Mophie powerstation go AC Power Bank Operating instructions

powerstation

®

go AC

OPERATING INSTRUCTIONS

powerstation go AC

Thank you for choosing mophie!

Powerful and loaded with features including a new, easy to use digital display, the powerstation go AC can be used to safely jump start your vehicle or provide portable power for your AC appliances. The powerstation go AC can charge your laptop, phone, tablet and other electronic devices anywhere! The powerstation go AC also includes a convenient floodlight and emergency light. Compact, versatile and simple to use, the powerstation go AC and all accessories fit neatly in its carrying pouch and is perfect to store in your home or vehicle for every day use or an emergency need.

TABLE OF CONTENTS

Safety Precautions

Included Items

Operating Instructions

Troubleshooting Guide

Specifications

Warranty and Contact Information

SAFETY PRECAUTIONS

DANGER-CAUTION Read and understand all safety information before using this product. Failure to follow these instructions may result in electrical shock, explosion, fire which may result in serious injuries, death or property damage.

• When used correctly, lithium- ion rechargeable batteries provide a

safe and dependable source of portable power. However, if they are

misused or abused, this may result in leakage, burns, fire or explosion,

causing personal injury or damage to other devices.

• Misusing or incorrectly connecting your powerstation go AC may

cause electric shock to users and damage equipment.

• Do not operate in explosive atmospheres such as in the presence of

flammable liquids, gases or dust.

• Remove jump start clamps from vehicle battery after jump starting vehicle.

• Keep your powerstation go AC dry and away from moisture and

corrosive materials. The powerstation go AC should not be used near

water or wet areas such as bathtubs, showers, bathrooms, sinks,

swimming pools or basements.

• Do not expose your powerstation go AC to moisture, water, rain, or snow.

• Keep your powerstation go AC away from heat sources, including

open flames, radiators, stoves, ovens, and any other devices that

product heat.

• The lithium-ion rechargeable battery used in this charging

device may present a risk of fire or chemical burn if mistreated. Do not

expose to fire or excessive temperature. Do not expose to heat above

212°F (100°C) or incinerate.

• In the unlikely event of leakage or explosion use sand or a chemical

fire extinguisher.

• Your powerstation go AC may become warm under extended high

power operation. Do not cover, wrap, or otherwise restrict the

powerstation go AC during operation.

• Do not disassemble your powerstation go AC. There are no user-

serviceable parts inside. Incorrect reassembly may result in shock

or fire hazard.

• Do not drop or subject to strong impacts. Do not operate your

powerstation go AC if it has received a sharp blow, or has otherwise

been damaged in any way.

• Do not puncture, crush or subject to mechanical shock.

• Only charge your powerstation go AC by the specified method with

the specified charging adapter provided with the unit.

• Do not use any non-mophie-branded accessories with the

powerstation go AC. Doing so may cause electric shock to users and

damage equipment.

• The powerstation go AC, along with its accessories, are not toys and

should be kept away from children.

• Make sure the jumper cables are fully plugged into the jump start

output before trying to jumpstart your vehicle.

• Do not touch red (positive) and black (negative) jumper clamps

together at any point.

• Do not insert any foreign object into the ports or openings of your

powerstation go AC.

• Do not clean your powerstation go AC with harsh chemicals, soaps or

detergents. Just wipe the case with a soft cloth.

• Make sure the powerstation go AC’s charging ports do not become

contaminated with lint or other debris. Use a canned-air type of

product periodically to ensure that the port openings are clear.

• Batteries should be recycled or disposed of as per state and

local guidelines.

• Storage: -4°F – 158°F (-20°C – 70°C), Discharge: 14°F – 122°F

(-10°C – 50°C), Charge: 32°F – 113°F (0°C – 45°C)

3. Press the “Jump Start” button and wait for solid green light.

JUMP START TROUBLESHOOTING TIPS OPERATING INSTRUCTIONS

Charging Your powerstation go AC

To charge your powerstation go AC, use the provided Wall Charging

Adapter, and plug the DC jack into the charging put. Next, connect the wall charging adapter into a wall outlet. The powerstation go AC will automatically begin charging. When the powerstation go AC is fully charged, all five battery indicator bars will be solid white and the digital screen will indicate 100% charged. (This could take up to 9 hours).

