advertisement
26” (66cm) HD LED LCD TV with Built-in DVD Player
/ GVA26LEDC
Instruction Manual
Contents
Important safety instructions
Usage conditions and restrictions
Electrical safety, power cord and plug
Position
Cleaning and maintenance
Accessories
Connections and functions
Remote control
Wall mounting instructions
Basic installation
First time installation
Installing The Batteries
Using the Remote Control
Selecting an Input Source
Operating The Menu
Channel Menu
Auto Tuning
ATV Manual Tuning
DTV Manual Tuning
Program Edit
Operating The Menu (DTV)
Picture menu
Sound menu
Time menu
Lock menu
Setup menu
Operating The Menu (ATV)
Component / HDMI / AV
Media (Multimedia) Menu
Photo menu
13
16
17
17
18
9
12
7
8
19
19
19
20
21
21
22
26
28
29
30
30
22
23
24
25
5
5
4
4
5
Contents
Music menu
Movie menu
USB Multimedia Playback Format
PVR (Personal Video Recorder)
EPG (Electronic Program Guide)
DVD Function
System setup
Audio setup
Preferenace page
Specifications
FAQs
40
41
42
34
37
38
31
32
33
38
39
Important Safety Instructions
Read this manual thoroughly before first use and keep it in a safe place for future reference, along with the warranty card, purchase receipt and carton. The safety precautions enclosed herein reduce the risk of fire, electric shock and injury when correctly adhered to.
Usage conditions and restrictions
To prevent any injuries, the following safety precautions should be observed in the installation, use, servicing and maintenance of equipment. Before operating this equipment, please read this manual completely, and keep it nearby for future reference.
• Take notice of all the warnings.
• Do not use this TV near water.
• Clean only with a dry cloth.
• Do not block any of the ventilation openings.
• Install in accordance with the manufacturer’s instructions.
• Do not install near any heat sources such as radiators, heat registers, stoves, or other TV’s
(including amplifiers) that produce heat.
• Do not alter the grounding type plug provided with the TV. A grounding type plug has two blades and a third grounding prong. The third prong is provided for your safety. When the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
• Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the TV.
• Only use the attachments/accessories specified by the manufacturer.
• Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the TV.
• Unplug this TV during lightning storms or when unused for long periods of time.
• The appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
• Young children should be supervised to ensure they do not play with the appliance.
• Refer all servicing to qualified service personnel. Servicing is required when the TV has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the TV, the TV has been exposed to rain or moisture, does not operate normally, or has been dropped.
NOTE: The TV must not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the TV.
4
Important Safety Instructions
Electrical safety, power cord and plug
• Before installing this TV set, make sure your outlet voltage corresponds to the voltage stated on the appliance rating label.
• To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.
• Do not overload the power cord or power outlet.
• Do not let the cord hang over the edge of a table or counter, or touch any hot surface.
• Do not allow anything to rest on or roll over the power cord and signal cable.
• Protect the power cord and signal cable from being trampled.
• Do not expose the power cord and signal cable to moisture.
5
Position
• If a television is not positioned in a sufficiently stable location, it can be potentially hazardous due to falling. Many injuries, particularly to children, can be avoided by taking simple precautions such as:
• Securely attaching the TV to the wall mount fastened on the wall.
• Only using furniture that can safely support the television.
• Ensuring the television is not overhanging the edge of the supporting furniture.
• Educating children about the dangers of climbing on furniture to reach the TV controls.
• Not standing the TV on cloth or other materials placed between the television and supporting furniture.
• Not placing the television on tall furniture (for example, cupboards or bookcases) without anchoring both the furniture and the television to a suitable support.
• When deciding on where to put the TV set, make sure the place is:
• Well ventilated.
• Away from damp and cold.
• Protected from overheating and away from direct sunlight.
• Away from moisture drips or splashes.
• Protected from excessive dust.
• Do not install this equipment in a confined space such as a bookcase or similar unit.
• Do not put any objects filled with liquids, such as vases, on top of the TV set.
• Do not place any naked flame sources, such as lighted candles, on top of the TV set.
Cleaning and maintenance
• Dust the TV set by wiping the screen and cabinet with a soft, clean cloth.
