LG KF310 User Manual

PDF

Tài liệu

Quảng cáo

English

KF310 USER GUIDE

This document is the user guide for the LG

KF310 3G Video Mobile Phone. All rights for this document are reserved by LG Electronics.

Copying, modifying and distributing this document without the consent of LG

Electronics are prohibited.

Disposal of your old appliance

1. When this crossed-out wheeled bin symbol is attached to a product it means the product is covered by the European Directive 2002/96/CE.

2. All electrical and electronic products should be disposed of separately from the municipal waste stream via designated collection facilities appointed by the government or the local authorities.

3. The correct disposal of your old appliance will help prevent potential negative consequences for the environment and human health.

4. For more detailed information about disposal of your old appliance, please contact your city office, waste disposal service or the shop where you purchased the product.

Part 15.21 statement

" Change or Modifications that are not expressly approved by the manufacturer could void

the user's authority to operate the equipment. "

Part 15.105 statement

This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. if this equipment does cause harmful interference or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected

- Consult the dealer or an experienced radio/TV technician for help.

LIMITED WARRANTY STATEMENT

1. WHAT THIS WARRANTY COVERS

LG offers you a limited warranty that the enclosed subscriber unit and its enclosed accessories will be free from defects in material and workmanship, according to the following terms and conditions:

(1) The limited warranty for the product extends for ONE (1) year beginning on the data of purchase of the product.

(2) The limited warranty extends on to the original purchaser of the product and is not assignable or transferable to any subsequent purchaser/end user.

(3) This warranty is good only to the original purchaser of the product during the warranty period as long as it is in the U.S., including Alaska, Hawaii, U.S. Territories and Canada.

(4) The external housing and cosmetic parts shall not be covered under these limited warranty terms.

(5) Upon request from LG, the consumer must provide information to reasonably prove the date of purchase.

(6) The customer shall bear the cost of shipping the product to the Customer Service Department of

LG. LG shall bear the cost of shipping the product back to the consumer after the completion of service under this limited warranty.

2. WHAT THIS WARRANTY DOES NOT COVER:

(1) Defects or damages resulting from use of the product in other than its normal and customary manner.

(2) Defects or damages from abnormal use, abnormal conditions, improper storage, exposure to moisture or dampness, unauthorized modifications, unauthorized connections, unauthorized repair, misuse, neglect, abuse, accident, alteration, improper installation, or other acts which are not the fault of LG, including damage caused by shipping blown fuses spills of food or liquid.

(3) Breakage or damage to antennas unless caused directly by defects in material or workmanship.

(4) That the Customer Service Department at LG was net notified by consumer of the alleged defect or malfunction of the product during the applicable limited warranty period.

(5) Products which have had the serial number removed or made illegible.

(6) The limited warranty is in lieu of all other warranties, express or implied either in fact or by operations law, statutory or otherwise, including, but limited to any implied warranty of marketability or fitness for a particular use.

(7) Damage resulting from use of non-LG approved accessories.

(8) All plastic surfaces and all other externally exposed parts that are scratched or damaged due to normal customer use.

(9) Products operated outside published maximum ratings.

(10) Products used or obtained in a rental program.

(11) Consumables (such as fuses).

3. STATE LAW RIGHTS:

No other express warranty is applicable to this product. THE DURATION OF ANY IMPLIED

WARRANTIES, INCLUDING THE IMPLIED WARRANTY OF MARKETABILITY, IS LIMITED

TO THE DURATION OF THE EXPRESS WARRANTY HEREIN. LG INFOCOMM INC. SHALL

NOT BE LIABLE FOR THE LOSS OF THE USE OF THE PRODUCT, INCONVENIENCE, LOSS

OR ANY OTHER DAMAGES, DIRECT OR CONSEQUENTIAL, RISING OUT OF THE USE OF,

OR INABILITY TO USE, THIS PRODUCT OR FOR ANY BREACH OF ANY EXPRESS OR

IMPLIED WARRANTY, INCLUDING THE IMPLIED WARRANTY OF MARKETABILITY

APPLICABLE TO THIS PRODUCT. Some states do not allow the exclusive of imitation of incidental or consequential damages or limitations on how long an implied warranty lasts; so these limitations or exclusions may not apply to you. This warranty gives you specific legal rights and you may also have other rights which vary from state to state.

4. HOW TO GET WARRANTY SERVICE:

To obtain warranty service, please call the following web address:

www.lgeservice.com

For Your Safety

Important Information

This user guide contains important information on the use and operation of this phone. Please read all the information carefully for optimal performance and to prevent any damage to or misuse of the phone. Any changes or modifications not expressly approved in this user guide could void your warranty for this equipment.

Before You Start

Safety Instructions

WARNING!

To reduce the possibility of electric shock, do not expose your phone to high humidity areas, such as the bathroom, swimming pool, etc.

Always store your phone away from heat.

Never store your phone in settings that may expose it to temperatures less than

32°F or greater than 104°F, such as outside during extreme weather conditions or in your car on a hot day. Exposure to excessive cold or heat will result in malfunction, damage and/or catastrophic failure.

Be careful when using your phone near other electronic devices.

RF emissions from your mobile phone may affect nearby in adequately shielded electronic equipment. You should consult with manufacturers of any personal medical devices such as pacemakers and hearing aides to determine if they are susceptible to interference from your mobile phone.

Turn off your phone in a medical facility or at a gas station.

Never place your phone in a microwave oven as this will cause the battery to explode.

IMPORTANT!

Please read the TIA SAFETY INFORMATION on page 78 before using your phone.

Safety Information

Read these simple guidelines. Breaking the rules may be dangerous or illegal. Further detailed information is given in this user guide.

]

Never use an unapproved battery since this could damage the phone and/or battery and could cause the battery to explode.

] Never place your phone in a microwave oven as it will cause the battery to explode.

]

Do not dispose of your battery by fire or with hazardous or flammable materials.

]

Make sure that no sharp-edged items come into contact with the battery. There is a risk of this causing a fire.

] Store the battery in a place out of reach of children.

]

Be careful that children do not swallow any parts such as rubber plugs (earphone, connection parts of the phone, etc.). This could cause asphyxiation or suffocation.

For Your Safety

] Unplug the power cord and charger during lightning storms to avoid electric shock or fire.

]

When riding in a car, do not leave your phone or set up the hands-free kit near to the air bag. If wireless equipment is improperly installed and the air bag is activated, you may be seriously injured.

]

Do not use a hand-held phone while driving.

]

Do not use the phone in areas where its use is prohibited.

(For example: aircraft).

]

Do not expose the battery charger or adapter to direct sunlight or use it in places with high humidity, such as a bathroom.

]

Never store your phone in temperatures less than- 4°F or greater than 122°F.

]

Do not use harsh chemicals (such as alcohol, benzene, thinners, etc.) or detergents to clean your phone. There is a risk of this causing a fire.

]

Do not drop, strike, or shake your phone severely. Such actions may harm the internal circuit boards of the phone.

]

Do not use your phone in high explosive areas as the phone may generate sparks.

] Do not damage the power cord by bending, twisting, pulling, or heating. Do not use the plug if it is loose as it may cause a fire or electric shock.

] Do not place any heavy items on the power cord. Do not allow the power cord to be crimped as it may cause fire or electric shock.

] Do not handle the phone with wet hands while it is being charged. It may cause an electric shock or seriously damage your phone.

]

Do not disassemble the phone.

]

Do not place or answer calls while charging the phone as it may short-circuit the phone and/or cause electric shock or fire.

] Only use the batteries, antennas, and chargers provided by

LG. The warranty will not be applied to products provided by other suppliers.

] Only authorized personnel should service the phone and its accessories. Faulty installation or service may result in accidents and consequently invalidate the warranty.

]

Do not hold or let the antenna come in contact with your body during a call.

] An emergency call can be made only within a service area.

For an emergency call, make sure that you are within a service area and that the phone is turned on.

For Your Safety

FCC RF Exposure Information

WARNING!

Read this information before operating the phone.

In August 1996, the Federal Communications (FCC) of he United

States, with its action in Report and Order FCC 96-326, adopted an updated safety standard for human exposure to radio frequency (RF) electromagnetic energy emitted by FCC regulated transmitters. Those guidelines are consistent with the safety standard previously set by both U.S. and international standards bodies.

The design of this phone complies with the FCC guidelines and these international standards.

CAUTION

Use only the supplied and approved antenna. Use of unauthorized antennas or modifications could impair call quality, damage the phone, void your warranty and/or result in violation of FCC regulations. Do not use the phone with a damaged antenna. If a damaged antenna comes into contact with skin, a minor burn may result. Contact your local dealer for a replacement antenna.

Body-worn Operation

This device was tested for typical body-worn operations with the back of the phone kept 0.79

inches (2cm) between the user’s body and the back of the phone. To comply with FCC RF exposure requirements, a minimum separation distance of 0.79

inches (2cm) must be maintained between the user's body and the back of the phone. Third-party belt-clips, holsters, and similar accessories containing metallic components should not be used. Body-worn accessories that cannot maintain 0.79

inches (2cm) separation distance between the user's body and the back of the phone, and have not been tested for typical body-worn operations may not comply with FCC RF exposure limits and should be avoided.

For Your Safety

Vehicle Mounted External Antenna

(optional, if available)

A minimum separation distance of 8 inches (20cm) must be maintained between the user/bystander and the vehicle mounted external antenna to satisfy FCC RF exposure requirements. For more information about RF exposure, visit the FCC website at www.fcc.gov

FCC Part 15 Class B Compliance

This device and its accessories comply with part 15 of FCC rules. Operation is subject to the following two conditions:

(1) This device and its accessories may not cause harmful interference, and (2) this device and its accessories must accept any interference received, including interference that may cause undesired operation.

Cautions for Battery

] Do not disassemble.

] Do not short-circuit.

]

Do not expose to high temperature: 60°C (140°F).]

]

Do not incinerate.

Battery Disposal

] Please dispose of your battery properly or bring to your local wireless carrier for recycling.

]

Do not dispose in fire or with hazardous or flammable materials.

Adapter (Charger) Cautions

] Using the wrong battery charger could damage your phone and void your warranty.

] The adapter or battery charger is intended for indoor use only.

Do not expose the adapter or battery charger to direct sunlight or use it in places with high humidity, such as the bathroom.

KF310 Features

Parts of the phone

Open view

Earpiece

Navigation keys v In standby mode:

U List of Profiles

D Contacts list u Messaging d Calendar v In menu: Navigates menus.

