SULLAIR RH Series, high-temperature refrigerated compressed air dryers, reduce the moisture content in compressed air to an incredibly low level, specifically tailored for high ambient temperature areas and applications. These dryers offer exceptional performance and durability, making them ideal for a wide range of industrial applications.
Advertisement
Advertisement
Failure to follow the instructions and procedures in this manual or, misuse of this equipment will
VOID its warranty!
PART NUMBER:
02250195-401 R00
©
The information in this manual is current as of its publication date, and applies to compressor serial number :
and all subsequent serial numbers.
Sullair Air Care Seminars are courses that provide hands-on instruction for the proper operation, maintenance, and servicing of Sullair products. Individual seminars on Industrial compressors and compressor electrical systems are offered at regular intervals throughout the year at Sullair’s corporate headquarters training facility located at Michigan City, Indiana.
Instruction includes training on the function and installation of Sullair service parts, troubleshooting common faults and malfunctions, and actual equipment operation. These seminars are recommended for maintenance, contractor maintenance, and service personnel.
For detailed course outlines, schedule, and cost information contact:
S ULLAIR T RAINING D EPARTMENT
1-888-SULLAIR or
219-879-5451 (ext. 5623) www.sullair.com
Sullair Corporation
3700 E. Michigan Blvd.
Michigan City, IN 46360
Attn: Service Training Department.
INSTALLATION LAYOUT REQUIREMENTS
TABLE OF CONTENTS
ELECTRICAL CONNECTION REQUIREMENTS
STEPS TO UNDERTAKE BEFORE OPERATING
STARTUP AND SHUT DOWN PROCEDURE
P&I—RD1000-1200-1600-2000-2400-3000-3800-5000-6000
P&I—RD1000-1200-1600-2000-2400-3000-3800-5000-6000
WIRING DIAGRAM—RN5-10-15-20-25
TABLE OF CONTENTS
WIRING DIAGRAM—RN250-325 (230-3-60-A)
WIRING DIAGRAM—RN250-325 (230-3-60-A)
WIRING DIAGRAM—RN250-325 (460-3-60-A, 400-3-50-A)
WIRING DIAGRAM—RN250-325 (460-3-60-A, 400-3-50-A)
TABLE OF CONTENTS
WIRING DIAGRAM—RD400 (230-3-60-A)
WIRING DIAGRAM—RD400 (230-3-60-A)
WIRING DIAGRAM—RD400 (460-3-60-A, 400-3-50-A)
WIRING DIAGRAM—RD400 (460-3-60-A, 400-3-50-A)
WIRING DIAGRAM—RD500/700 (230-3-60-A)
WIRING DIAGRAM—RD500/700 (230-3-60-A)
WIRING DIAGRAM—RD (500/700/850-1000-1200-1600-2000-2400-
3000-3800-5000-6000)-460-3-60-A, 400-3-50-A
WIRING DIAGRAM—RD (500/700/850-1000-1200-1600-2000-2400-
3000-3800-5000-6000)-460-3-60-A, 400-3-50-A
WIRING DIAGRAM—RD700-850 (230-3-60-W)
WIRING DIAGRAM—RD700-850 (230-3-60-W)
WIRING DIAGRAM—RD (700-850-1000-1200-1600-2000-2400-3000-
3800-5000-6000) 460-3-60-W, 400-3-50-W
WIRING DIAGRAM—RD (700-850-1000-1200-1600-2000-2400-3000-
3800-5000-6000) 460-3-60-W, 400-3-50-W
CONTROL CIRCUIT—RD400-500-700-850-1000-1200-1600-2000-2400-
POWER CIRCUIT—RD400-500-700-850-1000-1200-1600-2000-2400-
SAFETY
The dryer has been designed and constructed in accordance with the generally recognized rules pertaining to refrigeration technology as well as industrial safety and accident prevention regulations.
The equipment design, development, production, assembly and customer service fall under the Sullair quality control system.
The dryer is state of the art. There are, however, hazards to the body, equipment and life accompanying this type of product if it is not operated for the purpose which it is intended by trained and specialized personnel.
The equipment supplied is intended exclusively for drying compressed air. Any other use or one exceeding this is considered unauthorized. Sullair cannot be held liable for damages resulting from incorrect or unauthorized use of the equipment. Any such risk is carried solely by the end user.
Authorized use means complete compliance with all of the conditions of operation, servicing and maintenance prescribed by Sullair in this Instruction and Operation Manual.
The dryer is only to be operated, serviced and repaired by trained personnel who are familiar with this type of equipment and understand fully its operation and any potential dangers.
The end user and operator must observe all National,
State, and Local industrial and safety regulations dealing with the operation of pressure vessels under compressed air service. Also all “end user” safety rules for the same type of service must be adhered to. The following points list some of the important factors dealing with this type of equipment.
• Never make any constructional changes to the equipment
• Use only original spare parts and accessories
• Never weld on any pressure vessel or modify it in any way
• All maintenance on “pressure parts” must be carried out with the equipment shutdown, depressurized and locked out. Any in plant procedures or work permits regarding pressure vessels are to be adhered to.
• Do not operate the equipment with the control panel door open, the electrical system energized and live parts exposed.
• Disconnect the dryer from the electrical supply when any electrical work is performed. Lock out the safety disconnect and obtain any required work permits.
7
8
NOTES
RH SERIES—HIGH TEMPERATURE
RH-0015-115-60-A RH-0025-115-60-A RH-0035-115-60-A RH-0075-115-60-A RH-0100-115-60-A
9
RH SERIES—HIGH TEMPERATURE SECTION 2
Pay attention to the Minimum and Maximum operating conditions before installing and operating the dryer.
Normal Operating Pressure
Normal Operating Temperature
Normal Ambient Temperature
Maximum Operating Pressure
Minimum Operating Pressure
Maximum Ambient Temperature
Minimum Ambient Temperature
Maximum Operating Temperature
If your application does not match the above criteria, contact your Sullair distributor and they will be able to provide the right dryer for your application.
The RH series of Non-cycling Refrigerated Air Dryers are specially designed for compressed air systems that do not use an after cooler. The hot compressed air from the compressor enters the downstream receiver tank where condensed moisture is removed
175 PSIG
200 Deg. F
100 Deg. F
230 PSIG
80 PSIG
120 Deg. F
40 Deg. F
240 Deg. F with an automatic drain. The hot saturated air is then passed directly into the RH series of dryers.
RH series of non-cycling refrigerant compressed air dryers have been designed to remove water vapor from industrial compressed air that is free of reactive contaminants like ammonia, gaseous acid, dust, rust or any other chemical or mineral products capable of reacting or clogging the heat exchanger. The dryers are designed and recommended for indoor applications.
10
SECTION 2
RH SERIES—HIGH TEMPERATURE
The RH series of Dryers operate without the need for any after-coolers.
11
RH SERIES—HIGH TEMPERATURE
2.4.1 I MPORTANT SAFETY NOTES :
1. When operating the air dryer the operator must employ safe working methods and observe all recommended/local safety instructions and applicable regulations.
2. Prior to installation, the dryer and the compressed air system must be depressurized and disconnected from the electrical main supply.
3. The user is responsible for safe operating conditions. Parts and accessories must be replaced if inspection shows that safe operation cannot be assured.
4. Installation, operation, maintenance and repair are to be performed only by authorized, trained and certified technicians.
5. DO NOT exceed the minimum and maximum values of all the parameters mentioned on the Main data label, Electrical data label and accompanying specification sheets if any.
6. All safety precautions mentioned in this manual must be adhered to at all times and by all personnel working on the dryer
2.4.2 T RANSPORTATION
1. Use care and caution when transporting the dryer. Avoid sudden jerks, tilting, dropping and other physical abuse.
2. A forklift can be used to transport the dryer provided the forks are long enough to support the full width or length. Caution must be used throughout the move.
2.4.3 P OSITIONING
1. The dryer must be installed horizontally. A minimum of at least 1 ½ feet clearance around the dryer is necessary to allow free air circulation and easy access for servicing.
2. The ambient temperature in the room should not exceed 120° F and should not be below 40° F, taking into account the heat radiated by the dryer. (About 18 watts for each SCFM under ISO 7183-5 condition or 40 watt for each liter/sec under ISO 7183-
A condition).
SECTION 2
2.4.4 I NSTALLATION
In addition to the general mechanical construction procedures and local regulations, the following instructions need to be emphasized:
1. Only authorized, trained and skilled engineers should install the compressed air dryer.
2. Safety devices, protecting covers or insulations in the dryer are never to be removed or modified. Each pressure vessel or accessory installed outside the dryer with compressed air (Any pressure above atmospheric pressure) must be fitted with individual pressure relief safety valves.
3. Optional air by-pass valve: Install one (1) air by-pass valve and two (2) switch off valves in the line before the dryer to allow easy maintenance and for possible isolation of the dryer without interrupting the compressed air flow.
4. In Line Filter: install one compressed air filter in line before the dryer to protect it against dirt and possible clogging of heat exchanger.
Contact your Sullair representative/dealer for suitable filter.
2.4.5 S TEPS TO UNDERTAKE BEFORE
OPERATING
1. Read this manual completely.
2. Review all safety precautions.
3. Use recommended pipe sizes as per specifications.
4. Never operate the dryer at pressures above the maximum specified on the dryer label
(check the technical specifications).
12
SECTION 2
2.4.6 M AINTENANCE BY AN E NGINEER /
T ECHNICIAN
1. Maintenance and repairs should only be performed when the air dryer is shut down and depressurized and when the main power switch is turned OFF.
2. Use only the appropriate tools for maintenance and repair.
3. Before dismantling any part that has been pressurized, disconnect the pressure sources and depressurize the system completely. Shut off all valves and isolate the dryer.
4. Proceed carefully during maintenance and repair. Prevent dirt from entering by covering parts and orifices with a clean cloth, paper or tape.
5. Receiver tanks should never be welded or modified in any way.
6. Never leave tools, loose parts or cleaning rags in or on the air dryer.
7. Before connecting the dryer back online, check the setting of the control and safety devices as well as the pressure and the temperature of the compressed air circuit.
RH SERIES—HIGH TEMPERATURE
2.4.7 M AINTENANCE BY THE USER
1. Keep the dryer clean.
2. In case of more than 4 pounds of refrigerant, the dryer should be regularly checked to be leak free by qualified refrigerant engineer. Refer to section “Environmental protection” of this manual.
3.
Every six months — check the correct operation of the condenser drain trap.
Replace timer or solenoid valve in case of clogging or malfunctioning.
4.
Every six months —check and clean the drain strainer or the electronic sensor by undoing the access screw and rinsing the filter with tap water to remove the trapped dirt from the inside.
5. Clean the air condenser with a brush or compressed air as soon as it’s dirty or clogged: Take care not to bend the fins of the condenser heat exchanger.
6. Check the troubleshooting list in case of maintenance issues.
7. Check operating pressures, temperatures and time settings after maintenance. If operating and safety devices function properly, the air dryer may be used.
2.4.8 E NVIRONMENTAL P ROTECTION
1. US/EU laws protect the environment against refrigerant being released into the atmosphere.
2. An annual leak control test at less than 5.0
gr/year should be performed by a qualified engineer if the refrigerant dryer contains more than 4.4 lbs/ 2 kg of refrigerant. This control test has to be done twice a year if the dryer contains more than 66 lbs/30 kg.
3. Prior to dryer disposal, the refrigerant must be properly recovered by a qualified engineer.
13
RH SERIES—HIGH TEMPERATURE SECTION 2
2.4.9 R EFRIGERANT CIRCUIT :
The refrigerant circuit can be divided into 3 parts:
1. Low pressure section with an evaporator
(heat exchanger)
2. High pressure section including: Condenser, liquid receiver, (if installed) and the filter dryer.
3. Control circuit including: Compressor, expansion valve, by-pass valve (if installed), fan pressure switch, safety high pressure switch.
2.4.10 T HE R EFRIGERANT CIRCUIT OPERATES
AS FOLLOWS :
1. The compressor compresses gaseous refrigerant.
2. The hot refrigerant gas condenses in the condenser. Being liquefied, it is stored in the liquid receiver (if existing).
3. The liquid is taken out of the storage receiver vessel and injected into the evaporator (heat exchanger) by an expansion valve. This expansion valve is protected by a filter dryer, that retains particles and humidity that could be in the circuit.
4. The injected liquid fills in the refrigerant section of the Air-Refrigerant heat exchanger and evaporates due to the heat from the incoming air. The gaseous refrigerant is sucked in the compressor and the cycle carries on.
5. In order to keep the evaporation pressure steady, and thus the refrigerant temperature in the heat exchanger, a by-pass valve injects hot gaseous refrigerant into the circuit. On certain dryers, an automatic pressure expansion valve regulates this process.
2.4.11 C OMPRESSED AIR CIRCUIT
1. The hot, saturated, compressed air from the compressor is forced into the air-cooled after-cooler where it is pre-cooled to approximately ambient temperature.
2. This pre-cooled compressed air enters the high-efficiency moisture separator where condensed moisture is stripped from the air stream and purged out via the electronic timer drain.
3. The air then enters the first stage of the heat exchanger (air to air pre-cooler/re-heater) where the outgoing chilled air cools the incoming hot air. This energy saving heat exchanger provides significant advantages, such as a reduction of the heat load imposed on the refrigerant compressor and condenser, re-heating the outlet air, and preventing condensation of moisture in the plant air distribution lines.
4. From the air-to-air heat exchanger, air enters the air-to-refrigerant heat exchanger where further cooling occurs and the air temperature is reduced to the desired pressure dew point (PDP). As the air is cooled, the moisture condenses into a liquid and is then separated in the integrated high efficiency separator and discharged through the condensate drain.
5. The cooled air then re-enters the air-to-air heat exchanger, in a direction opposite to the flow of the warm, saturated incoming air and pre-cools the hot air. During this process the outgoing air is reheated thereby minimizing the chances of moisture condensation in the compressed air distribution lines.
14
SECTION 2 RH SERIES—HIGH TEMPERATURE
2.5.1 C OMPRESSOR T YPE
The High Temperature Inlet Refrigerated compressed air dryers use the sealed Hermetic type of compressors and require no periodic servicing.
2.5.2 C ONDENSER
The air-cooled condenser is equipped with helicoidally fans controlled by a pressure switch the controls the fan cycling in order to maintain the refrigerant high pressure at the correct level.
Air cooled aftercooler is integrated to the condenser.
The fan motor of the air cooled aftercooler is separate and it only starts to function when the inlet air temperature is equal or above 95°F. This is controlled by a thermostatic switch.
2.5.3 R EFRIGERANT CIRCUIT PROTECTION
O VERLOAD PROTECTOR :
The single phase compressors are equipped with an overload protector which is a thermal sensitive switch controlling the temperature of the compressor and overheating. In case of malfunction, the protector trips out. However, it switches on again automatically as soon as the compressor has cooled down.
H IGH PRESSURE SECURITY SWITCH :
Refrigerant circuits are protected against excessive pressure by a security switch that stops the compressor in case of too high a pressure. In case this safety switch has tripped, it has to be manually reset before switching on the dryer.
2.5.4 F ILTER DRYER
In order to keep the refrigerant circuit void of all moisture, a filter drier is used in line. This filter also traps any solid particles that may have migrated in the circuit during operation. To avoid problems, the refrigerant circuit must be vacuumed before filling it with the recommended refrigerant.
2.5.5 R EFRIGERANT CIRCUIT REGULATION
1. The evaporating pressure is kept constant by controlled injection of hot gas from the high-pressure side into the low-pressure section of the circuit through a by-pass valve.
This constant pressure corresponds to a stable evaporating temperature adjusted as close to 32°F as possible.
2. The liquid refrigerant is injected into the evaporator through a thermostatic expansion valve keeping the superheat of the refrigerant constant at the outlet of the evaporator.
3. The mix of hot gas from by-pass valve and cold gas from evaporator is called superheat.
2.5.6 C ONDENSATE DRAIN — TRAP ASSEMBLY
Disassembling the drain is easy because it can be isolated from the air circuit under pressure with a ball valve. The drain has to be isolated before being dismantled.
15
RH SERIES—HIGH TEMPERATURE SECTION 2
2.5.7 C OMPACT 3IN -1 H EAT EXCHANGER
The dryers are equipped with compact heat exchangers. This compact 3-in-1 setup has been specially designed to dry compressed air and is made of the following components:
1. An air-to-air heat exchanger which pre-cools the incoming hot air with the outgoing cold air, thereby saving a significant load on the compressor.
2. An Evaporator which is an air-to- refrigerant heat exchanger that cools the pre-cooled compressed air.
3. An integrated separator that removes all condensates and requires no additional maintenance.
AIR/REF.
WATER SEPARATOR AIR/AIR
REFRIGERANT
GAS OUTLET
REFRIGERANT
GAS INLET
AIR OUTLET
AIR INLET
DRAIN PORT
16
1. Starting of a Single phase dryer for the first time a.
Make sure all air connections are intact and have no leaks b.
Double check wiring connections c.
Set the rocker switch to “I”
2. Daily starting and shut-down a.
Push on the green button to start the dryer.
b.
The start light will indicate that the dryer is running.
3. To stop the dryer, first stop the airflow (either shut-down the air compressor or close the inlet/outlet or by-pass valve). When the air flow is stopped, push the green button to the stop position.
1. Avoid turning OFF the dryer when compressed air is still flowing through it.
2. To switch the already preheated dryer on again, simply push the green start button.
NOTES
17
2.7
ED—RH15-50
02250195-252 R00
2.7
ED—RH15-50
KEY
29
30
31
32
25
26
27
28
21
22
23
24
17
18
19
20
13
14
15
16
9
10
11
12
7
8
5
6
3
4
1
2
PART NUMBER
SEE REF. TABLE
M-CON-0050H
M-FMT-0150-115-1-60-A
M-FAN-0150
M-GRL-0150
M-DRI-0200
M-EXC-0035
TMR-3000
M-SLV-0150-115
M-WSP-050
M-EXV-0075
M-HPS-0200
M-FNS-0200
M-THS-0325
M-THG-0325
M-ONB-0200
M-CFR-0050H
M-CLE-0050H
M-CRI-0050H
M-CRE-0050H
M-CTO-0050H
M-CBA-0050H
M-CBL-0050H
M-HP1-0050H
M-HP2-0050H
M-CTC-3000
M-CPS-3000
M-PDC-0200
M-SCR-3000
M-STU-3000
M-FAS-3000
M-CSC-0050-115-1-60
DESCRIPTION
COMPRESSOR
CONDENSOR
FAN MOTOR
FAN BLADE
FAN GRILL
DRIER DEHYDRATOR
HEAT EXCHANGER
TIMER
SOLENOID VALVE
WATER SEPARATOR
EXPANSION VALVE
HIGH PRESSURE SWITCH
FAN ON/OFF SWITCH
THERMOSTATIC SWITCH
THERMOSTATIC GUAGE
ON/OFF BUTTON
CABINET FRONT
CABINET SIDE-LEFT
CABINET SIDE-RIGHT
CABINET REAR
CABINET TOP
CABINET BASE
CABINET LEG
CABINETHORIZONTAL PROFILE 1
CABINET HORIZONTAL PROFILE 2
CABINET TOP CORNER
CABINET HANDLE
PLASTIC DISPLAY COVER
SCREW TYPE 1
CABINET STUD AND NUT
CABINET FASTENER
COMPRESSOR START CAPACITOR
QTY
24
12
12
1
3
1
2
4
4
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
2
1
2
2
1
1
KEY
33
34
PART NUMBER
SEE REF. TABLE
M-STR-0050-115-1-60
DESCRIPTION
COMPRESSOR OVERLOAD
PROTECTOR
COMPRESSOR START RELAY
QTY
1
2.8
ED—RH75-100
02250195-253 R00
2.8
ED—RH75-100
KEY
29
30
31
32
25
26
27
28
21
22
23
24
17
18
19
20
13
14
15
16
9
10
11
12
7
8
5
6
3
4
1
2
PART NUMBER
SEE REF. TABLE
M-CEB-115-1-60-A
M-CON-100H
M-FMT-0150-115-1-60-A
M-FAN-0200
M-GRL-0200
M-DRI-0200
SEE REF. TABLE
TMR-3000
M-SLV-0150-115
M-WSP-050
M-EXV-0075
M-HPS-0200
M-FNS-0200
M-THS-0325
M-THG-0325
M-ONB-0200
M-CFR-0100H
M-CLE-0100H
M-CRI-0100H
M-CRE-0100H
M-CTO-0100H
M-CBA-0100H
M-CBL-0100H
M-HP1-0100H
M-HP2-0100H
M-CTC-3000
M-CPS-3000
M-PDC-0200
M-SCR-3000
M-STU-3000
M-FAS-3000
DESCRIPTION
COMPRESSOR
COMPRESSOR ELECTRIC BOX
CONDENSOR
FAN MOTOR
FAN BLADE
FAN GRILL
DRIER DEHYDRATOR
HEAT EXCHANGER
TIMER
SOLENOID VALVE
WATER SEPARATOR
EXPANSION VALVE
HIGH PRESSURE SWITCH
FAN ON/OFF SWITCH
THERMOSTATIC SWITCH
THERMOSTATIC GUAGE
ON/OFF BUTTON
CABINET FRONT
CABINET SIDE-LEFT
CABINET SIDE-RIGHT
CABINET REAR
CABINET TOP
CABINET BASE
CABINET LEG
CABINETHORIZONTAL PROFILE 1
CABINET HORIZONTAL PROFILE 2
CABINET TOP CORNER
CABINET HANDLE
PLASTIC DISPLAY COVER
SCREW TYPE 1
CABINET STUD AND NUT
CABINET FASTENER
QTY
1
24
12
12
4
3
2
2
1
4
1
1
1
1
1
1
1
1
1
1
1
1
2
1
1
1
2
2
1
2
1
1
KEY
33
34
35
PART NUMBER
SEE REF. TABLE
SEE REF. TABLE
SEE REF. TABLE
DESCRIPTION
COMPRESSOR START CAPACITOR
COMPRESSOR OVERLOAD
PROTECTOR
COMPRESSOR START RELAY
QTY
1
1
2.9
ID—RH15-50
02250195-252 R00
2.9
ID—RH15-50
DRYER PART NUMBER
02250193-795
02250193-796
02250193-797
02250193-798
WITHOUT PALLET SIZE
17.52” * 17.52” * 37.6”
[445] * [445] * [955]
POWER RATINGS
115V/1Ph/60Hz
115V/1Ph/60Hz
115V/1Ph/60Hz
115V/1Ph/60Hz
WITH PALLETT SIZE
20.08” * 20.08” * 44.68”
[510] * [510] * [1135]
COOLING
AIR COOLED
AIR COOLED
AIR COOLED
AIR COOLED
GROSS
WEIGHT
163 LB
161 LB
159 LB
159 LB
NET
WEIGHT
141 LB
139 LB
137 LB
137 LB
DECAL
RH50
RH35
RH25
RH15
DRYER
RH50
RH35
RH25
RH15
2.10 ID—RH75-100
02250195-253
2.10 ID—RH75-100
DRYER PART NUMBER
02250193-799
02250193-800
POWER RATINGS
115V/1Ph/60Hz
115V/1Ph/60Hz
WITHOUT PALLET SIZE
20.08” * 22.05” * 35.83”
[510] * [625] * [755]
WITH PALLETT SIZE
24.21” * 27.76” * 42.32
[615] * [705] * [1075]
COOLING
AIR COOLED
AIR COOLED
GROSS
WEIGHT
238 LB
217 LB
DECAL
RH75
RH100
NET
WEIGHT
213 LB
193 LB
DRYER
RH100
RH75
2.11 P&I—RH15-75
02250195-284
2.11 ID—RH15-75
6
7
4
5
1
2
3
COMPRESSOR
REFRIGERANT CONDENSER
AFTERCOOLER
FAN MOTOR
FAN MOTOR SWITCH
DEHYDRATOR
THERMOSTATIC EXPANSION VALVE
8
9
EVAPORATOR
AIR-AIR EXCHANGER
10 DEW POINT INDICATOR
NOTE: MARK/TAG COMPONENT/CONTAINER
WITH SULLAIR P/N AND REVISION.
MODEL
RH15
RH25
RH35
RH50
RH75
REFRIGERANT TYPE
R134A
LB
1.102
1.102
1.102
0.992
1.543
2.12 P&I—RH100
02250195-285
2.12 ID—RH75-100
6
7
4
5
1
2
3
COMPRESSOR
REFRIGERANT CONDENSER
AFTERCOOLER
FAN MOTOR
FAN MOTOR SWITCH
DEHYDRATOR
THERMOSTATIC EXPANSION VALVE
8
9
EVAPORATOR
AIR-AIR EXCHANGER
10 DEW POINT INDICATOR
11 LIQUID RECEIVER
12 BY-PASS VALVE
NOTE: MARK/TAG COMPONENT/CONTAINER WITH
SULLAIR P/N AND REVISION.
REFRIGERANT TYPE: R134A (2.435 lb)
2.13 WIRING DIAGRAM
02250195-303 R00
2.13 WIRING DIAGRAM
COMP DESCRIPTION
A40 Compressor starting capacitor
K01 Compressor motor start relay
A20-1 Electronic drain power supply-1
A20-2 Electronic drain power supply-2
M01 Compressor motor
M10-1 Fan motor 1
M10-2 Fan motor 2
S01 Main switch
S10 Fan pressure switch
S11 High pressure safety switch
S21 High air temperature thermostat
P Compressor protection
HP
TH
Indicates high pressure
Indicates high temperature in the circuit
RH SERIES—HIGH TEMPERATURE
Before starting maintenance activity or repair on the dryer, the main power switch and ON/
OFF switch must be turned OFF. Also, the compressed air must be vented from the system and the inlet and outlet valves must be closed. The dryer has to be isolated completely.
SECTION 2
PROBLEM
Dryer-on light is lit but refrigerant compressor is not operating cont.
POSSIBLE CAUSE
Refrigeration unit is not operating
REPAIR
Check refrigeration compressor
The refrigerant high pressure protection has tripped
The refrigerant safety high pressure switch has tripped
Excessive ambient temperature
Excessive temperature on crankcase of compressor
Excessive compressed air inlet temperature
Ensure that dryer inlet conditions are within the recommended range.
Designed conditions and correction factors are described in product literature.
Allow time for the compressor to cool down
Reason may be a possible incorrect adjustment or shortage of refrigerant
Be sure that dryer inlet conditions are within the specified range.
COMMENTS
Several factors may cause compressor failure.
A qualified refrigeration contractor should check all electrical and refrigerant control
The dryer is protected against a very high refrigerant pressure. It will trip in case the condenser efficiency is reduced
Manually reset the switch (green button)
A high ambient temperature may cause the refrigerant system to operate at higher than normal pressures.
Results will be a higher than normal evaporator temperature.
Important: there should be adequate air circulation around the dryer, and proper ventilation in the equipment room is a must to achieve a low enough ambient temperature
Compressor is protected against too high a temperature of the crankcase by a thermal switch called “klixon”
Klixon can be located internally to refrigerant compressor or under the protective cover on the top of the compressor
The dryer is designed for working within calculated maximum conditions.
Should these conditions change, the dryer can be overloaded, the dew point will go up and protecting devices can switch off
32
SECTION 2 RH SERIES—HIGH TEMPERATURE
PROBLEM
Dryer-on light is lit but refrigerant compressor is not operating
Dryer-ON light is lit but refrigerant compressor does not run
Dryer-on light is lit but fan does not come ON
Dryer on light is lit but fan motor of aftercooler does not run
When compressor starts, it vibrates a lot and makes mechanical noise
POSSIBLE CAUSE
Too much air flow
Faulty electrical wiring
One electrical protection has tripped
Compressor is sucking liquid refrigerant at start up.
REPAIR
Clogged condenser fins Clear fins of all obstructions
Check actual flow through the dryer
Inspect the circuit
Reset the protection or replace the blown fuse
Fan has to run if refrigerant high pressure has reached upper set point
Inlet air temperature may be too low
Check the compressed air flows through the dryer. Check to make sure that the fan blades are free to rotate.
Increase the inlet air temperature
Be sure that pre-heating period of minimum 4 hours has elapsed for dryers equipped with crankcase heater (all models equal to and larger than 250CFM)
COMMENTS
The clogged fins in the condenser will restrict the air passage and reduce the refrigeration capacity, causing high temperature in the evaporator.
Air condensers should be periodically checked and cleaned.
This dryer is designed for a maximum air flow. If too much air is pumped into the dryer, water removal capacity decreases, resulting in liquid carryover downstream. Check the rated output of the air compressor and make sure that it matches the dryer capacity.
The compressor-on light should be wired into the refrigerant compressor circuit.
Refer to the electrical and wiring diagram for proper connections.
The dryer is protected by a fuse and/ or overload relay that can trip.
Reset or replace blown fuse once, but do not insist if it trips again. Instead have a qualified refrigerant technician check the complete dryer thoroughly.
Fan is automatically turned ON/OFF in order to keep the refrigerant pressure to a minimum value. The fans might stop if the pressure setting is incorrect
The fan motor of the aftercooler is designed to run if the inlet air temperature is equal or greater then 95F. In case it is less then that temperature then the fan motor of the aftercooler does not start to run.
Refrigerant may move between the receiver when refrigerant compressor is stopped and not heated, especially if it has been non-operational for a long time
This migration may cause liquid shock in valves specially on dryers containing more refrigerant
33
RH SERIES—HIGH TEMPERATURE
PROBLEM
Water in system
SECTION 2
POSSIBLE CAUSE
Inlet and outlet connections are reversed
Drain system is clogged or inoperative
Bypass system is open
Free moisture remains in pipe lines
Excessive free moisture
Excessive compressed air inlet temperature
REPAIR
Check inlet and outlet connections
Restore free flow of water condensate.
Check water evacuation points and connections.
Check the valves
Blow out the system
Check the separator and drain system ahead of the dryer
Be sure that the dryer is working well within the maximum operating conditions
COMMENTS
This dryer is designed for air flow in one direction only.
Inlet and outlet directions are identified on the dryer and cannot be interchanged.
The attached drain may be timer and solenoid valve type or pneumatically assisted.
Timer has to be adjusted in accordance with values listed in the manual and depending on the amount of moisture in the air stream.
Solenoid valves includes a strainer that has to be periodically checked and cleaned.
Membranes of pneumatically assisted drains have to be checked or replaced every 6 months
Important: Bypass piping should be installed around the dryer so the dryer can be isolated for service without shutting down the air supply.
During dryer operation, valves must be set so all air goes into the system.
Check tightness of the bypass system
Before the dryer is placed inline, blow out all the moisture from the system and from the compressed air piping.
In some systems there may be an accumulation of free moisture in the line ahead of the dryer.
If this moisture is pumped into the dryer intermittently, the water removal capacity may not be sufficient.
A water separator has to be installed into the line before the dryer
The dryer is designed for working into calculated maximum conditions.
Should the conditions be exceeded, the dryer will be overflowed, dew point will go up and protecting devices can switch off
34
SECTION 2
PROBLEM
Water in system
High pressure drop
RH SERIES—HIGH TEMPERATURE
POSSIBLE CAUSE
Clogged condenser fins Clean fins of all obstruc-
Shortage of refrigerant
Refrigeration system is not functioning
Excessive pressure dew point
Excessive compressed air flow or too low air inlet pressure
Freeze up
REPAIR tions
Fix the leak and add a charge of refrigerant
Double check if the refrigerant compressor is running
Readjust refrigerant evaporating pressure
Check actual pressure and flow through the dryer
Ensure that the operating room temperature is above 41°F/5°C
Readjust refrigeration controls
Clogged heat exchanger Clean heat exchanger with a reverse air flow
COMMENTS
The clogged fins in the condenser will restrict air passage and reduce refrigerant capacity causing water downstream.
Fins should be periodically checked and cleaned
Loss of refrigerant will cause improper functioning.
A qualified refrigeration specialist should perform the necessary repairs, or factory should be contacted if the units is in warranty
To check if the compressor is running, check compressor-on light.
It is possible for the fan to be operating but not the compressor.
Compressor not running can be caused by several factors. A qualified refrigerant technician should check all refrigerant and electrical controls
The refrigerant pressure adjustment valve is identified by a label.
Turning the adjustment screw counterclockwise will decrease the refrigerant pressure and lower the dew point.
Adjust valves in ¼ turn increments to allow 15 minutes for pressure stabilization with full air flowing. Be sure that gauge indicates that pressure stays in green zone
This dryer is designed for a maximum air flow. If too much air is pumped into the dryer, water removal capacity may not be sufficient, resulting in liquid carryover downstream. Check the rated output of the air compressor
Frosting of the lines is an indication that controls are set too low.
Controls may be adjusted in the field by means of the hot gas bypass valve.
Turn the screw clockwise to increase refrigerant pressure setting which will increase pressure dew point.
Turn screw in ¼ turn increments until frost disappears. Allow 15 minutes for pressure stabilization with air flowing
Dryers are supposed to be used with compressed air free of any aggressive contaminants. Some contaminants and impurities may require a special heat exchanger. Contact your dealer with your application details.
35
RH SERIES—HIGH TEMPERATURE SECTION 2
PROBLEM
The unit will not run or cycles ON and OFF
POSSIBLE CAUSE
Line disconnect switch is open.
Faulty refrigerant compressor or controls
Excessive compressed air inlet temperature
Excessive ambient temperature
Clogged condenser fins
Shortage of refrigerant
REPAIR
Close the start or disconnect switch
Determine the cause and make correction
Designed conditions and correction factors as described in the product literature must be strictly followed. Ensure that the dryer is working well within the maximum conditions
Designed conditions and correction factors as described in the product literature must be strictly followed. Ensure that the dryer is working well within the maximum conditions
Clear fins of all obstructions
Fix the leak and add the appropriate amount of refrigerant into the system.
COMMENTS
If the dryer is not operating, check the disconnect switch or circuit breaker to be certain it is turned ON.
Failure of compressor to run may be caused by several factors.
A qualified refrigeration technician should check all electrical and refrigeration controls, or the factory should be contacted if the unit is under warranty
The dryer is designed for working within the calculated maximum conditions.
Should the conditions be exceed, the dryer will be overflow, dew point will go up and protecting devices can get switched off
A high ambient temperature may cause the refrigerant system to operate at higher than normal pressures.
Result will be a higher than normal evaporator temperature.
Important: there should be adequate air circulation around the dryer, and proper ventilation in the equipment room. This should guarantee a low enough ambient temperature
The clogged fins in the condenser will restrict the air passage and reduce the refrigeration capacity, causing high temperature in the evaporator.
Fins should be periodically checked and cleaned
Loss of refrigerant will cause improper functioning.
A qualified refrigeration specialist should perform the necessary repairs, or factory should be contacted if the unit is under warranty
36
2.15 SETTINGS
MODEL
Return Gas
Temperature
Evaporating pressure
C°
RH-0015 5-10°C
RH-0025 5-10°C
RH-0035 5-10°C
RH-0050 5-10°C
RH-0075 5-10°C
RH-0100 5-10°C
F° BAR PSI
41-50°F 2.05 bar 29.7 psi
41-50°F 2.05 bar 29.7 psi
41-50°F 2.05 bar 29.7 psi
41-50°F 2.05 bar 29.7 psi
41-50°F 2.05 bar 29.7 psi
41-50°F 2.05 bar 29.7 psi
Fan pressure switch
BAR
9-12 bar
9-12 bar
9-12 bar
9-12 bar
9-12 bar
9-12 bar
Security high pressure switch
Security low pressure switch
Refrigerant temperature switch
Drain timer
Water flow valve
(if water condenser)
PSI
130.5-174 psi
130.5-174 psi
130.5-174 psi
130.5-174 psi
130.5-174 psi
130.5-174 psi
BAR PSI BAR PSI
25 bar 363 psi 1.6 bar 23.2 psi
25 bar 363 psi 1.6 bar 23.2 psi
25 bar 363 psi 1.6 bar 23.2 psi
25 bar 363 psi 1.6 bar 23.2 psi
25 bar 363 psi 1.6 bar 23.2 psi
25 bar 363 psi 1.6 bar 23.2 psi
C°
N/A
N/A
N/A
N/A
N/A
N/A
F°
N/A
N/A
N/A
N/A
N/A
N/A
Open / Close BAR
4 sec / 5 min N/A
4 sec / 5 min
4 sec / 5 min
4 sec / 5 min
4 sec / 5 min
4 sec / 5 min
N/A
N/A
N/A
N/A
N/A
PSI
N/A
N/A
N/A
N/A
N/A
N/A
Table 2-1: DP Power 60H
GROUP
STANDARD
VOLTAGE
Capacity SCFM @
Rated Conditions
AIR COOLED MODEL REF SULLAIR PART
WATER COOLED
MODEL REF
SULLAIR PART
Rated
Flow [1]
Pressure
Drop
Absorbed
Power
Port Size
High Temp
High Temp
High Temp
High Temp
High Temp
High Temp
115/1/60
115/1/60
115/1/60
115/1/60
115/1/60
115/1/60
15.0
25.0
35.0
50.0
75.0
100.0
RH-0015-115-60-A
RH-0025-115-60-A
RH-0035-115-60-A
RH-0050-115-60-A
RH-0075-115-60-A
RH-0100-115-60-A
02250193-795
02250193-796
02250193-797
02250193-798
02250193-799
02250193-800 n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a scfm
15.0
25.0
35.0
50.0
75.0
100.0
(psid)
1.1
2.2
3.6
6.0
2.9
5.3
(kW)
0.25
0.29
0.45
0.67
0.85
1.11
(in)
1/2”
1/2”
1/2”
1/2”
3/4”
3/4”
2.16 SPARE PARTS
Component Name
Refrigerant Gas compressor compressor electric box
Condenser
Fan motor
Fan Blade fan grill
Drier-Dehydrator
Heat Exchanger
Evaporator (water Heat
Exchanger)
Flexible steel tube (inlet)
Flexible steel tube (outlet)
Expansion valve
By-pass valve separator
Liquid Receiver
High Pressure Security switch
Fan on/off switch
Low pressure switch
Thermostatic switch
Water pressure Switch
Water pressure switch timer
Water pump contactor
Water pump
Water Tank
Water Gauge
Microprosessor
Fan Overload Protector
Compressor Overload
Protector
Thermostatic Gauge
RH-0015-115-1-60-A
R134a
M-CMP-0050-115-1-60-A
N/A
M-CON-0050H
2x M-FMT-0150-115-1-60
2 x M-FAN-0150
2 x M-GRL-0150
M-DRI-0200
M-EXC-0035
N/A
N/A
N/A
M-EXV-0075
N/A
N/A
N/A
M-HPS-0200
M-FNS-0200
N/A
M-THS-0325
N/A
N/A
N/A
N/A
N/A
N/A
N/A
M-FOP-3000
M-COP-0050-115-1-60-A
M-THG-0325
RH-0025-115-1-60-A
R134a
M-CMP-0050-115-1-60-A
N/A
M-CON-0050H
2x M-FMT-0150-115-1-60
2 x M-FAN-0150
2 x M-GRL-0150
M-DRI-0200
M-EXC-0035
N/A
N/A
N/A
M-EXV-0075
N/A
N/A
N/A
M-HPS-0200
M-FNS-0200
N/A
M-THS-0325
N/A
N/A
N/A
N/A
N/A
N/A
N/A
M-FOP-3000
M-COP-0050-115-1-60-A
M-THG-0325
RH-0035-115-1-60-A
R134a
M-CMP-0050-115-1-60-A
N/A
M-CON-0050H
2x M-FMT-0150-115-1-60
2 x M-FAN-0150
2 x M-GRL-0150
M-DRI-0200
M-EXC-0050
N/A
N/A
N/A
M-EXV-0075
N/A
N/A
N/A
M-HPS-0200
M-FNS-0200
N/A
M-THS-0325
N/A
N/A
N/A
N/A
N/A
N/A
N/A
M-FOP-3000
M-COP-0050-115-1-60-A
M-THG-0325
RH-0050-115-1-60-A
R134a
M-CMP-0075-115-1-60-A
N/A
M-CON-0050H
2x M-FMT-0150-115-1-60
2 x M-FAN-0150
2 x M-GRL-0150
M-DRI-0200
M-EXC-0050
N/A
N/A
N/A
M-EXV-0075
N/A
N/A
N/A
M-HPS-0200
M-FNS-0200
N/A
M-THS-0325
N/A
N/A
N/A
N/A
N/A
N/A
N/A
M-FOP-3000
M-COP-0075-115-1-60-A
M-THG-0325
RH-0075-115-1-60-A
R134a
M-CMP-0075-115-1-60-A
N/A
M-CON-0100H
2x M-FMT-0150-115-1-60
2 x M-FAN-0200
2 x M-GRL-0200
M-DRI-0200
M-EXC-0075
N/A
N/A
N/A
M-EXV-0075
N/A
N/A
N/A
M-HPS-0200
M-FNS-0200
N/A
M-THS-0325
N/A
N/A
N/A
N/A
N/A
N/A
N/A
M-FOP-3000
M-COP-0075-115-1-60-A
M-THG-0325
RH-0100-115-1-60-A
R134a
CAE4461Y/115V
M-CEB-0100-115-1-60
M-CON-0100H
2x M-FMT-0150-115-1-60
2 x M-FAN-0200
2 x M-GRL-0200
M-DRI-0200
M-EXC-0125
N/A
N/A
N/A
M-EXV-0075
N/A
N/A
N/A
M-HPS-0200
M-FNS-0200
N/A
M-THS-0325
N/A
N/A
N/A
N/A
N/A
N/A
N/A
M-FOP-3000
CAE4461Y/115V
M-THG-0325
Component Name RH-0015-115-1-60-A
Main Switch
Contactor
Phase protection relay
Fan Contactor
Transformer
Secondary contact
Timer
Solenoid Valve
Membrane valve
Membrane
Water Separator
Cabinet Front
Cabinet Side - Left
Cabinet Side - Right
Cabinet Rear
Cabinet Top
Cabinet Base
Cabinette fastener
Cabinette Stud and Nut
Cabinet handle
Plastic Display cover
Cabinet Top Corners
Screws
Cage Nuts
Cabinet Legs
Cabinet Frame Top
Cabinette Horizontal profile 1
Cabinette Horizontal profile 2
N/A
N/A
N/A
N/A
N/A
N/A
2 x M-TMR-3000
M-SLV-0150-115
N/A
N/A
M-WSP-0050
M-CFR-0050H
M-CLE-0050H
M-CRI-0050H
M-CRE-0050H
M-CTO-0050H
M-CBA-0050H
M-FAS-1000
M-STU-1000
M-CPS-1000
M-PDC-0200
M-CTC-1000
M-SCR-1000
M-NUT-1000
M-CBL-0050H
M-FRT-0050H
M-HP1-0050H
M-HP2-0050H
RH-0025-115-1-60-A
N/A
N/A
N/A
N/A
N/A
N/A
2 x M-TMR-3000
M-SLV-0150-115
N/A
N/A
M-WSP-0050
M-CFR-0050H
M-CLE-0050H
M-CRI-0050H
M-CRE-0050H
M-CTO-0050H
M-CBA-0050H
M-FAS-1000
M-STU-1000
M-CPS-1000
M-PDC-0200
M-CTC-1000
M-SCR-1000
M-NUT-1000
M-CBL-0050H
M-FRT-0050H
M-HP1-0050H
M-HP2-0050H
RH-0035-115-1-60-A
N/A
N/A
N/A
N/A
N/A
N/A
2 x M-TMR-3000
M-SLV-0150-115
N/A
N/A
M-WSP-0050
M-CFR-0050H
M-CLE-0050H
M-CRI-0050H
M-CRE-0050H
M-CTO-0050H
M-CBA-0050H
M-FAS-1000
M-STU-1000
M-CPS-1000
M-PDC-0200
M-CTC-1000
M-SCR-1000
M-NUT-1000
M-CBL-0050H
M-FRT-0050H
M-HP1-0050H
M-HP2-0050H
RH-0050-115-1-60-A
N/A
N/A
N/A
N/A
N/A
N/A
2 x M-TMR-3000
M-SLV-0150-115
N/A
N/A
M-WSP-0050
M-CFR-0050H
M-CLE-0050H
M-CRI-0050H
M-CRE-0050H
M-CTO-0050H
M-CBA-0050H
M-FAS-1000
M-STU-1000
M-CPS-1000
M-PDC-0200
M-CTC-1000
M-SCR-1000
M-NUT-1000
M-CBL-0050H
M-FRT-0050H
M-HP1-0050H
M-HP2-0050H
RH-0075-115-1-60-A
N/A
N/A
N/A
N/A
N/A
N/A
2 x M-TMR-3000
M-SLV-0150-115
N/A
N/A
M-WSP-0050
M-CFR-0100H
M-CLE-0100H
M-CRI-0100H
M-CRE-0100H
M-CTO-0100H
M-CBA-0100H
M-FAS-1000
M-STU-1000
M-CPS-1000
M-PDC-0200
M-CTC-1000
M-SCR-1000
M-NUT-1000
M-CBL-0100H
M-FRT-0100H
M-HP1-0100H
M-HP2-0100H
RH-0100-115-1-60-A
N/A
N/A
N/A
N/A
N/A
N/A
2 x M-TMR-3000
M-SLV-0150-115
N/A
N/A
M-WSP-0050
M-CFR-0100H
M-CLE-0100H
M-CRI-0100H
M-CRE-0100H
M-CTO-0100H
M-CBA-0100H
M-FAS-1000
M-STU-1000
M-CPS-1000
M-PDC-0200
M-CTC-1000
M-SCR-1000
M-NUT-1000
M-CBL-0100H
M-FRT-0100H
M-HP1-0100H
M-HP2-0100H
NOTES
40
PRODUCT USER MANUAL
The Sullair Non-cycling Refrigerated air dryers are designed for constant full load operation. They use specially designed heat exchangers with integrated components to provide consistent dewpoint and trouble-free service for years to come.
