OIL FILLED RADIATOR

Safety & Operating Instructions

Model # OR 9.20

OR 13.25

READ ALL INSTRUCTIONS BEFORE USING THIS

HEATER, AND FOLLOW THESE INSTRUCTIONS.

Be sure to save this booklet for future reference.

WARNING!

To reduce the risk of fire, electric shock, or personal injury, read all the instructions before using this heater.

--SAVE THESE INSTRUCTIONS--

IMPORTANT INSTRUCTIONS

Basic safety precautions should always be followed when using electrical products, especially when children are present.

WARNING: TO AVOID THE RISK OF ELECTRICAL SHOCK, ALWAYS MAKE

SURE THE PRODUCT IS UNPLUGGED FROM THE ELECTRICAL OUTLET

BEFORE RELOCATING, SERVICING, OR CLEANING IT.

• Read all instructions before using this heater.

• This product is intended for indoor, non-commercial, non-industrial, household use only. Do not use outdoors.

• Do not use the product for any other purpose.

• Never leave this product unattended while it is in use. Always turn the product to the

“OFF” position and unplug it from the electrical outlet when it is not in use.

• Extreme caution is necessary when this heater is used by or near children or invalids and whenever the heater is left operating and unattended . Keep the product out of the reach of children and pets. This product is not intended to use by children.

• Do not use the product while sleeping or place it near a person who is sleeping.

• Place the product on a flat, steady, stable, heat-resistant surface.

• Do not place the product on or near surfaces that may be damaged by heat (i.e., delicate rugs, wall paper, floor coverings not made of heat-resistant material, etc.).

• Do not place this product near flammable materials, surfaces or substances (i.e., curtains, draperies, walls, gasoline, paint, flammable liquids, etc.), as there may be a risk of fire.

• Use the product in a well-ventilated area. .

• This heater is hot when in use. To avoid burns, do not let bare skin touch hot surfaces. If provided, use handles when moving this heater. Keep combustible materials, such as furniture, pillows, bedding, papers, clothes, and curtains at least 3 feet (0.9m) from the front of the heater and keep them away from the sides and rear.

• A heater has hot and arcing or sparking parts inside.

• Use this heater only as described in this manual. Any other use not recommended by the manufacturer may cause fire, electric shock, or injury to persons.

• Always maintain your distance from the product while it is use to avoid serious burns and personal injury

• Never insert fingers, hair, metallic objects or any other item into the vents and openings of the product, as an electrocution, fire, and/or burn hazard exists.

• Do not insert or place flammable materials (i.e., paper, plastic, or cardboard) in, on or near the product.

• Never block the air openings of the product or place it on a soft surface (i.e., a bed or a couch) where the air openings may be blocked. Wipe the air openings clean if they become clogged.

• Do not use this product to dry or heat clothing, shoes, pipes, or any other item.

--SAVE THESE INSTRUCTIONS--

• Do not place or expose this product to water or other liquids.

• This heater is not intended for use in bathrooms, laundry areas, and similar indoor locations. Do not use this heater in the immediate surroundings of a bath, a shower or a swimming pool.

• Do not touch hot surfaces. Always use the handle of the product. Use protective oven mitts or gloves to avoid burns or serious personal injury.

• Do not move the product when it is heated. Allow the product to thoroughly cool before handling it.

• Do not run cord under carpeting and do not cover cord with throw rugs, runners or the like. Arrange cord away from traffic area and where it will not be tripped over.

• To disconnect the product, turn the controls to the “OFF” position, then remove the plug from the electrical outlet. Disconnect the plug (do not pull on the Power Cord) from the electrical outlet.

• Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause an electric shock, fire, or damage to the heater.

• Do not use attachments not recommended or sold by the product manufacturer, as a risk of fire, electrical shock, or serious personal injury may result.

• Attachments, when furnished, may become hot during use. Allow any attachments to cool before handling them.

• To prevent a possible fire, do not block air intakes or exhaust openings in any manner.

Do not use on soft surfaces, like a bed, where openings may become blocked.

• To avoid a circuit overload when using this product, do not operate another highwattage product on the same electrical circuit.

• Avoid the use of an extension cord because the extension cord may overheat and cause a risk of fire.

• Do not allow the Power Cord to hang (i.e., over the edge of a table or counter) or place/run the Power Cord under rugs or in high-traffic areas where it may be tripped over or pulled.

