Loewe bild 5.32, bild 5.40, bild 5.48, bild 5.55 Operating Manual

Loewe bild 5

TV bild 5.55

bild 5.48

bild 5.40

bild 5.32

Operating manual

Loewe bild 5

Operating manual

Table of contents

Welcome! .......................................................................................3

Scope of delivery .......................................................................................... 3

Imprint ............................................................................................................ 3

About this operating manual ...................................................................... 3

Video ........................................................................................... 29

Video playback ............................................................................................30

Additional functions for DR+ archive playback .......................................31

For your safety ..............................................................................4

Technical information .................................................................................. 5

Audio/Radio ...............................................................................32

Audio playback ...........................................................................................33

Radio mode (DVB radio) ...........................................................................34

Radio mode (Internet radio) .....................................................................35

Remote control button mapping ................................................6

Operating controls on the TV set ............................................... 7

Photo .......................................................................................... 36

Photo display ............................................................................................... 37

Connections rear side of the device ..........................................8

Preparing the TV set ....................................................................9

Installing the TV set ...................................................................................... 9

Set covers ...................................................................................................... 9

Cable fixing .................................................................................................... 9

Connecting the TV set ................................................................................. 9

Switching the TV set ON/OFF .................................................................. 10

Web ..............................................................................................38

Apps .............................................................................................................38

App Gallery ..................................................................................................38

Browser ........................................................................................................39

System settings ........................................................................ 40

General information on the operation ......................................11

Functions..................................................................................... 41

Timer .............................................................................................................41

Software update .........................................................................................42

On-screen displays ..................................................................... 13

Explanation of keys ......................................................................................13

Explanation of symbols ..............................................................................13

Automatic menu info ..................................................................................13

Permanent clock display ............................................................................13

Initial installation ....................................................................... 14

Miscellaneous ............................................................................ 43

Conditional Access module (CA module) ...............................................43

Asterisk key function ..................................................................................43

Integrated features .....................................................................................44

Documentation ...........................................................................................44

Conformity / Manufacturer’s declaration ...............................................44

VESA standard ............................................................................................44

Home view ................................................................................... 15

Home view - Favourites ..............................................................................15

Technical data ........................................................................... 45

Environment .............................................................................. 46

TV ................................................................................................. 16

Setting the volume ......................................................................................16

Select station ...............................................................................................16

Status display ...............................................................................................18

Function list (TV mode) ..............................................................................19

Sources .........................................................................................................19

Electronic Programme Guide – EPG........................................................20

Picture in Picture (PIP) ................................................................................21

Teletext .........................................................................................................22

HbbTV / MediaText ....................................................................................23

Digital Recorder ..........................................................................................24

TV viewing with time shift .......................................................................24

Archive recording .....................................................................................24

Multi recording .........................................................................................25

DR+ archive ..............................................................................................26

DR+ Streaming ........................................................................................ 27

Follow-Me function .................................................................................. 27

Mobile Recording .....................................................................................28

Legal information ...................................................................... 46

Index ............................................................................................47

Service ........................................................................................ 48

2

Loewe bild 5

Operating manual

Welcome!

Thank you, for choosing a Loewe product and having placed your trust in us.

With Loewe you have not simply decided on a modern and technically innovative TV set, but for timeless design, sharp picture quality, brilliant sound for movies and music as well as intuitive operation with the

Loewe remote control unit, smart phone or tablet. In short, Loewe is perfect for home entertainment – Made in Germany.

This operating manual gives you a short overview of all functions and features of your new Loewe TV set. A detailed user manual file can be downloaded via the support portal of the Loewe homepage: www.loewe.tv/int/supportportal.

We look forward to welcome you as our customer and hope that you enjoy your Premium Home Entertainment made by Loewe.

Many features, one result: perfect Home Entertainment.

About this operating manual

For best results regarding safety and the longevity of the set, we recommend you read the chapter For your safety before switching it on for the first time.

Paragraphs which begin with the symbol indicate important instructions, tips or conditions for the following settings. Terms which you will find in the menus or printed on the remote control or TV set are written in bold type.

The necessary control elements are shown in the descriptions to the left of the text containing the instructions for action.

Depending on the connected accessory equipment the menus in the

TV set can differ from those described here.

All the station names, programme contents, the illustrated photos, titles, albums and album covers in this instruction manual are examples.

In addition to the remote control, a PC keyboard can be connected to one of the USB ports on your TV and then used to control your TV set.

In the operating manual, this symbol indicates places in which the use of a keyboard is particularly advantageous.

Just more entertainment.

The Loewe os is intuitive and graphically optimised. This is how you quickly find your desired content – from TV set to online.

In the operating manual refer to Home view.

The operating manual and the user handbook for your TV set are updated at irregular intervals. We recommend an occasional examination on the Support Portal of the Loewe homepage (see chapter

Miscellaneous , section Documentation ).

Perfectly networked.

Thanks to its numerous connections, your Loewe TV becomes your entertainment centre. Connect it to the

Internet, DVD/Blu-ray player, external speakers, etc.

General information on the operation of the

TV set

For further information on the user interface and the general operation of your TV set see chapter General information on the operation .

Hard disk for your TV archive.

Record the TV programme (1 or pause it and continue watching it at a later date. With DR+ (Digital Recording), all this is no problem for your Loewe TV set.

In the operating manual refer to Digital Recorder.

Customer

Care

Center

Your contact person.

We are happy to help you with any questions regarding your

TV set and other Loewe products.

In the operating manual refer to Service.

Interactive data services

In some countries the stations also broadcast interactive data services with their programmes, leading to the functions of individual keys not being available or only so to a limited extent. You can find out more about this in chapter TV , section HbbTV / MediaText .

Important information

Loewe does not accept any liability for the nature and content of receivable Internet services. This also applies to the Loewe MediaNet portal. With its devices, Loewe provides the technical platform that fundamentally enables such material to be received. Loewe cannot make any guarantees regarding changes in scope and content, particularly with regard to the future and after going to press. The receivable online services are not included in the delivery and can vary depending on the product and country.

Scope of delivery

LCD TV set

Mains cable

Antenna cable

Remote control Assist with two batteries

Attache-câble à velcro

Operating manual

Installation instructions for the setup solution

Wall mount WM 67 (bild 5.55)

Table Stand bild 5.40/48 (bild 5.40/48)

Table Stand bild 5.32 (bild 5.32)

Tool kit for mounting the set-up solution

Imprint

Loewe Technologies GmbH

Industriestraße 11

D-96317 Kronach www.loewe.tv

Printed in Germany

Editorial date 12/16-1.0 PS

© Loewe Technologies GmbH,

Kronach

ID: 4.1.12.0

All rights including translation, technical modifications and errors reserved. The screen graphics displayed are only an example. Depending on the device type, the available hardware/software components may be different.

(1 In case of device type bild 5.32 (version 56426x85) to an externally connected USB hard disk.

3

Loewe bild 5

Operating manual

For your safety

For your safety, and to avoid unnecessary damage to your unit, please read and follow the safety instructions below:

Intended use and ambient conditions

This TV set is intended exclusively for receiving and playing visual and audio signals. The TV set is designed for dry rooms (living rooms and offices). It must not be operated in rooms with high humidity (for example bathroom, sauna).

Please note that our TV sets are sensitive to dust and sooty particles in the ambient air.

Excessive environmental pollutions of this kind can lead to damage of the device up to a malfunction.

Pay attention to a clean ambient air, so that your device is not damaged.

Behind the panel plate of the LCD TV set, soot and dust deposits may appear without a soot generating source being visibly present. Such soot and dust deposits are also referred to as „fogging“ or „magic dust“. This phenomenon occurs sporadically, but in particular during the heating period and after renovations and in new buildings. As a cause for this, various factors are mentioned, see also reports on the

Internet.

The cleaning or replacement of the panel is excluded from the warranty claims in such cases, because it is not a defect of the device, but an external influence.

If the unit is used outdoors, make sure that it is protected from moisture (rain, dripping water and splashing water or dew).

High humidity and dust concentrations lead to leakage currents in the device. This can result in a shock hazard when touching it or even fire.

If you have moved the unit out of the cold into a warm environment, leave it switched off for about an hour to avoid the formation of condensation.

Do not place objects containing liquids on top of the unit. Protect the appliance against dripping and splashing water.

Candles or naked flames must be kept away from the TV set at all times to prevent it from catching fire.

Never place the TV set in a location where it is exposed to vibrations. This may lead to damage.

Transporting

Move the device in vertical position only. Get hold of the device on the upper and lower edges of the housing.

Do not stand it up on the bottom edge, so as to reduce the risk of damage and soiling. If the set has to be put down during packing/ unpacking, place the TV set with its entire front surface lying flat on soft material. Use a blanket or the fleece from the packing material as an underlay.

The LCD screen is made of glass or plastic and can break if not handled properly.

No pressure should be applied to the glass or the plastic during transport

Always wear rubber gloves to carry the TV set if the LCD screen is damaged and liquid crystal might be leaking out. In the case of skin contact immediately rinse thoroughly with water.

Power supply

Incorrect voltages can damage the unit. This device may only be connected to a power supply with the voltage and frequency indicated on the type plate using the supplied mains cable. The mains plug of the

TV set must be easily accessible so that the device can be disconnected from the mains at any time. When unplugging the unit from the mains, pull at the connector body and not at the cable. The cables in the mains plug could otherwise be damaged and could cause a short-circuit when plugged in again.

(1 3D function available on selected models.

Lay the mains cable so that it cannot be damaged. Do not step on the mains cable. The mains cable may not be kinked or laid over sharp edges nor be exposed to chemicals; the latter also applies to the unit as a whole. A mains cable with damaged insulation can cause electric shocks and poses a fire risk.

Air circulation and high temperatures

The vent slots on the rear panel of the set must always be kept unobstructed. Please do not place newspapers or cloths on/over the

TV set.

Make sure that there is at least 10 cm free space on the sides and above the set for air circulation, if the set is placed in a cabinet or on a shelf.

Like any electronic device, your TV set requires air for cooling.

Obstruction of the air circulation can cause fires.

10 cm

10 cm

10 cm

Prevent metal items, needles, paper clips, liquids, wax, or similar items, from getting into the interior of the device through the vent slots in the rear panel. Such objects can cause short circuits in the set, which could possibly cause a fire.

If something should get into the interior of the set then immediately unplug the mains plug of the device and contact the field service for more information.

About the LCD screen

The TV set with LCD screen you have purchased satisfies the most rigorous quality requirements and has been inspected with respect to pixel errors. Despite of thorough care when manufacturing the display, it cannot be 100% guaranteed that no subpixel defects will occur due to technical reasons. Please understand that these types of effects, as long as they are within the limits specified in the standard, cannot be considered as a device defect in terms of the guarantee.

Avoid displaying still images for long periods of time. It is possible that a copy of the image may remain visible.

TV sets with 3D function (1

Read the following safety instructions before using the 3D function of your TV set.

Please use only the Loewe 3D glasses for the Loewe 3D TV sets, which you can purchase as an accessory from your Loewe specialist dealer or in the Loewe online shop.

People with a visual disorder may not be able to perceive 3D effects or may only be able to perceive them to a limited extent. People who are sensitive to flickering images (e.g. those with epilepsy) should only use the 3D function after having consulted their doctor.

It might take some time for you to get used to the 3D glasses and before you can perceive the 3D effects properly.

Stop using the 3D function immediately if you experience any feelings of nausea, dizziness or malaise when viewing 3D content.

Supervise children whilst they are viewing 3D content, as they can be particularly sensitive to it.

Allow more time for a break after having watched 3D movies, so that you are able to relax. Failure to do so could result in headaches, fatigue, dizziness or malaise.

Position yourself comfortably in front of the 3D TV set and ensure that you are seated firmly. By doing this, you will avoid any injuries that may occur due to reacting to extreme 3D content.

Switch off any artificial light sources (e.g., energy saving lamp) between the TV set and the 3D glasses. These could impair the infrared reception or the TV picture may flicker as a result.

4

Loewe bild 5

Operating manual

For your safety

Set-up

Loewe flatscreen TV sets are specified for Loewe accessories. The TV set is suitable for mounting in many different ways. Note the assembly instructions regarding the different possible mounting options.

When using accessories from other manufacturers take care that the

TV set can be easily inclined or rotated on the respective mounting option.

For mounting options from other manufacturers with motor drive, make sure that the TV set cannot be rotated manually. The use of mounting options from other manufacturers with locks in certain positions is generally discouraged.

When rotating the TV set it is essential to ensure that the pressure exerted on the device frame is not too large. Especially in case of large-format displays there is a risk to damage the screen.

Before setting up the device, please check that the final location is suitable to bear the load of the device in terms of surface (sensitivity to pressure) and stability (statics).

This is particularly the case for the high-gloss painted surfaces and surfaces that are made from real wood / real wood veneer or plastic surfaces.

Place the TV set with the table or floor stand only on a level, sturdy, horizontal base. Particularly ensure that the set does not protrude to the front when placed in or on pieces of furniture.

Place the TV set in a normal position for use. TV set may only be used in an upright horizontal position. It may not be tilted by more than 10 degrees. The TV set must never be operated in portrait position, lying flat or hanging overhead from the ceiling.

Automatic shutdown

If the TV is not operated for 4 hours (adjustment of volume, programme change, etc.) the TV will automatically switch to stand-by mode to save energy. A prompt to terminate this shutdown process appears one minute before expiry of the 4 hours.

The automatic shutdown is active in the energy efficiency mode

Home Mode .

Automatic shutdown does not occur when using the radio without screen display (screen off).

Cleaning and care

Switch off the TV set with the main switch prior to cleaning.

Clean the TV set, the screen, and the remote control unit with a soft, moist, clean and colour-neutral cloth only, without any aggressive or scouring cleaning agents.

The speaker panel of your TV set is covered with textile. Vacuum the surface regularly using a soft brush set.

In case of dirt or stains:

Moisten a soft, colour-neutral cloth with detergent or normal stain remover and gently rub away the stain. You can also treat the mark/ stain directly with normal dry stain remover spray (vacuum up powder).

Do not moisten the covering fabric directly with detergent or stain remover (risk of encrustation). Do not use any solvents to clean the fabric.

Follow the manufacturer’s instructions when using stain removers.

There is an increased risk of encrustation when cleaning speaker panels with nicotine deposits.

D

±10°

Repairs and accessories

Never remove the back of the TV set yourself. Have your TV set repaired or serviced by authorised television technicians only.

Only use original accessories such as Loewe stands, if possible.

Set up the device where it is not exposed to direct insolation and where it is not exposed to additional heating by radiators.

When using the VESA mounting points, please refer to the information in chapter Miscellaneous , section VESA standard .

Supervision

Do not let children operate the TV set unsupervised and do not let them loiter and play close to the set. The set could tip over, be pushed off or pulled down from the stand surface and injure someone.

Do not allow the switched-on TV set to run unattended.

Volume

Loud music can lead to ear damage. Avoid extreme volume especially over long periods and when using headphones.

Thunder storms

Pull out the mains plug and all connected antenna cables from the TV set in a thunderstorm. Overvoltage caused by lightning strokes can damage the set via the antenna system, as well as via the mains.

The mains plug and all connected antenna cables should also be pulled out during long periods of absence.

Technical information

Switching off the TV set with the mains switch during operation or an inadvertent disruption to the power supply (e.g., power failure) can cause damage to the hard disk file system (1 and hence loss of the recorded broadcasts.

Never ever disconnect the USB storage device from the TV set during a copy process. Before switching off the set with the mains switch, we recommend you to switch it to standby mode.

However, if unexpected problems occur when operating the hard disk, formatting the hard disk may rectify this. You can find the corresponding menu items under System settings ט Control ט more ... ט Hard disks .

Loewe are not liable for the loss of data on the integrated hard disk (1 of your TV set. To avoid data loss, we recommend copying important recordings to an external storage medium.