The dryers remove the moisture, oil vapors and other harmful contaminants from the compressed air stream. By using basic refrigeration, the hot saturated air is cooled in the highly efficient heatexchangers and the moisture is condensed and removed. Additional filtration eliminates other contaminants and particles.
Water (moisture) is one of the greatest enemies of air tools and piping. Left untreated in the compressed air stream, this moisture will deteriorate the tools, equipment and piping with corrosion, pipe scaling, freezing and a host of other problems that will diminish the life of your entire compressed air system. With a Sullair refrigerant dryer, you can be assured of clean, dry air with consistent dewpoint between 36-40°F. The unique three-in-one heat exchanger combination—
• Air to Air (pre-cooler/re-heater Heat Exchanger)
• Air to Refrigerant (high efficiency Heat
Exchanger)
• Integrated Separator (located at the coldest point to maximize moisture extraction) heats up the exiting air, thereby eliminating the chances of freezing even in relatively cooler ambient conditions. Warm dry air will not affect the piping nor the tools and the result is extended tool life. In addition, applications that require clean dry air can rely upon Sullair’s non-cycling refrigerated air dryers to provide dry air at full load continuously.
Pay attention to the Minimum and Maximum operating conditions before installing and operating the dryer.
Normal Operating Pressure
Normal Operating Temperature
Normal Ambient Temperature
Maximum Operating Pressure
Minimum Operating Pressure
Maximum Ambient Temperature
Minimum Ambient Temperature
Maximum Operating Temperature
100 PSIG
100°F
100°F
230 PSIG
75 PSIG
120°F
40°F
150°F
If your application does not match the above criteria, contact your Sullair distributor and they will be able to provide the right dryer for your application.
41
PRODUCT USER MANUAL
S AFETY R EGULATIONS :
1. When operating the air dryer, the operator must adopt safe working methods and observe all local safety instructions and relevant regulations.
2. Prior to installation, the dryer and the compressed air system are to be depressurized and disconnected from the electrical main supply.
3. The user is responsible for safe operating conditions. Parts and accessories must be replaced if inspection shows that it is unsafe to operate the dryer.
4. Installation, operation, maintenance and repair are only to be performed by authorized, trained and skilled technicians.
5. The minimum and maximum values listed on the data label must be strictly followed. If your application does not fall within the parameters indicated on the data label–
STOP . Contact your Sullair representative/ distributor and clarify the issue before proceeding or operating the dryer.
6. All safety procedures and practices mentioned in this manual must be observed, as well as all of the federal, state and local safety precautions.
7. If any statement in this manual does not comply with the local legislation, the strongest standard is to be applied.
1. Any structural changes made to the dryer without the advise of Sullair or Sullair representatives will void all warranty.
2. Compressed air from this dryer does not meet the OSHA standards for breathing and hence it should not be used for breathing purposes.
None of the protective alarms, equipment or devices should be tampered with. These protective items have been designed and installed on this dryer for your safety.
SECTION 3
3. Do not operate the dryer at pressures, temperatures of flow other than the ones mentioned on the data label.
Sullair dryers are factory tested prior to shipment.
However, during shipment, there are chances that the dryer was mishandled or certain parts were broken or might have come loose. In order to ensure that the dryer you have received is fit for installation and operation, we recommend you take a few minutes to inspect the dryer for any physical abuse or damage during shipment.
If you notice any damage to the shipment, we recommend you take the following steps to ensure proper arrangements can be made to address the issue.
1. Immediately file a complaint with the shipping company.
2. Contact Sullair or Sullair distributor and inform them of the damage. (Email or fax the copy of the shipper claim and acknowledgement)
If there is no physical damage to the dryer –
1. Remove all the crating and packaging.
2. Inspect the dryer for electrical and piping connection and make sure that they are all tight.
3. Check the data label, your packing slip and make sure that it is the correct unit you had ordered.
4. Follow the recommended safety procedures and get the dryer ready for installation.
1. Use care and caution when transporting the dryer. Avoid sudden jerks, tilting, dropping and other physical abuse.
2. A forklift can be used to transport the dryer provided the forks are long enough to support the full width or length. Caution must be used throughout the move.
42
SECTION 3 PRODUCT USER MANUAL
1. The dryer must be installed horizontally. A minimum of at least 1 ½ feet clearance around the dryer is necessary to allow free air circulation and easy access for servicing.
2. The ambient temperature in the room should not exceed 120° F and should not be below 40° F, taking into account the heat radiated by the dryer. (About 18 watts for each SCFM under ISO 7183-5 condition or 40 watt for each liter/sec under ISO 7183-
A condition).
1. US/EU laws protect the environment against refrigerant being released into the atmosphere.
2. An annual leak control test at less than 5.0
gr/year should be performed by a qualified engineer if the refrigerant dryer contains more than 4.4 lbs/ 2 kg of refrigerant. This control test has to be done twice a year if the dryer contains more than 66 lbs/30 kg.
3. Prior to dryer disposal, the refrigerant must be properly recovered by a qualified engineer.
This refrigerated compressed air dryer has been designed to remove water vapor from industrial compressed air that is free of any aggressive contaminants like ammonia, gaseous acid, dust, rust, liquid condensate, any other chemical or mineral substances capable of attacking or clogging the heat exchanger(s).
The optional, water-cooled condenser is not designed for use with seawater or water containing aggressive contaminants.
Please contact your factory representative for further questions on this issue. This dryer has been designed for indoor operation only.
The minimum and maximum values stated must be observed, as well as the safety precautions described in this manual.
3.10.1 R EFRIGERANT COMPRESSOR
The refrigerant compressor is fully hermetically sealed and requires no maintenance.
3.10.2 C ONDENSER
1. Air cooled models: The refrigerant condenser is equipped with fans that are cycled on and off to maintain a minimum high side pressure.
2. Water-cooled dryers Utilize a water control valve piloted by a sensing bulb that reacts to the high side refrigerant pressure controlling the water flow Maintain a minimum high side pressure.
3.10.3 R EFRIGERANT CIRCUIT PROTECTION
1.
Overload protector :
Single phase compressors are equipped with an overload protector which is a current/ temperature switch that reacts to the motor winding amps and temperature of the compressor motor. When the switch detects a high current or a high temperature condition with the compressor motor it opens causing loss of voltage to the compressor. This switch automatically resets as the motor cools down to a factory preset temperature.
This cool down period can take as long as 8 hours. A warning lamp will light to indicate that the protector has tripped.
2.
High/Low pressure safety switch :
Refrigerant circuits are protected against excessive pressure by a safety switch that stops the compressor in cases of high or low refrigerant pressure. If this safety switch has tripped out on high refrigerant pressure, it has to be manually reset before the dryer can be restarted. A low pressure trip will automatically reset.
3.10.4 F ILTER D RIER
Total water removal in the refrigerant circuit is achieved by a filter drier who also traps any solid particles that may have migrated into the circuit during assembly.
43
PRODUCT USER MANUAL SECTION 3
3.10.5 C RANKCASE HEATER
3-Phase dryers are equipped with an electric crankcase heater. The heater provides preliminary pre-heating of the refrigerant compressor to evaporate liquid refrigerant possibly condensed in the crankcase. This will prevent liquid shock that can damage the compressor.
3.10.6 R EFRIGERANT CIRCUIT REGULATION IN
RN-0005 TO RN-0050 M ODELS
The liquid refrigerant is injected into the evaporator by a metering device while maintaining the refrigerant in the evaporator at a constant pressure.
This constant pressure corresponds to a stable evaporation temperature adjusted as close to 32°F as possible.
3.10.7 R EFRIGERANT CIRCUIT REGULATION IN
RN-0075 – RD-6000
1. The liquid refrigerant is injected into the evaporator through a metering device trying to maintain the refrigerant in the evaporator at a constant pressure
2. The evaporating pressure is kept constant by a controlled injection of hot gas from the high-pressure side into the low-pressure section of the circuit through a hot gas bypass valve. This constant pressure corresponds to a stable evaporating temperature adjusted as close to 32°F as possible.
3. The mixture of hot gas from the by-pass valve and cold gas from the evaporator is called superheat and is adjusted at (50 ± 5)
°F.
3.10.8 C ONDENSATE DRAIN — TRAP
ASSEMBLY
Dismantling the drain is easy because it can be isolated from the air circuit under pressure with a ball valve. Always isolate the drain before disassembly.
3.10.9 D RAIN MAINTENANCE
Ball Valve isolation option is available only in dryers with capacity 35 CFM and above. For dryers with capacities less than 35 CFM, the unit must be completely depressurized before any attempt is made to clean the condensate separator and the drain trap.
3.10.10 H EAT EXCHANGER , MODULAR DESIGN
The dryers are equipped with compact, modular design heat exchangers. This assembly has been specially designed to dry compressed air and consists of:
1. An air/air heat exchanger which pre-cools the entering hot air with the exiting chilled air.
2. An evaporator which is an air/refrigerant heat exchanger which cools down the compressed air
3. An integral separator that separates the moisture from the air stream at the coldest point. Maximum condensation of moisture occurs at the coldest point and it is at that exact junction that the moisture is removed and drained.
3.10.11 D EW P OINT I NDICATOR
The Dew point indicator is a standard on all dryer models and is located in the control panel and provides a reading of the pressure dew point (PDP)
3.10.12 T EMPERATURE S WITCH —
RD400 AND U P
Located inside the dryer, this optional temperature switch is adjustable from 32~95°F (0 ~35°C).
3.10.13 M ICROPROCESSOR DEVICE
This device is supplied on models equal and greater than RD400 3 phase dryers. The Microprocessor allows the dryer to save energy when there is no flow in the dryer. It is possible to monitor major dryer failures on the Microprocessor. It allows the operators to monitor the following:
• Evaporation temperature
• Inlet air temperature
• Ambient temperature
• Refrigerant gas high and low temperatures
• Fan is working properly
• Compressor is working properly
• Condenser is blocked
• Power Phases are correctly connected
• Drain function
• Total working hours
• Total economy hours
• Real date and time
Microprocessor can be remotely controlled and any alarm contacts can be connected to any external devices.
44
SECTION 3
The refrigerant circuit can be divided in 3 parts:
1. Low pressure section with an evaporator
(heat exchanger)
2. High pressure section including: Condenser, liquid receiver, (if installed) and the filter dryer.
3. Control circuit including: Compressor, metering device, hot gas by-pass valve (if installed), fan pressure switch, safety high/ low pressure switch. Water cooled dryers are equipped with a water flow control valve.Refrigeration Heat Exchanger
4. The compressor compresses gaseous refrigerant.
5. The hot refrigerant gas condenses in the condenser and once liquefied it passes through the liquid receiver (optional)
6. The liquid refrigerant leaves the liquid receiver and is injected into the evaporator
(heat exchanger) by a metering device.
7. This metering device is protected by a filter dryer, that retains particles and humidity that could be in the circuit
8. The injected liquid evaporates (changes states from liquid to gas) by absorbing heat from the compressed air. The gaseous
PRODUCT USER MANUAL refrigerant is sucked into the compressor and the cycle carries on.
9. In order to keep the evaporation pressure steady, and maintain the refrigerant temperature in the heat exchanger, a hot gas by-pass valve injects hot gaseous refrigerant into the low pressure refrigerant circuit.
1. The saturated, hot compressed air flows into the air/air heat exchanger where it is pre cooled by the out going chilled air.
2. The compressed air then enters the evaporator where it is cooled to the desired dew point.
3. The cooled compressed air passes through the air/water separator where the liquid condensate is removed by the centrifugal separation and drained away by the automatic trap. The outgoing, chilled air is then warmed up in the air/air heat exchanger by the hot incoming air. This energy efficient air-to-air heat exchanger significantly reduces the load on the compressor.
4. As long as the compressed air temperature does not drop below dew point, there will be no further condensation in the compressed air piping.
45
PRODUCT USER MANUAL SECTION 3
Figure 3-1: Typical Installation Diagram
Refer to Product Models and Specifications—
,
.
The owner shall furnish all labor, materials, equipment and services necessary for and reasonabaly incidental to complete the installation of all electrical as shown on the drawings.
The electrical installation and connection shall be made in strict accordance with the requirements of any and all City, County, State or Federal codes of
Law having jurisdiction, the requirements and recommendations of the Board of Fire Underwriters, including all amendments and / or additions to the said codes, laws, requirements, and recommendations, the requirements and recommendations of the local utility, the Owner, and the Standard Building Code.
The installer shall obtain all permits and inspections required for the work, and shall pay all costs and fees thereof.
Verify that the operating parameters match with the nominal values stated on the data nameplate of the dryer (voltage, frequency, air pressure, air temperature, ambient temperature, etc.).
This dryer has been thoroughly tested, packaged and inspected prior to shipment. Nevertheless, the unit could be damaged during transportation, check the integrity of the dryer during first start-up and monitor operation during the first hours of operation
Qualified personnel must perform the first start-up.
When installing and operating this equipment, comply with all National Electrical Code and any applicable federal, state and local codes.
Who is operating the unit is responsible for the proper and safe operation of the dryer.
Never operate equipment with panels removed.
46
SECTION 3 PRODUCT USER MANUAL
In addition to the general mechanical construction procedures and local regulations, the following instructions need to be emphasized:
1. Only authorized, trained and skilled engineers should install the compressed air dryer.
2. Safety devices, protecting covers or insulations in the dryer are never to be removed or modified. Each pressure vessel or accessory installed outside the dryer with compressed air (Any pressure above atmospheric pressure) must be fitted with individual pressure relief safety valves.
3. Need to add electrical specifications. Such as wire size, fuse size, breaker sizing, specify which models are single phase and which models are three phase.
4. Install one (1) air by-pass valve and two (2) switch off valves in the line before the dryer to allow easy maintenance and for possible isolation of the dryer without interrupting the compressed air flow.
5. In Line Filters: install one compressed air filter in line (particulate filter) before the dryer to protect it against dirt and possible clogging of heat exchanger. Install an After-filter
(coalescing filter) that can act as a backup during short periods when the by-pass valve is open to perform maintenance on the dryer.
Contact your Sullair representative/dealer for suitable filters.
6. Water Filter: For dryers with water cooled condensers, a water filter should be installed in the supply water piping. (Water Cooled
Units Only)
7. The interconnecting piping must be of the correct size and match that of the dryer Inlet and Outlet pipe sizes. DO NOT use pipes of lesser diameter as this will lead to additional pressure loss and will affect the performance of your air dryer. If you are in doubt, contact your Sullair distributor. It is recommended to use the same pipe size as that of the dryer
Inlet and Outlet.
47
PRODUCT USER MANUAL SECTION 3
1. Read this manual completely.
2. Review all safety precautions.
3. Use recommended pipe sizes as per specifications.
4. DO NOT operate the dryer at pressures above the maximum specified on the dryer label (check the technical specifications).
5. DO NOT operate the dryer in temperatures above 120°F (50°C) degrees
6. DO NOT operate the dryer with inlet air temperatures above 150°F (38°C).
This procedure should be followed on first start-up, after periods of extended shutdown or following maintenance procedures. Qualified personnel must perform the start-up.
S EQUENCE OF OPERATIONS
1. Ensure that all the steps of the “Installation” chapter have been observed.
2. Ensure that the connection to the compressed air system is correct and that the piping is suitably fixed and supported.
3. Ensure that the condensate drain pipe is properly fastened and connected to a collection system.
4. Ensure that the by-pass system (if installed) is closed and the dryer is isolated.
5. Ensure that the manual valve of the condensate drain circuit is open.
6. Remove any packaging and other material which could obstruct the area around the dryer.
7. Activate the mains switch.
8. Turn on the main switch - pos. 1 on the control panel.
9. Check that the mains power light of the ON/
OFF button is ON.
10. Wait at least two hours before starting the dryer (compressor crankcase heater must heat the oil of the compressor)—only models
RD 400 & UP, and RD 500 & UP.
11. Ensure the cooling water flow and temperature is adequate (Water-Cooled).
12. Switch ON the dryer pressing the button "I -
ON" of the ON/OFF switch
13. Ensure that power ON light is ON.
14. Ensure the data plate flow rate match with plant consumption.
15. If the dryer does not start to run check the monitor on the Microprocessor. If the Phase error is mentioned on the screen change the
Phases and re-start the dryer.
16. Allow the dryer temperature to stabilize 10-
15 minutes
17. Slowly open the air inlet valve.
18. Slowly open the air outlet valve.
19. Slowly close the central by-pass valve of the system (if optional By-pass valves are installed).
20. Check the piping for air leakage.
21. Ensure the drain is regularly cycling - wait for its first interventions.
48
SECTION 3 PRODUCT USER MANUAL
For short periods of inactivity, (max 2-3 days) we recommend that power is maintained to the dryer and the control panel.
Otherwise, before re-starting the dryer, it is necessary to wait at least 2-3 hours for the compressor crankcase heater to heat the oil of the compressor (only models RD 400 and above).
SEC 3.23 S TART UP :
1. Check the condenser for cleanliness (Air-
Cooled).
2. Ensure the cooling water flow and temperature is adequate (Water-Cooled).
3. Check that the mains Disconnect ON/OFF switch is ON.
4. Switch ON the dryer pressing the button "I -
ON" of the ON/OFF switch
5. Ensure that electronic Monitor is ON. (RD-
400 & up)
6. Wait a few minutes; verify that the Dew Point temperature displayed on electronic instrument is dropping and condensate drain is discharging .
SEC 3.24 S HUT DOWN
1. Shut down the air compressor.
2. After few minutes, shut down the dryer pressing the button "0 - OFF" of the ON/OFF switch
A Dew Point within 32° F and 50°F ( 0°C and
+10°C ) displayed on Air Dryer Controller is correct according to the possible working conditions (flow-rate, temperature of the incoming air, ambient temperature, etc.).
During the operation, the refrigeration compressor will run continuously on RN series and cycle ON/OFF on RD series. The dryer must remain ON during the full usage period of the compressed air, even if the air compressor works intermittently.
The number of start/stop must be no more than 6 time per hour. The dryer must stop running for at least 5 minutes before being started up again.
The user is responsible for compliance with these rules. Frequent start/Stop may cause irreparable damage to refrigeration compressor.
49
3.20 ED—RN 5-15
02250195-257 R00
3.20 ED—RN 5-15
KEY
29
30
31
25
26
27
28
21
22
23
24
17
18
19
20
13
14
15
16
9
10
11
12
7
8
5
6
3
4
1
2
PART NUMBER DESCRIPTION
M-CMP-0015-115-1-60-A COMPRESSOR
M-CON-0015 CONDENSOR
M-FMT-0075-115-1-60
M-FAN-0015
FAN MOTOR ASSEMBLY
FAN BLADE
M-GRL-0015
M-DRI-0200
M-EXC-0025
M-INL-0015
FAN GRILL
DRIER DEHYDRATOR
HEAT EXCHANGER
FLEXIBLE STEEL TUBE (INLET)
M-EXV-0075
M-HPS-0200
M-FNS-0200
M-THG-0325
M-ONB-0200
M-WSP-0050
M-CFR-0015
M-CLE-0015
EXPANSION VALVE
HIGH PRESSURE SWITCH
FAN ON/OFF SWITCH
THERMOSTATIC GUAGE
ON/OFF BUTTON
WATER SEPARATOR
CABINET FRONT
CABINET SIDE-LEFT
M-CRI-0015
M-CRE-0015
M-CTO-0015
M-CBA-0015
M-CBL-0015
M-HP1-0015
M-CTC-3000
M-CPS-3000
M-PDC-0200
M-SCR-3000
M-STU-3000
M-FAS-3000
M-CSC-0015-115-1-60
M-COP-0015-115-1-60
M-CSR-0015-115-1-60
CABINET SIDE-RIGHT
CABINET REAR
CABINET TOP
CABINET BASE
CABINET LEG
CABINET HORIZONTAL PROFILE
CABINET TOP CORNER
CABINET HANDLE
PLASTIC DISPLAY COVER
SCREW TYPE 1
CABINET STUD AND NUT
CABINET FASTENER
COMPRESSOR START CAPACITOR
COMPRESSOR OVERLOAD PROTECTOR
COMPRESSOR START RELAY
QTY
1
1
1
1
24
12
12
4
3
4
4
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
3.21 ED—RN 25
02250195-258 R00
3.21 ED—RN 25
KEY
29
30
31
32
25
26
27
28
21
22
23
24
17
18
19
20
13
14
15
16
9
10
11
12
7
8
5
6
3
4
1
2
PART NUMBER
M-CMP-0035-115-1-60
M-CON-0035
M-FMT-0075-115-1-60
M-FAN-0075
M-GRL-0075
M-DRI-0200
M-EXC-0025
M-INL-0025
M-EXV-0075
M-HPS-0200
M-FNS-0200
M-THG-0325
M-ONB-0200
M-WSP-0050
M-CFR-0025
M-CLE-0025
M-CRI-0025
M-CRE-0025
M-CTO-0025
M-CBA-0025
M-CBL-0025
M-HP1-0025
M-HP2-0025
M-CTC-3000
M-CPS-3000
M-PDC-0200
M-SCR-0200
M-STU-3000
M-FAS-3000
M-CSC-0035-115-1-60
M-COP-0035-115-1-60
M-STR-0035-115-1-60
DESCRIPTION
COMPRESSOR
CONDENSER
FAN MOTOR
FAN BLADE
FAN GRILL
DRIER DEHYDRATOR
HEAT EXCHANGER
FLEXIBLE STEEL TUBE (INLET)
EXPANSION VALVE
HIGH PRESSURE SWITCH
FAN ON/OFF SWITCH
THERMOSTATIC GAUGE
ON/OFF BUTTON
WATER SEPARATOR
CABINET FRONT
CABINET SIDE-LEFT
CABINET SIDE-RIGHT
CABINET REAR
CABINET TOP
CABINET BASE
CABINET LEG
CABINET HORIZONTAL PROFILE 1
CABINET HORIZONTAL PROFILE 2
CABINET TOP CORNER
CABINET HANDLE
PLASTIC DISPLAY COVER
SCREW TYPE 1
CABINET STUD AND NUT
CABINET FASTENER
COMPRESSOR START CAPACITOR
COMPRESSOR OVERLOAD PROTECTOR
COMPRESSOR START RELAY
QTY
1
1
12
1
24
12
3
1
2
4
4
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
DRYER PART
NUMBER
POWER RATINGS COOLING
02250193-812 115V/1Ph/60Hz AIR COOLED
02250193-870 220V/1Ph/50Hz AIR COOLED
02250193-835 208/230V/1Ph/60Hz AIR COOLED
DECAL
RN25
RN25
RN25
3.22 ED—RN 35-50
02250195-259 R00
3.22 ED—RN 35-50
KEY
29
30
31
32
25
26
27
28
21
22
23
24
17
18
19
20
13
14
15
16
9
10
11
12
7
8
5
6
3
4
1
2
PART NUMBER
M-CMP-0035-115-1-60
M-CON-0035
M-FMT-0075-115-1-60
M-FAN-0075
M-GRL-0075
M-DRI-0200
M-EXC-0025
M-INL-0025
M-EXV-0075
M-HPS-0200
M-FNS-0200
M-THG-0325
M-ONB-0200
M-WSP-0050
M-CFR-0025
M-CLE-0025
M-CRI-0025
M-CRE-0025
M-CTO-0025
M-CBA-0025
M-CBL-0025
M-HP1-0025
M-HP2-0025
M-CTC-3000
M-CPS-3000
M-PDC-0200
M-SCR-0200
M-STU-3000
M-FAS-3000
M-CSC-0035-115-1-60
M-COP-0035-115-1-60
M-STR-0035-115-1-60
DESCRIPTION
COMPRESSOR
CONDENSER
FAN MOTOR
FAN BLADE
FAN GRILL
DRIER DEHYDRATOR
HEAT EXCHANGER
FLEXIBLE STEEL TUBE (INLET)
EXPANSION VALVE
HIGH PRESSURE SWITCH
FAN ON/OFF SWITCH
THERMOSTATIC GAUGE
ON/OFF BUTTON
WATER SEPARATOR
CABINET FRONT
CABINET SIDE-LEFT
CABINET SIDE-RIGHT
CABINET REAR
CABINET TOP
CABINET BASE
CABINET LEG
CABINET HORIZONTAL PROFILE 1
CABINET HORIZONTAL PROFILE 2
CABINET TOP CORNER
CABINET HANDLE
PLASTIC DISPLAY COVER
SCREW TYPE 1
CABINET STUD AND NUT
CABINET FASTENER
COMPRESSOR START CAPACITOR
COMPRESSOR OVERLOAD PROTECTOR
COMPRESSOR START RELAY
QTY
1
1
12
1
24
12
3
1
2
4
4
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
DRYER PART
NUMBER
02250193-813
02250193-836
02250193-871
02250193-814
02250193-838
02250193-872
POWER RATINGS
115V/1Ph/60Hz
208-230V/1Ph/60Hz
220V/1Ph/50Hz
115V/1Ph/60Hz
208-230V/1Ph/60Hz
220V/1Ph/50Hz
COOLING DECAL
AIR COOLED RN35
AIR COOLED RN35
AIR COOLED RN35
AIR COOLED RN50
AIR COOLED RN50
AIR COOLED RN50
3.23 ED—RN 75
02250195-260 R00
3.23 ED—RN 75
KEY
29
30
31
32
25
26
27
28
21
22
23
24
17
18
19
20
13
14
15
16
9
10
11
12
7
8
5
6
3
4
1
2
PART NUMBER
M-CMP-0075-115-1-60
M-CON-0075
M-FMT-0075-115-1-60
M-FAN-0075
M-GRL-0075
M-DRI-0200
M-EXC-0075
M-INL-0100
M-OTL-0100
M-TMR-3000
M-SLV-0150-115
M-EXV-0075
M-HPS-0200
M-FNS-0200
M-THG-0325
M-ONB-0200
M-CFR-0100
M-CLE-0100
M-CRI-0100
M-CRE-0100
M-CTO-0100
M-CBA-0100
M-CBL-0100
M-HP1-0100
M-HP2-0100
M-CTC-3000
M-CPS-3000
M-PDC-0200
M-SCR-0200
M-STU-3000
M-FAS-3000
M-CSC-0100-115-1-60
DESCRIPTION
COMPRESSOR
CONDENSER
FAN MOTOR
FAN BLADE
FAN GRILL
DRIER DEHYDRATOR
HEAT EXCHANGER
FLEXIBLE STEEL TUBE (INLET)
FLEXIBLE STEEL TUBE (OUTLET)
TIMER
SELENOID VALVE
EXPANSION VALVE
HIGH PRESSURE SWITCH
FAN ON/OFF SWITCH
THERMOSTATIC GAUGE
ON/OFF BUTTON
CABINET FRONT
CABINET SIDE-LEFT
CABINET SIDE-RIGHT
CABINET REAR
CABINET TOP
CABINET BASE
CABINET LEG
CABINET HORIZONTAL PROFILE 1
CABINET HORIZONTAL PROFILE 2
CABINET TOP CORNER
CABINET HANDLE
PLASTIC DISPLAY COVER
SCREW TYPE 1
CABINET STUD AND NUT
CABINET FASTENER
COMPRESSOR START CAPACITOR
QTY
24
12
12
1
3
1
2
4
4
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
KEY
33
34
PART NUMBER
M-COP-0100-115-1-60
M-CSR-0100-115-1-60
DESCRIPTION
COMPRESSOR OVERLOAD
PROTECTOR
COMPRESSOR START RELAY
DRYER PART
NUMBER
02250193-815
02250193-839
02250193-873
POWER RATINGS
115V/1Ph/60Hz
208-230V/1Ph/60Hz
220V/1Ph/50Hz
COOLING DECAL
AIR COOLED RN75
AIR COOLED RN75
AIR COOLED RN75
QTY
1
1
3.24 ED—RN 100
02250195-260 R00
3.24 ED—RN 100
KEY
29
30
31
32
25
26
27
28
21
22
23
24
17
18
19
20
13
14
15
16
9
10
11
12
7
8
5
6
3
4
1
2
PART NUMBER
M-THG-0325
M-ONB-0200
M-CFR-0100
M-CLE-0100
M-CRI-0100
M-CRE-0100
M-CTO-0100
M-CBA-0100
M-CBL-0100
M-HP1-0100
M-HP2-0100
M-CTC-3000
M-CPS-3000
M-PDC-0200
M-SCR-0200
M-STU-3000
M-CMP-0100-115-1-60
M-CEB-0100-115-1-60
M-CON-0100
M-FMT-0150-115-1-60
M-FAN-0150
M-GRL-0150
M-DRI-0200
M-EXC-0125
M-INL-0100
M-OTL-0100
M-TMR-3000
M-SLV-0150-115
M-EXV-0200
M-BVY-0100
M-HPS-0200
M-FNS-0200
DESCRIPTION
COMPRESSOR
COMPRESSOR ELECTRIC BOX
CONDENSER
FAN MOTOR
FAN BLADE
FAN GRILL
DRIER DEHYDRATOR
HEAT EXCHANGER
FLEXIBLE STEEL TUBE (INLET)
FLEXIBLE STEEL TUBE (OUTLET)
TIMER
SELENOID VALVE
EXPANSION VALVE
BY-PASS VALVE
HIGH PRESSURE SWITCH
FAN ON/OFF SWITCH
THERMOSTATIC GAUGE
ON/OFF BUTTON
CABINET FRONT
CABINET SIDE-LEFT
CABINET SIDE-RIGHT
CABINET REAR
CABINET TOP
CABINET BASE
CABINET LEG
CABINET HORIZONTAL PROFILE 1
CABINET HORIZONTAL PROFILE 2
CABINET TOP CORNER
CABINET HANDLE
PLASTIC DISPLAY COVER
SCREW TYPE 1
CABINET STUD AND NUT
QTY
24
12
3
1
2
4
4
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
KEY
33
34
35
36
PART NUMBER
M-FAS-3000
M-CSC-0100-115-1-60
M-CSR-0100-115-1-60
M-COP-0100-115-1-60
DESCRIPTION
CABINET FASTENER
COMPRESSOR START CAPACITOR
COMPRESSOR START RELAY
COMPRESSOR OVERLOAD
PROTECTOR
QTY
12
1
1
1
DRYER PART
NUMBER
02250193-816
02250193-841
02250193-874
POWER RATINGS
115V/1Ph/60Hz
208-230V/1Ph/60Hz
220V/1Ph/50Hz
COOLING DECAL
AIR COOLED RN100
AIR COOLED RN100
AIR COOLED RN100
3.25 ED—RN 125
02250195-261 R00
3.25 ED—RN 125
KEY
13
14
15
16
9
10
11
12
7
8
5
6
3
4
1
2
21
22
23
24
25
17
18
19
20
PART NUMBER
M-CMP-0125-115-1-60-A
M-CEB-0125-115-1-60
M-CON-0150
M-FMT-0150-115-1-60
M-FAN-0150
M-GRL-0150
M-DRI-0200
M-EXC-0125
M-INL-0150
M-OTL-0150
M-TMR-3000
M-SLV-0150-115
M-EXV-0200
M-BVY-0200
M-HPS-0200
M-FNS-0200
M-THG-0325
M-ONB-0200
M-CFR-0150
M-CLE-0150
M-CRI-0150
M-CRE-0150
M-CTO-0150
M-CBA-0150
M-CBL-0150
26
27
28
29
30
M-HP1-0150
M-HP2-0150
M-CTC-3000
M-CPS-3000
M-PDC-0200
DESCRIPTION
COMPRESSOR
COMPRESSOR ELECTRIC BOX
CONDENSER
FAN MOTOR
FAN BLADE
FAN GRILL
DRIER DEHYDRATOR
HEAT EXCHANGER
FLEXIBLE STEEL TUBE (INLET)
FLEXIBLE STEEL TUBE (OUTLET)
TIMER
SELENOID VALVE
EXPANSION VALVE
BY-PASS VALVE
HIGH PRESSURE SWITCH
FAN ON/OFF SWITCH
THERMOSTATIC GAUGE
ON/OFF BUTTON
CABINET FRONT
CABINET SIDE-LEFT
CABINET SIDE-RIGHT
CABINET REAR
CABINET TOP
CABINET BASE
CABINET LEG
CABINET HORIZONTAL PROFILE
1
CABINET HORIZONTAL PROFILE
2
CABINET TOP CORNER
CABINET HANDLE
PLASTIC DISPLAY COVER
QTY
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
4
1
1
1
1
2
5
1
2
4
34
35
36
KEY
31
32
33
DRYER PART
NUMBER
02250193-817
02250193-842
02250193-875
PART NUMBER
M-SMS-3000
M-STU-3000
M-FAS-3000
M-CSC-0150-115-1-60
M-CSR-0150-115-1-60
M-COP-0150-115-1-60
DESCRIPTION
SHEET METAL SCREW
CABINET STUD AND NUT
CABINET FASTENER
COMPRESSOR START
CAPACITOR
COMPRESSOR START RELAY
COMPRESSOR OVERLOAD
PROTECTOR
POWER RATINGS
115V/1Ph/60Hz
208-230V/1Ph/60Hz
220V/1Ph/50Hz
COOLING DECAL
AIR COOLED RN125
AIR COOLED RN125
AIR COOLED RN125
1
1
1
QTY
26
10
10
3.26 ED—RN 150
02250195-262 R00
3.26 ED—RN 150
KEY
29
30
31
32
25
26
27
28
21
22
23
24
17
18
19
20
13
14
15
16
9
10
11
12
7
8
5
6
3
4
1
2
PART NUMBER
M-CMP-0150-115-1-60-A
M-CEB-0150-115-1-60
M-CON-0150
M-FMT-0150-115-1-60
M-FAN-0150
M-GRL-0150
M-DRI-0200
M-EXC-0150
M-INL-0150
M-OTL-0150
M-TMR-3000
M-SLV-0150-115
M-EXV-0200
M-BVY-0200
M-HPS-0200
M-FNS-0200
M-THG-0325
M-ONB-0200
M-CFR-0150
M-CLE-0150
M-CRI-0150
M-CRE-0150
M-CTO-0150
M-CBA-0150
M-CBL-0150
M-HP1-0150
M-HP2-0150
M-CTC-3000
M-CPS-3000
M-PDC-0200
M-SCR-0200
M-STU-3000
DESCRIPTION
COMPRESSOR
COMPRESSOR ELECTRIC BOX
CONDENSER
FAN MOTOR
FAN BLADE
FAN GRILL
DRIER DEHYDRATOR
HEAT EXCHANGER
FLEXIBLE STEEL TUBE (INLET)
FLEXIBLE STEEL TUBE (OUTLET)
TIMER
SELENOID VALVE
EXPANSION VALVE
BY-PASS VALVE
HIGH PRESSURE SWITCH
FAN ON/OFF SWITCH
THERMOSTATIC GAUGE
ON/OFF BUTTON
CABINET FRONT
CABINET SIDE-LEFT
CABINET SIDE-RIGHT
CABINET REAR
CABINET TOP
CABINET BASE
CABINET LEG
CABINET HORIZONTAL PROFILE 1
CABINET HORIZONTAL PROFILE 2
CABINET TOP CORNER
CABINET HANDLE
PLASTIC DISPLAY COVER
SCREW TYPE 1
CABINET STUD AND NUT
QTY
26
12
5
1
2
4
4
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
KEY
33
34
35
36
PART NUMBER
M-FAS-3000
M-CSC-0150-115-1-60
M-CSR-0150-115-1-60
M-COP-0150-115-1-60
DESCRIPTION
CABINET FASTENER
COMPRESSOR START CAPACITOR
COMPRESSOR START RELAY
COMPRESSOR OVERLOAD
PROTECTOR
DRYER PART
NUMBER
02250193-818
02250193-843
POWER RATINGS
115V/1Ph/60Hz
208-230V/1Ph/60Hz
COOLING DECAL
AIR COOLED RN150
AIR COOLED RN150
QTY
12
1
1
1
3.27 ED—RN 175
02250195-263 R00
3.27 ED—RN 175
KEY
29
30
31
32
25
26
27
28
21
22
23
24
17
18
19
20
13
14
15
16
9
10
11
12
7
8
5
6
3
4
1
2
PART NUMBER
M-CMP-0200-220-1-50-A
M-CEB-0200-220-1-50
M-CON-0175
M-FMT-0200-220-1-50
M-FAN-0200
M-GRL-0200
M-DRI-0200
M-EXC-0200
M-INL-0200
M-OTL-0200
TMR-3000
M-SLV-0200-230
M-EXV-0200
M-BYY-0200
M-HPS-0200
M-FNS-0200
M-THG-0325
M-ONB-0200
M-CFR-0200
M-CLE-0200
M-CRI-0200
M-CRE-0200
M-CTO-0200
M-CBA-0200
M-CBL-0200
M-HP1-0200
M-HP2-0200
M-CTC-3000
M-CPS-3000
M-PDC-0200
M-SCR-200
M-STU-3000
DESCRIPTION
COMPRESSOR
COMPRESSOR ELECTRIC BOX
CONDENSOR
FAN MOTOR ASSEMBLY
FAN BLADE
FAN GRILL
DRIER DEHYDRATOR
HEAT EXCHANGER
FLEXIBLE STEEL TUBE (INLET)
FLEXIBLE STTEL TUBE (OUTLET)
TIMER
SOLENOID VALVE
EXPANSION VALVE
BY-PASS VALVE
HIGH PRESSURE SWITCH
FAN ON-OFF SWITCH
THERMOSTATIC GUAGE
ON-OFF BUTTON
CABINET FRONT
CABINET SIDE-LEFT
CABINET SIDE-RIGHT
CABINET REAR
CABINET TOP
CABINET BASE
CABINET LEG
CABINET HORIZONTAL PROFILE 1
CABINET HORIZONTAL PROFILE 2
CABINET TOP CORNER
CABINET HANDLE
PLASTIC DISPLAY COVER
SCREW TYPE 1
CABINET STUD AND NUT
QTY
1
1
1
1
1
1
2
1
1
1
1
1
1
1
1
1
2
1
1
8
4
2
2
1
4
1
1
12
12
12
KEY
33
34
35
36
37
DRYER PART
NUMBER
02250193-876
02250193-845
PART NUMBER
M-FAS-3000
M-CSC-0200-220-1-60
M-CSR-0200-220-1-60
M-COP-0200-220-1-60
M-RUN-0325-220-1-60
DESCRIPTION
CABINET FASTENER
COMPRESSOR START CAPACITOR
COMPRESSOR START RELAY
COMPRESSOR OVERLOAD
ROTECTOR
RUN CAPACITOR
QTY
16
1
1
1
1
POWER RATINGS
220V/1Ph/50Hz
208-230V/1Ph/60Hz
COOLING DECAL
AIR COOLED RN175
AIR COOLED RN175
3.28 ED—RN 200
02250195-263 R00
3.28 ED—RN 200
KEY
29
30
31
32
25
26
27
28
21
22
23
24
17
18
19
20
13
14
15
16
9
10
11
12
7
8
5
6
3
4
1
2
PART NUMBER DESCRIPTION
M-CMP-0200-220-1-50-A COMPRESSOR
M-CEB-0200-220-1-50 COMPRESSOR ELECTRIC BOX
M-CON-0200
M-FMT-0200-220-1-50
CONDENSOR
FAN MOTOR ASSEMBLY
M-FAN-0200
M-GRL-0200
M-DRI-0200
M-EXC-0200
FAN BLADE
FAN GRILL
DRIER DEHYDRATOR
HEAT EXCHANGER
M-INL-0200
M-OTL-0200
TMR-3000
M-SLV-0200-230
M-EXV-0200
M-BYY-0200
M-HPS-0200
M-FNS-0200
FLEXIBLE STEEL TUBE (INLET)
FLEXIBLE STTEL TUBE (OUTLET)
TIMER
SOLENOID VALVE
EXPANSION VALVE
BY-PASS VALVE
HIGH PRESSURE SWITCH
FAN ON-OFF SWITCH
M-THG-0325
M-ONB-0200
M-CFR-0200
M-CLE-0200
M-CRI-0200
M-CRE-0200
M-CTO-0200
M-CBA-0200
M-CBL-0200
M-HP1-0200
M-HP2-0200
M-CTC-3000
M-CPS-3000
M-PDC-0200
M-SCR-200
M-STU-3000
THERMOSTATIC GUAGE
ON-OFF BUTTON
CABINET FRONT
CABINET SIDE-LEFT
CABINET SIDE-RIGHT
CABINET REAR
CABINET TOP
CABINET BASE
CABINET LEG
CABINET HORIZONTAL PROFILE 1
CABINET HORIZONTAL PROFILE 2
CABINET TOP CORNER
CABINET HANDLE
PLASTIC DISPLAY COVER
SCREW TYPE 1
CABINET STUD AND NUT
QTY
1
1
1
1
1
1
2
1
1
1
1
1
1
1
1
1
2
1
1
8
4
2
2
1
4
1
1
12
12
12
KEY
33
34
35
36
37
PART NUMBER
M-FAS-3000
M-CSC-0200-220-1-60
M-CSR-0200-220-1-60
M-COP-0200-220-1-60
M-RUN-0200-220-1-60
DESCRIPTION
CABINET FASTENER
COMPRESSOR START CAPACITOR
COMPRESSOR START RELAY
COMPRESSOR OVERLOAD
ROTECTOR
RUN CAPACITOR
QTY
16
1
1
1
1
DRYER PART
NUMBER
02250193-877
02250193-846
POWER RATINGS
220V/1Ph/50Hz
208-230V/1Ph/60Hz
COOLING DECAL
AIR COOLED RN200
AIR COOLED RN200
3.29 ED—RN 250
02250195-264 R00
3.29 ED—RN 250
KEY
12
13
14
15
8
9
10
11
16
17
18
19
20
6
7
4
5
1
2
3
PART NUMBER
SEE REF. TABLE
M-CON-0325
SEE REF. TABLE
M-DRI-1000
M-EXC-0125
M-EXV-0850
M-BYY-1000
M-RCV-0850
M-HPS-1000
M-FNS-0400
M-LPS-1000
M-THS-0325
M-THG-0325
M-MNS-0700
M-TMR-3000
M-SLV-0200-230
M-MMV-3000
M-MMM-3000
M-CFR-0400
M-CSI-0400
DESCRIPTION
COMPRESSOR
CONDENSOR
FAN MOTOR ASSEMBLY
DRIER DEHYDRATOR
HEAT EXCHANGER
EXPANSION VALVE
BY-PASS VALVE
LIQUID RECEIVER
HIGH PRESSURE SECURITY SWITCH
FAN ON/OFF SWITCH
LOW PRESSURE SWITCH
THERMOSTATIC SWITCH
THERMOSTATIC GUAGE
MAIN SWITCH
TIMER
SOLENOID VALVE
MEMBRANE VALVE
MEMBRANE
CABINET FRONT
CABINET SIDE
QTY
1
1
1
1
1
1
1
1
1
1
1
1
2
1
1
1
2
1
1
1
KEY
32
33
34
35
28
29
30
31
24
25
26
27
21
22
23
40
41
42
36
37
38
39
PART NUMBER
M-CRE-0400
M-CTO-0400
M-CBA-0400
M-CBL-0150
M-HP1-0400
M-HP2-0400
M-CPS-3000
M-CTC-3000
M-STU-3000
M-FAS-3000
M-NUT-3000
M-SMS-3000
SEE REF. TABLE
SEE REF. TABLE
SEE REF. TABLE
SEE REF. TABLE
SEE REF. TABLE
SEE REF. TABLE
SEE REF. TABLE
SEE REF. TABLE
SEE REF. TABLE
SEE REF. TABLE
DESCRIPTION
CABINET REAR
CABINET TOP
CABINET BASE
CABINET LEG
CABINET HORIZONTAL PROFILE 1
CABINET HORIZONTAL PROFILE 2
CABINET HANDLE
CABINET TOP CORNER
CABINET STUD AND NUT
CABINET FASTENER
CAGE NUT AND SCREW
SCREW TYPE 2
TRANSFORMER
PHASE PROTECTION RELAY
CONTACTOR
FAN CONTACTOR
COMPRESSOR OVERLOAD PROTECTOR
FAN OVERLOAD PROTECTOR
ON-OFF BUTTON
COMPRESSOR START CAPACITOR
COMPRESSOR START RELAY
RUN CAPACITOR
DECAL
DRYER PART
NUMBER
POWER
RATINGS
RN250 02250193-880
230V/3Ph/
60Hz
RN250 02250193-847
208-230V/
1Ph/60Hz
RN250 02250193-979
RN250 02250193-134
460V/3Ph/
60Hz
575V/3Ph/
60Hz
RN250 02250193-878
220V/1Ph/
50Hz
COOLING
AIR
COOLED
AIR
COOLED
AIR
COOLED
AIR
COOLED
RUN
CAPACITOR
N/A
N/A
N/A
COMP.
