete .............................. 43
Delete All Images ............ 25
Depth of field ................... 48
Destination .................... 105
........................................ 14
........................................ 87
Dial .................................... 8
Dial indicator.................... 39
Diffraction Correction....... 75
Digital Camera Utility 5 .. 129
Digital Filter ............... 73, 84
Digital Preview............... 101
........................................ 16
Direct keys....................... 18
Display Color ............. 26, 38
Distortion Correction........ 75
DNG ................................ 44
D-Range Settings ............ 74
Drive Mode ...................... 59
................................ 37, 105
Dust Removal ................ 119
Dynamic range ................ 74
E-dial ............................. 100
Editing images ................. 83
................................ 13, 117
Electronic Level ......... 13, 17
Error messages ............. 121
EV Compensation ........... 48
EV Steps ......................... 48
Active Area) ..................... 56
Exposure Bracketing ....... 62
External flash................. 116
Extract Color (Digital Filter)
.................................. 73, 84
........................................ 57
File Format ...................... 44
File Name ...................... 108
File No. .......................... 108
Filter .......................... 73, 84
Image) ............................. 71
Firmware ......................... 27
Firmware Info/Options ..... 27
Fish-eye (Digital Filter) .... 84
Flash........................ 53, 116
Flash (White Balance) ..... 68
Flash compensation ........ 53
Flash On .......................... 53
Flicker Reduction............. 27
........................................ 68
Focus indicator ................ 40
Focus Method.................. 54
Focus Peaking................. 57
Folder display .................. 79
Folder Name.................. 106
Forest ( S )................... 45
Format ............................. 38
Four-way controller.......... 10
Framerate ........................ 44
Function restrictions ...... 110
GPS Time Sync ............. 117
GPS unit ........................ 117
Grid Display ..................... 22
Guide Display ............ 26, 39
Guide number.................. 54
HDMI Out......................... 81
HDMI terminal.................. 81
HDR Capture ............. 46, 74
High Contrast (Digital Filter)
.................................. 73, 84
High-ISO NR.................... 52
Highlight Alert ...... 22, 23, 25
Highlight Correction ......... 74
............................ 15, 22, 23
Hold AF Status ................ 55
Hometown ..................... 105
Horizon Correction........... 22
Hot shoe ............................ 7
Image finishing tone ........ 71
Image plane indicator ........ 7
...................................... 128
Image Sync...................... 93
Indicator Lamps ............... 27
Initial settings................... 36
........................................ 38
7
131
7
132
Input Focal Length......... 116
Instant Review ........... 23, 40
Interval Composite .......... 65
Interval Movie Record ..... 66
Interval Shooting ............. 64
........................................ 65
.................................. 73, 84
ISO sensitivity.................. 51
JPEG ............................... 44
Kelvin............................... 70
Kids ( S )...................... 46
Lamp ............................... 10
Landscape ( S ) ........... 45
........................................ 71
Language setting............. 37
Lat-Chromatic-Ab Adj ...... 75
LCD Display .............. 26, 38
LCD Display Settings ...... 26
Lens......................... 30, 113
Lens Correction ............... 75
Lens focal length ........... 116
.......................................... 7
Lens mount index ............ 30
Lens unlock button .......... 31
Lens with aperture ring .. 115
Link AE and AF Point ...... 52
Live View ................... 11, 22
L mode .......................... 47
Macintosh ...................... 129
Macro ( S )................... 45
Magnifying images .......... 43
Manual Exposure ............ 47
Manual focus ................... 54
Memory ......................... 105
Memory card ................... 34
Menu ............................... 19
w .................................. 54
Microphone.................. 7, 50
Microphone terminal ........ 50
Miniature (Digital Filter) ... 84
Mired ............................... 70
Mirror ................................. 7
Mirror Up ....................... 120
Mode dial ......................... 39
Moiré reduction................ 76
Monitor ...................... 10, 35
Image) ............................. 71
........................................ 84
Motion JPEG ................... 66
Mount type..................... 113
Movie............................... 49
Movie Edit........................ 86
Movie menu ..................... 25
Movie SR ......................... 25
MSC .............................. 119
(White Balance) ............... 68
Multi-exposure ................. 63
Multi-image display.......... 78
