advertisement
EXT1865 7/25/00 16:31 Page 1
1
EXT1865 7/25/00 16:45 Page 3
Controls and functions
EXT1865 7/25/00 16:31 Page 2
Introduction
Congratulations on your purchase of the EXT 1865 cordless telephone. This phone is designed for reliability, long life, and outstanding performance.
Note: Some illustrations in this manual may differ from the actual unit for explanation purposes.
Features
• 900 MHz Digital Transmission with Extended Range
• Secure Digital Transmission
• Caller ID and Call Waiting Caller ID
• Advanced Caller ID with Call Waiting Option
• 50 Number Caller ID Memory
• Advanced Calling Features
• Message Waiting Indicator
• 3-Line, 16 Character Backlit Handset Display
• Dual Keypad
• Speakerphone
• Conference Call
• 30 Memory Dial Locations
• 3-Number Redial Memory
• Pause
• Pulse / Tone Dialing
• Page / Intercom
• 10 Day Standby Battery Life
• 7 Hour Talk Time
• Handset Earpiece and Ringer Volume Control
• Hearing Aid Compatible
Random Code
™ digital security automatically selects one of approx. 65,000 codes for the handset and base.
These features enhance your phone’s security and also prevent unauthorized calls as a result of your phone being activated by other equipment.
EXT1865 7/25/00 16:31 Page 5
Getting Started
Contents
Introduction / Features .............inside front cover
Controls and Functions .............inside front cover
Getting Started
Read this first.........................................................2
Step 1: Checking the package contents..............3
Step 2: Setting up the base unit ..........................4
Mounting the base unit on a wall ..........7
Step 3: Preparing the battery pack......................9
Basics
Making a call .......................................................11
Receiving a call ...................................................13
Adjusting the ringer and earpiece volume ........15
Redialing a call ....................................................16
Call Waiting..........................................................17
Telephone Features
Memory dialing
Storing phone numbers and names ................18
Making calls with memory dialing ..................21
Editing a stored name and/or phone number ..................................................23
Erasing a stored name and phone number ....25
Mute ................................................................26
3-way conference features ...............................27
Intercom feature................................................28
Call transfer feature ..........................................29
Advanced calling features ................................30
Caller ID Features
Caller ID...............................................................31
When the telephone rings ..................................32
Viewing the Caller ID Message list ....................33
Deleting information from the Caller ID list .....34
Using the Caller ID list .......................................36
Using Caller ID on Call Waiting service ............38
Additional Information
Changing the digital security code ....................39
Installing the beltclip ..........................................40
Headset installation .............................................40
Note on power sources ......................................41
Maintenance.........................................................41
Troubleshooting ................................................
42
Index ....................................................................
44
Basics
Telephone
Features
Caller ID
Features
Additional
Information
EXT1865 7/25/00 16:31 Page 2
Read this first
This cordless telephone must be set up before use. Follow these steps;
Step 1
(page 3)
Unpack and check the telephone and accessories.
Step 2
(page 4 to 8)
Next, choose the best location to set up the base unit.
Base unit
Step 3
(page 9 to 10)
Then, insert the battery pack into the handset.
You must charge the battery pack for more than 17 hours before using the phone.
Handset
About the digital security code
This cordless telephone uses a digital security code to prevent unauthorized access to your base unit. This security code prevents other cordless handsets from making calls through your base unit.
A random security code will be assigned automatically between your base unit and handset when you charge the battery pack for the first time.
If you want to reset the security code, see page 39.
2
EXT1865 7/25/00 16:31 Page 3
Checking the package contents
Make sure you have received the following items in the package.
• Base unit • Handset • AC adapter (AD-420)
• Rechargeable battery pack
(BT-905)
• Telephone line cord (2)
• Wall mount adapter
• This Owner's Manual
• Precautions and Important Safety Instructions
• Guide to Using Advanced Calling Features
• Beltclip
Uniden Parts Department
(800) 554-3988
Hours: M-F 7:00 AM to 5:00 PM CST.
We can also be reached on the web at www.uniden.com.
3
EXT1865 7/25/00 16:31 Page 4
Setting up the base unit
Do the following steps.
