Gudsen MOZA Air User Manual

www.gudsen.com

MOZA Air

User Manual

Contents

1.

Instruction ···························································································Ⅱ

2.Package List ························································································· 01

3.Getting to K now about Moza Air ················································ 04

4.Getting Start ························································································ 05

5.Gimbal Control ··················································································· 10

6.

Firmware U pdate ··············································································· 11

7.

App Installation ················································································· 18

8.

Mobile App Instruction ·································································· 19

9.

Wireless Thumb Controller ···························································· 26

10.

Mimic Motion Control ·································································· 33

11.

Specifications ··················································································· 35

12.

Warranty ···························································································· 36

13.

F

AQ& Customer Support ····························································· 37

14.Index

······································································································· 38

Ⅰ Ⅱ

Instruction

Thank you for choosing Gudsen. The Moza Air is a professional handheld gimbal designed to create and capture cinematic camera movement. The Moza Air can support all mirrorless cameras and DSLRs up to 5.5 pounds. The Moza Air features advanced motor control technology, high-quality materials, and industry leading software.

By using this product, you hereby signify that you have read this document carefully and that you understand and agree to abide by the terms and conditions herein. You agree that you are solely responsible for your own conduct while using this product. You agree to use this product only for purpose that are proper and in accordance with all terms, precautions, practices, policies, and guidelines Gudsen has made and may make available.

Gudsen reserves the right of final explanation for this document and all relevant documents relating to Moza Air, and the right to make changes at any time without notice.

Contents

1.

Instruction ···························································································Ⅱ

2.Package List ························································································· 01

3.Getting to know about Moza Air ················································· 04

4.Getting Start ························································································ 05

5.Gimbal Control ··················································································· 10

6.

Firmware update ··············································································· 11

7.

App Installation ················································································· 18

8.

Mobile App Instruction ·································································· 19

9.

Wireless Thumb Controller ···························································· 26

10.

Mimic Motion Control ·································································· 33

11.

Specifications ··················································································· 35

12.

Warranty ···························································································· 36

13.

F

AQ& Customer Support ····························································· 37

14.Index

······································································································· 38

Ⅰ Ⅱ

Instruction

Thank you for choosing Gudsen. The Moza Air is a professional handheld gimbal designed to create and capture cinematic camera movement. The Moza Air can support all mirrorless cameras and DSLRs up to

7

pounds. The Moza Air features advanced motor control technology, high-quality materials, and industry leading software.

By using this product, you hereby signify that you have read this document carefully and that you understand and agree to abide by the terms and conditions herein. You agree that you are solely responsible for your own conduct while using this product. You agree to use this product only for purpose that are proper and in accordance with all terms, precautions, practices, policies, and guidelines Gudsen has made and may make available.

Gudsen reserves the right of final explanation for this document and all relevant documents relating to Moza Air, and the right to make changes at any time without notice.

Package list

Gimbal X 1

Moza Air Gimbal.

Handgrip X 1

Main handle of the Moza Air, battery holder.

Moza Modified Batteries X 3

Moza modified batteries.

Charger X 1

Moza modified battery charger.

Tripod （Optional） X 1

The base of Moza Air gimbal.

Moza Air User Manual

01 02

Package list

Wireless thumb controller

（

Optional

）

X 1

Wireless thumb controller.

Lens support X 1

Holder of camera lens.

Lens Support Screw X 1

To secure the camera lens holder.

Handle Bar X 1

Dual-hand grip accessories.

Side Handle X 2


Package list

Gimbal X 1

Moza Air Gimbal.

Handgrip X 1

Main handle of the Moza Air, battery holder.

Moza Modified Batteries X 3

Moza modified batteries.

Charger X 1

Moza modified battery charger.

Tripod X 1

The base of Moza Air gimbal.


01 02

Package list

Wireless

T

humb

C

ontroller

（

Optional

）

X 1

Wireless thumb controller.

Lens

S

upport X 1

Holder of camera lens.

Lens Support Screw X 1

To secure the camera lens holder.

Handle Bar X 1


Side Handle X 2



Quick release plate X 1

Mount your camera to MOZA Air

Cables X 4

①Panasonic Control Cable

②Sony Control Cable

③Canon Control Cable

④Mi

cro USB (

For firmware update or modification of parameters)

Tool Bag X 1

Carrier of the accessories

User Manual X 1

Instruction

ARCA-SWISS convertor X 1

ARCA-SWISS convertor

03 04

Getting to know about Moza Air

Getting to know about Moza Air

Control cable X 3

① Panasonic Control Cable

② Sony Control Cable

③ Canon Control Cable

USB cable X 1

For firmware update or modification of parameters.

Tool Bag X 1

Carrier of the accessories

User Manual X 1

Instruction

Anker convertor X 1

Anker convertor

Moza Air User Manual Getting to know about Moza Air

Getting to know about Moza Air

03 04

Battery Installation

Getting Started


Please charge the batteries with the MOZA charger before using the Moza Air.

Battery Safety Guidelines

WARNING

To avoid fire, serious injury, and property damage, observe the following safety guidelines when using, charging, or storing your batteries.

Battery Use

1.Do not let the batteries to come into contact with any kind of liquid. DO NOT leave batteries out in the rain or near a source of moisture. DO NOT drop the battery into water.

If the inside of the battery comes into contact with water, chemical decomposition may occur, potentially resulting in the battery catching on fire, and may even lead to an explosion.

2.If the battery falls in to water by accident, put it in a safe and open area immediately. Maintain a safe distance from the battery until it is completely dry. Never use the battery again, and dispose of the battery properly as described in the Battery

Disposal section below.

3.Do not extinguish any battery fire using water, sand, fire blanket or a dry powder fire extinguisher.

4.Never use non-MOZA modified batteries. If replacement or backup is needed, please purchase new batteries from http://www.gudsen.com.

5.Never use or charge swollen, leaky, or damaged batteries. If your batteries are abnormal, contact Gudsen technical support or Gudsen authorized vendor for further assistance.

6.The battery should be used in temperatures from 040℃. Use of the battery in environments above 40℃ can lead to a fire or explosion. Use of battery below 0 ℃ can lead to permanent damage.

7.DO NOT use the battery in strong electrostatic environments, Otherwise, the battery control board may malfunction.

8.Never disassemble or pierce the battery in any way or the battery may leak, catch

05

Battery Safety Guidelines fire, or explode.

9.DO NOT drop or strike batteries. DO NOT place heavy objects on the batteries or charger.

10.Electrolytes in the battery are highly corrosive. If any electrolytes make contact with your skin or eyes, immediately wash the affected area with fresh running water for at least 15 minutes, and then go to a doctor immediately.

11.DO NOT use the battery if it received impact from a fall or other accidents.

12.DO NOT heat batteries. DO NOT put batteries in a microwave oven or in a pressurized container.

13.DO NOT place lose battery cells on any conductive surface, such as a metal table.

14.DO NOT manually short-circuit the battery.

15.Clean battery terminals with a clean, dry cloth.

Battery Charging

1.DO NOT attach the batteries to wall outlets or car charger sockets directly, always use a MOZA official charger. Gudsen takes no responsibility if the battery is charged using a non-MOZA official charger,

2.Never leave the battery unattended during charging. DO NOT charge the battery near flammable materials or on flammable surfaces such as carpet or wood.