AF)................................... 57
Museum ( S ) ............... 46
NFC ................................. 91
NFC mark .................... 7, 90
........................................ 46
........................................ 45
Night Snap ( S ) ........... 46
Noise Reduction ........ 48, 52
Optical Preview ............. 101
Other Indicator Lamps ..... 27
G mode .......................... 47
Pastel (Digital Filter) ........ 84
PEF.................................. 44
Peripheral Illumin. Corr.... 75
Pet ( S ) ....................... 46
Photographer................. 109
Pixel Mapping ................ 119
Playback Info Display selection screen............... 14
Playback menu ................ 25
Playback mode ................ 42
Portrait ( S ) ................. 45
Posterization (Digital Filter)
........................................ 84
Power .............................. 36
Preview............................ 48
Processing images .......... 83
......................................... 47
Protect ........................... 106
Protect All Images ........... 25
Provided software.......... 129
PTP................................ 119
Quality ............................. 44
Quick Zoom ..................... 25
QuickTime ..................... 129
........................................ 71
RAW ................................ 44
RAW/Fx Button.............. 101
Rec. Mode menus ........... 21
Recordable time .............. 49
Recorded Pixels .............. 44
Recording Sound Level ... 50
Red-eye Reduction.......... 53
Remote control receiver .... 7
........................................ 61
Remote Shooting............. 91
Replace Color (Digital Filter)
.................................. 73, 84
Reset ......................... 27, 29
Resize ............................. 83
Retractable lens .............. 40
Retro (Digital Filter) ... 73, 84
Image) ............................. 71
RGB histogram ................ 15
Rotating images .............. 80
Rotation Direction .......... 100
mode ...................... 45
Save Rotation Info ........... 80
Scene modes .................. 45
SD Memory Card............. 34
Select (AF Active Area) ... 56
Select (Contrast AF)........ 57
Select & Delete................ 78
......................................... 78
.......................... 41, 90, 101
Self-timer shooting .......... 60
Sensitivity ........................ 51
Sensitivity Priority Automatic
Exposure ......................... 47
Sensitivity Steps .............. 51
Sensor Cleaning ............ 120
Set-up menus .................. 26
.................................. 73, 84
Shadow Correction .......... 74
Shake Reduction ............. 22
........................................ 71
Shooting .......................... 39
...................................... 118
Shooting Info Display ...... 13
Automatic Exposure ........ 47
Exposure ......................... 47
Shutter speed .................. 47
.................................. 14, 42
Sketch (Digital Filter) ....... 84
Slideshow ........................ 80
Slim (Digital Filter) ........... 84
Slow-speed Sync............. 53
Soft (Digital Filter)............ 84
Software ........................ 129
Sound .............................. 49
Sound Effects .................. 26
Speaker ............................. 7
Specifications ................ 123
Spot (AF Active Area)...... 56
Spot (Contrast AF) .......... 57
Spot metering .................. 52
Standby mode ................. 10
Star Stream ..................... 67
Starburst (Digital Filter).... 84
Status Screen .................. 11
Still picture ....................... 45
Strap................................ 30
Strap lug .......................... 30
Sunset ( S ).................. 45
H mode ........................ 47
Switch ................................ 8
Taking a self-portrait........ 41
mode ........................ 47
Text input....................... 103
Text Size ................... 26, 37
Thumbnail display ..... 43, 78
Time Setting .................. 105
Filter) ............................... 84
.................................. 73, 84
Tracking (Contrast AF) .... 57
Trailing Curtain Sync ....... 53
TTL phase-matching autofocus ......................... 54
........................................ 68
TV .................................... 81
I mode......................... 47
Unicolor Bold (Digital Filter)
.................................. 73, 84
Updating firmware ........... 27
........................ 82, 119, 129
USB terminal ................... 82
USER mode................... 103
User registration ................ 6
Using aperture ring ........ 115
Version update ................ 27
Viewfinder........................ 16
Volume label.................... 38
........................................ 84
7
133
7
134
White Balance ................. 68
Wi-Fi ................................ 89
Windows........................ 129
Wireless LAN................... 89
World Time .................... 105
We have paid close attention to the safety of this camera. When using this camera, we request your special attention regarding items marked with the following symbols.
