Fossil DIGITAL MLL-020 Manual

Digital MLL-020

B C

A D

Normal Time Display

1. Press A to change to chronograph mode.

2. Press B for EL.

3. Press and hold C to display date.

4. Press and hold C and then push D to toggle month/date format.

5. Press and hold D to display alarm time.

6. Press and hold D and then push A to toggle 12/24-hour format.

Note: At any point in any setting mode, press A to exit setting mode.

Time and Calendar Setting

1. In normal time display, press and hold A for 3 seconds, then press A again; Tuesday flag and seconds digits will begin flashing.

2. Press D to set seconds to zero.

3. Press C to advance to minute.

4. Press D to advance digit, press and hold D for fast advance.

5. Press C to advance to next setting value.

6. Setting sequence is: seconds, minute, hour, month, date, weekday.

7. Press A to exit setting mode.

Alarm Mode

1. In normal time display, press and hold D and then push C to toggle alarm/chime on/off.

2. Alarm will sound at preset time for 30 seconds; press D to silence alarm.

3. To test alarm, press and hold C and D simultaneously. Alarm will beep.

Alarm Setting

1. In normal time display, press and hold A for 3 seconds; Monday flag and hour will begin flashing.

2. Press D to advance digit; press and hold D for fast advance.

3. Press C to set and advance to minute.

4. Press D to advance digit; press and hold D for fast advance.

5. Press A to exit setting mode.

Chronograph Mode

1. Press A to change to chronograph mode.

2. Press C to start/stop the chronograph.

3. Press D to reset to zero.

Split Time

1. Press D while the chronograph is running for split time.

2. Press D again to return to chronograph.

3. Repeat steps 1 & 2 to measure multiple split times.

4. Press C to finalize timing.

5. Press D to reset to zero.