• Do not apply excessive force to the screen when cleaning.
• Do not clean the screen with water or chemical cleaners as this may damage the LCD screen surface.
Important Safety Instructions
• Do not dismantle this product by yourself, as this may cause damage. There are no user- serviceable parts contained in the TV set.
• If your TV set has been damaged, contact the after sales support line for advice or take it to a local service centre or for inspection or repair. No liability can be accepted for any damage caused by non-compliance with these instructions or any other improper use or mishandling of appliance.
• Do not apply excessive force to the screen when cleaning.
• Do not clean the screen with water or chemical cleaners as this may damage the LCD screen surface.
6
CAUTION:
TO PREVENT THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL
This symbol indicates that dangerous voltage constituting a risk of electric shock is present within this unit.
This symbol indicates that there are important operating and maintenance instructions in the documentation accompanying this unit.
TV with Class 1 construction shall be connected to a main socket outlet with a protective earthing connection.
WARNING:
TO PREVENT DAMAGE WHICH MAY RESULT IN FIRE OR AN ELECTRIC SHOCK HAZARD, DO
NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
CAUTIONS: • To reduce the risk of electric shock, do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so.
• Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Accessories
The configuration of the components may look different from the following illustration.
7
Connections and functions
Front View
1. Press “STANDBY” button to turn standby mode on or off.
2. Press “SOURCE” to select the input source.
3. Press “MENU” to bring up the main menu on the screen.
4. Press “CH+” or “CH-” to scan through channels.
5. Press ‘VOL+” or “VOL-” to increase or decrease the volume.
Back View & Conrol Connection
6. POWER INDICATOR: Shows red in standby mode, shows blue when your TV is switched on.
7. REMOTE SENSOR: Infrared sensor for the remote control
12
11
10
9
8
7
DC IN
1. DC power input
2. USB: Connect to portable USB storage device
3. HDMI: Connect the HDMI output jack of DVD
4. YPbPr(Component) output jack of DVD
5. PC AUDIO: Connect the Audio output jack of PC
6. VGA: Connect the PC-RGB output jack of PC
7. Coax: Connect the SPDIF receiver
8. HEADPHONE: Connect the earphone
9. VIDEO: Connect the VIDEO output jack of DVD
10/11. R / L: Connect the R/L audio output jack of DVD
12. RF: Connect the antenna
8
Remote Control
DTV MODE
OK
NUMBER BUTTONS: Press 0-9 to select a channel.
MENU: Brings up the main menu to the screen.
DISPLAY: Press to display the source and channel’s information.
/ / / /OK ENTER : Allows you to move, select and setup the OSD options.
CH+/-: Channel up/down.
COLOUR BUTTONS: Used in a few sub menus.
SUBTITLE: Displays subtitles.
SIZE: Change the picture format.
FAV+/FAV/FAV-: Press to increase/decrease your favourite program in DTV mode.
MEDIA: Press to select MEDIA mode.
REC: PVR/Record the program in DTV mode.
TIMESHIFT: Press to select the TIMESHIFT function.
TV/RADIO: Select TV or RADIO modes.
: PLAY/PAUSE in TIMESHIFT and MEDIA mode.
: Jump to previous and next track in
MEDIA mode.
: Fast reverse and forward key in MEDIA mode.
: Stop in MEDIA mode or exit the REC or TIMESHIFT mode.
9
ATV MODE
OK
10
STANDBY: Press to turn the TV set on or off.
SOURCE: Press to cycle through the input source.
MUTE: Press to mute the sound. Press again or press V+ to un-mute the TV.
PMODE: Select picture mode.
SMODE: Select sound mode.
I/II: Press to search the NICAM modes. (not available in
Australia)
SLEEP: Sets the TV sleep time.
0-9 : TV channel number select.
: Multiple number program channels.
: Return to the previous channel viewed.
DISPLAY: Press to display the source and channel’s information.
/ / / /OK ENTER : Allows you to move, select and setup the OSD options.
MENU: Brings up the main menu to the screen.
EXIT: Press to close the on-screen display.
VOL+/: Volume up/down.
