advertisement
Crosshair V
Formula Series
E6693
Second Edition
July 2011 ii
Copyright © 2011 ASUSTeK COMPUTER INC. All Rights Reserved.
No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COMPUTER INC. (“ASUS”).
Product warranty or service will not be extended if: (1) the product is repaired, modified or altered, unless such repair, modification of alteration is authorized in writing by ASUS; or (2) the serial number of the product is defaced or missing.
ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS
OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS
DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL,
INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS,
LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE),
EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY
DEFECT OR ERROR IN THIS MANUAL OR PRODUCT.
SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR
INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE,
AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO
RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS
MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT.
Products and corporate names appearing in this manual may or may not be registered trademarks or copyrights of their respective companies, and are used only for identification or explanation and to the owners’ benefit, without intent to infringe.
Contents
FCC Radio Frequency (RF) Exposure Caution Statement ..............vii
Declaration of Conformity (R&TTE directive 1999/5/EC) ................ viii
Wireless Operation Channel for Different Domains ..........................ix
France Restricted Wireless Frequency Bands ..................................ix
IC Radiation Exposure Statement for Canada ...................................x
Crosshair V Formula specifications summary........................................ xv
ROG ThunderBolt specifications summary.......................................... xviii
Chapter.1:.
Product.introduction
Welcome!....................................................................................... 1-1
Package.contents.......................................................................... 1-1
Special.features............................................................................. 1-2
1.3.1 Product highlights ........................................................... 1-2
1.3.2 ROG ThunderBolt LAN/Audio Combo ........................... 1-3
1.3.3 ROG Intelligent Performance & Overclocking features ... 1-4
1.3.4 ASUS special features .................................................... 1-7
Chapter.2:.
Hardware.information
Before.you.proceed...................................................................... 2-1
Motherboard.overview.................................................................. 2-2
2.2.1 Motherboard layout ......................................................... 2-2
2.2.2 Layout contents ............................................................... 2-3
2.2.3 Central Processing Unit (CPU) ....................................... 2-4
2.2.4 System memory .............................................................. 2-5
2.2.5 Expansion slots ............................................................. 2-12
2.2.6 Onboard LEDs .............................................................. 2-15
2.2.7 Jumpers ........................................................................ 2-19
2.2.8 Internal connectors ....................................................... 2-20
2.2.9 Onboard switches ......................................................... 2-29
2.2.10 ProbeIt .......................................................................... 2-32
Building.your.computer.system................................................ 2-33
2.3.1 Additional tools and components to build a PC system 2-33
iii
iv
Contents
2.3.2 CPU installation ............................................................ 2-34
2.3.3 CPU heatsink and fan assembly installation ................. 2-35
2.3.4 DIMM installation .......................................................... 2-38
2.3.5 Motherboard installation ................................................ 2-39
2.3.6 ATX Power connection .................................................. 2-41
2.3.7 SATA device connection ................................................ 2-42
2.3.8 Front I/O Connector ...................................................... 2-43
2.3.9 Expension Card installation .......................................... 2-44
2.3.10 ROG ThunderBolt Installation ....................................... 2-45
2.3.11 Rear panel connectors .................................................. 2-47
2.3.12 Audio I/O connections ................................................... 2-48
2.4 Starting up for the first time....................................................... 2-51
Turning.off.the.computer............................................................ 2-52
2.5.1 Using the OS shut down function .................................. 2-52
2.5.2 Using the dual function power switch ............................ 2-52
Chapter.3:.
BIOS.setup
Knowing.BIOS............................................................................... 3-1
BIOS.setup.program..................................................................... 3-1
3.2.1 EZ Mode ......................................................................... 3-2
3.2.2 Advanced Mode .............................................................. 3-3
Extreme.Tweaker.menu................................................................ 3-5
Main.menu................................................................................... 3-12
3.4.1 System Language [English] .......................................... 3-12
3.4.2 System Date [Day xx/xx/xxxx] ....................................... 3-12
3.4.3 System Time [xx:xx:xx] ................................................. 3-12
3.4.4 Security ......................................................................... 3-13
Advanced.menu.......................................................................... 3-15
3.5.1 CPU Configuration ........................................................ 3-16
3.5.2 North Bridge Configuration ........................................... 3-17
3.5.3 SATA Configuration ....................................................... 3-18
3.5.4 USB Configuration ........................................................ 3-20
3.5.5 CPU Core On/ Off Function .......................................... 3-22
3.5.6 Onboard Devices Configuration .................................... 3-23
3.5.7 APM .............................................................................. 3-25
3.5.8 iROG Configuration ....................................................... 3-26
Contents
3.5.9 ROG Connect ............................................................... 3-26
3.5.10 LED Control .................................................................. 3-27
Monitor.menu.............................................................................. 3-29
Boot.menu................................................................................... 3-33
Tools.menu.................................................................................. 3-35
3.8.1 ASUS EZ Flash 2 Utility ................................................ 3-35
3.8.2 ASUS SPD Information ................................................. 3-35
3.8.3 ASUS O.C. Profile ......................................................... 3-36
3.8.4 GO Button File .............................................................. 3-37
Exit.menu..................................................................................... 3-38
3.10.1 ASUS Update utility ...................................................... 3-40
3.10.2 ASUS EZ Flash 2 Utility ................................................ 3-43
3.10.3 ASUS BIOS Updater ..................................................... 3-45
Chapter.4:.
Software.support
Installing.an.operating.system.................................................... 4-1
Support.DVD.information............................................................. 4-1
4.2.1 Running the support DVD ............................................... 4-1
4.2.2 Drivers menu ................................................................... 4-2
4.2.3 Utilities menu .................................................................. 4-3
4.2.4 Make disk menu .............................................................. 4-4
4.2.5 Manual menu .................................................................. 4-4
4.2.6 Video menu ..................................................................... 4-5
4.2.7 ASUS Contact information .............................................. 4-5
4.2.8 Other information ............................................................ 4-6
Software.information.................................................................... 4-8
4.3.1 ASUS AI Suite II .............................................................. 4-8
4.3.2 Tool ................................................................................. 4-9
4.3.3 DIGI+ VRM .................................................................... 4-14
4.3.4 EPU ............................................................................... 4-18
4.3.5 FAN Xpert ..................................................................... 4-19
4.3.6 Probe II ......................................................................... 4-20
4.3.7 Sensor Recorder ........................................................... 4-22
4.3.8 ROG Connect ............................................................... 4-25
4.3.9 ROG ThunderBolt LAN ................................................. 4-28
v
vi
Contents
4.3.10 ThunderBolt Audio ........................................................ 4-31
4.3.11 Sound Blaster X-Fi MB 2 ............................................. 4-35
4.4 RAID configurations................................................................... 4-38
4.4.1 RAID definitions ............................................................ 4-38
4.4.2 Installing Serial ATA hard disks ..................................... 4-39
4.4.3 Setting the RAID item in BIOS ...................................... 4-39
4.4.4 AMD ® Option ROM Utility .............................................. 4-40
Creating.a.RAID.driver.disk........................................................ 4-43
4.5.1 Creating a RAID driver disk without entering the OS .... 4-43
4.5.2 Creating a RAID driver disk in Windows ® ...................... 4-43
4.5.3 Installing the RAID driver during Windows ®
OS installation ............................................................... 4-44
4.5.4 Using a USB floppy disk drive ....................................... 4-45
Chapter.5:.
Multiple.GPU.technology.support
ATI ® .CrossFireX™.technology..................................................... 5-1
5.1.1 Requirements .................................................................. 5-1
5.1.2 Before you begin ............................................................. 5-1
5.1.3 Installing CrossFireX graphics cards .............................. 5-2
5.1.4 Installing the device drivers ............................................. 5-3
5.1.5 Enabling the ATI ® CrossFireX™ technology ................... 5-3
NVIDIA ® .SLI™.technology............................................................ 5-5
5.2.1 Requirements .................................................................. 5-5
5.2.2 Installing two SLI-ready graphics cards .......................... 5-5
5.2.3 Installing the device drivers ............................................. 5-6
5.2.4 Enabling the NVIDIA ® SLI™ technology ......................... 5-6
Notices
Federal.Communications.Commission.Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
• This device may not cause harmful interference, and
• This device must accept any interference received including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with manufacturer’s instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
The use of shielded cables for connection of the monitor to the graphics card is required to assure compliance with FCC regulations. Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
FCC.Radio.Frequency.(RF).Exposure.Caution.Statement
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. “The manufacture declares that this device is limited to Channels 1 through 11 in the
2.4GHz frequency by specified firmware controlled in the USA.”
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. To maintain compliance with FCC RF exposure compliance requirements, please avoid direct contact to the transmitting antenna during transmitting. End users must follow the specific operating instructions for satisfying RF exposure compliance. vii
viii
RF.exposure.warning
This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
End-users and installers must be provide with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.
Declaration.of.Conformity.(R&TTE.directive.1999/5/EC)
The following items were completed and are considered relevant and sufficient:
• Essential requirements as in [Article 3]
• Protection requirements for health and safety as in [Article 3.1a]
• Testing for electric safety according to [EN 60950]
• Protection requirements for electromagnetic compatibility in [Article 3.1b]
• Testing for electromagnetic compatibility in [EN 301 489-1] & [EN 301 489-17]
• Effective use of the radio spectrum as in [Article 3.2]
• Radio test suites according to [EN 300 328-2]
CE.Marking
CE marking for devices without wireless LAN/Bluetooth
The shipped version of this device complies with the requirements of the EEC directives 2004/108/EC “Electromagnetic compatibility” and 2006/95/EC “Low voltage directive”.
CE marking for devices with wireless LAN/ Bluetooth
This equipment complies with the requirements of Directive 1999/5/EC of the
European Parliament and Commission from 9 March, 1999 governing Radio and
Telecommunications Equipment and mutual recognition of conformity.
Wireless.Operation.Channel.for.Different.Domains
N. America 2.412-2.462 GHz Ch01 through CH11
Japan 2.412-2.484 GHz Ch01 through Ch14
Europe ETSI 2.412-2.472 GHz Ch01 through Ch13
France.Restricted.Wireless.Frequency.Bands
Some areas of France have a restricted frequency band. The worst case maximum authorized power indoors are:
• 10mW for the entire 2.4 GHz band (2400 MHz–2483.5 MHz)
• 100mW for frequencies between 2446.5 MHz and 2483.5 MHz
Channels 10 through 13 inclusive operate in the band 2446.6 MHz to 2483.5
MHz.
There are few possibilities for outdoor use: On private property or on the private property of public persons, use is subject to a preliminary authorization procedure by the Ministry of Defense, with maximum authorized power of 100mW in the
2446.5–2483.5 MHz band. Use outdoors on public property is not permitted.
In the departments listed below, for the entire 2.4 GHz band:
• Maximum authorized power indoors is 100mW
• Maximum authorized power outdoors is 10mW
Departments in which the use of the 2400–2483.5 MHz band is permitted with an
EIRP of less than 100mW indoors and less than 10mW outdoors:
01 Ain 02 Aisne
08 Ardennes 09 Ariège
16 Charente 24 Dordogne
32 Gers 36 Indre
45 Loiret 50 Manche
59 Nord 60 Oise
64 Pyrénées Atlantique
67 Bas Rhin 68 Haut Rhin
75 Paris 82 Tarn et Garonne
88 Vosges 89 Yonne
94 Val de Marne
03 Allier
11 Aude
05 Hautes Alpes
12 Aveyron
25 Doubs 26 Drôme
37 Indre et Loire 41 Loir et Cher
55 Meuse
61 Orne
58 Nièvre
63 Puy du Dôme
66 Pyrénées Orientales
70 Haute Saône 71 Saône et Loire
84 Vaucluse
90 Territoire de Belfort
This requirement is likely to change over time, allowing you to use your wireless
LAN card in more areas within France. Please check with ART for the latest information (www.art-telecom.fr)
Your WLAN Card transmits less than 100mW, but more than 10mW.
ix
x
Canadian.Department.of.Communications.Statement
This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus set out in the Radio Interference Regulations of the
Canadian Department of Communications.
This class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du
Canada.
IC.Radiation.Exposure.Statement.for.Canada
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. To maintain compliance with IC RF exposure compliance requirements, please avoid direct contact to the transmitting antenna during transmitting. End users must follow the specific operating instructions for satisfying RF exposure compliance.
Operation is subject to the following two conditions:
• This device may not cause interference and
• This device must accept any interference, including interference that may cause undesired operation of the device.
To prevent radio interference to the licensed service (i.e. co-channel Mobile
Satellite systems) this device is intended to be operated indoors and away from windows to provide maximum shielding. Equipment (or its transmit antenna) that is installed outdoors is subject to licensing.
The user is cautioned that this device should be used only as specified within this manual to meet RF exposure requirements. Use of this device in a manner inconsistent with this manual could lead to excessive RF exposure conditions.
This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter.
Country Code selection feature to be disabled for products marketed to the US/
CANADA.
Safety information
Electrical.safety
• To prevent electrical shock hazard, disconnect the power cable from the electrical outlet before relocating the system.
• When adding or removing devices to or from the system, ensure that the power cables for the devices are unplugged before the signal cables are connected. If possible, disconnect all power cables from the existing system before you add a device.
• Before connecting or removing signal cables from the motherboard, ensure that all power cables are unplugged.
• Seek professional assistance before using an adapter or extension cord.
These devices could interrupt the grounding circuit.
• Ensure that your power supply is set to the correct voltage in your area. If you are not sure about the voltage of the electrical outlet you are using, contact your local power company.
• If the power supply is broken, do not try to fix it by yourself. Contact a qualified service technician or your retailer.
• The optical S/PDIF is an optional component (may or may not be included in your motherboard) and is defined as a CLASS 1 LASER PRODUCT.
INVISIBLE LASER RADIATION, AVOID EXPOSURE TO BEAM.
• Never dispose of the battery in fire. It could explode and release harmful substances into the environment.
• Never dispose of the battery with your regular household waste. Take it to a hazardous material collection point.
• Never replace the battery with an incorrect battery type.
• RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT
TYPE.
• DISPOSE OF USED BATTERIES ACCORDING TO THE ABOVE
BATTERY-RELATED INSTRUCTIONS.
xi
xii
Operation.safety
• Before installing the motherboard and adding devices on it, carefully read all the manuals that came with the package.
• Before using the product, ensure all cables are correctly connected and the power cables are not damaged. If you detect any damage, contact your dealer immediately.
• To avoid short circuits, keep paper clips, screws, and staples away from connectors, slots, sockets and circuitry.
• Avoid dust, humidity, and temperature extremes. Do not place the product in any area where it may become wet.
This motherboard should only be used in environments with ambient temperatures between 5ºC (41ºF) and 40ºC (104ºF).
• Place the product on a stable surface.
• If you encounter technical problems with the product, contact a qualified service technician or your retailer.
DO NOT throw the motherboard in municipal waste. This product has been designed to enable proper reuse of parts and recycling. This symbol of the crossed out wheeled bin indicates that the product (electrical and electronic equipment) should not be placed in municipal waste. Check local regulations for disposal of electronic products.
DO NOT throw the mercury-containing button cell battery in municipal waste.
This symbol of the crossed out wheeled bin indicates that the battery should not be placed in municipal waste.
About this guide
This user guide contains the information you need when installing and configuring the motherboard.
How.this.guide.is.organized
This guide contains the following parts:
•.
Chapter.1:.Product.introduction
This chapter describes the features of the motherboard and the new technology it supports.
•.
Chapter.2:.Hardware.information
This chapter lists the hardware setup procedures that you have to perform when installing system components. It includes description of the switches, jumpers, and connectors on the motherboard.
•.
Chapter.3:.BIOS.setup
This chapter tells how to change system settings through the BIOS Setup menus. Detailed descriptions of the BIOS parameters are also provided.
•.
Chapter.4:.Software.support
This chapter describes the contents of the support DVD that comes with the motherboard package and the software.
•.
Chapter.5:.Multiple.GPU.technology.support
This chapter describes how to install and configure multiple ATI ®
CrossFireX™ and NVIDIA ® SLI™ graphics cards.
Where to find more information
Refer to the following sources for additional information and for product and software updates.
1.. ASUS.websites
The ASUS website provides updated information on ASUS hardware and software products. Refer to the ASUS contact information.
2.. Optional.documentation
Your product package may include optional documentation, such as warranty flyers, that may have been added by your dealer. These documents are not part of the standard package.
xiii
xiv
Conventions.used.in.this.guide
To ensure that you perform certain tasks properly, take note of the following symbols used throughout this manual.
DANGER/WARNING: Information to prevent injury to yourself when trying to complete a task.
CAUTION: Information to prevent damage to the components when trying to complete a task.
IMPORTANT: Instructions that you MUST follow to complete a task.
NOTE: Tips and additional information to help you complete a task.
Typography
Bold text
Italics
<Key>
Indicates a menu or an item to select.
Used to emphasize a word or a phrase.
Keys enclosed in the less-than and greater-than sign means that you must press the enclosed key.
Example: <Enter> means that you must press the Enter or Return key.
<Key1+Key2+Key3> If you must press two or more keys simultaneously, the key names are linked with a plus sign (+).
Command
Example: <Ctrl+Alt+D>
Means that you must type the command exactly as shown, then supply the required item or value enclosed in brackets.
Example: At the DOS prompt, type the command line: afudos /iC5F.ROM
Crosshair V Formula specifications summary
CPU.
Chipset
System.Bus
Memory
Expansion.Slots
Multi-GPU.Technology
Storage
LAN
High Definition Audio
AMD socket for AM3+ FX™/Phenom™ II/Athlon™ II/
Sempron™ 100 Series Processors
Supports 32nm CPU, up to 8 cores
AMD Cool 'n' Quiet™ Technology
AMD 140W CPU Support
AMD ® 990FX / SB950
Up to 5200 MT/s HyperTransport™ 3.0
Dual channel memory architecture
4 x DIMM, max. 32GB, DDR3 2133(O.C.)/2000(O.
C.)/1800(O.C.)/1600/1333/1066 MHz, ECC and non-
ECC, un-buffered memory
*Refer to www.asus.com or user manual for the Memory
QVL (Qualified Vendors Lists)
**Due to OS limitation, when installing total memory of 4GB capacity or more, Windows 32-bit operation
system may only recognize less than 3GB. Hence, a total installed memory of less than 3GB is
recommended.
® system may only recognize less than 3GB. Hence, a
total installed memory of less than 3GB is recommended.
3 x PCIe 2.0 x16 slots (dual @ x16; x16 x8 x8)
1 x PCIe 2.0 x16 (x4 speed)
1 x PCIe 2.0 x1
1 x PCI 2.2
Supports 3-Way NVIDIA ®
Technology
SLI™ / AMD CrossFireX™
SB950.South.Bridge:
- 6 x SATA 6Gb/s ports with RAID 0, 1, 5, 10, red
ASMedia ® .controllers:
- 1 x SATA 6Gb/s port, red
- 1 x eSATA 6Gb/s port, red
Intel ® Ethernet Gigabit LAN
SupremeFX X-Fi 2 built-in 8-channel High Definition
Audio.CODEC
- EAX
- THX
- X-Fi ®
®
®
Advanced™ HD 5.0
TruStudio PRO™
Xtreme Fidelity™
- Creative ® ALchemy
- Supports Blu-ray audio layer content protection
- Supports 1 Optical S/PDIF out port at back I/O
- Supports Jack-sensing, Multi-streaming, Front
Panel Jack-Retasking
(continued on the next page) xv
xvi
Crosshair V Formula specifications summary
USB
ROG.Exclusive.
Overclocking.Features
Other.Special.Features
BIOS.Features
Manageability
Back.Panel.I/O.Ports
ASMedia ® .USB.3.0.controller
- 6 x USB 3.0/2.0 ports (4 at back I/O ; 2 at midboard)
AMD ® .SB950.chipset
- 12 x USB 2.0/1.1 ports (8 ports at back I/O, black+white, 4 ports at mid-board)
ROG.Connect
- RC Poster
- RC Remote
- RC Diagram
- GPU TweakIt
GPU.DIMM Post
BIOS Print
GameFirst
Extreme Tweaker
ROG.Extreme.Engine.Digi+
- 8+2 phase CPU power design
CPU Level Up
MemOK!
Intelligent.overclocking.tools:
- ASUS TPU
- O.C. Profile
Overclocking.Protection:
- COP EX (Component Overheat Protection - EX)
- Voltiminder LED
- ASUS C.P.R.(CPU Parameter Recall)
Core Unlocker
ASUS Fan Xpert
ASUS Q-Connector
ASUS Q-Shield
ASUS Q- LED (CPU, DRAM, VGA, Boot Device LEDs)
Ai Charger+
ASUS EZ Flash 2
ASUS MyLogo 3
32Mb Flash ROM, UEFI BIOS, PnP, DMI2.0, WfM2.0, SM
BIOS 2.5, ACPI2.0a Multi-Language BIOS
WOL by PME, WOR by PME, PXE
1 x PS/2 Keyboard/Mouse Combo port
1 x External SATA port
1 x LAN (RJ45) port
4 x USB 3.0/2.0 ports
8 x USB 2.0/1.1 ports (1 port can be switched to ROG
Connect)
1 x S/PDIF Out (Optical)
8-channel Audio I/O
1 x Clr CMOS switch
(continued on the next page)
Crosshair V Formula specifications summary
Internal.I/O.Connectors
Software
Form.Factor
1 x USB 3.0/2.0 connector supports additional 2 USB
3.0/2.0 ports
2 x USB 2.0/1.1 connectors support additional 4 USB
2.0/1.1 ports
7 x SATA 6Gb/s connectors (Red)
8 x Fan connectors: 2 x CPU / 3 x Chassis / 3x Optional
8 x ProbeIt measurement points
3 x Thermal sensor connectors
1 x SPDIF_out connector
1 x 24-pin ATX power connector
1 x 8-pin ATX 12V power connector
1 x 4-pin ATX 12V power connector
1 x EZ Plug connector (4-pin Molex Power connector)
1 x En/Dis-able Clr CMOS header
1 x CPU Level Up button
1 x ROG Connect switch
1 x START (Power on) button
1 x RESET button
1 x Go button
1 x Audio front panel (AAFP) header
1 x System panel connector
Drivers
Sound Blaster ® X-Fi 2 Utility
Kaspersky ® Anti-Virus
DAEMON Tools Pro Standard
ROG CPU-Z
ASUS Utilities
ATX Form Factor, 12”x 9.6” (30.5cm x 24.4cm)
*Specifications are subject to change without notice.
xvii
xviii
ROG ThunderBolt specifications summary
ThunderBolt.LAN/
Audio.Combo.Card
Dedicated.Network.Processing.Unit.(NPU)
- Advanced Game Detect™
- Visual Bandwidth Control™
- Application Blocking
- Online Gaming PC Monitor™
- Bandwidth Tester
- Game Networking DNA™
Built-in.2-Channel.High.Quality.DAC/ADC
- Output Signal-to-Noise Ratio (A-Weighted): 116dB
- Output THD+N at 1KHz: 105dB
- C-Media 6631 audio processor (Max. 192KHz/24-bit)
- TI 6120A2 high fidelity headphone amplifier
- Digital-to-Analog Converter: 120dB (Max. 192kHz/ 24-bit)
- Analog-to-Digital Converter: 114dB (Max. 192KHz/24-bit)
- Supports 3 Headphone Impedance Gain Modes (up to 300 ohms)
- Fine-tuned Game Genre EQ Profiles
- Xear™ Surround Headphone
- Xear™ SingFX
- Equalizer, Environment Effects, FlexBass, Smart Volume,
Virtual Speaker Shifter
- DS3D GX 1.0 OpenAL
- Front-panel audio connector (AAFP)
- Line-in, Line out, Optical S/PDIF out ports
- USB 2.0 Interface
*ROG.ThunderBolt.is.only.available.on.selected.models.
This chapter describes the motherboard features and the new technologies it supports.
Chapter 1:
1
introduction
Chapter summary
1
1.1.
Welcome!....................................................................................... 1-1
1.2.
Package.contents.......................................................................... 1-1
1.3.
Special.features............................................................................. 1-2
ROG Crosshair V Formula
1.1 Welcome!
Thank you for buying an ROG Crosshair V Formula motherboard!
The motherboard delivers a host of new features and latest technologies, making it another standout in the long line of ASUS quality motherboards!
Before you start installing the motherboard, and hardware devices on it, check the items in your package with the list below.
