Fujitsu LAN Switch is a robust networking device designed for various applications. This manual provides comprehensive information on its features and configuration options, enabling you to optimize network performance and security. The switch supports advanced features such as Virtual Routing and Forwarding (VRF), Virtual Local Area Networks (VLAN), and Quality of Service (QoS), making it suitable for demanding environments.
Advertisement
Advertisement
FUJITSU PSWITCH 2048T
FUJITSU PSWITCH 2048P
FUJITSU PSWITCH 4032P
Network Management
CA92344-1883-02
December 2018
Message Collection
FUJITSU PSWITCH
The List of syslog messages ......................................................................7
DYNAMIC_ARP_INSPECTION .................................................................... 472
2 December/2018
FUJITSU PSWITCH Message Collection
OUTBOUND_TELNET ................................................................................ 707
Provider Backbone Bridge ...................................................................... 735
December/2018 3
Message Collection FUJITSU PSWITCH
4 December/2018
FUJITSU PSWITCH
Message Collection
The system logs events with severity code, timestamp, and other information.
Many of those events are also sent as SNMP traps to the SNMP servers defined in the switch.
For example, you can view the event logs after system startup and during operation by the following command.
#show logging buffered
Buffered (In-Memory) Logging : enabled
Buffered Logging Wrapping Behavior : On
Buffered Log Count : 19818
<14> Dec 5 17:55:07 ET-7648BFRA-FOS-1 USER_MGR[emWeb]: user_mgr.c(1865) 30566 %% User Failed to login because of authentication failures
<14> Dec 5 17:55:06 ET-7648BFRA-FOS-1 USER_MGR[emWeb]: user_mgr.c(1865) 30565 %% User Failed to login because of authentication failures
<14> Dec 5 17:54:10 ET-7648BFRA-FOS-1 CLI_WEB[emWeb]: login_sessions.c(180) 30564 %% Serial
Session 0 ended for user admin connected from EIA-232
The SNMP trap events and its statistics is displayed by the following command.
#show logging traplogs
Number of Traps Since Last Reset............... 9
Trap Log Capacity.............................. 1000
Number of Traps Since Log Last Viewed.......... 0
Traps' Upper Limit............................. 0
Log System Up Time Trap
--- ------------------------ -------------------------------------------------
0 Jan 31 23:58:35 2017 Link Up: 0/14
1 Jan 31 23:58:35 2017 Link Up: 0/13
2 Jan 31 23:58:32 2017 Link Down: 0/14
3 Jan 31 23:58:32 2017 Link Down: 0/13
4 Jan 31 23:12:14 2017 Link Up: 0/14
5 Jan 31 23:08:13 2017 Link Up: 0/13
6 Jan 25 04:23:36 2017 Cold Start: Unit: 0
7 Jan 25 04:22:46 2017 Temperature state change alarm: Unit Number: 1
Current: Normal, Previous: None
8 Jan 25 04:22:44 2017 Entity Database: Configuration Changed
The following command displays the current configuration of the logging.
#show logging
Logging Client Local Port : 514
Logging Client Source Interface : (not configured)
CLI Command Logging : disabled
Console Logging : enabled
Console Logging Severity Filter : error
Buffered Logging : enabled
Buffered Logging Severity Filter : info
Persistent Logging : disabled
Persistent Logging Severity Filter : alert
December/2018 5
Message Collection
Syslog Logging : disabled
Log Messages Received : 1991
Log Messages Dropped : 0
Log Messages Relayed : 0
FUJITSU PSWITCH
6 December/2018
FUJITSU PSWITCH
Message Collection
The events logged by the system is called as system log, or ‘syslog’ in short. Each entry of these syslog events is based on the syslog protocol standardized by RFC
3164. The following is the example of the system log message.
<13> Jan 31 12:55:29 ET-7648BRA-FOS-1 TRAPMGR[trapTask]: traputil.c(1007) 9404 %% Link Up: 0/23
The number at the top of the message is the priority value, and is calculated by first multiplying the Facility number by 8 and then adding the numerical value of the Severity. Please refer to the RFC 3164 or RFC5424 for details. Incidentally, the
Severity values are defined there as in the following table. If the priority value is 13, you can see the severity is 5 (Notice) by 13 mod 8.
SEVERITY
Code Severity
0 Emergency
1
2
Alert
Critical
Description
System is unusable. System failure has occurred.
Action must be taken immediately. Unrecoverable failure of a component. System failure likely.
Critical conditions. Recoverable failure of a component that may lead to system failure.
Error conditions. Recoverable failure of a component. 3
4
Error
Warning Warning conditions. Minor failure, e.g. misconfiguration of a component.
5
6
7
Notice
Informational
Debug
Normal but significant conditions.
Informational messages.
Debug-level messages.
Table 2-1: The value of the Severity defined in RFC 5424
You can choose RFC3164 or RFC5424 for the format of timestamp with logging protocol command. If this command is entered with argument ‘1’, the format follows RFC5424.
Following the host name and module name, the file name which generates the message is displayed.
The message body begins following the %% string.
The section is separated into subsections based on the system internal modules,
December/2018 7
Message Collection FUJITSU PSWITCH which output the messages described in the subsection in the alphabetic order, like ‘ARRP’, ‘Auto Discovery’, and so on.
Each of the syslog messages in this section is described in the following format. A bold and underlined message string of the syslog is followed by its severity in italic, message description and several parameter descriptions if any.
Message String
<Message Severity>
Description text of this message.
<parameter #1> Additional description about the first parameter of this
<parameter #2> message.
Additional description about the second parameter of this message.
2.1.1.
ARP
[VRF <VrfName>] IP address conflict on interface
<InterfaceNumber> for IP address <IPAddress>. Conflicting host MAC address is <MacAddress>.
Critical
Detected IP address conflict in certain VRF. Trapped and logged.
<VrfName> Name of Virtual Routing and Forwarding Instance
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<IPAddress>
<MacAddress>
0/1, 0/0/1 ip_address, or, ipv6_address, or hostname
MAC address
[VRF <VrfName>] IP address conflict on interface
<InterfaceNumber> with VRRP-Id <ID>, Master IP address <IPAddress>.
Conflicting host MAC address is <MacAddress>.
8 December/2018
FUJITSU PSWITCH
Critical
Message Collection
Detected IP address conflict in certain VRF and VRRP. Trapped and logged.
<VrfName> Name of Virtual Routing and Forwarding Instance
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<ID>
<IPAddress>
<MacAddress>
ID ip_address, or, ipv6_address, or hostname
MAC address
IP address conflict on interface <InterfaceNumber> for IP address
<IPAddress>. Conflicting host MAC address is <MacAddress>.
Critical
Detected IP address conflict. Trapped and logged.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<IPAddress>
<MacAddress>
0/1, 0/0/1 ip_address, or, ipv6_address, or hostname
MAC address
IP address conflict on interface <InterfaceNumber> with VRRP-Id
<ID> Master IP address <IPAddress>. Conflicting host MAC address is MacAddress.
Critical
Detected IP address conflict in certain VRRP. Trapped and logged.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<ID>
<IPAddress>
ID ip_address, or, ipv6_address, or hostname
ARP_SendARPReq() unexpectedly found existing ARP cache entry for
<IPAddress>.
Error
Unexpected program routine.
<IPAddress> ip_address, or, ipv6_address, or hostname
Failed to add secondary address to ARP interface
<InterfaceNumber>.
December/2018 9
Message Collection
Error
FUJITSU PSWITCH
Failed to add secondary address to an ARP interface.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to bind UNIX socket with fd <SocketFD> for VR Agent to
<FilePath>. Error <ErrorCode>. (<ErrorMessage>)
Error
Failed to bind a socket.
<SocketFD>
<FilePath>
<ErrorCode>
<ErrorMessage>
File descriptor for socket
File path
Error code
Error message
Failed to create UNIX send socket for VR Agent. Error <SocketFD>.
(<ErrorMessage>)
Error
Failed to create a socket.
<SocketFD> File descriptor for socket
<ErrorMessage> Error message
Failed to set send socket for VR Agent to non-blocking. Error
<SocketFD>. (<ErrorMessage>)
Error
Failed to set a socket option.
<SocketFD> File descriptor for socket
<ErrorMessage> Error message
Failed to set the socket send buffer to <SizeValue>. Error
(<ErrorMessage>)
Error
Failed to set a socket option.
<SizeValue> An integer for a specific range or a limit value.
<ErrorMessage> Error message
ARP hash collision. Reducing ARP cache from <SizeValue> to
<SizeValue> entries in <TimeValue> msec.
10 December/2018
FUJITSU PSWITCH
Informational
Message Collection
A message about handling ARP hash collision.
<SizeValue> An integer for a specific range or a limit value.
<TimeValue> Time Value
Error on call to osapiFsWrite routine on config file <FileName>
Informational
Failed to save binary configuration file.
<FileName> Log is created by this file.
Purged old entries. Reduced ARP cache from <SizeValue> to
<SizeValue> entries in <TimeValue> msec.
Informational
Notify the user about purged ARP cache.
<SizeValue> An integer for a specific range or a limit value.
<TimeValue> Time Value
[VRF <VrfName>] Updating MAC address of existing ARP entry for IP
<IPAddress> failed.
Notice
Failed to motify an entry in ARP cache.
<VrfName> Name of Virtual Routing and Forwarding Instance
<IPAddress> ip_address, or, ipv6_address, or hostname
<FunctionName> failed tsk <TaskID> <FileName>:<FileLineNumber>
Notice
Task failed. Dump stack trace and suspend.
<FunctionName> Log is created by this function.
<TaskID> Task ID
<FileName>
<FileLineNumber>
Log is created by this file.
Log is created by this line.
<FunctionName>: Cannot find new ARP table entry for <IPAddress> intf <InterfaceNumber>
December/2018 11
Message Collection
Notice
FUJITSU PSWITCH
Failed to find an element in ARP table.
<FunctionName> Log is created by this function.
<IPAddress> ip_address, or, ipv6_address, or hostname
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<FunctionName>: Could not delete AVL tree semaphore, id=<SemaphoreID>
Notice
Failed to delete a semaphore.
<FunctionName> Log is created by this function.
<SemaphoreID> Semaphore ID
<FunctionName>: Entry for <IPAddress> intf <InterfaceNumber> already exists in ARP table
Notice
The element already exists in ARP table.
<FunctionName> Log is created by this function.
<IPAddress> ip_address, or, ipv6_address, or hostname
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<FunctionName>: Failed to create ARP Callback task
Notice
Failed to create a task.
<FunctionName> Log is created by this function.
<FunctionName>: Failed to create ARP Reissue task
Notice
Failed to create a task.
<FunctionName> Log is created by this function.
<FunctionName>: Failed to create ARP Timer Expire task
12 December/2018
FUJITSU PSWITCH
Notice
Failed to create a task.
<FunctionName> Log is created by this function.
Message Collection
<FunctionName>: Failure adding <IPAddress> in device ARP table
Notice
Failed to add an entry into device ARP table.
<FunctionName> Log is created by this function.
<IPAddress> ip_address, or, ipv6_address, or hostname
<FunctionName>: Failure adding <IPAddress> intf
<InterfaceNumber> to ARP table
Notice
Failed to insert an element into ARP table.
<FunctionName> Log is created by this function.
<IPAddress> ip_address, or, ipv6_address, or hostname
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<FunctionName>: Failure removing <IPAddress> intf
<InterfaceNumber> in device ARP table
Notice
Failed to remove an entry from device ARP table.
<FunctionName> Log is created by this function.
<IPAddress> ip_address, or, ipv6_address, or hostname
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<FunctionName>: Failure stopping ARP entry timers for <IPAddress> intf <InterfaceNumber>
December/2018 13
Message Collection
Notice
FUJITSU PSWITCH
Failed to stop ARP entry timer.
<FunctionName> Log is created by this function.
<IPAddress> ip_address, or, ipv6_address, or hostname
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<FunctionName>: Failure to add <IPAddress> intf <InterfaceNumber> to ARP age list
Notice
Failed to add an entry to ARP age list.
<FunctionName> Log is created by this function.
<IPAddress> ip_address, or, ipv6_address, or hostname
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<FunctionName>: Failure to remove <IPAddress> from ARP age list
Notice
Failed to remove an entry from ARP age list.
<FunctionName> Log is created by this function.
<IPAddress> ip_address, or, ipv6_address, or hostname
<FunctionName>: Failure to remove <IPAddress> from ARP table
Notice
Failed to remove an entry from device ARP table.
<FunctionName> Log is created by this function.
<IPAddress> ip_address, or, ipv6_address, or hostname
<FunctionName>: Failure to remove <IPAddress> intf
<InterfaceNumber> from ARP table
14 December/2018
FUJITSU PSWITCH
Notice
Message Collection
Failed to remove an entry from device ARP table.
<FunctionName> Log is created by this function.
<IPAddress> ip_address, or, ipv6_address, or hostname
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<FunctionName>: Failure updating <IPAddress> intf
<InterfaceNumber> in device ARP table
Notice
Failed to motify an entry in device ARP table.
<FunctionName> Log is created by this function.
<IPAddress> ip_address, or, ipv6_address, or hostname
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<FunctionName>: found entry, but lookup of <IPAddress> got
<IPAddress> instead
Notice
There is an error in data structure. System abort.
<FunctionName> Log is created by this function.
<IPAddress> ip_address, or, ipv6_address, or hostname
<FunctionName>: Message queue overflow (one or more occurrences)
Notice
Message Queue overflow.
<FunctionName> Log is created by this function.
<FunctionName>: Unable to allocate ARP IP Table data heap
Notice
Failed to allocate a block of memory.
<FunctionName> Log is created by this function.
<FunctionName>: Unable to allocate ARP IP Table tree heap
December/2018 15
Message Collection
Notice
Failed to allocate a block of memory.
<FunctionName> Log is created by this function.
FUJITSU PSWITCH
<FunctionName>: Unable to create ARP Map Reissue Task msg queue
Notice
Failed to create a message queue.
<FunctionName> Log is created by this function.
<FunctionName>: Unable to initialize ARP Callback task
Notice
Failed to initialize a task.
<FunctionName> Log is created by this function.
<FunctionName>: Unable to initialize ARP Reissue task()
Notice
Failed to initialize a task.
<FunctionName> Log is created by this function.
<FunctionName>: Wrong table entry obtained for addr <IPAddress>
Notice
There is an error in data structure. System abort.
<FunctionName> Log is created by this function.
<IPAddress> ip_address, or, ipv6_address, or hostname
<FunctionName>: Wrong table entry obtained for addr <IPAddress> intf <InterfaceNumber>
Notice
There is an error in data structure. System abort.
<FunctionName> Log is created by this function.
<IPAddress> ip_address, or, ipv6_address, or hostname
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Error taking ARP message queue semaphore.
16 December/2018
FUJITSU PSWITCH
Notice
Failed to take a semaphore.
Message Collection
Failed to remove secondary address from ARP interface
<InterfaceNumber>.
Notice
Failed to remove secondary address to an ARP interface.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failure creating ARP callback thread message queue semaphore.
Notice
Failed to create a semaphore.
Invalid key length in ipMapArpIpIntfCompare
Notice
Detected invaild key length in AVL tree.
IPM_ARP: ARP_AddInterface failed for arp intf <Index>, rc=<ErrorCode>
Notice
Failed to add an ARP interface.
<Index> Index
<ErrorCode> Error code
IPM_ARP: ARP_AddLocalAddr failed for IP addr <IPAddress> (arp intf
<Index>), rc=<ErrorCode>
Notice
Failed to add IP-MAC entry.
<IPAddress> ip_address, or, ipv6_address, or hostname
<Index>
<ErrorCode>
Index
Error code
IPM_ARP: ARP_AddLocalAddr failed for IP addr 0x<IPAddress> (arp intf <Index>), rc=<ErrorCode>
December/2018 17
Message Collection
Notice
FUJITSU PSWITCH
Failed to add IP-MAC entry.
<IPAddress> ip_address, or, ipv6_address, or hostname
<Index>
<ErrorCode>
Index
Error code
IPM_ARP: ARP_DelInterface failed for arp intf <Index>, rc=<ErrorCode>
Notice
Failed to delete an ARP interface.
<Index> Index
<ErrorCode> Error code
IPM_ARP: ARP_DelLocalAddr failed for IP addr <IPAddress> (arp intf
<Index>), rc=<ErrorCode>
Notice
Failed to delete IP-MAC entry.
<IPAddress> ip_address, or, ipv6_address, or hostname
<Index> Index
<ErrorCode> Error code
IPM_ARP: ARP_DelLocalAddr failed for IP addr 0x<IPAddress> (arp intf <Index>), rc=<ErrorCode>
Notice
Failed to delete IP-MAC entry.
<IPAddress> ip_address, or, ipv6_address, or hostname
<Index>
<ErrorCode>
Index
Error code
IPM_ARP: Could not create ARP component lock
Notice
Failed to create a semaphore.
IPM_ARP: Could not create ARP IP lookup table, rc=<ErrorCode>
18 December/2018
FUJITSU PSWITCH
Notice
Received a failure during creating ARP IP lookup table.
<ErrorCode> Error code
Message Collection
IPM_ARP: Could not destroy ARP IP lookup table, rc=<ErrorCode>
Notice
Failed to delete ARP IP lookup table.
<ErrorCode> Error code
IPM_ARP: Could not register ARP Query callback with DTL, rc=<ErrorCode>
Notice
Failed to register a function from a hardware.
<ErrorCode> Error code
IPM_ARP: Failed to initialize L3 ARP Manager, rc=<ErrorCode>
Notice
Received a failure during initializing L3 ARP Manager.
<ErrorCode> Error code
IPM_ARP: OLL_Extract failed for ARP intf <Index>, rc=<ErrorCode>
Notice
Failed to extract an element from Ordered linked list.
<Index> Index
<ErrorCode> Error code
IPM_ARP: OLL_Insert failed for arp intf <Index>, rc=<ErrorCode>
Notice
Failed to insert an element into Ordered linked list.
<Index> Index
<ErrorCode> Error code
IPM_ARP: Out of resource for intf register
(obj=0x<InterfaceNumber>)
December/2018 19
Message Collection
Notice
FUJITSU PSWITCH
Failed to allocate a block of memory.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
IPM_ARP: Unable to allocate local intf instance for obj=0x<InterfaceNumber>
Notice
Failed to allocate a block of memory.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
ipMapArpLocalEntryAdd failed for IP addr <IPAddress> (arp intf
<Index>), rc=<ErrorCode>
Notice
Failed to add IP-MAC entry.
<IPAddress> ip_address, or, ipv6_address, or hostname
<Index>
<ErrorCode>
Index
Error code
ipMapArpLocalEntryDel failed for IP addr <IPAddress> (arp intf
<Index>), rc=<ErrorCode>
Notice
Failed to delete IP-MAC entry.
<IPAddress> ip_address, or, ipv6_address, or hostname
<Index> Index
<ErrorCode> Error code
Out of memory in routing heap.
Notice
Out of memory.
Semaphore give failure for file <FileName>:<FileLineNumber>, rc=<ErrorCode>, id=<SemaphoreID>
20 December/2018
FUJITSU PSWITCH
Notice
Failed to give a semaphore.
<FileName> Log is created by this file.
<FileLineNumber>
<ErrorCode>
<SemaphoreID>
Log is created by this line.
Error code
Semaphore ID
Message Collection
Semaphore take failure for file <FileName>:<FileLineNumber>, rc=<ErrorCode>, id=<SemaphoreID>
Notice
Failed to take a semaphore.
<FileName> Log is created by this file.
<FileLineNumber>
<ErrorCode>
<SemaphoreID>
Log is created by this line.
Error code
Semaphore ID
Synchronization error reading from ARP callback thread message queues.
Notice
Failed to read a message from message queue.
Received ARP <ARPMessageType> on interface <InterfaceNumber> with bad target IP address <IPAddress>. Sender IP is <IPAddress>, sender MAC is <MacAddress>.
Warning
Received an invaild IP address.
<ARPMessageType> "Reply", "Request"
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<IPAddress>
<MacAddress>
0/1, 0/0/1 ip_address, or, ipv6_address, or hostname
MAC address
2.1.2.
AUTO_DISCOVERY
Failed to send a packet to ipPort: <IPAddress>:<IPPortNumber>
(bufSz=<MaxValue>,sentSz=<PacketLength>): <ErrorMessage>
December/2018 21
Message Collection
Debug
FUJITSU PSWITCH
Failed to send unicast packet. Possible socket error.
<IPAddress> ip_address, or, ipv6_address, or hostname
<IPPortNumber>
<MaxValue>
<PacketLength>
<ErrorMessage>
UDP or TCP port number, ex:8000, 21
Maximum value
Packet length
Error message
Sent a packet to ipPort: <IPAddress>:<IPPortNumber>
(bufSz=<MaxValue>,sentSz=<PacketLength>).
Debug
A debug message indicates a packet is sent successfully.
<IPAddress> ip_address, or, ipv6_address, or hostname
<IPPortNumber> UDP or TCP port number, ex:8000, 21
<MaxValue>
<PacketLength>
Maximum value
Packet length
Updating network port multicast group.
Debug
A debug message when network port changed its IP address.
Updating service port multicast group.
Debug
A debug message when service port changed its IP address.
AutoDiscovery receiver task initialization failed.
Error
Error occurred during Auto Discovery initialization.
AutoDiscovery task initialization failed.
Error
Error occurred during Auto Discovery initialization.
Failed to allocate a block of memory for Auto Discovery
Configuration Database.
22 December/2018
FUJITSU PSWITCH
Error
Error occurred during Auto Discovery initialization.
Message Collection
Failed to allocate a block of memory for Auto Discovery Debug
Configuration.
Error
Error occurred during Auto Discovery initialization.
Failed to allocate memory for Auto Discovery apptimer buffers.
Error
Error occurred during Auto Discovery initialization.
Failed to bind IPv4 SSDP socket, sockFd=<SocketFD>:
<ErrorMessage>
Error
Socket Error during initializing SSDP.
<SocketFD> File descriptor for socket
<ErrorMessage> Error message
Failed to bind IPv6 SSDP socket, sockFd=<SocketFD>:
<ErrorMessage>
Error
Socket Error during initializing SSDP.
<SocketFD> File descriptor for socket
<ErrorMessage> Error message
Failed to create Auto Discovery semaphore for config database.
Error
Error occurred during Auto Discovery initialization.
Failed to create Auto Discovery semaphore for timers.
December/2018 23
Message Collection
Error
Error occurred during Auto Discovery initialization.
FUJITSU PSWITCH
Failed to create AutoDiscovery message queue semaphore.
Error
Error occurred during Auto Discovery initialization.
Failed to create IPv4 SSDP socket: <ErrorMessage>
Error
Failed to create socket.
<ErrorMessage> Error message
Failed to create IPv6 SSDP socket: <ErrorMessage>
Error
Failed to create socket.
<ErrorMessage> Error message
Failed to hash serial number string.
Error
System internal error.
Failed to initialize Auto Discovery apptimer control block.
Error
Error occurred during Auto Discovery initialization.
Failed to join 239.255.255.250 multicast group on network port:
<ErrorMessage>
Error
Socket Error during initializing SSDP when joining multicast group.
<ErrorMessage> Error message
Failed to join 239.255.255.250 multicast group on service port:
<ErrorMessage>
24 December/2018
FUJITSU PSWITCH
Error
Message Collection
Socket Error during initializing SSDP when joining multicast group.
<ErrorMessage> Error message
Failed to join ff02::c multicast group on network port, sockFd=<SocketFD>: <ErrorMessage>
Error
Socket Error during initializing SSDP.
<SocketFD> File descriptor for socket
<ErrorMessage> Error message
Failed to join ff02::c multicast group on service port, sockFd=<SocketFD>: <ErrorMessage>
Error
Socket Error during initializing SSDP.
<SocketFD> File descriptor for socket
<ErrorMessage> Error message
Failed to receive message from auto discovery message queue.
Error
Failed to retrieve message from queue.
Failed to register to IP MAP.
Error
Error occurred during Auto Discovery initialization.
Failed to register to SIM for network port IPv4 address change.
Error
Error occurred during Auto Discovery initialization.
Failed to register to SIM for service port IPv4 address change.
December/2018 25
Message Collection
Error
Error occurred during Auto Discovery initialization.
FUJITSU PSWITCH
Failed to send an IPv6 alive packet(bufSz=<MaxValue>,sentSz=<PacketLength>): <ErrorMessage>
Error
Failed to send SSDP alive multicast packet. Possible socket error.
<MaxValue> Maximum value
<PacketLength>
<ErrorMessage>
Packet length
Error message
Failed to set IP_PKTINFO socket option, sockFd=<SocketFD>:
<ErrorMessage>
Error
Socket Error during initializing SSDP.
<SocketFD> File descriptor for socket
<ErrorMessage> Error message
Failed to set IPv6 Only socket option, sockFd=<SocketFD>:
<ErrorMessage>
Error
Socket Error during initializing SSDP.
<SocketFD> File descriptor for socket
<ErrorMessage> Error message
Failed to set L7_IP_MULTICAST_IF socket option for ip address
<IPAddress>, sockFd=<SocketFD>: <ErrorMessage>
Error
Socket error when setting interface to send multicast message.
<IPAddress> ip_address, or, ipv6_address, or hostname
<SocketFD> File descriptor for socket
<ErrorMessage> Error message
Failed to set L7_IP_MULTICAST_LOOP socket option, sockFd=<SocketFD>: <ErrorMessage>
26 December/2018
FUJITSU PSWITCH
Error
Failed to set multicast loop socket option.
<SocketFD> File descriptor for socket
<ErrorMessage> Error message
Message Collection
Failed to set L7_IPV6_MULTICAST_HOPS socket option, sockFd=<SocketFD>: <ErrorMessage>
Error
Socket Error during initializing SSDP.
<SocketFD> File descriptor for socket
<ErrorMessage> Error message
Failed to set L7_IPV6_MULTICAST_LOOP socket option, sockFd=<SocketFD>: <ErrorMessage>
Error
Socket Error during initializing SSDP.
<SocketFD> File descriptor for socket
<ErrorMessage> Error message
Failed to set L7_IPV6_RECVPKTINFO socket option, sockFd=<SocketFD>: <ErrorMessage>
Error
Socket Error during initializing SSDP.
<SocketFD> File descriptor for socket
<ErrorMessage> Error message
Failed to set L7_IPV6_UNICAST_HOPS socket option, sockFd=<SocketFD>: <ErrorMessage>
Error
Socket Error during initializing SSDP.
<SocketFD> File descriptor for socket
<ErrorMessage> Error message
Failed to set REUSEADDR socket option, sockFd=<SocketFD>:
<ErrorMessage>
December/2018 27
Message Collection
Error
Socket Error during initializing SSDP.
<SocketFD> File descriptor for socket
<ErrorMessage> Error message
FUJITSU PSWITCH
Failed to take auto discovery message queue semaphore.
Error
Failed to take semaphore.
Unable to add a packet response event into
<AutoDiscoveryMsgQueueName> message queue.
Error
Message queue failure. System internal communication error.
<AutoDiscoveryMsgQueueName> The name of message queue
Unable to create AutoDiscovery receiver task
Error
Error occurred during Auto Discovery initialization.
Unable to create AutoDiscovery task
Error
Error occurred during Auto Discovery initialization.
Unable to create mapping thread message queues for AutoDiscovery.
Error
Error occurred during Auto Discovery initialization.
Unable to resolve destination address to send response.
Error
Cannot send message to an unknown unicast address.
Auto Discovery SSDP is ready.
28 December/2018
FUJITSU PSWITCH
Informational
SSDP is enabled successfully.
Auto Discovery SSDP is successfully stopped.
Informational
SSDP is disabled successfully.
Failed to apply configuration data.
Notice
Error occurred during Auto Discovery restores its configuration.
Message Collection
Auto Discovery is inactive on network port: No IP address on interface.
Notice
Auto Discovery feature is inactive on network port because no IP address is set on network port.
Auto Discovery is inactive on service port: No IP address on interface.
Notice
Auto Discovery feature is inactive on service port because no IP address is set on service port.
Failed to set L7_IP_MULTICAST_IF socket option for all interfaces, sockFd=<SocketFD>: <ErrorMessage>
Notice
Failed to set interface to send multicast message.
<SocketFD> File descriptor for socket
<ErrorMessage> Error message
Received an unknown address type. addrType=<InterfaceType>
December/2018 29
Message Collection
Notice
System internal error.
<InterfaceType>
FUJITSU PSWITCH
"L7_PHYSICAL_INTF", "L7_STACK_INTF", "L7_CPU_INTF",
"L7_MAXPHYS_INTF_VALUE", "L7_LAG_INTF"...
Unable to send a response packet to <IPAddress>:<IPPortNumber>.
Notice
Socket error when sending response packet.
<IPAddress> ip_address, or, ipv6_address, or hostname
<IPPortNumber> UDP or TCP port number, ex:8000, 21
Failed to take timer semaphore, SSDP timer stopped.
Warning
Failed to take semaphore.
2.1.3.
BOOTP_CLIENT
BOOTP registrar ID <ComponentID>, <InterfaceNumber> already registered
Informational
BOOTP notify function already register
<ComponentID> Component ID
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
BOOTP registrar ID <ComponentID>, <InterfaceNumber> greater than
Last Component ID
Informational
Input component ID over last component ID
<ComponentID> Component ID
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
bootp_size(): Oversize BOOTP packet in bootp_size
30 December/2018
FUJITSU PSWITCH
Informational
BOOTP packet over bootp size
Message Collection
bootp_size():Bad BOOTP cookie
Informational
BOOTP cookie is invaild
bootpVendorSpecificValuesRequest(): DNS domain name list entry add failed
Informational
Added DNS name list entry failed
bootpVendorSpecificValuesRequest(): DNS name server entry add failed
Informational
Added DNS name server entry failed
bootpVendorSpecificValuesRequest(): Error in Receiving the packet
Informational
BOOTP received message failed
bootpVendorSpecificValuesRequest(): Failed to create socket
Informational
BOOTP create socket failed
bootpVendorSpecificValuesRequest(): osapiSetBroadAddr failed
Informational
BOOTP set broadcast address failed
bootpVendorSpecificValuesRequest(): osapiSetsockopt
IP_MULTICAST_TTL failed
December/2018 31
Message Collection
Informational
BOOTP set multicast socket option failed
FUJITSU PSWITCH
bootpVendorSpecificValuesRequest(): osapiSetsockopt
SO_BROADCAST failed
Informational
BOOTP set broadcast socket option failed
bootpVendorSpecificValuesRequest(): osapiSetsockopt
SO_REUSEADDR failed
Informational
BOOTP set unicast socket option failed
bootpVendorSpecificValuesRequest(): osapiSocketBind error
Informational
BOOTP bind socket failed
bootpVendorSpecificValuesRequest(): osapiSocketSendto error
Informational
BOOTP send message failed
bootpVendorSpecificValuesRequest():Timeout
Informational
BOOTP socket select timeout
do_bootp(): Error in Receiving the packet
Informational
BOOTP received message failed
do_bootp(): Failed to create socket
32 December/2018
FUJITSU PSWITCH
Informational
BOOTP create socket failed
Message Collection
do_bootp(): osapiNetIfConfig Failed for Service Interface
Informational
Configure IP interface failed
do_bootp(): osapiSetBroadAddr failed
Informational
BOOTP set broadcast address failed
do_bootp(): osapiSetsockopt IP_MULTICAST_TTL failed
Informational
BOOTP set multicast socket option failed
do_bootp(): osapiSetsockopt SO_BROADCAST failed
Informational
BOOTP set broadcast socket option failed
do_bootp(): osapiSetsockopt SO_REUSEADDR failed
Informational
BOOTP set unicast socket option failed
do_bootp(): osapiSocketBind error
Informational
BOOTP bind socket failed
do_bootp():Timeout
Informational
BOOTP socket select timeout
Failed to Create BootP Task
December/2018 33
Message Collection
Informational
Create BOOTP task failed
FUJITSU PSWITCH
Failed to send BOOTP request packet; rc - <ErrorCode>
Informational
BOOTP send message failed
<ErrorCode> Error code
Failed to send BOOTP request packet; Error No-<ErrorCode> Error
String-<ErrorMessage>
Informational
BOOTP send message failed
<ErrorCode> Error code
<ErrorMessage> Error message
getParamsFromBootpStruct():L7_bootp_option_get() returned failure for netmask
Informational
Getting subnet mask from BOOTP packet failed
L7_bootp_do(): DNS domain name list entry add failed
Informational
Added DNS name list entry failed
L7_bootp_do(): DNS name server entry add failed
Informational
Added DNS name server entry failed
L7_bootp():Conflict w/offered IP Addr, error=<ErrorMessage>
34 December/2018
FUJITSU PSWITCH
Informational
Server offer IP address conflict other device
<ErrorMessage> Error message
Message Collection
L7_bootp():getParamsFromBootpStruct()returned failure for network port
Informational
Getting network port BOOTP information from database failed
L7_bootp():getParamsFromBootpStruct()returned failure for service port
Informational
Getting service port BOOTP information from database failed
Option not specified in the Vendor field
Informational
BOOTP packet verdor field not specificed option
Possible Reason:This Tag value not specified on BOOTP server
Informational
This Tag value not specified on BOOTP server
Failed to bind BOOTP socket on the interface - <InterfaceNumber>,
Error: <ErrorMessage>
Notice
Binding BOOTP packet socket failed
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<ErrorMessage> Error message
Failed to create BOOTP socket, Error: <ErrorMessage>
December/2018 35
Message Collection
Notice
Create BOOTP packet socket failed
<ErrorMessage> Error message
FUJITSU PSWITCH
Failed to get ifIndex for interface <InterfaceNumber>
Notice
Getting interface index from IP stack failed
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to send the BOOTP packet on the interface <InterfaceNumber>,
Error: <ErrorMessage>
Notice
BOOTP send packet failed
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<ErrorMessage>
0/1, 0/0/1
Error message
2.1.4.
BOX_SERVICE
Error <ErrorCode> occurred when reading battery data
Informational
Failed to read battery data.
<ErrorCode> Error code
Failed to send battery missing change trap, errcode <ErrorCode>
Informational
Failed to send battery missing trap.
<ErrorCode> Error code
2.1.5.
BSP
Unit type <ID> is not supported in the current version of firmware.
36 December/2018
FUJITSU PSWITCH
Alert
Unit type is not supported in the current version of firmware.
<ID> ID
Message Collection
"Base MAC Address" of system EEPROM is not in expected format.
Critical
"Base MAC Address" of system EEPROM is not in expected format.
"Base MAC Address" of system EEPROM should not be multicast address.
Critical
"Base MAC Address" of system EEPROM should not be multicast address.
"Platform Name" in system EEPROM is not expected (<ProductName>).
Critical
"Platform Name" in system EEPROM is not expected.
<ProductName> ET-7648BRA-FOS, ET-7648BFRA-FOS
"Product Name" in system EEPROM is not expected (<ProductName>).
Critical
"Product Name" in system EEPROM is not expected.
<ProductName> ET-7648BRA-FOS, ET-7648BFRA-FOS
"Serial Number" in system EEPROM is not in expected length
(<LengthValue>).
Critical
Serial Number in system EEPROM is not in expected length.
<LengthValue> ipv6 prefix length
Could not get hpcDiagDebugPrint Semaphore.
Critical
Failed to get semaphore.
Failed to obtain "Base MAC Address" from system EEPROM.
December/2018 37
Message Collection
Critical
Failed to obtain "Base MAC Address" from system EEPROM.
FUJITSU PSWITCH
Failed to obtain "Platform Name" from system EEPROM.
Critical
Failed to obtain "Platform Name" from system EEPROM.
Failed to obtain "Product Name" from system EEPROM.
Critical
Failed to obtain "Product Name" from system EEPROM.
onie-syseeprom utility does not exist
Critical
onie-syseeprom utility does not exist.
POST: <LoopbackMode> at bcm port <InterfaceNumber> with packet length <PacketLength> failed.
Critical
Loopback test at port failed with specific packet length.
<LoopbackMode> Loopback mode
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<PacketLength>
0/1, 0/0/1
Packet length
POST: CPU type is not expected.
Critical
CPU type information is not expected.
POST: Failed to access counter <RegisterName>.<HWPortName>.
38 December/2018
FUJITSU PSWITCH
Critical
Failed to access counter registers.
<RegisterName> Chip layer register name
<HWPortName> Chip layer port name. ex: xe1
Message Collection
POST: Failed to detect CPLDs.
Critical
Failed to detect CPLDs.
POST: Fan tray <Index> is not inserted, please check it out.
Critical
Failed to detect fan trays.
<Index> Index
POST: Failed to detect PSUs.
Critical
Failed to detect PSUs.
POST: Failed to detect SPI flash.
Critical
Failed to detect SPI flash.
POST: Failed to detect temperature sensors.
Critical
Failed to detect temperature sensors.
POST: Speed of fan <Index> is zero, please check it out.
Critical
Fan speed is zero, check it out.
<Index> Index
POST: Part number of fan tray <Index> is not expected.
December/2018 39
Message Collection
Critical
Part number of fan tray is not expected.
<Index> Index
FUJITSU PSWITCH
POST: Number of fans on fan tray <Index> is not expected.
Critical
Number of fans on fan tray is not expected.
<Index> Index
POST: Fan type of fan tray <Index> is not expected.
Critical
Fan type of fan tray is not expected.
<Index> Index
POST: CRC of fan tray <Index> is not expected.
Critical
CRC of fan tray is not expected.
<Index> Index
POST: Failed to access i2c bus against fan controller.
Critical
Failed to access i2c bus against fan controller.
POST: Failed to obtain switch temperature.
Critical
Failed to obtain switch temperature.
POST: Switch temperature is over 45 degrees Celsius.
Critical
Switch temperature is over 45 degrees Celsius.
POST: Ignore "no shutdown" for issued port <InterfaceNumber>
40 December/2018
FUJITSU PSWITCH
Critical
Message Collection
Ignore "no shutdown" commands for issued port.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
POST: Service port loopback test failed.
Critical
Service port loopback test failed.
POST: SSD attribute <SSDAttribute> (id:<ID>) is failed.
Critical
Test SSD attribute failed.
<SSDAttribute> SSD attribute
<ID> ID
POST: Test phy id at port <HWPortName> failed.
Critical
Failed to test PHY ID at port.
<HWPortName> Chip layer port name. ex: xe1
POST: Failed to detect battery status.
Critical
Failed to detect battery status.
POST: Battery status is not good.
Critical
Battery status is not good.
<FunctionName>: slot <SlotNumber>: Uanble to read SFP Eeprom for port index = <InterfaceNumber>.
December/2018 41
Message Collection
Debug
FUJITSU PSWITCH
Failed to read SFP EEPROM.
<FunctionName> Log is created by this function.
<SlotNumber> Slot number
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Could not release hpcDiagDebugPrint Semaphore.
Debug
Failed to release semaphore.
Invalid PSU number (<Index>). PSU number must be between 1 and
<Index>
Debug
Invalid PSU number.
<Index> Index
I2c <I2CBus> failed to open fd errno[<ErrorCode>]
Error
Failed to open i2c file.
<I2CBus>
<ErrorCode>
I2C bus number. Ex: bus1, bus2, …
Error code
I2c <I2CBus> failed to select slave address <I2CAddress> errno[<ErrorCode>]
Error
Failed to select i2c slave address.
<I2CBus>
<I2CAddress>
I2C bus number. Ex: bus1, bus2, …
I2C address
<ErrorCode> Error code
I2C/SMBus <I2CBus> initialization FAILED
42 December/2018
FUJITSU PSWITCH
Error
I2C/SMBus initialization failed.
<I2CBus> I2C bus number. Ex: bus1, bus2, …
Message Collection
I2C/SMBus <I2CBus>: read: invalid data length = <LengthValue>
Error
I2C/SMBus read action operates wrongly.
<I2CBus> I2C bus number. Ex: bus1, bus2, …
<LengthValue> ipv6 prefix length
I2C/SMBus <I2CBus>: write: invalid data length = <LengthValue>
Error
I2C/SMBus write action operates wrongly.
<I2CBus>
<LengthValue>
I2C bus number. Ex: bus1, bus2, … ipv6 prefix length
<FunctionName>: bad crc in retrieved config data.
Notice
Failed to read HPC config data.
<FunctionName> Log is created by this function.
<FunctionName>: bspapiLocalUnitMacAddrGet returned error
Notice
Failed to get MAC address.
<FunctionName> Log is created by this function.
<FunctionName>: error from hpcHardwarePortCfgDataRetrieve().
Notice
hpcHardwarePortCfgDataRetrieve() failed.
<FunctionName> Log is created by this function.
<FunctionName>: error reading config.
December/2018 43
Message Collection
Notice
Failed to read HPC config data.
<FunctionName> Log is created by this function.
<FunctionName>: eventID <EventID> out of range
Notice
Receive unexpected event.
<FunctionName> Log is created by this function.
<EventID> Event ID
FUJITSU PSWITCH
<FunctionName>: registrarId <ComponentID> out of range
Notice
Unexpected registrar id.
<FunctionName> Log is created by this function.
<ComponentID> Component ID
<FunctionName>: Tried to add more than <MaxValue> ports.
Notice
Try to add more than maximum number of expandable ports.
<FunctionName> Log is created by this function.
<MaxValue> Maximum value
<FunctionName>: unexpected version found: <Version>
Notice
Unexpected HPC config data version.
<FunctionName> Log is created by this function.
<Version> Version
BSP initialization complete, starting switch firmware.
Notice
BSP initialization complete.
hpcBroadcastMessageSend: registrarID <ComponentID> out of range
44 December/2018
FUJITSU PSWITCH
Notice
Unexpected registrar id.
<ComponentID> Component ID
Message Collection
hpcCardEventCallbackRegister: bad return code from hpcHardwareCardEventCallbackRegister() for registrarID
<ComponentID>, <ComponentName>
Notice
hpcHardwareCardEventCallbackRegister() failed.
<ComponentID> Component ID
<ComponentName> Component name
hpcCardEventCallbackRegister: registrarID <ComponentID> out of range
Notice
Unexpected registrar id.
<ComponentID> Component ID
hpcCfgDataApply: error from hpcHardwareAdminPrefSet().
Notice
hpcHardwareAdminPrefSet() failed.
hpcCfgDataApply: error from hpcHardwareStackPortSet().
Notice
hpcHardwareStackPortSet() failed.
hpcCfgDataApply: error from hpcHardwareUnitNumberSet().
Notice
hpcHardwareUnitNumberSet() failed.
hpcCfgDataRetrieve: active stack port count exceeded limit
(<SetValue> > <MaxValue>), setting defaults.
December/2018 45
Message Collection
Notice
Active stack port count exceeded limit.
<SetValue> Set Value
<MaxValue> Maximum value
FUJITSU PSWITCH
hpcCfgDataRetrieve: bad crc in retrieved config data.
Notice
Bad crc in retrieved HPC config data.
hpcCfgDataRetrieve: error from hpcHardwareCfgDataRetrieve().
Notice
hpcHardwareCfgDataRetrieve() failed.
hpcCfgDataRetrieve: Issues in retrieved config data.
Notice
Issues in retrieved HPC config data.
hpcCfgDataRetrieve: version upgrade failed.
Notice
hpcCfgProcessVersionUpgrade() failed.
hpcInit: bad return code from hpcAddCfgDataRetrieve() call.
Notice
Unexpected issue occurs during hpcInit process.
hpcInit: bad return code from hpcApplyCfgData() call.
Notice
Unexpected issue occurs during hpcInit process.
hpcInit: bad return code from hpcCfgDataRetrieve() call.
46 December/2018
FUJITSU PSWITCH
Notice
Unexpected issue occurs during hpcInit process.
Message Collection
hpcInit: bad return code from hpcDriverAsfInit() call.
Notice
Unexpected issue occurs during hpcInit process.
hpcInit: bad return code from hpcHardwareInit() call.
Notice
Unexpected issue occurs during hpcInit process.
hpcInit: bad return code from hpcPortCfgDataRetrieve() call.
Notice
Unexpected issue occurs during hpcInit process.
hpcInit: configuration override failed.
Notice
hpcInit: configuration override failed.
hpcInit: unit-number read from hardware is higher than max supported.
Notice
Unit number is not expected.
hpcMessageSend: registrarID <ComponentID> out of range
Notice
Unexpected registrar id.
<ComponentID> Component ID
hpcReceiveCallbackRegister: registrarID <ComponentID> out of range
December/2018 47
Message Collection
Notice
Unexpected registrar id.
<ComponentID> Component ID
FUJITSU PSWITCH
hpcStackEventCallback: unknown event (<EventID>)
Notice
Receive unexpected event.
<EventID> Event ID
hpcStackPortSet: Tried to add more than
L7_MAX_STACK_PORTS_PER_UNIT stack ports.
Notice
Tried to add more than maximum stack ports.
hpcTransportMessageRecvHandler: receive_id <ComponentID> out of range
Notice
Unexpected registrar id.
<ComponentID> Component ID
Mesg len <LengthValue> more than HPC can send from registrarID
<ComponentID>, <ComponentName>
Notice
Unexpected message length is used, can not send message.
<LengthValue> ipv6 prefix length
<ComponentID> Component ID
<ComponentName> Component name
<FileName>[<FileLineNumber>] ioctl(SIOCGIFHWADDR,
'<InterfaceNumber>') failed: <ErrorCode>
48 December/2018
FUJITSU PSWITCH
Warning
Message Collection
Failed to get MAC address.
<FileName> Log is created by this file.
<FileLineNumber> Log is created by this line.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<ErrorCode>
0/1, 0/0/1
Error code
I2C/SMBus <I2CBus> already initialized!
Warning
I2C/SMBus already initialized.
<I2CBus> I2C bus number. Ex: bus1, bus2, …
Need root privilege to read IO data.
Warning
Need root privilege to read IO data.
2.1.6.
CLI_WEB
<FunctionName>: Failed to read from socket.
Alert
Failed to read from socket.
<FunctionName> Log is created by this function.
<FunctionName>: Failed to set socket to the blocked mode.
Alert
Failed to set socket to the blocked mode.
<FunctionName> Log is created by this function.
<FunctionName>: Failed to set socket to the non-blocked mode.
December/2018 49
Message Collection
Alert
Failed to set socket to the non-blocked mode.
<FunctionName> Log is created by this function.
FUJITSU PSWITCH
CLI: EXIT FROM CONFIGMODE: <UserName>
Alert
Add an entry for exit config logging even if cmd logger is disabled.
<UserName> User name
Failed to prepare temporary file to display '<FileName>'.
Alert
Read the config files into a temp script file.
<FileName> Log is created by this file.
<FileName> file does not exist.
Debug
Failed to read the file because the file does not exist.
<FileName> Log is created by this file.
1. Too long line without new line '<SetValue>'.
Debug
Check for match and write to buffer.
<SetValue> Set Value
2. Too long line without new line '<SetValue>'.
Debug
Check for match and write to buffer.
<SetValue> Set Value
Cli_Web_Mgr is not ready. Nothing to process.
50 December/2018
FUJITSU PSWITCH
Debug
CLI Web Manager is not ready. Nothing to process.
Message Collection
Configuration script file is compressed to size <SizeValue> to uncompressed <SizeValue>.
Debug
Log information for compressing configuration script file to the specific size and then write into uncompressed output config file.
<SizeValue> An integer for a specific range or a limit value.
Failed to log out user <UserName> on session <ID>.
Debug
Failed to log out user.
<UserName>
<ID>
User name
ID
Failed to post the response for the corelation id <ID> with user
'<UserName>' to the DAS component.
Debug
Failed to post the result back to the DAS component.
<ID> ID
<UserName> User name
Failed to send the message to the Cli_Web_mgr Queue.
Debug
Failed to seend message to the CLI Web Manager Queue.
Invalid arguments.
Debug
Invalid parameters input.
Received invalid event <ID>.
December/2018 51
Message Collection
Debug
Received invalid event while processing DAS event process.
<ID> ID
FUJITSU PSWITCH
Session with all matching parameters is not found.
Debug
Session with all matching parameters is not found.
session_key attribute is not supported.
Debug
Session key attribute is not supported.
System not in excuting state, unable to initialise Telnet listen port.
Debug
System not in excuting state, unable to initialise Telnet listen port.
Text Configuration of length <LengthValue> (<CountValue> CMDS) compressed to save <CompressRatio> Flash.
Debug
Log information for writing configuration into flash.
<LengthValue> ipv6 prefix length
<CountValue> Count Value
<CompressRatio> Compress configuration command into text based file block by block
User <UserName> on session <ID> logged out successfully.
Debug
Log information that the user logged out successfully.
<UserName> User name
<ID> ID
User <UserName> on WEB session <ID> logged out successfully.
52 December/2018
FUJITSU PSWITCH
Debug
Message Collection
Log information that the user on WEB session logged out successfully.
<UserName> User name
<ID> ID
Create semaphore failed.
Error
Create semaphore failed.
Error! Failed to allocate new buffer pool!
Error
Failed to allocate new buffer pool.
Failed to copy a <SetValue> profile for a user <UserName>.
Error
Failed to copy a profile for a user while getting the profile failed.
<SetValue> Set Value
<UserName> User name
Failed to copy a <SetValue> profile for a user <UserName>. Maximum allowed profiles is already configured for a session.
Error
Failed to copy a profile for a user.
<SetValue> Set Value
<UserName> User name
Failed to copy rules of a <SetValue> profile for a user <UserName>.
Error
Failed to copy rules of a profile for a user.
<SetValue> Set Value
<UserName> User name
Failed to give cliRunCfgSemaphore <SemaphoreID>.
December/2018 53
Message Collection
Error
Failed to give CLI running configure semaphore.
<SemaphoreID> Semaphore ID
FUJITSU PSWITCH
Failed to obtain system EEPROM data.
Error
Failed to obtain system EEPROM data.
Failed to take cliRunCfgSemaphore <SemaphoreID>.
Error
Failed to take CLI running configure semaphore.
<SemaphoreID> Semaphore ID
There is no posibility to extend CLI.
Error
There is no posibility to extend CLI when initing CLI.
Unable to create pipe <FilePath>
Error
Failed to create pipe.
<FilePath> File path
Unable to open pipe <FilePath>
Error
Failed to open pipe.
<FilePath> File path
<FileName>: cliWebPhaseOneInit: <FileLineNumber>: Failed to allocate memory for cliCommon.
54 December/2018
FUJITSU PSWITCH
Informational
Failed to allocate memory for cliCommon in phase one init.
<FileName> Log is created by this file.
<FileLineNumber> Log is created by this line.
Message Collection
<FunctionName>: Unable to register for DCBX notifications.
Informational
Failed to register for DCBX notifications.
<FunctionName> Log is created by this function.
<FunctionName>: Unable to register for LLDP notifications.
Informational
Failed to register for LLDP notifications.
<FunctionName> Log is created by this function.
<SessionType> Session <ID> ended for user <UserName> connected from <IPAddress>.
Informational
Session ended for user connceted.
<SessionType> "Telnet", "SSH", "Console", "Serial", "HTTP"...
<ID>
<UserName>
<IPAddress>
ID
User name ip_address, or, ipv6_address, or hostname
<SessionType> Session <ID> ended for user <UserName> connected from <IPAddress>.
Informational
Log messages when a session is removed.
<SessionType> "Telnet", "SSH", "Console", "Serial", "HTTP"...
<ID>
<UserName>
<IPAddress>
ID
User name ip_address, or, ipv6_address, or hostname
<SessionType> Session <ID> started for user <UserName> connected from <IPAddress>.
December/2018 55
Message Collection
Informational
FUJITSU PSWITCH
Log messages when a new session is created.
<SessionType> "Telnet", "SSH", "Console", "Serial", "HTTP"...
<ID>
<UserName>
<IPAddress>
ID
User name ip_address, or, ipv6_address, or hostname
Cannot set vlan participation. VLAN ID <VlanID> is out of range.
Informational
Failed to set vlan member due to the invalid VLAN ID.
<VlanID> VLAN ID
Cannot set vlan tagging. VLAN ID <VlanID> is out of range.
Informational
Failed to set vlan tagging due to the invalid VLAN ID.
<VlanID> VLAN ID
Config file Compression not supported.
Informational
Config file compression not supported when writing configuration commands into configuration script file.
Configuration applied from file <<FileName>>.
Informational
Log information for applying configuration from the specific file.
<FileName> Log is created by this file.
Configuration file <<FileName>> read from flash!
Informational
Log information of configuration file read from flash.
<FileName> Log is created by this file.
Configuration file <<FileName>> read from USB stick number <ID>!
56 December/2018
FUJITSU PSWITCH
Informational
Log information of configuration file read from USB.
<FileName> Log is created by this file.
<ID> ID
Message Collection
Configuration file could not be found on any drive!
Informational
Log information of configuration file could not be found on any drive.
Configuration script <FileName> of length <LengthValue> is compressed to <LengthValue> of size.
Informational
Log information for configuration script length.
<FileName> Log is created by this file.
<LengthValue> ipv6 prefix length
EMWEB (Console): Max number of unix login sessions exceeded.
Informational
Error because max number of console login sessions exceeded.
EMWEB (SSH): Max number of SSH login sessions exceeded.
Informational
Error because max number of SSH login sessions exceeded.
EMWEB (Telnet): Max number of Telnet login sessions exceeded.
Informational
Error because max number of telnet login sessions exceeded.
EMWEB (UDS): Max number of -show sessions exceeded.
Informational
Error because max number of Unix Domain Socket Fp-show sessions exceeded.
Error on call to osapiFsWrite routine on config file <FileName>.
December/2018 57
Message Collection
Informational
Error on call to osapiFsWrite routine on config file.
<FileName> Log is created by this file.
FUJITSU PSWITCH
Error: osapiFsWrite failed on banner file <FileName>.
Informational
Failed to write banner file.
<FileName> Log is created by this file.
ewaNewConnection EmWeb socket accept() failed: <ErrorCode>.
Informational
Failed to accept EmWeb socket.
<ErrorCode> Error code
ewaNewConsoleConnection EmWeb socket accept() failed:
<ErrorCode>.
Informational
Failed to accept Console EmWeb socket.
<ErrorCode> Error code
ewaNewConsoleConnection Failed to read username: <ErrorCode>.
Informational
Failed to read user name from console connection.
<ErrorCode> Error code
ewaNewSSHConnection EmWeb socket accept() failed: <ErrorCode>.
Informational
Failed to accept SSH EmWeb socket.
<ErrorCode> Error code
ewaNewUDSFpShowConnection of EmWeb failed to accept() socket:
<ErrorCode>.
58 December/2018
FUJITSU PSWITCH
Informational
Failed to accept Unix domain Emweb socket.
<ErrorCode> Error code
Message Collection
EwaSessionCreate(): HTTP session creation denied.
<SessionNumber> HTTP sessions of <SessionNumber> max
Informational
Failed to create session.
<SessionNumber> Session number
EwaSessionCreate(): HTTPS session creation denied.
<SessionNumber> HTTPS sessions of <SessionNumber> max
Informational
Failed to create session.
<SessionNumber> Session number
EwaSessionCreate(): Unable to create a new session.
Informational
Failed to create new session.
EwaSessionCreate(): Unable to start exec accounting.
Informational
Failed to start exec accounting.
EwaSessionIndexGet(): unable to obtain semaphore!
Informational
Failed to obtain session index get semaphore.
EwaSessionIndexGet(): unable to release semaphore!
Informational
Failed to release session index get semaphore.
EwaSessionInit(): unable to create semaphore!
December/2018 59
Message Collection
Informational
Failed to create session data semaphore.
FUJITSU PSWITCH
EwaSessionLookup(): HTTP session denied. Maximum sessions reached.
Informational
Failed to lookup session. HTTP session denied bacause it has reached the
Maximum of session.
EwaSessionLookup(): HTTPS session denied. Maximum sessions reached.
Informational
Failed to lookup session. HTTPS session denied bacause it has reached the
Maximum of session.
EwaSessionLookup(): unable to obtain semaphore!
Informational
Failed to obtain session lookup semaphore.
EwaSessionLookup(): unable to release semaphore!
Informational
Failed to release session lookup semaphore.
EwaSessionNumActiveGet(): unable to obtain semaphore!
Informational
Failed to obtain session active get semaphore.
EwaSessionNumActiveGet(): unable to release semaphore!
Informational
Failed to release session active get semaphore.
EwaSessionRemove(): unable to obtain semaphore!
60 December/2018
FUJITSU PSWITCH
Informational
Failed to obtain session remove semaphore.
Message Collection
EwaSessionRemove(): unable to release semaphore!
Informational
Failed to release session remove semaphore.
EwaSessionRemove(): Unable to send exec accounting session stop !
Informational
Failed to send exec accounting session stop.
EwaSessionTableTimeoutScan(): unable to obtain semaphore!
Informational
Failed to obtain session table timeout scan semaphore.
EwaSessionTableTimeoutScan(): unable to release semaphore!
Informational
Failed to release session table timeout scan semaphore.
EwaSessionValidate(): unable to obtain semaphore!
Informational
Failed to obtain session validate semaphore.
EwaSessionValidate(): unable to release semaphore!
Informational
Failed to release session validate semaphore.
ewsNetHTTPReceive failure in NetReceiveLoop() - closing connection.
Informational
Failure occurs then closing connection.
FAIL CMD: '<Command>'.
December/2018 61
Message Collection
Informational
Log information for executing text based comman failed.
<Command> Command
FUJITSU PSWITCH
Failed registration for CARD PLUGIN EVENTS.
Informational
Failed to register to cardmanager for card insertion/removal notifications.
Failed registration for TRAPMGR CARD EVENTS.
Informational
Failed registration for TRAPMGR CARD EVENTS.
Failed to add one or more VLANs. Maximum number <MaxValue> is reached.
Informational
Failed to add one or more VLANs due to the maximum number of VLAN number is reached.
<MaxValue> Maximum value
Failed to close the CLI banner file <FileName>.
Informational
Failed to close the CLI banner file.
<FileName> Log is created by this file.
Failed to create '<FileName>'.
Informational
Failed to create the specific file when writing text based configuration into file which is going to be written into flash.
<FileName> Log is created by this file.
Failed to Create Cli_Web Task.
62 December/2018
FUJITSU PSWITCH
Informational
Failed to create CLI Web task.
Message Collection
Failed to Create Util Task.
Informational
Failed to Create Util task.
Failed to create VLAN. VLAN ID <VlanID> is out of range.
Informational
Failed to create VLAN due to the invalid VLAN ID.
<VlanID> VLAN ID
Failed to Create Web_Java Task.
Informational
Failed to Create Web_Java Task.
Failed to de-register for DAS DM callback.
Informational
Failed to deregister DAS Component for Disconnect Message Callback.
Failed to open the CLI banner file <FileName>.
Informational
Failed to open the CLI banner file.
<FileName> Log is created by this file.
Failed to register for DAS DM callback.
Informational
Failed to register DAS Component for Disconnect Message Callback.
Failed to restart Lighttpd server.
December/2018 63
Message Collection
Informational
Failed to restart Lighttpd server.
Failed to write command block.
Informational
Failed to write command block into the config file.
Failed to write config file '<FileName>'.
Informational
Failed to write config file.
<FileName> Log is created by this file.
FUJITSU PSWITCH
Failed to write Lighttpd user config file <FileName>.
Informational
Failed to write Lighttpd user config file.
<FileName> Log is created by this file.
File size is zero or file do not exists.
Informational
Failed to get the file due to the invalid file size or file doest not exists.
Got NULL as a parameter!
Informational
Got NULL as a parameter.
Handle table overflow.
Informational
Master socket slot handle table overflow.
IO Redirection To CLI Succeeded.
64 December/2018
FUJITSU PSWITCH
Informational
Log information for IO redirecting to CLI succeeded.
Message Collection
IO Redirection To Stdout Failed.
Informational
Failed to redirect IO from console and support enabled login sessions back to standard I/O.
IO Redirection To Stdout Succeeded.
Informational
Succeeded to redirection to standard I/O.
Max Allowed size for config scripts is exceeded. Can't store the file <FileName> in flash.
Informational
Max Allowed size for config scripts is exceeded. Can't store the file in flash.
<FileName> Log is created by this file.
Not able to read the file.
Informational
Failed to read the file.
Redirecting IO to CLI Redirect Task.
Informational
Redirect IO to the console and support enabled login sessions.
Redirecting IO to stdout.
Informational
Redirect IO from console and support enabled login sessions back to standard I/O.
Restarting lighttpd on HTTP port <IPPortNumber>.
December/2018 65
Message Collection
Informational
Restarting lighttpd on HTTP port.
<IPPortNumber> UDP or TCP port number, ex:8000, 21
FUJITSU PSWITCH
Restarting lighttpd on HTTP RESTful secure port <IPPortNumber>.
Informational
Restarting lighttpd on HTTP RESTful secure port.
<IPPortNumber> UDP or TCP port number, ex:8000, 21
txtConfig Register: registrar_ID <ComponentID>, <ComponentName> already registered.
Informational
Invalid registrar ID when registering the components information.
<ComponentID> Component ID
<ComponentName> Component name
txtConfig registrar_ID <ComponentID> greater then the
LAST_COMPONENT_ID.
Informational
Invalid registrar ID when registering the components information.
<ComponentID> Component ID
txtConfig unregister: registrar_ID <ComponentID> greater then the
LAST_COMPONENT_ID.
Informational
Invalid registrar ID when deregistering the components information.
<ComponentID> Component ID
txtConfig unregister: registrar_ID <ComponentID>,
<ComponentName> already unregistered.
Informational
Invalid registrar ID when deregistering the components information.
<ComponentID> Component ID
<ComponentName> Component name
Unable to start exec accounting.
66 December/2018
FUJITSU PSWITCH
Informational
Failed to start exec accounting.