JUMP STARTING YOUR VEHICLE WITH

THE POWERSTATION GO AC

1. Plug the jumper cables into the jump start output on the

powerstation go AC.

2. Attach the jumper cable clamps to the vehicle battery.

- Red clamp on positive terminal (+)

- Black clamp on negative terminal (-)

While charging, the digital screen will illustrate the charge percentage of the powerstation go AC. When fully charged, disconnect the cable.

NOTE:

The powerstation go AC is designed to charge between 32°F-113°F

(0-45° C). A "TEMP" indicator will be illustrated on the digital display if the powerstation go AC is attempted to be charged outside of this temperature range.

4. Start your vehicle.

5. Disconnect the jumper cable clamps from the car battery.

CHARGING AN ELECTRONIC DEVICE USING

5V/2.4A USB OUTPUT PORT

1. Connect the USB-C tip of the supplied USB-C cable into the

USB-C input of your electronic device and connect the Standard

USB end of the supplied USB-C cable into either one of the

powerstation go AC USB 5V/2.4A Output ports.

2. Turn on the USB charging by pressing the

USB Power ON/OFF Button on the powerstation go AC.

MOPHIE SMART CHARGE TECHNOLOGY

Your powerstation go AC contains the mophie SMART CHARGE

TECHNOLOGY to achieve higher compatibility for charging standard 5V

USB electronic devices. The mophie SMART CHARGE TECHNOLOGY will allow the powerstation go AC to communicate with your electronic device and provide the fastest and safest charge for that device.

COMPATIBILITY

Standard 5V USB electronic devices including: Mobile phones, Tablets,

PSP, NDS, MP3, MP4, MP5, Bluetooth, GPS, Cameras, and more.

USING YOUR POWERSTATION GO AC FLOODLIGHT

The floodlight can be turned on and off by simply pressing and releasing the floodlight ON/OFF button. The first press will turn on the floodlight. Second press will turn on the red emergency light. Third press will turn on SOS flashing red light. The floodlight will automatically turn off after 2 hours of inactivity.

SPECIFICATIONS

Battery Cells:

Battery Pack Energy:

Contains a battery with 3x Li-Polymer 5000mAh

55500 mWh

Jump Start:

Input:

12V/600Amps

14V/0.85A

USB Output:

Dimensions:

2x USB 5V/2.4A

3.82 x 7.17 x 1.5 inches

Weight: 1.66 lbs

Operating Temperature (During Charging) 32°F - 113°F (0°C - 45°C)

Operating Temperature 14°F - 122°F (-10°C - 50°C)

COMPLIANCE WITH FCC REGULATION

This device complies with part 15 of the FCC Rules and RSS-Gen of IC

Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that

to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

CAUTION: To comply with the limits of the Class B digital device, pursuant to Part 15 of the FCC Rules, this device must be used with certified peripherals and shielded cables. All peripherals must be shielded and grounded. Operation with non-certified peripherals or non-shielded cables may result in interference to radio or reception.

LIMITED WARRANTY

At mophie, we are dedicated to making the best quality products. To back this up, this product is warranted for 90 days. For full details regarding warranty terms, exclusions and limitations, please visit: mophie.com/warranty. This warranty does not affect any statutory rights that you may be entitled to. Keep a copy of your purchase receipt as proof of purchase. Be sure to register your product at mophie.com.













Safety Precautions

Included Items



Specifications




















product heat.






fire extinguisher.






or fire hazard.









damage equipment.








powerstation go AC.







local guidelines.


(-10°C – 50°C), Charge: 32°F – 113°F (0°C – 45°C)









powerstation go AC.





NOTE:

















COMPATIBILITY





SPECIFICATIONS

Battery Cells:



55500 mWh

Jump Start:

Input:

12V/600Amps

14V/0.85A

USB Output:

Dimensions:

2x USB 5V/2.4A

3.82 x 7.17 x 1.5 inches

Weight: 1.66 lbs

























Safety Precautions

Included Items



Specifications


4-5

6

7-14

10,12

15

16-17



















product heat.






fire extinguisher.







powerstation go AC.

