advertisement
SmartZone
™
G5 Dry Contact Cable
s p e c i f i c a t i o n s
The dry contact cable is an input to the G5 iPDU and designed to monitor a change in contact state. This is ideal for setting an alarm or other changes that the user may want to be notified of. The dry contact cable can be extended
(up to 30.5 m) using a standard RJ-45 coupling.
t e c h n i c a l i n f o r m a t i o n
Dimensions:
Mounting:
Length:
1.23 x 0.70 x 0.40 inches [44 x 21 x 11 mm] cable ties and adhesive backed mounts
1.8 m RJ45, 1.8m sensor cable
*Mounting hardware included k e y f e a t u r e s a n d b e n e f i t s
Monitoring contact state Monitors contacts and can log or alert on a change of state
RJ45 connection
Versatile mounting
Utilizes a RJ45 quick disconnect coupler to connect sensor cable to any standard ethernet cable
Offers versatile mounting options to accommodate easy deployment inside a rack or within a room within a data center or facility building
S P E C I F I C A T I O N S H E E T
SmartZone ™ G5 Dry Contact Cable
Dry contact cable: ACC01 a p p l i c a t i o n s
The dry contact cable is an input to the G5 iPDU and designed to monitor a change in contact state. This is ideal for setting an alarm or other changes that the user may want to be notified of. These sensors are designed for indoor mounting to a rack or cabinet in a data center or facility.
Easily install by attaching the open wire leads on the dry contact cable to a dry contact sensor. Connect the RJ-45 jack of the dry contact cable to a sensor port on the PDU, or
Sensor Hub. Finally, go to the Web UI of the iPDU to setup specific conditions to monitor and alarm the sensor.
www.panduit.com
SmartZone
™
G5 Dry Contact Cable
t e c h n i c a l s p e c i f i c a t i o n
Electrical
Operational voltage
Measuring range
Physical
Length
Wire type
Environmental
Maximum elevation, above MSL
(Operating/Storage)
Temperature (Operating/Storage)
Humidity (Operating/Storage)
Compliance
Environmental Verification
5V DC
<2MOhms per cm
3.6 m
CAT.5E Patch Cable, UTP
0-10000 feet (0-3048m)/0-50000 feet (0-15240 m)
0°C~+70°C (32~ 158°F)/-20~ + 70°C (-4 ~ 158°F)
0–95% RH, non-condensing
ROHS, WEEE
Sensor Inventory
Dry Contact Cable Cable TIes
(quantity: 5)
RJ45 Quick Disconnect Coupler to connect sensor cable to any standard ethernet cable
Adhesive Backed Mount
(quantity: 5)
Standard Ethernet
Extension Cable
1.8m in length
Note: The Spot Fluid Leak Sensor is only designed to connect to an iPDU. Connecting it to another device may result in damage.
PANDUIT US/CANADA
Phone: 800.777.3300
PANDUIT EUROPE LTD.
London, UK [email protected]
Phone: 44.20.8601.7200
WORLDWIDE SUBSIDIARIES AND SALES OFFICES
PANDUIT SINGAPORE PTE. LTD.
Republic of Singapore [email protected]
Phone: 65.6305.7575
PANDUIT JAPAN
Tokyo, Japan [email protected]
Phone: 81.3.6863.6000
PANDUIT LATIN AMERICA
Guadalajara, Mexico [email protected]
Phone: 52.33.3777.6000
For a copy of Panduit product warranties, log on to www.panduit.com/warranty
For more information
Visit us at www.panduit.com
Contact Customer Service by email: [email protected]
or by phone: 800.777.3300
PANDUIT AUSTRALIA PTY. LTD.
Victoria, Australia [email protected]
Phone: 61.3.9794.9020
©2017 Panduit Corp.
ALL RIGHTS RESERVED.
PUSP69--WW-ENG
8/2017
advertisement