Trendnet TE100-S24 Network Switch Specification Guide
Add to my manuals
2 Pages
Trendnet TE100-S24 is a high-performance 24-port 10/100Mbps NWay Fast Ethernet Switch designed to optimize network traffic and alleviate congestion. It supports auto-negotiation between 10Base-T and 100Base-TX network speeds and half and full duplex modes, ensuring seamless integration with existing network devices.
advertisement
TE100-S24
24-Port 10/100Mbps NWay Fast Ethernet Switch
TRENDnet's TE100-S24 is a high performance, auto-sensing
24-port NWay rack-mountable Fast Ethernet Switch. It is designed to eliminate unnecessary traffic and relieve congestion on critical network paths. With 10/100Mbps NWay technology, the TE100-S24 automatically negotiates between
10Base-T and 100Base-TX network speeds, as well as half and full duplex modes. The auto MDI-II/MDI-X detection on each port automatically detects and corrects for crossover connection and allows direct switch-to-switch or switch-tohub connection for your networking needs.
TRENDnet
TRENDware, USA
What's Next in Networking
FEATURES
24 10/100Mbps NWay Auto MDI-II/MDI-X ports
Integrate address Look-Up Engine, supports up to 8K absolute
MAC address
2.5Mb internal RAM for frame buffering
Full/half duplex transfer mode for each port
Wire-speed filtering/forwarding rates
IEEE 802.3x flow control for full-duplex mode
Back pressure flow control for half-duplex mode
Store-and-forward switching method
Extensive front-panel diagnostic LEDs
No cooling fan, for quite operation
5-Year Warranty
BENEFITS
Performance:
Top performance at an affordable price.
Easy Upgrade:
Current Ethernet workgroups are able to upgrade to Fast Ethernet by changing adapters and hubs without changing switches.
Flexibility:
All ports automatically negotiate
10/100Mbps network speed, half/fullduplex mode, and MDI-II/MDI-X connector type.
Cost Effective:
Provide 10/100Mbps network connection at an affordable rate.
TE100-S24 (03-09-2005)
SPECIFICATIONS
Standards:
• IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, ANSI/IEEE
802.3 NWay auto-negotiation
Connectors:
• 24 10/100Mbps shielded RJ45 Auto MDI-II/MDI-X ports
Network Cables:
• Cat. 3, 4, 5 UTP/STP for 10Base-T; Cat. 5 UTP/STP for 100Base-TX
Protocols:
• CSMA/CD
Data Transfer Rate:
• Ethernet: 10Mbps (Half-Duplex), 20Mbps (Full-Duplex)
• Fast Ethernet: 100Mbps (Half-Duplex), 200Mbps (Full-Duplex
Data RAM Buffers:
• 2.5MB per device
Filtering Address Table:
• 8K entries per device
Internal Power Adapter:
• 100~240 VAC, 10 watts max. Diagnostic LEDs: Power,
Link/Activity, 100Mbps
Weight:
• appr. 2.0 Kg (4.4 lb.)
Dimensions:
• 440 x 140 x 44 mm (17.3 x 5.51 x 1.73 inch) (W x H x D)
Temperature:
•
•
Operating: 0° ~ 40°C (32° ~ 104°F),
Storage: -10° ~ 70°C (14° ~ 158°F)
Humidity:
•
•
Operating: 10% ~ 90% RH,
Storage: 5% ~ 90% RH
Emission:
• FCC Class A, CE Mark A, VCCI-A
NETWORKING SOLUTIONS RELATED PRODUCT
TE100-S24:
24-port 10/100Mbps NWay Switch (Rack Mount)
TE100-S16:
16-port 10/100Mbps NWay Switch (Rack Mount)
ORDERING INFORMATION
TRENDware International, Inc.
3135 Kashiwa Street
Torrance, CA. 90505. USA
Tel: 310-891-1100
Fax: 310-891-1111
Web: www.TRENDNET.com
Email: [email protected]
TRENDnet
TRENDware, USA
R
To Order Please Call:
1-888-326-6061
TRENDnet is a registered trademark of TRENDware International, Inc. Other Brands and product names are trademarks of their respective holders. Information provided in this document pertain to TRENDware products and is subject to change at any time, without notice. For the most recent product information please visit http://www.TRENDNET.com.
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement