Zagg Basic 7in, Basic 9in Manual
Zagg Basic 7in is a Bluetooth keyboard compatible with most Bluetooth-enabled devices. It features a compact design for easy portability, a built-in rechargeable battery, and a variety of function keys for convenient control. Connect it to your devices like tablets or smartphones via Bluetooth and enjoy comfortable typing with its responsive keys.
Advertisement
Advertisement
Revision
01
02
Date
05/04/2014
05/24/2015
Initial Release
Updated Release
Notes
Basic 7in and 9in
Bluetooth Keyboard
Revision History
Released By
Owen Carlson
Owen Carlson
Table of Contents
1. General Specification ............................................................................................................................... 6
2. Mechanical Specification ......................................................................................................................... 8
2.1. Characteristics of Material ................................................................................................................... 8
2.2. Packed – Including Packaging............................................................................................................... 8
2.3. Detachability of Cable Pull Out ............................................................................................................ 9
2.4. Key module configuration .................................................................................................................... 9
2.5. Key Board Specification ..................................................................................................................... 10
2.6. Life Test ............................................................................................................................................. 10
2.7. Specification of Rubber Switch .......................................................................................................... 10
2.8. Max Keycap Depressing Force............................................................................................................ 11
2.9. Keyboard Height ................................................................................................................................ 11
2.10.Keycap Strength ............................................................................................................................... 11
2.11.Keycap Spacing and Alignment ......................................................................................................... 11
2.12.Key in Test Spec On The 4 Corners Of The Key Cap ........................................................................... 12
2.13.Characteristics of Switches ............................................................................................................... 12
2.14.Slide Switch ...................................................................................................................................... 12
2.15.Tact Switch ...................................................................................................................................... 13
2.16.Sleep Magnet Function .................................................................................................................... 13
2.17.Snap force and life test .................................................................................................................... 13
3. Electrical Specification ........................................................................................................................... 13
3.1. Electrical Characteristics .................................................................................................................... 13
3.2. Feature: ............................................................................................................................................. 13
3.3. Power Rating ..................................................................................................................................... 13
3.4. LED Indicator behavior....................................................................................................................... 14
3.5. RF Specifications ................................................................................................................................ 15
3.6. Bluetooth Module Block Diagram ...................................................................................................... 16
3.7. Sleep mode ....................................................................................................................................... 17
3.8. Keyboard layout ................................................................................................................................ 17
3.9. 7 Inch Key frame ................................................................................................................................ 17
3.10. .............................................................................................................. Fn Combination Key Function
Descriptions ...................................................................................................................................... 19
3.10.1. 7in Non backlight Alcatel Android 5.0 US ..................................... Error! Bookmark not defined.
3.10.2. 7in Non backlite LG E8 Android 5.0 US ........................................ Error! Bookmark not defined.
3.11.Bluetooth 3.0 9 inch Keyboard Key Matrix for Apple ........................................................................ 20
3.12.Schematic Circuit ............................................................................................................................. 21
3.13.Pseudo N-Key Rollover Capability ..................................................................................................... 22
3.14.Free From Illegal Ghost key .............................................................................................................. 22
3.15.Compatibility ................................................................................................................................... 22
3.16.Charging Specification ...................................................................................................................... 22
3.17.Keyboard Module ............................................................................................................................ 22
3.18.Key Functional Test .......................................................................................................................... 22
3.19.Bluetooth RF Power & Frequency Test ............................................................................................. 22
3.20.EMI Test ........................................................................................................................................... 22
3.21.ESD TEST .......................................................................................................................................... 23
3.22.EFT Test ........................................................................................................................................... 23
4. Environmental and Reliability Specifications .......................................................................................... 24
4.1. Acoustic Noise ................................................................................................................................... 24
4.2. Temperature and Humidity Test ........................................................................................................ 24
4.3. Heat Treatment Impact Test .............................................................................................................. 25
4.4. Vibration Test .................................................................................................................................... 25
4.5. Bare Unit Drop Test ........................................................................................................................... 26
4.6. Packaged Box Drop Test .................................................................................................................... 26
4.7. Life Test ............................................................................................................................................. 27
4.8. UV Test .............................................................................................................................................. 27
4.9. Spillage Test ...................................................................................................................................... 28
4.10.Endurance Test ................................................................................................................................ 29
4.11.Physical / Software compatibility check ............................................................................................ 30
4.12.PLP – Product Liability Program ....................................................................................................... 30
4.13.Abrasion Test – Legend (1X key silk-screen printing) ......................................................................... 30
4.14.Abrasion Test - Logo/ Icon ................................................................................................................ 31
4.15.Abrasion Test – Painting (Outlook parts printing) ............................................................................. 31
4.16.Chemical Resistance Test ................................................................................................................. 31
4.17.Adhesion Test .................................................................................................................................. 31
4.18.Keycap Texture Endurance Test........................................................................................................ 32
4.19.Compression Test-Type 1A ............................................................................................................... 32
4.20.Corrugated Box (Carton) Compression Test ...................................................................................... 32
4.21.Compliance ...................................................................................................................................... 32
4.22.Safety Standard ................................................................................................................................ 33
4.23.Environment Specification Items ...................................................................................................... 33
4.24.Appearance Specification ................................................................................................................. 34
5. Patent ................................................................................................................................................... 34
6. View Angle ............................................................................................................................................ 34
6.1. Angle Specifications ........................................................................................................................... 34
7. Keyboard Layout for different Languages .............................................................................................. 35
7.1. 7in Non backlight Alcatel Android 5.0 US ................................................ Error! Bookmark not defined.