(1 In case of device type bild 5.32 (version 56426x85) with an externally connected USB hard disk.

5

Loewe bild 5

Operating manual

Remote control

4

5

6

1

2

3

Remote control button mapping

Depending on the selected operating mode (TV/Video/Audio/Photo/Apps) and function (e.g. DR+, EPG, PIP, Teletext, HbbTV, etc.), the key assignment may differ from the assignment described here (see the corresponding chapter in this user manual).

7

8

9

10

11

12

13

14

15

16

32

31

30

29

28

27

26

25

24

23

22

21

20

19

18

17

1 Sound mute/on.

2 LED display for currently operated device.

3 Call the TV mode.

4 Reassign remote control to SetTop-Box (1 (presetting: Apple TV).

5 Pressing briefly: Open the DR+ archive.

Pressing longer: Call timer list.

6 Pressing briefly: Add current object to Home favourites (standard assignment) (1 .

Pressing longer: Open App Gallery.

7 EPG (Electronic Programme Guide) on/off.

8 Teletext/MediaText (2 on/off.

9 Pressing briefly: Call function list for the active operating mode.

Pressing longer: Call System settings.

10 V+/V- increase/reduce volume.

11 Pressing briefly: Call station list.

In the menu: confirm/call up.

12 Green coloured key: screen on/off in Audio/Radio mode.

13 Red coloured key: call preferred value-added network service, if available (2 .

14 Pressing briefly: skip backwards.

Pressing longer: winding backwards.

15 Pressing briefly: direct recording (with determination of recording duration) (3 .

Pressing longer: One Touch Recording (3 .

16 Pause / Start/pause the timeshift television (3 .

17 Stop / End timeshift (return to live image) (3 .

18 Pressing briefly: skip forwards.

Pressing longer: winding forwards.

19 Play / Start/continue timeshift television (3 .

20 Blue coloured key: call station function list

(selection of language/sound, subtitles or channel/video track).

21 Pressing briefly: Yellow coloured key: call history.

Pressing longer: Yellow coloured key: call last station.

22 Navigation on the user interface, select objects.

In the menu / lists: select/set.

23 P+/P– next/previous station.

24 Pressing briefly: step / level back.

Pressing long: close all displays.

25 Press briefly during an on-screen display: info display. Info text appropriate to the content that can assist you further, should you have any questions about your TV set.

Press briefly, without on-screen display: access status display. With status display open and repeatedly pressing the key call the detailed information on the broadcast.

Press longer: show Explanation of keys.

26 PIP (picture in picture) on/off.

27 Call up the Home view.

28 Select stations with numeric buttons directly.

In the menu: enter numbers or letters

29 Call Sources.

30 Reassign remote control to video device (1 (presetting: BluTech Vision 3D).

31 Call radio mode (standard assignment) (1 .

32 Switches the TV set on (mains switch must be turned on) or switches to standby mode.

Press briefly while TV set is switched on: TV set and all CEC-enabled devices connected to the HDMI ports will be switched off to standby (System Standby).

remote control.

Depending on the settings HbbTV mode on/off, start behaviour of HbbTV station ( System Settings ט Control ט more ...

ט HbbTV ).


6

Loewe bild 5

Operating manual

Operating controls on the TV set

Preparing the remote control unit

Functions of the operating controls Preparing the remote control unit

Removing the battery protection

The remote control is supplied with batteries. To make them ready for use, remove the plastic flag out as shown below.

Inserting or replacing batteries

Press on the embossed arrow whilst pushing the battery cover down.

Only use leak-proof micro-cells of the LR 03 (AAA) Alkali-Manganese type. Do not use different types of batteries and old and new batteries together.

The batteries used must not be exposed to excessive heat such as sunlight, fire or similar!

The position of the batteries is indicated in the battery compartment

(in opposite directions). Pay attention to the correct polarity of + and – when inserting the batteries.

4

3

1

2

1 Mains switch:

The mains switch is located on the bottom of the set.

Always return the TV set to Standby mode before switching it off with the main switch.

If the batteries are too weak after longer use, the TV set prompts you to change the batteries. Dispose of used batteries in an environmentally friendly way (see chapter Environment / Legal information ).

Push the cover back on from below after having inserted the batteries.

Adjusting the remote control unit for operating the TV set

Press the TV key .

2 IR receiver:

Infrared receiver for receiving the remote control commands.

3 Display: white: TV set in standby.

Depending on the ambient brightness, the white LED display is dimmed (1 and lights up with a different degree of brightness.

If the TV set is in quick start mode, the white LED display is not dimmable and starts with full brightness.

white, intermittent: TV set starts.

green: TV set switched on.

red:

blue: timer recording active.

TV set in standby and background operation active (EPG data updating, software update or DR+ streaming server function).

4 Infrared transmitter:

When showing 3D content (2 , the 3D glasses Loewe Active

Glasses 3D are controlled via the infrared sensor.

(1 Automatic dimming depending on the room brightness (OPC) must be activated ( System settings ט Picture ט more ... ט Auto dimming ).


7

Loewe bild 5

Operating manual

Connections rear side of the device

Position and function of the connections

K

1 2 12

(2B

3 4 5 6 7 8 9 10 11

(1A

11

(1B

1 Slot for Kensington lock

2 AC IN - Mains connection

Mains socket – 220-240 V ~ 50 / 60 Hz

3 LAN - Network connection

RJ-45 – Ethernet / Fast Ethernet

4 HDMI 1 ARC - HDMI input 1 (with A udio R eturn C hannel)

HDMI – Digital Video IN (4K@60Hz (4 )/Audio IN/OUT

5 HDMI 2 - HDMI input 2

HDMI – Digital Video IN (4K@60Hz (4 )/Audio IN

6 ANT TV - Antenna/cable analogue / DVB-T/T2 / DVB-C

IEC socket – 75 Ohm / 5 V / 80mA

7 ANT SAT 1 - Satellite antenna (Sat tuner 1) DVB-S/S2

F socket – 75 Ohm / 13/18 V / 500mA

8 ANT SAT 2 - Satellite antenna (Sat tuner 2) DVB-S/S2

F socket – 75 Ohm / 13/18 V / 500mA

9 SPDIF OUT - Audio output (digital)

Cinch socket (orange)

10 USB 3.0 - USB connection

USB type A – USB 3.0 (max. 900mA)

11 FEATURE KIT - optional (1A

MOTOR - rotating stand control (1B

12 DIGITAL AUDIO LINK - Surround audio outputs (digital) – (RJ45) (2

13 HEADPHONE Headphone connection

Jack 3,5 mm – Headphones 32–200 Ohm

14 HDMI 3 - HDMI input 3

HDMI – Digital Video IN (4K@60Hz (4 )/Audio IN

15 AUDIO OUT - Audio output (analogue) L/R – (Jack 3,5 mm)

16 RS-232C - Serial interface (3 – (RJ12)

17 AV - Micro AV socket (3

Audio/Video IN with Scart adapter: Y/C (S-VHS/Hi 8)

CVBS (VHS/8 mm)

RGB

L/R

Audio/Video IN with VGA adapter: PC/STB video signal

L/R

18 COMMON INTERFACE - CI slot 1 (standard V1.3)

19 COMMON INTERFACE - CI slot 2 (standard V1.3)

20 HDMI 4 UHD - HDMI input 4 (4

HDMI – Digital Video IN (4K@60Hz)/Audio IN

21 USB - USB connection


22 USB - USB connection


(1 A: in case of bild 5.55 (56428x50) / bild 5.48 (56430x50) / bild 5.40 (56427x50). Optional connection for individual country-specific variants of the TV set.

B: in case of bild 5.55 (56428x51). Connection for a motorized swivel stand.

(2 A: in case of bild 5.55/48/40. B: in case of bild 5.32 DR+

(3 The adaptor is available as an accessory from your dealer.

(4 Only available for device type bild 5.55/48/40.

8

19

18

17

16

15

14

13

12

(2A

22

21

20

Loewe bild 5

Operating manual

Preparing the TV set

Installing the TV set Connecting the TV set

Mounting options / Installation notes

Mount the supplied mounting option. While doing so, look for the corresponding directions in the installation instruction.

Your Loewe dealer can assist you in finding other mounting options that suit your needs.

Choose a place for installing your TV set where no bright light or sunlight shines directly onto the screen. This could cause reflections which impair the picture.

3 times the screen diagonal can be taken as a guide value for the viewing distance (e.g., for a 40-inch set approx. 3 m for SD signal). The viewing distance can be reduced with an HD/UHD signal.

Connecting to the mains supply

Remove the cover for the connections.

Connect the TV set to a 220-240V mains socket:

First plug the smaller plug (small connector) of the power cord into the AC inlet (AC IN) on the TV set, and then the larger connector (Euro plug) into a mains socket.

Set covers

Covers for rear and side connections

In order to remove the rear side cable covers pull them simply from the device.

To fit the cover, insert the lugs at the top edge of the cover into the corresponding cut-outs in the rear panel and push up the cover until it snaps in.

The side cover of the TV set can also be completely removed. For this, open it as far as it will go and gently pull on the open cover.

Connecting antennas

Cable (analogue) / DVB-C / DVB-T antenna:

Plug the cable of antenna, cable TV system or room antenna into the

ANT TV socket.

If you want to use analogue cables / DVB-C connection and a DVB-T antenna together, use an external antenna switch (available from your dealer).

The cover detaches from the holder and gives free access to the connection area. To replace the cover, simply push it until it latches back into place.

A cable bushing connects the lateral and posterior terminal region. In this way you can pass the cables of the lateral connections through and lay them out together with the rear connecting cables.

Satellite antenna DVB-S:

Depending on the used satellite system, connect a connecting cable from the multi-switch or directly from the LNC to the ANT-SAT and

ANT-SAT2 sockets of the TV set respectively.

When connecting the TV set to a single cable community antenna, connect the ANT-SAT and ANT-SAT2 sockets directly to the appropriate SAT antenna socket.

When connecting the TV set to a DiSEqC single cable community antenna (in accordance with EN 50494), connect the ANT-SAT socket directly to the appropriate SAT antenna socket.

In case of a DiSEqC one cable communal system you require only one antenna cable. Further distribution of the signal to the two reception routes is accomplished by the TV set’s satellite tuner.

It is possible, however, to continue using an existing SAT cabling with two antenna cables in a DiSEqC one cable communal system.

If two transmission channels of the DiSEqC single cable community exist, one system channel is used per satellite antenna cable.

Ask your dealer in this regard.

Cable fixing

Using the Velcro cable tie supplied, you can fix the rear cables.

For the bild 5.32/40/48 this is done by a fixation at the table stand (see installation instructions of the table stand).

In case of the bild 5.55 with wall mount WM67 you can thread the Velcro cable tie through the two openings of the rear wall.

Cable analogue /

DVB-C

R TV

DVB-T DVB-S bild 5.32/40/48 bild 5.55

9

Loewe bild 5

Operating manual

Preparing the TV set / Switching TV set on/off

Connecting the TV set to the Home network

You may link your TV set to the home network by a wired connection

(Ethernet, Powerline adapters separately available) or by a wireless radio connection (WLAN). For wireless connections, the TV set has an internal WLAN antenna.

In order to play back data from your home network your Loewe TV supports the UPnP AV standard.

You call the network wizard to configure the network adaptor ( System settings ט Multimedia/Network ט Network settings ט Networking ).

Under no circumstances may the TV set be wired and at the same time connected by a wireless connection to the same network, e.g. router. This may cause severe operational faults!

Example for a wired connection

Connect the LAN socket of your TV set to the LAN switch/router of your home network with a network cable (available from your dealer).

TV set LAN switch/router PC

Switching the TV set ON/OFF

Switching TV set to the standby mode

Switch the mains switch on the bottom side of the device to position I .

The indicator in the control panel on the front side lights up white. The set is now in standby mode.

Switching the TV set on by means of the Remote control

Press the on/off key .

Or:

Press the TV key .

The previously watched station will be called.

Or:

Press numerical keys 1-9 .

The corresponding station will be called.

After switching on the TV set, it takes a few seconds for further operating commands to be processed (Exception: Quick Start Mode, see below). Your TV set is ready to operate as soon as the status indicator in the control panel lights up in green.

DSL

Switching the set off with the remote control (Standby)

Press the on/off key .

Before switching off the set with the mains switch, we recommend you to switch it to standby mode.

Example for a wireless connection

You can connect the TV set to your home network by a wireless radio connection via the WLAN antenna inside the set.

Shadow effects of various materials, such as reinforced concrete, metal surfaces, etc., attenuate the WIFI signal sometimes significantly or completely.

Switching TV set and connected additional devices off

(System Standby)

Press the On/Off key longer:

TV set and all CEC-enabled devices connected to the

HDMI ports will be switched off to standby (System

Standby).

TV set WLAN router PC

Quick start mode

If you enable the Quick Start Mode and you switch on the TV set from standby, the TV picture can be immediately seen without delay. You can specify the times at which your device will be in the Quick Start

Mode. Please note that in this case you will have a higher energy consumption.

You can find the Quick Start Mode under System settings ט Control

ט Quick start mode .

Default setting for the Quick Start Mode: off .

DSL

Help for configuration problems

Loewe cannot provide any support for PC hardware and software or network components owing to the diverse configuration options with home networks.

Please contact the administrator of your home network and/or specialist dealer for support when setting up and for maintenance of network connections, storage media, media server software and network devices such as routers.

10

Loewe bild 5

Operating manual

General information on the operation


The most important keys for navigation will be explained in general.

The numbers in the text refer to the figure showing the remote control in chapter Remote control .

The arrow keys 22 help you to navigate in the menus and lists of the

TV set and for selecting menu items. They are arranged in the middle of the remote control in a circle around the OK key 11 . Later in this user guide they will be represented as follows:

Structure of the Menu screen

Basically, the structure of the different menu screens is similar, regardless of whether it is e.g. a wizard, rendering media content or a setup menu. The structure is explained by means of three different figures.

Screen structure: Wizard

A

Select the desired item.

B

The OK key 11 is used to confirm a selection, for calling the highlighted menu item and for opening the station list. In this user guide, an instruction for this key looks like the following:

OK confirm.

C

Using the numerical keys of your remote control 29 you enter programme channels and teletext pages directly. With key you open the source menu. In this user guide, entering numbers with numerical keys is shown as follows:

(A) Title bar with name of the wizard and the current operating step.

(B) Selected items, whose number can be different according to the operating step.

Entering programme channel directly.

The numerical keys are also used to enter text (see chapter General information on the operation , section Entry of characters by remote control ).

(C) Bottom line showing the available operating controls. If required, instructions and information are inserted.

The Home view is the central overview page for all of your TV set‘s operating modes. You reach Home view with the HOME key 27 .

Screen structure: Rendering of media content (example: Audio player)

A B

C

HOME: Calling the Home view.

Pressing the BACK key 24 briefly brings you one level up in the wizard.

Pressing the BACK key longer closes all opened displaying. An example for the BACK key in this user guide:

BACK: Stop text entry and exit entry box.

D

Pressing longer on the NFO key 25 displays an explanation of the most important key functions of the current operating mode (e.g. TV mode, teletext, PIP, etc.).

E

(A) Title bar with selected album / subdirectory.

(B) Menu item Back to exit the menu or to go back to the previous menu item.

(C) Selection of album or title.

(D) Time bar.

(E) Bottom line with the different symbols for controlling the playback function.

continued on the next page

ט

11

Loewe bild 5

Operating manual


Screen structure: Setup (example: picture)

A B C

Entering characters with on-screen keyboard

For certain functions, entering letters or characters is required, e.g., for

Web addresses (URLs) in the browser or for renaming archive entries.

An on-screen keyboard appears for entering text.

(A) Selected function in the Home overview (here: system settings).