Warning
This symbol indicates that ignoring this item could cause serious personal injuries.
Caution
This symbol indicates that ignoring this item could cause minor or medium personal injuries, or loss of property.
About the Camera
Warning
• Do not disassemble or modify the camera. High voltage areas are present inside the camera, with the risk of electric shock.
• If the camera interior is exposed due to dropping or otherwise damaging the camera, never touch the exposed portion. There is a risk of electric shock.
• Do not aim the camera at the sun or other strong light sources when taking pictures or leave the camera sitting in direct sunlight with a lens cap off. Doing so may cause the camera to malfunction or cause a fire.
• Do not look at the sun or other strong light sources through a lens. Doing so may lead to a loss of eyesight or cause vision to be impaired.
• If any irregularities occur during use, such as smoke or a strange odor, stop use immediately, remove the battery or the AC adapter, and contact your nearest service center. Continued use can cause a fire or electrical shock.
Caution
• Do not place your finger over the flash when discharging the flash. You may burn yourself.
• Do not cover the flash with clothing when discharging the flash.
Discoloration may occur.
• Some portions of the camera heat up during use. There is a risk of low temperature burns when holding such portions for long periods.
• Should the monitor be damaged, be careful of glass fragments. Also, be careful not to allow the liquid crystal to get on your skin or in your eyes or mouth.
• Depending on your individual factors or physical condition, the use of the camera may cause itching, rashes or blisters. In case of any abnormality, stop using the camera and get medical attention immediately.
About the Battery Charger and AC Adapter
Warning
• Always use the battery charger and AC adapter exclusively developed for this camera, with the specified power and voltage. Using a battery charger or AC adapter not exclusive to this camera, or using the exclusive battery charger or AC adapter with an unspecified power or voltage can cause a fire, electric shock, or camera breakdown. The specified voltage is 100 - 240V AC.
• Do not disassemble or modify the product. This can cause a fire or electrical shock.
• If the generation of smoke or strange odor from the product or other abnormality occurs, immediately discontinue using and consult your nearest service center. Continued use can cause a fire or electrical shock.
• If water should happen to get inside the product, consult your nearest service center. Continued use can cause a fire or electrical shock.
• If you see a lightning flash or hear thunder during use of the battery charger or AC adapter, unplug the power plug and discontinue using.
Continued use can cause damage to the product, fire or electrical shock.
• Wipe off the power plug if it should become covered with dust.
Accumulated dust may cause a fire.
• To reduce the risk of hazards, use only CSA/UL certified power supply cord set, cord is Type SPT-2 or heavier, minimum NO.18 AWG copper, one end with a molded-on male attachment plug cap (with a specified
NEMA configuration), and the other is provided with a molded-on female connector body (with a specified IEC nonindustrial type configuration) or the equivalent.
Caution
• Do not place or drop heavy objects on or forcefully bend the AC plug cord. Doing so may damage the cord. Should the AC plug cord be damaged, consult your nearest service center.
7
135
7
• Do not touch or short-circuit the terminal area of the AC plug cord while the cord is plugged in.
• Do not handle the power plug with wet hands. This can cause an electric shock.
• Do not drop the product, or subject it to violent impact. This can cause the product to breakdown.
• Do not use the battery charger D-BC109 to charge batteries other than the rechargeable lithium-ion battery D-LI109. Attempting to charge other types of batteries may cause an explosion or heating, or may damage the battery charger.
About the Rechargeable Lithium-ion Battery
Warning
• If any leakage from the battery should come in contact with your eyes, do not rub them. Flush your eyes with clean water and get medical attention immediately.
Caution
• Only use the specified battery with this camera. Use of other batteries may cause an explosion or fire.
• Do not disassemble the battery. Disassembling the battery may cause an explosion or leakage.
• Remove the battery from the camera immediately if it becomes hot or begins to smoke. Be careful not to burn yourself during removal.
