SETUP

ETERNUS JX40 SAS

2.5" HDD

1

ETERNUS JX40 Kit

This Poster

SETUP

S

HIPMENT

C

ONTENTS

2

Rackmount Kit

Rackmount Kit

Controller Enclosure

Flange Cover

2 Power Cords

Safety Manual

3

Documentation

Operating Manual

4

Rackmount Kit Installation

I

NSTALLATION

Take note on the ETERNUS JX40 Operating Manual on the supplied Documentation CD.

5

Rack Installation

For details see the

ETERNUS JX40

Operating Manual.

Weight: max. 33.5 kg

10601152755

SETUP

ETERNUS JX40 SAS

2.5" HDD

C

ABLING AND

I

NITIAL

C

ONFIGURATION

6

ETERNUS JX40 Ports

SAS Ports:

OUT IN

Expander Unit 0 Expander Unit 1 (option)

*: 4 FC ports per controller module with ETERNUS DX90 model

7

Enclosure Connection

(max. 3 ETERNUS JX40 in series)

9

Initial Configuration

More installatlation and configuration information can be found in the ETERNUS JX40 Operating Manual and the ServerView RAID Manager User Manual .

8

Data Host SAS Connection

ETERNUS JX40

(max. 3 per RAID controller PHY port)

ETERNUS JX40

(max. 3 per RAID controller PHY port)

Data Host with Dual-PHY-Port

RAID Controller

Install the RAID controller and connect the ETERNUS JX40.

Enter

CTRL+H

during boot to start the WebBIOS Configuration.*

Create physical arrays and logical drives meeting your requirements.*

On the host, install the appropriate driver for the RAID controller.**

On the host, install the ServerView RAID Manager Software.

Start the ServerView RAID Manager via Start/Programs/...

Install a certificate.

From a system in the network, start a browser, connect to the host with https:// <name_or_ip> :3173 and log in as administrator with your password for the host.

Create/change logical drives, volumes etc. meeting your requirements.

Test the connectivity.

*: steps you can omit if you do not plan to boot from the ETERNUS JX40

**: see the “MegaRAID® SAS Device Driver Installation User’s Manual” you can

also find using the URL below

Download the most recent product documentation from http://ts.fujitsu.com/support/manuals.html

Copyright (c) 2010- Fujitsu Technology Solutions GmbH. All rights reserved. No part of this publication may be reproduced, stored electromechanical, chemical, optical, or otherwise - without prior explicit written permission of Fujitsu. ETERNUS and the Fujitsu logo are trademarks or registered trademarks of Fujitsu. All other trademarks and registered trademarks are proprietary to their respective owners. The material in this document is for information only and is subject to change without notice. While reasonable efforts have been made in the preparation of this document to assure its accuracy,

Fujitsu assumes no liability resulting from errors or omissions in this document, or from the use of the information contained herein. Fujitsu reserves the right to make changes in the product design without reservation and without notification to its users.

Edition March 2010

(Version 1, 2010-03-01)