Send key

OK (Confirm) key

Multitasking key

VGA camera

LCD screen v Top: Icons showing signal strength, battery level and various other functions v Bottom: Soft key indications

Call End key

Clear key

Alpha numeric keys v In standby mode:

Input numbers to dial.

Hold down:

0 for international calls.

1 to dial voice mail centre.

2 to 9 for speed dials.

v In editing mode: Enter numbers & characters.

KF310 Features

Send key v Dials a phone number and answers a call.

v In standby mode: Shows a history of calls made, received, and missed.

Left soft key/ Right soft key

Performs the function indicated at the bottom of the display.

OK (Confirm) key

Call End key v You can end a call.

v You can go back to standby mode by pressing this key when activating the menu.

Clear key

You can delete a letter or go back to previous menu.

Left side view

Headset/Charger/

Cable connector

Right side view

Handstrap Hole

Side keys

KF310 Features

Rear view

External camera lens

USIM card socket

Battery cover

Battery

Getting Started

Installing the USIM card and battery

1. Installing the USIM card.

Your USIM card contains your phone number, service details and contacts and must be inserted into your handset. If your USIM card is removed then your handset becomes unusable (except for emergency calls) until a valid one is inserted. Always disconnect the charger and other accessories from your handset before inserting and removing your USIM card. Slide the USIM card into the USIM card holder. Make sure that the USIM card is properly inserted and the gold contact area on the card is facing downwards. To remove the

USIM card, press down lightly and pull it in the reverse direction.

To insert the USIM card

To remove the USIM card

Note v The metal contact of the USIM card can easily be damaged by scratches. Pay special attention to the USIM card while handling. Follow the instructions supplied with the

USIM card.

Getting Started

Note v After removing the battery, insert USIM card.

2. Installing the battery.

Slide the battery upwards until it snaps back into place.

3. To remove the battery.

Turn the power off. (If the power is left on, there is a chance you could lose the stored telephone numbers and messages.)

Press and hold down the battery release button and slide the battery down.

Charging the Battery

Before connecting the travel adapter to the phone you must first install the battery.

1. With the arrow facing you as shown in the diagram push the plug on the battery adapter into the socket on the left side of the phone until it clicks into place.

Getting Started

2. Connect the o ther end of the travel adapter to the mains socket.

Note v Only use the charger included in the box.

3. The moving bars on the battery icon will stop after charging is complete.

4. Ensure the battery is fully charged before using the phone for the first time.

CAUTION!

• Do not force the connector as this may damage the phone and/or the travel adapter.

• If you use the battery pack charger when abroad, use an attachment plug adaptor for the proper configuration.

• Do not remove your battery or the

USIM card while charging.

WARNING!

• Unplug the power cord and charger during lightning storms to avoid electric shock or fire.

• Make sure that no sharp-edged items such as animal teeth or nails, come into contact with the battery. This may cause a fire.

Disconnecting the charger

Disconnect the travel adapter from the phone as shown in the diagram below.

How to use a microSD memory card

<How to insert a microSD memory card>

1. Turn the phone off. Inserting or removing the microSD when the phone is on may damage the files stored in the memory card.

2. Lift the plastic cover which protects the microSD slot.

Getting Started

3. Insert the memory card into the slot. The gold contacts must be kept on the back of the microSD.

Don’t push the microSD too much. If it doesn't go into the slot easily, you may be trying to insert it in the wrong way or there could be a foreign object in the slot.

4. Once inserted, push the memory card until you hear a Click, meaning that the microSD has been correctly engaged.

5. Close the plastic slot protection.

6. To remove the memory card, turn the phone off, open the slot protection and push the microSD to unlock it. Carefully extract the memory card.

Attention: v Avoid using the Flash Memory

Card when the battery is low.

When writing to the card, wait for the operation to complete before removing the card.

v The card is designed to fit easily into the system one way only.

v Do not bend the card or force it into the slot.

Do not insert any memory cards other than those made by microSD.

v If the microSD has been formatted using FAT32, format the microSD using FAT16 again.

For more information on the microSD, please refer to the memory card instruction manual.

Memory card formatting

Before you start to use the memory card you have to format it. After you insert the memory card, select

Menu → Settings → Phone settings → Memory manager →

External memory , then press L the left soft key.

This operation should only be done when you insert the memory card for the first time. During formatting various folders will be created for different data types.

Turning the handset on/off

Turning your handset on

Ensure that your USIM card is in your handset and the battery is charged. Press and hold e until the power comes on. Enter the

USIM PIN code that was supplied with your USIM card if the PIN code request is set to On .

(Note: Please refer to page 79) After a few seconds you will be registered on the network.

Turning your handset off

Press and hold e until the power goes off. There may be a few seconds delay while the handset powers down. Do not turn the handset on again during this time.

Getting Started

Access codes

You can use the access codes described in this section to avoid unauthorised use of your phone.

The access codes (except the PUK and PUK2 codes) can be changed by using the Change codes feature.

PIN code (4 to 8 digits)

The PIN (Personal Identification

Number) code protects your USIM card against unauthorised use. The

PIN code is usually supplied with the USIM card. When the PIN code request is set to On , your phone will request the PIN code every time it is switched on. When the

PIN code request is set to Off , your phone connects to the network directly without the PIN code.

PIN2 code (4 to 8 digits)

The PIN2 code, supplied with some

USIM cards, is required to access functions such as Fixed dial number.

These functions are only available if supported by your USIM card.

PUK code (8 digits)

The PUK (PIN Unblocking Key) code is required to unblock a blocked

PIN code. The PUK code may be supplied with the USIM card. If not, contact your network operator’s customer service department for the code. If you lose the code, contact your network operator’s customer service department.

PUK2 code (8 digits)

The PUK2 code, supplied with some

USIM cards, is required to unblock a blocked PIN2 code. If you lose the code, contact your network operator’s customer service department.

Security code (4 digits)

The security code prevents unauthorised use of your phone.

The default security code is set to ‘0000’ and the security code is required to delete all phone entries and to restore the handset to the factory settings.

Display information

No USIM idle screen

This is the initial screen of the phone that appears when there is no USIM card installed in the phone, or the installed USIM card is invalid. In this screen, users can only make emergency calls, and turn the phone off. To turn the phone off, press and hold down e for a few seconds.

Screen structure

If there is no USIM card installed, an animation telling you to insert a

USIM card appears. If the USIM card inserted into the phone is invalid, an animation telling you that the

USIM card is locked appears.

Getting Started

Emergency call function

The right soft key is represented by “Emergency” on the screen.

Press the right soft key or dial your emergency number using the number keys, and then press O to make an emergency call.

Idle screen

The idle screen appears when you have installed a proper USIM card and turned the phone on.

Screen structure

Idle screen consists of the operator's name, indicators, date and time on a background image. You can change the wallpaper in the Display settings menu.

Numbering screen

The numbering screen appears when a number key is pressed in the idle screen.

Screen structure

The numbering screen consists of status indicators, dialled number and soft menu. Status indicators are the same as those of the idle screen.

You can change the size and colour of the dialling font in the Display settings menu. You can make a call while dialling a phone number by pressing s .

Soft key

You can use the soft keys for several functions while dialling a number.

Using the left soft key, you can make a video call, send a message to the number, save the number to

Contacts, search contacts.

Handset lock screen

When the Handset lock function is selected, you can only make an emergency call, release the lock, and turn off the phone in this screen. As always, you can turn the phone off by pressing and holding e for a few seconds.

Screen structure

The screen structure of the Handset lock screen is the same as that of the idle screen.

Emergency call function

You can make an emergency call using the right soft key. As with the No USIM idle screen, only emergency numbers can be dialled.

Unlock function

If you press key except right soft key and number key, a popup screen appears asking you to input the Security code to unlock the phone. The Security code is configured in the Change codes (#.

Settings → 2. Phone settings → 6.

Security → 3. Change codes). If you key in an incorrect Security Code, the phone will remain in Handset lock status. If you key in the correct

Security code, the phone will be unlocked, and the idle screen will be displayed. If you have turned the phone off in the Handset lock status, you will find the phone remains in Handset lock status when you turn it on.

Getting Started

Barring password

This service obstructs calling service in some conditions. This condition can be edited using the Call barring feature (#. Settings → 4.

Call settings → 2. Call barring). The barring password is required when you use the call barring function.

The password is obtained from your network operator's customer service when you subscribe to this service. While this service is activated, the caller will hear the information message that the call is not connected because of the call barring.

General Functions

Making and answering calls

Making a voice call

1. Enter the number including the full area code.

v To delete a digit press c key.

To delete all digits press and hold c key.

2. Press s to make the call.

3. Press e to finish the call, or close the handset.

Note v To activate the speakerphone during a call, activate the touch keys and press O .

Making a call from the call logs

1. In standby mode, press s and the latest incoming, outgoing and missed phone numbers will be displayed.

2. Select the desired number by using d / u .

3. Press s to call the number.

Making a video call

You can make a video call in a 3G covered service area. If the called user has a 3G video phone in a 3G covered service area, the call will be established. You can also answer a video call for video incoming call.

To make/answer a video call, do the following.

1. Input the phone number using the keypad, or select the phone number from the calls made/ received lists.

To correct mistakes, press c briefly to delete the last number, or press and hold c to delete all numbers.

Multimedia

2. If you do not want to use the speakerphone, ensure you have the headset plugged in.

3. To start the video function, press the left soft key [Options] and select Video call.

v You will be notified that you will need to close other applications to make the video call.

Note v The video call may take some time to connect. Please be patient. The connection time will also depend on how quickly the other party answers the call. While the video call is connecting, you will see your own image; after the other party has answered, their image will be displayed on the screen.

4. Adjust the camera position if necessary.

5. Press e to finish the call, or close the handset.

Making a voice/video call from Contacts

It is easy to call anyone whose number you have stored in your

Contacts.

1. Press d to access the contacts list.

2. Scroll to the contact to make a call.

3. Press s to make a voice call.

Press the left soft key and select

Make video call to make a video call.

4. Press e to finish the call.

Making international calls

1. Press and hold 0 for the international prefix. The

‘+’ character prefixes the international access code.

2. Enter the country code, area code, and the phone number.

3. Press s .

Answering a call

When you receive a call, the phone rings and the flashing phone icon appears on the screen. If the caller can be identified, the caller’s phone number (or name if stored in your

Contacts) is displayed.

1. Open the slider to answer an incoming call.

Shortcut to activate vibrate mode

You can activate the vibrate only mode by pressing and holding down # after opening the phone.