1.2 Package contents
Check your motherboard package for the following items.
Motherboard
Card
Cables
Accessories
Application DVD
Documentation
ROG Crosshair V Formula
*ROG ThunderBolt
1 x ROG Connect cable
1 x CrossFire Cable
1 x SLI Cable
3 x 2-in-1 SATA 6G cables
*1 x USB to USB cable for ThunderBolt
1 x 2-in-1 ASUS Q-Connector Kit
1 x 3-Way SLI Bridge
1 x Cable Ties Pack
1 x ROG Theme Label
1 x 12-in-1 ROG SATA Cable Label
1 x I/O Shield
ROG motherboard support DVD
User guide
*ROG ThunderBolt Audio Precision Test Report
If any of the above items is damaged or missing, contact your retailer.
*The ThunderBolt is only available on selected models.
ROG Crosshair V Formula 1-1
1-2
1.3 Special features
1.3.1.
Product.highlights
Republic.of.Gamers..
The Republic of Gamers consists only the best of the best. We offer the best hardware engineering, the fastest performance, the most innovating ideas, and we welcome the best gamers to join in. In the Republic of Gamers, mercy rules are only for the weak, and bragging rights means everything. We believe in making statements and we excel in competitions. If your character matches our trait, then join the elite club, make your presence felt, in the Republic of Gamers.
FX™/Phenom™.II/Athlon™.II/.Sempron™.100.Series.Processors.
(AM3+.CPU)..
.
This motherboard supports latest AMD ® Socket AM3+ multi-core processors with up to 8-core native CPU cores and delivers better overclocking capabilities with less power consumption. It features AMD Turbo CORE Technology 2.0 and accelerates data transfer rate up to 5200MT/s via HyperTransport™ 3.0 based system bus. This motherboard also supports AMD ® manufacturing process.
CPUs in the new 32nm
AMD.990FX.Chipset..
AMD 990FX Chipset is designed to support up to 5.2GT/s HyperTransport™
3.0 (HT 3.0) interface speed and dual PCI Express™ 2.0 x16 graphics. It is optimized with AMD latest AM3+ and multi-core CPUs to provide excellent system performance and overclocking capabilities.
DDR3.2133(O.C.).Support
This motherboard supports DDR3 2133(O.C.) that provides faster data transfer rate and more bandwith to increase memory computing efficiency, enhancing system performance in 3D graphics and other memory demanding applications.
Refer to www.asus.com for the supported CPU models.
Chapter 1: Product Introduction
SLI/CrossFireX.On-Demand..
Why.choose.when.you.can.have.both?
SLI or CrossFireX? Fret no longer because with the ROG Crosshair V Formula, you'll be able to run both multi-GPU setups. The board features SLI/CrossFireX on Demand technology, supporting SLI or CrossFireX configuration. Whichever path you take, you can be assured of jaw-dropping graphics at a level previously unseen.
PCIe.2.0..
Double.Speed;.Double.Bandwidth
This motherboard supports the latest PCIe 2.0 devices for double speed and bandwidth which enhances system performance.
1.3.2.
ROG.ThunderBolt.LAN/Audio.Combo..
Built-in.Headphone.Amp...
Sound.GREATER..
The ROG ThunderBolt is a dedicated LAN/audio combo card designed for gamers.
With the ROG ThunderBolt's high sound quality and built-in amp, gamers can discover the enemy's position much easier and react earlier, making it just like another weapon in a gamer's arsenal! With fine-tuned background sound effects for popular game types and Xear 3D Surround tech, ROG ThunderBolt lets you hear better and win easier!
Dedicated.NPU..
Play.FASTER
Even with a high-end CPU and GPU, FPS and MMORPGs can still become a laggy mess if the LAN performance sucks. Gamers yearn to keep gaming framerates solid. The ROG ThunderBolt has been designed from continual feedback from the PC gaming community. By enhancing the 2 key factors (Speed and Sound) that dominate your gaming experience, the advanced integration of the
LAN/Audio combo ThunderBolt offers higher throughput and decreased latency is about to bring the best in-game experience to you!
Note: Network Processing Unit (NPU)
ROG ThunderBolt is only available on selected models.
ROG Crosshair V Formula 1-3
1-4
1.3.3.
ROG.Intelligent.Performance.&.Overclocking.features
Extreme.Engine.Digi+.
Powerful.combination.of.analog.and.digital.design.elements
Extreme Engine Digi+ equipped with high performance digital VRM design can easily achieve the ultimate performance with adjustable CPU PWM frequency. It expedites heat dissipation and achieves better electric conduction keeping critical components reliable. Now you'll be able to push your spanking new CPU to the limit, hitting benchmark scores that others only dream of. Extreme Engine Digi+ balances the need for voltage and the desire for rock solid performance to bring the ultimate user experience.
ROG.Connect.
Plug.and.Overclock.-.Tweak.it.the.hardcore.way!
Monitor the status of your desktop PC and tweak its parameters in real-time via a notebook—just like a race car engineer—with ROG Connect. ROG Connect links your main system to a notebook through a USB cable, allowing you to view realtime POST code and hardware status readouts on your notebook, as well as make on-the-fly parameter adjustments at a purely hardware level. Diagram, power, reset button, flash BIOS through notebook. Refer to page 2-29 for details.
GameFirst.
The.speed.you.need.to.pwn
Low Internet latency allows you to frag more, and get fragged less. That's why
ROG has introduced GameFirst, a feature that manages the flow of traffic according to your needs so that you can still listen to online music, download and upload files, and engage in Internet chats without sacrificing the low ping times you need to pwn your opponents.
iROG..
Intelligent.multiple.control.at.hand
The iROG is a special IC which enables several ROG highlighted functions that gives users full disposal of the motherboard at any stage! This design allows advanced user control and management to be processed purely at a hardware level. iROG greatly increases fun during overclocking for PC enthusiasts and it offers system maintenance and management with more control and efficiency.
Chapter 1: Product Introduction
CPU.Level.Up..
A.simple.click.for.instant.upgrade!
Ever wish that you could have a more expansive CPU? Upgrade your CPU at no additional cost with ROG's CPU Level Up! Simply pick the processor you wanted to OC to, and the motherboard will do the rest! See the new CPU speed and enjoy that performance instantly. Overclocking is never as easy as this.
GPU.DIMM.Post..
Easily.check.the.status.of.your.graphics.cards.and.memory.in.the.BIOS!.
Notice potential problems even before you enter the OS! Overclockers can save valuable minutes in detecting component failure under extreme conditions. With
GPU.DIMM Post, quickly and easily check your graphics cards and memory
DIMMs status in the BIOS, potentially keeping that record-breaking overclock!
BIOS.Print..
One.click,.easily.share.your.BIOS.settings
ROG offers a whole new UEFI BIOS feature to handle the demands of an overclocking experience. Crosshair V Formula features ROG BIOS Print which allows users to easily share their BIOS settings to others with the press of a button.
The days of using a camera to take BIOS screenshot are over.
ProbeIt.
Get.all.hands-on.with.hardware-based.overclocking
ProbeIt takes the guesswork out of locating the motherboard’s measurement points, identifying them clearly in the form of 8 sets of detection points so you’ll know exactly where to get quick yet accurate readings using a multitester.
MemOK!..
Any.memory.is.A-OK!
Memory compatibility is among the top concerns when it comes to computer upgrades. Worry no more, MemOK! is the fastest memory booting solution today.
This remarkable memory rescue tool requires nothing but a push of a button to patch memory issues and get your system up and running in no time. The technology is able to determine failsafe settings that can dramatically improve system booting success.
ROG Crosshair V Formula 1-5
1-6
Extreme.Tweaker..
One.stop.performance.tuning.shop
Extreme Tweakers is the one stop shop to fine-tune your system to optimal performance. No matter if you're looking for frequency adjustment, over-voltage options, or memory timing settings, they're all here!
Voltiminder.LED..
Friendly.reminder.on.Voltage.Settings
In the pursuit of extreme performance, overvoltage adjustment is critical but risky. Acting as the "red zone" of a tachometer, the Voltiminder LED displays the voltage status for CPU, PCH, and Memory in a intuitive color-coded fashion. The voltiminder LED allows quick voltage monitoring for overclockers.
COP.EX..
Maximum OC with confidence with burn proof protection to chipsets and
GPU!.
The COP EX allows overclockers to increase chipset voltage without the worries of overheating. It can also be used to monitor and save an overheating GPU.
The COP EX allows more freedom and less constraint for maximum performance achievement.
Loadline.Calibration..
Optimal.power.boost.for.extreme.CPU.overclocking!
Maintaining ample voltage support for the CPU is critical during overclocking.
The Loadline Calibration ensures stable and optimal CPU voltage under heavy loading. It helps overclockers enjoy the motherboard's ultimate OC capabilities and benchmark scores.
Onboard.Switches..
No more shorting pins or moving jumpers
With an easy press during overclock, this exclusive onboard switch allows gamer to effortlessly fine-tune the performance without having to short the pins or moving jumpers!
Chapter 1: Product Introduction
SupremeFX.X-Fi.2.Built-in..
Play.with.ultra-real.cinematic.in-game.surround.sound!
SupremeFX X-Fi 2 delivers incredible gaming audio experiences to ROG die hards. It features EAX 5.0 and OpenAL for ultra-real cinematic in-game audio.
It even comes with THX TruStudio Pro, which makes games, music and movies sound way better! SupremeFX X-Fi 2 also implements gold-plated jacks and high quality capacitors to ensure high definition adventures in audio.
1.3.4.
ASUS.special.features
ASUS.TPU..
The.Ultimate.O.C..Processor
Unleash your performance with ASUS’ simple onboard switch or AI Suite II utility.
The TPU chip offers precise voltage control and advanced monitoring through Auto
Tuning and TurboV functions. Auto Tuning offers a user friendly way to automtically optimize the system for fast, yet stable clock speeds, while TurboV enables unlimited freedom to adjust CPU frequencies and ratios for optimized performance in diverse situations.
USB.3.0.Support..
10X.Faster.Date.Rates!
Experience ultra-fast data transfers at 4.8Gbps with USB 3.0—the latest connectivity standard. Built to connect easily with next generation components and peripherals, USB 3.0 transfers data 10X faster and is also backward compatible with USB 2.0 components.
SATA.6Gb/s.Support..
Experience.the.Future.of.Storage!
Supporting next-generation Serial ATA (SATA) storage interface, this motherboard delivers up to 6Gb/s data transfer rates. Additionally, get enhanced scalability, faster data retrieval, double the bandwidth of current bus systems.
ROG Crosshair V Formula 1-7
ASUS.Fan.Xpert
ASUS Fan Xpert intelligently allows you to adjust both the CPU and chassis fan speeds according to different ambient temperatures caused by different climate conditions in different geographic regions and your PC’s loading. The built-in variety of useful profiles offer flexible controls of fan speed to achieve a quiet and cool environment.
ASUS.Q-Connector..
Make.connections.quick.and.accurate
The Q-Connector allows you to connect or disconnect chassis front panel cables in one easy step with one complete module. This unique adapter eliminates the trouble of plugging in one cable at a time, making connection quick and accurate.
Kaspersky
®
.Anti-Virus..
The.best.protection.from.viruses.and.spyware
Kaspersky ® Anti-Virus Personal offers premium antivirus protection for individual users and home offices. It is based on advanced antivirus technologies. The product incorporates the Kaspersky ® Anti-Virus engine, which is renowned for malicious program detection rates that are among the industry's highest.
1-8 Chapter 1: Product Introduction
This chapter lists the hardware setup procedures that you have to perform when installing system components. It
Chapter 2:
2
information
Chapter summary
2
Before.you.proceed...................................................................... 2-1
Motherboard.overview.................................................................. 2-2
Building.your.computer.system................................................ 2-32
2.4 Starting up for the first time....................................................... 2-50
Turning.off.the.computer............................................................ 2-51
ROG Crosshair V Formula
2.1 Before you proceed
Take note of the following precautions before you install motherboard components or change any motherboard settings.
• Unplug the power cord from the wall socket before touching any component.
• Before handling components, use a grounded wrist strap or touch a safely grounded object or a metal object, such as the power supply case, to avoid damaging them due to static electricity.
• Hold components by the edges to avoid touching the ICs on them.
• Whenever you uninstall any component, place it on a grounded antistatic pad or in the bag that came with the component.
• Before you install or remove any component, ensure that the ATX power supply is switched off or the power cord is detached from the power supply. Failure to do so may cause severe damage to the motherboard, peripherals, or components.
ROG Crosshair V Formula 2-1
2.2 Motherboard overview
2.2.1.
Motherboard.layout
2-2 Chapter 2: Hardware information
2.2.2.
Layout.contents
9.
10.
11.
12.
13.
4.
5.
6.
7.
8.
14.
15.
16.
17.
18.
Connectors/Jumpers/Switches/Slots
1. 8-pin/4-pin ATX 12V power connectors; EZ PLUG
2.
3.
AMD AM3+ CPU Socket
CPU, chassis, and optional fan connectors (4-pin CPU_FAN; 4-pin
CPU_OPT; 4-pin CHA_FAN1–3; 4-pin OPT_FAN1–3)
DDR3 DIMM slots
Go button
Thermal sensor cable connectors (2-pin OPT_TEMP1–3)
USB3.0 connectors (18-1 pin USB3_56)
AMD SB950 Serial ATA connectors (7-pin SATA6G 1-6)
Asmedia Serial ATA 6Gb/s connectors (7-pin SATA6G_E1)
Clear RTC RAM (3-pin CLRTC_SW)
System panel connector (20-8 pin PANEL)
USB 2.0 connectors (10-1 pin USB910, USB1112)
Reset switch
Power-on switch
CPU Level Up switch
Front panel audio connector (10-1 pin AAFP)
Digital audio connector (4-1 pin SPDIF_OUT)
ROG connect switch (3-pin ROG)
Page
2-25
2-4
2-22
2-20
2-18
2-26
2-20
2-28
2-5
2-29
2-23
2-21
2-19
2-28
2-30
2-24
2-23
2-29
Refer to 2.2.8 and 2.3.11 for more information about internal and rear panel connectors.
ROG Crosshair V Formula 2-3
2.2.3.
Central.Processing.Unit.(CPU)
The motherboard comes with an AM3+ socket designed for AMD® Next
Generation CPU up to 8-core, also compatible with AMD® socket AM3 for AMD®
Phenom™ II/Athlon™ II/ Sempron™ 100 Series Processors.
Ensure that all power cables are unplugged before installing the CPU.
Ensure that you use a CPU designed for the AM3+/AM3 socket. The CPU fits in only one correct orientation. DO NOT force the CPU into the socket to prevent bending the connectors on the socket and damaging the CPU!
2-4 Chapter 2: Hardware information
2.2.4.
System.memory
The motherboard comes with four Double Data Rate 3 (DDR3) Dual Inline Memory
Modules (DIMM) slots.
A DDR3 module is notched differently from a DDR or DDR2 module. DO NOT install a DDR or DDR2 memory module to the DDR3 slot.
ROG Crosshair V Formula 2-5
2-6
Memory configurations
You may install 512MB, 1GB, 2GB, 4GB, and 8GB unbuffered ECC and non-ECC
DDR3 DIMMs into the DIMM sockets.
• You may install varying memory sizes in Channel A and Channel B. The system maps the total size of the lower-sized channel for the dual-channel configuration. Any excess memory from the higher-sized channel is then mapped for single-channel operation.
• We recommend that you install the memory modules from the red slots for better overclocking capability.
• Always install DIMMs with the same CAS latency. For optimum compatibility, we recommend that you obtain memory modules from the same vendor.
• When overclocking, some AMD CPU models may not support DDR3 1600 or higher frequency DIMMs.
• Due to the memory address limitation on 32-bit Windows OS, when you install 4GB or more memory on the motherboard, the actual usable memory for the OS can be about 3GB or less. For effective use of memory, we recommend that you do any of the following:
- Use a maximum of 3GB system memory if you are using a 32-bit
Windows OS.
- Install a 64-bit Windows OS when you want to install 4GB or more on the motherboard.
For more details, refer to the Microsoft® support site at http://support.microsoft.com/kb/929605/en-us.
• This motherboard does not support DIMMs made up of 512Mb (64MB) chips or less (Memory chip capacity counts in Megabit, 8 Megabit/Mb = 1
Megabyte/MB).
• The default memory operation frequency is dependent on its Serial
Presence Detect (SPD), which is the standard way of accessing information from a memory module. Under the default state, some memory modules for overclocking may operate at a lower frequency than the vendor-marked value. To operate at the vendor-marked or at a higher frequency, refer to section 3.3 Extreme Tweaker menu for manual memory frequency adjustment.
• For system stability, use a more efficient memory cooling system to support a full memory load (4 DIMMs) or overclocking condition.
Chapter 2: Hardware information
Crosshair V Formula Motherboard Qualified Vendors Lists (QVL).
DDR3.1066.MHz.capability
Vendors Part.No.
Crucial
Crucial
Crucial
Crucial
Crucial
Crucial
ELPIDA
ELPIDA
CT12864BA1067.8FF
CT12864BA1067.8SFD
CT12872BA1067.9FF
CT25664BA1067.16FF
CT25664BA1067.16SFD
CT25672BA1067.18FF
EBJ10UE8BAW0-AE-E
EBJ10UE8EDF0-AE-F
ELPIDA
ELPIDA
Hynix
Hynix
EBJ21UE8BAW0-AE-E
EBJ21UE8EDF0-AE-F
HMT112U6AFP8C-G7N0
HMT125U6AFP8C-G7N0
Hynix
Kingston
HYMT125U64ZNF8-G7
KVR1066D3N7/1G
Kingston KVR1066D3N7/2G
KINGSTON KVR1066D3N7K2/4G
SAMSUNG
Elixir
Elixir
M378B5273BH1-CF8
M2Y2G64CB8HC5N-BE
M2Y2G64CB8HC9N-BE
Size
SS/
DS Chip.Brand Chip.NO.
Timing
1GB
1GB
1GB
2GB
2GB
2GB
1GB
1GB
2GB
2GB
1GB
2GB
2GB
1GB
DS HYNIX
SS Kingston
2GB DS Elpida J1108BDSE-DJ-F
4GB(2 x 2GB ) DS KINGSTON D1288JELDNGD9U
4GB
2GB
2GB
SS MICRON
SS MICRON
SS MICRON
DS MICRON
DS MICRON
DS MICRON
SS ELPIDA
SS ELPIDA
DS ELPIDA
DS ELPIDA
SS HYNIX
DS HYNIX
DS SAMSUNG
DS Elixir
DS -
D9KPT
D9JNL
D9KPT(ECC)
D9KPT
D9JNL
D9KPT(ECC)
J1108BABG-DJ-E
J1108EDSE-DJ-F
J1108BABG-DJ-E
J1108EDSE-DJ-F
H5TQ1G83AFPG7C
H5TQ1G83AFPG7C
HY5TQ1G831ZNFP-G7 7
D1288JPNDPLD9U
-
K4B2G0846B-HCF8
N2CB1G80CN-BE
-
-
-
8
-
7
7
7
7
7
7
7
7
7
-
7
7
7
Voltage
-
1.5
1.5
1.5
-
-
-
-
-
-
1.5
-
-
-
-
-
-
-
-
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
DIMM.socket.
support.(Optional)
•
2.DIMM 4.DIMM
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Crosshair V Formula Motherboard Qualified Vendors Lists (QVL).
DDR3.1333.MHz.capability
Vendors
G.SKILL
G.SKILL
G.SKILL
G.SKILL
GEIL
GEIL
GEIL
GEIL
GEIL
GEIL
Hynix
A-DATA
A-DATA
A-DATA
Apacer
Apacer
Apacer
CORSAIR
CORSAIR
CORSAIR
Crucial
Crucial
Crucial
Crucial
ELPIDA
ELPIDA
ELPIDA
ELPIDA
G.SKILL
G.SKILL
Part.No.
Size Chip.Brand Chip.NO.
Timing
AD63I1B0823EV
AXDU1333GC2G9(XMP)
SU3U1333W8G9-B
78.01GC6.9L0
2GB
2GB
8GB
1GB
78.A1GC6.9L1
78.B1GDE.9L10C
2GB
4GB
DS
DS
TW3X4G1333C9A 4GB (2 x 2GB ) DS
CMX8GX3M2A1333C9(XMP) 8GB (2 x 4GB ) DS
SS
SS
DS
SS
CMX8GX3M4A1333C9
CT12864BA1339.8FF
8GB (4 x 2GB) DS
1GB
BL25664BN1337.16FF(XMP) 2GB
CT25664BA1339.16FF
SS
DS
CT25672BA1339.18FF
EBJ10UE8BDF0-DJ-F
EBJ10UE8EDF0-DJ-F
EBJ20UF8BCF0-DJ-F
EBJ21UE8BDF0-DJ-F
F3-10600CL9D-4GBNT
F3-10666CL8D-
4GBHK(XMP)
F3-10666CL7D-
4GBRH(XMP)
F3-10666CL8D-
4GBECO(XMP)
F3-10666CL9D-8GBRL
F3-10666CL9D-8GBRL
GET316GB1333C9QC
GG34GB1333C9DC
GB34GB1333C7DC
GG34GB1333C9DC
GV34GB1333C7DC
GVP38GB1333C7QC
HMT112U6TFR8A-H9
2GB
2GB
1GB
1GB
2GB
2GB
4GB (2 x 2GB ) DS
DS
DS
SS
SS
SS
DS
4GB (2 x 2GB ) DS
4GB (2 x 2GB) DS
4GB (2 x 2GB) DS
8GB (2 x 4GB ) DS
8GB (2 x 4GB) DS
16GB (4 x 4GB) DS
4GB (2 x 2GB) DS
4GB (2 x 2GB) DS
4GB (2 x 2GB) DS
4GB (2 x 2GB) DS
8GB (4 x 2GB) DS
1GB SS
-
-
-
-
-
-
-
-
A-DATA
Elpida
Apacer
Apacer
Apacer
MICRON
MICRON
MICRON
ELPIDA
ELPIDA
Elpida
ELPIDA
G.SKILL
-
-
-
GEIL
-
-
GEIL
GEIL
Hynix
-
-
-
-
-
-
-
-
-
-
-
-
3CCA-1509A
J4208BASE-DJ-F
AM5D5808DEJSBG
AM5D5808FEQSBG
AM5D5908CEHSBG
D9KPT
D9KPT
D9KPT(ECC)
J1108BDSE-DJ-F
J1108EDSE-DJ-F
J2108BCSE-DJ-F
J1108BDSE-DJ-F
D3 128M8CE9 2GB
GL1L128M88BA12N
H5TC1G83TFR
(DDR3 1333 MHz continued on next page)
8-8-8-21
7-7-7-21
8-8-8-24
9-9-9-24
9-9-9-24
9-9-9-24
GL1L128M88BA115FW 9-9-9-24
GL1L128M88BA15FW 7-7-7-24
9-9-9-24
7-7-7-24
-
7-7-7-24
9
9
-
9-9-9-24
9
9
9-9-9-24
9-9-9-24
-
-
-
9
9-9-9-24
9
7-7-7-24
9
-
9-9-9-24
1.5
1.35
-
1.5
1.3
1.5
1.5
1.5
1.5
1.5
1.3
-
-
-
-
-
1.5
-
-
1.5
1.5
-
1.5
-
1.65
Voltage
-
-
-
1.25~1.35 •
•
•
•
•
•
•
•
•
•
•
• support.
