Hikvision DS-PM-MO4-H Intrusion Alarm Panel Quick Start Guide

DS-PM-MO4-H

MBUS 4 Outputs Expander

Overview

The DS-PM-MO4-H 4-ch MBUS 4 outputs expander is equipped with 8-bit address DIP switch. It can control 4-ch of normally open (NO) or normally closed (NC) relay output when connecting to the control panel via MBUS.

Physical Interface

Caution

 Power off both the expander and control panel and set the DIP address on the expander before installation.

 Using different device addresses for expander on MBUS.

 The available device address for expander is from 1 to 253. The address 0,254 and 255 are not available.

 Power on the expander before powering on the control panel.

 Insure reliable ground connection for the shell of the expander.

DS-PM-MO4-H MBUS 4 Outputs Expander

Specification

DS-PM-MO4-H MBUS 4 Outputs Expander

Power Supply DC 12V

Operation Temperature -10

℃ to +55

℃

Humidity

Relay

Dimension(L*W*H)

Weight

10% to 90%

30 VDC / 1A

114 mm *187 mm *31 mm

956g