CH+/-: Channel up/down.
Remote Control
TELETEXT MODE*
OK
NUMBER BUTTONS: Press 0-9 to select a teletext page.
TEXT: Press to switch between TV and Teletext mode.
COLOUR BUTTONS: Select 4 preferred teletext pages.
SUBTITLE: Displays subtitles.
HOLD: Freeze the current page.
SIZE: Change the picture size.
REVEAL: Reveal or hide the hidden words.
CANCEL: Teletext cancel.
INDEX : Request index page when index is valid.
MIX: TV and TXT pictures are mixed together in transparent background.
SUBPAGE: TELETEXT subpage.
* Teletext or Austext is no longer available, nor is there any plan for a replacement teletext service in Australia. For more information, please visit the websites of the Australian channel providers.
However, one teletext option, “closed captions”, is still working on most Australian television channels.
This service allows you to activate subtitles while watching normal television programs that provide it.
11
12
Wall Mounting Instructions
Mounting Specification
200mm
200mm
Mounting specification:
200mm x 200mm using screw size M4 (not supplied), length of screw should not exceed
14mm.
Please note: the 14mm length of screw refers to how deep the screw can go inside the mounting holes. When you are buying screws, you should add the original 14mm to the thickness of your mounting plate in order to
Mounting specification:200mm x 200mm using screw size M4(not supplied).length of screw should not exceed 14mm.
To attach the stand
get the total screw length.
Please note: the 14mm length of screw refers to how deep the screw can go inside the mounting
To attach the stand, place the stand on the neck of the TV, insert and tighten the screws in the circled area.
consult a qualified installer for further instructions on bracket support and wall support.
34
To remove the stand
To remove the stand, remove the screws in the circled area and the neck will come off.
The screws in the package are for securing the TV stand only. If you are mounting the
TV please consult a qualified installer for further instructions on bracket support and wall support.
200mm
200mm
Mounting specification:200mm x 200mm using screw size M4(not supplied).length of screw should not exceed 14mm.
Please note: the 14mm length of screw refers to how deep the screw can go inside the mounting holes. when you are buying screws,you should add the original 14mm to the thickness of your mounting plate in order to get the total screw length.
The screws in the package are for securing the TV stand only.if you are mounting the TV please consult a qualified installer for further instructions on bracket support and wall support.
34
Basic Installation
Antenna Connection
To ensure good picture and sound, a TV antenna system needs to be connected. The antenna system as shown can be sourced from TV equipment stores, which will provide service for the correct installation and connection. After installation, insert the 75-OHM antenna plug into the antenna jack (RF) as shown.
13
TV
AV Connection
Connect the VIDEO and AUDIO output jack of the DVD or VCR to the AV IN jacks in the set using an AV Cable (Yellow [video], White and Red [left & right audio]). Select the AV input source using the SOURCE button on the remote control.
AV Cable
14
Component (YPbPr) Connection
Connect the YPbPr output of the DVD or VCR to the YPbPr input on the set. The picture quality is improved compared to connecting a regular VCR to the AV input. Connect the
Audio output of the DVD or VCR to the Audio input jacks on the set using the RCA cable.
Match the jack colours: Y is green, Pb is blue, Pr is red, Audio left is white and Audio right is red, Select Component input source using the SOURCE button on the remote control.
VGA (PC) Connection
Connect the VGA output of the PC to the VGA jack on the set. Connect the AUDIO output of the PC to the PC AUDIO jack on the set. Select the PC input source using the
SOURCE button on the remote control.
HDMI Connection
HDMI is a digital connection for sending both Video & Sound signals through the one cable. HDMI supports 1080p Video and Multi-channel Digital Audio. Connect HDMI out of DVD or VCR to HDMI 1, 2 or 3. Select HDMI 1, HDMI 2 or HDMI 3 input source using the SOURCE button on the remote control
15
MEDIA (USB) Connection
Connect portable USB storage device for use with PVR function. Select USB input source using the SOURCE or MEDIA buttons on the remote control.
Power Cord Connection
- Connect the power cord and AC adaptor correctly as shown.
- Press the STANDBY switch of your TV to switch the unit on. The power indicator on the front panel lights up in blue.
Adaptor
First Time Installation
When you switch on the TV for the first time, the First Time Installation menu will be displayed on the screen.
Please select an OSD Language
16
English Espanol Francais
Potuguese Italiano
- Use the buttons to select the country (Australia), if you select other than
Australia the unit will not operate correctly for Australian TV signals. and then use the
ENTER button to go to the next page.
Please select Country
Other
Australia
- Use the buttons to select the language and then use ENTER button to start searching for all the ATV/DTV programs in your area. This may take a few minutes.
- When auto searching is complete, your TV will show the first channel found.
Installing the batteries
1. Open the cover at the back of the remote control unit completely.
2. Insert two 1.5V AAA batteries, ensuring the polarities (+ / -) of the batteries are correctly aligned and the batteries are properly pushed into place so they can power the remote control unit.
3. Replae the battery cover.
17
Precautions when using batteries
• Do not use old and new batteries together.
• Do not use different types of battery (for example, Manganese and Alkaline batteries) together.
• Note that there are chargeable and non-chargeable batteries. Do not attempt to charge non-chargeable batteries.
• Remove the batteries from the remote control unit if you do not intend to use the unit for a long time.
• When disposing used batteries, follow any guidelines for recycling and disposal of batteries that apply in your local area.
Using the remote control
The remote control should be operated within 20 feet (5m) and 30° to the left or the right of the IR receiver at the front of the LCD TV.
Selecting an Input Source
You can select an input signal source by pressing the SOURCE button on the your remote control or control panel of your TV. The on screen display menu shows the diagram below on the your screen, and you can either press the SOURCE button on the control panel or the arrows buttons on your remote control to choose an input signal source.
18
You can choose from the following input sources if you have your audio and video devices connected to your TV.
When you switch on this TV for the first time, you need to select the language and the country to auto search for all the DTV programs in your area.
OK
• Press SOURCE button to display the input source list.
• Press button to select the input source you want to watch
• Press OK / button to enter the input source.
• Press EXIT button to quit.
On Screen Display when you change the volume
1. When you press the VOL+ to increase the volume and VOL- to reduce the volume, the diagram below shows on your screen for 15 seconds.
2. The MUTE symbol will show on one of your screen corners when you press the MUTE button, press the MUTE button again and the symbol will disappear.
3. You can put the sound on again either by pressing the MUTE button or the VOL+ button. The diagram below shows you the sound level in the volume indicator.
Operating the Menus
1. Press the MENU button on the remote control, the on-screen menu will appear on the screen.
2. Use the left and right navigation keys to select your main option.
The main menu items, from left to right, are:
19
Channel Picture Sound Time Lock Setup
Channel menu
OK
1. Press button to select the option that you want to adjust in the CHANNEL menu.
2. Press ENTER button to adjust.
3. After finishing your adjustment, press MENU button to save and return back to the previous menu.
Auto Tuning
Press button to select Auto Tuning , then press ENTER button to start auto search,
ATV Manual Tuning
Press button to select ATV Manual Tuning, then press OK button.
1.
2.
3.
BG
20
Press
Press
button to select channel number you want to store.
button to select the third option. Press button to select audio system.
Press button to select search, then press OK button to start tuning.
Press OK button on your remote control to save the settings and menu button to go back to the previous menu.
DTV Manual Tuning
Press button to select DTV Manual Tuning , then press OK button.
21
Press button to select channel, then press OK button to search program.
Program Edit
Press button to select Program Edit , then press OK button to enter sub menu.
This option has 5 functions in ATV mode and 3 options in DTV mode.
1. Use Red button to delete the current channel.
2. Use Green button to rename the current channel. (ATV mode)
3. Use Yellow button and the arrow button to move the current channel. (ATV mode)
4. Use Blue button to skip the current channel.
5. Use FAV button to set the current channel to your favourite channel. If the channel is already one of your favourite channel, pressing FAV button again will set it back to a normal channel.
Signal Information (DTV mode only)
Press button to select Signal Information, then press OK button to display signal details including Channel, Quality and Strength.
Operating the Menu (DTV)
Picture menu
Press MENU button to display the main menu.