(B) Home Menu System settings , with selected menu item Picture .

(C) Help text for the selected menu item Picture > Contrast .

Navigation: Selection of elements (example: On-screen displays)

Highlighting and thus selecting the symbols/elements or menu items on the screen can be effected by the arrow keys on the remote control.

So you can see all the time where you are. As soon as there is a bar above a symbol or text, this is a selected element.

Highlight character / on-screen button,

OK accept character.

In the event of letters with a triangular, additional letters are displayed when pressing the OK button longer (2 sec). For the selection of special characters use the

.-/ field.

To conclude the entry:

Select Adopt ,

OK confirm.

B C A

(A) Selectable elements / menu items.

(B) The text in the line where the marker is currently located is white.

(C) Move the selection marking by means of the arrow keys to the menu item to be set.

The position of the marking is to see by a grey rectangle.

In most cases, the marked menu item will be automatically adopted. The font colour of the previously active item will change to grey, that of the newly selected item to white.

In a few menus, to confirm a selected menu item is required by pressing OK .

8

9

0

6

7

4

5

2

3

Key

1

Entry of characters by remote control

Alternatively to the on-screen keyboard you can also enter the desired characters by means of the remote control (as with the keypad of a mobile phone).

Select text entry field.

Under the first letter of the name you will see a line indicating the current input position.

Input position one character to the right (also for blanks).

Input position one character to the left.

Enter the letters one after another. When using the remote control, press the numerical keys just as on a mobile phone keypad (0-9) until the desired symbol is displayed.

Characters (uppercase - lowercase)

[space] 1

A B C 2 Ä Æ Ã Å Ā À Á Ć Ç Č - a b c 2 ä æ ã å ā â à á ć ç č

D E F 3 Ė Ë Ē Ę Ê È É - d e f 3 ė ë ē ę ê è é

G H I 4 Ï Ī Į Î Ì Í - g h i 4 ï ī į î î ì í

J K L 5 - j k l 5

M N O 6 Ö O E Õ Ō Ô Ò Ó Ø - m n o 6 ń ñ ö o e õ ō ô ò ó ø

P Q R S 7 ß - p q r s 7 ß

T U V 8 Ü Ū Û Ù Ú - t u v 8 ü ū û ù ú

W X Y Z 9 - w x y z 9

. 0 - / _ : + , ; ? ! = & # % ~ @ $ * ’ ( ) ” § \ { } [ ] < > ´ ` ^ |

To conclude the entry:

Select Accept ,

OK confirm.

12

Loewe bild 5

Operating manual

On-screen displays

Explanation of keys

An explanation of the main operating keys that can be used at the moment, can be displayed.

The availability of the key explanation is dependent on the currently active operating situation.

INFO press longer: show Explanation of keys.

INFO or BACK: hide Explanation of keys.

Explanation of symbols

On screen pages with operating symbols in the bottom line, an explanation of the function appears as soon as the symbol is selected.

Automatic menu info

The automatic menu info provides an info text for the selected menu item appropriate to the on-screen display that can assist you further with the operation of your TV set.

An on-screen display is displayed.

The factory setting is that the info display is shown automatically for each menu item. In this case you can temporarily hide the info texts with the INFO key .

Permanent clock display

The clock display can be permanently shown. It is always visible as long as no other display is made.

You can switch the permanent clock display on or off in Home view under System Settings ט Control ט more ...

ט On-screen displays .


13

Loewe bild 5

Operating manual

Initial installation

Initial installation wizard

Initial installation after switching on for the first time

The Initial installation wizard starts automatically with an initial installation. It may be called repeatedly again.

If a parental lock is activated, the access code must be entered before repeating initial installation.

First installation wizard routine

The selected settings affect the routine of the Initial installation wizard.

Menu language

Select desired Menu language .

Selecting the language of the user guidance is the wizard’s first step. Then you simply follow the instructions on your TV screen.

Proceed to next step.

A licence agreement will be displayed.

Scroll through the licence agreement.

the next step.

Energy efficiency

(continued)

Home mode:

The emphasis for home use is on low energy consumption. The automatic dimmer is activated.

Premium mode:

This mode optimises the settings to a brighter environment at a higher energy consumption. The automatic dimmer is activated.

The use of this energy efficiency setting must be confirmed afterwards once again.

Shop mode:

The picture settings are aligned to operation in the presentation room. The automatic dimmer is deactivated. If the ambient brightness diminishes, the energy consumption is not reduced.

The use of this energy efficiency setting must be confirmed afterwards once again.

Not all image and sound settings will be stored in the shop mode. These settings will be reset to the works setting after re-starting.

The presetting can be changed later in System settings under Control ט Energy efficiency .


Location of

TV set

Energy efficiency

Select Energy efficiency.

Determine how energy efficient your TV set shall be. The value for the contrast (and thus the brightness of the background lighting) is adapted and the automatic dimmer activated or deactivated depending on the presetting.

Select Location of TV set .

For certain locations (e.g., Australia), there is finally a selection screen where you can indicate in which state/territory the device is being operated.


Follow the instructions on the screen for the following steps.

With the selection of the TV set location the countryspecific presettings are adopted.

In most cases, the predetermined parameters can be adopted.

14

Loewe bild 5

Operating manual

Home view

Home view Home view - Favourites

The Home view is the central overview page for all of your TV set‘s operating modes.

The left selection bar allows you to access the operating modes TV , recordings , sources , and apps . By means of System settings you have access to more functions and you can configure your TV set.

The right part of the screen displays the favourites depending on the selected operating mode (see also right column) and the available sources.

The number of selectable items varies depending on the TV equipment, network connection, available media/media servers and connected gadgets.

Call Home view


You will find your favourites on the right of the individual operating modes.

By selecting the operating mode, the favourites are filtered accordingly.

When selecting Home, the favourites of all operating modes are displayed together.

After an initial installation, some favourites will already be automatically created depending on the installation site of the TV set and of existing Internet links (e.g. TV stations, online links).

Creating favourites

In the operating modes of the TV set you can define the current object

(e.g. station, music title, teletext page, website, photo, etc.) as favourite.

In the selected operating mode, the active object will be added as favourite and placed at the end.

Create favourite.

If there are more favourites than can be shown on one page, this will be indicated by rectangular symbols in the upper line of Home view. Example:

Three pages with favourites exist. The first page of them is indicated. Equivalent is the display with the symbols for the source selection.

P+/P– Scrolling through the individual pages.

OK call.

Select menu item / Favourite / Source,

Description of the individual sections/functions:

Home: Under the item Home all favourites of the different sections are summarized.

TV: You can access the TV favourites via the item TV .

See chapter TV for further information.

Recordings: The item Recordings gives you access to videos from local sources. (USB, DR+)

See chapter Recordings for further information.

Sources: Here you have access to the ports on your TV (HDMI, AV, video, USB, etc.)

See chapter Sources for further information.

Apps: Via the menu item Apps you can find multimedia content on the Internet (App Gallery), Internet and DVB radio and a fullfeatured browser.

See chapter Apps for further information.

Editing favourites

You can edit the existing favourites in Home view. Change the sequence of your favourites as you wish or delete favourites you do not need any more.


MENU: Change favourite.

Move favourite or delete it (see below).

Moving favourites

BACK:

Select the favourite to be changed.

Move favourite to new position.

Finish procedure.

Deleting favourites

TEXT: Delete selected favourite.

BACK: Finish procedure.

System settings : In menu item System settings you find the configuration menu of the TV set e.g., with settings for picture, sound, connections or sound components.

See chapter System settings for further information.

15

Loewe bild 5

Operating manual

TV

Volume / Station

TV

In TV mode that can be selected via the Home overview, you can use the basic TV functions of your TV set. In TV mode you will have numerous functionalities at your disposal as, for instance, PIP, EPG and, if offered by the station, HbbTV (hybrid broadcast broadband television).

By means of the function list you may call additional options and settings all around TV operation.

Selecting a station out of the station list

In normal TV mode, without other displays:

OK Call station list.

Setting the volume

Switching sound off/on

Sound off.

Sound on: Press key again or increase the volume using V+ .

Setting the volume

V+/V– Volume up/down.

The volume indicator will be displayed in the center of the screen.

The volume control bar can be deactivated in the menu System settings ט Control ט more ... ט

On-screen displays .

OK

Mark stations.

The marked station will be called.

Changing the station list


OK Call station list,

Select station

Select station with P+ / P–

When using Instant Channel Zapping, you can very quickly switch to other stations. The instant channel zapping technology uses the second tuner in the background in order to pre-select the next stations. Due to this pre-selection, you can now switch to this channel within a very short time.

While using the digital recorder DR+ (1 (timeshift operation, archive recording, multi recording (2 ) or in PIP mode, Instant Channel Zapping is not available. Switching is done at „normal“ speed.

For encrypted stations Instant Channel Zapping is only possible to a limited extent.

P+/P– Station up/down.

The number and the name of the station along with the title of the programme and that of the next programme will be briefly shown. Also, the status display with time/ date and programme-dependent symbols appears.

The symbols of the status display are described in chapter TV , section Status display .

MENU: Call Overview of station lists.

OK Call station list selection.

Mark the desired list.

The station list will be changed according to the selection. The list will be adopted automatically.

Select station using the numerical keys

If you select an unoccupied station position, the next available station is selected.

long short short long

all short

1-digit stations

Press the numerical key a little bit longer: The channel will change immediately or press the numerical key briefly, the station changes after 2 seconds (changes immediately if up to 9 stations are stored).

2-digit and 3-digit stations

Press first (and second) numerical key briefly. Keep the last numerical key depressed a little bit longer: The channel will change immediately or: press all the numerical keys briefly, the channel changes two seconds after the last number has been entered (with up to 99 or 999 saved channels it will change immediately).

4-digit stations

Press all four numerical keys briefly, the station changes immediately.

Explanations of the station lists:

The number and the names of the possible station lists depend on the available signal sources (antennas, TV reception networks, etc.).

ASTRA LCN

Analogue

DVB-C

DVB-T

Personal list

AV list

Manage list

Only stations from the selected source / reception network are indicated in the station list.

Only stations of the selected personal list are indicated in the station list. The name of the list may be changed.

Exclusively AV inputs are shown in the station list.

Call up the station list editing menu ( settings ט Stations ט Station lists TV

System

).


(2 Not available for device type bild 5.32 (version 56426x85).


ט

16

Loewe bild 5

Operating manual

TV

Stations

Selecting stations by means of the expanded station list



call function list.

Mark expanded station list ,

call expanded station list.

Selecting stations by personal lists

You can save your preferred stations in personal lists (e.g., for several users). Each personal list can contain up to 99 stations.

Personal list available (creating a new personal list via Manage list

ט

New personal list ).

In normal TV mode, without other displays.

OK Call station list.

MENU: Station list selection.

P+/P– Scrolling in the station list page by page.

OK

Or:

Mark stations.

The marked station will be called.

For numerical sorting: Enter the channel number. The marker will jump to the selected station.

OK The marked station will be called.

Mark the desired personal list,

The station list will be changed according to the selection. The list will be adopted automatically.

Move to the newly selected list.

Mark the station.

OK The marked station will be called. Or:

Select station directly with numerical keys .

For alphabetical sorting: Enter the first letter. The first station for the specified letters is marked.

Explanation of the icons following the station names:

Locked station.

Mark the station.

OK The marked station will be called.

HDTV station.

DVB-T station (digital terrestrial via antenna).

Filter and sort options of the expanded station list

Using the on-screen buttons on the bottom line of the expanded station list you can filter and sort the station list by various options.

DVB-C station (digital via cable).

DVB-S station (digital via satellite).

MENU: Switching between list and bottom line.

Scrambled station.

0..9

Numerical sorting of the station list.

A..Z

Alphabetical sorting of the station list.

Searching This allows you to do targeted searches for stations.

The station name is to be entered via the on-screen keyboard. The entry is described in chapter General information on the operation .

Signal source

Select the signal source, the stations of which are to be displayed in the extended station list (e.g.,

Analogue, DVB-C, DVB-T, ASTRA LCN, Personal station list, AV list).

History

Recently selected stations are saved in History.


Yellow button: call History.

All stations Here you can filter the content of the station list according to various criteria. Shall All Stations , only HD stations , stations that are Locked or

Scrambled or Unscrambled , CI+ Protected stations be indicated.

Select entry,

OK call.

The last station can also be accessed directly:

Yellow button press longer: Call last station.

17

Loewe bild 5

Operating manual

TV

Status display

Status display


INFO: Show status display.

Explanations of the symbols in the status display (continued):

Transmitted audio signal:

Mono

Dual channel

Mono audio transmission analogue.

Dual channel sound transmission (Sound1/

Sound2) analogue.

1+1

Dual channel sound transmission (Sound1/

Sound2) digital.

ܐ Stereo sound transmission digital (PCM).

Dolby Audio Dolby Digital Bitstream Transmission.

MPEG MPEG sound transmission.

Below you see the number and the name of the station and (if available) the title of the current programme.

The bar (if available) indicates the progress of the current programme. If information about the current programme is available, this can be called by pressing the INFO key again.

A window with button descriptions is displayed in the bottom right corner. The automatic display of the

Explanation of keys with status display can be switched off via System settings ט Control ט more ... ט

On-screen displays ט Key explanation .

By pressing the INFO key longer the Explanation of keys can be displayed regardless of the status display

(see also chapter On-screen displays , section

Explanation of keys ).

The status display is shown automatically every time you change channels.

The status display is hidden automatically at the end of the display time.

If you want to hide the status display manually before the display time ends, you can do this with the BACK key .

Transmitted audio channels:

Dolby Audio - DD

Dolby Audio - DD+

Dolby Audio - TrueHD

Selected listening mode (2 :

܃

Playback of centre sound or mono (left/right).

܃ Playback of front sound (L/R stereo).

܃

܃

܃

܃6RXQG

SURMHFWRU

܃([WHUQDO

VSHDNHUV

Playback of front and centre sound.

Playback of front and surround sound.

Playback of front, surround and centre sound.

Playback of sound via sound projector.

Playback of sound via speakers connected to an external amplifier.

If the number of speakers appears in brackets, the sound of missing speakers is transmitted by the existing speakers (virtually). The Dolby

Virtual speaker (VS mode) developed by Dolby is activated for the virtual sound reproduction in sound mode (4) and (5) . In sound mode

(3) , proprietory settings of Loewe are used for the virtual reproduction.

Explanations of the symbols in the status display:

General symbols:

Language/sound selection available.

Subtitles available.

Channel selection for multi-channel providers.

3D programme (1 .

HDTV programme.

HbbTV mode available from this station.


(2 Not available for device type bild 5.32 (version 56426x85).

18

Loewe bild 5

Operating manual

TV

Function list / Sources

Function list (TV mode)

The function list contains settings and additional options. Die individual

List items will be briefly explained as follows:

The function list can be opened for the current station or the selected station list. Depending on this, some list items may possibly not be available.

Sources

Selecting the AV source


Open Sources .

Function list for the current station:

MENU: Call function list.

Function list for the selected station list:


call function list.

Select desired connection,

OK switch over.

If the selected AV source provides a signal (picture), it should be visible now.

When selecting VIDEO , you switch to the signal source

Cable analogue , channel E36 . The TV set can display the signal from an external source via the antenna input

TV ANT .

Select function,

OK call.

Explanations of the symbols in the function list:

Expanded station list. Exchanging the station lists.

Recordings. Here you can call up a recording dialogue.

Detailed info. Calling additional information on the current programme.

Favourite. Storing the current station as a favourite.

Multiroom playback. Accessing other multiroom devices in the home network and making settings.

Language / sound. Selecting other languages and audio formats

(if available).

Subtitles. Display programme subtitles (if available).

Picture settings.

Make frequently used picture settings.

Sound settings.

Adjusting all available audio settings.