START
RELAY
N/A
N/A
N/A
M-RUN-0250-
220-1-50-A
M-STR-
0250-220-
1-50-A
COMP. START
CAPACITOR
ON-OFF
BUTTON
FAN
OVERLOAD
PROTECTOR
N/A
AIR
COOLED
M-RUN-0250-
230-1-60-A
M-STR-
0250-230-
1-60-A
M-CSC-0250-
230-1-60-A
N/A
N/A
M-CSC-0250-
220-1-50-A
M-ONB-
3000
N/A
M-ONB-
3000
M-ONB-
3000
N/A
M-FOP-3000
N/A
M-FOP-3000
M-FOP-3000
N/A
COMP.
OVERLOAD
PROTECTOR
M-COP-0250-
230-3-60-A
N/A
M-COP-0250-
460-3-60-A
M-COP-0250-
575-3-60-A
N/A
FAN
CONTACTOR
CONTACTOR
PHASE
PROTECTION
RELAY
TRANSFORMER FAN MOTOR COMPRESSOR
M-FCN-1000 M-CNT-0400 M-PPR-1000 M-TRF-1000
M-FMT-0250-
230-3-60-A
M-CMP-0250-
230-3-60-A
N/A
M-FCN-1000
M-FCN-1000
N/A
N/A
M-CNT-0400
M-CNT-0400
N/A
N/A
M-PPR-1000
M-PPR-1000
N/A
N/A
M-TRF-1000
M-TRF-1000
N/A
M-FMT-0250-
230-1-60-A
M-FMT-0250-
460-3-60-A
M-FMT-0250-
575-3-60-A
M-FMT-0250-
220-1-50-A
M-CMP-0250-
230-1-60-A
M-CMP-0250-
460-3-60-A
M-CMP-0250-
575-3-60-A
M-CMP-0250-
220-1-50-A
QTY
16
1
1
1
4
12
12
12
2
8
4
2
1
1
1
1
1
1
1
1
1
1
3.30 ED—RN 325 (230)
02250195-264 R00
3.30 ED—RN 325 (230)
KEY
29
30
31
32
25
26
27
28
21
22
23
24
17
18
19
20
13
14
15
16
9
10
11
12
7
8
5
6
3
4
1
2
PART NUMBER DESCRIPTION
M-CMP-0325-460-3-60-A COMPRESSOR
M-CON-0325 CONDENSOR
M-FMT-0700-460-3-60
M-DRI-1000
FAN MOTOR ASSEMBLY
DRIER DEHYDRATOR
M-EXC-0200
M-EXV-0850
M-BYY-1000
M-RCV-0850
HEAT EXCHANGER
EXPANSION VALVE
BY-PASS VALVE
LIQUID RECEIVER
M-HPS-1000
M-FNS-0400
M-LPS-1000
M-THS-0325
M-THG-0325
M-MNS-0700
M-TMR-3000
M-SLV-3000-24
HIGH PRESSURE SECURITY SWITCH
FAN ON/OFF SWITCH
LOW PRESSURE SWITCH
THERMOSTATIC SWITCH
THERMOSTATIC GUAGE
MAIN SWITCH
TIMER
SOLENOID VALVE
M-MMV-3000
M-MMM-3000
M-CFR-0400
M-CLE-0400
M-CRE-0400
M-CTO-0400
M-CBA-0400
M-CBL-0400
M-HP1-0400
M-HP2-0400
M-CPS-3000
M-CTC-3000
M-STU-3000
M-FAS-3000
M-NUT-3000
M-SCR-3000
MEMBRANE VALVE
MEMBRANE
CABINET FRONT
CABINET SIDE
CABINET REAR
CABINET TOP
CABINET BASE
CABINET LEG
CABINET HORIZONTAL PROFILE 1
CABINET HORIZONTAL PROFILE 2
CABINET HANDLE
CABINET TOP CORNER
CABINET STUD AND NUT
CABINET FASTENER
CAGE NUT AND SCREW
SCREW TYPE 2
QTY
12
12
16
16
8
4
2
2
1
4
1
1
1
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
KEY
33
34
35
PART NUMBER DESCRIPTION
M-COP-0325-460-3-60-A COMPRESSOR START CAPACITOR
M-STR-0325-230-60 COMPRESSOR START RELAY
M-RUN-0325-230-60 RUN CAPACITOR
DRYER PART
NUMBER
02250193-848
02250193-980
02250193-135
02250193-879
POWER RATINGS
208-230V/1Ph/60Hz
460V/3Ph/60Hz
575V/3Ph/60Hz
575V/3Ph/60hZ
COOLING DECAL
AIR COOLED RN325
AIR COOLED RN325
AIR COOLED RN325
AIR COOLED RN325
QTY
1
1
1
3.31 ED—RN 325 (460)
02250195-264 R00
3.31 ED—RN 325 (460)
KEY
29
30
31
32
25
26
27
28
21
22
23
24
17
18
19
20
13
14
15
16
9
10
11
12
7
8
5
6
3
4
1
2
PART NUMBER DESCRIPTION
M-CMP-0325-460-3-60-A COMPRESSOR
M-CON-0325 CONDENSOR
M-FMT-0700-460-3-60
M-DRI-1000
FAN MOTOR ASSEMBLY
DRIER DEHYDRATOR
M-EXC-0200
M-EXV-0850
M-BYY-1000
M-RCV-0850
HEAT EXCHANGER
EXPANSION VALVE
BY-PASS VALVE
LIQUID RECEIVER
M-HPS-1000
M-FNS-0400
M-LPS-1000
M-THS-0325
M-THG-0325
M-MNS-0700
M-TMR-3000
M-SLV-3000-24
HIGH PRESSURE SECURITY SWITCH
FAN ON/OFF SWITCH
LOW PRESSURE SWITCH
THERMOSTATIC SWITCH
THERMOSTATIC GUAGE
MAIN SWITCH
TIMER
SOLENOID VALVE
M-MMV-3000
M-MMM-3000
M-CFR-0400
M-CLE-0400
M-CRE-0400
M-CTO-0400
M-CBA-0400
M-CBL-0400
M-HP1-0400
M-HP2-0400
M-CPS-3000
M-CTC-3000
M-STU-3000
M-FAS-3000
M-NUT-3000
M-SCR-3000
MEMBRANE VALVE
MEMBRANE
CABINET FRONT
CABINET SIDE
CABINET REAR
CABINET TOP
CABINET BASE
CABINET LEG
CABINET HORIZONTAL PROFILE 1
CABINET HORIZONTAL PROFILE 2
CABINET HANDLE
CABINET TOP CORNER
CABINET STUD AND NUT
CABINET FASTENER
CAGE NUT AND SCREW
SCREW TYPE 2
QTY
12
12
16
16
8
4
2
2
1
4
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
KEY
33
34
35
36
37
38
39
PART NUMBER
M-TRF-1000
M-PPR-1000
M-CNT-0400
M-FCN-1000
M-COP-0325-460-3-60-A
M-FOP-3000
M-ONB-3000
DESCRIPTION
TRANSFORMER
PHASE PROTECTION RELAY
CONTACTOR
FAN CONTACTOR
COMPRESSOR OVERLOAD
PROTECTOR
FAN OVERLOAD PROTECTOR
ON-OFF BUTTON
DRYER PART
NUMBER
02250193-848
02250193-980
02250193-135
02250193-879
POWER RATINGS
208-230V/1Ph/60Hz
460V/3Ph/60Hz
575V/3Ph/60Hz
575V/3Ph/60hZ
COOLING DECAL
AIR COOLED RN325
AIR COOLED RN325
AIR COOLED RN325
AIR COOLED RN325
QTY
1
1
1
1
1
1
1
3.32 ID—RN5-15
02250195-257 R00
3.32 ID—RN5-15
DRYER PART NUMBER
02250193-807
02250193-809
02250193-810
02250193-869
WITHOUT PALLET SIZE
13.8” x 13.8” x 24”
350mm x 350mm x 610mm
POWER RATINGS
115V/1Ph/60Hz
115V/1Ph/60Hz
115V/1Ph/60Hz
220V/1Ph/50Hz
COOLING
AIR COOLED
AIR COOLED
AIR COOLED
AIR COOLED
WITH PALLETT SIZE
17.52” x 17.52” x 31.5”
445mm x 445mm x 800mm
DECAL
RN5
RN10
RN15
RN15
GROSS
WEIGHT
85 LB
NET
WEIGHT
70.5 LB
3.33 ID—RN25
02250195-258 R00
3.33 ID—RN25
DRYER PART NUMBER
02250193-812
02250193-870
02250193-835
POWER RATINGS
115V/1Ph/60Hz
220V/1Ph/50Hz
208/230V/1Ph/60Hz
COOLING
AIR COOLED
AIR COOLED
AIR COOLED
WITHOUT PALLET SIZE
15.55” x 13.8” x 24”
350mm x 395mm x 610mm
WITH PALLETT SIZE
17.52” x 18.9” x 31.5”
445mm x 480mm x 800mm
DECAL
RN25
RN25
RN25
GROSS
WEIGHT
95 LB
NET
WEIGHT
74 LB
3.34 ID—RN35/50
02250195-259 R00
3.34 ID—RN35/50
DRYER PART NUMBER
02250193-813
02250193-836
02250193-871
02250193-814
02250193-838
02250193-872
WITHOUT PALLET SIZE
15.35” x 17.71” x 23.23”
390mm x 450mm x 590mm
POWER RATINGS
115V/1Ph/60Hz
208-230V/1Ph/60Hz
220V/1Ph/50Hz
115V/1Ph/60Hz
208-230V/1Ph/60Hz
220V/1Ph/50Hz
COOLING
AIR COOLED
AIR COOLED
AIR COOLED
AIR COOLED
AIR COOLED
AIR COOLED
WITH PALLETT SIZE
19.23” x 21.26” x 30.7”
490mm x 540mm x 780mm
DECAL
RN35
RN35
RN35
RN50
RN50
RN50
GROSS
WEIGHT
109 LB
NET
WEIGHT
94 LB
3.35 ID—RN75-100
02250195-260
3.35 ID—RN75-100
DRYER PART NUMBER
02250193-815
02250193-839
02250193-873
02250193-816
02250193-841
02250193-874
WITHOUT PALLET SIZE
15.35” x 17.52” x 28.74”
390mm x 445mm x 730mm
POWER RATINGS
115V/1Ph/60Hz
208-230V/1Ph/60Hz
220V/1Ph/50Hz
115V/1Ph/60Hz
208-230V/1Ph/60Hz
220V/1Ph/50Hz
COOLING
AIR COOLED
AIR COOLED
AIR COOLED
AIR COOLED
AIR COOLED
AIR COOLED
WITH PALLETT SIZE
19.01” x 21.26” x 36.22”
485mm x 540mm x 920mm
DECAL
RN75
RN75
RN75
RN100
RN100
RN100
GROSS
WEIGHT
165 LB
143 LB
NET
WEIGHT
145 LB
125 LB
DRYER
RN100
RN75
3.36 ID—RN125
02250195-261
3.36 ID—RN125
DRYER PART NUMBER
02250193-817
02250193-842
02250193-875
POWER RATINGS
115V/1Ph/60Hz
208-230V/1Ph/60Hz
220V/1Ph/50Hz
COOLING
AIR COOLED
AIR COOLED
AIR COOLED
WITHOUT PALLET SIZE
17.52” x 21.46” x 31.7”
445mm x 545mm x 805mm
WITH PALLETT SIZE
21.65” x 25.2” x 38.98”
550mm x 640mm x 990mm
DECAL
RN125
RN125
RN125
GROSS
WEIGHT
197 LB
NET
WEIGHT
176 LB
3.37 ID—RN150
02250195-262
3.37 ID—RN150
DRYER PART NUMBER
02250193-818
02250193-843
WITHOUT PALLET SIZE
17.52” x 23.42” x 31.7”
445mm x 595mm x 805mm
POWER RATINGS
115V/1Ph/60Hz
208-230V/1Ph/60Hz
COOLING
AIR COOLED
AIR COOLED
WITH PALLETT SIZE
21.26” x 26.77” x 39.37”
540mm x 680mm x 1000mm
DECAL
RN150
RN150
GROSS
WEIGHT
215 LB
NET
WEIGHT
194 LB
3.38 ID—RN175-200
02250195-263
3.38 ID—RN175-200
DRYER PART NUMBER
02250193-876
02250193-845
02250193-877
02250193-846
WITHOUT PALLET SIZE
21.46” x 23.42” x 34.25”
545mm x 595mm x 870mm
POWER RATINGS
220V/1Ph/50Hz
208-230V/1Ph/60Hz
220V/1Ph/50Hz
208-230V/1Ph/60Hz
COOLING
AIR COOLED
AIR COOLED
AIR COOLED
AIR COOLED
WITH PALLETT SIZE
25.6” x 27.56” x 41.34”
650mm x 700mm x 1050mm
DECAL
RN175
RN175
RN200
RN200
GROSS
WEIGHT
242.5 LB
NET
WEIGHT
217 LB
3.39 ID—RN250-400
02250195-264
3.39 ID—RN250-400
DRYER PART NUMBER
02250193-880
02250193-847
02250193-979
02250193-134
02250193-878
02250193-848
02250193-980
02250193-135
02250193-879
02250193-849
02250193-917
02250193-981
02250193-136
POWER RATINGS
230V/3Ph/60Hz
208-230V/1Ph/60Hz
460V/3Ph/60Hz
575V/3Ph/60Hz
220V/1Ph/50Hz
208-230V/1Ph/60Hz
460V/3Ph/60Hz
575V/3Ph/60Hz
575V/3Ph/60Hz
230V/3Ph/60Hz
400V/3Ph/50Hz
460V/3Ph/60Hz
575V/3Ph/60Hz
COOLING
AIR COOLED
AIR COOLED
AIR COOLED
AIR COOLED
AIR COOLED
AIR COOLED
AIR COOLED
AIR COOLED
AIR COOLED
AIR COOLED
AIR COOLED
AIR COOLED
AIR COOLED
WITHOUT PALLET SIZE
23.23” x 27.98” x 49.8”
590mm x 710mm x 1265mm
WITH PALLETT SIZE
26.38” x 30.32” x 56.3”
670mm x 770mm x 1430mm
GROSS
WEIGHT
525 LB
494 LB
465 LB
DECAL
RN325
RN325
RN400
RN400
RN400
RN400
RN250
RN250
RN250
RN250
RN250
RN325
RN325
NET
WEIGHT
507 LB
463 LB
436.5 LB
DRYER
RD400
RN325
RN250
3.40 P&I—RN5-10-15-25
02250195-288
3.40 P&I—RN250-400
KEY
6
7
4
5
8
1
2
3
DESCRIPTION
COMPRESSOR
REFRIGERANT CONDENSOR
FAN MOTOR
FAN MOTOR SWITCH
AIR/FREON HEAT EXCHANGER
SEPARATOR
PRESSURE REGULATOR
DEHYDRATOR
MODEL
RN5
RN10
RN15
RN25
REFRIGERANT
TYPE
R134A
LB
0.617
0.617
0.661
0.705
NOTE: MARK/TAG COMPONENT/CONTAINER WITH SULLAIR P/N AND REVISION
3.41 P&I—RN35-75
02250195-289
3.41 P&I—RN35-75
KEY
6
7
4
5
8
9
1
2
3
DESCRIPTION
COMPRESSOR
REFRIGERANT CONDENSOR
FAN MOTOR
FAN MOTOR SWITCH
EVAPORATOR
AIR-AIR EXCHANGER
PRESSURE REGULATOR
DEHYDRATOR
DEW POINT INDICATOR
MODEL
RN35
RN50
RN75
REFRIGERANT
TYPE
R134A
LB
0.881
0.881
1.102
NOTE: MARK/TAG COMPONENT/CONTAINER WITH SULLAIR P/N AND REVISION
3.42 P&I—RN100-200
02250195-290
3.42 P&I—RN100-200
KEY
6
7
4
5
1
2
3
8
9
10
DESCRIPTION
COMPRESSOR
REFRIGERANT CONDENSOR
FAN MOTOR
FAN MOTOR SWITCH
EVAPORATOR
AIR-AIR EXCHANGER
PRESSURE REGULATOR
DEHYDRATOR
DEW POINT INDICATOR
BY-PASS VALVE
MODEL
RN100
RN125
RN150
RN175
RN200
REFRIGERANT
TYPE
R134A
LB
1.543
2.866
2.866
2.866
2.866
NOTE: MARK/TAG COMPONENT/CONTAINER WITH SULLAIR P/N AND REVISION
3.43 P&I—RN250-325
02250195-291
3.44 P&I—RD400-500-700-850
02250195-293
3.45 P&I—RD700-850
02250195-294
3.46 P&I—RD1000-1200-1600-2000-2400-3000-3800-5000-6000
02250195-297
3.47 P&I—RD1000-1200-1600-2000-2400-3000-3800-5000-6000
02250195-298
NOTES
101
3.48 WIRING DIAGRAM—RN5-10-15-20-25
02250195-306
3.48 WIRING DIAGRAM—RN5-10-15-20-25
COMP DESCRIPTION
A40 Start capacitor
K01 Compressor motor starter relay
S01 Main switch
S10 Fan pressure control switch
S11 Safety control switch
M01 Compressor motor
M10 Fan motor
P Compressor motor protector
HP Indicates high pressure in the circuit
3.49 WIRING DIAGRAM—RN35-50-75-100
02250195-307
3.49 WIRING DIAGRAM—RN30-50-75-100
COMP DESCRIPTION
A20 Drain timer supply
A40 Start capacitor
K01 Compressor motor starter relay
S01 Main switch
S10 Fan pressure control switch
S11 Safety control switch
M01 Compressor motor
M10 Fan motor
P
HP
Compressor motor protector
Indicates high pressure in the circuit
3.50 WIRING DIAGRAM—RN125-150
02250195-308
3.50 WIRING DIAGRAM—RN125-150
COMP DESCRIPTION
A20 Drain timer supply
A40 Start capacitor
K01 Compressor motor starter relay
S01 Main switch
S10 Fan pressure control switch
S11 Safety control switch
M01 Compressor motor
M10 Fan motor
P
HP
Compressor motor protector
Indicates high pressure in the circuit
3.51 WIRING DIAGRAM—RN175
02250195-309
3.51 WIRING DIAGRAM—RN175
COMP DESCRIPTION
A20 Drain timer supply
A31 Starting capacitor resistance
A40-1 Start capacitor
A40-2 Run capacitor
K01 Compressor motor starter relay
S01 Main switch
S02 Remote control start
S10 Fan pressure control switch
S11 Safety control switch
M01 Compressor motor
M10 Fan motor
P Compressor motor protector
HP Indicates high pressure in the circuit
3.52 WIRING DIAGRAM—RN200
02250195-310
3.52 WIRING DIAGRAM—RN200
COMP DESCRIPTION
A20 Drain timer supply
A31 Starting capacitor resistance
A40-1 Start capacitor
A40-2 Run capacitor
K01 Compressor motor starter relay
S01 Main switch
S02 Remote control start
S10 Fan pressure control switch
S11 Safety control switch
M01 Compressor motor
M10 Fan motor
P Compressor motor protector
HP Indicates high pressure in the circuit
3.53 WIRING DIAGRAM—RN250-325
02250195-311
3.53 WIRING DIAGRAM—RN250-325
COMP DESCRIPTION
A20 Drain timer supply
A30 Compressor chankaser heater
A31 Starting capacitor resistance
A40-1 Start capacitor
A40-2 Run capacitor
K01 Compressor motor starter relay
S01 Main switch
S02 Remote control start
S10 Fan pressure control switch
S11 Safety control switch
M01 Compressor motor
M10 Fan motor
P
HP
Compressor motor protector
Indicates high pressure in the circuit
3.54 WIRING DIAGRAM—RN250-325 (230-3-60-A)
02250195-973-1
3.54 WIRING DIAGRAM—RN250-325 (230-3-60-A)
COMP DESCRIPTION
M10
P01
P10
S01
F13
K01
K10
M01
A01
A30
B01
B15
Control circuit transformer
Compressor chankaser heater
Main terminal block
Control circuit supply
EMR4 Phase protection relay
F1, F2, F3 EMR4 overload protection
F4
F5
A01 primary protection
A30 overload protection
A01 Secondary protection
Compressor contactor
Fan contactor
Compressor motor
Fan motor
Thermal protection of compressor
Over load protector of fan motor
Main switch
3.55 WIRING DIAGRAM—RN250-325 (230-3-60-A)
02250195-973-2
3.55 WIRING DIAGRAM—RN250-325 (230-3-60-A)
COMP DESCRIPTION
F10 Control circuit protection
K01 Compressor motor relay
K10 Fan motor relay
P01 Thermal protection of compressor
P10 Thermal protection of fan
S02-1 Start button on control panel
S02-2 Remote control start button
S03-1 Stop button on control panel
S03-2 Remote control stop button
S10 Fan high pressure control switch
S11 High pressure safety control switch
S20 Safety thermostat
S30 Fan protector
A10-1 Running lamp on control panel (Green)
A10-2 Remote control running lamp (Green)
A11-1 Stand-by lamp on control panel (red)
A11-2 Remote control Stand-by lamp (red)
A20 Drain timer supply
EMR4 Phase protection relay
AL Alarm contact
HP
LP
TH
Indicates high pressure
Indicates low pressure
Indicates high temperature in the circuit
3.56 WIRING DIAGRAM—RN250-325 (460-3-60-A, 400-3-50-A)
02250195-312-1
3.56 WIRING DIAGRAM—RN250-325 (460-3-60-A, 400-3-50-A)
COMP DESCRIPTION
M10
P01
P10
S01
F13
K01
K10
M01
A01
A30
B01
B15
Control circuit transformer
Compressor chankaser heater
Main terminal block
Control circuit supply
EMR4 Phase protection relay
F1, F2, F3 EMR4 overload protection
F4
F5
A01 primary protection
A30 overload protection
A01 Secondary protection
Compressor contactor
Fan contactor
Compressors
Fan motor
Thermal protection of compressor
Over load protector of fan motor
Main switch
3.57 WIRING DIAGRAM—RN250-325 (460-3-60-A, 400-3-50-A)
02250195-312-2
3.57 WIRING DIAGRAM—RN250-325 (460-3-60-A, 400-3-50-A)
COMP DESCRIPTION
F10
F11
Control circuit protection
Economizer protection
K01 Compressor motor relay
K10 Fan motor relay
K30 Economizer relay
P01 Thermal protection of compressor
P10 Thermal protection of fan
S02-1 Start button on control panel
S02-2 Remote control start button
S03-1 Stop button on control panel
S03-2 Remote control stop button
S10 Fan high pressure control switch
S11 High pressure safety control switch
S20 Safety thermostat
S30 Fan protector
A10-1 Running lamp on control panel (Green)
A10-2 Remote control running lamp (Green)
A11-1 Stand-by lamp on control panel (red)
A11-2 Remote control Stand-by lamp (red)
A20 Drain timer supply
EMR4 Phase protection relay
AL Alarm contact
3.58 CONTROL CIRCUIT—RN250-325
02250195-306
3.58 CONTROL CIRCUIT—RN250-325
COMP DESCRIPTION
A01 Control circuit transformer
A10-1 Running lamp on control
A10-2 Remote control Running lamp (Green)
A10-3 Dual button control lamp (Green)
A11-1 Stand-by lamp on control panel (red)
A11-2 Remote control Stand-by lamp (red)
A20 Drain valve
K01-1 Free of potential contact on relay
EMR4 Phase protection relay
F10 Control circuit protection
F11 Drain valve protection
K01 Compressor motor relay
K10 Fan motor relay
K20 Main relay
P01 Thermal protection of compressor
P10 Thermal protection of fan
RL1
RL2
ESD2 contact
ESD2 alarm contact
S02-1 Start button on control panel
S02-2 Remote control start button
S03-1 Stop button on control panel
S03-2 Remote control stop button
S04 Remote control switch
S10 Fan pressure control
COMP
S11 HP-BP security control
S20 Security thermostat
S30-1 Fan protector I
S30-2 Fan protector II
DESCRIPTION
3.59 POWER CIRCUIT—RN250-325
02250195-306
3.59 POWER CIRCUIT—RN250-325
COMP DESCRIPTION
A01 Control circuit transformer
A30 Compressor chankaser heater
B01 Main terminal block
EMR4 Phase protection relay
F1,F2 A01 Primary protection
K01 Compressor contactor (24V)
K10 Fan contactor (24V)
K40 Water motor
M01 Compressor
M10 Fan motor
P01 Thermal protection of
P10 Overload protector
P40 Water motor protection
S01 Main switch
PRODUCT USER MANUAL
3.60.1 M AINTENANCE BY AN E NGINEER /
T ECHNICIAN
1. Maintenance and repairs should only be performed when the air dryer is shut down and depressurized and when the main power switch is turned OFF.
2. Use only the appropriate tools for maintenance and repair.
3. Before dismantling any part that has been pressurized, disconnect the pressure sources and depressurize the system completely. Shut off all valves and isolate the dryer.
4. Proceed carefully during maintenance and repair. Prevent dirt from entering by covering parts and orifices with a clean cloth, paper or tape.
5. Receiver tanks should never be welded or modified in any way.
6. Never leave tools, loose parts or cleaning rags in or on the air dryer.
7. Before connecting the dryer back online, check the setting of the control and safety devices as well as the pressure and the temperature of the compressed air circuit.
8. For dryers with water-cooled condensers—
End caps of water condenser can be disassembled for cleaning with help of a water jet.
SECTION 3
3.60.2 M AINTENANCE BY THE USER
1. Keep the dryer clean.
2. In case of more than 4 pounds of refrigerant, the dryer should be regularly checked to be leak free by qualified refrigerant engineer. Refer to section “Environmental protection” of this manual.
3. Every six months - check the correct operation of the condenser drain trap. Replace timer or solenoid valve in case of clogging or malfunctioning.
4. Every six months - check and clean the drain strainer or the electronic sensor by undoing the access screw and rinsing the filter with tap water to remove the trapped dirt from the inside.
5. Clean the air condenser with a brush or compressed air as soon as it’s dirty or clogged.
Take extra care not to bend the fins of the condenser heat exchanger.
6. Check the troubleshooting list in case of maintenance issues.
7. Check operating pressures, temperatures and time settings after maintenance. If operating and safety devices function properly, the air dryer may be used.
8. For water-cooled condensers—Use only clean water when cleaning the condenser.
Water should be jet-streamed from the outlet side to the inlet side.
Table 3-1: Recommended Maintenance
Recommended Maintenance Activity
Air Condenser Cleaning
Water condenser cleaning
Replacement of Filter Element
Refrigerant Gas Leak
(for dryers containing more then 4 lb of gas)
Refrigerant Gas Leak
(for dryers containing more then 66 lb of gas)
Drain control
126
Weekly Monthly
X
Semi-
Annual
X
Annual
X
X
X
X
SECTION 3
Table 3-1: Recommended Maintenance
Recommended Maintenance Activity
Cleaning drain strainer inside drain ball valve
Cleaning or replacing drain membrane valve
(250CFM and larger models)
Monitoring working conditions
PRODUCT USER MANUAL
Weekly Monthly
Semi-
Annual
X
X
X
Annual
6
10
9
7
12
5
11
8
127
PRODUCT USER MANUAL SECTION 3
Problem
Dryer is switched on, indicator light is lit but the refrigerant compressor does not turn on.
Possible Cause
3-phase dryers: The connection has inverted phases
Refrigeration unit is not functioning
The refrigerant high pressure protection has tripped
Repair
Invert two phases
Check refrigeration compressor
The refrigerant safety high pressure switch has tripped.
Comments
3-phase dryers are equipped with a phase controller to avoid the fans from turning in the opposite direction.
Several factors can cause compressor failure. A qualified refrigeration technician needs to check all the electrical and refrigerant circuit and controls.
The dryer is protected against excessively high refrigerant pressure. If the condenser efficiency has reduced, the switch will trip.
Excessive ambient temperature
Dryer is switched on, indicator light is lit but the refrigerant compressor does not turn on.
Excessive temperature on crankcase of compressor.
Excessive compressed air inlet temperature.
In case of water cooled condensers, check the water control valve
Be sure that dryer is working in temperatures lower than the design conditions. Designed conditions and correction factors are described in this manual .
Allow time to compressor to cool down. Reason may be a possible maladjustment of hot gas bypass or shortage of refrigerant
Be sure that dryer is working in temperatures lower than design conditions.
1-phase dryer : manually reset the switch (green button)
3-phase dryer : pressure Switch will automatically reset.
A high ambient temperature may cause the refrigerant system to operate at higher than normal pressures. Results will be higher than normal evaporator temperature. Important: adequate air circulation around the dryer, and proper ventilation in the equipment room should guarantee a low enough ambient temperature.
Compressor is protected against overly high temperatures of the crankcase by a thermal switch called “Klixon”.
Klixon can be located internally in the refrigerant compressor or under the protective cover with the electrical connections to the compressor.
The dryer is designed for working into calculated conditions (see description in this manual). If conditions are exceeded, the dryer will be overflowed, dew point will go up and protecting devices can switch off.
128
SECTION 3 PRODUCT USER MANUAL
Problem
Dryer-on light is lit but
Refrigerant Compressor does not run.
Possible Cause
Clogged condenser fins or clogged water condenser.
Possible high crankcase temperature
Possible loss of phase
Possible low voltage causing overload trip
Possible failed compressor
Too much compressed air flow.
Repair
Clear fins or water condenser of all obstructions.
Check actual flow through the dryer.
Comments
The clogged fins in the condenser will restrict the air passage and reduce the refrigeration capacity, causing high temperature in the evaporator. Same will occur if water condenser is clogged with mud or dirt. Air condenser and water condenser should be periodically checked and cleaned. Protect water circuit by an adapted filter.
Faulty electrical wiring
One electrical protection has tripped.
Inspect the circuit
Reset the protection or replace the blown fuse.
Dryer-on light is lit but fan is not running.
When compressor starts, it vibrates a lot and makes mechanical noise.
Fan has to run if refrigerant high pressure reaches upper set point.
Compressor is slugging liquid refrigerant at startup.
Check that compressed air flows through the dryer. Check that fan blades are free to move. Check the fan pressure switch.
Be sure the pre-heating period of at least4 hours is respected for dryers equipped with a crankcase heater.
This dryer is designed for a maximum air flow at design conditions. If too much air is pumped into the dryer, water removal capacity may not be sufficient, resulting in liquid carryover downstream. Check the rated output the air compressor.
The compressor-on light should be wired into the refrigerant compressor circuit. See wiring diagram in chapter ??rawings?
of this manual.
The dryer is protected against high amp draw by fuse and/or overload relay that can trip in case of need. Reset or replace fuse once, but do not persist if it trips again, request assistance from a qualified refrigeration contractor.
Fan operates automatically to keep refrigerant pressure below the maximum value. The fan can stop if pressure is under the recommended setting.
Refrigerant may move between receivers when refrigerant compressor is stopped and not heated, especially if stopped for a long time. This migration may cause liquid shock (slugging) in valves specially on large dryers containing more refrigerant.
129
PRODUCT USER MANUAL
Problem
Water in system
SECTION 3
Possible Cause
Inlet and outlet connections are reversed. (compressed air?)
Drain system is clogged or inoperative.
Bypass system is open
Free moisture remains in pipe lines.
Excessive air flow
Repair
Check inlet and outlet connections.
Restore a free flow of water condensate.
Check water evacuation.
Check the valves
Blow out the system
Check actual flow through the dryer.
Comments
This dryer is designed for air flow in one direction only. Inlet and outlet directions are identified on the dryer.
Drain system may be a timed solenoid valve, pneumatically assisted or zero loss drain which has to be adjusted in accordance with values listed in this the maintenance manual.
The Solenoid valve includes a strainer that has to be periodically checked and cleaned. Membranes of pneumatically assisted drain have to be checked or replaced every 6 months. Sullair zero loss drain has to be cleaned with soft water when needed.
Important : Bypass piping should be installed around the dryer so the dryer can be isolated for service without shutting down the air supply. During dryer operation, valves must be set so all air goes into the system. Check tightness of the bypass system.
Before the dryer is first started all free moisture should be blown out of the system.
This dryer is designed for a maximum air flow. If too much air is pumped into the dryer, water removal capacity may not be sufficient, resulting in liquid Carryover downstream. Check the rated flow of the air compressor.
130
SECTION 3
Problem
Water in system
PRODUCT USER MANUAL
Possible Cause
Excessive compressed air inlet temperature.
Clogged condenser fins
Shortage of refrigerant
Refrigeration system is not functioning
Excessive pressure dew point
Repair
Excessive free moisture Check the separator
and drain system and compressor after cooler
ahead of the dryer.
Be sure that dryer is working lower than design conditions
Clear fins of all obstructions
Fix the leak and add a charge of refrigerant.
Check to be certain refrigerant compressor is running
Readjust refrigerant evaporating pressure
Comments
In some system there may be an accumulation of free moisture in the line ahead of the dryer. If this moisture is pumped into the dryer intermittently, the water removal capacity may not be sufficient. A water separator should be installed in the line before the dryer.
The dryer is designed for working into calculated design conditions.
Should the conditions be exceeded, the dryer will be overflowed, dew point will go up and protecting devices can switch off.
The clogged fins in the condenser will restrict air passage and reduce refrigerant capacity causing water downstream. Fins should be periodically checked and cleaned.
Loss of refrigerant will cause improper functioning. A qualified, refrigeration specialist should perform the necessary repairs, or factory should be contacted. if the units is in warranty.
To check if the compressor is running, check compressor-on light.
It is possible for the fan to be operating but not the compressor.
Compressor not running can be caused by several factors. A qualified refrigeration technician should check all refrigerant and electrical controls
The refrigerant pressure adjustment valve is identified by a label.
Turning the adjustment screw counter clockwise will decrease the refrigerant pressure. and lower the dew point. Adjust valves in 1/4 turn increments to allow 15 minutes for pressure stabilization with air flowing. Be sure that gauge indicates that pressures stay in green zone.
131
PRODUCT USER MANUAL SECTION 3
Problem
High pressure drop
The unit will not run or cycles off and on.
Possible Cause
Excessive compressed air flow or too low air inlet pressure.
Repair
Check actual pressure and flow through the dryer.
Comments
This dryer is designed for a maximum air flow. If too much air is pumped into the dryer, water removal capacity may not be sufficient, resulting in liquid carry-over downstream.
Check the rated flow of the air compressor.
Freeze up
Clogged heat exchanger
Line disconnect switch is open.
Fuse or breaker is open
Faulty refrigerant compressor or controls.
Check that compressor room ambient is above 41°F.
Fan switch could have failed in closed position keeping fan on.
Clean heat exchanger with a reverse air flow.
Frosting of the lines is an indication that controls are set too low.