Press button to select PICTURE in the main menu.
22
OK
1. Press button to select the option that you want to adjust in the PICTURE menu.
2. Press OK button to adjust.
3. After finishing your adjustment, press MENU button to save and return back to the previous menu.
Picture mode
Press button to select Picture Mode , then press OK button to enter sub menu. Press button to select (Available Picture mode: Personal, Dynamic, Standard, Mild).
You can change the value of contrast, brightness, colour and sharpness when the picture is in
PERSONAL mode. TIPS: You can press PMODE button on the remote control to change the
Picture Mode directly.
Contrast: Press button to select Contrast, then press OK button to enter sub menu. Press
button to adjust. Press OK to save.
Brightness: Press button Brightness , then press OK button to enter sub menu. Press
Colour: Press button to adjust. Press OK to save.
button to select Colour , then press OK button to enter sub menu. Press
button to adjust. Press OK to save.
Tint: Press button to select Tint , then press OK button to enter sub menu. Press button to adjust. (Not available in DTV) Press OK to save.
Sharpness: Press to save.
button to select Sharpness , then press button to adjust. Press OK
Colour Temp: Press button to select Colour Temperature , then press OK button to enter sub menu. Press button to adjust. (Normal, Cold, Warm)
Noise Reduction: Press button to select Noise Reduction , then press OK button to enter sub menu. Press button to adjust.
(Off, Low, Middle, High, Default)
23
Sound menu
Press MENU button to display the main menu.
Press button to select SOUND in the main menu.
OK
1. Press button to select the option that you want to adjust in the SOUND menu.
2. Press button to adjust.
3. After finishing your adjustment, press MENU button to save and return back to the previous menu.
Picture mode
Press button to select Sound Mode , then press OK button to enter sub menu. Press button to select (Available Sound mode: Standard, Music, Movie, Sports, Personal).
You can change the value of treble and bass when the sound is in PERSONAL mode. TIPS: You can press SMODE button on the remote control to change the Sound Mode directly.
Treble: Press button to select Treble, then press OK button to enter sub menu. Press button to adjust. Press OK to save.
Bass: Press button Bass , then press OK button to enter sub menu. Press button to adjust. Press OK to save.
Balance: Press button to select Balance , then press OK button to enter sub menu. Press
Auto Volume:
button to adjust. Press OK to save.
Press or Off.
button to select Auto Volume , then press OK button to select On
AD Switch: Press
Press press
button to select AD Switch , then press OK button to enter sub-menu.
button to turn On or Off. Press button to select AD Volume, then
buttons to adjust. Press MENU button to save.
24
Time menu
Press MENU button to display the main menu.
Press button to select TIME in the main menu.
Time Zone NSW/ACT
OK
1. Press button to select the option that you want to adjust in the TIME menu.
2. Press button to adjust.
3. After finishing your adjustment, press MENU button to save and return back to the previous menu.
Clock
Use the / keys to select Clock, then use the / keys to set the time.
NOTE: You cannot change the time manually in DTV mode, as the time comes directly from a signal source.
Time Zone
Press button to select Time Zone , then press OK button to enter sub menu. press / button to select time zone. Press OK to save.
.
Sleep Timer
You can select to have the sleep timer off, or set it to switch off the TV automatically after 10,
20, 30, 60, 90, 120, 180 or 240 minutes.
Auto Standby
When the auto standby function is set, the TV will change to standby mode automatically after the time you have select.
OSD Timer
Use the / keys to select this option, then set your preferred duration for on-screen display messages. Choose between 5, 10, 15, 20, 25 or 30 seconds.
Lock menu
Press MENU button to display the main menu.
Press button to select LOCK in the main menu.
OK
Lock System
Press button to select Lock System , then press OK button and enter password to make the following 3 options valid. (Default password is ‘ 0000’)
Set Password
Press button to select Key Lock , then press OK button to enter sub menu to select
(Available options are: ON, OFF)
Block Program
Press button to select Set Password , then press OK button. Enter existing password, enter new password, then enter new password a second time.