(Optional)
•
2.DIMM 4.DIMM
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
1.5
• •
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
ROG Crosshair V Formula 2-7
KINGTIGER KTG2G1333PG3
Patriot
Patriot
Silicon
Power
Silicon
Power
Silicon
Power
Silicon
Power
Team
Team
Team
Team
Hynix
Hynix
Hynix
Hynix
KINGMAX
KINGMAX
KINGMAX
Kingston
Kingston
HMT325U6BFR8C-H9
HMT125U6BFR8C-H9
HMT125U6TFR8A-H9
HMT351U6BFR8C-H9
FLFE85F-C8KM9
FLFE85F-B8KL9
FLFF65F-C8KM9
KVR1333D3N9/1G
KVR1333D3N9/2G
KHX1333C9D3UK2/
Kingston
4GX(XMP)
KINGSTON KVR1333D3N9K2/4G
MICRON
MICRON
MICRON
MICRON
OCZ
OCZ
OCZ
OCZ
OCZ
PSC
PSC
PSC
MT4JTF12864AZ-1G4D1
MT8JTF25664AZ-1G4D1
MT8JTF25664AZ-1G4D1
MT16JTF51264AZ-1G4D1
OCZ3P1333LV3GK
OCZ3G1333LV4GK
OCZ3P1333LV4GK
OCZ3G1333LV8GK
OCZ3G1333LV8GK
PC310600U-9-10-A0
AL8F8G73D-DG1
PC310600U-9-10-B0
SAMSUNG M378B2873EH1-CH9
SAMSUNG M378B2873FHS-CH9
SAMSUNG M378B5773DH0-CH9
SAMSUNG M378B5673FH0-CH9
2GB
2GB
2GB
4GB
2GB
2GB
4GB
1GB
2GB
4GB (2 x 2GB) DS
SAMSUNG M378B5273BH1-CH9
SAMSUNG M378B5273CH0-CH9
SAMSUNG M378B5273DH0-CH9
SAMSUNG M378B1G73AH0-CH9
1GB
2GB
2GB
4GB
4GB
4GB
8GB
Transcend TS256MLK64V3N (566577) 2GB
Transcend TS256MLK64V3N (574206) 2GB
Transcend TS512MLK64V3N (389889) 4GB
Transcend TS512MLK64V3N (574831) 4GB
ACTICA
ACTICA
ACTICA
ACTICA
ACTICA
ACTICA
ACTICA
ACTICA
BUFFALO
ACT1GHU64B8F1333S
ACT1GHU72C8G1333S
ACT2GHU64B8G1333M
ACT2GHU64B8G1333S
BUFFALO
BUFFALO
BUFFALO
EK Memory EKM324L28BP8-I13
Elixir
Elixir
GoodRam
ACT2GHU72D8G1333M
ACT2GHU72D8G1333S
ACT4GHU64B8H1333H
ACT4GHU72D8H1333H
D3U1333-1G
FSH1333D3G-T3G(XMP)
D3U1333-2G
D3U1333-4G
M2F2G64CB88B7N-CG
M2F4G64CB8HB5N-CG
GR1333D364L9/2G
1GB
1GB
2GB
2GB
2GB
2GB
4GB
4GB
1GB
3GB(3 x 1GB)
2GB
4GB
4GB(2 x 2GB)
2GB
4GB
2GB
4GB (2 x 2GB) DS
1GB
2GB
2GB
4GB
SS
SS
SS
DS
3GB (3 x 1GB) SS
4GB (2 x 2GB) DS
4GB (2 x 2GB) DS
8GB (2 x 4GB) DS
8GB (2 x 4GB) DS
1GB
2GB
2GB
1GB
SS
DS
DS
SS
DS
DS
DS
SS
SS
SS
DS
DS
SS
DS
DS
SS
SS
DS
DS
SS
DS
DS
DS
DS
DS
DS
SS
SS
DS
DS
DS
SS
DS
DS
SS
DS
SS
DS
DS
DS
KINGTIGER F10DA2T1680 2GB
PSD32G13332
PGS34G1333LLKA
SP001GBLTE133S01
SP001GBLTU1333S01
SP002GBLTE133S01
SP002GBLTU133S02
TXD31024M1333C7(XMP)
2GB
2GB
4GB(2 x 2GB)
1GB
1GB
2GB
2GB
1GB
TXD31048M1333C7-D(XMP) 1GB
TXD32048M1333C7-D(XMP) 2GB
TXD32048M1333C7-D(XMP) 2GB
DS
DS
DS
DS
SS
SS
DS
DS
SS
SS
DS
DS
(DDR3 1333 MHz continued)
-
Hynix
Hynix
Hynix
Hynix
Kingmax
KINGMAX
Kingmax
Elpida
Kingston
-
H5TQ2G83BFR
H5TQ1G83BFRH9C
H5TC1G83TFR
H5TQ2G83BFR
KFC8FNMXF-BXX-15A -
KFB8FNLXL-BNF-15A -
KFC8FNMXF-BXX-15A -
J1108BDSE-DJ-F
D1288JPNDPLD9U
9
9
-
-
-
9
9
-
-
Hynix
Micron
Hynix
Micron
Samsung
Samsung
Micron
Samsung
Micron
Samsung
Hynix
Hynix
-
Elpida
Elpida
NANYA
-
Elixir
Elixir
Qimonda
-
-
-
-
KINGSTON D1288JEMFPGD9U
Micron
Micron
Micron
-
Micron
PSC
PSC
PSC
-
-
-
D9LGQ
D9LGK
-
-
D9LGK
D9LGK
A3P1GF3FGF
A3P1GF3DGF
A3P1GF3FGF
SAMSUNG K4B1G0846E
SAMSUNG K4B1G0846F
Samsung K4B2G08460
SAMSUNG K4B1G0846F
SAMSUNG K4B2G0846B-HCH9
SAMSUNG K4B2G0846C
Samsung K4B2G08460
SAMSUNG K4B4G0846A-HCH9
-
H5TQ2G83BFR
D9LGK
H5TQ2G83BFR
D9LGK
K4B1G0846F
K4B1G0846F(ECC)
D9KPT
K4B1G0846F
D9KPT(ECC)
K4B1G0846F(ECC)
H5TQ2G83AFR
H5TQ2G83AFR(ECC)
J1108BFBG-DJ-F
J1108BFBG-DJ-F
NT5CB256M8BN-CG
-
N2CB2G808N-CG
N2CB2G808N-CG
IDSH1G-03A1F1C-13H -
-
-
9
-
-
-
-
-
-
7-7-7-20
-
-
-
-
-
-
9-9-9
9-9-9
-
-
-
-
-
7-7-7
9-9-9
7-7-7
-
-
-
9
9
9
-
9
-
9
-
K4B2G0846C -
-
-
-
-
-
-
-
-
-
-
-
-
1.65
1.65
-
-
-
1.5
-
1.65
1.65
1.65
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Prtriot
NANYA
-
-
C9
PM128M8D3BU-15
NT5CB128M8AN-CG
-
-
-
9
7-7-7-20
-
-
-
-
1.7
-
-
-
1.5
1.5
-
-
-
-
1.25
NANYA
NANYA
Team
Team
Team
Team
NT5CB128M8AN-CG
NT5CB128M8AN-CG
S-POWER I0YT3E0
T3D1288LT-13
T3D1288LT-13
T3D1288LT-13
T3D1288LT-13
-
-
9
7-7-7-21
7-7-7-21
7-7-7-21
7-7-7-21
-
-
-
1.75
1.75
1.5-1.6
1.5-1.6
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
2-8 Chapter 2: Hardware information
Crosshair V Formula Motherboard Qualified Vendors Lists (QVL).
DDR3.1600.MHz.capability
Vendors Part.No.
Size
SS/
DS
Chip.
Brand
CORSAIR
CORSAIR
CORSAIR
Crucial
Crucial
G.SKILL
G.SKILL
G.SKILL
G.SKILL
G.SKILL
G.SKILL
G.SKILL
G.SKILL
G.SKILL
G.SKILL
G.SKILL
A-DATA
A-DATA
CORSAIR
CORSAIR
CORSAIR
CORSAIR
CORSAIR
CORSAIR
CORSAIR
CORSAIR
CORSAIR
CORSAIR
CORSAIR
CORSAIR
CORSAIR
CORSAIR
GEIL
GEIL
GEIL
GEIL
KINGMAX
GUP34GB1600C7DC(XMP)
GVP38GB1600C8QC(XMP)
FLGD45F-B8MF7(XMP)
16GB (4 x 4GB ) DS -
4GB (2 x 2GB )
4GB (2 x 2GB )
8GB (4 x 2GB )
1GB
DS -
DS -
DS -
SS -
KINGSTON KHX1600C9D3K3/12GX(XMP) 12GB (3 x 4GB ) DS N/A
KINGSTON KHX1600C9D3K6/24GX(XMP) 24GB (6 x 4GB ) DS -
KINGSTON KHX1600C7D3K2/4GX(XMP) 4GB (2 x 2GB )
4GB (2 x 2GB )
DS -
DS -
DS -
DS -
Kingston
Kingston
Kingston
OCZ
OCZ
OCZ
OCZ
AX3U1600GC4G9(XMP)
AX3U1600XC4G79(XMP)
KINGSTON KHX1600C9D3K3/6GX(XMP)
KHX1600C9D3T1BK3/
6GX(XMP)
OCZ3G16004GK
OCZ3BE1600C8LV4GK
OCZ3OB1600LV4GK
OCZ3X1600LV4GK(XMP)
OCZ
OCZ
OCZ3G1600LV6GK
OCZ3X1600LV6GK(XMP)
OCZ OCZ3X1600LV6GK(XMP)
Super Talent WP160UX4G8(XMP)
Super Talent WP160UX4G9(XMP)
Super Talent WB160UX6G8(XMP)
Super Talent WB160UX6G8(XMP)
AEXEA
AEXEA
AXA3PS2G1600S18V(XMP)
AXA3PS4GK1600S18V(XMP)
4GB
4GB
DS -
DS -
HX3X12G1600C9(XMP) 12GB (6 x 2GB ) DS -
CMZ16GX3M4A1600C9(XMP) 16GB (4 x 4GB ) DS -
CMG4GX3M2A1600C6
CMD4GX3M2B1600C8
CMG4GX3M2A1600C6
CMX4GX3M2A1600C8(XMP)
CMD4GX3M2A1600C8(XMP)
CMG4GX3M2A1600C7(XMP)
CMX4GX3M2A1600C9(XMP)
CMP6GX3M3A1600C8(XMP)
CMP6GX3M3A1600C8(XMP)
CMX6GX3M3C1600C7(XMP)
TR3X6G1600C8D(XMP)
CMP8GX3M2A1600C9(XMP)
CMZ8GX3M2A1600C8(XMP)
CMZ8GX3M2A1600C9(XMP)
CMX8GX3M4A1600C9(XMP)
BL12864BN1608.8FF(XMP)
4GB (2 x 2GB )
4GB (2 x 2GB )
4GB (2 x 2GB )
4GB (2 x 2GB )
4GB (2 x 2GB)
4GB (2 x 2GB)
4GB (2 x 2GB)
6GB (3 x 2GB )
6GB (3 x 2GB )
6GB (3 x 2GB )
6GB (3 x 2GB)
8GB (2 x 4GB )
8GB (2 x 4GB )
8GB (2 x 4GB )
8GB (4 x 2GB)
2GB (2 x 1GB )
BL25664BN1608.16FF(XMP)
F3-12800CL9D-4GBNQ(XMP)
2GB
4GB (2 x 2GB )
F3-12800CL7D-4GBECO(XMP) 4GB (2 x 2GB)
F3-12800CL7D-4GBRH(XMP)
F3-12800CL8D-4GBRM(XMP)
4GB (2 x 2GB)
4GB (2 x 2GB)
F3-12800CL9D-4GBECO(XMP) 4GB (2 x 2GB)
F3-12800CL8T-6GBPI(XMP)
F3-12800CL7D-8GBRH(XMP)
F3-12800CL7D-8GBXH(XMP)
F3-12800CL9D-8GBRL(XMP)
6GB (3 x 2GB)
8GB (2 x 4GB )
8GB (2 x 4GB )
8GB (2 x 4GB )
F3-12800CL9D-8GBSR2(XMP) 8GB (2x 4GB )
F3-12800CL8D-8GBECO(XMP) 8GB (2x4GB )
GET316GB1600C9QC(XMP)
GE34GB1600C9DC(XMP)
KINGSTON KHX1600C8D3K2/4GX(XMP)
KINGSTON KHX1600C9D3K2/4GX(XMP)
KINGSTON KHX1600C9D3K2/4GX(XMP)
KHX1600C9D3LK2/4GX(XMP) 4GB (2 x 2GB )
KHX1600C9D3X1K2/4G
4GB (2 x 2GB )
4GB (2 x 2GB )
4GB (2 x 2GB )
KINGSTON KHX1600C9D3X2K2/4GX(XMP) 4GB (2 x 2GB )
6GB (3 x 2GB )
6GB (3 x 2GB )
KINGSTON KHX1600C9D3T1K3/6GX(XMP) 6GB (3 x 2GB )
4GB (2 x 2GB )
4GB (2 x 2GB )
4GB (2 x 2GB)
4GB (2 x 2GB)
6GB (3 x 2GB)
6GB (3 x 2GB)
6GB (3 x 2GB)
4GB (2 x 2GB)
4GB (2 x 2GB)
6GB (3 x 2GB)
6GB (3 x 2GB)
2GB
4GB (2 x 2GB )
DS -
DS -
DS -
DS -
DS -
DS -
DS -
SS -
DS -
DS -
DS -
DS -
DS -
DS -
DS -
DS -
DS -
DS -
DS -
DS -
DS -
DS -
DS -
DS -
DS -
DS -
DS -
DS -
DS -
DS -
DS -
DS -
DS -
DS -
DS -
DS -
DS -
DS -
DS -
DS -
DS -
DS -
DS -
DS -
DS -
DS -
DS -
Asint SLZ3128M8-EGJ1D(XMP) 2GB DS Asint
Chip.NO.
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
3128M8-
GJ1D
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
(DDR3 1600 MHz continued on next page)
-
9
-
8
8
9
-
-
-
8-8-8
8-8-8
9-9-9
8-8-8
8-8-8
8-8-8
8-8-8
Timing
-
-
-
8
-
9
-
-
9
9
Voltage
9-9-9-24 1.55~1.75 •
2.DIMM
7-9-7-21 1.55~1.75 •
9-9-9-24 1.6
9-9-9-24 1.5
6-6-6-18 1.65
8-8-8-24 1.65
•
•
•
6-6-6-18 1.65
8-8-8-24 1.65
8-8-8-24
7-7-7-20
1.65
1.65
9-9-9-24 1.65
8-8-8-24 1.65
8-8-8-24 1.65
7-8-7-20 1.65
8-8-8-24 1.65
9-9-9-24 1.65
8-8-8-24 1.5
9-9-9-24 1.5
9-9-9-24 1.65
8-8-8-24 1.65
8-8-8-24 1.65
9-9-9-24 1.5
7-8-7-24
7-7-7-24
-
1.65
8-8-8-24 1.6
9-9-9-24 1.35
8-8-8-21 1.6~1.65 •
7-8-7-24 1.6
•
•
•
•
•
•
7-8-7-24 1.6
9-9-9-24 1.5
9-9-9-24 1.25
8-8-8-24 1.35
9-9-9-28 1.6
9-9-9-28 1.6
7-7-7-24 1.6
8-8-8-28 1.6
-
1.65
1.65
1.65
1.65
1.65
1.65
1.65
1.65
1.65
1.65
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
DIMM.socket.
support.(Optional)
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
4.DIMM
•
•
•
•
•
•
•
•
•
•
-
1.65
-
-
-
-
1.65
1.65
1.65
1.7
1.65
1.65
1.65
1.65
1.65
1.65
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
ROG Crosshair V Formula 2-9
(DDR3 1600 MHz continued)
EK Memory EKM324L28BP8-I16(XMP)
EK Memory EKM324L28BP8-I16(XMP)
Elixir
4GB (2 x 2GB )
4GB (2 x 2GB)
M2P2G64CB8HC9N-DG(XMP) 2GB
GoodRam GR1600D364L9/2G 2GB
KINGTIGER KTG2G1600PG3(XMP)
Mushkin
Mushkin
Patriot
Patriot
Patriot
PATRIOT
Patriot
Patriot
Team
996805(XMP)
998805(XMP)
PX7312G1600LLK(XMP)
PGS34G1600LLKA2
PGS34G1600LLKA
PGS34G1600LLKA
PVT36G1600LLK(XMP)
PX538G1600LLK(XMP)
TXD31024M1600C8-D(XMP)
DS -
DS -
DS -
2GB
4GB (2 x 2GB )
DS -
DS -
6GB (3 x 2GB ) DS -
12GB (3 x 4GB ) DS -
4GB (2 x 2GB )
4GB (2 x 2GB )
4GB (2 x 2GB)
6GB (3 x 2GB)
8GB (2 x 4GB )
DS -
DS -
DS -
DS -
DS -
1GB SS Team
Team
Team
TXD32048M1600C7-L(XMP) 2GB
TXD32048M1600HC8-D(XMP) 2GB
DS Team
DS Team
-
-
-
-
-
-
-
-
-
-
JN
-
-
T3D1288RT-
16
T3D1288LT-
16
T3D1288RT-
16
7-7-7-24
8-8-8-24
-
-
9
9
-
6-8-6-24
-
1.65
6-8-6-24 1.65
8-9-8-24 1.65
8-8-8-24 1.7
7-7-7-20 1.7
7-7-7-20
8-8-8-24
1.7
1.65
8-9-8-24 1.65
8-8-8-24 1.65
-
-
-
-
1.65
1.65
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
2-10
Crosshair V Formula Motherboard Qualified Vendors Lists (QVL).
DDR3.1800.MHz.capability
Vendors Part.No.
Size
SS/
DS
G.SKILL
G.SKILL
F3-14400CL6D-4GBFLS(XMP) 4GB (2 x 2GB) DS -
F3-14400CL9D-4GBRL(XMP) 4GB (2 x 2GB) DS -
KINGSTON KHX1800C9D3T1K3/6GX(XMP) 6GB (3 x 2GB) DS -
Chip.
Brand
-
-
-
Chip.NO.
Timing Voltage
-
6-8-6-24 1.65
9-9-9-24 1.6
1.65
•
•
DIMM.socket.support.
(Optional)
•
1.DIMM 2.DIMM 4.DIMM
•
•
•
•
•
•
Crosshair V Formula Motherboard Qualified Vendors Lists (QVL).
DDR3.1866.MHz.capability
Vendors Part.No.
Size
CORSAIR
G.SKILL
G.SKILL
G.SKILL
CMZ8GX3M2A1866C9(XMP) 8GB (2 x 4GB ) DS
F3-15000CL9D-4GBRH (XMP) 4GB (2 x 2GB) DS
F3-15000CL9D-4GBTD(XMP)
F3-14900CL9D-8GBSR(XMP)
4GB (2 x 2GB) DS
8GB (2 x 4GB ) DS
KINGSTON KHX1866C9D3T1K3/3GX(XMP) 3GB (3 x 1GB ) SS
OCZ
OCZ
OCZ
OCZ3RPR1866C9LV3GK
OCZ3G1866LV4GK
OCZ3P1866C9LV6GK
Super Talent W1866UX2G8(XMP)
Team TXD32048M1866C9(XMP)
3GB (3 x 1GB ) DS
4GB (2 x 2GB ) DS
6GB (3 x 2GB) DS
2GB (2 x 1GB) SS
2GB DS
Timing
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
9-10-9-27 1.5
9-9-9-24 1.65
9-9-9-24 1.65
9-10-9-28 1.5
9-9-9
1.65
1.65
10-10-10 1.65
9-9-9
8-8-8-24 -
1.65
-
Team T3D1288RT-16 9-9-9-24 1.65
Voltage
•
•
•
•
•
•
•
•
•
•
(Optional)
1.DIMM 2.DIMM 4.DIMM
•
•
•
•
•
•
•
•
•
•
•
•
•
Chapter 2: Hardware information
Crosshair.V.Formula.Motherboard.Qualified.Vendors.Lists.(QVL).
DDR3.2000.MHz.capability
Vendors Part.No.
Size
A-DATA
A-DATA
AX3U2000GB2G9B(XMP)
AX3U2000GC4G9B(XMP)
Apacer 78.AAGD5.9KD(XMP)
CORSAIR CMT6GX3M3A2000C8(XMP)
G.SKILL
G.SKILL
G.SKILL
G.SKILL
G.SKILL
GEIL
GEIL
F3-16000CL9D-4GBRH(XMP) 4GB (2 x 2GB)
F3-16000CL9D-4GBTD(XMP)
F3-16000CL9T-6GBPS(XMP)
F3-16000CL9T-6GBTD(XMP)
F3-16000CL7Q-8GBFLS(XMP) 8GB (4 x 2GB)
GUP34GB2000C9DC(XMP)
GE38GB2000C9QC(XMP)
2GB
4GB
DS -
DS -
6GB (3 x 2GB) DS -
6GB (3 x 2GB ) DS -
4GB (2 x 2GB)
6GB (3 x 2GB)
6GB (3 x 2GB)
8GB (4 x 2GB)
DS -
DS -
DS -
DS -
DS -
4GB (2 x 2GB ) DS -
DS -
3GB (3 x 1GB ) SS -
4GX(XMP)
4GB (2 x 2GB ) DS -
KINGSTON KHX2000C9D3T1K2/4GX(XMP) 4GB (2 x 2GB ) DS -
6GB (3 x 2GB ) DS -
OCZ
AEXEA
AEXEA
Patriot
Team
Team
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
9
-
9
-
Timing Voltage
9-11-9-27 1.55~1.75 •
9-11-9-27 1.55~1.75 •
(Optional)
1.DIMM 2.DIMM 4.DIMM
•
9-9-9-27 -
8-9-8-24 1.65
9-9-9-24 1.65
9-9-9-24 1.65
9-9-9-24 1.65
9-9-9-24 1.6
7-9-7-24 1.65
9-9-9-28 1.65
9-9-9-28 1.65
•
•
•
•
•
•
•
•
•
•
•
•
•
1.65
•
1.65
1.65
1.65
•
•
•
6GB (3 x 2GB ) DS 1.65
6GX(XMP)
OCZ3B2000LV6GK
6GB (3 x 2GB ) DS -
6GB (3 x 2GB) DS -
-
-
9
7-8-7
1.65
1.65
(388375)(XMP)
PX7312G2000ELK(XMP)
TXD32048M2000C9(XMP)
TXD32048M2000C9-L(XMP)
4GB
AXA3ES2G2000LG28V(XMP) 2GB
AXA3ES4GK2000LG28V(XMP) 4GB (2 x 2GB ) DS -
12GB (3 x 4GB ) DS -
2GB
2GB
DS -
DS -
-
-
-
-
-
1.6
1.65
1.65
9-11-9-27 1.65
DS Team T3D1288RT-20 9-9-9-24 1.5
DS Team T3D1288RT-20 9-9-9-24 1.6
•
•
•
•
•
•
•
•
•
•
•
Crosshair V Formula Motherboard Qualified Vendors Lists (QVL).
DDR3.2133.MHz.capability
Vendors Part.No.
G.SKILL
F3-17066CL7D-4GBPIS
Size
4GB (2 x 2GB)
SS/DS Chip.Brand Chip.NO. Timing
DS -
Voltage
7-10-7-27 1.65
•
(Optional)
2.DIMM
4.DIMM
Side(s):.SS.-.Single-sided...DS.-.Double-sided.
DIMM.support:
•. 1.DIMM:.
Supports one (1) module inserted into any slot as Single-channel memory configuration.
•. 2.DIMMs
: Supports one pair of modules inserted into either the red or the black slots as one pair of Dual-channel memory configuration.
•. 4.DIMMs: Supports four (4) modules inserted into both the red or the black slots as two pairs of Dual-channel memory configuration.
• When installing total memory of 4GB capacity or more, Windows 32bit operation system may only recognize less than 3GB. Hence, a total installed memory of less than 3GB is recommended.
• The default DIMM frequency depends on its Seriel Presence Detect (SPD), which is the standard way of accessing information from a memory module.
Under the default state, some memory modules for overclocking may operate at a lower frequency than the vendor-marked value.
ROG Crosshair V Formula 2-11
2.2.5.
Expansion.slots
In the future, you may need to install expansion cards. The following sub-sections describe the slots and the expansion cards that they support.
Ensure to unplug the power cord before adding or removing expansion cards.
Failure to do so may cause you physical injury and damage motherboard components.
Installing.an.expansion.card
To install an expansion card:
1. Before installing the expansion card, read the documentation that came with it and make the necessary hardware settings for the card.
2. Remove the system unit cover (if your motherboard is already installed in a chassis).
3. Remove the bracket opposite the slot that you intend to use. Keep the screw for later use.
4. Align the card connector with the slot and press firmly until the card is completely seated on the slot.
5. Secure the card to the chassis with the screw you removed earlier.
6. Replace the system cover.
When using PCI cards on shared slots, ensure that the drivers support “Share
IRQ” or that the cards do not need IRQ assignments. Otherwise, conflicts will arise between the two PCI groups, making the system unstable and the card inoperable. Refer to the table on the next page for details.