Signal strength

You can check the strength of your signal by the signal indicator on the

LCD screen of your phone. Signal strength can vary, particularly inside buildings. Moving close to a window may improve reception.

Note v To reject an incoming call, press e or the right soft key twice.

v If you set Answer mode as

Press send key (Menu #.4.0.4), you can answer the call by pressing slider.

s after opening the v If the answer mode is set to

Press any key, any key will answer a call except for .

Entering text

You can enter alphanumeric characters using the keypad. For example, storing names in Contacts, writing a message, creating a personal greeting or scheduling events in the calendar all require entering text.

Multimedia

The following text input methods are available with the handset.

T9 mode

This mode lets you enter words with only one keystroke per letter. Each key on the keypad has more than one letter. The T9 mode automatically compares your keystrokes with an internal dictionary to determine the correct word, thus requiring far fewer keystrokes than the traditional ABC mode. This is sometimes known as predictive text. If you press # key for a long time, you can activate or cancel T9 mode.

ABC mode

This mode lets you enter letters by pressing the key labelled with the required letter once, twice, three or four times until the letter is displayed.

123 mode (Number mode)

Type numbers using one keystroke per number.

Changing the text input mode

1. When you are in a field that allows characters to be entered, you will notice the text input mode indicator in the upper right corner of the LCD screen.

2. If T9 is on, you can change the mode to T9Abc, T9ABC, 123,

T9abc by pressing # . When T9 is off, the mode will be changed to Abc, ABC, 123, abc.

Using the T9 Mode

The T9 predictive text input mode allows you to enter words easily with a minimum number of key presses. As you press each key, the handset begins to display the characters that it thinks you are typing based on a built-in dictionary. As new letters are added, the word changes to reflect the most likely candidate from the dictionary.

1. When you are in the T9 predictive text input mode, start entering a word by pressing 2 to 9 .

Press one key per letter.

The word changes as letters are typed. Ignore what’s on the screen until the word is typed completely.

v If the word is still incorrect after typing completely, press # once or more to scroll through the other word options.

v If the desired word is missing from the word choices list, add it by using the ABC mode.

2. Enter the whole word before editing or deleting any keystrokes.

3. Complete each word with a space by pressing 0 . To delete letters, press c .

Using the ABC Mode

Use to to enter your text.

1. Press the key labelled with the required letter: v Once for the first letter.

Twice for the second letter.

v And so on.

2. To insert a space, press 0 once.

To delete letters, press c .

Multimedia

Refer to the following table for more information on the characters available using the alphanumeric keys.

Key

Characters in the order display

Lower case Upper case

1 . ,? ! ‘ “ 1 – ( ) @ / : _

2 a b c 2 ä à ç

3 d e f 3 è

4 g h i 4

5 j k l 5

6 m n o 6 ö

7 p q r s 7 ß

8 t u v 8 ü

9 w x y z 9

0 Space, 0

. ,? ! ‘ “ 1 – ( ) @ / : _

AB C 2 Ä À Ç

D E F 3 È

G H I 4

J K L 5

M N O 6 Ö

P Q R S 7 ß

T U V 8 Ü

W X Y Z 9

Space, 0

Using the 123 (Number) mode

The 123 mode enables you to enter numbers in a message(a telephone number, for example). Press the keys corresponding to the required digits before manually switching back to the appropriate text entry mode.

Using the symbol mode

The symbol mode enables you to enter various symbols or special characters. To enter a symbol, select

Options → Insert → Symbols . Use the navigation and numeric keys to select the desired symbol and press

O .

Note v The characters assigned to the keys and their order of appearance depends on the language selected using the option Input method. The table above provides the characters set for English language.

Overview of Menu Functions

You can launch a menu by pressing O in the idle screen. Move to the desired item and press O to go into the sub menu.

From the main menu you can also go into a submenu by directly pressing the corresponding numeric key as follows. The main menu consists of the following top menus and sub menus.

1. Entertainment

1.1 Games

1.2 Mobile TV

2. Vodafone live!

2.1 Vodafone live!

2.2 Enter URL

2.3 Bookmarks

2.4 RSS reader

2.5 Saved pages

2.6 History

2.7 Browser settings

3. Applications

4. Camera

4.1 Still camera

4.2 Video camera

Overview of Menu Functions

5. Messaging

5.1 Create new

5.2 Inbox

5.3 Email

5.4 Drafts

5.5 Outbox

5.6 Sent messages

5.7 My folders

5.8 Templates

5.9 Emoticons

5.0 Messaging settings

6. My Files

6.1 Pictures

6.2 Sounds

6.3 Videos

6.4 Games

6.5 Applications

6.6 SVG contents'

6.7 Others

6.8 External memory

7. Organiser & Tools

7.1 Alarms

7.2 Calendar

7.3 Quick menu

7.4 SIM Tool Kit

7.5 Tasks

7.6 Memo

7.7 Voice recorder

7.8 Private memo

7.9 Calculator

7.* Stopwatch

7.0 Converter

7.# World time

7.13 Organiser settings

8. Contacts

8.1 Add new

8.2 Contacts list

8.3 Groups

8.4 Speed dials

8.5 Service dial numbers

8.6 Own number

8.7 My business card

8.8 Contact settings

9. Calls

9.1 All calls

9.2 Dialled calls

9.3 Received calls

9.4 Missed calls

*. Video call

0. Music

0.1 Recently played

0.2 My music

0.3 Radio DJ

0.4 Music store

0.5 Song recognition

#. Settings

#.1 Profiles

#.2 Phone settings

#.3 Display settings

#.4 Call settings

#.5 Messaging settings

#.6 Contact settings

#.7 Connectivity

#.8 Java settings

Entertainment [Menu 1]

Games

Menu 1.1

You can easily download games and play the default games. If you want to download games. select

Download games in this menu.

Mobile TV

Menu 1.2

You can access Mobile TV by selecting this menu.

Vodafone live! [Menu 2]

Vodafone live!

Menu2.1

You can launch the web browser and access the homepage of the activated profile on Browser settings.

You can also directly access

Vodafone live! by pressing the right soft key in idle mode.

Enter URL

Menu 2.2

You can manually enter a URL address and access the associated web page.

v To enter a symbol, press the left soft key [Options] and select

5.Insert symbol from Options menu to display the symbol table.

v To switch input mode, press the left soft key [Options] and select 6.

Input method.

Bookmarks

Menu 2.3

You can store frequently accessed or favourite URLs/Pages. New

Folder, Add new, Edit, Delete, Move,

Send or Mark/Unmark operations can be performed on Bookmarks.

Several preconfigured URLs are stored as bookmarks.

Adding a new bookmark

1. Press the left soft key [Options] and select 1. Add new from

Options menu.

2. Enter the title and associated URL information.

3. Press O to save.

Connecting to a desired bookmark

Press to connect a desired bookmark.

Sending the bookmark to others

Select Send from Options menu.

You can send it via Message or

Email.

Deleting a bookmark

Select Delete from Options menu.

You can delete multiple bookmarks using the Mark/Unmark option.

Editing a bookmark

Select Edit from Options menu.

Edit the title and associated URL information. Press to save.

RSS reader

Menu 2.4

RSS reader provide news updates from websites registered in phone

You read these files in Rss reader, which collects news from registered wabsites registered in your phone and provides it to you in a simple form.

Saved pages

Menu 2.5

The phone can save the page on display as an offline file. Up to 20 pages can be saved.

History

Menu 2.6

You can view the list of the pages you've already connected.

Browser settings

Menu 2.7

You can change the settings for browser connectivity and display.

Profiles

(Menu 2.7.1)

Select the appropriate profile by pressing O . This will activate the profile to initiate the browser launch.

Appareance settings

(Menu 2.7.2)

You can set the browser default character, the scroll speed, Show image , and Java script by using this menu.

Vodafone live!

Cache

(Menu 2.7.3)

Enabling Cache allows you to store accessed pages to your phone.

Once a page has been stored in the

Cache it will greatly enhance the page loading speed on subsequent browsing of the same page.

Cookies

(Menu 2.7.4)

Enabling Cookie allows you to store cookies sent from the server.

Disabling this function will prevent cookies from being stored on your phone.

Security

(Menu 2.7.5)

Certificates list

(Menu 2.7.5.1)

Certificates can be viewed from the list.

Session clear (Menu 2.7.5.2)

Secure (WTLS/TLS) session data can be cleared using this option.

Session data should be cleared to establish a new secure session.

Reset settings

(Menu 2.7.6)

Select this to reset your phone to its default browser configuration.

Applications [Menu 3]

You can easily download other applications when you select the embedded link in this menu.

Please note that additional cost may be incurred when using online services. You can create a folder using the left soft key [Options].

Camera [Menu 4]

Still camera

Menu 4.1

This application enables you to take a still picture. You can take a picture in the size you want, and use it for the address book photo, home screen and other more general purposes. Once taken, the picture can be sent by

Message, Email, or Bluetooth O .

Brightness: From –2.0 to 2.0 at 0.5 intervals. The higher the level, the brighter the screen.

Press the left soft key to access Options and set the desired environment as follows.

v Move between the options menus with l / r .

v Select the desired value with u / d and confirm the selection with O .

Menu

Go to

Size

Description

The Pictures folder is launched and displays existing pictures as thumbnails.

You can view pictures by pressing

O . You can also send the selected picture to another party via Message, Email, or Bluetooth.

1600x1200, 1280x960, 640x480,

320X240, Wallpaper, 176x144,

Contact

Quality Super fine, Fine, Standard

Burst shot One, Three, Six, Nine (Note:

Available Burst shot depends on the size.)

Brightness From –2.0 to 2.0 at 0.5 intervals.

The higher the level, the brighter the screen.

White balance

You can adjust the tone of the background photo according to the weather. Auto, Daylight,

Cloudy, Illuminate, Indoors

Night mode

You can take better pictures at night by selecting On.

Menu

Frame

Shot

Timer

Effect

Description

You can apply one of 10 frame effects when taking a picture.

(available only in case of

Wallpaper size)

You can delay the camera shutter time. None, 3 secs, 5secs, 10secs.

“ ” is shown when the timer is activated.

None, Black & White, Negative,

Sepia

Sound

Mirror

Select the desired shutter Sound.

Memory Select the desired memory, either

Handset or External.

You can activate the mirror effect by selecting On.

Swap cam You can switch the camera to activate either the Internal or the

External camera.

Preview screen

Select the desired Preview method, either Full image, Full screen.