The following should be done by an experienced refrigeration technician.
Controls may be adjusted in the fields by means of the hot gas bypass valve.
Turn screw clockwise to increase refrigerant pressure setting which will increase pressure dew point.
Turn screw in 1/2 turn increments until frost disappears. Allow 15 minutes for pressure stabilization with air flowing.
Dryer are supposed to be used with compressed air free of any aggressive contaminants. Some contamination may require extra maintenance of the heat exchanger. Contact your Sullair
Distributor.
Close the start or disconnect switch.
Replace fuse or reset breaker. The fuse to the power line should be checked and replaced if needed. Never replace a burnt fuse with an oversized fuse.
Determine the cause and make correction
If the dryer is not operating, check the disconnect switch or circuit breaker to be certain it is on.
Failure of compressor to run may be caused by several factors. A qualified refrigeration specialist should check all electrical and refrigeration controls, or factory should be contacted if unit is in warranty.
132
SECTION 3 PRODUCT USER MANUAL
Problem
The unit will not run or cycles off and on.
Err sign occurs on digital temperature control device
Possible Cause
Excessive compressed air inlet temperature.
Excessive ambient temperature
Clogged condenser fins
Shortage of refrigerant
The dew point is too low or too high.
Repair
Design conditions and correction factors are described in this manual.
Be sure that dryer is working in ambient temperatures below design conditions.
Designed conditions and correction factors are described in dryer . Be sure that dryer is working lower than design conditions.
Comments
The dryer is designed for working into calculated design conditions.
Should the conditions be exceeded, the dryer will be overflowed, dew point will go up and protecting devices may trip.
A high ambient temperature may cause the refrigerant system to operate at higher than normal pressures. Results will be a higher than normal evaporator temperature.
Important: there should be adequate air circulation around the dryer, and proper ventilation in the equipment room should guarantee a low enough ambient temperature.
Clear fins of all obstructions.
The clogged fins in the condenser will restrict the air passage and reduce the refrigeration capacity, causing high temperature in the evaporator.
Fins should be periodically checked and cleaned.
Fix the leak and add a charge of refrigerant.
Loss of refrigerant will cause improper functioning. 3-phase dryers are equipped with a temperature switch which maintains the amount of refrigerant to maintain proper cooling of the compressor.
A shortage of refrigerant may cause suction line to become very hot, causing the temperature switch to trip.
A qualified refrigeration specialist should perform the necessary repairs, or the factory should be contacted if the unit is in warranty.
Check refrigerant gas and make sure that the working conditions are within the correct range.
If there is not enough refrigerantgas or if the working temperatureand inlet temperatures are very high, the dew point will increase.
133
3.63 SETTINGS
MODEL
Superheat of thermostatic expansion valve
Evaporating pressure
Fan pressure switch
Security high pressure switch
Security low pressure switch
Refrigerant temperature switch
Drain timer
Water flow valve
(if water condenser)
C°
RN-0005 5-10°C
RN-0010 5-10°C
RN-0015 5-10°C
RN-0025 5-10°C
RN-0035 5-10°C
RN-0050 5-10°C
RN-0075 5-10°C
RN-0100 5-10°C
RN-0125 5-10°C
RN-0150 5-10°C
RN-0175 5-10°C
RN-0200 5-10°C
RN-0250 5-10°C
RN-0325 5-10°C
RD-0400 5-10°C
RD-0500 5-10°C
RD-0700 5-10°C
RD-0850 5-10°C
RD-1000 5-10°C
RD-1200 5-10°C
RD-1600 5-10°C
RD-2000 5-10°C
RD-2400 5-10°C
RD-3000 5-10°C
RD-3800 5-10°C
RD-5000 5-10°C
RD-6000 5-10°C
F° BAR PSI BAR PSI BAR PSI
41-50°F 2.05 bar 29.7 psi 9.0–12.0 bar 130.5-174.0 psi 25 bar 362 psi
41-50°F 2.05 bar 29.7 psi 9.0–12.0 bar 130.5-174.0 psi 25 bar 362 psi
41-50°F 2.05 bar 29.7 psi 9.0–12.0 bar 130.5-174.0 psi 25 bar 362 psi
41-50°F 2.05 bar 29.7 psi 9.0–12.0 bar 130.5-174.0 psi 25 bar 362 psi
41-50°F 2.05 bar 29.7 psi 9.0–12.0 bar 130.5-174.0 psi 25 bar 362 psi
41-50°F 2.05 bar 29.7 psi 9.0–12.0 bar 130.5-174.0 psi 25 bar 362 psi
41-50°F 2.05 bar 29.7 psi 9.0–12.0 bar 130.5-174.0 psi 25 bar 362 psi
41-50°F 2.05 bar 29.7 psi 9.0–12.0 bar 130.5-174.0 psi 25 bar 362 psi
41-50°F 2.05 bar 29.7 psi 9.0–12.0 bar 130.5-174.0 psi 25 bar 362 psi
BAR
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
PSI
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
41-50°F 2.05 bar 29.7 psi 9.0–12.0 bar 130.5-174.0 psi 25 bar 362 psi
41-50°F 2.05 bar 29.7 psi 9.0–12.0 bar 130.5-174.0 psi 25 bar 362 psi
41-50°F 2.05 bar 29.7 psi 9.0–12.0 bar 130.5-174.0 psi 25 bar 362 psi
41-50°F 2.05 bar 29.7 psi 9.0–12.0 bar 130.5-174.0 psi 25 bar 362 psi
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
41-50°F 2.05 bar 29.7 psi 9.0–12.0 bar 130.5-174.0 psi 25 bar 362 psi N/A N/A N/A
41-50°F 2.05 bar 29.7 psi 9.0–12.0 bar 130.5-174.0 psi 25 bar 362 psi 1.6 bar 23.2 psi 45°C
41-50°F 2.05 bar 29.7 psi 9.0–12.0 bar 130.5-174.0 psi 25 bar 362 psi 1.6 bar 23.2 psi 45°C
41-50°F 2.05 bar 29.7 psi 9.0–12.0 bar 130.5-174.0 psi 25 bar 362 psi 1.6 bar 23.2 psi 45°C
41-50°F 2.05 bar 29.7 psi 9.0–12.0 bar 130.5-174.0 psi 25 bar 362 psi 1.6 bar 23.2 psi 45°C
41-50°F 2.05 bar 29.7 psi 9.0–12.0 bar 130.5-174.0 psi 25 bar 362 psi 1.6 bar 23.2 psi 45°C
41-50°F 2.05 bar 29.7 psi 9.0–12.0 bar 130.5-174.0 psi 25 bar 362 psi 1.6 bar 23.2 psi 45°C
41-50°F 2.05 bar 29.7 psi 9.0–12.0 bar 130.5-174.0 psi 25 bar 362 psi 1.6 bar 23.2 psi 45°C
41-50°F 2.05 bar 29.7 psi 9.0–12.0 bar 130.5-174.0 psi 25 bar 362 psi 1.6 bar 23.2 psi 45°C
41-50°F 2.05 bar 29.7 psi 9.0–12.0 bar 130.5-174.0 psi 25 bar 362 psi 1.6 bar 23.2 psi 45°C
41-50°F 2.05 bar 29.7 psi 9.0–12.0 bar 130.5-174.0 psi 25 bar 362 psi 1.6 bar 23.2 psi 45°C
41-50°F 2.05 bar 29.7 psi 9.0–12.0 bar 130.5-174.0 psi 25 bar 362 psi 1.6 bar 23.2 psi 45°C
41-50°F 2.05 bar 29.7 psi 9.0–12.0 bar 130.5-174.0 psi 25 bar 362 psi 1.6 bar 23.2 psi 45°C
41-50°F 2.05 bar 29.7 psi 9.0–12.0 bar 130.5-174.0 psi 25 bar 362 psi 1.6 bar 23.2 psi 45°C
C°
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
113° F
113° F
113° F
113° F
113° F
113° F
113° F
113° F
N/A
N/A
N/A
N/A
N/A
113° F
113° F
113° F
113° F
113° F
F°
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
Open / Close BAR
4 sec / 5 min N/A
4 sec / 5 min
4 sec / 5 min
4 sec / 5 min
4 sec / 5 min
4 sec / 5 min
4 sec / 5 min
4 sec / 5 min
4 sec / 5 min
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
4 sec / 5 min
4 sec / 5 min
4 sec / 5 min
4 sec / 5 min
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
4 sec / 5 min N/A N/A
4 sec / 5 min 11 bar 159.5 psi
4 sec / 5 min 11 bar 159.5 psi
4 sec / 5 min 11 bar 159.5 psi
4 sec / 5 min 11 bar 159.5 psi
4 sec / 5 min 11 bar 159.5 psi
4 sec / 5 min 11 bar 159.5 psi
4 sec / 5 min 11 bar 159.5 psi
4 sec / 5 min 11 bar 159.5 psi
4 sec / 5 min 11 bar 159.5 psi
4 sec / 5 min 11 bar 159.5 psi
4 sec / 5 min 11 bar 159.5 psi
4 sec / 5 min 11 bar 159.5 psi
4 sec / 5 min 11 bar 159.5 psi
PSI
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
Table 3-2: DP Power 60H
GROUP
STANDARD
VOLTAGE
Capacity SCFM @
Rated Conditions
AIR COOLED MODEL
REF
SULLAIR PART
WATER COOLED
MODEL REF
SULLAIR PART
Rated
Flow
[1]
Pressure
Drop
Absorbed
Power
Port Size
115/1/60
115/1/60
115/1/60
115/1/60
208-230/1/60
115/1/60
208-230/1/60
115/1/60
208-230/1/60
115/1/60
208-230/1/60
115/1/60
208-230/1/60
115/1/60
208-230/1/60
115/1/60
208-230/1/60
208-230/1/60
208-230/1/60
Non-
Cycling
Non-
Cycling
Non-
Cycling
Non-
Cycling
Non-
Cycling
Non-
Cycling
Non-
Cycling
Non-
Cycling
Non-
Cycling
Non-
Cycling
Non-
Cycling
Non-
Cycling
Non-
Cycling
Non-
Cycling
Non-
Cycling
Non-
Cycling
Non-
Cycling
Non-
Cycling
Non-
Cycling
5.0
10.0
15.0
25.0
25.0
35.0
35.0
50.0
50.0
75.0
75.0
100.0
100.0
125.0
125.0
150.0
150.0
175.0
200.0
RN-0005-115-60-A
RN-0010-115-60-A
RN-0015-115-60-A
RN-0025-115-60-A
RN-0025-230-60-A
RN-0035-115-60-A
RN-0035-230-60-A
RN-0050-115-60-A
RN-0050-230-60-A
RN-0075-115-60-A
RN-0075-230-60-A
RN-0100-115-60-A
RN-0100-230-60-A
RN-0125-115-60-A
RN-0125-230-60-A
RN-0150-115-60-A
RN-0150-230-60-A
RN-0175-230-60-A
RN-0200-230-60-A
02250193-807
02250193-809
02250193-810
02250193-812
02250193-835
02250193-813
02250193-836
02250193-814
02250193-838
02250193-815
02250193-839
02250193-816
02250193-841
02250193-817
02250193-842
02250193-818
02250193-843
02250193-845
02250193-846
2.5
2.5
2.3
2.3
2.2
2.2
2.4
2.4
2.6
2.6
3.1
3.3
2
2
1.9
1.9
(psid)
1.2
1.5
1.7
100.0
100.0
125.0
125.0
50.0
50.0
75.0
75.0
150.0
150.0
175.0
200.0
25.0
25.0
35.0
35.0
scfm
5.0
10.0
15.0
3/4" NPT-F
3/4" NPT-F
3/4" NPT-F
3/4" NPT-F
3/4" NPT-F
3/4" NPT-F
1-1/2" NPT-F
1-1/2" NPT-F
(in)
1/2" NPT-F
1/2" NPT-F
1/2" NPT-F
1/2" NPT-F
1/2" NPT-F
1/2" NPT-F
1/2" NPT-F
1-1/2" NPT-F
1-1/2" NPT-F
1-1/2" NPT-F
1-1/2" NPT-F
0.95
0.95
0.99
0.99
0.67
0.67
0.85
0.85
1.05
1.05
1.15
1.25
0.28
0.28
0.33
0.33
(kW)
0.14
0.25
0.25
Table 3-2: DP Power 60H
GROUP
STANDARD
VOLTAGE
Capacity SCFM @
Rated Conditions
AIR COOLED MODEL
REF
SULLAIR PART
WATER COOLED
MODEL REF
SULLAIR PART
Rated
Flow
[1]
Pressure
Drop
Absorbed
Power
Port Size
460/3/60
575/3/60
230/3/60
460/3/60
575/3/60
230/3/60
460/3/60
575/3/60
208-230/1/60
230/3/60
460/3/60
575/3/60
230/3/60
460/3/60
575/3/60
230/3/60
230/3/60
460/3/60
575/3/60
460/3/60
Non-
Cycling
Non-
Cycling
Non-
Cycling
Non-
Cycling
Non-
Cycling
Non-
Cycling
Non-
Cycling
Non-
Cycling
Non-
Cycling
Non-
Cycling
Non-
Cycling
Non-
Cycling
Non-
Cycling
Non-
Cycling
Non-
Cycling
Non-
Cycling
Non-
Cycling
Non-
Cycling
Non-
Cycling
Non-
Cycling
250.0
250.0
250.0
250.0
325.0
325.0
325.0
400.0
400.0
400.0
500.0
500.0
500.0
700.0
700.0
700.0
850.0
850.0
850.0
1000.0
RN-0250-230-60-A
RN-0250-230-60-A
RN-0250-460-60-A
RN-0250-575-60-A
RN-0325-230-60-A
RN-0325-460-60-A
RN-0325-575-60-A
RD-0400-230-60-A
RD-0400-460-60-A
RD-0400-575-60-A
RD-0500-230-60-A
RD-0500-460-60-A
RD-0500-575-60-A
RD-0700-230-60-A
RD-0700-460-60-A
RD-0700-575-60-A
RD-0850-230-60-A
RD-0850-460-60-A
RD-0850-575-60-A
RD-1000-460-60-A
02250193-880
02250193-880
02250193-979
02250194-134
02250193-848
02250193-980
02250194-135
02250193-849
02250193-981
02250194-136
02250193-850
02250193-982
02250194-137
02250193-851
02250193-983
02250194-138
02250193-852
02250193-984
02250194-139
02250193-985
RD-0700-230-60-W
RD-0700-460-60-W
RD-0700-575-60-W
RD-0850-230-60-W
RD-0850-460-60-W
RD-0850-575-60-W
RN-1000-460-60-W
3.9
3.9
3.9
3.1
3.2
2.7
2.7
2.7
(psid)
3.5
3.5
3.5
3.5
3.2
3.2
3.1
3.1
2.4
2.4
2.4
2.8
02250193-861
02250194-107
02250194-161
02250193-862
02250194-108
02250194-162 850.0
02250194-109 1000.0
700.0
700.0
850.0
850.0
500.0
500.0
500.0
700.0
325.0
400.0
400.0
400.0
scfm
250.0
250.0
250.0
250.0
325.0
325.0
(in)
1-1/2" NPT-F
1-1/2" NPT-F
1-1/2" NPT-F
1-1/2" NPT-F
2" NPT-F
2" NPT-F
2" NPT-F
2" NPT-F
2" NPT-F
2" NPT-F
2" NPT-F
2" NPT-F
2" NPT-F
3" NPT-M
3" NPT-M
3" NPT-M
3" NPT-M
3" NPT-M
3" NPT-M
3" NPT-M
2.35
2.35
2.35
3.45
1.67
1.92
1.92
1.92
(kW)
1.5
1.5
1.5
1.5
1.67
1.67
3.45
3.45
3.53
3.53
3.53
3.64
Table 3-2: DP Power 60H
GROUP
STANDARD
VOLTAGE
Capacity SCFM @
Rated Conditions
AIR COOLED MODEL
REF
SULLAIR PART
WATER COOLED
MODEL REF
SULLAIR PART
Rated
Flow
[1]
Pressure
Drop
Absorbed
Power
Port Size
Non-
Cycling
Non-
Cycling
Non-
Cycling
Non-
Cycling
Non-
Cycling
Non-
Cycling
Non-
Cycling
Non-
Cycling
Non-
Cycling
Non-
Cycling
Non-
Cycling
Non-
Cycling
Non-
Cycling
Non-
Cycling
Non-
Cycling
Non-
Cycling
Non-
Cycling
575/3/60
460/3/60
575/3/60
460/3/60
575/3/60
460/3/60
575/3/60
460/3/60
575/3/60
575/3/60
460/3/60
575/3/60
460/3/60
575/3/60
460/3/60
575/3/60
460/3/60
1000.0
1220.0
1250.0
1600.0
1600.0
2000.0
2000.0
2500.0
2500.0
3000.0
3000.0
3800.0
3800.0
5000.0
5000.0
6000.0
6000.0
RD-1000-575-60-A
RD-1200-460-60-A
RD-1200-575-60-A
RD-1600-460-60-A
RD-1600-575-60-A
RD-2000-460-60-A
RD-2000-575-60-A
RD-2400-460-60-A
RD-2400-575-60-A
RD-3000-460-60-A
RD-3000-575-60-A
RD-3800-460-60-A
RD-3800-575-60-A
RD-5000-460-60-A
RD-5000-575-60-A
RD-6000-460-60-A
RD-6000-575-60-A
02250194-140
02250193-986
02250194-141
02250193-988
02250194-142
02250193-989
02250194-143
02250193-990
02250194-144
02250193-991
02250194-145
02250193-992
02250194-146
02250193-993
02250194-147
02250193-994
02250194-148
RD-1000-575-60-W
RD-1200-460-60-W
RD-1200-575-60-W
RD-1600-460-60-W
RD-1600-575-60-W
RD-2000-460-60-W
RD-2000-575-60-W
RD-2400-460-60-W
RD-2400-575-60-W
RD-3000-460-60-W
RD-3000-575-60-W
RD-3800-460-60-W
RD-3800-575-60-W
RD-5000-460-60-W
RD-5000-575-60-W
RD-6000-460-60-W
RD-6000-575-60-W scfm
02250194-163 1000.0
02250194-110 1250.0
02250194-164 1250.0
02250194-113 1600.0
02250194-165 1600.0
02250194-114 2000.0
02250194-166 2000.0
02250194-115 2500.0
02250194-167 2500.0
02250194-116 3000.0
02250194-168 3000.0
02250194-117 3800.0
02250194-169 3800.0
02250194-118 5000.0
02250194-170 5000.0
02250194-119 6000.0
02250194-171 6000.0
2.6
2.8
2.8
3.5
3.4
3.2
3.2
2.6
3.5
3.5
3.5
(psid)
2.8
2.95
2.95
3.1
3.1
3.4
4" FLG
6" FLG
6" FLG
6" FLG
6" FLG
6" FLG
6" FLG
8" FLG
(in)
3" NPT-M
3" NPT-M
3" NPT-M
4" FLG
4" FLG
4" FLG
8" FLG
8" FLG
8" FLG
12.25
14.62
14.62
18.78
7.72
9.22
9.22
12.25
(kW)
3.64
4.65
4.65
5.45
5.45
7.72
18.78
22.27
22.27
Table 3-3: DP Power 50H
GROUP
220/1/50
400/3/50
400/3/50
400/3/50
400/3/50
400/3/50
400/3/50
400/3/50
400/3/50
400/3/50
400/3/50
400/3/50
400/3/50
400/3/50
220/1/50
220/1/50
220/1/50
220/1/50
220/1/50
220/1/50
220/1/50
220/1/50
220/1/50
220/1/50
Non-Cycling
Non-Cycling
Non-Cycling
Non-Cycling
Non-Cycling
Non-Cycling
Non-Cycling
Non-Cycling
Non-Cycling
Non-Cycling
Non-Cycling
Non-Cycling
Non-Cycling
Non-Cycling
Non-Cycling
Non-Cycling
Non-Cycling
Non-Cycling
Non-Cycling
Non-Cycling
Non-Cycling
Non-Cycling
Non-Cycling
Non-Cycling
STANDARD
VOLTAGE
Capacity SCFM @
Rated Conditions
AIR COOLED MODEL
REF
SULLAIR PART
WATER COOLED
MODEL REF
SULLAIR PART
Rated
Flow
[1]
Pressure
Drop
Absorbe d Power
Port Size
15.0
25.0
35.0
50.0
75.0
100.0
125.0
175.0
200.0
250.0
325.0
400.0
500.0
700.0
850.0
1000.0
1200.0
1600.0
2000.0
2400.0
3000.0
3800.0
5000.0
6000.0
RN-0015-220-50-A
RN-0025-220-50-A
RN-0035-220-50-A
RN-0050-220-50-A
RN-0075-220-50-A
RN-0100-220-50-A
RN-0125-220-50-A
RN-0175-220-50-A
RN-0200-220-50-A
RN-0250-220-50-A
RN-0325-220-50-A
RD-0400-400-50-A
RD-0500-400-50-A
RD-0700-400-50-A
RD-0850-400-50-A
RD-1000-400-50-A
RD-1200-400-50-A
RD-1600-400-50-A
RD-2000-400-50-A
RD-2400-400-50-A
RD-3000-400-50-A
RD-3800-400-50-A
RD-5000-400-50-A
RD-6000-400-50-A
02250193-869
02250193-870
02250193-871
02250193-872
02250193-873
02250193-874
02250193-875
02250193-876
02250193-877
02250193-878
02250193-879
02250193-917
02250193-918
02250193-919
02250193-920
02250193-921
02250193-922
02250193-923
02250193-924
02250193-925
02250193-926
02250193-927
02250193-928
02250193-929
RD-0700-400-50-W
RD-0850-400-50-W
RD-1000-400-50-W
RD-1200-400-50-W
RD-1600-400-50-W
RD-2000-400-50-W
RD-2400-400-50-W
RD-3000-400-50-W
RD-3800-400-50-W
RD-5000-400-50-W
RD-6000-400-50-W
325.0
400.0
02250193-947
02250193-948
500.0
700.0
850.0
02250193-949 1000.0
02250193-950 1200.0
02250193-951 1600.0
02250193-953 2000.0
02250193-954 2400.0
02250193-955 3000.0
02250193-956 3800.0
02250193-958 5000.0
02250193-959 6000.0
scfm
15.0
25.0
35.0
50.0
75.0
100.0
125.0
175.0
200.0
250.0
2.5
2.5
2.8
2.8
3.5
3.5
2.8
3.1
3.5
3.1
3.2
3.4
3.9
2.5
(psid)
1.7
1.9
2.3
3.1
3.3
3.5
2
2.2
2.4
2.5
2" NPT-F
2" NPT-F
2" NPT-F
3" NPT-M
3" NPT-M
3" NPT-M
3" NPT-M
4" FLG
4" FLG
6" FLG
6" FLG
6" FLG
8" FLG
8" FLG
(in)
1/2" NPT-F
1/2" NPT-F
1/2" NPT-F
3/4" NPT-F
3/4" NPT-F
3/4" NPT-F
1-1/2" NPT-F
1-1/2" NPT-F
1-1/2" NPT-F
1-1/2" NPT-F
7.72
9.22
12.25
14.62
18.78
22.27
3.64
3.64
4.5
5.54
1.67
1.92
2.35
3.45
(kW)
0.13
0.17
0.85
1.15
1.25
1.5
0.25
0.33
0.49
0.78
50.0
75.0
75.0
100.0
100.0
125.0
125.0
150.0
25.0
35.0
35.0
50.0
5.0
10.0
15.0
25.0
150.0
175.0
200.0
250.0
250.0
250.0
250.0
325.0
Non-
Cycling
Non-
Cycling
Non-
Cycling
Non-
Cycling
115/1/60
115/1/60
115/1/60
115/1/60
Non-
Cycling 208-230/1/60
Non-
Cycling
115/1/60
Non-
Cycling 208-230/1/60
Non-
Cycling
115/1/60
Non-
Cycling 208-230/1/60
Non-
Cycling
115/1/60
Non-
Cycling 208-230/1/60
Non-
Cycling
115/1/60
Non-
Cycling 208-230/1/60
Non-
Cycling
115/1/60
Non-
Cycling 208-230/1/60
Non-
Cycling
115/1/60
Non-
Cycling 208-230/1/60
Non-
Cycling 208-230/1/60
Non-
Cycling 208-230/1/60
Non-
Cycling 208-230/1/60
Non-
Cycling
Non-
Cycling
Non-
Cycling
Non-
Cycling
230/3/60
460/3/60
575/3/60
230/3/60
Table 3-4: Models 60HZ
Capacity
SCFM @
Rated
Conditions
AIR COOLED
MODEL REF
RN-0005-115-1-60-A 02250193-807
RN-0010-115-1-60-A 02250193-809
RN-0015-115-1-60-A 02250193-810
RN-0025-115-1-60-A 02250193-812
RN-0025-230-1-60-A 02250193-835
RN-0035-115-1-60-A 02250193-813
RN-0035-230-1-60-A 02250193-836
RN-0050-115-1-60-A 02250193-814
RN-0050-230-1-60-A 02250193-838
RN-0075-115-1-60-A 02250193-815
RN-0075-230-1-60-A 02250193-839
RN-0100-115-1-60-A 02250193-816
RN-0100-230-1-60-A 02250193-841
RN-0125-115-1-60-A 02250193-817
RN-0125-230-1-60-A 02250193-842
RN-0150-115-1-60-A 02250193-818
RN-0150-230-1-60-A 02250193-843
RN-0175-230-1-60-A 02250193-845
RN-0200-230-1-60-A 02250193-846
RN-0250-230-1-60-A 02250193-880
RN-0250-230-3-60-A 02250193-880
RN-0250-460-3-60-A 02250193-979
RN-0250-575-3-60-A 02250194-134
RN-0325-230-3-60-A 02250193-848
SULLAIR
PART
WATER
COOLED
MODEL REF
SULLAIR
PART
Rated
Flow
[1]
Pressure
Drop
Absorbed
Power
Port Size
150.0
150.0
175.0
200.0
250.0
250.0
250.0
250.0
325.0
100.0
100.0
125.0
125.0
50.0
50.0
75.0
75.0
25.0
25.0
35.0
35.0
scfm (psid)
5.0
1.2
10.0
15.0
1.5
1.7
1.9
1.9
2
2
2.5
2.5
2.3
2.3
2.2
2.2
2.4
2.4
3.5
3.5
3.5
3.5
3.2
2.6
2.6
3.1
3.3
0.46
0.46
0.56
0.56
0.21
0.21
0.43
0.43
0.2
0.2
0.2
0.2
(kW)
0.16
0.16
0.16
1.25
1.73
1.34
1.3
1.73
0.56
0.56
0.79
0.88
Width Height
28.9
28.9
31.7
31.7
23.6
23.6
28.9
28.9
24.0
24.0
23.6
23.6
in
24.0
24.0
24.0
49.6
49.6
49.6
49.6
49.6
31.7
31.7
34.3
34.3
(in) in mm
1/2" NPT 13.8
350
1/2" NPT 13.8
350
1/2" NPT 13.8
350
1/2" NPT 13.8
350
1/2" NPT 13.8
350
1/2" NPT 15.8
400
1/2" NPT 15.8
400
3/4" NPT 15.8
400
3/4" NPT 15.8
400
3/4" NPT 15.4
390
3/4" NPT 15.4
390
3/4" NPT 15.4
390
3/4" NPT 15.4
390
1-1/2" NPT 17.5
445
1-1/2" NPT 17.5
445
1-1/2" NPT 17.5
445
1-1/2" NPT 17.5
445
1-1/2" NPT 21.5
545
1-1/2" NPT 21.5
545
1-1/2" NPT 23.5
595
1-1/2" NPT 23.5
595
1-1/2" NPT 23.5
595
1-1/2" NPT 23.5
595
2" NPT 23.5
595
Depth Weight mm in mm lbs
610 13.8 350 70.4
610 13.8 350 70.4
610 13.8 350 70.4
610 15.5 395 73.7
33.5
610 15.5 395 73.7
33.5
600 17.7 450 93.5
42.5
600 17.7 450 93.5
42.5
kg
32
32
32
600 17.7 450 93.5
42.5
600 17.7 450 93.5
42.5
735 17.5 445 124.3 56.5
735 17.5 445 124.3 56.5
735 17.5 445 145.2
66
735 17.5 445 145.2
66
805 21.5 545 176
805 21.5 545 176
80
80
805 23.5 595 193.6
88
805 23.5 595 193.6
88
870 23.5 595 216.7 98.5
870 23.5 595 216.7 98.5
1260 28.3 718 308 140
1260 28.3 718 308 140
1260 28.3 718 308 140
1260 28.3 718 308 140
1260 28.3 718 308 140
Non-
Cycling
Non-
Cycling
Non-
Cycling
Non-
Cycling
Non-
Cycling
Non-
Cycling
Non-
Cycling
Non-
Cycling
Non-
Cycling
Non-
Cycling
Non-
Cycling
Non-
Cycling
Non-
Cycling
Non-
Cycling
Non-
Cycling
Non-
Cycling
Non-
Cycling
Non-
Cycling
Non-
Cycling
Non-
Cycling
Non-
Cycling
Non-
Cycling
Non-
Cycling
Non-
Cycling
Non-
Cycling
Table 3-4: Models 60HZ
230/3/60
460/3/60
575/3/60
230/3/60
460/3/60
575/3/60
460/3/60
575/3/60
460/3/60
575/3/60
230/3/60
460/3/60
575/3/60
230/3/60
460/3/60
575/3/60
460/3/60
575/3/60
460/3/60
575/3/60
460/3/60
575/3/60
460/3/60
575/3/60
460/3/60
700.0
700.0
700.0
850.0
850.0
850.0
1000.0
1000.0
325.0
325.0
400.0
400.0
400.0
500.0
500.0
500.0
1250.0
1250.0
1600.0
1600.0
2000.0
2000.0
2500.0
2500.0
3000.0
Capacity
SCFM @
Rated
Conditions
AIR COOLED
MODEL REF
SULLAIR
PART
RN-0325-460-3-60-A 02250193-980
RN-0325-575-3-60-A 02250194-135
RD-0400-230-3-60-A 02250193-849
RD-0400-460-3-60-A 02250193-981
RD-0400-575-3-60-A 02250194-136
RD-0500-230-3-60-A 02250193-850
RD-0500-460-3-60-A 02250193-982
RD-0500-575-3-60-A 02250194-137
WATER
COOLED
MODEL REF
SULLAIR
PART
Rated
Flow
[1]
Pressure
Drop
Absorbed
Power
Port Size
500.0
500.0
02250193-861 700.0
02250194-107 700.0
02250194-161 700.0
02250193-862 850.0
02250194-108 850.0
02250194-162 850.0
scfm (psid)
325.0
325.0
3.2
3.2
400.0
400.0
400.0
500.0
2.7
2.7
2.7
3.9
3.1
2.4
2.4
2.4
3.9
3.9
3.1
3.1
02250194-109 1000.0
02250194-163 1000.0
2.8
2.8
02250194-110 1250.0
2.95
02250194-164 1250.0
2.95
02250194-113 1600.0
02250194-165 1600.0
02250194-114 2000.0
02250194-166 2000.0
3.1
3.1
3.4
3.4
02250194-115 2500.0
02250194-167 2500.0
02250194-116 3000.0
3.2
3.2
2.6
7.3
7.2
9
8.8
5.28
5.12
5.28
5.12
9.8
9.6
11.2
3.7
4.38
4.48
4.4
2.88
2.6
3.92
3.88
(kW)
2.08
1.98
2.13
2.19
2.1
2.7
Width Height
(in) in mm
2" NPT 23.5
595
2" NPT 23.5
595
2" NPT 23.5
595
2" NPT 23.5
595
2" NPT 23.5
595
2" NPT 31.9
810
2" NPT 31.9
810
2" NPT 31.9
810
3" NPT 31.9
810
3" NPT 31.9
810
3" NPT 31.9
810
3" NPT 31.9
810
3" NPT 31.9
810
3" NPT 31.9
810
3" NPT 31.9
810
3" NPT 31.9
810
3" NPT 31.9
810
3" NPT 31.9
810
4" FLG 45.9
1166 79.9
4" FLG 45.9
1166 79.9
4" FLG 45.9
1166 79.9
4" FLG 45.9
1166 79.9
73.8
73.8
73.8
73.8
6" FLG 45.9
1166 79.9
6" FLG 45.9
1166 79.9
6" FLG 45.9
1166 79.9
58.9
58.9
58.9
58.9
58.9
58.9
58.9
58.9
in
49.6
49.6
49.6
49.6
49.6
58.9
Depth Weight mm in mm lbs kg
1260 28.3 718 341 155
1260 28.3 718 341 155
1260 28.3 718 341 155
1260 28.3 718 341 155
1260 28.3 718 341 155
1495 45.9 1166 1056 480
1495 45.9 1166 1056 480
1495 45.9 1166 1056 480
1495 45.9 1166 1056 480
1495 45.9 1166 1056 480
1495 45.9 1166 1056 480
1495 45.9 1166 1100 500
1495 45.9 1166 1100 500
1495 45.9 1166 1100 500
1875 45.9 1166 1122 510
1875 45.9 1166 1122 510
1875 45.9 1166 1122 510
1875 45.9 1166 1122 510
2030 61.0 1550 1672 760
2030 61.0 1550 1672 760
2030 61.0 1550 1705 775
2030 61.0 1550 1705 775
2030 82.7 2100 1925 875
2030 82.7 2100 1925 875
2030 82.7 2100 2156 980
Table 3-4: Models 60HZ
Capacity
SCFM @
Rated
Conditions
AIR COOLED
MODEL REF
Non-
Cycling
Non-
Cycling
Non-
Cycling
Non-
Cycling
Non-
Cycling
Non-
Cycling
Non-
Cycling
575/3/60
460/3/60
575/3/60
460/3/60
575/3/60
460/3/60
575/3/60
3000.0
3800.0
3800.0
5000.0
5000.0
6000.0
6000.0
SULLAIR
PART
WATER
COOLED
MODEL REF
SULLAIR
PART
Rated
Flow
[1]
Pressure
Drop
Absorbed
Power
Port Size scfm (psid)
02250194-168 3000.0
02250194-117 3800.0
2.6
2.8
02250194-169 3800.0
02250194-118 5000.0
02250194-170 5000.0
02250194-119 6000.0
02250194-171 6000.0
2.8
3.5
3.5
3.5
3.5
(kW)
11
13.9
13.7
18.2
18
22.27
22.27
Width Height
(in) in mm in
6" FLG 45.9
1166 79.9
6" FLG 45.9
1166 79.9
6" FLG 45.9
1166 79.9
8" FLG 45.9
1166 79.9
8" FLG 45.9
1166 79.9
8" FLG 45.9
1166 79.9
8" FLG 45.9
1166 79.9
Depth Weight mm in mm lbs kg
2030 82.7 2100 2156 980
2030 110.3 2800 2409 1095
2030 110.3 2800 2409 1095
2030 110.3 2800 2420 1100
2030 110.3 2800 2420 1100
2030 118.1 3000 2750 1250
2030 118.1 3000 2750 1250
Table 3-5: Models 50Hz
GROUP
Non-Cycling 220/1/50
Non-Cycling 220/1/50
Non-Cycling 220/1/50
Non-Cycling 220/1/50
Non-Cycling 220/1/50
Non-Cycling 220/1/50
Non-Cycling 220/1/50
Non-Cycling 220/1/50
Non-Cycling 220/1/50
Non-Cycling 220/1/50
Non-Cycling 220/1/50
Non-Cycling 400/3/50
Non-Cycling 400/3/50
Non-Cycling 400/3/50
Non-Cycling 400/3/50
Non-Cycling DELETE
Non-Cycling 400/3/50
Non-Cycling 400/3/50
Non-Cycling 400/3/50
Non-Cycling 400/3/50
Non-Cycling 400/3/50
Non-Cycling 400/3/50
Non-Cycling 400/3/50
Non-Cycling 400/3/50
Non-Cycling 400/3/50
700.0
850.0
1000.0
1000.0
1200.0
200.0
250.0
325.0
400.0
500.0
15.0
25.0
35.0
50.0
75.0
100.0
125.0
175.0
1600.0
2000.0
2400.0
3000.0
3800.0
5000.0
6000.0
STANDARD
VOLTAGE
Capacity SCFM
@ Rated
Conditions
AIR COOLED MODEL
REF
SULLAIR
PART
WATER COOLED
MODEL REF
SULLAIR
PART scfm
RN-0015-220-3-50-A 02250193-869
RN-0025-220-3-50-A 02250193-870
RN-0035-220-3-50-A 02250193-871
RN-0050-220-3-50-A 02250193-872
RN-0075-220-3-50-A 02250193-873
RN-0100-220-3-50-A 02250193-874
RN-0125-220-3-50-A 02250193-875
RN-0175-220-3-50-A 02250193-876
RN-0200-220-3-50-A 02250193-877
RN-0250-220-3-50-A 02250193-878
RN-0325-220-3-50-A 02250193-879
RD-0400-400-3-50-A 02250193-917
RD-0500-400-3-50-A 02250193-918
RD-0700-400-3-50-A 02250193-919 RD-0700-400-3-50-W 02250193-947 700.0
RD-0850-400-3-50-A 02250193-920 RD-0850-400-3-50-W 02250193-948 850.0
RD-1000-230-3-50-A ?