Parental Guidance
Choose from the following Parental Control levels: Block R and Above, Block AV and Above,
Block MA and Above, Block M and Above, Block PG and Above, Block G and Above, Block
ALL and No Block.
Key Lock
Press button to select Key Lock , then press OK button to enter sub menu to select
(Available options are: ON, OFF)
25
Setup menu
Press MENU button to display the main menu.
Press button to select SETUP in the main menu.
OK
1. Press button to select the option that you want to adjust in the OPTION menu.
2. Press button to adjust.
3. After finishing your adjustment, press MENU button to save and return back to the previous menu.
OSD Language
Press button to select OSD Language , then press OK button to enter sub menu. Press
button to select OSD Language, default setting is English.
Teletext Language
Press button to select TT Language , then press ENTER button to enter sub menu. Press
button to select TT Language. (Teletext is no longer available in Australia)
Hearing Impaired
Press button to select Hearing impaired , then press OK button to select ON/OFF.
PVR File System
Press button to select PVR File System , then press OK button to enter sub menu. (See page 35)
Aspect Ratio
Press button to select Aspect Ratio , then press OK button to enter sub menu. Press
button to select aspect ratio (Auto, 4:3, 16:9
Zoom1, Zoom2).
26
27
Blue Screen
Press / keys to select Blue Screen , then press OK button to select ON/OFF. Displays a blue screen when there is no signal on the current source mode.
First Time Installation
Use the / keys to select this option select First Time Installation, then press OK key to set relevant options including OSD language, country and tuning. (See page 12)
Restore
Use the / keys to select this option to restore factory default settings. You will need to enter the password.
NOTE: All your picture, sound, time and option settings will be lost when restoring factory defaults.
Software Update(USB)
(If a software update is required, this option is used to applied the new version to the TV)
Use the / keys to select this option, then press OK key to update software using USB.
Operating the Menu (ATV)
Channel menu
Press MENU button to display the main menu.
Press button to select CHANNEL in the main menu.
28
OK
1. Press button to select the option that you want to adjust in the CHANNEL menu.
2. Press button to adjust.
3. After finishing your adjustment, press MENU button to save and return back to the previous menu.
Auto Tuning
Press button to select Auto Tuning , then press OK button to start auto search.
ATV Manual Tuning
Press button to select Manual Tuning , then press OK button to input password to enter sub menu. (Default password is ‘0000’)
DTV Manual Tuning
Press button to select Manual Tuning , then press OK button to input password to enter sub menu. (Default password is ‘0000’)
Program Edit
Press button to select Program Edit , then press OK button to enter sub menu.
NOTES:
• PICTURE menu and description are the same as that for DTV mode.
• SOUND menu and description are the same as that for DTV mode.
• LOCK menu and description are the same as that for DTV mode.
• TIME menu has no clock option.
• HEARING IMPAIRED and PVR FILE SYSTEM in OPTION menu are invalid.
Component / HDMI / AV menu
Component / HDMI / AV menu
NOTES:
• PICTURE menu and description are the same as that for DTV mode.
• SOUND menu and description are the same as that for DTV mode.
• LOCK menu and description are the same as that for DTV mode.
• AV/HDMI/Component mode has no CHANNEL menu.
• TIME menu has no clock option.
• HEARING IMPAIRED and PVR FILE SYSTEM in OPTION menu are invalid.
29
30
Media (Multimedia) Menu
NOTE: Before operating Media menu, plug in a USB storage device, then press SOURCE button to set the input source to MEDIA.
Press button to select MEDIA in the Source menu, then press OK button to enter.
Press button to select the option you want to adjust in the Media menu, then press
OK button to enter.
Photo menu
Press button to select PHOTO in the main menu, then press OK button to enter.
Press EXIT button at any point to return back to the previous menu.
Press button to select drive disk you want to watch, then press OK button to enter.
31
Press button to select the file you want to watch in the file selecting menu, then press media button to display picture.
When highlighting the option you select, the file information will appear on the right and picture will be previewed in the center.
Press button to select the file folder you want to search in the file selecting menu, then press res of enter button on your remote control to enter sub menu.
Press button to select the file to delete in the file selecting menu, then press red button on your remote control and press OK button to delete files.
