Teknik 5420275 Instruction Booklet

www.teknikoffice.co.uk

Teknik

Guaranteed to hold other beverages , too.

Industrial Style

Coff ee Table

Model

5420275

NOTE: THIS INSTRUCTION

BOOKLET CONTAINS IMPORTANT

SAFETY INFORMATION.

PLEASE READ AND KEEP FOR

FUTURE REFERENCE.

Table of Contents Assembly Tools Required

Part Identifi cation

Hardware Identifi cation

Assembly Steps

3

3

4-5

No. 2 Phillips Screwdriver

Tip Shown Actual Size

Skip the power trip.

This time.

Page 2

Part Identifi cation

Now you know our ABCs.

å While not all parts are labeled, some of the parts will have a label or an inked letter on the edge to help distinguish similar parts from each other. Use this part identifi cation to help identify similar parts.

A END (2)

B TOP (1)

C BOTTOM (1)

D BRACE (4)

B

A

A

D

C

D

D

Hardware Identifi cation

å Screws are shown actual size. You may receive extra hardware with your unit.

1 1-3/8" ALLEN SCREW - 8 2 1-3/16" ALLEN SCREW - 4

3 1-1/8" SCREW - 4

4 ALLEN WRENCH - 1

Page 3

Step 1

å

Assemble your unit on a carpeted fl oor or on the empty carton to avoid scratching your unit or the fl oor.

å

NOTE: Start all of the SCREWS before tightening any of them.

å

Fasten the ENDS (A) to the BRACES (D). Tighten eight 1-3/8"

ALLEN SCREWS (1) using the ALLEN WRENCH (4).

å

Square up the BRACES (D) to the ENDS (A).

å

Completely tighten all of the SCREWS.

1

1-3/8" ALLEN SCREW

(8 used in this step)

D

D

A

D

D

A

4

Page 4

Step 2

å

Fasten the TOP (B) to the ENDS (A). Tighten four 1-3/16" ALLEN SCREWS (2) into the threaded inserts in the TOP using the ALLEN WRENCH (4).

å

NOTE: Start all of the SCREWS (2) before tightening any of them.

å

Fasten the BOTTOM (C) to the ENDS (A). Use four 1-1/8" SCREWS (3).

å

NOTE: Do not overtighten the SCREWS (3).

å

Carefully stand your unit upright.

å

NOTE: Please read the back pages of the instruction booklet for important safety information.

å

This completes assembly. Clean with your favorite furniture polish or a damp cloth. Wipe dry.

2

1-3/16" ALLEN SCREW

(4 used in this step)

A

4

B

Sur face with holes

C

Sur face with holes

A

50 lbs.

40 lbs.

3

1-1/8" SCREW

(4 used in this step)

Page 5

Look out for:

• Overloaded shelves.

WARNING

Please use your furniture correctly and safely. Improper use can cause safety hazards, or damage to your furniture or household items. Carefully read the following chart.

What can happen:

• Risk of injury.

• Top-heavy furniture can tip over.

• Overloaded shelves can break.

How to avoid the problem:

• Never exceed the weight limits shown in the instructions.

• Work from bottom to top when loading shelves. Place the heavier items on the lower shelves.

• Placing TVs on furniture items that are not designed to support a television is hazardous.

• Risk of injury or death. TVs can be very heavy. Plus the weight and location of the picture tube tends to make TVs unbalanced and prone to tipping forward.

• This product is not designed to support a television.