Message Collection
Uncompression not supported.
Informational
Uncompression not supported when reading the script file.
VLAN <ID> was sucessfully removed from instance <ID> and added to instance <ID>.
Informational
Log information for moving the VLAN to instances for MSTP.
<ID> ID
Error: osapiFsDeleteFile failed on banner file <FileName>.
Notice
Failed to delete banner file.
<FileName> Log is created by this file.
File size if greater than 2K. The banner file size is greater than
2K bytes.
Notice
Invalid banner file size.
HTTP RESTful port changed from <IPPortNumber> to <IPPortNumber>.
Notice
Log notification for HTTP RESTFUL port changed.
<IPPortNumber> UDP or TCP port number, ex:8000, 21
HTTP RESTful secure port changed from <IPPortNumber> to
<IPPortNumber>.
December/2018 67
Message Collection
Notice
Log notification for HTTP RESTFUL secure port changed.
<IPPortNumber> UDP or TCP port number, ex:8000, 21
FUJITSU PSWITCH
HTTP server port changed from <IPPortNumber> to <IPPortNumber>.
Notice
Log notification for HTTP server port changed.
<IPPortNumber> UDP or TCP port number, ex:8000, 21
Login Session logout index out of bounds (<ID>).
Notice
Login Session logout index out of bounds.
<ID> ID
Login Session semaphore not created.
Notice
Login Session semaphore not created.
No. of rows greater than allowed maximum of <MaxValue>. When the number of rows exceeds the maximum allowed rows.
Notice
The number of banner rows exceeds the max allowed rows.
<MaxValue> Maximum value
Secure HTTP server port changed from <IPPortNumber> to
<IPPortNumber>.
Notice
Secure HTTP server port changed when processing the secure port setting event.
<IPPortNumber> UDP or TCP port number, ex:8000, 21
Telnet Send Failed errno = <ErrorCode>. Failed to send text string to the telnet client.
68 December/2018
FUJITSU PSWITCH
Notice
Failed to send text string to the telnet client.
<ErrorCode> Error code
Message Collection
Telnet server port changed from <IPPortNumber> to <IPPortNumber>.
Notice
Telnet server port changed.
<IPPortNumber> UDP or TCP port number, ex:8000, 21
unable to get any rules for session(<ID>).
Notice
Unable to get the rule from the table.
<ID> ID
Can't set a <SetValue> profile for a user <UserName>. Invalid profile name.
Warning
Cannot set a profile for a user due to the invalid profile name.
<SetValue> Set Value
<UserName> User name
Cannot bind HTTP server to port <IPPortNumber>: <ErrorCode>.
Warning
Failed to bind HTTP server to port.
<IPPortNumber> UDP or TCP port number, ex:8000, 21
<ErrorCode> Error code
Cannot bind telnet server to port <IPPortNumber>: <ErrorCode>.
Warning
Failed to bind telnet server to port.
<IPPortNumber> UDP or TCP port number, ex:8000, 21
<ErrorCode> Error code
Cannot bind telnet6 server to port <IPPortNumber>: <ErrorCode>.
December/2018 69
Message Collection
Warning
Failed to bind telnet IPv6 server to port.
<IPPortNumber> UDP or TCP port number, ex:8000, 21
<ErrorCode> Error code
FUJITSU PSWITCH
EMWEB: attempt to disable non-blocking mode failed.
Warning
Failed to attempt to disable non-blocking mode.
EMWEB: Could not retrieve session information.
Warning
Could not retrieve session information.
Error reading from pipe <FilePath>
Warning
Failed to read from pipe.
<FilePath> File path
Error writing to pipe <FilePath>
Warning
Failed to write to pipe.
<FilePath> File path
Unable to write data into file.
Warning
Failed to write data into file.
2.1.7.
CMD_LOGGER
Error on call to osapiFsWrite routine on config file <FileName>.
70 December/2018
FUJITSU PSWITCH
Informational
File failed to write
<FileName>
Message Collection
Log is created by this file.
CLI: <IPAddress> <SessionName>
Notice
A string indicate CLI's stat and userName
<IPAddress> ip_address, or, ipv6_address, or hostname
<SessionName> Session name
CLI: <IPAddress> <SessionName> Disconnected due to Idle Timeout
Notice
The user is logged out due to timeout.
<IPAddress> ip_address, or, ipv6_address, or hostname
<SessionName> Session name
2.1.8.
CNFGR
CNFGR failed to register for apply config completions.
Alert
Failed to register component to get notifications after apply config completions.
<ComponentName> reported hardware update complete for invalid phase <PhaseID>
Error
Component reports invalid hardware update phase.
<ComponentName> Component name
<PhaseID> Hardware reconciliation phases id
Failed to take pending mask lock
December/2018 71
Message Collection
Error
Failed to take pending mask semaphore during system init.
FUJITSU PSWITCH
Invalid component <ComponentID> reports hardware update complete for phase <PhaseID>
Error
Invalid component reports hardware update phase.
<ComponentID> Component ID
<PhaseID> Hardware reconciliation phases id
<PhaseName> hardware notification to CM failed.
Informational
Failed to notify card manager when hardware update phase completes.
<PhaseName> Hardware reconciliation phases name
CNFGR: unable to create the trace buffer
Informational
Failed to create CNFGR trace buffer.
CNFGR: unable to delete the trace buffer
Informational
Failed to delete CNFGR trace buffer.
cnfgrMsgHandler: Bad status on Q1 or invalid message pointer
<ErrorCode>
Informational
Invalid CNFGR message received status on Q1.
<ErrorCode> Error code
cnfgrMsgHandler: Discarded msg on Q1 <TypeValue>
72 December/2018
FUJITSU PSWITCH
Informational
Invalid CNFGR message type on Q1.
<TypeValue> Type Value
Message Collection
cnfgrMsgHandler: Discarded msg on Q2 <TypeValue>
Informational
Invalid CNFGR message type on Q2.
<TypeValue> Type Value
cnfgrMsgInitialize: Failed to create Message Handler Q1, exiting....
Informational
Failed to create Message Handler Q1.
cnfgrMsgInitialize: Failed to create Message Handler Q2, exiting....
Informational
Failed to create Message Handler Q2.
cnfgrMsgInitialize: Failed to create Message Handler Thread, exiting....
Informational
Failed to create Message Handler Thread.
cnfgrMsgSend: Invalid Message <TypeValue>
Informational
Invalid CNFGR message type.
<TypeValue> Type Value
cnfgrTraceModeApply: Unable to apply CNFGR trace mode
(<Operation>), "handle=<HandlerID>"
December/2018 73
Message Collection
Informational
FUJITSU PSWITCH
Failed to apply CNFGR trace mode.
<Operation> Operation, "Add", "Remove", "Up", "Down", "Enable",
<HandlerID>
"Disable" …
Handler ID
Could not get next component from CR... exiting
Informational
Failed to get next component form component repository.
Could not get first component from CR... exiting
Informational
Failed to get first component form component repository.
Failed to unlock CR... exiting
Informational
Failed to unlock component repository.
Failed to lock CR... exiting
Informational
Failed to lock component repository.
Failed to lock component... exiting
Informational
Failed to lock component.
Failed to obtain member from CR... exiting
Informational
Failed to get component form component repository.
Failed to unlock component... exiting
74 December/2018
FUJITSU PSWITCH
Informational
Failed to unlock component.
Failed to obtain LocalUnitDescriptor... exiting
Informational
Failed to obtain Local Unit Descriptor.
Failed to obtain crLock... exiting
Informational
Failed to obtain component repository semaphore.
Message Collection
Invalid Handle... exiting
Informational
Invalid handle from component repository.
<ComponentName> reported unexpectedly for <PhaseName> hardware reconciliation
Warning
Component reports unexpectedly error for hardware reconciliation.
<ComponentName> Component name
<PhaseName> Hardware reconciliation phases name
<ComponentName> hardware update tally timed out. Proceeding with hardware reconciliation.
Warning
Component hardware update phase timed out.
<ComponentName> Component name
The following components did not report: <ComponentName>
December/2018 75
Message Collection
Warning
Component did not report hardware update phase done.
<ComponentName> Component name
2.1.9.
DCBX
FUJITSU PSWITCH
DCBX Create Startup done
Debug
During startup phase, DCBX module has finished the register with NIM to receive port CREATE/DELETE events.
Failed to write dcbx configuration to file <FileName>
Debug
Unable to save DCBX configuration to NVRAM.
<FileName> Log is created by this file.
Build IEEE TLV:Failed to get TLV buffer
Error
Unable to allocate buffer resource for DCBX module to build TLV.
CEE ETS: Invalid length <PacketLength> ETS TLV is received on interface <InterfaceNumber>
Error
In CEE mode, received invalid ETS TLV length from peer switch. The peer switch may not have correct configuration.
<PacketLength> Packet length
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
CEE PFC: Invalid length <PacketLength> PFC TLV is received on interface <InterfaceNumber>
76 December/2018
FUJITSU PSWITCH
Error
Message Collection
In CEE mode, received invalid PFC TLV length from peer switch. The peer switch may not have correct configuration.
<PacketLength> Packet length
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
CEE TLV process failed on interface <InterfaceNumber>.
Error
Unable to analyze CEE TLV(s), the packet may have invalid TLV information.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
CIN ETS: Invalid length <PacketLength> ETS TLV is received on interface <InterfaceNumber>
Error
In CIN mode, received invalid ETS TLV length from peer switch. The peer switch may not have correct configuration.
<PacketLength> Packet length
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
CIN PFC: Invalid length <PacketLength> PFC TLV is received on interface <InterfaceNumber>
Error
In CIN mode, received invalid PFC TLV length from peer switch. The peer switch may not have correct configuration.
<PacketLength> Packet length
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
CIN TLV process failed on interface <InterfaceNumber>.
December/2018 77
Message Collection
Error
FUJITSU PSWITCH
Unable to analyze CIN TLV(s), the packet may have invalid TLV information.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
DCBX registrar ID <ComponentID> already exists
Error
DCBX module has a component register information.
<ComponentID> Component ID
DCBX TLV(s) Validation failed on interface <InterfaceNumber>.
Error
Received invalid CIN TLV(s) from peer switch.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Duplicate application priority TLV(s) are received on interface
<InterfaceNumber>
Error
Received invalid application priority TLV from peer switch. One packets may have multiple application priority TLVs. The peer switch may not have correct configuration.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Duplicate control TLV(s) are received on interface
<InterfaceNumber>.
Error
Received invalid control TLV from peer switch. Packets may have multiple control
TLVs. The peer switch may not have correct configuration.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Duplicate ETS TLV(s) are received on interface <InterfaceNumber>
78 December/2018
FUJITSU PSWITCH
Error
Message Collection
Received invalid ETS TLV from peer switch. One packets may have multiple ETS
TLVs.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Duplicate PFC TLV(s) are received on interface <InterfaceNumber>
Error
Received invalid PFC TLV from peer switch. Packets may have multiple PFC TLVs.
The peer switch may not have correct configuration.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Error accessing dcbx config data for interface <InterfaceNumber>,
<InterfaceNumber> in dcbxMapIntIfNum.
Error
There is synchronization issue between NIM and DCBX component to process interface creation/deletion. A default configuration does not exist for this interface.
Typically a case when a new interface is created and has no pre-configuration.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to register the component due to lack of resources
Error
A component cannot add register information to DCBX module, because the register-database is full.
Failed to write applciation priority TLV
Error
Unable to build application priority TLV due to lack of resources.
Failed to write ETS config TLV
December/2018 79
Message Collection
Error
Unable to build ETS configuration TLV due to lack of resources.
FUJITSU PSWITCH
Failed to write ETS Recommendation TLV
Error
Unable to build ETS recommendation TLV due to lack of resources.
Failed to write PFC TLV
Error
Unable to build PFC TLV due to lack of resources.
IEEE DCBX TLV Process failed on interface <InterfaceNumber>.
Error
Unable to analyze IEEE TLV(s), the packet may have invalid TLV information.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Received packet is of DCBX type <DcbxVersionString>. Interface
<InterfaceNumber> is configured to operate in DCBX type
<DcbxIEEEString>
Error
Received invalid TLV version on specific interface. The interface may only allow specific TLV version (IEEE, CIN or CEE).
<DcbxVersionString> "CIN 1.0", "CEE 1.06"
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<DcbxIEEEString>
0/1, 0/0/1
"IEEE 802.1Qaz"
Configuration source is moved from interface <InterfaceNumber> to interface <InterfaceNumber>
80 December/2018
FUJITSU PSWITCH
Informational
Message Collection
New configuration source has been selected.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
dcbxCnfgrInitPhase1Process: could not allocate memory to dcbxMapTbl.
Informational
Unable to allocate memory for DCBX resource, during initialization phase.
dcbxCnfgrInitPhase2Process: Unable to register for LLDP Pdu notification callback
Informational
Unable to register for LLDP Pdu notification callback, during initialization phase. It may due to lack of resource or duplicate register.
L7_dcbxCONTROL_COMPONENT_ID: Unable to register with NIM
Informational
DCBX component cannot register with NIM, during initialization phase.
Received an interface change callback while not ready to receive it
Informational
Received an interface change event from NIM, but the DCBX module isn't ready.
The peer connected to Interface <InterfaceNumber> is selected as configuration source
Informational
Received peer switch's information on specific interface.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
DCBX registrar ID <ComponentID> greater than Last Component ID
December/2018 81
Message Collection
Notice
FUJITSU PSWITCH
A component cannot add register information to DCBX module, because of component ID is invalid.
<ComponentID> Component ID
DCBX Debug Config file <FileName> read Failed.
Warning
Unable to get DCBX debug configuration from NVRAM. The DCBX debug file may not exist in NVRAM, please save it first.
<FileName> Log is created by this file.
DCBX debug config save to file <FileName> failed.
Warning
Unable to save DCBX debug configuration to NVRAM.
<FileName> Log is created by this file.
DCBX is disabled due to multiple peers on port <InterfaceNumber> which is current configuration source and there are no auto-up ports which are eligible to be selected as configuration source
Warning
DCBX is disabled due to multiple peers on port which is current configuration source and there are no auto-up ports which are eligible to be selected as configuration source.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
DCBX is disabled on the port <InterfaceNumber> which is current configuration source and unable to find new configuration source
Warning
DCBX is disabled on the configuration source port and unable to find new configuration source. We may lost communication with peer switch.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
The current configuration source <InterfaceNumber> is timed out and unable to find new configuration source
82 December/2018
FUJITSU PSWITCH
Warning
Message Collection
The current configuration source is timed out and unable to find new configuration source. We may lost communication with peer switch.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
The current configuration source <InterfaceNumber> timed out and there are no auto-up ports which are eligible to be selected as configuration source
Warning
The current configuration source port timed out and there are no auto-up ports which are eligible to be selected as configuration source.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
2.1.10.
DCVPN
dcVpnIntfChangeCallback(): message send failed
Alert
Failed to send DCVPN message.
dcVpnNextHopChangeCallback(): message send failed
Alert
Failed to send DCVPN message.
dcVpnRoutingEventChangeCallBack(): message send failed
Alert
Failed to send DCVPN message.
dcVpnVlanChangeCallback(): message send failed
Alert
Failed to send DCVPN message.
Failed to allocate memory for <DcvpnInformation>.
December/2018 83
Message Collection
Alert
FUJITSU PSWITCH
Insufficient resources for creating DCVPN operational database.
<DcvpnInformation> String of create dcvpn description
Failed to allocate memory for DCVPN Access port AVL tree.
Alert
Insufficient resources for creating DCVPN access port database.
Failed to allocate memory for DCVPN forwarding DB AVL tree.
Alert
Insufficient resources for creating DCVPN forwarding database.
Failed to allocate memory for DCVPN Tenant AVL tree.
Alert
Insufficient resources for creating DCVPN tenant database.
Failed to allocate memory for DCVPN Tunnel AVL tree.
Alert
Insufficient resources for creating DCVPN tunnel database.
Failed to create DCVPN CNFGR message queue.
Alert
Failed to create DCVPN configurator message queue.
Failed to create DCVPN forwarding DB handling task.
Alert
Failed to create DCVPN forwarding DB handling task.
Failed to create DCVPN forwarding entries refresh/aging task.
Alert
Failed to create DCVPN forwarding entries refresh/aging task.
Failed to create DCVPN Interface Db semaphore.
84 December/2018
FUJITSU PSWITCH
Alert
Failed to create DCVPN semaphore.
Message Collection
Failed to create DCVPN L2ADDR message queue.
Alert
Failed to create DCVPN L2 address configuration message queue.
Failed to create DCVPN main task.
Alert
Failed to create DCVPN main task.
Failed to create DCVPN sync semaphore.
Alert
Failed to create DCVPN semaphore.
Unable to allocate or initialize DCVPN FDB resources.
Alert
Failed to allocate or initialize DCVPN FDB resources.
Unable to free DCVPN FDB resources.
Alert
Unable to free DCVPN FDB resources.
Unable to initialize dcVpnFdbRefreshTask()
Alert
Failed to start DCVPN forwarding entries refresh/aging task.
Unable to initialize dcVpnL2AddrTask()
Alert
Failed to start DCVPN forwarding DB handling task.
Unable to initialize dcVpnTask()
December/2018 85
Message Collection
Alert
Failed to start DCVPN main task.
FUJITSU PSWITCH
Failed to execute OVSDB configuration command.
Alert
Failed to execute OVSDB configuration command.
Deleting interface <InterfaceNumber> operational entry failed.
Entry not found! This could indicate a corruption in the interface database.
Critical
DCVPN operational access port is not found while deleting operational access port.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Deleting remote TEP <IPAddress> entry failed. Reference count is
0 but entry is not found! This could indicate a corruption in the remote TEPs database.
Critical
DCVPN tunnel remote TEP is not found while deleting remote TEP.
<IPAddress> ip_address, or, ipv6_address, or hostname
Deleting tenant <ID> access port <ID> entry failed. Entry not found! This could indicate a corruption in the access ports database.
Critical
DCVPN tenant access port is not found while deleting access port.
<ID> ID
Deleting tenant <ID> entry failed. Entry not found! This could indicate a corruption in the tenant database.
86 December/2018
FUJITSU PSWITCH
Critical
DCVPN tenant is not found while deleting tenant.
<ID> ID
Message Collection
Deleting tenant <ID> host <MacAddress> entry failed. Entry not found! This could indicate a corruption in the forwarding database.
Critical
Tenant is not found in DCVPN forwarding database while deleting tenant host.
<ID> ID
<MacAddress> MAC address
Deleting tunnel <ID> entry failed. Entry not found! This could indicate a corruption in the tunnel database.
Critical
DCVPN tunnel is not found while deleting tunnel.
<ID> ID
Failed to register with nvStore rc=<ErrorCode>
Critical
Unable to register with save and restore manager.
<ErrorCode> Error code
Unable to register for DTL DCVPN state change callback!
Critical
Unable to register with DTL for DCVPN state change callback.
Unable to register interface change callback with NIM
Critical
Unable to register with NIM for interface callback functions.
Unable to register routing event callback with IPMAP.
December/2018 87
Message Collection
Critical
FUJITSU PSWITCH
Unable to register with IPMAP for routing event callback functions.
Unable to register VLAN change callback.
Critical
Unable to register with VLAN.
Adding NVGRE Access port properties failed(<ErrorCode>) for
(<UnitNumber>/<SlotNumber>/<InterfaceNumber>)
Debug
Failed to add access port properties in driver.
<ErrorCode> Error code
<UnitNumber> Unit number
<SlotNumber> Slot number
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Adding NVGRE Network port properties failed(<ErrorCode>) for
(<UnitNumber>/<SlotNumber>/<InterfaceNumber>)
Debug
Failed to add network port properties in driver.
<ErrorCode> Error code
<UnitNumber>
<SlotNumber>
Unit number
Slot number
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Adding VXLAN Access port properties failed(<ErrorCode>) for
(<UnitNumber>/<SlotNumber>/<InterfaceNumber>)
88 December/2018
FUJITSU PSWITCH
Debug
Message Collection
Failed to add access port properties in driver.
<ErrorCode> Error code
<UnitNumber>
<SlotNumber>
Unit number
Slot number
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Adding VXLAN Network port properties failed(<ErrorCode>) for
(<UnitNumber>/<SlotNumber>/<InterfaceNumber>)
Debug
Failed to add network port properties in driver.
<ErrorCode> Error code
<UnitNumber> Unit number
<SlotNumber> Slot number
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Application mapping entry AVL delete failed. gport=<InterfaceNumber>
Debug
Application mapping entry is not exist in database of driver programing interface.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Application mapping entry AVL insert failed. gport=<InterfaceNumber> appId=<ID>
Debug
Failed to add application mapping entry in database of driver programing interface.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<ID> ID
Application mapping entry get failed.gport <InterfaceNumber> is neither VXLAN or NVGRE type.
December/2018 89
Message Collection
Debug
FUJITSU PSWITCH
Port passed is invalid in the process of getting mapped application port.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
appPortId <ID> :: (Error) Fail to get bridge L3 object id.
Debug
Failed to get network management interface Id.
<ID> ID
appPortId <ID> :: (Error) Failed to set tunneling on bridge
MAC/VLAN.
Debug
Failed to create bridge L3 interface in driver.
<ID> ID
appPortId <ID> :: (Error) next hop
USP(<UnitNumber>.<SlotNumber>.<IPPortNumber>) is not a routing interface
Debug
Routing enabled interface allow to configure next hop interface.
<ID> ID
<UnitNumber>
<SlotNumber>
<IPPortNumber>
Unit number
Slot number
UDP or TCP port number, ex:8000, 21
appPortId <ID> :: (Error) next hop
USP(<UnitNumber>.<SlotNumber>.<IPPortNumber>) is not valid
Debug
Nexthop port is not exist in database of driver programing interface.
<ID> ID
<UnitNumber>
<SlotNumber>
<IPPortNumber>
Unit number
Slot number
UDP or TCP port number, ex:8000, 21
appPortId <ID> :: (Error) Source MAC/VLAN does not match with bridge MAC/VLAN.
90 December/2018
FUJITSU PSWITCH
Debug
Message Collection
MAC address, or VLAN Id of source TEP is not match network management interface.
<ID> ID
appPortId <ID> :: Access Port configuration in hardware failed for tenant id=<ID>. rc = <ErrorCode>
Debug
Failed to create access port for tenant in hardware.
<ID> ID
<ErrorCode> Error code
appPortId <ID> :: Access Port configuration in hardware failed for tenant id=<ID>. USP <UnitNumber>.<SlotNumber>.<InterfaceNumber> rc = <ErrorCode>
Debug
Failed to create access port for tenant in hardware.
<ID> ID
<UnitNumber> Unit number
<SlotNumber> Slot number
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<ErrorCode>
0/1, 0/0/1
Error code
appPortId <ID> :: Access Port configuration remove from USL DB failed for tenant id=<ID>. rc = <ErrorCode>
Debug
Failed to remove access port in database of driver programing interface.
<ID> ID
<ErrorCode> Error code
appPortId <ID> :: Access port control set disable failed for lport=0x<InterfaceNumber>
December/2018 91
Message Collection
Debug
FUJITSU PSWITCH
Failed to disable access port control in driver.
<ID> ID
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
appPortId <ID> :: Access port control set enable failed for USP
<UnitNumber>.<SlotNumber>.<InterfaceNumber>
(lport=0x<InterfaceNumber>). rc=<ErrorCode>
Debug
Failed to enable access port control in driver.
<ID> ID
<UnitNumber>
<SlotNumber>
Unit number
Slot number
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<ErrorCode> Error code
appPortId <ID> :: Access port create failed. Unsupported tunnel type <TypeValue> specified!
Debug
Invalid or unsupported tunnel type specified.
<ID> ID
<TypeValue> Type Value
appPortId <ID> :: Access Port creation failed for tenant with id=<ID>. rv=<ErrorCode>
Debug
Failed to create access port for tenant in driver.
<ID> ID
<ErrorCode> Error code
appPortId <ID> :: Access Port DB create failed for tenant with id=<ID>. rc = <ErrorCode>
92 December/2018
FUJITSU PSWITCH
Debug
Message Collection
Failed to create access port in database of driver programing interface.
<ID> ID
<ErrorCode> Error code
appPortId <ID> :: Access Port deletion failed
Debug
Failed to delete access port in driver.
<ID> ID
appPortId <ID> :: Access Port entry USB DB create failed for tenant id=<ID> vlan <VlanID> USP
<UnitNumber>.<SlotNumber>.<InterfaceNumber>. rc = <ErrorCode>
Debug
Failed to create access port in database of driver programing interface.
<ID> ID
<VlanID> VLAN ID
<UnitNumber>
<SlotNumber>
Unit number
Slot number
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<ErrorCode> Error code
appPortId <ID> :: Access Port mapping creation failed for tenant with id=<ID>. rc = <ErrorCode>
Debug
Failed to create access port mapping in database of driver programing interface.
<ID> ID
<ErrorCode> Error code
appPortId <ID> :: Access Port modify failed for tenant with id=<ID>, rv=<ErrorCode>
December/2018 93
Message Collection
Debug
Failed to modify access port for tenant in driver.
<ID> ID
<ErrorCode> Error code
FUJITSU PSWITCH
appPortId <ID> :: Access port modify failed. Unsupported tunnel type <TypeValue> specified!
Debug
Invalid or unsupported tunnel type specified.
<ID> ID
<TypeValue> Type Value
appPortId <ID> :: Cannot clear counters for specified tunnel.Unsupported tunnel type <TypeValue> specified!
Debug
Invalid or unsupported tunnel type specified.
<ID> ID
<TypeValue> Type Value
appPortId <ID> :: Cannot create forwarding entry.Unsupported tunnel type <TypeValue> specified!
Debug
Invalid or unsupported tunnel type specified.
<ID> ID
<TypeValue> Type Value
appPortId <ID> :: Cannot delete forwarding entry.Unsupported tunnel type <TypeValue> specified!
Debug
Invalid or unsupported tunnel type specified.
<ID> ID
<TypeValue> Type Value
appPortId <ID> :: Cannot fetch counters for specified tunnel.Unsupported tunnel type <TypeValue> specified!
94 December/2018
FUJITSU PSWITCH
Debug
Invalid or unsupported tunnel type specified.
<ID> ID
<TypeValue> Type Value
Message Collection
appPortId <ID> :: Couldn't find tenant=<TenantValue> type=<TypeValue> MAC entry in the hardware.rv = <ErrorCode>
Debug
Failed to get MAC entry from hardware.
<ID> ID
<TenantValue>
<TypeValue>
<ErrorCode>
VXLAN Virtual network ID or NVGRE Virtual subnet ID
Type Value
Error code
appPortId <ID> :: Cannot Delete the only next hop for this network port
Debug
Unable to delete the only next hop for this network port.
<ID> ID
appPortId <ID> :: Couldn't delete NHOP from database. rv=<ErrorCode>
Debug
Failed to destroy tunnel nexthop from driver.
<ID> ID
<ErrorCode> Error code
appPortId <ID> :: Couldn't find access port entry in database. rv=<ErrorCode>
Debug
Access port is not exist in database of driver programing interface.
<ID> ID
<ErrorCode> Error code
appPortId <ID> :: Couldn't find non-unicast tunnel entry in database. rv=<ErrorCode>
December/2018 95
Message Collection
Debug
Tunnel is not exist in database of driver programing interface.
<ID> ID
<ErrorCode> Error code
FUJITSU PSWITCH
appPortId <ID> :: Couldn't find non-unicast tunnel port in the database. rv=<ErrorCode>
Debug
Tunnel port is not exist in database of driver programing interface.
<ID> ID
<ErrorCode> Error code
appPortId <ID> :: Couldn't find tenant entry in the database. rv=<ErrorCode>
Debug
Tenant is not exist in database of driver programing interface.
<ID> ID
<ErrorCode> Error code
appPortId <ID> :: Couldn't find tenant=<ID> type=<TypeValue> in the database. rv=<ErrorCode>
Debug
Tenant is not exist in database of driver programing interface.
<ID> ID
<TypeValue>
<ErrorCode>
Type Value
Error code
appPortId <ID> :: Couldn't find tunnel entry in database. rv=<ErrorCode>
Debug
Tunnel is not exist in database of driver programing interface.
<ID> ID
<ErrorCode> Error code
appPortId <ID> :: Couldn't find tunnel port in the database. rv=<ErrorCode>
96 December/2018
FUJITSU PSWITCH
Debug
Message Collection
Tunnel port is not exist in database of driver programing interface.
<ID> ID
<ErrorCode> Error code
appPortId <ID> :: Couldn't find vp entry in database. rv=<ErrorCode>
Debug
Tunnel nexthop is not exist in database of driver programing interface.
<ID> ID
<ErrorCode> Error code
appPortId <ID> :: Couldn't get tenant <ID> VFI information. rc=<ErrorCode>
Debug
Tenant is not exist in database of driver programing interface.
<ID> ID
<ErrorCode> Error code
appPortId <ID> :: Couldn't get tenant <ID> VFI information. result=<ErrorCode>
Debug
Tenant is not exist in database of driver programing interface.
<ID> ID
<ErrorCode> Error code
appPortId <ID> :: Couldn't Modify port
<UnitNumber>/<SlotNumber>/<InterfaceNumber>. rv=<ErrorCode>
December/2018 97
Message Collection
Debug
FUJITSU PSWITCH
Failed to modify network egress port in driver.
<ID> ID
<UnitNumber>
<SlotNumber>
Unit number
Slot number
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<ErrorCode> Error code
appPortId <ID> :: Couldn't Unconfigure port
<UnitNumber>/<SlotNumber>/<InterfaceNumber>.
Debug
Failed to disable network port control set in driver.
<ID> ID
<UnitNumber>
<SlotNumber>
Unit number
Slot number
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
appPortId <ID> :: Egress nexthop creation failed, rc <ErrorCode>
Debug
Failed to add tunnel nexthop in driver.
<ID> ID
<ErrorCode> Error code
appPortId <ID> :: Failed to clear bridge tunneling config
Debug
Failed to clear network management tunneling configuration in driver.
<ID> ID
appPortId <ID> :: Failed to create access port entry in USL DB. rv = <ErrorCode>.
98 December/2018
FUJITSU PSWITCH
Debug
Message Collection
Failed to create access port in database of driver programing interface.
<ID> ID
<ErrorCode> Error code
appPortId <ID> :: Failed to delete access port entry from hardware since vp is not created yet.
Debug
Access port is not created in hardware.
<ID> ID
appPortId <ID> :: Failed to delete access port entry from the USL
DB. Clear the hardware configuration prior to deleting the USL DB entry.
Debug
Access port configuration already cleared in hardware.
<ID> ID
appPortId <ID> :: Failed to delete application mapping entry for hwNwPort = <InterfaceNumber>. rc = <ErrorCode>
Debug
Failed to delete network port mapping in database of driver programing interface.
<ID> ID
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<ErrorCode>
0/1, 0/0/1
Error code
appPortId <ID> :: Failed to delete application mapping entry. gport = <InterfaceNumber>. rc = <ErrorCode>
Debug
Failed to delete access port mapping in database of driver programing interface.
<ID> ID
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<ErrorCode>
0/1, 0/0/1
Error code
appPortId <ID> :: Failed to delete the l2ol3 tunnel from hardware
December/2018 99
Message Collection
Debug
Failed to delete tunnel network port from hardware.
<ID> ID
FUJITSU PSWITCH
appPortId <ID> :: Failed to delete the non-unicast tunnel from hardware
Debug
Failed to delete tunnel from hardware.
<ID> ID
appPortId <ID> :: Failed to delete uc network clone entry for hwNwPort = <InterfaceNumber>. rc = <ErrorCode>
Debug
Failed to delete cloned network port from driver.
<ID> ID
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<ErrorCode> Error code
appPortId <ID> :: Failed to delete uc network clone entry for hwNwPort = <InterfaceNumber>. rv = <ErrorCode>
Debug
Failed to delete cloned network port from driver.
<ID> ID
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<ErrorCode> Error code
appPortId <ID> :: Failed to destroy egress next hop object
Debug
Failed to destroy tunnel nexthop from driver.
<ID> ID
appPortId <ID> :: Failed to destroy egress non-unicast object
100 December/2018
FUJITSU PSWITCH
Debug
Failed to destroy tunnel nexthop from driver.
<ID> ID
Message Collection
appPortId <ID> :: Failed to find access port entry in the USL DB.
Debug
Access port is not exist in database of driver programing interface.
<ID> ID
appPortId <ID> :: Failed to get egress object with id=<InterfaceNumber>
Debug
Tunnel nexthop is not exist in database of driver programing interface.
<ID> ID
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
appPortId <ID> :: Failed to modify the non-unicast tunnel from hardware
Debug
Failed to modify network egress port from hardware.
<ID> ID
appPortId <ID> :: Failed to populate access port entry. Already exists in the USL DB.
Debug
Access port is exist in database of driver programing interface.
<ID> ID
appPortId <ID> :: Installing L2 entry in hardware failed! rv=<ErrorCode>
December/2018 101
Message Collection
Debug
Failed to install L2 entry in hardware.
<ID> ID
<ErrorCode> Error code
FUJITSU PSWITCH
appPortId <ID> :: Max number of equal cost routes(<HopsValue>) already met
Debug
Tunnel nexthop already met max number.
<ID> ID
<HopsValue> The value for Hops
appPortId <ID> :: Network port control set <Operation> failed for lport=0x<InterfaceNumber>
Debug
Failed to enable/disable network mode on port in driver.
<ID> ID
<Operation> Operation, "Add", "Remove", "Up", "Down", "Enable",
"Disable" …
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
appPortId <ID> :: Network port control set disable failed for lport=0x<InterfaceNumber>
Debug
Failed to disable network port control set in driver.
<ID> ID
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
appPortId <ID> :: Network Port creation failed for tenant <ID> , rv=<ErrorCode>
102 December/2018
FUJITSU PSWITCH
Debug
Failed to create network port in driver.
<ID> ID
<ErrorCode> Error code
Message Collection
appPortId <ID> :: Network Port L3toEgress(<ID>) refCount update failed(<ErrorCode>)
Debug
Failed to update reference count of tunnel egress port.
<ID> ID
<ErrorCode> Error code
appPortId <ID> :: Network Port mapping creation failed for tenant with id=<ID>. AppId=<ID> hwNetId=<ID> rc = <ErrorCode>
Debug
Failed to create network port mapping in database of driver programing interface.
<ID> ID
<ErrorCode> Error code
appPortId <ID> :: Next Hop not found.
Debug
Next hop egress information is not exist in database of driver programing interfac.
<ID> ID
appPortId <ID> :: Non-unicast egress object create failed, rc
<ErrorCode>
Debug
Failed to add tunnel nexthop in driver.
<ID> ID
<ErrorCode> Error code
appPortId <ID> :: Non-unicast egress object find failed, rc
<ErrorCode>
December/2018 103
Message Collection
Debug
FUJITSU PSWITCH
Tunnel nexthop is not exist in database of driver programing interface.
<ID> ID
<ErrorCode> Error code
appPortId <ID> :: Non-unicast Port Clone Create Failed <ID>, rv=<ErrorCode>
Debug
Failed to clone network port in driver.
<ID> ID
<ErrorCode> Error code
appPortId <ID> :: Non-unicast Port creation failed for tenant <ID>, rv=<ErrorCode>
Debug
Failed to create network port in driver.
<ID> ID
<ErrorCode> Error code
appPortId <ID> :: Non-unicast Port Nuc base port number set failed
<ID>, rv=<ErrorCode>
Debug
Failed to update network port in tunnel database of driver programing interface.
<ID> ID
<ErrorCode> Error code
appPortId <ID> :: This is not a VXLAN network port. UDP destination port <ID> cannot be configured for non VXLAN type tunnel at HAPI
Debug
Network port is not VXLAN type tunnel.
<ID> ID
appPortId <ID> :: Unable to find the destination virtual port info for tenant <ID>. rv = <ErrorCode>
104 December/2018
FUJITSU PSWITCH
Debug
Message Collection
Real tunnel nexthop for cloned tunnel nexthop is not exist in database of driver programing interface.
<ID> ID
<ErrorCode> Error code
appPortId <ID> :: Unable to find the non unicast virtual port info for tenant <ID>. rv = <ErrorCode>
Debug
Tunnel nexthop is not exist in database of driver programing interface.
<ID> ID
<ErrorCode> Error code
appPortId <ID> :: Unicast Tunnel port create failed. Unsupported tunnel type <TypeValue> specified!
Debug
Invalid or unsupported tunnel type specified.
<ID> ID
<TypeValue> Type Value
appPortId <ID> :: Unicast Tunnel port delete failed. Unsupported tunnel type <TypeValue> specified!
Debug
Invalid or unsupported tunnel type specified.
<ID> ID
<TypeValue> Type Value
appPortId <ID> :: Unicast egress object find failed, rc
<ErrorCode>
Debug
Tunnel nexthop is not exist in database of driver programing interface.
<ID> ID
<ErrorCode> Error code
appPortId <ID> :: Unsupported match criteria=<TypeValue> supplied.
December/2018 105
Message Collection
Debug
FUJITSU PSWITCH
Unsupported packet match type supplied in the process of configuring access port in driver programing interface.
<ID> ID
<TypeValue> Type Value
appPortId <ID>: Couldn't find tenant=<ID> type=<TypeValue> MAC entry in the hardware.rv = <ErrorCode>
Debug
Failed to get MAC entry from hardware.
<ID> ID
<TypeValue>
<ErrorCode>
Type Value
Error code
Bridge L3 intf creation failed <ErrorCode>
Debug
Failed to create bridge L3 interface in driver.
<ErrorCode> Error code
Bridge L3 intf object id get failed
Debug
Failed to get network management interface Id.
Cannot create access port dummy L3 interface. Invalid VLAN
<VlanID> specified.
Debug
VLAN Id is not valid in the process of creating access port dummy L3 interface.
<VlanID> VLAN ID
Cannot destroy access port dummy L3 interface. Invalid VLAN
<VlanID> specified.
Debug
VLAN Id is not valid in the process of deleting access port dummy L3 interface.
<VlanID> VLAN ID
Couldn't delete l3 intf object for vlan=<VlanID> rv=<ErrorCode>
106 December/2018
FUJITSU PSWITCH
Debug
Failed to delete L3 interface for VLAN from driver.
<VlanID> VLAN ID
<ErrorCode> Error code
Message Collection
Couldn't get tenant <ID> VFI information. rc=<ErrorCode>
Debug
Tenant is not exist in database of driver programing interface.
<ID> ID
<ErrorCode> Error code
Create Tenant id=<ID> of type <TypeValue> failed
Debug
Failed to create tenant in driver.
<ID> ID
<TypeValue> Type Value
DCVPN activate startup done.
Debug
Process activate startup event finished.
Egress nexthop creation failed, non_unicast=<YesOrNo> rc
<ErrorCode> egrRv <ErrorCode>
Debug
Failed to create egress nexthop in driver.
<YesOrNo> "Yes" or "No"
<ErrorCode> Error code
Egress nexthop delete failed: Entry not found.
Debug
Tunnel nexthop is not exist in database of driver programing interface.
Error adding egress object entry. egrId=<ID>
December/2018 107
Message Collection
Debug
FUJITSU PSWITCH
Insufficient resources while adding tunnel nexthop in database of driver programing interface.
<ID> ID
Error adding NH Mapping entry. tunnelType=<TypeValue>
IPAddr=<IPAddress> Mac=<MacAddress>
<UnitNumber>/<SlotNumber>/<InterfaceNumber> vlan=<VlanID> nonUcEgressId=<ID>
Debug
Insufficient resources while adding tunnel nexthop in database of driver programing interface.
<TypeValue> Type Value
<IPAddress>
<MacAddress>
<UnitNumber>
<SlotNumber> ip_address, or, ipv6_address, or hostname
MAC address
Unit number
Slot number
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<VlanID>
<ID>
VLAN ID
ID
Error adding NH Mapping entry(Entry NOT valid). tunnelType=<TypeValue> IPAddr=<IPAddress> Mac=<MacAddress>
<UnitNumber>/<SlotNumber>/<InterfaceNumber> vlan=<VlanID> nonUcEgressId=<ID>
108 December/2018
FUJITSU PSWITCH
Debug
Message Collection
Next hop egress information is invalid in database of driver programing interface.
<TypeValue> Type Value
<IPAddress>
<MacAddress>
<UnitNumber>
<SlotNumber> ip_address, or, ipv6_address, or hostname
MAC address
Unit number
Slot number
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<VlanID>
<ID>
VLAN ID
ID
Error cloning NH Mapping entry. tunnelType=<TypeValue>
IPAddr=<IPAddress> Mac=<MacAddress>
<UnitNumber>/<SlotNumber>/<InterfaceNumber> vlan=<VlanID> nonUcEgressId=<ID>
Debug
Failed to clone next hop egress information in database of driver programing interface.
<TypeValue> Type Value
<IPAddress> ip_address, or, ipv6_address, or hostname
<MacAddress>
<UnitNumber>
MAC address
Unit number
<SlotNumber> Slot number
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<VlanID>
<ID>
0/1, 0/0/1
VLAN ID
ID
Error cloning NH Mapping entry(Entry NOT valid). tunnelType=<TypeValue> IPAddr=<IPAddress> Mac=<MacAddress>
<UnitNumber>/<SlotNumber>/<InterfaceNumber> vlan=<VlanID> nonUcEgressId=<ID>
December/2018 109
Message Collection
Debug
FUJITSU PSWITCH
Next hop egress information is invalid in database of driver programing interface.
<TypeValue> Type Value
<IPAddress>
<MacAddress>
<UnitNumber>
<SlotNumber> ip_address, or, ipv6_address, or hostname
MAC address
Unit number
Slot number
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<VlanID>
<ID>
VLAN ID
ID
Error cloning NH Mapping entry(Entry to clone not-found). tunnelType=<TypeValue> ucEgressId=<ID> nUcEgressId=<ID>
Debug
Next hop egress information is not exist in database of driver programing interfac.
<TypeValue> Type Value
<ID> ID
Error Deleting NH Mapping entry(Not Found). tunnelType=<TypeValue> EgressId=<ID>
Debug
Tunnel nexthop is not exist in database of driver programing interfac.
<TypeValue> Type Value
<ID> ID
Error Deleting NH Mapping entry(Not Found). tunnelType=<TypeValue> IPAddr=<IPAddress> Mac=<MacAddress>
<UnitNumber>/<SlotNumber>/<InterfaceNumber> vlan=<VlanID> nonUcEgressId=<ID>
110 December/2018
FUJITSU PSWITCH
Debug
Message Collection
Next hop egress information is not exist in database of driver programing interface.
<TypeValue> Type Value
<IPAddress>
<MacAddress>
<UnitNumber>
<SlotNumber> ip_address, or, ipv6_address, or hostname
MAC address
Unit number
Slot number
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<VlanID>
<ID>
VLAN ID
ID
Error Deleting NH Mapping entry(Ref count = 0)
Debug
Tunnel nexthop is not configured in hardware.
Error Deleting NUC NH Mapping entry(Not Found). tunnelType=<TypeValue> IPAddr=<IPAddress> Mac=<MacAddress>
<UnitNumber>/<SlotNumber>/<InterfaceNumber> vlan=<VlanID> nonUcEgressId=<ID>
Debug
Next hop egress information is not exist in database of driver programing interfac.
<TypeValue> Type Value
<IPAddress> ip_address, or, ipv6_address, or hostname
<MacAddress>
<UnitNumber>
MAC address
Unit number
<SlotNumber> Slot number
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<VlanID>
<ID>
0/1, 0/0/1
VLAN ID
ID
Error During NextHop(<ID>) Find rc <ErrorCode>
December/2018 111
Message Collection
Debug
FUJITSU PSWITCH
Tunnel nexthop is not exist in database of driver programing interface.
<ID> ID
<ErrorCode> Error code
Error Modifing NH Mapping entry(Not Found). EgressId=<ID>
<UnitNumber>/<SlotNumber>/<InterfaceNumber>
Debug
Next hop egress information is not exist in database of driver programing interface.
<ID> ID
<UnitNumber>
<SlotNumber>
Unit number
Slot number
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Error Modifing NH Mapping entry(Ref Count=0). EgressId=<ID>
<UnitNumber>/<SlotNumber>/<InterfaceNumber>
Debug
Next hop egress is not configured in hardware.
<ID> ID
<UnitNumber>
<SlotNumber>
Unit number
Slot number
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Error Modifing NUC NH Mapping entry(Ref Count=0). EgressId=<ID>
<UnitNumber>/<SlotNumber>/<InterfaceNumber>
112 December/2018
FUJITSU PSWITCH
Debug
Message Collection
Next hop egress is not configured in hardware.
<ID> ID
<UnitNumber>
<SlotNumber>
Unit number
Slot number
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Error Modifying NUC NH Mapping entry(rc=<ErrorCode>). tunnelType=<TypeValue> IPAddr=<IPAddress> Mac=<MacAddress>
<UnitNumber>/<SlotNumber>/<InterfaceNumber> vlan=<VlanID> nonUcEgressId=<ID>
Debug
Failed to modify nexthop in driver.
<ErrorCode> Error code
<TypeValue> Type Value
<IPAddress>
<MacAddress>
<UnitNumber>
<SlotNumber> ip_address, or, ipv6_address, or hostname
MAC address
Unit number
Slot number
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<VlanID>
<ID>
VLAN ID
ID
Error Updating NH Mapping entry(Not Found). tunnelType=<TypeValue> EgressId=<ID>
Debug
Tunnel nexthop is not exist in database of driver programing interfac.
<TypeValue> Type Value
<ID> ID
Failed to <Operation> Access mode on Port
<UnitNumber>.<SlotNumber>.<InterfaceNumber>
(lport=0x<InterfaceNumber>).
December/2018 113
Message Collection
Debug
FUJITSU PSWITCH
Failed to enable/disable access mode on port in driver.
<Operation> Operation, "Add", "Remove", "Up", "Down", "Enable",
<UnitNumber>
"Disable" …
Unit number
<SlotNumber> Slot number
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to <Operation> Network/Tunnel mode on Port
<UnitNumber>.<SlotNumber>.<InterfaceNumber>
(lport=0x<InterfaceNumber>).
Debug
Failed to enable/disable network/tunnel mode on port in driver.
<Operation>
<UnitNumber>
Operation, "Add", "Remove", "Up", "Down", "Enable",
"Disable" …
Unit number
<SlotNumber> Slot number
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to delete egress nexthop from hardware.
Debug
Failed to delete egress nexthop from hardware.
Failed to delete tenant L2 entry with VFI = 0x<IPAddress>. rv=<ErrorCode>
Debug
Failed to delete L2 entry in driver.
<IPAddress> ip_address, or, ipv6_address, or hostname
<ErrorCode> Error code
Failed to find lport (0x<InterfaceNumber>) in AVL tree.
114 December/2018
FUJITSU PSWITCH
Debug
Message Collection
Access port is not exist in database of driver programing interface.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to get appPortNum for MAC address entry <MacAddress>
Debug
Failed to get application port number for MAC address from port mapping database in driver programing interface.
<MacAddress> MAC address
Failed to insert Port(0x<InterfaceNumber>) in AVL tree. lport
Table is FULL.
Debug
Insufficient resources while adding access port to database in driver programing interface.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to update DCVPN L2 forwarding entry hit bits.
Debug
Failed to update hit bits of L2 entry in hardware.
hapiBridgeMacVlanCheck: Bridge MAC did not match!
Debug
MAC address of source TEP is not match network management interface.
hapiBridgeMacVlanCheck: Bridge VLAN did not match!
Debug
VLAN Id of source TEP is not match network management interface.
Incorrect port configuration detected. Port
<UnitNumber>.<SlotNumber>.<InterfaceNumber>
(lport=0x<InterfaceNumber>) is already configured in <TypeValue> mode. Same physical/LAG port cannot be configured in <TypeValue> mode.
December/2018 115
Message Collection
Debug
FUJITSU PSWITCH
Access port already configured in another mode.
<UnitNumber> Unit number
<SlotNumber> Slot number
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<TypeValue>
0/1, 0/0/1
Type Value
Invalid lport = <InterfaceNumber>, Neither physical nor Lag! type
<TypeValue> enable <TrueOrFalse>
Debug
Invalid or unsupported tunnel type specified.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<TypeValue>
<TrueOrFalse>
Type Value
String; "True", "False"
L2 Flush failed (<ErrorCode>) during application mapping entry AVL insert. gport=<InterfaceNumber> vfi=<IPAddress> appId=<ID>
Debug
Failed to flush non-static L2 entries on DCVPN port in hardware.
<ErrorCode> Error code
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<IPAddress>
<ID>
0/1, 0/0/1 ip_address, or, ipv6_address, or hostname
ID
L3 intf creation failed for vlan <VlanID> rv=<ErrorCode>
Debug
Failed to create L3 interface for VLAN in driver.
<VlanID> VLAN ID
<ErrorCode> Error code
lport=0x<InterfaceNumber> control set <SetValue>=<VlanID> failed.
116 December/2018
FUJITSU PSWITCH
Debug
Message Collection
Failed to set port control configuration in driver.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<SetValue>
<VlanID>
0/1, 0/0/1
Set Value
VLAN ID
lport=0x<InterfaceNumber> vlan control set <SetValue>=<VlanID> failed.
Debug
Failed to set VLAN port control configuration in driver.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<SetValue>
<VlanID>
0/1, 0/0/1
Set Value
VLAN ID
NextHop Not Found during modify
Debug
Tunnel nexthop is not exist in database of driver programing interface.
NULL Port Pointer passed hapiPortPtr=0x<InterfaceNumber> dapiPortPtr=0x<InterfaceNumber>
Debug
Invalid parameters passed in the process of configuring access port database in driver programing interface.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
NVGRE tenant id=<ID> deletion failed
Debug
Failed to delete tenant from driver.
<ID> ID
Removing NVGRE Access port properties failed(<ErrorCode>) for
(<UnitNumber>/<SlotNumber>/<InterfaceNumber>)
December/2018 117
Message Collection
Debug
FUJITSU PSWITCH
Failed to remove access port properties in driver.
<ErrorCode> Error code
<UnitNumber>
<SlotNumber>
Unit number
Slot number
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Removing NVGRE Network port properties failed(<ErrorCode>) for
(<UnitNumber>/<SlotNumber>/<InterfaceNumber>)
Debug
Failed to remove network port properties in driver.
<ErrorCode> Error code
<UnitNumber> Unit number
<SlotNumber> Slot number
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Removing VXLAN Access port properties failed(<ErrorCode>) for
(<UnitNumber>/<SlotNumber>/<InterfaceNumber>)
Debug
Failed to remove access port properties in driver.
<ErrorCode> Error code
<UnitNumber>
<SlotNumber>
Unit number
Slot number
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Removing VXLAN Network port properties failed(<ErrorCode>) for
(<UnitNumber>/<SlotNumber>/<InterfaceNumber>)
Debug
Failed to remove network port properties in driver.
<ErrorCode> Error code
<UnitNumber> Unit number
<SlotNumber> Slot number
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Sema give failed, semId <ID>
118 December/2018
FUJITSU PSWITCH
Debug
Failed to give semaphore.
<ID> ID
Sema take failed, semId <ID>
Debug
Failed to take semaphore.
<ID> ID
Message Collection
Switch vxlan UDP destination port <InterfaceNumber> set failed. rv=<ErrorCode>
Debug
Failed to set VXLAN UDP destination port in driver.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<ErrorCode> Error code
tenant <ID> :: Cannot fetch forwarding entry.Unsupported tunnel type <TypeValue> specified!
Debug
Invalid or unsupported tunnel type specified.
<ID> ID
<TypeValue> Type Value
Tenant <ID> create failed. Unsupported tunnel type <TypeValue> specified!
Debug
Invalid or unsupported tunnel type specified.
<ID> ID
<TypeValue> Type Value
Tenant <ID> delete failed. Unsupported tunnel type <TypeValue> specified!
December/2018 119
Message Collection
Debug
Invalid or unsupported tunnel type specified.
<ID> ID
<TypeValue> Type Value
FUJITSU PSWITCH
Tunnel entry AVL delete failed. srcIP=0x<IPAddress> dstIP=0x<IPAddress>
Debug
Tunnel is not exist while deleting tunnel in driver programing interface.
<IPAddress> ip_address, or, ipv6_address, or hostname
Tunnel entry AVL insert failed. srcIP=0x<IPAddress> dstIP=0x<IPAddress>
Debug
Insufficient resources while adding tunnel to database in driver programing interface.
<IPAddress> ip_address, or, ipv6_address, or hostname
Tunnel entry AVL ref_count == 0. srcIP=0x<IPAddress> dstIP=0x<IPAddress>
Debug
Tunnel is exist, but already delete from hardware while deleting tunnel in driver programing interface.
<IPAddress> ip_address, or, ipv6_address, or hostname
Unable to delete entry from next hop AVL tree: Does not exist
Debug
Tunnel nexthop is not exist in database of driver programing interface.
Unable to delete network port(<InterfaceNumber>) entry from AVL tree: Does not exist
120 December/2018
FUJITSU PSWITCH
Debug
Message Collection
Network port is not exist in database of driver programing interface.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Unable to delete port(<InterfaceNumber>) entry from AVL tree: Does not exist
Debug
Access port is not exist in database of driver programing interface.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Unsupported tunnel type <TypeValue> specified!
Debug
Invalid or unsupported tunnel type specified.
<TypeValue> Type Value
USP <UnitID>.<SlotNumber>.<InterfaceNumber> is neither a LAG or phyiscal interface
Debug
Invalid or unsupported tunnel type specified.
<UnitID> Unit ID
<SlotNumber> Slot number
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
USP <UnitID>.<SlotNumber>.<InterfaceNumber> results in a NULL port ptr dapiPortPtr=<InterfaceNumber> hapiPortPtr=<InterfaceNumber>
Debug
Port is not exist in database of driver programing interface.
<UnitID> Unit ID
<SlotNumber> Slot number
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
VFI Tenant entry AVL delete failed. VFI=<IPAddress> Tenant=<ID>
December/2018 121
Message Collection
Debug
FUJITSU PSWITCH
Failed to delete tenant from database of driver programing interface.
<IPAddress> ip_address, or, ipv6_address, or hostname
<ID> ID
VFI Tenant entry AVL insert failed. VFI=<IPAddress> Tenant=<ID>
Debug
Insufficient resources while adding tenant to database in driver programing interface.
<IPAddress> ip_address, or, ipv6_address, or hostname
<ID> ID
VFI Tenant entry in delete did not exist. VFI=<IPAddress>
Tenant=<ID>
Debug
Tenant is not exist in database of driver programing interface.
<IPAddress> ip_address, or, ipv6_address, or hostname
<ID> ID
VFI Tenant entry mismatch on insert. VFI=<IPAddress>
NewTenant=<ID> OldTenant=<ID>
Debug
Configured tenant mismatch installed tenant in hardware.
<IPAddress> ip_address, or, ipv6_address, or hostname
<ID> ID
VFI Tenant Tenant(<ID>) NOT found.
Debug
Tenant is not exist in database of driver programing interface.
<ID> ID
Can't add a learnt entry when static enrty is available. This could indicate a race or an incorrect operational state. Static
Entry (MAC <MacAddress> tenant <ID> dstHandle <InterfaceNumber>) and leant entry has dstHandle <InterfaceNumber>. rc=<ErrorCode>
122 December/2018
FUJITSU PSWITCH
Error
Message Collection
Static tenant host already exists.
<MacAddress> MAC address
<ID> ID
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<ErrorCode>
0/1, 0/0/1
Error code
Can't add host <IPAddress> forwarding entry on interface
<InterfaceNumber>. Interface <InterfaceNumber> is already configured with maximum allowed (<SizeValue>) static host forwarding entries.
Error
Interface is already configured with maximum allowed static host forwarding entries.
<IPAddress> ip_address, or, ipv6_address, or hostname
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<SizeValue>
0/1, 0/0/1
An integer for a specific range or a limit value.
Can't add IP address <IPAddress> as local TEP to tenant <ID>, as tunnel type=<TypeValue> switch mode is not enabled.
Error
Tunnel mode is not enabled.
<IPAddress> ip_address, or, ipv6_address, or hostname
<ID>
<TypeValue>
ID
Type Value
Can't add IP address <IPAddress> as local TEP to tenant <ID>, as tunnel type <TypeValue> specified is not valid.
Error
Invalid or unsupported tunnel type specified.
<IPAddress> ip_address, or, ipv6_address, or hostname
<ID> ID
<TypeValue> Type Value
Can't add IP address <IPAddress> to tenant <ID>, as IP address specified is not valid.
December/2018 123
Message Collection
Error
FUJITSU PSWITCH
IP address specified is not a valid IPv4 address.
<IPAddress> ip_address, or, ipv6_address, or hostname
<ID> ID
Can't add specified IP address <IPAddress> as local TEP to tenant
<ID>, as IP address specified is not a valid local IP address.
Error
IP address specified is not a valid IPv4 address.
<IPAddress> ip_address, or, ipv6_address, or hostname
<ID> ID
Can't add specified IP address <IPAddress> as local TEP to tenant
<ID>, as service port IP address cannot be a valid local TEP.
Error
Service port IP address cannot be a valid local TEP.
<IPAddress> ip_address, or, ipv6_address, or hostname
<ID> ID
Can't add specified IP address <IPAddress> as local TEP to tenant
<ID>, as tenant entry is not found.
Error
Tenant is not found.
<IPAddress>
<ID> ip_address, or, ipv6_address, or hostname
ID
Can't add tenant <ID> remote host MAC <MacAddress>, as switch is already configured with maximum allowed (<SizeValue>) static remote tenant systems.
124 December/2018
FUJITSU PSWITCH
Error
Message Collection
Switch is already configured with maximum allowed static remote tenant systems.
<ID> ID
<MacAddress>
<SizeValue>
MAC address
An integer for a specific range or a limit value.
Can't add tenant <ID> remote host MAC <MacAddress>, as tenant is already configured with maximum allowed (<SizeValue>) static remote tenant systems.
Error
Tenant is already configured with maximum allowed static remote tenant systems.
<ID> ID
<MacAddress> MAC address
<SizeValue> An integer for a specific range or a limit value.
Can't add tenant <ID> system MAC <MacAddress> entry, as it already exists. rc <ErrorCode>
Error
Tenant host already exists.
<ID> ID
<MacAddress>
<ErrorCode>
MAC address
Error code
Can't add tenant <ID> system MAC <MacAddress> with destIntf
<InterfaceNumber> entry, as DCVPN forwarding fable is FULL! rc=<ErrorCode>
Error
Insufficient resources for DCVPN forwarding table.
<ID> ID
<MacAddress> MAC address
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<ErrorCode>
0/1, 0/0/1
Error code
Can't add tenant <ID> systen MAC <MacAddress> entry. Specified destination tunnel handle <InterfaceNumber> does not belong to specified tenant.
December/2018 125
Message Collection
Error
FUJITSU PSWITCH
Specified destination tunnel port does not belong to specified tenant.
<ID> ID
<MacAddress> MAC address
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Can't add VLAN <VlanID> to tenant <ID> with tunnel type <TypeValue>, as it already exists. rc = <ErrorCode>.
Error
Tenant already exists with VLAN.
<VlanID> VLAN ID
<ID>
<TypeValue>
<ErrorCode>
ID
Type Value
Error code
Can't add VLAN <VlanID> to tenant <ID> with tunnel type <TypeValue>, as tunnel type=<TypeValue> switch mode is not enabled.
Error
Tunnel mode is not enabled.
<VlanID> VLAN ID
<ID>
<TypeValue>
ID
Type Value
Can't add VLAN <VlanID> to tenant <ID>, as it is already configured with another VLAN <VlanID>.
Error
Tenant is already configured with another VLAN.
<VlanID> VLAN ID
<ID> ID
Can't add VLAN <VlanID> to tenant <ID>, as routing is enabled in
VLAN <VlanID>.
126 December/2018
FUJITSU PSWITCH
Error
Routing enabled VLAN is not allowed.
<VlanID> VLAN ID
<ID> ID
Message Collection
Can't add VLAN <VlanID> to tenant <ID>, as specified tunnel type
<TypeValue> is invalid.
Error
Invalid or unsupported tunnel type specified.
<VlanID> VLAN ID
<ID>
<TypeValue>
ID
Type Value
Can't add VLAN <VlanID> to tenant <ID>. Failed to get information of tenant <ID> with tunnel type <TypeValue>. rc = <ErrorCode>
Error
Tenant is not found.
<VlanID>
<ID>
<TypeValue>
<ErrorCode>
VLAN ID
ID
Type Value
Error code
Can't add VLAN <VlanID> to the tenant <ID>, as specified VLAN does not exist.
Error
VLAN is not exists in the request of adding VLAN to tenant.
<VlanID> VLAN ID
<ID> ID
Can't add VLAN to the tenant <ID>. VLAN <VlanID> specified is out of range <SizeValue> - <SizeValue>;
December/2018 127
Message Collection
Error
FUJITSU PSWITCH
VLAN Id is not valid in the request of adding VLAN to tenant.
<ID> ID
<VlanID>
<SizeValue>
VLAN ID
An integer for a specific range or a limit value.
Can't create access port for tenant <ID> in VLAN <VlanID>, as the interface <InterfaceNumber> is not a member of VLAN.
Error
VLAN membership check fail while creating access port.
<ID> ID
<VlanID> VLAN ID
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Can't create access port for tenant <ID> in VLAN <VlanID>, as the
VLAN is used for routing.
Error
Routing enabled VLAN is not allowed.
<ID> ID
<VlanID> VLAN ID
Can't create access port for tenant <ID> to match on interface
<InterfaceNumber>, as configuration exist already. access ID=<ID>.
