Bosch FlexiDome NDN-498V03-22P, NDN-498 Specifications
Add to My manuals8 Pages
Bosch FlexiDome NDN-498V03-21P is a high-performance Day/Night IP camera that delivers superior image quality in various lighting conditions. With its 1/3-inch CCD sensor, 20-bit image processing, and wide dynamic range, this camera captures sharp, detailed images with accurate color reproduction. It supports quad streaming, allowing simultaneous transmission of two H.264 streams, an I-frame recording stream, and an M-JPEG stream for versatile viewing and recording options.
advertisement
Video | NDN-498 FlexiDome2X Day/Night IP Cameras
NDN-498 FlexiDome2X Day/Night IP
Cameras
▶ 1/3-inch Day/Night CCD with progressive scan
▶ 20-bit image processing technology
▶ Wide Dynamic Range, 2X‑dynamic engine and
SmartBLC
▶ Quad streaming
▶ Local storage for flexible recording
▶ Intelligence at the edge
▶ ONVIF conformant
▶ High-impact, vandal-resistant enclosure
FlexiDome2X Day/Night IP cameras are progressive scan
CCD cameras in a compact, high-impact rated, vandalresistant housing.
Equipped with 20-bit DSP with 2X‑dynamic, they have a wide dynamic range for sharper, more detailed images with outstanding color reproduction.
They can tri-stream video simultaneously — on two H.264
streams, an I-frame recording stream, and an M-JPEG stream. Features such as multicasting, internet streaming and iSCSI recording are fully supported. FlexiDome2X IP cameras have built-in video motion detection and additional processing power for video content analysis systems.
Supported by the award-winning Dinion2X digital imaging technology, they provide a proven, dependable solution for many security and surveillance requirements, day or night.
Functions
Progressive scan
To capture sharp images, even in busy scenes with high motion content, the Dinion camera uses progressive scan technology.
Superior image quality
With a 1/3-inch CCD and Bosch’s advanced digital signal processing, the FlexiDome2X Day/Night IP camera provides outstanding image quality in virtually all situations. The highly accurate 20-bit digital signal is automatically processed to reveal every detail of the image in both the high and low-light areas of the scene simultaneously.
20-bit Image Processing
The highly accurate digital signal processing optimally captures the detail in both bright highlights and deep shadows simultaneously. By combining 20-bit image processing and wide dynamic range, the FlexiDome2X maximizes the information visible in the picture even with strong backlight.
Wide Dynamic Range
The superior wide dynamic range performance for all lighting conditions reveals details previously unseen.
2X-Dynamic and SmartBLC
Using 2X-Dynamic technology, pixel-by-pixel analysis provides the user with the most detailed information. Turn on SmartBLC to automatically compensate the image without the need for complicated set-up or without compromising dynamic range. Features such as Autoblack and Sharpness further improve the details in a scene, pixel by pixel.
www.boschsecurity.com
2 | NDN-498 FlexiDome2X Day/Night IP Cameras
Programmable Modes
Six independent, pre-programmed operating modes support typical applications, but are fully programmable for individual situations.
Day/Night switching
In night mode, the camera enhances low light viewing by switching the IR (infrared) filter out of the optical path and providing a monochrome image. The camera can switch from color to monochrome mode automatically by sensing the illumination level, manually via the alarm input, or remotely via a web browser. An internal, throughthe-lens IR detector enhances monochrome mode stability by preventing the camera from returning to color mode when IR-illumination is dominant.
Privacy masking
Four different privacy zones allow specific parts of a scene to be blocked. A mask for any part of the scene can be pre-programmed.
Default Shutter
The default shutter speed captures fast moving objects when sufficient light is available. When light levels fall and other adjustments have been exhausted, the shutter speed reverts to a standard setting to maintain sensitivity.
SensUp Dynamic
By increasing the integration time up to 10 times on the
CCD, the effective sensitivity is dramatically enhanced.
This is especially useful when relying only on moonlight for illumination.
Efficient bandwidth and storage management
The cameras use H.264 compression, bandwidth throttling, and multicasting capabilities to manage bandwidth and storage requirements efficiently, while delivering high image quality and resolution.
The bandwidth of an H.264 stream using Main profile at
4CIF resolution is about the same as one MPEG-4 stream at 2CIF resolution.
Bosch's innovative quad-streaming feature enables
FlexiDome2X IP cameras to generate two independent H.
264 streams, an I-frame recording stream, and an M-JPEG stream simultaneously. This allows streaming of highquality H.264 images for live viewing and recording while streaming M-JPEG images to another device at the same time. The M-JPEG video stream also provides easy integration with third-party JPEG or M-JPEG-compatible video management systems.
FlexiDome2X IP cameras offer unparalleled recording options. Attached to the network, they can use iSCSI targets directly without any additional recording software.
The recording capabilities of the system can be further enhanced by using the Bosch Video Recording Manager.
The camera also supports local recording on a microSD card. This can be used for local alarm recording or for
Automatic Network Replenishment (ANR) to improve the overall reliability of video recording.
Standard intelligence
With built-in video content analysis, the camera reinforces the Intelligence-at-the-Edge concept where edge devices become increasingly intelligent. The MOTION+ video motion analysis system, that is built into all camera versions, is the perfect solution for applications where basic video content analysis features are required. This motion analysis algorithm is based on pixel change and includes object size filtering capabilities and sophisticated tamper-detection capabilities.
Hardware enhanced
The hardware-enhanced version of the camera gives you the opportunity to upgrade the video content analysis features of the camera with the more advanced Intelligent
Video Analysis (IVA) option. This option bases the IVA algorithm on digital imaging technology that uses multilevel image analysis of pixels, texture, and object direction, and is activated by installing a license.
ONVIF conformance
The camera conforms to the ONVIF (Open Network Video
Interface Forum) specification which guarantees interoperability between network video products regardless of manufacturer. ONVIF conformant devices are able to exchange live video, audio, metadata and control information. They are automatically discovered and connected to network applications such as video management systems.
Tough design
The cast-aluminum housing, polycarbonate dome, and hardened inner liner can withstand the equivalent of 55 kg
(120 lbs) of force. The enclosure contains the full-featured camera and integral varifocal lens. Ideal for outdoor use, the cameras are protected against water and dust to IP 66
(NEMA‑4X) standards. The camera enclosure provides the extra protection necessary for applications such as schools, banks, prisons, parking garages, retail and industrial buildings.
Installation is quick and easy, as the camera comes completely assembled and ready to use. Using the proprietary pan/tilt/rotation mechanism, installers can select the exact field of view. Mounting options are numerous, including surface, wall, corner and suspended ceiling. The compact, sleek design and virtually flushmount appearance complements any decor.
NDN-498 FlexiDome2X Day/Night IP Cameras | 3
Unsurpassed flexibility
There are many ways to access the camera’s video: on a
PC using a web browser, with the Bosch Video
Management System, or with the Bosch Video Client. The camera is also ideal for use with a Divar 700 Series digital video recorder. By routing a video stream to a Bosch video decoder, you can also present the video with ultimate clarity on an analog monitor.
Cost effective, simple installation
Three power options, PoE (Power-over-Ethernet), 24 VAC and 12 VDC are available. Using PoE makes installation easier and more cost-effective, as cameras do not require a local power source. To increase system reliability, the camera can be simultaneously connected to both PoE and
12 VDC/24 VAC supplies. Additionally, uninterruptible power supplies (UPS) can be used, which will allow continuous operation, even during a power failure.
For trouble free network cabling, the cameras support
Auto-MDIX.
FlexiDome2X IP cameras have a service mode for easy installation using the control buttons and an analog video output on the camera as an alternative to configuration over IP. The service mode is simply activated by pressing a button on the camera. This routes the video to the analog output, bypassing the IP video output. The On-
Screen Display (OSD) simplifies back focus adjustment and network configuration, minimizing installation and support costs. The Lens Wizard automatically detects the lens type and helps focus the lens at the maximum opening to maintain proper focus.
Easy Upgrade
Remotely upgrade the camera whenever new firmware becomes available. This ensures up-to-date products, thus protecting investment with little effort.
Access Security
Various security levels are available for accessing the network, the camera, and the data channels. As well as password protection with three levels, 802.1x
authentication using a RADIUS is supported. To secure
Web browser access use HTTPS with a SSL certificate stored in the camera. For total data protection, the video and audio communication channels can be independently
AES encrypted with 128‑bit keys by installing the optional
Encryption Site License.