2-12 Chapter 2: Hardware information
PCI.Express.x1.slots
This motherboard has one PCI Express x1 slot that supports a PCI Express x1 card complying with the PCI Express specifications. Refer to the figure below for the location of the slot.
PCI.Express.x16.slots
This motherboard has four PCI Express x16 slots that support PCI Express x16 cards complying with the PCI Express specifications. Refer to the figure below for the location of the slot.
VGA configuration
Single.VGA/PCIe.card
Dual.VGA/PCIe.card
Triple.VGA/PCIe.card
PCIe.x16_1
x16 (Recommend for single VGA) x16 x16
PCI.Express.operating.mode
PCIe.x8/x1_2 PCIe.x16/x8_3
N/A x1 x8 x16 (Single VGA) x16 x8
ROG Crosshair V Formula 2-13
2-14
• In single VGA card mode, use first the PCIe 2.0 x16_1 slot or PCIe 2.0 x16/ x8_3 slot for a PCI Express x16 graphics card to get better performance.
• In CrossFireX™ or SLI™ mode, use the PCIe 2.0 x16_1 and PCIe 2.0 x16/ x8_3 slots for PCI Express x16 graphics cards to get better performance.
• Use the PCIe x16_1, PCIe x8/x1_2, and PCIe x16/x8_3 slots for 3-Way SLI or CrossFireX™ mode.
• If you install a PCIe x16 graphics card on to the PCIe x16_1 slot, a PCIe device with a bandwidth faster than x8 link to the PCIe x16/x8_3 slot, and a
PCIe device with a bandwidth slower than x4 link to the PCIe x8/x1_2 slot, the three PCIe x16 slots will work at x16, x16, x1 link as the default.
• If you install a PCIe x16 graphics card on to the PCIe x16_1 slot, a PCIe device with a bandwidth slower than x8 link to the PCIe x16/x8_3 slot, and a PCIe device with a bandwidth faster than x4 link to the PCIe x8/x1_2 slot, the three PCIe x16 slots will work at x16, x8, x8 link as the default.
• We recommend that you provide sufficient power when running
CrossFireX™ or SLI™ mode.
• Connect a chassis fan to the motherboard connector labeled
CHA_FAN1/2/3 when using multiple graphics cards for better thermal environment.
IRQ.assignments.for.this.motherboard
Intel 82583V
ASM1061
ASM1042 USB3.0_1
ASM1042 USB3.0_2
A
–
–
–
Onchip SATA Controller –
Onchip USB_1
Onchip USB_2
Onchip Azaliz
PCI Slot
PCIE_X16_1
–
–
PCIE_X8/X1_2
PCIE_X16/X8_3
PCIE_X4_4
PCIE_X1_1
B
– – shared –
– shared –
– –
–
– shared –
– shared – shared –
–
–
– shared –
– – shared –
– – shared – shared –
– –
–
–
C
–
– – shared –
ASM1042 USB3.0_3
shared –
–
–
–
–
–
–
–
D
–
E
–
–
–
– – –
– shared –
–
–
–
–
–
–
–
–
– – –
– shared –
–
–
–
–
–
–
F G H
– shared –
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
– –
– shared
Chapter 2: Hardware information
2.2.6.
Onboard.LEDs
The motherboard comes with a set of LEDs that indicate the voltage conditions of CPU, memory, northbridge and southbridge. You may adjust the voltages in
BIOS. There are also an LED for hard disk drive activity and an onboard switch for power status. For more information about voltage adjustment, refer to 3.3 Extreme
Tweaker menu.
1.. CPU.LED
The CPU LED has three voltage displays: CPU Voltage, CPU/NB, and VDDA
Voltage 2.5V; you can select the voltage to display in BIOS. Refer to the illustration below for the location of the CPU LED and the table below for LED definition.
2.. Memory.LED
The Memory LED has two voltage displays: DDR and VDDR. Refer to the illustration below for the location of the memory LED and the table below for
LED definition.
3.. Northbridge/Southbridge.LEDs
Northbridge and southbridge LEDs each have two different voltage displays.
The northbridge LED displays the NB voltage, the NB 1.8V voltage or the
VDDPCIE The southbridge LED shows either the SB voltage or the HT voltage. You can select the voltage to display in BIOS. Refer to the illustration below for the location of the northbridge/southbridge LEDs and the table below for LED definition.
ROG Crosshair V Formula 2-15
CPU.Voltage.(default)
CPU/NB.Voltage
VDDA.Voltage.2.5V
NB.Voltage
Normal.(green) by CPU–1.36875
High.(yellow)
1.3750–1.49375
Crazy.(red)
1.5–by CPU by CPU–1.36875
1.3750–1.49375
1.5–by CPU
2.20000–2.76875
2.77500–3.00625
3.01250–3.18750
0.80000–1.59375
1.60000–1.84375
1.85000-2.00000
1.96100-3.00775
NB.1.8.Voltage
1.80200-1.89475
1.90800-1.94775
VDD.PCIE.Voltage
SB.Voltage
1.11300-1.59000
1.11300-1.44425
1.60325-1.84175
1.45750-1.69600
HT.Voltage
0.80000–1.39375
1.40000-1.65000
DRAM.BUS.1.5V.Voltage
1.20000-1.72500
1.73125-2.32500
VDDR.Voltage
1.20500-1.39125
1.40450-1.65625
1.85500-2.00075
1.70925-1.802
1.65625-2.00000
2.33125-2.90000
1.66950-1.802
4.. Hard.Disk.LED
The hard disk LED is designed to indicate the hard disk activity. It blinks when data is being written into or read from the hard disk drive. The LED does not light up when there is no hard disk drive connected to the motherboard or when the hard disk drive does not function.
2-16 Chapter 2: Hardware information
5.. GO.LED
Blinking: Indicates that MemOK! is enabled before POST.
Lighting: Indicates that the system loads the preset profile (GO_Button file) for temporary overclocking when in OS.
6.. Q.LED
Q LEDs check key components (CPU, DRAM, VGA card, and booting devices) in sequence during motherboard booting process. If an error is found , the corresponding LED will continue lighting until the problem is solved. This user-friendly design provides an intuitional way to locate the root problem within a second.
ROG Crosshair V Formula 2-17
7.. Power.LED
The motherboard comes with a power-on switch that lights up to indicate that the system is ON, in sleep mode, or in soft-off mode. This is a reminder that you should shut down the system and unplug the power cable before removing or plugging in any motherboard component. The illustration below shows the location of the onboard power-on switch.
2-18 Chapter 2: Hardware information
2.2.7.
Jumpers
1.. Clear.RTC.RAM.(3-pin.CLRTC)
This jumper allows you to clear the Real Time Clock (RTC) RAM in
CMOS. You can clear the CMOS memory of date, time, and system setup parameters by erasing the CMOS RTC RAM data. The onboard button cell battery powers the RAM data in CMOS, which include system setup information such as system passwords.
To erase the RTC RAM
1. Turn OFF the computer and unplug the power cord.
2. Move the jumper cap from pins 1-2 (default) to pins 2-3. Keep the cap on pins 2-3 for about 5–10 seconds, then move the cap back to pins 1-2.
3. Plug the power cord and turn ON the computer.
4. Hold down the <Del> key during the boot process and enter BIOS setup to re-enter data.
Except when clearing the RTC RAM, never remove the cap on CLRTC jumper default position. Removing the cap will cause system boot failure!
• If the steps above do not help, remove the onboard battery and move the jumper again to clear the CMOS RTC RAM data. After the CMOS clearance, reinstall the battery.
• You do not need to clear the RTC when the system hangs due to overclocking. For system failure due to overclocking, use the C.P.R. (CPU
Parameter Recall) feature. Shut down and reboot the system so the BIOS can automatically reset parameter settings to default values.
• Due to the chipset behavior, AC power off is required to enable C.P.R. function. You must turn off and on the power supply or unplug and plug the power cord before rebooting the system.
ROG Crosshair V Formula 2-19
2.2.8.
Internal.connectors
These connectors are for the Serial ATA signal cables for Serial ATA hard disk drives and optical disc drives.
If you installed Serial ATA hard disk drives, you can create a RAID 0, 1, 5, and 10 configuration with the onboard AMD ® SB950 RAID controllers.
AMD
2-20
• These connectors are set to AHCI mode by default. In AHCI mode, you can connect Serial ATA boot/data hard disk drives to these connectors.
If you intend to create a Serial ATA RAID set using these connectors, set the SATA.Port1-4 item in the BIOS to [RAID]. See section 3.5.3.Storage.
Configuration for details.
• Before creating a RAID set, refer to section 4.4 RAID configurations or the manual bundled in the motherboard support DVD.
• You must install Windows ® XP Service Pack 2 or later versions before using
Serial ATA hard disk drives. The Serial ATA RAID feature is available only if you are using Windows ® XP SP2 or later versions.
• When using hot-plug and NCQ, set the SATA.Port1-4 in the BIOS to [AHCI].
See section 3.5.3 Storage Configuration for details.
Chapter 2: Hardware information
2.. Asmedia ® .Serial.ATA.6Gb/s.connectors.(7-pin.SATA6G_E1)
These connectors connect to Serial ATA 6Gb/s hard disk drives and optical disc drives via Serial ATA 6Gb/s signal cables.
3.. USB.2.0.connectors.(10-1.pin.USB910.and.USB1112)
These connectors are for USB 2.0 ports. Connect the USB module cables to these connectors, then install the modules to slots opening at the back of the system chassis. This USB connectors comply with USB 2.0 specification that supports up to 480 Mbps connection speed.
ROG Crosshair V Formula 2-21
You can connect the USB 2.0 cable to ASUS Q-Connector (USB, blue) first, and then install the Q-Connector (USB) to the USB 2.0 connector onboard.
4.. USB.3.0.connectors.(18-1.pin.USB3_56)
These connectors are for USB 3.0 ports. Connect the USB 3.0 module cables to these connectors, then install the modules to slots opening at the back of the system chassis.
Never connect a 1394 cable to the USB connectors. Doing so will damage the motherboard!
2-22 Chapter 2: Hardware information
5.. CPU,.chassis,.and.optional.fan.connectors.
(4-pin.CPU_FAN,.4-pin.CPU_OPT,.4-pin.CHA_FAN1–3,.4-pin.OPT_FAN1–
3)
The fan connectors support cooling fans of 350 mA–2000 mA (24 W max.) or a total of 1 A–7 A (84 W max.) at +12V. Connect the fan cables to the fan connectors on the motherboard, ensuring that the black wire of each cable matches the ground pin of the connector.
DO NOT forget to connect the fan cables to the fan connectors. Insufficient air flow inside the system may damage the motherboard components. These are not jumpers! DO NOT place jumper caps on the fan connectors!
If you install two VGA cards, we recommend that you plug the chassis fan cable to the motherboard connector labeled OPT_FAN1/2/3 for better thermal environment.
ROG Crosshair V Formula 2-23
6.. Thermal.sensor.cable.connectors.(2-pin.OPT_TEMP1/2/3)
These connectors are for temperature monitoring. Connect the thermal sensor cables to these connectors and place the other ends to the devices which you want to monitor temperature. The optional fan1/2/3 can work with the temperature sensors for a better cooling effect.
Enable OPT.FAN1/2/3.overheat.protection
in BIOS if you connect thermal sensor cables to these connectors.
7.. Digital.audio.connector.(4-1.pin.SPDIF_OUT)
This connector is for an additional Sony/Philips Digital Interface (S/PDIF) port(s). Connect the S/PDIF Out module cable to this connector, then install the module to a slot opening at the back of the system chassis.
2-24
The S/PDIF module and the thermal sensor cable are purchased separately.
Chapter 2: Hardware information
8.. Front.panel.audio.connector.(10-1.pin.AAFP)
This connector is for a chassis-mounted front panel audio I/O module that supports either HD Audio or legacy AC`97 audio standard. Connect one end of the front panel audio I/O module cable to this connector.
• We recommend that you connect a high-definition front panel audio module to this connector to avail of the motherboard’s high-definition audio capability.
If you want to connect a high-definition front panel audio module to this connector, set the Front.Panel.Type
item in the BIOS setup to [HD.Audio];.
if you want to connect an AC'97 front panel audio module to this connector, set the item to [AC97] . By default, this connector is set to [HD.Audio] .
ROG Crosshair V Formula 2-25
9.. ATX.power.connectors.
(8-pin.EATX12V,.4-pin.EATX12V_1,.24-pin.EATXPWR,.4-pin.EZ_PLUG)
These connectors are for ATX power supply plugs. The power supply plugs are designed to fit these connectors in only one orientation. Find the proper orientation and push down firmly until the connectors completely fit.
2-26
• For a fully configured system, we recommend that you use a power supply unit (PSU) that complies with ATX 12 V Specification 2.0 (or later version) and provides a minimum power of 600 W.
• Do not forget to connect the 8-pin EATX12V power plug; otherwise, the system will not boot.
• Connect the 4-pin EZ_PLUG power plugs to ensure sufficient power supply when you install multiple graphics cards.
• Use of a PSU with a higher power output is recommended when configuring a system with more power-consuming devices. The system may become unstable or may not boot up if the power is inadequate. Refer to the Appendix for the certified 500W power supply or above.
• If you are uncertain about the minimum power supply requirement for your system, refer to the Recommended Power Supply Wattage Calculator at http://support.asus.com/PowerSupplyCalculator/PSCalculator.
aspx?SLanguage=en-us for details.
Chapter 2: Hardware information
10.. System.panel.connector.(20-8.pin.PANEL)
This connector supports several chassis-mounted functions.
•.
System.power.LED.(2-pin.PLED)
This 2-pin connector is for the system power LED. Connect the chassis power LED cable to this connector. The system power LED lights up when you turn on the system power, and blinks when the system is in sleep mode.
•.
Hard.disk.drive.activity.LED.(2-pin.IDE_LED)
This 2-pin connector is for the HDD Activity LED. Connect the HDD Activity
LED cable to this connector. The IDE LED lights up or flashes when data is read from or written to the HDD.
•.
System.warning.speaker.(4-pin.SPEAKER)
This 4-pin connector is for the chassis-mounted system warning speaker. The speaker allows you to hear system beeps and warnings.
•.
ATX.power.button/soft-off.button.(2-pin.PWRSW)
This connector is for the system power button. Pressing the power button turns the system on or puts the system in sleep or soft-off mode depending on the BIOS settings. Pressing the power switch for more than four seconds while the system is ON turns the system OFF.
•.
Reset.button.(2-pin.RESET)
This 2-pin connector is for the chassis-mounted reset button for system reboot without turning off the system power.
ROG Crosshair V Formula 2-27
2-28
11.. ASUS.Q-Connector.(system.panel)
Use the ASUS Q-Connector to connect/disconnect the chassis front panel cables.
To install the ASUS Q-Connector:
1. Connect the front panel cables to the
ASUS Q-Connector.
Refer to the labels on the
Q-Connector to know the detailed pin definitions, and then match them to their respective front panel cable labels.
IDE_LED+
IDE_LED-
PWR
Ground
IDE_LED
POWER SW
The labels on the front panel cables may vary depending on the chassis model.
Reset
Ground
RESET SW
2. Install the ASUS Q-Connector to the system panel connector, ensuring the orientation matches the labels on the motherboard.
3. The front panel functions are now enabled. The figure shows the Q-
Connector is properly installed on the motherboard.
Chapter 2: Hardware information
2.2.9.
Onboard.switches
Onboard switches allow you to fine-tune performance when working on a bare or open-case system. This is ideal for overclockers and gamers who continually change settings to enhance system performance.
1.. Power-on.switch
Press the power-on switch to wake/power up the system.
2.. Reset.switch
Press the reset switch to reboot the system.
ROG Crosshair V Formula 2-29
3.. GO.button
Press the GO button before POST to enable MemOK! or press it to quickly load the preset profile (GO_Button file) for temporary overclocking when in
OS.
4.. ROG.Connect.switch
Use the ROG Connect switch to enable/disable the ROG Connect fuctions.
2-30 Chapter 2: Hardware information
5.. CPU.Level.Up.switch
Use the CPU Level Up switch to overclock immediately with OC profile presets without the hassle of entering BIOS.
ROG Crosshair V Formula 2-31
2.2.10. ProbeIt
The ROG ProbeIt feature provides a nice touch for your convenient and accurate
OC settings. No time wasted fumbling around on the complicated motherboard layout, the clearly marked area gives you easier access to the measure points when a multitester is employed for more accurate measurements during your busy overclocking work.
Refer to the following illustration for ProbeIt location.
Using.ProbeIt
You may connect the multitester to the motherboard as shown on Figure 1, or use the ProbeIt cable to connect to the motherboard as shown on Figure 2.
2-32
Figure.1
Figure.2
The photos above are for reference only, the actual motherboard layout and measure points location may differ by models.
Chapter 2: Hardware information
2.3 Building your computer system
2.3.1.
Additional.tools.and.components.to.build.a.PC.system
1.bag.of.screws
PC.chassis
AMD.AM3+/AM3.CPU
Philips.(cross).screwdriver
Power.supply.unit
AMD.AM3+.compatible.CPU.Fan
DIMM SATA.hard.disk.drive
SATA.optical.disc.drive.(optional) Graphics.card
The tools and components in the table above are not included in the motherboard package.
ROG Crosshair V Formula 2-33
2.3.2.
CPU.installation
The AM3+ socket has a different pinout from the AM2+/AM2 socket. Ensure you use a CPU designed for the AM3+ socket. The CPU fits in only one correct orientation. DO NOT force the CPU into the socket to prevent bending the connectors on the socket and damaging the CPU!
1
2
2-34 Chapter 2: Hardware information
3
2.3.3.
CPU.heatsink.and.fan.assembly.installation
Apply the Thermal Interface
Material to the CPU heatsink and CPU before you install the heatsink and fan if necessary.
ROG Crosshair V Formula 2-35
2.3.3. To.install.the.CPU.heatsink.and.fan.assembly
1
2
2-36 Chapter 2: Hardware information
3
4
5
ROG Crosshair V Formula 2-37
2.3.4.
DIMM.installation
2-38
To.remove.a.DIMM
Chapter 2: Hardware information
2.3.5.
Motherboard.installation
The diagrams in this section are for reference only. The motherboard layout may vary with models, but the installation steps remain the same.
ROG Crosshair V Formula 2-39
2-40
DO NOT overtighten the screws! Doing so can damage the motherboard.
Chapter 2: Hardware information
2.3.6.
ATX.Power.connection
OR OR
ROG Crosshair V Formula 2-41
2.3.7.
SATA.device.connection
OR
OR
2-42 Chapter 2: Hardware information
2.3.8.
Front.I/O.Connector
To.install.ASUS.Q-Connector
IDE_LED+
IDE_LED-
IDE_LED
PWR
Ground
Reset
Ground
POWER SW
RESET SW
To.install.USB.Connector
To.install.front.panel.audio.
connector
AAFP
USB
ROG Crosshair V Formula 2-43
2.3.9.
Expension.Card.installation
To.install.PCIe.x16.cards
To.install.PCIe.x1.cards
To.install.PCI.cards
2-44 Chapter 2: Hardware information
2.3.10. ROG.ThunderBolt.Installation
Combing a dedicated Network Processing Unit (NPU) and a built-in headphone amplifier, ThunderBolt provides you with a best solution to online games, a maximum game performance and less lag problems.
Installing.ThunderBolt
1. Locate the most suitable PCIe x1 or PCIe x16 slot for the ThunderBolt. You can either install ThunderBolt to the PCIe x1 slot or the PCIe x16 slot.
2. Align the card connector with the slot and press firmly until the card sits on the slot completely.
ROG Crosshair V Formula 2-45
3. Connect the USB cable to the onboard USB connector.
4. Connect the 4-pin molex power connector to the ThunderBolt.
2-46
• Ensure to connect the AAFP cable from the chassis front panel to the
ThunderBolt AAFP connector.
• Install the ThunderBolt on the PCIE x16 slot for a better LAN performance.
• ROG ThunderBolt is only available on selected model.
Chapter 2: Hardware information
2.3.11. Rear.panel.connectors
Rear.panel.connectors
1. PS/2 keyboard/Mouse Combo port
2. USB 2.0 ports 1 and 2
3. USB 3.0 ports 3 and 4
4. LAN (RJ-45) port*
5. USB 3.0 ports 1 and 2
6. Clear CMOS switch
7. External SATA port
8. Optical S/PDIF Out port
9. USB 2.0 ports 3 and 4
10. USB 2.0 ports 5, 6, 7 and 8 (1 port can be switched to ROG Connect)
11. Audio ports
To use hot-plug, set the Controller.Mode
in the BIOS settings to [AHCI] mode.
See section 3.5.6 Onboard Devices Configuration for details.
*.LAN.port.LED.indications
Activity/Link Speed.LED
OFF OFF
Yellow Blinking
Yellow Blinking
OFF
ORANGE
Yellow Blinking GREEN
Description
Soft-off Mode
10 Mbps connection or suspend
100 Mbps connection
1 Gbps connection
Activity/.
Link.LED
Speed.
LED
LAN.port
ROG Crosshair V Formula 2-47
2.3.12. Audio.I/O.connections
Audio 2, 4, 6, or 8-channel configuration
Port
Light Blue
Lime
Pink
Orange
Black
Gray
Headset.
2-channel
Line In
Line Out
Mic In
–
–
–
4-channel 6-channel 8-channel
Line In Line In Line In
Front Speaker Out Front Speaker Out Front Speaker Out
Mic In Mic In Mic In
– Center/Subwoofer Center/Subwoofer
Rear Speaker Out Rear Speaker Out Rear Speaker Out
– – Side Speaker Out
Audio.I/O.ports.
Connect.to.Headphone.and.Mic
2-48 Chapter 2: Hardware information
Connect.to.Stereo./.2.1-channel.Speakers
Connect.to.4.1-channel.Speakers
Connect.to.5.1-channel.Speakers
ROG Crosshair V Formula 2-49
Connect.to.7.1-channel.Speakers
2-50 Chapter 2: Hardware information
2.4 Starting up for the first time
1. After making all the connections, replace the system case cover.
2. Be sure that all switches are off.
3. Connect the power cord to the power connector at the back of the system chassis.
4. Connect the power cord to a power outlet that is equipped with a surge protector.
5. Turn on the devices in the following order: a. Monitor b. External SCSI devices (starting with the last device on the chain) c. System power
6. After applying power, the system power LED on the system front panel case lights up. For systems with ATX power supplies, the system LED lights up when you press the ATX power button. If your monitor complies with “green” standards or if it has a “power standby” feature, the monitor LED may light up or switch between orange and green after the system LED turns on.
The system then runs the power-on self tests or POST. While the tests are running, the BIOS beeps (see BIOS beep codes table below) or additional messages appear on the screen. If you do not see anything within 30 seconds from the time you turned on the power, the system may have failed a power-on test. Check the jumper settings and connections or call your retailer for assistance.
BIOS.Beep
One short beep
Description
VGA detected
Quick boot set to disabled
No keyboard detected
No memory detected One continuous beep followed by two short beeps then a pause (repeated)
One continuous beep followed by three short beeps
No VGA detected
One continuous beep followed by four short beeps
Hardware component failure
7. At power on, hold down the <Delete> key to enter the BIOS Setup. Follow the instructions in Chapter 3.
ROG Crosshair V Formula 2-51
2.5 Turning off the computer
2.5.1.
Using.the.OS.shut.down.function
If you are using Windows ® Vista™/ Windows ® 7:
1. Click the Start button then select Shut.Down
.
2. The power supply should turn off after Windows ® shuts down.
If you are using Windows ® XP:
1. Click the Start button then select Turn.Off.Computer
.
2. Click the Turn.Off
button to shut down the computer.
3. The power supply should turn off after Windows ® shuts down.
2.5.2.
Using.the.dual.function.power.switch
While the system is ON, pressing the power switch for less than four seconds puts the system to sleep mode or to soft-off mode, depending on the BIOS setting.
Pressing the power switch for more than four seconds lets the system enter the soft-off mode regardless of the BIOS setting.
2-52 Chapter 2: Hardware information
This chapter tells how to change the system settings through the BIOS Setup menus. Detailed descriptions of the BIOS parameters are also provided.
