Electrolux EHS68200P User Manual
Oglas
Oglas
user manual istruzioni per l'uso brugsanvisning
Ceramic glass hob
Piano di cottura in vetroceramica
Glaskeramiskkogezone
EHS68200P
We were thinking of you when we made this product
Welcome to the world of Electrolux
Thank you for choosing a first class product from Electrolux, which hopefully will provide you with lots of pleasure in the future. The Electrolux ambition is to offer a wide variety of quality products that make your life more comfortable.
You will find some examples on the cover in this manual. Please take a few minutes to study this manual so that you can take advantage of the benefits of your new machine. We promise that it will provide a superior User Experience delivering Ease-of-Mind. Good luck!
electrolux 3
4 electrolux
Contents
Safety instructions
Description of the Appliance
Operating the appliance
Tips on Cooking and Frying
Cleaning and Care
What to do if …
10
19
5
7
22
24
Disposal
Installation Instructions
Service
Assembly
Rating Plate
26
27
28
89
92
The following symbols are used in this user manual:
1
Important information concerning your personal safety and information on how to avoid damaging the appliance.
3
General information and tips
2
Environmental information
safety instructions electrolux 5
Safety instructions
Please comply with these instructions. If you do not, any damage resulting is not covered by the warranty.
5
This appliance conforms with the following EU Directives:
– 73/23/EEC dated 19.02.1973 Low
Voltage Directive
– 89/336/EEC dated 03.05.1989 EMC
Directive inclusive of Amending Directive 92/31/EEC
– 93/68/EEC dated 22.07.1993 CE
Marking Directive
Correct use
• This appliance should be used only for normal domestic cooking and frying of food.
• The appliance must not be used as a work surface or as a storage surface.
• Additions or modifications to the appliance are not permitted.
• Do not place or store flammable liquids, highly inflammable materials or fusible objects (e.g. plastic film, plastic, aluminium) on or near the appliance.
Children’s safety
• Small children must be kept away from the appliance.
• Only let bigger children work on the appliance under supervision.
• To avoid small children and pets unintentionally switching the appliance on, we recommend activation of the child safety device.
General safety
• The appliance may only be installed and connected by trained, registered service engineers.
• Built-in appliances may only be used after they have built in to suitable built-in units and work surfaces that meet standards.
• In the event of faults with the appliance or damage to the glass ceramic
(cracks, scratches or splits), the appliance must be switched off and disconnected from the electrical supply, to prevent the possibility of an electric shock.
• Repairs to the appliance must only be carried out by trained registered service engineers.
Safety during use
• Overheated fats and oils can ignite very quickly. When cooking with fat or oil (e.g. chips) do not leave the appliance unattended.
• There is the risk of burns from the appliance if used carelessly.
• Remove stickers and film from the glass ceramic.
• Cables from electrical appliances must not touch the hot surface of the appliance or hot cookware.
• Switch the cooking zones off after each use.
Safety when cleaning
• For cleaning, the appliance must be switched off and cooled down.
• For safety reasons, the cleaning of the appliance with steam jet or highpressure cleaning equipment is not permitted.
6 electrolux safety instructions
How to avoid damage to the appliance
• The glass ceramic can be damaged by objects falling onto it.
• The edge of the glass ceramic can be damaged by being knocked by the cookware.
• Cookware made of cast iron, cast aluminium or with damaged bottoms can scratch the glass ceramic if pushed across the surface.
• Objects that melt and things that boil over can burn onto the glass ceramic and should be removed straightaway.
• To avoid damaging cookware and glass ceramics, do not allow saucepans or frying pans to boil dry.
• Do not use the cooking zones with empty cookware or without cookware.
description of the appliance electrolux 7
Description of the Appliance
Cooking surface layout
Single cooking zone
1200 W
Multi-purpose zone
1400/2200
W
Control panel Control panel
Control panel layout
Cooking zone indicators
Timer function
Timer
Timer display
Display
Outside/middle ring
On/Off
Triple ring pilot light
Triple cooking zone
800/1600/2300 W
Single cooking zone
1800 W
Lock with pilot light
On/Off with power indicator
Multi-purpose zone pilot
Outside ring
On/Off
Heat setting selection
8 electrolux description of the appliance
Touch Control sensor fields
The appliance is operated using Touch
Control sensor fields. Functions are controlled by touching sensor fields and confirmed by displays and acoustic signals.