Typical applications
• Prisons and correctional facilities
• Traffic monitoring (air, land and sea)
Hotels, bars and nightclubs
• Commercial and government buildings
City surveillance and safety
•
Border control
Certifications and Approvals
Region
Europe
USA
Certification
CE
FCC
Declaration of Conformity
+ UL (microSD slot versions only)
Electro Magnetic Compatibility
Emission EN55022 Class B
EN61000-3-2
EN61000-3-3
CFR. 47 FCC Part 15: class B
Immunity
Safety
EN50130-4 (PoE, +12 VDC)
EN55024 (24 VAC)
EN50121-4
EN60950-1
UL60950-1 (2nd edition)
CAN/CSA-C 22.2 No. 60950-1
Vibration As per IEC60068-2-6 (5 m/s 2 , operational)
Installation/Configuration Notes
Ordering chart
1 N
2 D
3 N
4 498
5 V
6 03
06
09
7 1
2
8 1
9 P
10
2
2I
S
* No license included
Network camera
Dome (FlexiDome fixed dome)
Day/Night
Dinion2X performance
Varifocal lens, auto iris
2.8 to 10 mm F1.2
6 to 50 mm F1.6
9 to 22 mm F1.4
PAL 50 Hz
NTSC 60 Hz
Motion+
IVA ready *
IVA enabled
PoE
Flush mount (blank)
Surface mount www.boschsecurity.com
4 | NDN-498 FlexiDome2X Day/Night IP Cameras
Flush Mounting VDA-PMT-DOME –Pendant Pipe Mount
88 (3.47)
Ø11 (0.43)
Surface Mounting
656 (25.82)
VDA-CMT-DOME –Corner Mount mm (in)
VDA-WMT-DOME –Pendant Wall Mount
113 (4.43)
46 (1.81)
Ø4.8 (
0.19)
Ø158 (6.23)
Ø133 (5.24)
90 (3.54)
25 (0.98)
3-3/4"NPT
180 (7.
09)
81 (3.21) mm (in)
Parts Included
1
1
1
1
Quantity Component
1
1
1
1
NDN-498 Series FlexiDome2X Day/Night IP Camera
Lens adjustment cap (focus aid)
Safety instructions
Quick Install Guide
Mini DVD-ROM with manuals, software, and tools
Mounting hardware kit + screwdriver bit
RJ45 network connector
Template for flush mount
Note MicroSD card is not included in a standard delivery.
mm (in) 205 (8.07)
Technical Specifications
Electrical
Model No.
NDN-498Vxx-1xP
NDN-498Vxx-2xP
Current Consumption
Power Consumption
Rated Voltage Rated Frequency
24 VAC ±10%
12 VDC ±10%
Power-over-Ethernet
50 Hz
24 VAC ±10%
12 VDC ±10%
60 Hz
Power-over-Ethernet
550 mA | 700 mA IVA (12 VDC)
550 mA | 700 mA IVA (24 VAC)
200 mA (PoE 48 VDC)
6.6 W | 8.4 W IVA (12 VDC)
8.2 W | 10.4 W IVA (24 VAC)
9.6 W (PoE 48 VDC)
Sensor
Type
Active Pixels (PAL)
Active Pixels (NTSC)
1/3-inch CCD, WDR, dual shutter
752 x 582
768 x 494
Video
Video compression
Data rate
Resolution
• 4CIF
•
CIF
Overall IP Delay
H.264 (ISO/IEC 14496-10); M-JPEG,
JPEG
9.6 Kbps to 6 Mbps
Horizontal x vertical (PAL/NTSC ips)
704 x 576/480 (25/30 ips)
352 x 288/240 (25/30 ips)
Min. 120 ms, Max. 240 ms
GOP structure
Frame rate
I, IP, IBBP
1 to 50/60 (PAL/NTSC) H.264
1 to 25/30 (PAL/NTSC) M-JPEG
Video Out (service mode only)
Signal
Connector
Horizontal resolution
Video S/N
Analog composite (NTSC or PAL) for service only
2.5 mm jack, 75 Ohm
540 TVL
50 dB
Sensitivity (3200 K, scene reflectivity 89%)
Full video
(100 IRE)
Usable picture
(50 IRE)
NDN-498V03 (F1.2)
Color 2.48 lx
(0.23 fc)
Color
+ SensUp 10x
Monochrome
0.248 lx
(0.023 fc)
1.01 lx
(0.093 fc)
0.621 lx
(0.058 fc)
0.062 lx
(0.0058 fc)
0.23 lx
(0.021 fc)
Minimum illumination (30 IRE)
0.28 lx
(0.027 fc)
0.028 lx