Chapter summary
3
Knowing.BIOS............................................................................... 3-1
BIOS.setup.program..................................................................... 3-1
Extreme.Tweaker.menu................................................................ 3-5
3.4
Advanced.menu.......................................................................... 3-15
Monitor.menu.............................................................................. 3-29
Boot.menu................................................................................... 3-33
Tools.menu.................................................................................. 3-35
Exit.menu..................................................................................... 3-38
3.10. Updating.BIOS............................................................................. 3-39
ROG Crosshair V Formula
3.1 Knowing BIOS
BIOS (Basic Input and Output System) stores system hardware settings such as storage device configuration, overclocking settings, advanced power management, and boot device configuration that are needed for system startup in the motherboard CMOS. In normal circumstances, the default BIOS settings apply to most conditions to ensure optimum performance. We.recommend.that.you.not.
change.the.default.BIOS.settings
except in the following circumstances:
• An error message appears on the screen during the system bootup and requests you to run the BIOS Setup.
• You have installed a new system component that requires further BIOS settings or update.
Inappropriate settings of the BIOS may result to instability or failure to boot. We.
strongly.recommend.that.you.change.the.BIOS.settings.only.with.the.help.
of.a.trained.service.personnel
.
3.2 BIOS setup program
A BIOS setup program is provided for BIOS item modification. When you start up the computer, the system provides you with the opportunity to run this program.
Press <Del> during the Power-On Self-Test (POST) to enter the Setup utility.
Otherwise, POST continues with its test routines.
If you wish to enter Setup after POST, press <Ctrl> + <Alt> + <Delete>, or press the reset button on the system chassis to restart the system. You can also turn the system off and then turn it back on to restart the system. Do this last option only if the first two failed.
• The BIOS setup screens shown in this section are for reference purposes only, and may not exactly match what you see on your screen.
• Ensure that a USB mouse is connected to your motherboard if you want to use the mouse to control the BIOS setup program.
• If the system becomes unstable after changing any BIOS setting, load the default settings to ensure system compatibility and stability. Select the Load
Optimized Defaults item under the Exit menu. See section 3.9 Exit Menu for details.
• If the system fails to boot after changing any BIOS setting, try to clear the
CMOS and reset the motherboard to the default value. See section 2.3.11.
Rear.panel.connectors
for information on how to erase the RTC RAM.
The BIOS setup program is designed to make it as easy to use as possible. Being a menu-driven program, it lets you scroll through the various submenus and select from the available options using a keyboard or a USB mouse.
The BIOS setup program can be used under two modes: EZ.Mode
and Advanced.
Mode . You can change modes from the Exit menu or from the Exit/Advanced.
Mode button in the EZ.Mode
/ Advanced.Mode
screen.
ROG Crosshair V Formula 3-1
3.2.1.
EZ.Mode
The EZ Mode provides you an overview of the basic system information, and allows you to select the display language, system performance mode and boot device priority. To access the Advanced Mode, click Exit/Advanced.Mode
, then select Advanced.Mode
.
The default screen for entering the BIOS setup program can be changed. Refer to the Setup.Mode
section 3.7.Boot.memu
for details.
Selects.the.display.language.
of.the.BIOS.setup.program
Displays.the.CPU/motherboard.
temperature,.CPU/5V/3.3V/12V.voltage.
output,.CPU/chassis/power.fan.speed
Clicks.to.display.all.fan.
speeds.if.available
Exits.the.BIOS.setup.program.without.saving.
the.changes,.saves.the.changes.and.resets.
the.system,.or.enters.the.Advanced.Mode
3-2
Selects.the.boot.device..priority
Displays.the.system.properties.of.
the.selected.mode.on.the.right.hand.
side.
Power.Saving.mode
Normal.mode
Loads.optimized.default.
ASUS.Optimal.
mode
• The boot device options vary depending on the devices you installed to the system.
• The Boot.Menu(F8) button is available only when the boot device is installed to the system.
Chapter 3: BIOS setup
3.2.2.
Advanced.Mode
By default, the Advanced Mode appears when you enter the BIOS setup program.
The Advanced Mode provides advanced options for experienced end-users to configure the BIOS settings. The figure below shows an example of the Advanced
Mode. Refer to the following sections for the detailed configurations.
To access the EZ Mode, click Exit , then select ASUS.EZ.Mode
.
Menu.
items Menu.bar
Configuration fields
General.
help
Submenu.item
Pop-up.window
Scroll.bar
Navigation.keys
Menu.bar
The menu bar on top of the screen has the following main items:
Extreme.Tweaker
For changing the overclocking settings
Main For changing the basic system configuration
Advanced For changing the advanced system settings
Monitor
Boot
Tool
Exit
For displaying the system temperature, power status, and changing the fan settings.
For changing the system boot configuration
For configuring options for special functions
For selecting the exit options and loading default settings
ROG Crosshair V Formula 3-3
3-4
Menu.items
The highlighted item on the menu bar displays the specific items for that menu. For example, selecting Main shows the Main menu items.
The other items (Extreme Tweaker, Advanced, Monitor, Boot, Tool, and Exit) on the menu bar have their respective menu items.
Back.button
This button appears when entering a submenu. Press <Esc> or use the USB mouse to click this button to return to the previous menu screen.
Submenu.items
A greater than sign (>) before each item on any menu screen means that the item has a submenu. To display the submenu, select the item and press <Enter>.
Pop-up.window
Select a menu item and press <Enter> to display a pop-up window with the configuration options for that item.
Scroll.bar
A scroll bar appears on the right side of a menu screen when there are items that do not fit on the screen. Press the Up/Down arrow keys or <Page Up> / <Page
Down> keys to display the other items on the screen.
Navigation.keys
At the bottom right corner of the menu screen are the navigation keys for the
BIOS setup program. Use the navigation keys to select items in the menu and
Use <F12> key to capture the BIOS screen and save it to the removable storage device.
General.help
At the top right corner of the menu screen is a brief description of the selected item.
Configuration fields
These fields show the values for the menu items. If an item is user-configurable, you can change the value of the field opposite the item. You cannot select an item that is not user-configurable.
A configurable field is highlighted when selected. To change the value of a field, select it and press <Enter> to display a list of options.
Chapter 3: BIOS setup
3.3 Extreme Tweaker menu
The Extreme Tweaker menu items allow you to configure overclocking-related items.
Be cautious when changing the settings of the Extreme Tweaker menu items.
Incorrect field values can cause the system to malfunction.
The configuration options for this section vary depending on the CPU and DIMM model you installed on the motherboard.
Scroll down to display the following items:
ROG Crosshair V Formula 3-5
Scroll down to display the following items:
3-6
Ai.Overclock.Tuner.[Auto]
Allows you to select the CPU overclocking options to achieve the desired CPU internal frequency. Select any of these preset overclocking configuration options:
[Auto]
[Manual]
[D.O.C.P.]
Loads the optimal settings for the system.
Allows you to individually set overclocking parameters.
Allows you to select a DRAM overclocking profile.
OC.Tuner.[CANCEL]
OC Tuner automatically overclocks the frequency and voltage of CPU and DRAM.
Configuration options: [CANCEL] [OK]
CPU.Ratio.[Auto]
Allows you to manually adjust the maximum non-CPB CPU ratio. Use <+> and
<-> keys to adjust the value. The valid value ranges vary according to your CPU model.
Memory.Frequency.[Auto]
Allows you to set the memory operating frequency. Configuration options: [DDR3-
800MHz] [DDR3-1066MHz] [DDR3-1333MHz] [DDR3-1600MHz]
Selecting a very high memory frequency may cause the system to become unstable! If this happens, revert to the default setting.
CPU/NB.Frequency.[Auto]
Sets the ratio between northbridge (in CPU) Clock and the CPU Bus frequency.
Configuration options: [Auto] [1400MHz] [1600MHz] [1800MHz] [2000MHz]
[2200MHz] [2400MHz] [2600MHz] [2800MHz] [3000MHz] [3200MHz]
Chapter 3: BIOS setup
HT.Link.Speed.[Auto]
Allows you to set the HyperTransport link speed.
Configuration options: [Auto] [800MHz] [1000MHz] [1200MHz] [1400MHz]
[1600MHz] [1800MHz] [2000MHz]
CPU.Spread.Spectrum.[Auto]
[Auto]
[Disabled]
[Enabled]
Automatic configuration.
Enhances the BCLK overclocking ability.
Sets to [Enabled] for EMI control.
PCIe.Spread.Spectrum.[Auto]
[Auto]
[Disabled]
[Enabled]
Automatic configuration.
Enhances the PCIE overclocking ability.
Sets to [Enabled] for EMI control.
EPU.Power.Saving.Mode.[Disabled]
Allows you to enable or disable the EPU power saving function.
Configuration options: [Disabled] [Enabled]
DRAM.Timing.Control
The sub-items in this menu allow you to set the DRAM timing control features. Use the <+> and <-> keys to adjust the value. To restore the default setting, type [auto] using the keyboard and press the <Enter> key.
Changing the values in this menu may cause the system to become unstable! If this happens, revert to the default settings.
DRAM.Driving.Control
DCT0.Information:
CKE drive strength [Auto]
Configuration options: [Auto] [1x] [1.25x] [1.5x] [2x]
CS/ODT drive strength [Auto]
Configuration options: [Auto] [1x] [1.25x] [1.5x] [2x]
ADDR/CMD drive strength [Auto]
Configuration options: [Auto] [1x] [1.25x] [1.5x] [2x]
MEMCLK drive strength [Auto]
Configuration options: [Auto] [0.75x] [1x] [1.25x] [1.5x]
Data drive strength [Auto]
Configuration options: [Auto] [0.75x] [1x] [1.25x] [1.5x]
DQS drive strength [Auto]
Configuration options: [Auto] [0.75x] [1x] [1.25x] [1.5x]
ROG Crosshair V Formula 3-7
3-8
Processor ODT [Auto]
Configuration options: [Auto] [240 ohms +/- 20%] [120 ohms +/- 20%] [60 ohms +/- 20%]
DCT1.Information:
CKE drive strength [Auto]
Configuration options: [Auto] [1x] [1.25x] [1.5x] [2x]
CS/ODT drive strength [Auto]
Configuration options: [Auto] [1x] [1.25x] [1.5x] [2x]
ADDR/CMD drive strength [Auto]
Configuration options: [Auto] [1x] [1.25x] [1.5x] [2x]
MEMCLK drive strength [Auto]
Configuration options: [Auto] [0.75x] [1x] [1.25x] [1.5x]
Data drive strength [Auto]
Configuration options: [Auto] [0.75x] [1x] [1.25x] [1.5x]
DQS drive strength [Auto]
Configuration options: [Auto] [0.75x] [1x] [1.25x] [1.5x]
Processor ODT [Auto]
Configuration options: [Auto] [240 ohms +/- 20%] [120 ohms +/- 20%] [60 ohms +/- 20%]
GPU.DIMM.Post
The sub-items in this menu display the status of the installed VGA cards and memory. The field shows N/A if there’s no device installed on that slot.
DIGI.+.VRM/Power.Control
CPU.Load-line.Calibration.[Auto]
Load-line is defined by AMD CPU spec and affects CPU voltage. The CPU working voltage will decrease proportionally to CPU loading. Higher Load-line calibration would get higher voltage and better overclocking performance, but increase the
CPU and VRM thermal. This item allows you to adjust the voltage range from the following percentages to boost the system performance: 0% (Regular), 25%
(Medium), 50% (High), 75% (Ultra High) and 100% (Extreme).
Configuration options: [Auto] [Regular] [Medium] [High] [Ultra High] [Extreme]
The actual performance boost may vary depending on your CPU specifiation.
CPU/NB.Load.Line.Calibration.[Auto]
Allows you to select the CPU/NB Load-Line mode.
Configuration options: [Auto] [Regular] [High] [Extreme]
Chapter 3: BIOS setup
CPU.Voltage.Over-Current.Protection.[Auto]
This item provides wider total power range for overclocking. A higher value brings a wider total power range and extends the overclocking frequency range simultaneously.
Configuration options: [Auto] [100%] [110%] [120%] [130%] [140%] [Disabled]
Do not remove the thermal module while changing the DIGI+ VRM related parrameters . The thermal conditions should be monitored.
Some of the following items are adjusted by typing the desired values using the numeric keypad and press the <Enter> key. You can also use the <+> and
<-> keys to adjust the value. To restore the default setting, type [auto] using the keyboard and press the <Enter> key.
CPU/NB.Over-Current.Protection.[Auto]
This item provides wider total power range for overclocking. A higher value brings a wider total power range and extends the overclocking frequency range simultaneously.
Configuration options: [Auto] [100%] [110%] [120%] [130%]
CPU.PWM.Phase.Control.[Extreme]
Phase number is the number of woorking VRM phase. Increasing phase number under heavy system loading to get more transient and better thermal performance.
Reducing phase number under light system loading to increase VRM efficiency
[Standard]
[Optimized]
Proceeds phase control depending on the CPU loading.
Loads the ASUS optimized phase tuning profile.
[Extreme] Proceeds the full phase mode.
[Manual Adjustment] Allows manual adjustment
VRM.Over.Temperature.Protection.[Enabled]
CPU.Voltage.Frequency.[Auto]
Allows you to select the CPU Voltage Frequency.
Configuration options: [Auto] [Manual]
VRM Fixed Frequency Mode [300]
This item appears only when you set the CPU Voltage Frequency item to
[Manual] and allows you to set a fixed VRM frequency. Use the <+> and <-> keys to adjust the value. The values range from 300k Hz to 500k Hz with a
10k Hz interval.
CPU.PWM.mode.[Extreme]
[T.Probe]
[Extreme]
Maintains the VRM thermal balance.
Maintains the VRM current balance.
ROG Crosshair V Formula 3-9
Extreme.OV.[Disabled]
[Enabled]
[Disabled]
Enables the Extreme OV function.
Disables this function.
CPU.&.CPU/NB.Voltage.mode.[Manual.Mode]
[Manual Mode] Allows you to set a fixed CPU voltage.
[Offset Mode] Allows you to set the Offset voltage.
CPU Manual Voltage [Auto]
This item appears only when you set the CPU & NB Voltage item to [Manual
Mode] and allows you to set a fixed CPU voltage. The values range depends on your CPU.
CPU/NB Manual Voltage [Auto]
This item appears only when you set the CPU & NB Voltage item to [Manual
Mode] and allows you to set a fixed CPU/NB voltage. The values range depends on your CPU.
Refer to the CPU documentation before setting the CPU voltage. Setting a high voltage may damage the CPU permanently, and setting a low voltage may make the system unstable.
CPU.VDDA.Voltage.[Auto]
Allows you to set the CPU VDDA voltage. The values range from 2.20000V to 3.18750V with a 0.00625V interval. The text color in the configuration field indicates voltage condition.
DRAM.Voltage.[Auto]
Allows you to set the DRAM voltage. The values range from 1.20V to 2.90V with a
0.00625V interval.
According to CPU spec, DIMMs with voltage requirement over 1.65V may damage the CPU permanently. We recommend you install the DIMMs with the voltage requirement below 1.65V.
VDDR.[Auto]
Allows you to set the VDDR voltage. The values range from 1.20575V to 1.80200V with a 0.01325V interval.
DRAM.VREFDQ.[Auto]
Allows you to set the DRAM VREFDQ Voltage. The values range from 0.5900V to
0.9750V with a 0.0025V interval.
3-10
DRAM.VREFCA.[Auto]
Allows you to set the DRAM VREFCA Voltage. The values range from 0.5900V to
0.9750V with a 0.0025V interval.
Chapter 3: BIOS setup
DRAM.VREFCA.on.CPU.[Auto]
Allows you to set the DRAM VREFCA on CPU Voltage. The values range from
0.5900V to 0.9750V with a 0.0025V interval.
DRAM.Voltage.Switching.Frequency.[Auto]
Allows you to switch DRAM voltage frequency. Configuration options: [Auto] [1] [2x]
DRAM.Voltage.Over-Current.Protection.[Auto]
Configuration options: [Enabled] [Disabled]
NB.Voltage.[Auto]
Allows you to set the North Bridge voltage. The values range from 0.80000V to
2.00000V with a 0.00625V interval.
NB.HT.Voltage.[Auto]
Allows you to set the NB HT voltage. The values range from 0.80000V to 2.00000V with a 0.00625V interval.
NB.1.8V.Voltage.[Auto]
Allows you to set the NB 1.8V voltage. The values range from 1.80200V to
3.00775V with a 0.01325V interval.
VDD.PCIE.[Auto]
Allows you to set the VDD PCIE voltage. The values range from 1.11300V to 2.00075V with a 0.01325V interval. The text color in the configuration field indicates voltage condition.
SB.Voltage.[Auto]
Allows you to set the SB voltage. The values range from 1.11300V to 1.80200V with a 0.01325V interval.
NB.Voltage.Switching.Frequency.[Auto]
Allows you to switch NB voltage frequency. Configuration options: [Auto] [1] [2x]
NB.1.8V.Switching.Frequency.[Auto]
Allows you to switch NB 1.8V voltage frequency. Configuration options: [Auto] [1]
[2x]
VDD.PCIE.Switching.Frequency.[Auto]
Allows you to switch VDD PCIE voltage frequency. Configuration options: [Auto]
[1] [2x]
ROG Crosshair V Formula 3-11
3.4 Main menu
The Main menu screen appears when you enter the Advanced Mode of the BIOS
Setup program. The Main menu provides you an overview of the basic system information, and allows you to set the system date, time, language, and security settings.
3-12
3.4.1.
System.Language.[English]
Allows you to choose the BIOS language version from the options. Configuration options: [English]
3.4.2.
System.Date.[Day.xx/xx/xxxx]
Allows you to set the system date.
3.4.3.
System.Time.[xx:xx:xx]
Allows you to set the system time.
Chapter 3: BIOS setup
3.4.4.
Security
The Security menu items allow you to change the system security settings.
• If you have forgotten your BIOS password, erase the CMOS Real Time
Clock (RTC) RAM to clear the BIOS password. See section 2.3.11.Rear.
panel.connectors
for information on how to erase the RTC RAM.
• The Administrator or User.Password
items on top of the screen show the default Not.Installed
. After you set a password, these items show
Installed .
Administrator.Password
If you have set an administrator password, we recommend that you enter the administrator password for accessing the system. Otherwise, you might be able to see or change only selected fields in the BIOS setup program.
To set an administrator password:
1. Select the Administrator.Password
item and press <Enter>.
2. From the Create.New.Password
box, key in a password, then press
<Enter>.
3. Confirm the password when prompted.
ROG Crosshair V Formula 3-13
3-14
To change an administrator password:
1. Select the Administrator.Password
item and press <Enter>.
2. From the Enter.Current.Password
box, key in the current password, then press <Enter>.
3. From the Create.New.Password
box, key in a new password, then press
<Enter>.
4. Confirm the password when prompted.
To clear the administrator password, follow the same steps as in changing an administrator password, but press <Enter> when prompted to create/confirm the password. After you clear the password, the Administrator.Password
item on top of the screen shows Not.Installed
.
User.Password
If you have set a user password, you must enter the user password for accessing the system. The User.Password
item on top of the screen shows the default Not.
Installed . After you set a password, this item shows Installed .
To set a user password:
1. Select the User.Password
item and press <Enter>.
2. From the Create.New.Password
box, key in a password, then press
<Enter>.
3. Confirm the password when prompted.
To change a user password:
1. Select the User.Password
item and press <Enter>.
2. From the Enter.Current.Password
box, key in the current password, then press <Enter>.
3. From the Create.New.Password
box, key in a new password, then press
<Enter>.
4. Confirm the password when prompted.
To clear the user password, follow the same steps as in changing a user password, but press <Enter> when prompted to create/confirm the password. After you clear the password, the User.Password
item on top of the screen shows Not.Installed
.
Chapter 3: BIOS setup
3.5 Advanced menu
The Advanced menu items allow you to change the settings for the CPU and other system devices.
Be cautious when changing the settings of the Advanced menu items. Incorrect field values can cause the system to malfunction.
ROG Crosshair V Formula 3-15
3.5.1 CPU Configuration
The items in this menu show the CPU-related information that the BIOS automatically detects.
The items shown in this screen may be different due to the CPU you installed.
3-16
Cool‘n’Quiet.[Disabled]
[Enabled]
[Disabled]
Enables the AMD Cool’n’Quiet function.
Disables this function.
C1E.[Disabled]
[Enabled]
[Disabled]
Enables the C1E support function. This item should be enabled in order to enable the Enhanced Halt Sate.
Disables this function.
SVM.[Enabled]
[Enabled]
[Disabled]
Enables AMD virtualization in CPU. This secure virtual mode will let you run multiple operation system on the same physical hardware by decoupling operation system and physical hardware with the hypervisor layer.
Disables this function.
Chapter 3: BIOS setup
3.5.2 North Bridge Configuration
IOMMU.[Disabled]
Configuration options: [Disabled] [64MB]
Memory Configuration
Bank Interleaving [Auto]
Allows you to enable Memory Bank Interleaving fuction. Configuration options: [Auto] [Disabled]
Channel Interleaving [Auto]
Allows you to enable Memory Channel Interleaving fuction. Configuration options: [Auto] [Disabled]
ECC Mode [Disabled]
Allows you to enable or disable the ECC Mode.
Configuration options: [Enabled] [Disabled]
Power Down Enable [Disabled]
Allows you to enable or disable DDR power down mode.
Configuration options: [Enabled] [Disabled]
Memory Hole Remapping [Enabled]
Allows you to enable or disable Memory Hole Remapping fuction.
Configuration options: [Enabled] [Disabled]
DCT Unganged Mode [Enabled]
Allows you to select unganged DRAM mode (64-bit width).
[Enabled]: Unganged mode.
[Disabled]: Ganged mode.
Initiate.Graphic.Adapter.[PEG/PCI]
Allows you to decide which graphics controller to use as the primary boot device.
Configuration options: [PCI/PEG] [PEG/PCI]
Socket.0.Information
View information related to Socket 0.
ROG Crosshair V Formula 3-17
3.5.3 SATA Configuration
While entering Setup, the BIOS automatically detects the presence of SATA devices.
The SATA Port items show Not.Present
if no SATA device is installed to the corresponding SATA port.
3-18
Onchip.SATA.Channel.[Enabled]
Configuration options: [Disabled] [Disabled]
SATA.Port1-Port4.[AHCI]
Allows you to set the SATA configuration. This item appears only when you set the
OnChip SATA Channel item to [Enabled].
[IDE] Set to [IDE] when you want to use the Serial ATA hard disk drives as
Parallel ATA physical storage devices.
[RAID] Set to [RAID] when you want to create a RAID configuration from the
SATA hard disk drives.
[AHCI] Set to [AHCI] when you want the SATA hard disk drives to use the
AHCI (Advanced Host Controller Interface). The AHCI allows the onboard storage driver to enable advanced Serial ATA features that increases storage performance on random workloads by allowing the drive to internally optimize the order of commands.
Chapter 3: BIOS setup
SATA.Port5-Port6.[AHCI]
Allows you to set the SATA configuration. This item appears only when you set the
OnChip SATA Channel item to [Enabled].
[IDE] Set to [IDE] when you want to use the Serial ATA hard disk drives as Parallel ATA physical storage devices.
[AHCI] Set to [AHCI] when you want the SATA hard disk drives to use the
AHCI (Advanced Host Controller Interface). The AHCI allows the onboard storage driver to enable advanced Serial ATA features that increases storage performance on random workloads by allowing the drive to internally optimize the order of commands.
You can only set SATA Port5-Port6 to [IDE] if Port1-Port4 is set to [IDE]
S.M.A.R.T..Status.Check.[Enabled]
S.M.A.R.T. (Self-Monitoring, Analysis and Reporting Technology) is a monitor system. When read/write of your hard disk errors occur, this feature allows the hard disk to report warning messages during the POST.
Configuration options: [Disabled] [Enabled]
SATA.Hot.Plug.on.PORT1-6.[Disabled]
Allows you to set SATA Hot Plug on PORT1-6 to external SATA port.
Configuration options: [Disabled] [Enabled]
ROG Crosshair V Formula 3-19
3.5.4 USB Configuration
The items in this menu allow you to change the USB-related features.
3-20
The USB Devices item shows the auto-detected values. If no USB device is detected, the item shows None.
Legacy.USB.Support.[Enabled]
[Disabled]
[Enabled]
[Auto]
Disables the function.
Enables the support for USB devices on legacy operating systems
(OS).
Allows the system to detect the presence of USB devices at startup. If detected, the USB controller legacy mode is enabled. If no USB device is detected, the legacy USB support is disabled.
Legacy.USB3.0.Support.[Enabled]
[Enabled]
[Disabled]
Enables the support for USB 3.0 devices on legacy operating systems (OS).