Error
Tenant access port already exist.
<ID> ID
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Can't create access port for tenant <ID>, as specified interface
<InterfaceNumber> is not a valid type=<InterfaceType>.
128 December/2018
FUJITSU PSWITCH
Error
Message Collection
Interface is not valid type while creating access port.
<ID> ID
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<InterfaceType> "L7_PHYSICAL_INTF", "L7_STACK_INTF", "L7_CPU_INTF",
"L7_MAXPHYS_INTF_VALUE", "L7_LAG_INTF"...
Can't create access port for tenant <ID>, as specified interface
<InterfaceNumber> is not valid.
Error
Interface is not valid while creating access port.
<ID> ID
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Can't create access port for tenant <ID>, as the interface
<InterfaceNumber> is already acquired by routing.
Error
Routing enabled interface is not allowed.
<ID> ID
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Can't create access port for tenant <ID>, as the specified match type <TypeValue> on port is invalid.
Error
Match type is not valid in the request of creating access port.
<ID> ID
<TypeValue> Type Value
Can't create access port for tenant <ID>, as the VLAN <VlanID> specified is out of range <SizeValue> - <SizeValue>.
December/2018 129
Message Collection
Error
FUJITSU PSWITCH
VLAN Id is not valid in the request of creating access port.
<ID> ID
<VlanID>
<SizeValue>
VLAN ID
An integer for a specific range or a limit value.
Can't create access port on interface <InterfaceNumber> and VLAN
<VlanID> for tenant <ID>, tenant entry is not found.
Error
Tenant is not found.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<VlanID>
<ID>
VLAN ID
ID
Can't create access port on interface <InterfaceNumber> and VLAN
<VlanID> for tenant <ID>, VLAN is already assigned to tenant <ID>.
Error
VLAN is already assigned to another tenant.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<VlanID>
<ID>
VLAN ID
ID
Can't create tenant <ID> of tunnel type <TypeValue>, as it already exists. rc = <ErrorCode>
Error
DCVPN tenant already exists.
<ID> ID
<TypeValue> Type Value
<ErrorCode> Error code
Can't create tenant <ID>. Invalid or unsupported tunnel type
<TypeValue> specified.
130 December/2018
FUJITSU PSWITCH
Error
Invalid or unsupported tunnel type specified.
<ID> ID
<TypeValue> Type Value
Message Collection
Can't create tenant <ID>. Tenant <ID> already exists with other tunnel type <TypeValue>.
Error
Tenant already exists with other tunnel.
<ID> ID
<TypeValue> Type Value
Can't create tenant with ID=<ID>. Value specified is out of range.
Valid range is <SizeValue>-<SizeValue>.
Error
Tenant identifier is invalid.
<ID> ID
<SizeValue> An integer for a specific range or a limit value.
Can't create tenant with specified ID=<ID>, as it already exists.
Error
Tenant already exists.
<ID> ID
Can't create tunnel entry for remote TEP <IPAddress> and tenant
<ID>, as entry already exists, handle=<ID>.
Error
Tunnel entry already exists.
<IPAddress> ip_address, or, ipv6_address, or hostname
<ID> ID
Can't create tunnel for tenant <ID>, Tunnel type=<TypeValue> mode is not enabled.
December/2018 131
Message Collection
Error
Tunnel mode is not enabled.
<ID> ID
<TypeValue> Type Value
FUJITSU PSWITCH
Can't create tunnel for tenant <ID>. Invalid tunnel type
<TypeValue> specified.
Error
Invalid or unsupported tunnel type specified.
<ID> ID
<TypeValue> Type Value
Can't create tunnel for tenant <ID>. IP address <IPAddress> specified is not a valid IPv4 address.
Error
IP address specified is not a valid IPv4 address.
<ID> ID
<IPAddress> ip_address, or, ipv6_address, or hostname
Can't create tunnel for tenant <ID>. IP address <IPAddress> specified is not a valid remote TEP.
Error
IP address specified is not a valid remote TEP.
<ID> ID
<IPAddress> ip_address, or, ipv6_address, or hostname
Can't create tunnel for tenant <ID>. Local IP interface
(<InterfaceNumber>, rtIntf=<InterfaceNumber>) is not allowed as a remote TEP.
Error
Local IP interface IP address is not allowed as a remote TEP.
<ID> ID
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Can't create tunnel for tenant <ID>. Remote TEP specified
<IPAddress> is same as tenant Local TEP.
132 December/2018
FUJITSU PSWITCH
Error
Message Collection
Remote TEP specified is same as tenant Local TEP.
<ID> ID
<IPAddress> ip_address, or, ipv6_address, or hostname
Can't create tunnel for tenant <ID>. Service port IP address
<IPAddress> cannot be configured for a remote TEP.
Error
Service port IP address cannot be configured for a remote TEP.
<ID> ID
<IPAddress> ip_address, or, ipv6_address, or hostname
Can't create tunnel to remote TEP <IPAddress> for tenant <ID>.
Maximum supported unique remote TEPs limit (<SizeValue>) reached.
Error
Maximum supported unique remote TEPs limit reached.
<IPAddress> ip_address, or, ipv6_address, or hostname
<ID>
<SizeValue>
ID
An integer for a specific range or a limit value.
Can't delete tenant <ID> system MAC <MacAddress> entry, as it is not found in database.
Error
Tenant host Is not found.
<ID> ID
<MacAddress> MAC address
Can't delete tenant <ID>, as it does not exist. rc = <ErrorCode>
Error
Tenant is not found.
<ID>
<ErrorCode>
ID
Error code
Can't delete the tenant <ID> tunnel id <ID>, as failure occurred while unregistering with RTO for remote TEP <IPAddress>. rc =
<ErrorCode>
December/2018 133
Message Collection
Error
FUJITSU PSWITCH
Failed to unregister with RTO for remote TEP.
<ID> ID
<IPAddress>
<ErrorCode> ip_address, or, ipv6_address, or hostname
Error code
Can't install access port <InterfaceNumber>, as access port entry is not found.
Error
Access port entry is not found.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Can't remove tenant <ID> tunnel <ID> to remote TEP <IPAddress>, as remote TEP operational entry delete failed. rc = <ErrorCode>
Error
Failed to delete remote TEP operational entry.
<ID> ID
<IPAddress> ip_address, or, ipv6_address, or hostname
<ErrorCode> Error code
Can't remove tenant <ID> VLAN, as tenant entry is not found.
Error
Tenant entry does not exist.
<ID> ID
Can't remove VLAN association with tenant <ID>, as tenant entry get failed. rc = <ErrorCode>
Error
Tenant is not found.
<ID>
<ErrorCode>
ID
Error code
Can't remove VLAN association with tenant <ID>. Tenant is not configured with any VLAN.
134 December/2018
FUJITSU PSWITCH
Error
Tenant is not configured with any VLAN.
<ID> ID
Message Collection
Can't uninstall access port <InterfaceNumber>, as specified access port not found
Error
Specified access port not found.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Can't update tenant <ID> with specified IP address <IPAddress> as local TEP, as it is already configured.
Error
Tenant with specified IP address is already configured.
<ID> ID
<IPAddress> ip_address, or, ipv6_address, or hostname
Cannot add tenant <ID> system MAC <MacAddress> entry, as specified destination access port <InterfaceNumber> does not belong to specified Tenant.
Error
Specified destination access port does not belong to specified tenant.
<ID> ID
<MacAddress> MAC address
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Cannot register for Next Hop changes with RTO. Unable to find DCVPN tunnel remote TEP <IPAddress> entry.
December/2018 135
Message Collection
Error
FUJITSU PSWITCH
DCVPN tunnel remote TEP is not found while registering, unregistering with RTO for next hop address resolution changes.
<IPAddress> ip_address, or, ipv6_address, or hostname
DCVPN L2 callback: Failed to post L2 address event <EventID> to application. Dropping entry (MAC <MacAddress> destHandle
<InterfaceNumber>). rc = <ErrorCode>
Error
Failed to send l2 address event message.
<EventID> Event ID
<MacAddress> MAC address
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<ErrorCode>
0/1, 0/0/1
Error code
dcVpnMsgQueue is not initialized!
Error
DCVPN configurator message queue is not initialized.
Deleting tenant <ID> host <IPAddress> forwarding entry failed.
Failed to get access port <InterfaceNumber> information. rc =
<ErrorCode>
Error
Access port is not found.
<ID> ID
<IPAddress> ip_address, or, ipv6_address, or hostname
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<ErrorCode>
0/1, 0/0/1
Error code
ERROR : failed to delete tunnel <ID> not present
136 December/2018
FUJITSU PSWITCH
Error
Tunnel entry is not found.
<ID> ID
Message Collection
ERROR : Failed to modify tunnel <ID>. Modify operation is not permitted for specified tunnel type.
Error
Modify operation is not permitted for specified tunnel type.
<ID> ID
ERROR : Failed to modify tunnel <ID>. Tunnel handle not found!
Error
Tunnel entry is not found.
<ID> ID
Error flushing FBD entries for VLAN <VlanID> on intIfNum
<InterfaceNumber> while creating access port.
Error
Error flushing FBD entries for VLAN on access port.
<VlanID> VLAN ID
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Error occurred while deleting tunnel id <ID> from driver. Failed to re-enable learning on the shared tunnel port. Entry Info: Tenant
<ID> local TEP <IPAddress> and peer TEP <IPAddress>. rc=<ErrorCode>
Error
Failed to re-enable learning on the shared tunnel port.
<ID> ID
<IPAddress>
<ErrorCode> ip_address, or, ipv6_address, or hostname
Error code
Error! Failed to delete access port/s for tenant <ID> of tunnel type <TypeValue>. rc = <ErrorCode>
December/2018 137
Message Collection
Error
Failed to delete access port/s for tenant of tunnel.
<ID> ID
<TypeValue>
<ErrorCode>
Type Value
Error code
FUJITSU PSWITCH
Failed multiple times to install tunnel <ID> in the driver. Max allowed retries <CountValue> reached. User intervention is needed.
Try to recreate the tunnel or look for more possible HW issues.
Error
Failed multiple times to install tunnel in the driver.
<ID> ID
<CountValue> Count Value
Failed to <Operation> tenant system MAC <MacAddress> entry in driver with destination ifNum <InterfaceNumber> for Tenant <ID>. rc <ErrorCode>.
Error
Failed to add, or update tenant system MAC entry in driver.
<Operation>
<MacAddress>
Operation, "Add", "Remove", "Up", "Down", "Enable",
"Disable" …
MAC address
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<ID>
<ErrorCode>
0/1, 0/0/1
ID
Error code
Failed to activate DCVPN interface <InterfaceNumber>, as interface event <EventID>(<EventID>) processing has failed. ret=<ErrorCode>
138 December/2018
FUJITSU PSWITCH
Error
Message Collection
Interface event processing has failed.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<EventID>
<ErrorCode>
0/1, 0/0/1
Event ID
Error code
Failed to add <StaticOrLearn> tenant <ID> system MAC <MacAddress> entry, as specified destination access port handle
<InterfaceNumber> is not found.
Error
Specified destination access port is not found.
<StaticOrLearn> String; "Static", "Learned"
<ID> ID
<MacAddress> MAC address
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to add <StaticOrLearn> tenant <ID> system MAC <MacAddress> entry, as specified tenant is not found.
Error
Tenant is not found.
<StaticOrLearn>
<ID>
<MacAddress>
String; "Static", "Learned"
ID
MAC address
Failed to add dynamic L2 entry. Entry: tenant <ID> MAC
<MacAddress> intf <InterfaceNumber>. rc=<ErrorCode>
Error
Failed to add dynamic L2 entry.
<ID> ID
<MacAddress> MAC address
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<ErrorCode> Error code
Failed to add host forwarding entry for tenant <ID>, as MAC address
<MacAddress> specified is invalid.
December/2018 139
Message Collection
Error
MAC address is invalid.
<ID>
<MacAddress>
ID
MAC address
FUJITSU PSWITCH
Failed to add host MAC <MacAddress> entry for Tenant <ID> with specified tunnel type=<TypeValue>, as switch tunnel type=<TypeValue> mode is not enabled.
Error
Tunnel mode is not enabled.
<MacAddress> MAC address
<ID> ID
<TypeValue> Type Value
Failed to add next hop to tunnel <ID>. newNH (MAC <MacAddress>, intf <InterfaceNumber>). rc = <ErrorCode>.
Error
Failed to add next hop to tunnel.
<ID> ID
<MacAddress> MAC address
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<ErrorCode>
0/1, 0/0/1
Error code
Failed to add static tenant <ID> system MAC <MacAddress> entry, as get current number of static host entries on interface
<InterfaceNumber> has failed. rc=<ErrorCode>
Error
Failed to get current number of static host entries on interface.
<ID> ID
<MacAddress> MAC address
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<ErrorCode>
0/1, 0/0/1
Error code
Failed to add tenant <ID> forwarding entry MAC <MacAddress>, as the specified destintation <InterfaceNumber> tunnel entry is not found.
140 December/2018
FUJITSU PSWITCH
Error
Message Collection
Specified destintation tunnel entry is not found.
<ID> ID
<MacAddress> MAC address
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to add tenant system forwarding entry, as the destintation interface <InterfaceNumber> specified is not valid.
Error
The destintation interface specified is not valid.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to add tenant system MAC <MacAddress> entry in driver for
Tenant <ID> with destination <InterfaceNumber>. Installed
<TrueOrFalse> rc <ErrorCode>
Error
Failed to add tenant system MAC entry in driver.
<MacAddress> MAC address
<ID> ID
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<TrueOrFalse>
<ErrorCode>
String; "True", "False"
Error code
Failed to add tenant system MAC entry as a duplicate entry already exists! Entry: MAC <MacAddress> tenant <ID> dest ifNum
<InterfaceNumber>. rc <ErrorCode>.
Error
A duplicate entry already exists.
<MacAddress> MAC address
<ID> ID
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<ErrorCode>
0/1, 0/0/1
Error code
Failed to add tunnel <ID> next hop. NH : MAC <MacAddress>, intf
<InterfaceNumber>. rc = <ErrorCode>.
December/2018 141
Message Collection
Error
FUJITSU PSWITCH
Failed to add tunnel next hop.
<ID> ID
<MacAddress> MAC address
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<ErrorCode>
0/1, 0/0/1
Error code
Failed to add VLAN <VlanID> to tenant <ID>, tenant entry does not exist. rc = <ErrorCode>
Error
Tenant entry does not exist.
<VlanID> VLAN ID
<ID> ID
<ErrorCode> Error code
Failed to add VLAN <VlanID> to tenant <ID>. Failed to create access port on interface <InterfaceNumber> with match_type
<VlanPortOrNot>. rc = <ErrorCode>
Error
Failed to create access port on interface with specified match type.
<VlanID> VLAN ID
<ID> ID
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<VlanPortOrNot> Classify packet based on 1(incoming port PVID), or
2(incoming port/dot1q VLAN ID)
<ErrorCode> Error code
Failed to apply DCVPN interface configuration on interface
<InterfaceNumber>. rc <ErrorCode>
Error
Failed to apply DCVPN interface configuration on interface.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<ErrorCode>
0/1, 0/0/1
Error code
Failed to clear counter for tunnel <ID> rc <ErrorCode>
142 December/2018
FUJITSU PSWITCH
Error
Failed to clear counter for the tunnel.
<ID> ID
<ErrorCode> Error code
Message Collection
Failed to configure NVGRE tunnel mode. Disable VXLAN tunnel mode to configure NVGRE mode.
Error
Only one tunnel mode can be enabled on the switch.
Failed to configure tunnel mode, as specified tunnel type is invalid or unsupported specified.
Error
Specified tunnel type is invalid or unsupported.
Failed to configure VXLAN tunnel mode. Disable NVGRE tunnel mode to configure VXLAN mode.
Error
Only one tunnel mode can be enabled on the switch.
Failed to configure VXLAN UDP port. VXLAN is not supported on this device.
Error
VXLAN is not supported on this device.
Failed to configure VXLAN UDP port. VXLAN tunnel mode is not enabled.
Error
VXLAN tunnel mode is not enabled.
Failed to create access port for tenant <ID> on interface
<InterfaceNumber>, as it failed to clean up interface
<InterfaceNumber> operational Db entry. rc = <ErrorCode>
December/2018 143
Message Collection
Error
FUJITSU PSWITCH
Failed to clean up operational access port database.
<ID> ID
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<ErrorCode> Error code
Failed to create access port for tenant <ID> on interface
<InterfaceNumber>, as it failed to update interface
<InterfaceNumber> operational Db entry. rc = <ErrorCode>
Error
Failed to update operational access port database.
<ID> ID
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<ErrorCode>
0/1, 0/0/1
Error code
Failed to create access port for tenant <ID> on interface
<InterfaceNumber>, as it failed while creating operational interface (<InterfaceNumber>) entry. rc = <ErrorCode>
Error
Failed to create operational access port.
<ID> ID
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<ErrorCode> Error code
Failed to create tenant <ID> of tunnel type <TypeValue> in the hardware. rc = <ErrorCode>
Error
Failed to create DCVPN tenant in hardware.
<ID> ID
<TypeValue>
<ErrorCode>
Type Value
Error code
Failed to create tenant <ID> of tunnel type <TypeValue>. Tenant table is full. rc = <ErrorCode>
144 December/2018
FUJITSU PSWITCH
Error
Insufficient resources while creating DCVPN tenant.
<ID> ID
<TypeValue>
<ErrorCode>
Type Value
Error code
Message Collection
Failed to create tenant <ID> with specified tunnel type=<TypeValue>, as switch tunnel type=<TypeValue> mode is not enabled.
Error
Tunnel mode is not enabled.
<ID> ID
<TypeValue> Type Value
Failed to create tunnel for tenant <ID>. Specified tenant is not found.
Error
Specified tenant is not found.
<ID> ID
Failed to create tunnel to remote TEP <IPAddress> for tenant <ID>.
Free index get failed. rc=<ErrorCode>
Error
Insufficient resources while creating tunnel entry.
<IPAddress> ip_address, or, ipv6_address, or hostname
<ID> ID
<ErrorCode> Error code
Failed to create tunnel to remote TEP <IPAddress> for tenant
<ID>.Tunnel entry insert failed. Tunnel table is FULL.
Error
Insufficient resources for tunnel entry.
<IPAddress> ip_address, or, ipv6_address, or hostname
<ID> ID
Failed to create tunnel type <TypeValue> to remote TEP <IPAddress> for tenant <ID>. rc=<ErrorCode>
December/2018 145
Message Collection
Error
FUJITSU PSWITCH
Failed to create tunnel to remote TEP for tenant.
<TypeValue> Type Value
<IPAddress>
<ID>
<ErrorCode> ip_address, or, ipv6_address, or hostname
ID
Error code
Failed to deactivate DCVPN interface <InterfaceNumber>, as interface event <EventID>(<EventID>) processing has failed. ret=<ErrorCode>
Error
Interface event processing has failed.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<EventID>
<ErrorCode>
Event ID
Error code
Failed to delete access port <InterfaceNumber> of tenant <ID>.
Interface <InterfaceNumber> reference count failed while clean up. rc = <ErrorCode>
Error
Failed to clean up operational access port database.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<ID>
<ErrorCode>
0/1, 0/0/1
ID
Error code
Failed to delete access port <InterfaceNumber> of tenant <ID>.
Interface <InterfaceNumber> reference count get failed. rc =
<ErrorCode>
146 December/2018
FUJITSU PSWITCH
Error
Message Collection
Failed to get operational access port database.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<ID>
<ErrorCode>
0/1, 0/0/1
ID
Error code
Failed to delete access port from driver. Entry Info: accessId <ID> tenant <ID> interface <InterfaceNumber> vlanId <VlanID> match type
<TypeValue>. rc <ErrorCode>.
Error
Failed to delete access port from driver.
<ID> ID
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<VlanID>
<TypeValue>
<ErrorCode>
0/1, 0/0/1
VLAN ID
Type Value
Error code
Failed to delete access port with handle <InterfaceNumber>. rc =
<ErrorCode>
Error
Failed to delete access port.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<ErrorCode> Error code
Failed to delete access port/s for tenant <ID> of tunnel type
<TypeValue>. rc = <ErrorCode>
Error
Failed to delete access port/s for tenant of tunnel.
<ID> ID
<TypeValue>
<ErrorCode>
Type Value
Error code
Failed to delete dynamic L2 entry. Entry: tenant <ID> MAC
<MacAddress> intf <InterfaceNumber>. rc=<ErrorCode>
December/2018 147
Message Collection
Error
FUJITSU PSWITCH
Failed to delete dynamic L2 entry.
<ID> ID
<MacAddress> MAC address
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<ErrorCode>
0/1, 0/0/1
Error code
Failed to delete learnt tenant system <MacAddress> entry from driver.Entry Info: Tenant <ID> port handle <ID>. rc <ErrorCode>
Error
Failed to delete learnt tenant system entry from driver.
<MacAddress> MAC address
<ID> ID
<ErrorCode> Error code
Failed to delete next hop of tunnel <ID>. newNH (MAC <MacAddress>, intf <InterfaceNumber>). rc = <ErrorCode>.
Error
Failed to delete next hop of tunnel.
<ID> ID
<MacAddress> MAC address
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<ErrorCode>
0/1, 0/0/1
Error code
Failed to delete pending next hop of the tunnel <ID>. NH (MAC
<MacAddress>, intf <InterfaceNumber>). rc = <ErrorCode>.
Error
Failed to delete pending next hop of the tunnel.
<ID> ID
<MacAddress> MAC address
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<ErrorCode> Error code
Failed to delete static tenant system <MacAddress> entry from driver. Entry Info: Tenant <ID> port handle <InterfaceNumber>. rc
<ErrorCode>
148 December/2018
FUJITSU PSWITCH
Error
Message Collection
Failed to delete static tenant system entry from driver.
<MacAddress> MAC address
<ID> ID
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<ErrorCode>
0/1, 0/0/1
Error code
Failed to delete tenant <ID> access port <InterfaceNumber> on interface <InterfaceNumber> in VLAN <VlanID>. rc = <ErrorCode>
Error
Failed to delete tenant access port on interface in VLAN.
<ID> ID
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<VlanID>
<ErrorCode>
0/1, 0/0/1
VLAN ID
Error code
Failed to delete tenant <ID> host <MacAddress> fowarding entry from driver. Entry Info: Static <YesOrNo> DestIntf
<InterfaceNumber> Installed <YesOrNo>. rc <ErrorCode>
Error
Failed to delete tenant host fowarding entry from driver.
<ID> ID
<MacAddress> MAC address
<YesOrNo> "Yes" or "No"
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<ErrorCode>
0/1, 0/0/1
Error code
Failed to delete tenant <ID> of tunnel type <TypeValue>, as specified tenant is not found. rc = <ErrorCode>
December/2018 149
Message Collection
Error
DCVPN tenant is not found while deleting tenant.
<ID> ID
<TypeValue>
<ErrorCode>
Type Value
Error code
FUJITSU PSWITCH
Failed to delete tenant <ID> of tunnel type <TypeValue>, from hardware. rc = <ErrorCode>
Error
Failed to delete DCVPN tenant from hardware.
<ID> ID
<TypeValue> Type Value
<ErrorCode> Error code
Failed to delete tenant <ID> tunnels of type <TypeValue>. rc =
<ErrorCode>
Error
Failed to delete tenant tunnels.
<ID> ID
<TypeValue>
<ErrorCode>
Type Value
Error code
Failed to delete tenant system <InterfaceNumber> entry from driver.
Entry Info: Tenant <ID> port handle <InterfaceNumber>. rc
<ErrorCode>
Error
Failed to delete tenant system entry from driver.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<ID>
<ErrorCode>
0/1, 0/0/1
ID
Error code
Failed to delete tunnel <ID> next hop. NH : MAC <MacAddress> intf
<InterfaceNumber>. rc = <ErrorCode>.
150 December/2018
FUJITSU PSWITCH
Error
Message Collection
Failed to delete tunnel next hop.
<ID> ID
<MacAddress> MAC address
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<ErrorCode>
0/1, 0/0/1
Error code
failed to delete tunnel <ID> type <TypeValue> rc <ErrorCode>
Error
Failed to delete tunnel.
<ID>
<TypeValue>
<ErrorCode>
ID
Type Value
Error code
Failed to get default tunnel entry configuration. Invalid or unsupported tunnel type <TypeValue> specified.
Error
Invalid or unsupported tunnel type specified.
<TypeValue> Type Value
Failed to get tunnel mode, as specified tunnel type <TypeValue> is invalid or unsupported.
Error
Specified tunnel type is invalid or unsupported.
<TypeValue> Type Value
Failed to get VXLAN UDP port. VXLAN is not supported on this device.
Error
VXLAN is not supported on this device.
Failed to install access port <InterfaceNumber> in h/w. Entry
Info: Tenant <ID> interface <InterfaceNumber> VLAN <VlanID> tagged
<TagValue> match type <VlanPortOrNot>.
December/2018 151
Message Collection
Error
FUJITSU PSWITCH
Failed to install access port in h/w.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<ID>
<VlanID>
<TagValue>
<VlanPortOrNot>
0/1, 0/0/1
ID
VLAN ID
Tag value
Classify packet based on 1(incoming port PVID), or
2(incoming port/dot1q VLAN ID)
Failed to install static entries in driver, as port handle <ID> is either not found or invalid. rc <ErrorCode>
Error
Application port is either not found or invalid.
<ID> ID
<ErrorCode> Error code
Failed to install tenant system <ID> in driver. Entry Info: Tenant
<ID> port handle <ID> dropMode <YesOrNo>. rc=<ErrorCode>
Error
Failed to install tenant system in driver.
<ID> ID
<YesOrNo> "Yes" or "No"
<ErrorCode> Error code
Failed to issue cnfgr cmd <Command> request <State>.
Error
Failed to send DCVPN message.
<Command> Command
<State> State
Failed to modify tunnel UDP port with VXLAN UDP port <IPPortNumber>, as tunnel entry for specified handle is not found!
152 December/2018
FUJITSU PSWITCH
Error
Tunnel entry is not found.
<IPPortNumber> UDP or TCP port number, ex:8000, 21
Message Collection
Failed to modify tunnel <ID> with VXLAN UDP port <IPPortNumber>, as the driver returned failure. rc <ErrorCode>
Error
Failed to modify tunnel with VXLAN UDP port in driver.
<ID> ID
<IPPortNumber> UDP or TCP port number, ex:8000, 21
<ErrorCode> Error code
Failed to process driver access port status event for appPortId
<ID>. Access port specified does not exists.
Error
Access port specified does not exists.
<ID> ID
Failed to process <EventName>(<EventID>) on interface
<InterfaceNumber>, as DCVPN interface configuration apply as failed. ret=<ErrorCode>
Error
DCVPN interface configuration apply as failed.
<EventName> Event name
<EventID> Event ID
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<ErrorCode>
0/1, 0/0/1
Error code
Failed to process event <EventName>(<EventID>) on interface
<InterfaceNumber>, as DCVPN interface configuration remove as failed. ret=<ErrorCode>
December/2018 153
Message Collection
Error
FUJITSU PSWITCH
DCVPN interface configuration remove as failed.
<EventName> Event name
<EventID> Event ID
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<ErrorCode>
0/1, 0/0/1
Error code
Failed to register DCVPN remote TEP <IPAddress> with RTO for next hop address resolution changes. rc = <ErrorCode>
Error
Failed to register with RTO for next hop address resolution changes.
<IPAddress> ip_address, or, ipv6_address, or hostname
<ErrorCode> Error code
Failed to remove dynamic entries from driver, as the port handle
<ID> is either not valid or not found. rc <ErrorCode>
Error
Application port is either not found or invalid.
<ID> ID
<ErrorCode> Error code
Failed to remove tenant <ID> tunnel <ID> to remote TEP <IPAddress>, as remote TEP operational entry is not found.
Error
Remote TEP operational entry is not found.
<ID> ID
<IPAddress> ip_address, or, ipv6_address, or hostname
Failed to remove tunnel id <ID> from driver. Entry Info: Tenant
<ID> local TEP <IPAddress> remote TEP <IPAddress>. rc <ErrorCode>
154 December/2018
FUJITSU PSWITCH
Error
Message Collection
Failed to remove tunnel from driver.
<ID> ID
<IPAddress>
<ErrorCode> ip_address, or, ipv6_address, or hostname
Error code
Failed to remove VLAN <VlanID> association with tenant <ID>, as failure occurred while clearing the tenant access port/s. rc =
<ErrorCode>
Error
Failed to clear the tenant access port/s.
<VlanID> VLAN ID
<ID>
<ErrorCode>
ID
Error code
Failed to resolve the tunnel <ID> as the outgoing interface of the next hop <InterfaceNumber> could not be derived since MAC
<MacAddress> VLAN <VlanID> entry is not found in FDB table.
Error
(MAC, VLAN) entry is not found in FDB table.
<ID> ID
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<MacAddress>
<VlanID>
MAC address
VLAN ID
Failed to send event notification message to DCVPN thread.
Error
Failed to send DCVPN message.
Failed to set static forwarding entries to drop mode in driver, as the port handle <ID> is either not found or invalid. rc
<ErrorCode>
December/2018 155
Message Collection
Error
Application port is either not found or invalid.
<ID> ID
<ErrorCode> Error code
FUJITSU PSWITCH
Failed to uninstall access port <ID> from h/w. Entry Info: Tenant
<ID> interface <InterfaceNumber> VLAN <VlanID> tagged <TagMode> match type <TypeValue>.
Error
Failed to uninstall access port from h/w.
<ID> ID
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<VlanID>
<TagMode>
<TypeValue>
0/1, 0/0/1
VLAN ID
Tag mode
Type Value
Failed to uninstall static entries from driver, as port handle <ID> is either not found or invalid. rc <ErrorCode>
Error
Application port is either not found or invalid.
<ID> ID
<ErrorCode> Error code
Failed to Unregister DCVPN remote TEP <IPAddress> with RTO for next hop address resolution changes. rc = <ErrorCode>
Error
Failed to unregister with RTO for next hop address resolution changes.
<IPAddress> ip_address, or, ipv6_address, or hostname
<ErrorCode> Error code
Failed to update next hop of the tunnel <ID> in port change. oldNH
(MAC <MacAddress>, intf <InterfaceNumber>) newNH (MAC <MacAddress>, intf <InterfaceNumber>). rc = <ErrorCode>.
156 December/2018
FUJITSU PSWITCH
Error
Message Collection
Failed to update next hop of the tunnel in port change.
<ID> ID
<MacAddress> MAC address
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<ErrorCode>
0/1, 0/0/1
Error code
Failed to update next hop of the tunnel <ID>. oldNH (MAC
<MacAddress>, intf <InterfaceNumber>) newNH (MAC <MacAddress>, intf <InterfaceNumber>). rc = <ErrorCode>.
Error
Failed to update next hop of the tunnel.
<ID> ID
<MacAddress> MAC address
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<ErrorCode>
0/1, 0/0/1
Error code
Installing tunnel <ID> in driver failed! Current retry count
<CountValue>. rc=<ErrorCode>
Error
Failed to reinstall tunnel in the driver.
<ID> ID
<CountValue> Count Value
<ErrorCode> Error code
Invalid event <DcvpnEvent> received.
Error
Invalid DCVPN event.
<DcvpnEvent> DCVPN_CNFGR_EVENT, DCVPN_PKT_EVENT,
DCVPN_VLAN_EVENT ...
Invalid interface <InterfaceNumber> event <EventName>(<EventID>) received. Event cannot be handled!
December/2018 157
Message Collection
Error
FUJITSU PSWITCH
Invalid interface event.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<EventName>
<EventID>
0/1, 0/0/1
Event name
Event ID
Invalid Tunnel Type <TypeValue>
Error
Invalid or unsupported tunnel type specified.
<TypeValue> Type Value
pTunnelIndexMappingTable[<ID>] is NULL. Failed to delete tunnel with tunnel handle <ID>. This could be an indication of inconsistant state.
Error
An indication of inconsistant state.
<ID> ID
Tunnel ID <ID> - DTL failed to get CPU interface information.
Overlay tunnel cannot be installed.
Error
Failed to get CPU interface information.
<ID> ID
Tunnel port <ID> delete failed for tenant <ID>. rc = <ErrorCode>
Error
Failed to delete tunnel.
<ID>
<ErrorCode>
ID
Error code
Unable to process L2 entry (MAC <MacAddress> Intf
<InterfaceNumber>) event <EventID> as the interface handle is not valid.
158 December/2018
FUJITSU PSWITCH
Error
Message Collection
The interface handle is not valid.
<MacAddress> MAC address
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<EventID> Event ID
Unknown event <DcvpnEvent> in message
Error
Invalid DCVPN event.
<DcvpnEvent> DCVPN_CNFGR_EVENT, DCVPN_PKT_EVENT,
DCVPN_VLAN_EVENT ...
VXLAN UDP port number passed is out of range. Valid range is
<MinValue>-<MaxValue>.
Error
VXLAN UDP port number is invalid.
<MinValue> Minimum value
<MaxValue> Maximum value
<TypeValue> tunnel from <IPAddress> to <IPAddress> created successfully in hardware.
Informational
Tunnel between two TEPs created successfully in hardware.
<TypeValue> Type Value
<IPAddress> ip_address, or, ipv6_address, or hostname
<TypeValue> tunnel from <IPAddress> to <IPAddress> is removed successfully from hardware.
Informational
Tunnel between two TEPs removed successfully from hardware.
<TypeValue> Type Value
<IPAddress> ip_address, or, ipv6_address, or hostname
dcVpnIntfChangeHandle: Received an interface change callback while not ready to receive it
December/2018 159
Message Collection
Informational
DCVPN is not ready.
FUJITSU PSWITCH
Failed to create DCVPN message queue for dcVpnFdbRefreshTask
Informational
Failed to create DCVPN message queue for dcVpnFdbRefreshTask.
Received an interface change callback while not ready to receive it
Informational
DCVPN is not ready.
Removed all tenant system's forwarding entries for access port
<InterfaceNumber> on interface <InterfaceNumber> and VLAN
<VlanID>.
Informational
Removed all installed tenant system's forwarding entries for access port on interface and VLAN.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<VlanID> VLAN ID
Tech Support Registration failed for DCVPN related commands
Informational
Unable to register with tech support.
Invalid key length in dcvpnTenantDbEntryCompare()
Notice
The length of compared entry is invalid.
2.1.11.
DENIAL_OF_SERVICE
DoS Create Startup done
160 December/2018
FUJITSU PSWITCH
Debug
DoS component startup done.
Message Collection
Sending Interface[<InterfaceNumber>] Change event to dosQueue failed
Debug
Sending Change event to dos component queue failed.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
DoS Attack alert msg queue full, rc = <ErrorCode>
Error
DoS component alert msg queue full.
<ErrorCode> Error code
DoS Attack alert msg send failed, rc = <ErrorCode>
Error
DoS component alert msg send failed.
<ErrorCode> Error code
Unable to register to DTL for Dos attack notification
Error
Unable to register to DTL for DoS component.
Could not create task dosTask
Informational
Could not create DoS component task.
DOS: Unable to register with NIM
Informational
Unable to register DoS component with NIM.
doSCnfgrInitPhase1Process: could not allocate memory to dosMapTbl.
December/2018 161
Message Collection
Informational
could not allocate memory to DoS component.
FUJITSU PSWITCH
doSCnfgrInitPhase1Process: msgQueue creation error.
Informational
DoS component message queue creation error.
doSCnfgrInitPhase1Process: Task could not be started.
Informational
Task could not be started.
doSCnfgrInitPhase1Process: Unable to create r/w lock for
DOSCONTROL
Informational
Unable to create r/w lock for DOSCONTROL.
Error accessing DOS config data for interface <InterfaceNumber> in dosMapIntfIsConfigurable.
Informational
Error accessing DOS config data for interface.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Error on call to osapiFsWrite routine on config file <FileName>
Informational
Error on call to write config file.
<FileName> Log is created by this file.
Failure in setting system ICMP DOS maximum ICMP size to
<SizeValue>.
162 December/2018
FUJITSU PSWITCH
Informational
Message Collection
Failure in setting system ICMP DOS maximum ICMP size.
<SizeValue> An integer for a specific range or a limit value.
Failure in setting system ICMP fragment DOS mode to <State>.
Informational
Failure in setting system ICMP fragment DOS mode.
<State> State
Failure setting system First Fragment DoS mode to <State>
Informational
Failure setting system First Fragment DoS mode.
<State> State
Failure setting system ICMP DoS mode to <State>
Informational
Failure setting system ICMP DoS mode.
<State> State
Failure setting system ICMP Fragment DoS mode to <State>
Informational
Failure setting system ICMP Fragment DoS mode.
<State> State
Failure setting system ICMPv4 DoS mode to <State>
Informational
Failure setting system ICMPv4 DoS mode.
<State> State
Failure setting system ICMPv6 DoS mode to <State>
December/2018 163
Message Collection
Informational
Failure setting system ICMPv6 DoS mode.
<State> State
FUJITSU PSWITCH
Failure setting system L4 Port DoS mode to <State>
Informational
Failure setting system L4 Port DoS mode.
<State> State
Failure setting system Offset DoS mode to <State>
Informational
Failure setting system Offset DoS mode.
<State> State
Failure setting system SIP=DIP DoS mode to <State>
Informational
Failure setting system SIP=DIP DoS mode.
<State> State
Failure setting system SMAC=DMAC DoS mode to <State>
Informational
Failure setting system SMAC=DMAC DoS mode.
<State> State
Failure setting system TCP FIN/URG/PSH DoS mode to <State>
Informational
Failure setting system TCP FIN/URG/PSH DoS mode to.
<State> State
Failure setting system TCP Flag DoS mode to <State>
164 December/2018
FUJITSU PSWITCH
Informational
Failure setting system TCP Flag DoS mode.
<State> State
Message Collection
Failure setting system TCP Flag&Sequence DoS mode to <State>
Informational
Failure setting system TCP Flag&Sequence DoS mode.
<State> State
Failure setting system TCP Fragment DoS mode to <State>
Informational
Failure setting system TCP Fragment DoS mode.
<State> State
Failure setting system TCP Port DoS mode to <State>
Informational
Failure setting system TCP Port DoS mode.
<State> State
Failure setting system TCP SYN DoS mode to <State>
Informational
Failure setting system TCP SYN DoS mode.
<State> State
Failure setting system TCP SYN/FIN DoS mode to <State>
Informational
Failure setting system TCP SYN/FIN DoS mode.
<State> State
Failure setting system UDP Port DoS mode to <State>
December/2018 165
Message Collection
Informational
Failure setting system UDP Port DoS mode.
<State> State
FUJITSU PSWITCH
Received an interface change callback while not ready to receive it
Informational
DoS component interface change callback not ready.
Unable to initialize dosTask()
Informational
Unable to initialize DoS component Task.
2.1.12.
DHCP_CLIENT
Dhcp Client Task Creation Failed
Critical
Create DHCP client task failed
DHCP registrar ID <ComponentID> greater than Last Component ID
Error
Input function component ID over last compenent ID
<ComponentID> Component ID
DHCP registrar ID <ComponentID>, <ComponentName> already registered
Error
DHCP client notify callback already exist
<ComponentID> Component ID
<ComponentName> Component name
Got NULL as parameter
166 December/2018
FUJITSU PSWITCH
Error
Input function parameter invalid
Invalid DHCP registrar ID <ComponentID>
Error
Input function component ID over last compenent ID
<ComponentID> Component ID
Message Collection
Option 125. At least one option should be described!
Error
DHCP packet option 125 sub-option not found
Option 125. Suboption length is more than allowed!
Error
DHCP packet option 125 sub-option oversize
Option 125: Vendor ID field missed!
Error
Parse DHCP packet option 125 not found vendor ID field
<FunctionName> : Tag already set with size(<SizeValue>)
Informational
DHCP packet option cannot insert when DHCP packet option already
<FunctionName> Log is created by this function.
<SizeValue> An integer for a specific range or a limit value.
<FunctionName> : Unsupported DHCP Option to set
Informational
DHCP option cannot insert when DHCP option unsupport
<FunctionName> Log is created by this function.
<FunctionName> :Oversize DHCP packet
December/2018 167
Message Collection
Informational
DHCP packet oversize
<FunctionName> Log is created by this function.
FUJITSU PSWITCH
<FunctionName> :Oversize DHCP packet with option(<TagValue>) append of len(<LengthValue>)
Informational
DHCP append option oversize
<FunctionName> Log is created by this function.
<TagValue> Tag value
<LengthValue> ipv6 prefix length
<FunctionName>: Unsupported DHCP option requested for extraction
Informational
Getting unsupported option from DHCP packet
<FunctionName> Log is created by this function.
<FunctionName>: Unsupported subOption(<TagValue>) in
VendorSpecific Option in received DHCP pkt
Informational
Received DHCP packet include unsupported sub-option in vendor specific option
<FunctionName> Log is created by this function.
<TagValue> Tag value
add_fixed_tag():Oversize DHCP packet in add_fixed_tag
(<TagValue>)
Informational
Added DHCP option over option size
<TagValue> Tag value
dhcp_size(): Oversize DHCP packet in dhcp_size
Informational
DHCP packet oversize
dhcp_size():Bad DHCP cookie
168 December/2018
FUJITSU PSWITCH
Informational
DHCP cookie error
DNS domain name list entry add failed
Informational
Added DNS domain name list entry failed
DNS domain name list entry delete failed
Informational
Removed DNS name list entry failed
Message Collection
DNS name server entry add failed
Informational
Added DNS name server entry failed
DNS name server entry delete failed for <IPAddress> as entry does not exist
Informational
DNS name server entry can not removed when server entry not exist
<IPAddress> ip_address, or, ipv6_address, or hostname
Failed to add SNTP server
Informational
Added SNTP server failed
Failed to add syslog host
Informational
Added syslog host failed
Failed to get SNTP maximum number server entries
December/2018 169
Message Collection
Informational
Getting SNTP maximum server entries failed
FUJITSU PSWITCH
Failed to get syslog maximum number host entries
Informational
Get syslog maximum host entries failed
Failed to set SNTP client mode
Informational
Setting SNTP client mode failed
Failed to set syslog admin mode
Informational
Enabled syslog failed
set_fixed_tag():Oversize DHCP packet in set_fixed_tag
Informational
DHCP packet option oversize
set_fixed_tag():Oversize DHCP packet in set_fixed_tag append
Informational
DHCP append option oversize
set_fixed_tag():Wrong size in set_fixed_tag
Informational
DHCP option size error
The <ManagementPortType> management address is <IPAddress> (via
DHCP)
170 December/2018
FUJITSU PSWITCH
Informational
Message Collection
Record management IP address
<ManagementPortType> "L7_MGMT_SERVICEPORT", "L7_MGMT_NETWORKPORT",
<IPAddress>
"L7_MGMT_IPPORT" ip_address, or, ipv6_address, or hostname
DNS options export unsuccessful for interface <InterfaceNumber>
Notice
Export DNS options to external file failed
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Exported DNS options removal unsuccessful for interface
<InterfaceNumber>
Notice
Export DNS renoval options to external file failed
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to acquire an IP address on <InterfaceNumber>; DHCP Server did not respond
Notice
DHCP client acquire IP address failed
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to create DHCP client socket with domain PF_PACKET,
SOCK_DGRAM
Notice
Create DHCP packet socket failed
Failed to create socket with domain L7_AF_INET, L7_SOCK_DGRAM
Notice
Create DHCP client socket failed
Offered IP address is conflicting with the existing configuration
December/2018 171
Message Collection
Warning
DHCP server offer IP address conflicting exist configuration
FUJITSU PSWITCH
Oversize DHCP packet with option(<TagValue>) append of len(<LengthValue>)
Warning
DHCP append option oversize
<TagValue> Tag value
<LengthValue> ipv6 prefix length
2.1.13.
DHCP_SNOOPING
DHCP snooping failed to register for apply config completions
Alert
Register DHCP snooping configuration completion notify function failed
DHCP snooping failed to register for save config completions
Alert
Register DHCP snooping save configuration notify function failed
DHCP snooping failed to register for VLAN changes
Alert
Register DHCP snooping VLAN change notify function failed
DHCP snooping unable to create event queue
Alert
Create DHCP snooping event queue failed
DHCP snooping unable to create packet queue
Alert
Create DHCP snooping packet queue failed
DHCPv6 snooping failed to register with DHCPv6S
172 December/2018
FUJITSU PSWITCH
Alert
DHCPv6 snooping failed to register with DHCPv6 server
DHCPv6 snooping unable to create event queue
Alert
Create DHCPv6 snooping event queue failed
DHCPv6 snooping unable to create packet queue
Alert
Create DHCPv6 snooping packet queue failed
Message Collection
ERROR: Unable to create DHCP snooping thread
Alert
Create DHCP snooping task failed
ERROR: Unable to create DHCPv6 snooping thread
Alert
Create DHCPv6 snooping task failed
Failed to send NIM startup phase <NimStartupPhaseNumber> to DHCP
Snooping thread
Alert
Send NIM startup event to DHCP snooping task failed
<NimStartupPhaseNumber> NIM startup phase number
Failure creating DHCP snooping message queue semaphore
Alert
Create DHCP snooping message queue semaphore failed
Failure creating DHCPv6 snooping message queue semaphore
December/2018 173
Message Collection
Alert
Create DHCPv6 snooping message queue semaphore failed
FUJITSU PSWITCH
Failure sending DHCP snooping configurator init message
Alert
Send DHCP snooping configuration init message to DHCP snooping task failed
dsCnfgrInitPhase2Process: Failed to register with nvStore
Critical
Register DHCP snooping notify function failed
Failed to register with interface change callback with NIM
Critical
Register DHCP snooping NIM interface change notify function failed
Unable to create read/write lock for DHCP Snooping
Critical
Create DHCP snooping read / write lock failed
Unable to create read/write lock for DHCPv6 Snooping
Critical
Create DHCPv6 snooping read / write lock failed
Attempted to start the DHCP snooping lease timer while timer already running
Debug
Start DHCP snooping lease timer failed when timer already running
Attempted to start the DHCPv6 snooping lease timer while timer already running
174 December/2018
FUJITSU PSWITCH
Debug
Message Collection
Start DHCPv6 snooping lease timer failed when timer already running
<FileName>: <FileLineNumber>: dsv6Db Restore problem: Unable to read DHCPv6 snooping config file (<FileName>)
Error
DHCPv6 snooping reading snooping config file failed
<FileName> Log is created by this file.
<FileLineNumber> Log is created by this line.
Apply config completion came in a wrong phase
Error
DHCP snooping configuration completion notify in wrong state
Cannot find new DHCP snooping binding entry
Error
DHCP snooping find new binding entry failed
Cannot find new DHCPv6 snooping binding entry
Error
DHCPv6 snooping find new binding entry failed
Cannot find new IPSG binding entry
Error
IPSG find new entry failed
DHCP snooping event queue is NULL when processing VLAN change
Error
DHCP snooping event queue is NULL when processing VLAN change
DHCP snooping failed to get remaining and allotted lease times for interface <InterfaceNumber>
December/2018 175
Message Collection
Error
FUJITSU PSWITCH
Getting DHCP snooping interface lease time failed
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
DHCPv6 snooping failed to get remaining and allotted lease times for interface <InterfaceNumber>
Error
Getting DHCPv6 snooping interface lease time failed
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
DHCP snooping received an interface change callback for event
<EventName> on interface <InterfaceNumber> during invalid initialization phase
Error
DHCP snooping interface callback function received event during error phase
<EventName> Event name
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
DHCP snooping VLAN count on interface <InterfaceNumber> is bad
Error
DHCP snooping VLAN count on interface failed
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
DHCPv6 local server call back came in a wrong phase
Error
DHCPv6 server notify in wrong state
DHCPv6 operational address on network port is not allowed as IPv6 address
176 December/2018
FUJITSU PSWITCH
Error
Message Collection
DHCPv6 operational address on network port can not added to DHCP snooping entry
DHCPv6 operational address on service port is not allowed as IPv6 address
Error
DHCPv6 operational address on service port can not added to DHCP snooping entry
DHCPv6 Snooping event queue is NULL when processing Interface change
Error
DHCPv6 snooping event queue is NULL when processing interface change
DHCPv6 snooping event queue is NULL when processing VLAN change
Error
DHCPv6 snooping event queue is NULL when processing VLAN change
DHCPv6 snooping VLAN count on interface <InterfaceNumber> is bad
Error
DHCPv6 snooping VLAN count failed on interface
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
DS event queue is NULL when processing Interface change
Error
DHCP snooping event queue is NULL when processing interface change
Failed adding binding entry to snooping database
Error
Added binding entry to DHCP snooping database failed
Failed adding DHCPv6 binding entry to snooping database
December/2018 177
Message Collection
Error
Added binding entry to DHCPv6 snooping database failed
FUJITSU PSWITCH
Failed to add binding {<MacAddress>, <InterfaceNumber>, vlan
<VlanID>} from DISCOVER
Error
Added DHCP snooping binding entry failed by DISCOVER message
<MacAddress> MAC address
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<VlanID> VLAN ID
Failed to add binding {<MacAddress>, <InterfaceNumber>, vlan
<VlanID>} from REQUEST
Error
Added DHCP snooping binding entry failed by REQUEST message
<MacAddress> MAC address
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<VlanID> VLAN ID
Failed to add DHCPv6 binding {<MacAddress>, <InterfaceNumber>, vlan <VlanID>} from REQUEST
Error
Added DHCPv6 snooping binding entry failed by REQUEST message
<MacAddress> MAC address
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<VlanID> VLAN ID
Failed to add binding {<MacAddress>, <InterfaceNumber>, vlan
<VlanID>} from SOLICIT
178 December/2018
FUJITSU PSWITCH
Error
Message Collection
Added DHCPv6 snooping binding entry failed by SOLICIT message
<MacAddress> MAC address
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<VlanID> VLAN ID
Failed to add IPSG binding for <IPAddress> for interface
<InterfaceNumber> in hardware
Error
Added IPSG entry on interface in hardware failed
<IPAddress> ip_address, or, ipv6_address, or hostname
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to delete DHCP snooping AVL tree
Error
Delete DHCP snooping binding table failed
Failed to delete DHCPv6 snooping AVL tree
Error
Delete DHCPv6 snooping binding table failed
Failed to delete IPSG AVL tree
Error
Delete IPSG entry table failed
Failed to disable IP Source Guard in hardware on interface
<InterfaceNumber>
Error
Disabled IPSG on interface in hardware failed
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to enable DHCP snooping in hardware on interface
<InterfaceNumber>
December/2018 179
Message Collection
Error
FUJITSU PSWITCH
Enable DHCP snooping on interface in hardware failed
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to enable IP Source Guard in hardware on interface
<InterfaceNumber>
Error
Enabled IPSG in hardware failed
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to give write lock for DHCPv6 snooping
Error
DHCPv6 snooping give write lock failed
Failed to install IPSG binding for <IPAddress> on interface
<InterfaceNumber> in hardware. This message appears on failure of adding the IPSG entry
Error
Install IPSG entry on interface in hardware failed
<IPAddress> ip_address, or, ipv6_address, or hostname
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to queue apply config event to DHCP snooping thread
Error
Send DHCP snooping configuration event to DHCP snooping task failed
Failed to queue apply config event to DHCPv6 snooping thread
Error
Send DHCPv6 snooping configuration event to DHCPv6 snooping task failed
Failed to queue lease timer event to DHCP snooping thread
180 December/2018
FUJITSU PSWITCH
Error
Message Collection
DHCP snooping lease timer event send to DHCP snooping task failed
Failed to queue lease timer event to DHCPv6 snooping thread
Error
DHCPv6 snooping lease timer event send to DHCPv6 snooping task failed
Failed to queue local server event to DHCPv6 snooping thread
Error
Send DHCPv6 local server event to DHCPv6 snooping task failed
Failed to queue VLAN event to DHCP snooping thread
Error
Send VLAN change event to DHCP snooping task failed
Failed to queue VLAN event to DHCPv6 snooping thread
Error
Send VLAN change event to DHCPv6 snooping task failed
Failed to remove IPSG binding for <IPAddress> on interface
<InterfaceNumber> from hardware
Error
Removed IPSG entry on interface in hardware failed
<IPAddress> ip_address, or, ipv6_address, or hostname
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to take write lock for DHCPv6 snooping
Error
DHCPv6 snooping take write lock failed
Failed to un-configure <FamilyType> Source Guard MAC filtering in hardware on interface <InterfaceNumber>
December/2018 181
Message Collection
Error
FUJITSU PSWITCH
Clear IPSG entry in hardware failed
<FamilyType> type indicate ipv4 or ipv6(ex. L7_AF_INET, L7_AF_INET6,...) or generic family type
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failure taking DHCP snooping message queue semaphore
Error
DHCP snooping take message queue semaphore failed
Failure taking DHCPv6 snooping message queue semaphore
Error
DHCPv6 snooping take message queue semaphore failed
Invalid IPv4 address
Error
IPv4 address invalid
Invalid IPv6 address
Error
IPv6 address invalid
Invalid MAC address
Error
MAC address invalid
IPSG asked to remove binding with IP address set to 0 on interface
<InterfaceNumber>
182 December/2018
FUJITSU PSWITCH
Error
Message Collection
Removed IPSG entry failed when IP address is 0
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Management IPv6 address is not allowed
Error
Management IPv6 address can not added to DHCP snooping entry
Received NIM startup <NimStartupPhaseNumber> callback while in init state <State>
Error
DHCP snooping callback function received NIM startup event while in init state
<NimStartupPhaseNumber> NIM startup phase number
<State> State
Reserved IPv6 addresses are not allowed
Error
Reserved IPv6 address can not added to DHCP snooping entry
Static entry configuration with management VLAN Id is not allowed
Error
Management VLAN can not added to DHCP snooping entry
Static entry configuration with network IPv6 address is not allowed
Error
Invalid IPv6 address can not added to DHCP snooping entry
Static entry configuration with reserved system MAC address is not allowed
December/2018 183
Message Collection
Error
FUJITSU PSWITCH
System reserved MAC address can not added to DHCP snooping static entry
Static entry configuration with router MAC address is not allowed
Error
Router MAC address can not added to DHCP snooping entry
This IPv6 address is already configured
Error
IPv6 address is exist DHCP snooping entry can not added to DHCP snooping static entry
Unable to allocate the DHCP snooping bindings table
Error
DHCP snooping binding table memory allocate failed
Unable to allocate the DHCP snooping bindings table data heap
Error
DHCP snooping binding table data heap memory allocate failed
Unable to allocate the DHCPv6 snooping bindings table
Error
DHCPv6 snooping binding table memory allocate failed
Unable to allocate the DHCPv6 snooping bindings table data heap
Error
DHCPv6 snooping binding table data heap memory allocate failed
Unable to allocate the IPSG entry table
Error
IPSG entry table memory allocate failed
Unable to allocate the IPSG entry table data heap
184 December/2018
FUJITSU PSWITCH
Error
IPSG entry table data heap memory allocate failed
Message Collection
Unknown event message type <Dsv6Message> received in DHCPv6 snooping thread
Error
DHCP v6 task received unknown message type event
<Dsv6Message> "DSV6_VLAN_EVENT", "DSV6_TIMER_EVENT",
"DSV6_INTF_EVENT" ...
Unknown event message type received in the DHCP snooping thread
Error
DHCP snooping task received unknown message type
Unknown NIM startup event <NimStartupPhaseNumber>
Error
DHCP snooping task received unknown NIM startup event
<NimStartupPhaseNumber> NIM startup phase number
<FileName>: <FileLineNumber>: dsDb Restore problem: DHCP Sboop unable to read snooping config file (<FileName>)
Informational
DHCP snooping reading snooping config file failed
<FileName> Log is created by this file.
<FileLineNumber> Log is created by this line.
<FileName>: <FileLineNumber>: dsIntfChangeProcess(): Received a interface callback while outside the EXECUTE state
Informational
DHCP snooping interface change callback received event while outside execute state
<FileName> Log is created by this file.
<FileLineNumber> Log is created by this line.
<FileName>: <FileLineNumber>: dsv6IntfChangeProcess(): Received a interface callback while outside the EXECUTE state
December/2018 185
Message Collection
Informational
FUJITSU PSWITCH
DHCPv6 snooping interface change callback received event while outside execute state
<FileName> Log is created by this file.
<FileLineNumber> Log is created by this line.
DHCPv6 Snooping: NIM event Enqueue failed
Informational
DHCPv6 snooping interface change callback send NIM event to DHCPv6 snooping task failed
Dropped DHCP multicast MAC address packet
Informational
DHCP snooping dropped DHCP multicast MAC address packet
DS: NIM event Enqueue failed
Informational
DHCP snooping interface change callback send NIM event to DHCP snooping task failed
dsDbSaveCfg: Error during sysapiCfgFileWrite <FileName>
Informational
DHCP snooping configuration save failed
<FileName> Log is created by this file.
dsv6DbSaveCfg: Error during sysapiCfgFileWrite <FileName>
Informational
DHCPv6 snooping configuration save failed
<FileName> Log is created by this file.
Failed to disable DHCP snooping in hardware on interface
(<InterfaceNumber>) <InterfaceNumber>
186 December/2018
FUJITSU PSWITCH
Informational
Message Collection
Disabled DHCP snooping on interface in hardware failed
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to send DHCP pkt on intf (<InterfaceNumber>) and vlanID
(<VlanID>)
Informational
Send DHCP packet failed
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<VlanID>
0/1, 0/0/1
VLAN ID
Interface <InterfaceNumber> is D-Disabled as the rate of the incoming DHCP messages on this interface exceeded the rate limit of <MaxValue> pps (burst interval <BurstInterval>)
Notice
Interface is D-Disabled as of the incoming DHCP message on this interface exceed the rate limit
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<MaxValue>
<BurstInterval>
Maximum value
Burst interval
Interface <InterfaceNumber> is D-Disabled as the rate of the incoming DHCPv6 messages on this interface exceeded the rate limit of <MaxValue> pps (burst interval <BurstInterval>)
Notice
Interface is D-Disabled as of the incoming DHCPv6 message on this interface exceed the rate limit
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<MaxValue>
<BurstInterval>
0/1, 0/0/1
Maximum value
Burst interval
Client previously bound to interface <InterfaceNumber>, vlan
<VlanID>. This message appears when DHCP Snooping untrusted message drops the DHCP Decline or Release messages
December/2018 187
Message Collection
Warning
FUJITSU PSWITCH
Client previously bound to interface on vlan
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<VlanID>
0/1, 0/0/1
VLAN ID
DHCP L2 Relay dropping client msg whose SVLAN does not have L2 Relay enabled
Warning
DHCP L2 Relay dropping client message whose SVLAN does not have L2 Relay enabled
DHCP L2 Relay dropping client msg with non-zero giadddr
Warning
Filter out any packets with non-zero giaddr representing L3 full Relay agent
DHCP L2 Relay dropping client msg with Option-82 rx'ed on L2 Relay untrusted
Warning
On L2 Relay untrusted interfaces, Option-82 is not expected
DHCP L2 Relay dropping client msg without Option-82 rx'ed on L2
Relay trusted
Warning
On L2 Relay trusted interfaces, Option-82 is expected
DHCP L2 Relay dropping server msg with Option-82 rx'ed on L2Relay untrusted
Warning
The packet is put for filtering as the packet have Option-82, which is not expected on L2 Relay untrusted interfaces. So drop the packet
DHCP L2 Relay dropping server msg without expected circuit-id rx'ed on trusted
188 December/2018
FUJITSU PSWITCH
Warning
Message Collection
Filter the packet as the expected Circuit Id is not seen in the server reply
DHCP L2 Relay dropping server msg without expected remote-id rx'ed on trusted
Warning
Filter the packet as the expected Remote Id is not seen in the server reply
DHCP L2 Relay dropping server msg without Option-82 rx'ed on
L2Relay trusted
Warning
The packet is put for filtering as the packet might not have Option-82, which is expected on L2 Relay trusted interfaces. So drop the packet
DHCP packet: op <Operation>, chaddr <MacAddress>
Warning
Record DHCPv6 snooping dropped DHCP packet
<Operation> Operation, "Add", "Remove", "Up", "Down", "Enable",
<MacAddress>
"Disable" …
MAC address
DHCP packet: op <Operation>, htype <HWAddressType>, hlen
<HWAddressLength>, hops <HopsValue>, xid <IPAddress>, secs
<TimeValue>, ciaddr <IPAddress>, yiaddr <IPAddress>, server
<IPAddress>, giaddr <IPAddress>, chaddr <MacAddress>
December/2018 189
Message Collection
Warning
FUJITSU PSWITCH
Record DHCP snooping dropped DHCP packet
<Operation> Operation, "Add", "Remove", "Up", "Down", "Enable",
<HWAddressType>
"Disable" …
The type of MAC address.
<HWAddressLength> The length for MAC address.
<HopsValue> The value for Hops
<IPAddress>
<TimeValue>
<MacAddress> ip_address, or, ipv6_address, or hostname
Time Value
MAC address
DHCP snooping dropping <DhcpMessageType> received on interface
<InterfaceNumber> on vlan <VlanID>, from <MacAddress>. Station not in bindings table. This message appears when DHCP Snooping untrusted port drops DHCP Decline or DHCP Release message for non-existing entry in SNOOPING table
Warning
DHCP snooping dropped DHCP Decline or DHCP Release message received on interface on vlan when non-existing entry in sbooping table
<DhcpMessageType> "UNKNOWN", "DISCOVER", "OFFER", "REQUEST", "DECLINE",
"ACK", "NACK", "RELEASE" ...