STAY POWERFUL | 3




or fire hazard.









damage equipment.








powerstation go AC.







local guidelines.


(-10°C – 50°C), Charge: 32°F – 113°F (0°C – 45°C)

JUMP START TROUBLESHOOTING TIPS







NOTE:















COMPATIBILITY





SPECIFICATIONS

Battery Cells:



55500 mWh

Jump Start:

Input:

12V/600Amps

14V/0.85A

USB Output:

Dimensions:

2x USB 5V/2.4A

3.82 x 7.17 x 1.5 inches

Weight: 1.66 lbs





















Safety Precautions

Included Items



Specifications









powerstation go AC.





NOTE:





















product heat.






fire extinguisher.




4 | STAY POWERFUL




or fire hazard.









damage equipment.








powerstation go AC.







local guidelines.


(-10°C – 50°C), Charge: 32°F – 113°F (0°C – 45°C)
















COMPATIBILITY





SPECIFICATIONS

Battery Cells:



55500 mWh

Jump Start:

Input:

12V/600Amps

14V/0.85A

USB Output:

Dimensions:

2x USB 5V/2.4A

3.82 x 7.17 x 1.5 inches

Weight: 1.66 lbs





















Safety Precautions

Included Items



Specifications









powerstation go AC.





NOTE:





















product heat.






fire extinguisher.






or fire hazard.









damage equipment.








powerstation go AC.







local guidelines.


(-10°C – 50°C), Charge: 32°F – 113°F (0°C – 45°C)

STAY POWERFUL | 5

















COMPATIBILITY





SPECIFICATIONS

Battery Cells:



55500 mWh

Jump Start:

Input:

12V/600Amps

14V/0.85A

USB Output:

Dimensions:

2x USB 5V/2.4A

3.82 x 7.17 x 1.5 inches

Weight: 1.66 lbs













Safety Precautions

Included Items



Specifications




















product heat.






fire extinguisher.






or fire hazard.









damage equipment.








powerstation go AC.







local guidelines.


(-10°C – 50°C), Charge: 32°F – 113°F (0°C – 45°C)



7

1

2

3

4 5

8

11

6

12

10 9

INCLUDED ITEMS

- powerstation go AC

- Jumper Cables

- Wall Charging Adapter

1 | Jump Start Output

2 | Jump Start Button

3 | Digital Screen

4 | USB ON/OFF Button

5 | USB Outputs

6 | Charging Input

6 | STAY POWERFUL

- USB-A to USB-C Cable

- Carrying Pouch

7 | Floodlight ON/OFF Button

8 | Floodlight/Emergency Light

9 | AC ON/OFF Button

10 | AC Outlet

11 | Wall Charging Adapter

12 | Jumper Cable Clamps








powerstation go AC.





NOTE:

















COMPATIBILITY





SPECIFICATIONS

Battery Cells:



55500 mWh

Jump Start:

Input:

12V/600Amps

14V/0.85A

USB Output:

Dimensions:

2x USB 5V/2.4A

3.82 x 7.17 x 1.5 inches

Weight: 1.66 lbs





























Safety Precautions

Included Items



Specifications




















product heat.






fire extinguisher.






or fire hazard.









damage equipment.








powerstation go AC.







local guidelines.


(-10°C – 50°C), Charge: 32°F – 113°F (0°C – 45°C)








powerstation go AC.





NOTE:



STAY POWERFUL | 7

















COMPATIBILITY





SPECIFICATIONS

Battery Cells:



55500 mWh

Jump Start:

Input:

12V/600Amps

14V/0.85A

USB Output:

Dimensions:

2x USB 5V/2.4A

3.82 x 7.17 x 1.5 inches

Weight: 1.66 lbs





















Safety Precautions

Included Items



Specifications




















product heat.






fire extinguisher.






or fire hazard.









damage equipment.








powerstation go AC.







local guidelines.


(-10°C – 50°C), Charge: 32°F – 113°F (0°C – 45°C)








powerstation go AC.

NOTE:

Make sure the jumper cables are fully plugged into the jump start output before trying to jump your vehicle.