7.2. 7in Non backlite LG E8 Android 5.0 US .................................................... Error! Bookmark not defined.
8. Cable ..................................................................................................................................................... 35
8.1. Micro USB Charge Cable .................................................................................................................... 35
1.
General Specification
This specification is applied to the Bluetooth wireless keyboard folio for Windows iPad series.
General Product Information
Product Type
Connection Type
Keypad Features
Wireless Protocol
Wireless Range
Software Support (at release)
OS Support (at release)
Indicator Lights (LED)
Backlight
Battery Details
Battery Life
Power Charge
Power On Function
Hinge Angle
Closed Mode
Book Mode
ZAGG Folio Keyboard
Bluetooth Wireless
Slim
Bluetooth 3.0
10M
As needed per device
As needed per device
Under Caps Lock, Under Power (for Pairing too)
None
450mAh, 3.7V
365 days one hour per day use
Micro USB cable ( TPE coated cable)
Power key on key frame will power on
0~135 +/- 3 Degrees
Hinge Life 5000 cycles on opening and closing
Hinge Torque N/A
Opening Force (Free Stop) N/A
Magnet assist closure and retention
Magnet assist retention
Product Dimensions
Product component
Keyboard
Width
( No Fabric)
246 mm
Depth
(No Fabric)
178.5 mm
Height
(Tablet
Dependent)
6.2mm
Weight
XXX grams
2.
Mechanical Specification
2.1.
Characteristics of Material
Parts
Bezel, Key Surround
Material Color
PC/ABS
(70/30)
Texture
White/Black/
Purple and as MT11010 needed
ABS White/Black Texture MT 11005 Semi-Gloss Paint Keys, HF-3201GS
Fabric Cover, Interior
Fabric Cover, Exterior
Side Hooks
Cradle
Base
Top Hooks
V type hook
Cradle Slim
Bottom Board
Synthetic
Suede
Weave/
Knit
PC
PC
PC
PC
Black
Black/
Purple/ Red
White/Black/
Purple etc
White/Black/
Purple etc
White/Black/
Purple etc
White/Black/
Purple etc
TBD
TBD
TBD
TBD
TBD
TBD
PC Black TBD
PC
PC
Black
Black
TBD
TBD
Cradle Slim Cover PC Black TBD
2.2.
Packed – Including Packaging
Product Dimensions Tolerance: +/- 3 mm
Package Spec.
Gift box with handle
Qty Width
1 TBD
Length
TBD
Carton (Inner)
Carton (Outer)
5
10
TBD
TBD
TBD
TBD
Height
TBD
TBD
TBD
Weight
TBD
TBD
TBD
2.3.
Detachability of Cable Pull Out
The cable entrance for corded devices can meet product specification. Function test will be performed before and after this test. Refer to the definition of related standard.
USB Implementers Forum. 2007-01-04. Micro USB connector mating force is less than 30N, un-mating force is 8+/-1N. Life test is 5000 cycles in this device.
2.4.
Key module configuration
This specification is applied to the 7” key module.