Disables the function.
EHCI.Hand-off.[Disabled]
[Disabled]
[Enabled]
Disables the function.
Enables the support for operating systems without an EHCI hand-off feature.
Chapter 3: BIOS setup
SB USB Configuration
The sub-items in this menu allow you to set the SB USB Configuration.
OHCI HC (Bus 0 Dev 18 Fn 0) [Enabled]
Enable or disable OHCI USB1.1 Controller. Configuration options: [Disabled]
[Enabled]
OHCI HC (Bus 0 Dev 19 Fn 0) [Enabled]
Enable or disable OHCI USB1.1 Controller. Configuration options: [Disabled]
[Enabled]
OHCI HC (Bus 0 Dev 22 Fn 0) [Enabled]
Enable or disable OHCI USB1.1 Controller. Configuration options: [Disabled]
[Enabled]
OHCI HC (Bus 0 Dev 20 Fn 5) [Enabled]
Enable or disable OHCI USB1.1 Controller. Configuration options: [Disabled]
[Enabled]
USB PORT 0-13 [Enabled]
Enable or disable USB port 0-13. Configuration options: [Disabled] [Enabled]
USB PORT FL0-FL1 [Enabled]
Enable or disable USB port FL0-FL1. Configuration options: [Disabled]
[Enabled]
USB Device Wakeup From S3 or S4 [Enabled]
Enable or disable USB Device Wakeup From S3 or S4 funtion. Configuration options: [Disabled] [Enabled]
ROG Crosshair V Formula 3-21
3.5.5.
CPU.Core.On/.Off.Function
3-22
ASUS.Core.Unlocker.[Disabled]
Allows you to enable ASUS Core Unlocker to get full computing power of processor.Configuration options: [Disabled] [Enabled]
System might become unstable due to different CPU margins.
CPU.Core.Activation.[Auto]
Allows you to manually turn off the second or the third core.
Configuration options: [Auto] [Manual]
Chapter 3: BIOS setup
3.5.6 Onboard Devices Configuration
ASM1061.Storage.Controller.[ACHI.Mode]
Allows you to select the ASM1061 storage controller operating mode.
[Disabled]
[IDE]
[AHCI]
Disables the controller.
Set to [IDE] when you want to use the Serial ATA hard disk drives as Parallel ATA physical storage devices.
Set to [AHCI] when you want the SATA hard disk drives to use the
AHCI (Advanced Host Controller Interface). The AHCI allows the onboard storage driver to enable advanced Serial ATA features that increases storage performance on random workloads by allowing the drive to internally optimize the order of commands.
ASM1061.Storage.OPROM.[Enabled]
This item appears only when you set the previous item to [Enabled] and allows you to enable or disable the OptionRom of the ASM1061 storage controller.
Configuration options: [Enabled] [Disabled]
Asmedia.USB.3.0.Controller.[Enabled]
[Enabled]
[Disabled]
Enables the Asmedia USB 3.0 Controller.
Disables the controller.
ROG Crosshair V Formula 3-23
3-24
Asmedia.USB.3.0.Battery.Charging.Support.[Disabled]
[Enabled]
[Disabled]
Enables the Asmedia USB 3.0 Battery Charging Support fuction.
Disables the fuction.
Intel.82583.LAN.[Enabled]
[Enabled]
[Disabled]
Enables the Intel 82583 LAN controller.
Disables the controller.
Launch.PXE.OPROM.[Disabled]
This item appears only when you set the previous item to [Enabled] and allows you to enable or disable boot option for PXE OPROM.
Configuration options: [Enabled] [Disabled]
SB HD Azalia Configuration
HD.Audio.Azalia.Device.[Enabled]
[Enabled]
[Disabled]
Enables the HD Audio Device.
Disables the controller.
Azalia.Front.Panel.[HD]
Allows you to set the front panel audio connector (AAFP) mode to legacy AC’97 or high-definition audio depending on the audio standard that the front panel audio module supports.
[AC97]
[HD]
Sets the front panel audio connector (AAFP) mode to legacy AC’97
Sets the front panel audio connector (AAFP) mode to high definition audio.
SPDIF.Out.Type.[SPDIF]
[SPDIF]
[HDMI]
Sets to [SPDIF] for SPDIF audio output.
Sets to [HDMI] for HDMI audio output.
Chapter 3: BIOS setup
3.5.7.
APM
ErP.Ready.[Disabled]
[Disabled]
[Enabled]
Disables the Energy Using Products (EuP) Ready function.
Allows BIOS to switch off some power at S5 state to get system ready for the EuP requirement. When set to [Enabled], power for
WOL, WO_USB, audio and onboard LEDs will be switched off at
S5 state.
Restore.AC.Power.Loss.[Power.Off]
[Power On] The system goes into on state after an AC power loss.
[Power Off] The system goes into off state after an AC power loss.
[Last State] The system goes into either off or on state, whatever the system state was before the AC power loss.
Power.On.By.PS/2.Device.[Disabled]
[Disabled]
[Enabled]
Disables the Power On by a PS/2 device.
Enables the Power On by a PS/2 device. This feature requires an
ATX power supply that provides at least 1A on the +5VSB lead.
Power.On.By.PME.[Disabled]
[Disabled]
[Enabled]
Disables the PME devices to generate a wake event.
Enables the PME devices to generate a wake event.
Power.On.By.RTC.[Disabled]
[Disabled]
[Enabled]
Disables RTC to generate a wake event.
When set to [Enabled], the items RTC Alarm Date (Days) and
Hour/Minute/Second will become user-configurable with set values.
ROG Crosshair V Formula 3-25
3.5.8 iROG Configuration iROG.Timer.Keeper.[Last.State]
Allows you to set the iROG Time Keeper operation mode.
Configuration options: [Last State] [Disabled] [Enabled]
3.5.9.
ROG.Connect
3-26
ROG.Connect.[Enabled]
Allows you to enable or disable the ROG Connect function.
Configuration options: [Enabled] [Disabled]
RC.Poster.Mode.[String]
RC Poster describes what occurs during the POST.
Configuration options: [String] [Code]
Chapter 3: BIOS setup
3.5.10. LED.Control
The LED Control menu items allow you to change the advanced settings for the onboard LEDs.
Take caution when changing the settings of the LED Control menu items.
Incorrect field values can cause the system to malfunction.
All.LED.Control.[Enabled]
Allows you to enable or disable the onboard LEDs control.
Configuration options: [Enabled] [Disabled]
The following items appear only when you set All LED Control to [Enabled].
ROG.Logo.[Enabled]
Allows you to enable or disable the onboard ROG logo LED.
Configuration options: [Enabled] [Disabled]
Voltiminder.LED.[Enabled]
Allows you to enable or disable the onboard Voltiminder LED.
Configuration options: [Enabled] [Disabled]
CPU.LED.Selection.[CPU]
Allows you to switch the onboard CPU LED display between CPU voltage [CPU],
CPU/NB voltage [CPU/NB], and CPU VDDA [CPU VDDA]. Configuration options:
[CPU] [CPU/NB] [CPU VDDA]
ROG Crosshair V Formula 3-27
NB.LED.Selection.[NB]
Allows you to switch the onboard NB LED display between NB voltage [NB], NB
1.8V [NB 1.8V], and VDDPCIE voltage [VDDPCIE].
Configuration options: [NB] [NB 1.8V] [VDDPCIE]
SB.LED.Selection.[SB]
Allows you to switch the onboard SB LED display between SB voltage [NB] and HT voltage [HT]. Configuration options: [SB] [HT]
DDR.LED.Selection.[DDR]
Allows you to switch the onboard DDR LED display between DDR voltage [DDR] and VDDR voltage [VDDR]. Configuration options: [DDR] [VDDR]
3-28 Chapter 3: BIOS setup
3.6 Monitor menu
The Monitor menu displays the system temperature/power status, and allows you to change the fan settings.
Voltage.Monitor
Vcore Voltage; 3.3V Voltage; 5V Voltage; 12V Voltage; VDDA2.5V Voltage;
CPU/NB Voltage; DRAM Voltage; HT Voltage; NB Voltage;
SB Voltage [xxxV]
The onboard hardware monitor automatically detects the voltage output through the onboard voltage regulators.
Temperature.Monitor
CPU Temperature; MB Temperature; NB Temperature; SB Temperature;
OPT1/2/3 Temperature[xxxºC/xxxºF]
The onboard hardware monitor automatically detects and displays the CPU, motherboard, and the assigned devices temperatures. Select [Ignored] if you do not wish to display the detected temperatures.
NB Overheat Protection [90ºC]
The system automatically shuts down when the NB is heated over the set temperature to protect it from damage.
Configuration options: [Disabled] [70ºC] [80ºC] [90ºC] [100ºC]
ROG Crosshair V Formula 3-29
3-30
SB Overheat Protection [90ºC]
The system automatically shuts down when the SB is heated over the set temperature to protect it from damage.
Configuration options: [Disabled] [70ºC] [80ºC] [90ºC] [100ºC]
OPT TEMP1/2/3 Overheat Protection [90ºC]
Allows you to set the temperature over which the system automatically shuts down when any of the thermal sensor cables connected to the motherboard detects device overheat to protect the device from damage.
Configuration options: [Disabled] [70ºC] [80ºC] [90ºC] [100ºC]
Fan.Speed.Monitor
CPU FAN; CPU Opt FAN; Chassis FAN1/2/3 Speed;
Opt 1/2/3 FAN Speed [xxxxRPM] or [N/A]
The onboard hardware monitor automatically detects and displays the CPU fan, chassis fan, power fan, and optional fan speed in rotations per minute
(RPM). If any of the fans is not connected to the motherboard, the field shows
[N/A]. These items are not user-configurable.
Fan.Speed.Control
CPU.Q-Fan.Control.[Disabled]
Allows you to enable or disable the CPU fan controller.
[Disabled]
[Enabled]
Disables the CPU Q-fan controller.
Enables the CPU Q-fan controller.
The following items appear when you enable the CPU Fan Control feature.
Select Fan Type [PWM Fan]
Configuration options: [PWM Fan] [DC Fan]
CPU Fan Profile [Standard]
Allows you to set the appropriate performance level of the CPU fan.
[Standard] Sets to [Standard] to make the chassis fan automatically adjust depending on the CPU temperature.
[Silent] Sets to [Silent] to minimize the fan speed for quiet CPU fan
operation.
[Turbo] Set to [Turbo] to achieve maximum CPU fan speed.
[Manual] Sets to [Manual] to display more items for you to manually adjust the CPU upper/lower temperature, and CPU fan upper/ lower duty cycle.
The following four items appear only when you set CPU Fan Profile to [Manual].
Chapter 3: BIOS setup
CPU.Upper.Temperature.[70]
Use the <+> and <-> keys to adjust the upper limit of the CPU temperature. The values range from 20ºC to 75ºC.
CPU.Lower.Temperature.[20]
Displays the lower limit of the CPU temperature.
CPU.Fan.Max..Duty.Cycle(%).[20]
Use the <+> and <-> keys to adjust the Maximum CPU fan duty cycle. The values range from 20% to 100%. When the CPU temperature reaches upper limit, the CPU fan will operate at the maximum duty cycle.
CPU.Fan.Min..Duty.Cycle(%).[20]
Use the <+> and <-> keys to adjust the minimum CPU fan duty cycle. The values range from 20% to 100%. When the CPU temperature is under 40ºC, the CPU fan will operate at the minimum duty cycle.
CPU Fan Speed Low Limit [600 RPM]
Allows you to set the low speed limit of the CPU fan and the system sends warning message when the fan speed drops below the set value.
Configuration options: [Ignored] [100 RPM] [200 RPM] [300 RPM] [400 RPM]
[500 RPM] [600 RPM]
Chassis.Q-Fan.Control.[Disabled]
[Disabled]
[Enabled]
Disables the Chassis Q-Fan control feature.
Enables the Chassis Q-Fan control feature.
Chassis Fan Profile [Standard]
This item appears only when you enable the Chassis Q-Fan Control feature and allows you to set the appropriate performance level of the chassis fan.
[Standard] Sets to [Standard] to make the chassis fan automatically adjust depending on the chassis temperature.
[Silent] Sets to [Silent] to minimize the fan speed for quiet chassis fan operation.
[Turbo] Sets to [Turbo] to achieve maximum chassis fan speed.
[Manual] Sets to [Manual] to assign detailed fan speed control parameters.
The following four items appear only when you set Chassis Fan Profile to
[Manual].
Chassis.Upper.Temperature.[70]
Use the <+> and <-> keys to adjust the upper limit of the CPU temperature. The values range from 40ºC to 90ºC.
Chassis.Lower.Temperature.[40]
Displays the lower limit of the chassis temperature.
Chassis.Fan.Max..Duty.Cycle(%).[60]
Use the <+> and <-> keys to adjust the maximum chassis fan duty cycle. The values range from 60% to 100%. When the chassis temperature reaches upper limit, the chassis fan will operate at the maximum duty cycle.
ROG Crosshair V Formula 3-31
Chassis.Fan.Min..Duty.Cycle(%).[60]
Use the <+> and <-> keys to adjust the minimum chassis fan duty cycle. The values range from 60% to 100%. When the chassis temperature is under 40ºC, the chassis fan will operate at the minimum duty cycle.
Chassis.Fan.Speed.Low.Limit.[600.RPM]
This item appears only when you enable the Chassis Q-Fan Control feature and allows you to disable or set the chassis fan warning speed.
Configuration options: [Ignore] [100 RPM] [200 RPM] [300 RPM] [400 RPM] [500
RPM] [600 RPM]
OPTFAN.1/2/3.Control.[Disabled]
Allows you to select the optional fan control mode. When this item is set to [Duty
Mode], you can configure the OPT.Fan1/2/3.Duty
item. If you set this item to [User
Mode], you are allowed to configure the OPT.Fan1/2/3.Low.Speed.Temp
and
OPT.Fan1/2/3.Full.Speed.Temp
item.
Configuration options: [Disabled] [Duty Mode] [User Mode]
OPTFAN 1/2/3 Low Speed Temp [25˚C]
Allows you to set the temperature at which the power fan rotates at low speed.
This item appears when the OPTFAN1/2/3 Control item is set to [User Mode].
Configuration options: [25˚C] [30˚C] [35˚C] [40˚C]
OPTFAN 1/2/3 Full Speed Temp [60˚C]
Allows you to set the temperature at which the power fan rotates at full speed.
This item appears when the OPTFAN1/2/3 Control item is set to [User Mode].
Configuration options: [60˚C] [70˚C] [80˚C] [90˚C]
3-32 Chapter 3: BIOS setup
3.7 Boot menu
The Boot menu items allow you to change the system boot options.
ROG Crosshair V Formula 3-33
3-34
Bootup.NumLock.State.[On]
[On]
[Off]
Sets the power-on state of the NumLock to [On].
Sets the power-on state of the NumLock to [Off].
Full.Screen.Logo.[Enabled]
[Enabled]
[Disabled]
Enables the full screen logo display feature.
Disables the full screen logo display feature.
Set this item to [Enabled] to use the ASUS MyLogo 3™ feature.
Option.ROM.Messages.[Force.BIOS]
[Force BIOS] The third-party ROM messages will be forced to display during the boot sequence.
[Keep Current] The third-party ROM messages will be displayed only if the thirdparty manufacturer had set the add-on device to do so.
Interrupt.19.Capture.[Disabled]
[Enabled]: Allows option ROMs to trap Int 19.
[Disabled]: Stops option ROMs to trap Int 19.
Setup.Mode.[Advanced.Mode]
[Advanced Mode] Sets Advanced Mode as the default screen for entering the
BIOS setup program.
[EZ Mode] Sets EZ Mode as the default screen for entering the BIOS setup program.
Wait.for.‘F1’.If.Error.[Enabled]
When set to [Enabled], the system waits for the <F1> key to be pressed when error occurs.
Boot.Option.Priorities
These items specify the boot device priority sequence from the available devices.
The number of device items that appears on the screen depends on the number of devices installed in the system.
• To select the boot device during system startup, press <F8> when ASUS
Logo appears.
• To access Windows OS in Safe Mode, do any of the following:
- Press <F8> after POST.
Boot.Override
These items displays the available devices. The number of device items that appears on the screen depends on the number of devices installed in the system.
Click an item to start booting from the selected device.
Chapter 3: BIOS setup
3.8 Tools menu
The Tools menu items allow you to configure options for special functions. Select an item then press <Enter> to display the submenu.
3.8.1.
ASUS.EZ.Flash.2.Utility
Allows you to run ASUS EZ Flash 2 Utility. When you press <Enter> to start the application.
For more details, refer to section 3.10.2 ASUS EZ Flash 2 Utility.
3.8.2.
ASUS.SPD.Information
Allows you to get DRAM SPD information.
ROG Crosshair V Formula 3-35
3.8.3 ASUS O.C. Profile
This item allows you to store or load multiple BIOS settings.
3-36
Add Your CMOS Profile
Allows you to save the current BIOS file to the BIOS Flash. In the Label sub-item, type your profile name and press <Enter>, and then choose a profile number to save your CMOS settings in the Save to Profile sub-item.
Load CMOS Profiles
Allows you to load the previous BIOS settings saved in the BIOS Flash. Press
<Enter>, and choose a profile to load.
Chapter 3: BIOS setup
3.8.4.
GO.Button.File
This menu allows you to set the GO Button files, and load the desired GO Button file.
Scroll down to display the following items:
CPU.Bus/PEG.Frequency;.PCIE.Frequency;.CPU.Ratio;.CPU.Voltage;.
CPU/NB.Voltage;.CPU.VDDA.Voltage;.DRAM.Voltage;.NB.Voltage;.NB.
HT.Voltage;.NB.1.8V.Voltage;.SB.Voltage;.VDD.PCIE;.VDDR
Allows you to use the <+> and <-> keys to adjust the values for each item. Refer to
3.3 Extreme Tweaker Menu for details.
Load.Default
Allows you to load default settings.
Save.Above.Settings
Allows you to save the adjusted values for specific items as a GO Button file.
ROG Crosshair V Formula 3-37
3.9 Exit menu
The Exit menu items allow you to load the optimal default values for the BIOS items, and save or discard your changes to the BIOS items. You can access the
EZ.Mode
from the Exit menu.
3-38
Load.Optimized.Defaults
This option allows you to load the default values for each of the parameters on the
Setup menus. When you select this option or if you press <F5>, a confirmation window appears. Select Yes to load the default values.
Save.Changes.&.Reset
Once you are finished making your selections, choose this option from the Exit menu to ensure the values you selected are saved. When you select this option or if you press <F10>, a confirmation window appears. Select Yes to save changes and exit.
Discard.Changes.&.Exit
This option allows you to exit the Setup program without saving your changes.
When you select this option or if you press <Esc>, a confirmation window appears.
Select Yes to discard changes and exit..
ASUS.EZ.Mode
This option allows you to enter the EZ Mode screen.
Launch EFI Shell from filesystem device
This option allows you to attempt to launch the EFI Shell application (shellx64.efi) from one of the available filesystem devices.
Chapter 3: BIOS setup
3.10 Updating BIOS
The ASUS website publishes the latest BIOS versions to provide enhancements on system stability, compatibility, or performance. However, BIOS updating is potentially risky. If there is no problem using the current version of BIOS, DO.
NOT.manually.update.the.BIOS
. Inappropriate BIOS updating may result in the system’s failure to boot. Carefully follow the instructions of this chapter to update your BIOS if necessary.
Visit the ASUS website (www.asus.com) to download the latest BIOS file for this motherboard.
The following utilities allow you to manage and update the motherboard BIOS setup program.
1. ASUS.Update: Updates the BIOS in Windows ® environment.
2. ASUS.EZ.Flash.2: Updates the BIOS using a USB flash drive.
3. ASUS.BIOS.Updater: Updates and backups the BIOS in DOS environment using the motherboard support DVD and a USB flash disk drive.
Refer to the corresponding sections for details on these utilities.
Save a copy of the original motherboard BIOS file to a USB flash disk in case you need to restore the BIOS in the future. Copy the original motherboard BIOS using the ASUS.Update
or BIOS.Updater
utilities.
ROG Crosshair V Formula 3-39
3.10.1. ASUS.Update.utility
The ASUS Update is a utility that allows you to manage, save, and update the motherboard BIOS in Windows to:
® environment. The ASUS Update utility allows you
• Update the BIOS directly from the Internet
• Download the latest BIOS file from the Internet
• Update the BIOS from an updated BIOS file
• Save the current BIOS file
• View the BIOS version information
This utility is available in the support DVD that comes with the motherboard package.
ASUS Update requires an Internet connection either through a network or an
Internet Service Provider (ISP).
Launching.ASUS.Update
After installing AI Suite II from the motherboard support DVD, launch ASUS
Update by clicking Update.>.ASUS.Update
on the AI Suite II main menu bar.
Quit all Windows ® applications before you update the BIOS using this utility.
Updating.the.BIOS.through.the.Internet
To update the BIOS through the
Internet:
1. From the ASUS Update screen, select Update.BIOS.from.
Internet , and then click Next .
3-40
2. Select the ASUS FTP site nearest you to avoid network traffic.
If you want to enable the BIOS downgradable function and auto
BIOS backup function, check the checkboxs before the two items on the screen.
Chapter 3: BIOS setup
3. Select the BIOS version that you want to download. Click Next .
4. You can decide whether to change the BIOS boot logo, which is the image appearing on screen during the Power-On
Self-Tests (POST). Click Yes if you want to change the boot logo or No to continue.
5. Click Browse to locate your desired picture file.
6. Adjust the picture resolution if needed and click Next to continue.
7. Follow the onscreen instructions to complete the update process.
ROG Crosshair V Formula 3-41
Updating the BIOS through a BIOS file
To update the BIOS through a BIOS file:
1. From the ASUS Update screen, select Update BIOS from file , and then click Next .
2. Locate the BIOS file from the
Open window, click Open , and click Next .
3. You can decide whether to change the BIOS boot logo. Click
Yes if you want to change the boot logo or No to continue.
4. Follow the onscreen instructions to complete the update process.
3-42
• The screenshots in this section are for reference only. The actual BIOS information vary by models.
• Refer to the software manual in the support DVD or visit the ASUS website at www.asus.com for detailed software configuration.
Chapter 3: BIOS setup
3.10.2. ASUS.EZ.Flash.2.Utility
The ASUS EZ Flash 2 Utility feature allows you to update the BIOS without having to use a bootable floppy disk or an OS-based utility.
Before you start using this utility, download the latest BIOS from the ASUS website at www.asus.com.
To update the BIOS using EZ Flash 2 Utility:
1. Insert the USB flash disk that contains the latest BIOS file to the USB port.
2. Enter the Advanced Mode of the BIOS setup program. Go to the Tool menu to select ASUS.EZ.Flash.2.Utility
and press <Enter> to enable it.
3. Press <Tab> to switch to the Drive field.
4. Press the Up/Down arrow keys to find the USB flash disk that contains the latest BIOS, and then press <Enter>.
5. Press <Tab> to switch to the Folder.Info
field.
6. Press the Up/Down arrow keys to find the BIOS file, and then press <Enter> to perform the BIOS update process. Reboot the system when the update process is done.
ROG Crosshair V Formula 3-43
• This function can support devices such as a USB flash disk with FAT 32/16 format and single partition only.
• DO NOT shut down or reset the system while updating the BIOS to prevent system boot failure!
Ensure to load the BIOS default settings to ensure system compatibility and stability. Select the Load Optimized Defaults item under the Exit menu. See section 3.9.Exit.Menu
for details.
3-44 Chapter 3: BIOS setup
3.10.3. ASUS.BIOS.Updater
The ASUS BIOS Updater allows you to update BIOS in DOS environment. This utility also allows you to copy the current BIOS file that you can use as a backup when the BIOS fails or gets corrupted during the updating process.
The succeeding utility screens are for reference only. The actual utility screen displays may not be same as shown.
Before.updating.BIOS.
1. Prepare the motherboard support DVD and a USB flash drive in FAT32/16 format and single partition.
2. Download the latest BIOS file and BIOS Updater from the ASUS website at http://support.asus.com and save them on the USB flash drive.
• NTFS is not supported under DOS environment. Do not save the BIOS file and BIOS Updater to a hard disk drive or USB flash drive in NTFS format.
• Do not save the BIOS file to a floppy disk due to low disk capacity.
