E30 | E33
D R I F T W O O D
LOG SET INSTALLATION GUIDE
Important
The placement of the logs is not arbitrary. If they are positioned incorrectly, the flames can be impinged and will not burn correctly. NOTE: The logs are fragile and should be handled gently. Ensure you have all the elements shown below.
Log #1 Log #4
Log #2
Log #3
Log #5
Rocks
Step 1
Follow instructions in your owners manual to install liners and burner media.
Step 2
Place Log #1 in the back towards the back liner panel as shown with both dowels facing up.
Step 3
Using a dowel on Log #1 position Log #2 as shown.
Log #2
Log #1
Step 4
Using the remaining dowel on
Log #1 position Log #3 across from Log #2 as shown.
Log #3
15
7
6 4
19
Step 5
At this stage you can distribute the numbered rocks in the pattern demonstrated above.
Step 6
Place Log #4 at the front of the firebox touching Log #3.
Log #4
Step 7
Place Log #5 at the front of the firebox touching Log #2.
Your log set is now complete.
Log #5
Visit www.enviro.com/mobile/DriftwoodLSG.html
or scan the provided
QR code to watch an easy to follow step-by-step video guide on setting up your new Enviro Driftwood log set.
enviro.com
C-15115