NOTE:



NOTE:

• Once the jumper cable clamps are attached to the vehicle battery,

the LCD will display the vehicle battery voltage.

• Do not touch red (positive) and black (negative) clamps together

at any point.

• If the jump start button flashes red, and the "SAFETY CHECK FAIL"

indicator is visible on the LCD screen,the jumper cables have

been connected incorrectly. If this flashing red condition occurs,

disconnect the jumper cables from vehicle battery and restart the

process from Step 1.

8 | STAY POWERFUL













COMPATIBILITY





SPECIFICATIONS

Battery Cells:



55500 mWh

Jump Start:

Input:

12V/600Amps

14V/0.85A

USB Output:

Dimensions:

2x USB 5V/2.4A

3.82 x 7.17 x 1.5 inches

Weight: 1.66 lbs





















Safety Precautions

Included Items



Specifications




















product heat.






fire extinguisher.






or fire hazard.









damage equipment.








powerstation go AC.







local guidelines.


(-10°C – 50°C), Charge: 32°F – 113°F (0°C – 45°C)








powerstation go AC.


NOTE:
















NOTE:

A flashing green light indicates safety checks are in progress.


NOTE:

If your vehicle fails to start after the first attempt, wait 30 seconds and repeat step 3 and step 4.

If your vehicle does not start after three attempts, we recommend you consult a certified mechanic.


NOTE:

The jump start function can not be used in conjunction with

USB charging or the AC outlet. Please ensure that you have not activated the USB or AC output modes when attempting to jump start your vehicle.

NOTE:

The powerstation go AC is designed to allow a jump start when used within a safe temperature range. A "TEMP" indicator will be illustrated on the digital display if used outside of the temperature operating range.

STAY POWERFUL | 9





COMPATIBILITY





SPECIFICATIONS

Battery Cells:



55500 mWh

Jump Start:

Input:

12V/600Amps

14V/0.85A

USB Output:

Dimensions:

2x USB 5V/2.4A

3.82 x 7.17 x 1.5 inches

Weight: 1.66 lbs





















Safety Precautions

Included Items



Specifications




















product heat.






fire extinguisher.






or fire hazard.









damage equipment.








powerstation go AC.







local guidelines.


(-10°C – 50°C), Charge: 32°F – 113°F (0°C – 45°C)








powerstation go AC.


NOTE:





















COMPATIBILITY






Condition powerstation go AC Jump

Start button has been pressed but nothing happens powerstation go

AC displays a red

"BATT TOO LOW" message

Potential Cause

The USB ON/OFF Button or the

AC Outlet ON/OFF Button has been pressed.

The powerstation go AC is not sufficiently charged to jump start the vehicle.

Solution

The jump start output can not be used in conjunction with the USB output or AC Outlet modes.

Ensure that both USB and AC Outlet modes are off.

Recharge the powerstation go AC and verify at least 50% charged.

Then try the jump start process again. powerstation go

AC Jump Start button flashes red and a

SAFETY CHECK

FAIL message is displayed

The jumper cables have not been properly connected to the vehicle battery.

Check the jumper cables and ensure that the red clamp is connected to the positive terminal (+) and the black clamp is connected to the negative terminal (-).

powerstation go AC Jump

Start button flashes green continuously

The powerstation go AC is waiting to be connected to a battery or a SAFETY

CHECK FAIL has been triggered.

Check the jumper cables and ensure they are properly connected to the battery. Check and ensure the vehicle battery voltage is greater than 2.0V. If the SAFETY

CHECK FAIL indicator is triggered during the jump start process, it is recommended that you consult with a certified mechanic.

powerstation go AC displays a blue or red "TEMP" indicator

The powerstation go AC has detected a low or high temperature condition.

Disconnect the powerstation go AC and allow unit to acclimate to temperature operating range

(14°F-122°F).

You can not successfully jump start your vehicle. The powerstation go AC displays a vehicle battery voltage greater than 12.0V

The powerstation go AC detects that it is connected to a vehicle battery with a normal starting voltage. This could indicate that another vehicle component is faulty.