(0.0027 fc)
0.099 lx
(0.0092 fc)
NDN-498 FlexiDome2X Day/Night IP Cameras | 5
Sensitivity (3200 K, scene reflectivity 89%)
Monochrome
+ SensUp 10x
0.1 lx
(0.0093 fc)
0.023 lx
(0.0021 fc)
NDN-498V06 (F1.6)
Color 3.53 lx
(0.356 fc)
0.90 lx
(0.09 fc)
0.09 lx
(0.009 fc)
Color
+ SensUp 10x
Monochrome
Monochrome
+ SensUp 10x
0.353 lx
(0.035 fc)
1.43 lx
(0.144 fc)
0.14 lx
(0.014 fc)
NDN-498V09 (F1.4)
Color 2.7 lx
(0.26 fc)
Color
+ SensUp 10x
Monochrome
Monochrome
+ SensUp 10x
0.27 lx
(0.026 fc)
1.1 lx
(0.090 fc)
0.11 lx
(0.01 fc)
0.35 lx
(0.035 fc)
0.03 lx
(0.003 fc)
0.69 lx
(0.064 fc)
0.069 lx
(0.0064 fc)
0.27 lx
(0.026 fc)
0.027 lx
(0.0026 fc)
0.0099 lx
(0.00092 fc)
0.42 lx
(0.042 fc)
0.042 lx
(0.0042 fc)
0.14 lx
(0.014 fc)
0.014 lx
(0.001fc)
0.321 lx
(0.03 fc)
0.032 lx
(0.003 fc)
0.11 lx
(0.01 fc)
0.011 lx
(0.001fc)
Day/Night
Modes
Dynamic range
Signal-to-Noise Ratio
Dynamic engine
Color, Mono, Auto
6 preset programmable modes
120 dB (20-bit image processing)
>50 dB
2X-Dynamic, XF-Dynamic, SmartBLC+2X-Dynamic
SmartBLC
AGC
On (includes 2X-Dynamic ) / Off
AGC On or Off (0 - 30 dB) selectable
White Balance
Shutter
ATW, ATWhold and manual (2500 to 10000K)
Auto (1/50 [1/60] to 1/10000) selectable
Auto (1/50 [1/60] to 1/50000) automatic flickerless, fixed selectable
Adjustable from Off up to 10x Sensitivity up
Auto Black Automatic continuous, Off
Dynamic Noise Reduction Auto, On/off selectable
Sharpness
Peak White Invert
Sharpness enhancement level selectable
On/Off
Privacy Masking
Synchronization
Controls
Four independent areas, fully programmable
Video Motion Analysis Motion+ or IVA
Test Pattern Generator Color bars 100%, Grayscale 11-step, Sawtooth 2H, Checker board, Cross hatch, UV plane
Internal, Line Lock, HV-lock and Genlock
(Burst lock) selectable
OSD with soft-key operation (multi-lingual)
Audio
Standard G.711
Signal-to-noise ratio
300 Hz to 3.4 kHz at 8 kHz sampling rate
> 50 dB www.boschsecurity.com
6 | NDN-498 FlexiDome2X Day/Night IP Cameras
Input/output
Audio 1 x mono line in, 1 x mono line out
• signal line in 9 kohm typical, 5.5 Vpp max
• signal line out 3.0 Vpp at 10 kOhm typical,
2.3 Vpp at 32 Ohm typical,
1.7 Vpp at 16 Ohm typical
Alarm 1 non-isolated closing contact
• activation voltage +5 VDC to +40 VDC
(+3.3 VDC with DC-coupled 22 kOhm pull-up resistor)
Relay
• voltage
1 output
30 VAC or +40 VDC
Maximum 0.5 A continuous, 10VA
Software Control
Unit Configuration
Flicker Control
Software update
Network and Stroage
Protocols
Via web browser or Configuration Manager
50/60 Hz, selectable
Flash ROM, remote programmable
Encryption
Ethernet
PoE SUPPLY
Local Storage
Optical
Varifocal lens
RTP, Telnet, UDP, TCP, IP, HTTP, HTTPS,
FTP, DHCP, IGMP V2/V3, ICMP, ARP, SMTP,
SNTP, SNMP, 802.1x, UPnP
TLS 1.0, SSL, AES (optional)
STP, 10/100 Base-T, auto-sensing, half/full duplex, RJ45
IEEE 802.3af compliant
Supports microSD cards (SDHC)
IR corrected, manual zoom and focus adjustment
Automatic iris control Iris control
Viewing angle
2.8 to 10 mm
9 to 22 mm
Wide 100.8 x 73.7º (H x V)
Tele 28.5º x 21.4º (H x V)