Camera

2. After finishing all the settings, press the right soft key [Close].

3. Focus the camera on what you want to take and press O .

4. Press O to save the picture. It is saved in the Pictures folder of My Files.

Note v Press the right soft key [Back] to go back to the preview mode without saving the picture.

Video camera

Menu 4.2

This application enables you to record a video clip. You can play and watch a saved video file in this menu. Once recorded, a video clip can be sent by

Message, Email or Bluetooth.

Brightness: From –2.0 to 2.0 at 0.5 intervals. The higher the level, the brighter the screen.

Press the left soft key to access Options and set the desired environment as follows.

v Move between the options menus with l / r .

Select the desired value with u / d and confirm the selection with O .

Camera

Menu

Go to

Description

The Videos folder is launched and displays existing videos as thumbnails. You can view videos by pressing O . You can also send the selected video to another party via Message, Email or Bluetooth.

176x144, 128x96 Size

Quality Super fine, Fine, Standard

Brightness From –2.0 to 2.0 at 0.5 intervals.

The higher the level, the brighter the screen.

White balance

You can adjust the tone of the background video according to the weather. Auto, Daylight,

Cloudy, Illuminate, Indoors

Menu

Night mode

Effect

Description

You can take better shots at night by selecting On .

None, Black & White, Negative,

Sepia

Duration Select the desired recording time.

MMS, 30 sec , 1 mins, 2 mins, 5 mins, 60 mins .

Memory Select the desired memory, either

Handset or External .

Mirror You can activate the mirror effect by selecting On .

Voice Decide whether to record the sound or not.

Swap cam You can switch the camera to activate either the Internal or the

External .

2. After finishing all the settings, press the right soft key [Close].

3. Focus the camera on what to record and press O to start recording.

And press O to stop recording.

v You can pause the recording by pressing the left soft key [Pause].

4. Press O to save the video clip. It is saved in the Videos folder of My

Files.

Note v Press the right soft key [Back] to go back to the preview mode without saving the video clip.

Messaging [Menu 5]

Create new

Menu 5.1

Message

(Menu 5.1.1)

You can write and edit a message containing a combination of text, image, video and audio.

1. Enter your message in the

Message field.

Option menus in Message field v

Insert: You can perform the following actions:

1. Image: You can insert an image. (Existing image/Take picture)

2. Video: You can insert a video clip. (One video clip per slide)

3. Sound: You can insert a sound file. (One sound per slide)

4. Symbols: You can insert symbols. After entering the corresponding number keys, press O .

5. Template: You can insert a text template saved on the phone. After selecting a template, press O . The selected template is inserted into the Message window.

6. Emoticon: You can insert an moticon on writing a message.

7. Name & number: After searching the name and the number in phonebook, you can insert the entry.

8. New slide: Select this to add a new slide.

9. Subject: Select this to insert a subject.

Save to drafts: Select this to save the message to drafts.

Input method: Select the desired dictionary mode.

v Writing language: You can select the language for writing a message.

v Add to dictionary: You can add a word to the dictionary.

2. Press the right soft key [Back] to exit the menu or go to previous menu after setting submenus.

3. Press the confirmation key

[Send] to send the message. The message will automatically be saved in the Sent Items folder. If the message has not been sent, it will remain in the Outbox with a failed status.

Email

(Menu 5.1.2)

To send/receive an Email, you should set up the Email account.

(Refer to page 56-59 for how to set up an Email account.)

1. Enter the Email addresses of the recipients in the To, Cc, Bcc fields.

You can search the Contacts by pressing O .

Note v Enter the reference Email address to forward the Email in

Cc(Carbon copy) field.

v Enter a hidden reference Email address to forward the Email without forwarding information in Bcc(Blind Carbon Copy) field.

v Only valid Email addresses are allowed for the recipient (To), reference address (Cc) and hidden reference address (BCC) fields. When an Email address has been specified, another field where you can specify another address appears. You can specify up to 20 recipients for the To and Cc address fields and 10 recipients for the BCC address field.

2. Move the cursor to the Subject field and key in the subject.

3. You can enter the message contents by moving the cursor to the Message field.

Messaging

4. Use the following functions by using the left soft key [Options].

Search contacts: Select this menu to insert Email addresses saved in Contacts. (Only shown in Option menu when cursor is located in To/Cc/Bcc fields.) v

Recently used: You can use the latest Email address you saved temporarily. (Only shown in

Option menu when cursor is located in To/Cc/Bcc fields.) v Insert: Select this menu to insert special characters, templates, and contacts. It is also possible to attach multimedia files (Image, videos and sounds).

v Save to drafts : Select this menu to save the message in Drafts.

View attachment: Shows the attached files. (This item is only available when some files have been attached.) v Remove: Deletes the attachment file. (This item is only available when the files are already attached.) v

Input method: Select the desired dictionary mode.

Writing language: You can change the writing language.

v Add to dictionary: You can add a new word to the dictionary.

v Set mail priority: You can configure the priority of the Email you wish to send.

5. When you have finished writing an Email, press O to send the

Email.

Voice message

(Menu 5.1.3)

You can send the message with a recorded voice.

1. Enter the voice message menu.

2. Press the centre key to record your voice message.

3. Press the centre key to stop the recording. For sending the message directly, press the centre key once again.

4. If you want to preview the message or save it to drafts, press the left soft key [Options].

3. To view a multimedia message

(Notification), select Retrieve in the message notification view screen. The file is then transmitted, and you can view the file when the transmission is complete.

You can use the following functions by using the left soft key [Options] in the Inbox.

Reply: Creates a reply to the sender or all recipients of the selected message.

v Forward: Forwards the selected message.

Inbox

Menu 5.2

1. You can view received messages.

Select a message and then press

O to view the message.

2. You can view the previous or next message by using l / r .

Note v Not supported for multimedia message (Notification) and WAP push messages.

Call: You can make a voice call or a video call.

Messaging v Delete: Deletes the current message.

Create new message: You can write a new message or an

Email.

Mark/Unmark: You can select one or more messages for multiple deletion.

v Copy&Move: In case of SMS, you can copy the message into

USIM or move the message into my folders/USIM.

v Move to my folders: In case of MMS, you can move the message into my folders.

Filter: Displays messages by desired message types.

v Message Info.: In case of SMS, you can check the message type, subject, type, from,to, time, priority, size and number of slide from, date and time and where it is saved.

Note v You can check the saved emails in Email [Menu 5.6].

Email

Menu 5.3

Viewing Email message list

1. Select an Email account and then press O to view the received

Email list.

2. In Email list, you can use the following functions by using the left soft key [Options].

Reply: Creates a reply to the selected Email.

Forward: Forwards the selected Email message to others.

v Retrieve (POP3 only):

Retrieves new Email messages.

v Copy to (IMAP only): Copies the selected email .

Search: Searches the Email you want to find out.

Delete: Deletes the Email.

v Delete from server (POP3 only): Deletes the message or

Email from server.

v Message synchronisation

(IMAP only): Synchronises

Email to retrieve Email server.

v Create new message: Creates a Message, Email, Voice message.

Mark/Unmark: Use mark/ unmark option for multiple deletion.

Set as read/unread: You can set the selected Email to read or unread.

v Sort by: You can sort Email according to the conditions.

v Expunge (IMAP only):

Removes the selected Email data at a time.

Message information: Brief information on the message including size, type, date, time and filenames.

Messaging

Viewing an Email message

1. Select one of the received Emails and press the View key to receive the contents of the Email.

2. The contents of the received

Email are automatically displayed in the View screen.

3. In the Email View screen, you can select the following functions by using the left soft key [Options].

Reply: Creates a reply to the selected Email.

Forward: Forwards the selected Email message to others.

v Save address: Saves the sender's address to Contacts.

v Delete: Deletes the Email.

Extract: Extracts the number,

Email address or Web address from Email message.

View attachment: Shows the attached file.

v View recipients: Shows the Email addresses of the recipients and reference (Cc).

Create new message:

Creates a Message,

Email,Postcard,Voice message.

Message infomation: Brief information on the message including size, type, date, time and filenames.

Drafts

Menu 5.4

You can view saved messages.

Select a message and then press

O to edit the message.

You can use the following functions by using the left soft key [Options].

Send: Sends the selected message.

Call: You can make a voice call or a video call.

Delete: Deletes the selected message.

v Create new message: You can write a message or an Email.

Mark/Unmark: You can select one or more messages for multiple deletion.

Filter: Displays messages by desired message types.

v Message info.: In case of SMS, you can check the message type, subject, from, date, time, size and where it's saved.

Outbox

Menu 5.5

The Outbox is a temporary storage place for messages waiting to be sent. Failed messages are also placed in Outbox. For example,

Emails will be placed in Outbox if the Email account is not correctly configured.

1. Select a message.

2. You can use the following functions by using the left soft key [Options].

[For sending / waiting messages] v

Create new message: You can write a new message or an Email.

v Cancel sending: You can stop sending/waiting status.

v Message information: You can check the message type, subject, from, date, time, size and where it's saved.

[For a failed message] v

Resend: Resends the selected message.

v Delete: Deletes the current message.

v Save to drafts: You can send the message to drafts.

Create new message: You can write a new message or an Email.

Message information: You can check the message type, subject, from, date, time, size and where it's saved.

Messaging

Sent messages

Menu 5.6

Shows the messages you sent

(Message/Email/Postcard/Voice message).

[Options] v

Reply: Creates a reply to sender or all recipients of the selected message.

v Forward: Forwards the selected message.

v Edit: You can edit the selected message.

Call: You can make a voice call or a video call.

Delete: Deletes the selected message.

v Create new message: You can write a Message or an Email.

v Mark/Unmark: You can select one or more messages for multiple deletion.

v Copy&Move: In case of SMS, you can copy the message into USIM or move the message into my folders/ USIM v

Filter: Displays messages by desired message types.

Message Info.: You can check the message type, subject, from, date, time, size and where it is saved.

My folders

Menu 5.7

You can move messages existed in Inbox or Sent messages into My folders, and then you can move those messages existed in My folders into the original message box.

Templates

Menu 5.8

Text templates

(Menu 5.8.1)

You can add, edit, and delete frequently used useful phrases using the left soft key [Options].

The following options are available.

Add new: You can create a new multimedia template.

v Write multimedia message:

Creates a multimedia message with the selected template.

v Edit: Edits the selected template.

Note v Depending on your service provider, useful phrases are saved as a default.