Touch the sensor fields from above, without covering other sensor fields.
Sensor field
On / Off
Increase settings
Decrease settings
Function
To switch the appliance on and off
Increasing heat setting/time
Decreasing heat setting/time
Timer
Lock
Timer selection
Locking/unlocking the control panel
Triple ring switch To switch outer rings on and off
Multi-purpose zone switch To switch the outside ring on and off
description of the appliance electrolux 9
Displays
-
Display
Keep warm setting
Heat settings
Description
Cooking zone is switched off
Keep warm setting is set
Heat setting is set
Automatic warm up function Automatic warm-up function is activated
Fault Malfunction has occurred
Residual heat
Child safety device
Safety cut-out
Residual heat indicator
Cooking zone is still hot
Lock/child safety device is engaged
Safety cut-out has been activated
Warning! Risk of burns from residual heat. After being switched off, the cooking zones need some time to cool down. Look at the residual heat indicator .
Residual heat can be used for melting and keeping food warm.
10 electrolux operating the appliance
Operating the appliance
Switching the appliance on and off
Switch on
Switch off
Control panel
Touch for 2 seconds
Touch for 1 second
Display
/
/ none
Pilot light lights up goes out
After switching on, within approx.
10 seconds a heat setting or a function must be set, otherwise the appliance automatically switches itself off.
Setting the heat setting
To increase
To decrease
To switch off
Control panel
Touch
Touch
Touch and at the same time
The keep warm setting lies between and . It is used to keep food warm.
Indicator
to
to
operating the appliance electrolux 11
Switching the outside ring on and off
By switching the outside rings on or off, the effective heating surface can be matched to the size of the cookware.
Before an outside ring can be switched on, the inside ring must be switched on.
Triple cooking zone
To switch on middle ring
To switch on outside ring
To switch off outside ring
To switch off middle ring
Sensor panel Power indicator
Touch for 1-2 seconds
.
One power indicator is lit.
Touch for 1-2 seconds
.
Two power indicators are lit.
Touch for 1-2 seconds
.
Second power indicator goes out.
Touch for 1-2 seconds
.
First power indicator goes out.
Roasting zone
To switch on outside ring
Sensor panel
Touch for 1-2 seconds
Power indicator is lit
To switch off outside ring
Switch on
Switch off seconds
Locking/unlocking the control panel
The control panel, with the exception of the “On/Off” sensor field, can be locked at any time in order to prevent the settings being changed e.g. by wiping over the panel with a cloth.
Control panel
Touch
Touch goes out
Display
(for 5 seconds) previously set heat setting
When you switch the appliance off, the locking function is automatically switched off.
12 electrolux operating the appliance
Using the automatic warm-up function
All cooking zones are equpped with an automatic warm up function When setting a heat setting using , when starting from , the cooking zone switches to full power for a certain amount of time and then automatically switches back to the heat setting set.
Switch on
(only when starting at
)
Switch off
Not used
Control panel
Touch
Touch
Touch possible heat settings
Display
to (after 5 seconds)
to /
to
to
to
If during the automatic warm up a higher heat setting is selected, e.g. from to , the automatic warm up is adjusted.
If there is still residual heat on the cooking zone (display ), the automatic warm up is not performed.
operating the appliance electrolux 13
The length of time that the automatic warm up function operates depends on the heat setting selected.
Heat setting v
7
8
9
3
4
5
6
1
2
Length of the automatic warm up [min:sec]
0:30
1:00
1:40
4:50
6:30
10:10
2:00
3:30
4:30
---
14 electrolux operating the appliance
Using the child safety device
The child safety device prevents unintentional use of the appliance.
Setting the child safety device
1.
Step Control panel
Switch on the appliance
(Do not set a heat setting)
Touch until the signal sounds
Display/Signal
2.
3.
Touch
Appliance switches off. The child safety device is engaged.
Acoustic signal
Overriding the child safety device
The child safety device can be released in this way for a single cooking session; it remains activated afterwards.
1.
2.
Step Control panel
Switch on the appliance
Touch and at the same time
Display/Signal
/ acoustic signal
Until the appliance is next switched off, it can used as normal.
After overriding the child safety device, a heat setting or a function must be set within approx. 10 seconds, otherwise the appliance automatically switches itself off.
operating the appliance electrolux 15
Releasing the child safety device
1.
2.
Step Control panel
Switch on the appliance
Touch until the signal sounds
Display/Signal
Acoustic signal
3.