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<VlanID>
<MacAddress>
VLAN ID
MAC address
DHCPv6 snooping dropping <DhcpMessageType> received on interface
<InterfaceNumber> on vlan <VlanID>, from <MacAddress>. Station not in bindings table. This message appears when DHCP Snooping untrusted port drops DHCP Decline or DHCP Release message for non-existing entry in SNOOPING table
190 December/2018
FUJITSU PSWITCH
Warning
Message Collection
DHCPv6 snooping dropped DHCP Decline or DHCP Release message received on interface on vlan when non-existing entry in sbooping table
<DhcpMessageType> "UNKNOWN", "DISCOVER", "OFFER", "REQUEST", "DECLINE",
"ACK", "NACK", "RELEASE" ...
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<VlanID>
<MacAddress>
0/1, 0/0/1
VLAN ID
MAC address
DHCP snooping dropping <DhcpMessageType> received on interface
<InterfaceNumber> on vlan <VlanID>, from client <MacAddress>
Warning
DHCP snooping dropped DHCP packet when previously bound to other interface
<DhcpMessageType> "UNKNOWN", "DISCOVER", "OFFER", "REQUEST", "DECLINE",
"ACK", "NACK", "RELEASE" ...
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<VlanID>
<MacAddress>
0/1, 0/0/1
VLAN ID
MAC address
DHCP snooping dropping client message received on interface
<InterfaceNumber>, vlan <VlanID>
Warning
DHCP snooping dropped DHCP message when message source MAC address does not match the client hardware address
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<VlanID> VLAN ID
DHCP snooping dropping DHCP server message received on untrusted interface <InterfaceNumber> on vlan <VlanID>. This message appears when DHCP Snooping untrusted port drops the DHCP Server message
December/2018 191
Message Collection
Warning
FUJITSU PSWITCH
DHCP snooping dropped DHCP server message received on untrusted interface on vlan
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<VlanID>
0/1, 0/0/1
VLAN ID
DHCPv6 snooping dropping <Dhcpv6MessageType> received on interface <InterfaceNumber> on vlan <VlanID>, from client
<MacAddress>
Warning
DHCPv6 snooping dropped DHCP packet when previously bound to other interface
<Dhcpv6MessageType> "SOLICIT", "ADVERTISE", "REQUEST", "CONFIRM", "RENEW",
"REBIND", "REPLY" ...
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<VlanID>
<MacAddress>
0/1, 0/0/1
VLAN ID
MAC address
DHCPv6 snooping dropping client message received on interface
<InterfaceNumber>, vlan <VlanID>
Warning
DHCPv6 snooping dropped DHCP message when message source MAC address does not match the client hardware address
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<VlanID> VLAN ID
DHCPv6 snooping dropping DHCP server message received on untrusted interface <InterfaceNumber> on vlan <VlanID>. This message appears when DHCP Snooping untrusted port drops the DHCP Server message
192 December/2018
FUJITSU PSWITCH
Warning
Message Collection
DHCPv6 snooping dropped DHCP server message received on untrusted interface on vlan
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<VlanID>
0/1, 0/0/1
VLAN ID
Dropping DHCPv4 client message received on untrusted interface
<InterfaceNumber> on vlan <VlanID> as a DHCPv4 static entry is configured with same MAC address
Warning
DHCPv4 snooping dropped DHCPv4 client message received on untrusted interface as a DHCPv4 static entry is configured with same MAC address
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<VlanID> VLAN ID
Dropping DHCPv6 client message received on untrusted interface
<InterfaceNumber> on vlan <VlanID> as a DHCPv6 static entry is configured with same MAC address
Warning
DHCPv6 snooping dropped DHCPv4 client message received on untrusted interface as a DHCPv6 static entry is configured with same MAC address
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<VlanID>
0/1, 0/0/1
VLAN ID
interface <InterfaceNumber> vlanId <VlanID>
Warning
Processing DHCP packets at specific interface and VLAN
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<VlanID>
0/1, 0/0/1
VLAN ID
IP packet: ver <IP6HeaderVerClassFlow>, len <PacketLength>, src
<IP6Address>, dst <IP6Address>
December/2018 193
Message Collection
Warning
FUJITSU PSWITCH
Record DHCPv6 snooping dropped packet IP header
<IP6HeaderVerClassFlow> Class Flow version of IPv6 header for DHCP Snooping
<PacketLength>
<IP6Address>
Packet length
IPv6 address
IP packet: ver/hlen <VersionLength>, tos <TypeValue>, len
<LengthValue>, id <IPAddress>, flags/offset <FragmentOffset>, ttl
<TtlValue>, proyo <ID>, src <SourceString>, dst <IPAddress>
Warning
Record DHCP snooping dropped packet IP header
<VersionLength> Version length
<TypeValue>
<LengthValue>
<IPAddress>
<FragmentOffset>
<TtlValue>
<ID>
<SourceString>
Type Value ipv6 prefix length ip_address, or, ipv6_address, or hostname
Fragment offset
TTL value
ID
Source string
Source MAC address <MacAddress> does not match client hardware address <MacAddress>. This message appears when DHCP Snooping drops the source mac address doest not match the clinet Hardware address.
Warning
DHCP snooping dropped DHCP message when message source MAC address does not match the client hardware address
<MacAddress> MAC address
Source MAC address <MacAddress> does not match client hardware address <MacAddress>. This message appears when DHCPv6 Snooping drops whose source mac address doest not match the clinet Hardware address.
194 December/2018
FUJITSU PSWITCH
Warning
Message Collection
DHCP snooping dropped DHCP message when message source MAC address does not match the client hardware address
<MacAddress> MAC address
2.1.14.
DHCP6_CLIENT
Deleting DHCPv6 address from IP stack failed on <InterfaceNumber>
Debug
Failed to remove IPv6 addresses from ip6Map database, because of IP interface doesn't exist
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Deletion of 'automatic' pool failed
Debug
Failed to delete memory pool for saving dynamic IPv6 addresses. The memory pool may not exist
osapiNetAddrV6Del failed on <InterfaceNumber>
Debug
Cannot delete IPv6 address from OS system
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
DHCPv6 client cannot bind socket (<SocketFD>) to <IPPortNumber>
UDP port
Error
Cannot bind UDP port for DHCPv6 client. The UDP port may be in used
<SocketFD> File descriptor for socket
<IPPortNumber> UDP or TCP port number, ex:8000, 21
DHCPv6 client control socket bind failed
December/2018 195
Message Collection
Error
Cannot bind internal port for DHCPv6 client
FUJITSU PSWITCH
DHCPv6 client control socket creation failed
Error
Cannot create internal socket to receive event from other module
DHCPv6 client initialization failed, exiting dhcpv6 client task
Error
Failed to initialize resource of DHCPv6 client task. Includes sockets, timer and IP interfaces
DHCPv6 client interface <InterfaceNumber> init failed
Error
Failed to create and initialize IP interface from OS system
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
DHCPv6 client set socket option L7_IPV6_RECVPKTINFO failed
Error
Cannot set socket option L7_IPV6_RECVPKTINFO for DHCPv6 client
DHCPv6 client set socket option L7_SO_REUSEADDR failed
Error
Cannot set socket option L7_SO_REUSEADDR for DHCPv6 client
DHCPv6 client socket creation failed on <InterfaceNumber>
Error
Cannot open socket for DHCPv6 client
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to find ifp for <InterfaceNumber>
196 December/2018
FUJITSU PSWITCH
Error
Message Collection
Failed to get IP interface information. The IP interface may not existed
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to get link local address on <InterfaceNumber>
Error
Cannot get IPv6 link local address from IP interface
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to initialize DHCPv6 Client socket on <InterfaceNumber>.
Client protocol won't work as a result!!!
Error
Failed to initialize sockets for specific IP interface
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to receive control message
Error
Cannot receive control message from internal socket. The socket may no exist
Failed to send control message to DHCPv6 client
Error
Failed to send control message (from other module) to DHCPv6 client task
ip6Map adhcp add failed
Error
Failed to add IPv6 addresses into ip6Map database, because of incompatible address information, lack of resource or IP interface doesn't exist
osapiInetNtop failed
December/2018 197
Message Collection
Error
Cannot convert IPv6 address to a displayable string
FUJITSU PSWITCH
osapiNetAddrV6Add failed on <InterfaceNumber>
Error
Cannot add IPv6 address to OS system
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Creation of 'automatic' address prefix failed
Informational
Failed to add dynamic IPv6 addresses into memory pool, because of incompatible address information
Creation of 'automatic' pool failed
Informational
Failed to create memory pool for saving dynamic IPv6 addresses, because of lack of resource or memory pool has exist
Error on call to osapiFsWrite routine on config file <FileName>
Informational
Cannot save DHCPv6 client configuration into NVRAM
<FileName> Log is created by this file.
Failed to Create DHCPv6 Client Task
Informational
Failed to Create DHCPv6 Client Task. The task may have existed
DNS options export unsuccessful for interface <InterfaceNumber>
198 December/2018
FUJITSU PSWITCH
Notice
Message Collection
Failed to add DNS configuration to the external file
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Exported DNS options removal unsuccessful for interface
<InterfaceNumber>
Notice
Failed to remove DNS configuration previously added for the specified interface
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Interface <InterfaceNumber> is not up!!!
Notice
Check IP interface status, but the interface is not up
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to add DNS Server <IP6Address> to DNS Client
Warning
Failed to add DNS Server information from database
<IP6Address> IPv6 address
Failed to add Domain <DomainName> to DNS Client
Warning
Failed to add Domain information from database
<DomainName> Domain name
Failed to remove DNS Server <IP6Address> to DNS Client
Warning
Failed to remove DNS Server information from database
<IP6Address> IPv6 address
Failed to remove Domain <DomainName> to DNS Client
December/2018 199
Message Collection
Warning
Failed to remove Domain information from database
<DomainName> Domain name
2.1.15.
DHCP6S
FUJITSU PSWITCH
<FileName> <FileLineNumber>: <FunctionName>: Cannot bind client-side socket
Alert
Cannot bind client-side socket. The UDP port may be in used
<FileName> Log is created by this file.
<FileLineNumber> Log is created by this line.
<FunctionName> Log is created by this function.
<FileName> <FileLineNumber>: <FunctionName>: Cannot bind server-side socket
Alert
Cannot bind server-side socket. The UDP port may be in used
<FileName> Log is created by this file.
<FileLineNumber>
<FunctionName>
Log is created by this line.
Log is created by this function.
<FileName> <FileLineNumber>: <FunctionName>: Cannot open client-side socket
Alert
Failed to open client-side socket
<FileName> Log is created by this file.
<FileLineNumber>
<FunctionName>
Log is created by this line.
Log is created by this function.
<FileName> <FileLineNumber>: <FunctionName>: Cannot open outbound socket
200 December/2018
FUJITSU PSWITCH
Alert
Failed to open outbound socket
<FileName> Log is created by this file.
<FileLineNumber>
<FunctionName>
Log is created by this line.
Log is created by this function.
Message Collection
<FileName> <FileLineNumber>: <FunctionName>: Cannot open server-side socket
Alert
Failed to open server-side socket
<FileName> Log is created by this file.
<FileLineNumber> Log is created by this line.
<FunctionName> Log is created by this function.
<FileName> <FileLineNumber>: <FunctionName>: Cannot setsockopt
IPV6_MULTICAST_LOOP for outbound socket
Alert
Cannot set socket option IPV6_MULTICAST_LOOP for outbound socket
<FileName> Log is created by this file.
<FileLineNumber>
<FunctionName>
Log is created by this line.
Log is created by this function.
<FileName> <FileLineNumber>: <FunctionName>: Cannot setsockopt
IPV6_RECVPKTINFO for client-side socket
Alert
Cannot set socket option IPV6_RECVPKTINFO for client-side socket
<FileName> Log is created by this file.
<FileLineNumber> Log is created by this line.
<FunctionName> Log is created by this function.
<FileName> <FileLineNumber>: <FunctionName>: Cannot setsockopt
IPV6_RECVPKTINFO for server-side socket
December/2018 201
Message Collection
Alert
FUJITSU PSWITCH
Cannot set socket option IPV6_RECVPKTINFO for server-side socket
<FileName> Log is created by this file.
<FileLineNumber>
<FunctionName>
Log is created by this line.
Log is created by this function.
<FileName> <FileLineNumber>: <FunctionName>: Cannot setsockopt
SO_REUSEADDR for client-side socket
Alert
Cannot set socket option SO_REUSEADDR for client-side socket
<FileName> Log is created by this file.
<FileLineNumber> Log is created by this line.
<FunctionName> Log is created by this function.
<FileName> <FileLineNumber>: <FunctionName>: Cannot setsockopt
SO_REUSEADDR for server-side socket
Alert
Cannot set socket option SO_REUSEADDR for server-side socket
<FileName> Log is created by this file.
<FileLineNumber>
<FunctionName>
Log is created by this line.
Log is created by this function.
<FileName> <FileLineNumber>: <FunctionName>: Unable to create
DHCPv6 Server data control semaphore
Alert
Unable to create DHCPv6 Server data control semaphore
<FileName> Log is created by this file.
<FileLineNumber> Log is created by this line.
<FunctionName> Log is created by this function.
<FileName> <FileLineNumber>: <FunctionName>: Unable to initialize DHCPv6 Server lease hash table
202 December/2018
FUJITSU PSWITCH
Alert
Message Collection
Unable to initialize hash table of DHCPv6 server lease table. It may be due to lack of resource
<FileName> Log is created by this file.
<FileLineNumber>
<FunctionName>
Log is created by this line.
Log is created by this function.
<FileName>: <FileLineNumber>: dhcp6sCnfgrInitPhase1Process:
Error allocating DHCPv6 Server info structure
Alert
Failed to allocate memory for DHCPv6 Server info structure
<FileName> Log is created by this file.
<FileLineNumber> Log is created by this line.
<FileName>: <FileLineNumber>: dhcp6sCnfgrInitPhase1Process:
Error allocating DHCPv6 Server util structure
Alert
Failed to allocate memory for DHCPv6 Server util structure
<FileName> Log is created by this file.
<FileLineNumber> Log is created by this line.
<FileName>: <FileLineNumber>: dhcp6sCnfgrInitPhase1Process:
Error allocating memory for DHCPv6 Server Config structure
Alert
Failed to allocate memory for DHCPv6 Server Config structure
<FileName> Log is created by this file.
<FileLineNumber> Log is created by this line.
<FileName>: <FileLineNumber>: dhcp6sCnfgrInitPhase1Process:
Error starting DHCP6 server apps
Alert
Failed to initialize the DHCPv6 Server layer application.
<FileName> Log is created by this file.
<FileLineNumber> Log is created by this line.
<FileName>: <FileLineNumber>: dhcp6sCnfgrInitPhase2Process:
Could not register for v6 routing events
December/2018 203
Message Collection
Alert
FUJITSU PSWITCH
Unable to register callback function for routing events, due to lack of resource.
<FileName> Log is created by this file.
<FileLineNumber> Log is created by this line.
<FileName>: <FileLineNumber>: dhcp6sCnfgrInitPhase2Process:
Could not register with nvStore
Alert
Unable to register save-restore routine with NVRAM during initialization phase.
<FileName> Log is created by this file.
<FileLineNumber> Log is created by this line.
<FileName>: <FileLineNumber>: dhcp6sCnfgrInitPhase3Process:
DHCPv6 Server unable to apply config
Alert
Failed to apply configuration depend on config-file.
<FileName> Log is created by this file.
<FileLineNumber> Log is created by this line.
<FileName>: <FileLineNumber>: dhcp6sCnfgrInitPhase3Process:
DHCPv6 Server unable to read config file
Alert
Unable to read configuration data from config-file management system.
<FileName> Log is created by this file.
<FileLineNumber> Log is created by this line.
<FileName>: <FileLineNumber>: dhcp6sMapAppsInit: Error starting
DHCPv6 Server tasks
Alert
Failed to start DHCPv6 server task
<FileName> Log is created by this file.
<FileLineNumber> Log is created by this line.
<FileName>: <FileLineNumber>: dhcp6sProcessingTaskCreate:
Unable to syncronize with DHCPv6 Server processing task
204 December/2018
FUJITSU PSWITCH
Alert
Message Collection
Unable to synchronize with DHCPv6 Server processing task. Waiting for DHCPv6 server processing task feedback, but not
<FileName> Log is created by this file.
<FileLineNumber> Log is created by this line.
DHCP6S unable to create processing message queue
Alert
Failed to create queue resource for DHCPv6 server
dhcp6sStartTasks: Failed to create DHCPv6 Server task
Alert
Failed to create DHCPv6 Server task. The task may have existed
dhcp6sStartTasks: Unable to synchronize with DHCPv6 Server task
Alert
Unable to synchronize with DHCPv6 Server task. Waiting for DHCPv6 server task feedback, but not
Unable to create DHCP6S processing task
Alert
Unable to create DHCPv6 processing task
<FileName> <FileLineNumber>: <FunctionName>: intf =
<InterfaceNumber>, <InterfaceNumber>, event = <EventID>
Debug
Process routing events
<FileName>
<FileLineNumber>
Log is created by this file.
Log is created by this line.
<FunctionName> Log is created by this function.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<EventID>
0/1, 0/0/1
Event ID
<FileName> <FileLineNumber>: <FunctionName>: intf =
<InterfaceNumber>, <InterfaceNumber>, state = <State>
December/2018 205
Message Collection
Debug
FUJITSU PSWITCH
Enable/Disable a DHCPv6 interface
<FileName> Log is created by this file.
<FileLineNumber>
<FunctionName>
Log is created by this line.
Log is created by this function.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<State> State
<FunctionName>: intf=<InterfaceNumber>, <InterfaceNumber>, event=<EventID>
Debug
This is the callback function DHCP6 registers with IP6MAP for notification of routing events
<FunctionName> Log is created by this function.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<EventID> Event ID
Allocating pDhcp6sInfo
Debug
Allocating DHCPv6 Server info structure
Allocating pDhcp6sMapCfgData
Debug
Allocating memory for DHCPv6 Server Config structure
Calling dhcp6sApplyConfigData
Debug
Apply configuration depend on config-file
Calling dhcp6sCnfgrInitRequestHandle
206 December/2018
FUJITSU PSWITCH
Debug
Message Collection
Calling dhcp6sCnfgrInitRequestHandle() function to handles an initialization request from the configurator
Calling dhcp6sMapAppsInit
Debug
Calling dhcp6sMapAppsInit function to start DHCPv6 server task
Calling ip6MapRegisterRoutingEventChange
Debug
Register callback function for routing events
Calling sysapiCfgFileGet
Debug
Read configuration data from config-file management system
Creating dhcp6sProcTask
Debug
DHCPv6 server processing task will be created
DHCP6S configuration state set to <State>
Debug
Check if the correct logging flag has been used
<State> State
dhcp6sClientPacketRecv: handling <Dhcp6MessageType> on interface
<InterfaceNumber>, <InterfaceNumber> in RELAY mode
December/2018 207
Message Collection
Debug
FUJITSU PSWITCH
At relay mode interface, processing DHCPv6 packets
<Dhcp6MessageType> "msg", "solicit", "advertise", "request", "confirm", "renew",
"rebind", "reply"...
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
dhcp6sClientPacketRecv: handling <Dhcp6MessageType> on interface
<InterfaceNumber>, <InterfaceNumber> in SERVER mode
Debug
At server mode interface, processing DHCPv6 packets
<Dhcp6MessageType> "msg", "solicit", "advertise", "request", "confirm", "renew",
"rebind", "reply"...
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
dhcp6sClientPacketRecv: received <Dhcp6MessageType> from
<IP6Address>
Debug
Show current packet's message type and source address
<Dhcp6MessageType> "msg", "solicit", "advertise", "request", "confirm", "renew",
<IP6Address>
"rebind", "reply"...
IPv6 address
dhcp6sClientPacketRecv: recv pkt intf=<InterfaceNumber>,
<InterfaceNumber>, to_addr=<IP6Address>, from_addr=<IP6Address>, len=<LengthValue>, hops=<CountValue>
Debug
Process a DHCPv6 packet received on the client-side socket. Show current packet information
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<IP6Address>
<LengthValue>
<CountValue>
IPv6 address ipv6 prefix length
Count Value
dhcp6sServerIdGet: intf <InterfaceNumber>, <InterfaceNumber> macAddr: <MacAddress>
208 December/2018
FUJITSU PSWITCH
Debug
Message Collection
Get the Server DUID. As described in RFC 3315, we generate a server DUID using the system burned-in MAC address in combination with a timestamp value
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<MacAddress>
0/1, 0/0/1
MAC address
dhcp6sServerIdGet: sysBIA: <MacAddress>
Debug
Get the Unit's System Burned in Mac Address
<MacAddress> MAC address
dhcp6sServerPacketRecv: received <Dhcp6MessageType> from
<IP6Address>
Debug
Show current packet's message type and source address
<Dhcp6MessageType> "msg", "solicit", "advertise", "request", "confirm", "renew",
<IP6Address>
"rebind", "reply"...
IPv6 address
dhcp6sServerPacketRecv: recv pkt intf=<InterfaceNumber>,
<InterfaceNumber>, to_addr=<IP6Address>, from_addr=<IP6Address>, len=<LengthValue>, hops=<CountValue>
Debug
Process a DHCPv6 packet received on the server-side socket. Show current packet information
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<IP6Address>
<LengthValue>
<CountValue>
0/1, 0/0/1
IPv6 address ipv6 prefix length
Count Value
Entering dhcp6sCnfgrHandle
Debug
Entering dhcp6sCnfgrHandle() function to process commands from configurator
nvStoreRegister for dhcp6sNotifyFunctionList
December/2018 209
Message Collection
Debug
FUJITSU PSWITCH
Register save-restore routine with NVRAM during initialization phase
server6_recv: processing <Dhcp6MessageType> message on interface
<InterfaceNumber>, <InterfaceNumber>
Debug
Show current packet's message type and interface
<Dhcp6MessageType> "msg", "solicit", "advertise", "request", "confirm", "renew",
"rebind", "reply"...
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Waiting for dhcp6sProcTask init
Debug
Ready to synchronize with DHCPv6 Server processing task. Waiting for DHCPv6 server processing task feedback
Argument Pool to FindPoolByName is a NULL ptr
Error
Check input parameters in dhcp6sFindPoolByName() function
Argument Pool to FindPoolHostByDuid is a NULL ptr
Error
Check input parameters in dhcp6sFindPoolHostByDuid() function
Argument Pool to FindPoolHostByName is a NULL ptr
Error
Failed to find memory pool by name
Argument to CreateDynamicPool is a NULL ptr
Error
Check input parameters in dhcp6sCreatePool() function
Argument to CreatePoolHost is a NULL ptr
210 December/2018
FUJITSU PSWITCH
Error
Check input parameters in dhcp6sCreatePoolHost() function
Message Collection
Argument to DestroyPool is a NULL in dhcp6sDestroyPool()
Error
Check input parameters in dhcp6sDestroyPool() function
Argument to DestroyPool is a NULL in dhcp6sDestroyPoolHost()
Error
Check input parameters in dhcp6sDestroyPoolHost() function
Argument to DestroyPool not provided!
Error
Check input parameters in dhcp6sDestroyPool() function
Argument to InterfaceCreate is a NULL ptr
Error
Check input parameters in dhcp6sInterfaceCreate() function
Cannot join DHCPV6_ALL_AGENTS multicast group for intf
<InterfaceNumber>
Error
Failed to join DHCPV6_ALL_AGENTS multicast group for specific interface
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Cannot join DHCPV6_ALL_SERVERS multicast group for intf
<InterfaceNumber>
December/2018 211
Message Collection
Error
FUJITSU PSWITCH
Failed to join DHCPV6_ALL_SERVERS multicast group for specific interface
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Cannot leave DHCPV6_ALL_AGENTS multicast group for intf
<InterfaceNumber>
Error
Failed to leave DHCPV6_ALL_AGENTS multicast group for specific interface
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Cannot leave DHCPV6_ALL_SERVERS multicast group for intf
<InterfaceNumber>
Error
Failed to leave DHCPV6_ALL_SERVERS multicast group for specific interface
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Could not send message through DHCPv6 Server processing message queue
Error
Could not send message through DHCPv6 Server processing message queue
dhcp6sApplyConfigData: Error applying DHCPv6 Server pool config data
Error
Failed to create a host within an address pool
dhcp6sApplyConfigData: Error invalid admin mode
Error
Check admin mode value of DHCPv6 server configuration data
dhcp6sClientPacketRecv: invalid DHCPv6 interface
<InterfaceNumber>
212 December/2018
FUJITSU PSWITCH
Error
Message Collection
The DHCPv6 packet only can be handled at interface which is physical type, loopback type or logical type
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
dhcp6sIntfsApplyConfigData: Error applying DHCPv6 Server interface config data, intf=<InterfaceNumber>, <InterfaceNumber>
Error
Failed to apply DHCPv6 server interface configuration data
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
dhcp6sMapIntfSet: Server DUID get failure
Error
Could not get DHCPv6 server DUID of specific interface. The interface may not be ready to process DHCPv6
dhcp6sProcTask: Bad status on receive message from proc queue
<ErrorCode>
Error
Bad status on receiving message from DHCPv6 server processing queue
<ErrorCode> Error code
dhcp6sSave: Error during osapiFsWrite for util file <FileName>
Error
Cannot save DHCPv6 server configuration into NVRAM
<FileName> Log is created by this file.
dhcp6sServerPacketRecv: invalid DHCPv6 interface index
<InterfaceNumber>, <InterfaceNumber>
December/2018 213
Message Collection
Error
FUJITSU PSWITCH
The DHCPv6 packet only can be handled at interface which is physical type, loopback type or logical type
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
DHCPv6 Server message queue does not exist
Error
DHCPv6 Server processing message queue does not exist
Error: circular loop detected in dhcp6sListGetCount
Error
Count the number of nodes in the list, but circular loop detected
FindPoolHostByDuid: pool <PoolName> not found
Error
Failed to find memory pool by name
<PoolName> Pool name
Invalid intIfNum <InterfaceNumber> for InterfaceCreate
Error
Check input parameters in dhcp6sInterfaceCreate() function
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Invalid intIfNum <InterfaceNumber> for InterfaceDestroy
Error
Check input parameters in dhcp6sInterfaceDestroy() function
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Invalid intIfNum <InterfaceNumber> for settting multicast socket option
214 December/2018
FUJITSU PSWITCH
Error
Message Collection
Check input parameters in dhcp6sMapIntfMcastGroupJoin() and dhcp6sMapIntfMcastGroupLeave() function
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Invalid registrar ID <ComponentID> is specified for registration
Error
A component cannot add register information to inform DHCPv6 packets from server module, because of component ID is invalid
<ComponentID> Component ID
Invalid registrar ID <ComponentID> is specified for unregistration
Error
A component cannot remove register information from DHCPv6 server module, because of component ID is invalid
<ComponentID> Component ID
Received unknown or unsupported DHCPv6 msgtype
(<Dhcp6MessageType>)
Error
Receive unknown or unsupported message type of DHCPv6 packets at server mode interface
<Dhcp6MessageType> "msg", "solicit", "advertise", "request", "confirm", "renew",
"rebind", "reply"...
Received unsupported DHCPv6 msgtype (<Dhcp6MessageType>)
Error
Receive unsupported message type of DHCPv6 packets at server mode interface
<Dhcp6MessageType> "msg", "solicit", "advertise", "request", "confirm", "renew",
"rebind", "reply"...
Registrar ID <ComponentID>, <ComponentName> is already registered
December/2018 215
Message Collection
Error
FUJITSU PSWITCH
A component has been registered information to inform DHCPv6 packets from server module
<ComponentID> Component ID
<ComponentName> Component name
Registrar ID <ComponentID>, <ComponentName> is already unregistered
Error
A component cannot remove register information, because of DHCPv6 server module doesn't have register information
<ComponentID> Component ID
<ComponentName> Component name
Unable to allocate memory for interface node!
Error
Unable to allocate memory for interface node
Unable to allocate memory for pool node!
Error
Unable to allocate memory for pool node due to lack of resource
Unable to delink pool node from active pools
Error
Unable to delink pool node from active pools. The link node may have invalid point address
Added/Modified host duid=<ID>
Informational
Add or modify specific host's address pool successfully
<ID> ID
Created host duid=<ID>
216 December/2018
FUJITSU PSWITCH
Informational
Create a host within an address pool successfully
<ID> ID
Created pool <PoolName>
Informational
Create specific memory pool successfully
<PoolName> Pool name
Message Collection
Created/Updated interface node for intf <InterfaceNumber>,
<InterfaceNumber>
Informational
Create a DHCPv6 interface node successfully
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Destroyed host duid=<ID> in pool <PoolName>
Informational
Destroy a host within a pool node successfully
<ID> ID
<PoolName> Pool name
Destroyed interface node for intf <InterfaceNumber>,
<InterfaceNumber>
Informational
Destroy a DHCPv6 interface node successfully
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Destroyed pool <PoolName>
Informational
Destroy the pool node successfully
<PoolName> Pool name
dhcp6sClientPacketRecv: intf=<InterfaceNumber>,
<InterfaceNumber> not DHCPv6 enabled
December/2018 217
Message Collection
Informational
FUJITSU PSWITCH
Packet was received at specific interface whose DHCPv6 admin mode is not enabled
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
dhcp6sClientPacketRecv: short packet on intf=<InterfaceNumber>,
<InterfaceNumber>
Informational
Packet length is too short and the packet will be dropped
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
dhcp6sServerPacketRecv: short packet on intf=<InterfaceNumber>,
<InterfaceNumber>
Informational
Packet length is too short and the packet will be dropped
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Discarding DHCPv6 <Dhcp6MessageType> packet received on interface
<InterfaceNumber>, <InterfaceNumber> - not in SERVER or RELAY mode
Informational
The DHCPv6 packet only can be handled at interface which is SERVER mode or
RELAY mode
<Dhcp6MessageType> "msg", "solicit", "advertise", "request", "confirm", "renew",
"rebind", "reply"...
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Error processing DHCPv6 <Dhcp6MessageType> message received on interface <InterfaceNumber>, <InterfaceNumber>
218 December/2018
FUJITSU PSWITCH
Informational
Message Collection
Failed to process DHCPv6 packets at server mode interface
<Dhcp6MessageType> "msg", "solicit", "advertise", "request", "confirm", "renew",
"rebind", "reply"...
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to convert DUID string from received binding entry
Informational
Failed to convert DUID string from received binding entry
Failed to receive data on DHCPv6 client socket
Informational
Failed to receive data on DHCPv6 client socket
Failed to receive data on DHCPv6 server socket
Informational
Failed to receive data on DHCPv6 server socket
Generated new server DUID: <ID>
Informational
Show new server DUID
<ID> ID
MANUAL POOL <PoolName> created
Informational
Create specific memory pool successfully
<PoolName> Pool name
MANUAL POOL <PoolName> creation failed
December/2018 219
Message Collection
Informational
Failed to create specific memory pool
<PoolName> Pool name
FUJITSU PSWITCH
MANUAL POOL creation failed, NULL passed
Informational
Check input parameters in dhcp6sCreateManualPool() function
Max host address in the pool is = <IP6Address>
Informational
Update the maximum addresses in the pool prefix
<IP6Address> IPv6 address
Min host address in the pool is = <IP6Address>
Informational
Update the minimum addresses in the pool prefix
<IP6Address> IPv6 address
Node <MemoryAddress> obj <MemoryAddress> prev <MemoryAddress> next <MemoryAddress>
Informational
Dump all link list node information
<MemoryAddress> Memory address
Pool node already exists for name <PoolName>
Informational
Create specific memory pool, but the pool name has existed
<PoolName> Pool name
server6_recv: failed to parse DHCPv6 options from <IP6Address>
(intf=<InterfaceNumber>, <InterfaceNumber>)
220 December/2018
FUJITSU PSWITCH
Informational
Message Collection
Failed to parse DHCPv6 options from specific interface
<IP6Address> IPv6 address
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
server6_recv: ignoring DHCPv6 relay-reply message from
<IP6Address> (intf=<InterfaceNumber>, <InterfaceNumber>)
Informational
A server never receives a relay-reply message. Since relay reply messages will annoy option parser below, we explicitly reject them here
<IP6Address> IPv6 address
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
server6_recv: invalid unicast DHCPv6 message from intf=<InterfaceNumber>, <InterfaceNumber>
Informational
A server MUST discard any Solicit, Confirm, Rebind or Information-request messages it receives with a unicast destination address
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Unable to add address list to host duid=<ID>
Informational
Failed to add address information to specific host's database
<ID> ID
Unable to add prefix to host duid=<ID>
Informational
Failed to add prefix information to specific host's database
<ID> ID
Unable to allocate memory for host duid=<ID>
December/2018 221
Message Collection
Informational
Unable to allocate memory for a host
<ID> ID
FUJITSU PSWITCH
Unable to delink host duid=<ID> in pool <PoolName>
Informational
Unable to delink pool node from active pools. The link node may have invalid point address
<ID> ID
<PoolName> Pool name
Unable to remove prefix from host duid=<ID>
Informational
Unable to remove prefix information from specific host's database
<ID> ID
Using saved server DUID: <ID>
Informational
Show current saved server DUID
<ID> ID
Failed to change host name to <HostName>. Host name is already configured for the client
Warning
Failed to change host name. Host name is already configured for the client
<HostName> Host name
2.1.16.
DOT1Q
Received unknown NIM intIfState <State>
222 December/2018
FUJITSU PSWITCH
Alert
Received an unknown interface.
<State> State
Message Collection
Intf(<InterfaceNumber>) not configurable
Debug
The interface is not configurable.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
VLAN(<VlanID>) already associated with vlan(<VlanID>)
Debug
VLAN is already associate with other primary VLAN.
<VlanID> VLAN ID
<InterfaceNumber> is not configurable, but we are tying to process
Vlan membership
Error
The interface cannot be set and unavailable.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Access Mode cannot be allowed
Error
Access Mode cannot be allowed
Access Mode cannot have tagged members
Error
Access Mode cannot have tagged members
Attempt to create a vlan (<VlanID>) that already exists
December/2018 223
Message Collection
Error
Input VLAN is already in VLAN database.
<VlanID> VLAN ID
FUJITSU PSWITCH
Attempt to create a vlan with an invalid vlan id <VlanID>. This accommodates for reserved vlan ids. i.e. 4094 - x.
Error
The input VLAN ID is out of range.
<VlanID> VLAN ID
Attempt to set access vlan with (<VlanID>) that does not exist
Error
VLAN is not found in VLAN database.
<VlanID> VLAN ID
Attempt to set access vlan with an invalid vlan id <VlanID>
Error
VLAN ID is out of range.
<VlanID> VLAN ID
Can not delete the VLAN, Some unknown component has taken the ownership!
Error
The ownership has been taken and no actual deletion occurred.
Cannot configure operational VLAN tagging for an access port
<InterfaceNumber>
Error
Cannot configure VLAN tagging for this access port.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Cannot configure operational VLAN tagging for trunk port
<InterfaceNumber> on native vlan <ID>
224 December/2018
FUJITSU PSWITCH
Error
Message Collection
Cannot configure VLAN tagging for this trunk port.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<ID>
0/1, 0/0/1
ID
Cannot configure VLAN membership for an access port
<InterfaceNumber>
Error
Cannot configure VLAN membership on this port.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Cannot configure VLAN tagging for an access port <InterfaceNumber>
Error
Cannot configure VLAN tagging on this port.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Cannot find vlan <VlanID> to convert it to static
Error
Failed to find the dynamic VLAN in database to convert it to static.
<VlanID> VLAN ID
Cannot get the access vlan for Interface: <InterfaceNumber>
Error
The interface cannot get the access vlan.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Cannot get the switchport mode Interface: <InterfaceNumber>
December/2018 225
Message Collection
Error
FUJITSU PSWITCH
Cannot get the switchport mode.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Cannot put a message on dot1q msg Queue, Returns:<ErrorCode>
Error
Cannot put a message on dot1q msg Queue.
<ErrorCode> Error code
Cannot put a message on dot1q msg Queue, Returns:<ErrorCode>
Error
Cannot put a message on dot1q msg Queue.
<ErrorCode> Error code
Cannot set membership for user interface<InterfaceNumber> on management vlan <ID>
Error
Cannot set the membership.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<ID>
0/1, 0/0/1
ID
Cannot set pvid, Vlan(<VlanID>) not present
Error
The vlan ID is not present.
<VlanID> VLAN ID
dot1qTask: unsuccessful return code on receive from dot1qMsgQueue: <ErrorCode>
Error
Failed to retrieve a message from message queue.
<ErrorCode> Error code
DTL call to create VLAN <VlanID> failed with rc <ErrorCode>
226 December/2018
FUJITSU PSWITCH
Error
Failed to create VLAN in driver.
<VlanID> VLAN ID
<ErrorCode> Error code
Message Collection
dtl failure when adding ports to tagged list for vlan id <VlanID>
- portMask = <Mask>
Error
Failed to add ports to VLAN in driver when completing the tagging process.
<VlanID> VLAN ID
<Mask> Mask value
dtl failure when adding ports to vlan id <VlanID> - portMask =
<Mask>
Error
Failed to add ports to VLAN in driver when completing the vlan participation process.
<VlanID> VLAN ID
<Mask> Mask value
dtl failure when deleting ports from tagged list for vlan id
<VlanID> - portMask = <Mask>
Error
Failed to delete ports from VLAN in driver when completing the tagging process..
<VlanID> VLAN ID
<Mask> Mask value
dtl failure when deleting ports from vlan id <VlanID> - portMask
= <Mask>
Error
Failed to delete ports from VLAN in driver when completing the vlan participation process.
<VlanID> VLAN ID
<Mask> Mask value
dtl request failure when modifying tagging for interface
<InterfaceNumber>
December/2018 227
Message Collection
Error
FUJITSU PSWITCH
Failed to configure VLAN interface in driver.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
dtl request failure when modifying vlan membership of interface
<InterfaceNumber>
Error
Failed to configure VLAN interface in driver.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Dynamic entry <VlanID> can only be modified after it is converted to static.
Error
VLAN has to be static to be modified.
<VlanID> VLAN ID
Dynamic entry <VlanID> can only be modified after it is converted to static. If this vlan is a learnt via GVRP then we cannot modify its member set via management.
Error
The dynamic entry can only be modified after it is converted to static.
<VlanID> VLAN ID
Error accessing DOT1Q config data for interface <InterfaceNumber> in dot1qMapIntfIsConfigurable. A default configuration does not exist for this interface. Typically a case when a new interface is created and has no pre-configuration.
Error
Either a table management error between dvlantagCfg and dvlantagMapTbl or there is a synchronization issue between NIM and components w.r.t interface creation/deletion.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Error in updating data for VLAN <VlanID> in VLAN database
228 December/2018
FUJITSU PSWITCH
Error
Message Collection
Failed to add new VLAN into VLAN database. The database might be corrupted.
<VlanID> VLAN ID
Error in Updating VLAN <VlanID> to VLAN database!
Error
Failed to add new VLAN into VLAN database. The database might be corrupted.
<VlanID> VLAN ID
ERROR!!Multicast VLAN cannot be configured on MVR receiver port.
Error
Multicast VLAN cannot be configured on MVR receiver port.
Failed to create vlan <VlanID>, as it is already configured
Error
The given vlan is already configured.
<VlanID> VLAN ID
Failed to delete vlan <VlanID>, it is not a configured vlan
Error
The given vlan is not configured.
<VlanID> VLAN ID
Failed to delete, Auto-Video VLAN <ID> cannot be deleted
Error
Auto-Video VLAN cannot be deleted.
<ID> ID
Failed to delete, Default VLAN <VlanID> cannot be deleted
Error
thd default VLAN cannot be deleted.
<VlanID> VLAN ID
Failed to delete, Management VLAN <VlanID> cannot be deleted
December/2018 229
Message Collection
Error
Management VLAN cannot be deleted.
<VlanID> VLAN ID
FUJITSU PSWITCH
Failed to post the message to dot1q msg queue for creating a VLAN routing intf on VLAN <VlanID>.
Error
Failed to send a message to dot1q message queue for creating VLAN routing interface on the VLAN.
<VlanID> VLAN ID
Failed to post the message to dot1q msg queue for deleting a VLAN routing intf on VLAN <VlanID>.
Error
Failed to send a message to dot1q message queue for deleting VLAN routing interface on the VLAN.
<VlanID> VLAN ID
Failed to set DHCP on routing management interface
Error
Failed to set DHCP on routing management interface
Failed to set native vlan for the interface(<InterfaceNumber>) as the Vlan(<VlanID>) is not configurable
Error
Failed to set native vlan for the interface as the Vlan is not configurable.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<VlanID>
0/1, 0/0/1
VLAN ID
Incorrect mode entered
Error
Invaild switchmode is detected.
Incorrect mode entered mode = <Dot1qSwitchPortMode>
230 December/2018
FUJITSU PSWITCH
Error
Invaild switchmode is detected.
<Dot1qSwitchPortMode> "DOT1Q_SWPORT_MODE_ACCESS",
"DOT1q_SWPORT_MODE_TRUNK" ...
Message Collection
Incorrect switchport mode <Dot1qSwitchPortMode>
Error
Invaild switchmode is detected.
<Dot1qSwitchPortMode> "DOT1Q_SWPORT_MODE_ACCESS",
"DOT1q_SWPORT_MODE_TRUNK" ...
Incorrect switchport mode for vlan participation. Mode:
<Dot1qSwitchPortMode> Interface: <InterfaceNumber>
Error
Incorrect switchport mode for vlan participation.
<Dot1qSwitchPortMode> "DOT1Q_SWPORT_MODE_ACCESS",
"DOT1q_SWPORT_MODE_TRUNK" ...
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Incorrect tagmode for vlan tagging. tagmode: <TagMode> Interface:
<InterfaceNumber>
Error
Incorrect tag mode for vlan tagging.
<TagMode> Tag mode
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Intf(<InterfaceNumber>) not configurable
Error
The interface is not configurable.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Invalid dot1q Interface: <InterfaceNumber>
December/2018 231
Message Collection
Error
FUJITSU PSWITCH
Invalid dot1q Interface
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Invalid Input
Error
Invalid Input.
Invalid Membership
Error
Invalid Membership.
Invalid Switch port mode
Error
Invalid Switch port mode.
Invalid vlan <VlanID> used.
Error
The interface isn't in the right type for vlan.
<VlanID> VLAN ID
Not valid permision to delete the VLAN <VlanID>
Error
VLAN should belong to its requestor in order to perform deletion.
<VlanID> VLAN ID
Not valid permision to delete the VLAN <VlanID> requestor <ID>
Error
VLAN should belong to its requestor in order to perform deletion.
<VlanID> VLAN ID
<ID> ID
Only Dynamically created vlans can be converted
232 December/2018
FUJITSU PSWITCH
Error
Message Collection
Only Dynamically created vlans can be converted to static VLAN.
Port <VlanID> is tried to remove from access VLAN
<InterfaceNumber>
Error
The port is tried to remove from the access vlan.
<VlanID> VLAN ID
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Port is forbidden member in Vlan(<VlanID>)
Error
Port is forbidden member in Vlan.
<VlanID> VLAN ID
Port(<InterfaceNumber>) with switchport mode Access cannot be forbidden in configured access vlan
Error
The port cannot be forbidden in configured access vlan.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Port(<InterfaceNumber>) with switchport mode Access cannot participate in any vlan
Error
The port cannot participate in any vlan.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Primary vlan(<VlanID>) cannot be associated to itself
Error
Primary VLAN cannot be associated to itself
<VlanID> VLAN ID
Problem deleting data for VLAN <VlanID>
December/2018 233
Message Collection
Error
Failed to delete VLAN in VLAN database.
<VlanID> VLAN ID
FUJITSU PSWITCH
Problem unrolling data for VLAN <VlanID>
Error
Failed to delete VLAN entry from VLAN database when trying to cancel VLAN creation.
<VlanID> VLAN ID
Remove list cannot be allowed
Error
Remove list cannot be allowed.
Requestor <ID> attempted to release internal vlan <VlanID>: owned by <Dot1qVlanType>
Error
Requestor try to release the vlan which now owned by it.
<ID> ID
<VlanID> VLAN ID
<Dot1qVlanType> The type for Dot1q VLAN
Unable to apply VLAN creation request for VLAN ID <VlanID>,
Database reached MAX VLAN count!
Error
Database is full, it has reached MAX VLAN count.
<VlanID> VLAN ID
Unknown NIM startup event <NimStartupPhaseNumber>
Error
Possible communication error between dot1q and NIM.
<NimStartupPhaseNumber> NIM startup phase number
VLan <VlanID> does not exist
234 December/2018
FUJITSU PSWITCH
Error
Message Collection
VLAN is not found in VLAN database. There is nothing to be deleted.
<VlanID> VLAN ID
Vlan <VlanID> is not Access Vlan for the port <InterfaceNumber>
Error
The vlan is not the access vlan to the port.
<VlanID> VLAN ID
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
VLAN <VlanID> not in range
Error
Vlan is not in range.
<VlanID> VLAN ID
VLan <VlanID> requestor type <ComponentID> does not exist
Error
Failed to retrieve VLAN type. Detected unknown requestor type.
<VlanID> VLAN ID
<ComponentID> Component ID
Vlan acceptable fram type can only be configured for General port mode <InterfaceNumber>
Error
Switchmode has to be general port mode to modify ingress filter value.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
VLAN create currently underway for VLAN ID <VlanID>
Error
Someone is creating VLAN.
<VlanID> VLAN ID
VLAN Delete Call failed in driver for vlan <VlanID>
December/2018 235
Message Collection
Error
Failed to delete VLAN in driver.
<VlanID> VLAN ID
FUJITSU PSWITCH
VLAN does not exist <VlanID>
Error
VLAN does not exist.
<VlanID> VLAN ID
VLAN ID <VlanID> is already exists as static VLAN
Error
The VLAN ID is already exist.
<VlanID> VLAN ID
Vlan not valid <VlanID>
Error
VLAN ID is out of range.
<VlanID> VLAN ID
VLAN(<VlanID>) is set as primary
Error
VLAN shouldn't be primary.
<VlanID> VLAN ID
VLAN(<VlanID>) not associated with the same primary vlan
Error
The secondary VLAN is not associated with the same primary VLAN.
<VlanID> VLAN ID
nimIntfQuery failed for intf <InterfaceNumber>
236 December/2018
FUJITSU PSWITCH
Informational
Message Collection
Failed to retrieve information about an interface.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
nimIntfQuery failed for intf <InterfaceNumber> in delete attempt
Informational
Failed to retrieve information about an interface.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<FunctionName>: nimGetHighestIntfNumber failed
Informational
Incorrect interface number.
<FunctionName> Log is created by this function.
Attempt to set native vlan with (<VlanID>) that does not exist
Informational
VLAN is not found in VLAN database.
<VlanID> VLAN ID
Attempt to set native vlan with an invalid vlan id <VlanID>
Informational
VLAN ID is out of range.
<VlanID> VLAN ID
Bad rc <ErrorCode> in vlanNotifyRegisteredUsers for registrar
<ComponentID>, <ComponentName>
Informational
The registered component returned a bad return code.
<ErrorCode> Error code
<ComponentID> Component ID
<ComponentName> Component name
Cannot change <VlanID> vlan participation while Auto-Video feature is enabled
December/2018 237
Message Collection
Informational
FUJITSU PSWITCH
Cannot change vlan participation while Auto-Video feature is enabled.
<VlanID> VLAN ID
Cannot get first valid NIM Interface number
Informational
Cannot get first valid NIM Interface number.
Cannot get intfIndex for the vlan <VlanID>
Informational
Failed to get VLAN interface index.
<VlanID> VLAN ID
Cannot modify membership of interface <InterfaceNumber> to non existance vlan <VlanID>
Informational
VLAN does not exist.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<VlanID>
0/1, 0/0/1
VLAN ID
Cannot process interface callback while outside the EXECUTE state
Informational
Cannot process interface callback while outside the EXECUTE state
Cannot set the membership for interface on Auto-Voip VLAN
<VlanID>
Informational
Because of the given vlan id is not configurable.
<VlanID> VLAN ID
Cannot set the membership for interface <InterfaceNumber> on
Auto-Voip VLAN <VlanID>
238 December/2018
FUJITSU PSWITCH
Informational
Message Collection
Cannot set the membership.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<VlanID>
0/1, 0/0/1
VLAN ID
Cannot update driver for interface vlan id <VlanID>
Informational
Failed to update VLAN ports in driver when completing the vlan participation process.
<VlanID> VLAN ID
Could not get nimMaskIdOffset for Interface <InterfaceNumber>
Informational
Could not get the configuration mask offset.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
delete notification failed for intf <InterfaceNumber>
Informational
Failed to notify all interested components of a delete event.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Deleting the default VLAN
Informational
Trying to delete default VLAN.
detach notification failed for intf <InterfaceNumber>
Informational
Failed to notify all interested components of a detach event.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
dot1q vlan intIf link state cannot be determined for intf
<InterfaceNumber>/ vlanId <VlanID>
December/2018 239
Message Collection
Informational
FUJITSU PSWITCH
Unable to retrieve link state of this VLAN interface.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<VlanID>
0/1, 0/0/1
VLAN ID
dot1q vlan intIf state is not in CREATE_PENDING for intf
<InterfaceNumber>/vlanid <VlanID>
Informational
The VLAN interface is in unexpected state.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<VlanID> VLAN ID
dot1q vlan intIf state is not VALID for intf <InterfaceNumber>/ vlanId <VlanID>
Informational
The VLAN interface is in unexpected state.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<VlanID>
0/1, 0/0/1
VLAN ID
DOT1Q: dtl failed to create an interface for vlan <VlanID>
Informational
Failed to create logical interface for VLAN in driver.
<VlanID> VLAN ID
DOT1Q: dtl failed to delete an interface for intf
<InterfaceNumber>
Informational
Failed to delete logical interface for VLAN in driver.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
DOT1Q: dtl failed to delete an interface for intf
<InterfaceNumber> vlan <VlanID>
240 December/2018
FUJITSU PSWITCH
Informational
Message Collection
Failed to delete logical interface for VLAN in driver.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<VlanID>
0/1, 0/0/1
VLAN ID
DOT1Q: failed to create the interface for vlanId <VlanID>
Informational
Failed to create the interface for VLAN
<VlanID> VLAN ID
DOT1Q: failed to get the MAC address of vlan <VlanID>
Informational
Failed to get the MAC address for VLAN
<VlanID> VLAN ID
DOT1Q: Failed to put comamnd : <Command> configurator message in queue.
Informational
Failed to put comamnd configurator message in queue.
<Command> Command
DOT1Q: notification failed for event(<EventName>), intf(<InterfaceNumber>), reason(<ErrorCode>)
Informational
There is an error on NIM module side.
<EventName> Event name
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<ErrorCode> Error code
DOT1Q: Unable to register with DTL
Informational
Unable to register with DTL.
DOT1Q: Unable to register with NIM
December/2018 241
Message Collection
Informational
Maybe the register ID is out of range.
FUJITSU PSWITCH
dot1qInit: msgQueue creation error.
Informational
MsgQueue creation error.
dot1qNimEventCompletionCallback: intf <InterfaceNumber> not valid
Informational
The interface number for a vlan is not valid.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
dot1qNimEventCompletionCallback: intf = <InterfaceNumber>, vlanId <VlanID> check invalid
Informational
Invaild VLAN ID.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<VlanID> VLAN ID
dot1qNimEventCompletionCallback: intf = <VlanID>, nimEventIntfNotify failed
Informational
Failed to notify all interested components of an VLAN Interface Change event.
<VlanID> VLAN ID
DTL call failure adding intf <InterfaceNumber> to vlan <VlanID>
Informational
Failed to add port to an existing VLAN.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<VlanID>
0/1, 0/0/1
VLAN ID
DTL call to create VLAN <VlanID> failed with rc <ErrorCode>
242 December/2018
FUJITSU PSWITCH
Informational
Failed to create VLAN in driver.
<VlanID> VLAN ID
<ErrorCode> Error code
Message Collection
dtl failed with err(<ErrorCode>) applying port cfg: interface
<InterfaceNumber>: pvid = <VlanID>,acceptFrameType = <TypeValue>, ingressFiltering = <State>
Informational
Failed to apply port configuration to driver.
<ErrorCode> Error code
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<VlanID>
<TypeValue>
<State>
0/1, 0/0/1
VLAN ID
Type Value
State
dtl failure reverting to default state for intf <InterfaceNumber>
Informational
Configure to default failed.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
dtl failure while modifying accept frame type to <TypeValue> for interface <InterfaceNumber>
Informational
Failed to modify accept frame type for interface in driver.
<TypeValue> Type Value
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
dtl failure while modifying ingress filter value to <State> for interface <InterfaceNumber>
December/2018 243
Message Collection
Informational
FUJITSU PSWITCH
Failed to modify ingress filter value for interface in driver.
<State> State
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
dtl failure while modifying pvid configuration to <VlanID> for interface <InterfaceNumber> and vid_type <TypeValue>
Informational
Failed to modify pvid configuration for interface in driver.
<VlanID> VLAN ID
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<TypeValue>
0/1, 0/0/1
Type Value
dtl request failure when deleting interface <InterfaceNumber>
Informational
Failed to translate interface number to unit/slot/port or error in driver.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
dtl request failure when deleting intf <InterfaceNumber>
Informational
Dtl request failure when deleting the given interface.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Dynamic entry <VlanID> can only be modified after it is converted to static.
Informational
VLAN has to be static to be modified.
<VlanID> VLAN ID
Error accessing DOT1Q config data for VLAN <VlanID> in dot1qVlanIsConfigurable
244 December/2018
FUJITSU PSWITCH
Informational
Message Collection
Either a table management error between dvlantagCfg and dvlantagMapTbl or there is a synchronization issue between NIM and components w.r.t interface creation/deletion.
<VlanID> VLAN ID
Error creating Dot1q Internal Vlan Semaphore
Informational
Error creating Dot1q Internal Vlan Semaphore.
Error creating Dot1q Semaphore
Informational
Error creating Dot1q Semaphore.
Error creating dot1qCfgRWlock semaphore
Informational
Error creating dot1qCfgRWlock semaphore.
Error creating dot1qVlanCount Semaphore
Informational
Error creating dot1qVlanCount Semaphore.
Error on call to sysapiCfgFileWrite routine on config file
<FileName>
Informational
Can't write to the file. Check your file name is correct.
<FileName> Log is created by this file.
Error pointing to DOT1Q config data for VLAN <VlanID>
December/2018 245
Message Collection
Informational
FUJITSU PSWITCH
This VLAN is not available. There might be a synchronization issue or table management error.
<VlanID> VLAN ID
failed to add any trunk ports to the system
Informational
Failed to find the valid trunk ports which can be added to the VLAN
Failed to create an instance for intf <InterfaceNumber> in dot1q
Informational
Failed to create an instance.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to create dot1q task
Informational
Failed to create dot1q task.
Failed to create statistics for intf <InterfaceNumber> in dot1q
Informational
Failed to create statistics.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to issue command for startup phase <NimStartupPhaseNumber>
Informational
Place a command on the dot1q message queue failed.
<NimStartupPhaseNumber> NIM startup phase number
Failures occurred in setting default VLAN configuration
246 December/2018
FUJITSU PSWITCH
Informational
Failures occurred in setting default VLAN configuration.
Message Collection
Incorrect mode for vlan participation. Mode: <Dot1qPortMode>
Interface: <InterfaceNumber>
Informational
Incorrect mode for vlan participation.
<Dot1qPortMode> "L7_DOT1Q_FIXED", "L7_DOT1Q_NORMAL_REGISTRATION",
"L7_DOT1Q_FORBIDDEN"
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Incorrect mode for vlan participation. Mode:
<Dot1qSwitchPortMode> Interface: <InterfaceNumber>
Informational
Incorrect mode for vlan participation.
<Dot1qSwitchPortMode> "DOT1Q_SWPORT_MODE_ACCESS",
"DOT1q_SWPORT_MODE_TRUNK" ...
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Incorrect switchport mode for vlan participation. Mode:
<Dot1qSwitchPortMode> Interface: <InterfaceNumber>
Informational
Incorrect switchport mode for vlan participation.
<Dot1qSwitchPortMode> "DOT1Q_SWPORT_MODE_ACCESS",
"DOT1q_SWPORT_MODE_TRUNK" ...
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Interface <InterfaceNumber> should not be in state <State>
December/2018 247
Message Collection
Informational
FUJITSU PSWITCH
Interface is in unexpected state during deletion.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<State>
0/1, 0/0/1
State
Interface is not attached or attaching <InterfaceNumber>
Informational
The interface cannot be set and unavailable.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Intf is not configurable: Interface: <InterfaceNumber>
Informational
The given interface is not configurable.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Invalid dot1q Interface: <InterfaceNumber>
Informational
Invalid interface.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Invalid intIfNum = <InterfaceNumber>
Informational
The internal interface number is invalid.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Invalid Port List. Cannot configure VLAN tagging for an access or trunk port <InterfaceNumber>
248 December/2018
FUJITSU PSWITCH
Informational
Message Collection
Invalid Port List. Cannot configure VLAN tagging for an access or trunk port.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
link down notification failed for vlan <VlanID>, intf
<InterfaceNumber>
Informational
Failed to notify all interested components of a link down event.
<VlanID> VLAN ID
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Mode:<Dot1qSwitchPortMode> - Cannot set membership for interface
<InterfaceNumber> on non existent vlan <VlanID>
Informational
Incorrect switch port mode.
<Dot1qSwitchPortMode> "DOT1Q_SWPORT_MODE_ACCESS",
"DOT1q_SWPORT_MODE_TRUNK" ...
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<VlanID> VLAN ID
Problem resetting pending VLAN create request for VLAN <VlanID>
Informational
Failed to clear pending VLAN create request. The entry is not found.
<VlanID> VLAN ID
Received a interface callback while outside the EXECUTE state
Informational
Received a interface callback while outside the EXECUTE state
Received a interface startup callback while outside the EXECUTE state. Did not process phase <NimStartupPhaseNumber>
December/2018 249
Message Collection
Informational
The dot1q's config state "dot1qCnfgrState" is not ready.
<NimStartupPhaseNumber> NIM startup phase number
FUJITSU PSWITCH
Tech Support Registration failed for VLAN related commands
Informational
Tech Support Registration failed for VLAN related commands.
Unable to activate interface intf <InterfaceNumber>
Informational
Unable to activate interface.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Unable to apply interface config for intf <InterfaceNumber>
Informational
Unable to apply interface config.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Unable to initialize dot1s_task()
Informational
Unable to initialize dot1s_task
Unable to issue cnfgr event
Informational
Unable to send message to dot1qMsgQueue.
Unable to register for VLAN change callback!
Informational
Maybe the register ID is out of range.
Unable to set dot1d default priority (<Priority>) on interface
<InterfaceNumber>
250 December/2018
FUJITSU PSWITCH
Informational
Message Collection
Failed to set dot1d default priority on interface in driver.
<Priority> Priority
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Unable to set dot1d priority <Priority> to traffic class <ID> on interface <InterfaceNumber>
Informational
Failed to set dot1d priority to a traffic class on interface.
<Priority> Priority
<ID> ID
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Unable to set global dot1d default priority (<Priority>) on interface <InterfaceNumber>
Informational
Failed to set one of interfaces to global dot1d default priority value.
<Priority> Priority
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Unable to set global dot1d number of traffic classes (<ID>) on interface <InterfaceNumber>
Informational
Failed to set one of interfaces to global dot1d number of traffic classes.
<ID> ID
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Unable to set global dot1d priority <Priority> to traffic class
<ID> on interface <InterfaceNumber>
December/2018 251
Message Collection
Informational
FUJITSU PSWITCH
Failed to set one of interfaces to global dot1d priority to a traffic class
<Priority> Priority
<ID> ID
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Unable to set one or more dot1d port priority mappings on interface
<InterfaceNumber>
Informational
Failed to set one or more dot1d port priority mappings on the interface.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Unknown Event <Dot1qEvent> received
Informational
Received an unknown message that retrieved from the dot1q message queue.
Possible communication error between dot1q and other module.
<Dot1qEvent> "dot1q_vlan_create_static", "dot1q_delete_static" ...
VLAN <VlanID> is out of range. Valid range is <MinValue> to
<MaxValue>.
Informational
Vlan is out of range. Make sure the range is valid.
<VlanID> VLAN ID
<MinValue> Minimum value
<MaxValue> Maximum value
vlan id <VlanID> cannot use index <VlanID> - already in use for vlan <VlanID>
Informational
VLAN interface index is in use.
<VlanID> VLAN ID
VLAN registrar ID <ComponentID> greater than L7_LAST_COMPONENT_ID
252 December/2018
FUJITSU PSWITCH
Informational
Invaild component ID.
<ComponentID> Component ID
Message Collection
Cannot configure operational VLAN tagging for the port
<InterfaceNumber> and VLAN <VlanID> as this port is not a member of the VLAN
Notice
Failed to configure VLAN tagging for the port and VLAN, this port is not a member of the VLAN.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<VlanID>
0/1, 0/0/1
VLAN ID
Cannot modify tagging for port <InterfaceNumber> for vlan <VlanID> as this port is not a member of the vlan
Notice
Failed to configure VLAN tagging for the port and VLAN, this port is not a member of the VLAN.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<VlanID>
0/1, 0/0/1
VLAN ID
Cannot modify tagging of interface <InterfaceNumber> to non existance vlan <VlanID>
Notice
VLAN does not exist.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<VlanID> VLAN ID
Deleting the default VLAN. Typically encountered during clear Vlan and clear config
December/2018 253
Message Collection
Notice
Trying to delete default VLAN.
FUJITSU PSWITCH
dtl failure while modifying ingress filter to default for intf
<InterfaceNumber>
Notice
Dtl failure while modifying ingress filter to default.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Dynamic VLAN entry <VlanID> can only be modified after it is converted to static.
