Asko D5426XLS, D5436XLS, D5526XLFI, D5636XLHS, D5636XLTH Design Manual
Below you will find brief information for Dishwashers D5426 XLS, Dishwashers D5436 XLS, Dishwashers D5636 XXLSHI, Dishwashers D5636 XLHS/TH, Dishwashers D5636 XXLHS/TH, Dishwashers D5656 XXLHS/TH, Dishwashers D5526 XLFI, Dishwashers D5526 XXLFI, Dishwashers D5536 XLFI.
Advertisement
Advertisement
Asko Design Guide
REVISED 3/2016
Contents
3 Asko Dishwashers
4 Specifications
8
Custom Panel
10
Asko Washers | Dryers
12
Specifications
19
Warranty
Features and specifications are subject to change at any time without notice. Visit askona.com/specs for the most up-to-date information.
IMPORTANT NOTE: Throughout this guide, dimensions may vary by ± 1 /
8
" (3) . Dimensions in parentheses are millimeters unless otherwise specified.
ASKO DISHWASHERS
Asko Dishwashers
At Asko, we design and manufacture premium quality dishwashers with a special Scandinavian touch for design and function. Panel ready models accept a custom panel and handle. Tubular and pro handle models match Sub-Zero and
Wolf products. Our products meet the highest demands in performance and durability, as well as environmental awareness. XL models are ADA height compliant.
DISHWASHER MODELS
INTEGRATED HANDLE
D5426XLS D5436XLS
TUBULAR | PRO HANDLE
D5636XXLSHI
D5636XLHS/TH
D5636XXLHS/TH
D5656XXLHS/TH
D5636XLHS/PH
D5636XXLHS/PH
D5656XXLHS/PH
PANEL READY
D5526XLFI
D5526XXLFI
OUTDOOR
D5536XLFI
D5536XXLFI
D5536XXLFISOF
D5556XXLFI
D5956OUTDOORPH askona.com/specs | 3
ASKO DISHWASHERS
Overall Dimensions
INTEGRATED HANDLE
23 7 / 8 " (606) 22 7 / 8 " (581)
H
4" (102) *
3"
(76)
5 3 / 8 "
(137)
TUBULAR | PRO HANDLE
23 7 / 8 " (606)
2 3 / 8 "
(60)
22 7 / 8 " (581)
H
4" (102) *
3"
(76)
5 3 / 8 "
(137)
OPEN DOOR
24 5 / 8 "
(625)
OPEN DOOR
24 5 / 8 "
(625)
*Dimension will vary with product height.
*Dimension will vary with product height.
HEIGHT
XL Model
XXL Model
32 3 /
4
" (832) * – 34
34" (864) – 35
H
3 /
4
" (883)
3 /
4
" (908)
*Can be reduced to 32 1 /
4
" (819) by removing top trim and lowering side trim.
HEIGHT
XL Model
XXL Model
32 3 /
4
" (832) * – 34
34" (864) – 35
3
3 /
H
/
4
" (883)
4
" (908)
*Can be reduced to 32 1 /
4
" (819) by removing top trim and lowering side trim.
4 | Asko Customer Care 800.222.7820
ASKO DISHWASHERS
Overall Dimensions
PANEL READY
23 9 / 16 " (599) 22 7 / 8 " (581)
H
4" (102) *
3"
(76)
5 3 / 8 "
(137)
OUTDOOR
24 5 / 8 " (625)
2 3 / 8 "
(60)
22 7 / 8 " (581)
H
4" (102) *
3"
(76)
5 3 / 8 "
(137)
OPEN DOOR
24 5 / 8 "
(625)
OPEN DOOR
24 5 / 8 "
(625)
*Dimension will vary with product height.
*Dimension will vary with product height.
HEIGHT
XL Model
XXL Model
*Can be reduced to 32 1 /
4
" (819) .
H
32 3 /
4
" (832) * – 34 3 /
4
" (883)
34" (864) – 35 3 /
4
" (908)
IMPORTANT NOTE: Overall dimensions for panel ready models do not include panels or handles. Dimensions will vary with panel thickness.