It is recommended that you consult with a certified mechanic.

powerstation go AC Jump

Start and On/Off button flashes red and blue

This could occur when attempting to jump start a vehicle while other electrical components (i.e. headlights, heater, radio, etc.) are on.

The vehicle battery may be faulty.

Turn off your headlights and any other components that may drain your car battery and try the jump start process again.

It is recommended that you consult with a certified mechanic.

NOTE:

If none of these troubleshooting tips work, please consult a certified mechanic for assistance.

10 | STAY POWERFUL

SPECIFICATIONS

Battery Cells:



55500 mWh

Jump Start:

Input:

12V/600Amps

14V/0.85A

USB Output:

Dimensions:

2x USB 5V/2.4A

3.82 x 7.17 x 1.5 inches

Weight: 1.66 lbs









CHARGING A LAPTOP (VIA THE AC OUTPUT PORT)

1. Connect the AC power plug from your laptop (or other electronic device which is rated at 65 watts or less) into the AC output port of the powerstation go AC charger.

NOTE: Any electronic device can be powered by the AC output port as long as it is rated at 65 watts or less. BE SURE TO CHECK THAT YOUR

LAPTOP OR OTHER ELECTRONIC DEVICE IS RATED AT 65 WATTS OR LESS.

2. Press the AC Power ON/OFF Button and wait for a solid white light

NOTE: Make sure the AC power plug is fully plugged into the AC output port before pressing the AC Power ON/OFF Button.

NOTE: A flashing white light indicates safety checks are in progress.

If you see a flashing red light, the device you connected is rated for greater than 65 watts and cannot be powered using the powerstation go AC charger.

The powerstation go AC charger will automatically power off after 30 minutes of inactivity. While jump starting your vehicle, you cannot charge your electronic devices using the USB or AC output ports and you cannot charge the powerstation go battery via the AC wall adapter.

STAY POWERFUL | 11













Safety Precautions

Included Items



Specifications




















product heat.






fire extinguisher.






or fire hazard.









damage equipment.








powerstation go AC.







local guidelines.


(-10°C – 50°C), Charge: 32°F – 113°F (0°C – 45°C)









powerstation go AC.





NOTE:

















COMPATIBILITY





SPECIFICATIONS

Battery Cells:



55500 mWh

Jump Start:

Input:

12V/600Amps

14V/0.85A

USB Output:

Dimensions:

2x USB 5V/2.4A

3.82 x 7.17 x 1.5 inches

Weight: 1.66 lbs













Safety Precautions

Included Items



Specifications




















product heat.






fire extinguisher.






or fire hazard.









damage equipment.








powerstation go AC.







local guidelines.


(-10°C – 50°C), Charge: 32°F – 113°F (0°C – 45°C)









powerstation go AC.





NOTE:













LAPTOP CHARGING TROUBLESHOOTING TIPS

Condition Potential Cause Solution

Electronic device is rated at greater than 65 watts

Only electronic devices rated at 65 watts or less can be used with the powerstation go AC charger powerstation go

AC power ON/OFF button flashes red

The powerstation go AC battery is not sufficiently charged to power the connected electronic device

Recharge the powerstation go AC battery powerstation go AC shuts off unexpectedly

The powerstation go AC battery is not sufficiently charged to power the connected electronic device

Recharge the powerstation go AC battery powerstation go AC displays a blue or red "TEMP" indicator

The powerstation go AC has detected a low or high temperature condition.

Disconnect the powerstation go AC and allow unit to acclimate to temperature operating range

(14°F-122°F).













COMPATIBILITY





SPECIFICATIONS

Battery Cells:



55500 mWh

Jump Start:

Input:

12V/600Amps

14V/0.85A

USB Output:

Dimensions:

2x USB 5V/2.4A

3.82 x 7.17 x 1.5 inches

Weight: 1.66 lbs









12 | STAY POWERFUL













Safety Precautions

Included Items



Specifications




















product heat.






fire extinguisher.






or fire hazard.









damage equipment.








powerstation go AC.







local guidelines.


(-10°C – 50°C), Charge: 32°F – 113°F (0°C – 45°C)









powerstation go AC.