3. Turn off the computer and disconnect all SATA hard disk drives (optional).
Booting.the.system.in.DOS.environment
1. Insert the USB flash drive with the latest BIOS file and BIOS Updater to the
USB port.
2. Boot your computer. When the ASUS Logo appears, press <F8> to show the BIOS.Boot.Device.Select.Menu
. Insert the support DVD into the optical drive and select the optical drive as the boot device.
Please select boot device:
SATA: XXXXXXXXXXXXXXXX
USB XXXXXXXXXXXXXXXXX
UEFI: XXXXXXXXXXXXXXXX
Enter Setup
↑
and
↓
to move selection
ENTER to select boot device
ESC to boot using defaults
3. When the Make.Disk
menu appears, select the FreeDOS.command.prompt
item by pressing the item number.
4. At the FreeDOS prompt, type d: and press <Enter> to switch the disk from
Drive C (optical drive) to Drive D (USB flash drive).
Welcome to FreeDOS (http://www.freedos.org)!
C:\>d:
D:\>
ROG Crosshair V Formula 3-45
3-46
Backing.up.the.current.BIOS
To backup the current BIOS file using the BIOS Updater
Ensure that the USB flash drive is not write-protected and has enough free space to save the file.
1. At the FreeDOS prompt, type bupdater /o[filename] and press <Enter>.
D:\>bupdater /oOLDBIOS1.rom
Filename Extension
The [filename] is any user-assigned filename with no more than eight alphanumeric characters for the filename and three alphanumeric characters for the extension.
2. The BIOS Updater backup screen appears indicating the BIOS backup process. When BIOS backup is done, press any key to return to the DOS prompt.
ASUSTek BIOS Updater for DOS V1.18 [2011/04/08]
Current ROM
BOARD: Crosshair V Formula
VER: 0239
DATE: 08/04/2011
PATH: A:\
Update ROM
BOARD: Unknown
VER: Unknown
DATE: Unknown
BIOS backup is done! Press any key to continue.
Note
Saving BIOS:
Chapter 3: BIOS setup
Updating the BIOS file
To update the BIOS file using BIOS Updater
1. At the FreeDOS prompt, type bupdater /pc /g and press <Enter>.
D:\>bupdater /pc /g
2. The BIOS Updater screen appears as below.
ASUSTek BIOS Updater for DOS V1.18 [2011/04/08]
Current ROM
BOARD: Crosshair V Formula
VER: 0204
DATE: 08/04/2011
PATH:
A:
A:\
Update ROM
BOARD:
VER:
DATE:
Unknown
Unknown
Unknown
P8P67D.ROM 4194304 2010-08-05 17:30:48
Note
[Enter] Select or Load [Tab] Switch [V] Drive Info
[Up/Down/Home/End] Move [B] Backup [Esc] Exit
3. Press <Tab> to switch between screen fields and use the <Up/Down/Home/
End> keys to select the BIOS file and press <Enter>. BIOS Updater checks the selected BIOS file and prompts you to confirm BIOS update.
Are you sure to update BIOS?
Yes No
4. Select Yes and press <Enter>. When BIOS update is done, press <ESC> to exit BIOS Updater. Restart your computer.
DO NOT shut down or reset the system while updating the BIOS to prevent system boot failure!
• For BIOS Updater version 1.04 or later, the utility automatically exits to the
DOS prompt after updating BIOS.
• Ensure to load the BIOS default settings to ensure system compatibility and stability. Select the Load.Optimized.Defaults
item under the .Exit
BIOS menu. See Chaper 3 of your motherboard user manual for details.
• Ensure to connect all SATA hard disk drives after updating the BIOS file if you have disconnected them.
ROG Crosshair V Formula 3-47
3-48 Chapter 3: BIOS setup
This chapter describes the contents of the support DVD that comes with the motherboard package and the software.
4
support
Chapter summary
4
Installing.an.operating.system.................................................... 4-1
Support.DVD.information............................................................. 4-1
Software.information.................................................................... 4-8
4.4.
RAID configurations................................................................... 4-38
Creating.a.RAID.driver.disk........................................................ 4-43
ROG Crosshair V Formula
4.1 Installing an operating system
This motherboard supports Windows the features of your hardware.
® XP/64-bit XP/Vista/7 operating systems
(OS). Always install the latest OS version and corresponding updates to maximize
• Motherboard settings and hardware options vary. Use the setup procedures presented in this chapter for reference only. Refer to your OS documentation for detailed information.
• Ensure that you install Windows ® XP Service Pack 3 or later versions before installing the drivers for better compatibility and system stability.
4.2 Support DVD information
The support DVD that came with the motherboard package contains the drivers, software applications, and utilities that you can install to avail all motherboard features.
The contents of the support DVD are subject to change at any time without notice. Visit the ASUS website at www.asus.com for updates.
4.2.1.
Running.the.support.DVD
Place the support DVD to the optical drive. The DVD automatically displays the
Drivers menu if Autorun is enabled in your computer.
Click.an.icon.to.
display.support.
DVD/motherboard.
information
Click.an.item.to.install
If Autorun is NOT enabled in your computer, browse the contents of the support
DVD to locate the file ASSETUP.EXE from the BIN folder. Double-click the
ASSETUP.EXE to run the DVD.
ROG Crosshair V Formula 4-1
4.2.2.
Drivers.menu
The drivers menu shows the available device drivers if the system detects installed devices. Install the necessary drivers to activate the devices.
4-2
AMD.Chipset.Driver
Installs the AMD ® chipset driver.
Realtek.Audio.Driver
Installs the Realtek ® audio driver and application.
ASUS.ROG.THUNDERBOLT.Audio.Driver
Installs the ASUS ROG ThunderBolt audio driver and application.
ASUS.ROG.THUNDERBOLT.LAN.Driver
Installs the ASUS ROG ThunderBolt LAN driver and application.
Browser Configuration Utility
Installs the browser configuration utility.
USB.3.0.Driver
Installs the USB 3.0 driver.
Asmedia.SATA.Controller.Driver
Installs the Asmedia SATA Controller driver.
The ASUS ROG THUNDERBOLT Audio/LAN Drivers appear only when ROG
ThunderBolt has been installed in the system.
Chapter 4: Software support
4.2.3.
Utilities.menu
The Utilities menu shows the applications and other software that the motherboard supports.
ASUS.AI.Suite.II
Installs the ASUS AI Suite II.
ASUS.ROG.Connect
Installs the ASUS ROG Connect utility.
ASUS.ROG.Connect.Plus
Installs the ASUS ROG Connect Plus utility.
ASUS.ROG.GameFirst
Installs the ASUS ROG GameFirst utility.
AMD.OverDrive.Utility.(AOD)
Installs the AMD ® OverDrive utility.
Sound.Blaster.X-Fi.MB.2
Installs the Sound Blaster X-Fi MB 2 utility.
Adobe.Reader.9
Installs the Adobe ® Reader that allows you to open, view, and print documents in
Portable Document Format (PDF).
Anti-Virus.Utility
The anti-virus application scans, identifies, and removes computer viruses. View the online help for detailed information.
ROG Crosshair V Formula 4-3
4-4
4.2.4.
Make.disk.menu
The Make disk menu contains items to create the AMD AHCI/RAID 32/64bit driver disk.
AMD.AHCI/RAID.Driver.Disk
Allows you to create an AMD AHCI/RAID driver disk.
4.2.5.
Manual.menu
The Manuals menu contains a list of supplementary user manuals. Click an item to open the folder of the user manual.
Most user manual files are in Portable Document Format (PDF). Install the
Adobe file.
® Acrobat ® Reader from the Utilities menu before opening a user manual
Chapter 4: Software support
4.2.6.
Video.menu
Click the Video tab to display a list of video clips. Click the video titles to watch
ROG users’ outstanding performances with ROG motherboards.
4.2.7.
ASUS.Contact.information
Click the Contact tab to display the ASUS contact information.
ROG Crosshair V Formula 4-5
4.2.8.
Other.information
The icons on the top right corner of the screen give additional information on the motherboard and the contents of the support DVD. Click an icon to display the specified information.
Motherboard.Info
Displays the general specifications of the motherboard.
Browse.this.DVD
Displays the support DVD contents in graphical format.
4-6 Chapter 4: Software support
Filelist
Displays the contents of the support DVD and a brief description of each in text format.
ROG Crosshair V Formula 4-7
4-8
4.3 Software information
Most of the applications in the support DVD have wizards that will conveniently guide you through the installation. View the online help or readme file that came with the software application for more information.
4.3.1.. ASUS.AI.Suite.II
ASUS AI Suite II allows you to launch several ASUS utilities easily.
Installing.AI.Suite.II
To install AI Suite II on your computer:
1. Place the support DVD to the optical drive. The Drivers installation tab appears if your computer has an enabled Autorun feature.
2. Click the Utilities tab, then click AI.Suite.II
.
3. Follow the screen instructions to complete installation.
Launching.AI.Suite.II
You can launch AI Suite II right after installation or anytime from the Windows ® desktop.
To launch AI Suite from the Windows ® desktop, click Start > All.Programs
> .
ASUS.
> AI.Suite.II
> AI.Suite.II.v1.xx.xx
. The AI Suite II main window appears.
After launching the application, the AI Suite II icon appears in the Windows ® notification area. Click the icon to close or restore the application.
Using.AI.Suite.II
Click each button to select and launch a desired utility, to monitor or update the system, to display the system information and to customize your settings.
The screenshots of AI Suite II in this user manual are for regerence only. The actual screenshots vary with models.
Chapter 4: Software support
4.3.2.
Tool
TurboV.EVO
ASUS TurboV EVO introduces Manual Mode that allows you to manually adjust the CPU frequency and related voltages as well as Auto Tuning function that offers automatic and easy overlocking and system level up. After installing AI Suite II from the motherboard support DVD, launch TurboV EVO by clicking Tool.>.TurboV.
EVO on the AI Suite II main menu bar.
Refer to the software manual in the support DVD or visit the ASUS website at www.asus.com for detailed software configuration.
Manual.Mode
Manual Mode allows you to overclock the BCLK frequency, CPU voltage, IMC voltage, and DRAM Bus voltage in WIndows® environment and takes effect in real-time without exiting and rebooting the OS.
Refer to the CPU documentation before adjusting CPU voltage settings. Setting a high voltage may damage the CPU permanently, and setting a low voltage may make the system unstable.
For system stability, all changes made in TurboV will not be saved to BIOS settings and will not be kept on the next system boot. Use the Save Profile function to save your customized overclocking settings and manually load the profile after Windows starts.
Auto.Tuning.Mode
Manual.Mode
Target.values
Current.values
Click.to.show./.hide.
more.settings
Save.the.current.
settings.as.a.new.
profile
Voltage.
Adjustment bars
Click.to.restore.all.
start-up.settings
Undoes.all.changes.
without.applying
Applies.all.changes.
immediately
For advanced overclock ability, adjust first the BIOS items, and then proceed more detailed adjustments in More Settings.
ROG Crosshair V Formula 4-9
4-10
Using.Advanced.Mode
Click More.Settings
, and then click the Advanced.Mode
tab to adjust the advanced voltage settings.
Current.values
Click.to.restore.
all.start-up.
settings
Voltage.
Adjustment bars
Undoes.all.changes.
without.applying
Applies.all.changes.
immediately
CPU.Ratio
Allows you to manually adjust the CPU ratio.
1. Click More.Settings
, and then click the CPU.Ratio
tab.
2. Drag the adjustment bar upwards or downwards to the desired value.
3. You will requested to restart the system. Click Yes to make the change take effect.
Chapter 4: Software support
CPU.Ratio
Adjustment bar
Click.to.restore.
all.start-up.
settings
Applies.all.changes.
immediately
Undoes.all.changes.
without.applying
• Set the CPU Ratio Setting item in BIOS to [Auto] before using the CPU
Ratio function in TurboV. Refer to Chapter 3 of your motherboard user manual for details.
• The CPU Ratio bars show the status of the CPU cores, which vary with your CPU model.
Auto.Tuning
ASUS TurboV EVO includes two auto tuning modes, providing the most flexible auto-tuning options.
• The overclocking result varies with the CPU model and the system configuration.
• To prevent overheating from damaging the motherboard, a better thermal environment is strongly recommended.
• Fast Tuning: fast CPU overclocking
• Extreme Tuning: extreme overclocking for CPU and memory
Using Fast Tuning
1. Click the Auto.Tuning
tab and then click Fast .
2. Read through the warning messages and click OK to start auto-overclocking.
ROG Crosshair V Formula 4-11
4-12
3. TurboV automatically overclocks the CPU, saves
BIOS settings and restarts the system. After re-entering
Windows, a message appears indicating auto tuning success. Click OK to exit.
Using Extreme Tuning
1. Click the Auto Tuning tab and then click Extreme .
2. Read through the warning messages and click OK to start auto-overclocking.
3. TurboV automatically overclocks the CPU and memory and restarts the system. After re-entering
Windows, a message appears indicating the current overclocking result.
To keep the result, click
Stop .
Chapter 4: Software support
4. If you did not click Stop in the previous step, TurboV automatically starts further system overclocking and stability test. An animation appears indicating the overclocking process. Click
Stop if you want to cancel the
Overclocking process.
5. TurboV automatically adjusts and saves BIOS settings and restarts the system.
After re-entering Windows, a message appears indicating auto tuning success. Click
OK to exit.
ROG Crosshair V Formula 4-13
4.3.3.
DIGI+.VRM
ASUS DIGI+ VRM allows you to adjust VRM voltage and frequency modulation to enhance reliability and stability. It also provides the highest power efficiency, generating less heat to longer component lifespan and minimize power loss.
After installing AI Suite II from the motherboard support DVD, launch DIGI+ VRM by clicking Tool.>.DIGI+.VRM
on the AI Suite II main menu bar.
C o n f i g u r a t i o n.
items.and.options
Application.helps
Apply.all.changes.
immediately
Undo.all.changes.
without.applying
4-14
Introduction on DIGI+ VRM Configuration Items
CPU.Load-line.Calibration
Load-line is defined by AMD ® VRM spec and affects CPU voltage. The
CPU working voltage will decrease proportionally to CPU loading. Higher load-line calibration could get higher voltage and good overclocking performance but increase the CPU and
VRM thermal.
• Regular: 0%
• Medium: 25%
• High: 50%
• Ultra High: 75%
• Extreme: 100%
• The actual performance boost may vary depending on your CPU specification.
• Do not remove the thermal module. The thermal conditions should be monitored.
Chapter 4: Software support
CPU.Current.Capability
CPU Current Capability provides wider total power range for overclocking. A higher value setting gets higher VRM power consumption delivery.
A higher value brings a wider total power range and extends the overclocking frequency range simultaneously.
Suggestion: choose higher value when overclocking or under high CPU loading for extra power support.
CPU.Voltage.Frequency
Switching frequency will affect the VRM transient response and component thermal. Higher frequency gets quicker transient response.
Enable Spread Spectrum to enhance system stability.
• VRM Fixed Frequency Range:
300–550kHz
• Manual Frequency Step: 10kHz
Do not remove the thermal module when switching to Manual mode. The thermal conditions should be monitored.
ROG Crosshair V Formula 4-15
CPU/NB.Load-line.Calibration
Load-line is defined by AMD VRM spec and affects CPU/NB voltage. The
CPU/NB working voltage will decrease proportionally to CPU/NB loading.
Higher load-line calibration could get higher voltage and good overclocking performance but increase the CPU/NB and VRM thermal.
• Regular: 0%
• High: 50%
• Extreme: 100%
• The actual performance boost may vary depending on your CPU specification.
• Do not remove the thermal module. The thermal conditions should be monitored.
4-16
CPU/NB.Current.Capability
CPU/NB Current Capability provides wider total power range for overclocking.
A higher value setting gets higher VRM power consumption delivery.
A higher value brings a wider total power range and extends the overclocking frequency range simultaneously.
Suggestion: choose higher value when overclocking or under high CPU loading for extra power support.
Chapter 4: Software support
CPU.Power.Phase.Control
Phase number is the number of working
VRM phase. Increase phase number under heavy system loading to get more transient and better thermal performance.
Reduce phase number under light system loading to increase VRM efficiency.
• Standard : Phase control based on
CPU command.
• Optimized : ASUS optimized phase tuning profile
• Extreme : Full phase mode
• Manual Adjustment : Phase number adjusted by current (A) step
Do not remove the thermal module when switching to Extreme and Manual mode. The thermal conditions should be monitored.
CPU.Power.Duty.Control
CPU Power Duty Control adjusts the current of every VRM phase and the thermal of every phase component.
Select the [T.Probe] option to maintain
VRM thermal balance or the [Extreme] option to maintain VRM current balance.
• T.Probe
: Thermal balance
• Extreme : Current balance
Do not remove the thermal module. The thermal conditions should be monitored.
ROG Crosshair V Formula 4-17
4.3.4.
EPU
EPU is an energy-efficient tool that satisfies different computing needs. This utility provides several modes that you can select to save system power. Selecting
Auto mode will have the system shift modes automatically according to current system status. You can also customize each mode by configuring settings like CPU frequency, GPU frequency, vCore Voltage, and Fan Control.
Launching.EPU
After installing AI Suite II from the motherboard support DVD, launch EPU by clicking Tool.>.EPU
on the AI Suite II main menu bar.
Displays.the.following.
message.if.no.VGA.power.
saving.engine.is.detected.
4-18
Displays.current.mode
The.items.lighting.up.means.
power.saving.engine.is.
activated
Displays.the.amount.of.CO2.
reduced
*Shifts.between.the.display.of.
Total.and.Current.CO2.reduced
Displays.the.
current.CPU.power
Advanced.settings.for.each.mode
vCore.Voltage.Downgrade.
Adjustment bars.
Multiple.system.
operating.modes
*• Select From EPU Installation to show the CO2 that has been reduced since you installed EPU.
*• Select From the Last Reset to show the total CO2 that has been reduced since you click the Clear button .
• Refer to the software manual in the support DVD or visit the ASUS website at www.asus.com for detailed software configuration.
Chapter 4: Software support
4.3.5.
FAN.Xpert
FAN Xpert allows you to adjust both the CPU and chassis fan speeds according to different ambient temperatures and your PC’s system loading. The various fan profiles offer flexible controls of fan speeds to achieve a quiet and cool system environment.
Launching.FAN.Xpert
After installing AI Suite II from the motherboard support DVD, launch FAN Xpert by clicking Tool.>.Fan.Xpert
on the AI Suite II main window.
Using.FAN.Xpert
Click Fan.Name
to select a fan to test the speed or click Setting to select a preset mode for your selected fan.
Setting
• Disable : disables the Fan Xpert function.
• Standard : adjusts fan speed in a moderate pattern.
• Silent : minimizes fan speed for quiet fan operation.
• Turbo : maximizes the fan speed for the best cooling effect.
• User : Allows you to configure the CPU fan profile under certain limitations.
ROG Crosshair V Formula 4-19
4.3.6.
Probe.II
Probe II is a utility that monitors the computer’s vital components, and detects and alerts you of any problem with these components. Probe II senses fan rotations,
CPU temperature, and system voltages, among others. Because Probe II is software-based, you can start monitoring your computer the moment you turn it on. With this utility, you are assured that your computer is always at a healthy operating condition.
Launching.Probe.II
After installing AI Suite II from the motherboard support DVD, launch PC Probe II by clicking Tool.>.Probe.II
on the AI Suite II main window.
Monitoring.hardware
The hardware monitor panels display the current value of a system sensor such as fan rotation, CPU temperature, and voltages. Click the tab on the top to switch display content. Click the box before each sensor to enable the alert function.
Adjusting the sensor threshold value
You can adjust the sensor threshold value in the monitor panel by moving the sliders.
4-20 Chapter 4: Software support
Setting.preference
Click Preference on the top to customize Probe.II
, including detection cycle, and temperature display unit.
Checking.Alert.Log
Click Alert.Log
on the top to check the log. Click Clear to reset the log if needed.
ROG Crosshair V Formula 4-21
4-22
4.3.7.
Sensor.Recorder
Sensor Recorder allows you to monitor the changes in the system voltage, temperature, and fan speed, as well as recording the changes.
Launching.Sensor.Recorder
After installing AI Suite II from the motherboard support DVD, click Tool.>.Sensor.
Recorder on the AI Suite II main menu bar to launch PC Probe II.
Configuring Sensor Recorder
Click the Voltage/Temperature/Fan.Speed
tabs and select the sensors that you want to monitor. The History Record tab allows you to record the changes in the sensors that you enable.
Select.the.
sensors.that.
you.want.to.
monitor
Drag.to.view.
the.status.
during.a.
certain.period.
of.time
Click.to.return.to.
the.default.mode
Click.to.zoom.in/out.the.Y.axis
Click.to.zoom.in/out.the.X.axis
Chapter 4: Software support
Voltage
The Voltage tab displays the status of the system voltages. Select the items that you want to monitor.
Temperature
The Temperature tab displays the status of the CPU and motherboard temperatures. Select the items that you want to monitor.
Fan Speed
The Fan Speed tab displays the status of the rotations (per minute) of the CPU, chassis, and power fans. Select the items that you want to monitor.
ROG Crosshair V Formula 4-23
History Record
The History Record tab allows you to record the changes in the system.
4-24
.
To.use.the.recording.function
1. Select the sensor type, and then select the sensors whose changes you want to record.
2. Select the record interval and duration.
3. Click Start.recording
. To stop, click Recording while the recording is in progress.
To edit the recorded history
• Select a date to view a certain recorded history.
• If you want to delete a recorded history, click beside the date of the selected recorded history to clear it.
Chapter 4: Software support
4.3.8.
ROG.Connect
ROG Connect allows you to monitor and adjust the local PC through your remote
PC.
Setting.up.USB.connection.between.your.local.and.remote.PC
• Install ROG Connect on the remote PC from the provided Support DVD before using ROG Connect.
• ROG Connect must work with ROG Connect Plus to avail full function.
Ensure that you install ROG Connect Plus on your local PC from the provided Support DVD before using ROG Connect.
1. Connect the provided ROG Connect cable to the local PC and the remote
PC.
2. Switch on the ROG Connect switch on the board.
3. Double-click the RC TweakIt shortcut on the remote PC to activate the function
Using.RC.TweakIt
Use the sliders and buttons to monitor or adjust your local PC.
ROG Crosshair V Formula 4-25
4-26
Click Function to display more options.
RC.Poster
RC Poster shows the status of the local system during the POST. You can switch the display mode between String and
Code.
RC.Remote
RC Remote allows you to operate your local system through the ROG Connect cable.
RC.Diagram
RC Diagram allows you to monitor and record your local system status.
Chapter 4: Software support
GPU.TweakIt
GPU TweakIt allows you to control and monitor the installed GPU on the local system. Use the sliders to adjust the values and click Apply to save your customized settings.
ROG Crosshair V Formula 4-27
4.3.9.
ROG.ThunderBolt.LAN
Bigfoot.Killer.Network.Manager
1. Double-click Bigfoot Killer Network Manager on the desktop.
2. Ensure that you have connected to the internet and click
Start to perform the bandwidth test.
Network
Click the Network tab on the left to configure your network settings.
4-28
ROG ThunderBolt is only available on selected model.
Chapter 4: Software support
Advanced
Click the Advanced tab on the left to configure Killer Network Manager settings.
You can select the display information, set up the application control, and other configurations.
Overviews
Click the Overview tab on the left to see the system information and the current status of the network connection.
ROG Crosshair V Formula 4-29
PC.Monitor
Click the PC Monitor tab on the left to monitor and record the performance of your system. Click View Type to select a desired device for monitoring.
Applications
Click the Applications tab on the left to see the network usage of each applications.
4-30
To see the network usage of the applications, you have to enable the application control first. Click the Advanced tab and enable the Application Control.
Chapter 4: Software support
4.3.10. ThunderBolt.Audio
Double-click ROG ThunderBolt Audio on the desktop.
Main.Control.Panel
Link.to.ROG.
official website
Switch.the.
display.panel
Configure the Settings
Adjust the volume
Activate.DS3D.GX
Enable.SVN
Select.and.switch.
the.audio.output.and.
input.device
Configuration area
• SVN (Smart Volume Normalization): Enable this function to avoid large volume fluctuations.
• DS3D GX: Enable DirectSound3D Game Extensions to support EAX and
DirectSound3D extensions for EAX and DS3D games on Windows.
• If you connect your speakers or headphone to the audio jack of the ThunderBolt bracket, select Speakers as your default audio output device.