Headphone volume. Adjustable irrespective of the volume of the device speakers..

Store station. Here you can save the current station to a list that is selected in the following step.

Expanded station list. Here, you can open the entire station list in full screen mode. You can filter it according to various criteria.

19

Loewe bild 5

Operating manual

TV

Electronic Programme Guide

Electronic Programme Guide – EPG

EPG stands for Electronic Programme Guide and provides you with on-screen broadcast details. With the system, as with a printed programme guide, you can learn about the current broadcast.

In addition broadcast can be sorted according to certain topics, memorised, and also recordings can be programmed.

Adapting the EPG Overview

EPG: Switch EPG on / off

MENU: Open context menu

Select view.

OK Confirm selection.

Starting and ending EPG

EPG: Switch EPG on / off.

or:

EPG is only available for DVB stations.

The first time you start EPG, a wizard will start that guides you through the necessary pre-settings.

Depending on the number of stations selected for

EPG, it may take some time until the broadcast information is displayed.

PIP: change view

Calling up additional information about the broadcasts

INFO: Call up detailed information.

EPG Operation

In the left column there is a list of stations of the selected source/ station list (e.g. DVB-C, personal list).

P+/P– Scrolling in the station list page by page.

Scrolling in the station list.

Scrolling through the broadcasts.

OK short: (highlighted TV broadcast is running): EPG will be closed and the broadcast is selected.

Detailed information on the selected broadcast will be called.

long: Change preview image to the station of the highlighted broadcast.

INFO: short: Call detailed information on the selected broadcast (see right hand column).

long: show Explanation of keys.

REC: Schedule the recording of the highlighted broadcast.

MENU: Go to side menu.

Mark selection of date, source, genre.

OK Accept changes.

If there is more information on the selected broadcast, it will be indicated here. You find further information on the indicated broadcast in the side menu:

Recording Schedule the recording of the selected broadcast for a time.

View Watch selected TV broadcast.

Previous event

Information on the previous broadcast

Next Event Information on the next broadcast

Timer list Call up timer list.


ט

20

Loewe bild 5

Operating manual

TV

Electronic Programme Guide / PIP

Memorising a broadcast via the EPG

A broadcast that has not started yet can be memorised.

For memorised broadcasts, the TV set will ask at the beginning of a programme if it should change the channel accordingly or switch on from the stand-by mode if this is activated in the menu System settings p

Control p

EPG p

TV on when memorised .

Picture in Picture (PIP)

The concurrent display of two different images is referred to as Picture in Picture.

Starting and ending PIP mode

PIP: Show/hide PIP display.

Mark the desired broadcast.

OK Call up detailed information.

Mark Memorise ,

OK Memorise broadcast.

In the EPG, a memorise symbol is placed behind the title of the broadcast .

Recording the programme via EPG

Select the programme to be recorded.

Picture change and station selection are restricted during recording.

The simultaneous display of two channels via analogue cable TV is not possible.

REC: Programming the recording.

If desired, adjust timer data (e.g. directory, start, end, recording type).

Select Record station ,

OK adopt.

In the EPG a recording symbol is placed behind the title of the broadcast.

Selecting the station of the PIP picture

If the frame colour of the PIP picture is not green, press the green key .

Select the station as usual. (see also chapter TV , section Select station ).

Select the station for the main picture

If the frame colour of the PIP picture is not white, press the green key .

Select the station as usual. (see also chapter TV , section Select station ).

Coloured key functions

If the frame colour of the PIP picture is not green, press the green key .

Yellow key: Swaps contents of TV picture and PIP picture.

Blue key: Start/stop PIP scan in the PIP picture.

Change PIP position


Move PIP to one of the screen corners.

PIP Settings

The size of the PIP display can be set in the System settings under

Control

ט more ...

ט

PIP .

21

Loewe bild 5

Operating manual

TV

Teletext

Teletext

Your TV set supports the two operating systems TOP text and FLOF.

Up to 2000 pages are stored in order to get quick access.

Additional page selection possibilities

First possibility:

INFO: Call overview page 100.

Second possibility:

Directly enter the page number.

Starting and ending Teletext

TEXT: Call teletext.

The function of the TEXT key can be set under

System settings

ט

Control

ט more ...

ט

HbbTV

ט

Function of the TEXT key . The factory default is

Standard teletext first .

Third possibility:

The page includes 3-digit page numbers.

Mark desired page number.

TEXT: Switching between Standard Teletext and

MediaText.

Pressing the BACK key ends Teletext.

Key functions for Standard Teletext operation

INFO press longer: Show Explanation of keys.

IINFO or BACK: Hide Explanation of keys.

OK Call page.

Fourth possibility:

The page consists of several sub-pages, indicated by the symbol and the arrows in the bottom line.

Go to bottom line.

Mark or ,

OK select previous / next sub-page.

The number of the current sub-page is shown between the arrows.

0-9: Directly enter the page number.

0:

9:

Stop self changing pages.

Zoom in the page (press several times).

Page selection with the coloured keys

Red key: One page back or back to previous page

(depending on Teletext provider).

Green key: Advance one page.

Yellow key: To next topic.

Blue key: To next range of topics.

The coloured bars (with TOP text) or the coloured writing (with FLOF text) in the last to bottom line show you which colour button you need to use to select which topic areas and topics.

Explanation of the symbols in the Teletext bottom line

Symbol

(icon)

Remote control key

–

Description

For Teletext pages with sub-pages:

Show previous sub-page.

–

–

For Teletext pages with sub-pages:

Show next sub-page.

Hide TV picture (Teletext as full screen).

Insert TV picture (Split screen Teletext/

TV Picture).

Activate Newsflash mode.

– Show hidden information on the Teletext page.

Page selection with P+/P–

P+

P– call next Teletext page.

call previous Teletext page.

– Hide information on the Teletext page again.

Add current Teletext page to the favourites in Home view.

Call function list with Teletext settings.

22

Loewe bild 5

Operating manual

TV

HbbTV / MediaText

HbbTV / MediaText

HbbTV (1 (Hybrid broadcast broadband television) offers the user comprehensive multimedia contents, e.g., media centres or additional information on the current programme as far as they are provided by the station (Value-added service).

MediaText helps you to use the next generation of teletext/videotext for HbbTV.

MediaText/HbbTV text can either be started directly or through an

HbbTV application.

Dependent on the selected TV station, buttons on your remote control can be locked via MediaText / HbbTV text.

The TV must be connected to the Internet to use HbbTV/MediaText.

A connection speed of at least 6,000 kbit/s (DSL 6000 or equivalent) is recommended for smooth playback of videos.

Opening HbbTV text directly

Depending on the programme provider, the direct

Call of MediaText may not be possible. MediaText must then be opened by means of the HbbTV application.

MediaText/HbbTV text is offered by the selected channel.

Connection to the Internet established.

TEXT: Call up “standard” Teletext (see chapter TV , section Teletext ).

By pressing the TEXT key a second time the Media-

Text/HbbTV Text will be called up.

The function of the TEXT key can be set.

Opening an HbbTV application

If an HbbTV application is available for the chosen channel after changing channels, this will be loaded during the automatic start process and a red key symbol will appear. When starting manually, the application will be loaded not until you press the red key. The start behaviour can be set under System settings ט Control ט more ... ט

HbbTV ט Function of the TEXT key .

HbbTV is offered by the selected channel.

Connection to the Internet established.

HbbTV mode is set to on .

Red key: Load / display HbbTV application.

Navigation within the HbbTV Text and how the coloured keys are assigned can vary depending on the provider.

Terminating the HbbTV Text

Pressing the BACK key ends HbbTV text.

HbbTV services for DVB radio

Various DVB radio stations also offer HbbTV text/media text. The functionality is the same as in TV mode.

The appearance, key assignment and available functions of the HbbTV applications are dependent on the provider.

Under certain circumstances, the recording and bookmarking functions of the applications may not be supported.

Loewe do not guarantee the accessibility, functionality or content of HbbTV applications.

Hide / Close HbbTV application

BACK: Hide / Close HbbTV application.

Depending on the set start behaviour, the HbbTV application will be hidden (automatically) or closed

(manually). In the start behaviour Automatic , you need to press the BACK key a second time for closure.

You will see a screen message after closing.

(1 Depending on the settings selected.

23

Loewe bild 5

Operating manual

Recordings

Digital Recorder

TV viewing with time shift

You can record programmes on the integrated hard disk (1 of your TV set with the digital recorder of your Loewe TV set.

The TV broadcast that you watch is automatically recorded in the background. You can stop the TV programme at any time and continue watching it later with a time shift. The maximum time shift is three hours.

During timeshift operation, the programme is not stored permanently.

If you would like to save programmes for a longer time, use the archive recording (see right column).

Recording of analogue stations is not possible.

Time-shifted operation is perhaps not possible or only to a limited extent for programmes of stations working with CI Plus encryption.

Interrupt watching (start time-shift television)

Press PAUSE key .

Archive recording

Programmes that you wish to watch at a later date can be recorded in the Digital Recorder Archive (DR+ archive) (1 .

A recording can be made manually (instant recording / direct recording) or as timer recording. The timer data can again be entered manually or more comfortably, for example, via EPG.

If EPG or teletext data is available, the Digital Recorder stores the title and additional information on each programme in the archive.

If additional languages are being transmitted for a DVB broadcast, these will also be recorded. DVB subtitles can also be recorded.

You can watch another programme or playback a recorded TV programme from the archive while recording a TV programme into the archive. But you can also play back the programme that you are just recording with time-shift.

With multi recording two programmes can be recorded simultaneously

(see next page).

During the archive recording, the bar showing the recording progress is red.


Recordings of CI Plus encrypted programmes (e.g. RTL HD, Sat 1 HD,

Pro 7 HD, etc.) are perhaps not possible or only to a limited extent.

In order to use the full DR+ functionality, two antenna cables must be connected when using DVB-S.

The TV image becomes a freeze frame and the DR+ status display appears.

At the top you will see the number and name of the station, start, end and the title of the current programme.

In the lower part of the screen at the beginning of the time bar you find the starting time of the background recording. On the right hand side of the bar you can see the time at which the time shift recorder will be full

(automatically extends by 30 minutes, up to a max. 3 hours). The time above the bar at the PAUSE key shows the current time.

Instant recording (One touch recording) / Direct recording

With One Touch Recording, the recording starts immediately at the press of a button. For direct recording, the recording will start only after entering the recording duration.

If the broadcast was watched right from its start, it will be saved from the the beginning in the DR+ archive. Otherwise, recording begins at the point from which viewing of the broadcast began.

One Touch Recording

Press REC key longer: The current programme is recorded immediately.

Direct recording:

Press REC key briefly.

If desired, adjust timer data (e.g. directory, start, end, recording type).

Continue (time-shift viewing)

Press PLAY key .

You can now continue watching the TV programme at the time when you had pressed the PAUSE key.

The Playback symbol appears instead of the Pause symbol .

For further options of time shift watching see chapter

Video , section Video playback .

OK

Select

adopt.

Record station ,

Watching other stations during archive recording

After you have started the recording, you can switch to another station.

The second channel can be watched in time-shift TV whilst a recording is taking place (Time shift during archive recording).

Returning to live picture (end time-shift television)

Press STOP key .

You see the station’s live picture again.

Switching to a different station

If you switch to another channel, the time-delayed recording (time shift) is restarted. The hitherto existing time-delayed recording is deleted (time-shift buffer is emptied).

When switching between encrypted and unencrypted contents of the same station the timeshift buffer is also cleared. When doing this, the timeshift television is interrupted and you see the live picture of the broadcast. As a precaution, start archive recording of interesting broadcasts when watching stations with changing coding.

Viewing another programme from the archive during archive recording

After you have started the recording, you can also watch a programme you have already recorded.

Call DR+ archive .

Mark the recorded broadcast,

OK watch programme.

The recording process is continued in the background.



ט

24

Loewe bild 5

Operating manual

Recordings

Digital Recorder

Time shift viewing during archive recording

PAUSE key: Switch to freeze picture.

The recording is continued in the background.

Display during time-shift viewing and archive recording:

PLAY key: Continue

You will now see the time-shift archive recording.

For further options of time shift watching see chapter

Video , section Video playback .

STOP key: End time shift and return to the live picture of the current archive recording.

Multi recording

The Multi Recording function (1 makes it possible to record two programmes at the same time and still watch a third one as well.

Generally speaking: each recording, each selected station requires one transponder stream. With dual channel devices, two separate streams are available.

An ideal scenario is to record from two stations sharing one transponder, so that any third programme can be watched.

While simultaneously recording from two programmes that are on two different transponders, only those stations are selectable for the third programme, which are transmitted by one of the two transponders.

All stations that are on other transponders appear in the channel list in dark grey and cannot be selected.

In order to use the full functionality of multi recording, two antenna cables must be connected when using DVB-S.


Recordings of CI Plus encrypted programmes (e.g. RTL HD, Sat 1

HD, Pro 7 HD, etc.) are perhaps not possible or only to a limited extent.

The examples shown in the following table for station combinations are valid only for DVB-S. For DVB-T or DVB-C, other combinations may apply.

The station / recording combination that can be used, depends on the respective station group / transponder group. You get the assignment from your network provider or the respective broadcasting stations.

Switching off the TV set during recording

You can switch off the TV to standby whilst recording. The recording is continued in the standby mode.

Never switch the TV set off at the mains and do not pull the plug of the TV set out of the socket. Otherwise the recording will be lost!

Stop recording early

You can end a current archive recording prematurely.

Press STOP key

A message appears in the right upper corner of the screen.

.

Examples of DVB-S recording combinations:

Broadcasting station combinations:

Recording Sat 1

Recording Pro 7

Watching any of the stations

Recording Sat 1

Recording RTL

Watching any of the stations

Recording ARD HD

Recording ZDF HD

Watching arte HD

Recording RTL

Recording RTL II

Watching ARD HD

Recording RTL

Watching ARD HD

Watching ZDF HD

Possible: Info

Yes

No

Yes

Yes

No

Transponder 1: Sat 1, Pro 7

Transponder 2: vacant for selecting any station

Transponder 1: Sat 1

Transponder 2: RTL

You can not choose any station, only one station on one of the transponders used e.g. Vox,

Pro7, RTL2.

Transponder 1: ARD, arte HD

Transponder 2: ZDF HD

Transponder 1: RTL, RTL2

Transponder 2: ARD HD

Transponder 1: RTL

Transponder 2: ARD HD

ZDF HD is on a different transponder, and therefore can not be displayed.

OK Stop recording.

The recording process is ended. The portion of the TV broadcast recorded up to this point is saved on the hard disk and can be played back via the DR+ archive.

If two archive recordings are active (multi recording), the recording stops that started first.

You can also end a running recording by deleting the corresponding Timer entry in the Timer overview

(see chapter Miscellaneous , section Timer ).

(1 Function for device type bild 5.32 (version 56426x85) not available.

25

Loewe bild 5

Operating manual

Recordings

Digital Recorder

DR+ archive

With the DR+ archive you have access to all the recorded programmes and and you can start their playback. In the DR+ archive you can create your own directories and sort your records accordingly.

Open the DR+ archive

Open the DR+ archive .

Select the desired DR+ archive if several available,

OK Display archive entries.

Multi select Marking of multiple archive entries (see below).

Delete Delete archive entry from hard disk and recover disk space.

Export Copy/move archive entries to an externally connected USB storage device or to the hard disk of compatible Loewe TV sets in the home network.

If no target medium is available, the menu item is shown in dark grey.

Move Here, you can move recordings in the DR+ archive to a directory and create new directories (see below).

Favourite Add archive entry to Home favourites.

See chapter Home view for further information.

Delete protection

Activate or deactivate protection against automatic deletion by the Delete Manager.

Parental lock

Protect recorded broadcast by a four digit PIN against unauthorised playback.