Notice
VLAN has to be static to be modified.
<VlanID> VLAN ID
VLAN (<VlanID>) is out of range. Valid range is <MinValue> to
<MaxValue>.
Notice
VLAN ID is out of range.
<VlanID>
<MinValue>
<MaxValue>
VLAN ID
Minimum value
Maximum value
VLAN interface table is full. Cannot create interface for VLAN
<VlanID>
Notice
VLAN interface table is full.
<VlanID> VLAN ID
Default vlan(<VlanID>) cannot be associated to a private vlan
Warning
Default VLAN cannot be associated to itself
<VlanID> VLAN ID
Default vlan(<VlanID>) cannot be enabled for private vlan
254 December/2018
FUJITSU PSWITCH
Warning
Default VLAN cannot be enabled for private vlan
<VlanID> VLAN ID
Message Collection
failure getting pCfg for interface <InterfaceNumber>
Warning
Unable to get config of interface. It might be unavailable.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Interface <InterfaceNumber> is an Access port. Hence this interface can only participate in Access VLAN <VlanID>
Warning
The interface is an Access port. Hence this interface can only participate in the
Access VLAN.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<VlanID> VLAN ID
Intf(<InterfaceNumber>) Already associated with other vlan
Warning
The interface is associated with other primary VLAN instead.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Intf(<InterfaceNumber>) not configurable
Warning
The interface is unavailable.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Management vlan(<VlanID>) cannot be enabled for private vlan
December/2018 255
Message Collection
Warning
Management VLAN cannot be enabled for private vlan
<VlanID> VLAN ID
Primary Vlan <VlanID> does not exist.
Warning
Input Primary VLAN does not exist.
<VlanID> VLAN ID
Primary VLAN(<VlanID>) not valid
Warning
This primary VLAN is invaild. It might not be a Primary VLAN.
<VlanID> VLAN ID
FUJITSU PSWITCH
private vlan domain creation failed: Max private vlan domains created
Warning
Reached max Private vlan domains. Cannot create more private VLAN.
Private VLANS can only be configured when Dynamic VLAN creation is disabled
Warning
Private VLANS can only be configured when Dynamic VLAN creation is disabled
RSPAN vlan(<VlanID>) cannot be enabled for private vlan
Warning
RSPAN VLAN cannot be enabled for private vlan
<VlanID> VLAN ID
Secondary vlan (<VlanID>) cannot be same as primary vlan
256 December/2018
FUJITSU PSWITCH
Warning
Secondary VLAN cannot be same as primary VLAN
<VlanID> VLAN ID
Secondary Vlan <VlanID> does not exist.
Warning
Input Secondary VLAN does not exist.
<VlanID> VLAN ID
Vlan <VlanID> does not exist.
Warning
VLAN does not exist.
<VlanID> VLAN ID
Message Collection
VLAN <VlanID> is already associated
Warning
VLAN is already associated with other VLANs
<VlanID> VLAN ID
VLAN(<VlanID>) does not exist
Warning
VLAN does not exist.
<VlanID> VLAN ID
VLAN(<VlanID>) is associated with vlan <VlanID>
Warning
VLAN is already associate with other primary VLAN.
<VlanID> VLAN ID
Vlan(<VlanID>) is not the primary vlan of Intf(<InterfaceNumber>)
December/2018 257
Message Collection
Warning
FUJITSU PSWITCH
The input VLAN is not primary.
<VlanID> VLAN ID
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
VLAN(<VlanID>) not valid secondary VLAN
Warning
This is not valid secondary VLAN.
<VlanID> VLAN ID
VLAN:(<VlanID>) is already configured as isolated VLAN, cannot configure VLAN:(<VlanID>) as isolated VLAN
Warning
Failed to get the Isolated VLAN based on Primary VLAN in a private VLAN domain
<VlanID> VLAN ID
2.1.17.
DOT1S
Cannot allocate memory for dot1s mlag transport buffer
Alert
Failed to allocate memory.
Cannot allocate memory for dot1s transport buffer
Alert
Failed to allocate buffers.
Cannot allocate memory for local helper database
Alert
Failed to allocate memory.
Cannot allocate memory for mlag helper database
258 December/2018
FUJITSU PSWITCH
Alert
Failed to allocate memory.
Message Collection
Cannot create empty sync semaphore for dot1s mlag transport task
Alert
Failed to create semaphore.
Cannot create empty sync semaphore for dot1s transport task
Alert
Failed to create semaphore.
Cannot create semaphore for dot1s mlag transport task
Alert
Failed to create semaphore.
Cannot create semaphore for dot1s transport task
Alert
Failed to create semaphore.
Error: Reached the limit on number of recurring state machine events
Alert
Reached the limit on number of recurring state machine events.
Failed to initialize the MLAG Check point sub system for DOT1S.
Alert
Failed to initialize the MLAG Check point sub system for DOT1S.
Failed to register to check point service
Alert
Failed to register to check point service.
Failed to register with check point service
December/2018 259
Message Collection
Alert
Failed to register with check point service.
FUJITSU PSWITCH
Failed to register with SIM Periodic Timer Service
Alert
Failed to register with SIM Periodic Timer Service.
Buffer allocation failed. TCN not transmitted on interface
<InterfaceNumber>.
Critical
Failed to allocate buffer to tansmit TCN.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Cannnot put message on the helper message queue rc <ErrorCode>
Critical
Failed to send messgae.
<ErrorCode> Error code
Cannot allocate memory for dot1s mlag
Critical
Failed to allocate memory.
Cannot allocate memory for dot1s NSF
Critical
Failed to allocate memory.
Cannot take dot1sTaskSyncSema rc <ErrorCode>
260 December/2018
FUJITSU PSWITCH
Critical
Failed to take semaphore.
<ErrorCode> Error code
Message Collection
Dot1s Msg Queue is full!!!!Event: <EventID>, on interface:
<InterfaceNumber>, for instance: <InstanceID>. The message Queue is full.
Critical
The message queue is full.
<EventID> Event ID
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<InstanceID> Instance ID
dot1sBpduTransmit(): could not get a buffer. Out of system buffers
Critical
Failed to get buffer.
dot1sInit: msgQueue creation error.
Critical
Failed to create message queue.
dot1sInit: task creation error.
Critical
Failed to create task.
dot1sInit: timer task creation error.
Critical
Failed to create task.
dot1sPvstBpduTransmit(): could not get a buffer. Out of system buffers
December/2018 261
Message Collection
Critical
Failed to get buffer.
FUJITSU PSWITCH
dot1sStateSetCallback is deregistered
Critical
dot1sStateSetCallback is deregistered.
Event <EventID> Dot1s Msg count in Queue is <CountValue>, on interface: <InterfaceNumber>.
Critical
Failed to send messgae.
<EventID> Event ID
<CountValue> Count Value
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to allocate memory for dot1s Mlag check point sub system
Critical
Failed to allocate memory.
Failed to allocate memory for dot1s-mlag vlan check point sub system
Critical
Failed to allocate memory.
Failed to send the received message to dot1s mlag helper queue!
Critical
Failed to send messgae.
Failed to send to dot1s mlag helper queue!
Critical
Failed to send messgae.
Failed to send to message to peer !
262 December/2018
FUJITSU PSWITCH
Critical
Failed to send messgae.
Message Collection
Incorrect message type(<TypeValue>) received by the helper
Critical
Receive unexpected event.
<TypeValue> Type Value
Received a state set callback while outside the EXECUTE state
Critical
Received a state set callback while DOT1S is not ready.
Received an empty mlag helper pdu message from Primary on the intfNum <InterfaceNumber> with length <PacketLength>.
Critical
Received an empty mlag helper pdu message.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<PacketLength> Packet length
Unable to add <VlanID> vlan to <InstanceID> instance
Critical
Failed to add vlan to instance.
<VlanID> VLAN ID
<InstanceID> Instance ID
Unable to create dot1s checkpoint semaphore
Critical
Failed to create semaphore.
Unable to create dot1s task semaphore()
December/2018 263
Message Collection
Critical
Failed to create semaphore.
FUJITSU PSWITCH
Unable to create semaphore for dot1s Mlag check point sub system
Critical
Failed to create semaphore.
Unable to initialize dot1s_task()
Critical
Failed to initialize task.
Unable to initialize dot1s_timer_task()
Critical
Failed to initialize task.
Unable to send message to dot1s_stateCB queue
Critical
Failed to send messgae.
Warning : Reached threshold of recurring state machine events
Critical
Reached threshold of recurring state machine events.
Attempted to start uplinkfast lease timer while timer is already running.
Debug
Attempted to start uplinkfast lease timer while timer is already running.
Flushing Dynamic Filtering entries for edgeport <InterfaceNumber>
264 December/2018
FUJITSU PSWITCH
Debug
Message Collection
Flushing Dynamic Filtering entries for edgeport.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Helper failed to transmit PDU on port <InterfaceNumber> return code <ErrorCode>
Debug
Failed to transmit PDU on port.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<ErrorCode>
0/1, 0/0/1
Error code
instIndex(<InstanceID>) call to checkpoint service to start failed(<ErrorCode>)
Debug
Failed to start checkpoint service.
<InstanceID> Instance ID
<ErrorCode> Error code
Set State on MLAG interface <InterfaceNumber> on Secondary to
<StpState> for instance/vlan
Debug
Set port state on MLAG interface.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<StpState> blocking, forwarding, learning, disabled, manual,...
VlanIndex(<VlanID>) call to checkpoint service to start failed(<ErrorCode>)
Debug
Failed to start checkpoint service.
<VlanID> VLAN ID
<ErrorCode> Error code
<FunctionName> (<FileLineNumber>) portnum <InterfaceNumber>
December/2018 265
Message Collection
Error
FUJITSU PSWITCH
Do nothing on port 0 .
<FunctionName> Log is created by this function.
<FileLineNumber> Log is created by this line.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<FunctionName> :Port <InterfaceNumber> inst <InstanceID> VIDList has element 0 numVlans <CountValue>
Error
VIDList has no vlan member.
<FunctionName> Log is created by this function.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<InstanceID>
<CountValue>
Instance ID
Count Value
<FunctionName>: intf <InterfaceNumber> bridge enabled port count zero
Error
The number of enabled port is zero.
<FunctionName> Log is created by this function.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
BPDU size is <PacketLength> bytes and is greater than max expected size(<PacketLength> bytes). Hence failed to forward BPDU recieved on MLAG interface <InterfaceNumber> to Primary.
Error
Failed to forward BPDU due to unexpected BPDU size.
<PacketLength> Packet length
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
BPDU size is <PacketLength> bytes and is greater than max expected size(<PacketLength> bytes). Hence failed to send BPDU to Secondary for forwarding.
266 December/2018
FUJITSU PSWITCH
Error
Failed to send BPDU due to unexpected BPDU size.
<PacketLength> Packet length
Message Collection
Cannot find check pointed data for interface <InterfaceNumber>.
Error
Failed to obtain check point data.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Cannot find check pointed data for port <InterfaceNumber>.
Error
Failed to obtain check point data.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Cannot find dot1s interface handle for interface
<InterfaceNumber>
Error
Failed to obtain interface data.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Cannot find dot1s port for interface <InterfaceNumber>.
Error
Failed to obtain interface data.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Cannot find interface <InterfaceNumber> to diagnostically disable
December/2018 267
Message Collection
Error
FUJITSU PSWITCH
Failed to obtain interface data.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Cannot find interface <InterfaceNumber> to restore from diagnostically disabled state
Error
Failed to obtain interface data.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Cannot find PVST interface handle for interface <InterfaceNumber>
Error
Failed to obtain interface data.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Cannot find VLAN <VlanID> instance handle for interface
<InterfaceNumber>
Error
Failed to obtain vlan instance data for interface.
<VlanID> VLAN ID
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Cannot get dot1s instance number for the index <InstanceID>
Error
Failed to get instance number.
<InstanceID> Instance ID
Cannot get the reconciled data for interface <InterfaceNumber>
268 December/2018
FUJITSU PSWITCH
Error
Message Collection
Failed to obtain reconciled data for interface.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Cannot get the reconciled data for interface <InterfaceNumber> to update interface state.
Error
Failed to obtain reconciled data for interface.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Cannot get USP for port <InterfaceNumber> and bpduIndex <Index>
Error
Failed to obtain helper database.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<Index> Index
Cannot obtain helperDb index from port <InterfaceNumber> bpduIndex <Index>
Error
Failed to obtain helper database.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<Index>
0/1, 0/0/1
Index
Cannot send control message to peer
Error
Failed to send control message to peer.
Cannot set state <StpState> on interface <InterfaceNumber> for vlan index <VlanID> (TxId = <ID>, PVST Intf <InterfaceNumber>, MLAG role <MlagRole>, Interface is VPC interface = <TrueOrFalse>
December/2018 269
Message Collection
Error
FUJITSU PSWITCH
Cannot set state on interface for vlan.
<StpState> blocking, forwarding, learning, disabled, manual,...
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<VlanID>
<ID>
VLAN ID
ID
<MlagRole>
<TrueOrFalse>
Primary or secondary
String; "True", "False"
Data not present
Error
Failed to obtain check point data.
DOT1S MLAG Failure: Cannot register with DOT1S-MLAG for helper timers
Error
Failed to register with MLAG for helper timers.
DOT1S MLAG Failure: Cannot register with MLAG for peer link messages
Error
Failed to register with MLAG for peer link message.
DOT1S Reconciliation failed at <SystemUpTime>: resuming state machines
Error
DOT1S reconciliation failed.
<SystemUpTime> System time since last reset
DOT1S Reconciliation Timer expired at <SystemUpTime>: restarting state machines
270 December/2018
FUJITSU PSWITCH
Error
DOT1S reconciliation timer expired.
<SystemUpTime> System time since last reset
Message Collection
Dot1s State Set timer (<TimeValue> msec) expired for interface
<InterfaceNumber>
Error
Dot1s State Set timer expired for interface.
<TimeValue> Time Value
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
dot1sBpduReceive(): Discarding the BPDU, cannot get buffer from buff pool
Error
Discard received BPDU.
dot1sBpduReceive(): Discarding the BPDU, since it is an invalid
BPDU type
Error
Discard received BPDU.
dot1sBpduReceive(): Discarding the BPDU, Unable to put it on Msg
Queue
Error
Discard received BPDU.
dot1sCB is full interface <InterfaceNumber>, instance ID
<InstanceID> state <StpState>
December/2018 271
Message Collection
Error
FUJITSU PSWITCH
Circular buffer is full.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<InstanceID>
<StpState>
0/1, 0/0/1
Instance ID blocking, forwarding, learning, disabled, manual,...
dot1sCB is full interface <InterfaceNumber>, VLAN instance ID
<VlanID> state <StpState>
Error
Circular buffer is full.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<VlanID>
<StpState>
0/1, 0/0/1
VLAN ID blocking, forwarding, learning, disabled, manual,...
dot1sMlagReceiveBPDU(): Discarding the BPDU, Unable to put it on
Msg Queue
Error
Failed to put received BPDU into message queue, discard it.
dot1sMlagReceivePvstBPDU(): Discarding the BPDU, cannot get buffer from buff pool
Error
Failed to get buffer for received BPDU, discard it.
dot1sMlagReceivePvstBPDU(): Discarding the BPDU, since it is an invalid BPDU type
Error
Invalid BPDU type, discard it.
dot1sMlagReceivePvstBPDU(): Discarding the BPDU, Unable to put it on Msg Queue
272 December/2018
FUJITSU PSWITCH
Error
Failed to put received BPDU into message queue, discard it.
Message Collection
dot1sMlagReceiveSstpBPDU(): Discarding the BPDU, cannot get buffer from buff pool
Error
Failed to get buffer for received BPDU, discard it.
dot1sMlagReceiveSstpBPDU(): Discarding the BPDU, since it is an invalid BPDU type
Error
Invalid BPDU type, discard it.
dot1sMlagReceiveSstpBPDU(): Discarding the BPDU, Unable to put it on Msg Queue
Error
Failed to put received BPDU into message queue, discard it.
dot1sPvstStpBpduTx(): could not find bridge params.
Error
Failed to find bridge parameters.
dot1sPvstStpBpduTx(): could not get buffers.
Error
Failed to get buffer.
dot1sPvstStpTcnTransmit(): could not get buffers.
Error
Failed to get buffer.
dot1sStateSetCallback misordered set expected handle
<MemoryAddress> interface <InterfaceNumber> received handle
<MemoryAddress> interface <InterfaceNumber>
December/2018 273
Message Collection
Error
FUJITSU PSWITCH
dot1sStateSetCallback is misordered.
<MemoryAddress> Memory address
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
dtlDot1sStateSet failed interface <InterfaceNumber>, instance ID
<InstanceID> state <StpState>
Error
dtlDot1sStateSet failed on interface.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<InstanceID>
<StpState>
Instance ID blocking, forwarding, learning, disabled, manual,...
Error accessing DOT1S config data for interface <InterfaceNumber> portIndex <InterfaceNumber> in <FunctionName>.
Error
Failed to access DOT1S config data.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<FunctionName> Log is created by this function.
Error allocating buffer and hence failed to forward BPDU received on MLAG interface <InterfaceNumber> to Primary.
Error
Failed to allocate buffer to forward BPDU.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Error allocating buffer and hence failed to forward PVST BPDU received on MLAG interface <InterfaceNumber> to Primary.
274 December/2018
FUJITSU PSWITCH
Error
Message Collection
Failed to allocate buffer to forward PVST BPDU.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Error allocating buffer and hence failed to forward SSTP BPDU received on MLAG interface <InterfaceNumber> to Primary.
Error
Failed to allocate buffer to forward SSTP BPDU.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Error allocating buffer and hence failed to send BPDU to Secondary device for transmission.
Error
Failed to allocate buffer to send BPDU.
Error in creating interface <InterfaceNumber>
Error
Failed to create interface.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Error: Cannot find check pointed data for port <InterfaceNumber>
Error
Failed to find check pointed data for port.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
ERROR: Failed to transmit BPDU out of interface <InterfaceNumber>
December/2018 275
Message Collection
Error
FUJITSU PSWITCH
Failed to transmit BPDU on interface.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Error: instIndex ALL value not valid for
PORT(<InterfaceNumber>)inst TLV
Error
Invalid instance index is received.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Error: vlanInstIndex(<InstanceID>) not the value expected. Msgs received out of order
Error
Messages received are out of order.
<InstanceID> Instance ID
Event VLAN_DELETE_PENDING_NOTIFY cannot be handled for out of range VLAN <VlanID>
Error
Vlan ID is unexpected.
<VlanID> VLAN ID
Failed to add VLAN <VlanID> to instance <InstanceID>
Error
Failed to add vlan to instance.
<VlanID> VLAN ID
<InstanceID> Instance ID
Failed to add VLANs to MST instance <InstanceID>
Error
Failed to add vlans to MST instance.
<InstanceID> Instance ID
Failed to clear BPDU Guard for interface <InterfaceNumber>
276 December/2018
FUJITSU PSWITCH
Error
Message Collection
Failed to clear BPDU Guard for interface.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to create MST instance <InstanceID>
Error
Failed to create MST instance.
<InstanceID> Instance ID
Failed to create PVST instance. Spanning-tree is not operational on VLAN <VlanID>.
Error
Failed to create PVST instance.
<VlanID> VLAN ID
Failed to delete PVST instance for VLAN <VlanID>
Error
Failed to delete PVST instance for vlan.
<VlanID> VLAN ID
Failed to disassociate VLAN and MSTP instance as the Vlan
(<VlanID>) is not part of instance (<InstanceID>).
Error
Failed to disassociate vlan from MSTP instance.
<VlanID> VLAN ID
<InstanceID> Instance ID
Failed to find PVST information for Vlan[<InstanceID>]
Intf[<InterfaceNumber>]
December/2018 277
Message Collection
Error
FUJITSU PSWITCH
Failed to obtain PVST information on interface for vlan.
<InstanceID> Instance ID
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to find PVST instance for index <VlanID> for interface
<InterfaceNumber>
Error
Failed to find PVST instance for interface.
<VlanID> VLAN ID
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to find PVST instance for vlan <VlanID> for interface
<InterfaceNumber>
Error
Failed to find PVST instance for vlan on interface.
<VlanID> VLAN ID
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to find PVST instance index for vlan <VlanID>
Error
Failed to find PVST instance index for vlan.
<VlanID> VLAN ID
Failed to forward BPDU recieved on MLAG interface
<InterfaceNumber> to Primary
Error
Failed to forward BPDU.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to forward dot1s Mlag transport BPDU recieved on MLAG interface <InterfaceNumber> to secondary
278 December/2018
FUJITSU PSWITCH
Error
Message Collection
Failed to forward dot1s Mlag transport BPDU recieved on MLAG interface.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to forward PVST BPDU recieved on MLAG interface
<InterfaceNumber> to Primary
Error
Failed to forward PVST BPDU.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to forward SSTP BPDU recieved on MLAG interface
<InterfaceNumber> to Primary
Error
Failed to forward SSTP BPDU.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to get admin state for interface <InterfaceNumber>
Error
Failed to get admin state for interface.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to get dot1s instance number for index:<InstanceID>.
Error
Failed to get instance number.
<InstanceID> Instance ID
Failed to get LAG interface index for the MLAG id <ID>.
Error
Failed to get LAG interface index.
<ID> ID
Failed to get switch port mode for interface <InterfaceNumber>
December/2018 279
Message Collection
Error
FUJITSU PSWITCH
Failed to get switch port mode for interface.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to get the reconciled data for interface <InterfaceNumber> to update interface state.
Error
Failed to obtain reconciled data for interface.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to make MST configuration name <MstConfigurationName> operationally active
Error
Failed to set MST configuration name.
<MstConfigurationName> The MST configuration name for MSTP configuration.
Failed to make MST revision number <MstRevisionNumber> operationally active
Error
Failed to set MST revision number.
<MstRevisionNumber> The MST revision number for MSTP configuration.
Failed to notify <InstanceID> instance creation to the system
Error
Failed to notify instance creation to the system.
<InstanceID> Instance ID
Failed to populate PVST port defaults for index <Index> for interface <InterfaceNumber>
280 December/2018
FUJITSU PSWITCH
Error
Message Collection
Failed to populate PVST port defaults for interface.
<Index> Index
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to populate PVST port defaults for vlan <VlanID> for interface <InterfaceNumber>
Error
Failed to populate PVST port defaults for vlan on interface.
<VlanID> VLAN ID
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to remove VLAN <VlanID> from instance <InstanceID>
Error
Failed to remove vlan from instance.
<VlanID> VLAN ID
<InstanceID> Instance ID
Failed to reset the dot1s cost of interface <InterfaceNumber>
Error
Failed to reset the path cost of interface.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to send BPDU to Secondary device for transmission.
Error
Failed to send BPDU.
Failed to send control message to peer to set STP state <StpState> on interface <InterfaceNumber> for instance/vlanId <InstanceID>
December/2018 281
Message Collection
Error
FUJITSU PSWITCH
Failed to send control message to peer.
<StpState> blocking, forwarding, learning, disabled, manual,...
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<InstanceID> Instance ID
Failed to set BPDU Filter value for interface <InterfaceNumber>
Error
Failed to set BPDU filter value for interface.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to set BPDU Flood value <SetValue> for interface
<InterfaceNumber>
Error
Failed to set BPDU flood value for interface.
<SetValue> Set Value
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to set BPDU Guard for interface <InterfaceNumber>
Error
Failed to set BPDU Guard for interface.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to set BPDU Guard value <SetValue> for <InterfaceNumber>
Error
Failed to set BPDU Guard value.
<SetValue> Set Value
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to set port path cost <SetValue> for MST <InstanceID> for interface <InterfaceNumber>.
282 December/2018
FUJITSU PSWITCH
Error
Message Collection
Failed to set port path cost on interface for MST instance.
<SetValue> Set Value
<InstanceID> Instance ID
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to set port priority <SetValue> for MST <InstanceID> for interface <InterfaceNumber>.
Error
Failed to set port priority on interface for MST instance.
<SetValue> Set Value
<InstanceID> Instance ID
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to set priority for CST instance <InstanceID>
Error
Failed to set priority for CST instance.
<InstanceID> Instance ID
Failed to set priority for MST instance <InstanceID>
Error
Failed to set priority for MST instance.
<InstanceID> Instance ID
Failed to set VLAN BPDU Flood mode <SetValue>
Error
Failed to set VLAN BPDU Flood mode.
<SetValue> Set Value
Failed to transmit VPC ack to peer for interface <InterfaceNumber>, vlan Index <InstanceID> state = <StpState> txId = <ID>
December/2018 283
Message Collection
Error
FUJITSU PSWITCH
Failed to transmit VPC ack to peer.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<InstanceID>
<StpState>
<ID>
0/1, 0/0/1
Instance ID blocking, forwarding, learning, disabled, manual,...
ID
Failed to transmit VPC ack to peer for txId = <ID>
Error
Failed to transmit VPC ack to peer.
<ID> ID
Function call to check point sub system for data to transmit failed with error (<ErrorCode>)
Error
Failed to start checkpoint service.
<ErrorCode> Error code
Intf <InterfaceNumber> cannot get recon data
Error
Failed to obtain reconciled data for interface.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Intf <InterfaceNumber> spanning state <StpState> set failed with error code <ErrorCode>
Error
Failed to set spanning state for interface.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<StpState>
<ErrorCode> blocking, forwarding, learning, disabled, manual,...
Error code
Invalid Instance index <InstanceID> received at index <Index>.
284 December/2018
FUJITSU PSWITCH
Error
Invalid instance index is received.
<InstanceID> Instance ID
<Index> Index
Message Collection
Invalid Tlv <TypeValue> received in the checkpointed data at
<LengthValue>
Error
Invalid TLV is received in the checkpointed data.
<TypeValue> Type Value
<LengthValue> ipv6 prefix length
Invalid Tlv (<TypeValue>) received in the checkpointed data at
<LengthValue>
Error
Invalid TLV is received in the checkpointed data.
<TypeValue> Type Value
<LengthValue> ipv6 prefix length
Limit of <MaxValue> VLAN PVST instances exceeded. Spanning tree is not operational on VLAN <VlanID>.
Error
Limit of PVST instances exceeded.
<MaxValue> Maximum value
<VlanID> VLAN ID
Mlag check point data is not present
Error
Mlag check point data is not present.
Native VLAN <VlanID> on <InterfaceNumber> does not match peer native VLAN <VlanID>.
December/2018 285
Message Collection
Error
FUJITSU PSWITCH
Native vlan on interrface does not match peer native vlan.
<VlanID> VLAN ID
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
nimIntfQuery failed for interface <InterfaceNumber>
Error
Failed to obtain interface data.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
nimIntfQuery failed for intf <InterfaceNumber>
Error
Failed to obtain interface data.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Platform limit of <MaxValue> PVST instances reached.
Error
Reach platform limit of PVST instances.
<MaxValue> Maximum value
Platform limit of <MaxValue> PVST instances reached. No further instances are created.
Error
Platform limit of PVST instances reached. No further instances are created.
<MaxValue> Maximum value
Port <InterfaceNumber> Not reconciled : reconciliation state
<State> <WaitingOrNot> on PDU
286 December/2018
FUJITSU PSWITCH
Error
Message Collection
Port is not reconciled.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<State>
<WaitingOrNot>
0/1, 0/0/1
State
"waiting" or "not waiting"
PVID consistency restored: unblocking <InterfaceNumber> on VLAN
<VlanID>.
Error
Unblock interface on vlan.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<VlanID>
0/1, 0/0/1
VLAN ID
PVID inconsistency: Blocking <InterfaceNumber> on VLAN <VlanID>.
Error
Block interface on vlan.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<VlanID>
0/1, 0/0/1
VLAN ID
Received BPDU with inconsistent peer VLAN <VlanID> on
<InterfaceNumber> VLAN <VlanID>.
Error
Received BPDU with inconsistent peer vlan.
<VlanID> VLAN ID
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Received check point data from mlag is NULL.
Error
Failed to obtain check point data.
Received check point data message header version (<Version>) is not supported
December/2018 287
Message Collection
Error
FUJITSU PSWITCH
Received check point data message header version is not supported.
<Version> Version
Reconciliation event received for an invalid dot1s instance index
<InstanceID> on the interface <InterfaceNumber>.
Error
Reconciliation event received for an invalid dot1s instance index on the interface.
<InstanceID> Instance ID
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Unable to add <VlanID> vlan to <InstanceID> instance
Error
Failed to add vlan to instance.
<VlanID> VLAN ID
<InstanceID> Instance ID
Unable to allocate buffers for sending packet for dot1s- mlag
Error
Failed to allocate buffer for sending packet.
Unable to set the dot1s port state to <StpState> for instance
<InstanceID> on peer interface <InterfaceNumber>. Failure occured due to the reason <ErrorCode>. Attempting to diagnostically disable the port on the peer
Error
Failed to set DOT1S state on peer interface for instance.
<StpState> blocking, forwarding, learning, disabled, manual,...
<InstanceID> Instance ID
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<ErrorCode>
0/1, 0/0/1
Error code
Unexpectedly received Begin TLV for instance index(<InstanceID>).
Messages received are out of order.
288 December/2018
FUJITSU PSWITCH
Error
Messages received are out of order.
<InstanceID> Instance ID
Message Collection
Unexpectedly received Begin TLV for VLAN instance index
(<InstanceID>). Messages received are out of order
Error
Messages received are out of order.
<InstanceID> Instance ID
Unexpectedly received End TLV for instance index(<InstanceID>).
Messages received are out of order.
Error
Messages received are out of order.
<InstanceID> Instance ID
Unexpectedly received End TLV for VLAN instance index(<InstanceID>). Messages received are out of order
Error
Messages received are out of order.
<InstanceID> Instance ID
vlan: <VlanID> is not part of any other instance
Error
Vlan is not assigned to instance.
<VlanID> VLAN ID
<FunctionName>: Error allocating buffers for dot1s VPC data.
Informational
Failed to allocate buffers.
<FunctionName> Log is created by this function.
<FunctionName>: Error allocating buffers for VPC Transport data.
December/2018 289
Message Collection
Informational
Failed to allocate buffers.
<FunctionName> Log is created by this function.
FUJITSU PSWITCH
<FunctionName>: Error allocating large buffers
Informational
Failed to allocate buffers.
<FunctionName> Log is created by this function.
<FunctionName>: Error creating dot1sStateSetSema
Informational
Failed to create semaphore.
<FunctionName> Log is created by this function.
<FunctionName>: osapiMessageSend failed
Informational
Failed to send messgae.
<FunctionName> Log is created by this function.
<InterfaceNumber> in VLAN <VlanID> transitioned to forwarding state (Uplinkfast)
Informational
Interface in vlan transitione to forwarding state.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<VlanID> VLAN ID
Acc. IEEE 802.1Q-REV 2005 updating hello time is disallowed
Informational
Update hello time is disallowed according to IEEE 802.1Q-REV 2005.
Cannot find inst number for Index <InstanceID>
290 December/2018
FUJITSU PSWITCH
Informational
Cannot find instance number.
<InstanceID> Instance ID
Message Collection
Cannot get first valid NIM Interface number
Informational
Cannot get first valid NIM Interface number.
Cannot set state <StpState> on interface <InterfaceNumber> for instance ID <InstanceID> (txId = <ID> interface is VPC interface
= <TrueOrFalse>)
Informational
Cannot set state on interface for interface.
<StpState> blocking, forwarding, learning, disabled, manual,...
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<InstanceID>
<ID>
<TrueOrFalse>
0/1, 0/0/1
Instance ID
ID
String; "True", "False"
Cannot set state(<StpState>) for port (<InterfaceNumber>) in instance(<InstanceID>) to anything other than discarding for loop inconsistent
Informational
Cannot set state for port in instance.
<StpState> blocking, forwarding, learning, disabled, manual,...
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<InstanceID> Instance ID
Cannot set state(<StpState>) for port (<InterfaceNumber>) in vlanid(<VlanID>) to anything other than discarding for loop inconsistent
December/2018 291
Message Collection
Informational
FUJITSU PSWITCH
Cannot set state for port in vlan.
<StpState> blocking, forwarding, learning, disabled, manual,...
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<VlanID> VLAN ID
Cannot set the DOT1S state <StpState> on interface
<InterfaceNumber> for vlan id <InstanceID>(index <Index>)
Informational
Cannot set the DOT1S state on interface for vlan.
<StpState> blocking, forwarding, learning, disabled, manual,...
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<InstanceID>
<Index>
Instance ID
Index
CIST updtInfo already true, discarding msg on interface
<InterfaceNumber>
Informational
CIST updtInfo is TRUE, discarding message on interface.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
dot1s Event out of range <EventID>
Informational
Receive unexpected event.
<EventID> Event ID
dot1s helper init: timer task creation error.
Informational
Failed to create task.
dot1s mlag helper init: msgQueue creation error.
292 December/2018
FUJITSU PSWITCH
Informational
Failed to create message queue.
Message Collection
DOT1S: Cannot start dot1s events trace
Informational
Failed to start DOT1S events trace.
DOT1S: Failed to put comamnd : <Command> configurator message in queue.
Informational
Failed to send messgae.
<Command> Command
DOT1S: unable to create the trace buffer
Informational
Failed to create the trace buffer.
Dot1s: unable to delete the event trace buffer
Informational
Failed to delete the event trace buffer.
dot1sBpduReceive is deregistered
Informational
dot1sBpduReceive is deregistered.
dot1sHelperInit: msgQueue creation error.
Informational
Failed to create message queue.
dot1sHelperInit: timer task creation error.
December/2018 293
Message Collection
Informational
Failed to create task.
FUJITSU PSWITCH
dot1sIhSetPortState: Invalid MSTP state!
Informational
Invalid MSTP state.
dot1sMlagReceiveSstpBPDU(): Unable to retrieve PVID checking TLV
VLAN Id
Informational
Failed to obtain PVID value.
dot1sMstpTx(): CIST Role Disabled.Port(<InterfaceNumber>)
Inst(<InstanceID>)
Informational
CIST port role is Disabled on port in instance.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<InstanceID> Instance ID
dot1sPvstSstpBpduTx(): CIST Role
Disabled.Port(<InterfaceNumber>) Inst(<InstanceID>)
Informational
CIST port role is Disabled on port in instance.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<InstanceID>
0/1, 0/0/1
Instance ID
dot1sPvstStateMachineRxBpdu(): Rcvd BPDU Discarded on unknown interface
Informational
Discard received BPDU on unknown interface.
dot1sPvstStateMachineRxBpdu(): Rcvd BPDU Discarded. The current conditions, like port is not enabled or we are currently not finished processing another BPDU on the same
294 December/2018
FUJITSU PSWITCH
Informational
Discard received BPDU.
Message Collection
dot1sPvstStpBpduTx(): CIST Role
Disabled.Port(<InterfaceNumber>) Inst(<InstanceID>)
Informational
CIST port role is Disabled on port in instance.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<InstanceID>
0/1, 0/0/1
Instance ID
dot1sRcvdMsgsSet(): updtInfo CIST is L7_TRUE, discarding Msg on port <InterfaceNumber>
Informational
updtInfo CIST is TRUE, discarding message on port.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
dot1sRcvdMsgsSet(): updtInfo MSTI is L7_TRUE, discarding Msg on port <InterfaceNumber>
Informational
updtInfo MSTI is TRUE, discarding message on port.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
dot1sSave deregistered
Informational
dot1sSave() is deregistered.
dot1sStateMachineRxBpdu(): Rcvd BPDU Discarded on unknown interface
December/2018 295
Message Collection
Informational
Discard received BPDU on unknown interface.
FUJITSU PSWITCH
dot1sStateMachineRxBpdu(): Rcvd BPDU Discarded. The current conditions, like port is not enabled or we are currently not finished processing another BPDU on the same interface, does not allow us to process this BPDU.
Informational
Discard received BPDU.
dot1sUserInstanceCreate: Instance (<InstanceID>) already present
Informational
MST instance is already present.
<InstanceID> Instance ID
dot1sVlanChangeCallback is deregistered
Informational
dot1sVlanChangeCallback is deregistered.
Error on call to osapiFsWrite routine on config file <FileName>
Informational
Failed to write config file.
<FileName> Log is created by this file.
Error on call to sysapiCfgFileWrite routine on config file
<FileName>
Informational
Failed to write config file.
<FileName> Log is created by this file.
Error on call to sysapiSupportCfgFileWrite routine on config file
<FileName>
296 December/2018
FUJITSU PSWITCH
Informational
Error on writing config file.
<FileName> Log is created by this file.
Message Collection
Failed to create PVST instance for VLAN <VlanID>
Informational
Failed to create PVST instance.
<VlanID> VLAN ID
Failed to delete PVST instance <InstanceID>
Informational
Failed to delete PVST instance.
<InstanceID> Instance ID
Failed to delete PVST instance for VLAN <VlanID>
Informational
Failed to delete PVST instance.
<VlanID> VLAN ID
Failed to get instance index for VLAN Id : <VlanID>
Informational
Failed to get instance index for specific vlan.
<VlanID> VLAN ID
Failed to remove VLAN <VlanID> from instance <InstanceID>
Informational
Failed to remove vlan from instance.
<VlanID> VLAN ID
<InstanceID> Instance ID
Failed to reset BPDU filter value for interface <InterfaceNumber>
December/2018 297
Message Collection
Informational
FUJITSU PSWITCH
Failed to reset BPDU filter value for interface.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to retrieve intIfNum for configId.
Informational
Failed to retrieve interface number for configId.
Failed to set BPDU filter value <SetValue> for interface
<InterfaceNumber>
Informational
Failed to set BPDU filter for interface.
<SetValue> Set Value
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to set BPDU Filter value for interface <InterfaceNumber>
Informational
Failed to set BPDU filter value for interface.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to set BPDU Flood value <SetValue> for interface
<InterfaceNumber>
Informational
Failed to set BPDU flood value for interface.
<SetValue> Set Value
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Instance(<InstanceID>) not found, message expected during instance deletion
298 December/2018
FUJITSU PSWITCH
Informational
Failed to find instance.
<InstanceID> Instance ID
Message Collection
Invalid BPDU received on port (<InterfaceNumber>)
Informational
Invalid BPDU received on port.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Invalid interface number
Informational
Invalid interface number.
Mlag port common change mask has non zero members
Informational
Mlag port common change mask has non zero members.
Mlag port instance change mask has non zero members for inst
<InstanceID>
Informational
Mlag port instance change mask has non zero members for instance.
<InstanceID> Instance ID
PVST:dot1s Event out of range <EventID>
Informational
Receive unexpected event.
<EventID> Event ID
Rate limit of <MaxValue> for <TimeValue> consecutive seconds has been exceeded on port <InterfaceNumber>
December/2018 299
Message Collection
Informational
FUJITSU PSWITCH
Rate of receiving BPDUs is over rate limit.
<MaxValue> Maximum value
<TimeValue> Time Value
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Received a bpdu receive callback while outside the EXECUTE state
Informational
Received a bpdu receive callback while DOT1S is not ready.
Recieved a vlan callback in incorrect state <State> vlan <VlanID> event <EventID> interface <InterfaceNumber>
Informational
Received a vlan callback while DOT1S is not ready.
<State> State
<VlanID> VLAN ID
<EventID> Event ID
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
SpanningTree-LoopGuard: LoopGuard blocking port:
<InterfaceNumber> on MST instance: <InstanceID>
Informational
LoopGuard blocking port on MST instance.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<InstanceID>
0/1, 0/0/1
Instance ID
SpanningTree-LoopGuard: LoopGuard blocking port:
<InterfaceNumber> on VLAN instance: <InstanceID>
300 December/2018
FUJITSU PSWITCH
Informational
Message Collection
LoopGuard blocking port on vlan instance.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<InstanceID>
0/1, 0/0/1
Instance ID
SpanningTree-LoopGuard: LoopGuard Disabled: unblocking port
<InterfaceNumber> on MST instance <InstanceID>
Informational
LoopGuard Disabled: unblocking port on MST instance.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<InstanceID> Instance ID
SpanningTree-LoopGuard: LoopGuard Disabled: unblocking port
<InterfaceNumber> on VLAN instance <InstanceID>
Informational
LoopGuard Disabled: unblocking port on vlan instance.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<InstanceID>
0/1, 0/0/1
Instance ID
State Synced from Primary. Set Admin State to D_Disabled on interface <InterfaceNumber> for vlan index <InstanceID>
Informational
Set Admin State to D_Disabled on interface for vlan.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<InstanceID> Instance ID
State Synced from Primary. Set state to <StpState> on interface
<InterfaceNumber> for instance <InstanceID>
December/2018 301
Message Collection
Informational
FUJITSU PSWITCH
Set state on interface for interface.
<StpState> blocking, forwarding, learning, disabled, manual,...
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<InstanceID> Instance ID
State Synced from Primary. Set state to <StpState> on interface
<InterfaceNumber> for vlan id <InstanceID>(index <Index>)
Informational
Set state on interface for vlan.
<StpState> blocking, forwarding, learning, disabled, manual,...
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<InstanceID>
<Index>
Instance ID
Index
Tech Support Registration failed for DOT1S related commands
Informational
Failed to register Tech Support for DOT1S.
Unable to delete MSTP Instance <InstanceID> in the hardware
Informational
Failed to delete MSTP instance.
<InstanceID> Instance ID
Unable to initialize dot1s_helper_task()
Informational
Failed to initialize task.
Unable to initialize dot1s_mlag timer_task()
Informational
Failed to initialize task.
Unable to initialize dot1s_mlag_transport_task()
302 December/2018
FUJITSU PSWITCH
Informational
Failed to initialize task.
Message Collection
Unable to initialize dot1s_transport_task()
Informational
Failed to initialize task.
Unable to register for dot1s state callback with DTL!
Informational
Failed to register for dot1s state callback.
Unable to register for NIM Interface change callback!
Informational
Failed to register for NIM Interface change callback.
Unable to register for pdu receive callback with Sysnet!
Informational
Failed to register for pdu receive callback.
Unable to register for VLAN change callback!
Informational
Failed to register for vlan change callback.
Unknown instance <InstanceID>
Informational
Unknown instance.
<InstanceID> Instance ID
dot1sBpduReceive(): Invalid Forward Delay
Notice
Invalid Forward Delay.
dot1sBpduReceive(): Invalid Hello Time
December/2018 303
Message Collection
Notice
Invalid Hello Time.
dot1sBpduReceive(): Invalid Max Age
Notice
Invalid Max Age.
dot1sBpduReceive(): Invalid Port Id
Notice
Invalid Port Id.
FUJITSU PSWITCH
dot1sBpduReceive(): Msg Age greater than Max Age
Notice
Message Age is greater than Max Age.
Interface <InterfaceNumber> is D-Disabled due to BPDU Guard.
Notice
Interface is D-Disabled due to BPDU Guard.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Interface <InterfaceNumber> is restored from D-Disabled State.
Notice
Interface is restored from D-Disabled State.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Internal processing limit exceeded. Spanning-tree is not operational on VLAN <VlanID> in interface <InterfaceNumber>.
Moving to forwarding state
304 December/2018
FUJITSU PSWITCH
Notice
Message Collection
Platform limit of PVST instances is reached. Spanning-tree is not operational on this vlan in interface.
<VlanID> VLAN ID
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Received BPDU on an edge port(<InterfaceNumber>), setting the port to discarding
Notice
Received BPDU on an edge port, set the port to discarding.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Spanning-tree is not operational on VLAN <VlanID> in interface
<InterfaceNumber>. Moving to forwarding state
Notice
Spanning-tree is not operational on vlan in interface.
<VlanID> VLAN ID
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Unable to remove <VlanID> vlan to <InstanceID> instance
Notice
Failed to remove vlan from instance.
<VlanID> VLAN ID
<InstanceID> Instance ID
Attempt to update hello time which is disallowed per IEEE
802.1Q-REV 2005
Warning
Attempt to update hello time which is disallowed per IEEE 802.1Q-REV 2005.
Cannot get first valid NIM Interface number
December/2018 305
Message Collection
Warning
Cannot get first valid NIM Interface number.
FUJITSU PSWITCH
Cannot get forward delay time of root bridge for out of range VLAN
<VlanID> Check spanning-tree VLAN associations.
Warning
Invalid vlan id is used.
<VlanID> VLAN ID
Cannot get max age time of root bridge for VLAN <VlanID> Check spanning-tree VLAN associations.
Warning
Cannot get max age time of root bridge for vlan.
<VlanID> VLAN ID
Cannot get PVST cost for out of range VLAN <VlanID>. Check spanning-tree VLAN associations.
Warning
Invalid vlan id is used.
<VlanID> VLAN ID
Cannot get PVST forward delay time for out of range VLAN <VlanID>.
Warning
Invalid vlan id is used.
<VlanID> VLAN ID
Cannot get PVST hello time for out of range VLAN <VlanID>.
Warning
Invalid vlan id is used.
<VlanID> VLAN ID
Cannot get PVST hello, age and forward delay times for out of range
VLAN <VlanID>. Check spanning-tree VLAN associations.
306 December/2018
FUJITSU PSWITCH
Warning
Invalid vlan id is used.
<VlanID> VLAN ID
Message Collection
Cannot get PVST max age time for out of range VLAN <VlanID>. Check spanning-tree VLAN associations.
Warning
Invalid vlan id is used.
<VlanID> VLAN ID
Cannot get PVST port role, stats and cost for out of range VLAN
<VlanID> on interface <InterfaceNumber>.
Warning
Invalid vlan id is used.
<VlanID> VLAN ID
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Cannot get PVST VLAN port priority for out of range VLAN <VlanID> on interface <InterfaceNumber>.
Warning
Invalid vlan id is used.
<VlanID> VLAN ID
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Cannot get PVST VLAN port priority for VLAN <VlanID>
Warning
Cannot get PVST VLAN port priority for VLAN.
<VlanID> VLAN ID
Cannot get PVST VLAN port priority for VLAN <VlanID> on
<InterfaceNumber>
December/2018 307
Message Collection
Warning
FUJITSU PSWITCH
Cannot get PVST VLAN port priority for vlan.
<VlanID> VLAN ID
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Cannot get PVST VLAN port priority for VLAN <VlanID> on interface
<InterfaceNumber>.
Warning
Cannot get PVST VLAN port priority for VLAN on interface.
<VlanID> VLAN ID
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Cannot get PVST VLAN port priority for VLAN <VlanID>, invalid parameter for <InterfaceNumber>
Warning
Invalid parameter id is used.
<VlanID> VLAN ID
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Cannot get vlan priority for VLAN Id <VlanID>
Warning
Cannot get vlan priority for vlan.
<VlanID> VLAN ID
Cannot set PVST forward delay time for out of range VLAN <VlanID>.
Warning
Invalid vlan id is used.
<VlanID> VLAN ID
Cannot set PVST max age time for out of range VLAN <VlanID>.
308 December/2018
FUJITSU PSWITCH
Warning
Invalid vlan id is used.
<VlanID> VLAN ID
Message Collection
Diagnostically disabling interface <InterfaceNumber>
Warning
Diagnostically disabling interface.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Diagnostically disabling interface <InterfaceNumber> as circular buffer is full for spanning-tree state set callbacks
Warning
Diagnostically disabling interface as circular buffer is full for spanning-tree state set callbacks.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Diagnostically disabling interface <InterfaceNumber> as message queue is full
Warning
Diagnostically disabling interface as message queue is full.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Diagnostically disabling interface <InterfaceNumber> as rate limit of <MaxValue> for <TimeValue> consecutive seconds has been exceeded
Warning
Diagnostically disabling interface as rate of receiving BPDUs is over rate limit.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<MaxValue>
<TimeValue>
0/1, 0/0/1
Maximum value
Time Value
Diagnostically disabling interface <InterfaceNumber> as spanning-tree port state callbacks are received out of order
December/2018 309
Message Collection
Warning
FUJITSU PSWITCH
Diagnostically disabling interface as spanning-tree port state callbacks are received out of order.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Diagnostically disabling interface <InterfaceNumber> as spanning-tree port state in hardware is not set properly
Warning
Diagnostically disabling interface as spanning-tree port state in hardware is not set properly.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Diagnostically disabling interface <InterfaceNumber> as spanning-tree state set timer has expired
Warning
Diagnostically disabling interface as spanning-tree state set timer has expired.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Disabling spanning-tree on VLAN 1 is not allowed.
Warning
Disabling spanning-tree on vlan 1 is not allowed.
Dot1s registrar ID <ComponentID>, <ComponentName> already registered
Warning
Registrar ID has already registered.
<ComponentID> Component ID
<ComponentName> Component name
Dot1s registrar ID <ComponentID>, <ComponentName> greater than
Last Component ID
310 December/2018
FUJITSU PSWITCH
Warning
Invalid registrar ID.
<ComponentID> Component ID
<ComponentName> Component name
Message Collection
dot1sHelperTimerCallback: Failed to get unit number
Warning
Failed to get unit number.
dot1sHelperTimerCallback: Failed to get unit status
Warning
Failed to get unit status.
dot1sInstStateQueryCallback is deregistered
Warning
dot1sInstStateQueryCallback is deregistered.
Invalid PVST forward delay time <SetValue> ignored for VLAN
<VlanID>. Valid range <MinValue>-<MaxValue>.
Warning
Invalid PVST forward delay time is used.
<SetValue> Set Value
<VlanID> VLAN ID
<MinValue>
<MaxValue>
Minimum value
Maximum value
Invalid PVST hello time <SetValue> ignored for VLAN <VlanID>.
Valid range <MinValue>-<MaxValue>
Warning
Invalid PVST hello time is used.
<SetValue> Set Value
<VlanID> VLAN ID
<MinValue>
<MaxValue>
Minimum value
Maximum value
Invalid PVST max age time <SetValue> ignored for VLAN <VlanID>.
December/2018 311
Message Collection
Warning
Invalid PVST max age time is used.
<SetValue> Set Value
<VlanID> VLAN ID
FUJITSU PSWITCH
Invalid PVST root path cost <SetValue> ignored. Range is
<MinValue>-<MaxValue>.
Warning
Invalid PVST path cost is used.
<SetValue> Set Value
<MinValue>
<MaxValue>
Minimum value
Maximum value
Loop Guard cannot be enabled on interface <InterfaceNumber> with enabled Root Guard
Warning
Loop Guard cannot be enabled on interface with enabled Root Guard.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Mismatch between checkpointed data and config for port
<InterfaceNumber>.
Warning
Mismatch between checkpointed data and port configuration.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Operation not performed for out of range backbone fast counter id
<Index>.
Warning
Invalid counter id is used.
<Index> Index
Operation not performed for out of range priority <SetValue> on interface <InterfaceNumber>.
312 December/2018
FUJITSU PSWITCH
Warning
Message Collection
Invalid PVST port priority is used.
<SetValue> Set Value
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Operation not performed for out of range uplink fast counter id
<Index>.
Warning
Invalid counter id is used.
<Index> Index
Operation not performed for out of range VLAN <VlanID> on interface
<InterfaceNumber>. Check spanning-tree VLAN associations.
Warning
Invalid vlan id is used.
<VlanID> VLAN ID
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Operation not performed on out of range VLAN <VlanID>. Check spanning-tree and VLAN associations.
Warning
Invalid vlan id is used.
<VlanID> VLAN ID
PVST hello time operation not performed for out of range VLAN
<VlanID>. Check spanning-tree VLAN associations.
Warning
Invalid vlan id is used.
<VlanID> VLAN ID
PVST mode operation not performed for invalid mode. Use spanning-tree mode pvst or spanning-tree mode rapid-pvst.
December/2018 313
Message Collection
Warning
Invalid PVST mode is used.
FUJITSU PSWITCH
PVST root operation not performed for out of range VLAN <VlanID>.
Check spanning-tree and VLAN associations.
Warning
Invalid vlan id is used.
<VlanID> VLAN ID
PVST root path cost cannot be set for out of range VLAN <VlanID>.
Check spanning-tree VLAN associations.
Warning
Invalid vlan id is used.
<VlanID> VLAN ID
PVST VLAN port priority operation not performed for out of range priority <SetValue> on VLAN <VlanID> on <InterfaceNumber>.
Warning
Invalid PVST VLAN port priority is used.
<SetValue> Set Value
<VlanID> VLAN ID
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
PVST VLAN port priority operation not performed for out of range
VLAN <VlanID> on <InterfaceNumber>.
Warning
Invalid vlan id is used.
<VlanID> VLAN ID
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Received a vlan callback while outside the EXECUTE state
314 December/2018
FUJITSU PSWITCH
Warning
Received a vlan callback while DOT1S is not ready.
Message Collection
Received callback when CB is empty interface <InterfaceNumber>.
Head <MemoryAddress> Tail <MemoryAddress>.
Warning
Received callback when circular buffer is empty.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<MemoryAddress>
0/1, 0/0/1
Memory address
Received out of range VLAN <VlanID>. Check spanning-tree and VLAN associations.
Warning
Invalid vlan id is used.
<VlanID> VLAN ID
Root Guard cannot be enabled on interface <InterfaceNumber> with enabled Loop Guard
Warning
Root Guard cannot be enabled on interface with enabled Loop Guard.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Set root operation not performed for invalid parameter. Use spanning-tree vlan root primary or spanning-tree vlan root secondary.
Warning
Invalid root mode.
Set root operation not performed on out of range VLAN <VlanID>.
Check spanning-tree and VLAN associations.
December/2018 315
Message Collection
Warning
Invalid vlan id is used.
<VlanID> VLAN ID
FUJITSU PSWITCH
Uplink fast rate operation not performed for invalid rate
<SetValue>. Valid range is 0-32000.
Warning
Invalid rate value is used.
<SetValue> Set Value
VLAN priority not set for VLAN <VlanID>. Check spanning-tree and
VLAN associations.
Warning
Cannot set vlan priority for vlan.
<VlanID> VLAN ID
2.1.18.
DOT1X
dot1xAuthHistoryLogDbInit() failed
Alert
Dot1X component authetication history log debug init fail.
Packet length[<PacketLength>] received from <MacAddress> is greater than the maximum permissible size[<SizeValue>]. This may cause inconsistent behavior Truncating the packet to maximum permissible size
Alert
Dot1X component packet length received from is greater than the maximum permissible size.
<PacketLength> Packet length
<MacAddress> MAC address
<SizeValue> An integer for a specific range or a limit value.
Duplicate client <MacAddress> detected on interface
<InterfaceNumber> (intIfNum <InterfaceNumber> logical port
<InterfaceNumber>) and removed.
316 December/2018
FUJITSU PSWITCH
Debug
Message Collection
Duplicate client is detected on interface.
<MacAddress> MAC address
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Error calling radius accounting start for interface
<InterfaceNumber>.
Debug
Dot1X component error calling radius accounting start for interface.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
History log entry delete invoked with entry index count as NULL!
Emergency
Dot1X component history log entry delete invoked with entry index count as
NULL.
History log entry delete invoked with interface entry index count as NULL!
Emergency
Dot1X history log entry delete invoked with interface entry index count as NULL.
Error in allocating data for DOT1X auth history log AVL tree.
Error
Dot1X component error in allocating data for DOT1X auth history log AVL tree.
Error in creating dynamic VLAN <VlanID>.
Error
Dot1X component error in creating dynamic VLAN.
<VlanID> VLAN ID
Error in creating interface <InterfaceNumber>.
December/2018 317
Message Collection
Error
FUJITSU PSWITCH
Dot1X component error in creating NIM interface.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to add MAC entry <MacAddress> in MAC database for interface
<InterfaceNumber> (intIfNum <InterfaceNumber> logical port
<InterfaceNumber>). Reason: Failed to send event dot1xAddMacInMacDB
Error
Dot1X component failed to add MAC entry in MAC database.
<MacAddress> MAC address
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to delete Dot1x Auth History Log Entry for
Iface:[<InterfaceNumber>] entryIndex:[<Index>]
Error
Failed to delete Dot1x Auth History Log Entry for Iface.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<Index> Index
Failed to delete DOT1X dynamic VLAN ID <VlanID>.
Error
Dot1X component failed to delete DOT1X dynamic VLAN ID.
<VlanID> VLAN ID
Failed to insert Dot1x log entry in the history log table on interface <InterfaceNumber>.
Error
Dot1X component failed to insert Dot1x log entry in the history log table.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Interface <InterfaceNumber> is not DOT1X configurable!
318 December/2018
FUJITSU PSWITCH
Error
Message Collection
Dot1X is not configurable in interface.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Invalid Dot1x Auth History Log Reason Code[<ErrorCode>]
Error
Displaying invalid Dot1x auth history log reason code.
<ErrorCode> Error code
provided User name length exceeds the supported length <MaxValue>
Error
provided User name length exceeds the Dot1X component supported length.
<MaxValue> Maximum value
Received an interface change callback while DOT1X is not ready to receive it.The startup phase is <NimStartupPhaseNumber>.
Error
DOt1X component received an interface change callback not ready.
<NimStartupPhaseNumber> NIM startup phase number
Unable to log entry into history table!
Error
Dot1X component unable to log entry into history table.
<FunctionName>: Failed to create supplicant mac address linked list
Informational
Dot1X component failed to create supplicant mac address entry.
<FunctionName> Log is created by this function.
<FunctionName>: Failed to destroy the supplicant mac address linked list
December/2018 319
Message Collection
Informational
FUJITSU PSWITCH
Dot1X component failed to destroy the supplicant mac address entry.
<FunctionName> Log is created by this function.
Could not set state to unauthorized for applying changes during
PVID change on interface <InterfaceNumber>.
Informational
Dot1X component fail to set state to unauthorized for applying changes.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
DOT1x: dot1xCtlPortPaeCapabilitiesInGlobalDisableSet function failed.
Informational
Dot1X component pae global capabilities diable set failed.
DOT1x: dot1xCtlPortPaeCapabilitiesSet function failed.
Informational
Dot1X component pae capabilities set failed.
DOT1X: Problem occured while placing the PDU in the dot1x Queue
Informational
Dot1X component PDU error when using queue.
dot1x: Unable to register for RADIUS response callback
Informational
Unable to register Dot1x component for RADIUS component response.
dot1x: Unable to register for Vlan callback
Informational
Unable to register Dot1x component for VLAN component response.
dot1x: Unable to register with NIM
320 December/2018
FUJITSU PSWITCH
Informational
Unable to register Dot1X component with NIM.
Message Collection
dot1xApmAuthenticatedAction: Could not set state to unauthorized for applying changes during reauthentication, logical port
<InterfaceNumber>
Informational
Dot1X component state machine could not set state to unauthorized.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
dot1xApmHeldAction suppRestarting: Failed sending terminate cause, logical interface <InterfaceNumber> with supplicant
Mac:<MacAddress>.
Informational
Dot1X component state machine failed sending terminate.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<MacAddress>
0/1, 0/0/1
MAC address
dot1xFrameTransmit: dtlPduTransmit failed
Informational
Dot1X component frame transmit failed.
dot1xIhProcessIntfChange L7_DISABLE: failed sending terminate cause, interface <InterfaceNumber> with supplicant
Mac:<MacAddress>.
Informational
Dot1X component accountigng stop fail when port event is disable.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<MacAddress> MAC address
dot1xIhProcessIntfChange L7_DOWN: failed sending terminate cause, interface <InterfaceNumber> with supplicant Mac:<MacAddress>.
December/2018 321
Message Collection
Informational
FUJITSU PSWITCH
Dot1X component accountigng stop fail when port event is down.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<MacAddress>
0/1, 0/0/1
MAC address
dot1xInit: msgQueue creation error.
Informational
Dot1X component queue creation error.
dot1xLocalAuthMd5ResponseValidate: couldn't allocate responseData
Informational
Dot1X component couldn't allocate response data.
dot1xRadiusAcceptProcess: failed sending terminate cause on interface with Supplicant Mac:<MacAddress>.
Informational
Dot1X component failed sending terminate.
<MacAddress> MAC address
dot1xSave: Error on call to sysapiCfgFileWrite for config file
<FileName>
Informational
Error on call to dot1x component write config file.
<FileName> Log is created by this file.
dot1xSpmMachine: could not set state to unauthorized, intf
<InterfaceNumber>
Informational
Dot1X component state machine could not set state to unauthorized.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
dot1xTxReqId: Out of System buffers
322 December/2018
FUJITSU PSWITCH
Informational
Message Collection
Dot1X component request frame transmit failed due to out of system buffers.
dot1xTxStart: Out of System buffers
Informational
Dot1X component START frame transmit failed due to out of system buffers.
Error accessing DOT1X config data for interface <InterfaceNumber> in DOT1X interface configuration.
Informational
Dot1X component error accessing DOT1X config data for interface.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Error calling radius accounting stop on interface
<InterfaceNumber>.
Informational
Dot1X component error calling radius accounting stop on interface.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Error creating dot1qCfgRWlock semaphore
Informational
Dot1X component error creating config read and write semaphore.
Error in adding the node to the DOT1X tree for interface
<InterfaceNumber>.
Informational
Dot1X component error in adding the node to the DOT1X tree for interface.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to create dot1x task.
December/2018 323
Message Collection
Informational
Failed to create Dot1X component task.
Failed to create dot1x timer task.
Informational
Failed to create Dot1X component timer task.
Failed to enabling dot1x tracing
Informational
Failed to enabling dot1x component tracing.
FUJITSU PSWITCH
Failed to initialize dot1x outcalls
Informational
Failed to initialize Dot1X component.
Failure in applying config data for interface <InterfaceNumber>.
Informational
Dot1X component failure in applying config data for interface.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failure in dot1xTxRxInit
Informational
Failure in dot1x component tx and Rx initial.
Interface <InterfaceNumber> in DOT1X interface configuration is not authorized.
Informational
Dot1X interface is not authorized.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Received an interface change callback while DOT1X not ready to receive it.