Touch
Appliance switches off. The child safety device is released.
Using the timer
Function
Automatic cut-out
Countdown timer
Condition a heat setting is set cooking zones not in use
Outcome after the time has elapsed acoustic signal
00 flashes
Cooking zone switches off acoustic signal
00 flashes
If a heat setting is set on this cooking zone in addition to a countdown timer, the cooking zone is switched off after the time set has elapsed.
If a cooking zone is switched off, the timer function set is also switched off.
16 electrolux operating the appliance
Selecting a cooking zone
Control panel
1.
Step
2.
3.
4.
Display
Pilot light of the first cooking zone flashes
Pilot light of the second cooking zone flashes
Pilot light of the third cooking zone flashes
Pilot light of the fourth cooking zone flashes
If the pilot light is flashing more slowly, the heat setting can be set or modified.
If other timer functions are set, after a few seconds the shortest remaining time of all the timer functions is displayed and the corresponding pilot light flashes.
Setting the time
Step
1.
Control panel Indicator
Select cooking zone Pilot light for the cooking zone selected flashes
00 to 99 minutes 2.
After a few seconds the pilot light flashes more slowly.
The time is set.
The time counts down.
operating the appliance electrolux 17
Switching off the timer function
Step
1.
Control panel Indicator
Select cooking zone Pilot light of cooking zone selected flashes faster
Time remaining is displayed
2.
Touch The time remaining counts backwards to 00.
The pilot light goes out.
The Timer function for the selected cooking zone is switched off.
Changing the time
Step
1.
2.
Control panel Indicator
Select cooking zone Pilot light of the selected cooking zone flashes faster
Time remaining is displayed or 01 to 99 minutes
After a few seconds, the pilot light flashes more slowly.
The time is set.
The time counts down.
Displaying the time remaining for a cooking zone
Step
1.
Control panel field Display
Select cooking zone Pilot light of the cooking zone selected flashes faster
The time remaining is displayed
After a few seconds the pilot light flashes more slowly.
Switching off the acoustic signal
Step
1.
Control panel field
Touch
Acoustic signal stops.
Acoustic signal
Acoustic signal to acknowledge.
18 electrolux operating the appliance
Safety cut-out
Cooking surface
• If after switching on the cooking surface, a heat setting is not set for a cooking zone within approx. 10 seconds, the cooking surface automatically switches itself off.
• If one or more sensor fields are covered by objects (a pan, cloths, etc.) for longer than approx. 10 seconds, a signal sounds and the cooking surface switches off automatically.
• If all cooking zones are switched off, the cooking surface automatically switches itself off after approx. 10 seconds.
Control panel
• When the appliance is switched off, if one or more of the sensor fields on the control panel are covered for more that 10 seconds, an acoustic signal sounds. The acoustic signal switches itself off automatically when the sensor fields are no longer covered.
Cooking zones
• If one of the cooking zones is not switched off after a certain time, or if the heat setting is not modified, the relevant cooking zone switches off automatically. is displayed. Before being used again, the cooking zone must be set to 0.
Heat setting v, 1 - 2
3 - 4
5
6 - 9
Switches off after
6 hours
5 hours
4 hours
1.5 hours
Tips on Cooking and Frying
tips on cooking and frying electrolux 19
Information on acrylamides
According to the latest scientific knowledge, intensive browning of food, especially in products containing starch, can constitute a health risk due to acrylamides.
Therefore we recommend cooking at the lowest possible temperatures and not browning foods too much.
Cookware
• You can recognise good cookware from the bottoms of the pans. The bottom should be as thick and flat as possible.
• Cookware made of enamelled steel or with aluminium or copper bottoms can leave discolorations on the glass ceramic surface which are difficult or impossible to remove.
20 electrolux tips on cooking and frying
Energy saving
Always place cookware on the cooking zone before it is switched on.
If possible, always place lids on the pans.
Switch cooking zones off before the end of the cooking time, to take advantage of residual heat.
Bottom of pans and cooking zones should be the same size.
tips on cooking and frying electrolux 21
Examples of cooking applications
The information given in the following table is for guidance only.
Heat setting
Cookingprocess
0
V
1-2
2-3
3-4
4-5
6-7
7-8
9 suitable for
Cooking time
Tips/Hints
Residual heat, Off position
Keeping food warm
Keeping cooked foods warm as required Cover
Melting
Hollandaise sauce, melting butter, chocolate, gelatine
5-25 mins.