1000.0
RD-1000-400-3-50-A 02250193-921 RD-1000-400-3-50-W 02250193-949 1000.0
RD-1200-400-3-50-A 02250193-922 RD-1200-400-3-50-W 02250193-950 1200.0
200.0
250.0
325.0
400.0
500.0
15.0
25.0
35.0
50.0
75.0
100.0
125.0
175.0
RD-1600-400-3-50-A 02250193-923 RD-1600-400-3-50-W 02250193-951 1600.0
RD-2000-400-3-50-A 02250193-924 RD-2000-400-3-50-W 02250193-953 2000.0
RD-2400-400-3-50-A 02250193-925 RD-2400-400-3-50-W 02250193-954 2400.0
RD-3000-400-3-50-A 02250193-926 RD-3000-400-3-50-W 02250193-955 3000.0
RD-3800-400-3-50-A 02250193-927 RD-3800-400-3-50-W 02250193-956 3800.0
RD-5000-400-3-50-A 02250193-928 RD-5000-400-3-50-W 02250193-958 5000.0
RD-6000-400-3-50-A 02250193-929 RD-6000-400-3-50-W 02250193-959 6000.0
(psid)
2.5
2.8
3.1
3.1
3.5
3.3
3.5
3.2
3.4
3.9
2.2
2.4
2.5
2.3
3.1
1.7
1.9
2
3.1
2.5
2.5
2.8
2.8
3.5
3.5
Rated
Flow
[1]
Pressure
Drop
Absorbed
Power
Port
Size
Width
(kW)
3.45
3.64
3.64
3.64
4.5
1.25
1.5
1.67
1.92
2.35
0.13
0.17
0.25
0.33
0.49
0.78
0.85
1.15
5.54
7.72
9.22
12.25
14.62
18.78
22.27
Height Depth Weight
(in) in mm in mm in mm lbs kg
3.64 SPARE PARTS LIST
Component Name
Refrigerant Gas compressor compressor electric box
Condenser
Fan motor
Fan Blade fan grill
Drier-Dehydrator
Heat Exchanger
Evaporator (water Heat
Exchanger)
Flexible steel tube (inlet)
Flexible steel tube (outlet)
Expansion valve
By-pass valve separator
Liquid Receiver
High Pressure Security switch
Fan on/off switch
Low pressure switch
Thermostatic switch
Water pressure Switch
Water pressure switch timer
Water pump contactor
Water pump
Water Tank
Water Gauge
Microprosessor
Fan Overload Protector
Compressor Overload Protector
Thermostatic Gauge
RN-0005-115-1-60-A
R134a
M-CMP-0015-115-1-60
N/A
M-CON-0015
M-FMT-0075-115-1-60
M-FAN-0015
M-GRL-0015
M-DRI-0200
M-EXC-0025
N/A
M-INL-0015
N/A
M-EXV-0075
N/A
N/A
N/A
M-HPS-0200
M-FNS-0200
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
M-COP-0015-115-1-60
M-THG-0325
RN-0010-115-1-60-A
R134a
M-CMP-0015-115-1-60
N/A
M-CON-0015
M-FMT-0075-115-1-60
M-FAN-0015
M-GRL-0015
M-DRI-0200
M-EXC-0025
N/A
M-INL-0015
N/A
M-EXV-0075
N/A
N/A
N/A
M-HPS-0200
M-FNS-0200
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
M-COP-0015-115-1-60
M-THG-0325
RN-0015-115-1-60-A
R134a
M-CMP-0015-115-1-60
N/A
M-CON-0015
M-FMT-0075-115-1-60
M-FAN-0015
M-GRL-0015
M-DRI-0200
M-EXC-0025
N/A
M-INL-0015
N/A
M-EXV-0075
N/A
N/A
N/A
M-HPS-0200
M-FNS-0200
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
M-COP-0015-115-1-60
M-THG-0325
RN-0015-220-1-50-A
R134a
M-CMP-0015-115-1-60
N/A
M-CON-0015
M-FMT-0035-220-1-50
M-FAN-0015
M-GRL-0015
M-DRI-0200
M-EXC-0025
N/A
M-INL-0015
N/A
M-EXV-0075
N/A
N/A
N/A
M-HPS-0200
M-FNS-0200
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
M-COP-0015-115-1-60
M-THG-0325
RN-0025-115-1-60-A
R134a
M-CMP-0035-115-1-60-A
N/A
M-CON-0035
M-FMT-0075-115-1-60
M-FAN-0075
M-GRL-0075
M-DRI-0200
M-EXC-0025
N/A
M-INL-0025
N/A
M-EXV-0075
N/A
N/A
N/A
M-HPS-0200
M-FNS-0200
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
M-COP-0035-115-1-60-A
M-THG-0325
Component Name
On/off Button
Main Switch
Contactor
Phase protection relay
Fan Contactor
Transformer
Secondary contact
Timer
Solenoid Valve
Membrane valve
Membrane
Water Separator
Cabinet Front
Cabinet Side - Left
Cabinet Side - Right
Cabinet Rear
Cabinet Top
Cabinet Base
Cabinette fastener
Cabinette Stud and Nut
Cabinet handle
Plastic Display cover
Cabinet Top Corners
Screws
Cage Nuts
Cabinet Legs
Cabinet Frame Top
Cabinette Horizontal profile 1
Cabinette Horizontal profile 2
M-CRE-0015
M-CTO-0015
M-CBA-0015
M-FAS-1000
M-STU-1000
M-CPS-1000
M-PDC-0200
M-CTC-1000
M-SCR-1000
M-NUT-1000
M-CBL-0015
M-FRT-0015
M-HP1-0015
M-HP2-0015
RN-0005-115-1-60-A
M-ONB-0200
N/A
N/A
N/A
N/A
N/A
N/A
M-TMR-3000
N/A
N/A
N/A
M-WSP-0050
M-CFR-0015
M-CLE-0015
M-CRI-0015
M-CRE-0015
M-CTO-0015
M-CBA-0015
M-FAS-1000
M-STU-1000
M-CPS-1000
M-PDC-0200
M-CTC-1000
M-SCR-1000
M-NUT-1000
M-CBL-0015
M-FRT-0015
M-HP1-0015
M-HP2-0015
RN-0010-115-1-60-A
M-ONB-0200
N/A
N/A
N/A
N/A
N/A
N/A
M-TMR-3000
N/A
N/A
N/A
M-WSP-0050
M-CFR-0015
M-CLE-0015
M-CRI-0015
M-CRE-0015
M-CTO-0015
M-CBA-0015
M-FAS-1000
M-STU-1000
M-CPS-1000
M-PDC-0200
M-CTC-1000
M-SCR-1000
M-NUT-1000
M-CBL-0015
M-FRT-0015
M-HP1-0015
M-HP2-0015
RN-0015-115-1-60-A
M-ONB-0200
N/A
N/A
N/A
N/A
N/A
N/A
M-TMR-3000
N/A
N/A
N/A
M-WSP-0050
M-CFR-0015
M-CLE-0015
M-CRI-0015
M-CRE-0015
M-CTO-0015
M-CBA-0015
M-FAS-1000
M-STU-1000
M-CPS-1000
M-PDC-0200
M-CTC-1000
M-SCR-1000
M-NUT-1000
M-CBL-0015
M-FRT-0015
M-HP1-0015
M-HP2-0015
RN-0015-220-1-50-A
M-ONB-0200
N/A
N/A
N/A
N/A
N/A
N/A
M-TMR-3000
N/A
N/A
N/A
M-WSP-0050
M-CFR-0015
M-CLE-0015
M-CRI-0015
M-CRE-0025
M-CTO-0025
M-CBA-0025
M-FAS-1000
M-STU-1000
M-CPS-1000
M-PDC-0200
M-CTC-1000
M-SCR-1000
M-NUT-1000
M-CBL-0025
M-FRT-0025
M-HP1-0025
M-HP2-0025
RN-0025-115-1-60-A
M-ONB-0200
N/A
N/A
N/A
N/A
N/A
N/A
M-TMR-3000
N/A
N/A
N/A
M-WSP-0050
M-CFR-0025
M-CLE-0025
M-CRI-0025
Component Name
Refrigerant Gas compressor compressor electric box
Condenser
Fan motor
Fan Blade fan grill
Drier-Dehydrator
Heat Exchanger
Evaporator (water Heat
Exchanger)
Flexible steel tube (inlet)
Flexible steel tube (outlet)
Expansion valve
By-pass valve separator
Liquid Receiver
High Pressure Security switch
Fan on/off switch
Low pressure switch
Thermostatic switch
Water pressure Switch
Water pressure switch timer
Water pump contactor
Water pump
Water Tank
Water Gauge
Microprosessor
Fan Overload Protector
Compressor Overload Protector
Thermostatic Gauge
On/off Button
RN-0025-220-1-50-A
R134a
M-CMP-0035-220-1-50-A
N/A
M-CON-0035
M-FMT-0035-220-1-50
M-FAN-0075
M-GRL-0075
M-DRI-0200
M-EXC-0025
N/A
M-INL-0025
N/A
M-EXV-0075
N/A
N/A
N/A
M-HPS-0200
M-FNS-0200
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
M-COP-0035-220-1-50-A
M-THG-0325
M-ONB-0200
RN-0025-230-1-60-A
R134a
M-CMP-0035-230-1-60-A
N/A
M-CON-0035
M-FMT-0035-230-1-60
M-FAN-0075
M-GRL-0075
M-DRI-0200
M-EXC-0025
N/A
M-INL-0025
N/A
M-EXV-0075
N/A
N/A
N/A
M-HPS-0200
M-FNS-0200
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
M-COP-0035-230-1-60-A
M-THG-0325
M-ONB-0200
RN-0035-115-1-60-A
R134a
M-CMP-0035-115-1-60-A
N/A
M-CON-0035
M-FMT-0075-115-1-60
M-FAN-0075
M-GRL-0075
M-DRI-0200
M-EXC-0035
N/A
M-INL-0050
M-OTL-0050
M-EXV-0075
N/A
N/A
N/A
M-HPS-0200
M-FNS-0200
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
M-COP-0035-115-1-60-A
M-THG-0325
M-ONB-0200
RN-0035-220-1-50-A
R134a
M-CMP-0035-220-1-50-A
N/A
M-CON-0035
M-FMT-0035-220-1-50
M-FAN-0075
M-GRL-0075
M-DRI-0200
M-EXC-0035
N/A
M-INL-0050
M-OTL-0050
M-EXV-0075
N/A
N/A
N/A
M-HPS-0200
M-FNS-0200
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
M-COP-0035-220-1-50-A
M-THG-0325
M-ONB-0200
RN-0035-230-1-60-A
R134a
M-CMP-0035-230-1-60-A
N/A
M-CON-0035
M-FMT-0035-230-1-60
M-FAN-0075
M-GRL-0075
M-DRI-0200
M-EXC-0035
N/A
M-INL-0050
M-OTL-0050
M-EXV-0075
N/A
N/A
N/A
M-HPS-0200
M-FNS-0200
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
M-COP-0035-230-1-60-A
M-THG-0325
M-ONB-0200
Component Name
Main Switch
Contactor
Phase protection relay
Fan Contactor
Transformer
Secondary contact
Timer
Solenoid Valve
Membrane valve
Membrane
Water Separator
Cabinet Front
Cabinet Side - Left
Cabinet Side - Right
Cabinet Rear
Cabinet Top
Cabinet Base
Cabinette fastener
Cabinette Stud and Nut
Cabinet handle
Plastic Display cover
Cabinet Top Corners
Screws
Cage Nuts
Cabinet Legs
Cabinet Frame Top
Cabinette Horizontal profile 1
Cabinette Horizontal profile 2
M-CTO-0025
M-CBA-0025
M-FAS-1000
M-STU-1000
M-CPS-1000
M-PDC-0200
M-CTC-1000
M-SCR-1000
M-NUT-1000
M-CBL-0025
M-FRT-0025
M-HP1-0025
M-HP2-0025
RN-0025-220-1-50-A
N/A
N/A
N/A
N/A
N/A
N/A
M-TMR-3000
N/A
N/A
N/A
M-WSP-0050
M-CFR-0025
M-CLE-0025
M-CRI-0025
M-CRE-0025
M-CTO-0025
M-CBA-0025
M-FAS-1000
M-STU-1000
M-CPS-1000
M-PDC-0200
M-CTC-1000
M-SCR-1000
M-NUT-1000
M-CBL-0025
M-FRT-0025
M-HP1-0025
M-HP2-0025
RN-0025-230-1-60-A
N/A
N/A
N/A
N/A
N/A
N/A
M-TMR-3000
N/A
N/A
N/A
M-WSP-0050
M-CFR-0025
M-CLE-0025
M-CRI-0025
M-CRE-0025
M-CTO-0050
M-CBA-0050
M-FAS-1000
M-STU-1000
M-CPS-1000
M-PDC-0200
M-CTC-1000
M-SCR-1000
M-NUT-1000
M-CBL-0050
M-FRT-0050
M-HP1-0050
M-HP2-0050
RN-0035-115-1-60-A
N/A
N/A
N/A
N/A
N/A
N/A
M-TMR-3000
M-SLV-0150-115
N/A
N/A
N/A
M-CFR-0050
M-CLE-0050
M-CRI-0050
M-CRE-0050
M-CTO-0050
M-CBA-0050
M-FAS-1000
M-STU-1000
M-CPS-1000
M-PDC-0200
M-CTC-1000
M-SCR-1000
M-NUT-1000
M-CBL-0050
M-FRT-0050
M-HP1-0050
M-HP2-0050
RN-0035-220-1-50-A
N/A
N/A
N/A
N/A
N/A
N/A
M-TMR-3000
M-SLV-0200-230
N/A
N/A
N/A
M-CFR-0050
M-CLE-0050
M-CRI-0050
M-CRE-0050
M-CTO-0050
M-CBA-0050
M-FAS-1000
M-STU-1000
M-CPS-1000
M-PDC-0200
M-CTC-1000
M-SCR-1000
M-NUT-1000
M-CBL-0050
M-FRT-0050
M-HP1-0050
M-HP2-0050
RN-0035-230-1-60-A
N/A
N/A
N/A
N/A
N/A
N/A
M-TMR-3000
M-SLV-0200-230
N/A
N/A
N/A
M-CFR-0050
M-CLE-0050
M-CRI-0050
M-CRE-0050
Component Name
Refrigerant Gas compressor compressor electric box
Condenser
Fan motor
Fan Blade fan grill
Drier-Dehydrator
Heat Exchanger
Evaporator (water Heat
Exchanger)
Flexible steel tube (inlet)
Flexible steel tube (outlet)
Expansion valve
By-pass valve separator
Liquid Receiver
High Pressure Security switch
Fan on/off switch
Low pressure switch
Thermostatic switch
Water pressure Switch
Water pressure switch timer
Water pump contactor
Water pump
Water Tank
Water Gauge
Microprosessor
Fan Overload Protector
Compressor Overload Protector
Thermostatic Gauge
On/off Button
RN-0050-115-1-60-A
R134a
M-CMP-0050-115-1-60-A
N/A
M-CON-0050
M-FMT-0075-115-1-60
M-FAN-0075
M-GRL-0075
M-DRI-0200
M-EXC-0050
N/A
M-INL-0050
M-OTL-0050
M-EXV-0075
N/A
N/A
N/A
M-HPS-0200
M-FNS-0200
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
M-COP-0050-115-1-60-A
M-THG-0325
M-ONB-0200
RN-0050-220-1-50-A
R134a
M-CMP-0050-220-1-50-A
N/A
M-CON-0050
M-FMT-0075-220-1-50
M-FAN-0075
M-GRL-0075
M-DRI-0200
M-EXC-0050
N/A
M-INL-0050
M-OTL-0050
M-EXV-0075
N/A
N/A
N/A
M-HPS-0200
M-FNS-0200
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
M-COP-0050-220-1-50-A
M-THG-0325
M-ONB-0200
RN-0050-230-1-60-A
R134a
M-CMP-0050-230-1-60-A
N/A
M-CON-0050
M-FMT-0150-230-1-60
M-FAN-0075
M-GRL-0075
M-DRI-0200
M-EXC-0050
N/A
M-INL-0050
M-OTL-0050
M-EXV-0075
N/A
N/A
N/A
M-HPS-0200
M-FNS-0200
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
M-COP-0050-230-1-60-A
M-THG-0325
M-ONB-0200
RN-0075-115-1-60-A
R134a
M-CMP-0075-115-1-60-A
N/A
M-CON-0075
M-FMT-0075-115-1-60
M-FAN-0075
M-GRL-0075
M-DRI-0200
M-EXC-0075
N/A
M-INL-0100
M-OTL-0100
M-EXV-0075
N/A
N/A
N/A
M-HPS-0200
M-FNS-0200
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
M-COP-0075-115-1-60-A
M-THG-0325
M-ONB-0200
RN-0075-220-1-50-A
R134a
M-CMP-0075-220-1-50-A
N/A
M-CON-0075
M-FMT-0075-220-1-50
M-FAN-0075
M-GRL-0075
M-DRI-0200
M-EXC-0075
N/A
M-INL-0100
M-OTL-0100
M-EXV-0075
N/A
N/A
N/A
M-HPS-0200
M-FNS-0200
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
M-COP-0075-220-1-50-A
M-THG-0325
M-ONB-0200
Component Name
Main Switch
Contactor
Phase protection relay
Fan Contactor
Transformer
Secondary contact
Timer
Solenoid Valve
Membrane valve
Membrane
Water Separator
Cabinet Front
Cabinet Side - Left
Cabinet Side - Right
Cabinet Rear
Cabinet Top
Cabinet Base
Cabinette fastener
Cabinette Stud and Nut
Cabinet handle
Plastic Display cover
Cabinet Top Corners
Screws
Cage Nuts
Cabinet Legs
Cabinet Frame Top
Cabinette Horizontal profile 1
Cabinette Horizontal profile 2
M-CTO-0050
M-CBA-0050
M-FAS-1000
M-STU-1000
M-CPS-1000
M-PDC-0200
M-CTC-1000
M-SCR-1000
M-NUT-1000
M-CBL-0050
M-FRT-0050
M-HP1-0050
M-HP2-0050
RN-0050-115-1-60-A
N/A
N/A
N/A
N/A
N/A
N/A
M-TMR-3000
M-SLV-0150-115
N/A
N/A
N/A
M-CFR-0050
M-CLE-0050
M-CRI-0050
M-CRE-0050
M-CTO-0050
M-CBA-0050
M-FAS-1000
M-STU-1000
M-CPS-1000
M-PDC-0200
M-CTC-1000
M-SCR-1000
M-NUT-1000
M-CBL-0050
M-FRT-0050
M-HP1-0050
M-HP2-0050
RN-0050-220-1-50-A
N/A
N/A
N/A
N/A
N/A
N/A
M-TMR-3000
M-SLV-0200-230
N/A
N/A
N/A
M-CFR-0050
M-CLE-0050
M-CRI-0050
M-CRE-0050
M-CTO-0050
M-CBA-0050
M-FAS-1000
M-STU-1000
M-CPS-1000
M-PDC-0200
M-CTC-1000
M-SCR-1000
M-NUT-1000
M-CBL-0050
M-FRT-0050
M-HP1-0050
M-HP2-0050
RN-0050-230-1-60-A
N/A
N/A
N/A
N/A
N/A
N/A
M-TMR-3000
M-SLV-0200-230
N/A
N/A
N/A
M-CFR-0050
M-CLE-0050
M-CRI-0050
M-CRE-0050
M-CTO-0075
M-CBA-0075
M-FAS-1000
M-STU-1000
M-CPS-1000
M-PDC-0200
M-CTC-1000
M-SCR-1000
M-NUT-1000
M-CBL-0075
M-FRT-0075
M-HP1-0075
M-HP2-0075
RN-0075-115-1-60-A
N/A
N/A
N/A
N/A
N/A
N/A
M-TMR-3000
M-SLV-0150-115
N/A
N/A
N/A
M-CFR-0075
M-CLE-0075
M-CRI-0075
M-CRE-0075
M-CTO-0075
M-CBA-0075
M-FAS-1000
M-STU-1000
M-CPS-1000
M-PDC-0200
M-CTC-1000
M-SCR-1000
M-NUT-1000
M-CBL-0075
M-FRT-0075
M-HP1-0075
M-HP2-0075
RN-0075-220-1-50-A
N/A
N/A
N/A
N/A
N/A
N/A
M-TMR-3000
M-SLV-0200-230
N/A
N/A
N/A
M-CFR-0075
M-CLE-0075
M-CRI-0075
M-CRE-0075
Component Name
Refrigerant Gas compressor compressor electric box
Condenser
Fan motor
Fan Blade fan grill
Drier-Dehydrator
Heat Exchanger
Evaporator (water Heat
Exchanger)
Flexible steel tube (inlet)
Flexible steel tube (outlet)
Expansion valve
By-pass valve separator
Liquid Receiver
High Pressure Security switch
Fan on/off switch
Low pressure switch
Thermostatic switch
Water pressure Switch
Water pressure switch timer
Water pump contactor
Water pump
Water Tank
Water Gauge
Microprosessor
Fan Overload Protector
Compressor Overload Protector
Thermostatic Gauge
On/off Button
RN-0075-230-1-60-A
R134a
M-CMP-0075-230-1-60-A
N/A
M-CON-0075
M-FMT-0150-230-1-60
M-FAN-0075
M-GRL-0075
M-DRI-0200
M-EXC-0075
N/A
M-INL-0100
M-OTL-0100
M-EXV-0075
N/A
N/A
N/A
M-HPS-0200
M-FNS-0200
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
M-COP-0075-230-1-60-A
M-THG-0325
M-ONB-0200
RN-0100-115-1-60-A
R134a
M-CMP-0100-115-1-60-A
M-CEB-0100-115-1-60
M-CON-0100
M-FMT-0150-115-1-60
M-FAN-0150
M-GRL-0150
M-DRI-0200
M-EXC-0125
N/A
M-INL-0100
M-OTL-0100
M-EXV-0200
M-BYV-0100
N/A
N/A
M-HPS-0200
M-FNS-0200
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
M-COP-0100-115-1-60-A
M-THG-0325
M-ONB-0200
RN-0100-230-1-60-A
R134a
M-CMP-0100-230-1-60-A
M-CEB-0100-230-1-60
M-CON-0100
M-FMT-0200-230-1-60
M-FAN-0150
M-GRL-0150
M-DRI-0200
M-EXC-0125
N/A
M-INL-0100
M-OTL-0100
M-EXV-0200
M-BYV-0100
N/A
N/A
M-HPS-0200
M-FNS-0200
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
M-COP-0100-230-1-60-A
M-THG-0325
M-ONB-0200
RN-0125-115-1-60-A
R134a
M-CMP-0125-115-1-60-A
M-CEB-0125-115-1-60
M-CON-0150
M-FMT-0150-115-1-60
M-FAN-0150
M-GRL-0150
M-DRI-0200
M-EXC-0125
N/A
M-INL-0150
M-OTL-0150
M-EXV-0200
M-BYV-0200
N/A
N/A
M-HPS-0200
M-FNS-0200
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
M-COP-0125-115-1-60-A
M-THG-0325
M-ONB-0200
RN-0125-220-1-50-A
R134a
M-CMP-125-220-1-50-A
M-CEB-0125-230-1-50
M-CON-0150
M-FMT-0200-220-1-50
M-FAN-0150
M-GRL-0150
M-DRI-0200
M-EXC-0125
N/A
M-INL-0150
M-OTL-0150
M-EXV-0200
M-BYV-0200
N/A
N/A
M-HPS-0200
M-FNS-0200
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
M-COP-125-220-1-50-A
M-THG-0325
M-ONB-0200
Component Name
Main Switch
Contactor
Phase protection relay
Fan Contactor
Transformer
Secondary contact
Timer
Solenoid Valve
Membrane valve
Membrane
Water Separator
Cabinet Front
Cabinet Side - Left
Cabinet Side - Right
Cabinet Rear
Cabinet Top
Cabinet Base
Cabinette fastener
Cabinette Stud and Nut
Cabinet handle
Plastic Display cover
Cabinet Top Corners
Screws
Cage Nuts
Cabinet Legs
Cabinet Frame Top
Cabinette Horizontal profile 1
Cabinette Horizontal profile 2
M-CTO-0075
M-CBA-0075
M-FAS-1000
M-STU-1000
M-CPS-1000
M-PDC-0200
M-CTC-1000
M-SCR-1000
M-NUT-1000
M-CBL-0075
M-FRT-0075
M-HP1-0075
M-HP2-0075
RN-0075-230-1-60-A
N/A
N/A
N/A
N/A
N/A
N/A
M-TMR-3000
M-SLV-0200-230
N/A
N/A
N/A
M-CFR-0075
M-CLE-0075
M-CRI-0075
M-CRE-0075
M-CTO-0100
M-CBA-0100
M-FAS-1000
M-STU-1000
M-CPS-1000
M-PDC-0200
M-CTC-1000
M-SCR-1000
M-NUT-1000
M-CBL-0100
M-FRT-0100
M-HP1-0100
M-HP2-0100
RN-0100-115-1-60-A
N/A
N/A
N/A
N/A
N/A
N/A
M-TMR-3000
M-SLV-0150-115
N/A
N/A
N/A
M-CFR-0100
M-CLE-0100
M-CRI-0100
M-CRE-0100
M-CTO-0100
M-CBA-0100
M-FAS-1000
M-STU-1000
M-CPS-1000
M-PDC-0200
M-CTC-1000
M-SCR-1000
M-NUT-1000
M-CBL-0100
M-FRT-0100
M-HP1-0100
M-HP2-0100
RN-0100-230-1-60-A
N/A
N/A
N/A
N/A
N/A
N/A
M-TMR-3000
M-SLV-0200-230
N/A
N/A
N/A
M-CFR-0100
M-CLE-0100
M-CRI-0100
M-CRE-0100
M-CTO-0150
M-CBA-0150
M-FAS-1000
M-STU-1000
M-CPS-1000
M-PDC-0200
M-CTC-1000
M-SCR-1000
M-NUT-1000
M-CBL-0150
M-FRT-0150
M-HP1-0150
M-HP2-0150
RN-0125-115-1-60-A
N/A
N/A
N/A
N/A
N/A
N/A
M-TMR-3000
M-SLV-0150-115
N/A
N/A
N/A
M-CFR-0150
M-CLE-0150
M-CRI-0150
M-CRE-0150
M-CTO-0150
M-CBA-0150
M-FAS-1000
M-STU-1000
M-CPS-1000
M-PDC-0200
M-CTC-1000
M-SCR-1000
M-NUT-1000
M-CBL-0150
M-FRT-0150
M-HP1-0150
M-HP2-0150
RN-0125-220-1-50-A
N/A
N/A
N/A
N/A
N/A
N/A
M-TMR-3000
M-SLV-0200-230
N/A
N/A
N/A
M-CFR-0150
M-CLE-0150
M-CRI-0150
M-CRE-0150
Component Name
Refrigerant Gas compressor compressor electric box
Condenser
Fan motor
Fan Blade fan grill
Drier-Dehydrator
Heat Exchanger
Evaporator (water Heat
Exchanger)
Flexible steel tube (inlet)
Flexible steel tube (outlet)
Expansion valve
By-pass valve separator
Liquid Receiver
High Pressure Security switch
Fan on/off switch
Low pressure switch
Thermostatic switch
Water pressure Switch
Water pressure switch timer
Water pump contactor
Water pump
Water Tank
Water Gauge
Microprosessor
Fan Overload Protector
Compressor Overload Protector
Thermostatic Gauge
On/off Button
RN-0125-230-1-60-A
R134a
M-CMP-0150-230-1-60-A
M-CEB-0150-230-1-60
M-CON-0150
M-FMT-0200-230-1-60
M-FAN-0150
M-GRL-0150
M-DRI-0200
M-EXC-0125
N/A
M-INL-0150
M-OTL-0150
M-EXV-0200
M-BYV-0200
N/A
N/A
M-HPS-0200
M-FNS-0200
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
M-COP-0150-230-1-60-A
M-THG-0325
M-ONB-0200
RN-0150-115-1-60-A
R134a
M-CMP-0150-115-1-60-A
M-CEB-0150-115-1-60
M-CON-0150
M-FMT-0150-115-1-60
M-FAN-0150
M-GRL-0150
M-DRI-0200
M-EXC-0200
N/A
M-INL-0150
M-OTL-0150
M-EXV-0200
M-BYV-0200
N/A
N/A
M-HPS-0200
M-FNS-0200
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
M-COP-0150-115-1-60-A
M-THG-0325
M-ONB-0200
RN-0150-230-1-60-A
R134a
M-CMP-0150-230-1-60-A
M-CEB-0150-230-1-60
M-CON-0150
M-FMT-0200-230-1-60
M-FAN-0150
M-GRL-0150
M-DRI-0200
M-EXC-0200
N/A
M-INL-0150
M-OTL-0150
M-EXV-0200
M-BYV-0200
N/A
N/A
M-HPS-0200
M-FNS-0200
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
M-COP-0150-230-1-60-A
M-THG-0325
M-ONB-0200
RN-0175-220-1-50-A
R134a
M-CMP-0200-220-1-50-A
M-CEB-0200-220-1-050
M-CON-0175
M-FMT-0200-220-1-50
M-FAN-0200
M-GRL-0200
M-DRI-0200
M-EXC-0200
N/A
M-INL-0200
M-OTL-0200
M-EXV-0200
M-BYV-0200
N/A
N/A
M-HPS-0200
M-FNS-0200
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
M-COP-0200-220-1-50-A
M-THG-0325
M-ONB-0200
RN-0175-230-1-60-A
R134a
M-CMP-0200-230-1-60-A
M-CEB-0200-230-1-60
M-CON-0175
M-FMT-0200-230-1-60
M-FAN-0200
M-GRL-0200
M-DRI-0200
M-EXC-0200
N/A
M-INL-0200
M-OTL-0200
M-EXV-0200
M-BYV-0200
N/A
N/A
M-HPS-0200
M-FNS-0200
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
M-COP-0200-230-1-60-A
M-THG-0325
M-ONB-0200
Component Name
Main Switch
Contactor
Phase protection relay
Fan Contactor
Transformer
Secondary contact
Timer
Solenoid Valve
Membrane valve
Membrane
Water Separator
Cabinet Front
Cabinet Side - Left
Cabinet Side - Right
Cabinet Rear
Cabinet Top
Cabinet Base
Cabinette fastener
Cabinette Stud and Nut
Cabinet handle
Plastic Display cover
Cabinet Top Corners
Screws
Cage Nuts
Cabinet Legs
Cabinet Frame Top
Cabinette Horizontal profile 1
Cabinette Horizontal profile 2
M-CTO-0150
M-CBA-0150
M-FAS-1000
M-STU-1000
M-CPS-1000
M-PDC-0200
M-CTC-1000
M-SCR-1000
M-NUT-1000
M-CBL-0150
M-FRT-0150
M-HP1-0150
M-HP2-0150
RN-0125-230-1-60-A
N/A
N/A
N/A
N/A
N/A
N/A
M-TMR-3000
M-SLV-0200-230
N/A
N/A
N/A
M-CFR-0150
M-CLE-0150
M-CRI-0150
M-CRE-0150
M-CTO-0150
M-CBA-0150
M-FAS-1000
M-STU-1000
M-CPS-1000
M-PDC-0200
M-CTC-1000
M-SCR-1000
M-NUT-1000
M-CBL-0150
M-FRT-0150
M-HP1-0150
M-HP2-0150
RN-0150-115-1-60-A
M-MNS-0700
N/A
N/A
N/A
N/A
N/A
M-TMR-3000
M-SLV-0150-115
N/A
N/A
N/A
M-CFR-0150
M-CLE-0150
M-CRI-0150
M-CRE-0150
M-CTO-0150
M-CBA-0150
M-FAS-1000
M-STU-1000
M-CPS-1000
M-PDC-0200
M-CTC-1000
M-SCR-1000
M-NUT-1000
M-CBL-0150
M-FRT-0150
M-HP1-0150
M-HP2-0150
RN-0150-230-1-60-A
N/A
N/A
N/A
N/A
N/A
N/A
M-TMR-3000
M-SLV-0200-230
N/A
N/A
N/A
M-CFR-0150
M-CLE-0150
M-CRI-0150
M-CRE-0150
M-CTO-0200
M-CBA-0200
M-FAS-1000
M-STU-1000
M-CPS-1000
M-PDC-0200
M-CTC-1000
M-SCR-1000
M-NUT-1000
M-CBL-0150
M-FRT-0150
M-HP1-0200
M-HP2-0200
RN-0175-220-1-50-A
N/A
N/A
N/A
N/A
N/A
N/A
M-TMR-3000
M-SLV-0200-230
N/A
N/A
N/A
M-CFR-0200
M-CLE-0200
M-CRI-0200
M-CRE-0200
M-CTO-0200
M-CBA-0200
M-FAS-1000
M-STU-1000
M-CPS-1000
M-PDC-0200
M-CTC-1000
M-SCR-1000
M-NUT-1000
M-CBL-0150
M-FRT-0150
M-HP1-0200
M-HP2-0200
RN-0175-230-1-60-A
N/A
N/A
N/A
N/A
N/A
N/A
M-TMR-3000
M-SLV-0200-230
N/A
N/A
N/A
M-CFR-0200
M-CLE-0200
M-CRI-0200
M-CRE-0200
Component Name
Refrigerant Gas compressor compressor electric box
Condenser
Fan motor
Fan Blade fan grill
Drier-Dehydrator
Heat Exchanger
Evaporator (water Heat
Exchanger)
Flexible steel tube (inlet)
Flexible steel tube (outlet)
Expansion valve
By-pass valve separator
Liquid Receiver
High Pressure Security switch
Fan on/off switch
Low pressure switch
Thermostatic switch
Water pressure Switch
Water pressure switch timer
Water pump contactor
Water pump
Water Tank
Water Gauge
Microprosessor
Fan Overload Protector
Compressor Overload Protector
Thermostatic Gauge
On/off Button
RN-0200-220-1-50-A
R134a
M-CMP-0200-220-1-50-A
M-CEB-0200-220-1-050
M-CON-0200
M-FMT-0200-220-1-50
M-FAN-0200
M-GRL-0200
M-DRI-0200
M-EXC-0200
N/A
M-INL-0200
M-OTL-0200
M-EXV-0200
M-BYV-0200
N/A
N/A
M-HPS-0200
M-FNS-0200
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
M-COP-0200-220-1-50-A
M-THG-0325
M-ONB-0200
RN-0200-230-1-60-A
R134a
M-CMP-0200-230-1-60-A
M-CEB-0200-230-1-60
M-CON-0200
M-FMT-0200-230-1-60
M-FAN-0200
M-GRL-0200
M-DRI-0200
M-EXC-0200
N/A
M-INL-0200
M-OTL-0200
M-EXV-0200
M-BYV-0200
N/A
N/A
M-HPS-0200
M-FNS-0200
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
M-COP-0200-230-1-60-A
M-THG-0325
M-ONB-0200
RN-0250-220-1-50-A
R134a
M-CMP-250-220-1-50-A
N/A
M-CON-0325
M-FMT-0325-220-1-50
N/A
N/A
M-DRI-1000
2 x M-EXC-125
N/A
N/A
N/A
M-EXV-0850
M-BYV-1000
N/A
M-RCV-0850
M-HPS-1000
M-FNS-0400
M-LPS-1000
M-THS-0325
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
M-COP-250-220-1-50-A
M-THG-0325
N/A
RN-0250-230-1-60-A
R134a
M-CMP-250-230-1-60-A
N/A
M-CON-0325
M-FMT-0250-230-1-60
N/A
N/A
M-DRI-1000
2 x M-EXC-125
N/A
N/A
N/A
M-EXV-0850
M-BYV-1000
N/A
M-RCV-0850
M-HPS-1000
M-FNS-0400
M-LPS-1000
M-THS-0325
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
M-COP-250-230-1-60-A
M-THG-0325
N/A
RN-0250-230-3-60-A
R134a
M-CMP-250-230-3-60-A
N/A
M-CON-0325
M-FMT-0700-460-3-60
N/A
N/A
M-DRI-1000
2 x M-EXC-125
N/A
N/A
N/A
M-EXV-0850
M-BYV-1000
N/A
M-RCV-0850
M-HPS-1000
M-FNS-0400
M-LPS-1000
M-THS-0325
N/A
N/A
N/A
N/A
N/A
N/A
N/A
M-FOP-3000
M-COP-250-230-3-60-A
M-THG-0325
M-ONB-3000
Component Name
Main Switch
Contactor
Phase protection relay
Fan Contactor
Transformer
Secondary contact
Timer
Solenoid Valve
Membrane valve
Membrane
Water Separator
Cabinet Front
Cabinet Side - Left
Cabinet Side - Right
Cabinet Rear
Cabinet Top
Cabinet Base
Cabinette fastener
Cabinette Stud and Nut
Cabinet handle
Plastic Display cover
Cabinet Top Corners
Screws
Cage Nuts
Cabinet Legs
Cabinet Frame Top
Cabinette Horizontal profile 1
Cabinette Horizontal profile 2
M-CTO-0200
M-CBA-0200
M-FAS-1000
M-STU-1000
M-CPS-1000
M-PDC-0200
M-CTC-1000
M-SCR-1000
M-NUT-1000
M-CBL-0150
M-FRT-0150
M-HP1-0200
M-HP2-0200
RN-0200-220-1-50-A
N/A
N/A
N/A
N/A
N/A
N/A
M-TMR-3000
M-SLV-0200-230
N/A
N/A
N/A
M-CFR-0200
M-CLE-0200
M-CRI-0200
M-CRE-0200
M-CTO-0200
M-CBA-0200
M-FAS-1000
M-STU-1000
M-CPS-1000
M-PDC-0200
M-CTC-1000
M-SCR-1000
M-NUT-1000
M-CBL-0150
M-FRT-0150
M-HP1-0200
M-HP2-0200
RN-0200-230-1-60-A
N/A
N/A
N/A
N/A
N/A
N/A
M-TMR-3000
M-SLV-0200-230
N/A
N/A
N/A
M-CFR-0200
M-CLE-0200
M-CRI-0200
M-CRE-0200
M-CTO-0400
M-CBA-0400
M-FAS-1000
M-STU-1000
M-CPS-1000
N/A
M-CTC-1000
M-SCR-1000
M-NUT-1000
M-CBL-0150
M-FRT-0150
M-HP1-0400
M-HP2-0400
RN-0250-220-1-50-A
M-MNS-0700
N/A
N/A
N/A
N/A
M-SEC-1000
M-TMR-3000
M-SLV-0200-230
M-MMV-1000
M-MMM-1000
N/A
M-CFR-0400
M-CLE-0400
M-CRI-0400
M-CRE-0400
M-CTO-0400
M-CBA-0400
M-FAS-1000
M-STU-1000
M-CPS-1000
N/A
M-CTC-1000
M-SCR-1000
M-NUT-1000
M-CBL-0150
M-FRT-0150
M-HP1-0400
M-HP2-0400
RN-0250-230-1-60-A
M-MNS-0700
N/A
N/A
N/A
N/A
M-SEC-1000
M-TMR-3000
M-SLV-0200-230
M-MMV-1000
M-MMM-1000
N/A
M-CFR-0400
M-CLE-0400
M-CRI-0400
M-CRE-0400
M-CTO-0400
M-CBA-0400
M-FAS-1000
M-STU-1000
M-CPS-1000
N/A
M-CTC-1000
M-SCR-1000
M-NUT-1000
M-CBL-0150
M-FRT-0150
M-HP1-0400
M-HP2-0400
RN-0250-230-3-60-A
M-MNS-0700
M-CNT-0400
M-PPR-1000
M-FCN-1000
M-TRF-1000
M-SEC-1000
M-TMR-3000
M-SLV-3000-24
M-MMV-1000
M-MMM-1000
N/A
M-CFR-0400
M-CLE-0400
M-CRI-0400
M-CRE-0400
Component Name
Refrigerant Gas compressor compressor electric box
Condenser
Fan motor
Fan Blade fan grill
Drier-Dehydrator
Heat Exchanger
Evaporator (water Heat
Exchanger)
Flexible steel tube (inlet)
Flexible steel tube (outlet)
Expansion valve
By-pass valve separator
Liquid Receiver
High Pressure Security switch
Fan on/off switch
Low pressure switch
Thermostatic switch
Water pressure Switch
Water pressure switch timer
Water pump contactor
Water pump
Water Tank
Water Gauge
Microprosessor
Fan Overload Protector
Compressor Overload
Protector
Thermostatic Gauge
On/off Button
RN-0250-460-3-60-A
R134a
M-CMP-250-460-3-60-A
N/A
M-CON-0325
M-FMT-0700-460-3-60
N/A
N/A
M-DRI-1000
2 x M-EXC-125
N/A
N/A
N/A
M-EXV-0850
M-BYV-1000
N/A
M-RCV-0850
M-HPS-1000
M-FNS-0400
M-LPS-1000
M-THS-0325
N/A
N/A
N/A
N/A
N/A
N/A
N/A
M-FOP-3000
M-COP-250-460-3-60-A
M-THG-0325
M-ONB-3000
RN-0250-575-3-60-A
R134a
BELL İ DE Ğİ L
N/A
M-CON-0325
BELL İ DE Ğİ L
N/A
N/A
M-DRI-1000
2 x M-EXC-125
N/A
N/A
N/A
M-EXV-0850
M-BYV-1000
N/A
M-RCV-0850
M-HPS-1000
M-FNS-0400
M-LPS-1000
M-THS-0325
N/A
N/A
N/A
N/A
N/A
N/A
N/A
M-FOP-3000
BELL İ DE Ğİ L
M-THG-0325
M-ONB-3000
RN-0325-220-1-50-A
R134a
M-CMP-325-220-1-50-A
N/A
M-CON-0325
M-FMT-0325-220-1-50
N/A
N/A
M-DRI-1000
2 x M-EXC-200
N/A
N/A
N/A
M-EXV-1000
M-BYV-1000
N/A
M-RCV-0850
M-HPS-1000
M-FNS-0400
M-LPS-1000
M-THS-0325
N/A
N/A
N/A
N/A
N/A
N/A
N/A
M-COP-325-220-1-50-A
M-THG-0325
M-ONB-3000
RN-0325-230-3-60-A
R134a
M-CMP-325-230-3-60-A
N/A
M-CON-0325
M-FMT-0700-460-3-60
N/A
N/A
M-DRI-1000
2 x M-EXC-200
N/A
N/A
N/A
M-EXV-1000
M-BYV-1000
N/A
M-RCV-0850
M-HPS-1000
M-FNS-0400
M-LPS-1000
M-THS-0325
N/A
N/A
N/A
N/A
N/A
N/A
N/A
M-FOP-3000
M-COP-325-230-3-60-A
M-THG-0325
M-ONB-3000
RN-0325-460-3-60-A
R134a
M-CMP-325-460-3-60-A
N/A
M-CON-0325
M-FMT-0700-460-3-60
N/A
N/A
M-DRI-1000
2 x M-EXC-200
N/A
N/A
N/A
M-EXV-1000
M-BYV-1000
N/A
M-RCV-0850
M-HPS-1000
M-FNS-0400
M-LPS-1000
M-THS-0325
N/A
N/A
N/A
N/A
N/A
N/A
N/A
M-FOP-3000
M-COP-325-460-3-60-A
M-THG-0325
M-ONB-3000
RN-0325-575-3-60-A
R134a
M-CMP-325-575-3-60-A
N/A
M-CON-0325
M-FMT-0700-575-3-60
N/A
N/A
M-DRI-1000
2 x M-EXC-200
N/A
N/A
N/A
TN2 No:4
M-BYV-1000
N/A
M-RCV-0850
M-HPS-1000
M-FNS-0400
M-LPS-1000
M-THS-0325
N/A
N/A
N/A
N/A
N/A
N/A
N/A
M-FOP-3000
BELL İ DE Ğİ L
M-THG-0325
M-ONB-3000
Component Name
Main Switch
Contactor
Phase protection relay
Fan Contactor
Transformer
Secondary contact
Timer
Solenoid Valve
Membrane valve
Membrane
Water Separator
Cabinet Front
Cabinet Side - Left
Cabinet Side - Right
Cabinet Rear
Cabinet Top
Cabinet Base
Cabinette fastener
Cabinette Stud and Nut
Cabinet handle
Plastic Display cover
Cabinet Top Corners
Screws
Cage Nuts
Cabinet Legs
Cabinet Frame Top
Cabinette Horizontal profile 1
Cabinette Horizontal profile 2
M-CTO-0400
M-CBA-0400
M-FAS-1000
M-STU-1000
M-CPS-1000
N/A
M-CTC-1000
M-SCR-1000
M-NUT-1000
M-CBL-0150
M-FRT-0150
M-HP1-0400
M-HP2-0400
RN-0250-460-3-60-A
M-MNS-0700
M-CNT-0400
M-PPR-1000
M-FCN-1000
M-TRF-1000
M-SEC-1000
M-TMR-3000
M-SLV-3000-24
M-MMV-1000
M-MMM-1000
N/A
M-CFR-0400
M-CLE-0400
M-CRI-0400
M-CRE-0400
M-CTO-0400
M-CBA-0400
M-FAS-1000
M-STU-1000
M-CPS-1000
N/A
M-CTC-1000
M-SCR-1000
M-NUT-1000
M-CBL-0150
M-FRT-0150
M-HP1-0400
M-HP2-0400
RN-0250-575-3-60-A
M-MNS-0700
M-CNT-0400
M-PPR-1000
M-FCN-1000
M-TRF-1000
M-SEC-1000
M-TMR-3000
M-SLV-0200-230
M-MMV-1000
M-MMM-1000
N/A
M-CFR-0400
M-CLE-0400
M-CRI-0400
M-CRE-0400
M-CTO-0400
M-CBA-0400
M-FAS-1000
M-STU-1000
M-CPS-1000
N/A
M-CTC-1000
M-SCR-1000
M-NUT-1000
M-CBL-0150
M-FRT-0150
M-HP1-0400
M-HP2-0400
RN-0325-220-1-50-A
M-MNS-0700
N/A
N/A
M-FCN-1000
M-TRF-1000
M-SEC-1000
M-TMR-3000
M-SLV-0200-230
M-MMV-1000
M-MMM-1000
N/A
M-CFR-0400
M-CLE-0400
M-CRI-0400
M-CRE-0400
M-CTO-0400
M-CBA-0400
M-FAS-1000
M-STU-1000
M-CPS-1000
N/A
M-CTC-1000
M-SCR-1000
M-NUT-1000
M-CBL-0150
M-FRT-0150
M-HP1-0400
M-HP2-0400
RN-0325-230-3-60-A
M-MNS-0700
M-CNT-0400
M-PPR-1000
M-FCN-1000
M-TRF-1000
M-SEC-1000
M-TMR-3000
M-SLV-3000-24
M-MMV-1000
M-MMM-1000
N/A
M-CFR-0400
M-CLE-0400
M-CRI-0400
M-CRE-0400
M-CTO-0400
M-CBA-0400
M-FAS-1000
M-STU-1000
M-CPS-1000
N/A
M-CTC-1000
M-SCR-1000
M-NUT-1000
M-CBL-0150
M-FRT-0150
M-HP1-0400
M-HP2-0400
RN-0325-460-3-60-A
M-MNS-0700
M-CNT-0400
M-PPR-1000
M-FCN-1000
M-TRF-1000
M-SEC-1000
M-TMR-3000
M-SLV-3000-24
M-MMV-1000
M-MMM-1000
N/A
M-CFR-0400
M-CLE-0400
M-CRI-0400
M-CRE-0400
M-CRE-0400
M-CTO-0400
M-CBA-0400
M-FAS-1000
M-STU-1000
M-CPS-1000
N/A
M-CTC-1000
M-SCR-1000
M-NUT-1000
M-CBL-0150
M-FRT-0150
M-HP1-0400
M-HP2-0400
RN-0325-575-3-60-A
M-MNS-0700
M-CNT-0400
M-PPR-1000
M-FCN-1000
M-TRF-1000
M-SEC-1000
M-TMR-3000
M-SLV-0200-230
M-MMV-1000
M-MMM-1000
N/A
M-CFR-0400
M-CLE-0400
M-CRI-0400
NOTES
158
E-680 CONTROLLER FOR REFRIGERANT DRYERS
The RD product is effectively the RN product with a
E-680 Controller. Refer to Section 3.
E-680 is designed as a controller for refrigerant type compressed air dryers. The controller has 8 temperature sensor inputs. Each channel can be configured for type J, type K thermocouple or Pt-100 resistance thermometer. These inputs are used to measure the temperatures at various points in the dryer. The controller has also 8 digital (relay) outputs and 16 digital inputs. The digital outputs are taken through the normally open contacts of the output relays. The contact rating of the output relays are
10A at 250 V AC Digital inputs are activated by 24V
DC or AC.
The controller has an RS-485 communication interface that can be used for remotely monitoring channel temperatures, set points, input and output states. Modbus RTU protocol is used for communication.
The front panel of the controller contains a four line
20 character LCD display and 10 buttons that are used in configuration and manual control operations.
The dimensions of the controller are 96 x 192 mm
(front panel) with a depth of 110 mm. The panel cutout should be 90x185 mm. The operating voltage of the controller is 20 - 60V AC or 20 - 85V DC.
The front panel view of E-680 controller is given in
. The front panel of the controller contains a four line 20 character LCD display, 9 buttons and one alarm indicator LED.
Figure 4-1: The Front Panel View of E-680 Controller
The buttons below the LCD display ( , , , and ) are used in configuration operations.
button is used for manual control of the drain output. While in normal operation, the drain output is controlled according to the configured “drain on” and
159
E-680 CONTROLLER FOR REFRIGERANT DRYERS SECTION 4
“drain off” periods. When button is pressed the drain output is activated even if the dryer is in off state.
The dryer is automatically stopped if an anomaly is detected. In that case, the alarm output and the alarm indicator LED on the front panel become activated. In order to restart the dryer, alarm should be acknowledged and “restart delay” period should be timed out. Pressing button acknowledges the alarm and deenergizes the alarm output and alarm
LED.
and buttons are used for starting and stopping the dryer respectively. If the dryer is stopped manually, it can not be started before “restart delay” period is timed out.
4.2.1
1. E XTERNAL C ONNECTIONS
The back panel view and the connection terminals of
E-680 controller are given in
.
-01+ -02+ -03+ -04+ -05+ -06+ -07+ -08+
Figure 4-2: The Backpanel View of E-680 Controller
T ERMINALS IN THE U PPER R OW
These terminals are used for temperature sensors
(Pt-100).
controller.
T ERMINALS IN THE M IDDLE R OW
These terminals are used for digital outputs and digital inputs. The names and the functions in the order of the terminal numbers are given in the following table.
01 Inlet Air Temperature.
02 Exchanger Temperature.
03 Low Pressure Line Temperature.
04 High Pressure Line Temperature.
05 Ambient Temperature.
06 Auxiliary Channel Temperature. This temperature can be monitored, but sensor break has no effect on the operation of the controller.
07 Spare Channel 1.
08 Spare Channel 2.
T.No Name
3
4
1
2
5
6
COMM. For D. Out 1-4
COMM. For D. Out 1-4
D. OUTPUT 1
D. OUTPUT 2
D. OUTPUT 3
D. OUTPUT 4
Function
Compressor Motor
Drain Output (Normal)
Dryer is Running.
Dryer is Stoppd. In case of fault, the output flashes.
Spare channels are measured by the controller, but can not be monitored and sensor break for these channels has no effect on the operation of the
7
8
-
COMM. For D. Out 5-8
160
SECTION 4 E-680 CONTROLLER FOR REFRIGERANT DRYERS
T.No Name
9 COMM. For D. Out 5-8
10 D. OUTPUT 5
11 D. OUTPUT 6
12 D. OUTPUT 7
13 D. OUTPUT 8
14 -
15 COMM. For D. INPUTS
16 COMM. For D. INPUTS
17 COMM. For D. INPUTS
18 D. INPUT 1
Function
Drain Output (Inverted)
Spare
Spare
Alarm Output (Horn)
19 D. INPUT 2
20 D. INPUT 3
21 D. INPUT 4
22 D. INPUT 5
23 D. INPUT 6
24 D. INPUT 7
25 D. INPUT 8
26 D. INPUT 9
27 D. INPUT 10
28 D. INPUT 11
29 D. INPUT 12
30 D. INPUT 13
31 D. INPUT 14
32 D. INPUT 15
33 D. INPUT 16
Remote Start (Press and
Release)
Remote Stop (Press and
Release)
Compressor Fault
Compressor Overload
Fan Fault
Fan Overload
Phase Sequence Error
Remote Disable
Fan Motor is On
Configuration Enable
Spare
Spare
Spare
Spare
Spare
Spare
The contact rating of each output relay is 10A at 250
V AC.
Digital inputs are activated by 24V DC or AC.
T ERMINALS IN THE L OWER R OW
The first 3 terminals are for operating voltage.
(Phase, Neutral and Ground) The ground terminal should be connected to the chassis of the dryer.
The last 3 terminals are for RS-485 communication line.
4.2.2
N ORMAL O PERATION
When the controller is powered on it displays the type and version message and then normal operation screen is displayed as shown below.
SULLAIR
DEW POINT . 16°C
READY
The exchanger temperature and operation state of the dryer is displayed in this screen. Sequentially pressing button display other info related to the dryer in 8 different screens. While one screen is displayed, pressing button reverts to the normal operation screen. The views of the screens in sequence of the appearance are shown below.
161
E-680 CONTROLLER FOR REFRIGERANT DRYERS
........
INLET AIR TEMP.
20°C
EXCHANGER.TEMP.
18°C HIGH
SECTION 4
TOTAL TIME : 22.2
ECO TIME : 8.1
RUN TIME : 22.2
FILTER TIME: 22.2
LOW PRES.LINE TEMP.
18°C
HIGH PRES.LINE TEMP.
18°C
1. REMOTE DISABLE
2. INLET AIR TEMP.HI
3. EXCH TEMP.LO
4. COMPRESSOR FAULT
AMBIENT TEMPERATURE
19°C
AUXILIARY TEMP.
18°C
DATE : 22.03.10
TIME : 12.30.45
DAY : MONDAY
COMPRESSOR OK
FAN MOTOR OK
PHASE SEQUENCE OK
REMOTE CONTROL OK
D.INPUT1: LLLLLLLL
D.INPUT2: LLLLLLLL
D.OUTPUT: LLLHHLLL
162
SECTION 4 E-680 CONTROLLER FOR REFRIGERANT DRYERS
In the first 3 screens the sensor temperatures are displayed. If the measured temperatures are between their low and high limits, only the temperature value is displayed, otherwise ‘LOW’ or
‘HIGH’ message is added in the end of the line. In case of sensor break, only ‘SENSOR BREAK’ message is displayed.
The fourth screen displays the states of the compressor motor, fan motor, the phase sequence and remote disable. This information is compiled from the digital inputs. (Digital Inputs 3 to 8)
In the first two line of the fifth screen the total and
ECO operation durations of the dryer are displayed.
These values can not be reset. The third line displays the run time since the last maintenance. The fourth line indicates the filter usage time. If these times exceed their set values (see section 2.3.3.), i.e.
general maintenance period and filter change period, a flashing warning with a message ‘MAINTENANCE’ or ‘REPLACE FILTER’ is displayed in the fourth line of the display.
The sixth screen displays the last four events that caused the dryer to be stopped automatically.
The seventh screen displays the date and time.
The eighth screen displays the states of the digital inputs and digital outputs. The letters ‘L’ and ‘H’ stands for ‘not activated’ and ‘activated’ states respectively.
In order to start the dryer, all the temperatures except the exchanger temperature must be between their low and high limits. The low pressure line temperature can be ‘HIGH’. Digital inputs 3 to 8 should not be activated. If this is not the case, instead of ‘READY’ message, ‘DISABLED’ message is displayed in the normal operation screen.
When the dryer is started, the normal operation screen is displayed as shown below..
SULLAIR
DEW POINT . 16°C
READY
If the drain output is activated, ‘DRAIN ON’ message is displayed at the end of the last line. While the fan motor is running, ‘FAN MOTOR IS ON’ message is displayed in the second line. In ECO mode the appearance of the display is given below..
SULLAIR
ECO(SEC.) : 234
DEW POINT 8°C
RUNNING
The value at the end of the second row indicates the time in seconds since beginning of the ECO mode.
If the dryer is stopped automatically because of an anomaly, or manually by using button, the normal operating screen is displayed as shown below.
SULLAIR
DEW POINT 16°C
DISABLED 127
The number at the end of the last line indicates the remaining time in seconds from the restart delay. If this number becomes zero and there is no anomaly, the dryer can be restarted.
button is used to change the temperature unit from ºC to ºF or vice versa. When this button is pressed, the control operation stops about 3 seconds and all the temperature values are converted to the selected unit.
The first line in the normal operation display
(MIKROPOR) is user configurable.
163
E-680 CONTROLLER FOR REFRIGERANT DRYERS SECTION 4
4.2.3
C ONFIGURATION M ODE
In order to enter into configuration mode, button must be pressed at least 3 second duration. After this operation security code is asked. Security code is adjusted by and buttons. After adjusting the security code and pressing button, accesses the
“General Parameters Page”. Here, and buttons can be used to select the other pages. When a page is selected, pressing button accesses the first parameter in that page. Successively pressing button will display the other parameters in that page.
After the last parameter or pressing button more than two seconds, reverts to the top of that page where a different page can be selected. When a parameter is selected, its value can be edited by and buttons. In anywhere in the configuration pages, pressing button quits the configuration mode and reverts to the normal operation.
If the entered security code is not correct, all the parameters except “Security Code” parameter in the
“General Parameters Page” can be accessed but no modification is allowed.
The value of the security code is determined by the parameter “Security Code” in the “General
Parameters Page”. The factory setting of the security code is “10”.
The Configuration Pages and the parameters in the configuration pages are given below.
G ENERAL P ARAMETERS P AGE
1. Language
2. Communication Address
3. Baud Rate
4. Parity
5. Message Text
6. Security Code
T EMPERATURE S ET POINTS P AGE
(F ACTORY S ETTINGS )
1. Inlet Air Temp. / Low Alarm Setpoint
(32°F/0°C)
2. Inlet Air Temp. / High Alarm Setpoint
(131°F/55°C)
3. Exchanger Temp. / Low Alarm Setpoint
(27°F)/-3°C)
4. Exchanger Temp. / High Alarm Setpoint
(68°F/20°C)
5. Low Pressure Line Temp. / Low Alarm Setpoint
(23°F/-5°C)
6. Low Pressure Line Temp. / High Alarm Setpoint
(113°F/45°C)
7. High Pressure Line Temp. / Low Alarm Setpoint
(32°F/0°C)
8. High Pressure Line Temp. / High Alarm Setpoint
(194°F/90°C)
9. Ambient Temperature / Low Alarm Setpoint
(32°F/0°C)
10. Ambient Temperature / High Alarm Setpoint
(131°F/55°C)
11. Exchanger Temp. / ECO Start Setpoint
(38°F/3°C)
12. Exchanger Temp. / ECO End Setpoint
(50°F/10°C)
13. Condensor Temp. Diff. Set Point
(41°F/5°C)
T IME P ARAMETERS P AGE
1. Exchanger Temp. / Alarm Delay (Minute)
2. ECO Start Delay (Minute)
3. Low Pressure Line Temp. / High Alarm Delay
(Minute)
4. Restart Delay (Second)
5. Drain Off Time (Minute)
6. Drain On Time (Second)
7. Filter Change Period (Hour)
8. General Maintenance Period (Hour)
D ATE -T IME A DJUST P AGE
1. Minutes
2. Hours
3. Date
4. Month
5. Year
6. Confirm (Y/N)
A NALOG I NPUT P ARAMETERS P AGE
1. 1. Channel Offset
2. 2. Channel Offset
164
SECTION 4
3. 3. Channel Offset
4. 4. Channel Offset
5. 5. Channel Offset
6. 6. Channel Offset
7. 7. Channel Offset
8. 8. Channel Offset
9. 1. Channel Input Type
10. 2. Channel Input Type
11. 3. Channel Input Type
12. 4. Channel Input Type
13. 5. Channel Input Type
14. 6. Channel Input Type
15. 7. Channel Input Type
16. 8. Channel Input Type
2.3.6. C ALIBRATION P AGE
1. 50mV Cal (Channel 1)
2. 0°C Cal. (Channel 1)
E-680 CONTROLLER FOR REFRIGERANT DRYERS
3. Ambient Temp. Cal. (Channel 1)
4. 1. RT Cal. (390 ohm)
5. 2. RT Cal. (390 ohm)
6. 3. RT Cal. (390 ohm)
7. 4. RT Cal. (390 ohm)
8. 5. RT Cal. (390 ohm)
9. 6. RT Cal. (390 ohm)
10. 7. RT Cal. (390 ohm)
11. 8. RT Cal. (390 ohm)
The 7th and 8th Parameters in the “Time Parameters
Page” (Filter Change Period and Maintenance
Period) and all the parameters in “Calibration Page” can not be edited unless the Digital Input 10 is activated (Configuration Enable).
While ‘Filter Change Period’ parameter is selected, pressing the buttons and simultaneously, resets the
FILTER TIME to 0.0.
While ‘Maintenance Period’ parameter is selected, pressing the buttons and simultaneously, resets the
RUN TIME to 0.0.
165
4.3
ED—RD400
02250195-264 R00
4.3
ED—RD400
KEY
29
30
31
32
25
26
27
28
21
22
23
24
17
18
19
20
13
14
15
16
9
10
11
12
7
8
5
6
3
4
1
2
PART NUMBER DESCRIPTION
M-CMP-0400-460-3-60-A COMPRESSOR
M-CON-0400 CONDENSOR
M-FMF-0700-460-3-60
M-DRI-1000
FAN MOTOR ASSEMBLY
DRIER-DEHYDRATOR
M-EXC-0200
M-EXV-1000
M-BYY-1000
M-RCV-0850
HEAT EXCHANGER
EXPANSION VALVE
BY PASS VALVE
LIQUID RECEIVER
M-HPS-1000
M-FNS-0400
M-LPS-1000
M-MKP-1000
M-MNS-0700
M-SLV-3000-24
M-MMV-3000
M-MMM-3000
HIGH PRESSURE SECURITY SWITCH
FAN ON/OFF SWITCH
LOW PRESSURE SWITCH
MIKROPROCESSOR
MAIN SWITCH
SOLENOID VALVE
MEMBRANE VALVE
MEMBRANE
M-CFR-0400
M-CSI-0400
M-CRE-0400
M-CTO-0400
M-CBA-0400
M-CBL-0400
M-HP1-0400
M-HP2-0400
M-CTC-3000
M-CPS-3000
M-STU-3000
M-FAS-3000
M-NUT-3000
M-SCR-3000
M-TRF-1000
M-PPR-1000
CABINET FRONT
CABINET SIDE
CABINET REAR
CABINET TOP
CABINET BASE
CABINET LEG
CABINETHORIZONTAL PROFILE 1
CABINET HORIZONTAL PROFILE 2
CABINET TOP CORNER
CABINET HANDLE
CABINET STUD AND NUT
CABINET FASTENER
CAGE NUT AND SCREW
SCREW TYPE 2
TRANSFORMER
PHASE PROTECTION RELAY
QTY
1
1
16
16
12
12
4
8
2
2
1
4
1
1
1
2
1
1
1
1
1
1
1
1
1
1
2
1
1
1
1
1
KEY
33
34
35
36
PART NUMBER
M-CNT-0400
M-FCN-1000
M-COP-0400-460-3-60-A
M-FOP-3000
DESCRIPTION
CONTACTOR
FAN CONTACTOR
COMPRESSOR OVERLOAD
PROTECTOR
FAN OVERLOAD PROTECTOR
QTY
1
1
1
1
4.4
ED—RD500
02250195-266 R00
4.4
ED—RD500
KEY
29
30
31
32
25
26
27
28
21
22
23
24
17
18
19
20
13
14
15
16
9
10
11
12
7
8
5
6
3
4
1
2
PART NUMBER
M-CMP-0500-460-3-60-A
M-CON-0500
M-FMT-0700-460-3-60
M-DRI-1000
M-EXC-0200
M-EXV-1000
M-BYY-1000
M-SPR-1000
M-RCV-0850
M-HPS-1000
M-FNS-0400
M-LPS-1000
M-MKP-1000
M-MNS-0700
M-SLV-3000-24
M-MMV-3000
M-MMM-3000
M-CFR-0850
M-CSI-0850
M-CRE-0850
M-CTO-0700
M-CBA-0850
M-CBL-0850
M-HP1-0850
M-HP2-0850
M-CTC-3000
M-CPS-3000
M-STU-3000
M-FAS-3000
M-NUT-3000
M-SCR-3000
M-TRF-1000
DESCRIPTION
COMPRESSOR
CONDENSOR
FAN MOTOR ASSEMBLY
DRIER-DEHYDRATOR
HEAT EXCHANGER
EXPANSION VALVE
BY PASS VALVE
SEPARATOR
LIQUID RECEIVER
HIGH PRESSURE SECURITY SWITCH
FAN ON/OFF SWITCH
LOW PRESSURE SWITCH
MIKROPROCESSOR
MAIN SWITCH
SOLENOID VALVE
MEMBRANE VALVE
MEMBRANE
CABINET FRONT
CABINET SIDE
CABINET REAR
CABINET TOP
CABINET BASE
CABINET LEG
CABINETHORIZONTAL PROFILE 1
CABINET HORIZONTAL PROFILE 2
CABINET TOP CORNER
CABINET HANDLE
CABINET STUD AND NUT
CABINET FASTENER
CAGE NUT AND SCREW
SCREW TYPE 2
TRANSFORMER
QTY
12
16
16
1
8
12
2
4
4
2
1
1
2
1
1
1
1
1
1
1
1
1
1
1
1
1
2
1
1
1
1
1
KEY
33
34
35
36
37
PART NUMBER
M-PPR-1000
M-CNT-0850
M-FCN-1000
M-COP-0500-460-3-60-A
M-FOP-3000
DESCRIPTION
PHASE PROTECTION RELAY
CONTACTOR
FAN CONTACTOR
COMPRESSOR OVERLOAD
PROTECTOR
FAN OVERLOAD PROTECTOR
QTY
1
1
1
1
1
4.5
ED—RD700
02250195-266 R00
4.5
ED—RD700
KEY
29
30
31
32
25
26
27
28
21
22
23
24
17
18
19
20
13
14
15
16
9
10
11
12
7
8
5
6
3
4
1
2
PART NUMBER DESCRIPTION
M-CMP-0700-460-3-60-A COMPRESSOR
M-CON-0700 CONDENSOR
M-FMT-0700-460-3-60
M-DRI-1000
FAN MOTOR ASSEMBLY
DRIER-DEHYDRATOR
M-EXC-0200
M-EXV-0700
M-BYY-1000
M-SPR-1000
HEAT EXCHANGER
EXPANSION VALVE
BY PASS VALVE
SEPARATOR
M-RCV-0850
M-HPS-1000
M-FNS-0400
M-LPS-1000
M-MKP-1000
M-MNS-0700
M-SLV-3000-24
M-MMV-3000
LIQUID RECEIVER
HIGH PRESSURE SECURITY SWITCH
FAN ON/OFF SWITCH
LOW PRESSURE SWITCH
MIKROPROCESSOR
MAIN SWITCH
SOLENOID VALVE
MEMBRANE VALVE
M-MMM-3000
M-CFR-0850
M-CSI-0850
M-CRE-0850
M-CTO-0700
M-CBA-0850
M-CBL-0850
M-HP1-0850
M-HP2-0850
M-CTC-3000
M-CPS-3000
M-STU-3000
M-FAS-3000
M-NUT-3000
M-SCR-3000
M-TRF-1000
MEMBRANE
CABINET FRONT
CABINET SIDE
CABINET REAR
CABINET TOP
CABINET BASE
CABINET LEG
CABINETHORIZONTAL PROFILE 1
CABINET HORIZONTAL PROFILE 2
CABINET TOP CORNER
CABINET HANDLE
CABINET STUD AND NUT
CABINET FASTENER
CAGE NUT AND SCREW
SCREW TYPE 2
TRANSFORMER
QTY
12
16
16
1
8
12
2
4
4
2
1
1
2
1
1
1
1
1
1
1
1
1
1
1
1
1
2
1
1
1
1
1
KEY
33
34
35
36
37
PART NUMBER
M-PPR-1000
M-CNT-0700
M-FCN-1000
M-COP-0700-460-3-60-A
M-FOP-3000
DESCRIPTION
PHASE PROTECTION RELAY
CONTACTOR
FAN CONTACTOR
COMPRESSOR OVERLOAD
PROTECTOR
FAN OVERLOAD PROTECTOR
QTY
1
1
1
1
1
4.6
ED—RD700 AIR COOLED
02250196-590 R00
4.6
ED—RD700 AIR COOLED
KEY
13
14
15
16
9
10
11
12
17
18
7
8
5
6
3
4
1
2
PART NUMBER
SEE REF. TABLE
M-CON-0700
SEE REF. TABLE
M-DRI-1200
M-EXC-0200
M-EXV-0700
M-BYV-1200
M-SPR-2000
M-RCV-0850
M-HPS-6000
M-FNS-0400
M-LPS-6000
M-MKP-6000
M-MNS-0700
M-SLV-6000-24
M-MMV-6000
M-MMM-6000
M-CFR-0850
DESCRIPTION
COMPRESSOR
CONDENSER
FAN MOTOR ASSEMBLY
DRIER-DEHYDRATOR
HEAT EXCHANGER
EXPANSION VALVE
BYPASS VALVE
SEPARATOR
LIQUID RECEIVER
HIGH PRESSURE SECURITY SWITCH
FAN ON/OFF SWITCH
LOW PRESSURE SWITCH
MIKROPROCESSOR
MAIN SWITCH
SELENOID VALVE
MEMBRANE VALVE
MEMBRANE
CABINET FRONT
QTY
1
1
1
1
1
1
2
1
1
1
1
1
3
1
1
1
1
1
KEY
31
32
33
34
27
28
29
30
35
36
37
23
24
25
26
19
20
21
22
PART NUMBER
M-CSI-0850
M-CRE-0850
M-CTO-0700
M-CBA-0850
M-CBL-0850
M-HP1-0850
M-HP2-0850
M-CTC-3000
M-CPS-3000
M-STU-3000
M-FAS-3000
M-NUT-3000
M-SCR-3000
M-TRF-6000
M-PPR-6000
SEE REF. TABLE
M-FCN-1000
SEE REF. TABLE
SEE REF. TABLE
DESCRIPTION
CABINET SIDE
CABINET REAR
CABINET TOP
CABINET BASE
CABINET LEG
CABINET HORIZONTAL PROFILE 1
CABINET HORIZONTAL PROFILE 2
CABINET TOP CORNER
CABINET HANDLE
CABINET STUD AND NUT
CABINET FASTENER
CAGE NUT AND SCREW
SCREW TYPE 2
TRANSFORMER
PHASE PROTECTION RELAY
CONTACTOR
FAN CONTACTOR
COMPRESSOR OVERLOAD PROTECTOR
FAN OVERLOAD PROTECTOR
QTY
1
1
16
1
8
12
12
16
2
1
2
2
4
4
2
1
1
2
1
DECAL CAPACITY
RD 700
RD 700
RD 700
RD 700
700 CFM
700 CFM
700 CFM
700 CFM
DRYER PART
NUMBER
POWER
RATINGS
02250193-827
02250193-908
02250193-967
02250194-125
230V/3Ph/
60Hz
430V/3Ph/
50Hz
460V/3Ph/
60Hz
575V/3Ph/
60Hz
COOLING
AIR COOLED
AIR COOLED
AIR COOLED
AIR COOLED
COMPRESSOR
M-CMP-700-230-3-60-A
M-CMP-700-460-3-60-A
M-CMP-700-460-3-60-A
M-CMP-700-575-3-60-A
FAN MOTOR
M-FMT-0700-460-3-60
M-FMT-0700-400-3-60
M-FMT-0700-460-3-60
M-FMT-0700-575-3-60
CONTACTOR
COMPRESSOR
OVERLOAD
PROTECTOR
FAN OVERLOAD
PROTECTOR
M-CNT-2400-460-3-60-A
M-CNT-1200-460-3-60-A
M-CNT-1200-460-3-60-A
M-CNT-1200-460-3-60-A
M-COP-850-230-3-60-A
M-COP-850-460-3-60-A
M-COP-850-460-3-60-A
M-COP-850-575-3-60-A
M-FOP-850-230-3-60-A
M-FOP-1200-460-3-60-A
M-FOP-1200-460-3-60-A
M-FOP-1200-460-3-60-A
4.7
ED—RD850
02250195-266 R00
4.7
ED—RD850
KEY
29
30
31
32
25
26
27
28
21
22
23
24
17
18
19
20
13
14
15
16
9
10
11
12
7
8
5
6
3
4
1
2
PART NUMBER DESCRIPTION
M-CMP-1000-460-3-60-A COMPRESSOR
M-CON-0850 CONDENSOR
M-FMT-1200-460-3-60
M-DRI-1000
FAN MOTOR ASSEMBLY
DRIER-DEHYDRATOR
M-EXC-0200
M-EXV-0850
M-BYY-1000
M-SPR-1000
HEAT EXCHANGER
EXPANSION VALVE
BY PASS VALVE
SEPARATOR
M-RCV-0850
M-HPS-1000
M-FNS-0400
M-LPS-1000
M-MKP-1000
M-MNS-2000
M-SLV-3000-24
M-MMV-1000
LIQUID RECEIVER
HIGH PRESSURE SECURITY SWITCH
FAN ON/OFF SWITCH
LOW PRESSURE SWITCH
MIKROPROCESSOR
MAIN SWITCH
SOLENOID VALVE
MEMBRANE VALVE
M-MMM-1000
M-CFR-0850
M-CSI-0850
M-CRE-0850
M-CTO-0850
M-CBA-0850
M-CBL-0850
M-HP1-0850
M-HP2-0850
M-CTC-3000
M-CPS-3000
M-STU-3000
M-FAS-3000
M-NUT-3000
M-SCR-3000
M-TRF-1000
MEMBRANE
CABINET FRONT
CABINET SIDE
CABINET REAR
CABINET TOP
CABINET BASE
CABINET LEG
CABINETHORIZONTAL PROFILE 1
CABINET HORIZONTAL PROFILE 2
CABINET TOP CORNER
CABINET HANDLE
CABINET STUD AND NUT
CABINET FASTENER
CAGE NUT AND SCREW
SCREW TYPE 2
TRANSFORMER
QTY
12
16
16
1
8
12
2
4
4
2
1
1
2
1
1
1
1
1
1
1
1
1
1
1
1
1
2
1
1
1
1
1
KEY
33
34
35
36
37
PART NUMBER
M-PPR-1000
M-CNT-0850
M-FCN-1000
M-COP-1000-460-3-60-A
M-FOP-3000
DESCRIPTION
PHASE PROTECTION RELAY
CONTACTOR
FAN CONTACTOR
COMPRESSOR OVERLOAD
PROTECTOR
FAN OVERLOAD PROTECTOR
QTY
1
1
1
1
1
4.8
ED—RD850 AIR COOLED
02250196-591 R00
4.8
ED—RD850 AIR COOLED
KEY
13
14
15
16
9
10
11
12
17
18
7
8
5
6
3
4
1
2
PART NUMBER
SEE REF. TABLE
M-CON-0850
SEE REF. TABLE
M-DRI-1200
M-EXC-0200
M-EXV-0850
M-BYV-1200
M-SPR-2000
M-RCV-0850
M-HPS-6000
M-FNS-0400
M-LPS-6000
M-MKP-6000
M-MNS-1600
M-SLV-6000-24
M-MMV-6000
M-MMM-6000
M-CFR-0850
DESCRIPTION
COMPRESSOR
CONDENSER
FAN MOTOR ASSEMBLY
DRIER-DEHYDRATOR
HEAT EXCHANGER
EXPANSION VALVE
BYPASS VALVE
SEPARATOR
LIQUID RECEIVER
HIGH PRESSURE SECURITY SWITCH
FAN ON/OFF SWITCH
LOW PRESSURE SWITCH
MIKROPROCESSOR
MAIN SWITCH
SELENOID VALVE
MEMBRANE VALVE
MEMBRANE
CABINET FRONT
QTY
1
1
1
1
1
1
2
1
1
1
1
1
4
2
2
1
1
1
KEY
31
32
33
34
35
27
28
29
30
23
24
25
26
19
20
21
22
36
37
PART NUMBER
M-CSI-0850
M-CRE-0850
M-CTO-0850
M-CBA-0850
M-CBL-0850
M-HP1-0850
M-HP2-0850
M-CTC-3000
M-CPS-3000
M-STU-3000
M-FAS-3000
M-NUT-3000
M-SCR-3000
M-TRF-6000
M-PPR-6000
M-CNT-0850
M-FCN-1000
SEE REF. TABLE
M-FOP-1200
DESCRIPTION
CABINET SIDE
CABINET REAR
CABINET TOP
CABINET BASE
CABINET LEG
CABINET HORIZONTAL PROFILE 1
CABINET HORIZONTAL PROFILE 2
CABINET TOP CORNER
CABINET HANDLE
CABINET STUD AND NUT
CABINET FASTENER
CAGE NUT AND SCREW
SCREW TYPE 2
TRANSFORMER
PHASE PROTECTION RELAY
CONTACTOR
FAN CONTACTOR
COMPRESSOR OVERLOAD
PROTECTOR
FAN OVERLOAD PROTECTOR
QTY
16
1
1
1
2
8
12
12
16
2
4
4
2
1
1
2
1
1
2
DECAL CAPACITY
DRYER PART
NUMBER
POWER
RATINGS
COOLING
RD 850
RD 850
RD 850
RD 850
850 CFM
850 CFM
850 CFM
850 CFM
02250193-828
02250193-909
02250193-968
02250194-126
230V/3Ph/
60Hz
430V/3Ph/
50Hz
430V/3Ph/
60Hz
575V/3Ph/
60Hz
AIR COOLED
AIR COOLED
AIR COOLED
AIR COOLED
COMPRESSOR
M-CMP-850-230-3-60-A
M-CMP-1000-460-3-50-A
M-CMP-1000-460-3-60-A
M-CMP-1000-575-3-60-A
FAN MOTOR
M-FMT-0850-230-3-60
M-FMT-1200-400-3-50
M-FMT-1200-460-3-60
M-FMT-1200-575-3-60
CONTACTOR
M-CNT-2400-460-360-A
M-CNT-1200-460-360-A
M-CNT-1200-460-360-A
M-CNT-1200-460-360-A
COMPRESSOR
OVERLOAD
PROTECTOR
M-COP-1000-230-3-60-A
M-COP-1000-400-3-50-A
M-COP-1000-460-3-60-A
M-COP-1000-575-3-60-A
4.9
ED—RD1000
02250195-266 R00
4.9
ED—RD1000
KEY
29
30
31
32
25
26
27
28
21
22
23
24
17
18
19
20
13
14
15
16
9
10
11
12
7
8
5
6
3
4
1