• Choose the best location
• Connect the base unit
• Choose the dialing mode
Choose the best location
Before choosing a location for your new phone, read the
INSTALLATION CONSIDERATIONS included in the PRECAUTIONS
AND IMPORTANT SAFETY INSTRUCTIONS brochure. Here are some important guidelines you should consider:
Avoid heat sources, such as radiators, air ducts, and sunlight
Avoid television sets and other electronic equipment
Avoid noise sources such as a window by a street with heavy traffic
Avoid microwave ovens
Avoid excessive moisture, extremely low temperatures, dust, mechanical vibration, or shock
4
Choose a central location
Avoid personal computers
Avoid other cordless telephones
• You should charge your handset for more than 17 hours before attaching to a phone line and using the phone.
• The location should be close to both a phone jack and continuous power outlet which is not switchable.
• Keep the base and handset away from sources of electrical noise such as motors and fluorescent lighting.
• Be sure there is sufficient space to raise the base antenna fully vertical.
• The base can be placed on a desk, tabletop or mounted on a standard wall plate.
EXT1865 7/25/00 16:31 Page 5
Connect the base unit
If you want to install the base unit on the wall, see page 7.
Place the power cord so it does not create a trip hazard, or where it could become chafed and create a fire or electrical hazard.
1
Connect the AC adapter to the DC IN 9V jack and to a standard
120V AC wall outlet.
2
Connect the telephone line cord to the TEL LINE jack and to a telephone outlet.
3
Set the base unit on a desk or tabletop and place the handset on the base unit.
Then raise the antenna to a vertical position.
5
EXT1865 7/25/00 16:31 Page 6
Use only the supplied AD-420 AC adapter. Do not use any other AC adapter.
Connect the AC adapter to a continuous power supply.
Place the base unit close to the
AC outlet so that you can unplug the
AC adapter easily.
If your telephone outlet isn't modular, contact your telephone company for assistance.
Polarity of the plug
Modular
Choose the dialing mode
Depending on your dialing system, set the PULSE-TONE switch as follows:
If your dialing system is Set the switch to
Tone TONE
Pulse PULSE
If you aren't sure of your dialing system
Make a trial call with the PULSE-TONE switch set to TONE .
If the call connects, leave the switch as is; otherwise, set to PULSE .
6
EXT1865 7/25/00 16:31 Page 7
Mounting the base unit on a wall
Standard wall plate mounting
This phone can be mounted on any standard telephone wall plate.
1
2 - 7
1
Snap the wall mount adapter into the notches on the base.
2
Plug the telephone line cord to the TEL LINE jack and the AC adapter to the
DC IN 9V jack.
3
Wrap the AC adapter cord inside the molded wiring channel. Then wrap the cord around the strain relief notch.
4
Plug the AC adapter into a standard 120V
AC wall outlet.
5
Plug the telephone line cord into the telephone outlet.
6
Raise the antenna to a vertical position.
7
Align the mounting slots on the base with the mounting posts on the wall. Push in and down until the phone is firmly seated.
7
EXT1865 7/25/00 16:31 Page 8
8
If the handset beltclip is attached, you cannot charge the handset with the display showing when the phone is mounted on the wall (See page 40).
8
On the base unit, pull the handset retainer out of the slot.
Rotate it clockwise 180 degrees.
9
Flip the retainer from front to back. Slide it back into the slot so that the lip of the retainer is up and the oval point is down.
The retainer holds the handset in place.
Direct wall plate mounting
If you don't have a standard wall plate, you can mount your phone directly to the wall. Before doing this, consider the following:
• Avoid electrical cables, pipes, or other items behind the mounting location that could cause a hazard when inserting screws into the wall.
• Try to mount your phone within 10 - 15 feet of a working phone jack to avoid excessive cord lengths.
• Make sure the wall material is capable of supporting the weight of the base and handset.
• Use #10 screws (minimum length of 1-3/8 inches) with anchoring devices suitable for the wall material where the base unit will be placed.
1
Insert two mounting screws into the wall, with their appropriate anchoring device,
3-15/16 inches apart. Allow about 3/16 of an inch between the wall and screwheads for mounting the phone.
2
Refer to steps 1 through 9 on page 7 and 8 to mount the telephone.
EXT1865 7/25/00 16:31 Page 9
Preparing the battery pack
Charge the battery pack for more than 17 hours before you start using your phone.
1
Press in on the battery cover release and slide the cover down until it comes off.
2
Connect the battery pack connector with the correct polarity (black and red wires), then insert the battery pack into the battery compartment.
3
Slide the battery cover on until it snaps into place.
4
Place the handset on the base.
5
Make sure that the status LED lights. If the LED doesn’t light, check to see that the AC adapter is plugged in and that the handset makes good contact with the base charging contacts.