This menu item appears only when a PIN has already been defined ( System settings ט Control

ט Parental lock ).

Repeat Playing archive entry repeatedly (in a loop) during future playbacks.

PIP: switch in DR+ archive view between standard and compact view. Directories in the default view are displayed by superimposed preview images and in the compact view, by an arrow -> in front of the directory name.

Playing from the DR+ archive

Select the required archive entry (programme or directory).

If directory selected:

Open directory,

Select the desired broadcast in the directory,

OK programme.

See chapter Video , section Video playback for further information.

During playback:

P+ call next programme.

P– call previous programme.

Directories are skipped in this case.

DR+ archive function list

An archive entry has been selected.

The menu items available in the function list depend on the selected entry from archive (programme or directory).


Select desired function,


Multiple selection

Multiple selection allows to mark several archive entries and then perform a desired action via the function list (e.g. export, delete).

The DR+ archive is opened, multiple selection was called in the DR+ archive function list.

Select the archive entry,

OK Confirm selection (archive entry becomes blue).

Repeat as often as desired.


Select desired function (e.g. delete),

OK confirm selection.

The marked archive entries will be deleted.

Directories in DR+ Archive

In the DR+ archive, you can create new directories when using the function move .

Into these directories you can move existing archive entries or do a new recording directly there.

For this purpose you simply choose the desired directory in the recording control (timer data).

You can determine the name of the new directory yourself. The DR+ archive root directory has the fixed designation main directory .

It is not possible to nest several directories into one another.

Detailed info

Sorting

Show detailed information on the marked archive entry.

Sort archive entries according to certain criteria (e.g. ascending A-Z or descending Z-A) or according to recording date (newest entries first).

Deleting recordings from the archive

The desired entry in the DR+ archive is marked.

STOP key: Call delete dialogue.

OK Confirm deletion. The DR+ archive will be displayed again.

Rename Changing title of the record or of directory.

26

Loewe bild 5

Operating manual

TV

Digital Recorder

DR+ Streaming

Using the DR+ streaming function, you can view films via your home network from the DR archives of other Loewe TVs that have been set up for this function, as long as these units make their DR archives accessible.

Also, you can make the DR archive of your TV set (1 available to any other TV sets and UPnP clients equipped with this feature. They will then be able to access the archive via your home network.

To use DR+ streaming, at least two Loewe TV sets are required, of these, at least one TV set with integrated hard disk (with Chassis

SL1xx, SL2xx, SL3xx, SL4xx as DR+ Streaming Server).

The TV sets also need to be connected via a network (wireless connection via Wi-Fi or cable connection via Ethernet, PowerLine).

Archive entries can only be provided or released in the network by

TV sets with integrated hard disks (DR+)

In case of these TV sets which are used as DR+ Streaming Servers, the DR+ archive must be made available for other TV sets:

System settings

ט

Control

ט

more ...

ט

DR+

ט

DR+ Streaming

ט

Share DR+ archive with other devices

ט

yes .

Archive entries released in the network can be replayed by all TV sets with chassis SL1xx, SL2xx, SL3xx, SL4xx and Chassis MB180.

In case of these TV sets used as DR+ Streaming Clients, access to other DR+ archives must be enabled:

System Settings ט Control ט more ... ט DR+ ט DR+ Streaming

ט Also use other archives ט yes .

Functions requiring write access to a device that enables the recording to be viewed are not available when viewing a DR+ archive entry over the network.

Such functions are, for example, child protection, delete protection, renaming, deleting entry or bookmark, setting bookmark, deleting or hiding parts of the recording.

Follow-Me function

The Follow me function enables you to interrupt a current programme in a TV set (main device) with integrated hard disk and to continue viewing it with a TV (secondary device) set from the point of interruption.

To use Follow-Me function, at least two Loewe TV sets are required, of these, at least one TV set with integrated hard disk (with Chassis

SL1xx, SL2xx, SL3xx, SL4xx).

The TV sets also need to be connected via a network (wireless connection via WLAN or cable connection via Ethernet, PowerLine).

On the main TV set, the function must be enabled

System settings ט Control ט more ... ט DR+ ט DR+ Streaming

ט Share DR+ archive with other devices ט yes .

On the target TV set (secondary device), the function must be enabled:

(1 :

System Settings ט Control ט more ... ט DR+ ט DR+ Streaming

ט Also use other archives ט yes .

Start Follow-Me function on main device

Press PAUSE key .

The TV image becomes a freeze frame and the DR status display appears.

Playback of DR+ archive entry via the network

Activate Follow-Me .

Open the DR+ archive.

Select desired archive of the corresponding device,

OK Display archive entries.

You will see a message on the screen.

The archive recording starts in approximately 20 seconds without an entry. The TV set switches itself off after starting the recording. The broadcast is adopted into the DR archive.

The recording TV set will make the broadcast available to the network from now.

You can indicate the beginning of a Follow-Me recording at the target TV sets in your network by a screen display.

Select the required archive entry,

OK Play archive entry.

chapter , section Video playback for further information.

Continue viewing the programme at the second device

Call on the TV set, where you want to view the broadcast, the DR+ archive of the recording TV set.

Open the DR+ archive .

Select archive of the recording TV set (main device),

Display archive entries.

Select Follow-Me recording,

OK View recording.

(1 For device type with integrated hard disk.

27

Loewe bild 5

Operating manual

TV

Digital Recorder

Mobile Recording

Mobile recording enables you to program recordings on your TV from far away.

Basically, the function is based on a simple e-mail correspondence. If the mobile recording function is activated and set, the TV set scans an e-mail account at regular intervals.

If a record command is sent by the Loewe Assist Smart App , this command reaches a connecting server.

From here, a short text email is sent to the appropriate email account.

The TV set can receive this information and program / start a recording accordingly.

You can download the Loewe Assist Smart App for free for iOS and Android in the appropriate app store.

The TV set must not be switched off using the power switch, otherwise the email mailbox can not be scanned.

The TV set must be connected to the Internet.

The programmed timer recordings of the Mobile Recording function are handled by the TV set with highest priority.

If at this time other recordings are programmed for the same recording period, they will be overwritten by the new recording or parts of the recording cut off.

Start/end of the scanning period

Here, the start and end times are displayed depending on the scanning period.

If you wish to enter start / end of the scanning period individually, you must select user defined for scanning period.

In the last step it is checked whether the email account is accessible with the set data.

On successful test the configuration is completed.

Settings of personal email account

If the mailbox defined by the system was selected as the default email account, the account is automatically created on the server. You do not need to make further settings.

When selecting Configure email account ט Manual you need to adjust the factory defaults and enter the settings of your existing personal email account.

You will find the necessary parameters in the menu dialogues Settings/

Options of your email programme you are using (e.g. Outlook,

Thunderbird) or from the relevant provider of your email accounts.

Open settings for Mobile Recording

HOME: Call Home view.

Select System settings ,

OK call System settings.

Select Multimedia / Network

go to next column.

,

Select Mobile Recording ,

OK call.

The Mobile Recording wizard is started.

Select yes for Function enabled .

Select Configure email account ט Automatic / Manual .

When selecting Configure email account ט Manual , enter your own settings for personal mailbox account

(see right column).

When selecting Configure email account ט Automatic , the system mailbox will be used. In the next step, the TV set displays the email address and the security

PIN of the system mailbox.

Continue until the setting of scanning times.

Carry out settings.

Settings of scanning times

When the TV set is in standby mode, you can determine the times at which the TV automatically checks the defined mailbox for remote programming.

If the TV set is switched on or in the Quick Start mode, a fixed inspection interval of 10 minutes applies permanently.

Scanning period

Inspection interval

Here you can specify the period during which the TV set checks the email account.

Here you can specify the time interval at which the

TV set checks the email account in the specified period.

Default settings page 1:

Email address:

Account type:

Incoming mail server:

Outgoing mail server (SMTP):

Username:

Password:

Secure PIN:

Default settings page 2:

Incoming mail server port:

Incoming encryption:

Server equires authentification:

Outgoing mail server port:

Outgoing encryption:

Delete mail from server:

Email account settings [email protected]

POP3 or (IMAP) mail.loewe-dialogue.com

mail.loewe-dialogue.com

[email protected]

************** xxxx

995 (POP3),0 993 (IMAP)

‘no‘ , ‘SSL’ , ‘StartTSL’

‘no‘

‘25’ (no), ‘587’ (StartTSL), ‘465’ (SSL)

‘no‘ , ‘SSL’ , ‘StartTSL’

‘no‘

Reset

Remote programming via any email client

In case of a manual e-mail account, you can perform the remote programming of recordings by means of any e-mail client.

The subject line of the email must include the defined four-digit secure pin, the broadcasting time and the station:

PIN BROADCASTING TIME OF STATION

Example: 1234 20:45 Das Erste HD

1234 8.45 pm Das Erste HD

Timer programming of a broadcast, which runs on the current day around 20:45 on the tv station Das Erste HD . An exact specification of start and end time of the programme is not required.

The station name must not be 100% accurate, the name is compared by means of a certain algorithm. It is advisable, however, to store the station name as a note in the smartphone.

If the recording time is more than 24 hours in the future, the date must also be specified in the subject line:

1234 04/09/2014 20:45 Das Erste HD

1234 09/04/2014 8.45 pm Das Erste HD

You will get an e-mail response as confirmation from the TV set to the address of the manual e-mail account with the current list of programmed timer recordings.

28

Loewe bild 5

Operating manual

Video

Video

The item Sources/Apps gives you access to videos from local (USB, home network) and online sources.

High definition movie material (HD movies) from format 720p upwards (resolution 1280 x 720 or higher) should be played back via a wired connection. If there is a wireless connection, then technical limitations (e.g., fault liability, bandwidth limitations) can cause disruptions in the playback right up to a complete breakdown of the playback.

Video function list

The video function list contains the individual functions for your videos.

A video source has been selected.

The menu items available in the function list depend on the currently marked object (data source, directory, file).


Calling video selection


Select Sources .



OK call.

Select favourite (if any) or source,

Sorting Sort media files in the opened directory in alphabetical

(ascending A-Z or descending Z-A) order, file size or date (newest entries first).

Favourite Add marked media file to the Favourites in Home view .

Possible video sources

The media sources shown here depend on the devices available/ used.

Select video

DR+ archive Accessible via Home: Recordings.

Programmes that you record on the internal hard disk (1 or an external USB hard disk (2 using the Digital

Recorder are compiled in the DR+ archive .

Via the DR+ archive you can replay, edit or delete your recorded programmes.

For further information see chapter TV , section

Digital Recorder – DR+ archive .

App Gallery Call App Gallery .

For further information see chapter Apps , section

App Gallery .

A video source has been selected.

The directory structure and the form of presentation of the title selection is dependent on the selected source.

Select desired directory,

OK open directory.

Repeat procedure if necessary.

USB Accessible via Home: Sources.

USB storage media on the USB connections of your

TV set.

The exact designation depends on the relevant storage medium.

Please also observe the notes regarding USB sticks in chapter Miscellaneous , section Software update !

WMP11 Accessible via Home: Sources.

Examples for media servers in your home network.

The exact designation depends on the media server used.

OK

Select desired video,

Start or continue playback of the selected video.

chapter , section further information.

Video playback for

(1 For device type with integrated hard disk.

(2 For device type without integrated hard disk.

29

Loewe bild 5

Operating manual

Video

Video playback

The description of the following functions applies to the playback of videos from the DR+ archive as well as for videos from USB storage media or from media servers in the home network.

For playback of DR+ archive entries you have additional playback and editing capabilities (see also next page).

Description of the symbols in the status display for video playback

The number of available symbols in the status display depends on the selected video and the video source (DR+ archive, USB, home network).

Symbol

(icon)


Description

Call list view (select video).

Symbol

(icon)


–

hh:mm

Description

Video status display

The video status display provides you with further options for the current playback.

–

INFO: Show status display.

BACK: Hide the status display again.

long

long

Set bookmark manually (see next page).

Only for playback from DR+ archive.

Delete bookmark manually (see next page).


The function is only available when a manually set bookmark is within five seconds around the current playback position.

Skip to next bookmark (see next page).


Skip to previous bookmark (see next page).


Call dialogue for deleting bookmarks.


–

–

–

–

–

–

–

Start DR+ Follow-Me recording.

The Follow-Me function enables you to interrupt a current programme and to continue viewing at an alternative TV set from the point of interruption.

Only in time-shift mode.

Call interval functions (see next page).


Only selectable in pause mode.

Adopt current freeze picture as cover for the DR+ archive.


Only selectable in pause mode.

Activate / deactivate again the repetition of the currently played archive entry.


Switch repetition (loop playback) of all titles of the current directory ON/OFF.

For playback of videos from USB storage media or from the home network.

Switch ON/OFF repetition (loop playback) of the current title.

For playback of videos from USB storage media or from the home network.

Change picture format of the video playback.

Skip to desired position in the playback.

Add currently played video to the favourites in Home view.

Call detailed info on the current playback.

INFO key : display of detailed info when status display appears, otherwise call of status display.

Call function list with video settings.

Explanation of keys

INFO (press longer): show Explanation of keys.



ט

30

Loewe bild 5

Operating manual

Video

Pause playback (freeze picture)

PAUSE key: Switch to freeze picture.

PLAY key: Continue

Additional functions for DR+ archive playback

There are additional editing and playback functions for playback of recorded programmes from the DR+ archive.

Jump

By briefly pressing the or keys you can skip forwards and backwards in the movie.

Skip forwards.

Skip backwards.

Setting bookmarks

To retrieve interesting scenes in a movie later, you can manually set the bookmarks. In addition, there are also automatically set bookmarks for the start/end of a programme.

In programmes sent in Dolby Digital 5.1 format, the commercials are detected and automatically bookmarked at the beginning and end of the advertising block.

In case of a running time-shift recording (time-shift television), this will be converted into an archive recording when a bookmark is set.

Skipping with Smart Jump

The Smart Jump function ensures that the jump width is halved each time the jump direction is changed or doubled after three jumps in the same direction (max. 8 minutes). This way you can quickly find a certain spot of the recording.

You are looking for a particular scene in a running programme:

PLAY key (press longer): Set bookmark.

You will see a message on the screen. The status bar is then faded in and you will see the set bookmark above the bar for the playback.

Automatically set bookmarks are white. Manually set bookmarks are blue.

Depending on your needs, press the key (backwards) or (forwards) briefly several times, to roughly jump to the area of the programme you are looking for.

If you skipped the desired scene of the programme, jump in the opposite direction. This jump is executed in halfs of the jump distance.

If you skipped the desired scene of the programme again, jump again in the opposite direction. In the process, the jump distance is cut in half again.

By halving the jump distance again when changing direction you can gradually approach the desired location.

0:00 0:38 0:45

Jumping to Bookmarks

INFO:

OK hh:mm

Show status display.

Select next or previous

Skip to next or previous bookmark.

Or:

Blue key: Skip to next bookmark.

bookmark,

Winding

To search for desired scenes in movies you can fast forward and rewind at three different speeds. Sound is not audible during winding.

In case of time-shift viewing, playback is automatically activated when the end of the recording is reached.

In case of Fast forward of archive entries, playback will finish at the end of the recording. The DR+ archive is displayed again.

Press or a little bit longer.

Yellow key: Skip to previous bookmark.

Delete manually set bookmark

Jump to the manually set bookmark to be deleted.

Select Delete bookmark ,

OK Delete bookmark.

Or: With each brief pressing of or the speed will increase until you switch back to the first speed.

The different winding speeds are represented by the symbols shown below.

Play key (press longer): Delete bookmark.

PLAY key: playback.

In the case of Internet videos, please wait until these are buffered in the memory. This can take a few seconds, depending on the bit rate of the film and

Internet speed.

Interval functions

The intervals between manually or automatically set bookmarks

(intervals) can be faded out for future playbacks. In addition to that, unwanted intervals at the beginning or end of your recorded broadcast can be deleted.