3.DO NOT charge the battery immediately after use, because the battery temperature may be too high. Wait to charge the battery until it cools down to near room temperature. Charging the battery outside of the temperature range of 040℃ may lead to leakage, overheating , or battery damage.

4.Disconnect the charger when not in use. Examine the charger regularly for damage to the cord, plug, enclosure, or other parts. DO NOT clean the charger with denatured alcohol or other flammable solvents. Never use a damaged charger.

Battery Storage

1.Keep batteries out of the reach of children and pets.

2.DO NOT leave the battery near heat sources such as a furnace or heater. DO NOT leave the batteries inside of a vehicle on hot days.

3.Always keep the battery in a dry place.

4.DO NOT store the battery fully discharged for long periods of time, otherwise it will over discharge and lead to permanent damage.

Battery Maintenance

1.Never use the battery when the temperature is too high or too low.

2.Never store the battery in environments with a temperature higher than 60℃.

Battery Disposal

Dispose of the battery in specific recycling boxes only after a complete discharge.

DO NOT place the battery in regular trash containers. Strictly follow your local regulations regarding the disposal and recycling of batteries

06

Battery Installation

Getting Started


Please charge the batteries with the MOZA charger before using the Moza Air.

Battery Safety Guidelines

WARNING

To avoid fire, serious injury, and property damage, observe the following safety guidelines when using, charging, or storing your batteries.

Battery Use

1.Do not let the batteries to come into contact with any kind of liquid. DO NOT leave batteries out in the rain or near a source of moisture. DO NOT drop the battery into water.

If the inside of the battery comes into contact with water, chemical decomposition may occur, potentially resulting in the battery catching on fire, and may even lead to an explosion.

2.If the battery falls in to water by accident, put it in a safe and open area immediately. Maintain a safe distance from the battery until it is completely dry. Never use the battery again, and dispose of the battery properly as described in the Battery

Disposal section below.

3.Do not extinguish any battery fire using water, sand, fire blanket or a dry powder fire extinguisher.

4.Never use non-MOZA modified batteries. If replacement or backup is needed, please purchase new batteries from http://www.gudsen.com.

5.Never use or charge swollen, leaky, or damaged batteries. If your batteries are abnormal, contact Gudsen technical support or Gudsen authorized vendor for further assistance.

6.The battery should be used in temperatures from 040℃. Use of the battery in environments above 40℃ can lead to a fire or explosion. Use of battery below 0 ℃ can lead to permanent damage.

7.DO NOT use the battery in strong electrostatic environments, Otherwise, the battery control board may malfunction.

8.Never disassemble or pierce the battery in any way or the battery may leak, catch

05

Battery Safety Guidelines fire, or explode.

9.DO NOT drop or strike batteries. DO NOT place heavy objects on the batteries or charger.

10.Electrolytes in the battery are highly corrosive. If any electrolytes make contact with your skin or eyes, immediately wash the affected area with fresh running water for at least 15 minutes, and then go to a doctor immediately.

11.DO NOT use the battery if it received impact from a fall or other accidents.

12.DO NOT heat batteries. DO NOT put batteries in a microwave oven or in a pressurized container.

13.DO NOT place lose battery cells on any conductive surface, such as a metal table.

14.DO NOT manually short-circuit the battery.

15.Clean battery terminals with a clean, dry cloth.

Battery Charging

1.DO NOT attach the batteries to wall outlets or car charger sockets directly, always use a MOZA official charger. Gudsen takes no responsibility if the battery is charged using a non-MOZA official charger,

2.Never leave the battery unattended during charging. DO NOT charge the battery near flammable materials or on flammable surfaces such as carpet or wood.

3.DO NOT charge the battery immediately after use, because the battery temperature may be too high. Wait to charge the battery until it cools down to near room temperature. Charging the battery outside of the temperature range of 040℃ may lead to leakage, overheating , or battery damage.

4.Disconnect the charger when not in use. Examine the charger regularly for damage to the cord, plug, enclosure, or other parts. DO NOT clean the charger with denatured alcohol or other flammable solvents. Never use a damaged charger.

Battery Storage

1.Keep batteries out of the reach of children and pets.

2.DO NOT leave the battery near heat sources such as a furnace or heater. DO NOT leave the batteries inside of a vehicle on hot days.

3.Always keep the battery in a dry place.

4.DO NOT store the battery fully discharged for long periods of time, otherwise it will over discharge and lead to permanent damage.

Battery Maintenance

1.Never use the battery when the temperature is too high or too low.

2.Never store the battery in environments with a temperature higher than 60℃.

Battery Disposal

Dispose of the battery in specific recycling boxes only after a complete discharge.

DO NOT place the battery in regular trash containers. Strictly follow your local regulations regarding the disposal and recycling of batteries

06


Mo unting

Y

our

C

amera

1.Please place the camera on the quick release plate, aim the 1/4" threaded hole at the bottom of the camera with the empty slot of the mounting plate.

2.then tighten the secure screw on the quick release system.

Balancing

Balance the Tilt Adjustment Arm

1.Please loosen Tilt Adjustment Screw and adjust the Tilt

Adjustment Arm until it remains still with the lens facing vertical or toward the ground.

2.Once balanced tighten the Tilt Adjustment Screw.

Balanc

ing

the

C

amera

1.Please move the camera forward and backward until you find a position where the lens face front and the camera can keep complete still.

2.Tighten the camera lock-knob.

07

Balancing the Roll Adjustment Arm

1.Please loosen the quick Release system adjustment screw, be sure to leave a little space between the camera and the motor, in this case move the quick release plate to the till motor as possible as you can, then tighten the quick

Release system adjustment screw.

2.Please loosen the Roll Adjustment Screw and adjust the Roll Adjustment Arm until the camera remains still and level with the horizon.

3.Once balanced tighten the Roll Adjustment Screw.

Balancing the Yaw Adjustment Arm

1.Please loosen the Yaw Adjustment

Screw and adjust the Yaw Adjustment Arm until the camera remains still and level with the horizon.

2.Once balanced tighten the Yaw

Adjustment Screw.

08


Mounting your camera

1.Please place the camera on the quick release plate, aim the 1/4" threaded hole at the bottom of the camera with the empty slot of the mounting plate.

2.then tighten the secure screw on the quick release system.

Balancing

Balanc

ing

the Tilt Adjustment Arm

1.Please loosen Tilt Adjustment Screw and adjust the Tilt

Adjustment Arm until it remains still with the lens facing vertical or toward the ground.

2.Once balanced tighten the Tilt Adjustment Screw.

Balance the camera

1.Please move the camera forward and backward until you find a position where the lens face front and the camera can keep complete still.

2.Tighten the camera lock-knob.

07

Balancing the Roll Adjustment Arm

1.Please loosen the quick Release system adjustment screw, be sure to leave a little space between the camera and the motor, in this case move the quick release plate to the till motor as possible as you can, then tighten the quick

Release system adjustment screw.

2.Please loosen the Roll Adjustment Screw and adjust the Roll Adjustment Arm until the camera remains still and level with the horizon.

3.Once balanced tighten the Roll Adjustment Screw.