HEIGHT
Outdoor Model
H
35" (889) – 35 3 /
4
" (908) askona.com/specs | 5
ASKO DISHWASHERS
Opening Dimensions
DISHWASHERS
34 1 / 2 "
(876)
OPENING
HEIGHT
24" (610)
OPENING
DEPTH
TOP VIEW
W
OPENING WIDTH
SIDE VIEW FRONT VIEW
NOTE: 3 1 / 2 " (89) finished returns will be visible and should be finished to match cabinetry.
OPENING WIDTH
Integrated Handle
Tubular | Pro Handle
Panel Ready
Outdoor
W
24" (610)
24" (610)
23 5 /
8
" (600)
24 7 /
8
" (632)
A minimum 3 1 /
2
" (89) finished return is required on all sides of the opening. Framed cabinets will require additional finished filler material behind the face frame for a proper installation. Refer to the illustration.
Integrated handle models and tubular and pro handle models include top and side trim to accommodate slightly larger or smaller openings. If top and side trim are removed, the opening width should be reduced to 23 5 /
8
" (600) to achieve minimum reveals. Panel ready models do not include trim. Dimensions provide minimum reveals.
For ADA installations and height restricted openings, all
XL models can be installed in a 32 1 /
4
" (819) opening by removing top trim and lowering side trim.
3 / 4 "
(19)
TYPICAL
3 1 / 2 " (89)
FINISHED
RETURN
W
FRAMELESS CABINETRY
3 1 / 2 " (89)
FINISHED
RETURN
FILLER
W
FRAMED CABINETRY
6 | Asko Customer Care 800.222.7820
ASKO DISHWASHERS
Electrical
The electrical supply should be located in an adjacent cabinet. If the supply cannot be located in an adjacent cabinet, it must be located within the shaded area shown in the illustration below. A separate circuit, servicing only this appliance is required.
IMPORTANT NOTE: For the outdoor model, a ground fault circuit interrupter (GFCI) is required to reduce the risk of electrical shock. A GFCI is not recommended for use with other models and may cause interruption of operation.
Installation must comply with all applicable electrical codes.
ELECTRICAL REQUIREMENTS
Electrical Supply
Service
Receptacle
115 VAC, 60 Hz
15 amp
3-prong grounding-type
Plumbing
The water supply and drain should be located in an adjacent cabinet. If they cannot be located in an adjacent cabinet, they must be located within the shaded area shown in the illustration below. The water supply line should be connected to a hot or cold house supply with an easily accessible shut-off valve between the supply and the unit.
Installation must comply with all applicable plumbing codes.
PLUMBING REQUIREMENTS
Water Connection
Pressure
6' (1.8 m) PEX tubing with
3 /
8
" NPT female connection
4.2–140 psi (.3–9.7 bar)
OPENING
WIDTH
AREA EXTENDS 2" (51)
FORWARD ON FLOOR
Electrical supply location.
5 3 / 8 "
(137)
OPENING
WIDTH
5 3 / 8 "
(137)
AREA EXTENDS 2" (51)
FORWARD ON FLOOR
Water supply and drain location.
askona.com/specs | 7
ASKO DISHWASHERS
Custom Panel
PANEL READY
For panel ready models, a custom door panel and handle must be provided. Typical panel dimensions are based on a
23 5 /
8
" (600) opening width and 34 1 /
2
" (876) finished height, with a minimum 4" (102) toe kick and 1 /
8
" (3) reveals. For all other opening widths, the panel should be 1 /
4
" (6) less than the opening to achieve minimum reveals. Panel dimensions must be adjusted accordingly for all other installations. Refer to the chart and illustration below for panel requirements.
Finish all sides of the custom panel. They may be visible when the door is open.
PANEL REQUIREMENTS
DIMENSIONS
Custom Panel (typical)
WEIGHT | THICKNESS
Max Weight (including handle)
Min Thickness
W
23 3 /
8
" (594)
H
30 1 /
8
" (765)
20 lb (9 kg)
3 /
4
" (19)
H
W
Panel dimensions.
8 | Asko Customer Care 800.222.7820
ASKO DISHWASHERS askona.com/specs | 9
10 | Asko Customer Care 800.222.7820
ASKO WASHERS | DRYERS
Asko Washers | Dryers
Asko’s range of washers and dryers reflect 60 years of
Swedish ingenuity and continuous innovation, designed to balance performance and durability with environmental considerations. They provide the best possible washing and drying results, handling your clothes with care. No matter what life throws at you, Asko has the perfect UltraCare system to make short work of your laundry. From the highefficiency family size to the supersized XL washers and dryers, Asko has the right laundry system for any family, large or small.