Wide: 31.2º x 22.8º (H x V)
Tele: 12.8º x 9.6º (H x V )
Mechanical
Weight
Mounting
Color
Adjustment range
Dome bubble
Trim ring
0.67 kg (1.48 lb)
+SMB: 1.29 kg (2.84 lb)
Flush mount or surface mount
White (RAL9010) trim ring with black inner liner
360º pan, 90º tilt, ±90º azimuth
Polycarbonate, clear with UV blocking antiscratch coating
Aluminum
Environmental
Operating temperature default (with heater off)
Operating temperature
(with heater on)
Storage temperature
Operating humidity
Storage humidity
Impact protection
Water/dust protection
-20 ºC to +50 ºC (-4 ºF to +122 ºF) cold start
-50 ºC to +50 ºC (-58 ºF to +122 ºF)
-50 ºC to +70 ºC (-58 ºF to +158 ºF)
5% to 93% relative humidity
Up to 98% relative humidity
IEC 60068-2-75 test Eh, 50 J
EN 50102, exceeding IK 10
IP 66 and NEMA‑4X
Ordering Information
Accessories
VDA‑455SMB
Surface mount box, high impact for
VDC-455, VDM-455, VDC-485, VDN-498,
NDC-455 and NDN-498
VDA-WMT-DOME Wall Pendant Mount
Bracket
Wall pendant mount bracket for FlexiDome cameras
VDA-CMT-DOME Corner Mount Bracket
Corner mount bracket for FlexiDome cameras
VDA-PMT-DOME Pendant Pipe Mount
Bracket
Pendant pipe mount bracket for FlexiDome cameras
S1460 Service/Monitor Cable for FlexiDome analog and IP (2.5 mm connector to BNC), 1 m
UPA-2410-60 Power Supply
120 VAC, 60 Hz, 24 VAC, 10 VA Out
UPA-2430-60 Power Supply
120 VAC, 60 Hz, 24 VAC, 30 VA Out
UPA-2450-60 Power Supply
120 VAC, 60 Hz, 24 VAC, 50 VA Out
UPA-2420-50 Power Supply
220 VAC, 50 Hz, 24 VAC, 20 VA Out
UPA-2450-50 Power Supply
220 VAC, 50 Hz, 24 VAC, 50 VA Out
For use with certain 24 VAC camera models.
VDA-455TBL Tinted bubble
Tinted bubble for FlexiDome series
VDA-455CBL Clear bubble
Clear Bubble for FlexiDome series
VDA-455SMB
VDA-WMT-DOME
VDA-CMT-DOME
VDA-PMT-DOME
S1460
UPA-2410-60
UPA-2430-60
UPA-2450-60
UPA-2420-50
UPA-2450-50
VDA-455TBL
VDA-455CBL
Ordering Information
Software Options
MVC-FIVA4-CAM
IVA 4.x VCA software license for IP camera/ dome (e‑license)
MVC-FENC-AES BVIP AES 128 Bit
Encryption
BVIP AES 128‑bit encryption site license.
This license is required only once per installation. It enables encrypted communication between BVIP devices and management stations.
MVC-FIVA4-CAM
MVC-FENC-AES
NDN-498 FlexiDome2X Day/Night IP Cameras | 7 www.boschsecurity.com
8 | NDN-498 FlexiDome2X Day/Night IP Cameras
Americas:
Bosch Security Systems, Inc.
130 Perinton Parkway
Fairport, New York, 14450, USA
Phone: +1 800 289 0096
Fax: +1 585 223 9180 [email protected]
www.boschsecurity.us
Europe, Middle East, Africa:
Bosch Security Systems B.V.
P.O. Box 80002
5600 JB Eindhoven, The Netherlands
Phone: + 31 40 2577 284
Fax: +31 40 2577 330 [email protected]
www.boschsecurity.com
© Bosch Security Systems 011 | Data subject to change without notice
T6870691723 | Cur: en-US, V11, 14 Jul 2011
Asia-Pacific:
Robert Bosch (SEA) Pte Ltd, Security Systems
11 Bishan Street 21
Singapore 573943
Phone: +65 6258 5511
Fax: +65 6571 2698 [email protected]
www.boschsecurity.asia
Represented by
advertisement
Related manuals
advertisement