Use only Uniden Battery (BT-905) supplied with your phone.
9
EXT1865 7/25/00 16:31 Page 10
Even when the battery pack is not being used, it will gradually discharge over a long period. For optimum performance, be sure to return the handset to the base unit after a telephone call for charging the battery.
Battery use time (per charge)
From fully charged
• Seven hours continuous use
• Ten days when the handset is in the standby mode
When the battery charge becomes low
When the voltage of battery pack in the handset is very low and needs to be charged, the phone is programmed to eliminate functions in order to save power. If the phone is not in use,
“ Low Battery ” flashes and none of the keys will operate. If the phone is in use, “ Low Battery ” flashes and the handset beeps.
Complete your conversation as quickly as possible and return the handset to the base unit for charging.
Cleaning the battery contacts
To maintain a good charge, it is important to clean the battery contacts on the handset and base unit with a dry cloth about once a month.
Do not use any liquids or solvents.
10
EXT1865 7/25/00 16:31 Page 11
During the operation you must press a key within 20 seconds or the phone will return to standby.
Making a call
With the handset
Dialing from standby
1
Enter the phone number. (Up to 32 digits.)
Example : Enter 8178583300
Press if you enter a wrong number at step 1.
2
Press . ” flashes on the display.
Then the volume setting appears for a few seconds.
For example, if the volume is set to high, the display shows:
3
The number is dialed. After about 5 seconds, the call-time display appears.
4
To hang up, press or place the handset on the base.
The call-time will be displayed for about 5 seconds.
Other Operations
To
To adjust the earpiece volume
To temporarily switch to tone dial Press
(When the base is set to pulse
. The following numbers dialed will be sent as mode) tone dialing.
To enter a pause in the dialing sequence
To improve reception
Do this
Press
Press or
. during the call.
Press .
“ Scanning ” appears on the display while changing a channel.
11
EXT1865 7/25/00 16:31 Page 12
Dialing from talk mode
1
Press . ” flashes on the display.
Then the volume setting appears for a few seconds.
For example, if the volume is set to high, the display shows:
The call-time display appears.
2
Dial the phone number.
Example : Enter 8178583300
3
To hang up, press or place the handset on the base. The call-time will be displayed for about 5 seconds.
With the base
1
Press .
2
Dial the number on the keypad.
3
When you finish the call, press to hang up.
12
EXT1865 7/25/00 16:31 Page 13
Receiving a call
With the handset
1
Phone rings.
2
Press . ” and volume setting appear on the display.
3
Talk with the caller.
4
To hang up, press or place the handset on the base. The call time will be displayed for about 5 seconds.
For more information on handling a call waiting call, refer to the “Guide to
Using Advanced Calling
Features” included in this package.
AutoTalk when ringing
When the AutoTalk setting is on and there is an incoming call, simply lift the handset from the base unit to answer the phone. See
“Setting Caller ID options” on page 31 for more details.
Any key answer when ringing
When the AutoTalk setting is on and the handset is off the base, press any handset key to answer the incoming call.
Call Waiting
Note: You must subscribe to Call Waiting service to use this feature.
When a call is received during a telephone call already in progress, press to switch to the new call.
If you also subscribe to Call Waiting on Caller ID, you will see the name and number of the caller in Call Waiting. (See page 38.)
13
EXT1865 7/25/00 16:31 Page 14
With the base
1
The base rings. The status lamp on the base flashes.
2
Press .
3
When you finish the call, press to hang up.
14
EXT1865 7/25/00 16:32 Page 15
Adjusting the ringer and earpiece volume
Handset ringer volume
In the standby mode, press or on the handset to select one of four ringer tone and volume combinations.
Handset ringer on/off switch
This switch turns the handset ringer on or off.
Earpiece volume
Pressing or during a telephone call will change the earpiece volume of the handset. This setting will remain in effect after the telephone call has ended.
When you press error sound beeps.
in Loud mode or press
Base ringer switch
This switch turns the base ringer on or off.
in Normal mode,
Base speaker volume
To control the speaker volume of the base, adjust the VOLUME slide switch as desired.
15
EXT1865 7/25/00 16:32 Page 16
If the recently dialed number exceeds 32 digits, only the first 32 digits are retained for redialing.
Redialing a call
With the handset
The last three phone numbers dialed can be quickly redialed.
Redialing from standby
1
Press .
The phone number that was last dialed appears on the display.