WASHER MODELS
W6424W
W6424T
W8844XLW
DRYER MODELS
T754W
T754T
T754CW T884XLW T884XLHPW askona.com/specs | 11
ASKO WASHERS | DRYERS
Overall Dimensions
WASHERS
23 1 / 2 " (597)
33 1 / 2 "
(851)
23 7 / 8 " (606)
FRONT VIEW
Model W6424.
23 1 / 2 " (597)
SIDE VIEW
28 3 / 16 " (716)
33 1 / 2 "
(851)
FRONT VIEW
Model W8844XL.
SIDE VIEW
5"
(127)
6 1 / 2 "
(165)
BACK VIEW
5"
(127)
6 1 / 2 "
(165)
OPEN
DOOR
TOP VIEW
13 1 / 4 "
(337)
BACK VIEW
OPEN
DOOR
TOP VIEW
13 1 / 4 "
(337)
12 | Asko Customer Care 800.222.7820
ASKO WASHERS | DRYERS
Overall Dimensions
DRYERS
23 1 / 2 " (597)
33 1 / 2 "
(851)
23 7 / 8 " (606)
FRONT VIEW
Model T754(C).
23 1 / 2 " (597)
33 1 / 2 "
(851)
15 7 / 8 "
(403)
SIDE VIEW
28 3 / 16 "
(716)
29 3 / 8 " (746)
BACK VIEW
4"
(102)
28 3 / 16 "
(716)
20 3 / 8 "
(516)
SIDE VIEW BACK VIEW
4"
(102)
FRONT VIEW
Model T884XL(HP).
OPEN DOOR
TOP VIEW
22 7 / 8 "
(581)
OPEN DOOR
TOP VIEW
22 7 / 8 "
(581) askona.com/specs | 13
ASKO WASHERS | DRYERS
Overall Dimensions
STACKED
23 1 / 2 " (597) 23 7 / 8 " (606)
28 3 / 16 "
(716)
67"
(1702) *
15 7 / 8 "
(403)
BACK VIEW
4"
(102)
5"
(127)
6 1 / 2 "
(165)
13 1 / 4 "
(337)
OPEN DOOR
TOP VIEW
22 7 / 8 "
(581)
*73" (1854) if hidden helper accessory is installed.
FRONT VIEW
Model W6424 | T754(C).
23 1 / 2 " (597)
SIDE VIEW
29 3 / 8 " (746)
67"
(1702) *
20 3 / 8 "
(516)
FRONT VIEW
Model W8844XL | T884XL(HP).
14 | Asko Customer Care 800.222.7820
SIDE VIEW
28 3 / 16 "
(716)
BACK VIEW
4"
(102)
5"
(127)
6 1 / 2 "
(165)
13 1 / 4 "
(337)
OPEN DOOR
TOP VIEW
22 7 / 8 "
(581)
*73" (1854) if hidden helper accessory is installed.
ASKO WASHERS | DRYERS
Overall Dimensions
PLATFORM
23 1 / 2 " (597)
12"
(305)
21 1 / 4 " (540)
21 1 / 4 "
(540)
NOTE: For W6424 and T754(C) only.
Washer | dryer platform.
askona.com/specs | 15
ASKO WASHERS | DRYERS
Built In Opening
SINGLE INSTALLATION SIDE BY SIDE INSTALLATION
D
OPENING
DEPTH
TOP VIEW TOP VIEW TOP VIEW
34 1 / 2 "
(876)
OPENING
HEIGHT
24 1 / 2 " (622)
OPENING WIDTH
SIDE VIEW
NOTE: Dimensions provide minimum reveals.
OPENING DEPTH
W6424
W8844XL
T754(C)
T884XL(HP)
34 1 / 2 "
(876)
OPENING
HEIGHT
SIDE VIEW
34 1 / 2 "
(876)
OPENING
HEIGHT
48 1 / 2 " (1232) 24 1 / 2 " (622)
FRONT VIEW FRONT VIEW
D
23 7 /
8
" (606)
29 3 /
8
" (746)
23 7 /
8
" (606)
29 3 /
8
" (746)
OPENING DEPTH
W6424 and T754(C)
W8844XL and T884XL(HP)
D
23 7 /
8
" (606)
29 3 /
8
" (746)
16 | Asko Customer Care 800.222.7820
ASKO WASHERS | DRYERS
Built In Opening
STACKED INSTALLATION
D
OPENING
DEPTH
TOP VIEW
Planning Information
If a washer or dryer is installed in a closet or an enclosure with a door, the door must be vented, louvered or left open during operation. Insufficient ventilation will significantly reduce performance.
68"
(1727)
OPENING
HEIGHT
24 1 / 2 " (622)
OPENING WIDTH
SIDE VIEW
NOTE: Dimensions provide minimum reveals.
OPENING DEPTH
W6424 and T754(C)
W8844XL and T884XL(HP)
FRONT VIEW
D
23 7 /
8
" (606)
29 3 /
8
" (746) askona.com/specs | 17
ASKO WASHERS | DRYERS
Electrical
A separate electrical service is not required for the washer.
The receptacle for the washer is located on the back of the dryer.
If the washer is being installed separate from the dryer, refer to the electrical requirements below. The electrical location must be placed within reach of the power cord.
Installation must comply with all applicable electrical codes.
ELECTRICAL REQUIREMENTS
WASHER
Electrical Supply
Service
Receptacle
Power Cord
DRYER
Electrical Supply
Service grounded, 220 VAC, 60 Hz
15 amp
NEMA 6–20R grounding-type
6' (1.8 m) grounded, 240/208 VAC, 60 Hz
30 amp
Plumbing
Installation must comply with all applicable plumbing codes.
PLUMBING REQUIREMENTS
Water Connection
Pressure
1 /
2
" ID min (cold only)
15–146 psi (1–10 bar)
18 | Asko Customer Care 800.222.7820
Asko Residential Limited Warranty
RESIDENTIAL APPLIANCES
ASKO Distribution North America, LLC. (“ASKO”) warrants to the original purchaser (the “ASKO Customer”) of the ASKO product
(the “ASKO Product”), who purchased the ASKO Product from a distributor, dealer, manufacturer’s representative or other seller who has been authorized by ASKO, that this ASKO Product is free of defects in materials and/or workmanship, subject to the terms and conditions set forth herein. This Limited Warranty covers parts and labor, except as set forth in this Limited Warranty. Service must be provided by an authorized ASKO service company. YOUR SOLE AND EXCLUSIVE REMEDY UNDER THIS LIMITED WARRANTY SHALL
BE PRODUCT REPAIR AS PROVIDED HEREIN. This Limited Warranty is valid only when the ASKO Product is used in the country in which it was purchased. Proof of original purchase date is required to obtain service under this Limited Warranty.
Residential ASKO Products Used Exclusively for Household/Personal Purposes:
Two (2) Years Limited Warranty—Any warranty service claims for residential ASKO Products must be filed with ASKO within two (2) years from date of purchase. Service will be provided during normal business hours.
Residential ASKO Products Not Used Exclusively for Household/Personal Purposes or used Commercially or used in Marine, Mobile or Aeronautical Applications:
One (1) Year Limited Warranty—Any warranty service claims for ASKO Products not used exclusively for household and personal use, or used commercially or used in marine, mobile, or aeronautical applications must be filed with ASKO within one (1) year from date of purchase. Service will be provided during normal business hours.
ITEMS EXCLUDED FROM WARRANTY
This Limited Warranty does not cover:
1) Replacement parts or repair labor if the ASKO Product is used in a manner that is inconsistent with published user or operator instructions and/or installation instructions.
2) Service calls to correct the installation of the ASKO Product, to instruct you on how to use the ASKO Product, to replace or repair house fuses, or to correct house wiring or plumbing.
3) Consumable items and parts, such as filters.
4) Damage resulting from accident, alteration, misuse, abuse, negligence, fire, flood, acts of God, improper use, improper installation, installation not in accordance with electrical or plumbing codes, or use of products not approved by ASKO, as well as any attempted repair by other than authorized ASKO service companies.
5) Cosmetic damage, including scratches, dents, chips or other damage to the finish of the ASKO Product, unless such damage results from defects in materials or workmanship and is reported to ASKO within 5 days from date of purchase.
6) Pickup and delivery. The ASKO Product is intended to be repaired in your home.
7) Repairs to parts or systems resulting from unauthorized modifications made to the ASKO Product.
8) Expenses for travel and transportation for product service if the ASKO Product is located in a remote area where service by an authorized ASKO service company is not available.
9) The removal and reinstallation of the ASKO Product if it is installed in an inaccessible location or is not installed in accordance with
ASKO’s published installation instructions.
10) Replacement parts or repair labor on ASKO Products with original model/serial numbers that have been removed, altered or cannot be easily determined.
DISCLAIMER
YOUR SOLE AND EXCLUSIVE REMEDY UNDER THIS LIMITED WARRANTY SHALL BE PRODUCT REPAIR AS PROVIDED HEREIN.
EXPRESSLY DISCLAIMED ARE ALL OTHER EXPRESS AND IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Some jurisdictions do not allow exclusion or limitations regarding warranty rights. This Limited Warranty gives you specific legal rights and you may have other rights that vary from jurisdiction to jurisdiction. Attempted repair by any person other than an authorized ASKO service company will void this Limited Warranty.
LIMITATION OF LIABILITY
IN NO EVENT SHALL ASKO OR THE MANUFACTURER AND THEIR RESPECTIVE PARENTS, SUBSIDIARIES AND AFFILIATES BE
LIABLE FOR CONSEQUENTIAL, INCIDENTAL, EXEMPLARY, PUNITIVE OR SPECIAL DAMAGES. IN NO EVENT SHALL ASKO OR THE
MANUFACTURER AND THEIR RESPECTIVE PARENTS, SUBSIDIARIES AND AFFILIATES BE LIABLE FOR DAMAGES OTHER THAN
ACTUAL DAMAGES AND IN NO EVENT FOR DAMAGES IN EXCESS OF THE PRICE PAID FOR THE ASKO PRODUCT AS TO WHICH
A CLAIM IS MADE. Some jurisdictions do not allow the exclusion or limitation of incidental, consequential or other damages, so these limitations and exclusions may not apply to you. This Limited Warranty gives you specific legal rights. You also may have other rights that vary from jurisdiction to jurisdiction.
TROUBLESHOOTING AND ASKO CUSTOMER CARE
If you think you need repair service, first see the “Troubleshooting” section of the Use & Care Guide. If you are unable to resolve the problem after checking “Troubleshooting,” then additional help can be obtained by calling ASKO Customer Care at 1-800-898-1879.
Read the “Troubleshooting” chapter before contacting the Customer Care Center. Make a note of the details on the rating plate positioned on the right inside the dishwasher. Make a note of the (1) service number, (2) item number and (3) serial number.
SERVICE AFTER EXPIRATION OF LIMITED WARRANTY
For information about obtaining parts and labor after expiration of this Limited Warranty or arising outside the scope of this Limited
Warranty, please contact ASKO Customer Care at 1-800-898-1879. After your purchase and prior to first use of the ASKO Product, register your ASKO Product with ASKO by utilizing the address information below. Should you need further assistance as well, contact us at the address information below:
ASKO Distribution North America, LLC Customer Care Center PO Box 44848 MADISON WI 53744 1-800-898-1879 www.askona.com
ASKO, INC. P.O. BOX 44848 MADISON, WI 53744 ASKONA.COM 800.222.7820
Download
Advertisement
Key features
Scandinavian design
Panel ready models
Tubular and pro handles
Highest performance
Durability
Environmental awareness
XL models ADA height compliant
UltraCare system
High-efficiency family size
Supersized XL washers and dryers
Frequently asked questions
XL models are ADA height compliant, while XXL models have a larger capacity and may be reduced to 321/4" (819) by removing top trim and lowering side trim.
A custom door panel and handle must be provided for panel ready models. Typical panel dimensions are based on a 23 5/8" (600) opening width and 34 1/2" (876) finished height, with a minimum 4" (102) toe kick and 1/8" (3) reveals. Panel dimensions must be adjusted accordingly for all other installations.
A separate circuit, servicing only this appliance is required. The electrical supply should be located in an adjacent cabinet. If the supply cannot be located in an adjacent cabinet, it must be located within the shaded area shown in the illustration below.