An archive entry is replayed.

INFO: Show status bar.

Move to the desired interval in the recorded broadcast by skipping or winding.

PAUSE: Stop play.

Select Interval functions

OK Call interval functions.

,

31

Loewe bild 5

Operating manual

Audio/Radio

Audio/Radio

With item Audio/Radio you find music files from your USB storage media and media servers in the home network and you access DVB and Internet radio.

Calling Audio selection

Audio/Radio function list

The audio/radio function list contains the individual functions for your music titles.

An audio source has been selected.


HOME: Call the Home view.


Select Apps.

OK call.

Select favourite (if any) or source, OK


Confirm selection.

Possible Audio/Radio sources




Favourite Add marked media file to the Favourites in Home view .

DVB radio The TV set can receive digital radio stations via DVB.

For further information see chapter Audio/Radio , section Radio mode (DVB radio) .

Internet radio The TV set can receive digital radio stations via the

Internet.

For further information on Internet radio see chapter

Audio/Radio , section Radio mode (Internet radio) .

Select music title

An audio source has been selected.

The directory structure and the form of presentation of the title selection is dependent on the selected source.



App Gallery .

OK


open directory.


USB Accessible via Home: Sources.

USB storage media which are connected to the USB of your TV set.



Select desired music title,

OK Start or continue playback of the selected music title.

chapter , section Audio playback for further information.

32

Loewe bild 5

Operating manual

Audio/Radio

Audio playback

Description of the symbols in the status display for audio playback

Pause playback

PAUSE key: Pause current playback.

PLAY key: Continue playback.

Symbol

(icon)


–

–

–

Winding

You can fast forward music titles at four different speeds. Sound is not audible during winding.

Press a little bit longer.

With each brief pressing of the speed will increase until you switch back to the first speed.

Available speeds: 2x, 4x, 8x, 16x.

PLAY key: playback.

Description

Call Folder view (select music title / station).

Switch repetition (loop playback) of all titles of the current directory ON/OFF.

( Repeat all )

Only for playback of music titles via

USB / Home network.

Switch ON/OFF repetition (loop p l ay b a c k) of t h e c u r re n t t i t l e.

( Repeat title )


USB / Home network.

Switch Shuffle playback for the titles of the current directory ON/OFF.


USB / Home network.

Switch off the TV screen.

Select another title / play current title from start

BACK: Call music selection.

Select music title as described in chapter Audio/

Radio , section Audio/Radio – Select music title .

Or:

Press P+ or briefly:

Play next title of current album / directory.

Press P– or briefly:

Play current title from start.

Press P– or briefly again:

Play previous title of the current album / directory.

Or:

Go to line with music titles,

scroll in music titles.

Add the current station / music title to the favourites in Home view.

Show EPG detailed info on the current broadcast.

Only for DVB radio.

Call detailed info on the played music titles.


USB / Home network.

Call function list with audio settings.

OK start playback of the marked title.

Ending playback

STOP key: End playback and return to music selection.




33

Loewe bild 5

Operating manual

Audio/Radio

Radio mode (DVB radio)

The TV set can receive digital radio stations via DVB.

The AUDIO key has been preset to radio mode in the factory.




Switching Radio mode on

AUDIO key on the remote control.

The last used radio mode (DVB or Internet) is called.

DVB radio function list


Or:

HOME:

OK call.

Calling the

Select

Home

Apps.

view.

Select DVB radio,

Or:


call function list.

Select function,

OK call.

See chapter TV , section Function list for further information.

For the first use of DVB-Radio the first station in the radio station list is called, otherwise the station last used.

HbbTV services for DVB radio

Various DVB radio stations also offer HbbTV text/media text. The functionality is the same as in TV mode. (see chapter TV , section

HbbTV / MediaText ).

2 ANTENNE BAYERN

Certain radio stations show instead of the above symbol, a station logo.

Switching the screen on/off

Green key: Switch screen OFF.

Switching off the screen reduces the power consumption of the TV set.

Switch on the screen with the remote control:

Press green key .

Station switching

The radio mode is switched on and a radio station has been selected (see above).

Exit radio mode

Press AUDIO key or

TV key : TV mode is called.

P+/P– Station up/down.

The number and the station name are displayed briefly. Also, the status display with time/date and programme-dependent symbols appears.

Or:

Enter the station directly using the numerical keys .

Or:


OK call.

Select another operating mode,

Or:

OK call station list.

34

Select station,

OK call.

Loewe bild 5

Operating manual

Audio/Radio

Radio mode (Internet radio)

The TV set can receive digital radio stations via the Internet.

The names of the directories and stations in the Internet radio mode are given by the provider vTuner. Changing the order of stations or renaming them is not possible here.

Internet radio is only accessible if a connection to the Internet has been established.

Switching Radio mode on

AUDIO key on the remote control.

The last used radio mode (DVB or Internet) is called.

Or:


Artist Search (Search for artists)

By means of the search for artists, you can quickly and easily see all radio stations that just play music by this artist. The result list is sorted for now and most played .

Internet radio station list is opened.

Select search for artists,

OK on-screen keyboard is opened.

Enter name of the band or singer using the keyboard (see also chapter General information on the operation , section

Entering characters with on-screen keyboard ),

OK adopt, search is started.

Select Apps.

OK call.

Select Internet radio ,

You see the radio station list.

Select station,

OK call.

Station search

You can search an Internet radio station directly by name using the menu item Station search. The procedure is similar to the Artist Search described above.

Mark desired directory,

OK open directory. Repeat procedure if necessary.

Select station,

OK call.

For further information on the control of the Internet radio see chapter Audio/Radio , section Audio playback .

Switching the screen on/off

Green key: Switch screen OFF.

Or:

Station switching

BACK: call station list.

Select stations as described above. Or:

P+/P– Scroll through the current Internet radio directory to look for stations. Or:

Keys 2-9: Input the first letter. The station list will jump to the first station of the corresponding letter.

Select Screen off ,

OK Switch screen off.

Switching off the screen reduces the power consumption of the TV set.

Switch on the screen with the remote control:

Press green key .




Internet radio function list


Select function,

OK call.

See chapter TV , section Function list for further information.

Exit radio mode

TV key : TV mode is called.

Or:


OK call.

Select another operating mode,

35

Loewe bild 5

Operating manual

Photo

Photo

Via menu item Photo you can view photos from your local media and from online sources on your TV screen.

Calling Photo selection


Select Sources .

Photo function list

The photo function list contains the individual functions for your photos.

A photo source has been selected.

The directory structure and the form of presentation of the photo selection is dependent on the selected source (example of a menu image: source server home network).



OK call.

Select Photo source,

Possible photo sources




App Gallery .

USB USB storage media on the USB connections of your

TV set.



Slide show

Favourite

OK

Select function,

call.

Start slide show of the photos in the currently selected directory (see next page for further information).



Add marked media file to the Favourites in Home view .

Photo Here you can do frequently used picture settings

(Slide show speed, Crossover, Automatic rotate).

Select photo

A photo source has been selected.

The directory structure and the form of presentation of the photo selection is dependent on the selected source (example of a menu image: USB source).


OK open directory.


Select desired photo,

OK View photo zoomed to full screen.

See next page for further information – Photo display .

36

Loewe bild 5

Operating manual

Photo

Photo display

Description of the symbols in the status display for photos

USB1 -> CRW_7266b

Back

Full-screen mode

A photo is highlighted in the selection ( Folder view ).

OK View photo in full-screen mode.

USB1 -> CRW_7266b

Back

Show previous / next photo.

Symbol

(icon)


–

–

–

short

short

Description

Call Folder view (select photo).

Rotate photo by 90 degrees to the left.

( Rotate left )

Rotate photo by 90 degrees to the right.

( Rotate right )

Start slide show .

Rotating the photo

Fade in photo status.

Mark or .

OK Rotate photo by 90 degrees to the left/right.

USB1 -> CRW_7266b

Back

Pause slide show .

Show previous photo.

Show next photo.

Add currently displayed photo to the favourites in Home view.

Call detailed info on the displayed photo.

Slide show

PLAY key:

USB1 -> CRW_7268

Call function list with photo settings.

Start slide show.

Back




PAUSE key: Pause slide show.

PLAY key: Continue paused slide show.

Photo in full-screen mode / exit slide show

STOP key: Full-screen mode / end slide show and return to photo selection.

37

Loewe bild 5

Operating manual

Web

Apps

Here you have access to multimedia content in the Internet (App Gallery) as well as a high-quality web browser.

App Gallery

Call App Gallery

To use the full functionality of App Gallery, the TV set must be connected to the Internet.

Calling the Web selection



Select Apps .

Select Apps .

OK call.

Select App Gallery ,

App Galerie - Home

OK call.

Select favourite (if any) or source,

Possible Web sources

App Gallery Under the menu item App Gallery you will find a continually expanding platform for interactive TV applications from the Internet (see next column).

All applications are optimised for use on the TV.

Browser Call Web browser of the TV set.

For further information see chapter Web , section

Browser .

The upper portion of the App Gallery home screen contains new online content.

The lower portion of the App Gallery home screen contains Recommendations given by Loewe.

The given content may change from time to time without prior notice.

Select Home ,

OK go to the right to choose the online content.

Mark the desired online content,

OK Display/play content.

The navigation within the various applications depends on the provider.

Functions in the App Gallery home screen

Home Displays the App Gallery home screen with a choice of new online content and recommendations.

Browse Under Browse you can list and call the online content by subjects.

Settings In the Settings for App Gallery you can select countries, for example, to take advantage of various services.

Imprint Providing the legally required information on the parties responsible for the content.

Exit App Gallery

HOME: Call Home view and select another function.

38

Loewe bild 5

Operating manual

Web

Browser

You can access Internet sites directly using the integrated Opera browser. The web browser can also be used without an Internet connection. Thus you can access local devices which provide a web interface (e.g., router, home control, home network server).

Entering a URL (Internet address)

Browser status is displayed.

Mark the URL (Internet address) of the indicated Internet site,

OK Open address entry box.

Calling the Web browser


Select Apps ,

OK call.

Select Browser ,

Start page will be opened.

INFO: display browser status.

Explanation of the symbols in the browser status

Update the displayed Internet site. ( Reload site )

Select as start page .

100% Change zoom factor of the displayed site / browser.

Add displayed Web site as favourite to Home screen .

Select required character,

OK Accept character.

In the event of letters with a triangular, additional letters are displayed when pressing the OK button longer (2 sec).

Å Delete character to the left of the cursor.

.-/ The selection switches to special characters.

abc Switch between upper/lower case.

Space Enter blank space.

Delete Delete all characters.

Cancel Cancel input. The entry box will be closed and the previous Internet site will be displayed again.

Accept Accept address and open new Internet site.

The characters may also be entered by the USB keyboard or the numerical keys of the remote control

(see left column).

Navigation on Web sites

P+/P– Scroll page vertically.

/ Scroll page horizontally.

Select link or text entry field with white mouse cursor faded in,

OK open link or confirm text input.

For the entry of text, press a numerical key (0-9) repeatedly as with a mobile phone until the desired character appears. The available letters are printed on the individual numerical keys.

Yellow key: Delete character.

BACK: Stop text entry and exit entry box.

Exit Browser

Web site is displayed. Browser status is hidden

HOME: Call Home view and select another function.

39

Loewe bild 5

Operating manual

System settings

System settings

Under the menu item System settings in the Home menu you find all settings and adaptabilities of your TV set.

Detailed information on the individual setting options you will find in the user manual, which can be downloaded from the Loewe Internet site (see chapter Miscellaneous , section Documentation ).

Calling System settings


OK call.


Or:

Press MENU key longer: call System settings.

Explanations of the setting options:

Picture Here you do the settings referring to the representation of the picture signal on your TV set.

Menu items Picture:

Picture adjustment, Contrast, Brightness, Color intensity, Image+ Active, Picture format, Automatic aspect ratio.

Menu items Picture

ט more ...:

Colour temperature, Sharpness, Move picture up/ down, Auto dimming, Auto format (AMD), Film quality improvement (DMM), Digital Noise Control

(DNC), Skin tone, Gamma brightness correction,

Deblocking filter.

Sound Under this menu item you find the settings for sound playback.

Menu items Sound:

3D (1 , Sound mode (1 , Sound adjustment, Loudness,

Sound picture synchronisation, Volume adjustment.

Menu items Sound

ט more ...:

Auto volume, AV output signal, Maximum volume,

Maximum switch on volume, Balance.

The available menu items may vary and depend on the connected audio component.

Stations Move and delete TV and radio stations. In addition to that you can automatically and manually update the complete station list. Your stations can also be arranged and optionally sorted in personal lists.

Menu items Stations:

Automatic scan TV+Radio, Manuell scan (incl. antenna status), Station lists TV, Station lists Radio,

Update station list automatically, Transfer all station lists.

Control In this menu you find settings for additional functions of your TV set like EPG, picture in picture (PIP), digital recorder (DR+) as well as interfunctional settings like time and date, parental lock or software update.

Menu items Control:

Language, Parental lock, EPG, Energy efficiency,

Quick start mode, Software.

Menu items Control ט more ...:

On-screen displays, Time and date, DVB settings,

PIP, DR+, Standard Teletext, HbbTV, Hard disks,

Export log file, Asterisk key function.

Multimedia /

Network

By means of the Multimedia / Network menu you configure your network adaptor and network access.

By means of the menu item renderer you can allow external devices to access your TV set (renderer) via app to render (play back) contents there.

Menu items Multimedia / Network:

Network settings, Multimedia settings, Renderer,

Mobile Recording (1 , TIDAL login.

Connections Use this menu to configure the TV set for operation with external devices.

The sound component wizard leads you comfortably through the configuration of your used audio equipment such as speaker systems or HiFi/AV amplifiers.

For more information, refer to the instruction manuals of the equipment used.

Menu items Connections:

Sound components, Antenna DVB, AV connecting settings, Digital Link, HDMI, Gaming mode.

Extras Under this menu item you can display the features of your TV set, repeat the initial startup or reset the device to the factory settings.

Also, DR+ streaming can be enabled, by means of which the TV set provides the contents of the DR+ archive on the network.

Menu items Extras:

DR+ Streaming, Integrated features, Repeat initial installation, Reset to factory settings.

(1 Function available for selected models.

40

Loewe bild 5

Operating manual

Functions

Timer

In the timer menu you will find the Timer List and the Timer Services.

All programmed recordings, earmarked programmes and copy jobs are listed in the timer list.

The timer services menu offers you convenient alarm services.

Calling the timer menu


Delete / change programmed timer instruction

Use this function in the timer list if you want to delete recordings already programmed, end a running timer recording or change a timer instruction.

The timer menu is displayed.

Mark desired timer instruction.

The text of a currently active timer instruction is red.

If you delete this timer instruction, the recording is stopped.

Select Recordings ,

OK call.

select Timer (at sources),

Or: press longer: call the timer menu.

Select Timer list or Timer Services (see right column).

OK Change marked timer instruction.

The timer data is displayed.

Or:

STOP: Delete marked timer instruction.

OK Confirm delete.

Timer Instruction is deleted.

Add new You can also programme new recordings, earmark other programmes and copy pre-recorded programmes from the DR+ archive to an external

USB hard disk by means of the timer list.

When you have programmed timer recordings, the TV set can only be switched off to the standby mode. Never switch the TV set off at the mains and do not pull out the plug of the TV set out of the socket. Otherwise no timer recordings can be made.

When a software update occurs it may happen that timer entries and memorised programmes are deleted. After such a software update, check your timer list.

Timer Services

Programmed alarms are also active when the TV set has been switched off to standby.

If the TV set is switched on from the standby mode by alarm, a screen message appears. If this is not confirmed within 5 minutes with the

OK key , the TV set switches automatically off again for safety reasons.