324 December/2018
FUJITSU PSWITCH
Informational
Message Collection
Dot1X component received an interface change callback is not ready.
Received an VLAN change callback while DOT1Q is not ready to receive it during unconfig state.
Informational
Dot1X VLAN assignment is not ready
Received disconnect message callback while DOT1X is not ready.
Informational
Dot1X component disconnect message callback not ready.
Unable to <SetValue> dot1x in driver.
Informational
Unable to set Dot1X in driver.
<SetValue> Set Value
Unable to <SetValue> EAPoL flood mode in driver.
Informational
Dot1X component unable to set EASPol flood mode in driver.
<SetValue> Set Value
Unable to create dot1x task semaphore.
Informational
Unable to create Dot1X component task semaphore
Unable to create dot1xTrace block
Informational
Unable to create dot1x component trace block.
Unable to initialize dot1x debug
December/2018 325
Message Collection
Informational
Unable to initialize dot1x debug.
Unable to initialize dot1x task.
Informational
Unable to initialize Dot1X component task.
Unable to initialize dot1x timer task.
Informational
Unable to initialize Dot1X component timer.
FUJITSU PSWITCH
Error in allocating memory for the DOT1X database. Possible causes are insufficient memory.
Notice
Dot1X component error in allocating memory for the DOT1X database.
<FunctionName>: Could not add supplicant mac address(<MacAddress>) logical Interface: <InterfaceNumber> .
Insufficient memory.
Notice
Dot1X component could not add supplicant mac address to logical interface because of insufficient memory.
<FunctionName> Log is created by this function.
<MacAddress> MAC address
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<FunctionName>: Error allocating buffers for supplicant mac address database. Could not allocate buffer pool for Mac address link list. Insufficient memory.
Notice
Dot1X component error allocating buffers for supplicant mac address database.
<FunctionName> Log is created by this function.
<FunctionName>: Error in removing the client details from the driver. Could not remove client details from the driver
326 December/2018
FUJITSU PSWITCH
Notice
Could not remove client details from the driver.
<FunctionName> Log is created by this function.
Message Collection
Can not add user <MacAddress> for interface - <InterfaceNumber>, as it reached maximum limit of <MaxValue> users.
Notice
Dot1X component can't add user for interface because it reached maximum limit.
<MacAddress> MAC address
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<MaxValue>
0/1, 0/0/1
Maximum value
Could not set state to authorized for applying changes during PVID change for interface <InterfaceNumber> on VLAN <VlanID>. Could not reset the port to authorized state after applying PVID change to the client details.
Notice
Dot1X component fail to set state to authorized for applying changes.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<VlanID> VLAN ID
Could not set state to unauthorized on interface <InterfaceNumber>.
DTL call failed setting authorization state of the port or client.
Notice
Dot1X component state machine could not set state to unauthorized on interface.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Dot1x authenticated successfully
Notice
Dot1X component authenticated successfully.
DOT1X history log table entry index <Index> reaches maximum data type limit.
December/2018 327
Message Collection
Notice
FUJITSU PSWITCH
DOT1X history log table entry index reaches maximum data type limit.
<Index> Index
DOT1X history log table exceeds maximum entries <MaxValue>.
Notice
DOT1X history log table exceeds maximum entries.
<MaxValue> Maximum value
DOT1X history log table exceeds maximum interface
<InterfaceNumber> entries <MaxValue>.
Notice
DOT1X history log table exceeds maximum interface entries.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<MaxValue> Maximum value
dot1xApiCnfgrCommand: Failed calling dot1xIssueCmd. 802.1X message queue is full
Notice
Dot1X message queue is full.
dot1xApmAuthenticatedAction: Could not set state to authorized, logical port <InterfaceNumber>. DTL call failed setting authorization state of the port or client (logical port).
Notice
Dot1X component state machine could not set state to authorized.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
dot1xApmForceAuthAction: Could not set state to authorized,interface <InterfaceNumber>. DTL call failed setting authorization state of the port or client (logical port).
328 December/2018
FUJITSU PSWITCH
Notice
Message Collection
Dot1X component state machine could not set state to authorized.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
dot1xApmForceUnauthAction: Could not set state to unauthorized, interface <InterfaceNumber>. DTL call failed setting authorization state of the port or client (logical port).
Notice
Dot1X component state machine could not set state to unauthorized.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
dot1xApmForceUnauthAction: Failed sending terminate cause, interface <InterfaceNumber> with Supplicant Mac:<MacAddress>.
Failed sending accounting stop to RADIUS server
Notice
Dot1X component state machine failed sending terminate.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<MacAddress>
0/1, 0/0/1
MAC address
dot1xApmHeldAction: Could not set state to unauthorized, logical interface <InterfaceNumber>. DTL call failed setting authorization state of the port or client (logical port).
Notice
Dot1X component state machine could not set state to unauthorized.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
dot1xBamRequestAction: Out of System buffers. 802.1X cannot process/transmit message due to lack of internal buffers
December/2018 329
Message Collection
Notice
FUJITSU PSWITCH
Dot1X component state machine cannot process/transmit message due to lack of internal buffers.
dot1xBamResponseAction: Failed getting auth method, logical interface <InterfaceNumber>. Could not determine the authentication method to be used . Probably because of a mis-configuration.
Notice
Dot1X component state machine Failed getting authentication method.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
dot1xRadiusChallengeProcess: EAP message not received from server.
RADIUS server did not send required EAP message
Notice
Dot1X component failed due to RADIUS server did not send required EAP message.
dot1xRadiusChallengeProcess: Out of system buffers. 802.1X cannot process/transmit message due to lack of internal buffers
Notice
Dot1X component cannot process/transmit message due to lack of internal buffers.
dot1xSendRespToServer: dot1xRadiusAccessRequestSend failed
Failed sending message to RADIUS server
Notice
Dot1X component failed sending message to RADIUS server.
dot1xTxCannedFail: Out of System buffers. 802.1X cannot process/transmit message due to lack of internal buffers
330 December/2018
FUJITSU PSWITCH
Notice
Message Collection
Dot1X component cannot process/transmit message due to lack of internal buffers.
dot1xTxMd5Challenge: Out of System buffers. 802.1X cannot process/transmit message due to lack of internal buffers
Notice
Dot1X component cannot process/transmit message due to lack of internal buffers.
dot1xTxReq: Out of System buffers. 802.1X cannot process/transmit message due to lack of internal buffers
Notice
Dot1X component cannot process/transmit message due to lack of internal buffers.
EAP message not received from server. RADIUS server did not send required EAP message.
Notice
Dot1X component fail because EAP message not received from server.
Error calling dot1xRadiusAccountingStart, lIntIfNum=<InterfaceNumber> Failed sending accounting start to
RADIUS server
Notice
Dot1X component state machine failed sending accounting start to RADIUS server.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Error in adding the client details to the driver. Could not add client (logical port) details to the hardware.
December/2018 331
Message Collection
Notice
Dot1X component failed to set interdface client to hardware.
FUJITSU PSWITCH
Error in allocating node for interface <InterfaceNumber>,as it reached maximum limit per port. Could not allocate memory for client as maximum number of clients allowed per port has been reached.
Notice
Dot1X component error in allocating node for interface.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Error in assigning VLAN <VlanID> to port/client.
Notice
Dot1X component VLAN assignment failure.
<VlanID> VLAN ID
Error in removing the client details from the driver. Could not remove client details from the driver
Notice
Dot1X component failed to delet interface client to hardware.
Failed sending terminate cause on interface <InterfaceNumber> with Supplicant Mac:<MacAddress>. Failed sending accounting stop to RADIUS server
Notice
Dot1X component failed calling radius accounting stop to RADIUS server.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<MacAddress> MAC address
Failed to allocate DOT1X history log node for entry index <Index> on interface <InterfaceNumber>, as it has reached the maximum limit!
332 December/2018
FUJITSU PSWITCH
Notice
Message Collection
Dot1X component failed to allocate DOT1X history log node for entry.
<Index> Index
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to authenticate due to invalid NAS Port.
Notice
Dot1X component failed to authenticate due to invalid NAS Port.
Failed to authenticate on interface <InterfaceNumber>. RADIUS request timed out.
Notice
Dot1X component authentication failed because of Radius request timed out.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to authenticate on interface <InterfaceNumber>. Received an invalid RADIUS status type.
Notice
Dot1X component failed to authenticate on interface because received an invalid
RADIUS status type.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to authenticate on logical interface <InterfaceNumber> due to radius comm failure.
Notice
Dot1X component authentication failed on logical interface with Radius.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to authenticate received invalid NAS port
December/2018 333
Message Collection
Notice
FUJITSU PSWITCH
Dot1X component failed to authenticate because received invalid NAS port.
Failed to create logical interfaces for interface
<InterfaceNumber>
Notice
Dot1X component failed to create logical interfaces for interface.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to find recently added entry to the DOT1X history log tree for interface <InterfaceNumber>.
Notice
Dot1X component failed to find recently added entry to the DOT1X history log tree for interface.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to process Local Auth Response - Invalid EAP Type.
<ErrorMessage>
Notice
Dot1X component failed to Process Local Auth Response, because of invalid eap type.
<ErrorMessage> Error message
Failed to process Local Auth Response - MD5 Validation Failure.
<ErrorMessage>
Notice
Dot1X component failed to Process Local Auth Response, because of MD5 validation.
<ErrorMessage> Error message
Failed to Process Local Auth Response, User does not have access.
<ErrorMessage>
334 December/2018
FUJITSU PSWITCH
Notice
Message Collection
Dot1X component failed to Process Local Auth Response, when user does not have access.
<ErrorMessage> Error message
Failed to Process Local Auth Response, User Not Found.
<ErrorMessage>
Notice
Dot1X component failed to Process Local Auth Response, when user not Found.
<ErrorMessage> Error message
Failed to send radius access request message.
Notice
Dot1X component failed to send radius access request message.
Interface <InterfaceNumber> moved from authenticated state as assigned VLAN ID <VlanID> is deleted. DOT1X assigned VLAN to the logical port (client) is deleted.
Notice
Dot1X assigned VLAN to the logical port (client) is deleted.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<VlanID> VLAN ID
Interface <InterfaceNumber> moved from authenticated state to guest VLAN state, as guest VLAN is not operational. So guest VLAN is deleted.
Notice
Dot1X component fial to set guest vlan.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Invalid VLAN <VlanID> received from radius server.
December/2018 335
Message Collection
Notice
Dot1X component received invalid VLAN from radius server.
<VlanID> VLAN ID
FUJITSU PSWITCH
Local Authentication failed on interface <InterfaceNumber>.
Authentication retry attempt <CountValue>
Notice
Dot1x failed on interface.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<CountValue> Count Value
Local Dot1x Authenticated Successfully.
Notice
Dot1x Authenticated Successfully.
Radius authenticated in unauthenticated VLAN on interface
<InterfaceNumber>.
Notice
Dot1X component authentication failed.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Radius Authentication Failed on physPort:[<InterfaceNumber>] lIntIfNum:[<InterfaceNumber>] Mac Address :[<MacAddress>].
Notice
Dot1X component authentication failed on physPort, or Mac address with Radius.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<MacAddress> MAC address
Radius Authentication Failed on physPort:[<InterfaceNumber>] lIntIfNum:[<InterfaceNumber>] Mac Address :[<MacAddress>].
<ErrorMessage>
336 December/2018
FUJITSU PSWITCH
Notice
Message Collection
Dot1X component authentication failed on physPort, or on Mac address with
Radius.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<MacAddress>
<ErrorMessage>
0/1, 0/0/1
MAC address
Error message
Failed to process Local Auth Response - Invalid EAP Type.
<ErrorMessage>
Notice
Dot1X component authentication failed on physPort, or on Mac address with
Radius.
<ErrorMessage> Error message
Reinitializing monitor mode authenticated interface
<InterfaceNumber>, as there is a change in port PVID <VlanID>.
Notice
Reinitializing monitor mode when there is a change in port PVID.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<VlanID>
0/1, 0/0/1
VLAN ID
VLAN assignment feature is not enabled. DOT1X server assigned
VLANID not applied!
Notice
Dot1X component VLAN assignment feature is not enabled.
2.1.19.
DOT1X_AUTH_SERV
Error creating dot1xAuthServUserDBRWLock semaphore
Critical
Error creating dot1x component semaphore.
Failed to write IDAS config to file <FileName>
December/2018 337
Message Collection
Debug
FUJITSU PSWITCH
Failed to write internal dot1x authentication server config to file.
<FileName> Log is created by this file.
2.1.20.
DOT3AD
Cannot Initialize DOT3AD MLAG
Alert
Initialization VPC failed
DOT3AD: failed to register for PDUs
Alert
Register LAG PDUs callback function failed
DOT3AD: Failed to register NV routines
Alert
Register notify callback function failed
DOT3AD: failed to register to NIM
Alert
Register interface change callback function failed
DOT3AD: failed to register with DOT3AD MLAG
Alert
Register LAG with VPC callback function failed
DOT3AD: failed to register with DOT3AD MLAG in phase3
Alert
Register LAG with VPC callback function failed in phase 3
dot3adPhaseOneInit: Error allocating buffers
338 December/2018
FUJITSU PSWITCH
Alert
LAG memory buffer allocate failed
Failed to create dot3ad mlag pdu task
Alert
Created LAG VPC PDU task failed
Failed to create dot3ad tasks
Alert
Created LAG task failed
Unable to create dot3ad configure semaphore()
Alert
Created LAG configure semaphore failed
Unable to create dot3ad Intf create semaphore()
Alert
Created LAG interface semaphore failed
Unable to create dot3ad task semaphore()
Alert
Created LAG task semaphore failed
Unable to create dot3ad timer semaphore()
Alert
Cretaed LAG timer semaphore failed
Unable to create dot3adQueueSync semaphore()
Alert
Created LAG queue semaphore failed
Unable to initialize dot3ad_lac_task()
Message Collection
December/2018 339
Message Collection
Alert
Initialization LAG task failed
Unable to initialize dot3ad_mlag_pdu_task()
Alert
Initialization LAG VPC PDU task failed
Unable to initialize dot3ad_timer_task()
Alert
Initialization LAG timer task failed
FUJITSU PSWITCH
DOT3AD: notification failed for event(<EventID>), intf(<InterfaceNumber>), reason(<ErrorCode>)
Critical
Received NIM unconfigure notify event failed
<EventID> Event ID
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<ErrorCode> Error code
DOT3AD: notification failed for event(<EventID>), intf(<InterfaceNumber>), reason(<ErrorCode>). The event sent to
NIM was not completed successfully
Critical
NIM event notification failed
<EventID> Event ID
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<ErrorCode>
0/1, 0/0/1
Error code
VPC <ID> already assigned to LAG <InterfaceNumber>
340 December/2018
FUJITSU PSWITCH
Debug
Message Collection
VPC ID already assigned to LAG interface
<ID> ID
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<FunctionName>:dot3adIntfAttach failed Rc is <ErrorCode> for intf
<InterfaceNumber>
Error
Getting information from database failed
<FunctionName> Log is created by this function.
<ErrorCode> Error code
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<FunctionName>:failed to get intf type for intf <InterfaceNumber>
Error
Getting interface type failed
<FunctionName> Log is created by this function.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<FunctionName>:failed to send notification <ID> for intf
<InterfaceNumber>
Error
Specific interface send notification event failed
<FunctionName> Log is created by this function.
<ID> ID
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Cannot find aggregator(<InterfaceNumber>) for this interface(<InterfaceNumber>)
December/2018 341
Message Collection
Error
FUJITSU PSWITCH
According to input interface can not find aggregator
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Cannot send message to Dot3ad Queue rc(<ErrorCode>)
Error
Send NIM interface startup event to queue failed
<ErrorCode> Error code
Could not init DOT3AD MLAG PDU task (<ErrorCode>) <FunctionName>
Error
Initialization LAG VPC PDUs task failed
<ErrorCode> Error code
<FunctionName> Log is created by this function.
De-registration with MLAG fail (<ErrorCode>) <FunctionName>
Error
De-register VPC backcall function failed
<ErrorCode> Error code
<FunctionName> Log is created by this function.
DOT3ad: Number of dynamic lag ports: <InterfaceNumber> exceeds maximum limit <SizeValue>
Error
VPC operationally down when VPC member portsexceed maximum limit
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<SizeValue>
0/1, 0/0/1
An integer for a specific range or a limit value.
Error allocating buffers for DOT3AD VPC control messages
Error
VPC control message buffer memory allocate failed
Error in creating Intf <InterfaceNumber>
342 December/2018
FUJITSU PSWITCH
Error
Message Collection
Created LAG interface failed
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Error in processing LACPDU received on interface
<InterfaceNumber>
Error
Processing LACP PDUs failed
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Error in processing lag pdu <ErrorCode>
Error
Processing LACP PDUs failed
<ErrorCode> Error code
Error in transmitting LACPDU received on interface
<InterfaceNumber> to peer, dropping the packet
Error
Transmitting LACP PDU to peer failed
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Error: Failed to send event <EventID> for interface
<InterfaceNumber> in mlag <ID>
Error
Send NIM event to peer device failed
<EventID> Event ID
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<ID> ID
Failed to disable the peer interface <InterfaceNumber>
<ErrorMessage>
December/2018 343
Message Collection
Error
FUJITSU PSWITCH
Disabled peer interface failed
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<ErrorMessage>
0/1, 0/0/1
Error message
Failed to enable the peer interface <InterfaceNumber>
<ErrorMessage>
Error
Enabled peer interface failed
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<ErrorMessage> Error message
Failed to send interface(<InterfaceNumber>) add information to peer
Error
Send VPC add interface information to peer failed
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to send interface(<InterfaceNumber>) delete information to peer
Error
Send VPC delete interface information to peer failed
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to send interface(<InterfaceNumber>) speed information to peer
Error
Send interface speed information to peer failed
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to send NIM event <EventID> for interface <InterfaceNumber> to peer <ErrorMessage>
344 December/2018
FUJITSU PSWITCH
Error
Message Collection
Send NIM interface event to peer failed
<EventID> Event ID
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<ErrorMessage> Error message
Failed to set hash mode <State> for lag <InterfaceNumber>
Error
Setting LAG interface hash mode failed
<State> State
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Invalid mode for static lags <InterfaceNumber>: <State>!
Error
Input static mode parameter error
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<State> State
MLAG peer lag info de-init fail (<ErrorCode>) <InterfaceNumber>
Error
De-init VPC peer LAG information failed
<ErrorCode> Error code
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
MLAG peer lag info init fail (<ErrorCode>) <InterfaceNumber>
Error
VPC peer information init failed
<ErrorCode> Error code
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Registration with MLAG fail (<ErrorCode>) <InterfaceNumber>
December/2018 345
Message Collection
Error
FUJITSU PSWITCH
Register VPC callback function failed
<ErrorCode> Error code
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
aggStaticModeSet: Static to Dynamic:Failure to Send lacpBegin for configured port : <InterfaceNumber>
Informational
Send begin event to state machine failed for cinfigured port
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
aggStaticModeSet: Static to Dynamic:Failure to Send lacpPortEnabledLacpDisabled for configured port :
<InterfaceNumber>
Informational
Send port mode LACP disabled event to state machine failed for cinfigured port
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
aggStaticModeSet: Dynamic to Static: Failure sending lacpDisablePerMachine for active port : <InterfaceNumber>
Informational
Send mode change event to state machine failed when active port mode from dynamic to static
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
aggStaticModeSet: Dynamic to Static: Failure to get authstate for port <InterfaceNumber>
346 December/2018
FUJITSU PSWITCH
Informational
Message Collection
Getting port interface authorization failed
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
aggStaticModeSet: Dynamic to Static:Failure to Send lacpBegin for configured port : <InterfaceNumber>
Informational
Send begin event to state machine failed for cinfigured port
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
aggStaticModeSet: Dynamic to Static:Failure to Send lacpPortEnabledStaticLag for configured port : <InterfaceNumber>
Informational
Send port mode static enabled event to state machine failed for cinfigured port
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
aggStaticModeSet: Static to Dynamic: Failure to get authstate for port <InterfaceNumber>
Informational
Getting port authorization state failed
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
aggStaticModeSet: Static to Dynamic:Failure to Send lacpPortEnabledLacpEnabled for configured port :
<InterfaceNumber>
Informational
Send port mode LACP enabled event to state machine failed for cinfigured port
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
DOT3AD: Cannot start trace
December/2018 347
Message Collection
Informational
Start LAG trace failed
DOT3ad: Error in previous configuration stored
Informational
Stored previous configuration failed
DOT3ad: failed to create the interface
Informational
Created LAG interface failed
FUJITSU PSWITCH
DOT3AD: failed to get the MAC address of LagID(<ID>)
Informational
Getting LAG interface MAC address failed
<ID> ID
DOT3ad: Forcing Lag <ID> to be static
Informational
Forcing Lag to be static
<ID> ID
DOT3AD: notification received for unknown event(<EventID>), intf(<InterfaceNumber>), reason(<ErrorCode>)
Informational
LAG create callback received unknown event
<EventID> Event ID
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<ErrorCode> Error code
DOT3ad: Number of dynamic lag ports: <InterfaceNumber> exceeds maximum limit <SizeValue>
348 December/2018
FUJITSU PSWITCH
Informational
Message Collection
Dynamic LAG ports exceeds maximum limit
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<SizeValue>
0/1, 0/0/1
An integer for a specific range or a limit value.
DOT3AD: Unable to create msg queue for dot3ad_mlag_pdu_task
Informational
Created LAG VPC PDU task message failed
DOT3AD: unable to create the trace buffer
Informational
Created LAG trace buffer failed
Dot3ad: unable to delete the event trace buffer
Informational
Delete LAG trace buffer failed
dot3adThresholdSet: Port-Channel <LagInterface> threshold is changed from <SizeValue> to <SizeValue>
Informational
LAG threshold change information
<LagInterface> 80-143
<SizeValue> An integer for a specific range or a limit value.
dot3adTimerTask: Failed to put msg in timer queue....
Informational
Send message to LAG timer queue failed
Error on call to osapiFsWrite routine on config file <FileName>
December/2018 349
Message Collection
Informational
Write configuration to config file error
<FileName> Log is created by this file.
FUJITSU PSWITCH
Interface <InterfaceNumber> added to <LagInterface>
Informational
Added interface to specific LAG
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<LagInterface>
0/1, 0/0/1
80-143
Interface <InterfaceNumber> attached to <LagInterface>
Informational
Attached interface to specific LAG
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<LagInterface>
0/1, 0/0/1
80-143
Interface <InterfaceNumber> detached from <LagInterface>
Informational
Detached interface to specific LAG
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<LagInterface>
0/1, 0/0/1
80-143
Interface <InterfaceNumber> removed from <LagInterface>
Informational
Removed interface to specific LAG
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<LagInterface>
0/1, 0/0/1
80-143
Interface to USP failure Port <InterfaceNumber>
350 December/2018
FUJITSU PSWITCH
Informational
Message Collection
Get specific interface unit, slot, port information failed
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Invalid mode for static lags <InterfaceNumber>: <State>!
Informational
Input static mode parameter error
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<State> State
LAG: Unable to create msg queue for dot3ad_lac_task
Informational
Created LAG task message queue failed
LAG: Unable to create msg queue for dot3ad_timer_tas
Informational
Created LAG timer task message queue failed
Tech Support Registration failed for DOT3AD related commands
Informational
Register tech supports LAG related commands failed
<FunctionName>: Error allocating data for dot3ad mlag peer info tree
Notice
LAG relate VPC peer information buffer memory allocate failed
<FunctionName> Log is created by this function.
<FunctionName>: Error allocating data for dot3ad mlag self info tree
December/2018 351
Message Collection
Notice
LAG relate VPC self information buffer memory allocate failed
<FunctionName> Log is created by this function.
FUJITSU PSWITCH
<FunctionName>: Error allocating memory for dot3ad port for MLAG peer device
Notice
LAG relate VPC peer device information buffer memory allocate failed
<FunctionName> Log is created by this function.
<LagInterface> is down
Notice
Interface down
<LagInterface> 80-143
<LagInterface> is up
Notice
Interface up
<LagInterface> 80-143
<InterfaceNumber> configured as Peer-Link. Cannot configure as
VPC
Warning
LAG interface cannot configure as VPC while configured as peer-link
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Bad rc <ErrorCode> in dot3adNotifyRegisterdUsers for registar
<ComponentID>
Warning
Register LAG notify request function failed
<ErrorCode> Error code
<ComponentID> Component ID
Disabling the LAG member port <InterfaceNumber> as the LAG interface <LagInterface> is administratively disabled
352 December/2018
FUJITSU PSWITCH
Warning
Message Collection
Disabled LAG member port administratively
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<LagInterface>
0/1, 0/0/1
80-143
Error allocating buffer pools for the received dot3ad data message
Warning
LAG PDU memory buffer allocate failed
Error! Length(<SizeValue> bytes) of the received DOT3AD data message is greater than <SizeValue> bytes.Hence droping the message
Warning
Received LAG data packet is greater than maximum size
<SizeValue> An integer for a specific range or a limit value.
Error! Length(<SizeValue> bytes) of the received DOT3AD VPC control message is greater than <SizeValue> bytes.Hence droping the message
Warning
Received LAG VPC control packet is greater than maximum size
<SizeValue> An integer for a specific range or a limit value.
Error! Queuing the control message event to dot3ad task failed
Warning
Send control message event to LAG task failed
Error! Queuing the data message event to dot3ad task failed
Warning
Send data message event to LAG task failed
Failed to send ACK for transactionID <ID>
December/2018 353
Message Collection
Warning
Sending VPC control ACK packet to peer failed
<ID> ID
FUJITSU PSWITCH
Setting the admin mode on interface <InterfaceNumber> (vpc id
<ID>) is disabled when the VPC interface state is ERROR. Please rectify the ERROR to continue
Warning
Setting the admin mode on interface is disabled when the VPC interface state is error
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<ID>
0/1, 0/0/1
ID
Speed of interface <LagInterface> is not same as that of already existing members of LAG interface <InterfaceNumber>. Hence not adding interface <LagInterface> as active member of LAG
Warning
New added port interface speed different active member of LAG
<LagInterface> 80-143
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
The VPC id <ID> configured on LAG interface <LagInterface> is in error state. Bringing down the interface <InterfaceNumber>
Warning
The VPC id configured on LAG interface is in error state.
<ID> ID
<LagInterface> 80-143
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
VPC <ID> already assigned to LAG <LagInterface>
354 December/2018
FUJITSU PSWITCH
Warning
VPC ID already assigned to LAG interface
<ID> ID
<LagInterface> 80-143
2.1.21.
DRIVER
Message Collection
After table scan: Multicast groups in hw (<CountValue>) and in table (<CountValue>)
Alert
Display the multicast groups check result between hardware and software table.
<CountValue> Count Value
Failed to disable unit <ID> port <InterfaceNumber> error
<ErrorCode>
Alert
Failed to disable a port.
<ID> ID
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<ErrorCode>
0/1, 0/0/1
Error code
hapiBroadMmuInit returned <ErrorCode>
Alert
Error return in hapiBroadMmuInit function.
<ErrorCode> Error code
Multicast group <ID> marked unused but in hardware
Alert
Find out an entry is not in use, but check for hardware flag.
<ID> ID
Multicast groups in hw (<CountValue>) > in table (<CountValue>); verify table
December/2018 355
Message Collection
Alert
FUJITSU PSWITCH
Multicast groups in hardware and software not equal, start to check.
<CountValue> Count Value
sysconf_attach returned failure <ErrorCode>
Alert
Error return in sysconf_attach function.
<ErrorCode> Error code
usl_bcmx_ipmc_add existing: group = <IPAddress>, source =
<IPAddress>, vlan = <ID>, rv = <ErrorCode>
Alert
The multicast IP entry was already exist in hardware.
<IPAddress> ip_address, or, ipv6_address, or hostname
<ID> ID
<ErrorCode> Error code
usl_bcmx_ipmc_remove failed: group = <IPAddress>, source =
<IPAddress>, vlan = <ID>, rv = <ErrorCode>
Alert
Failed to remove IP multicast entry from hardware. Return fail by function usl_bcmx_ipmc_remove.
<IPAddress> ip_address, or, ipv6_address, or hostname
<ID> ID
<ErrorCode> Error code
<FileName>():<FileLineNumber> Critical failure encountered while initializing l2ol3 tunnel driver. errcode=<ErrorCode>
Critical
Critical failure encountered while initializing l2ol3 tunnel driver. Failed to allocate memory.
<FileName> Log is created by this file.
<FileLineNumber> Log is created by this line.
<ErrorCode> Error code
<FileName>/<FileLineNumber>: Failed to set the bit
BCM_VLAN_UNKNOWN_IP4_MCAST_TOCPU for VLAN <ID>
356 December/2018
FUJITSU PSWITCH
Critical
Message Collection
Failed to set the flag BCM_VLAN_UNKNOWN_IP4_MCAST_TOCPU . Return fail by function usl_bcmx_vlan_control_flag_update.
<FileName> Log is created by this file.
<FileLineNumber>
<ID>
Log is created by this line.
ID
bcm_port_vlan_priority_mapping_set failed rv <ErrorCode>
Critical
Failed to set VLAN priority which is unused in ROBO to 1
<ErrorCode> Error code
Could not convert internal port number. It is recommended that unit <ID> be power cycled. call to hapiBroadLportToUnitPort failed with RC = <ErrorCode>. USP = <InterfaceNumber> hapiPortPtr->hapi_broad_lport = <InterfaceNumber>
Critical
Could not convert internal port number. Return fail by function hapiBroadLportToUnitPort.
<ID> ID
<ErrorCode> Error code
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Could not get current phy configuration from unit <ID>. It is recommended that unit be power cycled. call to bcmx_port_medium_get failed with RC = <ErrorCode>. USP = <InterfaceNumber> lport =
<InterfaceNumber> speed = <GetValue> duplex = <GetValue>
December/2018 357
Message Collection
Critical
FUJITSU PSWITCH
Could not get phy configuration. Return fail by function usl_bcmx_port_medium_get.
<ID> ID
<ErrorCode> Error code
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<GetValue>
0/1, 0/0/1
Get Value
Could not set PHY jam configuration. It is recommended that unit
<ID> be power cycled. call to usl_bcmx_port_jam_set failed with RC
= <ErrorCode>. USP = <InterfaceNumber> hapiPortPtr->hapi_broad_lport = <InterfaceNumber>
Critical
Could not set PHY jam configuration. Return fail by function usl_bcmx_port_jam_set.
<ID> ID
<ErrorCode> Error code
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Could not set PHY pause configuration. It is recommended that unit
<ID> be power cycled. call to usl_bcmx_port_pause_set failed with
RC = <ErrorCode>. USP = <InterfaceNumber> mac_pause_tx =
<SetValue> mac_pause_rx = <SetValue>
Critical
Could not set PHY pause configuration. Return fail by function usl_bcmx_port_pause_set.
<ID> ID
<ErrorCode> Error code
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<SetValue> Set Value
Couldn't allocate egress mask!
Critical
Failed to allocate a block of memory for egress mask. Out of resources.
Couldn't allocate from egress mask pool!
358 December/2018
FUJITSU PSWITCH
Critical
Message Collection
Failed to allocate a block of memory for egress mask. Out of resources.
Couldn't get CPU port info.
Critical
Failed to add a policy actions. Get an invalid CPU port.
Custom policy init failed
Critical
Failed to initialize Custom policy in hardware.
Driver failed to create <CountValue> vlans in the hardware
Critical
Failed to create a specific vlan in the hardware.
<CountValue> Count Value
Driver failed to set Openflow platform constants, hpcBoardGet failed
Critical
Failed to get board information. Return fail by function hpcBoardGet.
Driver failed to set the Cpu cosq hardware rate limits, error code
<ErrorCode>
Critical
Failed to set CPU cosq hardware rate limits.
<ErrorCode> Error code
Failed to delete IPv6 default route, error code <ErrorCode>
Critical
Failed to delete the default ipv6 route in the hardware. Return fail by function usl_bcmx_l3_route_delete.
<ErrorCode> Error code
Failed to disable L2 destination hit <ErrorCode>
December/2018 359
Message Collection
Critical
Failed to disable L2 destination hit.
<ErrorCode> Error code
FUJITSU PSWITCH
Failed to install IPv4 default route vrf:<ID>, error code
<ErrorCode>
Critical
Failed to add the default ipv4 route in the hardware. Return fail by function usl_bcmx_l3_route_add.
<ID> ID
<ErrorCode> Error code
Failed to install IPv6 default route, error code <ErrorCode>
Critical
Failed to add the default ipv6 route in the hardware. Return fail by function usl_bcmx_l3_route_add.
<ErrorCode> Error code
Failed to invalidate IPSubnet Vlan Db, dbTypes <TypeValue>
Critical
Failed to reset the database tables to the default. There is no table to invalidate.
<TypeValue> Type Value
Failed to invalidate L2Mc Db, dbTypes <TypeValue>
Critical
Failed to reset the database tables to the default. There is no table to invalidate.
<TypeValue> Type Value
Failed to invalidate l3 intf Db, dbTypes <TypeValue>
Critical
Failed to reset the database tables to the default. There is no table to invalidate.
<TypeValue> Type Value
Failed to invalidate l3 mpath_nhop Db, dbTypes <TypeValue>
360 December/2018
FUJITSU PSWITCH
Critical
Message Collection
Failed to reset the database tables to the default. There is no table to invalidate.
<TypeValue> Type Value
Failed to invalidate l3 nhop Db, dbTypes <TypeValue>
Critical
Failed to reset the database tables to the default. There is no table to invalidate.
<TypeValue> Type Value
Failed to invalidate Mac Vlan Db, dbTypes <TypeValue>
Critical
Failed to reset the database tables to the default. There is no table to invalidate.
<TypeValue> Type Value
Failed to invalidate private group Db, dbTypes <TypeValue>
Critical
Failed to reset the database tables to the default. There is no table to invalidate.
<TypeValue> Type Value
Failed to invalidate protcted group Db, dbTypes <TypeValue>
Critical
Failed to reset the database tables to the default. There is no table to invalidate.
<TypeValue> Type Value
Failed to invalidate Stg Db, dbTypes <TypeValue>
Critical
Failed to reset the database tables to the default. There is no table to invalidate.
<TypeValue> Type Value
Failed to invalidate system Db, dbTypes <TypeValue>
December/2018 361
Message Collection
Critical
FUJITSU PSWITCH
Failed to reset the database tables to the default. There is no table to invalidate.
<TypeValue> Type Value
Failed to invalidate trill mcast Db, dbTypes <TypeValue>
Critical
Failed to reset the database tables to the default. There is no table to invalidate.
<TypeValue> Type Value
Failed to invalidate trill rbridge Db, dbTypes <TypeValue>
Critical
Failed to reset the database tables to the default. There is no table to invalidate.
<TypeValue> Type Value
Failed to invalidate trill rpf Db, dbTypes <TypeValue>
Critical
Failed to reset the database tables to the default. There is no table to invalidate.
<TypeValue> Type Value
Failed to invalidate Trunk Db, dbTypes <TypeValue>
Critical
Failed to reset the database tables to the default. There is no table to invalidate.
<TypeValue> Type Value
Failed to invalidate Vlan Db, dbTypes <TypeValue>
Critical
Failed to reset the database tables to the default. There is no table to invalidate.
<TypeValue> Type Value
Failed to invalidate Vlan flood block Db, dbTypes <TypeValue>
362 December/2018
FUJITSU PSWITCH
Critical
Message Collection
Failed to reset the database tables to the default. There is no table to invalidate.
<TypeValue> Type Value
Failed to set Hash mode <ErrorCode>
Critical
Failed to set default hash mode.
<ErrorCode> Error code
hapiBroadMcastHardwareSetIfs: not in hardware group = <IPAddress>, source = <IPAddress>, vlan = <ID>
Critical
Invalid input for hapiBroadMcastHardwareSetIfs. The multicast entry not in hardware table.
<IPAddress> ip_address, or, ipv6_address, or hostname
<ID> ID
hapiBroadOF13EcmpGroupDestroy: failed to delete id:<ID> from HW
Critical
Failed to delete an ECMP group. Return fail by function usl_bcmx_l3_egress_ecmp_destroy.
<ID> ID
hapiBroadOF13L3IntfDelete: failed for id:<ID>
Critical
Failed to delete L3 interface. Return fail by function usl_bcmx_l3_intf_delete.
<ID> ID
hapiBroadOF13L3NextHopDelete: failed for id:<ID> rc:<ErrorCode> rv=<ErrorMessage>.
December/2018 363
Message Collection
Critical
MMU flush failed.
<ID>
<ErrorCode>
<ErrorMessage>
ID
Error code
Error message
FUJITSU PSWITCH
L7_L3_MCAST_ROUTE_TBL_SIZE_TOTAL (<MaxValue>) reached, trying to add more
Critical
The rounting table index is too large. Driver try to tell the application this condition.
<MaxValue> Maximum value
MMU flush for unit <ID> port <InterfaceNumber> timed out.
Critical
MMU flush is time out.
<ID> ID
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Rule not found.
Critical
Failed to modify policy rule. Rule not found.
Too many cells are reserved, setting MMU shared limit to zero.
Critical
MMU sells config error.
Unable to initialize tcam API
Critical
Failed to initial the TCAM API. Return fail by function broad TcamApiInit
USL policy RPC init failed
364 December/2018
FUJITSU PSWITCH
Critical
Failed to initialize USL Policy in hardware.
Message Collection
USL: IP Subnet vlan database creation failed
Critical
Error during initializing Layer 2 Database. It may failed to allocate memory, register a table in USL, create semaphore etc.
USL: L2 Multicast database creation failed
Critical
Error during initializing Layer 2 Database. It may failed to allocate memory, register a table in USL, create semaphore etc.
USL: L3 egress nexthop database creation failed
Critical
Error during initializing Layer 2 Database for TRILL. It may failed to allocate memory, register a table in USL, create semaphore etc.
USL: L3 egress nexthop hardware id generation failed
Critical
Error during initializing Layer 2 Database for TRILL. It may failed to allocate memory, register a table in USL, create semaphore etc.
USL: L3 hardware id generation failed
Critical
Error during initializing Layer 2 Database for TRILL. It may failed to allocate memory, register a table in USL, create semaphore etc.
USL: L3 interface database creation failed
Critical
Error during initializing Layer 2 Database for TRILL. It may failed to allocate memory, register a table in USL, create semaphore etc.
USL: L3 Multipath/ECMP nexthop database creation failed
December/2018 365
Message Collection
Critical
FUJITSU PSWITCH
Error during initializing Layer 2 Database for TRILL. It may failed to allocate memory, register a table in USL, create semaphore etc.
USL: L3 Multipath/ECMP nexthop hardware id generation failed
Critical
Error during initializing Layer 2 Database for TRILL. It may failed to allocate memory, register a table in USL, create semaphore etc.
USL: MAC VLAN database creation failed
Critical
Error during initializing Layer 2 Database. It may failed to allocate memory, register a table in USL, create semaphore etc.
USL: Private Group database creation failed
Critical
Error during initializing Layer 2 Database. It may failed to allocate memory, register a table in USL, create semaphore etc.
USL: Protected Group database creation failed
Critical
Error during initializing Layer 2 Database. It may failed to allocate memory, register a table in USL, create semaphore etc.
USL: Spanning Tree Group database creation failed
Critical
Error during initializing Layer 2 Database. It may failed to allocate memory, register a table in USL, create semaphore etc.
USL: System database creation failed
366 December/2018
FUJITSU PSWITCH
Critical
Message Collection
Error during initializing Layer 2 Database. It may failed to allocate memory, register a table in USL, create semaphore etc.
USL: TRILL AVF database creation failed
Critical
Error during initializing Layer 2 Database for TRILL. It may failed to allocate memory, register a table in USL, create semaphore etc.
USL: TRILL Multicast database creation failed
Critical
Error during initializing Layer 2 Database for TRILL. It may failed to allocate memory, register a table in USL, create semaphore etc.
USL: TRILL Multicast Group database creation failed
Critical
Error during initializing Layer 2 Database for TRILL. It may failed to allocate memory, register a table in USL, create semaphore etc.
USL: TRILL Rbridge database creation failed
Critical
Error during initializing Layer 2 Database for TRILL. It may failed to allocate memory, register a table in USL, create semaphore etc.
USL: TRILL RPF database creation failed
Critical
Error during initializing Layer 2 Database for TRILL. It may failed to allocate memory, register a table in USL, create semaphore etc.
USL: Trunk database creation failed
December/2018 367
Message Collection
Critical
FUJITSU PSWITCH
Error during initializing Layer 2 Database. It may failed to allocate memory, register a table in USL, create semaphore etc.
USL: Unit <ID> left the stack unexpectedly. Power cycle of the unit is recommended.
Critical
Failed to get remote unit. Power cycle of the unit is recommended.
<ID> ID
USL: VLAN database creation failed
Critical
Error during initializing Layer 2 Database. It may failed to allocate memory, register a table in USL, create semaphore etc.
USL: VLAN flood block database creation failed
Critical
Error during initializing Layer 2 Database. It may failed to allocate memory, register a table in USL, create semaphore etc.
usl_bcmx_ipmc_add <ErrorMessage>: group = <IPAddress>, source =
<IPAddress>, vlan = <ID>, port = <InterfaceNumber>, rv =
<ErrorCode>
Critical
Add a multicast IP entry fail. Return fail by usl_bcmx_ipmc_add.
<ErrorMessage> Error message
<IPAddress>
<ID> ip_address, or, ipv6_address, or hostname
ID
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<ErrorCode> Error code
usl_bcmx_ipmc_remove failed: group = <IPAddress>, source =
<IPAddress>, vlan = <ID>, rv = <ErrorCode>
368 December/2018
FUJITSU PSWITCH
Critical
Message Collection
Failed to delete multicast IP entry. Return fail by function usl_bcmx_ipmc_remove.
<IPAddress> ip_address, or, ipv6_address, or hostname
<ID>
<ErrorCode>
ID
Error code
Vlan bulk cmd <Command> failed rv <ErrorCode>
Critical
Failed to create/delete multiple vlans in the hardware.
<Command> Command
<ErrorCode> Error code
USL: EVB database creation failed.
Critical
Error during initializing EVB Database. It may failed to allocate memory, register a table in USL, create semaphore etc.
Failed to invalidate EVB Db, dbTypes <TypeValue>.
Critical
Failed to reset the database tables to the default. There is no table to invalidate.
<TypeValue> Type Value
<FileName> <FileLineNumber>: In <FunctionName> Failed to configure USP <InterfaceNumber>
Debug
BCMX invokes bcm_client_* APIs to RPC bcm calls on remote units, when units are detached, BCM_E_RESOURCE may be returned. Fail gracefully when the member unit is no longer available.
<FileName> Log is created by this file.
<FileLineNumber> Log is created by this line.
<FunctionName> Log is created by this function.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<FileName>, <FunctionName>, +<FileLineNumber> vlanId=<ID>, disable=<SetValue>
December/2018 369
Message Collection
Debug
FUJITSU PSWITCH
A debug message about enabling/disabling vlan learning on the switch.
<FileName> Log is created by this file.
<FunctionName>
<FileLineNumber>
<ID>
<SetValue>
Log is created by this function.
Log is created by this line.
ID
Set Value
BCMX ports. Unit:<ID>, Slot:<SlotNumber>, Port:<InterfaceNumber>, lport:<InterfaceNumber>, uport:<InterfaceNumber>
Debug
Display module port to logical port mapping.
<ID> ID
<SlotNumber> Slot number
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Cannot add host entry <IPAddress> associated to interface
<InterfaceNumber> to host table. rv = <ErrorCode>
Debug
Show entryies from host table that cannot be added.
<IPAddress> ip_address, or, ipv6_address, or hostname
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<ErrorCode>
0/1, 0/0/1
Error code
Command <Command> (<TypeValue>) received for usp
<InterfaceNumber> with no card present: Request ignored - operations proceeding.
Debug
A port was not able to be translated correctly during the receive.
<Command> Command
<TypeValue> Type Value
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to match VFI(<VlanID>)/VP(<InterfaceNumber>) to AppPortId for MAC=<MacAddress> Tenant=<ID>
370 December/2018
FUJITSU PSWITCH
Debug
Message Collection
Failed to get a the mapping of application port and hardware port in AVL tree. The tenant is found.
<VlanID> VLAN ID
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<MacAddress>
<ID>
MAC address
ID
Failed to match VFI(<VlanID>)/VP(<InterfaceNumber>) to AppPortId for MAC=<MacAddress> Tenant=Unknown
Debug
Failed to get a the mapping of application port and hardware port in AVL tree. The tenant is not found.
<VlanID> VLAN ID
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<MacAddress> MAC address
glblUnit=<ID> lport=<InterfaceNumber> mod/port=<InterfaceNumber> rc=<ErrorCode>
Debug
A debug message about the failure of getting remote unit.
<ID> ID
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<ErrorCode> Error code
HAPI LPORT: Attaching unit <ID>
Debug
Start attaching process by function hapiBroadDeviceAttach.
<ID> ID
HAPI LPORT: Detaching unit <ID>
December/2018 371
Message Collection
Debug
hapiBroadDeviceDetach function be called.
<ID> ID
FUJITSU PSWITCH
HAPI LS callback, u <UnitID>. p <InterfaceNumber>
Debug
hapiBroadBcmLsCb function be called.
<UnitID> Unit ID
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
HAPI LS enable set, <SetValue>
Debug
hapiBroadLinkscanEnableSet function be callled.
<SetValue> Set Value
HAPI LS reg, <SetValue>
Debug
hapiBroadLinkscanRegister function be called.
<SetValue> Set Value
HAPI LS unreg, <SetValue>
Debug
hapiBroadLinkscanUnregister function be called.
<SetValue> Set Value
hapiBroadTxLplist: No TX ports given
Debug
Invalid input for function hapiBroadTxLplist.
Host table is full. Cannot add host entry <IPAddress> associated to interface <InterfaceNumber>. Likely hash chain exhaustion.
372 December/2018
FUJITSU PSWITCH
Debug
Message Collection
Failed to add host entry due to host table is full or hash chain exhaustion.
<IPAddress> ip_address, or, ipv6_address, or hostname
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
In <FunctionName>: Deleting <IPAddress> <IPAddress> <VlanID>
Debug
A debug message when removing all IPMC L3 entries from the multicast group.
<FunctionName> Log is created by this function.
<IPAddress>
<VlanID> ip_address, or, ipv6_address, or hostname
VLAN ID
In <FunctionName>: Failed bcm_ipmc_remove <ErrorCode>
Debug
Failed to remove IPMC entry in hardware.
<FunctionName> Log is created by this function.
<ErrorCode> Error code
In <FunctionName>: Failed bcm_multicast_destroy <ErrorCode>
Debug
Failed to destroy multicast group in hardware.
<FunctionName> Log is created by this function.
<ErrorCode> Error code
In <FunctionName>: Failed in bcm_ipmc_add <ErrorCode>
Debug
Tried to add IPMC L3 entry to new multicast group but failed. Try it again later.
<FunctionName> Log is created by this function.
<ErrorCode> Error code
In <FunctionName>: Failed in bcm_multicast_create <ErrorCode>
December/2018 373
Message Collection
Debug
Failed to create the multicast group in hardware.
<FunctionName> Log is created by this function.
<ErrorCode> Error code
FUJITSU PSWITCH
In <FunctionName>: Failed in bcm_multicast_destroy <ErrorCode>
Debug
Failed to destroy the multicast when some of IPMC entries cannot be deleted in previous recovering multicast group.
<FunctionName> Log is created by this function.
<ErrorCode> Error code
In <FunctionName>: Failed to remove all IPMC entries count=<CountValue> ref_count=<CountValue> rv=<ErrorCode>
Debug
Failed to remove all IPMC L3 entries from the multicast group. A few entries cannot be deleted.
<FunctionName> Log is created by this function.
<CountValue>
<ErrorCode>
Count Value
Error code
In <FunctionName>: Failed usl_db_ipmc_add <ErrorCode>
Debug
Failed to add IPMC L3 entry to USL database.
<FunctionName> Log is created by this function.
<ErrorCode> Error code
In <FunctionName>: Failed usl_db_ipmc_remove <ErrorCode>
Debug
Failed to remove IPMC entry from USL database.
<FunctionName> Log is created by this function.
<ErrorCode> Error code
In <FunctionName>: RECOVERING(<ID>) From bcm_multicast_add
<ErrorCode>
374 December/2018
FUJITSU PSWITCH
Debug
Try to remove all IPMC entries and try to add again.
<FunctionName> Log is created by this function.
<ID>
<ErrorCode>
ID
Error code
Message Collection
In <FunctionName>: RECOVERING(<ID>) From bcm_multicast_create
<ErrorCode>
Debug
The multicast group exists. Driver will try to remove all IPMC entries that are part of it before attempting to add a new one.
<FunctionName> Log is created by this function.
<ID> ID
<ErrorCode> Error code
Returning without tunneling through software
Debug
Tunneling feature is not present.
USL : Policy <ID> has already been applied on port
<InterfaceNumber>
Debug
A debug message showing status of policy applied on a port.
<ID> ID
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
USL : Policy <ID> is not applied on port <InterfaceNumber>
Debug
A debug message showing status of policy applied on a port.
<ID> ID
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
USL returned <ErrorCode> while <Command> <MacAddress> vid <ID>.
December/2018 375
Message Collection
Debug
A L2 Multicast MAC entry is already in USL while adding.
<ErrorCode> Error code
<Command>
<MacAddress>
<ID>
Command
MAC address
ID
FUJITSU PSWITCH
USL returned <ErrorCode> while deleting <MacAddress> vid <ID> from
HW.
Debug
A L2 Multicast MAC entry is not found in USL.
<ErrorCode> Error code
<MacAddress>
<ID>
MAC address
ID
USP(<InterfaceNumber>) does not match HAPI table contents
<InterfaceNumber>
Debug
User port not match HAPI table when system want to remove a multicast routing entry.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
USL: RPC buffer not allocated
Emergency
No buffer to get. USL probably haven't initialized yet.
USL: unable to allocate buffer before USL is initted
Emergency
USL haven't initialized yet.
USL: unable to allocate l7RpcReqMsgBuf
Emergency
Failed to allocate a block of memory. Out of resources.
USL: unable to create the l7RpcReqMsgBufSema
376 December/2018
FUJITSU PSWITCH
Emergency
Failed to create semaphore.
USL: unable to create the l7RpcRespMsgBufSema
Emergency
Failed to create semaphore.
USL: unable to free RPC buffer
Emergency
No buffer to free. USL probably haven't initialized yet.
Message Collection
<FunctionName> - Invalid Next Hop USP (<InterfaceNumber>)
Error
Failed to process the next hips associated with the given route. Get an invalid net hop port.
<FunctionName> Log is created by this function.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<FunctionName>: Couldn't get switch hash contol for trunk:<ID> bcm unit:<ID> rv:<ErrorCode> (<ErrorMessage>)
Error
Failed to get switch hash control for trunk from hardware.
<FunctionName> Log is created by this function.
<ID> ID
<ErrorCode>
<ErrorMessage>
Error code
Error message
<FunctionName>: Couldn't set load balancing mode:<ID>, rv =
<ErrorCode>
December/2018 377
Message Collection
Error
FUJITSU PSWITCH
Failed to set L3 ECMP load balancing mode. Return fail by function usl_bcmx_l3_ecmp_lb_set.
<FunctionName> Log is created by this function.
<ID>
<ErrorCode>
ID
Error code
<FunctionName>: Couldn't set switch hash contol:<SetValue> for trunk:<ID> bcm unit:<ID> rv:<ErrorCode> (<ErrorMessage>)
Error
Failed to set switch hash control for trunk to hardware.
<FunctionName> Log is created by this function.
<SetValue> Set Value
<ID>
<ErrorCode>
<ErrorMessage>
ID
Error code
Error message
<FunctionName>: OF1.3 Rule:<ID> install failed, match port
<InterfaceNumber> is invalid.
Error
Failed to add openflow 1.3 rule. The input port number is invalid.
<FunctionName> Log is created by this function.
<ID> ID
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
appPortId <ID> :: Couldn't find USL port db element <ErrorCode>
Error
Couldn't find VXLAN network port in USL to modify UDP destination port.
<ID> ID
<ErrorCode> Error code
appPortId <ID> :: This is not a VXLAN network port. UDP destination port <InterfaceNumber> cannot be configured for non VXLAN type tunnel in USL
378 December/2018
FUJITSU PSWITCH
Error
Message Collection
This is not a VXLAN network port. UDP destination port cannot be configured for non VXLAN type tunnel in USL.
<ID> ID
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Bad IPMC index <SetValue>
Error
IPMC index out of range.
<SetValue> Set Value
bcm_port_dscp_map_get(Unit=<ID>, Port=<InterfaceNumber>) failed rv=<ErrorCode>
Error
Failed to get a mapping for diffserv code points in hardware.
<ID> ID
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<ErrorCode> Error code
bcm_port_dscp_map_set(Unit=<ID>,Port=<InterfaceNumber>) failed rv=<ErrorMessage>
Error
Failed to set a mapping for diffserv code points in hardware.
<ID> ID
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<ErrorMessage> Error message
bcm_vlan_control_port_set(Unit=<ID>, Port=<InterfaceNumber>) failed rv=<ErrorMessage>
December/2018 379
Message Collection
Error
FUJITSU PSWITCH
Failed to set the Vlan control type for a port in hardware.
<ID> ID
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<ErrorMessage> Error message
bcmx_vlan_control_vlan_set failed rv <ErrorCode>
Error
Failed to update the vlan control flag in USL database.
<ErrorCode> Error code
Call to hapiBroadApplyConfig failed
Error
Return fail in function hapiBroadApplyConfig.
Cannot get an interface number of the LAG; USP = <InterfaceNumber>
Error
Cannot get an interface number of LAG.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Couldn't add entry to IPMC port DB
Error
Couldn't add entry to USL database.
Couldn't add IPMC entry for index <SetValue>, rv <ErrorCode>
Error
Couldn't add IPMC entry to the multicast group for a port in hardware.
<SetValue> Set Value
<ErrorCode> Error code
Couldn't add L2 port <InterfaceNumber> to IPMC indices, rv =
<ErrorCode>
380 December/2018
FUJITSU PSWITCH
Error
Message Collection
Failed to add L2 port to IPMC indices. Return fail by function usl_bcmx_ipmc_add_l2_port_groups.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<ErrorCode>
0/1, 0/0/1
Error code
Couldn't add L3 port <InterfaceNumber> to IPMC index <ID>, rv =
<ErrorCode>
Error
Cannot add L3 port to IPMC group. Return fail by function usl_bcmx_ipmc_add_l3_port_groups.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<ID>
<ErrorCode>
0/1, 0/0/1
ID
Error code
Couldn't add L3 port <InterfaceNumber> to IPMC indices, rv =
<ErrorCode>
Error
Failed to add L3 port to IPMC indices. Return fail by function usl_bcmx_ipmc_add_l3_port_groups.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<ErrorCode> Error code
Couldn't add lport: <InterfaceNumber> in IPMC group, rv =
<ErrorCode>
Error
Cannot add lport to IPMC group. Return fail by function usl_bcmx_ipmc_add_l2_port_groups.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<ErrorCode>
0/1, 0/0/1
Error code
Couldn't add port <InterfaceNumber> to VLANs, rv = <ErrorCode>
December/2018 381
Message Collection
Error
FUJITSU PSWITCH
Failed to add a LAG port to the hardware VLAN membership.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<ErrorCode>
0/1, 0/0/1
Error code
Couldn't clear link failure state for port <InterfaceNumber> which has undergone LAG failover, rc = <ErrorCode> (<ErrorMessage>).
Error
Failed to clear the link failed bit for the port in case of LAG Failover
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<ErrorCode>
<ErrorMessage>
Error code
Error message
Couldn't configure Scheduling and BW configurations for lport
<InterfaceNumber>
Error
Failed to set a policy to a port. Return fail by function hapiBroadQosTcgSchedBWConfig.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Couldn't create the L3 intf <InterfaceNumber>, rv = <ErrorCode>
Error
Failed to create L3 interface. Return fail by function usl_bcmx_l3_intf_create.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<ErrorCode> Error code
Couldn't create trunk ID <ID>, rv = <ErrorCode>
382 December/2018
FUJITSU PSWITCH
Error
Failed to create a trunk in the driver.
<ID> ID
<ErrorCode> Error code
Message Collection
Couldn't delete L2 port <InterfaceNumber> from IPMC indices, rv
= <ErrorCode>
Error
Failed to delete L2 port to IPMC indices. Return fail by function usl_bcmx_ipmc_delete_l2_port_groups.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<ErrorCode>
0/1, 0/0/1
Error code
Couldn't delete L3 port <InterfaceNumber> from IPMC index <ID>, rv = <ErrorCode>
Error
Cannot delete L3 port from IPMC group. Return fail by function usl_bcmx_ipmc_delete_l3_port_groups.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<ID>
<ErrorCode>
0/1, 0/0/1
ID
Error code
Couldn't delete L3 port <InterfaceNumber> from IPMC indices, rv
= <ErrorCode>
Error
Failed to delete L3 port to IPMC indices. Return fail by function usl_bcmx_ipmc_delete_l3_port_groups.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<ErrorCode> Error code
Couldn't destroy trunk ID <ID>, rv = <ErrorCode>
December/2018 383
Message Collection
Error
Failed to delete trunk ID in hardware. Entry is not found.
<ID> ID
<ErrorCode> Error code
FUJITSU PSWITCH
Couldn't disable IPMC mode, rv = <ErrorCode>
Error
Failed to disanable IPMC mode. Return fail by function usl_bcmx_ipmc_enable.
<ErrorCode> Error code
Couldn't enable IPMC mode, rv = <ErrorCode>
Error
Failed to enable IPMC mode. Return fail by function usl_bcmx_ipmc_enable.
<ErrorCode> Error code
Couldn't find tenant entry(<ID>) in the database. rv=<ErrorCode>
Error
Failed to retrieve the entry to update tenant flood groups when changes occur on a LAG.
<ID> ID
<ErrorCode> Error code
Couldn't find unicast network port entry in the database. rv=<ErrorCode> (<ErrorMessage>)
Error
Couldn't find unicast network port entry in the USL database.
<ErrorCode> Error code
<ErrorMessage> Error message
Couldn't get switch hash control, rv = <ErrorCode>
(<ErrorMessage>)
384 December/2018
FUJITSU PSWITCH
Error
Failed to get switch hash control for trunk from hardware.
<ErrorCode> Error code
<ErrorMessage> Error message
Message Collection
Couldn't get switch hash control, rv = <ErrorCode>
(<ErrorMessage>), bcm unit = <ID>
Error
Failed to get switch hash control for trunk from hardware.
<ErrorCode> Error code
<ErrorMessage>
<ID>
Error message
ID
Couldn't get the egress port info for port <InterfaceNumber>, rv
= <ErrorCode>
Error
Failed to get egress port information. Return fail by function usl_bcmx_ipmc_egress_port_get
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<ErrorCode>
0/1, 0/0/1
Error code
Couldn't remove port <InterfaceNumber> from VLANs, rv =
<ErrorCode>
Error
Failed to remove a LAG port from the hardware VLAN membership.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<ErrorCode> Error code
Couldn't reset DSCP mapping for lport <InterfaceNumber>, rv =
<ErrorCode>
December/2018 385
Message Collection
Error
FUJITSU PSWITCH
Faild to reset DSCP mapping. Return fail by function usl_bcmx_port_dscp_map_set or usl_bcmx_port_dscp_map_mode_set.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<ErrorCode>
0/1, 0/0/1
Error code
Couldn't retrieve policy info
Error
Failed to get TCAM policy information.
Couldn't set discard mode for port <InterfaceNumber>, rv =
<ErrorCode>
Error
Failed to set discard mode for the port. Entry is not found in USL database table.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<ErrorCode> Error code
Couldn't set hash mode mode for trunk ID <ID>, rv = <ErrorCode>
Error
Failed to set hash mode for a LAG port in the driver.
<ID> ID
<ErrorCode> Error code
Couldn't set info for trunk ID <ID>, rv = <ErrorCode>
Error
Failed to set a property of trunk in the driver.
<ID> ID
<ErrorCode> Error code
Couldn't set ingress filter mode for port <InterfaceNumber>, rv
= <ErrorCode>
386 December/2018
FUJITSU PSWITCH
Error
Message Collection
Failed to set ingress filter mode for the port. Entry is not found in USL database table.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<ErrorCode>
0/1, 0/0/1
Error code
Couldn't set ingress filtering mode for port <InterfaceNumber>, rv = <ErrorCode>
Error
Failed to set ingress filter mode for the port. Entry is not found in USL database table.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<ErrorCode>
0/1, 0/0/1
Error code
Couldn't set learning mode for port <InterfaceNumber>, rv =
<ErrorCode>
Error
Failed to set learning mode for the port. Entry is not found in USL database table.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<ErrorCode> Error code
Couldn't set priority for port <InterfaceNumber>, rv = <ErrorCode>
Error
Failed to set port priority. Entry is not found in USL database table.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<ErrorCode> Error code
Couldn't set STP state for port <InterfaceNumber>, rv =
<ErrorCode>.
December/2018 387
Message Collection
Error
FUJITSU PSWITCH
Failed to set the stp state of the new ports to the states of the LAG.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<ErrorCode>
0/1, 0/0/1
Error code
Couldn't set switch hash contol, rv = <ErrorCode>
(<ErrorMessage>)
Error
Failed to set switch hash control for trunk to hardware.
<ErrorCode> Error code
<ErrorMessage> Error message
Couldn't set switch hash control, rv = <ErrorCode>
(<ErrorMessage>), bcm unit = <ID>
Error
Failed to set switch hash control for trunk to hardware.