• Do not put any stress on the Power Cord where it connects to the product, as the

Power Cord could fray and break.

• Do not plug or unplug the product from the electrical outlet with a wet hand.

• Keep the Power Cord and product away from heated surfaces.

• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.

• WARNING: In order to avoid overheating, do not cover the heater.

• The heater must not be located immediately below a socket-outlet.

• This heater is filled with a precise quantity of special oil. Repairs requiring opening of the oil container are only to be made by the manufacturer or his service agent who should be contacted if there is an oil leak.

• When scrapping the heater, follow the regulations concerning the disposal of oil.

--SAVE THESE INSTRUCTIONS--

Parts Identification:

Castor Wheel Assembly

Description Drawing Quantity

Wing Nut

Foot

Bracket

1. Castor Wheels 2. Power Switch 3. Thermostat Knob 4. Carry Handle

5. Front Cover 6. Radiator Fins 7. Cord Storage

4

2

2

Model No. OR 9.20

Power Rating 230V~ 50 Hz

Wattage 2000W

SPECIFICATIONS

OR 13.25

230V~ 50 Hz

2500W

Overheat protection system:

CAUTION: This product has an overheat protection system that shuts off when the product parts become excessively hot. If the product shuts off, immediately ensure the product has been pressed to “O” (OFF) and unplug it from the electrical outlet. a.

Remove any objects adjacent to the product that may be causing overheat conditions. b.

Do not attempt to operate the product until the overheat protection system has permanently interrupted product operation. The overheat protection system cannot be reset by the consumer. Do not open this product. There are no user-serviceable parts inside.

--SAVE THESE INSTRUCTIONS--

To assemble:

1.

Turn the radiator upside-down on a soft surface (i.e., a rug), to prevent damage to the paint finish or your floor surfacing.

2.

Fit the two (2) Feet onto the radiator by placing the arc-shaped brackets between the outermost fins on each side of the radiator.

3.

Securely fasten the two (2) Feet onto the radiator by screwing two (2) Wing Nuts onto each Foot.

CAUTION: Only operate the radiator in normal upright position with wheels and stand assemblies attached to the bottom of the unit (wheels on the bottom, controls on the top), any other position could create a hazardous situation

The annexation of the device’s cable is X type with special set wire way

To operate:

1.

Place the product on a flat, steady, stable, heat-resistant surface.

2.

Plug the Power Cord into a standard 230V AC electrical outlet.

3.

Turn the thermostat knob clockwise to a position on its range.

4.

Press the power switches buttons either to “I” (Low heating) or “II” (Medium heating) or both “I+II” (High heating) position. (Fig. B)

Fig. B.

5.

Allow the heater to warm up until the ambient room temperature reaches your desired comfort level.

--SAVE THESE INSTRUCTIONS--

6.

When the room reaches the desired temperature, slowly turn the thermostat knob anticlockwise until you hear a click. This will automatically set your unit to cycle on and off to maintain the current room temperature thermostat setting. Note: It will normally require approx. 15 minutes to reach the operating temperature.

NOTE: The lower the thermostat setting, the lower the room temperature. The higher the thermostat setting, the higher the room temperature.

7.

To turn off the heater, press the power switches to “O” position. The power indicator light turns off.

8.

Unplug the product from the electrical outlet when it is left unattended or is not in use.

Care and Cleaning:

CAUTION: Allow the product to completely cool before handling or cleaning it.

Ensure the product is in the “O” (OFF) position and the Power Cord is unplugged from the electrical outlet before cleaning the product.

• Always ensure the product’s housing is intact and completely assembled before each use.

• Do not touch hot surfaces. Always use the handle of the product. Use protective mitts or gloves to avoid serious burns or other personal injury.

• Clean the exterior surface of the product by wiping it with a soft, damp cloth.

CAUTION: Do not allow water or other liquids to run into the interior of the product, as this could create a fire and/or electrical hazard.

• Do not use any abrasive cleaners or solvents, as product damage will occur.

• Store the product in a clean, dry place when it is not in use.

Conformity with Directives

This product is CE marked to denote conformity with Directives 73/23/EEC(Low

Voltage) and 89/336/EEC (Electromagnetic Compatibility), as amended.

Environmental Protection

Waste electrical products should not be disposed of with household waste.

Please recycle where facilities exist. Check with your Local Authority or retailer for recycling advice.

--SAVE THESE INSTRUCTIONS--