inVue LTO1550 Instruction Manual
Add to My manuals7 Pages
inVue LTO1550 is a high-security tablet protection system designed to safeguard your valuable devices on display. With its robust alarm system, it effectively deters theft attempts by sounding an alarm when unauthorized removal is detected. The LTO1550 seamlessly integrates with InVue power supplies, allowing you to power your merchandise while maintaining top-notch security.
advertisement
![inVue LTO1550 Instruction Manual | Manualzz inVue LTO1550 Instruction Manual | Manualzz](http://s3.manualzz.com/store/data/060026466_1-4d0cc6f719d4fc3a1282d31991626b66-360x466.png)
LTO III
Tablet Security
LTO1550
Read entire instruction guide before starting installation.
System Components
1. Laptop & Tablet Security
2. IR Key (not included)
3. Power connector
(if powering up merchandise, order separately)
4. InVue or OEM Power Supply (if powering up merchandise, order separately)
System Overview
The LTO III Laptop Security protects all tablets.
Tablet Security
LTO1550
2
Power Supply
Power Connector
InVue IR Key
AF4400 or PK4400
3
4
1 Wipe display counter and tablet with alcohol wipe provided. Let it dry completely.
2 Remove white tab to activate battery. If powering merchandise: Plug power connector into alarm module. Snap cover onto alarm module. Push down on cover until you hear a “click.”
FOR EXTERNAL
KEEP OUT OF R lcohol
S:
One pad satu rated in
75%
USE ONLY
EACH OF
AND FIRE
EYES
Apply topically as
mounting area
.
5
6
3 Remove clear film from adhesive on alarm module.
Plug power connector into merchandise. Confirm LTO cord is towards top of merchandise. Center LTO alarm module on back of merchandise and press firmly for at least 10 seconds.
4 Adhesive mount fuse of tablet security to display counter. Remove clear film from base of tablet security.
Place on display counter and press firmly for at least 10 seconds.
Confirm LTO cord is towards top of merchandise.
7
8
5 Plug InVue power supply or OEM power suppy to tablet security. Plug power supply into outlet.
Arm/Disarm LTO
Place key on lens of LTO.
Press button on key once to arm or disarm alarm.
9
Re-merchandising – Removing Cover
Squeeze both sides of cover and lift up to remove cover.
Re-merchandising – Removing Alarm Unit
To change tablet position on display (shown below):
Remove both screws with screwdriver to remove alarm unit.
To completely remove position on display: Use removal tool
(MP254 - not shown).
10 11
SD0183 Rev1 01/10/14 www.invuesecurity.com
Corporate Office (North America) // 704.752.6513 • 888.55.INVUE
Europe, Middle East & Africa // +31.23.8900150
Asia Pacific // +852.3127.6811
Latin America // +52.55.90003957
© 2014 InVue Security Products Inc. All rights reserved.
InVue is a registered trademark of InVue Security Products.
advertisement
Related manuals
advertisement