Balancing the Yaw Adjustment Arm

1.Please loosen the Yaw Adjustment

Screw and adjust the Yaw Adjustment Arm until the camera remains still and level with the horizon.

2.Once balanced tighten the Yaw

Adjustment Screw.

08


Dual

H

andle Setup

Install the two Side Handles and secure them by screwing them into each side of the handle clamp. Loosen the lock-screw in the middle of the handle clamp. Then clamp onto the handgrip of the Moza Air, adjust desired position and secure the lock-screw.

Controls

Moza Air Controls

Camera Control Cables

Connect the camera to the Camera Connection (Mini-USB port) on the tilt motor with the control cable. Please make sure the cable doesn't affect the movement of the

Moza Air. When finished, test by pressing the Power on/Off button on the Moza Air to start/stop the camera's recording. （ Check page 20 to select the right camera profile.

）

Shutter cable is required when operating the advanced time-lapse.

Sony control cable can be used as shutter cable on Sony camera with MULTI input.

Other brand cameras shall purchase extra shuttle cable to enable the advanced timelapse. You need to change camera type to 'OTHER' when use shuttle cable.

Model Example

Canon 5D3 、 60D

Recording Recording control cable

Picture taking control

Picture taking control cable support Canon control cable support C1 or C2 shutter cable EOS DSLR

EOS Cinema

Alpha

GH

BMD

NIKON

OTHERS

Sony A7s 、 A7s2 support Sony control cable support

Sony control cable or S1 shutter cable

Panasonic GH3 、 GH4 support Panasonic control cable

BMPC 、 BMPCC

D4 、 D800 support support Panasonic control cable Not Support support support

N1 or N3 shutter cable

Camera typical shutter cable

09

Available operation modes

1.Yaw-follow mode: The Yaw Adjustment Arm follow the movement while the Tilt and Roll Adjustment Arm are locked.

2.Tilt - Yaw follow mode: The Tilt and Yaw Adjustment Arm follows the movement while the Roll Adjustment Arm is locked.

3.All lock mode: All three Adjustment Arm are locked.

4. Roll-follow mode: The Roll Arm Adjustment Arm follows the movement while the

Tilt and Yaw Adjustment Arm are locked.

Joystick

1.One quick press: Yaw-follow mode

2.Double quick press: Tilt-yaw follow mode

3.Triple quick press: All-lock mode.

4.Four times quick press: Roll-follow mode.

5.Long press/quick press again: Enable sleeping mode/ wake up

6.Normal turning on, then hold down the joystick while quick press the power button: Auto-Tune.

7.Normal turning on, then hold down the joystick while three times quick press the power button: Six direction calibration.

10

Power button

1.One quick press: Start/Stop recording

2.Double quick press: Photo-taking

3.Triple quick press: auto-center

4.Four times press: Enable roll control

5.Long press: Power on/off the Moza Air


Dual handle Setup

Install the two Side Handles and secure them by screwing them into each side of the handle clamp. Loosen the lock-screw in the middle of the handle clamp. Then clamp onto the handgrip of the Moza Air, adjust desired position and secure the lock-screw.

Controls

Moza Air Controls

Camera Control Cables

Connect the camera to the Camera Connection (Mini-USB port) on the tilt motor with the control cable. Please make sure the cable doesn't affect the movement of the

Moza Air. When finished, test by pressing the Power on/Off button on the Moza Air to start/stop the camera's recording. （ Check page 20 to select the right camera profile.

）

Shutter cable is required when operating the advanced time-lapse.

Sony control cable can be used as shutter cable on Sony camera with MULTI input.

Other brand cameras shall purchase extra shuttle cable to enable the advanced timelapse.

Model

EOS DSLR

EOS Cinema

Example

Canon 5D3 、 60D

Recording Recording control cable

Picture taking control support Canon control cable support

Picture taking control cable

C1 or C2 shutter cable

Alpha

GH

BMD

NIKON

OTHERS

Sony A7s 、 A7s2 support Sony control cable support

Sony control cable or S1 shutter cable

Panasonic GH3 、 GH4 support Panasonic control cable

BMPC 、 BMPCC

D4 、 D800 support support Panasonic control cable Not Support support support

N1 or N3 shutter cable

Camera typical shutter cable

09

Available

O

peration

M

odes

1.Yaw-follow mode: The Yaw Adjustment Arm follow the movement while the Tilt and Roll Adjustment Arm are locked.

2.Tilt - Yaw follow mode: The Tilt and Yaw Adjustment Arm follows the movement while the Roll Adjustment Arm is locked.

3.All lock mode: All three Adjustment Arm are locked.

4. Roll-follow mode: The Roll Arm Adjustment Arm follows the movement while the

Tilt and Yaw Adjustment Arm are locked.

Joystick

1.One quick press: Yaw-follow mode

2.Double quick press: Tilt-yaw follow mode

3.Triple quick press: All-lock mode.

4.Four times quick press: Roll-follow mode.

5.Long press/quick press again: Enable sleeping mode/ wake up

6.Normal turning on, then hold down the joystick while quick press the power button: Auto-Tune.

7.Normal turning on, then hold down the joystick while three times quick press the power button: Six direction calibration.

10

Power

B

utton

1.One quick press: Start/Stop recording

2.Double quick press: Photo-taking

3.Triple quick press: auto-center

4.Four times press: Enable roll control

5.Long press: Power on/off the Moza Air


Firmware Update

This tutorial contains two parts ：

Moza Air firmware update tutorial.

Wireless thumb controller firmware update tutorial.

Part1: Moza Air

F

irmware

U

pdate

T

utorial.

Notice:

Attention ： All the firmware files are available on the server, Gudsen has not released any Moza product firmware update packages on the network. The only access to do the update is upgrading via Moza Assistant software.

Step 1 ： Download Moza Assistant

Please download the Moza Assistant from here: http://www.gudsen.com/moza-airdownloads.html, and select the proper software according to your computer operating system.

Download the software package and unzip the files and install the driver.

Please refer to the link below if your Mac computer reject the driver installation and get the error message like the picture suggested: http://www.iclarified.com/28180/how-to-open-applications-from-unidentifieddevelopers-in-mac-os-x-mountain-lion

Firmware Update

Step 2 ： Enter upgrade mode and start to upgrade

① Plug in the Moza Air on the computer and run the Moza Assistant software.

② Hold down the joystick and quick press the power button on the Moza Air, the

LED will turn to solid blue and the below software interface will pop up.

③ Click on "Upgrade” button to start the update. It will take about 1 to 2 minutes to finish it, the software interface will show on when the upgrade is finished ：

11

④ Turn off the Moza Air first (important!) , then close the software, and long pressing the power button to turn on the Moza Air （ Not enter upgrade mode, just regular power on the gimbal ） and run the Moza Assistant software again.

12


Firmware Update

This tutorial contains two parts ：

Moza Air firmware update tutorial.

Wireless thumb controller firmware update tutorial.

Part1: Moza Air firmware update tutorial.

Notice:

Attention ： All the firmware files are available on the server, Gudsen has not released any Moza product firmware update packages on the network. The only access to do the update is upgrading via Moza Assistant software.

Step 1 ： Download Moza Assistant

Please download the Moza Assistant from here: http://www.gudsen.com/moza-airdownloads.html, and select the proper software according to your computer operating system.