2
Press again.
Each press of will display one of the last three numbers dialed.
Most recent
3
Press .
The number will be dialed.
16
EXT1865 7/25/00 16:32 Page 17
Redialing from the talk mode
1
Press .
“ Talk ” flashes and the volume setting appears.
With the base
2
Press .
The last number dialed from the handset will be displayed. Only the last number dialed can be accessed while off-hook.
1
To call the last number dialed from the base, press .
2
Press .
The number will be dialed.
Call waiting
If you have call waiting service and a call waiting tone sounds, press to accept the call. After a short pause you will hear the new caller. To return to the original caller, press again.
The call waiting feature on the base and handset are independent of each other.
17
EXT1865 7/25/00 16:32 Page 18
18
In memory dialing operation, you must press a key within 20 seconds or the phone will return to standby.
Storing phone numbers and names
Memory Dialing allows you to dial a number using just a few key strokes. You can store up to 20 phone numbers in the handset and up to 10 phone numbers in the base.
With the handset
1
Press and hold until
“ Memory Store ” is displayed.
2
Use and or enter a two-digit number (01 - 20) to select the memory location where you would like to store the number.
3
Press .
The following screen appears and a cursor flashes indicating that the display is ready for the name to be entered.
If this screen appears, the selected memory location already has an entry stored in it. You must either change the entry in this location, clear the location, or select “ Go Back ” to choose another location.
4
Use , , or cannot exceed 13 characters.
to enter the name. The name
• Use and to scroll through the character menu. It contains upper and lower case letters and various characters.
• Use location.
and to move the cursor to the desired
• Use to delete characters as needed.
EXT1865 7/25/00 16:32 Page 19
5
Press .
“ Store Number ” is displayed. The cursor flashes indicating that the display is ready for the number to be entered.
6
Use the number keypad or to enter the phone number.
The phone number cannot exceed 20 digits.
• Use to enter pause in the dialing sequence.
The display shows a “ P ”.
• Use
The pause feature is useful for long distance calling, credit card dialing, or sequences that require a pause between digits.
to delete digits as needed.
7
Press .
The handset beeps and displays the confirmation screen.
Memory storage is complete.
For example, if you store a name and number into memory location number 07, the display shows
“ Memory07 Stored ”.
After about 2 seconds,
“ Memory Store ” is displayed.
8
Press standby mode.
or place the handset on the base to return to
19
EXT1865 7/25/00 16:32 Page 20
If you select the memory location which already has a stored number, it replaces the previous number.
With the base
You can only store numbers in the base’s memory.
1
Press .
The status LED blinks.
2
Dial the number you want to store (up to 20 digits).
3
Press and enter the memory location number (0-9) on the keypad.
A confirmation tone sounds, and the number is stored.
20
EXT1865 7/25/00 16:32 Page 21
If you press confirm the name and number stored in the selected memory location.
Making calls with memory dialing
With the handset
Memory dialing from standby
1
Press .
The handset displays your programmed memory locations.
To exit the memory function without dialing, handset returns to standby.
2
Press and or enter a two-digit number (01 - 20) to select the memory location you would like to dial.
3
Press . ” flashes and the volume setting appears on the display.
Then the displayed number is dialed.
Display a Programmed Number
Use and numbers display.
to toggle between the names and the
Program name Program number
When the stored phone number has 14 or more digits,
“ \ ” is displayed next to the 12th digit. Press to see the extra digits and to return.
21
EXT1865 7/25/00 16:32 Page 22
Memory dialing from talk mode
1
Press .
“ Talk ” flashes and the volume setting appears.
2
Press .
3
Enter a two-digit number (01 - 20) to select the memory location of the desired phone number. The selected phone number is displayed. Then the number is dialed.
With the base
1
Press .
2
Press and the memory location number (0-9).
Then the stored number will be dialed.
22
EXT1865 7/25/00 16:32 Page 23
Editing a stored name and/or phone number
1
Press and hold until the display shows the memory screen and any saved name/number.
2
Press and or enter a two-digit number (01 - 20) to select the memory location you would like to edit.
3
Press .
The following screen appears with the memory location number that you have selected in the display.
4
Press
“ Edit Memory ”, then press .
The following screen appears.
The cursor flashes indicating that the display is ready for the name to be edited. When a name has not been stored, the cursor appears at the beginning of the second line.
5
Press , , , name (See page 18).
, or
To edit only the phone number, skip this step.
to edit the
6
Press .
