Sencore AG 2600 openGear Module Receiver Card Spec Sheet
Add to My manuals3 Pages
Sencore AG 2600 is a powerful and versatile receiver card that offers a range of features for satellite, terrestrial, and IP-based broadcasting applications. It supports a variety of input and output options, including ASI, IP, and DVB-CI, and can be configured for a wide range of applications, including satellite reception and descrambling, IP feed generation, and terrestrial channel capture.
advertisement
Receiver Card
AG 2600
SATELLITE, DVB-T/T2, IP, ASI, VSB,
OR QAM RECEIVER WITH ASI AND IP OUT
OVERVIEW
The AG 2600 receiver card leverages the DVB-S2/S2X,
IP, 8VSB/QAM-B, DVB-T/T2/C/C2/ISDB-T, dual DVB-
CI, and ASI designs from Sencore’s newest receiver decoder cards to provide a cost effective multi-channel reception and descrambling platform.
The card integrates into the industry-standard 2RU openGear ® OG-3 or OG-X frame, supporting up to 10 receiver/descrambler pairs per chassis. The card also support being hosted in the Sencore CRD 4900 chassis.
The AG 2600 is configurable with the DVB-CI option and with optional BISS-1/E/2/CA descrambling support so it can be matched to any reception infrastructure.
The product is ideal for providing satellite or terrestrial feeds for IP network distribution or integrated transcode infrastructure. Optional PID filtering on the IP output can generate up to 10 MPTS or SPTS outputs from an
MPTS input.
Finally, the receiver can be configured with ASI and IP interfaces only for simple turn-around, descrambling, and filtering operations.
Hot swappable cards provide for effortless system expansion, while full SNMP and syslog interfaces and an HTTP-based API support quick and easy integration into multichannel systems. For individual operators, the product features an easy to use web GUI that will be immediately familiar to users of previous Sencore IRDs.
openGear® is a registered trademark of Ross Video
KEY FEATURES
• Extensive automation support via SNMP status, configuration, and traps, HTTP-based APIs, and Syslog
• Shared software and feature-set with Sencore 1RU receivers ensure reliability and interoperability
• Built-in ASI and IP I/O for maximum flexibility
• Available RF and descrambling modules:
√ DVB-S/S2 Interface with Optional Dual DVB-CI
√ DVB-T/T2/C/C2/ISDB-T Interface
√ 8VSB/QAM-B Receiver Designed for A74
√ Codecs auto-detected and switchable on-the-fly
• Failover between any two inputs
• Dual, mirrored TS over IP transmission
• Built-in BISS Mode 1, Mode E, and Multi-key
• Intuitive, straightforward web interface
APPLICATIONS
• Satellite Reception and Descrambling
Receive up to ten transponders in 2RU and descramble via dual DVB-CI slots or BISS 1/E/2/CA. Generate IP and ASI outputs of the full transport stream or a filtered subset.
• Ingest Feeds for Linear OTT Transcoding
Generate up to 10 SPTS multicasts from an incoming distribution feed for downstream, server-based transcoding systems.
• Capture Local Terrestrial Channels for Backhaul
Receive 8VSB signals and output as IP for fiber backhaul to a remote site. Filter the broadcast stream to transmit only HD or SD services.
• Convert between ASI and IP
Connect old and new broadcast equipment while performing simple transport manipulation such as filtering or descrambling.
SPECIFICATIONS
Receiver Card AG 2600
AVAILABLE BASE MODULES
AG 26000A Processing Card with Built-in ASI I/O
AG 26027A Processing Card with Built-in ASI I/O and
Dual Gigabit Ethernet Ports
ASI INPUT/OUTPUT
ASI Input:
ASI Output:
Supported Bitrate:
1x 75Ω BNC
1x 75Ω BNC
250 Kbps to 200 Mbps
IP INPUT/OUTPUT (IF EQUIPPED)
Physical Interface:
Input Format:
Output Format:
MPE De-encapsulation:
IP Encapsulation:
Addressing:
IGMP compatibility:
Per TS Bitrate:
2x RJ45, 10/100/1000 Auto-Negotiate
2x UDP or RTP Streams
Constant Bitrate or Null-Stripped
RTP Header Extensions Supported
SMPTE 2022/CoP3 FEC Supported
10x UDP Streams
Up to 2 PIDs
Up to 60 Mbps per MPE PID
1 to 7 TS Packets per IP Packet
Unicast or Multicast
Version 1, 2 & 3
250 Kbps to 200 Mbps
MPEG/IP FEC Output License