2
PART NUMBER DESCRIPTION
M-CMP-1000-460-3-60-A COMPRESSOR
M-CON-1000 CONDENSOR
M-FMT-1200-460-3-60
M-DRI-1000
FAN MOTOR ASSEMBLY
DRIER-DEHYDRATOR
M-EXC-1000
M-EXV-1000
M-BYY-1000
M-SPR-1000
HEAT EXCHANGER
EXPANSION VALVE
BY PASS VALVE
SEPARATOR
M-RCV-1000
M-HPS-1000
M-FNS-0400
M-LPS-1000
M-MKP-1000
M-MNS-2000
M-SLV-3000-24
M-MMV-1000
LIQUID RECEIVER
HIGH PRESSURE SECURITY SWITCH
FAN ON/OFF SWITCH
LOW PRESSURE SWITCH
MIKROPROCESSOR
MAIN SWITCH
SOLENOID VALVE
MEMBRANE VALVE
M-MMM-1000
M-CFR-1000
M-CSI-1000
M-CRE-1000
M-CTO-1000
M-CBA-1000
M-CBL-1000
M-HP1-1000
M-HP2-1000
M-CTC-3000
M-CPS-3000
M-STU-3000
M-FAS-3000
M-NUT-3000
M-SCR-3000
M-TRF-1000
MEMBRANE
CABINET FRONT
CABINET SIDE
CABINET REAR
CABINET TOP
CABINET BASE
CABINET LEG
CABINETHORIZONTAL PROFILE 1
CABINET HORIZONTAL PROFILE 2
CABINET TOP CORNER
CABINET HANDLE
CABINET STUD AND NUT
CABINET FASTENER
CAGE NUT AND SCREW
SCREW TYPE 2
TRANSFORMER
QTY
12
16
16
1
8
12
2
4
4
2
1
1
2
1
1
1
1
1
1
1
1
1
1
1
1
1
2
1
1
1
1
1
KEY
33
34
35
36
37
PART NUMBER
M-PPR-1000
M-CNT-1000
M-FCN-1000
M-COP-1000-460-3-60-A
M-FOP-3000
DESCRIPTION
PHASE PROTECTION RELAY
CONTACTOR
FAN CONTACTOR
COMPRESSOR OVERLOAD
PROTECTOR
FAN OVERLOAD PROTECTOR
QTY
1
1
1
1
1
4.10 ED—RD1000 AIR COOLED
02250196-592 R00
4.10 ED—RD1000 AIR COOLED
KEY
13
14
15
16
9
10
11
12
17
18
7
8
5
6
3
4
1
2
PART NUMBER
SEE REF. TABLE
M-CON-1000
SEE REF. TABLE
M-DRI-1000
M-EXC-1000
M-EXV-1000
M-BYV-1200
M-SPR-2000
M-RCV-1000
M-HPS-6000
M-FNS-0400
M-LPS-6000
M-MKP-6000
M-MNS-1600
M-SLV-6000-24
M-MMV-6000
M-MMM-6000
M-CFR-1000
DESCRIPTION
COMPRESSOR
CONDENSER
FAN MOTOR ASSEMBLY
DRIER-DEHYDRATOR
HEAT EXCHANGER
EXPANSION VALVE
BYPASS VALVE
SEPARATOR
LIQUID RECEIVER
HIGH PRESSURE SECURITY SWITCH
FAN ON/OFF SWITCH
LOW PRESSURE SWITCH
MIKROPROSESSOR
MAIN SWITCH
SELENOID VALVE
MEMBRANE VALVE
MEMBRANE
CABINET FRONT
QTY
1
1
1
1
1
1
2
1
1
1
1
1
2
2
2
1
1
1
KEY
31
32
33
34
35
27
28
29
30
23
24
25
26
19
20
21
22
36
37
PART NUMBER
M-CSI-1000
M-CRE-1000
M-CTO-1000
M-CBA-1000
M-CBL-1000
M-HP1-1000
M-HP2-1000
M-CTC-3000
M-CPS-3000
M-STU-3000
M-FAS-3000
M-NUT-3000
M-SCR-3000
M-TRF-6000
M-PPR-6000
M-CNT-1200
M-FCN-1200
M-COP-1200
M-FOP-1200
DESCRIPTION
CABINET SIDE
CABINET REAR
CABINET TOP
CABINET BASE
CABINET LEG
CABINET HORIZONTAL PROFILE 1
CABINET HORIZONTAL PROFILE 2
CABINET TOP CORNER
CABINET HANDLE
CABINET STUD AND NUT
CABINET FASTENER
CAGE NUT AND SCREW
SCREW TYPE 2
TRANSFORMER
PHASE PROTECTION RELAY
CONTACTOR
FAN CONTACTOR
COMPRESSOR OVERLOAD
PROTECTOR
FAN OVERLOAD PROTECTOR
QTY
16
1
1
1
2
8
12
12
16
2
4
4
2
1
1
2
1
1
2
DECAL
RD 1000
RD 1000
RD 1000
CAPACITY
1000 CFM
1000 CFM
1000 CFM
DRYER PART
NUMBER
02250193-921
02250193-985
02250194-140
POWER
RATINGS
400V/3Ph/50Hz
460V/3Ph/60Hz
575V/3Ph/60Hz
COOLING
AIR COOLED
AIR COOLED
AIR COOLED
COMPRESSOR
M-CMP-1000-460-3-60-A
M-CMP-1000-460-3-60-A
M-CMP-1000-575-3-60-A
FAN MOTOR
M-FMT-1200-400-3-50
M-FMT-1200-460-3-60
M-FMT-1200-575-3-60
4.11 ED—RD1200 AIR COOLED
02250196-593 R00
4.11 ED—RD1200 AIR COOLED
KEY
13
14
15
16
9
10
11
12
17
18
19
7
8
5
6
3
4
1
2
PART NUMBER DESCRIPTION
M-CMP-1200-460-3-60-A COMPRESSOR
M-CON-1000 CONDENSER
SEE REF. TABLE
M-DRI-1200
FAN MOTOR ASSEMBLY
DRIER-DEHYDRATOR
M-EXC-1200
M-EXV-1200
M-BYV-1200
M-SPR-2000
HEAT EXCHANGER
EXPANSION VALVE
BYPASS VALVE
SEPARATOR
M-RCV-1200
M-HPS-6000
M-FNS-0400
M-LPS-6000
M-MKP-6000
M-MNS-1600
M-SLV-6000-24
M-MMV-6000
M-MMM-6000
M-CFR-1000
M-CSI-1000
LIQUID RECEIVER
HIGH PRESSURE SECURITY SWITCH
FAN ON/OFF SWITCH
LOW PRESSURE SWITCH
MIKROPROSESSOR
MAIN SWITCH
SELENOID VALVE
MEMBRANE VALVE
MEMBRANE
CABINET FRONT
CABINET SIDE
QTY
1
1
1
1
2
1
1
1
1
1
2
1
1
3
1
2
1
1
1
KEY
32
33
34
35
28
29
30
31
24
25
26
27
20
21
22
23
36
37
PART NUMBER
M-CRE-1000
M-CTO-1000
M-CBA-1000
M-CBL-1200
M-HP1-1200
M-HP2-1200
M-CTC-3000
M-CPS-3000
M-STU-3000
M-FAS-3000
M-NUT-3000
M-SCR-3000
M-TRF-6000
M-PPR-6000
M-CNT-1200
M-FCN-1200
M-COP-1200
M-FOP-1200
DESCRIPTION
CABINET REAR
CABINET TOP
CABINET BASE
CABINET LEG
CABINET HORIZONTAL PROFILE 1
CABINET HORIZONTAL PROFILE 2
CABINET TOP CORNER
CABINET HANDLE
CABINET STUD AND NUT
CABINET FASTENER
CAGE NUT AND SCREW
SCREW TYPE 2
TRANSFORMER
PHASE PROTECTION RELAY
CONTACTOR
FAN CONTACTOR
COMPRESSOR OVERLOAD
PROTECTOR
FAN OVERLOAD PROTECTOR
QTY
1
2
1
1
12
12
16
16
4
8
2
2
1
4
1
1
1
2
DECAL
RD 1200
RD 1200
RD 1200
CAPACITY
1200 CFM
1200 CFM
1200 CFM
DRYER PART
NUMBER
02250193-922
02250193-986
02250194-141
POWER RATINGS
400V/3Ph/50Hz
460V/3Ph/60Hz
575V/3Ph/60Hz
COOLING
AIR COOLED
AIR COOLED
AIR COOLED
FAN MOTOR
M-FMT-1200-400-3-50
M-FMT-1200-460-3-60
M-FMT-1200-460-3-60
4.12 ED—RD1600 AIR COOLED
02250196-594 R00
4.12 ED—RD1600 AIR COOLED
14
15
16
17
18
10
11
12
13
KEY
7
8
5
6
9
3
4
1
2
PART NUMBER
M-CMP-1600-460-3-60-A
M-CON-1600
M-FMT-1600-460-3-60-A
M-DRI-2400
M-EXC-2000
M-EXV-2000
M-BYV-6000
M-SPR-2000
M-RCV-2000
M-HPS-6000
M-FNS-0400
M-LPS-6000
M-MKP-6000
M-MNS-1600
M-SLV-6000-24
M-MMV-6000
M-MMM-6000
M-CFR-6000
DESCRIPTION
COMPRESSOR
CONDENSER
FAN MOTOR ASSEMBLY
DRIER-DEHYDRATOR
HEAT EXCHANGER
EXPANSION VALVE
BYPASS VALVE
SEPARATOR
LIQUID RECEIVER
HIGH PRESSURE SECURITY
SWITCH
FAN ON/OFF SWITCH
LOW PRESSURE SWITCH
MIKROPROSESSOR
MAIN SWITCH
SELENOID VALVE
MEMBRANE VALVE
MEMBRANE
CABINET FRONT
QTY
1
1
2
1
1
2
1
1
1
1
1
1
1
1
1
1
1
2
DECAL
RD 1600
RD 1600
RD 1600
CAPACITY
1600 CFM
1600 CFM
1600 CFM
DRYER PART
NUMBER
02250193-923
02250193-988
02250194-142
POWER
RATINGS
COOLING
400V/3Ph/50Hz AIR COOLED
460V/3Ph/60Hz AIR COOLED
575V/3Ph/60Hz AIR COOLED
COMPRESSOR
M-CMP-1000-460-3-60-A
M-CMP-1000-460-3-60-A
M-CMP-1000-575-3-60-A
KEY
31
32
33
34
35
27
28
29
30
23
24
25
26
19
20
21
22
36
37
PART NUMBER
M-CSI-6000
M-CRE-6000
M-CTO-6000
M-CBA-6000
M-CBL-6000
M-HP1-2000
M-HP2-2000
M-CTC-3000
M-CPS-3000
M-STU-3000
M-FAS-3000
M-NUT-3000
M-SCR-3000
M-TRF-6000
M-PPR-6000
M-CNT-1200
M-FCN-6000
M-COP-1600
M-FOP-2000
DESCRIPTION
CABINET SIDE
CABINET REAR
CABINET TOP
CABINET BASE
CABINET LEG
CABINET HORIZONTAL PROFILE 1
CABINET HORIZONTAL PROFILE 2
CABINET TOP CORNER
CABINET HANDLE
CABINET STUD AND NUT
CABINET FASTENER
CAGE NUT AND SCREW
SCREW TYPE 2
TRANSFORMER
PHASE PROTECTION RELAY
CONTACTOR
FAN CONTACTOR
COMPRESSOR OVERLOAD
PROTECTOR
FAN OVERLOAD PROTECTOR
QTY
1
1
16
1
2
8
12
12
16
2
4
4
2
1
1
2
1
1
2
4.13 ED—RD2000 AIR COOLED
02250196-595 R00
4.13 ED—RD2000 AIR COOLED
14
15
16
17
10
11
12
13
18
19
KEY
7
8
5
6
9
3
4
1
2
PART NUMBER
M-CMP-2000-460-3-60-A
M-CON-2400
M-FMT-2000-460-3-60-A
M-DRI-2400
M-EXC-2000
M-EXV-2000
M-BYV-6000
M-SPR-2000
M-RCV-2000
M-HPS-6000
M-FNS-0400
M-LPS-6000
M-MKP-6000
M-MNS-3000
M-SLV-6000-24
M-MMV-6000
M-MMM-6000
M-CFR-2000
M-CSI-2000
DESCRIPTION
COMPRESSOR
CONDENSER
FAN MOTOR ASSEMBLY
DRIER-DEHYDRATOR
HEAT EXCHANGER
EXPANSION VALVE
BYPASS VALVE
SEPARATOR
LIQUID RECEIVER
HIGH PRESSURE SECURITY
SWITCH
FAN ON/OFF SWITCH
LOW PRESSURE SWITCH
MIKROPROSESSOR
MAIN SWITCH
SELENOID VALVE
MEMBRANE VALVE
MEMBRANE
CABINET FRONT
CABINET SIDE
QTY
1
1
2
1
1
2
1
1
1
1
1
1
1
1
2
1
1
1
2
DECAL
RD 2000
RD 2000
RD 2000
CAPACITY
2000 CFM
2000 CFM
2000 CFM
DRYER PART
NUMBER
02250193-924
02250193-989
02250194-143
POWER RATINGS
400V/3Ph/50Hz
460V/3Ph/60Hz
575V/3Ph/60Hz
COOLING
AIR COOLED
AIR COOLED
AIR COOLED
24
29
30
31
32
25
26
27
28
33
34
35
36
37
KEY
20
21
22
23
PART NUMBER
M-CRE-2000
M-CTO-2000
M-CBA-2000
M-CBL-2000
M-HP1-2000
M-HP2-2000
M-CTC-2000
M-CPS-2000
M-STU-2000
M-FAS-2000
M-NUT-6000
M-SCR-3000
M-TRF-6000
M-PPR-6000
M-CNT-2400
M-FCN-6000
M-COP-2400
M-FOP-2000
DESCRIPTION
CABINET REAR
CABINET TOP
CABINET BASE
CABINET LEG
CABINET HORIZONTAL PROFILE
1
CABINET HORIZONTAL PROFILE
2
CABINET TOP CORNER
CABINET HANDLE
CABINET STUD AND NUT
CABINET FASTENER
CAGE NUT AND SCREW
SCREW TYPE 2
TRANSFORMER
PHASE PROTECTION RELAY
CONTACTOR
FAN CONTACTOR
COMPRESSOR OVERLOAD
PROTECTOR
FAN OVERLOAD PROTECTOR
QTY
1
4
1
1
2
1
2
12
16
16
1
8
12
2
4
1
1
2
4.14 ED—RD2400 AIR COOLED
02250196-596 R00
4.14 ED—RD2400 AIR COOLED
KEY
13
14
15
16
9
10
11
12
17
18
7
8
5
6
3
4
1
2
PART NUMBER
M-CMP-2400-460-3-60-A
M-CON-2400
M-FMT-2000-460-3-60-A
M-DRI-2400
M-EXC-2400
M-EXV-2400
M-BYV-6000
M-SPR-2400
M-RCV-2400
M-HPS-6000
M-FNS-0400
M-LPS-6000
M-MKP-6000
M-MNS-3000
M-SLV-6000-24
M-MMV-6000
M-MMM-6000
M-CFR-2400
DESCRIPTION
COMPRESSOR
CONDENSER
FAN MOTOR ASSEMBLY
DRIER-DEHYDRATOR
HEAT EXCHANGER
EXPANSION VALVE
BYPASS VALVE
SEPARATOR
LIQUID RECEIVER
HIGH PRESSURE SECURITY SWITCH
FAN ON/OFF SWITCH
LOW PRESSURE SWITCH
MIKROPROSESSOR
MAIN SWITCH
SELENOID VALVE
MEMBRANE VALVE
MEMBRANE
CABINET FRONT
QTY
1
1
1
1
1
1
2
1
1
1
1
1
5
1
2
1
1
1
KEY
31
32
33
34
35
27
28
29
30
23
24
25
26
19
20
21
22
36
37
PART NUMBER
M-CSI-2400
M-CRE-2400
M-CTO-2400
M-CBA-2400
M-CBL-2400
M-HP1-2400
M-HP2-2400
M-CTC-2400
M-CPS-2400
M-STU-2400
M-FAS-2400
M-NUT-3000
M-SCR-3000
M-TRF-6000
M-PPR-6000
M-CNT-3000
M-FCN-6000
M-COP-2400
M-FOP-6000
DECAL
RD 2400
RD 2400
RD 2400
CAPACITY
2400 CFM
2400 CFM
2400 CFM
DRYER PART NUMBER POWER RATINGS
02250193-925
02250193-990
02250194-144
400V/3Ph/50Hz
460V/3Ph/60Hz
575V/3Ph/60Hz
COOLING
AIR COOLED
AIR COOLED
AIR COOLED
DESCRIPTION
CABINET SIDE
CABINET REAR
CABINET TOP
CABINET BASE
CABINET LEG
CABINET HORIZONTAL PROFILE 1
CABINET HORIZONTAL PROFILE 2
CABINET TOP CORNER
CABINET HANDLE
CABINET STUD AND NUT
CABINET FASTENER
CAGE NUT AND SCREW
SCREW TYPE 2
TRANSFORMER
PHASE PROTECTION RELAY
CONTACTOR
FAN CONTACTOR
COMPRESSOR OVERLOAD
PROTECTOR
FAN OVERLOAD PROTECTOR
QTY
16
1
1
1
2
8
12
12
16
2
4
4
2
1
1
2
1
1
2
4.15 ED—RD3000 AIR COOLED
02250196-597 R00
4.15 ED—RD3000 AIR COOLED
14
15
16
17
18
10
11
12
13
KEY
7
8
5
6
9
3
4
1
2
PART NUMBER DESCRIPTION
M-CMP-300-460-3-60-A COMPRESSOR
M-CON-3000 CONDENSER
M-FMT-2000-460-3-60-A FAN MOTOR ASSEMBLY
M-DRI-3800 DRIER-DEHYDRATOR
M-EXC-3000
M-EXV-3000
M-BYV-6000
M-SPR-5000
M-RCV-6000
M-HPS-6000
M-FNS-0400
M-LPS-6000
M-MKP-6000
M-MNS-3000
M-SLV-6000-24
M-MMV-6000
M-MMM-6000
M-CFR-3000
HEAT EXCHANGER
EXPANSION VALVE
BYPASS VALVE
SEPARATOR
LIQUID RECEIVER
HIGH PRESSURE SECURITY
SWITCH
FAN ON/OFF SWITCH
LOW PRESSURE SWITCH
MIKROPROSESSOR
MAIN SWITCH
SELENOID VALVE
MEMBRANE VALVE
MEMBRANE
CABINET FRONT
DECAL
RD 3000
RD 3000
RD 3000
CAPACITY
3000 CFM
3000 CFM
3000 CFM
DRYER PART NUMBER
02250193-926
02250193-991
02250194-145
POWER RATINGS
400V/3Ph/50Hz
460V/3Ph/60Hz
575V/3Ph/60Hz
QTY
1
1
6
1
1
3
1
1
1
1
1
1
1
1
1
1
1
2
KEY
31
32
33
34
35
27
28
29
30
23
24
25
26
19
20
21
22
36
37
COOLING
AIR COOLED
AIR COOLED
AIR COOLED
PART NUMBER
M-CSI-3000
M-CRE-3000
M-CTO-3000
M-CBA-3000
M-CBL-6000
M-HP1-3000
M-HP2-3000
M-CTC-3000
M-CPS-3000
M-STU-6000
M-FAS-3000
M-NUT-6000
M-SCR-3000
M-TRF-6000
M-PPR-6000
M-CNT-3000
M-FCN-3000
M-COP-3000
M-FOP-3000
DESCRIPTION
CABINET SIDE
CABINET REAR
CABINET TOP
CABINET BASE
CABINET LEG
CABINET HORIZONTAL PROFILE 1
CABINET HORIZONTAL PROFILE 2
CABINET TOP CORNER
CABINET HANDLE
CABINET STUD AND NUT
CABINET FASTENER
CAGE NUT AND SCREW
SCREW TYPE 2
TRANSFORMER
PHASE PROTECTION RELAY
CONTACTOR
FAN CONTACTOR
COMPRESSOR OVERLOAD
PROTECTOR
FAN OVERLOAD PROTECTOR
QTY
16
1
1
1
2
8
12
12
16
2
4
4
2
1
1
2
1
1
2
4.16 ED—RD3800 AIR COOLED
02250196-598 R00
4.16 ED—RD3800 AIR COOLED
KEY
13
14
15
16
9
10
11
12
17
18
7
8
5
6
3
4
1
2
PART NUMBER DESCRIPTION
M-CMP-3800-460-3-60-A COMPRESSOR
M-CON-3800 CONDENSER
M-FMT-2000-460-3-60-A FAN MOTOR ASSEMBLY
M-DRI-3000 DRIER-DEHYDRATOR
M-EXC-3800
M-EXV-3800
M-BYV-6000
M-SPR-5000
HEAT EXCHANGER
EXPANSION VALVE
BY PASS VALVE
SEPRARATOR
M-RCV-6000
M-HPS-6000
M-FNS-0400
M-LPS-6000
M-MKP-6000
M-MNS-6000
M-SLV-6000-24
M-MMV-6000
M-MMM-6000
M-CFR-3800
LIQUID RECEIVER
H9GH PRESSURE SECURITY SWITCH
FAN ON/OFF SWITCH
LOW PRESSURE SWITCH
MIKROPROSESSOR
MAIN SWITCH
SELENOID VALVE
MEMBRANE VALVE
MEMEBRANE
CABINET FRONT
QTY
1
1
1
1
1
1
2
2
1
1
1
1
1
1
4
1
1
1
KEY
31
32
33
34
27
28
29
30
35
36
37
38
23
24
25
26
19
20
21
22
PART NUMBER
M-SCI-3800
M-SCI-3800
M-CRE-3800
M-CTO-3800
M-CBA-3800
M-CBL-6000
M-HP1-3800
M-HP2-3800
M-CTC-3800
M-CPS-3800
M-STU-6000
M-FAS-3800
M-NUT-6000
M-SCR-3800
M-TRF-6000
M-PPR-6000
M-CNT-3800
M-FCN-6000
M-COP-3800
M-FOP-6000
DESCRIPTION
CABIENT SIDE-LEFT
CABINET SIDE-RIGHT
CABINET REAR
CABINET TOP
CABINET BASE
CABINET LEG
CABINET HORIZONTAL PROFILE 1
CABINET HORIZONTAL PROFILE 2
CABINET TOP CORNER
CABIENT HANDLE
CABINET STUD AND NUT
CABINET FASTENER
CAGE NUT AND SCREW
SCREW TYPE 2
TRANSFORMER
PHASE PROTECTION RELAY
CONTACTOR
FAN CONTACTOR
COMPRESSOR OVERLOAD PROTECTOR
FAN OVERLOAD PROTECTOR
QTY
16
16
1
1
12
12
4
8
1
2
1
2
2
2
1
4
1
1
1
1
DECAL
RD 3800
RD 3800
RD 3800
CAPACITY
3800 CFM
3800 CFM
3800 CFM
DRYER PART NUMBER
02250193-927
02250193-992
02250194-146
POWER RATINGS
400V/3PH/50HZ
460V/3PH/60HZ
575V/3PH/60HZ
COOLING
AIR COOLED
AIR COOLED
AIR COOLED
4.17 ED—RD5000 AIR COOLED
02250196-599 R00
4.17 ED—RD5000 AIR COOLED
KEY
13
14
15
16
9
10
11
12
17
18
19
7
8
5
6
3
4
1
2
PART NUMBER DESCRIPTION
M-CMP-5000-460-3-60-A COMPRESSOR
M-CON-5000 CONDENSER
M-FMT-5000-460-3-60-A
M-DRI-5000
FAN MOTOR ASSEMBLY
DRIER-DEHYDRATOR
M-EXC-5000
M-EXV-5000
M-BYV-6000
M-SPR-5000
HEAT EXCHANGER
EXPANSION VALVE
BY PASS VALVE
SEPARATOR
M-RCV-5000
M-HPS-6000
M-FNS-0400
M-LPS-6000
M-MKP-6000
M-MNS-6000
M-SLV-6000-24
M-MMV-6000
M-MMM-6000
M-CFR-5000
M-CSI-5000
LIQUID RECEIVER
HIGH PRESSURE SECURITY SWITCH
FAN ON/OFF SWITCH
LOW PRESSURE SWITCH
MIKROPROSESSOR
MAIN SWITCH
SELENOID VALVE
MEMBRANE VALVE
MEMBRANE
CABINET FRONT
CABINET SIDE-LEFT
QTY
1
1
1
1
2
1
1
1
1
1
1
1
1
1
1
6
1
1
1
DECAL
RD 5000
RD 5000
RD 5000
CAPACITY
5000 CFM
5000 CFM
5000 CFM
DRYER PART
NUMBER
02250193-928
02250193-993
02250194-147
POWER RATINGS
400V/3PH/50HZ
460V/3PH/60HZ
575V/3PH/60HZ
COOLING
AIR COOLED
AIR COOLED
AIR COOLED
KEY
32
33
34
35
36
28
29
30
31
24
25
26
27
20
21
22
23
37
38
PART NUMBER
M-CSI-5000
M-CRE-5000
M-CTO-5000
M-CBA-5000
M-CBL-6000
M-HP1-5000
M-HP2-5000
M-CTC-5000
M-CPS-5000
M-STU-6000
M-FAS-6000
M-NUT-6000
M-SCR-6000
M-TRF-6000
M-PPR-6000
M-CNT-5000
M-FCN-6000
M-COP-6000
M-FOP-6000
DESCRIPTION
CABINET SIDE-RIGHT
CABINET REAR
CABINET TOP
CABINET BASE
CABINET LEG
CABINET HORIZONTAL PROFILE 1
CABINET HORIZONTAL PROFILE 2
CABINET TOP CORNER
CABNET HANDLE
CABINET STUD AND NUT
CABINET FASTENER
CAGE NUT AND SCREW
SCREW TYPE 2
TRANSFORMER
PHSE PROTECTION RELAY
CONTACTOR
FAN CONTACTOR
COMPRESSOR OVERLOAD
PROTECTOR
FAN OVERLOAD PROTECTOR
QTY
16
1
1
1
2
8
12
12
16
2
4
4
2
1
1
1
1
1
2
4.18 ED—RD6000 AIR COOLED
02250196-600 R00
4.18 ED—RD6000 AIR COOLED
KEY
13
14
15
16
9
10
11
12
17
18
19
20
7
8
5
6
3
4
1
2
PART NUMBER
M-CMP-6000-460-3-60-A
M-CON-6000
M-FMT-6000-460-3-60-A
M-DRI-6000
M-EXC-6000
M-EXV-6000
M-BYV-6000
M-SPR-6000
M-RCV-0850
M-HPS-6000
M-FNS-0400
M-LPS-6000
M-MKP-6000
M-MNS-6000
M-SLV-6000-24
M-MMV-6000
M-MMM-6000
M-CFR-6000
M-CSI-6000
M-CRE-6000
DESCRIPTION
COMPRESSOR
CONDENSER
FAN MOTOR ASSEMBLY
DRIER-DEHYDRATOR
HEAT EXCHANGER
EXPANSION VALVE
BYPASS VALVE
SEPARATOR
LIQUID RECEIVER
HIGH PRESSURE SECURITY SWITCH
FAN ON/OFF SWITCH
LOW PRESSURE SWITCH
MIKROPROSESSOR
MAIN SWITCH
SELENOID VALVE
MEMBRANE VALVE
MEMBRANE
CABINET FRONT
CABINET SIDE
CABINET REAR
QTY
1
1
1
1
3
1
1
1
2
1
1
1
1
1
2
1
6
1
1
1
KEY
33
34
35
29
30
31
32
25
26
27
28
21
22
23
24
36
37
DECAL
RD 6000
RD 6000
RD 6000
CAPACITY
6000 CFM
6000 CFM
6000 CFM
DRYER PART NUMBER
02250193-929
02250193-994
02250194-148
POWER RATINGS
400V/3PH/50HZ
460V/3PH/60HZ
575V/3PH/60HZ
COOLING
AIR COOLED
AIR COOLED
AIR COOLED
PART NUMBER
5-CTO-6000
M-CBA-6000
M-CBL-6000
M-HP1-6000
M-HP2-6000
M-CTC-6000
M-CPS-6000
M-STU-6000
M-FAS-6000
M-NUT-6000
M-SCR-6000
M-TRF-6000
M-PPR-6000
M-CNT-6000
M-FCN-6000
M-COP-6000
M-FOP-6000
DESCRIPTION
CABINET TOP
CABINET BASE
CABINET LEG
CABINET HORIZONTAL PROFILE 1
CABINET HORIZONTAL PROFILE 2
CABINET TOP CORNER
CABINET HANDLE
CABINET STUD AND NUT
CABINET FASTENER
CAGE NUT AND SCREW
SCREW TYPE 2
TRANSFORMER
PHASE PROTECTION RELAY
CONTACTOR
FAN CONTACTOR
COMPRESSOR OVERLOAD
PROTECTOR
FAN OVERLOAD PROTECTOR
QTY
1
1
2
12
16
16
1
8
12
2
4
4
2
1
1
1
2
4.19 ID—RD400
02250195-264
4.20 ID—RD500-850
02250195-266
4.20 ID—RD500-850
DRYER PART NUMBER
02250193-918
02250193-850
02250193-982
02250193-137
02250193-919
02250193-851
02250193-983
02250193-138
02250193-920
02250193-852
02250193-984
02550193-139
POWER RATINGS
400v/3Ph/50Hz
230V/3Ph/60Hz
460V/3Ph/60Hz
575V/3Ph/60Hz
400V/3Ph/50Hz
230V/3Ph/60Hz
460V/3Ph/60Hz
575V/3Ph/60Hz
400V/3Ph/50Hz
230V/3Ph/60Hz
460V/3Ph/60Hz
575V/3Ph/60Hz
WITHOUT PALLET SIZE WITH PALLETT SIZE
29.33”*33.27”*50”
745mm*845mm*1270mm
34.25”*48.43”*59.45
870mm*1230mm
1510mm
COOLING
AIR COOLED
AIR COOLED
AIR COOLED
AIR COOLED
AIR COOLED
AIR COOLED
AIR COOLED
AIR COOLED
AIR COOLED
AIR COOLED
AIR COOLED
AIR COOLED
GROSS
WEIGHT
807 LB
847 LB
952 LB
NET
WEIGHT
794 LB
835 LB
941 LB
DECAL
RD500
RD500
RD500
RD500
RD700
RD700
RD700
RD700
RD850
RD850
RD850
RD850
DRYER
RB 500
RD 700
RD 850
E
2” NPT-F
3” NPT-M
3” NPT-M
D
14.76”
14.17”
14.17
C
10.04”
11.61”
11.61”
B
15.55”
15.55”
17.52”
A
34.25”
34.25”
37.2”
DECAL
RD500
RD700
RD850
4.21 ID—RD1000-1200 AIR COOLED
02250195-267
4.21 ID—RD1000-1200 AIR COOLED
DRYER PART NUMBER
02250193-921
02250193-985
022501934-140
02250193-922
02250193-986
02250194-141
POWER RATINGS
400V/3Ph/50Hz
460V/3Ph/60Hz
575V/3Ph/60Hz
400V/3Ph/50Hz
460V/3Ph/60Hz
575V/3Ph/60Hz
COOLING
AIR COOLED
AIR COOLED
AIR COOLED
AIR COOLED
AIR COOLED
AIR COOLED
WITHOUT PALLET SIZE
31.89”*45.87”*74.2”
810mm*1165mm*1885mm
WITH PALLETT SIZE
37”*52.28”*82.68”
940mm*1300mm*2100mm
GROSS
WEIGHT
1483 LB
1389 LB
DECAL
RD1000
RD1000
RD1000
RD1200
RD1200
RD1200
NET
WEIGHT
1230 LB
1146 LB
DRYER
RD 1200
RD 1000
4.22 ID—RD1000-1200 WATER COOLED
02250195-267
4.22 ID—RD1000-1200 WATER COOLED
DRYER PART NUMBER
02250193-949
02250194-109
02250194-163
02250193-950
02250194-110
02250194-164
POWER RATINGS
400V/3Ph/50Hz
460V/3Ph/60Hz
575V/3Ph/60Hz
400V/3Ph/50Hz
460V/3Ph/60Hz
575V/3Ph/60Hz
COOLING
WATER COOLED
WATER COOLED
WATER COOLED
WATER COOLED
WATER COOLED
WATER COOLED
WITHOUT PALLET SIZE
31.89”*45.87”*74.2”
810mm*1165mm*1885mm
WITH PALLETT SIZE
37”*51.18”*82.68”
940mm*1300mm*2100mm
GROSS
WEIGHT
1483 LB
1389 LB
DECAL
RD1000
RD1000
RD1000
RD1200
RD1200
RD1200
NET
WEIGHT
1230 LB
1146 LB
DRYER
RD 1200
RD 1000
4.23 ID—RD1600-2000 AIR COOLED
02250195-268
4.23 ID—RD1600-200 AIR COOLED
DRYER PART NUMBER
02250193-923
02250193-988
02250194-142
02250193-924
02250193-989
02250194-143
POWER RATINGS
400V/3Ph/50Hz
460V/3Ph/60Hz
575V/3Ph/60Hz
400V/3Ph/50Hz
460V/3Ph/60Hz
575V/3Ph/60Hz
COOLING
AIR COOLED
AIR COOLED
AIR COOLED
AIR COOLED
AIR COOLED
AIR COOLED
DECAL
RD1600
RD1600
RD1600
RD2000
RD2000
RD2000
4.24 ID—RD1600-2000 WATER COOLED
02250195-268
4.24 ID—RD1600-2000 WATER COOLED
DRYER PART NUMBER
02250193-951
02250194-113
02250194-165
02250193-953
02250194-114
02250194-166
POWER RATINGS
400V/3Ph/50Hz
460V/3Ph/60Hz
575V/3Ph/60Hz
400V/3Ph/50Hz
460V/3Ph/60Hz
575V/3Ph/60Hz
COOLING
WATER COOLED
WATER COOLED
WATER COOLED
WATER COOLED
WATER COOLED
WATER COOLED
DECAL
RD1600
RD1600
RD1600
RD2000
RD2000
RD2000
4.25 ID—RD2400-3000 AIR COOLED
02250195-269
4.25 ID—RD2400-3000 AIR COOLED
DRYER PART NUMBER
02250193-925
02250193-990
02250194-144
02250193-926
02250193-991
02250194-145
POWER RATINGS
400V/3Ph/50Hz
460V/3Ph/60Hz
575V/3Ph/60Hz
400V/3Ph/50Hz
460V/3Ph/60Hz
575V/3Ph/60Hz
COOLING
AIR COOLED
AIR COOLED
AIR COOLED
AIR COOLED
AIR COOLED
AIR COOLED
DECAL
RD2400
RD2400
RD2400
RD3000
RD3000
RD3000
4.26 ID—RD2400-3000 WATER COOLED
02250195-269
4.26 ID—RD2400-3000 WATER COOLED
DRYER PART NUMBER
02250193-954
02250194-115
02250194-167
02250193-955
02250194-116
02250194-168
POWER RATINGS
400V/3Ph/50Hz
460V/3Ph/60Hz
575V/3Ph/60Hz
400V/3Ph/50Hz
460V/3Ph/60Hz
575V/3Ph/60Hz
COOLING
WATER COOLED
WATER COOLED
WATER COOLED
WATER COOLED
WATER COOLED
WATER COOLED
DECAL
RD2400
RD2400
RD2400
RD3000
RD3000
RD3000
4.27 ID—RD3800 AIR COOLED
02250195-270
4.27 ID—RD3800 AIR COOLED
DRYER PART NUMBER
02250193-927
02250193-992
02250194-146
POWER RATINGS
400V/3Ph/50Hz
460V/3Ph/60Hz
575V/3Ph/60Hz
COOLING
AIR COOLED
AIR COOLED
AIR COOLED
DECAL
RD3800
RD3800
RD3800
4.28 ID—RD3800 WATER COOLED
02250195-270
4.28 ID—RD3800 WATER COOLED
DRYER PART NUMBER
02250193-956
02250194-117
02250194-169
POWER RATINGS
400V/3Ph/50Hz
460V/3Ph/60Hz
575V/3Ph/60Hz
COOLING
WATER COOLED
WATER COOLED
WATER COOLED
DECAL
RD3800
RD3800
RD3800
4.29 P&I—RD400
02250195-291
4.29 P&I—RD400
POS.
DESCRIPTION
6
7
4
5
1
2
3
COMPRESSOR
REFRIGERANT CONDENSER
FAN MOTOR
FAN MOTOR SWITCH
EVAPORATOR
AIR-AIR EXCHANGER
PRESSURE REGULATOR
10
11
8
9
DEHYDRATOR
DEW POINT INDICATOR
BY-PASS VALVE
LIQUID RECEIVER
NOTE: MARK/TAG COMPONENT/CONTAINER WITH SULLAIR P/N
AND REVISION
MODEL
RD400
REFRIGERANT TYPE
R134A
LB
6.613
4.30 P&I—RD500-850
02250195-293
4.30 P&I—RD500-850
POS.
DESCRIPTION
6
7
4
5
1
2
3
COMPRESSOR
REFRIGERANT CONDENSER
FAN MOTOR
FAN MOTOR SWITCH
EVAPORATOR
AIR-AIR EXCHANGER
PRESSURE REGULATOR
10
11
8
9
DEHYDRATOR
DEW POINT INDICATOR
BY-PASS VALVE
LIQUID RECEIVER
12 LIQUID SEPARATOR
NOTE: MARK/TAG COMPONENT/CONTAINER WITH SULLAIR P/N AND
REVISION
MODEL
RD500
RD700
RD850
REFRIGERANT TYPE
R134A
LB
8.818
9.369
11.023
4.31 P&I—RD700-850
02250195-294
4.31 P&I—RD700-850
POS.
DESCRIPTION
6
7
4
5
1
2
3
COMPRESSOR
WATER CONDENSER
EVAPORATOR
AIR-AIR EXCHANGER
PRESSURE REGULATOR
DEHYDRATOR
DEW POINT INDICATOR
8
9
BY-PASS VALVE
LIQUID RECEIVER
10 LIQUID SEPARATOR
NOTE: MARK/TAG COMPONENT/CONTAINER WITH SULLAIR P/N AND
REVISION.
MODEL
RD700
RD850
REFRIGERANT TYPE
R134A
LB
9.369
11.023
4.32 P&I—RD1000-6000
02250195-297
MODEL
RD1000
RD1200
RD1600
RD2000
RD2400
RD3000
RD3800
RD5000
RD6000
4.32 P&I—RD1000-6000
POS.
DESCRIPTION
6
7
4
5
1
2
3
COMPRESSOR
REFRIGERANT CONDENSER
FAN MOTOR
FAN MOTOR SWITCH
DEHYDRATOR
BY-PASS VALVE
LIQUID RECEIVER
8
9
LIQUID SEPARATOR
PRESSURE REGULATOR
10 ALUMINIUM BRAZED PLATE HEAT EXCHANGER
NOTE: MARK/TAG COMPONENT/CONTAINER WITH SULLAIR P/N AND
REVISION.
REFRIGERANT TYPE
R134A
4.33 P&I—RD1000-6000
02250195-298
MODEL
RD1000
RD1200
RD1600
RD2000
RD2400
RD3000
RD3800
RD5000
RD6000
4.33 P&I—RD1000-6000
POS.
DESCRIPTION
6
7
4
5
1
2
3
COMPRESSOR
WATER CONDENSER
DEHYDRATOR
BY-PASS VALVE
LIQUID RECEIVER
LIQUID SEPARATOR
PRESSURE REGULATOR
8 ALUMINIUM BRAZED PLATE HEAT EXCHANGER
NOTE: MARK/TAG COMPONENT/CONTAINER WITH SULLAIR P/N
AND REVISION.