Stir occasionally
Solidifying
Boiling
Searing
Deep frying
Fluffy omelettes, baked eggs 10-40 mins.
Cook with lid on
Simmering on low heat
Steaming
Braising
Boiling
Gentle
Frying
Heavy
Frying
Simmering rice and milkbased dishes
Heating up ready-cooked meals
Steaming vegetables, fish braising meat
Steaming potatoes
25-50 mins.
20-45 mins.
20-60 mins.
Add at least twice as much liquid as rice, stir milk dishes part way through cooking
With vegetables add only a little liquid (a few tablespoons)
Use only a little liquid, e. g.: max.
¼ l water for
750 g potatoes
Cooking larger quantities of food, stews and soups
Frying escalopes, veal cordon bleu, cutlets, rissoles, sausages, liver, roux, eggs, pancakes, doughnuts
Hash browns, loin steaks, steaks, Flädle (pancakes for garnishing soup)
60-150 mins.
Up to 3 l liquid plus ingredients
Steady frying
5-15 mins.
per pan
Turn halfway through cooking
Turn halfway through cooking
Boiling large quantities of water, cooking pasta, searing meat (goulash, pot roast), deep frying chips
22 electrolux cleaning and care
Cleaning and Care
Take care! Risk of burns from residual heat.
Warning! Sharp objects and abrasive cleaning materials will damage the appliance. Clean with water and washing up liquid.
Warning! Residues from cleaning agents will damage the appliance.
Remove residues with water and washing up liquid.
Cleaning the appliance after each use
1.
Wipe the appliance with a damp cloth and a little washing up liquid.
2.
Rub the appliance dry using a clean cloth.
cleaning and care electrolux 23
Removing deposits
1.
Place a scraper on the glass ceramic surface at an angle.
2.
Remove residues by sliding the blade over the surface.
3.
Wipe the appliance with a damp cloth and a little washing up liquid.
4.
Rub the appliance dry using a clean cloth.
Remove
Type of dirt immediately sugar, food containing sugar plastics, tin foil limescale and water rings fat splashes yes yes
---
--shiny metallic discolouration ---
*Scrapers and cleaners for glass ceramic and stainless steel can be purchased in specialist shops when the appliance has cooled down
---
--yes yes yes using a scraper* cleaner for glass ceramic or stainless steel*
Remove stubborn residues with a cleaner for glass ceramic or stainless steel.
Scratches or dark stains on the glass ceramic that cannot be removed do not however affect the functioning of the appliance.
24 electrolux what to do if …
What to do if
…
Problem Possible cause Remedy
The cooking zones will not switch on or are not functioning
Acoustic signal sounds when appliance is switched off
The residual heat indicator is not displaying anything
More than 10 seconds have passed since the appliance was switched on
The child safety device is switched on
Switch the appliance on again.
Deactivate the child safety device (See the section “Child safety device”)
Only touch one sensor field Several sensor fields were touched at the same time
Safety cut-out has been triggered
Remove any objects (pan, cloths, etc.) that are lying on the control panel. Switch the appliance on again
The lock is switched on Switch off the lock (See the section “Locking/unlocking the control panel”)
The control panel is wholly or partly covered by objects.
Remove objects.
The cooking zone was only on for a short time and is therefore not hot
If the cooking zone is supposed to be hot, call the Customer Service Department.
The automatic warm up function is not switching itself on
There is still residual heat on the cooking zone
The highest heat setting is set
Let the cooking zone cool down
The highest heat setting has the same power as the automatic warm up function
Acoustic signal sounds and appliance switches itself on and then off again; after 5 seconds another acoustic signal sounds
The heat setting was set using the sensor field
1.
Switching off the cooking zone
1.
Set the cooking zone using the sensor field
The On/Off sensor field has been covered up, e.g. by a cloth
Do not place any objects on the control panel
is lit Overheating protection for the cooking zone has been triggered
Switch off the cooking zone.
Switch the cooking zone on again
Safety cut-out has been triggered
Switch off the cooking zone.
