Fisher-Price K3800 Instructions Manual

K3800 as it contains important information.

Requires four “C” batteries (included) for operation.

Batteries included are for demonstration purposes only.

Adult assembly is required for battery replacement and crib attachment.

Tool required for battery replacement: Phillips screwdriver (not included).

fisher-price.com

Consumer Information

CONSUMER ASSISTANCE

1-800-432-5437 (US & Canada)

1300 135 312 (Australia)

Fisher-Price, Inc., 636 Girard Avenue, East Aurora, NY 14052.

Hearing-impaired consumers: 1-800-382-7470.

Outside the United States:

Canada: Mattel Canada Inc., 6155 Freemont Blvd.,

Mississauga, Ontario L5R 3W2; www.service.mattel.com.

Great Britain: Mattel UK Ltd, Vanwall Business Park,

Maidenhead SL6 4UB. Helpline: 01628 500303. www.service.mattel.com/uk

Mattel Europa B.V., Gondel 1, 1186 MJ Amstelveen, Nederland.

Australia: Mattel Australia Pty. Ltd., 658 Church Street,

Locked Bag #870, Richmond, Victoria 3121 Australia.

New Zealand: 16-18 William Pickering Drive,

Albany 1331, Auckland.

ICES-003

This Class B digital apparatus complies with Canadian ICES-003. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation.

NMB-003

Cet appareil numérique de la classe

B est conforme à la norme NMB-003 du Canada. L’utilisation de ce dispositif est autorisée seulement aux conditions suivantes : (1) il ne doit pas produire de brouillage et (2) l’utilisateur du dispositif doit être prêt à accepter tout brouillage radioélectrique reçu, même si ce brouillage est susceptible de compromettre le fonctionnement du dispositif.

FCC Statement (United States Only)

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to

Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Consult the dealer or an experienced radio/TV technician for help.

Note: Changes or modifi cations not expressly approved by the manufacturer responsible for compliance could void the user’s authority to operate the equipment. This device complies with

Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation.

PRINTED IN CHINA

©2012 Mattel. All Rights Reserved.

2

K3800c-0920

Battery

Replacement

Battery Safety

Information

1,5V x 4

“C” (LR14)

For best performance, we recommend replacing the batteries that came with this toy with four “C” (LR14) alkaline batteries.

• Loosen the screws in the battery compartment door with a Phillips screwdriver and remove the door.

Remove the batteries and dispose of them safetly.

• Insert four, new “C” (LR14) alkaline batteries.

• Replace the battery compartment door and tighten the screws with a Phillips screwdriver. Do not over-tighten.

• If sounds, lights or motions become faint or stop, it's time for an adult to change the batteries.

• Protect the environment by not disposing of this product with household waste

(2002/96/EC). Check your local authority for recycling advice and facilities.

3

In exceptional circumstances, batteries may leak fluids that can cause a chemical burn injury or ruin your product. To avoid battery leakage:

• Do not mix old and new batteries or batteries of different types: alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium).

• Insert batteries as indicated inside the battery compartment.

• Remove batteries during long periods of non-use. Always remove exhausted batteries from the product. Dispose of batteries safely. Do not dispose of product in a fire. The batteries inside may explode or leak.

• Never short-circuit the battery terminals.

• Use only batteries of the same or equivalent type, as recommended.

• Do not charge non-rechargeable batteries.

• Remove rechargeable batteries from the product before charging.

• If removable, rechargeable batteries are used, they are only to be charged under adult supervision.

Crib Attachment

WARNING

Prevent Entanglement Injury

•

This product may not attach to all crib designs.

•

Do not add additional strings or straps to attach to a crib or playpen.

•

Use ONLY attached to a crib.

Slottt

IMPORTANT! Always attach all provided fasteners (strings, straps, clamps, etc.) tightly to a crib or playpen according to the instructions. Do not add additional strings or straps to attach to a crib.

Check frequently.

Attachment

Strap

Button

1

• Position the toy inside the crib.

• Wrap one of the toy’s attachment straps around the crib top rail.

• Fasten the attachment strap slot to the button on the back of the toy.

This toy should be snug against the crib top rail and spindles. Use the strap slot that provides the tightest fit.

• Repeat this procedure to secure the other attachment strap.

4

Crib Attachment

At least

2

• Tie the toy’s strings to a crib spindle.

Note: It is better to tie the strings in a knot than a bow, since a bow may be easily untied.

3

• Make sure the distance between the bottom of the toy and the crib mattress is at least 7 inches (18 cm) .

• If the distance is less than 7 inches

(18 cm): readjust the attachment strap to lift the product; or lower the crib mattress.

5

Gentle Motion and Soft Lights!

Press the toucan

Power/Volume Switch

ON with low volume,

ON with medium volume

OFF

Note: If this toy begins to operate erratically, you may need to reset the electronics. Slide the power/ volume switch off and then back on.

Sounds Select Switch

Rainforest Sounds without Music

Rainforest Sounds and Lullabies

Classical Music with

Rainforest Sounds

6

Light and Motion Select Switch

6 Minutes of Lights,

Motion and Music

12 Minutes of Lights and Music

18 Minutes of Music

Care

• To clean, wipe the surface of this toy with a damp cloth. Do not immerse this toy.

• This toy has no consumer serviceable parts. Please do not take this toy apart.