<ErrorCode> Error code
<ErrorMessage> Error message
<ID> ID
Couldn't set the egress port info for port <InterfaceNumber>, rv
= <ErrorCode>
Error
Failed to set egress port information. Return fail by function usl_bcmx_ipmc_egress_port_set
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<ErrorCode> Error code
Couldn't set trunk info for ID <ID>, rv = <ErrorCode>
388 December/2018
FUJITSU PSWITCH
Error
Failed to set a property of trunk in the driver.
<ID> ID
<ErrorCode> Error code
Message Collection
Couldn't update tenant <ID> flood group <ID>. rv=<ErrorCode>
(<ErrorMessage>)
Error
Unable to update tenant flood groups when changes occur on a LAG.
<ID> ID
<ErrorCode>
<ErrorMessage>
Error code
Error message
Different stgId generated by unit <ID> for appId <ID>
Error
One of units got different spanning tree ID. All units should have generated same
ID.
<ID> ID
Different trunk-id generated by unit <ID> for Trunk appId <ID>
Error
One of units got different trunk ID. All units should have generated same ID.
<ID> ID
Driver Error, Openflow Platform constants not set
Error
Openflow init fail. Invalid or not supported chip ID.
ECMP table is empty
Error
No egress ID of an ECMP member to get from hardware.
Egress DAPI/HAPI pointers are NULL
December/2018 389
Message Collection
Error
Cannot get a valide port.
FUJITSU PSWITCH
Error adding route (<IPAddress> / <Mask>) VrfId(<ID>) to database, error code=<ErrorCode>
Error
Failed to add L3 route entry to USL database.
<IPAddress> ip_address, or, ipv6_address, or hostname
<Mask>
<ID>
<ErrorCode>
Mask value
ID
Error code
Error deleting the ARP/NDP of IP(<IPAddress>), VrfId(<ID>) from database, error code=<ErrorCode>
Error
Failed to delete L3 host entry from USL database.
<IPAddress> ip_address, or, ipv6_address, or hostname
<ID>
<ErrorCode>
ID
Error code
Error destroying L3 Egress ECMP object <id> in database, rv=<ErrorCode>
Error
Couldn't delete the egress ECMP object from USL database.
<id>
<ErrorCode> Error code
Error: Driver could not add Unit <ID> Port <InterfaceNumber> to
Multicast group (<MacAddress>/<VlanID>) as the port is not created
390 December/2018
FUJITSU PSWITCH
Error
Message Collection
The port is not created in driver.
<ID> ID
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<MacAddress>
<VlanID>
MAC address
VLAN ID
Failed to add lport <InterfaceNumber> to ipmc group <ID> encap <ID> for OpenFlow Fwd Rule num <Index>
Error
Failed to add a port to IPMC group. Return fail by function usl_bcmx_multicast_egress_add.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<ID>
<Index>
ID
Index
Failed to add lport <InterfaceNumber> to IPMC groups, hwRv
<ErrorCode> dbRv <ErrorCode>
Error
Failed to add a port in L2 bitmap for a number of groups.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<ErrorCode>
0/1, 0/0/1
Error code
Failed to add lport tunnel lport <InterfaceNumber> encap <ID> to
IPMC hwGroup <ID> rv <ErrorCode>
Error
Fail to add openflow lport tunnel. Return fail by function usl_bcmx_multicast_egress_add.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<ID>
<ErrorCode>
ID
Error code
Failed to add port <InterfaceNumber> to OpenFlow Fwd Rule num
<Index> redir list, invalid usp error.
December/2018 391
Message Collection
Error
FUJITSU PSWITCH
Invalid port number for hapiOF1Dot0RedirPortActionListUpdate.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<Index>
0/1, 0/0/1
Index
Failed to commit L3 Host Policy for Port <InterfaceNumber> and MAC
<MacAddress>
Error
Failed to commit L3 Host Policy to hardware.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<MacAddress> MAC address
Failed to configure ipmc address, hwRv <ErrorCode> dbRv
<ErrorCode>
Error
Failed to add a IP Mcast entry in both USL database and hardware.
<ErrorCode> Error code
Failed to create access port for tenant <ID>, hwRv <ErrorCode> dbRv
<ErrorCode>
Error
Failed to create access port for the tenant, neither hardware nor USL.
<ID> ID
<ErrorCode> Error code
Failed to create access port in hardware for tenant <ID> type <ID>
VLAN <ID> USP <InterfaceNumber> appPortId <ID>. status =
<ErrorCode>.
392 December/2018
FUJITSU PSWITCH
Error
Message Collection
Failed to create access port in hardware. Return fail by function hapiBroadL2oL3AccessPortInstall.
<ID> ID
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<ErrorCode> Error code
Failed to create non-unicast network port clone for tenant <ID>, hwRv <ErrorCode> (<ErrorMessage>) dbRv <ErrorCode>
Error
Failed to create a non-unicast network port clone, neither hardware nor USL.
<ID> ID
<ErrorCode>
<ErrorMessage>
Error code
Error message
Failed to create non-unicast network port for tenant <ID>, hwRv
<ErrorCode> dbRv <ErrorCode>
Error
Failed to create non-unicast network port for tenant, neither hardware nor USL.
<ID> ID
<ErrorCode> Error code
Failed to create tenant <ID>, hwRv <ErrorCode> dbRv <ErrorCode>
Error
Failed to create the tenant, neither hardware nor USL.
<ID> ID
<ErrorCode> Error code
Failed to create uc nw port for tenant <ID>, hwRv <ErrorCode> dbRv
<ErrorCode>
December/2018 393
Message Collection
Error
FUJITSU PSWITCH
Failed to create unicast network port for tenant in hardware or USL database.
<ID> ID
<ErrorCode> Error code
Failed to create unicast network port clone for tenant <ID>, hwRv
<ErrorCode> dbRv <ErrorCode>
Error
Failed to create unicast network port for tenant, neither hardware nor USL.
<ID> ID
<ErrorCode> Error code
Failed to create VRID interface for vlan <ID>, rv <ErrorCode>
Error
Failed to create VRID on a L3 interface. Return fail by function usl_bcmx_l3_intf_create.
<ID> ID
<ErrorCode> Error code
Failed to delete access port. appPortId <ID>, hwRv <ErrorCode> dbRv <ErrorCode>
Error
Failed to delete access port, neither hardware nor USL.
<ID> ID
<ErrorCode> Error code
Failed to delete ipmc address, hwRv <ErrorCode> dbRv <ErrorCode>
Error
Failed to delete a IP Mcast entry in both USL database and hardware.
<ErrorCode> Error code
Failed to delete ipmc group <ID> index <Index>, hw error code
<ErrorCode> db error code <ErrorCode>.
394 December/2018
FUJITSU PSWITCH
Error
Message Collection
Failed to delete ipmc group. Return fail by function usl_bcmx_multicast_destroy.
<ID> ID
<Index>
<ErrorCode>
Index
Error code
Failed to delete IPv6 link-local route, error code <ErrorCode>
Error
Failed to delete IPv6 link local route. Return fail by function usl_bcmx_l3_route_delete.
<ErrorCode> Error code
Failed to delete lport <InterfaceNumber> fro ipmc group <Index> encap <ID> for OpenFlow Fwd Rule num <ID>
Error
Failed to delete a port from IPMC group. Return fail by function usl_bcmx_multicast_egress_delete.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<Index>
<ID>
0/1, 0/0/1
Index
ID
Failed to delete lport <InterfaceNumber> from IPMC groups, hwRv
<ErrorCode> dbRv <ErrorCode>
Error
Failed to delete a port in L2 bitmap for a number of groups.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<ErrorCode>
0/1, 0/0/1
Error code
Failed to delete multipath/ECMP egress next hop object <ID> from hardware
December/2018 395
Message Collection
Error
FUJITSU PSWITCH
Failed to delete a multipath/ECMP egress next hop object from USL database or hardware.
<ID> ID
Failed to delete non-unicast network port clone, hwRv <ErrorCode> dbRv <ErrorCode>
Error
Failed to delete non-unicast network port clone, neither hardware nor USL.
<ErrorCode> Error code
Failed to delete non-unicast network port, hwRv <ErrorCode> dbRv
<ErrorCode>
Error
Failed to delete non-unicast network port for tenant, neither hardware nor USL.
<ErrorCode> Error code
Failed to delete tenant <ID>, hwRv <ErrorCode> dbRv <ErrorCode>
Error
Failed to delete the tenant, neither hardware nor USL.
<ID> ID
<ErrorCode> Error code
Failed to delete unicast network port clone hwRv <ErrorCode> dbRv
<ErrorCode>
Error
Failed to delete unicast network port for tenant, neither hardware nor USL.
<ErrorCode> Error code
Failed to delete unicast network port, hwRv <ErrorCode> dbRv
<ErrorCode>
396 December/2018
FUJITSU PSWITCH
Error
Message Collection
Failed to delete unicast network port for tenant from hardware or USL database.
<ErrorCode> Error code
Failed to enable IPMC replication sharing mode, error code
<ErrorCode>
Error
Failed to enable IPMC replication sharing mode in hardware.
<ErrorCode> Error code
Failed to get an L3 ECMP egress id for destination interface <ID>
Error
Failed to get an L3 ECMP egress ID. Return fail by hapiBroadL2ECMPEgressIdGet.
<ID> ID
Failed to get interface number; USP = <InterfaceNumber>
Error
Tried to get interface number from NIM module but Unit/Slot/Port is unknown.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to get interface type for <InterfaceNumber>
Error
Unknown interface number.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to get modid/modport for lport <InterfaceNumber>: modid
<ID> modport <InterfaceNumber>
December/2018 397
Message Collection
Error
FUJITSU PSWITCH
Failed to get module ID and port for certain logical port.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<ID>
0/1, 0/0/1
ID
Failed to get modid/port for lport <InterfaceNumber>: modid <ID> modport <InterfaceNumber>
Error
Failed to get module ID and port for certain logical port.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<ID> ID
Failed to get RPC request buffer
Error
Failed to allocate a block of memory. Out of resources.
Failed to get RPC response buffer
Error
Unable to get a buffer to send RPC response message.
Failed to install IPv6 link-local route, error code <ErrorCode>
Error
Failed to add IPv6 link local route. Return fail by function usl_bcmx_l3_route_add.
<ErrorCode> Error code
Failed to modify access port for tenant <ID>, hwRv <ErrorCode> dbRv
<ErrorCode>
Error
Failed to modify access port for the tenant, neither hardware nor USL.
<ID> ID
<ErrorCode> Error code
Failed to open file <FileName> to write drivshell output
398 December/2018
FUJITSU PSWITCH
Error
Failed to open a file.
<FileName> Log is created by this file.
Message Collection
Failed to receive message on queue <ID>
Error
Failed to read a message from message queue.
<ID> ID
Failed to remove access port for hardware for tenant <ID> type
<ID> VLAN <ID> USP <InterfaceNumber> appPortId <ID>. status =
<ErrorCode>.
Error
Faild to remove access port for hardware. Return fail by function hapiBroadL2oL3AccessPortPartialDbCreate.
<ID> ID
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<ErrorCode>
0/1, 0/0/1
Error code
Failed to remove lport <InterfaceNumber> from IPMC groups, hwRv
<ErrorCode> dbRv <ErrorCode>
Error
Failed to remove a port in L2 bitmap for a number of groups.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<ErrorCode> Error code
Failed to remove lport tunnel lport <InterfaceNumber> encap <ID> from IPMC hwGroup <ID> rv <ErrorCode>
December/2018 399
Message Collection
Error
FUJITSU PSWITCH
Fail to remove openflow lport tunnel. Return fail by function usl_bcmx_multicast_egress_delete.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<ID>
<ErrorCode>
0/1, 0/0/1
ID
Error code
Failed to send port db update msg to unit <ID>
Error
Failed to send the portdb update message to remote units.
<ID> ID
Failed to set IPMC mode, hwRv <ErrorCode> dbRv <ErrorCode>
Error
Failed to enable/disable IPMC in both USL database and hardware.
<ErrorCode> Error code
Failed to set L2 ports for IPMC group, hwRv <ErrorCode> dbRv
<ErrorCode>
Error
Failed to set L2 ports for a IPMC group in both USL database and hardware.
<ErrorCode> Error code
Failed to set lport <InterfaceNumber> to IPMC groups, hwRv
<ErrorCode> dbRv <ErrorCode>
Error
Failed to set a port in L2 bitmap for a number of groups.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<ErrorCode>
0/1, 0/0/1
Error code
Failed to set port <InterfaceNumber> state to disable rv
<ErrorCode>
400 December/2018
FUJITSU PSWITCH
Error
Message Collection
Failed to disable STP in a port.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<ErrorCode>
0/1, 0/0/1
Error code
Failed to set port <InterfaceNumber> vlan priority mapping rv
<ErrorCode>
Error
Failed to set vlan priority mapping in a port.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<ErrorCode> Error code
Failed to set switch VXLAN UDP Destination port <InterfaceNumber>, hwRv <ErrorCode> dbRv <ErrorCode>
Error
Failed to set VXLAN UDP destination port of the network port in USL database or hardware.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<ErrorCode> Error code
Failed to set the RTAG7 ECMP field offsets <ErrorCode>
Error
Failed to set RTAG7 hash mode in ECMP.
<ErrorCode> Error code
Failed to set the RTAG7 trunk field offsets <ErrorCode>
Error
Failed to set RTAG7 hash mode in trunk.
<ErrorCode> Error code
Failed to set untag for usp <InterfaceNumber>, invalid usp error.
December/2018 401
Message Collection
Error
FUJITSU PSWITCH
Invalid port number for hapiBroadOpenFlowPortVlanUntagSet.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to set vxlan UDP dst port <InterfaceNumber> on network port
<IPPortNumber> at USL. hwRv <ErrorCode> dbRv <ErrorCode>
Error
Failed to modify VXLAN UDP destination port of the network port in USL database or hardware.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<IPPortNumber>
<ErrorCode>
0/1, 0/0/1
UDP or TCP port number, ex:8000, 21
Error code
Failed to update non-unicast network port clone rv <ErrorCode>
Error
Failed to update a non-unicast network port clone. The entry is probably not found or hardware problem.
<ErrorCode> Error code
Failed to update port_tgid, hwRv <ErrorCode> dbRv <ErrorCode>
Error
Failed to update a IP Mcast entry in both USL database and hardware.
<ErrorCode> Error code
HAPI LPORT: Could not get port config rv=<ErrorMessage>
Error
Failed to get configuration from hardware.
<ErrorMessage> Error message
HAPI LPORT: unit <ID> exists
402 December/2018
FUJITSU PSWITCH
Error
Find out a exist unit by function hapiBroadDeviceAttach.
<ID> ID
Message Collection
HAPI tx_lplist: Failed on unit <ID> port <InterfaceNumber>:
<ErrorMessage>
Error
Return fail by function hapiBroadTxUc.
<ID> ID
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<ErrorMessage>
0/1, 0/0/1
Error message
HAPI tx_lplist: Failed on unit <ID>:<ErrorMessage>
Error
Return fail by function bcm_tx.
<ID> ID
<ErrorMessage> Error message
hapiLagPortPtr is NULL
Error
Cannot get a valid LAG pointer.
hapiPortPtr is NULL
Error
Cannot get a valid port pointer.
In <FunctionName>: #2 Failed bcm_multicast_destroy <ErrorCode>
Error
Failed to destroy multicast group in hardware again after retry.
<FunctionName> Log is created by this function.
<ErrorCode> Error code
In <FunctionName>: Failed #2 in bcm_ipmc_add <ErrorCode>
December/2018 403
Message Collection
Error
Couldn't add IPMC L3 entry to new multicast group.
<FunctionName> Log is created by this function.
<ErrorCode> Error code
FUJITSU PSWITCH
In <FunctionName>: Failed bcm_ipmc_remove <ErrorCode>
Error
Failed to remove IPMC L3 entries from the multicast group.
<FunctionName> Log is created by this function.
<ErrorCode> Error code
In <FunctionName>: Failed in bcm_ipmc_add <ErrorCode>
Error
Couldn't add IPMC L3 entry to new multicast group.
<FunctionName> Log is created by this function.
<ErrorCode> Error code
In <FunctionName>: Failed in retry of bcm_multicast_create
<ErrorCode>
Error
Failed to create the multicast group in hardware again.
<FunctionName> Log is created by this function.
<ErrorCode> Error code
In <FunctionName>: Failed in usl_db_ipmc_port_tgid_set
<ErrorCode>
Error
Failed to update port_tgid for a multicast group in USL database.
<FunctionName> Log is created by this function.
<ErrorCode> Error code
Input gport validation failed with error <ErrorMessage>
404 December/2018
FUJITSU PSWITCH
Error
Message Collection
Invalid port number. Return fail by _bcm_esw_port_gport_validate.
<ErrorMessage> Error message
Invalid bcmunit <ID> bcmport <Index>, cannot convert to gport
Error
Either localBcmUnit or bcmPort is out of range.
<ID> ID
<Index> Index
Invalid ethertype <TypeValue>; ethertype must be greater than or equal to 0x0600 and less than or equal to 0xffff
Error
Invalid ethernet type for hapiBroadHashDestGet.
<TypeValue> Type Value
Invalid policy (<ID>), valid range is [0 .. <MaxValue>)
Error
Failed to get TCAM policy information. Invalid policy ID.
<ID> ID
<MaxValue> Maximum value
Invalid protocol <ID>. Only valid values are 6 (TCP) and 17 (UDP).
Error
Invalid protocol ID for hapiBroadHashDestGet.
<ID> ID
Invalid protocol <ID>; protocol must be greater than or equal to
0 and less than or equal to 0xff
Error
Invalid protocol ID for hapiBroadHashDestGet.
<ID> ID
Invalid trunk identity <ID> for the LAG id <ID>
December/2018 405
Message Collection
Error
Get a invalid trunk ID.
<ID> ID
FUJITSU PSWITCH
Invalid tunnel type (<ID>) for tenant <ID>
Error
Only NVGRE and VXLAN channel are supported.
<ID> ID
Invalid user port returned for hash destination gport
<InterfaceNumber>, interface <InterfaceNumber>
Error
Get a invalid port number by bcm_switch_pkt_info_hash_get.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Invalid VLAN <ID> specified for hash destination; VLAN must be greater than or equal to <MinValue> and less than or equal to
<MaxValue>
Error
Invalid VLAN ID for hapiBroadHashDestGet.
<ID> ID
<MinValue>
<MaxValue>
Minimum value
Maximum value
L2 Multicast AVL DB is corrupt.
Error
An entry should exist but not found in AVL database.
Lag async done message send failed on Driver Lag queue
<MemoryAddress>
Error
Failed to send a Lag Async done message to driver lag queue.
<MemoryAddress> Memory address
lagHapiPortPtr is NULL
406 December/2018
FUJITSU PSWITCH
Error
Cannot get a valide LAG.
Message Collection
Mismatch between IPMC DB and Port DB, modid <ID>, port <Index>, ipmcIndex <Index>.
Error
The IPMC entry at ipmcIndex in USL database does not exist.
<ID> ID
<Index> Index
Msg size <SizeValue> is greater than RPC buffer size <SizeValue>
Error
Couldn't send RPC message delete a IP multicast entry because message size is too big.
<SizeValue> An integer for a specific range or a limit value.
Network Port egress ECMP object creation failed for tenant <ID>
Error
Failed to create a multipath/ECMP egress next hop object in USL database or hardware.
<ID> ID
Network Port egress ECMP object replace failed for tenant <ID>
Error
Failed to replace a multipath/ECMP egress next hop object in USL database or hardware.
<ID> ID
NULL pointer for IPMC index <Index>
Error
One of group in USL database is NULL. Database might be corrupted.
<Index> Index
OF1.3 Fwd Rule num <ID> install failed, database insert failure.
December/2018 407
Message Collection
Error
Failed to add openflow 1.3 rule. Database insert failure.
<ID> ID
FUJITSU PSWITCH
OF1.3 Rule num <ID> install failed, Actions Conflict.
Error
Failed to add openflow 1.3 rule. The action confilict.
<ID> ID
OF1.3 Rule num <ID> install failed, policy manager apply error
Error
Failed to add openflow 1.3 rule. Return fail by policy apply function.
<ID> ID
OF1.3 Rule num <ID> install failed, policy manager commit error
<ErrorCode>.
Error
Failed to add openflow 1.3 rule. Return fail by function hapiBroadPolicyCommit.
<ID> ID
<ErrorCode> Error code
OF1.3 Rule num <ID> install failed, policy manager rule prepration error.
Error
Failed to add openflow 1.3 rule.
<ID> ID
OF1.3 Rule num <ID> install failed, rule already exists in database.
Error
Failed to add openflow 1.3 rule. The rule already exists in database.
<ID> ID
OF1.3 Rule num <ID> Update failed, Actions Conflict.
408 December/2018
FUJITSU PSWITCH
Error
Failed to update openflow 1.3 rule. Action confilict.
<ID> ID
Message Collection
OpenFlow 1.0 Rule num <ID> install failed, Actions Conflict.
Error
Failed to add openflow 1.0 rule. Return fail by function hapiOFActionConflictResolution.
<ID> ID
OpenFlow 1.0 Rule num <ID> install failed, match port
<InterfaceNumber> is invalid.
Error
Invalid port number for hapiBroadOpenFlow1Dot0RuleAdd.
<ID> ID
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
OpenFlow 1.0 Rule num <ID> install failed, policy manager apply error
Error
Failed to add openflow 1.0 rule. Return fail by policy apply function.
<ID> ID
OpenFlow 1.0 Rule num <ID> install failed, policy manager commit error <ErrorCode>.
Error
Failed to add openflow 1.0 rule. Return fail by function hapiBroadPolicyCommit.
<ID> ID
<ErrorCode> Error code
OpenFlow 1.0 Rule num <ID> install failed, policy manager rule prepration error.
December/2018 409
Message Collection
Error
Failed to add openflow 1.0 rule.
<ID> ID
FUJITSU PSWITCH
OpenFlow 1.0 Rule num <ID> install failed, rule already exists in database.
Error
Failed to add openflow 1.0 rule. The rule already exists in database.
<ID> ID
OpenFlow 1.0 Rule num <ID> Update failed, Actions Conflict.
Error
Failed to update openflow 1.0 rule. The action conflict.
<ID> ID
OpenFlow Access Rule num <ID> install failed, database insert failure.
Error
Openflow access rule add fail, database insert failure.
<ID> ID
OpenFlow Access Rule num <ID> install failed, match port
<InterfaceNumber> is invalid.
Error
Invalid input port for function hapiBroadOpenFlowAccessRuleAdd.
<ID> ID
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
OpenFlow Access Rule num <ID> install failed, policy manager apply error.
410 December/2018
FUJITSU PSWITCH
Error
Failed to apply a policy to interface. Return fail by function hapiBroadOpenflowApplyPolicy.
<ID> ID
Message Collection
OpenFlow Access Rule num <ID> install failed, policy manager commit error.
Error
Failed to apply a policy to hardware. Return fail by function hapiBroadPolicyCommit.
<ID> ID
OpenFlow Access Rule num <ID> install failed, policy manager rule prepration error.
Error
Failed to add a policy rule. Return fail by function hapiBroadPolicyRuleActionAdd.
<ID> ID
OpenFlow Access Rule num <ID> install failed, rule already exists in database.
Error
Openflow access rule add fail, rule already exists in database.
<ID> ID
OpenFlow Fwd Rule num <ID> install failed, database insert failure.
Error
Failed to add openflow 1.0 rule. The database insert failure.
<ID> ID
OpenFlow Fwd Rule num <ID> install failed, Ipmc group allocation failed.
December/2018 411
Message Collection
Error
FUJITSU PSWITCH
Failed to add openflow redirect port list action. Return fail by function hapiBroadOpenFlowIpmcGroupIndexAllocate.
<ID> ID
OpenFlow Fwd Rule num <ID> install failed, Ipmc group creation failed.
Error
Failed to add openflow redirect port list action. Return fail by function usl_bcmx_multicast_create.
<ID> ID
OpenFlow Fwd Rule num <ID> install failed, match port
<InterfaceNumber> is invalid.
Error
Fail to install openflow forward rule. Return fail by function hapiBroadOpenFlowIpmcGroupIndexAllocate.
<ID> ID
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
OpenFlow Fwd Rule num <ID> install failed, policy manager apply error.
Error
Fail to install openflow forward rule. Return fail by Policy apply function.
<ID> ID
OpenFlow Fwd Rule num <ID> install failed, policy manager commit error.
Error
Fail to install openflow forward rule. Return fail by function hapiBroadPolicyCommit.
<ID> ID
OpenFlow Fwd Rule num <ID> install failed, policy manager rule prepration error.
412 December/2018
FUJITSU PSWITCH
Error
Fail to install openflow forward rule.
<ID> ID
Message Collection
OpenFlow Fwd Rule num <ID> install failed, redir port
<InterfaceNumber> is invalid.
Error
Invalid port number for hapiOF1Dot0SingleRedirRuleAdd.
<ID> ID
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
OpenFlow Fwd Rule num <ID> install failed, rule already exists in database.
Error
Fail to install openflow forward rule. The rule already exists in database.
<ID> ID
osapiSemGive failed on openflow sema <MemoryAddress>
Error
Failed to give semaphore in openflow module.
<MemoryAddress> Memory address
osapiSemTake failed on openflow sema <MemoryAddress>
Error
Failed to take semaphore in openflow module.
<MemoryAddress> Memory address
tcam API <ErrorCode> policy creation failed, policy manager commit error.
Error
Failed to add a TCAM policy to hardware. Return fail by function hapiBroadPolicyCommit.
<ErrorCode> Error code
TCAM API actions specified not consistent
December/2018 413
Message Collection
Error
FUJITSU PSWITCH
Failed to check TCAM action. The actions specified not consistent.
TCAM API not initialized
Error
Failed to change TCAM policy. TCAM API not initialized.
TCAM API policy creation failed rule prepration error.
Error
Failed to add a TCAM policy to hardware. The rule prepration error.
Too many interfaces added to L2MC index <Index>, ignoring some interfaces.
Error
Too many interfaces added to the L2MC Address
<Index> Index
Traffic Class Group:<ID> is not supported
Error
Failed to map an COS Queue to one of the port's available traffic class groups.
Invalide traffic class group.
<ID> ID
Traffic Class:<ID> is not supported
Error
Failed to map an COS Queue to one of the port's available traffic class groups.
Invalide traffic class ID.
<ID> ID
Trunk id <ID> is out of the rang of <MinValue> - <MaxValue>
414 December/2018
FUJITSU PSWITCH
Error
Get a invalid trunk ID.
<ID>
<MinValue>
<MaxValue>
ID
Minimum value
Maximum value
Message Collection
Unable to add entry <MacAddress> into L2 table : <ErrorCode>
Error
Hardware returned other error while adding MAC entry.
<MacAddress> MAC address
<ErrorCode> Error code
Unable to find a hardware egress object id with error <ErrorCode>
Error
Failed to get a hardware egress object ID. Return fail by hapiBroadL3HwEgrIdGet.
<ErrorCode> Error code
Unable to find a hash destination with error <ErrorCode>
Error
Unable to find a hash destination. Return fail by bcm_switch_pkt_info_hash_get.
<ErrorCode> Error code
Unable to find a port member of vlan <ID>
Error
Cannot get port member by VLAN.
<ID> ID
Unable to get egress physical port with error <ErrorCode>
Error
Unable to get egress physical port. Return fail by bcm_switch_pkt_info_hash_get.
<ErrorCode> Error code
Unable to get trunk info with error <ErrorCode>
December/2018 415
Message Collection
Error
FUJITSU PSWITCH
Failed to get trunk information. Return fail by bcm_trunk_chip_info_get.
<ErrorCode> Error code
Unable to obtain h/w ECMP ID for ECMP egress ID <ID>.
Error
Failed to delte ECMP entry. Return fail by function usl_db_l3_egress_ecmp_hw_id_get.
<ID> ID
Unicast network port modify failed for tenant <ID>
Error
Failed to motify unicast network port for tenant in hardware or USL database.
<ID> ID
USL : Failed to ack portdb update message from unit <ID>
Error
Failed to send the portdb update message to remote units.
<ID> ID
USL returned <ErrorCode> while <Command> <MacAddress> vid <ID>.
Error
Except adding an existed entry, USL database has return other error messages during adding/motifying entries.
<ErrorCode> Error code
<Command> Command
<MacAddress>
<ID>
MAC address
ID
USL returned <ErrorCode> while deleting <MacAddress> vid <ID> from
HW.
416 December/2018
FUJITSU PSWITCH
Error
Message Collection
Except entry not found, USL database has return other error messages.
<ErrorCode> Error code
<MacAddress>
<ID>
MAC address
ID
USL worker task received unrecognized message <TypeValue>
Error
USL worker task received unrecognized message from the queue.
<TypeValue> Type Value
USL: Couldn't delete egress object <ID> from Hw, rv=<ErrorCode>
Error
Couldn't delete the egress object from hardware.
<ID> ID
<ErrorCode> Error code
USL: Error adding ARP/NDP entry of IP(<IPAddress>), VrfId(<ID>) to database, rv=<ErrorCode>
Error
Failed to add L3 host entry to USL database.
<IPAddress> ip_address, or, ipv6_address, or hostname
<ID>
<ErrorCode>
ID
Error code
USL: error configuring ip vlan entry, hwRv <ErrorCode> dbRv
<ErrorCode>
Error
Failed to add the entry to the IP subnet VLAN table in both USL database and hardware.
<ErrorCode> Error code
USL: error configuring l2 age time to <SetValue>, rv <ErrorCode>
December/2018 417
Message Collection
Error
Failed to set aging time in USL database.
<SetValue> Set Value
<ErrorCode> Error code
FUJITSU PSWITCH
USL: error configuring mac vlan entry, hwRv <ErrorCode> dbRv
<ErrorCode>
Error
Failed to add the entry to the MAC VLAN table in both USL database and hardware.
<ErrorCode> Error code
USL: error deleting L3 Egress object <ID> from Db, rc=<ErrorCode>
Error
Couldn't delete the egress object from USL database.
<ID> ID
<ErrorCode> Error code
USL: error deleting mac vlan entry, hwRv <ErrorCode> dbRv
<ErrorCode>
Error
Failed to delete the entry from the MAC VLAN table in both USL database and hardware.
<ErrorCode> Error code
USL: error leaving port to l2 mcast addresses, hwRv <ErrorCode> dbRv <ErrorCode>
Error
Failed to remove a port from a list of L2 Multicast addresses in both USL database and hardware.
<ErrorCode> Error code
USL: error leaving ports to l2 mcast address, hwRv <ErrorCode> dbRv
<ErrorCode>
418 December/2018
FUJITSU PSWITCH
Error
Message Collection
Failed to remove ports from a L2 Multicast address in both USL database and hardware.
<ErrorCode> Error code
USL: error removing ip vlan entry, hwRv <ErrorCode> dbRv
<ErrorCode>
Error
Failed to delete the entry from the IP subnet VLAN table in both USL database and hardware.
<ErrorCode> Error code
USL: Failed to <Command> blocking on vlan <ID>, hwRv <ErrorCode> dbRv <ErrorCode>
Error
Failed to enabling/disabling blocking on VLAN in both USL database and hardware.
<Command> Command
<ID>
<ErrorCode>
ID
Error code
USL: Failed to <Command> port <InterfaceNumber> to vlan <ID>, hwRv
<ErrorCode> dbRv <ErrorCode>
Error
Failed to adding/removing a port from the block list of a VLAN in both USL database and hardware.
<Command> Command
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<ID>
<ErrorCode>
0/1, 0/0/1
ID
Error code
USL: Failed to add multicast address, hwRv <ErrorCode> dbRv
<ErrorCode>
December/2018 419
Message Collection
Error
FUJITSU PSWITCH
Failed to add L2 Multicast MAC entry to both USL database and hardware.
<ErrorCode> Error code
USL: Failed to add port to L2MC entries, hwRv <ErrorCode> dbRv
<ErrorCode>
Error
Failed to add a port to a list of L2 Multicast addresses in both USL database and hardware.
<ErrorCode> Error code
USL: Failed to add ports to mac (<MacAddress>) vid <ID>, hwRv
<ErrorCode> dbRv <ErrorCode>
Error
Failed to add ports to a L2 Multicast address in both USL database and hardware.
<MacAddress> MAC address
<ID> ID
<ErrorCode> Error code
USL: Failed to add trill AVF, hwRv <ErrorCode> dbRv <ErrorCode>
Error
Failed to add TRILL Appointed VLAN Forwarder to both RPC and hardware.
<ErrorCode> Error code
USL: Failed to add trill mcast , hwRv <ErrorCode> dbRv <ErrorCode>
Error
Failed to add TRILL multicast to both RPC and hardware.
<ErrorCode> Error code
USL: Failed to add trill rbridge , hwRv <ErrorCode> dbRv
<ErrorCode>
Error
Failed to add TRILL bridge to both RPC and hardware.
<ErrorCode> Error code
USL: Failed to add trill rpf , hwRv <ErrorCode> dbRv <ErrorCode>
420 December/2018
FUJITSU PSWITCH
Error
Message Collection
Failed to add TRILL Reverse Path Forwarding to both RPC and hardware.
<ErrorCode> Error code
USL: Failed to add vlan <ID> to stg <ID>, hwRv <ErrorCode> dbRv
<ErrorCode>
Error
Failed to add a VLAN to a Spanning Tree group in both USL database and hardware.
<ID> ID
<ErrorCode> Error code
USL: Failed to create stg <ID>/<MemoryAddress>, hwRv <ErrorCode> dbRv <ErrorCode>
Error
Failed to create a Spanning Tree group in both USL database and hardware.
<ID> ID
<MemoryAddress>
<ErrorCode>
Memory address
Error code
USL: Failed to create trill mcast group , hwRv <ErrorCode> dbRv
<ErrorCode>
Error
Failed to add TRILL multicast group to both RPC and hardware.
<ErrorCode> Error code
USL: Failed to delete stg <ID>, hwRv <ErrorCode> dbRv <ErrorCode>
Error
Failed to delete a Spanning Tree group from both USL database and hardware.
<ID> ID
<ErrorCode> Error code
USL: Failed to delete trill AVF, hwRv <ErrorCode> dbRv <ErrorCode>
December/2018 421
Message Collection
Error
FUJITSU PSWITCH
Failed to delete TRILL Appointed VLAN Forwarder from both RPC and hardware.
<ErrorCode> Error code
USL: Failed to delete trill mcast , hwRv <ErrorCode> dbRv
<ErrorCode>
Error
Failed to delete TRILL multicast from both RPC and hardware.
<ErrorCode> Error code
USL: Failed to delete trill mcast group , hwRv <ErrorCode> dbRv
<ErrorCode>
Error
Failed to add TRILL multicast group to both RPC and hardware.
<ErrorCode> Error code
USL: Failed to delete trill rbridge , hwRv <ErrorCode> dbRv
<ErrorCode>
Error
Failed to add TRILL bridge to both RPC and hardware.
<ErrorCode> Error code
USL: Failed to delete trill rpf , hwRv <ErrorCode> dbRv <ErrorCode>
Error
Failed to add TRILL bridge to both Reverse Path Forwarding and hardware.
<ErrorCode> Error code
USL: Failed to initialize trill , hwRv <ErrorCode>
Error
Failed to initialize USL for TRILL in driver.
<ErrorCode> Error code
USL: Failed to remove multicast address, hwRv <ErrorCode> dbRv
<ErrorCode>
422 December/2018
FUJITSU PSWITCH
Error
Message Collection
Failed to remove L2 Multicast MAC entry from both USL database and hardware.
<ErrorCode> Error code
USL: Failed to remove vlan <ID> from stg <ID>, hwRv <ErrorCode> dbRv <ErrorCode>
Error
Failed to remove a VLAN from a Spanning Tree group in both USL database and hardware.
<ID> ID
<ErrorCode> Error code
USL: Failed to set ports for mac (<MacAddress>) vid <ID>, hwRv
<ErrorCode> dbRv <ErrorCode>
Error
Failed to set ports for a L2 Multicast address in both USL database and hardware.
<MacAddress> MAC address
<ID>
<ErrorCode>
ID
Error code
USL: Failed to update trill rbridge , hwRv <ErrorCode> dbRv
<ErrorCode>
Error
Failed to update TRILL bridge in both RPC and hardware.
<ErrorCode> Error code
USL: Failed to update trill rpf , hwRv <ErrorCode> dbRv <ErrorCode>
Error
Failed to add TRILL bridge to both Reverse Path Forwarding and hardware.
<ErrorCode> Error code
usl_db_ipmc_egress_port_set() returned <ErrorCode>
December/2018 423
Message Collection
Error
FUJITSU PSWITCH
Failed to sets the IPMC egress config for a port in USL database.
<ErrorCode> Error code
usp conversion for redirect intIfNum <InterfaceNumber> failed.
Error
Failed to translate interface number to unit/slot/port.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
usp conversion for redirect intIfNum failed.
Error
Failed to translate interface number to unit/slot/port.
Wrong link aggregation type <TypeValue>
Error
Invalid aggregation type.
<TypeValue> Type Value
Couldn't set CosQueue(TC) to TCG mapping for lport
<InterfaceNumber>, rv = <ErrorCode>
Error/Debug
Failed to set a policy to a port. Return fail by function usl_bcmx_port_tc_to_tcg_map_set.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<ErrorCode>
0/1, 0/0/1
Error code
Couldn't set TGID for IPMC index <Index>, rv = <ErrorCode>
Error/Debug
Failed to set TGID for IPMC. Return fail by function usl_bcmx_ipmc_port_tgid_set.
<Index> Index
<ErrorCode> Error code
(<FileName>: <FileLineNumber>) <Command>
424 December/2018
FUJITSU PSWITCH
Informational
Message Collection
Display the log buffer because message is longer than the event log buffer.
<FileName> Log is created by this file.
<FileLineNumber>
<Command>
Log is created by this line.
Command
<FileName> <FileLineNumber>: FIP snooping failed to create vlan notify policy in vlan <ID>
Informational
Failed to create VLAN notify policy. Return fail by function hapiBroadFcfVlanNotifyPolicyCreate.
<FileName> Log is created by this file.
<FileLineNumber> Log is created by this line.
<ID> ID
<FileName> <FileLineNumber>: FIP snooping to apply vlan notify policy in vlan <ID>
Informational
Failed to set Fip Snooping interface policy. Return fail by function hapiBroadFipSnoopIntfPolicyConfig.
<FileName> Log is created by this file.
<FileLineNumber> Log is created by this line.
<ID> ID
<FileName> <FileLineNumber>: In <FunctionName> Couldn't add FCF
MAC address to VLAN <ID>
Informational
Cannot add FCF MAC address. Return fail by function hapiBroadFipSnoopMacAddrAdd.
<FileName> Log is created by this file.
<FileLineNumber> Log is created by this line.
<FunctionName>
<ID>
Log is created by this function.
ID
<FileName> <FileLineNumber>: In <FunctionName> Couldn't add one or more MAC addresses to VLAN
December/2018 425
Message Collection
Informational
Failed to add an L2FDB entry for the MAC/VLAN pair.
<FileName> Log is created by this file.
<FileLineNumber>
<FunctionName>
Log is created by this line.
Log is created by this function.
FUJITSU PSWITCH
<FileName> <FileLineNumber>: In <FunctionName> Couldn't allocate group ID
Informational
There were no unused bits in a group ID mask.
<FileName> Log is created by this file.
<FileLineNumber> Log is created by this line.
<FunctionName> Log is created by this function.
<FileName> <FileLineNumber>: In <FunctionName> Couldn't apply policy to interface
Informational
Failed to apply policy to interface in hardware.
<FileName> Log is created by this file.
<FileLineNumber>
<FunctionName>
Log is created by this line.
Log is created by this function.
<FileName> <FileLineNumber>: In <FunctionName> Couldn't commit policy
Informational
Failed to commit policy to hardware.
<FileName> Log is created by this file.
<FileLineNumber> Log is created by this line.
<FunctionName> Log is created by this function.
<FileName> <FileLineNumber>: In <FunctionName> Couldn't Create dot1x policy
426 December/2018
FUJITSU PSWITCH
Informational
Message Collection
Failure if this port has an ACL, or non-client specific Diffserv policy already applied, lack of resource, etc.
<FileName> Log is created by this file.
<FileLineNumber>
<FunctionName>
Log is created by this line.
Log is created by this function.
<FileName> <FileLineNumber>: In <FunctionName> Couldn't create
VLAN assignment policy
Informational
Failed to add the MAC/VLAN entry to USL database table.
<FileName> Log is created by this file.
<FileLineNumber> Log is created by this line.
<FunctionName> Log is created by this function.
<FileName> <FileLineNumber>: In <FunctionName> Couldn't delete dot1x DiffServ policy
Informational
The entry is not found. There is no entry to be deleted.
<FileName> Log is created by this file.
<FileLineNumber> Log is created by this line.
<FunctionName> Log is created by this function.
<FileName> <FileLineNumber>: In <FunctionName> Couldn't delete dot1x VLAN assignment policy
Informational
The entry is not found. There is no entry to be deleted.
<FileName> Log is created by this file.
<FileLineNumber>
<FunctionName>
Log is created by this line.
Log is created by this function.
<FileName> <FileLineNumber>: In <FunctionName> Couldn't Delete
FCF MAC address
December/2018 427
Message Collection
Informational
FUJITSU PSWITCH
Cannot delete FCF MAC address. Return fail by hapiBroadFipSnoopMacAddrDelete.
<FileName> Log is created by this file.
<FileLineNumber>
<FunctionName>
Log is created by this line.
Log is created by this function.
<FileName> <FileLineNumber>: In <FunctionName> Couldn't delete
MAC address
Informational
Cannot delete MAC address. Return fail by function hapiBroadFipSnoopMacAddrDelete.
<FileName> Log is created by this file.
<FileLineNumber> Log is created by this line.
<FunctionName> Log is created by this function.
<FileName> <FileLineNumber>: In <FunctionName> Couldn't delete one or more MAC addresses from VLAN
Informational
Failed to delete an L2FDB entry for the MAC/VLAN pair.
<FileName> Log is created by this file.
<FileLineNumber> Log is created by this line.
<FunctionName> Log is created by this function.
<FileName> <FileLineNumber>: In <FunctionName> FIP Snooping not enabled on VLAN <ID>
Informational
Cannot find FIP Snooping configuration data by hapiBroadFipSnoopVlanEntryFind.
<FileName> Log is created by this file.
<FileLineNumber>
<FunctionName>
<ID>
Log is created by this line.
Log is created by this function.
ID
<FileName> <FileLineNumber>: In <FunctionName>, invalid probe port : <InterfaceNumber>
428 December/2018
FUJITSU PSWITCH
Informational
Message Collection
Invalid port number for mirroring configuration.
<FileName> Log is created by this file.
<FileLineNumber>
<FunctionName>
Log is created by this line.
Log is created by this function.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<FileName> : <FileLineNumber> In <FunctionName> Failed to apply
FCF policy <ID>
Informational
Failed to apply FCF policy. Return fail by function hapiBroadFipSnoopIntfPolicyConfig.
<FileName> Log is created by this file.
<FileLineNumber> Log is created by this line.
<FunctionName>
<ID>
Log is created by this function.
ID
<FileName> : <FileLineNumber> In <FunctionName> Failed to create
FCF policy <ID>
Informational
Failed to create FCF policy. Return fail by function hapiBroadFipSnoopFcfPortPolicyCreate.
<FileName> Log is created by this file.
<FileLineNumber>
<FunctionName>
<ID>
Log is created by this line.
Log is created by this function.
ID
<FileName> : <FileLineNumber> In <FunctionName> Failed to remove
FCF policy <ID>
December/2018 429
Message Collection
Informational
Failed to remove FCF policy. Return fail by function hapiBroadFipSnoopIntfPolicyConfig.
<FileName> Log is created by this file.
<FileLineNumber>
<FunctionName>
<ID>
Log is created by this line.
Log is created by this function.
ID
FUJITSU PSWITCH
<FunctionName>/<FileLineNumber>: Failed to clear the bit
BCM_VLAN_UNKNOWN_IP4_MCAST_TOCPU for VLAN <ID>
Informational
Failed to clear the flag BCM_VLAN_UNKNOWN_IP4_MCAST_TOCPU . Return fail by function usl_bcmx_vlan_control_flag_update.
<FunctionName> Log is created by this function.
<FileLineNumber> Log is created by this line.
<ID> ID
<FunctionName>: Failed to commit policy for IPv6 reserved MC traffic. rc = <ErrorCode>
Informational
Failed to commit policy for IPv6 reserved MC traffic. Return fail by hapiBroadPolicyCommit.
<FunctionName> Log is created by this function.
<ErrorCode> Error code
<FunctionName>:<FileLineNumber> usl_bcmx_switch_control_set failed: rv <ErrorCode>
Informational
Return fail in sul_bcmx_switch_control_set.
<FunctionName> Log is created by this function.
<FileLineNumber> Log is created by this line.
<ErrorCode> Error code
ACL expansion failed for L4 Port min=<MinValue>, max=<MaxValue> mask=<Mask>
430 December/2018
FUJITSU PSWITCH
Informational
Failed to build ACL rule for L4 port. Invalid parameter input.
<MinValue> Minimum value
<MaxValue>
<Mask>
Maximum value
Mask value
Message Collection
ACL expansion failed for TCP Flag index=<Index>, maskOr=<Mask>
Informational
Failed to build ACL rule for TCP Flags. Invalid index ID or maskOr input.
<Index> Index
<Mask> Mask value
ACL expansion failed for TCP Flag maskAnd=<Mask>, maskOr=<Mask>
Informational
Failed to build ACL rule for TCP Flags. Invalid mask input.
<Mask> Mask value
ACL failed to apply on port <InterfaceNumber>
Informational
Failed to add an ACL to an interface. Return fail by function hapiBroadQosApplyPolicy.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
ACL instance <ID> not found in internal table
Informational
Failed to delete an ACL from an interface. Return fail by function hapiBroadQosAclPolicyIdFindInstance.
<ID> ID
ACL not applied to port <InterfaceNumber>
December/2018 431
Message Collection
Informational
FUJITSU PSWITCH
Failed to add an ACL to an interface.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
ACL not removed from port <InterfaceNumber>
Informational
Failed to delete an ACL from an interface.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Couldn't delete lport: <InterfaceNumber> in IPMC group, rv =
<ErrorCode>
Informational
Cannot delete lport in IPMC group. Return fail by function usl_bcmx_ipmc_delete_l2_port_groups.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<ErrorCode>
0/1, 0/0/1
Error code
Create or remove sflow tunnel on port:<InterfaceNumber> failed rv
<ErrorCode>
Informational
Create or remove sflow tunnel on a port failed. Return fail by usl_bcmx_port_mirror_set.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<ErrorCode> Error code
custom_policy_init() returned <ErrorCode>
Informational
Failed to init system policy. Return fail by function custom_policy_init.
<ErrorCode> Error code
DAPI: unable to create the trace buffer
432 December/2018
FUJITSU PSWITCH
Informational
Create buffer fail in DAPI.
Message Collection
DAPI: unable to delete the trace buffer
Informational
Delete buffer fail in DAPI.
dapiTraceModeApply: Unable to apply dapi trace mode (<SetValue>) handle=<ID>
Informational
Unable to apply dapi trace mode in function dapiTraceModeApply.
<SetValue> Set Value
<ID> ID
Entry <MacAddress> could not be added, L2 table is full
Informational
Hardware table is full.
<MacAddress> MAC address
Error on call to osapiFsWrite routine on config file <FileName>
Informational
Unable to write data into a file. HPC is not able to save its config data.
<FileName> Log is created by this file.
Failed to add rspan port mirroring configuration (to =
<InterfaceNumber>, rv <ErrorCode>)
Informational
Failed to add rspan port mirroring configuration. Return fail by usl_bcmx_port_rspan_mirror_set.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<ErrorCode>
0/1, 0/0/1
Error code
Failed to apply port mirroring configuration (enable from =
<InterfaceNumber>, to = <InterfaceNumber>, rv <ErrorCode>
December/2018 433
Message Collection
Informational
FUJITSU PSWITCH
Failed to apply port mirroring configuration. Return fail by usl_bcmx_port_mirror_set.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<ErrorCode>
0/1, 0/0/1
Error code
Failed to apply TRILL configuration on <InterfaceNumber>, rv
<ErrorCode>
Informational
Failed to apply TRILL configuration to hardware.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<ErrorCode> Error code
Failed to clear rspan port mirroring configuration (to =
<InterfaceNumber>, rv <ErrorCode>)
Informational
Failed to clear rspan port mirroring configuration. Return fail by usl_bcmx_port_rspan_mirror_set.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<ErrorCode> Error code
Failed to get usp for mac_addr <MacAddress>
Informational
Couldn't find Unit/Slot/Port correspond with the MAC address.
<MacAddress> MAC address
Failed to set the flow-control mode for usp <InterfaceNumber> rv
<ErrorCode>
434 December/2018
FUJITSU PSWITCH
Informational
Message Collection
Failed to set flow-control mode for a port. Return fail by sul_bcmx_port_flow_control_set.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<ErrorCode>
0/1, 0/0/1
Error code
Flow based instance <ID> already added in the internal table
Informational
Flow based rule is already in the table.
<ID> ID
Flow based instance <ID> not found in internal table
Informational
Flow based rule not found.
<ID> ID
Flow based rule not applied to port <InterfaceNumber>
Informational
Failed to add a flow based rule in a port.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Flow based rule not removed from port <InterfaceNumber>
Informational
Failed to remove a flow based rule from a port.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
hapiBroadL3HostPolicyInstall: MAX policies already installed
Informational
Database is full, no more L3 Host Policy can be installed.
hapiBroadL3MacAddressAdd: Invalid USP <InterfaceNumber>
December/2018 435
Message Collection
Informational
FUJITSU PSWITCH
Failed to add an L3-enabled MAC address entry to hardware. Unit/Slot/Port is unknown.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
hapiBroadL3MacAddressDelete: Invalid USP <InterfaceNumber>
Informational
Failed to delete an L3-enabled MAC address entry from hardware. Unit/Slot/Port is unknown.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
hapiBroadL3RouteEntryAdd: Ignoring IPv6 route with prefix len /65 through /127
Informational
Not support IPv6 prefix lengths > 64.
hapiBroadL3RouterCardRemove: Failed deleting CPU nexthop
<ErrorCode>
Informational
Failed to remove L3 rounting logical card. Return fail by function usl_bcmx_l2_egress_destroy.
<ErrorCode> Error code
hapiBroadReceive: Invalid USP (<InterfaceNumber>)
Informational
A port was not able to be translated correctly during the receive.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
hapiBroadReceive: Invalid USP(tempUsp) (<InterfaceNumber>)
436 December/2018
FUJITSU PSWITCH
Informational
Message Collection
A port was not able to be translated correctly during the receive.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
hapiBroadRoutingMulticastMacFromIpAddr: Invalid IPv4Address
Informational
Cannot get a valid ipv4 address. Return fail by function inetAddressGet.
hapiBroadRoutingMulticastMacFromIpAddr: Invalid IPv6Address
Informational
Cannot get a valid ipv6 address. Return fail by function inetAddressGet.
hapiL2AddrFlushQueue: failed in recv message
Informational
Failed to get a message from L2 Address Flush queue. No flush is requested.
hpcHardwareBlockMaskSet: could not set block mask <Mask>
Informational
Failed to set block mask in hpcHardwareBlockMaskSet.
<Mask> Mask value
hpcHardwareRpc: RPC Timeout for transaction <ID>
Informational
RPC timeout, unable to send RPC message.
<ID> ID
Invalid Flush type <TypeValue> requested
Informational
Tried to send a flush request with invalid flush type. Do nothing.
<TypeValue> Type Value
Invalid getOrSet command
December/2018 437
Message Collection
Informational
FUJITSU PSWITCH
Used an invaild action instead of GET while getting MAC address entry.
Invalid meter info specified: cir <SetValue>, cbs <SetValue>, pir
<SetValue>, pbs <SetValue>
Informational
Failed to add a meter to an existing rule. Invalid meter informations.
<SetValue> Set Value
Invalid priority.
Informational
Failed to add policy priority rule. Invalid priority number.
Invalid Transceiver present in the <InterfaceNumber> (slot/port)
Informational
Detect an invalid transceiver type.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
No DiffServ policy applied on port <InterfaceNumber>
Informational
Failed to delete an a policy-calss instance from a port. No DiffServ policy exist.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Received L2 FDB entry notification for invalid usp
<InterfaceNumber>.
Informational
Received a frame from unknown unit/slot/port.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Received PDU with invalid usp <InterfaceNumber>.
438 December/2018
FUJITSU PSWITCH
Informational
Message Collection
Received a frame from unknown unit/slot/port.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Rule count exceeded.
Informational
Failed to add policy rule. Rule count exceeded.
support only for single asic boxes
Informational
Hardware probably doesn't support monitering system buffer usage on the local unit.
Transceiver present in <InterfaceNumber> (slot/port) is not supported
Informational
Detect an not supported transceiver type.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Transceiver present in <InterfaceNumber> (slot/port) is not supported
Informational
!HELP! Somehow it want to indicate it doesn't support a specific type of SFP/SFP+ cable
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Transceiver present in the <InterfaceNumber> (slot/port) is not supported
December/2018 439
Message Collection
Informational
FUJITSU PSWITCH
!HELP! Somehow it want to indicate it doesn't support a specific type of SFP/SFP+ cable
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<FileName> <FileLineNumber>: <FunctionName>(Port
<InterfaceNumber>, cmd=<Command>) - Invalid getOrSet Command =
<Command>
Notice
Invalid get/set command type.
<FileName> Log is created by this file.
<FileLineNumber> Log is created by this line.
<FunctionName> Log is created by this function.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<Command>
0/1, 0/0/1
Command
<FileName> <FileLineNumber>: In <FunctionName> call to
'bcm_l2_addr_add' - FAILED : <ErrorCode>. Failed to add an L2 address to the MAC table. This should
Notice
Failed to add an L2 address to the MAC table. Return fail by bcm_l2_addr_add.
<FileName> Log is created by this file.
<FileLineNumber> Log is created by this line.
<FunctionName>
<ErrorCode>
Log is created by this function.
Error code
ACL internal table overflow. Attempting to add an ACL to a full table.
Notice
Failed to add an ACL to an interface. Return fail by function hapiBroadQosAclPolicyTLVAdd.
Dropping the packet as the length <PacketLength> is greater than max allowed frame size <MaxValue>
440 December/2018
FUJITSU PSWITCH
Notice
Message Collection
Dropping the packet because packet length is greater than max allowed frome size.
<PacketLength> Packet length
<MaxValue> Maximum value
ERROR: policy <ID>, tmpPolicy <ID>, size <SizeValue>, data
<SetValue>. An issue installing the policy due to a possible duplicate hash.
Notice
An issue installing the policy due to a possible duplicate hash.
<ID> ID
<SizeValue> An integer for a specific range or a limit value.
<SetValue> Set Value
Failed to install NDP rate limit policy.
Notice
Failed to configure system wide NDP rate limit. Return fail by function hapiBroadPolicyCommit.
Failed to update NDP rate limit policy.
Notice
Failed to configure system wide NDP rate limit. Return fail by function hapiBroadPolicyUpdateStart.
Failure reading I2C <FileName>(<FileLineNumber>)
Notice
Failed to read multi-byte data at specific addr within a i2c device for fan tray.
<FileName> Log is created by this file.
<FileLineNumber> Log is created by this line.
Failure writing I2C <FileName>(<FileLineNumber>)
December/2018 441
Message Collection
Notice
FUJITSU PSWITCH
Failed to write multi-byte data at specific addr within a i3c device for fan tray.
<FileName> Log is created by this file.
<FileLineNumber> Log is created by this line.
FLOW based stats internal table overflow. Attempting to add an Flow based rule to a full table.
Notice
Flow based rule table is full.
hapiBroadL3HostEntryAdd:: Host/Nexthop/MAC table full.
Notice
Failed to add a L3 host entry. The entry table full.
hapiBroadL3HostEntryModify: Nexthop/MAC table full.
Notice
Failed to update the L3 host entry. The entry table full.
hapiBroadL3RouteEntryAdd: Route/Nexthop/ECMP table full.
Notice
Failed to add an L3 routing entry. The entry table full.
hapiBroadL3RouteEntryModify: Nexthop/ECMP table full.
Notice
Failed to modify a L3 route entry. The entry table full.
In hapiBroadQosCosQueueWeightsConfig, Failed to configure minimum bandwidth. Available bandwidth <Bandwidth>. Attempting to configure the bandwidth beyond it? capabilities.
442 December/2018
FUJITSU PSWITCH
Notice
Message Collection
Failed to configure Cos Queue Weights. Invalid bandwidth configuration.
<Bandwidth> Band width
Invalid LAG id <ID>. Possible synchronization issue between the
BCM driver and HAPI
Notice
Possible synchronization issue between the BCM driver and HAPI
<ID> ID
Invalid uport calculated from the BCM uport bcmx_l2_addr->lport
= <InterfaceNumber>. Uport not valid from BCM driver.
Notice
Failed to find user-defined application port associated with logical port.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Invalid USP calculated from the BCM uport bcmx_l2_addr->lport =
<InterfaceNumber>. USP not able to be calculated from the learn event for BCM driver.
Notice
User-defined application port from logical port was translated into unknown
Unit/Slot/Port.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Invalid USP unit = <ID>, slot = <ID>, port = <InterfaceNumber>.
A port was not able to be translated correctly during the receive.
Notice
A port was not able to be translated correctly during the receive.
<ID> ID
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Sema give failed, semId <ID>
December/2018 443
Message Collection
Notice
Failed to give semaphore.
<ID> ID
Sema take failed, semId <ID>
Notice
Failed to take semaphore.
<ID> ID
FUJITSU PSWITCH
USL: Error adding access port(<InterfaceNumber>) to AVL tree
FULL(<ErrorCode>)
Notice
Failed to send a message to USL worker task via message queue.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<ErrorCode> Error code
USL: Error adding non-unicast nw port clone(<InterfaceNumber>) to
AVL tree FULL(<ErrorCode>)
Notice
Insufficient resources while adding cloned network port in database of driver programing interface.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<ErrorCode> Error code
USL: Error adding non-unicast nw port(<InterfaceNumber>) to AVL tree FULL(<ErrorCode>)
Notice
Insufficient resources while adding network port in database of driver programing interface.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<ErrorCode> Error code
USL: Error adding tenant(<ID>) to AVL tree FULL(<ErrorCode>)
444 December/2018
FUJITSU PSWITCH
Notice
Message Collection
Insufficient resources while adding tenant in database of driver programing interface.
<ID> ID
<ErrorCode> Error code
USL: Error adding unicast nw port clone <InterfaceNumber> to AVL tree FULL(<ErrorCode>)
Notice
Insufficient resources while adding cloned network port in database of driver programing interface.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<ErrorCode> Error code
USL: Error adding unicast nw port(<InterfaceNumber>) to AVL tree
FULL(<ErrorCode>)
Notice
Insufficient resources while adding network port in database of driver programing interface.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<ErrorCode> Error code
usl_bcmx_ipmc_add success (previously failed): group =
<IPAddress>, source = <IPAddress>, vlan = <ID>, rv = <ErrorCode>
Notice
Success to add a multicast IP entry to hardware.
<IPAddress> ip_address, or, ipv6_address, or hostname
<ID>
<ErrorCode>
ID
Error code
usl_l3host_active_timer(): not initialised so dropping timer
December/2018 445
Message Collection
Notice
L3 USL database is not initialized yet.
FUJITSU PSWITCH
uslTraceModeApply: Unable to apply Unitmgr trace mode
(<SetValue>), handle=<GetValue>
Notice
Unable to start/stop tracing in the trace block. The trace block is not found.
<SetValue> Set Value
<GetValue> Get Value
Failed to initialize EVB bcmx.
Notice
Error during initializing EVB rpc. It may failed to create semaphore, register rpc handler.
Failed to create evb schannel <SchannelId> in lport
<InterfaceNumber>, hwRv <ErrorCode> dbRv <ErrorCode>.
Notice
Failed to configure schannel VLAN mapping to default CVLAN in lport, or insert to database.
<SchannelId> Scannel ID
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<ErrorCode> Error code
Failed to delete evb schannel <SchannelId> in lport
<InterfaceNumber>, hwRv <ErrorCode> dbRv <ErrorCode>.
Notice
Failed to delete schannel VLAN from lport, or remove from database.
<SchannelId> Scannel ID
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<ErrorCode>
0/1, 0/0/1
Error code
Failed to add cvlan <VlanID> member lport <InterfaceNumber> in svlan <VlanID>. hwRv <ErrorCode> dbRv <ErrorCode>.
446 December/2018
FUJITSU PSWITCH
Notice
Message Collection
Failed to configure schannel VLAN mapping to CVLAN in lport, or update to database.
<VlanID> VLAN ID
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<ErrorCode> Error code
Failed to delete cvlan <VlanID> member lport <InterfaceNumber> in svlan <VlanID>. hwRv <ErrorCode> dbRv <ErrorCode>.
Notice
Failed to delete schannel VLAN mapping to CVLAN in lport, or update to database.
<VlanID> VLAN ID
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<ErrorCode> Error code
Failed to set flood group(Id: 0x<ID>) for vlan <VlanID>. hwRv
<ErrorCode> dbRv <ErrorCode>.
Notice
Failed to set BUM flood group id for VLAN, or update to database.
<ID> ID
<VlanID> VLAN ID
<ErrorCode> Error code
Could not set evb port bridge mode for gport <InterfaceNumber>. hwRv <ErrorCode> dbRv <ErrorCode>.