• If you connect your speakers or headphone to the audio jack of the chassis front panel, select Headphone as your default audio output device.
ROG ThunderBolt is only available on selected model.
ROG Crosshair V Formula 4-31
4-32
Game Profiles
Click the Switch to switch the panel from Status Panel to the Game Profiles Panel.
Click the plus sign (+) to add your customized profiles or the minus sign (-) to delete unwanted profiles.
Switch to the corresponding game profile according to the game you play.
Add or Delete a profile
FPS.Mode.(First.Person.Shooter.mode)
HiFi.Mode
Racing.Mode
RTS.Mode.(Real-Time.Strategy.mode)
Manual.(You.customized.mode)
Switches.the.display.panel
Chapter 4: Software support
Audio.output
Click the corresponding box to select from Speakers, Headphones, and SPDIF-Out for the output device. Click each button directly to configure the related settings.
Headphone Settings
Click Headphone and select Headphone Settings to do the gain adjustment.
Select the gain tuning according to your headphone impedance.
A wrong gain tuning setting may damage your headphone. Select a proper gain according to your headphone specification.
Only audio output from the front panel via the AAFP cable supports the headphone gain tuning function.
ROG Crosshair V Formula 4-33
Xear Surround Effect
Click Headphone and select Xear Surround Effect to enable the Xear
Surround Effect.
Ensure to select a proper Room Size for a better surround effect.
Audio.input
Click the corresponding box to select from Mic and Line-In for the input device.
Click each button directly to configure the related settings.
4-34 Chapter 4: Software support
4.3.11. Sound.Blaster.X-Fi.MB.2.
This application is available only under Windows Vista and Windows 7 operating system.
This installation requires that you have the latest version of the Windows Media
Player installed on your system. Ensure to download and install the latest
Windows Media Player before installing Sound Blaster X-Fi MB 2.
The onboard 8-channel HD audio (High Definition Audio, previously code-named
Azalia) CODEC enables high-quality 192KHz/24-bit audio output, jack-sensing feature, retasking functions and multi-streaming technology that simultaneously sends different audio streams to different destinations.
Activating.Sound.Blaster.X-Fi.MB.2
After installing Sound Blaster X-Fi MB 2 successfully, you need to activate this utility online before first use.
1. Double-click Activate on the desktop.
Ensure that you have successfully installed the LAN driver and have connected to the Internet.
2. Click Activate to start activation.
ROG Crosshair V Formula 4-35
4-36
Using.Sound.Blaster.X-Fi.MB.2
Speaker and Headphone
You can adjust the speaker-related or the headphone-related configurations.
Environment audio extensions
(EAX)
After enabling the EAX effects, you are allowed to select and add your desired environment sounds into the music.
Speaker.and.Headphone
EAX
Equalizer
Mixer
THX
Adjusting Volume
Restoring.to.the.Default
Mute
Chapter 4: Software support
Equalizer
You can manually adjust the audio frequency with the equalizer and customize your presets for later use.
Mixer
You can manually adjust the audio volumes, including Line In,
Stereo Mix and Microphone, when recording or during the playback.
THX
THX is a high-fidelity sound technology that allows you to adjust the surround sound effect, sub-woofer volume, etc..
ROG Crosshair V Formula 4-37
4-38
4.4 RAID configurations
The motherboard comes with the AMD ® SB950 chipset that allows you to configure
Serial ATA hard disk drives as RAID sets. The motherboard supports the following
RAID configurations: RAID 0, RAID 1, RAID 5 and RAID 10.
• You must install Windows ® XP Service Pack 2 or later versions before using
Serial ATA hard disk drives. The Serial ATA RAID feature is available only if you are using Windows ® XP SP2 or later versions.
• Due to Windows ® XP / Vista limitation, a RAID array with the total capacity over 2TB cannot be set as a boot disk. A RAID array over 2TB can only be set as a data disk only.
• If you want to install a Windows ® operating system to a hard disk drive included in a RAID set, you have to create a RAID driver disk and load the
RAID driver during OS installation. Refer to section 4.5.Creating.a.RAID.
driver.disk
for details.
4.4.1 RAID definitions
RAID.0.(Data.striping) optimizes two identical hard disk drives to read and write data in parallel, interleaved stacks. Two hard disks perform the same work as a single drive but at a sustained data transfer rate, double that of a single disk alone, thus improving data access and storage. Use of two new identical hard disk drives is required for this setup.
RAID.1.(Data.mirroring) copies and maintains an identical image of data from one drive to a second drive. If one drive fails, the disk array management software directs all applications to the surviving drive as it contains a complete copy of the data in the other drive. This RAID configuration provides data protection and increases fault tolerance to the entire system. Use two new drives or use an existing drive and a new drive for this setup. The new drive must be of the same size or larger than the existing drive.
RAID.5
stripes both data and parity information across three or more hard disk drives. Among the advantages of RAID 5 configuration include better
HDD performance, fault tolerance, and higher storage capacity. The RAID
5 configuration is best suited for transaction processing, relational database applications, enterprise resource planning, and other business systems. Use a minimum of three identical hard disk drives for this setup.
RAID.10
is data striping and data mirroring combined without parity (redundancy data) having to be calculated and written. With the RAID 10 configuration you get all the benefits of both RAID 0 and RAID 1 configurations. Use four new hard disk drives or use an existing drive and three new drives for this setup.
Chapter 4: Software support
4.4.2.
Installing.Serial.ATA.hard.disks
The motherboard supports Serial ATA hard disk drives. For optimal performance, install identical drives of the same model and capacity when creating a disk array.
To install the SATA hard disks for a RAID configuration:
1. Install the SATA hard disks into the drive bays.
2. Connect the SATA signal cables.
3. Connect a SATA power cable to the power connector on each drive.
4.4.3.
Setting.the.RAID.item.in.BIOS
You must enable the RAID function in the BIOS Setup before creating RAID volume(s) using SATA HDDs. To do this:
1. Enter the BIOS Setup during POST.
2. Go to the Advanced menu > SATA Configuration , and then press <Enter>.
3. Set the SATA.Port1-Port4 item to [RAID].
4. Save your changes, and then exit the BIOS Setup.
Refer to Chapter 3 for details on entering and navigating through the BIOS
Setup.
When setting the SATA.Port1-Port4 item to [RAID], all four SATA ports run at
RAID mode. However, you can set the SATA ports 5 and 6 to [IDE] mode. See section 3.5.4 SATA Configuration for details.
ROG Crosshair V Formula 4-39
4.4.4.
AMD
®
.Option.ROM.Utility
AMD ®
1. Boot up your computer.
2. During POST, press <Ctrl> + <F> to display the utility main menu.
Option ROM Utility (c) 2009 Advanced Micro Devices, Inc.
[ Main Menu ]
View Drive Assignments .......
[ 1 ]
LD View / LD Define Menu ......
[ 2 ]
Delete LD Menu ...............
[ 3 ]
Controller Configuration ......
[ 4 ]
4-40
Press 1..4 to Select Option
[ Keys Available ]
[ESC] Exit
The Main Menu allows you to select an operation to perform. The Main Menu options include:
• View.Drive.Assignments:.
shows the status of the hard disk drives.
• LD View / LD Define Menu� displays the existing RAID set information / creates a
RAID 0, RAID 1, RAID 5 or RAID 10 configuration.
• Delete.LD.Menu:.
deletes a selected RAID set and partition.
• Controller Configuration� shows the system resources configuration.
Press <1>, <2>, <3>, or <4> to enter the option you need; press <ESC> to exit the utility.
The RAID BIOS setup screens shown in this section are for reference only, and may not exactly match the items on your screen.
To create a RAID volume using more than four hard disk drives, ensure that the
SATA connectors 5/6 are set to [RAID] mode.
Chapter 4: Software support
Creating.a.RAID.volume
To create a RAID volume:
1. In the Main Menu, press <2> to enter the LD View / LD Define Menu function.
2. Press <Ctrl> + <C>, and the following screen appears.
Option ROM Utility (c) 2009 Advanced Micro Devices, Inc.
[ LD Define Menu ]
LD No LD Name RAID Mode Drv
LD 1 Logical Drive 1
Strip Block 64 KB
Gigabyte Boundary ON
RAID 0 2
Fast Init ON
Cache Mode WriteThru
[ Drives Assignments ]
Port:ID Drive Model Capabilities Capacity(GB) Assignment
01:00 xxxxxxxxx
02:00 xxxxxxxxx
03:00 xxxxxxxxx
04:00 xxxxxxxxx
xxxxxxx
xxxxxxx
xxxxxxx
xxxxxxx
xxxxxx
xxxxxx
xxxxxx
xxxxxx
Y
Y
N
N
[ Keys Available ]
[ ↑ ] Up [ ↓ ] Down [PaUp/PaDn] Switch page [Space] Change Option
[Ctrl-Y] Save [ESC] Exit
3. Move to the RAID.Mode
item and press <Space> to select a RAID mode to create.
4. Move to the Assignment item by using the down arrow key and set Y to select the hard disk drives you want to include in the RAID set.
5. Press <Ctrl> + <Y> to save the setting.
The utility prompts the following message. Press <Ctrl> + <Y> to input the LD name.
Please press Ctrl-Y key to input the LD Name or press any key to exit.
If you do not input any LD name, the default LD name will be used.
Enter the LD name here:
Press <Ctrl> + <Y> to erase the MBR, or you may press any key to abort the settings.
Fast Initialization Option has been selected
It will erase the MBR data of the disks.
<Press Ctrl-Y Key if you are sure to erase it>
<Press any other key to ignore this option>
9. Press <Ctrl> + <Y> to enter the screen to modify the array capacity, or press any key to use the maximum capacity.
ROG Crosshair V Formula 4-41
Deleting a RAID configuration
Take caution when deleting a RAID volume. You will lose all data on the hard disk drives when you delete a RAID volume.
To delete a RAID volume:
1. In the Main Menu, press <3> to enter the Delete.LD
function.
2. Select the RAID item you want to delete and press <Del> or <Alt> + <D>.
Option ROM Utility (c) 2009 Advanced Micro Devices, Inc.
[ Delete LD Menu ]
LD No RAID Mode Drv Capacity(GB) Status
LD 1 RAID 0 2 xxxxxx Functional
4-42
[ Keys Available ]
[ ↑ ] Up [ ↓ ] Down [PaUp/PaDn] Switch page [Del/Alt+D] Delete LD
3. The utility prompts the following messages:
Press Ctrl-Y to delte the data in the disk! or press any other key to abort...
Press <Ctrl> + <Y> to delete the RAID volume.
Dispalying.a.RAID.set.information
To display a RAID set information:
1. In the Main Menu, press <2> to enter the “LD View / LD Define Menu” function.
2. Select a RAID item and press <Enter> to display its information.
Option ROM Utility (c) 2009 Advanced Micro Devices, Inc.
[ View LD Defination Menu ]
LD No LD Name RAID Mode Drv Capacity(GB)
LD 1 xxxxx RAID 0 2 157.99
Strip Block 64 KB Cache Mode WriteThru
[ Drives Assignments ]
Port:ID Drive Model Capabilities Capacity(GB)
01:00 xxxxxxxxx
02:00 xxxxxxxxx
xxxxxxx
xxxxxxx
xxxxxx
xxxxxx
Any Key To Continue.......
Chapter 4: Software support
4.5 Creating a RAID driver disk
A floppy disk with the RAID driver is required when installing Windows ® XP operating system on a hard disk drive that is included in a RAID set. For Windows ®
Vista or later operating systems, use either a USB flash drive with the RAID driver or the support DVD.
• The motherboard does not provide a floppy drive connector . You have to use a USB floppy disk drive when creating a SATA RAID driver disk.
• Windows ® XP may not recognize the USB floppy disk drive due to
Windows ® XP limitation. To work around this OS limitation, refer to section
4.5.4 Using a USB floppy disk drive .
4.5.1.
Creating.a.RAID.driver.disk.without.entering.the.OS
To create a RAID driver disk without entering the OS
1. Boot your computer.
2. Press <Del> during POST to enter the BIOS setup utility.
3. Set the optical drive as the primary boot device.
4. Insert the support DVD into the optical drive.
5. Save changes and exit BIOS.
6. When the Make.Disk
menu appears, press <1> to create a RAID driver disk.
7. Insert a formatted floppy disk into the USB floppy disk drive, then press
<Enter>.
8. Follow the succeeding screen instructions to complete the process.
4.5.2.
Creating.a.RAID.driver.disk.in.Windows
®
To create a RAID driver disk in Windows ® :
1. Start Windows ® .
2. Plug the USB floppy disk drive and insert a floppy disk.
3. Place the motherboard support DVD into the optical drive.
4. Go to the Make.Disk
menu, and then click AMD.AHCI/RAID.32/64bit.xxxx.
Driver to create a RAID driver disk.
5. Select USB floppy disk drive as the destination disk.
6. Follow the succeeding screen instructions to complete the process.
Write-protect the floppy disk to avoid a computer virus infection.
ROG Crosshair V Formula 4-43
4-44
4.5.3.
.Installing.the.RAID.driver.during.Windows
®
.OS.
installation
If you use a SATA optical drive to run the OS installation disk, we strongly recommend that you install the optical dirve to the SATA connectors 5/6 and set them to [IDE] mode.
To install the RAID driver for Windows ® XP
1. During the OS installation, the system prompts you to press the F6 key to install third-party SCSI or RAID driver.
2. Press <F6>, and then insert the floppy disk with RAID driver into the USB floppy disk drive.
3. When prompted to select the SCSI adapter to install, select the RAID driver for the corresponding OS version.
4. Follow the succeeding screen instructions to complete the installation.
To install the RAID driver for Windows ® Vista or later OS
1. During the OS installation, click L oad.Driver
to allow you to select the installation media containing the RAID driver.
2. Insert the USB flash drive with RAID driver into the USB port or the support
DVD into the optical drive, and then click Browse .
3. Click the name of the device you’ve inserted, go to Drivers > RAID , and then select the RAID driver for the corresponding OS version. Click OK .
4. Follow the succeeding screen instructions to complete the installation.
you have to use another computer to copy the RAID driver from the support DVD to the USB flash drive.
Chapter 4: Software support
4.5.4 Using a USB floppy disk drive
Due to OS limitation, Windows ® XP may not recognize the USB floppy disk drive when you install the RAID driver from a floppy disk during the OS installation.
To solve this issue, add the USB floppy disk drive’s Vendor ID (VID) and Product
ID (PID) to the floppy disk containing the RAID driver. Refer to the steps below:
1. Using another computer, plug the USB floppy disk drive, and insert the floppy disk containing the RAID driver.
2. Right-click My.Computer
on the Windows ® desktop or start menu, and then select Manage from the pop-up window.
or
3. Select Device.Manager
.
From the Universal.Serial.Bus.
controllers , right-click xxxxxx.USB.
Floppy , and then select Properties from the pop-up window.
The name of the USB floppy disk drive varies with different vendors.
4. Click Details tab. The Vendor ID
(VID) and Product ID (PID) are displayed.
5. Browse the contents of the
RAID driver disk to locate the file txtsetup.oem
.
6. Double-click the file. A window appears, allowing you to select the program for opening the oem file.
ROG Crosshair V Formula 4-45
7. Use Notepad to open the file.
4-46
8. Find the [HardwareIds.SCSI.Napa_i386_ahci8086] and
[HardwareIds.SCSI.Napa_amd64_ahci] sections in the txtsetup.oem
file.
9. Type the following line to the bottom of the two sections: id.=.“USB\VID_xxxx&PID_xxxx”,.“usbstor”
[HardwareIds.SCSI.Napa_i386_ahci8086] id= “PCI\VEN_1002&DEV_4392&CC_0104”,”ahcix86” id= “PCI\VEN_1002&DEV_4391&CC_0106”,”ahcix86” id= “PCI\VEN_1002&DEV_4393&CC_0104”,”ahcix86” id= “USB\VID_03EE&PID_6901”, “usbstor”
[HardwareIds.SCSI.Napa_amd64_ahci] id= “PCI\VEN_1002&DEV_4392&CC_0104”,”ahcix64” id= “PCI\VEN_1002&DEV_4391&CC_0106”,”ahcix64” id= “PCI\VEN_1002&DEV_4393&CC_0104”,”ahcix64” id= “USB\VID_03EE&PID_6901”, “usbstor”
Chapter 4: Software support
This chapter describes how to install and configure multiple ATI ® CrossFireX™ and
NVIDIA ® SLI™ graphics cards.
5
technology support
Chapter summary
5
ATI ® .CrossFireX™.technology..................................................... 5-1
5.2.
NVIDIA ® .SLI™.technology............................................................ 5-5
ROG Crosshair V Formula
5.1 ATI
®
CrossFireX™ technology
The motherboard supports the ATI procedures in this section.
® CrossFireX™ technology that allows you to install multi-graphics processing units (GPU) graphics cards. Follow the installation
5.1.1.
Requirements
• You should have two identical CrossFireX-ready graphics cards or one
CrossFireX-ready dual-GPU graphics card that are ATI ® certified.
• Ensure that your graphics card driver supports the ATI CrossFireX technology.
Download the latest driver from the AMD website at www.amd.com.
• Ensure that your power supply unit (PSU) can provide at least the minimum power required by your system.
• We recommend that you install additional chassis fans for better thermal environment.
• Visit the ATI Game website at http://game.amd.com for the latest certified graphics card and the supported 3D application list.
5.1.2.
Before.you.begin
For ATI CrossFireX to work properly, you have to uninstall all existing graphics card drivers before installing ATI CrossFireX graphics cards to your system.
To uninstall existing graphics card drivers
1. Close all current applications.
2. For Windows XP, go to Control.Panel.>.Add/Remove.Programs
.
For Windows Vista, go to Control.Panel.>.Programs.and.Features
.
For Windows 7, go to Control.Panel.>.Programs.>.Uninstall.a.program
.
3. Select your current graphics card driver/s.
4. For Windows XP, select Add/Remove .
For Windows Vista and 7, select Uninstall .
5. Turn off your computer.
ROG Crosshair V Formula 5-1
5.1.3.
Installing.CrossFireX.graphics.cards
The following pictures are for reference only. The graphics cards and the motherboard layout may vary with models, but the installation steps remain the same.
1. Prepare two CrossFireX-ready graphics cards.
2. Insert the two graphics card into the
PCIEX16 slots.
3. Ensure that the cards are properly seated on the slots.
4. Align and firmly insert the
CrossFireX bridge connector to the goldfingers on each graphics card.
Ensure that the connector is firmly in place.
5-2
Goldfingers
CrossFireX.bridge
5. Connect two independent auxiliary power sources from the power supply to the two graphics cards separately.
6. Connect a VGA or a DVI cable to the graphics card.
Chapter 5: Multiple GPU technology support
5.1.4.
Installing.the.device.drivers
Refer to the documentation that came with your graphics card package to install the device drivers.
Ensure that your PCI Express graphics card driver supports the ATI
(www.amd.com).
®
CrossFireX™ technology. Download the latest driver from the AMD website
5.1.5.
Enabling.the.ATI
®
.CrossFireX™.technology
After installing your graphics cards and the device drivers, enable the CrossFireX™ feature through the ATI Catalyst™ Control Center in Windows environment.
Launching.the.ATI.Catalyst.Control.Center
To launch the ATI Catalyst Control Center
1. Right-click on the Windows ® desktop and select Catalyst(TM).Control.Center
.
You can also right-click the ATI icon in the Windows notification area and select
Cayalist.Control.Center
.
2. The Catalyst.Control.Center.Setup.
Assistant appears when the system detects the existance of multigraphics cards. Click Go to continue to the Catalyst.Control.Center.
Advanced.View.
window.
ROG Crosshair V Formula 5-3
Enabling.CrossFireX.settings
1. In the Catalyst Control Center window, click Graphics.Settings.>.
CrossFireX > Configure .
2. From the Graphics Adapter list, select the graphics card to act as the display GPU.
3. Select Enable.CrossFireX
.
4. Click Apply , and then click OK to exit the window.
1
4
3
2
5-4 Chapter 5: Multiple GPU technology support
5.2 NVIDIA
®
SLI™ technology
The motherboard supports the NVIDIA ® SLI™ (Scalable Link Interface) technology that allows you to install multi-graphics processing units (GPU) graphics cards.
Follow the installation procedures in this section.
5.2.1.
Requirements
• In SLI mode, you should have two identical SLI-ready graphics cards that are
NVIDIA ® certified.
• Ensure that your graphics card driver supports the NVIDIA SLI technology.
Download the latest driver from the NVIDIA website (www.nvidia.com).
• Ensure that your power supply unit (PSU) can provide at least the minimum power required by your system.
• We recommend that you install additional chassis fans for better thermal environment.
• Visit the NVIDIA zone website (http://www.nzone.com) for the latest certified graphics card and supported 3D application list.
5.2.2.
Installing.two.SLI-ready.graphics.cards
The following pictures are for reference only. The graphics cards and the motherboard layout may vary with models, but the installation steps remain the same.
1. Prepare two SLI-ready graphics cards.
2. Insert the two graphics card into the
PCIEX16 slots. If your motherboard has more than two PCIEX16 slots, refer to Chapter 2 in this user manual for the locations of the
PCIEX16 slots recommended for multi-graphics card installation.
3. Ensure that the cards are properly seated on the slots.
ROG Crosshair V Formula 5-5
4. Align and firmly insert the SLI bridge connector to the goldfingers on each graphics card. Ensure that the connector is firmly in place.
5. Connect two independent auxiliary power sources from the power supply to the two graphics cards separately.
6. Connect a VGA or a DVI cable to the graphics card.
SLI.bridge
Goldfingers
5-6
5.2.3.
Installing.the.device.drivers
Refer to the documentation that came with your graphics card package to install the device drivers.
Ensure that your PCI Express graphics card driver supports the NVIDIA com).
® SLI™ technology. Download the latest driver from the NVIDIA website (www.nvidia.
5.2.4.
Enabling.the.NVIDIA
®
.SLI™.technology
After installing your graphics cards and the device drivers, enable the SLI feature in NVIDIA ® Control Panel under the Windows ® operating system.
Launching.the.NVIDIA.Control.Panel
You can launch the NVIDIA Control Panel by the following two methods.
A. Right click on the empty space of the Windows ® desktop and select NVIDIA.Control.Panel
.
The NVIDIA Control Panel window appears (See
Step B5).
Chapter 5: Multiple GPU technology support
B1. If you cannot see the NVIDIA Control Panel item in step (A), select Personalize .
B2. From the Personalization window, select Display.Settings
.
B3. From the Display Settings dialog box, click Advanced.Settings
.
ROG Crosshair V Formula 5-7
B4. Select the NVIDIA GeForce tab, and then click Start.the.NVIDIA.Control.
Panel .
B5. The NVIDIA Control Panel window appears.
5-8
Enabling.SLI.settings
From the NVIDIA Control Panel window, select Set SLI Configuration . Click
Enable.SLI
and set the display for viewing SLI rendered content. When done, click Apply .
Chapter 5: Multiple GPU technology support
ASUS contact information
ASUSTeK.COMPUTER.INC.
Address
Telephone
Fax
Web site
15 Li-Te Road, Peitou, Taipei, Taiwan 11259
+886-2-2894-3447
+886-2-2890-7798 [email protected]
www.asus.com.tw
Technical.Support
Telephone
Online support
+86-21-38429911 support.asus.com
ASUS.COMPUTER.INTERNATIONAL.(America)
Address
Telephone
Fax
Web site
800 Corporate Way, Fremont, CA 94539, USA
+1-812-282-3777
+1-510-608-4555 usa.asus.com
Technical.Support
Telephone
Support fax
Online support
+1-812-282-2787
+1-812-284-0883 support.asus.com
ASUS.COMPUTER.GmbH.(Germany.and.Austria)
Address
Fax
Web site
Online contact
Harkort Str. 21-23, D-40880 Ratingen, Germany
+49-2102-959911 www.asus.de
www.asus.de/sales
Technical.Support
Telephone
Support Fax
Online support
+49-1805-010923*
+49-2102-9599-11 support.asus.com
* EUR 0.14/minute from a German fixed landline; EUR 0.42/minute from a mobile phone.
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Key Features
- AMD Socket AM3 AMD Phenom II X2
- PC ATX AMD 990FX 7.1 channels
- 4 ECC Non-ECC Maximum internal memory: 32 GB
- 3-Way SLI, Quad-GPU CrossFireX
- BIOS type: EFI 32 Mbit ACPI version: 2.0a