• Keep wires, hairpins, and other metal objects away from the contacts of the battery.
and
• Do not short the battery or dispose of the battery in fire. This can cause an explosion or fire.
• If any leakage from the battery should come in contact with skin or clothing, it may cause irritation to the skin. Wash the affected areas thoroughly with water.
• Precautions for D-LI109 Battery Usage:
- USE SPECIFIED CHARGER ONLY.
- DO NOT INCINERATE.
- DO NOT DISASSEMBLE.
- DO NOT SHORT CIRCUIT.
- DO NOT EXPOSE TO HIGH TEMP. (140°F / 60°C)
136
Keep the Camera and its Accessories out of the
Reach of Small Children
Warning
• Do not place the camera and its accessories within the reach of small children.
1. If the product falls or is operated accidentally, it may cause serious personal injuries.
2. Wrapping the strap around a neck may cause suffocation.
3. To avoid the risk of a small accessory such as the battery or memory cards from being swallowed by mistake, keep them out of the reach of small children. Seek medical attention immediately if an accessory is accidentally swallowed.
Before Using Your Camera
• When the camera has not been used for a long time, confirm that it is still working properly, particularly prior to taking important pictures (such as at a wedding or when traveling). Contents of the recording cannot be guaranteed if recording, playback or transferring your data to a computer, etc. is not possible due to a malfunction of your camera or recording media (memory cards), etc.
About the Battery and Charger
• To keep the battery in optimum condition, avoid storing it in a fully charged state or in high temperatures.
• If the battery is left inserted and the camera is not used for a long time, the battery will over-discharge and shorten the battery’s life.
• Charging the battery a day before use or on the day of use is recommended.
• The AC plug cord provided with this camera is developed exclusively for the battery charger D-BC109. Do not use it with other devices.
Precautions on Carrying and Using Your Camera
• Do not subject the camera to high temperatures or high humidity. Do not leave the camera in a vehicle, as the temperature can get very high.
• Do not subject the camera to strong vibrations, shocks, or pressure. Use a cushion to protect the camera from vibrations of motorcycles, automobiles, or ships.
• The temperature range for camera use is -10°C to 40°C (14°F to 104°F).
• The monitor may appear black at high temperatures, but will return to normal at normal temperatures.
• The monitor may respond more slowly at low temperatures. This is due to liquid crystal properties, and is not a malfunction.
• Sudden temperature changes will cause condensation on the inside and outside of the camera. Place the camera in your bag or a plastic bag, and remove it after temperatures of the camera and surroundings are equalized.
• Avoid contact with garbage, mud, sand, dust, water, toxic gases, or salt.
These could cause the camera to breakdown. Wipe the camera to dry off any rain or water drops.
• Do not press on the monitor with excessive force. This could cause it to break or malfunction.
• Be careful not to overtighten the screw in the tripod socket when using a tripod.
Cleaning Your Camera
• Do not clean the camera with organic solvents such as thinner, alcohol, and benzine.
• Use a lens brush to remove dust accumulated on the lens. Never use a spray blower for cleaning as it may damage the lens.
• Please contact your nearest service center for professional cleaning of the CMOS sensor. (This will involve a fee.)
• Periodic inspections are recommended every one to two years to maintain high performance.
Storing Your Camera
• Do not store the camera with preservatives or chemicals. Storage in high temperatures and high humidity can cause mold to grow on the camera.
Remove the camera from its case and store it in a dry and well-ventilated place.
• Avoid using or storing the camera where it may be exposed to static electricity or electrical interference.
• Avoid using or storing the camera in direct sunlight or in locations where it may be exposed to rapid changes in temperature or to condensation.
7
137
7
About SD Memory Cards
• The SD Memory Card is equipped with a write-protect switch. Setting the switch to
LOCK prevents new data from being recorded on the card, the stored data from being deleted, and the card from being formatted by the camera or computer.
Write-protect switch
• The SD Memory Card may be hot when removing the card immediately after using the camera.
• Do not remove the SD Memory Card or turn off the power while the card is being accessed. This may cause the data to be lost or the card to be damaged.
• Do not bend the SD Memory Card or subject it to violent impact. Keep it away from water and store away from high temperatures.