Additional Output Formats:
AG 26925
Adds RTP & SMPTE 2022/CoP3 FEC on 2x Transmit Instances
OPTIONAL BASE MODULE FUNCTIONALITY
BISS-1 Descrambling License
Supported Modes:
AG 26921
Mode 0, Mode 1 with Session Word
Multi-BISS Support:
Mode E with SW and Injected ID
Up to 12 Separate Keys
BISS-2/CA Descrambling License
Supported Modes:
AG 26922
Mode 0, Mode 1 with Session Word
Mode E with SW and Injected ID
Mode CA with Injected Private Key
Multi-BISS Support:
Mode CA with Buried Private Key
Up to 12 Separate Keys
PID/Service Filtering License
Filtering:
AG 26928
5 Independent TS (MPTS or SPTS)
outputs via IP or ASI
Table Regeneration (DVB Mode): PAT regeneration
Table Pass-through (DVB Mode): PMT, CAT, NIT pass-through
Table Regeneration (DVB Mode): PAT, SDT
Table Pass-through (DVB Mode): PMT, CAT, NIT, EIT, RST, TDT, TOT
DVB-S/S2 INPUT MODULE AG 26116A
Physical Interface:
Frequency Range:
Symbol Rates:
DVB-S Modulation Modes:
DVB-S2 Modulation Modes:
LNB Power:
Control Tone Support:
Supported Roll-off Factors:
2x 75Ω BNC
950-2150 MHz
1-45 MSps
QPSK (All FEC Rates)
QPSK/8PSK (All FEC Rates)
16/32APSK (with License)
Off/13/14/18/19VDC @ 450mA
22 kHz On/Off
0.35, 0.25, 0.20, 0.15, 0.10, 0.05
DVB-S2 Advanced Feature License AG 26916
Additional Modulation Modes: 16/32/64APSK (All FEC Rates)
VCM Demodulation Support
Multistream (Single ISI)
DVB-S/S2 INPUT MODULE WITH DVB-CI AG 26137A
Physical Interface: Adds two DVB-CI CAM Slots
Without Multi-Service License: Descrambles Decoded Service Only
With Multi-Service License: Number of Services limited by CAM
DVB-CI Multi-Service Descrambling License
With DVB-CI Capable Input:
AG 26991
Enables Multi-service Descrambling
DVB-S/S2/S2X INPUT MODULE AG 26116B
Physical Interface:
Frequency Range:
Symbol Rates:
2x 75Ω BNC
950-2150 MHz
1-72 MSps with 8PSK/QPSK
1-60 Msps with 16APSK and higher
DVB-S Modulation Modes: QPSK (All FEC Rates)
DVB-S2/S2X Modulation Modes: QPSK/8PSK (All FEC Rates)
LNB Power:
16/32/64APSK (with License)
Off/13/14/18/19VDC @ 450mA
Control Tone Support:
Supported Roll-off Factors:
22 kHz On/Off
0.35, 0.25, 0.20, 0.15, 0.10, 0.05
DVB-S2/S2X Advanced Feature License AG 26916
Additional Modulation Modes: 16/32/64APSK (All FEC Rates)
VCM Demodulation Support
Multistream (Single ISI)
DVB-S/S2/S2X INPUT MODULE WITH DVB-CI AG 26137B
Physical Interface: Adds two DVB-CI CAM Slots
Without Multi-Service License: Descrambles Decoded Service Only
With Multi-Service License: Number of Services limited by CAM
DVB-CI Multi-Service Descrambling License
With DVB-CI Capable Input:
AG 26991
Enables Multi-service Descrambling
8VSB/QAM-B INPUT MODULE
Physical Interface:
Frequency Range:
Sensitivity:
AG 26101A
1x 75Ω BNC
50-1000 MHz
-34 to +40 dBmV (A74 Compliant)
8VSB Standard:
8VSB Channel Plans:
QAM Standard:
QAM Channel Plans:
QAM Constellations:
ATSC A/53E
Broadcast
ITU Annex B/SCTE DVS-031
FCC, IRC, HRC
QAM64, QAM256
+1.605.978.4600
www.sencore.com
SPECIFICATIONS
Receiver Card AG 2600
DVB-T/T2/C/C2/ISDB-T INPUT MODULE
Physical Interface: 1x 75Ω F-Type
Frequency Range:
Bandwidth:
Constellations:
DVB-T:
DVB-T2:
DVB-C:
DVB-C2:
ISDB-T:
AG 26115A
42-1002 MHz
1.7MHz, 5 MHz, 6MHz, 7MHz, 8MHz
QPSK, QAM16, QAM64 (All FEC Rates)
QPSK, QAM16, QAM64, QAM256
(All FEC Rates)
QAM16, QAM32, QAM64, QAM128,
QAM256 (All FEC Rates)
QAM16, QAM64, QAM256,
QAM1024, QAM4096 (All FEC Rates)
QPSK, QAM16, QAM64 (All FEC Rates)
DVB-T/T2/C/C2/ISDB-T INPUT MODULE WITH DVB-CI
AG 26115B
Physical Interface: Adds one DVB-CI CAM Slot
Without Multi-Service License: Descrambles Decoded Service Only
With Multi-Service License: Number of Services limited by CAM
DVB-CI Multi-Service Descrambling License
With DVB-CI Capable Input:
AG 26991
Enables Multi-service Descrambling
MANAGEMENT
User Interfaces:
Automation Interfaces:
Authentication:
Full control via web GUI
SNMP status, control, traps
Syslog alarm output
HTTP Web services API
Local Login, TACACS+
ENVIRONMENTAL CONDITIONS
Power:
Operating Temp:
100-240 VAC 50/60 Hz
Dual, Redundant Supply Available
0° to 50°C
+1.605.978.4600
www.sencore.com
advertisement