Multimedia templates

(Menu 5.8.2)

You can create, edit and view available templates when creating multimedia messages. Five types of template (Birthday, Greeting,

Holiday, Thanks, Sorry) are saved by default.

Emoticons

Menu 5.9

You can add, edit and delete emoticons. You can insert the emoticon which you preferred on writing a message. If you press confirmation key, you can view the icon.

Messaging settings

Menu 5.0

Text message

(Menu 5.0.1)

You can configure text message related options.

Messaging

1. Text message centre: Input the address of the Text message centre.

2. Delivery report: By enabling this option, you can verify whether your message has been sent successfully.

3. Validity period: This network service allows you to set how long your text messages will be stored at the message centre.

4. Message types: Text, Voice, Fax,

X.400, Email

Usually, the type of message is set to Text. You can convert your text into alternative formats.

Contact your service provider for the availability of this function.

5. Character encoding: Auto/

Default alphabet /Unicode v Auto(default): Message with single byte character is normally encoded in Default alphabet(GSM7). Message with double-byte character is automatically encoded in unicode(UCS2).

Default alphabet: Message with even double byte character is encoded in single byte. Please note that double byte characters with accent may be converted into single byte character without accent.

Unicode: Message is encoded in double byte. Please note that you may be charged double.

6. Send long text as: Select a long text message as Multiple SMS or

MMS.

Multimedia message

(Menu 5.0.2)

You can configure Multimedia message related options.

1. Retrieval mode: You can set the retrieval mode using

Home network and Roaming network respectively. If you select Automatic, you will receive multimedia messages automatically. If you select

Manual, you will only receive a notification message in the inbox and then you can decide whether to download multimedia messages or not.

2. Delivery report: Allows you to determine whether to request a delivery confirmation mail to a recipient, and whether to allow sending a delivery confirmation mail to a sender.

v Request report: Determines whether to request a delivery confirmation mail for a

Multimedia message.

Allow report: Determines whether to allow sending a delivery confirmation mail for a delivery confirmation mail request.

Read reply: Allows you to determine whether to request a read confirmation mail to a recipient, and whether to allow sending a read confirmation mail to a sender.

v Request reply: Determines whether to request a read confirmation mail for a

Multimedia message.

v Allow reply: Determines whether to allow sending a read confirmation mail for a read confirmation mail request.

Messaging

4. Priority: You can select the priority level of the messages

(Low, Normal and High).

5. Validity period: Allows you to configure the term of validity for a message when transmitting a multimedia message. The message would be saved in the multimedia message server only for the configured term.

6. Slide duration: Allows you to configure the duration of each page when writing a message.

7. Creation mode: Allows to select the contents type supported by

MMS. (Restricted, Warning and

Free)

8. Delivery time: Configures the delivery time of message to the recipient. The Multimedia message centre will deliver the message after the delivery time.

9. Multimedia msg. centre:

Allows you to configure network information such as the MMSC and the WAP gateway, to send a multimedia message.

Using the left soft key [Options], you can activate, add, view or delete a profile. A profilename selected by a checkmark is thecurrently configured value.

You can viewand edit the contents of the profile by using option menu.

Title: Profile name.

v MMSC URL: Enter the multimedia message centre

URL.

v Internet profiles: choose the

Internet Profile from the list.

Press the right soft key [Save] to save the changes and complete

Multimedia msg. centre setting.

Email

(Menu 5.0.3)

You can configure settings for receiving and transmitting emails.

1. Vodafone Mail: Access to

Vodafone Mail. (Note: This service is not available in all countries.

Please contact your service provider for further information.)

2. Email accounts: You can create or configure an Email account including the Email server and user ID. You can edit a selected

Email account by pressing the left soft key[option]- 2.Edit. You can select an Email account to be used to send an Email using . You can select the following functions using the left soft key [Options].

Add new: Create a new Email account.

Edit: To edit the selected Email account.

v View: Views a selected Email account.

v Mark/Unmark: Use mark/ unmark option for multiple deletion.

Delete: Deletes a selected

Email account. All the emails included in the account will be deleted.

3. Allow reply Email: Determines whether to allow sending a read confirmation mail for a read confirmation mail request.

4. Request reply Email: Determines whether to request a read confirmation mail.

5. Retrieve interval: You can configure Retrieve interval to retrieve emails automatically from the incoming mail server.

When a new Email arrives, an icon appears at the top of the screen.

You can select the auto receiving time slot to Off, 15 minutes,

30 minutes, 1 hour, 2 hours, 4 hours or 8 hours .

Messaging

Please note that additional charges may be incurred using the Retrieve interval feature.

6. Include original message:

Determines whether to include the original message when you forward the message or reply to it.

7. Include attachment:

Determines whether to include the attachment file when you forward the message.

8. Auto Retrieval in Roaming:

Retrieves Email account automatically when you move in roaming area.

9. New email notification: Receives the notification information when arriving new Email.

0. Signature: You can configure a text signature to be attached to the end of an Email. The configured signature text is automatically or manually attached to the end of the Email when it is sent.

*. Priority: You can select the priority level of Emails (Low,

Normal and High).

Creating a new Email account

1. Select Add new from the Email account menu options.

2. The following items need to be configured.

Title Enter a title.

My name Enter the my name.

Username Enter the user name of the Email account.

Password Enter the Email account password.

Email address

Enter the Email address for outgoing mail.

Reply email address

Enter the Email address to reply to your Email.

Outgoing mail server

Enter the outgoing Email server.

Incoming mail server

Enter the incoming Email server.

Title Enter a title.

Maximum receive size

Select the maximum Email receive size using the left soft key. The permissible maximum receive size is no more than 1MB

Mailbox type

Save to server

Select the Email inbox type either

POP3 or IMAP4 using the left soft key.

Determine whether to leave a copy of messages on the incoming server or not using the left soft key. When the mailbox type is set to IMAP4, a copy of messages are always saved to the server.

Save sent mail into

Access points

Auto retrieve

Select where to save the sent mails (when the mailbox type is set to IMAP4). When the mailbox type is POP3, sent mails are always saved into handset.

Select an access point to connect to the Internet. You can select a configured access point using the left soft key.

You can configure Auto retrieve to retrieve emails automatically from the incoming mail server.

Advanced settings

Sets the configuration to connect

Email server.

Title Enter a title.

SMTP port number

Enter the mail server port number.

In general, the SMTP (Outgoing mail server port number) is 25.

Incoming server port

Enter the mail server port number.

In general, the incoming mail server port number is 110(POP3) or 143(IMAP4).

SMTP authenticat ion

Decide whether the outgoing mail server to require authentication or not using the left soft key. When the SMTP authentication is set to On, you can enter the SMTP Username and SMTP Password for SMTP authentication.

SMTP

Username

SMTP

Password

APOP secure login

Enters SMTP user name to require authentification.

Enters SMTP password to require authentification.

Decide whether to activate APOP secure login or not using the left soft key. When the mailbox type is IMAP4, APOP secure login is always set to OFF.

3. Press the centre soft key [Save] to complete the Email account configuration.

Messaging

Voicemail

(Menu 5.0.4)

You can configure the voicemail receipt option.

Service message

(Menu 5.0.5)

You can configure the option settings such as Push(SI/SL) messages.

v Message receive: If you set

On, all service messages will be received.

v Service security: You can manipulate the overall receipt options related to Push(SI/SL) messages.

- Service security set

- Trusted: If you set On, the phone will verify the appropriateness of message by comparing to the list in Trusted list.

- Untrusted: If you set On, the phone will verify the appropriateness of message by comparing to the list in Untrusted list.

- Update: If you set On, you can update the ‘Trusted/Untrusted list’ with the address of message server. , you can choose which list you want to update by selecting one of options from popup list. In addition, server’ SMSC

& Originating address in the message will be updated to either of Trusted/Untrusted list.

- Trusted list: Only valid "Service security > Trusted list" status is

'On'. The list indicates the valid list of server's SMSC & Originating address(OA). Message which has differ value to either of SMSC or

OA address will be discarded.

- Untrusted list: Only valid "Service security > Untrusted list" status is

'On'. Message which has matched values(SMSC & Originating address) means invalid. Message which has differ value to either of SMSC or OA address will be accepted.

Info. service

(Menu 5.0.6) v

Cell broadcast: You can set the reception status.

Channels: You can add or modify the channels.

Languages: You can select the language you want by pressing

O .

.Then, the info service message will be shown in the language that you have selected.

My Files [Menu 6]

Pictures

Menu 6.1

The Pictures folder consists of embedded links for downloading pictures through the Internet and

Default images.

Pictures taken using the camera are stored in the Pictures folder and you can create new folders to manage them. You can also send multiple files to other people.

To view the picture in details, press the confirmation key.

When a file is selected, the following options will be displayed by pressing the left soft key [Options].

v Send: You can send the selected image via Message, Email or

Bluetooth.

Use as

- Wallpaper: You can set an image as the home screen theme.

- Contacts image: You can set the image of selected entry in contacts. When incoming a call, the image saved in contact is displayed.

- Start-up: You can set an image as shut up screen theme.

- Shut down: You can set an image as shut down image.

v Move: Enables the file to be moved to other folder.

v Copy: Enables the file to be copied to other folder.

Delete: Deletes the selected image.

Mark/Unmark: Using the Mark function, you can send, delete, move and copy multiple files.

v File

- Rename: You can rename the image.

- Edit: Enables the image to be edited.

Note v Edit menu is not displayed in default images folder.

- File info.: Shows information on the selected image file.

Create new folder: You can create a new folder within the folder currently selected.

Slide show: You can view the images as a slide show.

v Sort by: You can sort the files by date, file type or name.

v List view/Grid view: You can view the images as a List view or

Grid view.

Memory manager: You can view the memory status (handset or external memory card).

Sounds

Menu 6.2

The Sounds folder consists of embedded links for downloading ringtones and music as well as folders containing the Default sounds and Voice recordings.

Here you can manage, send or set sounds as ringtones.

When a file is selected, the following options will be displayed by pressing the left soft key [Options].

Use as

- Voice ringtone: You can set the sound file as a ringtone when incoming a voice call.

- Video ringtone: You can set the sound file as a ringtone when incoming a video call.

- Message tone: You can set the sound file as a ringtone when receiving a message.

My Files

- Start-up: You can set the sound file as a ringtone when handset starts up.

- Shut down: You can set the sound file as a ringtone when handset shut down.

Sort by: You can sort the files by date, file type or name.

v File info.: Shows the information on the selected sound file.

v Memory manager: You can view the memory status (handset or external memory card).