• Do not remove the SD Memory Card while formatting. The card may be damaged and become unusable.
• Data on the SD Memory Card may be deleted in the following circumstances. We do not accept any liability for data that is deleted if
1. the SD Memory Card is mishandled by the user.
2. the SD Memory Card is exposed to static electricity or electrical interference.
3. the SD Memory Card has not been used for a long time.
4. the SD Memory Card or the battery is removed while the card is being accessed.
• If the SD Memory Card is not used for a long time, the data on the card may become unreadable. Be sure to regularly make a backup of important data on a computer.
• Format new SD Memory Cards. Also format SD Memory Cards previously used with other cameras.
• Please note that deleting data stored on an SD Memory Card, or formatting an SD Memory Card does not completely erase the original data. Deleted data can sometimes be recovered using commercially available software. If you are going to discard, give away or sell your SD
Memory Card, you should ensure that the data on the card is completely deleted or the card itself is destroyed if it contains any personal or sensitive information.
• The data on your SD Memory Card should be managed at your own risk.
138
About the Wireless LAN Function
• Do not use the camera in a place where electrical products, AV/OA devices, and so on generate magnetic fields and electromagnetic waves.
• If the camera is affected by magnetic fields and electromagnetic waves, it may not be able to communicate.
• If the camera is used near a TV or a radio, poor reception or TV screen glitch may occur.
• If there are multiple wireless LAN access points near the camera and the same channel is used, search operation may not be executed correctly.
• The security of your data stored, sent or received is your own responsibility.
In the frequency band used by the camera, along with industrial, scientific, and medical devices such as a microwave oven, premises radio stations (wireless stations requiring license) and specified low power radio stations (wireless stations not requiring license) for mobile object identification used in factory production lines, etc., and amateur radio stations (wireless stations requiring license) are operated.
1. Before using the camera, confirm that premises radio stations and specified low power radio stations for mobile object identification and amateur radio stations are not operated in the vicinity.
2. In the event that the camera causes harmful radio wave interference to premises radio stations for mobile object identification, immediately change the frequency being used to avoid interference.
3. If you have other troubles such that the camera causes harmful radio wave interference to specified low power radio stations for mobile object identification or to amateur radio stations, contact your nearest service center.
This camera conforms to the technical standards under the Radio Law and
Telecommunications Business Law and the certification of conformance to technical standards can be displayed on the monitor.
The certification marks of conformance to wireless technical standards can be displayed from [Certification Marks] of the D 4 menu.
Refer to “Using the Menus” (p.19) for how to use the menus.
Trademarks
• Microsoft, Windows, Windows Vista, and Photosynth are registered trademarks of Microsoft Corporation in the United States of America and other countries.
• Macintosh, OS X, QuickTime, iPhone, and App Store are trademarks of
Apple Inc., registered in the U.S. and other countries.
• Intel and Intel Core are trademarks of Intel Corporation in the U.S. and/or other countries.
• SDXC Logo is a trademark of SD-3C, LLC.
• Google, Google Play, and Android are trademarks or registered trademarks of Google Inc.
• Wi-Fi is a registered trademark of Wi-Fi Alliance.
• The N-Mark is a trademark or registered trademark of NFC Forum, Inc. in the United States and in other countries.
• iOS is a trademark or registered trademark of Cisco in the U.S. and other countries and is used under license.
• Facebook is a registered trademark of Facebook, Inc.
• Twitter is a registered trademark of Twitter, Inc.
• Tumblr is a registered trademark of Tumblr, Inc.
• This product includes DNG technology under license by Adobe Systems
Incorporated.
• The DNG logo is either a registered trademark or trademark of Adobe
Systems Incorporated in the United States and/or other countries.
• HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing, LLC in the
United States and/or other countries.
All other trademarks are the property of their respective owners.
• This product uses the RICOH RT font designed by Ricoh Company Ltd.
• This product supports PRINT Image Matching III. PRINT Image
Matching enabled digital still cameras, printers and software help photographers to produce images more faithful to their intentions. Some functions are not available on printers that are not PRINT Image
Matching III compliant.