Download the software package and unzip the files and install the driver.

Please refer to the link below if your Mac computer reject the driver installation and get the error message like the picture suggested: http://www.iclarified.com/28180/how-to-open-applications-from-unidentifieddevelopers-in-mac-os-x-mountain-lion

Firmware Update

Step 2 ： Enter upgrade mode and start to upgrade

① Plug in the Moza Air on the computer and run the Moza Assistant software.

② Hold down the joystick and quick press the power button on the Moza Air, the

LED will turn to solid blue and the below software interface will pop up.

③ Click on "Upgrade” button to start the update. It will take about 1 to 2 minutes to finish it, the software interface will show on when the upgrade is finished ：

11

④ Turn off the Moza Air first (important!) , then close the software, and long pressing the power button to turn on the Moza Air （ Not enter upgrade mode, just regular power on the gimbal ） and run the Moza Assistant software again.

12


Step 3 ： Gyroscope/Accelerometer Calibration

① A normal turning on will lead to the software interface below, and click on the

"calibration” button on the top bar.

Calibration

③ Here is the the software interface when you shut off the motor ：

②Uncheck the "Motor On/Off” on the calibration interface.

④ Please try to keep the Moza Air still then click on "Start” button under gyroscope calibration, Software interface below will show up which means it is a successful calibration （ It takes about 5-10 seconds to do the gyroscope calibration).

13

⑤Click “Start”, before accelerometer calibration, the Moza AirCross needs to be laid down on the desk like the picture suggested, please loosen the quick release plate secure screw at first.

14


Step 3 ： Gyroscope/Accelerometer Calibration

① A normal turning on will lead to the software interface below, and click on the

"calibration” button on the top bar.

Calibration

③ Here is the the software interface when you shut off the motor ：

②Uncheck the "Motor On/Off” on the calibration interface.

④ Please try to keep the Moza Air still then click on "Start” button under gyroscope calibration, Software interface below will show up which means it is a successful calibration （ It takes about 5-10 seconds to do the gyroscope calibration).

13

⑤Click “Start”, before accelerometer calibration, the Moza AirCross needs to be laid down on the desk like the picture suggested, please loosen the quick release plate secure screw at first.

14

Moza Air User Manual Thumb controller firmware

Part 2:MOZA Thumb controller firmware upgrade Tutorial

⑥Please make sure the Camera Holder is absolutely horizontal, then click "OK” button to begin the calibration, Software interface will show on when it is a successful calibration （ It takes about 5-10 seconds to do the accelerometer calibration).

⑦ Please turn off the Moza Air then turn it on again via long pressing the power button, and unplug it from computer, then enjoy your Moza Air ！

15

Step 1:Enter upgrade mode

With the thumb controller off, long press "SPEED” without releasing it, connect controller to computer through USB port, release "SPEED” button when the screen displays "connecting”

16

Moza Air User Manual Thumb controller firmware

Part 2:MOZA Thumb

C

ontroller

F

irmware

U

pgrade Tutorial

⑥Please make sure the Camera Holder is absolutely horizontal, then click "OK” button to begin the calibration, Software interface will show on when it is a successful calibration （ It takes about 5-10 seconds to do the accelerometer calibration).

⑦ Please turn off the Moza Air then turn it on again via long pressing the power button, and unplug it from computer, then enjoy your Moza Air ！

Step 1:Enter upgrade mode

With the thumb controller off, long press "SPEED” without releasing it, connect controller to computer through USB port, release "SPEED” button when the screen displays "connecting”

15 16


Step 2

① Launch MOZA-Assistant after installing the driver. When the screen displays

"Connect OK”, MOZA -Assistant enters the interface of firmware upgrade.

MOZA Assistant APP

App Installation

Mobile App

MOZA Assistant App is available both in Apple Store and Google Play Store. iOS use the keyword “MOZA ” to search or scan the QR Code to download it on your phone.

Android use the keyword”Moza Assistant” to search or scan the QR Code to download it on your phone.

② Ensure the network being connected, MOZA-Assistant will display information of firmware version and upgrade, click "Upgrade” to start upgrading the thumb controller.

When the update is done, the thumb controller display will show the “Upgraded

OK” information, the firmware update for wireless thumb controller is completed!

Desktop App(GUI)

iOS Android

The GUI is a desktop software to update the gimbal firmware and change parameters of the gimbal. It is free to download at: http://www.gudsen.com/moza-air-downloads.html

17 18


Step 2

① Launch MOZA-Assistant after installing the driver. When the screen displays

"Connect OK”, MOZA -Assistant enters the interface of firmware upgrade.

MOZA Assistant APP

App Installation

Mobile App

MOZA Assistant App is available both in Apple Store and Google Play Store. iOS use the keyword “MOZA ” to search or scan the QR Code to download it on your phone.

Android use the keyword”Moza Assistant” to search or scan the QR Code to download it on your phone.

② Ensure the network being connected, MOZA-Assistant will display information of firmware version and upgrade, click "Upgrade” to start upgrading the thumb controller.

When the update is done, the thumb controller display will show the “Upgraded

OK” information, the firmware update for wireless thumb controller is completed!

iOS

Desktop App(GUI)

Android

The GUI is a desktop software to update the gimbal firmware and change parameters of the gimbal. It is free to download at: http://www.gudsen.com/moza-air-downloads.html

17 18

Home Page

Device

P

age

Firmware Version

Bluetooth Signal

Motor On/Off button

Parameter Settings

Calibration

Moza Air User Manual MOZA Assistant APP

Moza App Instruction

Remote Control Page

Battery Life Status

Device Name

Re-Center

Remote control& normal time-lapse

Advanced time-lapse

19

1.

Recenter the Moza Air

2. Joystick

3.

Roll Control

4.

Normal Motion Time-Lapse

*The Roll control is only available at this page, the default angle is 0±45°.

Click on the Normal Motion Time-

Lapse this page will show on. Basic time lapse motion can be set for your Moza

Air.

Parameter Setting

Camera Model:

There are 4 types of camera models available on start/stop remote control are listed as below:

EOS DSLR profile for Canon series(Canon 5DⅡ

/5DⅢ /60D /7D /70D).

Alpha profile for Sony series (a7S /a7SⅡ /a7R

/a7RⅡ).

GH profile for Panasonic camera(GH3 /GH4).

BMD profile for Blackmagic Design camera

(BMPCC /BMCC /BMPC).

*Canon 5DⅣ is available as well, but it needs to purchase an extra camera control wire, please contact [email protected] for the solution.

20

Home Page

Device page

Firmware Version

Bluetooth Signal

Motor On/Off button

Parameter Settings

Calibration

Moza Air User Manual MOZA Assistant APP

Moza App Instruction

Remote Control Page

Battery Life Status

Device Name

Re-Center

Remote control& normal time-lapse

Advanced time-lapse

19

1. Recenter the Moza Air

2. Joystick

3. Roll Control

4. Normal Motion Time-Lapse

*The Roll control is only available at this page, the default angle is 0±45°.

Click on the Normal Motion Time-

Lapse this page will show on. Basic time lapse motion can be set for your Moza

Air.

Parameter Setting

Camera Model:

There are 4 types of camera models available on start/stop remote control are listed as below:

EOS DSLR profile for Canon series(Canon 5DⅡ

/5DⅢ /60D /7D /70D).