General Product Information
Product Type Key module
Output Pin
Travel
28 Pin
1.5 mm
Total Height
Weight
Size
Click Ratio
Indicator Lights (LED)
3.9 mm
N/A
198.4 X 96.5 mm (main rectangular foot-print)
35 ~ 55
RGB
Key life Standard key and long key: 3 M, Small key: 5 M
Define by Customer
Define by Customer
Color
Key layout
Name
Key Cap
Scissor EXT
Scissor INT
Rubber Dome
Plate
Membrane
Material
ABS
POM
POM
Rubber
0.3 SECC
PET
Flaming
94 HB
94 HB
94 HB
94 HB
5VA
94 HB
UL
2.5.
Key Board Specification
2.6.
Life Test
Standard key is 5 million cycles and Function key is 3 million cycles.
( 4 times/second, 100 ± 20 gf ).
2.7.
Specification of Rubber Switch
Normal And Function Key Rubber Dome Key Characteristic
Point
P1
P2
P3
P4
Pre-Loading
Click ratio:
Stroke
0.5 ± 0.2 mm
0.8 ± 0.2mm
1.5 ± 0.2 mm
0 ~ 0.2 mm
35 – 55 %
Force
60 ± 15 gf
15~48 gf
Maximum 120 gf
Maximum 15 gf
P3
P1
P2
Figure 1 Standard key curve of force response
Travel
Operating Travel: 1.5±0.30mm
Full Travel: 1.5±0.30mm (force at 110g)
Keycap Pull Off Force
500gf minimums with equal load applied to all 4 corners of the keycap
150gf minimums at any one corner or side of a given keycap
2.8.
Max Keycap Depressing Force
To act on the center of the keycap with stand 5Kgf force for 1 minute.
2.9.
Keyboard Height
3.90
± 0.20mm
（ normal key ）
3.90
± 0.20mm
（ space bar)
2.10.
Keycap Strength
To act at “X” and “Y” axis with stand 1Kgf force for 5 sec.
2.11.
Keycap Spacing and Alignment
Clearance between keycaps (standard keycaps): Δ H ( Δ V) -- ± 0.30 mm
Alignment (keycap to keycap): Neighbor 0.4 mm max, In a row 0.4 mm max
Height alignment (keycap to keycap): Neighbor 0.4 mm max In a row 0.4 mm max
Key slant (keycap to keycap): 0.6 mm max
Key X, Y Movement: Shall be ≦ 0.5mm for full amplitude on both X and y directions.
Key twisting: Normal key ± 0.4mm
Fn Key ± 0.3mm
Space key ±0.4mm
Long Key ±0.4mm
2.12.
Key in Test Spec On The 4 Corners Of The Key Cap
Unit: mm (All Types)
A.
Standard Key
B.
Space Bar
C.
Long Types Key
D.
Small Key
Key in Force (Center) ≥ 80g
2.13.
Characteristics of Switches
2.13.1.
Slide Switch
No slide switch
2.13.2.
Tact Switch
No tact switch
2.14.
Sleep Magnet Function
Act magnet switch in 1.1mm height from top surface of KB cover.
2.15.
Snap force and life test
Snap in force between tablet and keyboard cover is (TBD)15N +/- 20% in handle and snap out force is
(TBD)25N +/- 20%.
Snap life is (TBD) 5,000 times.
3.
Electrical Specification
3.1.
Electrical Characteristics
3.2.
Feature:
Bluetooth V 3.0 specification.
Bluetooth HID profile V 1.1 compliant.
Frequency Range: 2.400G ~ 2.480GHz
Peak Power consumption: 0.66 mA Max
Built-in 3.7V, 450mAh Li-Polymer Battery, can be rechargeable.
Sleep mode Power consumption: 0.033 mA Max
Security Encryption: 64 bits
Support AFH (Adaptive Frequency Hopping).
Support Language: US, Europe, Asia
Compatibility with necessary OS
FCC, CE, BQB, R&TTE, RoHS
Active Range: around 10 meter
Build-in Power on/off Switch.
RGB LED indicators for Battery Low alert , Recharge and Bluetooth Connectivity
Debounce: No double characters
Key buffering: 2 seconds
Wakup Time: 1.9 seconds
Auto-pair Requirement: 1.5 seconds
BQB Requirement: 10m or 30ft
3.3.