The TV set can also be switched off automatically at certain times.

A screen warning appears one minute before automatic switch off.

The automatic switch off can be interrupted by pressing any key.

The timer menu is displayed.

Mark Timer Services .

Explanation of the symbols in the timer list:

Recording

Recording in progress

Memorised programme

Select the desired setting,

OK change.

OK adopt.

Repeated recording (daily, weekly or Mon-Fri)

Series recording

41

Loewe bild 5

Operating manual

Functions

Software update

It is possible to update the software on your Loewe TV set.

In the software update (package update) all the software releases in the TV set are scanned and updated as required.

Current software versions can be downloaded from the Loewe Internet site (see below) and installed on your TV set using a USB stick.

If your TV set is connected to the Internet, the TV set can be updated directly via the Internet.

For more information on the Internet update, please refer to the user manual which can be downloaded from the Loewe Internet site (see chapter Miscellaneous , section Documentation ).

Updating the software is not possible as long as a programmed timer recording is active.

When a software update occurs it may happen that timer entries and memorised programmes are deleted. After such a software update, check your timer list (see chapter Functions , section Timer ).

Please be aware of the USB stick requirements (see below).

Software update via USB storage device

To do this, plug the USB stick with the downloaded software into a free USB port of the TV set.

Calling Software update




Select Control ,

go to next column.

Select Software ,

go to next column.

Select Software update ,

go to next column.

Select Via USB ,

call Software update.

The version of the software package that is currently installed will be displayed.

Software download for updates via USB

Where available, you can download new software for your TV set from our homepage.

Visit our homepage under: www.loewe.tv/int/my-loewe

Choose the item Register now on the Service homepage. Simply follow the steps in the registration process.

After the successful registration process and subsequent login to the support homepage you have to register your TV set (have the article number and serial number ready – both of these are on a label stuck to the back of the set or can be looked up under System settings ט

Extras ט Integrated features .

Then you will get a list of downloadable contents for your TV set including the software. Download the data and unpack all the files in this ZIP archive into the main directory of your USB stick.

Then carry out the software update as described below.

Proceed .

The TV set searches for a new software package on the USB stick.

USB stick - requirements

Formatting in FAT32.

Just one partition.

Do not use encrypted USB sticks.

Do not use USB sticks that simulate a CD ROM drive.

There may be no hidden files on the device.

For some types of device, the construction of the USB stick is significant.

Maximum dimensions in mm: 70x20x10.

If in doubt, the USB stick should be formatted as “FAT32” without

“extended attributes”.

If a new software version is available after the search, an on-screen message appears.

If several different software packages are found on the

USB stick, the latest software package is always used.

If no new software package was found in the search:

BACK:

Or:

End of wizard

New software package found

Proceed

.

starts loading of the new software.

BACK: End of wizard .

The update will then not be carried out.

In order to avoid problems during the software update of the tv set the USB stick in use should meet the requirements.

Load new software package

The software is loaded in several steps. The total loading and programming process can take up to approx. 50 minutes in total.

Please do not switch off your TV set during the entire downloading and programming process and do not use the power switch.

You will be informed at the end of the update.

42

Loewe bild 5

Operating manual

Miscellaneous

Conditional Access module (CA module)

In order to receive coded digital stations, a Conditional Access module

(CA module) and a Smart Card must be inserted in the CI slot of your

TV set.

The CA module and the Smart Card are not part of the set of equipment supplied with the TV set. They are usually available from your dealer. Loewe does not provide any guarantee for the functioning of the CA module.

The TV set must first recognise and set up the CA module during initial operation. Therefore, it can take up to a minute until decoding starts during initial operation.

Inserting the Smart Card into the CA module

Push the The side of the card with the gold chip on it should be pointing towards the thicker side of the insertion slot (see illustration). Note the direction of the arrow printed on the Smart Card.

Searching for scrambled stations

If no search for encrypted stations was performed during initial startup, this can be done later using the search wizard.




Select Stations ,

go to next column.

Automatic scan TV+Radio ,

go to next column.

Select Change search settings ,

OK wizard guides you through the search settings.

Under scrambled stations you have to select yes .

Next select Start search/update ,

OK start updating the station list.

CA module Smart Card

Inserting the CA module into the TV set’s CI slot

Switch off TV set using the mains switch.

Remove the cover from the rear of the set.

Insert the CA module carefully into one of the two CI slots, ensuring that the contact side goes in first. Do not use force. Make sure the module is not twisted in the process. Push the CA module in as far as it will go.

Removing the CA module

Switch off TV set using the mains switch.

Remove the cover from the rear of the set.

Pull the CA module out of the CI slot.

Replace the cover.

Asterisk key function

You can assign the asterisk key on the remote control unit a particular function (App Gallery, picture/sound menu, sound mode, etc.).

The selected function will then be called directly when the key is pressed.

Finally, close the side cover.

Calling CA module information

This menu is only available when a CA module is plugged in.

Call Asterisk key settings

Default setting: Save station as favorite




Select Control ,

go to next column.

Select more ...

,

call other settings.

Select key function ,

go to next column.




Select Extras ,

go to next column.

Select desired CA module.

The indicated name depends on the inserted

CA module.

go to next column.

.

Select Module menu ,

OK call.

The content of this menu depends on the provider of the CA module.

OK

Select function,

Adopt.

43

Loewe bild 5

Operating manual

Miscellaneous

Integrated features

Here you can obtain information on the integrated features of the

TV set.

See the rating plate on the rear of the set for the precise product designation.

Call Integrated features




Select Extras ,

go to next column.

Select Integrated features ,

OK call Integrated features (1 .

VESA standard

Instructions on using third-party mounting options according to the VESA standard

Loewe flat screen TV sets are specified for Loewe accessories. When using third-party mounting options according to the VESA standard, the manufacturer‘s instructions on the mounting options must be observed.

Loewe accepts no liability for the use of mounting options from other manufacturers.

On the rear wall of the TV set, there are four points of screw connections to receive the VESA adapter bolts.

Mounting a Loewe flat screen TV set to a holder according to the VESA standard necessarily requires the use of Loewe VESA adaptor bolts.

Otherwise, the TV set may be damaged.

Screw the Loewe VESA adapter bolts with a torque of approx. 4 Nm into the screwing points of the TV rear panel (see Fig. 1).

1

First, possibly existing screws in the four screwing points must be removed.

2

D

Select category (e.g. hardware, software, etc.),

If necessary, scroll content up/down.

Documentation

Via the support portal of the Loewe homepage you can download a user handbook when available.

The operating manual and the user handbook are updated at irregular intervals.

Visit our homepage under: www.loewe.tv/int/my-loewe

Please select your TV set (current product line) in the product selection part of the User manuals section. You can then download the corresponding user guide/user manual in the form of a PDF file.

You can find user guides for previous product lines in the product selection under Archive .

The Loewe VESA adaptor bolts are used to ensure stability and the necessary minimum distance of 5 mm between rear wall of the TV set and VESA holder (see Fig. 2). The VESA holder must not rest on the rear panel.

When mounting the TV set, always check that all four Loewe VESA adaptor bolts are used. For each mounting point, only one VESA adapter bolt may be used. It is inadmissible to screw several VESA adapter bolts or extend individual adapter bolts.

Measure the hole distance between the screwing points of your TV set. A hole distance of 400 x 400 mm on the rear of the TV set means

VESA 400 standard.

Thus, a suitable mount bracket must also correspond to the VESA 400 standard. If the VESA standard of your TV set fits the standard of the desired bracket, the bracket has also to be approved for the weight and size of the TV set (for weight and TV set size refer to chapter

Technical Data ).

Loewe is not responsible for the permissible load-carrying capacity and the professional fixing of the holder.

Conformity / Manufacturer’s declaration

Loewe Technologies hereby declares that this product meets the essential requirements and other relevant provisions of Directive 1999/5/EC and all applicable EU directives.

It may be operated in all countries in the EU and also in Iceland ,

Norway and Switzerland . In France and Italy it may only be used indoors .

You can find the complete declaration of conformity in the product selection at: www.loewe.tv/int/my-loewe

Please observe additionally and definitely the points described in the chapter on safety instructions.

If you use a Vesa mounting options from other manufacturers, you can order the Vesa adapter bolts M6x32 (No. 90473.988) at your authorized dealer of Loewe.

(1 The screen graphic displayed is only an example. Depending on the device type, the available hardware/software components may be different.

44

Loewe bild 5

Operating manual

Technical data

Technical data

Changes of technical data and design of the equipment reserved.

Loewe device type: bild 5.55

bild 5.48

bild 5.40

bild 5.32

Part number:

EU energy efficiency class:

Screen diagonal:

56428xxx 56430xxx 56427xxx see enclosed energy label or under www.loewe.tv/int/my-loewe

140 cm / 55 inch 122 cm / 48 inch 102 cm / 40 inch

56426xxx

81 cm / 32 inch

Power consumption On-Mode (max.)

(Audio output 1/8 of the maximum value):

Power consumption On-Mode (home) (1 :

Annual energy consumption (1 :

Power consumption Standby Mode:

Power consumption when set is switched off:

Resolution:

Display technology / Picture format:

Viewing angle (horizontal / vertical):

228 W 164 W see enclosed energy label or under www.loewe.tv/int/my-loewe

0,38 W

0 W

Ultra HD 3840 x 2160 px

LCD with Edge-LED-Backlight / 16:9

178° / 178°

0,38 W

0 W

125 W

0,38 W

0 W

75,0 W

0,40 W

0 W

(4A / 73,0 W (4B

Full HD 1920 x 1080 px

Device dimensions without stand (W x H x D):

Device dimensions with stand (2

Weight with stand (2

(W x H x D):

Weight without stand (approximate):

(approximate):

122,9 x 75,1 x 5,5 cm

122,9 x 75,1 x 6,8 cm

27,6 kg

29,1 kg

107,8 x 66,8 x 5,5 cm

107,8 x 69,9 x 25,7 cm

18,8 kg

21.3 kg

90,9 x 57,4 x 5,5 cm

90,9 x 60,4 x 25,7 cm

15,5 kg

18,1 kg

72,9 x 47,7 x 5,3 cm

72,9 x 50,8 x 21,3 cm

9,7 kg

11,7 kg

Ambient temperature:

Relative humidity (non-condensing):

Air pressure:

Chassis designation:

5° C – 35° C

20 – 80%

800 – 1114 hPa (0 – 2000 m above sea level)

SL 420 SL320F (4A / SL310F (4B

Power supply:

Tuner:

Range: terr./cable:

Satellite: terr./cable:

Satellite:

Station storage locations incl. AV and radio:

TV standards: analogue: digital:

Colour standards:

Sound formats:

220 V – 240 V/50–60 Hz

VHF/Hyperband/UHF

4 levels: 13/18V/22kHz / 16 levels: DiSEqC 1.0 / single-cable system: EN 50494

Terr./cable: 45 MHz up to 860 MHz

Satellite: 950 MHz up to 2150 MHz

6000

B/G, I, L, D/K, M, N

DVB-T/T2, DVB-C/C2 (5A (5B , DVB-S/S2 (UHD via DVB to max. 60 Hz)

SECAM, PAL, NTSC, NTSC-V, PAL-V (60 Hz) analogue (FM): analogue (NICAM): digital (MPEG):

Mono, Stereo, Dual channel

Mono, Stereo, Dual channel

Mono, Stereo, Dual channel, PCM, Dolby Digital, Dolby Digital Plus, Dolby Pulse, Dolby MS11

(Dolby Virtual Speaker, Dolby Pro Logic II, Dolby TrueHD, DTS, DTS HD)

Audio output power (sine / music):

Acoustic speaker concept:

2 x 20W / 2 x 40W

Speaker Box

Teletext:

Page memory:

LAN:

WLAN:

TOP / FLOF / HiText (Level 2.5)

2000

Standards supported: 10 Mbit/sec Ethernet (10Base-T) / 100 Mbit/sec Fast Ethernet (100Base-T)

Standards supported:

Frequency range used:

Types of encoding that are supported:

IEEE 802.11a/b/g/n, 802.11ac

2400-2483,5 MHz and 5150-5725 MHz

WEP 64 and 128 Bit (ASCII and HEX), WPA PSK, WPA2 AES

Home networking standard:

File formats supported (3 : Pictures:

Audio:

Video:

Universal Plug and Play Audio / Video (UPnP AV)

JPEG, PNG

MP3, M4A (AAC LC), WMA (without lossless), FLAC, WAV (PCM), Ogg Vorbis

AVI (MPEG-1/2, XviD, Dolby Digital, MP3), WMV (WMV9, VC-1, WMA9, WMA Pro),

MP4 (XviD, H.264/MPEG-4 AVC, AAC LC), MOV (H.264/MPEG-4 AVC, AAC LC),

MKV (H.265/HEVC, H.264/MPEG-4 AVC, Dolby Digital), FLV (H.264/MPEG-4 AVC, H.263,

MP3, AAC LC), MPG (MPEG-1, MPEG Audio), TS/PS (MPEG-2, H.264/MPEG-4 AVC, MPEG2 Audio,

Dolby Digital), VOB (MPEG-2, MPEG2 Audio, Dolby Digital)

H.264/MPEG-4 AVC upto Profil High (Level 4.2)

(1 The energy consumption per year is calculated on the basis of a daily four-hour operation of the TV set on 365 days. The actual energy consumption will depend on the way the TV set is used. On-Mode (home) values less than 100 W must have decimal places (,0).

(2 Supplied mounting option: WM67 (bild 5.55), Table Stand bild 5.40/48 (bild 5.40/48), Table Stand bild 5.32 (bild 5.32).

(3 For the playability of the individual formats no guarantee can be given.

(4 A: Device type bild 5.32 DR+ (56246x55). B: Device type bild 5.32 (56246x85). 45

Loewe bild 5

Operating manual

Environment

Legal information

Environmental protection

Power consumption

Your TV set is equipped with an eco-standby power supply. In the standby mode, the power consumption drops to low power (see chapter Technical data ). If you want to save even more energy then switch the device off with the mains switch. Please also note that the EPG data (Electronic Programme Guide) is lost under certain circumstances and possibly programmed timer recordings cannot be carried out by the TV set.

The TV set will be completely separated from mains only when you unplug the mains cable.

The power consumed by the TV set during operation depends on the energy efficiency preset in the initial installation or on the setting in the system settings.

If you activate the automatic dimming, your TV picture will adapt to the ambient brightness. This reduces the power consumption of the

TV set.

If the TV set is not operated for 4 hours (adjustment of volume, programme change, etc.) the TV set will automatically switch to standby mode to save energy. A prompt to terminate this shutdown process appears one minute before expiry of the 4 hours.

Licences

Manufactured under licence from Dolby Laboratories. “Dolby”, “Pro

Logic” and the double-D symbol are trademarks of Dolby Laboratories.

Connect 55/48/40: Connect 32 (54446x55):

For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited. DTS, the Symbol, DTS in combination with the Symbol, DTS-HD, and the DTS-HD logo are registered trademarks or trademarks of DTS, Inc. in the United States and/or other countries. © DTS, Inc. All Rights Reserved.

In case of Connect 32 ( 54446x85 ):

Manufactured under licence from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories.

Cardboard box and packaging

You have made a decision to purchase a high-quality technical product with a long service life. For disposal of the packaging, we have paid a fee to a commissioned recycler to pick up the packaging from the dealer in accordance with national legislation.

The k identific pa re

The device

The EU directive 2002/96/EG regulates the proper way to recycle, handle and utilise used electronic devices. Old electronic appliances must therefore be disposed of separately. Never dispose of this device in normal domestic waste !

You can hand in your old unit free of charge at identified collection points or to your dealer if you buy a similar new unit. Other details about re-acceptance (also for non-EU countries) are available from your local municipal administration.