The following screen appears.
The cursor flashes indicating that the display is ready for the number to be edited.
23
EXT1865 7/25/00 16:32 Page 24
7
Use the dial keypad, phone number. or to edit the
The phone number cannot exceed 20 digits.
When the phone number will not be edited, skip this step.
8
Press .
The handset beeps and displays the confirmation screen. The memory storage is complete.
For example, if you store a name and number into memory location number 01, the display shows “ Memory01 stored ”.
After about 2 seconds,
“ Memory Store ” is displayed.
9
Press standby mode.
or place the handset on the base to return to
24
EXT1865 7/25/00 16:33 Page 25
Erasing a stored name and phone number
With the handset
1
Press and hold until the display shows the memory screen and any saved name/number.
2
Press and or enter a two-digit number (01 - 20) to select the memory location you would like to erase.
3
Press .
The following screen appears with the memory location number that you have selected in the display.
If you select NO, the display return to Memory
Store screen.
4
Press to move the cursor down to “ Delete Memory ” command line.
5
Press . The following confirmation screen appears.
6
Press to move the cursor to “ Yes ”.
7
Press or .
There is a confirmation tone and the entry is deleted.
The following screen appears.
8
After a few seconds the display returns to the “ Memory
Store ” screen. You may select another number to delete (return to step 2) or press to return to standby.
25
EXT1865 7/25/00 16:33 Page 26
With the base
1
Press .
The status LED blinks.
2
Press again.
3
Enter the memory location number (0-9) you want to delete. A confirmation tone sounds and the number is erased.
Mute
You can turn off the base microphone so that the person with whom you are talking cannot hear you.
When speaking with the base
1
Press during telephone call.
The speaker LED blinks and the microphone is turned off.
2
To cancel mute, press or .
26
EXT1865 7/25/00 16:33 Page 27
3-way conference features
3-way conference
The Uniden EXT 1865 permits 3-way conversations between the handset, base and an outside line.
Pressing the key on the base while dialing with the handset will set the 3-way conversation mode, and dialing is not affected.
When speaking on the base
1
Press on the handset.
This will set the 3-way conversation mode.
2
Press on the handset to cancel the
3-way conference. The base remains connected to the outside line.
Dialing during the 3-way conversation mode is possible only from the handset.
When speaking on the handset
1
Press on the base.
This will set the 3-way conversation mode.
2
Press on the base to cancel the 3-way conference. The handset remains connected to the outside line.
27
EXT1865 7/25/00 16:33 Page 28
28
If the page is not answered within one minute, the paging sound stops automatically.
Intercom feature
Using your EXT 1865 intercom
Paging from the handset to base
1
Press
(If no answer, press on the handset.
again to disconnect.)
2
At the base, press or to answer. Speak into the base microphone.
3
To turn off the intercom, press on the handset or on the base.
Paging from the base to handset
1
Press and release on the base.
The handset beeps. (If no answer, press again to disconnect.)
2
Press or on the handset to answer.
“ Intercom ” appears on the display.
3
To turn off the intercom, press on the handset or on the base.
EXT1865 7/25/00 16:33 Page 29
Call transfer feature
Transferring a call
To transfer from the handset to the base
1
Press on the handset.
The caller is put on hold and the intercom tone sounds on the base.
2
Press or the base. The intercom mode is activated but the caller is still on hold.
3
To transfer the call to the base, press on the handset.
To cancel the transfer, press on the base.
To transfer from the base to the handset
1
Press on base. The caller is put on hold and the intercom tone sounds on the handset.
2
Press or on the handset. The intercom mode is activated but the caller is still on hold.
3
To transfer the call to the handset, press on the base.
To cancel the transfer, press on the handset.
29
EXT1865 7/25/00 16:33 Page 30
Use of services may result in a fee, please contact your local telephone company for more information.
Advanced calling features
You can access a list of calling services provided by your local telephone company by pressing the three menu keys ( , key on the handset or and ) on the base. You may be required to subscribe to these services before they can be used. Please contact your local telephone company for more or to subscribe.
When you receive a call waiting call, you can also press the key on the handset or one of three menu keys on the base for the list of options to handle the incoming call.
For more information, please refer to the “ Guide to Using
Advanced Calling Features ” included in this package.
Message Waiting Indicator
The messages LED indicator on the base is designed to work with voice mail service provided by your local telephone company. The
LED will flash to indicate when you have received new voice messages and you can access your mailbox with the key. You must subscribe to voice mail service before this feature will operate. Please contact your local telephone company for more details.
