advertisement
0
Digital
Photo
Frame
With
3
‐
D
Effect
(EF3D08)
User
Manual
1
Table of Content
Safety Precautions
What is in the box
Introduction
Frame Overview & Remote Control Key Assignment
Operation Guide
Install & Play
Use Remote Control
Change Settings
Top Menu
Clock
Slide
& Calendar show
Firmware Update
Technical Specification
Trouble Shooting
10
10
11
5
6
7
7
8
9
2
2
3
4
5
Important Safety Precautions
Always follow these basic safety precautions when using this digital photo frame to reduce the risk of fire, electric shock and injury.
Do not expose this product to rain or moisture.
Do not remove cover.
There are no self ‐ serviceable parts inside.
Refer all servicing to qualified personnel.
Indoor use only.
Unplug this frame before maintenance.
Do not block the ventilation holes on the back of this frame.
Keep this frame out of direct sunshine and/or any heat sources.
Use only the AC/DC adapter included with this frame.
Cleaning the LCD screen
Treat the screen gently.
To clean fingerprint or dust, use a soft, non ‐ abrasive and lint free cloth
to clean the screen.
When using a commercial LCD cleaning kit, do not apply the cleaning liquid directly to the
screen.
Clean the screen with a cleaning cloth moistened with the fluid.
What is in the box (Package Content):
Digital Photo Frame
User Manual
AC/DC power adapter
Quick Start Guide
Remote Control
2
Introduction
Congratulation and thank you for choosing the Digital Photo Frame with multi 3 ‐ D transition effects.
Now you can enjoy your digital photos with background music directly from your memory cards and/or USB drives without a computer.
You will be surprised to the realistic 3 ‐ D
transition effects.
This Digital Photo Frame includes these key features:
Display digital photos (.jpg) without a computer.
Simply insert a compatible memory card and/or USB drives into the frame to show photos and play background music.
8” Digital LCD Panel
High Resolution (800x600)
Support SD/MMC/MS/xD cards and CF card.
Multi 3 ‐ D effect transition Slide show with Mp3 background music.
Thumbnail display/searching.
Control buttons on the frame and full function Remote Control.
Bright high resolution LCD screen.
Earphone jack
USB 2.0
high speed connection.
Firmware Updatable
To learn more about your new Digital Photo Frame’s features, please take a few minutes to read this User Manual.
Keep this manual for your future references.
3
Frame Overview
Remote Control Key Assignment
4
Operation Guide
Install & Play
1.
Take out the Digital Photo Frame and set it up on a flat surface.
Connect the power cord of the AC/DC power adapter to a wall outlet.
Then connect the other end to the
Frame.
2.
Insert a Memory Card or a USB drive (consisting of at least one photo file .jpg
and one music file mp3) into the proper port on the frame.
(Don’t force it in.
Flip over the Card or USB drive if it does not fit.)
3.
Power on by pressing the power button on the frame or on the remote.
4.
After a brief home page logo and loading page, a photo slideshow will start automatically.
5.
Background music will also start playing one after another automatically.
(Note: 1.
If you don’t have a storage device, skip step 2 and the top menu as follow will appear.
2.
But when you have a card or a USB drive and insert it, the slide show will start automatically.)
(Top Menu)
5
Use Remote Control
Power: On/Off
Mute: Speaker volume On/Off
Photo: Go to photo slide show
Top: Go to Top Menu screen
Clock: Go to Clock & Calendar
Mode: Switch Transition mode or Clock display mode
Menu: Bring up Pop ‐ up Menu
Up/Down arrows: Move cursor up/down or select music file
Left/Right arrows: Move cursor left/right or choose previous/next photo to display
Enter: Select or switch between play/pause
Setup: Go to Top Menu Setting screen
Exit: Return to Top Menu
Thumb: Display all photos in thumbnail display mode for your quick searching
6
VOL+/VOL ‐ : Volume Up/Down
Change Settings
Top Menu: To change settings under Top Menu, press “SETUP” on the remote control or use Up/Down keys and Enter key either on the Frame or the Remote to enter into the Settings
on the Top Menu as follows:
Exit: Exit to Top Menu
Current Date: Set up/Adjust Date
Current Time: Set up/Adjust Time
Switch Hour Mode: Choose 12H/24H
Date Order: Three orders to choose from
ON Timer: Set “Automatic On” time
OFF Timer: Set “Automatic Off” time
Brightness: Set brightness level 1 ‐ 10
Volume: Set background music volume level 1 ‐ 10
Language: Choose from three languages
Orientation: Choose Landscape or Portrait
Trimming Mode: Switch photo display format, “Fit” or “Crop”
Update Firmware: Display your current firmware version and check if there is updated firmware available on your memory card
Reset Settings: Reset your digital photo frame to manufacturer default settings
Note: Use Cursor keys to move around and make changes and use Enter key to select and save.
7
Clock & Calendar:
Press Clock on remote control or use Up/Down keys and Enter key either on the Frame or the Remote to display Clock/Calendar screen as follows:
Press Menu key to bring up a pop ‐ up menu:
Clock: Choose Digital or Analog clock to display
Foreground: Choose Calendar or Clock to be the main display
Background: Choose Bright, Dark or Photo background
Brightness: Change brightness on the scale of 1 to 10
Close: Close pop ‐ up menu
Note: Use Cursor keys to move around and make changes and use Enter key to select and save.
8
Slide show: Use MENU key on the Frame or Remote Control to bring up the Pop ‐ up
menu as follows while playing slide show.
Slide show: Play or Pause
Transition: Switch among multiple 2 ‐ D and 3 ‐ D transition effects or set to random
BGM: Back ground music On or Off
Interval: Choose slide show intervals ‐ 5 sec.
10 sec.
15sec.
30 sec.
or 1 min.
Rotation: Rotate the current photo displayed
Brightness: Change brightness
Volume: Change speaker volume
Date/Time: Turn on ‐ screen ‐ display Date/Time on or off
Close: Close pop ‐ up menu
Note: Use Cursor keys to move around and make changes and use Enter key to select and save.
9
Firmware Update:
Firmware in the system can be updated from firmware binary file placed in the root directory of a memory card (USB memory is not supported for firmware update) with specific file name.
When “Update firmware” is selected from the Setting menu and a valid firmware file is detected, a confirmation message will be displayed before proceeding with the update.
When there is no valid firmware detected, a warning message will be displayed and then return
to the Setting Menu.
Technical Specification
Screen Size/Mode (Diagonal)
Resolution
Brightness
Contrast Ratio
View Angle
Interface
Memory Card Format
File Format
OSD Language
Clock/Calendar
Thumbnail Display
Photo Slide Show
Firmware Update
USB connection
Earphone Jack
Built ‐ in Speakers
Power Adapter
Power Consumption
Remote Control
Unit Dimension(WxHxD)
Unit Weight
8.0” LCD/ 4:3
800RGBx600 (SVGA)
200cd/m2
300:1
50/65/65/65
Digital
SD/MMC/MS/xD, CF
JPEG, MP3
English, French, Spanish, German
Yes
Yes
Multiple 2 ‐ D and 3 ‐ D transition effects
Support
USB 2.0
Yes, Stereo
1w x 2
AC100V ~ 240V, 50Hz / 60Hz, DC 5V
<10w
Full function
9.65x7.72x1.44
inches
1.52
lbs
10
11
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement