Installation

Connect the Video input socket of monitor with reverse camera

M

V1/V2

USER'S MANUAL

The main function and characteristic

1. Full-function infrared remote controller

2. Support NTSC and PAL

3. Multi-language OSD.

4. 12V direct current external power, maximum electric current is 1.5A.

12.Two Video inputs.

Specifications

Product name: Car rear-view TFT-LCD color monitor

Number of dots: 480*234(RGB)

Active area: 127.2mm(W)*71.8mm(H)

Aspect ratio: 16: 9

Contrast Ratio: 400: 1

Response Time: B

→

W 50ms W

→

B 30ms

Video frequency : PAL / NTSC

Power supply

:

Automobile storage battery ( 12V ) automobile adapter

Accessories

Remote Controller , External Wire , User's Manual

Note:

This monitor must be connecting with car camera

for safety reverse driving

Thank you for using our product. We are pleased with the joy and convenience brought to you by our product. For better use and maintenance of the product, please read through this user manual before using and pay attention to the followings:

1.Do not open the casing if with no authorization to avoid electric shock caused by inner high voltage. If there is any problem, please switch off the monitor immediately and then inform our company or our dealers.

2.Do not expose the monitor to moisture, dust, oil smog, direct sunshine or

Environment affections. The monitor's operation temperature range is 0 ℃40 ℃ ; the monitor's storage temperature range is -20

℃-

60

℃.

3.DO not use diluents or other chemical detergents. Use soft cloth to remove dust or dirt on the monitor.

4.Use matching cable only and correct connection is required. The maximum car

Voltage is 12V. Lower the voltage if it is over 12V for use.

5.Use the AC adapter, battery pack and auto mobile adapter that come with the

Monitor only.

Special Caution:

We strongly recommend that it is better to let qualified technician or maintenance engineer to install the monitor.

If this LCD monitor does not work well, check the connection first, then the fuse.

When environmental temperature declines dramatically, dew may occur inside the

LCD car monitor, user need wait for a minute till the moisture vapors, then the

Monitor will return to good condition.

Slight dim or bright point on screen is normal and beyond failure. Please take it easy for use. If you park your car in an extremely cold or hot place, the video may become unclear is not a fault, when the temperature in car returns to normal level, the video will become clear.

Power Selection

※ Automobile storage battery: 12V DC

Use automobile adapter (suitable for vehicles with negative grounding) to

supply power to the monitor for the automobile's storage battery.

※ Battery pack power supply (12V DC)

Exterior Description

1.Remote Window

2.UP

3.Menu

4.Down

5.V1/V2

6.Power

Wire Connection

Remote Control

1. Power: Press to Power On/Off the monitor

2. Video select:V1/V2 switch

3. :Press to decrease the value

:Press to increase the value

4. Menu:Press to active the OSD menu,it shows

Brightness-Contrast-Saturation-HUE-

SOURCE-MODE-RESET

5. Image Mode Switch

1

4

5

2

3

6

Red to +12V

Black to ground

Video 1 input(yellow)

Video 2 input(yellow)

Blue to back