Music menu
Press button to select MUSIC in the main menu, then press OK button to enter.
Press MENU button to return back to the previous menu and EXIT menu to quit.
Press
Press
button to select drive disk you want to watch, then press OK button to enter.
button to select return option to go back to the previous menu.
When highlighting the option you select, the file information will appear on the right and music will be previewed in the center.
Press button to select the file you want to watch in the file select in menu, then press
OK button to add the file to playlist, press media button to display and operate file details.
Press button to select menu in the bottom you want to run, then press OK button to operate. Press menu button to go back to the previous menu and exit the button to quit the entire menu. Press button to hide the menu in the bottom.
Movie menu
Press button to select MOVIE in the main menu, then press OK button to enter.
Press MENU button to return back to the previous menu and EXIT menu to quit.
32
Press
Press
button to select drive disk you want to watch, then press OK button to enter.
button to select return option to go back to the previous menu.
When highlighting the option you select, the file information will appear on the right and music will be previewed in the center.
Press media button to play the selected movie.
Press display button to select menu in the bottom you want to run, then press OK button to operate.
Press MENU button to go back to the previous menu and EXIT button to quit the entire menu.
USB Multimedia Playback Format
33
34
PVR (Personal Video Recorder)
This TV features a PVR recording and playback function which lets you:
• Instantly record a TV program (via the one-touch recording button on your remote control),
• Time-shift playback of a TV program, and
• Set a timer to record future television programs (via the EPG).
NOTE: For any type of recording with this television, you must have plugged in a USB storage device into the appropriate USB port.
PVR File System
In DTV mode, enter the SETUP menu, then select PVR File system.
Select Disk
Choose the disk for storing the content you want to record.
Check PVR File System
Select “Check PVR File System” and press OK to check your USB device.
35
USB Disk
If no USB device is connected, a notice will advise you accordingly.
Format
If your USB device is recognised, you can select Format.
Press OK to start Format (File System Size). (FAT32)
NOTE: If you select Format all data will be deleted.
Press the keys to select PVR File System Type, then press OK to format the USB storage device (default: “FAT32”). The Format Disk screen below appears
After formatting, the system will establish a PVR file system according to the previous confirmed PVR File System size.
Speed
After Check PVR File System, it shows the USB available speed and indicates if it will support recording HD or SD signals.
Record Start/Stop
When in DTV mode you can press the REC button to start (and the button to stop) recording directly.
If you want to stop recording, you should select the Stop Icon in the PVR operation menu shown below, then press OK button to confirm.
36
The icon will be appear when you start to record.
Time Shift Recording
When you are recording, you can press the play button and watch the program while still recording. To stop, press the STOP button. This can be used when you have been interrupted while watching your favorite program.
Note: 1. You should stop recording when you want to change the channel.
2. You should stop recording when you want to power off the TV.
Recorded List
Display the list of recorded programs by pressing the INDEX button when in DTV mode.
Play
Press OK to play the selected program, or press to play the recorded program directly. The icon will appear when you start playback.
Delete
Press the RED button to delete the selected program.
Info
Press the INFO button to bring up or close program information
EPG (Electronic Program Guide)
EPG stands for Digital Electronic Program Guide. It is supplied by the program providers and offers information about the programs to be broadcast. You can access it in digital mode by pressing the EPG button on the remote control, the menu will appear on the screen, as below:
37
NOTE: When the TV is first turned on (in DTV mode), no EPG information is displayed. If still no EPG information is displayed after you have brought up the EPG menu, use the and left/right buttons to navigate to the channel you wish to display the information from and when it is highlighted, press OK on the remote control to activate it. Once you have activated a channel, use the buttons to go to the top row (Channel), then use the button left/ right to bring up the programs to be broadcast and the / buttons to move up and down the different timeslots.
PVR/Record
To record a selected program, press the RED button and insert an appropriate USB device.
Display
Press the GREEN button to display the information about the DTV program.
Schedule
Press the YELLOW button to bring up a schedule of programmed recordings.
Remind
Press the BLUE button and use the / buttons to navigate between programs.
Next Day/Prev Day
Press key to select the information about next day/previous day.
