Yealink YHS33 User Manual

c

Components

1.

T-Bar

2.

Adjustable Headband

3.

Adjustment Rod

4.

Receiver

Connection

Figure

5.

Boom

6.

Microphone with sponge cover

7.

Headset Cable

8.

Clothing Clip

9.

Quick Disconnector

10.

RJ9 Modular Connector

Description

The headset is equipped with a quick disconnector. Users can connect the headset to a special adapter to connect to your IP phone.

The headset is fitted with a standard modular connector.

To use the headset mode, simply insert the modular connector into the headset port of a compatible telephone.

To adjust the headband, lengthen or shorten the adjustment rod until it fits comfortably. Position the headset receiver that the ear cushion sit comfortably over the center of your ears.

Position the T-bar above your ear.

Hold the receiver securely against your ear with one hand. With the other hand, adjust the boom to ensure that the microphone sits about one finger-width from your mouth.

The clothing clip helps to keep the headset properly positioned and be free from the cord's weight. Attach the clothing clip at a comfortable level to liberate your hand.

Usage

The Yealink YHS33 is compatible with all of the Yealink IP phones. We will take Yealink SIP-T46G IP phone as an example to make a brief description.

1.

When an incoming call arrives to your extension, press the HEADSET key to answer it by the headset mode.

2.

During a conversion, press the HEADSET key or pick up the handset, the conversion will switch between the headset mode and the handset mode.

Safety Instructions

Read these safety instructions before use! The following basic safety precautions should always be followed to reduce the risk of fire, electrical shock, and other personal injury.















Only use Yealink accessories designed for this product.

Never allow children to play with the product—small parts may be a choking hazard; cords may cause strangulation.

Do not insert anything into the product because this may cause damage to the internal components or cause injury to you.

Avoid contact with liquids.

Discontinue use and contact Yealink if the product overheats, has been damaged or has a damaged cord or plug.

If you experience a skin irritation after using this product, discontinue use and contact Yealink.

Exposure to high volume sound levels may damage your hearing. To protect your hearing, Yealink suggests that you:

1.

Set the volume control in a low position before putting the headset on your ears.

2.

Limit the amount of time you use headsets at high volume.

3.

Avoid turning up the volume to block out noisy surroundings.

4.

Turn the volume down if the sound from the headset prevents you from hearing people speaking near you.

Yealink(Xiamen) Network Technology Co.,Ltd.

309, 3rd Floor, No.16, Yun Ding North Road, Huli District, Xiamen City, Fujian, P.R.C

YEALINK(EUROPE) NETWORK TECHNOLOGY B.V.

Address: WTC Schiphol Airport, B tower, 5th floor, Schiphol Boulevard 231, 1118 BH Amsterdam Schiphol, the Netherlands

YEALINK(USA) NETWORK TECHNOLOGY CO., LTD.

Address: 999 Peachtree Street Suite 2300, Fulton, Atlanta, GA, 30309, USA

Copyright © 2018 YEALINK(XIAMEN) NETWORK TECHNOLOGY CO.,LTD. All rights reserved.

www.yealink.com