Power Rating
1
2
Items
Operation Voltage:
Specifications
Voltage supplied to device: 3.0VDC ~ 4.2VDC
Active Power consumption 0.65mA Avg
Commented [OC1]:
3
4
5
Standby Mode current
Hibernation mode current
Bluetooth disconnect
0.25mA Avg
0.033mA Avg
Bluetooth keyboard will disconnect communication after 20 minutes. The keyboard will always stay paired so when coming out of hibernation it will automatically allow keyboard to work with tablet with limited time delay.
3.4.
LED Indicator behavior
Press Fn + Right Control Key will indicate battery status by LEDs.
Battery status description:
Battery Voltage
3.71V ~ 4.2V
3.5V ~ 3.71V
3.4V ~ 3.5V
Battery
Level
Full
Remark
Flash 3 times. Each time flash 1 sec, stop 1 sec.
Flash 3 times. Each time flash 1 sec, stop 1 sec.
Flash 3 times. Each time flash 1 sec, stop 1 sec.
Flash 3 times. Each time flash 1 sec, stop 1 sec.
3.0V ~ 3.4V 0% ~ 11% Critical
Power On, Charging, & Pairing:
Function
Power On
LED Colour
Green LED under power key
Power Off
Charging
Red LED under power key
Red
Remark
The GREEN LED will turn ON instantly when power key is pressed. The LED will turn ON for 2 seconds then turn OFF and the keyboard will automatically reconnect with the tablet. If pressed again GREEN LED will turn on 2 seconds then off indicating it is still ON.
The RED LED will blink twice then turn OFF indicating the keyboard is OFF when the power key is pressed and held down for 3 second.
When power is turned OFF the keyboard with disconnect BT.
RED LED stay ON until Battery cell is full Charged.
Low power
Percentage
50% ~ 100%
25% ~ 49%
12% ~ 24%
Low
Charge
Red LED under power key
Red LED under power key
LED Colour
Green
Yellow
Red
When battery reaches a Charge level (12%~24%) the back lightning will be disabled and when
Bluetooth Pairing Blue LED under power key
Critical Level is achieved (0%~11%) a RED LED will flash three times, one flash sequence every 5 minute. (1 Hz Flash 50% Duty)
Push and hold Pairing key for 3 seconds for pairing. A BLUE LED under power key will Flash when pairing. Flash will stop flashing when paired. Pairing times out after 60 sec.
Caps Lock:
Function
Caps Lock ON
LED Colour
Blue LED under
Caps Lock Key
Remark
LED Stay on until key is pressed again
Tablet Bluetooth Display
Function
Display in Bluetooth settings
Name Remark
ZAGG Basic Folio Zagg Basic will show in the display of Bluetooth devices the tablet detects
Note: Now the turning ON and OFF of the keyboard through the key frame is really only toggling between Hibernation Mode and Active Mode and disconnecting Bluetooth connection when in Hibernation Mode.
To perform a HARD RESET, a micro USB cable needs to be plugged into a 5V power source and then plugged into the keyboard. A GREEN LED under the power key will come on for 2 seconds then changes to RED indicating the PCBA has been reset.
For all flashing of LED’s a flash cycle time 1 Hz Flash 50% Cycle will be used.
3.5.
RF Specifications
Simple data transmitter operation at 2.4GHz range
Modulation:
Caps Lock ON:
Voltage (Supply):
Transmitter Output Power:
Receiver Sensitivity:
Range:
Auto paring:
FHSS
Blue light
3.0V
2.66 dBm
- 86.14 dBm
>= 10m (in no interference environment)
Device starts auto pairing mode after power on, and leaves after 60 seconds.
RF IC Model for keyboard: Broadcom BT3GMD-B47P is a Bluetooth Human Interface Device
(HID) module based on the Broadcom BCM20730 Bluetooth 3.0 specification basic rate-compliant stand baseband processor with an integrated 2.4GHz transceiver or equivalent performance chip.
3.6.
Bluetooth Module Block Diagram
3.7.
Sleep mode
Auto sleep if no typing for 20 minutes.
3.8.
Keyboard layout
3.8.1.
7 Inch Key frame
3.8.1.1.
7in Non backlit Key Frame US Apple Layout
3.8.2.
9 Inch Key frame
3.8.2.1.
9in Non backlit Key Frame US Apple Layout
3.9.
