INSTRUCTIONS
ENGLISH
COLOR CCD CAMERA
CU-V801U
Dear Customer,
Thank you for purchasing the JVC color CCD camera. Before use, please read the safety information and precautions to ensure safe use of your new color CCD camera.
This unit is for consumer use only and cannot be used as a professional product.
SAFETY PRECAUTIONS
WARNING:
TO PREVENT FIRE OR SHOCK HAZARD, DO
NOT EXPOSE THIS UNIT TO RAIN OR
MOISTURE.
LYT0008-045A
CAUTIONS:
n To prevent shock, do not open the cabinet. No user serviceable parts inside. Refer servicing to qualified personnel.
n When you are not using the AC Power Adapter for a long period of time, it is recommended that you disconnect the power cord from AC outlet.
This color CCD camera is designed to be used with
NTSC-type color television signals. It cannot be used with a television of a different standard. Use the optional multivoltage AC Power Adapter as described on the other side of this sheet. (An appropriate conversion adapter may be necessary to accommodate different designs of AC outlets in different countries.)
NOTE:
The rating plate (serial number plate) is located near the pivot joint of the lens barrel of the unit.
IMPORTANT SAFETY INSTRUCTIONS
When using the color CCD camera, basic precautions should always be followed including following.
WARNING/ To reduce the risk of fire, electric shock, or injury, read all instructions carefully before using this color CCD camera.
PRECAUTIONS WHEN USING OR STORING CCD
CAMERA
● Keep your camera free from oil vapour or steam.
Never put your camera at a place exposed to oil vapour or steam.
This may cause trouble in your camera.
● Keep your camera away from a heater or direct sunlight.
Leaving your camera in the direct sunlight or near a heater may damage the cabinet and the parts of your camera.
● Keep your camera free from water and moisture.
Do not use this product near water for example, near a bath tub, wash bowl, kitchen sink, or laundry tub; in a wet basement; or near swimming pool; and the like.
● Never use your camera outdoors.
You can use this camera only indoors.
● Be sure to use the appropriate power adapter (see back) at rated voltage.
Using a wrong power adapter or wrong voltage may cause fire or serious damage that cannot be restored.
Do not overload wall outlet, extension cords, or integral convenience receptacles as this can result in a risk of fire or electric shock.
● Never use your camera under high temperatures.
Be sure to use your camera in ambient temperatures of
0°C – 40°C.
Using your camera under high temperatures may deform the cabinet as well as cause other troubles.
● Never direct the lens of your camera to the sun.
Irrespective of using or not using your camera, never allow the light of the sun to directly come into the lens of your camera.
● Keep your camera free from moisture and dust.
Never leave your camera in such a place as is too moist and dusty.
This may cause trouble in your camera.
PRECAUTIONS FOR HANDLING
● Handle your camera carefully.
Be careful not to drop your camera or give it strong shock or vibration.
Enough care should be taken when carrying it too.
Shock and vibration may cause damage to your camera.
A product and cart combination should be moved with care.
Quick stops, excessive force, and uneven surfaces may cause the product and cart combination to overturn.
● Keep lighting equipment away from your camera.
If you have lighting equipment near your camera, the heat emitted from the lighting equipment may cause deformation or failure to your camera.
Be sure to use any lighting equipment away from your camera.
● Dirt on the cabinet should be wiped out lightly with a soft cloth.
If these parts become badly dirty, wipe out the dirt with a cloth wrung out well after being submerged in a water-thinned detergent and finish with a dry cloth.
● Most surface of the cabinet is made of plastics.
Wiping it with benzine and thinner may cause the painted film to deteriorate or come off.
● Never use disinfectant.
Never use disinfectant of other volatile components near your camera.
Or, never leave rubber or vinyl products in contact with your camera for a long time.
This may deteriorate the surface of the cabinet.
OPERATION
n Lens n Microphone n Power LED indicator n Focus adjust ring
Adjust the focus by turning the ring left/right (5 cm – infinity) n AC adapter connecting terminal
Connect to AC adapter.
• •
I ON
OFF
POWER n Power switch n Video and audio output terminal
Connect to video and audio input terminal of your TV set or system.
n Tripod mounting socket
POWER SOURCE CONNECTION
Use the provided AC Adapter.
AV CABLE CONNECTION
● Use the provided 1.5 m AV cable.
● For longer distance connections, use the optional AV extension cable (JVC No. VC-V3731J/20 m) as well.
ATTACHING THE CAMERA TO THE
CEILING
● Use the optional ceiling mount kit (JVC No. CU-V602J).
● Be sure to refer to its instruction manual during installation.
SPECIFICATIONS
TV system
Total pixels
Effective pixels
: NTSC
: 537 (H) x 505 (V)
: 510 (H) x 492 (V)
Horizontal resolution
S/N raito
Minimum illumination
Video output signal
Output connector
Focus range
:
: 310 TV Lines
46 dB
: 12 lx
: 1.0 Vp-p/75
Ω
(composite video signal)
: RCA pin jack
: Manual adjustment 5 cm —
AC adapter input voltage : DC 9 – 12 V
Power consumption : Approx. 2 W
Microphone
Dimensions
Weight
: Non-directional electret condenser
: 100 (W) x 61 (H) x 100 (D) mm
: Approx. 150 g
Provided Accessories
AC Adapter, AV Cable (1.5 m)
Optional Accessories
AV Cable
Installation Adapter
: VC-V3731J (20 m)
: CU-V602J
E. & O. E. Design and specifications subject to change without notice.
© 1997 VICTOR COMPANY OF JAPAN, LTD.