DVD Function
System setup page
- Press the DVD SETUP key and then press to display the general setup page when in
DVD mode.
- Press the key to move the highlight to select following option.
- Press the OK key to go into the following menu and then press the key to select a menu item.
- Press the OK key to confirm
38
Audio Setup Page
- Press the DVD SETUP key and then press to display the audio setup page when in
DVD mode.
- Press the key to move the highlight to select following option.
- Press the OK key to go into the following menu and then press the key to select a menu item.
- Press the OK key to confirm
39
Preference Page
- Press the DVD SETUP key and then press to display the preference page when in
DVD mode.
- Press the key to move the highlight to select following option.
- Press the OK key to go into the following menu and then press the key to select a menu item.
- Press the OK key to confirm
40
Specifications
MODEL
Panel System
Display Resolution
Television System
Inputs/Outputs
HDMI input
PC
GVA26LEDC
66cm (26”) HD LED panel with Built-in DVD Player
1366×768
PAL/NTSC
2
640x480/60Hz 800x600/60Hz 1024x768/60Hz
1366x768/60Hz
Audio (AV/PC)
Audio
Video
Audio L/R
R/L 200mVrms (max3.0vp-p) 20K RCA
R/L 200mVrms (max3.0vp-p) 20K
Video 1.0 Vp-p 75
R/L 200mVmrs (max3.0Vp-p) 20K
Speaker consumption L/R 2x3W
Voltage DC 12V 4.16A
Power consumption Max: 60W
41
FAQs
Problem Solution
No picture, no sound
No colour
1. Check if the house fuse or circuit breaker is working by checking that all the fuse inside your main fuse box are ON or test the wall outlet is working by trying with another electrical product e.g. a desk lamp.
2. Make sure your wall socket is switched on and is working properly (to check this, plug another electrical device into the outlet).
3. Make sure the plug is securely inserted into the outlet.
4. Make sure all connections are secure.
1. Change the colour system.
2. Adjust the saturation.
3. Try another channel.
4. Check if the program is broadcast in black-and-white.
Remote control does not work
1. Change the batteries.
2. Check that the batteries are installed correctly.
3. Ensure the TV is connected to the mains power.
No picture, normal sound 1. Adjust the brightness and contrast.
2. Broadcasting may be interrupted.
Normal picture, no sound 1. Press the Volume + button to increase the volume.
2. Press MUTE to restore sound if the volume is set to mute.
3. Change the sound system.
4. Broadcasting may be interrupted.
Pixelation in the picture This is usually caused by local interference from things such as cars, fluorescent lights or hair dryers. Adjust the antenna to minimise the interference.
Blank screen in PC mode Perhaps the TV cannot recognise the resolution set by the PC. Try setting it to the best resolution possible, or to another standard Windows resolution. Set the refresh rate to 60Hz by right clicking with your PC mouse onto your PC
Desktop, select "screen resolution" then select "advance settings" and set your refresh rate with the "screen refresh rate" drop down menu and press "apply".
42
FAQs
Problem
Pixelation
Pixelation, picture breaking up
Ghost (analog TV only)
Radio frequency interference
(Analog only)
Solution
If the antenna is located in the fringe area of a television signal where the signal is weak, the picture may be marred by dots. When the signal is extremely weak, you may need to install a special antenna to improve the reception. Other options include:
1. Adjust the position and orientation of the indoor/ outdoor antenna.
2. Check the connection of the antenna.
3. Fine tune the channel by selecting the channel into
"Channel Setting" and scroll down to "Fine Tune" to slightly adjust the frequency.
4. Try another channel. Broadcasting may be interrupted.
Black spots or horizontal streaks appear, or the picture flutters or drifts. This is usually caused by interference from a car ignition system, neon lamps, electric drills or other electrical appliances.
Ghosts are caused by the television signal following two paths: one is the direct path, the other is reflected from tall buildings, hills or other objects.
Changing the direction or position of the antenna may improve the reception.
This interference produces moving ripples or diagonal streaks and, in some cases, loss of contrast in the picture.
Identify and remove the radio interference source.
43
advertisement
Related manuals
advertisement