Copyright 2001 Seiko Epson Corporation. All Rights Reserved. PRINT
Image Matching is a trademark of Seiko Epson Corporation. The PRINT
Image Matching logo is a trademark of Seiko Epson Corporation.
AVC Patent Portfolio License
This product is licensed under the AVC Patent Portfolio License for the personal use of a consumer or other uses in which it does not receive remuneration to (i) encode video in compliance with the AVC standard
(“AVC video”) and/or (ii) decode AVC video that was encoded by a consumer engaged in a personal activity and/or was obtained from a video provider licensed to provide AVC video. No license is granted or shall be implied for any other use.
Additional information may be obtained from MPEG LA, L.L.C.
See http://www.mpegla.com.
7
139
7
Announcement on the Use of BSD-Licensed Software
This product includes software licensed under the BSD License. BSD license is a form of license which permits the redistribution of the software provided that it is clearly stated that use is unwarranted, and a copyright notice and a list of licensing conditions are provided. The following contents are displayed based on the abovementioned licensing conditions and are not for the purpose of restricting your use of the product, etc.
Tera Term
Copyright (c) T.Teranishi.
Copyright (c) TeraTerm Project.
All rights reserved.
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:
1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
3. The name of the author may not be used to endorse or promote products derived from this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE AUTHOR “AS IS” AND ANY
EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT,
INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER
IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
OF SUCH DAMAGE.
140
All our cameras purchased through authorized bona fide photographic distribution channels are guaranteed against defects of material or workmanship for a period of twelve months from the date of your purchase. Service will be rendered, and defective parts will be replaced without cost to you within that period, provided the camera does not show evidence of impact, sand or liquid damage, mishandling, tampering, battery or chemical corrosion, operation contrary to operating instructions, or modification by an unauthorized repair shop. The manufacturer or its authorized representatives shall not be liable for any repair or alterations except those made with its written consent and shall not be liable for damages from delay or loss of use or from other indirect or consequential damages of any kind, whether caused by defective material or workmanship or otherwise; and it is expressly agreed that the liability of the manufacturer or its representatives under all guarantees or warranties, whether expressed or implied, is strictly limited to the replacement of parts as hereinbefore provided. No refunds will be made on repairs by non-authorized service facilities.
Procedure During 12-month Warranty Period
Any camera which proves defective during the 12-month warranty period should be returned to the dealer from whom you purchased the camera or to the manufacturer. If there are no representatives of the manufacturer in your country, send the camera to the manufacturer, with postage prepaid. In this case, it will take a considerable length of time before the camera can be returned to you owing to the complicated customs procedures required. If the camera is covered by warranty, repairs will be made and parts replaced free of charge, and the camera will be returned to you upon completion of servicing. If the camera is not covered by warranty, regular charges of the manufacturer or of its representatives will apply. Shipping charges are to be borne by the owner. If your camera was purchased outside of the country where you wish to have it serviced during the warranty period, regular handling and servicing fees may be charged by the manufacturer’s representatives in that country. Notwithstanding this, your camera returned to the manufacturer will be serviced free of charge according to this procedure and warranty policy. In any case, however, shipping charges and customs clearance fees to be borne by the sender. To prove the date of your purchase when required, please keep the receipt or bills covering the purchase of your camera for at least a year. Before sending your camera for servicing, please make sure that you are sending it to the manufacturer’s authorized representatives or their approved repair shops, unless you are sending it directly to the manufacturer. Always obtain a quotation for the service charge, and only after you accept the quoted service charge, instruct the service station to proceed with the servicing.
•
This warranty policy does not affect the customer’s statutory rights.
•
The local warranty policies available from our distributors in some countries can supersede this warranty policy. Therefore, we recommend that you review the warranty card supplied with your product at the time of purchase, or contact our distributor in your country for more information and to receive a copy of the warranty policy.
7
141
7
For customers in USA
STATEMENT OF FCC COMPLIANCE
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC
Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
* Consult the dealer or an experienced radio/TV technician for help.
FOR CALIFORNIA, U.S.A. ONLY
Perchlorate Material-special handling may apply.
The lithium battery used in this camera contains perchlorate material, which may require special handling.