Reset the indicator if it remains on after you have retrieved your messages. To reset the indicator, press and hold the key for five seconds or until the LED stops flashing.
For more information, please refer to the “ Guide to Using
Advanced Calling Features ” included in this package.
30
EXT1865 7/25/00 16:33 Page 31
You must subscribe to
Caller ID on Call Waiting in order to use this feature.
Caller ID
You must subscribe to the Caller ID service to use this feature.
When the telephone rings, the Caller ID feature allows you to view the caller's name and phone number on the display before you answer the phone.
The handset displays the phone number of the incoming call, the name, time, and the number of calls. Additionally, you can dial the displayed number, and store the information for memory dialing.
Setting Caller ID options
There are three Caller ID setup options available; they are AutoTalk,
CIDCW (Caller ID on Call Waiting), and Area Code.
AutoTalk allows you to answer the phone without pressing the button. If the phone rings when AutoTalk is on, simply remove the handset from the cradle and the phone automatically answers the call. If the phone rings when AutoTalk is off, you must press to answer the call.
Caller ID on Call Waiting (CIDCW) performs the same as regular
Caller ID on a call waiting number. Call Waiting options allow you to handle call waiting calls in seven different ways.
You must subscribe to CIDCW and CIDCW options from your phone company in order to use this feature.
If you enter 3-digit area code number in the Area Code option, your local area code does not appear in Caller ID messages. When reviewing Caller ID messages, you will see only the local seven digit number. For calls received from outside your local area code, you will see a full 10-digit number.
If your calling area requires 10-digit dialing, do not program this option.
To change your Caller ID options:
1
Press and hold .
The following screen appears.
2
Use and to move the cursor to the selection that you would like to change. Press to toggle between “ On ” and “ Off ” for “ Auto Talk ”. For CIDCW, choose “ On , Off ” or “ Opt ” depending on the type of service to which you subscribe.
3
When you wish to enter Area Code, press or to move the cursor to select “ Area Code ”. Then press and enter the 3 digits area code by using the number keypad
- . After entering Area Code, press .
4
After you have made your selections, press the handset to the charging cradle.
and return
31
EXT1865 7/25/00 16:33 Page 32
If you answer a call before the Caller ID message is received (Example: before the second ring), the
Caller ID message will not appear.
When the telephone rings
1
When the Caller ID message is received, the display shows the caller’s phone number along with the date and time. The incoming call information is stored in Caller ID record.
If the Caller ID service includes the caller’s name, the caller's name appears on the display (up to 15 letters).
Here are some typical displays;
When the phone number and name data are received When invalid data is received
When the call is received via a telephone company that does not offer Caller
ID service, the caller's phone number and name do not appear. (This includes international calls.)
When a private name is received When a private number is received
When an unknown name is received When an unknown number is received
When the call is via a private branch exchange
(PBX), the caller's phone number and name may not appear.
2
When you pick up the phone, the display changes to “ Talk ”.
Data errors appear as “
2
”.
32
EXT1865 7/25/00 16:33 Page 33
In Caller ID operation, if no key is pressed for more than 20 seconds, an error tone sounds and the telephone returns to the standby mode.
Viewing the Caller ID Message list
The Caller ID list stores information for up to 50 incoming calls even unanswered calls.
1
Press .
The summary screen appears.
The screen shows the number of new messages and total messages.
2
Press to display the latest caller
ID message.
If a call comes in via a telephone system that does not offer Caller ID service, no information is stored.
3
Press to see the next message.
Or press to see previous message.
4
Press to return to standby.
“ End ” appears when you have reviewed all messages in the Caller ID list. Press repeatedly to return to the summary screen.
Long Distance call and area code settings
While the incoming call information is displayed
(in step 2), press to return a long distance call. The prefix
“ 1” will be displayed at the beginning of the phone number. Press to include the area code. Pressing and repeatedly sets and cancels these settings. (When the phone number is 15 digits long
“ ” is not displayed.)
Each message can be up to 15 characters for the phone number and the name.
33
EXT1865 7/25/00 16:33 Page 34
If you get an incoming call, the deleting operation is canceled.
Deleting information from the Caller ID list
The EXT 1865 stores up to 50 messages. When the phone receives the 51st message, the oldest one in the list is automatically deleted.
Caller ID data can also be deleted manually.
Deleting a Caller ID message
1
Press .