Alpha profile for Sony series (a7S /a7SⅡ /a7R

/a7RⅡ).

GH profile for Panasonic camera(GH3 /GH4).

BMD profile for Blackmagic Design camera

(BMPCC /BMCC /BMPC).

*Canon 5DⅣ is available as well, but it needs to purchase an extra camera control wire, please contact [email protected] for the solution.

20


Balance Parameter

There are four groups parameters for selecting are listed as below:

1(Profile 1);

3(Profile 3);

2(Profile 2);

4(Profile 4);

Please begin with profile 4. If you get the vibration with the current profile, select a lower one until the vibration is gone. Or you can try the Auto-Tune feature at the same interface.

Parameter

Follow Mode

There are 4 kinds of follow mode, they are listed below:

Yaw-follow mode;

Pitch-yaw follow mode;

Roll follow mode;

Please check the page 10 to learn more about operation mode.

Pitch-follow mode;

All-lock mode;

User-defined;

21 22

Yaw/Pitch/Roll Adjustment Arm parameter setting.

The motor parameters for yaw/pitch/roll.

Follow Enable ： Enable the follow mode at the current

Adjustment Arm.

Motion Control Enable ： The current Adjustment Arm is no longer functional at the Motion Control when it is disable.

Manual Positioning Enable ： The camera can lock on at the specific position manually when the current

Adjustment Arm is no at the follow mode.

Follow Speed & Control Speed

Follow Speed

The speed of the Moza Air follow movement. Range from 0-100.

Control Speed

The sensitivity of joystick speed to control the Moza

Air movement. Range from 0-100.

Auto Tune

Moza will tune the parameters automatically one time.

For some special camera setup the Auto-Tune couldn't select the best profile for your Moza gimbal, please select the profile manually.

Save Parameters

Save the parameters you set. Your Moza device will automatically use the parameters pre-set well next time.

Reset Current Parameters

Reset current parameters and restore to its default values.

Factory Reset

Rest all parameters and restore to its default values.


Balance Parameter

There are four groups parameters for selecting are listed as below:

1(Profile 1);

3(Profile 3);

2(Profile 2);

4(Profile 4);

Please begin with profile 4. If you get the vibration with the current profile, select a lower one until the vibration is gone. Or you can try the Auto-Tune feature at the same interface.

Parameter

Follow Mode

There are 4 kinds of follow mode, they are listed below:

Yaw-follow mode;

Pitch-yaw follow mode;

Roll follow mode;

Please check the page 10 to learn more about operation mode.

Pitch-follow mode;

All-lock mode;

User-defined;

21 22

Yaw/Pitch/Roll Adjustment Arm parameter setting.

The motor parameters for yaw/pitch/roll.

Follow Enable ： Enable the follow mode at the current

Adjustment Arm.

Motion Control Enable ： The current Adjustment Arm is no longer functional at the Motion Control when it is disable.

Manual Positioning Enable ： The camera can lock on at the specific position manually when the current

Adjustment Arm is no at the follow mode.

Follow Speed & Control Speed

Follow Speed

The speed of the Moza Air follow movement. Range from 0-100.

Control Speed

The sensitivity of joystick speed to control the Moza

Air movement. Range from 0-100.

Auto Tune

Moza will tune the parameters automatically one time.

For some special camera setup the Auto-Tune couldn't select the best profile for your Moza gimbal, please select the profile manually.

Save Parameters

Save the parameters you set. Your Moza device will automatically use the parameters pre-set well next time.

Reset Current Parameters

Reset current parameters and restore to its default values.

Factory Reset

Rest all parameters and restore to its default values.

Gyroscope and Accelerometer Calibration

Moza Air User Manual Advanced time lapse

Advanced time lapse

Click on the “ G yroscope/Accelerometer Calibration” button on the device page and this notification will show on. Please click on “OK” button to go on the calibration.

Then begin with the gyroscope calibration as the pictures shown below, you can go back to the device page by clicking on the white triangle button. It takes 5-10 seconds to finish gyroscope calibration, leave the Moza Air alone and keep it still during the calibration.

① Mount the camera on the Moza Air then turn it on

② Set the camera on Manual Focus mode, set camera shutter, ISO, aperture and turn off the SteadyShot feature of the camera(Here we use Sony camera as an example in the tutorial).

③ Turn on mobile phone Bluetooth, run the MOZA Assistant App and connect it to the Moza Air.

After the gyroscope calibration then begin with the accelerometer calibration. Please loosen the quick release plate secure screw at first, then follow the picture to adjust it at the correct position, make sure camera holder is horizontal, then click on “Start” to do the accelerometer calibration. It takes about 5-10 seconds to finish the accelerometer calibration.

23

④ Enter the App main interface, select parameter setting, and switch your current camera model (Here we use Sony camera as an example in the tutorial) and save it. More information Please refer to the Support Camera Form at page 9.

⑤ Connect the camera to the Moza Air with the camera control cable and go back to the Home page and select Advanced Time-Lapse

⑥ Use the app to set the camera movement.

Notice: Up to 8 points can be add on the motion time-lapse.

24

Gyroscope and Accelerometer Calibration

Moza Air User Manual Advanced time lapse

Advanced

T

imelapse

Click on the “ G yroscope/Accelerometer Calibration” button on the device page and this notification will show on. Please click on “OK” button to go on the calibration.

Then begin with the gyroscope calibration as the pictures shown below, you can go back to the device page by clicking on the white triangle button. It takes 5-10 seconds to finish gyroscope calibration, leave the Moza Air alone and keep it still during the calibration.

① Mount the camera on the Moza Air then turn it on

② Set the camera on Manual Focus mode, set camera shutter, ISO, aperture and turn off the SteadyShot feature of the camera(Here we use Sony camera as an example in the tutorial).

③ Turn on mobile phone Bluetooth, run the MOZA Assistant App and connect it to the Moza Air.

After the gyroscope calibration then begin with the accelerometer calibration. Please loosen the quick release plate secure screw at first, then follow the picture to adjust it at the correct position, make sure camera holder is horizontal, then click on “Start” to do the accelerometer calibration. It takes about 5-10 seconds to finish the accelerometer calibration.

23

④ Enter the App main interface, select parameter setting, and switch your camera model to 'OTHER' (Sony alpha camera with MULTI input should be 'Alpha' ) and save it.

More information Please refer to the Support Camera Form at page 9.

⑤ Connect the camera to the Moza Air with the shuttle cable or camera control cable and go back to the Home page and select Advanced Time-Lapse

⑥ Use the app to set the camera movement.

Notice: Up to 8 points can be add on the motion time-lapse.

24

Moza Air User Manual Wireless Thumb Controller

Wireless Thumb Controller (Optional Accessory)

⑦ Set the shutter time, the shutter duration, the video frame rate and the total length of the shot a. Shutter time > shutter duration > camera shutter time

Recommended Settings: Shutter duration = camera shutter time +1S

Shutter Interval = camera shutter time +2S

For example: the shutter time of the camera is 1, so the shutter duration is 2 and the shutter time is 3. b. The App automatically calculates the number of images can be taken after saving the setting above.

