QRG_060124 1/24/06 6:38 PM Page 1
Quick Reference Guide
PMD-B100
■
In the Box
Power Button– Press and hold for 2 seconds to power on the unit.
SD/MMC Card Slot Headphone Jack
Battery Charging
Status Indicator
Cradle Connector
Volume
Control
Cradle with Cigarette
Lighter Charger
AC Adapter
Remote Sensor and Ambient
Light Sensor
Map Zoom In
Main Menu
Music
Destination
Map Zoom Out
Current
Vehicle
Position Icon
USB Cable
Wiping Cloth
Carrying Case
1200mAh Battery
External GPS
Antenna Connector
Mini USB
Connector
Owner’s Manual
Quick Reference
Guide
■
Installing the Battery
Before using Blackbird, install the included rechargeable battery. It is recommended that the battery be charged using the supplied AC adapter for 8 hours before using the system.
WARNING
Always turn off power to the system before installing or removing the battery. Failure to do so will result in damage to your system.
1 Place Blackbird face down on a flat surface.
2 Press the battery door and pull away from the main unit body.
3 Attach the battery to the battery door will be a click sound-heard.
4 Insert and slide the battery assembly back into the main unit until a click sound is heard.
Note: Avoid removing this battery from the main unit. If the battery needs to be replaced, dispose of it in accordance with local hazardous material requirements.
■
How to Mount Blackbird
1 Find a spot suitable for the navigation system.
Ensure that both the suction cup and windshield area are clean and free of dirt and grease before attaching it.
Stick the suction cup mount against the windshield. Turn the knob to activate the vacuum to lock the position.
5
CAUTION
Remove the navigation system when you are away from the vehicle to prevent theft.
4
5 Slide the navigation system into the cradle until you hear a click sound.
6 Plug the cigarette lighter charger into the cigarette lighter socket.
3
2
2 Turn the knob counterclockwise to adjust up/down position. Then turn clockwise to set the position.
3 Turn the knob clockwise to adjust right/left position.
Then turn counter clockwise to set the position.
4
DEVICE SHOULD NOT BE INSTALLED SO THAT
IT OBSTRUCTS THE DRIVER’S VIEW.
Open the antenna before inserting the navigation system into the cradle. For best reception sensitivity, position the antenna 90 degrees to the main unit.
■
To Remove the Navigation System from the Cradle
1 Press and hold the eject button on the cradle.
2 Grasp the navigation system behind the antenna and remove by sliding up and out of the cradle.
WARNING
Improper installation may make the navigation system fall out from the cradle while driving. Please make sure all locks and knobs are turned tight.
Do not install the navigation while driving.
Note to California consumers: California Vehicle
Code 26708 prohibits the placement of any object on windows. Refer to your authorized Alpine dealer for other installation options.
QRG_060124 1/24/06 6:38 PM Page 2
■
Map Functions
Below is an overview of different buttons and icons on the map display. For more detailed information about this screen, please see the owner’s manual.
Next Street
Name
Next Maneuver
Arrow
Distance to next maneuver
Distance to
Destination
Map
Orientation
Voice Prompt Repeat Button –
Repeats the last voice prompt command.
Return Key back one screen.
– Cancels
Current Street Name
Main Menu – press this icon to access the main menu
Battery Status Indicator
GPS Status bar
Map Scale Bar
Current Vehicle Position – press this icon to return to the map from any screen. Also switches between
MAP and ARROW screens.
■
Main Menu
From the Map or any screen, touch the Main Menu to access the following menus:
Destination
Set and save destinations using any of six different input methods.
Home
Easily get back to a predetermined home location from anywhere you’re located.
Information
Contains system information as well as a navigation demonstration function.
Traffic
The traffic button is a feature coming soon that will allow you to take advantage of the built-in traffic information receiver. Optional subscription service required.
■
Go to a Destination
The following example briefly describes how to input a distination in the Blackbird Portable Navigation System.
■
Play Music
Entertainment
Select and play MP3 music stored on your SD or MMC card.
Route
Allows you to view manuever lists, re-route or take a detour route, changing routing methods, or stop turnby-turn guidance.
Edit
Edit Home destination,
Address Book, and
Previous Destinations.
Setup
Allows you to customize various characteristics of your navigation system’s look and feel.
Displays Song
Titles and Artist
Names
1
Select Destination from
Main Menu .
Or press Destination button.
2 Select desired method.
( Places and By Places Type is selected.)
3 Scroll the list.
Select desired place type.
(In this example, AMUSE-
MENT PARKS is selected.)
4 Select the search method.
(In this example, Sort by
Name is selected.)
5 Start typing in the first few letters of the name of the place. After a while a match may appear. Select it.
6 Select OK to Proceed to set the destination.
Map is displayed.
Follow the navigation.
Folder Number
File Number
Back Play/
Pause
Forward Folder
Up
3
4
1
2
Go to Main Menu ➔ Entertainment .
Select a folder by using Folder Search .
Select a song by using Back or Forward .
Touch Play .
Folder
Down
Folder
Search
Playing Time