Display the message to be deleted from the Caller ID list by pressing or .
2
Press .
3
Press or to ” or
“ No ”.
4
Press or .
When the pointer is at “ Yes ”:
A tone sounds and the Caller ID message is deleted.
Then the next Caller ID message is displayed.
When the pointer is at “ No ”:
The display returns to the Caller ID display.
34
EXT1865 7/25/00 16:33 Page 35
If you get an incoming call, the deleting operation is canceled.
Deleting all Caller ID name/numbers
1
Press .
2
Press .
3
Press or to
“ No ”.
Yes ” or
4
Press or .
When the pointer is at “ Yes ”:
A tone sounds and all stored Caller ID messages are deleted.
When the pointer is at “ No ”:
The display returns to the summary screen.
35
EXT1865 7/25/00 16:33 Page 36
When a long distance call has been set, “1” appears in the display.
Using the Caller ID list
Calling a party from the Caller ID list
You can place a call from the Caller ID list.
The EXT 1865 stores up to 50 messages.
1
Press .
Select the phone number that you want to dial by pressing or .
2
Press .
The displayed phone number dials automatically.
You cannot make a call from the Caller ID list if your EXT 1865 is connected to private branch exchange (PBX).
Long Distance calls and Area code
Set or cancel a long distance call by pressing by pressing then the area code while the incoming call information is displayed (in step 1).
Dial edit
You can edit the phone number of Caller ID data when you press after the step 1.
36
EXT1865 7/25/00 16:34 Page 37
You can not store a Caller
ID message, if no phone number appears in the message.
Storing Caller ID messages in Memory dialing
Messages shown in the Caller ID list can be stored in memory dialing.
Using the incoming call information (i.e., Caller ID list), the phone number of the party on the Caller ID list can be stored in memory dialing.
1
Press .
Select the phone number to be stored from the Caller ID list by pressing or .
If there is an incoming call or page, memory storage is canceled and the telephone is set to receive the incoming call or page.
2
Press .
3
Press and or enter a two-digit number (01-20) to select the memory location you would like to store.
4
Press .
A tone will sound. The number is stored in memory and the display returns to the Caller ID list.
If you select No, the display returns to Caller
ID message screen.
If a message has already been stored in the selected memory number’s location, a confirmation screen is displayed. Press to select “ Yes ”. Press overwrite. The display returns to the Caller ID list.
to
37
EXT1865 7/25/00 16:34 Page 38
Using Caller ID on Call Waiting service
“Caller ID” and “Call Waiting” are separate services. CIDCW
(Caller ID on Call Waiting) performs the same as regular Caller
ID on a call waiting number. You must subscribe to the “Caller
ID on Call Waiting (CIDCW) services” before you can use the following features. The call waiting service can be used independently. Please contact your telephone company for details.
1
When a new incoming call is received during your current telephone call, the phone number and the name of the new caller is displayed.
2
Press .
You will be able to talk with the second caller. The first caller will be put on hold.
3
To return to the first caller, press again.
When CIDCW is set to Opt in the Caller ID setup menu
(see page 31), you can press the key after receiving a call waiting call and view a list of ways to handle the new call. Choose an option using the and keys and press to activate.
38
EXT1865 7/25/00 16:34 Page 39
If the handset battery pack is completely discharged or the battery pack is removed, the digital security code will be lost.
If this happens, a new security code is set automatically the next time the battery pack is charged.
Changing the digital security code
The digital security code is an identification code used to connect the handset and the base unit. Normally, setting the code is not necessary.
The first time you charge your handset, the security code is automatically set. (See page 2.)
If you suspect that another cordless telephone is using the same security code, you can change the code.
1
Remove the handset from the base unit.
2
Press and hold
.
Return the handset to the base within 4 seconds while holding the key.
3
Leave the handset on the base for more than 3 seconds. A random, new security code is set.
Holding for more than 5 seconds resets the message indicator (Refer to page 30).
39
EXT1865 7/25/00 16:34 Page 40
If you have wall mounted the base, you must remove the beltclip to charge the handset with display showing.
Installing the beltclip
To attach the beltclip
Insert the beltclip into the holes on each side of the handset.
Press down until it clicks.
To remove the beltclip
Pull both sides of the beltclip to release the tabs from the holes.
40
Headset installation
Your phone may be used with an optional headset, the Uniden
HS910. To Use this feature, simply plug the headset plug into the headset jack. Your phone is ready for hands-free conversation.