NOTE:











NOTE:

If your electronic device does not have a USB-C Input, your powerstation go AC is also compatible with the charging cable provided with your electronic device. To use, plug the Standard USB end of the cable into either one of the two 5V/2.4A USB Output ports located on your powerstation go AC.



NOTE:

The powerstation go AC USB charging feature will automatically power off after 30 minutes of inactivity.





COMPATIBILITY





SPECIFICATIONS

Battery Cells:



55500 mWh

Jump Start:

Input:

12V/600Amps

14V/0.85A

USB Output:

Dimensions:

2x USB 5V/2.4A

3.82 x 7.17 x 1.5 inches

Weight: 1.66 lbs









STAY POWERFUL | 13













Safety Precautions

Included Items



Specifications




















product heat.






fire extinguisher.






or fire hazard.









damage equipment.








powerstation go AC.







local guidelines.


(-10°C – 50°C), Charge: 32°F – 113°F (0°C – 45°C)









powerstation go AC.





NOTE:

















COMPATIBILITY



Mobile Phones Tablets Digital Cameras Mobile Gaming



Floodlight ON/OFF Button

NOTE:

Do not look directly into the LED floodlight.

SPECIFICATIONS

Battery Cells:



55500 mWh

Jump Start:

Input:

12V/600Amps

14V/0.85A

USB Output:

Dimensions:

2x USB 5V/2.4A

3.82 x 7.17 x 1.5 inches

Weight: 1.66 lbs









14 | STAY POWERFUL













Safety Precautions

Included Items



Specifications




















product heat.






fire extinguisher.






or fire hazard.









damage equipment.








powerstation go AC.







local guidelines.


(-10°C – 50°C), Charge: 32°F – 113°F (0°C – 45°C)









powerstation go AC.





NOTE:

















COMPATIBILITY





SPECIFICATIONS

Battery Cells:



55500 mWh

Jump Start:

Input:

12V/600Amps

14V/0.85A

USB Output:

Dimensions:

2x USB 5V/2.4A

3.82 x 7.17 x 1.5 inches

Weight: 1.66 lbs









STAY POWERFUL | 15













Safety Precautions

Included Items



Specifications




















product heat.






fire extinguisher.






or fire hazard.









damage equipment.








powerstation go AC.







local guidelines.


(-10°C – 50°C), Charge: 32°F – 113°F (0°C – 45°C)









powerstation go AC.





NOTE:

















COMPATIBILITY





SPECIFICATIONS

Battery Cells:



55500 mWh

Jump Start:

Input:

12V/600Amps

14V/0.85A

USB Output:

Dimensions:

2x USB 5V/2.4A

3.82 x 7.17 x 1.5 inches

Weight: 1.66 lbs









STAY POWERFUL | 16













Safety Precautions

Included Items



Specifications




















product heat.






fire extinguisher.






or fire hazard.









damage equipment.








powerstation go AC.







local guidelines.


(-10°C – 50°C), Charge: 32°F – 113°F (0°C – 45°C)









powerstation go AC.





NOTE:

















COMPATIBILITY





SPECIFICATIONS

Battery Cells:



55500 mWh

Jump Start:

Input:

12V/600Amps

14V/0.85A

USB Output:

Dimensions:

2x USB 5V/2.4A

3.82 x 7.17 x 1.5 inches

Weight: 1.66 lbs









Customer Service

Telephone: 1-888-8mophie (1-888-866-7443)

International: +1 (269) 743-1340

Web: www.mophie.com/cs mophie, powerstation, Stay Powerful, and the mophie logo are trademarks of mophie inc.

All rights reserved. Patents: mophie.com/patents. USB-C is a trademark of USB Implementers Forum.

314-00881-A

Mophie powerstation go AC Power Bank Operating instructions

powerstation

®

go AC

OPERATING INSTRUCTIONS

Customer Service

Related manuals

Mophie

powerstation go rugged AC

Mophie

powerstation go rugged compact

Mophie

Powerstation go air

Mophie

powerstation go rugged

Mophie

powerstation go

Mophie

powerstation go rugged flashlight

Fitbit Zip

VERSA

Mophie

401107035

Mophie

powerstation go rugged compact

Mophie

powerstation 3X

Mophie

powerstation AC

Mophie

PowerStation Pro