Fn Combination Key Function Descriptions
01
Item # Keystroke
01 Fn +
Description
Battery Level
02 03
01
Item # Keystroke
01 Fn +
02
03
Fn +
Fn +
3.10.
Description
Battery Level
Search
Show / Hide Keyboard
Bluetooth 3.0 9 inch Keyboard Key Matrix for Apple
3.11.
Schematic Circuit
3.12.
Pseudo N-Key Rollover Capability
‘N’ key roller is the numbers of keys that may be held depressed simultaneously and have the keyboard generate the appropriate code for each pressed and released key without keyboard interruption. The keyboard is capable of at least a pseudo 6-key rollover. All combinations of
Ctrl, Alt and Shift keys are not ghost keys.
3.13.
Free From Illegal Ghost key
Key matrix layout has been properly managed such that no ghost key occurs for any 3-key combination. The ghost key is defined as 3-key combination where a valid third key falls in the
‘#’ pattern in the key matrix, formed by the proceeding valid 2-key combination. Normally in this case, the third key will be masked without sending any code because the third key and fourth key in this ‘#’ pattern are confusing the microprocessor of three keyboard.
3.14.
Compatibility
Operation System: Windows OS
Bluetooth 3.0 LE specification compliant.
Bluetooth HID profile V 1.1 compliant
VID/PID in firmware is 0a5c/8502 (Default Broadcom)
3.15.
Charging Specification
Charging current: 180mA
3.16.
Keyboard Module
Key matrix traces with switch contact fingers are laid out and routed on a 3 layers membrane sheet and scissor keycap as a key module. The contact resistance is less than 1000 ohm.
3.17.
Key Functional Test
Refer to Key Layout and to use Bluetooth test program & fixture.
3.18.
Bluetooth RF Power & Frequency Test
RF Power Range: -35dBm ~ -5 dBm
Frequency tolerance: +/- 75 KHz
Low Frequency: 2402 MHz
Middle Frequency: 2441 MHz
High Frequency: 2448 MHz
3.19.
EMI Test
European Standard EN 55022: 2006 Class B.
FCC/CFR 47 : Part 15 Class B
Frequency Range of Test: from 30MHz to 1000 MHz
3.20.
ESD TEST
Basic standard: IEC 61000-4-2
Generic standard: EN 55024:1998 + A1:2001 + A2:2003
Performance Criteria: B
Level: 2 for Contact discharge
Tested Voltage: ± 8V for Air discharge, ± 4 KV for Contact discharge
Temperature: 15-23 ºC
Relative Humidity: 30-60 % RH
Test Condition : Air ±8Kv, ±15Kv ESD
Judgment Standard: o ±8Kv No malfunction o ±15Kv No deviation or destruction of component
3.21.
EFT Test
Basic standard: IEC 61000-4-4
Generic standard: EN 50 082-1
Performance Criteria: B
Level: on Power Supply 3
Test Voltage: on Power Supply ± 1 KV
Temperature:15-35ºC
Relative Humidity: 30-60 % RH
4.
Environmental and Reliability Specifications
4.1.
Acoustic Noise
Test Item
Acoustic noise
Specification
Keyboard : Normal key
Max: 50dBA,
Space bar: Max:55dBA
Mouse: Max:55dBA
A = 38 +/- 13mm
B = 750 +/-13mm
C = 260 +/-13mm
D = 330 +/-13mm
D
Sound level meter: Point microphone toward the center-line of the spacebar on keyboard.
C
B
A
4.2.
Temperature and Humidity Test
Test Equipment
Test Item
High Temp
High Humidity
Test
Storing in Low
Temperature
Specification
1.
Sample size: 5 pieces
2.
Test Condition: 50°C /95%, 120 hours
3.
Judgment Standard:
No malfunction
No decay inside of the product
1.
Sample size: 5 pieces
2.
Test Condition: -20°C, 96 hours
3.
Judgment Standard:
- No malfunction
Test Equipment
Chamber
Chamber
4.3.
Heat Treatment Impact Test
Test Item
Heat Treatment
Impact Test
Specification
1.
Sample size: 5 pieces
2.
Test Condition: -40°C ~ 85°C, 2 hours /cycle,
30cycle
3.
Judgment Standard:
No malfunction
No decay or color change of PBA Soldering
& component
No crack, dent, or change
Test Equipment
Chamber
4.4.