Switch the cooking zone on again
what to do if … electrolux 25
Problem Possible cause Remedy
and number are displayed Electronics fault Disconnect the appliance from the electrical supply for a few minutes (Take the fuse out of the house’s wiring system)
If after switching on again, is displayed again, call the customer service department
and minus are displayed Light rays that are too strong on the control panel, for example bright sunlight
Briefly shade the control panel, for example with the hand
Acoustic signal sounds, appliance switches itself off Switch appliance on (again)
If you are unable to remedy the problem by following the above suggestions, please contact your dealer or the Customer Care Department.
Warning! Repairs to the appliance are only to be carried out by qualified service engineers. Considerable danger to the user may result from improper repairs.
If the appliance has been wrongly operated, the visit from the customer service technician or dealer may not take place free of charge, even during the warranty period.
26 electrolux disposal
Disposal
Packaging material
The packaging materials are environmentally friendly and can be recycled. The plastic components are identified by markings, e.g. >PE<,
>PS<, etc. Please dispose of the packaging materials in the appropriate container at the community waste disposal facilities.
Old appliance
The symbol
W
on the product or on its packaging indicates that this product may not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment.
By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about recycling of this product, please contact your local city office, your household waste disposal service or the shop where you purchased the product.
installation instructions electrolux 27
Installation Instructions
Safety instructions
The laws, ordinances, directives and standards in force in the country of use are to be followed (safety regulations, proper recycling in accordance with the regulations, etc.)
Installation may only be carried out by a qualified electrician.
The minimum distances to other appliances and units are to be observed.
Anti-shock protection must be provided by the installation, for example drawers may only be installed with a protective floor directly underneath the appliance.
The cut surfaces of the worktop are to be protected against moisture using a suitable sealant.
The sealant seals the appliance to the work top with no gap.
Avoid installing the appliance next to doors and under windows. Otherwise hot cookware may be knocked off the rings when doors and windows are opened.
WARNING!
Risk of injury from electrical current.
• The electrical mains terminal is live.
• Make electrical mains terminal free of voltage.
• Observe connection schematic.
• Observe electrical safety rules.
• Ensure anti-shock protection through correct installation by a qualified electrician.
• The appliance must be connected to the electrical supply by a qualified electrician.
IMPORTANT!
Risk of injury from electrical current.
Loose and inappropriate plug and socket connections can make the terminal overheat.
• Have the clamping joints correctly installed by a qualified electrician.
• Use strain relief clamp on cable.
• In the event of single-phase or twophase connection, the appropriate mains cable of type H05BB-F Tmax
90°C(or higher) must be used.
• If this appliance’s mains cable is damaged, it must be replaced by a special cable (type H05BB-F Tmax
90°C; or higher). The latter is available from the Customer Care Department.
A device must be provided in the electrical installation which allows the appliance to be disconnected from the mains at all poles with a contact opening width of at least 3 mm.
Suitable isolation devices include line protecting cut-outs, fuses (screw type fuses are to be removed from the holder), earth leakage trips and contactors.
Sticking on the seal
• Clean the worktop around the cutout area.
• Stick the single-sided adhesive sealing tape provided on the underside of the hob around the outside edge ensuring that it is not stretched. The two ends of the tape should join in the middle of one side. After trimming the tape (allow it to overlap by
2-3 mm), press the two ends together.
28 electrolux service
Service
In the event of technical faults, please first check whether you can remedy the problem yourself with the help of the operating instructions (section “What to do if…”).
If you were not able to remedy the problem yourself, please contact the Customer Care Department or one of our service partners.
In order to be able to assist you quickly, we require the following information:
– Model description
– Product number (PNC)
– Serial number (S No.)
(for numbers see rating plate)
– Type of fault
– Any error messages displayed by the appliance
– three digit letter-number combination for glass ceramic
So that you have the necessary reference numbers from your appliance at hand, we recommend that you write them in here:
Model description: ..........................
...........
PNC: ..........................
...........
S No: ..........................
...........
Assembly / Montaggio /
Montering
assembly / montaggio / montering electrolux 89
90 electrolux
electrolux 91
92 electrolux
Rating Plate / Targhetta di omologazione / Typeskilt
EHS68200P
55HDD70AO 230 V 50 Hz
ELECTROLUX
949 592 655
7,5 kW
electrolux 93
94 electrolux
www.electrolux.com
www.electrolux.co.uk
www.electrolux.it
www.electrolux.dk
822 930 565-A-180906-01
Prenesi
Javna povezava posodobljena
Javna povezava do vašega klepeta je bila posodobljena. You may view and manage your chat links after registration here.
Javna povezava do dokumenta
Oglas