Videos

Menu 6.3

Here you can manage or send downloaded or captured videos clips.

If you press O , you can activate the video file.

The following are available using the left soft key [Options] in the

Video list.

Send: You can send the selected video clip via Message, Email or Bluetooth if not protected by Digital Rights Management

(DRM).

Use as: You can set the video file as voice ringtone or video ringtone.

v Move: Moves the file into handset memory or external memory.

v Copy: Copies the file in handset memory or external memory.

Delete: Deletes the selected video.

Mark/Unmark: Using the Mark function, you can send, delete, move and copy multiple files.

v File

- Rename: You can rename the video.

File info.: You can check information on video.

v Create new folder: You can create a new folder.

v Sort by: You can sort files by name, date, or file type.

List view/Grid view: You can view the images as a List view or

Grid view.

Memory manager: Displays the memory status (handset or external memory card).

You can view a video using the video player. Video files are displayed in the list as thumbnails.

You can select a desired video by using the u / d / l / r .

Select a desired video and select

Play to view the recorded video.

Select the left soft key [Send] to attach the selected video to a message, Email or Bluetooth.

When option Play is selected, the video clip will be played with the

Media Player. To pause the playback,

O press during the playback. To resume the paused playback, press

O once again.

When viewing video clips in the

Media Player, the following options are available: v Landscape view: You can view the video in wide view mode.

Note v You can also view the video in wide view mode by pressing

# key.

My Files v Mute/Unmute: If the Volume is set to more than 0, Mute mode is activated and if the Volume is set to 0, the Unmute mode is activated.

Capture: You can save what is on the paused screen as an image file (only possible in Pause mode).

Repeat: You can set the repeat option (Off/One/All).

v File info.: You can check information on files being played.

v Send: You can send the video via

Message, Email or Bluetooth if the file is not protected by Digital

Rights Management (DRM).

Delete: Deletes the selected video.

Use as: You can set the video file as voice ringtone or video ringtone. This menu is dependent upon the contents.

Games

Menu 6.4

You can easily download games and play the default games. If you want to download games. select

Download games in this menu.

Applications

Menu 6.5

You can easily download other applications when you select the embedded link in this menu. You can create a folder using left soft key [Options].

Note v In Games and Applications menu, Additional cost may be incurred when using online services.

SVG contents'

Menu 6.6

The SVG contents' folder contains all of your default and downloaded

SWF/SVG files.

When a file is selected, the following options will be displayed by pressing the left soft key [Options].

Play/Pause: Pause or resume playback.

v Send: Send the file as a message or via Bluetooth.

v Go to list: Return to your list of

SWF/SVG files.

Landscape view: View your SWF/

SVG in landscape view mode.

(this only appears if you select

Options without pausing).

Mute/Unmute: Switch the sound on/off.

v File info.: View the Name, Size,

Date, Type , Protect, installof the file.

v Send: Send the file as a message or Email or via Bluetooth.

Use as wallpaper: Set the SWF/

SVG file as a wallpaper.

Delete: Delete a SWF/SVG file.

Others

Menu 6.7

Other files except pictures, sounds, videos, games & applications are stored in this folder.

External memory

Menu 6.8

If you purchase an optional external microSD memory card, you can manage more content. Refer to the section How to use a microSD memory card on page 21 and 22 to learn how to insert and remove the memory card. You can manage content as you do on your phone.

Organiser & Tools [Menu 7]

Alarms

Menu 7.1

If you set the alarm, the appears on the indicator bar. The specified alarm sounds at the scheduled time. Press O to stop the alarm, and the alarm is released. Press the right soft key [Snooze] and choose the snooze interval. The alarm sound stops and resumes after the selected Snooze duration. You can configure up to 5 alarms.

1. Select your desired alarm to configure in the alarm list. If there is no alarm, press the left soft key

[Add] to add a new alarm.

2. Set/Cancel alarm: Set or cancel the alarm using the options for specifying whether the alarm is on or by choosing the alarm time.

3. Input alarm time: Input your desired alarm time by specifying

Hour and Minute. Choose either

‘AM’ or ‘PM’ which is visible if 12 hour format is specified for the phone.

4. Select repeat mode: Select the desired repeat mode using l

/ r or select the desired one from the list by pressing left soft key [List].

5. Select bell: Select the bell to ring at the alarm time opening the list by pressing left soft key [Edit].

6. Input memo: Input alarm name.

7. Snooze: You can set the snooze duration for the alarm.

8. When you have finished setting the alarm, press the centre key

[Save].

Note v The alarm will go off even when the phone is switched off.

Calendar

Menu 7.2

Schedule inquiry and search

1. Reference by Months

You can refer to your schedule by months. The cursor is on the current date, and the registered date is marked.

The schedule saved for the date where the cursor is located is represented by a grey box.

Pressing the shortcut key 1 moves to the previous year and pressing 3 move to the next year and pressing 5 moves to today. Pressing 7 moves to the previous month, and 9 moves to the next month. Pressing * moves to the weekly calendar.

You can move the date using u / d / l / r .

2. Detailed reference

You can refer to a detailed schedule, that is the whole contents of the schedule configured by the user. You can send the schedule to another phone or an Internet site through

SMS (Text message) or MMS

(Multimidia message) or Email or

Bluetooth using the left soft key

[Options].

Add new event

You can add an event. You can configure the start date, end date, start time, end time, contents, type of event, repetition, alarm of the schedule.

Set Category: Appointment,

Anniversary, Birthday v Set repeat: Once, Daily, Weekly,

Monthly, Annually, User setting

Multimedia

78 v Set alarm: No alarm, On time, 15 mins before, 30 mins before, 1 hour before, 1 day before, 3 days before, 1 week before

Delete all schedules

You can delete all saved schedule contents using this function.

Set up and release holiday

You can set up or release user holidays. Press the left soft key

[Options] and select Set holiday.

The selected date will be displayed in red.

To release the holiday, press the left soft key [Options] and select Clear holiday.

Schedule notification

If the user has configured the alarm setting, the specified alarm sound will ring. If the notification time is before the schedule start time, you can set up the alarm again.

Quick menu

Menu 7.3

You can specify functions to save in the Quick menu. If you save the functions frequently used in the

Quick menu, you can quickly start the functions simply by pressing key.

SIM Tool Kit

Menu 7.4

(SIM dependent)

Depending on whether you have

SAT support services or not (i.e.

USIM Application Toolkit) on the

USIM card, this menu may be different. If the USIM card supports

SAT services, this menu will be the operator-specific service name stored on the USIM card, for instance “Special”. Please refer in that case to the information provided with your USIM card for further information on how to use the related options.

Tasks

Menu 7.5

You can view, edit and add tasks to do. Tasks are displayed in time order.

Tasks that have been completed or not completed are displayed in different ways.

Add

To add a task, press the left soft key [Options] in the Tasks list management screen and select

Add new event option. Then input the date, description and priority for the task.

When you have finished entering the data, press the centre key [Save] to save the new task.

Detailed view and Edit

To view detailed task contents, locate the cursor on the desired item in the Tasks list, and then press the centre key. You can send, edit and delete a task using the left soft key [Options].

Set job status

Tasks set as finished are displayed as crossed out below the unfinished tasks in the Tasks list. You can set

Finished tasks to Not finished by selecting Options .

Memo

Menu 7.6

Using the memo management function, you can view and manage saved memo contents, and add new memo.

Multimedia

Add memo

To add a new memo, press [Add new memo] in Options. Enter the contents of the memo. You can save the memo to the list by pressing the centre key [Save].

Edit and delete memo

Highlight the desired memo and press O to view its contents.

You can edit or delete the contents of a memo using the left soft key

[Options]. You can return to the memo management screen by pressing right soft key [Back].

You can select Multiple or All memos using the Mark/Unmark option and then delete a memo using the Delete option.

Voice recorder

Menu 7.7

1. Press the left soft key [Option] to display the option pop up menu before recording.

2. Move to the desired menu item using u / d and press O .

Duration: You can set the recording duration to MMS msg. size, 30 secs, or 1 min, No limit.

v Quality: You can select a recording quality from Super fine,

Fine, and Normal .

v Memory in use: Choose whether to save your photos to the Handset memory or to the

External memory v

Go to my sounds: Opens the

Voice recordings folder in Sounds.

3. Pressing O starts recording.

When a recording is started, the recording time appears on the

LCD. To cancel the recording, press the Back.

4. When you finish the recording, press O to exit. The recorded file is automatically saved in the

Voice recordings folder in My files.

If you press O again, you can start recording new voice.

5. Press the left soft key to select the various options after the voice recording.

6. Select the desired menu using u / d and press O .

v Play: You can play the voice.

v Send: To send the recorded file.

Select one from Message, Email and Bluetooth using u / d and press O .

File: You can change the name of file and view the information.

Delete: Select this menu to delete a recorded file.

v Use as: You can set the recorded file athe Voice Ringtone, Video

Ringtone.

v Go to my sounds: Opens the

Voice recordings folder in My

Files.

7. Press the right soft key to close the sub-menu popup window.

Private memo

Menu 7.8

You can write the private memo to protect your privacy. You enter the security code to use this menu.

Add private memo

To add a new memo, press the left soft key [Add] or [Options]. Enter the contents of the memo. You can save the memo to the list by pressing the centre key [Save].

Organiser & Tools

Edit and delete a private memo

Highlight the desired memo and press O to view its contents. You can edit or delete the contents of a memo using the left soft key

[Options]. You can return to the memo management screen by pressing right soft key [Back]. You can select Multiple or All memos using the Mark/Unmark option and then delete a memo using the

Delete option.

Calculator

Menu 7.9

The calculator module allows you to perform basic arithmetic functions such as addition, subtraction, multiplication, and division as well as some scientific functions. (sin, cos, tan, log, ln, exp, sqrt, deg, rad)

1. Press the left soft key [Options].

2. Select the appropriate function.

You can enter numbers by using the number keys, and the operators by using u / d / l / r .

You can enter a decimal point by pressing # . Whenever you press c , characters are sequentially deleted in reverse order. Whenever you hold c down, all the characters are deleted in reverse order in one go.

When calculation is complete and the result is displayed on the screen, pressing a symbol saves the result into the symbol, and continues calculation.

Stopwatch

Menu 7.*

This menu allows you to record the elapsed time of an event.

Converter

Menu 7.0

Using this menu, users can convert

Currency, Surface, Length, Weight,

Temperature, Volume and Velocity.