Vibration Test
Test Item
Vibration
Specification Test Equipment
1.
Sample size: 5 pieces
2.
Condition: Sine sweep: 10HZ~ 500HZ~ 10HZ;
3.
Sweep speed: 0.5 Octave/minute
4.
Acceleration: 2G
5.
Duration: 30 minutes per face.
6.
Judgment Standard: i) The mechanical appearance and inner structure should not be damaged after test. ii) No functional failure should be found during and after the test.
Vibration machine
4.5.
Bare Unit Drop Test
Test Item
Bare unit drop test
Specification
1.
Sample size: 2 pieces
2.
Test Condition : Drop at 91.44 cm ( 36in ) on wood surface, 5 times on each face and 5 times on the top and bottom ( Total 30 times without device) NAC and Mahindra Testing
3.
Judgment Standard
I.
No malfunction (button, mechanical or electrical)
II.
No deviation or destruction of component
(No major cracks in plastic housing)
Test Equipment
Drop machine
4.6.
Packaged Box Drop Test
Test Item Specification Test Equipment
Master Carton packaged box drop test
10 drops (One corner, Three edges, Six surfaces ) from Drop test machine
36 inches (91.44cm) to concrete surface, No damage product, Product function OK
4.7.
Life Test
Test Item
Keycap
On/Off Button
Pairing Button
Snap Life Test
Hinge Cycle Test
Specification
Spec: Keyboard normal keys: 5 M cycles
Function key: 3 M cycles
N/A On Key Frame
Test Equipment
Life tester machine
N/A On Key Frame
Magnetic force between tablet and keyboard is snap in force 6N +/- 20% and snap out force is 6.5N +/-
20%. Snap life is 5,000 times
1.
Judgment Standard
No Cracks
Still connects and hold tablet and
Test by Hand or Machine tablet and torque of hinge cannot change.
4.8.
UV Test
Test Item
UV Test
Specification
1.
Test Standard: ISO4892-3:2006; Method B, 72
Hrs; 0.76 Watts per square meter at 340 nm wavelength, Ambient temperature of 50°C
3°C, Lamp type 1B (UVA-340), Humidity is not controlled.
2.
Judgment Standard
No crack / dent / color change and ETC.
Test Equipment
4.9.
Spillage Test
Test Item Specification Test Equipment
Spillage test Unit shall be ON.
The keyboard shall be functional after performing the liquid spill tests:
Pour the liquid from a funneled system from a height of 3.0" above the keyboard over between the G, B, and
H keys. The funnel should accurately dispense all the liquid at a rate of approximately 4 Oz (116 cc) per minute of elapsed time. The Keyboard shall remain idle for 60 seconds and then the keyboard shall be tilted to drain the liquid. Liquid for test:
(1) 8.0 fluid oz. of hot coffee mixture (65C±5C)
(Coffee mixture shall be prepared by adding 4.0 gm. of sugar and 2.0 gm. of non-dairy creamer to an 8.0 oz. cup of hot coffee.).
(2) 1.0 fluid oz. of cold sugared Cola (15C ±5C)
(3) 350cc of water (24±2°C):Don’t shake keyboard after complete spilling water, Pour out water.
Pass Criteria
All keys on the keyboard are functional
Liquid effectively drains from the specific keyboard liquid drain hole(s) Fail Criteria
Liquid does not pass through keyboard and into the drain hole(s) and out the bottom of the keyboard
Spontaneous characters appearing on the screen.
Repeating keys (a repeating key is a key cap that is depressed and release once but continues to scroll the character more than once)
Non-Functioning keys
4.10.
Test Item
Endurance Test
Specification Test Equipment
Endurance test
Hinge endurance: There shall be no damage, when a load of 25N is applied in pressure direction for 15 seconds.
Rubber pad endurance: Rubber pad does not peel off when a load of 10N is applied on its surface.
Breakage test (25N force applied to top of case.)
Pull gauge.
4.11.
Physical / Software compatibility check
Test Item Specification
Physical / Software Physical / Software Compatibility Test compatibility check
Test Equipment
Window Surface Tablet
4.12.
Test Item
PLP
PLP – Product Liability Program
Specification
Electronic, Physical PL review, Manual/Package safe clause review
Test Equipment
4.13.