EXT1865 7/25/00 16:34 Page 41
Note on power sources
Battery replacement and handling
When the operating time becomes short, even after a battery is recharged, please replace the battery.
With normal usage, your battery should last about one year.
Please contact your place of purchase for a replacement battery.
RECYCLING NICKEL-
CADMIUM BATTERIES
Nickel-cadmium cells are used in the battery pack. Please take your used nickel-cadmium battery packs to a store that recycles nickel-cadmium batteries.
Power Failure
During the period that the power is off, you will not be able to make or receive calls with the telephone.
Caution
• Use the specified battery pack.
• Do not remove the battery from the handset to charge it.
• Never throw the battery into a fire, disassemble it, or heat it.
• Do not remove or damage the battery casing.
Maintenance
When slightly dirty
Wipe with a soft, dry cloth.
When very dirty
Wipe with a soft cloth that has been dampened with diluted, neutral detergent. Dry with a dry cloth.
When the charging terminals become dirty
Wipe with a dry cloth.
Caution
Do not use paint thinner, benzene, alcohol, or other chemical products. Doing so may discolor the surface of the telephone and damage the finish.
41
EXT1865 7/25/00 16:34 Page 42
42
Troubleshooting
If your phone is not performing to your expectations, please try these simple steps first.
Symptom
The status LED won't come on when the handset is placed in the base unit.
The audio sounds weak and/or scratchy.
Can't make or receive calls.
The handset doesn't ring or receive a page.
The Caller ID/Caller ID on Call Waiting does not display.
Suggestion
• Make sure the AC adapter is plugged into the base unit and wall outlet.
• Make sure the handset is properly seated in the base unit.
• Make sure the charging contacts on the handset and base unit are clean.
• Press channel.
to select a clearer
• Make sure that the base unit antenna is in a vertical position.
• Move the handset and or base unit to a different location away from metal objects or appliances and try again.
• Make sure that you are not too far from the base.
• Check both ends of the base unit telephone line cord.
• Make sure the AC adapter is plugged into the base unit and wall outlet.
• Disconnect the AC adapter for a few minutes, then reconnect it.
• Reset the digital security code
(See page 39).
• Make sure is pressed.
• The battery pack may be weak. Charge the battery on the base unit for more than 17 hours.
• The handset may be too far away from the base unit.
• Place the base unit away from appliances or metal objects.
• Reset the digital security code
(See page 39).
• Turn on the ringer switch
(See page 15).
• The handset was picked up before the second ring.
• The call was placed through a switch board.
• Call your local telephone company to verify your Caller ID service is current.
• Make sure that the CIDCW option is set to On or Opt (See page 31).
EXT1865 7/25/00 16:34 Page 43
At Uniden, we’ll take care of you!
If you need any assistance with this product, please call our Customer Hotline at
1-800-297-1023
PLEASE DO NOT RETURN THIS PRODUCT TO THE PLACE OF PURCHASE.
Our Uniden representatives will be happy to help you with any matters regarding the operation of this unit, available accessories, or any other related matters.
Thank you for purchasing a Uniden product.
Hours: M-F 7:00 AM to 7:00 PM CST.
43
EXT1865 7/25/00 16:34 Page 44
Index
0-9
3-way Conference ................27
A
Adjusting ringer and earpiece/speaker volume.....15
Advanced Calling Features ..30
B
Battery pack
Preparing and charging ...9
Replacement and handling ..........................10
C
Call Waiting...........................17
Caller ID
Caller ID service .............31
Call Waiting.....................38
Deleting...........................34
Using ...............................36
Viewing ...........................33
Connection..............................5
D
Dialing mode ..........................6
Digital security code ........2, 39
E, F, G
Earpiece volume...................15
H
Headset installation ..............40
I, J, K, L
Installing the beltclip............40
Intercom feature ...................28
M, N, O
Maintenance..........................41
Making a call ........................11
Memory dialing
Making calls with memory dialing......21
Editing a stored name and/or phone number ...23
Erasing a stored name and phone number ........25
Storing phone numbers and names.......18
Mounting the base unit on a wall.................................7
Mute ......................................26
P, Q
Package contents....................3
R
Receiving a call ....................13
Redialing a call .....................16
Ringer volume ......................15
S
Setting up the base unit.........4
Speaker volume....................15
T, U, V, W, X, Y, Z
Transferring a call.................29
Troubleshooting....................42
44
EXT1865 7/25/00 16:34 Page 45
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project