⑧ Preview the delay setting path, while the stabilizer will move according to the set trajectory, but will not take photos. After preview, you can start the time-lapse photography

25

Joystick

1.Moza Air Moza Air remote control ；

2.Up/down scrolling: Select the item at the menu.

3.Left scrolling: Go back to the upper menu.

4.Right scrolling: Go to the next menu or save the changes.

SPEED Button

1.Quick press to select the speed. （ L,M,H ） .

2.Long press to select between Focusing speed and

Moza Air moving speed.

OPTIONS Button

1.Quick press to switch the follow mode (Default yaw-follow, yaw-pitch follow, roll follow and all-lock).

2.Long press to enter the setting menu.

ON/OFF Button

1.Long press the button to power on/off the Moza Air.

2.Quick press to start camera REC, quick press again to stop camera REC.

Roller

1.Use the Roller knob to control camera focus by rolling the knob left to right. Available for Canon camera with USM lens.

2.Double quick press the roller to re-center the Moza Air.

USB Port

1.Charging the thumb controller.

2.Firmware update.

26

Moza Air User Manual Wireless Thumb Controller

Wireless Thumb Controller (Optional Accessory)

⑦ Set the shutter time, the shutter duration, the video frame rate and the total length of the shot a. Shutter time > shutter duration > camera shutter time

Recommended Settings: Shutter duration = camera shutter time +1S

Shutter Interval = camera shutter time +2S

For example: the shutter time of the camera is 1, so the shutter duration is 2 and the shutter time is 3. b. The App automatically calculates the number of images can be taken after saving the setting above.

⑧ Preview the delay setting path, while the stabilizer will move according to the set trajectory, but will not take photos. After preview, you can start the time-lapse photography

25

Joystick

1.Moza Air Moza Air remote control ；

2.Up/down scrolling: Select the item at the menu.

3.Left scrolling: Go back to the upper menu.

4.Right scrolling: Go to the next menu or save the changes.

SPEED Button

1.Quick press to select the speed. （ L,M,H ） .

2.Long press to select between Focusing speed and

Moza Air moving speed.

OPTIONS Button

1.Quick press to switch the follow mode (Default yaw-follow, yaw-pitch follow, roll follow and all-lock).

2.Long press to enter the setting menu.

ON/OFF Button

1.Long press the button to power on/off the Moza Air.

2.Quick press to start camera REC, quick press again to stop camera REC.

Roller

1.Use the Roller knob to control camera focus by rolling the knob left to right. Available for Canon camera with USM lens.

2.Double quick press the roller to re-center the Moza Air.

USB Port

1.Charging the thumb controller.

2.Firmware update.

26


OLED Display Instruction

Connection Moza Air Battery Controller Battery

Recording Status

Control Speed Focus Speed

Follow Mode

Main Menu

Long press Option Button to enter the main menu.

Functions

Wireless Thumb Controller

27 28


OLED Display Instruction

Connection Moza Air Battery Controller Battery

Recording Status

Control Speed Focus Speed

Follow Mode

Main Menu

Long press Option Button to enter the main menu.

Functions


27 28


Pair

1. Choose Pair and move the joystick rightwards to enter the secondary menu.

2. Move the joystick downwards to choose the YES option

3. Move the joystick rightwards again to enter the Pairing mode. The interface of

Pairing will appear. Then turn on Moza Air, the screen of the thumb controller shows OK in 5 seconds.


Camera

More information please refer to the page 9 and learn the compatible camera brands which can trigger the picture taking or video shooting on the Moza Air.

Note:

If the OK confirm is not shown on and you get a ‘ Pair ERR ’ , please power off the

Moza Air then turn it on and try it again. If the pair still fails, please check and update the firmware of your gimble and wireless controller then try to pair them again (Keep both device firmware the most up to date).

Save:

Save the current setting at the Moza wireless thumb controller or it will go back to the last saving parameter.

Tips: Select “ OTHER ” profile and plug the shutter cable to the camera ， double click on the power button on the handgrip to trigger the camera photo taking, or the advance time-lapse..

Profile

There are 4 sets of parameters are optional for different camera and lens in different weights. Please begin with profile 4. If you get the vibration with the current profile, select a lower one until the vibration is gone. Or you can try the Auto-Tune, which will tune the parameters automatically one time.

Motor

Turn on or off the motor.

Confirm to save and the OLED display will show “ Set OK ” , if it shows “ Set ERR ” then try the saving again. Follow

“ Follow Enable: is set to enable or disable the follow function at the current

Adjustment Arm.

29 30


Pair

1.

Choose Pair and move the joystick rightwards to enter the secondary menu.

2.

Move the joystick downwards to choose the YES option

3.

Move the joystick rightwards again to enter the Pairing mode. The interface of

Pairing will appear. Then turn on Moza Air, the screen of the thumb controller shows OK in 5 seconds.


Camera

More information please refer to the page 9 and learn the compatible camera brands which can trigger the picture taking or video shooting on the Moza Air.

Note:

If the OK confirm is not shown on and you get a ‘ Pair ERR ’ , please power off the

Moza Air then turn it on and try it again. If the pair still fails, please check and update the firmware of your gimble and wireless controller then try to pair them again (Keep both device firmware the most up to date).

Save:

Save the current setting at the Moza wireless thumb controller or it will go back to the last saving parameter.

Tips: Select “ OTHER ” profile and plug the shutter cable to the camera ， double click on the power button on the handgrip to trigger the camera photo taking, or the advance time-lapse..

Profile

There are 4 sets of parameters are optional for different camera and lens in different weights. Please begin with profile 4. If you get the vibration with the current profile, select a lower one until the vibration is gone. Or you can try the Auto-Tune, which will tune the parameters automatically one time.

Motor

Turn on or off the motor.

Confirm to save and the OLED display will show “ Set OK ” , if it shows “ Set ERR ” then try the saving again.

Follow

“ Follow Enable: is set to enable or disable the follow function at the current

Adjustment Arm.

29 30


“ Follow Speed ” is set for the movement speed along with the operator. Five level profiles are available.


Habits

Set the habits for joystick and display.

Mode

You can set the joystick to 4 direction or 8 direction.

Power

Motor torque adjustment, please keep the original parameter.

Calibrate

Gyroscope and Accelerometer Calibration. More information please refer to page

13 or page 23.

Remap the joystick

Up Down → PIT: Up or down to control the Pitch Adjustment Arm

Up Down → ROL: Up or down to control the Roll Adjustment Arm

Up Down → YAW: Up or down to control the Yaw Adjustment Arm

Left Right → PIT: Left or Right to control the Pitch Adjustment Arm

Left Right → ROL: Left or Right to control the Roll Adjustment Arm

Left Right → YAW: Left or Right to control the Yaw Adjustment Arm

Reverse

Reverse the current joystick direction.

Custom

Customize turn off the display after 1-60 minutes.

Always On

Display will always on. Motion Control

Please refer to page 33 to learn how to set the Motion Control

Manual Position

Enable the Manual Position then use your hand to move the lens towards to the angles you need, then let go and it will stay on the current position.

Version

View the current firmware version of the wireless thumb controller.

Tips ： Disable the follow mode on the current Adjustment Arm before enable the

Manual Position.

31 32


“ Follow Speed ” is set for the movement speed along with the operator. Five level profiles are available.