1. Select the unit menu.

2. Users can set a exchange rate using option menu.

3. Enter the current rate, and then you can convert from one currency to another.

4. You can view the value of units.

5. Press [Reset] to clear the current input Field.

6. To exit the conversion function, press the [Back] key.

World time

Menu 7.#

The World time provides time information on major cities worldwide.

1. You can select a desired city as a base using the left soft key

Options → Add city → Press the left soft key [Map].

2. You can Change the city using the left soft key Options → Change city or Change current city.

3. You can apply to Daylight Saving time using the left soft key

Options → Daylight saving.

4. You can Select the Analog clock mode Options → Analog clock.

Organiser & Tools

Organiser settings

Menu 7.13

Calendar settings

(Menu 7.13.1)

You can set the configurations to view the calendar.

Default view: You can set the default value to view a calendar;

Month view, Week view v Weekly start time: 1AM, 2AM,

3AM, 4AM, 5AM, 6AM, 7AM, 8AM,

9AM, 10AM, 11AM, 12PM v Week starts on: You can set the default day to start a week;

Sunday, Monday

Send all schedules & to do via Bluetooth

(Menu7.13.2)

You can send all data of calendar or to do saved in phone to other phones by using Bluetooth.

Backup calendar & tasks

(Menu 7.13.3)

You can create the backup files of the calendar or tasks entries saved in the phone when you insert an external memory.

Restore calendar & tasks

(Menu 7.13.4)

You can reset the backup files of calendar or tasks when you insert an external memory.

Memory info.

(Menu 7.13.5)

You can view the information of available memory regarding

Calendar, Tasks, Memo and Secret memo.

Contacts [Menu 8]

Add new

Menu 8.1

You can register a new contact address. You can enter the name, different phone numbers and Email addresses of a new contact. You can also assign the contact to groups, include an image or avatar, assign a specific ringtone and even enter a memo for the contact. Other available fields include Home page

URL, Home address, Company name, Job title and company address. You can enter and manage contact addresses depending on the memory usage.

Contacts list

Menu 8.2

Performs the contact address search function. The search operation is performed based on a first name as a default. The current search method and results found are displayed in the Search window.

You can make a phone call or send a message to the selected phone number. A Contacts search can be performed based on the phone number or group information.

Note v In Settings menu, the search operation can be performed based on the last name.

Contacts

Groups

Menu 8.3

Using this menu you can manage group information (both stored in the Handset and the USIM). In the handset memory, there are 5 default groups: Family, Friends, Colleagues,

School and VIP. You can add, edit and delete groups. When a ringtone for a number is not specified, a call from the number sounds the group ringtone assigned to the number for the group.

Speed dials

Menu 8.4

Using this menu you can manage speed dials. Speed dials are configured between 2-9. You can register speed dials for a specific contact address up to 5 different numbers, and a contact address may have multiple speed dials.

Service dial numbers

Menu 8.5

You can view the list of Service

Dialling Numbers (SDN) assigned by your service provider (if supported by the USIM card). Such numbers include emergency, directory enquiries and voice mail numbers.

After selecting a service number, press s to dial the service.

Own number

Menu 8.6

Allows you to display your phone number in the USIM card. You can save own numbers being used in the USIM card.

My business card

Menu 8.7

You can create your own business card by pressing the left soft key

Add. After entering the name, number, Email and image, you can use it as a business card when sending the message.

Contact settings

Menu 8.8

Contact list setting

(Menu 8.8.1) v

Contacts location: Select which contact information shall be displayed (from handset memory, from USIM card or both). All is the default setting.

Name display: You can set the display order by name.

v Show picture: Select whether to display image/avatar or not.

Copy

(Menu 8.8.2)

You can copy contacts from the phone memory to the USIM or from the USIM to the phone memory.

You can copy all or selected entries at a time.

Move

(Menu 8.8.3)

You can move contacts from the phone memory to the USIM or from the USIM to the phone memory.

You can move all or selected items at a time.

Send all contacts via

Bluetooth

(Menu8.8.4)

You can send all phonebook data in handset to other phones by using

Bluetooth

Contacts

Backup contacts

(Menu 8.8.5)

You can save all phonebook data in handset to external memory card by formatting vcard.

Restore contacts

(Menu 8.8.6)

You can restore all phonebook data in external memory card to phone memory by formatting vcard.

Clear contacts

(Menu 8.8.7)

Clears all contact information. You can delete all contacts saved in the mobile phone memory as well as on the USIM card.

Memory info.

(Menu 8.8.8)

You can check the status of contacts memory in this menu.

Calls [Menu 9]

All calls

Menu 9.1

Allows you to view the missed, received, and dialled call records.

You can make a call, or send a message to the number you have selected from the records. You can also save the number in Contacts.

Missed calls

Menu 9.4

Allows you to view missed call records, make a call, send a message, and save the number in

Contacts.

Dialled calls

Menu 9.2

Allows you to view dialled call records, make a call, send a message, and save the number in

Contacts.

Received calls

Menu 9.3

Allows you to view received call records, make a call, send a message, and save the number in

Contacts.

Video call [Menu *]

You can make a video call using this menu.

1. Enter the number you want to dial.

v You can key in the number.

v You can select the number from Search contacts using the left soft key [Options]

2. Press the centre key [Video call] to make a video call.

During a video call

When you are in a video call, the screen will show the contact's name and duration of call, contact's image, volume indicator, video control panel, and your image.

You can access the following option menus by pressing the left soft key

[Options] .

v Speaker on/off or Bluetooth talk/Handset talk v Hold/Resume v Capture v

Camera in/out v View sender number v Go to contacts v Go to messages v

End call v Settings

Incoming video call

When a video call is received, the caller's information is displayed as following.

v Picture/Animation: Displays picture ID, graphic image configured in Contacts, or default animation indicating the incoming call.

Caller's name and number: Shows incoming caller's number. If the number is stored in Contacts, displays the name of the contacts.

Picture ID and animation setting is used in the order of Contacts, video file used in Group ringtone, and video file used in Profile.

Also, sound can be set for the incoming video call. The sound setting is used in the order of

Contacts, Group ringtone, and

Profile.

You can accept the incoming call by pressing the centre key [Accept].

Also you can accept the incoming call and show the private image by pressing the left soft key [Private].

The incoming call ringing can be silenced by pressing the right soft key [Silent]. It can be also silenced by long press on on the left side of the phone.

When ringing is silenced, press the right soft key [Reject] to reject the call.

Music [Menu 0]

Recently played

Menu 0.1

This menu shows the last 20 tracks that were played. And, if it starts to play, the menu "Now playing" will be displayed.

You can activate media player on playing through Now playing menu.

My music

Menu 0.2

All tracks

(Menu 0.2.1)

You can view all the music files stored in the phone/external memory.

Artists

(Menu 0.2.2)

You can view and play music sorted by Artists.

Albums

(Menu 0.2.3)

You can view and play music sorted by Albums.

Genres

(Menu 0.2.4)

You can view and play music sorted by Genres.

Playlists

(Menu 0.2.5)

You can create your own playlists by choosing tracks from the All tracks menu list.

Shuffle tracks

(Menu 0.2.6)

If you want to play the music continuously and randomly, select this option.

Radio DJ

Menu 0.3

You can listen to vodafone Radio station.

Note v This service is not available in all countries. Please contact your service provider for further information.

Song recognition

Menu 0.5

Selecting this menu starts dialling a number for song recognition. For further information, please contact your service provider.

Music store

Menu 0.4

Connects to the Vodafone music download site.

Note v Additional charges may be incurred when downloading music. Contact your service provider for further information.

Settings [Menu #]

Profiles

Menu #.1

You can select ringtone or vibration for an incoming call and configure the sound and volume of the ringtone, key tone, and sound effect, according to a profile. The profiles provided include [Normal],

[Silent], [Outdoor], [Flight mode],

[Customised 1], [Customised

2], and [Customised 3]. Select a profile, and press O to activate the profile. After pressing the left soft key [Options], select the Edit menu for the [Normal], [Outdoor],

[Customised 1], [Customised 2] and

[Customised 3] profile to change the configuration. A different list of options is available for each profile that has been selected for editing.

v Alert by

This option determines the incoming call notification mode.

You can select from [Ring],

[Vibration], [Silent], [Ring & vibration], [Ring after vibration],

[Max Ring & Vibration].

Voice ringtone

You can select the ringtone for incoming voice calls.

v Video ringtone

You can select the ringtone for incoming video calls.

Volume

Set the ringtone volume.

v Message alert

You can set how often the phone is to inform you of a received message until it is read.

v Message tone

You can select a file from among your own personal files or from the default files, to be played by the phone upon receiving a message.

Key tone

You can set the key tone to be played when pressing the keys.

v Key tone volume

You can set the volume of the chosen key tone, choosing from

7 available levels.

Slide tone

Select the desired tone the phone will emit when you slide up/down the phone.

v Confirmation tone

You can set the confirmation tone to be played by the phone to confirm actions.

v Start up sound

You can set the effect to be played when the phone is switched on.

Select start up sound

You can select which file will be played when the phone is switched on.

v Power off sound

You can set the effect to be played when the phone is switched off.

Select power off sound

You can select which file will be played when the phone is switched off.

Settings

Phone settings

Menu #.2

Date & Time

(Menu #.2.1)

Although the current time is automatically configured when the phone is registered to the network, users can configure the time and date directly using this menu. The time configured by the user is valid only while the phone is turned on.

Time

1. Select the Time item from the

Date & time list, and then press

O .

2. Move to your desired field, Hour ,

Minute , or am/pm field using the navigation keys. (When you have selected 12-hour/24-hour as

Time format )

3. Enter Hour , and Minutes using the number keys.

4. Select the time format using l / r .

5. Scroll down to select the hour indicator format i.e. Off, Cuckoo clock or Chime bell.

6. Press the centre soft key O to set the time with the specified value.

Date

1. Select the Date item from the

Date & time list, and then press .

2. Select the date format using l / r .

3. Enter Day , Month and Year using the number keys.

4. Press the centre soft key O to set the date with the specified value.

Auto update date/time

When Auto Update is configured to On, the time and date are automatically updated according to the current time zone. If Confirm first is selected, the time and date update is confirmed before it is updated automatically.

Daylight saving

Select whether to activate the daylight saving function or not. You can set the Summer time difference of selected home city for 1 hour or

2 hours.

Language

(Menu #.2.2)

Select the display language. You can select Automatic language option to change display language to the

USIM card supported language.