See www.dtsc.ca.gov/hazardouswaste/perchlorate
For customers in Canada
Industry Canada (IC) Compliance Notice
This Class B digital apparatus complies with Canadian ICES-
003.
This device complies with Industry Canada licence-exempt
RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of the device.
Pour les utilisateurs au Canada
Industrie Canada (IC) Avis de Conformité
Cet appareil numérique de la classe B est conforme à la norme
NMB-003 du Canada.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence.
L’exploitation est autorisée aux deux conditions suivantes :
(1) l’appareil ne doit pas produire de brouillage, et
(2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.
142
Declaration of Conformity
Class B Personal Computers and Peripherals
Declare under sole responsibility that the product identified herein complies with 47CFR Parts 2 and 15 of the FCC rules as a Class B digital device. Each product marketed is identical to the representative unit tested and found to be compliant with the standards. Records maintained continue to reflect the equipment being produced can be expected to be within the variation accepted, due to quantity production and testing on the statistical basis as required by 47CFR §2.909. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. The above named party is responsible for ensuring that the equipment complies with the standards of 47CFR §15.101 to §15.109.
Information for Users on Collection and Disposal of
Old Equipment and Used Batteries
1. In the European Union
These symbols on the products, packaging and/ or accompanying documents mean that used electrical and electronic equipment and batteries should not be mixed with general household waste.
Used electrical/electronic equipment and batteries must be treated separately and in accordance with legislation that requires proper treatment, recovery and recycling of these products.
By disposing of these products correctly you will help ensure that the waste undergoes the necessary treatment, recovery and recycling and thus prevent potential negative effects on the environment and human health which could otherwise arise due to inappropriate waste handling.
If a chemical symbol is added beneath the symbol shown above, in accordance with the Battery Directive, this indicates that a heavy metal (Hg = Mercury, Cd = Cadmium, Pb = Lead) is present in the battery at a concentration above an applicable threshold specified in the Battery Directive.
For more information about collection and recycling of used products, please contact your local authorities, your waste disposal service or the point of sale where you purchased the products.
7
143
2. In other countries outside the EU
These symbols are only valid in the European Union. If you wish to discard used products, please contact your local authorities or dealer and ask for the correct method of disposal.
For Switzerland: Used electrical/electronic equipment can be returned free of charge to the dealer, even when you don’t purchase a new product. Further collection facilities are listed on the home page of www.swico.ch or www.sens.ch.
7
144
The CE Mark is a Directive conformity mark of the
European Union.
Hot shoe cover F
K
(Installed on camera)
Eyecup F
R
(Installed on camera)
Body mount cover
(Installed on camera)
Rechargeable Lithium-ion
Battery D-LI109
Battery charger
D-BC109
AC plug cord Strap
O-ST132
Software (CD-ROM)
S-SW156
Start Guide
Lenses you can use
Lenses that can be used with this camera are DA, DA L, D FA and FA J lenses and lenses that have an 9 (Auto) position on the aperture ring. To use any other lens or accessory, see p.113.
Memo
Copyright © RICOH IMAGING COMPANY, LTD. 2014
R02DTD15 Printed in Japan
SLR Digital Camera
3
4
1
2
5
6
7
The public link to your chat has been updated. You may view and manage your chat links after registration here.
Advertisement
Scene Modes
Advanced HDR Mode
Built-in Flash
Wi-Fi Function
Live View Image
Focus Method
Drive Mode
DA, DA L, D FA, FA J lenses, and lenses with an 9 (Auto) position on the aperture ring can be used.
The electronic level can be displayed in the viewfinder's EV bar scale and also on the Live View screen.
You can use direct keys, the control panel, or menus to change function settings.
You can share images using the built-in Wi-Fi function.
How to connect the camera to a computer to access memory card files?
Turn off the camera and connect it to the computer using a USB cable with a micro B terminal. Turn the camera on so the computer recognizes it as a removable disk for saving images. The camera cannot be operated while the USB connection is active.
How is the camera recognized when connected via USB in MSC mode?
When the USB connection mode is set to MSC (Mass Storage Class) via the D2 menu, the camera is recognized as a removable disk.
Login to continue