Test Item
Abrasion Test – Legend (1X key silk-screen printing)
Specification Test Equipment
Abrasion testlegend
1,250 cycles, 450g , CS-10F eraser, 50% legend line width missing or damaged
Fixture
4.14.
Abrasion Test - Logo/ Icon
Test Item
Abrasion test-
Logo/Icon
Specification
200 cycles, 450g, CS-10F , 50% legend line width missing or damaged
Test Equipment
Fixture
4.15.
Abrasion Test – Painting (Outlook parts printing)
Test Item
Abrasion testpainting
Specification Test Equipment
500 cycles, 1 kg, CS-10 abrasive wheel, substrate is first Abrasion machine visible through the painted surface.
4.16.
Chemical Resistance Test
Test Item Specification
Chemical resistance Supplier product spec. 12 chemicals per unit, room test temperature exposure followed by 60°C/65% RH, 12 chemicals are Oil of Olay; Vaseline with 6.5% Alpha hydroxyl ; Jergen’s Lotion; Eternity Body Lotion;
Perfume; 99% Isopropyl Alcohol; 409 Spray Cleaner;
Ammonia (Windex); Vegetable Oil, Artificial sweat;
Coffee and Coke.
Test Equipment
4.17.
Adhesion Test
Test Item
Adhesion test
Specification
Per ASTM D-3359. must not exhibit paint flaking, peeling, or degradation
Test Equipment
4.18.
Test Item
Keycap texture endurance test
Keycap Texture Endurance Test
Specification Test Equipment
250,000 cycles, 200gm, CS-5 wear eraser, no visual change to surface finish
Abrasion test machine
4.19.
Compression Test-Type 1A
Test Item
Compression
Test-Type 1A
Specification
Test 1Min load
L = M x Jx(H-h)/ h x F
Test Equipment
Compression test machine
4.20.
Test Item
Corrugated Box (Carton) Compression Test
Corrugated box
(Carton) compression test
Specification
Minimum compression strength = ((BW x N)
+ EPW)) x SF
BW = Individual Box Weight
N = number of boxes in a column above the bottom box
EPW = Empty Pallet Weight
SF = Safety Factor = 5
Test Equipment
Compression test machine
4.21.
Items
1 USB
Compliance
Specifications
Compliance of USB compliance program
4.22.
Items
Safety Standard
Specifications
1 Regulation
(Safety/EMC)
Safety / EMC Country
CE
FCC
RoHS
UL
UN38.3
CEC
WERC
Bluetooth SIG
Bluetooth Qualification
Body
MSDS
WEEE
NAC or Mahindra
U.S.A
U.S.A
U.S.A
U.S.A
U.S.A
U.S.A
U.S.A
U.S.A
California
U.S.A
U.S.A
U.S.A
Standard
EN301489, EN300328, IEC 60950-1
FCC Part15 Subpart B / C, Class B
Folio
On Battery
On Battery
CEC-400 Battery
Battery
Bluetooth Module
PCBA
Battery
ALL Electrical (Mainly Euro)
Complete Folio (ZAGG Performs)
4.23.
Environment Specification Items
Items
1 Compliance to law regulation/ public standards
Specifications
To be reflected in Product safety (environment) evaluation list To clarify the regulations to correspond to “Law/regulation control standard (product)” appendix “Regulation compliance list” and attach to product planning document or/and product specification document.
2
3
Environmental label
To be reflected in environmental label check sheet
Destination If compliance is required or
Subject
WW
Europe
Compliance to customer’s internal regulation etc. other than above not
□ Main unit
<Place to show logo>
■
□Required ■
Main unit
Not required
Name
International Energy
Star program
RoHS
4.24.
Appearance Specification
Appearance specification: Refer to SIP standard.
Corrosively: It is not seen the rust part to the appearance part. (Edge of sheet metal is included.)
5.
Patent
Items
1 General
6.
View Angle
Angle is 133 +- 3 from the table
Requirement
There is no infringing of other company patent in worldwide.
6.1.
Angle Specifications
Opening angle of folio
133 degree
Viewing angle is infinitely variable but must be balanced at 133 degrees from flat surface.
7.
Keyboard Layout for different Languages
8.
Cable
8.1.
Micro USB Charge Cable
FCC WARNING
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
NOTE 1: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Download
Public link updated
The public link to your chat has been updated. You may view and manage your chat links after registration here.
Document public link
Advertisement