REFRIGERANT TYPE
R134A
4.34 WIRING DIAGRAM—RD400 (230-3-60-A)
02250195-313-1
4.34 WIRING DIAGRAM—RD400 (230-3-60-A)
COMP DESCRIPTION
A01
A30
B01
B15
Control circuit transformer
Compressor chankaser heater
Main terminal block
Control circuit supply
EMR4 Phase protection relay
F1, F2, F3 A01 Primary protection
F13
K01
Control circuit protection
Compressor contactor (24V)
K10
M01
M10
P01
P10
S01
Fan contactor (24V)
Compressors
Fan motor
Thermal protection off-on compressor
Over load protector
Main switch
4.35 WIRING DIAGRAM—RD400 (230-3-60-A)
02250195-313-2
4.35 WIRING DIAGRAM—RD400 (230-3-60-A)
COMP
K01
K10
A10
A11
S06
S10
S11
S12
F10,F11
P01
P02
P10
P11
EMR4
S02
S03
S04
S05
PT3
PT4
PT5
PT6
B16
A20
A41
PT1
PT2
DESCRIPTION
Control Circuit Protection
Thermal Protection Off-on Compressor
Compressor Heat Thermal Protector
Thermal Protection Off-on Fan
Fan Heat Thermal Protector
Phase Protection Relay
Remote Control Start Button
Remote Control Stop Button
Obstruction For Manual On/off
Remote Control Contact
Service Contact
Fan Pressure Switch
High Pressure Security Control 2
Low Pressure Security Control 1
Compressor Motor Relay
Fan Motor Relay
Remote Control Running Lamp (Green)
Remote Control Stand-by Lamp (Red)
Electronic Timer Supply
Remote Control Alarm Contact
Inlet Air Temperature Sensor (Pt100)
Heat Exchanger Temperature Sensor (Pt100)
Low Pressure Line Sensor (Pt100)
High Pressure Line Sensor (Pt100)
Ambient Temperature Sensor (Pt100)
Condenser Exit Temperature Sensor (Pt100)
Computer Control
4.36 WIRING DIAGRAM—RD400 (460-3-60-A, 400-3-50-A)
02250195-974-1
4.36 WIRING DIAGRAM—RD400 (460-3-60-A, 400-3-50-A)
COMP DESCRIPTION
F13
K01
M01
M10
P01
P10
S01
A01
A30
B01
B15
Control Circuit Transformer
Compressor Chankaser Heaters
Main Terminal Block
Control Circuit Supply
EMR4 Phase Protection Relay
F1,F2,F3 Emr4 Poverload Protection
F4
F5
A01 Primary Protection
A40 Overload Protection
Control Circuit Protection
Compressor Contactor (24v)
Compressor Motor
Fan Motor
Thermal Protection Off-on Compressor
Fan Motor Over Load Protector
Main Switch
4.37 WIRING DIAGRAM—RD400 (460-3-60-A, 400-3-50-A)
02250195-974-2
4.37 WIRING DIAGRAM—RD400 (460-3-60-A, 400-3-50-A)
COMP DESCRIPTION
PT1
PT2
PT3
PT4
A10
A11
A20
A41
S04
S05
S06
S10
S11-2
S11-1
K01
K10
F10,F11 Control Circuit Protection
P01 Thermal Protection Off-on Compressor
P02
P10
Compressor Heat Thermal Protector
Thermal Protection Off-on Fan
S30
EMR4
S02
S03
Fan Heat Thermal Protector
Phae Protection Relay
Remote Control Start Button
Remote Control Stop Button
Obstruction For Manual On/off
Remote Control Contact
Service Contact
Fan Pressure Switch
High Pressure Security Control 2
Low Pressure Security Control 1
Compressor Motor Relay
Fan Motor Relay
Remote Control Running Lamp (Green)
Remote Control Stand-by Lamp (Red)
Electronic Timer Supply
Remote Control Alarm Contact
Inlet Air Temperature Sensor (Pt100)
Heat Exchanger Temperature Sensor (Pt100)
Low Pressure Line Sensor (Pt100)
High Pressure Line Sensor (Pt100)
COMP
PT5
PT6
B16
HP
LP
TH
DESCRIPTION
Ambient Temperature Sensor (Pt100)
Condenser Exit Temperature Sensor (Pt100)
Computer Control
Indicated High Pressure
Indicated Low Pressure
Indicated High Temperature In The Circuit
4.38 WIRING DIAGRAM—RD500/700 (230-3-60-A)
02250195-975-1
4.38 WIRING DIAGRAM—RD500/700 (230-3-60-A)
COMP DESCRIPTION
F13
K01-1
K01-2
K10
M01
M10-1
M10-2
P01
P10
S01
A01
A30
B01
B15
Control Circuit Transformer
Compressor Chankaser Heaters
Main Terminal Block
Control Circuit Supply
EMR4 Phase Protection Relay
F1,F2,F3 Emr4 Poverload Protection
F4
F5
A01 Rimary Protection
A30 Overload Protection
Control Circuit Protection
Compressor Contactor (24v)
Compressor Contactor (24v)
Fan Contactor (24v)
Compressor Motor
Fan Motor
Fan Motor
Thermal Protection Off-on Compressor
Fan Motor Over Load Protector
Main Switch
4.39 WIRING DIAGRAM—RD500/700 (230-3-60-A)
02250195-975-2
4.39 WIRING DIAGRAM—RD500/700 (230-3-60-A)
COMP DESCRIPTION
S11-1
S11-2
K01
K10-1
K10-2
A20
A10
A11
A41
PT1
PT2
S30-1
S30-2
EMR4
S04
S05
S06
S10-1
S10-2
F10,F11 Control Circuit Protection
S02
S03
Remote Control Start Button
Remote Control Stop Button
P01
P02
P10-1
P10-2
Thermal Protection Off-on Compressor
Compressor Heat Thermal
Thermal Protection Off-on Fan 1
Thermal Protection Off-on Fan 2
Fan Heat Thermal 1
Fan Heat Thermal 2
Phase Protection Relay
Remote Control Contact
Obstruction For Manual On/0ff
Service Contact
Fan Pressure Switch 1
Fan Pressure Switch 2
Low Pressure Security Control 1
High Pressure Security Control 2
Compressor Motor Relay
Ran Motor Relay 1
Fan Motor Relay 2
Electronic Timer Supply
Remote Control Running Lamp (Green)
Remote Control Stand-by Lamp (Red_
Remote Control Alarm Contact
Inlet Air Temperature Sensor (Pt100)
Heat Exchanger Temperature Sensor (Pt100)
COMP
PT3
PT4
PT5
PT6
B16
HP
LP
TH
DESCRIPTION
Low Pressure Line Sensor (Pt100)
High Pressure Line Sensor (Pt100)
Ambient Temperature Sensor (Pt100)
Condenser Exit Temperature Sensor (Pt100)
Computer Control
Indicates High Pressure
Indicates Low Pressure
Indicates High Temperature In The Circuit
4.40 WIRING DIAGRAM—
RD (500/700/850-1000-1200-1600-2000-2400-3000-3800-5000-6000)-460-3-60-A, 400-3-50-A
02250195-314-1
4.40 WIRING DIAGRAM—
RD (500/700/850-1000-1200-1600-2000-2400-3000-3800-5000-6000)-460-3-60-A, 400-3-50-A
COMP DESCRIPTION
F13
K01-1
K01-2
K10
M01
M10-1
M10-2
P01
P10
S01
A01
A30
B01
B15
Control circuit transformer
Compressor chankaser heater
Main terminal block
Control circuit supply
EMR4 Phase protection relay
F1, F2, F3 EMR4 Poverload Protection
F4
F5
A01 Primary Protection
A30 Overload Protection
Control circuit protection
Compressor contactor (24V)
Compressor contactor (24V)
Fan contactor (24V)
Compressor
Fan motor
Fan motor
Thermal protection off-on compressor
Over load protector
Main switch
4.41 WIRING DIAGRAM—
RD (500/700/850-1000-1200-1600-2000-2400-3000-3800-5000-6000)-460-3-60-A, 400-3-50-A
02250195-314-2
4.41 WIRING DIAGRAM—
RD (500/700/850-1000-1200-1600-2000-2400-3000-3800-5000-6000)-460-3-60-A, 400-3-50-A
COMP DESCRIPTION
S11-1
S11-2
K01
K10-1
K10-2
A20
A10
A11
A41
PT1
PT2
S30-1
S30-2
EMR4
S04
S05
S06
S10-1
S10-2
F10,F11 Control Circuit Protection
S02
S03
Remote Control Start Button
Remote Control Stop Button
P01
P02
P10-1
P10-2
Thermal Protection Off-on Compressor
Compressor Heat Thermal
Thermal Protection Off-on Fan 1
Thermal Protection Off-on Fan 2
Fan Heat Thermal 1
Fan Heat Thermal 2
Phase Protection Relay
Remote Control Contact
Obstruction For Manual On/0ff
Service Contact
Fan Pressure Switch 1
Fan Pressure Switch 2
Low Pressure Security Control 1
High Pressure Security Control 2
Compressor Motor Relay
Ran Motor Relay 1
Fan Motor Relay 2
Electronic Timer Supply
Remote Control Running Lamp (Green)
Remote Control Stand-by Lamp (Red_
Remote Control Alarm Contact
Inlet Air Temperature Sensor (Pt100)
Heat Exchanger Temperature Sensor (Pt100)
COMP
PT3
PT4
PT5
PT6
B16
HP
LP
TH
DESCRIPTION
Low Pressure Line Sensor (Pt100)
High Pressure Line Sensor (Pt100)
Ambient Temperature Sensor (Pt100)
Condenser Exit Temperature Sensor (Pt100)
Computer Control
Indicates High Pressure
Indicates Low Pressure
Indicates High Temperature In The Circuit
4.42 WIRING DIAGRAM—RD700-850 (230-3-60-W)
02250195-976-1
4.42 WIRING DIAGRAM—RD700-850 (230-3-60-W)
COMP DESCRIPTION
A01
A30
B01
B15
Control circuit transformer
Compressor chankaser heater
Main terminal block
Control circuit supply
EMR4 Phase protection relay
F1, F2, F3 EMR4 Poverload Protection
F4
F5
A01 Primary Protection
A30 Overload Protection
F13
K01
M01
P01
S01
Control circuit protection
Compressor contactor (24V)
Compressor
Thermal protection off-on compressor
Main switch
4.43 WIRING DIAGRAM—RD700-850 (230-3-60-W)
02250195-976-2
4.43 WIRING DIAGRAM—RD700-850 (230-3-60-W)
COMP DESCRIPTION
A10
A11
A41
PT1
PT2
PT3
PT4
PT5
PT6
B16
S05
S06
S10-1
S10-2
S11-1
S11-2
K01
A20
F10,F11 Control Circuit Protection
S02
S03
Remote Control Start Button
Remote Control Stop Button
P01
P02
EMR4
S04
Thermal Protection Off-on Compressor
Compressor Heat Thermal
Phase Protection Relay
Remote Control Contact
Obstruction For Manual On/off
Service Contact
Fan Pressure Switch 1
Fan Pressure Switch 2
Low Pressure Security Control 1
High Pressure Security Control 2
Compressor Motor Relay
Electronic Timer Supply
Remote Control Running Lamp (Green)
Remote Control Stand-by Lamp (Red)
Remote Control Alarm Contact
Inlet Air Temperature Sensor (Pt100)
Heat Exchanger Temperature Sensor (Pt100)
Low Pressure Line Sensor (Pt100)
High Pressure Line Sensor (Pt100)
Ambient Temperature Sensor (Pt100)
Condenser Exit Temperature Sensor (Pt100)
Computer Control
4.44 WIRING DIAGRAM—
RD (700-850-1000-1200-1600-2000-2400-3000-3800-5000-6000) 460-3-60-W, 400-3-50-W
02250195-976-1
4.44 WIRING DIAGRAM—
RD (700-850-1000-1200-1600-2000-2400-3000-3800-5000-6000) 460-3-60-W, 400-3-50-W
COMP DESCRIPTION
A01
A30
B01
B15
Control circuit transformer
Compressor chankaser heater
Main terminal block
Control circuit supply
EMR4 Phase protection relay
F1, F2, F3 A01 Primary protection
F13
K01
Control circuit protection
Compressor contactor (24V)
M01
P01
S01
Compressor
Thermal protection off-on compressor
Main switch
4.45 WIRING DIAGRAM—
RD (700-850-1000-1200-1600-2000-2400-3000-3800-5000-6000) 460-3-60-W, 400-3-50-W
02250195-976-2
4.45 WIRING DIAGRAM—
RD (700-850-1000-1200-1600-2000-2400-3000-3800-5000-6000) 460-3-60-W, 400-3-50-W
COMP DESCRIPTION
EMR4
S04
S05
S06
S10-1
S10-2
S11-1
S11-2
F1,F2 A01 Primary protection
F10, F11 Control circuit protection
A01 Control circuit transformer
S02
S03
P01
P02
Remote control start button
Remote control stop button
Thermal protection off-on compressor
Compressor heat thermal
K01
A20
A10
A11
A41
Phase protection relay
Remote control contact
Obstruction for manual on/off
Service contact
Fan pressure switch 1
Fan pressure switch 2
Low pressure security control 1
High pressure security control 2
Compressor motor relay
Electronic timer supply
Remote control running lamp (Green)
Remote control stand-by lamp (red)
Remote control alarm contact
4.46 CONTROL CIRCUIT—RD400-500-700-850-1000-1200-1600-2000-2400-3000-3800-5000-6000
02250195-307
4.46 CONTROL CIRCUIT—RD400-500-700-850-1000-1200-1600-2000-2400-3000-3800-5000-6000
COMP DESCRIPTION
S10-2
S11-1
S11-2
K01
K10-1
K10-2
A10
A11
P10-2
P11-1
P11-2
EMR4
S04
S05
S06
S10-1
F1,F2 Primary protection
F10,F11 Control circuit protection
A01
S02
Control circuit transformer
Remote control start button
S03
P01
P02
P10-1
Remote control stop button
Thermal protection off-on compressor
Compressor heat thermal
Thermal protection off-on fan 1
Thermal protection off-on fan 2
Fan heat thermal 1
Fan heat thermal 2
Phase protection relay
Remote control contact
Obstruction for manuall on/off
Service contact
Fan pressure switch 1
Fan pressure switch 2
Low pressure security control 1
High pressure security control 2
Compressor motor relay
Fan motoro relay 1
Fan motor relay 2
Remote control running lamp (green)
Remote control stand-by lamp (red)
COMP
A20
A41
DESCRIPTION
Drain valve
Remote control alarm contact
4.47 POWER CIRCUIT—RD400-500-700-850-1000-1200-1600-2000-2400-3000-3800-5000-6000
02250195-307
4.47 CONTROL CIRCUIT—RD400-500-700-850-1000-1200-1600-2000-2400-3000-3800-5000-6000
COMP DESCRIPTION
A01 Control circuit transformer
A30-1/A30-2 Compressor chankaser heaters
B01
EMR4
Main terminal block
Phase protection relay
F1,F2
K01
K10-1
K10-2
A01 primary protection
Compressor contactor (24V)
Fan contactor (24V)
Fan contactor (24V)
K20 Water motor
M01-1/M01-2 Compressors (400V-440V)
M10-1
M10-2
Fan motor (400V-440V)
Fan motor (400V-440V)
P01
P10-1
P10-2
P20
S01
Thermal protection of
Over load protector
Over load protector
Water motor protection
Main switch
1000.0
1250.0
1250.0
1600.0
1600.0
2000.0
2000.0
2500.0
2500.0
3000.0
3000.0
3800.0
3800.0
5000.0
5000.0
6000.0
6000.0
700.0
700.0
700.0
850.0
850.0
850.0
1000.0
400.0
400.0
400.0
500.0
500.0
500.0
Capacity
SCFM @
Rated
Conditions
AIR COOLED
MODEL REF
RD-0400-230-3-60-A
RD-0400-460-3-60-A
RD-0400-575-3-60-A
RD-0500-230-3-60-A
RD-0500-460-3-60-A
RD-0500-575-3-60-A
RD-0700-230-3-60-A
RD-0700-460-3-60-A
RD-0700-575-3-60-A
RD-0850-230-3-60-A
RD-0850-460-3-60-A
RD-0850-575-3-60-A
RD-1000-460-3-60-A
RD-1000-575-3-60-A
RD-1200-460-3-60-A
RD-1200-575-3-60-A
RD-1600-460-3-60-A
RD-1600-575-3-60-A
RD-2000-460-3-60-A
RD-2000-575-3-60-A
RD-2400-460-3-60-A
RD-2400-575-3-60-A
RD-3000-460-3-60-A
RD-3000-575-3-60-A
RD-3800-460-3-60-A
RD-3800-575-3-60-A
RD-5000-460-3-60-A
RD-5000-575-3-60-A
RD-6000-460-3-60-A
RD-6000-575-3-60-A
02250194-140
02250193-986
02250194-141
02250193-988
02250194-142
02250193-989
02250194-143
02250193-990
02250194-144
02250193-991
02250194-145
02250193-992
02250194-146
02250193-993
02250194-147
02250193-994
02250194-148
02250193-849
02250193-981
02250194-136
02250193-850
02250193-982
02250194-137
02250193-851
02250193-983
02250194-138
02250193-852
02250193-984
02250194-139
02250193-985
SULLAIR PART
WATER COOLED
MODEL REF
RD-0700-230-3-60-W
RD-0700-460-3-60-W
RD-0700-575-3-60-W
RD-0850-230-3-60-W
RD-0850-460-3-60-W
RD-0850-575-3-60-W
RD-1000-460-3-60-W
RD-1000-575-3-60-W
RD-1200-460-3-60-W
RD-1200-575-3-60-W
RD-1600-460-3-60-W
RD-1600-575-3-60-W
RD-2000-460-3-60-W
RD-2000-575-3-60-W
RD-2400-460-3-60-W
RD-2400-575-3-60-W
RD-3000-460-3-60-W
RD-3000-575-3-60-W
RD-3800-460-3-60-W
RD-3800-575-3-60-W
RD-5000-460-3-60-W
RD-5000-575-3-60-W
RD-6000-460-3-60-W
RD-6000-575-3-60-W
SULLAIR PART
02250193-861
02250194-107
02250194-161
02250193-862
700.0
700.0
700.0
850.0
02250194-108
02250194-162
850.0
850.0
02250194-109 1000.0
Rated
Flow
[1]
Pressure
Drop
Absorbed
Power scfm
400.0
(psid)
2.7
(kW)
2.13
Port
Size
Width Height Depth Weight
(in) in mm in mm in mm lbs kg
2" NPT 23.5 595 49.6 1260 28.3 718 341 155
400.0
400.0
500.0
500.0
500.0
2.7
2.7
3.9
3.9
3.9
2.19
2.1
2.7
2.88
2.6
2" NPT 23.5 595 49.6 1260 28.3 718
2" NPT 23.5 595 49.6 1260 28.3 718
341
341
155
155
2" NPT 31.9 810 58.9 1495 45.9 1166 1056 480
2" NPT 31.9 810 58.9 1495 45.9 1166 1056 480
2" NPT 31.9 810 58.9 1495 45.9 1166 1056 480
3.1
3.1
3.1
2.4
2.4
2.4
2.8
3.92
3.88
3.7
4.38
4.48
4.4
5.28
3" NPT 31.9 810 58.9 1495 45.9 1166 1056 480
3" NPT 31.9 810 58.9 1495 45.9 1166 1056 480
3" NPT 31.9 810 58.9 1495 45.9 1166 1056 480
3" NPT 31.9 810 58.9 1495 45.9 1166 1100 500
3" NPT 31.9 810 58.9 1495 45.9 1166 1100 500
3" NPT 31.9 810 58.9 1495 45.9 1166 1100 500
3" NPT 31.9 810 73.8 1875 45.9 1166 1122 510
02250194-163 1000.0
02250194-110 1250.0
02250194-164 1250.0
02250194-113 1600.0
02250194-165 1600.0
02250194-114 2000.0
02250194-166 2000.0
02250194-115 2500.0
02250194-167 2500.0
02250194-116 3000.0
02250194-168 3000.0
02250194-117 3800.0
02250194-169 3800.0
02250194-118 5000.0
02250194-170 5000.0
02250194-119 6000.0
02250194-171 6000.0
2.8
2.95
2.95
3.1
3.1
3.4
3.4
3.2
3.2
2.6
2.6
2.8
2.8
3.5
3.5
3.5
3.5
5.12
5.28
5.12
7.3
7.2
9
8.8
9.8
9.6
11.2
11
13.9
13.7
18.2
18
22.27
22.27
3" NPT 31.9 810 73.8 1875 45.9 1166 1122 510
3" NPT 31.9 810 73.8 1875 45.9 1166 1122 510
3" NPT 31.9 810 73.8 1875 45.9 1166 1122 510
4" FLG 45.9 1166 79.9 2030 61.0 1550 1672 760
4" FLG 45.9 1166 79.9 2030 61.0 1550 1672 760
4" FLG 45.9 1166 79.9 2030 61.0 1550 1705 775
4" FLG 45.9 1166 79.9 2030 61.0 1550 1705 775
4" FLG 45.9 1166 79.9 2030 82.7 2100 1925 875
4" FLG 45.9 1166 79.9 2030 82.7 2100 1925 875
4" FLG 45.9 1166 79.9 2030 82.7 2100 2156 980
4" FLG 45.9 1166 79.9 2030 82.7 2100 2156 980
6" FLG 45.9 1166 79.9 2030 110.3 2800 2409 1095
6" FLG 45.9 1166 79.9 2030 110.3 2800 2409 1095
6" FLG 45.9 1166 79.9 2030 110.3 2800 2420 1100
6" FLG 45.9 1166 79.9 2030 110.3 2800 2420 1100
8" FLG 45.9 1166 79.9 2030 118.1 3000 2750 1250
8" FLG 45.9 1166 79.9 2030 118.1 3000 2750 1250
GROUP
Non-Cycling
Non-Cycling
Non-Cycling
Non-Cycling
Non-Cycling
Non-Cycling
Non-Cycling
Non-Cycling
Non-Cycling
Non-Cycling
Non-Cycling
Non-Cycling
Non-Cycling
STANDARD
VOLTAGE
Capacity
SCFM @
Rated
Conditions
400/3/50
400/3/50
400/3/50
400/3/50
400/3/50
400/3/50
400/3/50
400/3/50
400/3/50
400/3/50
400/3/50
400/3/50
400/3/50
400.0
500.0
700.0
850.0
1000.0
1200.0
1600.0
2000.0
2400.0
3000.0
3800.0
5000.0
6000.0
AIR COOLED
MODEL REF
SULLAIR
PART
WATER COOLED
MODEL REF
SULLAIR
PART
Rated
Flow [1]
RD-0400-400-3-50-A 02250193-917
RD-0500-400-3-50-A
RD-0850-400-3-50-A
02250193-918
RD-0700-400-3-50-A 02250193-919 RD-0700-400-3-50-W 02250193-947
02250193-920 RD-0850-400-3-50-W 02250193-948 scfm
400.0
500.0
700.0
850.0
RD-1000-400-3-50-A 02250193-921 RD-1000-400-3-50-W 02250193-949 1000.0
RD-1200-400-3-50-A 02250193-922 RD-1200-400-3-50-W 02250193-950 1200.0
RD-1600-400-3-50-A 02250193-923 RD-1600-400-3-50-W 02250193-951 1600.0
RD-2000-400-3-50-A 02250193-924 RD-2000-400-3-50-W 02250193-953 2000.0
RD-2400-400-3-50-A 02250193-925 RD-2400-400-3-50-W 02250193-954 2400.0
RD-3000-400-3-50-A 02250193-926 RD-3000-400-3-50-W 02250193-955 3000.0
RD-3800-400-3-50-A 02250193-927 RD-3800-400-3-50-W 02250193-956 3800.0
RD-5000-400-3-50-A 02250193-928 RD-5000-400-3-50-W 02250193-958 5000.0
RD-6000-400-3-50-A 02250193-929 RD-6000-400-3-50-W 02250193-959 6000.0
Pressure
Drop
Absorbed
Power
2.5
2.5
2.8
2.8
3.5
3.5
(psid)
3.4
3.9
2.5
2.8
3.1
3.5
3.1
7.72
9.22
12.25
14.62
18.78
22.27
(kW)
1.92
2.35
3.45
3.64
3.64
4.5
5.54
4.48 SPARE PARTS
Component Name
Refrigerant Gas compressor compressor electric box
Condenser
Fan motor
Fan Blade fan grill
Drier-Dehydrator
Heat Exchanger
Evaporator (water Heat
Exchanger)
Flexible steel tube (inlet)
Flexible steel tube (outlet)
Expansion valve
By-pass valve separator
Liquid Receiver
High Pressure Security switch
Fan on/off switch
Low pressure switch
Thermostatic switch
Water pressure Switch
Water pressure switch timer
Water pump contactor
Water pump
Water Tank
Water Gauge
Microprosessor
Fan Overload Protector
Compressor Overload Protector
Thermostatic Gauge
RD-0400-230-3-60-A
R134a
M-CMP-400-230-3-60-A
N/A
M-CON-0400
M-FMT-0700-460-3-60
N/A
N/A
M-DRI-1000
2 x M-EXC-200
N/A
N/A
N/A
M-EXV-1000
M-BYV-1000
N/A
M-RCV-0850
M-HPS-1000
M-FNS-0400
M-LPS-1000
N/A
N/A
N/A
N/A
N/A
N/A
N/A
M-MKP-1000
M-FOP-3000
M-COP-400-230-3-60-A
N/A
RD-0400-460-3-60-A
R134a
M-CMP-400-460-3-60-A
N/A
M-CON-0400
M-FMT-0700-460-3-60
N/A
N/A
M-DRI-1000
2 x M-EXC-200
N/A
N/A
N/A
M-EXV-1000
M-BYV-1000
N/A
M-RCV-0850
M-HPS-1000
M-FNS-0400
M-LPS-1000
N/A
N/A
N/A
N/A
N/A
N/A
N/A
M-MKP-1000
M-FOP-3000
M-COP-400-460-3-60-A
N/A
RD-0400-400-3-50-A
R134a
M-CMP-400-400-3-50-A
N/A
M-CON-0400
M-FMT-0700-460-3-60
N/A
N/A
M-DRI-1000
2 x M-EXC-200
N/A
N/A
N/A
M-EXV-1000
M-BYV-1000
N/A
M-RCV-0850
M-HPS-1000
M-FNS-0400
M-LPS-1000
N/A
N/A
N/A
N/A
N/A
N/A
N/A
M-MKP-1000
M-FOP-3000
M-COP-400-400-3-50-A
N/A
M-RCV-0850
M-HPS-1000
M-FNS-0400
M-LPS-1000
N/A
N/A
N/A
N/A
N/A
N/A
N/A
M-MKP-1000
M-FOP-3000
BELL İ DE Ğİ L
N/A
RD-0400-575-3-60-A
R134a
BELL İ DE Ğİ L
N/A
M-CON-0400
BELL İ DE Ğİ L
N/A
N/A
M-DRI-1000
2 x M-EXC-200
N/A
N/A
N/A
M-EXV-1000
M-BYV-1000
N/A
RD-0500-230-3-60-A
R134a
M-CMP-500-230-3-60-A
N/A
M-CON-0500
M-FMT-0700-460-3-60
N/A
N/A
M-DRI-1000
3 X M-EXC-200
N/A
N/A
N/A
M-EXV-1000
M-BYV-1000
M-SPR-1000
M-RCV-0850
M-HPS-1000
2 X M-FNS-0400
M-LPS-1000
N/A
N/A
N/A
N/A
N/A
N/A
N/A
M-MKP-1000
M-FOP-3000
M-COP-500-230-3-60-A
N/A
Component Name
On/off Button
Main Switch
Contactor
Phase protection relay
Fan Contactor
Transformer
Secondary contact
Timer
Solenoid Valve
Membrane valve
Membrane
Water Separator
Cabinet Front
Cabinet Side - Left
Cabinet Side - Right
Cabinet Rear
Cabinet Top
Cabinet Base
Cabinette fastener
Cabinette Stud and Nut
Cabinet handle
Plastic Display cover
Cabinet Top Corners
Screws
Cage Nuts
Cabinet Legs
Cabinet Frame Top
Cabinette Horizontal profile 1
Cabinette Horizontal profile 2
M-CRE-0400
M-CTO-0400
M-CBA-0400
M-FAS-1000
M-STU-1000
M-CPS-1000
N/A
M-CTC-1000
M-SCR-1000
M-NUT-1000
M-CBL-0150
M-FRT-0150
M-HP1-0400
M-HP2-0400
RD-0400-230-3-60-A
N/A
M-MNS-0700
M-CNT-0400
M-PPR-1000
M-FCN-1000
M-TRF-1000
N/A
N/A
M-SLV-3000-24
M-MMV-1000
M-MMM-1000
N/A
M-CFR-0400
M-CLE-0400
M-CRI-0400
M-CRE-0400
M-CTO-0400
M-CBA-0400
M-FAS-1000
M-STU-1000
M-CPS-1000
N/A
M-CTC-1000
M-SCR-1000
M-NUT-1000
M-CBL-0150
M-FRT-0150
M-HP1-0400
M-HP2-0400
RD-0400-460-3-60-A
N/A
M-MNS-0700
M-CNT-0400
M-PPR-1000
M-FCN-1000
M-TRF-1000
N/A
N/A
M-SLV-3000-24
M-MMV-1000
M-MMM-1000
N/A
M-CFR-0400
M-CLE-0400
M-CRI-0400
M-CRE-0400
M-CTO-0400
M-CBA-0400
M-FAS-1000
M-STU-1000
M-CPS-1000
N/A
M-CTC-1000
M-SCR-1000
M-NUT-1000
M-CBL-0150
M-FRT-0150
M-HP1-0400
M-HP2-0400
RD-0400-400-3-50-A
N/A
M-MNS-0700
M-CNT-0400
M-PPR-1000
M-FCN-1000
M-TRF-1000
N/A
N/A
M-SLV-3000-24
M-MMV-1000
M-MMM-1000
N/A
M-CFR-0400
M-CLE-0400
M-CRI-0400
M-CRE-0400
M-CTO-0400
M-CBA-0400
M-FAS-1000
M-STU-1000
M-CPS-1000
N/A
M-CTC-1000
M-SCR-1000
M-NUT-1000
M-CBL-0150
M-FRT-0150
M-HP1-0400
M-HP2-0400
RD-0400-575-3-60-A
N/A
M-MNS-0700
M-CNT-0400
M-PPR-1000
M-FCN-1000
M-TRF-1000
N/A
N/A
M-SLV-3000-24
M-MMV-1000
M-MMM-1000
N/A
M-CFR-0400
M-CLE-0400
M-CRI-0400
M-CRE-0500
M-CTO-0500
M-CBA-0500
M-FAS-1000
M-STU-1000
M-CPS-1000
N/A
M-CTC-1000
M-SCR-1000
M-NUT-1000
M-CBL-0150
M-FRT-0150
M-HP1-0500
M-HP2-0500
RD-0500-230-3-60-A
N/A
M-MNS-0700
M-CNT-0850
M-PPR-1000
M-FCN-1000
M-TRF-1000
N/A
N/A
M-SLV-3000-24
M-MMV-1000
M-MMM-1000
N/A
M-CFR-0500
M-CLE-0500
M-CRI-0500
Component Name
Refrigerant Gas compressor compressor electric box
Condenser
Fan motor
Fan Blade fan grill
Drier-Dehydrator
Heat Exchanger
Evaporator (water Heat
Exchanger)
Flexible steel tube (inlet)
Flexible steel tube (outlet)
Expansion valve
By-pass valve separator
Liquid Receiver
High Pressure Security switch
Fan on/off switch
Low pressure switch
Thermostatic switch
Water pressure Switch
Water pressure switch timer
Water pump contactor
Water pump
Water Tank
Water Gauge
Microprosessor
Fan Overload Protector
Compressor Overload Protector
Thermostatic Gauge
On/off Button
RD-0500-400-3-50-A
R134a
M-CMP-500-400-3-50-A
N/A
M-CON-0500
M-FMT-0700-460-3-60
N/A
N/A
M-DRI-1000
3 X M-EXC-200
N/A
N/A
N/A
M-EXV-1000
M-BYV-1000
M-SPR-1000
M-RCV-0850
M-HPS-1000
2 X M-FNS-0400
M-LPS-1000
N/A
N/A
N/A
N/A
N/A
N/A
N/A
M-MKP-1000
M-FOP-3000
M-COP-500-400-3-50-A
N/A
N/A
RD-0500-460-3-60-A
R134a
M-CMP-500-460-3-60-A
N/A
M-CON-0500
M-FMT-0700-460-3-60
N/A
N/A
M-DRI-1000
3 X M-EXC-200
N/A
N/A
N/A
M-EXV-1000
M-BYV-1000
M-SPR-1000
M-RCV-0850
M-HPS-1000
2 X M-FNS-0400
M-LPS-1000
N/A
N/A
N/A
N/A
N/A
N/A
N/A
M-MKP-1000
M-FOP-3000
M-COP-500-460-3-60-A
N/A
N/A
RD-0500-575-3-60-A
R134a
M-CMP-500-575-3-60-A
N/A
M-CON-0500
M-FMT-0700-575-3-60
N/A
N/A
M-DRI-1000
3 X ADWIS400
N/A
N/A
N/A
M-EXV-1000
M-BYV-1000
M-SPR-1000
M-RCV-0850
M-HPS-1000
2 X M-FNS-0400
M-LPS-1000
N/A
N/A
N/A
N/A
N/A
N/A
N/A
M-MKP-1000
M-FOP-3000
M-COP-500-575-3-60-A
N/A
N/A
RD-0700-230-3-60-A
R134a
M-CMP-700-230-3-60-A
N/A
M-CON-0700
M-FMT-0700-230-3-60
N/A
N/A
M-DRI-1000
3 X M-EXC-200
N/A
N/A
N/A
M-EXV-0700
M-BYV-1000
M-SPR-1000
M-RCV-0850
M-HPS-1000
2 X M-FNS-0400
M-LPS-1000
N/A
N/A
N/A
N/A
N/A
N/A
N/A
M-MKP-1000
M-FOP-3000
M-COP-700-230-3-60-A
N/A
N/A
RD-0700-400-3-50-A
R134a
M-CMP-700-460-3-60-A
N/A
M-CON-0700
M-FMT-0700-460-3-50
N/A
N/A
M-DRI-1000
3 X M-EXC-200
N/A
N/A
N/A
M-EXV-0700
M-BYV-1000
M-SPR-1000
M-RCV-0850
M-HPS-1000
2 X M-FNS-0400
M-LPS-1000
N/A
N/A
N/A
N/A
N/A
N/A
N/A
M-MKP-1000
M-FOP-3000
M-COP-700-460-3-60-A
N/A
N/A
Component Name
Main Switch
Contactor
Phase protection relay
Fan Contactor
Transformer
Secondary contact
Timer
Solenoid Valve
Membrane valve
Membrane
Water Separator
Cabinet Front
Cabinet Side - Left
Cabinet Side - Right
Cabinet Rear
Cabinet Top
Cabinet Base
Cabinette fastener
Cabinette Stud and Nut
Cabinet handle
Plastic Display cover
Cabinet Top Corners
Screws
Cage Nuts
Cabinet Legs
Cabinet Frame Top
Cabinette Horizontal profile 1
Cabinette Horizontal profile 2
M-CTO-0500
M-CBA-0500
M-FAS-1000
M-STU-1000
M-CPS-1000
N/A
M-CTC-1000
M-SCR-1000
M-NUT-1000
M-CBL-0150
M-FRT-0150
M-HP1-0500
M-HP2-0500
RD-0500-400-3-50-A
M-MNS-0700
M-CNT-0850
M-PPR-1000
M-FCN-1000
M-TRF-1000
N/A
N/A
M-SLV-3000-24
M-MMV-1000
M-MMM-1000
N/A
M-CFR-0500
M-CLE-0500
M-CRI-0500
M-CRE-0500
M-CTO-0500
M-CBA-0500
M-FAS-1000
M-STU-1000
M-CPS-1000
N/A
M-CTC-1000
M-SCR-1000
M-NUT-1000
M-CBL-0150
M-FRT-0150
M-HP1-0500
M-HP2-0500
RD-0500-460-3-60-A
M-MNS-0700
M-CNT-0850
M-PPR-1000
M-FCN-1000
M-TRF-1000
N/A
N/A
M-SLV-3000-24
M-MMV-1000
M-MMM-1000
N/A
M-CFR-0500
M-CLE-0500
M-CRI-0500
M-CRE-0500
M-CTO-0500
M-CBA-0500
M-FAS-1000
M-STU-1000
M-CPS-1000
N/A
M-CTC-1000
M-SCR-1000
M-NUT-1000
M-CBL-0150
M-FRT-0150
M-HP1-0500
M-HP2-0500
RD-0500-575-3-60-A
M-MNS-0700
M-CNT-0850
M-PPR-1000
M-FCN-1000
M-TRF-1000
N/A
N/A
M-SLV-3000-24
M-MMV-1000
M-MMM-1000
N/A
M-CFR-0500
M-CLE-0500
M-CRI-0500
M-CRE-0500
M-CTO-0700
M-CBA-0700
M-FAS-1000
M-STU-1000
M-CPS-1000
N/A
M-CTC-1000
M-SCR-1000
M-NUT-1000
M-CBL-0150
M-FRT-0150
M-HP1-0700
M-HP2-0700
RD-0700-230-3-60-A
M-MNS-0700
M-CNT-0850
M-PPR-1000
M-FCN-1000
M-TRF-1000
N/A
N/A
M-SLV-3000-24
M-MMV-1000
M-MMM-1000
N/A
M-CFR-0700
M-CLE-0700
M-CRI-0700
M-CRE-0700
M-CTO-0700
M-CBA-0700
M-FAS-1000
M-STU-1000
M-CPS-1000
N/A
M-CTC-1000
M-SCR-1000
M-NUT-1000
M-CBL-0150
M-FRT-0150
M-HP1-0700
M-HP2-0700
RD-0700-400-3-50-A
M-MNS-0700
M-CNT-0850
M-PPR-1000
M-FCN-1000
M-TRF-1000
N/A
N/A
M-SLV-3000-24
M-MMV-1000
M-MMM-1000
N/A
M-CFR-0700
M-CLE-0700
M-CRI-0700
M-CRE-0700
Component Name
Refrigerant Gas compressor compressor electric box
Condenser
Fan motor
Fan Blade fan grill
Drier-Dehydrator
Heat Exchanger
Evaporator (water Heat
Exchanger)
Flexible steel tube (inlet)
Flexible steel tube (outlet)
Expansion valve
By-pass valve separator
Liquid Receiver
High Pressure Security switch
Fan on/off switch
Low pressure switch
Thermostatic switch
Water pressure Switch
Water pressure switch timer
Water pump contactor
Water pump
Water Tank
Water Gauge
Microprosessor
Fan Overload Protector
Compressor Overload Protector
Thermostatic Gauge
On/off Button
RD-0700-460-3-60-A
R134a
M-CMP-700-460-3-60-A
N/A
M-CON-0700
M-FMT-0700-460-3-60
N/A
N/A
M-DRI-1000
3 X M-EXC-200
N/A
N/A
N/A
M-EXV-0700
M-BYV-1000
M-SPR-1000
M-RCV-0850
M-HPS-1000
2 X M-FNS-0400
M-LPS-1000
N/A
N/A
N/A
N/A
N/A
N/A
N/A
M-MKP-1000
M-FOP-3000
M-COP-700-460-3-60-A
N/A
N/A
RD-0700-575-3-60-A
R134a
M-CMP-700-575-3-60-A
N/A
M-CON-0700
M-FMT-1200-575-3-60
N/A
N/A
M-DRI-1000
3 X M-EXC-200
N/A
N/A
N/A
M-EXV-0700
M-BYV-1000
M-SPR-1000
M-RCV-0850
M-HPS-1000
2 X M-FNS-0400
M-LPS-1000
N/A
N/A
N/A
N/A
N/A
N/A
N/A
M-MKP-1000
M-FOP-3000
M-COP-700-575-3-60-A
N/A
N/A
RD-0850-230-3-60-A
R134a
M-CMP-1000-230-3-60-A
N/A
M-CON-0850
M-FMT-1200-460-3-60
N/A
N/A
M-DRI-1000
4 X M-EXC-200
N/A
N/A
N/A
M-EXV-0850
M-BYV-1000
M-SPR-1000
M-RCV-0850
M-HPS-1000
2 X M-FNS-0400
M-LPS-1000
N/A
N/A
N/A
N/A
N/A
N/A
N/A
M-MKP-1000
M-FOP-3000
M-COP-1000-230-3-60-A
N/A
N/A
RD-0850-400-3-50-A
R134a
M-CMP-1000-460-3-50-A
N/A
M-CON-0850
M-FMT-1200-400-3-50
N/A
N/A
M-DRI-1000
4 X M-EXC-200
N/A
N/A
N/A
M-EXV-0850
M-BYV-1000
M-SPR-1000
M-RCV-0850
M-HPS-1000
2 X M-FNS-0400
M-LPS-1000
N/A
N/A
N/A
N/A
N/A
N/A
N/A
M-MKP-1000
M-FOP-3000
M-COP-1000-400-3-50-A
N/A
N/A
RD-0850-460-3-60-A
R134a
M-CMP-1000-460-3-60-A
N/A
M-CON-0850
M-FMT-1200-460-3-60
N/A
N/A
M-DRI-1000
4 X M-EXC-200
N/A
N/A
N/A
M-EXV-0850
M-BYV-1000
M-SPR-1000
M-RCV-0850
M-HPS-1000
2 X M-FNS-0400
M-LPS-1000
N/A
N/A
N/A
N/A
N/A
N/A
N/A
M-MKP-1000
M-FOP-3000
M-COP-1000-460-3-60-A
N/A
N/A
Component Name
Main Switch
Contactor
Phase protection relay
Fan Contactor
Transformer
Secondary contact
Timer
Solenoid Valve
Membrane valve
Membrane
Water Separator
Cabinet Front
Cabinet Side - Left
Cabinet Side - Right
Cabinet Rear
Cabinet Top
Cabinet Base
Cabinette fastener
Cabinette Stud and Nut
Cabinet handle
Plastic Display cover
Cabinet Top Corners
Screws
Cage Nuts
Cabinet Legs
Cabinet Frame Top
Cabinette Horizontal profile 1
Cabinette Horizontal profile 2
M-CTO-0700
M-CBA-0700
M-FAS-1000
M-STU-1000
M-CPS-1000
N/A
M-CTC-1000
M-SCR-1000
M-NUT-1000
M-CBL-0150
M-FRT-0150
M-HP1-0700
M-HP2-0700
RD-0700-460-3-60-A
M-MNS-0700
M-CNT-0850
M-PPR-1000
M-FCN-1000
M-TRF-1000
N/A
N/A
M-SLV-3000-24
M-MMV-1000
M-MMM-1000
N/A
M-CFR-0700
M-CLE-0700
M-CRI-0700
M-CRE-0700
M-CTO-0700
M-CBA-0700
M-FAS-1000
M-STU-1000
M-CPS-1000
N/A
M-CTC-1000
M-SCR-1000
M-NUT-1000
M-CBL-0150
M-FRT-0150
M-HP1-0700
M-HP2-0700
RD-0700-575-3-60-A
M-MNS-0700
M-CNT-0850
M-PPR-1000
M-FCN-1000
M-TRF-1000
N/A
N/A
M-SLV-3000-24
M-MMV-1000
M-MMM-1000
N/A
M-CFR-0700
M-CLE-0700
M-CRI-0700
M-CRE-0700
M-CTO-0850
M-CBA-0850
M-FAS-1000
M-STU-1000
M-CPS-1000
N/A
M-CTC-1000
M-SCR-1000
M-NUT-1000
M-CBL-0150
M-FRT-0150
M-HP1-0850
M-HP2-0850
RD-0850-230-3-60-A
M-MNS-2000
M-CNT-0850
M-PPR-1000
M-FCN-1000
M-TRF-1000
N/A
N/A
M-SLV-3000-24
M-MMV-1000
M-MMM-1000
N/A
M-CFR-0850
M-CLE-0850
M-CRI-0850
M-CRE-0850
M-CTO-0850
M-CBA-0850
M-FAS-1000
M-STU-1000
M-CPS-1000
N/A
M-CTC-1000
M-SCR-1000
M-NUT-1000
M-CBL-0150
M-FRT-0150
M-HP1-0850
M-HP2-0850
RD-0850-400-3-50-A
M-MNS-2000
M-CNT-0850
M-PPR-1000
M-FCN-1000
M-TRF-1000
N/A
N/A
M-SLV-3000-24
M-MMV-1000
M-MMM-1000
N/A
M-CFR-0850
M-CLE-0850
M-CRI-0850
M-CRE-0850
M-CTO-0850
M-CBA-0850
M-FAS-1000
M-STU-1000
M-CPS-1000
N/A
M-CTC-1000
M-SCR-1000
M-NUT-1000
M-CBL-0150
M-FRT-0150
M-HP1-0850
M-HP2-0850
RD-0850-460-3-60-A
M-MNS-2000
M-CNT-0850
M-PPR-1000
M-FCN-1000
M-TRF-1000
N/A
N/A
M-SLV-3000-24
M-MMV-1000
M-MMM-1000
N/A
M-CFR-0850
M-CLE-0850
M-CRI-0850
M-CRE-0850
Component Name
Refrigerant Gas compressor compressor electric box
Condenser
Fan motor
Fan Blade fan grill
Drier-Dehydrator
Heat Exchanger
Evaporator (water Heat
Exchanger)
Flexible steel tube (inlet)
Flexible steel tube (outlet)
Expansion valve
By-pass valve separator
Liquid Receiver
High Pressure Security switch
Fan on/off switch
Low pressure switch
Thermostatic switch
Water pressure Switch
Water pressure switch timer
Water pump contactor
Water pump
Water Tank
Water Gauge
Microprosessor
Fan Overload Protector
Compressor Overload Protector
Thermostatic Gauge
On/off Button
RD-0850-575-3-60-A
R134a
M-CMP-1000-575-3-60-A
N/A
M-CON-0850
M-FMT-1200-575-3-60
N/A
N/A
M-DRI-1000
4 X M-EXC-200
N/A
N/A
N/A
M-EXV-0850
M-BYV-1000
M-SPR-1000
M-RCV-0850
M-HPS-1000
2 X M-FNS-0400
M-LPS-1000
N/A
N/A
N/A
N/A
N/A
N/A
N/A
M-MKP-1000
M-FOP-3000
M-COP-1000-575-3-60-A
N/A
N/A
RD-1000-400-3-50-A
R134a
M-CMP-1000-460-3-60-A
N/A
M-CON-1000
M-FMT-1200-400-3-50
N/A
N/A
M-DRI-1000
M-EXC-1000
N/A
N/A
N/A
M-EXV-1000
M-BYV-1000
M-SPR-1000
M-RCV-1000
M-HPS-1000
2 X M-FNS-0400
M-LPS-1000
N/A
N/A
N/A
N/A
N/A
N/A
N/A
M-MKP-1000
M-FOP-3000
M-COP-1000-460-3-60-A
N/A
N/A
RD-1000-460-3-60-A
R134a
M-CMP-1000-460-3-60-A
N/A
M-CON-1000
M-FMT-1200-460-3-60
N/A
N/A
M-DRI-1000
M-EXC-1000
N/A
N/A
N/A
M-EXV-1000
M-BYV-1000
M-SPR-1000
M-RCV-1000
M-HPS-1000
2 X M-FNS-0400
M-LPS-1000
N/A
N/A
N/A
N/A
N/A
N/A
N/A
M-MKP-1000
M-FOP-3000
M-COP-1000-460-3-60-A
N/A
N/A
RD-1000-575-3-60-A
R134a
M-CMP-1000-575-3-60-A
N/A
M-CON-1000
M-FMT-1200-575-3-60
N/A
N/A
M-DRI-1000
M-EXC-1000
N/A
N/A
N/A
M-EXV-1000
M-BYV-1000
M-SPR-1000
M-RCV-1000
M-HPS-1000
2 X M-FNS-0400
M-LPS-1000
N/A
N/A
N/A
N/A
N/A
N/A
N/A
M-MKP-1000
M-FOP-3000
M-COP-1000-460-3-60-A
N/A
N/A
Component Name
Main Switch
Contactor
Phase protection relay
Fan Contactor
Transformer
Secondary contact
Timer
Solenoid Valve
Membrane valve
Membrane
Water Separator
Cabinet Front
Cabinet Side - Left
Cabinet Side - Right
Cabinet Rear
Cabinet Top
Cabinet Base
Cabinette fastener
Cabinette Stud and Nut
Cabinet handle
Plastic Display cover
Cabinet Top Corners
Screws
Cage Nuts
Cabinet Legs
Cabinet Frame Top
Cabinette Horizontal profile 1
Cabinette Horizontal profile 2
M-CTO-0850
M-CBA-0850
M-FAS-1000
M-STU-1000
M-CPS-1000
N/A
M-CTC-1000
M-SCR-1000
M-NUT-1000
M-CBL-0150
M-FRT-0150
M-HP1-0850
M-HP2-0850
RD-0850-575-3-60-A
M-MNS-2000
M-CNT-0850
M-PPR-1000
M-FCN-1000
M-TRF-1000
N/A
N/A
M-SLV-3000-24
M-MMV-1000
M-MMM-1000
N/A
M-CFR-0850
M-CLE-0850
M-CRI-0850
M-CRE-0850
M-CTO-1000
M-CBA-1000
M-FAS-1000
M-STU-1000
M-CPS-1000
N/A
M-CTC-1000
M-SCR-1000
M-NUT-1000
M-CBL-0150
M-FRT-0150
M-HP1-1000
M-HP2-1000
RD-1000-400-3-50-A
M-MNS-2000
M-CNT-1000
M-PPR-1000
M-FCN-1000
M-TRF-1000
N/A
N/A
M-SLV-3000-24
M-MMV-1000
M-MMM-1000
N/A
M-CFR-1000
M-CLE-1000
M-CRI-1000
M-CRE-1000
M-CTO-1000
M-CBA-1000
M-FAS-1000
M-STU-1000
M-CPS-1000
N/A
M-CTC-1000
M-SCR-1000
M-NUT-1000
M-CBL-0150
M-FRT-0150
M-HP1-1000
M-HP2-1000
RD-1000-460-3-60-A
M-MNS-2000
M-CNT-1000
M-PPR-1000
M-FCN-1000
M-TRF-1000
N/A
N/A
M-SLV-3000-24
M-MMV-1000
M-MMM-1000
N/A
M-CFR-1000
M-CLE-1000
M-CRI-1000
M-CRE-1000
M-CTO-1000
M-CBA-1000
M-FAS-1000
M-STU-1000
M-CPS-1000
N/A
M-CTC-1000
M-SCR-1000
M-NUT-1000
M-CBL-0150
M-FRT-0150
M-HP1-1000
M-HP2-1000
RD-1000-575-3-60-A
M-MNS-2000
M-CNT-1000
M-PPR-1000
M-FCN-1000
M-TRF-1000
N/A
N/A
M-SLV-3000-24
M-MMV-1000
M-MMM-1000
N/A
M-CFR-1000
M-CLE-1000
M-CRI-1000
M-CRE-1000
NOTES
266
NOTES
267
3700 East Michigan Boulevard • Michigan City, Indiana, 46360 U.S.A.
Telephone: 1-219-879-5451
Printed in the U.S.A.
Specifications subject to change without prior notice.
E11EP
The public link to your chat has been updated. You may view and manage your chat links after registration here.
Advertisement
Delivers incredibly low moisture content.
Handles high ambient temperatures.
Ensures clean, dry air for critical processes.
Reduces maintenance costs and downtime.
Improves productivity and efficiency.
To remove moisture from compressed air, particularly in high-temperature environments.
Reduced moisture content, improved air quality, reduced maintenance costs, and increased productivity.
It is ideal for applications requiring clean, dry air, especially in high-temperature environments.
How are the dryer covers removed?
The viewed document does not provide specific instructions on how to remove the covers of the dryer. However, it explicitly states in the safety sections that safety devices, protecting covers, or insulations in the dryer are never to be removed or modified.
Login to continue