Batteries

The batteries supplied as initial equipment do not contain any pollutants such as cadmium, lead, or mercury.

In accordance with the Battery Directive, used batteries should waste no longer be disposed of in the pose in retail stores.

domestic

. Dispose of your batteries at no charge in the collection containers which are set up for this pur-

This set contains a software which is partly based on the work of the

Independent JPEG Group.

This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit (http://www.openssl.org/).

This software is provided by the OpenSSL project “as is“ and any expressed or implied warranties, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose are disclaimed. In no event shall the OpenSSL project or its contributors be liable for any direct, indirect, incidental, special, exemplary, or consequential damages (including, but not limited to, procurement of substitute goods or services; loss of use, data, or profits; or business interruption) however caused and on any theory of liability, whether in contract, strict liability, or tort (including negligence or otherwise) arising in any way out of the use of this software, even if advised of the possibility of such damage.

This product includes cryptographic software written by Eric Young

([email protected]).

This product includes software written by Tim Hudson (tjh@cryptsoft.

com).

✄ ey number

3001 sa fe

plac se e.

in validat

k eep it in a es an

46

This product contains software which was developed by third parties and / or software which is subject to GNU General Public License (GPL) and/or GNU Lesser General Public License (LGPL). You can pass on and modify them in accordance with Version 2 of the GNU General

Public License or optionally every later version which is published by the Free Software Foundation.

The publication of this programme by Loewe is carried out WITHOUT

ANY GUARANTEE OR SUPPORT, particularly without an implicit guarantee concerning MARKET MATURITY or the USABILITY FOR A

SPECIFIC PURPOSE. Details can be found in the GNU General Public

License. You can obtain the software via the Loewe customer service department.

The GNU General Public License can be downloaded from: http://www.gnu.org/licenses/.

Loewe bild 5

Operating manual

Index

A

Antenna DVB ................................................ 40

Apps .........................................................15, 38

Archive recording ..........................................24

Artist Search .................................................35

Asterisk key function ................................... 40

Audio playback ............................................. 33

Audio/Radio ..................................................32

Auto dimming ............................................... 40

Auto format (AMD) ...................................... 40

Automatic aspect ratio ................................ 40

Automatic menu info .................................... 13

Automatic rotate .......................................... 36

Automatic scan TV+Radio .......................... 40

Automatic shutdown ......................................5

Auto volume ................................................. 40

AV connecting settings ................................ 40

AV list ............................................................. 19

AV output signal ........................................... 40

B

Balance ......................................................... 40

Brightness .................................................... 40

Browser ......................................................... 39

C

Cable fixing ......................................................9

CA modul ...................................................... 43

Changing the station list ............................... 16

CI slot ............................................................ 43

Cleaning and care ...........................................5

Clock display ................................................. 13

Color intensity .............................................. 40

Coloured keys ................................................22

Colour temperature ..................................... 40

Conformity / Manufacturer’s declaration .. 44

Connecting antennas .....................................9

Connecting home network ...........................10

Connecting the TV set ....................................9

Connections ................................................. 40

Contrast ........................................................ 40

Control .......................................................... 40

Crossover ..................................................... 36

D

Deblocking filter ........................................... 40

Digital-Link .................................................... 40

Digital Noise Control (DNC) ........................ 40

Digital Recorder ............................................24

Direct recording .............................................24

Documentation ............................................ 44

DR+ ............................................................... 40

DR+ archive .................................................. 26

DR+ Streaming ........................................27, 40

DVB settings ................................................. 40

E

Energy efficiency .....................................14, 40

Environment ................................................. 46

EPG .........................................................20, 40

Explanation of keys ....................................... 13

Explanation of symbols ................................ 13

Export log file ................................................ 40

Extras ............................................................ 40

F

Favourites ...................................................... 15

Film quality improvement (DMM) .............. 40

FLOF ...............................................................22

Follow-Me function .................................27, 30

Function list ................................................... 19

G

Gaming mode ............................................... 40

Gamma brightness correction .................... 40

General information on the operation ..........11

H

Hard disks ..................................................... 40

HbbTV ..................................................... 23, 40

HbbTV text ....................................................23

HDMI ............................................................. 40

History ........................................................... 17

Home ............................................................. 15

Home view ..................................................... 15

I

Image+ Active .............................................. 40

Initial installation ........................................... 14

Inserting or replacing batteries ......................7

Instant Channel Zapping .............................. 16

Instant recording ...........................................24

Integrated features ................................. 40, 44

Interval functions .......................................... 31

J

Jump .............................................................. 31

Jumping to Bookmarks ................................ 31

L

Language .................................................14, 40 licence agreement ........................................ 14

Loudness ...................................................... 40

M

Mains switch .............................................. 7, 10

Manuell scan (incl. antenna status) ............ 40

Maximum switch on volume ....................... 40

Maximum volume ........................................ 40

Mobile phone keypad .................................... 12

Mobile Recording ................................... 28, 40

Move picture up/down ................................. 40

Multimedia / Network ................................. 40

Multimedia settings ..................................... 40

Multi recording ..............................................25

N

Network settings .......................................... 40

Numerical keys ......................................... 11, 16

O

One touch recording .....................................24

On-screen displays ...................................... 40

P

Page selection ...............................................22

Parental lock ................................................. 40

Permanent clock display .............................. 13

Personal list ................................................... 17

Photo ............................................................. 36

Exit .............................................................37

Full-screen mode ......................................37

Rotate photo ..............................................37

Slide show .................................................37

Picture ........................................................... 40

Picture adjustment ...................................... 40

Picture format .............................................. 40

PIP ............................................................21, 40

Q

Quick start mode ......................................... 40

R

Radio mode ............................................ 34, 35

Recordings .................................................... 15

Remote control ...........................................6, 7

Removing the battery protection ...................7

Renderer ....................................................... 40

Repeat initial installation .............................. 40

Reset to factory settings .............................. 40

S

Safety ...........................................................4, 5

Scope of delivery .............................................3

Scrambled stations ...................................... 43

Search for artists ..........................................35

Selecting a station out of the station list ..... 16

Select station ................................................ 16 using the numerical keys .......................... 16 via personal lists ........................................ 17 with P+/P- ................................................. 16

Set covers ........................................................9

Setting the volume ........................................ 16

Sharpness .................................................... 40

Skin tone ....................................................... 40

Slide show speed ......................................... 36

Smart Card ................................................... 43

Smart Jump .................................................. 31

Software ........................................................ 40

Software download ...................................... 42

Software update

Via USB memory medium ...................... 42

Sound ............................................................ 40

Sound adjustment ....................................... 40

Sound components ..................................... 40

Sound mode ................................................. 40

Sound picture synchronisation ................... 40

Sources .......................................................... 15

Standard Teletext ......................................... 40

Standby mode ...............................................10

Station lists Radio ........................................ 40

Station lists TV ............................................. 40

Stations ......................................................... 40

Station search ...............................................35

Status display ................................................ 18

Stop recording early .....................................25

Switching off the TV set during recording ...25

Switch off .......................................................10

Switch on .......................................................10

Switch to live picture .....................................24

System settings ......................................15, 40

T

Teletext ..........................................................22

TIDAL login ................................................... 40

Time and date .............................................. 40

Time display .................................................. 13

Timer .............................................................. 41

Timer list .................................................... 41

Timer Services .......................................... 41

Time shift .......................................................24

TOP ................................................................22

Transfer all station lists ................................ 40

TV ..............................................................15, 16

TV key ..............................................................7

TV viewing with time shift ............................24

U

Update station list automatically ................ 40

UPnP ..............................................................10

V

Value-added service .................................6, 23

VESA standard ............................................. 44

Video ............................................................. 29

Video playback ............................................. 30

Viewing another programme from the archive during archive recording .............................24

Volume adjustment ..................................... 40

W

Watching other stations during archive recording ...............................................................24

47

Loewe bild 5

Operating manual

Service

Qualifi Pty Ltd

24 Lionel Road

Mt.Waverley VIC 3149 Australia

Tel +61-03-8542 1111

Fax +61-03-9543 3677

E-mail: [email protected]

Gaplasa S.A.

Conde de Torroja, 25

28022 Madrid, España

Tel +34 - 917 48 29 60

Fax +34 - 913 29 16 75


Loewe Opta Benelux NV/SA

Uilenbaan 84

2160 Wommelgem, België

Tel +32 - 3 - 2 70 99 30

Fax +32 - 3 - 2 71 01 08


Loewe France SAS

Rue du Dépôt,

13 Parc de l l‘Europe, BP 10010

67014 Strasbourg Cédex, France

Tel +33 - 3- 88 79 72 50

Fax +33 - 3- 88 79 72 59


Telion AG

Rütistrasse 26

8952 Schlieren, Schweiz

Tel +41 - 44 732 15 11

Fax +41 - 44 732 15 02


EET Europarts

Loewe Finland

Metsänneidonkuja 12

02130 Espoo, Finland

Tel +358 9 47 850 900 www.eeteuroparts.fi

Guangdong MG Audio Development Co.Ltd

No.8 Jinghu Rd. Xinhua St. Huadu Reg.

GZ, PRC

Tel +86-(0)20-22675666

Fax +86-(0)20-22675777


Xiamen Tenote Investment Co. Ltd

26F 3# Xinglin Bay Operation Center,

No.478 xinglinwan Avenue,

Jimei District, Xiamen, Fujian, PRC

Tel +86-400 088 1566


Hadjikyriakos & Sons Ltd.

121 Prodromos Str., P.O Box 21587

1511 Nicosia, Cyprus

Tel +357 - 22 87 21 11

Fax +357 - 22 66 33 91


Loewe UK Limited

1st Floor, 237A Kensington High St

London

W8 6SA, UK

Tel +44 - (0) 207 368 1100

Fax +44 - (0) 207 368 1101


Issagogiki Emboriki Ellados S.A.

321 Mesogion Av.

152 31 Chalandri-Athens, Hellas

Tel +30 - 210 672 12 00

Fax +30 - 210 674 02 04

E-mail: christina_argyropoulou@ isembel.gr

BaSys CS s.r.o.

Sodomkova 1478/8

10200 Praha 10 - Hostivar,

Česká republika

Tel +420 234 706 700

Fax +420 234 706 701


Plug&Play Ltd.

Bednjanska 8, 10000 Zagreb

Hrvatska (Kroatia)

Tel +385 1 4929 683

Fax +385 1 4929 682


Loewe Technologies GmbH,

Customer Care Center

Industriestraße 11

96317 Kronach, Deutschland

Tel +49 9261 99-500

Fax +49 9261 99-515

E-mail: [email protected] www.loewe-friends.de

Loewe Italiana S.r.L.

Via Monte Baldo, 14/P – 14/N

37069 Dossobuono di Villafranca di

Verona

Tel +39 - 045 82 51 690

Fax +39 - 045 82 51 622


Clear electronic entertainment Ltd

13 Noah Mozes St.

Agish Ravad Building

Tel Aviv 67442, Israel

Tel +972 - 3 - 6091100

Fax +972 - 3 - 6092200


EET Europarts

Loewe Denmark

Bregnerødvej 133 D

3460 Birkerød, Denmark

Tel +45 - 82 19 19


Nonplus Ultra Home Automation Pvt Ltd

First Floor, No. 615, Second Main Road

Indiranagar Stage I, Indiranagar

Bangalore 560038

India

Tel +91 80 41114599


3LOGIC Sp.z o.o. ul. Zakopiańska 153

30-435 Kraków

Tel +48 - 12 640 20 00

Fax +48 - 12 640 20 01 www.3logic.pl

Pars Royal Taramesh

LOEWE Gallery

#3 Shariati St. Opp. Soheil St.

P.O Box 1914965537

Tehran, Iran

Tel + 98 21-22391661

E-Mail: [email protected]

JOR

ACCU-TECH Solutions Co.

1-Kharija Al-Ashja‘i Street

Jabal Al-Weibdeh

P.O.Box 9668 Amman 11191, Jordan

Tel: +962-6-465-9985

Fax: +962-6-465-0119

E-Mail: [email protected]

V2 Indonesia

5th Intiland tower

Jl. Jenderal Sudirman 32

Jakarta 10220, INDONESIA

Tel +62-21 57853547


I Control SAL

Gemmaizeh, Rmeil.

Building 328 1st Floor Beirut, Lebanon

Tel +961 1 446777 / 1 587446

Fax +961 1 582446


LOEWE Show Room

Olaya Street, Near Kingdom Center

RIYADH, SAUDI ARABIA

P.O Box 92831 Riyadh 11663

Tel +966-11-4640927

Fax +966-11-4640759


Service Center Loewe

Aptekarsky per.4 podjezd 5A

105005 Moscow, Russia

Tel +7 - 499 940 42 32 ( ext. 454 )

Fax +7 - 495 730 78 01


Kpartners, SIA

A.Čaka iela 80

Rīga, LV-1011, Latvia

Tel +3 71 - 67 29 29 59

Fax +3 71 - 67 31 05 68


EET Europarts AB

Loewe Sweden

Box 4124

SE-131 04, Nacka, Sverige

Tel +46 - 8 507 510 00


A Cappella Ltd.

Ausros Vartu 5, Pasazo skg.

01129 Vilnius, Lithuania

Tel +370 - 52 12 22 96

Fax +370 - 52 62 66 81


Atlas Care Centre

11 changi south street 3

#03-01 builders centre

Singapore 486122

Tel +65 - 6745 2028

Fax +65 - 6546 7861


EET Europarts AS

Olaf Helsetsvei 6 (Vekstsenteret)

0694 Oslo, Norge

Tel +47 - 22919500


ENKAY GROUP

SERVISPLUS MUSTERI HIZMETLERI

Alemdag Cad. Site Yolu No:18

Umraniye, Istanbul, TÜRKIYE

Tel 444 4 784


Gaplasa S.A.

Rua Professor Henrique de Barros

Edifício Sagres, 2º. C

2685-338 Prior Velho, Portugal

Tel +351 - 21 942 78 30

Fax +351 - 21 940 00 78


Volco Enterprise Close Corporation

Unit 8

7 on Mastiff (Road)

Longlake Ext 1, Lingbro Business Park

2165 Johannesburg

Tel +27 11 608 1228

Fax +27 11 608 1740


© by Loewe Technologies 01.08.16

48

Loewe bild 5.32, bild 5.40, bild 5.48, bild 5.55 Operating Manual

Loewe bild 5

Operating manual

Many features, one result: perfect Home Entertainment.

About this operating manual

General information on the operation of the

TV set

Interactive data services

Important information

Scope of delivery

Imprint

±10°

Technical information

Remote control button mapping

Functions of the operating controls Preparing the remote control unit

Position and function of the connections

Installing the TV set Connecting the TV set

Set covers

Cable fixing

Switching the TV set ON/OFF

General information on the operation

Explanation of keys

Explanation of symbols

Automatic menu info

Permanent clock display

Initial installation wizard

Home view Home view - Favourites

TV

Setting the volume

Select station

History

Status display

Function list (TV mode)

Sources

Electronic Programme Guide – EPG

Picture in Picture (PIP)

Teletext

HbbTV / MediaText

TV viewing with time shift

Archive recording

Multi recording

DR+ archive

DR+ Streaming

Follow-Me function

Mobile Recording

Video

Video playback

hh:mm

Additional functions for DR+ archive playback

Audio/Radio

Audio playback

Radio mode (DVB radio)

Radio mode (Internet radio)

Photo

Photo display

Apps

App Gallery

Browser

System settings

Timer

Software update

Software update via USB storage device

Conditional Access module (CA module)

Asterisk key function

Integrated features

VESA standard

Documentation

Conformity / Manufacturer’s declaration

Technical data

Environmental protection

Licences

Related manuals

LOEWE

Bild 3.55

LOEWE

Connect ID 46 DR plus

LOEWE

One 55

LOEWE

Reference 55