Habits

Set the habits for joystick and display.

Mode

You can set the joystick to 4 direction or 8 direction.

Power

Motor torque adjustment, please keep the original parameter.

Calibrate

Gyroscope and Accelerometer Calibration. More information please refer to page

13 or page 23.

Remap the joystick

Up Down → PIT: Up or down to control the Pitch Adjustment Arm

Up Down → ROL: Up or down to control the Roll Adjustment Arm

Up Down → YAW: Up or down to control the Yaw Adjustment Arm

Left Right → PIT: Left or Right to control the Pitch Adjustment Arm

Left Right → ROL: Left or Right to control the Roll Adjustment Arm

Left Right → YAW: Left or Right to control the Yaw Adjustment Arm

Reverse

Reverse the current joystick direction.

Custom

Customize turn off the display after 1-60 minutes.

Always On

Display will always on. Motion Control

Please refer to page 33 to learn how to set the Motion Control

Manual Position

Enable the Manual Position then use your hand to move the lens towards to the angles you need, then let go and it will stay on the current position.

Version

View the current firmware version of the wireless thumb controller.

Tips ： Disable the follow mode on the current Adjustment Arm before enable the

Manual Position.

31 32


MOZA Mimic Motion Control Tutorial Guide

Notice ： Only apply to version D of the MOZA thumb controller

Mimic Motion Control

1. Pair Moza Air with the thumb controller (which has been paired after manufacture).

2. Turn Moza Air on.

3. Calibration should be done when you use this function for the first time or drifts and unstable situations occur, please refer to mimic control calibration.

4. Long press “OPTIONS” to enter the menu. Select “Motion Control” >> “Start” to enter the mimic control mode.

Mimic Motion Control attitudes become consistent.

7. Move the joystick leftwards to exit the mimic control mode.

Select “ ON ” to enable the motion control on the current Adjustment Arm . Select

“ OFF ” to disable this function.

Mimic control calibration

1. Place the thumb controller and Moza Air well like figure 1

2. Long press “OPTIONS” to enter the menu. Select “Motion Control” >>

“Motion Calib” to start calibration.

5. The screen displays parameters of each axis after entering the mimic control mode. If “Error” pops out on the screen, please check the thumb controller code or try it again.

6. If the attitude of Moza Air is inconsistent with the thumb controller in mimic control mode, long press “SPEED” button to pause mimic control, turn the thumb controller to a desired position, then release “SPEED” to restart control when both

33 34

3. Keep the thumb controller still, until the screen displays “Success” or “Fail” .

If it shows “Fail” please make sure wireless thumb controller is keeping still or if it is a

D version controller.


MOZA Mimic Motion Control Tutorial Guide

Mimic Motion Control attitudes become consistent.

7. Move the joystick leftwards to exit the mimic control mode.

Notice ： Only apply to version D of the MOZA thumb controller

Mimic Motion Control

1. Pair Moza Air with the thumb controller (which has been paired after manufacture).

2. Turn Moza Air on.

3. Calibration should be done when you use this function for the first time or drifts and unstable situations occur, please refer to mimic control calibration.

4. Long press “OPTIONS” to enter the menu. Select “Motion Control” >> “Start” to enter the mimic control mode.

Select “ ON ” to enable the motion control on the current Adjustment Arm . Select

“ OFF ” to disable this function.

Mimic

C

ontrol

C

alibration

1. Place the thumb controller and Moza Air well like figure 1

2. Long press “OPTIONS” to enter the menu. Select “Motion Control” >>

“Motion Calib” to start calibration.

5. The screen displays parameters of each axis after entering the mimic control mode. If “Error” pops out on the screen, please check the thumb controller code or try it again.

6. If the attitude of Moza Air is inconsistent with the thumb controller in mimic control mode, long press “SPEED” button to pause mimic control, turn the thumb controller to a desired position, then release “SPEED” to restart control when both

33 34

3. Keep the thumb controller still, until the screen displays “Success” or “Fail” .

If it shows “Fail” please make sure wireless thumb controller is keeping still or if it is a

D version controller.

Specifications

Weight

Dimensions

Max Payload

Till Rotation Range

Roll Rotation Range

Yaw Rotation Range

Working Voltage

Dynamic Current

Static Current

Battery Life

Bluetooth

Valid range

USB Input

Type

Capacity

Output Voltage

Output Current

Input Voltage

Output Voltage

Output Current

Charging Time

Weight

Battery Capacity

Battery Voltage

Working Current

Rest Current

Standby Time

Wireless Type

Control Range

Charging Voltage

Charging Time

Moza Air

1055g (without battery)

90*88*294mm

3200g

360°

360°

360°

9.8-12.6V

300mA

100mA

≤ 12hrs

Bluetooth 4.0

5m

Micro USB 2.0

Battery

Li-ion

2000mAh

4.2V(max)

6A (max)

Charger

5V DC

4.2V

500mA X4

4hrs


100g

600mAh

3.7V

50mA

10mA

24h

2.4G

50M

5V

2h


35 36

Warranty

Warranty

1.

Questions, Support, Service and Warranty contact [email protected].

2.

All shipment must be approved by the Technical Support before shipment.

Consumers are responsible for shipping costs. Technical Support will examine and identify the problem and responsibility; If the issue or issues are a manufacturing defect Gudsen will cover all testing costs, material costs, labor costs, and return shipping.

3.

If the product is deemed not to be covered by the warranty. We will contact the customer describing the repairs and costs before repairing the stabilizer.

Customer is responsible for return shipping.

4.

Consumers can contact [email protected] for more details of maintenance process.

5.

Moza Air is covered by 12 months warranty. The limited warranty does not apply to accessories or consumable parts. For more details on the warranty policy www.gudsen.com.

Specifications

Weight

Dimensions

Max Payload

Till Rotation Range

Roll Rotation Range

Yaw Rotation Range

Working Voltage

Dynamic Current

Static Current

Battery Life

Bluetooth

Valid range

USB Input

Type

Capacity

Output Voltage

Output Current

Input Voltage

Output Voltage

Output Current

Charging Time

Weight

Battery Capacity

Battery Voltage

Working Current

Rest Current

Standby Time

Wireless Type

Control Range

Charging Voltage

Charging Time

Moza Air

1055g (without battery)

90*88*294mm

3200g

360°

360°

360°

9.8-12.6V

300mA

100mA

≤ 12hrs

Bluetooth 4.0

5m

Micro USB 2.0

Battery

Li-ion

2000mAh

4.2V(max)

6A (max)

Charger

5V DC

4.2V

500mA X4

4hrs


100g

600mAh

3.7V

50mA

10mA

24h

2.4G

50M

5V

2h


35 36

Warranty

Warranty

1. Questions, Support, Service and Warranty contact [email protected].

2. All shipment must be approved by the Technical Support before shipment.

Consumers are responsible for shipping costs. Technical Support will examine and identify the problem and responsibility; If the issue or issues are a manufacturing defect Gudsen will cover all testing costs, material costs, labor costs, and return shipping.

3. If the product is deemed not to be covered by the warranty. We will contact the customer describing the repairs and costs before repairing the stabilizer.

Customer is responsible for return shipping.