Auto key lock

(Menu #.2.3)

If you activate this function, the keypad will be locked automatically after predefined delay time when the slide is closed.

Security

(Menu #.2.4)

PIN code request

When this is set to On, you are requested to enter your PIN each time you switch the phone on.

Note v Press the right soft key in the

PIN code entry window to return to the previous step.

v 3 incorrect PIN code entries would invalidate the PIN code.

And you have to enter the

PUK (PIN Unblock Key) code to configure the PIN code again.

Settings

Note v The maximum number of times you may enter the PUK code is 10. (Note: If you enter an incorrect PUK code 10 times, the USIM card will be blocked and must be replaced.) v If the PIN code request cannot be disabled by operator settings, you will not be able to choose this menu item.

Handset lock

You can lock your phone. The following 4 lock functions are available.

When switching on: Locks the handset whenever the handset is switched on.

If USIM changed: Locks the handset when the phone's USIM card has been changed.

Immediate: Locks the handset immediately.

None: Deactivates the lock function. You are requested to enter the security code to confirm the selection.

To unlock the handset, you need to enter the security code.

Change codes

You can change the PIN, PIN2, and the mobile phone password.

PIN code

PIN is the abbreviation for Personal

Identification Number, and is used to restrict use by an unauthorised user.

PIN code change procedure

1. Select ‘PIN code’ from the ‘Change codes' list and then press O .

2. Enter the current PIN code, and press O .

3. Enter the new PIN code, and press O .

4. Enter the new PIN code once again, and press O .

v If the PIN code is different from that of step 3, the procedure is restarted from step 3.

5. When the PIN code is changed properly, a Changed message is displayed. If you enter an incorrect PIN code in step 2, the procedure is restarted from step

2, and the number of attempts you have left to enter the number decreased by 1.

6. Press the right soft key in the PIN code entry window to return to the previous step.

Note v Three incorrect PIN code entries in the PIN code entry window would invalidate the PIN code.

In this case, you have to enter the PUK (PIN Unblock Key) code to configure the PIN code again. The maximum number of times you may enter the PUK code is 10. (Note: If you enter an incorrect PUK code10 times, the

USIM card will be blocked and must be replaced.)

100

Settings

PIN2 code

PIN2 is the abbreviation for Personal

Identification Number 2, and is used to restrict use by unauthorised users as with the PIN. The PIN2 code change procedure is the same as the one for the PIN code. 3 incorrect

PIN2 code entries would invalidate the PIN2 code. In this case, you have to enter the PUK2 code in order to use the PIN2 code again.

The maximum number of times you may try to enter the PUK2 code is 10, like PUK1. 10 incorrect PUK2 code entries would invalidate the

PIN2 code.

Security code

The security code is used to change the mobile phone password. The maximum number of attempts to enter the security code is not limited as it is with PIN and PIN2.

Power save

(Menu #.2.5)

Decide whether to activate the power save mode or not.

Memory manager

(Menu #.2.6)

User memory

This function shows the status of the user memory of the mobile phone. Since this function scans the overall file system for statistics, a few seconds are required.

User reserved memory

This function shows the status of the User reserved memory.

The usual contents are Text msg,

Contacts, Calendar, Tasks, Memo,

Alarms, Call history, and Bookmarks.

And it gives a clear illustration of the actual amount compared with the total amount for each item.

USIM memory

This function shows the status of the USIM card user memory.

External memory

This function shows the status of the External card user memory. This function displays the In-use and free memory usage statistics.

Primary storage setting

(Menu #.2.8)

You can select the storage to download the file: Handset memory or External memory.

Handset Information

(Menu #.2.9)

This functions shows the USIM card telephone number, model name and software version of the mobile phone.

Reset settings

(Menu #.2.10)

Select this to reset your phone to its default configuration. You are requested to enter the security code.

Display settings

Menu #.3

This menu allows you to personalise the display options of the screens and of the menus entire graphic interface.

Main Display

(Menu #.3.1)

You can set the screen theme to be displayed on the main screen.

Home screen v Wallpaper: You can select an image to be displayed on the main screen.

v Display items: You can select which items to display on the screen: Clock, Clock + Key guide, Dual clock, Key guide ,

Do not show, Calendar+Clock or

Calendar v

Clock type: You can select the type of clock.

101

102

Settings v Clock font colour: You can select the colour of displaying the clock.

Start up picture

You can select the image to be displayed while the phone is being switched on.

Power off picture

You can select the image to be displayed while the phone is being switched off.

Menu style

(Menu #.3.2)

You can select the desired menu style from Grid style and List style.

Font

(Menu #.3.3)

You can set the font style, dialling font size, and dialling font colour using l / r .

Backlight

(Menu #.3.4)

You can set the backlight duration and the brightness on the Home screen and the duration on the

Keypad individually.

Handset theme

(Menu #.3.5)

Select the desired handset theme from White and Black."

Welcome message

(Menu #.3.6)

After selecting On, you can write a welcome message.

Call settings

Menu #.4

Call durations

(Menu #.4.1)

You can view call time by types.

Press the left soft key [Options] to choose either partial initialisation or entire initialisation. Initialization will require your Security code.

The following timers are available: v

All calls: Shows total call time.

Dialled calls: Shows outgoing call time.

v Received calls: Shows incoming call time.

v Last call: Shows the latest call time in units of hours/minutes/ seconds.

Call barring

(Menu #.4.2)

Call barring menus for Voice and

Video calls are provided.

The menu consists of Voice calls ,

Video calls and Deactivate all . The

Voice calls and Video calls menus have the following submenus.

The Call barring menu consists of All outgoing, Outgoing international, Outgoing international calls except home country, All incoming and Incoming when abroad submenus.

The All outgoing menu bars dialling all outgoing calls, the

Outgoing international menu bars dialling outgoing international calls, and the Outgoing international calls except home country menu bars dialling outgoing international calls except for the Home PLMN country. All incoming rejects all incoming calls and the Incoming when abroad menu rejects incoming calls when roaming.

Voice calls

Video calls

All outgoing

1. When O is selected, it receives the Barring password from user, and activates the barring service on the network. A requesting message and animation appears.

When the network answers, the result of the operation is displayed.

103

104

Settings

2. When the Options menu is selected, it activates the Outgoing calls menu. Select the Options menu from the soft menus on the lowest menu. Then Deactivate,

Deactivate all, View status and

Change password menus appear.

The Deactivate menu deactivates the barring service after the user's

Barring password is entered. The

Deactivate all menu deactivates all barring services configured in the network after the user's

Barring password has been entered. The View status menu enables users to view the current network configuration. Selecting

View status menu displays the Requesting message with animation and the result of the operation when the network answers. Change password menu enables users to change the current barring password.

Outgoing international

1. When O is selected, it operates in the same way as the Outgoing calls menu.

2. When the Options menu is selected, it activates and operates the International calls menu. It operates in the same way as the

Outgoing calls menu.

Outgoing international calls except home country

1. When O is selected, it operates in he same way as the Outgoing calls menu.

2. When the Options menu is selected – It activates and operates the International except home country menu. It operates in the same way as the

Outgoing calls menu.

All incoming

1. When O is selected, it operates in the same way as the Outgoing calls menu.

2. When the Options menu is selected, it activates and operates the Incoming calls menu. It operates in the same way as the

Outgoing calls menu.

Incoming when abroad

1. When O is selected, it operates in the same way as the Outgoing calls menu.

2. When the Options menu is selected, it activates and operates the Incoming calls when abroad menu. It operates in the same way as the Outgoing calls menu.

Deactivate all

You can select to deactivate all or not.

Fixed dial numbers

(Menu #.4.3) v

Turn on/off

- On: Select whether to activate

FDN ornot. PIN2 authentication is required.

- OFF: Select whether to activate

FDN ornot. PIN2 authentication is required.

FDN List: Displays the current

FDN list. You can edit, add, or delete fixed dial numbers. PIN2 authentication is requried to edit,add, or delete the list. And the configuration information is saved on the USIM. The information saved on the USIM is used when FDN restricts outgoing calls.

105

106

Settings

Data volume

(Menu #.4.4)

Allows you to check the sent, received and all data volume transferred.

Press the left soft key [Clear all] to choose entire initialization. You can also use the [Clear] for the initialization of the selected volume type. Initialization will require your

Security code.

Call costs

(Menu #.4.5)

1. This function displays the call costs of the Last call and All calls.

2. To initialise, press the centre key

[Edit] and enter the PIN2 code.

3. You can select either Units or Currency in Set call cost.

According to your setting, the call cost is displayed during a call

(If USIM and Network support

Advice Of Charge(AOC)).

4. In the Set limit configuration, select On to configure the cost limit. When a cost limit is configured, and the call costs reach the limit, making a call will not be allowed.

Diverts

(Menu #.4.6)

Call divert menus for voice and video calls are provided.

If you press O , you can activate call divert menu.

Voice calls

All voice calls

When busy

No answer

Not reachable

1. When the number list is not exsisted

Converts to an editor for entering a divert number. You can input the number to divert a call directly or search it in phonebook. If you press [Divert], the phone will send the request to service provider after entering the number. While waiting for the result from the network, a Requesting message and animation appears.

2. When the number list is exsisted

Displays To other number menu including of the number list.

While waiting for the result from the network, a Requesting message and animation appears.

3. Option menu

After activating All voice calls menu, selecting the Options menu at the bottom of the menus displays the Deactivate,

Deactivate all, View status and clear list menus.

The View status menu shows the settings on the network. If you select this menu, Requesting. message and animation appear.

Then the network settings are displayed when the information is received from the network.

If you select the Deactivate menu, the call divert numbers registered in the network are deleted after user confirmation.

Clear list menu will delete all divert number list.

107

108

Settings

Video calls

All video calls

1. When the number list is not exsisted

Converts to an editor for entering a divert number. You can input the number to divert a call directly or search it in phonebook. If you press O

[Divert], the phone will send the request to service provider after entering the number. While waiting for the result from the network, a Requesting message and animation appears.

2. When the number list is exsisted

Displays To other number menu including of the number list.

While waiting for the result from the network, a Requesting message and animation appears.

3. Option menu

After activating the All video calls menu, selecting the Options menu at the bottom of the menus displays the Deactivate, Deactivate all,

View status and clear list menus.

If you select the Deactivate menu, the call divert numbers registered in the network are deleted after user confirmation.

Selecting the Cancel all menu will display the operation result after showing the Requesting message and animation. Clear list menu will delete all divert number list.

When busy

1. When the number list is not exsisted