4. Consumers can contact [email protected] for more details of maintenance process.

5. Moza Air is covered by 12 months warranty. The limited warranty does not apply to accessories or consumable parts. For more details on the warranty policy www.gudsen.com.


FAQ & Customer Support

1.How to setup Moza Air?

Take out the Moza Air and battery from the box ， make sure the battery is full charge ； Balance the camera until the camera lens can keep horizontal still whatever it is towards up or down, left or right, then you can turn it on and give it a try.

2.What cause a vibration problem?

The payload profile is not match to the real weight of your setup will cause the vibration problem. You can try the Auto-Tune at the Mobile App to fix this problem. For some special camera setup the Auto-Tune couldn't select the best profile for your Moza gimbal, please select the profile manually.

3.Quick review of Joystick and Power Button control

Joystick ： One quick press: Yaw-follow mode. Double quick press: Tilt-yaw follow mode. Triple quick press: All-lock mode. Four times quick press: Roll-follow mode. Long press/quick press again: Enable sleeping mode/ wake up.

Power Button ： One quick press: Start/Stop recording. Double quick press: Phototaking. Triple quick press: auto-center. Four times press: Enable roll control. Long press:

Power on/off the Moza Air.

4.How to set the camera recording function on Moza Air?

（ 1 ） Plug in the camera control cable.

（ 2 ）（ Sony--ALPHA ，，

Panasonic--GH ）

（ 3 ） Click on the Power Button on Moza or wireless thumb controller to start.

5.How to connect to the Mobile App?

Download (iOS: Search MOZA at App store; Android: Search MOZA at Google

Play)Turn on the phone Bluetooth （ Android need to give the phone full access ） ,run the

App and power on the Moza Air, Click on the “Search” button to locate your Moza device.

Customer Support

Please send your inquiry to www.gudsen.com for the technical assistant.

37 38

Indexes

Indexes

1.

G i m b a l B a l a n c e ············································ 0 7

2.

D u a l h a n d s e t u p ··········································· 0 9

3.

P r e s s c o m m e n d L o g i c ···································· 1 0

4.

T h u m b c o n t r o l l e r f u n c t i o n ······················ 2 7

5 .

P a r a m e t e r s e t t i n g & A u t o - T u n e

5 . 1 A P P S e l e c t p r o f i l e · · · · · · · · · · · · · · · · · · · · · · · · · · 2 1 & · 2 2

5 . 2 T h u m b c o n t r o l l e r · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 3 0

6 .

C a m e r a C o n t r o l F e a t u r e

6 . 1 C a m e r a c o n t r o l c a b l e ····································· 0 9

6 . 2 A P P ··································································································· 2 0

6 . 3 T h u m b c o n t r o l l e r ··························································· 3 0

7 .

R o l l M o t o r C o n t r o l

7 . 1 J o y s t i c k c o n t r o l ······························································· 1 0

7 . 2 A P P c o n t r o l ············································································· 2 0

7 . 3 T h u m b c o n t r o l l e r c o n t r o l ····························· 3 2

8 .

F o l l o w M o d e s e l e c t i o n

8 . 1 J o s t i c k ····································································· 1 0

8 . 2 A P P ······················································································· 2 1

8 . 3 T h u m b c o n t r o l l e r ··············································· 2 6

9 .

M a n u a l p o s i t i o n S w i t c h

9 . 1 A P P ··································································································· 2 2

9 . 2 T h u m b c o n t r o l l e r ·························································· 3 1

10.

A d v a n c e d T i m e - L a p s e ············································································· 2 4

11.

M o t i o n C o n t r o l ················································································· 3 3

12.

G i m b a l F i r m w a r e u p d a t e ···················································· 1 1

13.

T h u m b c o n t r o l l e r F i r m w a r e u p d a t e ·············· 1 6

14.

C a l i b r a t i o n ······································································· 1 3


FAQ & Customer Support

1.How to setup Moza Air?

Take out the Moza Air and battery from the box ， make sure the battery is full charge ； Balance the camera until the camera lens can keep horizontal still whatever it is towards up or down, left or right, then you can turn it on and give it a try.

2.What cause a vibration problem?

The payload profile is not match to the real weight of your setup will cause the vibration problem. You can try the Auto-Tune at the Mobile App to fix this problem. For some special camera setup the Auto-Tune couldn't select the best profile for your Moza gimbal, please select the profile manually.

3.Quick review of Joystick and Power Button control

Joystick ： One quick press: Yaw-follow mode. Double quick press: Tilt-yaw follow mode. Triple quick press: All-lock mode. Four times quick press: Roll-follow mode. Long press/quick press again: Enable sleeping mode/ wake up.

Power Button ： One quick press: Start/Stop recording. Double quick press: Phototaking. Triple quick press: auto-center. Four times press: Enable roll control. Long press:

Power on/off the Moza Air.

4.How to set the camera recording function on Moza Air?

（ 1 ） Plug in the camera control cable.

（ 2 ）（ Sony--ALPHA ，，

Panasonic--GH ）

（ 3 ） Click on the Power Button on Moza or wireless thumb controller to start.

5.How to connect to the Mobile App?

Download (iOS: Search MOZA at App store; Android: Search MOZA at Google

Play)Turn on the phone Bluetooth （ Android need to give the phone full access ） ,run the

App and power on the Moza Air, Click on the “Search” button to locate your Moza device.

Customer Support

Please send your inquiry to www.gudsen.com for the technical assistant.

37 38

Indexes

Indexes

1. Gimbal Balance ··········· ·································· ································· 0 7

2. Dual H and S etup ··························· ·········································· ··· 0 9

3. Press C ommend Logic ············ ············································ ······ 1 0

4. Thumb C ontroller F unction ···················· ···························· ·· 2 7

5 .

Parameter Se ting & Auto-Tune

5 .

1 APP S elect P rofile ····················································· 2 1 & · 2 2

5 .

2 T h u mb C ontroller ·································································· 3 0

6 .

Camera Control Feature

6 . 1 Camera C ontrol C able ·············· ················ ·· ········ ···················· 0 9

6 . 2 APP ································································································· 2 0

6 .

3 Thumb C ontroller ············································ · ······ ·············· ···· 3 0

7 .

Roll Motor Control

7 .

1 Joystick C ontrol ····························· ······· ······· ···· ··························· 1 0

7 .

2 APP C ontrol ··············· ······· ······································· ···· ····················· 2 0

7 .

3 Thumb C ontroller C ontrol ······················ ····················· ······· 3 2

8 .

Follow Mode S election

8 .

1 Jostick ··············· ·· ······················· ··· ······························· 1 0

8 .

2 APP ············ ····· ·········································· ···· ································· 2 1

8 .

3 Thumb C ontroller ··································· ························ ·········· 2 6

9 .

Manual P osition Switch

9 .

1 APP ································································································· 2 2

9 .

2 Thumb C ontroller ······················· ·········· ··································· 3 1

10. Advanced Time Lapse ··································································· 2 4

11. Motion Control ················································································· 3 3

12. Gimbal Firmware U pdate ···························· ·················· ····················· 1 1

13. Thumb C ontroller Firmware U pdate ·· ··························· ······ 1 6

14. Calibration ················· ···················· ······················································ 1 3

www.gudsen.com

MOZA Air

User Manual

No results