Notice
Failed to set port bridging mode for gport.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<ErrorCode>
0/1, 0/0/1
Error code
Could not set evb schannel mode for gport <InterfaceNumber>. hwRv
<ErrorCode> dbRv <ErrorCode>.
December/2018 447
Message Collection
Notice
FUJITSU PSWITCH
Failed to enable EVB mode for gport.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<ErrorCode>
0/1, 0/0/1
Error code
<FileName> +<FileLineNumber> PHY register get operation failed for port = <InterfaceNumber>, flags=<TypeValue> devAddr=<IPAddress>
Warning
Could not get PHY register. Return fail by function bcm_port_phy_get.
<FileName> Log is created by this file.
<FileLineNumber> Log is created by this line.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<TypeValue>
<IPAddress>
0/1, 0/0/1
Type Value ip_address, or, ipv6_address, or hostname
<FileName> +<FileLineNumber> PHY register modify operation failed for port = <InterfaceNumber>, flags=<TypeValue> devAddr=<IPAddress>
Warning
Could not modify PHY register. Return fail by function bcm_port_phy_modify.
<FileName> Log is created by this file.
<FileLineNumber> Log is created by this line.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<TypeValue>
<IPAddress>
Type Value ip_address, or, ipv6_address, or hostname
<FileName> +<FileLineNumber> PHY register set operation failed for port = <InterfaceNumber>, flags=<TypeValue> devAddr=<IPAddress>
448 December/2018
FUJITSU PSWITCH
Warning
Message Collection
Could not set PHY register. Return fail by function bcm_port_phy_set.
<FileName> Log is created by this file.
<FileLineNumber> Log is created by this line.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<TypeValue>
<IPAddress>
0/1, 0/0/1
Type Value ip_address, or, ipv6_address, or hostname
<FunctionName>: Calling usl_bcmx_vlan_block_enable()
Warning
A debug message about calling usl_bcmx_vlan_block_enable()
<FunctionName> Log is created by this function.
<FunctionName>: dbRv = <ErrorCode>
Warning
A warning debug message about enabling/disabling VLAN block in USL database.
<FunctionName> Log is created by this function.
<ErrorCode> Error code
<FunctionName>: hwRv = <ErrorCode>
Warning
A warning debug message about enabling/disabling VLAN block in hardware.
<FunctionName> Log is created by this function.
<ErrorCode> Error code
<FunctionName>: Received command: blockType = <TypeValue>, vlanId
= <ID>, floodAllow = <State>
Warning
A debug message about blocking or unblocking all ports in a VLAN from flooding.
<FunctionName> Log is created by this function.
<TypeValue>
<ID>
<State>
Type Value
ID
State
<FunctionName>: Received command: Port = <InterfaceNumber>, blockType = <TypeValue>, vlanId = <ID>, floodAllow = <State>
December/2018 449
Message Collection
Warning
FUJITSU PSWITCH
A debug message about updating the list of ports blocked from flooding on a
VLAN
<FunctionName> Log is created by this function.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<TypeValue>
<ID>
<State>
Type Value
ID
State
<FunctionName>: Received parameters: blockType = <TypeValue>, vlanId = <ID>, enable = <State>
Warning
A warning debug message about enabling/disabling using VLAN profiles to block ports from flooding on a VLAN.
<FunctionName> Log is created by this function.
<TypeValue> Type Value
<ID>
<State>
ID
State
<FunctionName>: Received parameters: modid = <ID>, port =
<InterfaceNumber>, blockType = <TypeValue>, vlanId = <ID>, enable
= <State>
Warning
A warning debug message about adding/removing a port from the block list of a
VLAN.
<FunctionName> Log is created by this function.
<ID> ID
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<TypeValue>
<State>
Type Value
State
<FunctionName>: unit <ID>: bcm_vlan_block_get rv = <ErrorCode>
450 December/2018
FUJITSU PSWITCH
Warning
A warning debug message about vlan block it gets.
<FunctionName> Log is created by this function.
<ID>
<ErrorCode>
ID
Error code
Message Collection
<FunctionName>: unit <ID>: bcm_vlan_block_get vlan = <ID>, rv =
<ErrorCode>
Warning
A warning debug message about vlan block it gets.
<FunctionName> Log is created by this function.
<ID> ID
<ErrorCode> Error code
<FunctionName>: unit <ID>: bcm_vlan_block_set rv = <ErrorCode>
Warning
A warning debug message about vlan block it sets.
<FunctionName> Log is created by this function.
<ID> ID
<ErrorCode> Error code
<FunctionName>: unit <ID>: bcm_vlan_block_set vlan = <ID>, rv =
<ErrorCode>
Warning
A warning debug message about vlan block it sets.
<FunctionName> Log is created by this function.
<ID>
<ErrorCode>
ID
Error code
<FunctionName>: usl_db_vlan_block_enable rv = <ErrorCode>
Warning
A warning debug message about enabling/disabling VLAN block in USL database.
<FunctionName> Log is created by this function.
<ErrorCode> Error code
<FunctionName>: usl_db_vlan_block_port_update rv = <ErrorCode>
December/2018 451
Message Collection
Warning
FUJITSU PSWITCH
A warning debug message about updating the vlan database in USL database
<FunctionName> Log is created by this function.
<ErrorCode> Error code
<FunctionName>: vlan = <ID>, blockType = <TypeValue>
Warning
A warning debug message about enabling/disabling blocking of flooding of the
CPU port.
<FunctionName> Log is created by this function.
<ID> ID
<TypeValue> Type Value
Copying policy rules to non-empty list, possible memory leak.
Warning
Function call to hapiBroadPolicyCopy.
Did not delete ECMP egress object <ID> due to reference count mismatch; h/w ref count <CountValue>
Warning
Failed to delte ECMP entry due to reference count mismatch.
<ID> ID
<CountValue> Count Value
Did not delete NHOP egress object <ID> due to reference count mismatch; h/w ref count <CountValue>
Warning
Failed to delete L3 next hop due to reference count mismatch.
<ID> ID
<CountValue> Count Value
Driver: Card insertion for unit <ID>, slot <ID> failed. Wait for retry.
452 December/2018
FUJITSU PSWITCH
Warning
Failed to insert a physicall card.
<ID> ID
Message Collection
Driver: Failed to attach card <UnitID>/<SlotNumber> in rx subsystem, error code <ErrorCode>
Warning
Return fail in function hapiBroadRxDeviceAdd.
<UnitID> Unit ID
<SlotNumber> Slot number
<ErrorCode> Error code
Driver: Failed to register callback with rx, error code
<ErrorCode>
Warning
Return fail in function hapiBroadRxRegister.
<ErrorCode> Error code
Driver: Failed to register with linscan, error code <ErrorCode>
Warning
Return fail in function hapiBroadLinkscanRegister.
<ErrorCode> Error code
Driver: Failed to start rx subsystem, error code <ErrorCode>
Warning
Return fail in function hapiBroadRxStart.
<ErrorCode> Error code
Failed to add action to Auto Dos policy
Warning
Failed to add action to Auto Dos policy.
Failed to add qualifier to Auto Dos policy
December/2018 453
Message Collection
Warning
Failed to add qualifier to Auto Dos policy.
FUJITSU PSWITCH
Failed to add qualifier to EAPOL Flooding policy
Warning
Failed to add qualifier to EAPOL Flooding policy.
Failed to add rule to Auto Dos policy
Warning
Failed to add rule to Auto Dos policy.
Failed to add rule to EAPOL Flooding policy
Warning
Failed to add rule to EAPOL Flooding policy.
Failed to commit Auto Dos policy
Warning
Failed to commit Auto Dos policy.
Failed to commit EAPOL Flooding policy
Warning
Failed to commit EAPOL Flooding policy.
Failed to convert bcm port to gport
Warning
Return fail in function bcm_port_gport_get.
Failed to create Auto Dos policy
Warning
Failed to create Auto Dos policy.
Failed to create EAPOL Flooding policy
454 December/2018
FUJITSU PSWITCH
Warning
Failed to create EAPOL Flooding policy.
Message Collection
Failed to delete Auto Dos policy
Warning
Failed to delete Auto Dos policy.
Failed to get Cpu cosq <ID> drop counters, error <ErrorCode>
Warning
Failed to get CPU cosq drop counters. Return fail by sul_bcmx_cosq_stat_get32.
<ID> ID
<ErrorCode> Error code
Failed to get trace profile for packet
Warning
Return fail in function bcm_switch_pkt_trace_info_get.
Failed to install policy for blocking mDNS packets to CPU.
Warning
Failed to install policy for blocking mDNS packets to CPU.
Failed to install policy for NULL MAC address.
Warning
Failed to install policy for NULL MAC address.
Failed to install v6 policy for blocking mDNS packets to CPU.
Warning
Failed to install v6 policy for blocking mDNS packets to CPU.
Failed to remove Auto Dos policy
December/2018 455
Message Collection
Warning
Failed to remove Auto Dos policy.
FUJITSU PSWITCH
Failed to send host inuse timer expiry event, rc <ErrorCode>
Warning
Failed to send a message to USL worker task via message queue.
<ErrorCode> Error code
HAPI LPORT(unit=<ID>): Rlink device detach failed: <ErrorMessage>
Warning
Return fail in function bcm_rlink_device_detach.
<ID> ID
<ErrorMessage> Error message
HAPI LPORT: Failed to add devport hash, unit=<ID>, port=<InterfaceNumber>
Warning
Failed to add devport hash. Return fail in function hapiBroadDevPortHashAdd.
<ID> ID
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
HAPI LPORT: Failed to add lport <InterfaceNumber> (unit <ID>, port
<InterfaceNumber>). <ErrorCode>: <ErrorMessage>.
Warning
Return fail in function hapiBroadPortAdd.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<ID>
<ErrorCode>
<ErrorMessage>
0/1, 0/0/1
ID
Error code
Error message
HAPI LPORT: Failed to add unit for L2 notify, unit=<ID>.
<ErrorCode>: <ErrorMessage>
456 December/2018
FUJITSU PSWITCH
Warning
Return fail in function hapiBroadL2DeviceAdd.
<ID> ID
<ErrorCode>
<ErrorMessage>
Error code
Error message
Message Collection
HAPI LPORT: Failed to add unit for linkscan, unit=<ID>.
<ErrorCode>: <ErrorMessage>
Warning
Return fail in function hapiBroadLinkscanDeviceAdd.
<ID> ID
<ErrorCode> Error code
<ErrorMessage> Error message
HAPI LPORT: Failed to add unit to RX, unit=<ID>. <ErrorCode>:
<ErrorMessage>
Warning
Return fail in function hapiBroadRxDeviceAdd.
<ID> ID
<ErrorCode>
<ErrorMessage>
Error code
Error message
HAPI LPORT: Failed to add uport hash, unit=<ID>, port=<InterfaceNumber>
Warning
Failed to add a uport. Return fail in function hapiBroadUportAdd.
<ID> ID
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
HAPI RX: Intr RX handler will not receive tunneled pkts:
<FunctionName>
December/2018 457
Message Collection
Warning
FUJITSU PSWITCH
Set BCM_RCO_F_INTR flag in RX register function. This flag will cause RX handler will not receive tunneled packets.
<FunctionName> Log is created by this function.
HAPI RX: Unit <ID> add failed: <ErrorMessage>
Warning
Return fail in function hapiBroadRxDeviceAdd.
<ID> ID
<ErrorMessage> Error message
HAPI RX: Unit <ID> register failed: <ErrorMessage>
Warning
Return fail in function bcm_rx_register.
<ID> ID
<ErrorMessage> Error message
HAPI RX: Unit <ID> remove failed: <ErrorMessage>
Warning
Return fail in function hapiBroadRxDeciceRemove.
<ID> ID
<ErrorMessage> Error message
HAPI RX: Unit <ID> unregister failed: <ErrorMessage>
Warning
Return fail in function bcm_rx_unregister.
<ID> ID
<ErrorMessage> Error message
hpcHardwareDefaultConfigApply: could not set cml flag on loopback port <InterfaceNumber>
458 December/2018
FUJITSU PSWITCH
Warning
Message Collection
Failed to set port learning mode in loopback port.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Invalid L3 NH intf returned in trace profile
Warning
Return fail in function usl_bcmx_l3_egress_get.
Invalid trunk id returned in trace profile
Warning
Return fail in function hapiBroadTgidToUspConvert.
Lag Async done message wait timeout on lag queue <ID>, timeout
<TimeValue> secs
Warning
Failed to take Lag Async done semaphore.
<ID> ID
<TimeValue> Time Value
OF1.3 Rule num <ID> delete from database failed.
Warning
Failed to update openflow 1.3 rule. Return fail by function avlDeleteEntry.
<ID> ID
OF1.3 Rule num <ID> delete from hardware failed, policy id <ID> delete error.
Warning
Failed to delete openflow 1.3 rule. Return fail by function hapiBroadPolicyDelete.
<ID> ID
OF1.3 Rule num <ID> install failed, rule does not exist in database.
December/2018 459
Message Collection
Warning
FUJITSU PSWITCH
Failed to update openflow 1.3 rule. The rule does not exist in database.
<ID> ID
OF1.3 Rule num <ID> remove failed, rule does not exist in database.
Warning
Failed to remove openflow 1.3 rule. The rule does not exist in database.
<ID> ID
OpenFlow 1.0 Rule num <ID> delete from database failed.
Warning
Failed to delete openflow 1.0 rule. Return fail by function avlDeleteEntry.
<ID> ID
OpenFlow 1.0 Rule num <ID> delete from hardware failed, policy id
<ID> delete error.
Warning
Failed to delete openflow 1.0 rule. Return fail by function hapiBroadPolicyDelete.
<ID> ID
OpenFlow 1.0 Rule num <ID> install failed, rule does not exist in database.
Warning
Failed to update openflow 1.0 rule. The rule does not exist in database.
<ID> ID
OpenFlow 1.0 Rule num <ID> remove failed, rule does not exist in database.
Warning
Failed to delete openflow 1.0 rule. The rule does not exist in database.
<ID> ID
OpenFlow Access Rule num <ID> delete from database failed.
460 December/2018
FUJITSU PSWITCH
Warning
Openflow access rule delete fail, database delete fail.
<ID> ID
Message Collection
OpenFlow Access Rule num <ID> delete from hardware failed, policy id <ID> delete error.
Warning
Openflow delete policy fail, return fail by function hapiBroadPolicyDelete.
<ID> ID
OpenFlow Access Rule num <ID> install failed, rule does not exist in database.
Warning
Openflow access rule delete fail, rule does not exist in database.
<ID> ID
OpenFlow counter add failed for Access Rule num <ID>.
Warning
Failed to add a counter to rule. Return fail by function hapiBroadPolicyRuleCounterAdd.
<ID> ID
OpenFlow Fwd Rule num <ID> delete from database failed.
Warning
Fail to delete openflow forward rule. Return fail by function avlDeleteEntry.
<ID> ID
OpenFlow Fwd Rule num <ID> delete from hardware failed, policy id
<ID> delete error.
Warning
Fail to delete openflow forward rule. Return fail by function hapiBroadPolicyDelete.
<ID> ID
OpenFlow Fwd Rule num <ID> install failed, rule does not exist in database.
December/2018 461
Message Collection
Warning
FUJITSU PSWITCH
Fail to update openflow forward rule. The rule dones not exist in database.
<ID> ID
OpenFlow Fwd Rule num <ID> remove failed, rule does not exist in database.
Warning
Fail to delete openflow forward rule. The rule dons not exist in database.
<ID> ID
OpenFlow Fwd Rule num <ID> update error, add ports failed
Warning
Fail to update openflow forward rule. Return fail by function hapiBroadOpenFlowRedirectPortListUpdate.
<ID> ID
OpenFlow Fwd Rule num <ID> update error, remove ports failed
Warning
Fail to update openflow forward rule. Return fail by function hapiBroadOpenFlowRedirectPortListUpdate.
<ID> ID
OpenFlow Fwd Rule num <ID> update failed, rule does not have redirect to port list action.
Warning
Fail to update openflow forward rule. The rule dones not have a redirect to port list action.
<ID> ID
Received async failure notification for unknown host from USL.
462 December/2018
FUJITSU PSWITCH
Warning
Message Collection
A notification for indicate that a host could not be inserted into the HW due to an unknow host from USL.
Reconciliation error: Unit/Port <InterfaceNumber>: CmdId <ID> does not have a valid value, operValid <Id> shadow Valid <ID>
Warning
Operation database and shadow database are not synchronized.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<ID>
<Id>
0/1, 0/0/1
ID
TCAM API could not create policy
Warning
Failed to create TCAM policy. Return fail by function hapiBroadPolicyCreate.
TCAM API counter add failed
Warning
Failed to add a TCAM policy to hardware. Return fail by function hapiBroadPolicyRuleCounterAdd.
TCAM API group priority set failed
Warning
Failed to add a TCAM policy to hardware. Return fail by function hapiBroadPolicyGroupPrioSet.
TCAM API Policy Action add failed
Warning
Failed to add a TCAM policy to hardware. Return fail by function broadTcamActionAdd.
TCAM API Policy Rule add failed
December/2018 463
Message Collection
Warning
FUJITSU PSWITCH
Failed to add a TCAM policy to hardware. Return fail by function hapiBroadPolicyPr.
TCAM API Policy Rule QUalifier failed
Warning
Failed to add a TCAM policy to hardware. Return fail by function hapiBroadPolicyRuleQualifierAdd.
TCAM API Policy stage set failed
Warning
Failed to add a TCAM policy to hardware. Return fail by function hapiBroadPolicyStageSet.
WARN: HAPI LS dev add enable, <ErrorCode>: <ErrorMessage>
Warning
Enable link scan fail in hapiBroadLinkscanDeviceAdd.
<ErrorCode> Error code
<ErrorMessage> Error message
WARN: HAPI LS device add reg, <ErrorCode>: <ErrorMessage>
Warning
Register link scan fail in hapiBroadLinkscanDeviceAdd.
<ErrorCode> Error code
<ErrorMessage> Error message
2.1.22.
DTL
<FunctionName>: Intf <InterfaceNumber> Member set is NULL
464 December/2018
FUJITSU PSWITCH
Informational
Message Collection
No member for interface.
<FunctionName> Log is created by this function.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
cardCmd <Command> failed for unit/slot <InterfaceNumber>
Informational
Card command faild.
<Command> Command
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Could not get USP for intf <InterfaceNumber>
Informational
A port was not able to be translated correctly during the receive.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
DTL: Could not create dtlInfo.routeEntrySem
Informational
Failed to create semaphore for dtlInfo.routeEntrySem.
DTL: Could not create dtlLockSem
Informational
Failed to create semaphore for dtlLockSem.
DTL: Could not create dtlTask
Informational
Create dtlTask faile.
DTL: dtl pdu receive msg queue full , mrc=<ErrorCode>
December/2018 465
Message Collection
Informational
Msg queue is full for dtl pdu receive msg queue.
<ErrorCode> Error code
FUJITSU PSWITCH
DTL: dtlTask msg receive error, status = <ErrorCode>
Informational
dtlTask fail to receive data from msg queue.
<ErrorCode> Error code
DTL: Failed to initialize DAPI
Informational
DAPI initial fail.
DTL: link change msg queue full , mrc=<ErrorCode>
Informational
Msg queue is full for link change msg queue.
<ErrorCode> Error code
DTL: link change msg send failed, mrc=<ErrorCode>
Informational
Failed to send link change msg in DTL module.
<ErrorCode> Error code
DTL: pdu receive msg send failed, mrc=<ErrorCode>
Informational
Failed to send pdu receive msg in DTL module.
<ErrorCode> Error code
DTL: Task failed to start
Informational
DTL task fail.
DTL: Unable to create msg queue for dtlTask
466 December/2018
FUJITSU PSWITCH
Informational
Failed to create msg queue for dtlTask.
Message Collection
Function: <FunctionName> line:<FileLineNumber> dapiCtl return an error!
Informational
Some error happen in dapiCtl.
<FunctionName> Log is created by this function.
<FileLineNumber> Log is created by this line.
Function: <FunctionName> line:<FileLineNumber> nimGetUnitSlotPort return an error!
Informational
Some error happen in nimGetUnitSlotPort.
<FunctionName> Log is created by this function.
<FileLineNumber> Log is created by this line.
Function: <FunctionName> line:<FileLineNumber> Unsupported component ID(<ComponentID>)!
Informational
Not supported component ID.
<FunctionName> Log is created by this function.
<FileLineNumber>
<ComponentID>
Log is created by this line.
Component ID
Function: <FunctionName> line:<FileLineNumber> Wrong component
ID(<ComponentID>)!
Informational
Invalid component ID.
<FunctionName>
<FileLineNumber>
<ComponentID>
Log is created by this function.
Log is created by this line.
Component ID
invalid Ddusp
December/2018 467
Message Collection
Informational
FUJITSU PSWITCH
A port was not able to be translated correctly during the receive.
invalid usp
Informational
A port was not able to be translated correctly during the receive.
received invalid dot1x status
Informational
Received invalid dot1x status.
received invalid MSTP state
Informational
Invalid MSTP state.
Unable to create dtlL2McastSema
Informational
Failed to create semaphore for dtlL2McastSema.
2.1.23.
DVLANTAG
nimIntfQuery failed for intf <InterfaceNumber>
Informational
nimIntfQuery failed for intf
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Dvlantag failed to save configuration
Informational
Dvlantag failed to save configuration.
Dvlantag: Unable to set custId on interface <InterfaceNumber>
468 December/2018
FUJITSU PSWITCH
Informational
Message Collection
Unable to set custId on interface
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Dvlantag: Unable to set etherType <EtherType>
Informational
Unable to set etherType
<EtherType> Ether type
Dvlantag: Unable to set etherType on interface <InterfaceNumber>
Informational
Unable to set etherType on interface
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Dvlantag: Unable to set mode on interface <InterfaceNumber>
Informational
Unable to set mode on interface. Maybe the system can't get the unit slot port.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
dvlantagApplyConfigData: Failure in applying config data for interface <InterfaceNumber>
Informational
Failure in applying config data for interface
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
dvlantagCnfgrInitPhase1Process: Unable to create r/w lock for dvlantag
Informational
Unable to create r/w lock for dvlantag
dvlantagIntfChangeCallBack: Received an interface change callback while not ready to receive it
December/2018 469
Message Collection
Informational
Unable to set custId on interface
FUJITSU PSWITCH
Failed nim registration for Interface Change Callback
Informational
Failed nim registration for Interface Change Callback
Failed to clear ethertype <EtherType> from interface
<InterfaceNumber>
Informational
Failed to clear ethertype.
<EtherType> Ether type
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to delete ethertype from intf = <InterfaceNumber>, rc=
<ErrorCode>
Informational
Failed to delete ethertype.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<ErrorCode>
0/1, 0/0/1
Error code
Failed to remove Ethertype <EtherType> from interface
<InterfaceNumber>
Informational
Failed to remove Ethertype
<EtherType> Ether type
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to remove primary ethertype <EtherType> from interface
<InterfaceNumber>
470 December/2018
FUJITSU PSWITCH
Informational
Message Collection
Failed to remove primary ethertype
<EtherType> Ether type
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to set primary ethertype <EtherType> on interface
<InterfaceNumber>
Informational
Failed to set primary ethertype.
<EtherType> Ether type
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Primary Ethertype set to <EtherType>
Informational
Setting primary ethertype to given value.
<EtherType> Ether type
Primary Ethertype set to <EtherType> failed
Informational
Setting primary ethertype failed.
<EtherType> Ether type
dvlantagIntfIsConfigurable: Error accessing dvlantag config data for interface <InterfaceNumber>. A default configuration does not exist for this interface. Typically a case when a new interface is created and has no pre-configuration.
Warning
Either a table management error between dvlantagCfg and dvlantagMapTbl or there is a synchronization issue between NIM and components w.r.t interface creation/deletion.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
dvlantagIntfPrimaryEthertypeSet: Failed to set primary ethertype of interface <InterfaceNumber> to ethertype <EtherType>.
December/2018 471
Message Collection
Warning
FUJITSU PSWITCH
Failed to set primary tpid, the system will try to revert.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<EtherType>
0/1, 0/0/1
Ether type
Failed to apply DVLAN tunnel mode rc= <ErrorCode>
Warning
Maybe the system can't get the unit slot port.
<ErrorCode> Error code
Failed to remove secondary ethertype <EtherType> of interface
<InterfaceNumber>.
Warning
Failed to remove secondary ethertype
<EtherType> Ether type
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
2.1.24.
DYNAMIC_ARP_INSPECTION
DAI failed to register for VLAN changes
Alert
Register VLAN change function failed
DAI unable to create event queue
Alert
Create DAI event queue failed
DAI unable to create packet queue
Alert
Create DAI packet queue failed
ERROR: Unable to create DAI thread
472 December/2018
FUJITSU PSWITCH
Alert
Create DAI task failed
Message Collection
Failed to send NIM startup phase <NimStartupPhaseNumber> to DAI thread
Alert
Send NIM startup event to DAI task failed
<NimStartupPhaseNumber> NIM startup phase number
Failure creating DAI queue semaphore
Alert
Create DAI queue semaphore failed
Failure sending DAI configurator init message
Alert
Send init message event to DAI task queue failed
daiCnfgrInitPhase2Process: Failed to register with NIM
Critical
Register NIM interface change callback function failed
daiCnfgrInitPhase2Process: Failed to register with nvStore
Critical
Register notify function failed
Unable to create read/write lock for DAI
Critical
Create DAI read / write lock failed
DAI dropped ARP frame rcv on i/f <InterfaceNumber> in vlan <VlanID>, due to - <DaiFailureName>
December/2018 473
Message Collection
Error
FUJITSU PSWITCH
Record DAI dropped packet incoming interface
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<VlanID>
<DaiFailureName>
0/1, 0/0/1
VLAN ID
"SRC MAC FAILURE", "DST MAC FAILURE", "IP VALID FAILURE" ...
DAI event queue is NULL when processing Interface change
Error
DAI event queue is NULL when processing Interface change
DAI event queue is NULL when processing VLAN change
Error
DAI event queue is NULL when processing VLAN change
DAI failed to set interface <InterfaceNumber> as
<DaiInterfaceTrust> in hardware
Error
Setting interface DAI status to hardware failed
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<DaiInterfaceTrust> "trusted", "untrusted"
DAI VLAN count on interface <InterfaceNumber> is bad
Error
DAI VLAN count failed
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
daiFrameUnicast: Outgoing interface <InterfaceNumber> is not member of VLAN <ID>
474 December/2018
FUJITSU PSWITCH
Error
Message Collection
Outgoing interface is not member of DAI VLAN
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<ID>
0/1, 0/0/1
ID
Failed to add ARP ACL remark
Error
DAI added ACL remark failed
Failed to allocate a buffer for ARP ACL Rule SLL list
Error
DAI ACL SLL list memory allocate failed
Failed to allocate a buffer for ARP ACL SLL list
Error
DAI ACL SLL list memory allocate failed
Failed to allocate buffer for ARP ACL (<AclName>)
Error
DAI pool buffer memory allocate failed
<AclName> ACL name
Failed to allocate buffer for ARP ACL: <AclName> (IP Address:
<IPAddress>, MAC address: <MacAddress>
Error
DAI pool buffer memory allocate failed
<AclName> ACL name
<IPAddress>
<MacAddress> ip_address, or, ipv6_address, or hostname
MAC address
Failed to allocate buffer for the ARP ACL remark: '<AclRemark>'
December/2018 475
Message Collection
Error
DAI pool buffer memory allocate failed
<AclRemark> ACL remark
Failed to create ARP ACL (<AclName>) remarks
Error
DAI create ACL remarks failed
<AclName> ACL name
FUJITSU PSWITCH
Failed to create ARP ACL remarks linked list
Error
DAI create ACL remarks linked list failed
Failed to create ARP ACL rule remarks SLL list
Error
DAI create ACL remark failed
Failed to create remarks for ARP ACL: <AclName> (IP Address:
<IPAddress>, MAC address: <MacAddress>)
Error
DAI create ACL remark failed
<AclName> ACL name
<IPAddress> ip_address, or, ipv6_address, or hostname
<MacAddress> MAC address
Failed to destroy ARP ACL (<AclName>) remarks
Error
DAI destory ACL remark failed
<AclName> ACL name
Failed to destroy ARP ACL <AclName> (IP Address: <IPAddress>, MAC address: <MacAddress>) Rule Remarks
476 December/2018
FUJITSU PSWITCH
Error
Message Collection
DAI destory ACL remark failed
<AclName> ACL name
<IPAddress>
<MacAddress> ip_address, or, ipv6_address, or hostname
MAC address
Failed to disable DAI in hardware on interface <InterfaceNumber>
Error
Disabled interface DAI in hardware failed
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to enable DAI in hardware on interface <InterfaceNumber>
Error
Enabled interface DAI in hardware failed
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to remove all ARP ACL remarks from ARP ACL rule
Error
DAI removed ACL remarks from ACL rule
Failure taking DAI queue semaphore
Error
DAI take queue semaphore failed
Failure to get Interface MAC address for <InterfaceNumber>
Error
Getting interface MAC address failed
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failure to unicast ARP Reply on interface <InterfaceNumber> in
VLAN <ID>
December/2018 477
Message Collection
Error
FUJITSU PSWITCH
Send unicast ARP reply on interface failed
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<ID>
0/1, 0/0/1
ID
Received NIM startup <NimStartupPhaseNumber> callback while in init state <State>
Error
DAI NIM startup callback function received event in init state
<NimStartupPhaseNumber> NIM startup phase number
<State> State
Unknown event message type received in the DAI thread
Error
DAI task received unknown message type event
Unknown NIM startup event <NimStartupPhaseNumber>
Error
DAI task received unknown NIM interface startup event
<NimStartupPhaseNumber> NIM startup phase number
<FileName>: <FileLineNumber>: daiIntfChangeProcess(): Received a interface callback while outside the EXECUTE state
Informational
DAI interface change callback received event while outside execute state
<FileName> Log is created by this file.
<FileLineNumber> Log is created by this line.
DAI: NIM event Enqueue failed
Informational
Send NIM event to DAI event queue failed
Failed to allocate ARP ACL remarks memory pool
478 December/2018
FUJITSU PSWITCH
Informational
DAI pool buffer memory allocate failed
Message Collection
Failed to allocate ARP ACL Rule remarks memory pool
Informational
DAI pool buffer memory allocate failed
Interface <InterfaceNumber> is D-Disabled as the rate of the incoming ARP messages on this interface exceeded the rate limit
<MaxValue> pps (burst interval <BurstInterval>)
Notice
Interface is D-Disabled as the rate of the incoming ARP messages exceed rate limit
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<MaxValue>
<BurstInterval>
Maximum value
Burst interval
DAI: ARP PKT- op <Operation>, sender mac <MacAddress>, sender ip
<IPAddress>, target mac <MacAddress>, target ip <IPAddress>
Warning
Record DAI dropped packet information
<Operation>
<MacAddress>
Operation, "Add", "Remove", "Up", "Down", "Enable",
"Disable" …
MAC address
<IPAddress> ip_address, or, ipv6_address, or hostname
User has to bring the interface <InterfaceNumber> up explicitly
December/2018 479
Message Collection
Warning
FUJITSU PSWITCH
User has to bring the interface up
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
2.1.25.
ETS
P1 failed etsIntfCfgData=<SetValue> RWlockCreate returned
<ErrorCode>
Critical
Unable to allocate memory for ETS resource, during initialization phase.
<SetValue> Set Value
<ErrorCode> Error code
P2 failed nim register rc=<ErrorCode>
Critical
ETS component cannot register with NIM, during initialization phase.
<ErrorCode> Error code
P2 failed nv register rc=<ErrorCode>
Critical
Unable to register save-restore routine with NVRAM during initialization phase.
<ErrorCode> Error code
Failed to write ets configuration to file <FileName>
Debug
Unable to save ETS configuration to NVRAM.
<FileName> Log is created by this file.
Error accessing ETS config data for interface <InterfaceNumber> in etsIntfIsConfigurable. A default configuration does not exist for this interface. Typically a case when a new interface is created and has no pre-configuration.
480 December/2018
FUJITSU PSWITCH
Error
Message Collection
There is synchronization issue between NIM and ETS component to process interface creation/deletion. A default configuration does not exist for this interface. Typically a case when a new interface is created and has no pre-configuration.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<FunctionName>: Failed applying config data to interface
<InterfaceNumber>
Informational
Unable to apply ETS configuration to CoS queues. The ETS configuration may be incompatible with CoS queues.
<FunctionName> Log is created by this function.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
ETS: Unable to apply Priority <Priority> to traffic class
<GroupID> on intf <InterfaceNumber>
Informational
Unable to apply ETS configuration to hardware.
<Priority> Priority
<GroupID> Group ID
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
etsIntfChangeCallback called outside permitted phase
Informational
Received an interface change event from NIM, but the ETS module isn't ready.
The sum of the traffic class groups advertised by ETS do not sum to 100%. Interoperability is not assured with these settings.
Informational
ETS configuration may not be appropriate with CoS queue.
Unable to get TCG maximum bandwidth config from intf
<InterfaceNumber>
December/2018 481
Message Collection
Informational
FUJITSU PSWITCH
Unable to get TCG maximum bandwidth configuration. There is synchronization issue between NIM and ETS component to process interface creation/deletion.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Unable to get TCG minimum bandwidth config from intf
<InterfaceNumber>
Informational
Unable to get TCG minimum bandwidth configuration. There is synchronization issue between NIM and ETS component to process interface creation/deletion.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Unable to get TCG scheduler type config from intf
<InterfaceNumber>
Informational
Unable to get TCG scheduler type configuration. There is synchronization issue between NIM and ETS component to process interface creation/deletion.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Unable to get TCG weight config from intf <InterfaceNumber>
Informational
Unable to get TCG weight configuration. There is synchronization issue between
NIM and ETS component to process interface creation/deletion.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Unable to set global TCG maximum bandwidth config on intf
<InterfaceNumber>
482 December/2018
FUJITSU PSWITCH
Informational
Message Collection
Unable to apply TCG maximum bandwidth configuration due to unsuitable bandwidth setting. The configuration of TCG maximum bandwidth need to check ranges.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Unable to set global TCG minimum bandwidth config on intf
<InterfaceNumber>
Informational
Unable to apply TCG minimum bandwidth configuration due to unsuitable bandwidth setting.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Unable to set global TCG scheduler type config on intf
<InterfaceNumber>
Informational
Unable to apply TCG scheduler type configuration.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Unable to set global TCG weight config on intf <InterfaceNumber>
Informational
Unable to apply TCG weight configuration due to unsuitable weight setting. The configuration of TCG weight need to check ranges.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
WRR weights are relative to other WRR queues only for TCG <GroupID>
Informational
If the TCG type is strict, the weight configuration will not apply on this TCG.
<GroupID> Group ID
invalid event event:<EventID>. <FileName>:<FileLineNumber>.
December/2018 483
Message Collection
Notice
FUJITSU PSWITCH
The ETS component receives unsupported event type. It should not happened, except software bug occur.
<EventID> Event ID
<FileName>
<FileLineNumber>
Log is created by this file.
Log is created by this line.
Neighbour disappeared on the port <InterfaceNumber>.
Notice
The LLDP TLV communication has time out. We may lost communication with peer switch.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
nimIntfQuery failed for intf <InterfaceNumber>
Warning
Unable to get interface information from NIM. There is synchronization issue between NIM and ETS component about interface information.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Incompatible configuration from neighbor is detected on the port
<InterfaceNumber>.
Warning
On specific interface, the peer's configuration is not compatible or may not supported. Check peer switch's configuration is correct or not.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Multiple neighbors are detected on the port <InterfaceNumber>.
484 December/2018
FUJITSU PSWITCH
Warning
Message Collection
Multiple neighbors have been detected. One port interface only can communicate with one peer.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
2.1.26.
EVB
Failed to create EVB CNFGR message queue.
ALERT
Failed to create EVB CNFGR message queue.
Failed to create ECP message queue.
ALERT
Failed to create ECP message queue.
Failed to create VDP message queue.
ALERT
Failed to create VDP message queue.
Failed to create ECP ulpdu tx message queue.
ALERT
Failed to create ECP ULPDU transmission message queue.
Failed to create EVB semaphore.
ALERT
Failed to create EVB semaphore.
Failed to create ECP semaphore.
ALERT
Failed to create ECP semaphore.
Failed to create VDP semaphore.
December/2018 485
Message Collection
ALERT
Failed to create VDP semaphore.
FUJITSU PSWITCH
Failed to allocate memory for VDP VSI table.
ALERT
Insufficient resources for creating VDP VSI table.
Failed to allocate memory for VDP VSI filter table.
ALERT
Insufficient resources for creating VSI filter info table.
Failed to allocate memory for ECP ULPDU TX buf.
ALERT
Insufficient resources for allocating ECP ULPDU transmitssion buffer.
Failed to allocate memory for ECPdu Tx Buf.
ALERT
Insufficient resources for allocating ECPDU transmitssion buffer.
Failed to allocate memory for ECPdu Tx Ack Buf.
ALERT
Insufficient resources for allocating acknowledge ECPDU transmitssion buffer.
Failed to allocate memory for VDP TLV Rx buf.
ALERT
Insufficient resources for allocating VDP TLV receive buffer.
Failed to allocate memory for VDP TLV Tx Buf.
ALERT
Insufficient resources for allocating VDP TLV transmission buffer.
Failed to allocate memory for EVB interface map table.
486 December/2018
FUJITSU PSWITCH
ALERT
Message Collection
Insufficient resources for creating EVB interface index map table.
Failed to allocate memory for EVB interface table.
ALERT
Insufficient resources for creating EVB interface table.
Failed to allocate memory for EVB notify list.
ALERT
Insufficient resources for allocating registered notification list.
Failed to allocate memory for ECP ack timer list.
ALERT
Insufficient resources for creating ECP acknowledge timer list.
Failed to initialize ECP ack timer.
ALERT
Failed to initialize ECP acknowledge timer.
Error allocating ECP Ack Timer handle list buffer.
ALERT
Insufficient resources for allocating ECP acknowledge timer handle list.
Unable to create ECP ack timer handle list.
ALERT
Insufficient resources for creating ECP acknowledge timer handle list.
Failed to allocate memory for VDP VSI timer list.
ALERT
Insufficient resources for allocating VDP VSI timer list.
Failed to initialize VDP VSI timer.
December/2018 487
Message Collection
ALERT
Failed to initialize VDP VSI timer.
FUJITSU PSWITCH
Error allocating VDP VSI Timer handle list buffer.
ALERT
Insufficient resources for allocating VDP VSI timer handle list.
Unable to create VDP VSI timer handle list.
ALERT
Insufficient resources for creating VDP VSI timer handle list.
Failed to create EVB task.
ALERT
Failed to create EVB task.
Unable to initialize EVB task.
ALERT
Failed to start EVB task.
Failed to create ECP task.
ALERT
Failed to create ECP task.
Unable to initialize ECP task.
ALERT
Failed to start ECP task.
Failed to create VDP task.
ALERT
Failed to create VDP task.
Unable to initialize VDP task.
488 December/2018
FUJITSU PSWITCH
ALERT
Failed to start VDP task.
Startup notify message send failed.
ALERT
Failed to send startup notify message.
Interface change notify message send failed.
ALERT
Failed to send interface change notify message.
Failed to register with nvStore rc=<ErrorCode>.
CRITICAL
Unable to register with save and restore manager.
<ErrorCode> Error code
Message Collection
Unable to register interface change callback with NIM
CRITICAL
Unable to register with NIM for interface callback functions.
EVB: notification failed for event(<EventName>), intf(<InterfaceNumber>), reason(<ErrorCode>). The event sent to
NIM was not completed successfully.
CRITICAL
NIM event notification failed.
<EventName> Event name
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<ErrorCode> Error code
EVB activates interfaces done.
December/2018 489
Message Collection
DEBUG
Process activate event finished.
FUJITSU PSWITCH
Failed to write EVB configuration to file <FileName>.
DEBUG
Failed to save binary configuration file.
<FileName> Log is created by this file.
Failed to issue cnfgr cmd <Command> request <State>.
ERROR
Failed to send EVB configuration command.
<Command> Command
<State> State
Error accessing EVB config data for interface <InterfaceNumber>,
<InterfaceNumber>.
ERROR
Incorrect EVB mapping interface index.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to send command(<EventID>) message to EVB component.
ERROR
Failed to send message to EVB queue.
<EventID> Event ID
ECP queue has not been created!
ERROR
ECP queue has not been created.
ECPDU received message send failed.
490 December/2018
FUJITSU PSWITCH
ERROR
Failed to send received ECPDU message.
Message Collection
ECP Ack timer tick message send failed.
ERROR
Failed to send ECP acknowledge timer tick message.
Failed to send message(<EventID>) to EVB ECP queue.
ERROR
Failed to send message to ECP queue.
<EventID> Event ID
VDP VSI timer tick send failed.
ERROR
Failed to send VDP VSI timer tick message.
Failed to send message(<EventID>) to VDP queue.
ERROR
Failed to send message to VDP queue.
<EventID> Event ID
Failed to register the EVB component due to lack of resources.
ERROR
Insufficient resources for registering component.
EVB queue has not been created!
ERROR
EVB queue has not been created.
Failed to create EVB interface <InterfaceNumber>, as interface phase <EventName>(<NimStartupPhaseNumber>) processing has failed. ret=<ErrorCode>.
December/2018 491
Message Collection
ERROR
FUJITSU PSWITCH
Failed to create EVB interface.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<EventName>
0/1, 0/0/1
Event name
<NimStartupPhaseNumber> NIM startup phase number
<ErrorCode> Error code
Failed to process phase <EventName>(<NimStartupPhaseNumber>) on interface <InterfaceNumber>, as EVB interface configuration apply as failed. ret=<ErrorCode>.
ERROR
Failed to apply interface configuration while processing activate event.
<EventName> Event name
<NimStartupPhaseNumber> NIM startup phase number
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<ErrorCode>
0/1, 0/0/1
Error code
Failed to delete EVB interface <InterfaceNumber>, as interface event <EventName>(<EventID>) processing has failed. ret=<ErrorCode>.
ERROR
Failed to delete EVB interface.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<EventName>
<EventID>
<ErrorCode>
0/1, 0/0/1
Event name
Event ID
Error code
Failed to activate EVB interface <InterfaceNumber>, as interface event <EventName>(<EventID>) processing has failed. ret=<ErrorCode>.
492 December/2018
FUJITSU PSWITCH
ERROR
Message Collection
Failed to activate EVB interface.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<EventName>
<EventID>
<ErrorCode>
0/1, 0/0/1
Event name
Event ID
Error code
Failed to deactivate EVB interface <InterfaceNumber>, as interface event <EventName>(<EventID>) processing has failed. ret=<ErrorCode>.
ERROR
Failed to deactivate EVB interface.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<EventName>
<EventID>
<ErrorCode>
0/1, 0/0/1
Event name
Event ID
Error code
Failed to process event <EventName>(<EventID>) on interface
<InterfaceNumber>, as EVB interface configuration apply as failed. ret=<ErrorCode>.
ERROR
Failed to attach EVB interface.
<EventName> Event name
<EventID> Event ID
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<ErrorCode>
0/1, 0/0/1
Error code
Failed to process event <EventName>(<EventID>) on interface
<InterfaceNumber>, as EVB interface configuration remove as failed. ret=<ErrorCode>.
December/2018 493
Message Collection
ERROR
FUJITSU PSWITCH
Failed to detach EVB interface.
<EventName> Event name
<EventID> Event ID
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<ErrorCode>
0/1, 0/0/1
Error code
VDP queue has not been created!
ERROR
VDP queue has not been created.
Failed to enable EVB interface(<InterfaceNumber>) settings in driver configure layer.
ERROR
Failed to enable EVB UAP interface settings in driver configure layer.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to disable EVB interface(<InterfaceNumber>) settings in driver configure layer.
ERROR
Failed to disable EVB UAP interface settings in driver configure layer.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to get LLDP TLV buffer.
ERROR
Insufficient resources for LLDP TLV.
Failed to write EVB TLV(s) for interface <InterfaceNumber>.
494 December/2018
FUJITSU PSWITCH
ERROR
Message Collection
Failed to write local EVB TLV information in buffer for interface.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to delete SCID/SVID(<SchannelId>/<VlanID>) channel on UAP interface <InterfaceNumber> in driver configure layer.
ERROR
Failed to delete SCID/SVID channel on UAP interface in driver configure layer.
<SchannelId> Scannel ID
<VlanID> VLAN ID
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to add SCID/SVID(<SchannelId>/<VlanID>) channel on UAP interface <InterfaceNumber> in driver configure layer.
ERROR
Failed to add SCID/SVID channel on UAP interface in driver configure layer.
<SchannelId> Scannel ID
<VlanID> VLAN ID
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to send ECP ULPDU to ECP Tx queue.
ERROR
Failed to send ECP ULPDU to ECP transmission queue.
Failed to send ECP message to ECP queue.
ERROR
Failed to send message to ECP queue.
Failed to get ECP ULPDU Tx buffer.
ERROR
Insufficient resources for ECP ULPDU.
Failed to get system network buffer.
December/2018 495
Message Collection
ERROR
Insufficient resources for system network buffer.
FUJITSU PSWITCH
Failed to get VDP VSI filter buffer.
ERROR
Insufficient resources for VDP VSI filter info.
Failed to delete VSI type <VsiIdType> id <VsiId> on interface
<InterfaceNumber>. VSI entry not found.
ERROR
VSI entry is not found in VSI table while deleteing VSI entry.
<VsiIdType> 1(IPv4), 2(IPv6), 3(MAC), 4(Local), 5(UUID)
<VsiId> VSI identifier
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to get VDP TLV Tx buffer.
ERROR
Insufficient resources for recording VDP TLV.
Failed to reserve resource for VSI filter(group
<VdpFilterGroupId>, vlan <VlanID>, mac <MacAddress>) configuration on interface <InterfaceNumber>.
ERROR
Failed to reserve resource for VSI filter configuration on interface.
<VdpFilterGroupId> VLAN identifier
<VlanID> VLAN ID
<MacAddress> MAC address
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to apply VSI filter(group <VdpFilterGroupId>, vlan
<VlanID>, mac <MacAddress>) configuration on interface
<InterfaceNumber>.
496 December/2018
FUJITSU PSWITCH
ERROR
Message Collection
Failed to apply VSI filter configuration on interface.
<VdpFilterGroupId> VLAN identifier
<VlanID>
<MacAddress>
VLAN ID
MAC address
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Unable to register for LLDP Pdu notification callback for NNTPMRB agent.
INFO
Unable to register with LLDP for LLDPDU notification callback function.
Unable to register for LLDP Pdu notification callback for NCB agent.
INFO
Unable to register with LLDP for LLDPDU notification callback function.
Received an interface change callback while not ready to receive it.
INFO
EVB is not ready.
Received an interface change callback while not ready to receive it.
INFO
EVB is not ready.
Failed to get the MAC address of interface <InterfaceNumber>.
INFO
Failed to get MAC address for interface.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to create systerm interface for s-channel.
December/2018 497
Message Collection
INFO
Failed to create systerm interface for s-channel.
FUJITSU PSWITCH
Failed to notify link down event for interface <InterfaceNumber>.
INFO
Failed to notify link down event for interface.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to notify create event for interface <InterfaceNumber>.
INFO
Failed to notify create event for interface.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failure register with sysnet for ECP packets.
NOTICE
Unable to register with sysnet for ECP packet notification callback function.
Unknown VSI ID Type(<VsiIdType>) indicated.
NOTICE
Invalid VSI ID type.
<VsiIdType> 1(IPv4), 2(IPv6), 3(MAC), 4(Local), 5(UUID)
Invalid key length in VSI entry compare process.
NOTICE
The length of compared entry is Invalid.
Failed to query data for intf <InterfaceNumber>.
498 December/2018
FUJITSU PSWITCH
NOTICE
Message Collection
Failed to check specific NIM interface is attached.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Registrar ID <ComponentID> is greater than last component ID.
NOTICE
Invalid component ID.
<ComponentID> Component ID
Unknown EVB event(<EventID>) indicated.
NOTICE
Invalid EVB event sent.
<EventID> Event ID
Unknown EVB event(<EventID>) received.
NOTICE
Invalid EVB event received.
<EventID> Event ID
Unsupport interface <InterfaceNumber> event
<EventName>(<EventID>) received.
NOTICE
Unsupport interface change event received.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<EventName>
<EventID>
0/1, 0/0/1
Event name
Event ID
Unknown ECP event(<EventID>) indicated.
NOTICE
Invalid ECP event sent.
<EventID> Event ID
Unknown ECP event(<EventID>) received.
December/2018 499
Message Collection
NOTICE
Invalid ECP event received.
<EventID> Event ID
Unknown VDP event(<EventID>) indicated.
NOTICE
Invalid VDP event sent.
<EventID> Event ID
FUJITSU PSWITCH
Unknown VDP event(<EventID>) received.
NOTICE
Invalid VDP event received.
<EventID> Event ID
Reflect Relay enabled on interface <InterfaceNumber>.
NOTICE
Reflect Relay enabled on interface.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Reflect Relay disabled on interface <InterfaceNumber>.
NOTICE
Reflect Relay disabled on interface.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
System interface <InterfaceNumber> for S-channel created.
NOTICE
System interface for S-channel created.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
System interface <InterfaceNumber> for S-channel deleted.
500 December/2018
FUJITSU PSWITCH
NOTICE
Message Collection
System interface for S-channel deleted.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Remove SCID/SVID(<SchannelId>/<VlanID>) channel on UAP interface
<InterfaceNumber>.
NOTICE
Remove SCID/SVID channel on UAP interface.
<SchannelId> Scannel ID
<VlanID> VLAN ID
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Add SCID/SVID(<SchannelId>/<VlanID>) channel on UAP interface
<InterfaceNumber>.
NOTICE
Add SCID/SVID channel on UAP interface.
<SchannelId> Scannel ID
<VlanID> VLAN ID
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Delete VSI filter(group <VdpFilterGroupId>, vlan <VlanID>, mac
<MacAddress>) for VSI type <VsiIdType> id <VsiId> on interface
<InterfaceNumber>.
NOTICE
VSI filter is deleted for VSI on interface.
<VdpFilterGroupId> VLAN identifier
<VlanID> VLAN ID
<MacAddress>
<VsiIdType>
MAC address
1(IPv4), 2(IPv6), 3(MAC), 4(Local), 5(UUID)
<VsiId> VSI identifier
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Add VSI filter(group <VdpFilterGroupId>, vlan <VlanID>, mac
<MacAddress>) for VSI type <VsiIdType> id <VsiId> on interface
<InterfaceNumber>.
December/2018 501
Message Collection
NOTICE
FUJITSU PSWITCH
VSI filter is added for VSI on interface.
<VdpFilterGroupId> VLAN identifier
<VlanID>
<MacAddress>
<VsiIdType>
<VsiId>
VLAN ID
MAC address
1(IPv4), 2(IPv6), 3(MAC), 4(Local), 5(UUID)
VSI identifier
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Delete VSI type <VsiIdType> id <VsiId> on interface
<InterfaceNumber>.
NOTICE
VSI is deleted on interface.
<VsiIdType> 1(IPv4), 2(IPv6), 3(MAC), 4(Local), 5(UUID)
<VsiId> VSI identifier
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Create VSI type <VsiIdType> id <VsiId> on interface
<InterfaceNumber>.
NOTICE
VSI is created on interface.
<VsiIdType> 1(IPv4), 2(IPv6), 3(MAC), 4(Local), 5(UUID)
<VsiId> VSI identifier
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to retrieve ECP ack timer handle.
WARNING
Failed to retrieve ECP interface node from timer handle.
Could not get the handle node to store the expiry ECP ask timer data.
502 December/2018
FUJITSU PSWITCH
WARNING
Message Collection
Failed not get the handle node to store the expiry ECP ask timer data.
Could not start ECP Ack timer for interface <InterfaceNumber>.
WARNING
Failed to start ECP acknowledge timer for interface.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to retrieve VDP VSI timer handle.
WARNING
Failed to retrieve VDP VSI node from timer handle.
Could not get the handle node to store the expiry VDP VSI timer data.
WARNING
Failed not get the handle node to store the expiry VDP VSI timer data.
Could not start VDP VSI timer for VSI type <VsiIdType> id <VsiId>.
WARNING
Failed to start VDP VSI timer.
<VsiIdType> 1(IPv4), 2(IPv6), 3(MAC), 4(Local), 5(UUID)
<VsiId> VSI identifier
Could not restart VDP VSI timer for VSI type <VsiIdType> id <VsiId>.
WARNING
Failed to restart VDP VSI timer.
<VsiIdType> 1(IPv4), 2(IPv6), 3(MAC), 4(Local), 5(UUID)
<VsiId> VSI identifier
Failed to create VSI type <VsiIdType> id <VsiId> on interface
<InterfaceNumber>. VSI table is full.
December/2018 503
Message Collection
WARNING
FUJITSU PSWITCH
Insufficient resources for creating VDP VSI entry.
<VsiIdType> 1(IPv4), 2(IPv6), 3(MAC), 4(Local), 5(UUID)
<VsiId> VSI identifier
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Not enough VLAN entries for this VDP command.
WARNING
Insufficient resources of VLAN entries for this VDP request command.
Not enough FDB entries for this VDP command.
WARNING
Insufficient resources of FDB entries for this VDP request command.
Not enough VSI entries for this VDP command.
WARNING
Insufficient resources for creating VDP VSI entry.
2.1.27.
FDB
Failed to create FDB VPC Age tasks.
Alert
Failed to create FDB VPC age task during FDB MLAG init
Failed to create FDB VPC tasks.
Alert
Failed to create FDB VPC task during FDB MLAG init
Failure getting the forwarding database ID for fid <FdbID>.
504 December/2018
FUJITSU PSWITCH
Debug
Failed to get FDB ID, currently it is equal to vlan ID
<FdbID> FDB ID
Message Collection
fdbDelete: received delete for unexpected FDB entry:
"(<MacAddress> - <VlanID>)."
Debug
Unable to get specific FDB entry mac address for deletion
<MacAddress> MAC address
<VlanID> VLAN ID
ERROR: Failed to register with VPC peer messages.
Error
Failed to register with VPC peer messages during FDB MLAG phase 2 init
Failed to send <EventName> event to fdbMlagTask.
Error
Failed to send MLAG role change callback event to fdbMlagTask
<EventName> Event name
Failed to send <FdbMlagEventTypeString> event on interface
<InterfaceNumber> to fdbMlagTask.
Error
Failed to send MLAG interface event to fdbMlagTask
<FdbMlagEventTypeString> "L7_FDB_MLAG_INTF_DOWN",
"L7_FDB_MLAG_INTF_UP", ...
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to send aging timer expiry event to fdbMlagAgeTask.
Error
Failed to send aging timer expiry event to fdbMlagAgeTask
Failed to send L7_FDB_MLAG_SYNC_INTF_ENTRIES on interface
<InterfaceNumber> to fdbMlagTask.
December/2018 505
Message Collection
Error
FUJITSU PSWITCH
Failed to transmit FDB control message to peer to sync FDB entries on specific
MLAG interface
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to transmit FDB control message to peer to flush all FDB entries.
Error
Failed to transmit FDB control message to peer to flush all FDB entries
Failed to transmit FDB control message to peer to flush FDB entries by Vlan <VlanID> and Port <InterfaceNumber>.
Error
Failed to transmit FDB control message to peer to flush FDB entries by vlan ID and port
<VlanID> VLAN ID
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to transmit FDB control message to peer to flush FDB entries on <InterfaceNumber>.
Error
Failed to transmit FDB control message to peer to flush FDB entries by port
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to transmit FDB control message to peer to flush FDB entries on all MLAG interfaces on VLAN <VlanID>.
Error
Failed to transmit FDB control message to peer to flush FDB entries on all MLAG interfaces by vlan ID
<VlanID> VLAN ID
Failed to transmit FDB control message to peer to flush FDB entries with mac <MacAddress>.
506 December/2018
FUJITSU PSWITCH
Error
Message Collection
Failed to transmit FDB control message to peer to flush FDB entries by mac address
<MacAddress> MAC address
Failure getting the forwarding database ID for fid <FdbID>.
Error
Failed to get FDB ID, currently it is equal to vlan ID
<FdbID> FDB ID
Failure to set fid <FdbID> address aging timeout to <TimeValue>.
Unable to set the age time in the hardware.
Error
Failed to set aging timeout on specific FDB ID
<FdbID> FDB ID
<TimeValue> Time Value
<FunctionName>:Port-security violation on the intf
<InterfaceNumber> mac=<MacAddress> vlan=<VlanID> static count
<CountValue> dynamic count <CountValue>.
Notice
Unable to register to NVRAM save routines during FDB phase 2 init
<FunctionName> Log is created by this function.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<MacAddress>
<VlanID>
<CountValue>
0/1, 0/0/1
MAC address
VLAN ID
Count Value
Error accessing PML config data for interface <InterfaceNumber> in pmlMapIntfIsConfigurable. A default configuration does not exist for this interface.
December/2018 507
Message Collection
Notice
FUJITSU PSWITCH
Unable to register to DTL for address changes call back during FDB phase 2 init
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Error on call to osapiFsWrite routine on config file <FileName>.
Notice
Unable to save FDB config data to system config file
<FileName> Log is created by this file.
Failed to transmit FDB control message to peer to flush FDB entries on all MLAG interfaces on VLAN <VlanID>.
Notice
Unable to allocate memory resource during FDB phase 1 init
<VlanID> VLAN ID
FDB Task: Failed to create, exiting....
Notice
Failed to get FDB message queue during task process
FDB: Could not add fdb entry.
Notice
Unable to add FDB entry on specific NIM interface
FDB: Could not get the VL Type.
Notice
Unable to get FDB VL type (SVL or IVL) for FDB entry process
FDB: Failed to delete fdb entry.
Notice
Unable to delete FDB entry on specific NIM interface
FDB: failed to get interface type for intf <InterfaceNumber> on
L7_ATTACH.
508 December/2018
FUJITSU PSWITCH
Notice
Message Collection
Failed to get specific NIM interface type for FDB entry process
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
FDB: Unable to allocate resources.
Notice
Failed to allocate memory resource during FDB MLAG phase 1 init
FDB: Unable to register for VLAN change callback.
Notice
Unable to register for VLAN changes callback during FDB phase 2 init
FDB: Unable to register to NIM for port create.
Notice
Unable to register to NIM interface changes callback during FDB phase 2 init
FDB:interface <InterfaceNumber> has no mac address.
Notice
Unable to get specific NIM interface mac address for FDB entry process
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
FILTER: dtl filter delete failure for vlanid <VlanID> mac
<MacAddress>.
Notice
Failed to create FDB main task during FDB phase 1 init
<VlanID> VLAN ID
<MacAddress> MAC address
nimIntfQuery failed for intf <InterfaceNumber>.
December/2018 509
Message Collection
Notice
FUJITSU PSWITCH
Failed to check specific NIM interface is attached
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
2.1.28.
FILTER
MAC Filter <MacAddress> vlan <VlanID> does not exists.
Debug
Failed to get specific static filter entry by mac address and vlan ID
<MacAddress> MAC address
<VlanID> VLAN ID
Failed to add MAC Filter <MacAddress> vlan <VlanID> to hardware.
Error
Failed to add specific static filter entry by mac address and vlan ID
<MacAddress> MAC address
<VlanID> VLAN ID
filterAdminModeApply: failed to apply VLAN configuration.
Error
Unable to set static filter configured vlan admin mode to HW
filterAdminModeApply: failed to apply VLAN PFM.
Error
Unable to set static filter default vlan admin mode to HW
dot1qApiQueueSynchronize failed.
Notice
Unable to sync dot1qApiQueue by static filter vlan ID
Error on call to filterMapIntfIsConfigEntryGet routine outside the EXECUTE state.
510 December/2018
FUJITSU PSWITCH
Notice
Unable to get valid NIM config ID by static filter map interface
Message Collection
Error on call to filterMapIntfIsConfigurable routine outside the
EXECUTE state.
Notice
Unable to get valid static filter map interface config because phase init is not finished
Filter unable to register for Vlan Change callback.
Notice
Unable to register for VLAN changes callback during static filter phase 2 init
FILTER: dtl filter delete failure for vlanid <VlanID> mac
<MacAddress>.
Notice
Unable to delete static filter by specific vlan ID with mac address
<VlanID> VLAN ID
<MacAddress> MAC address
Filter: Unable to allocate resources.
Notice
Unable to allocate memory resource during static filter phase 1 init
Filter: Unable to register with NIM.
Notice
Unable to register to NIM interface changes callback during static filter phase 2 init
Filter: Unable to register with nvStore.
Notice
Unable to register to NVRAM save routines during static filter phase 2 init
filterCnfgrFiniPhase1Process: could not delete avl semaphore.
December/2018 511
Message Collection
Notice
FUJITSU PSWITCH
Unable to delete avl semaphore during static filter finish phase 1 init
filterSave: Error on call to sysapiCfgFileWrite routine on file
<FileName>.
Notice
Unable to save static filter config data to system config file
<FileName> Log is created by this file.
filterVlanCallback:Could not create filter for macaddr
<MacAddress> , vlan <VlanID>.
Notice
Unable to create static filter for specific mac address and vlan ID
<MacAddress> MAC address
<VlanID> VLAN ID
filterVlanChangeCallback is deregistered.
Notice
Unable to process for VLAN changes callback because it is deregistered
mfdbVlanAdd: failed to apply VLAN <VlanID> PFM configuration.
Notice
Unable to set static filter configured vlan mcast flood mode to HW
<VlanID> VLAN ID
mfdbVlanAdd: failed to apply VLAN <VlanID> PFM default.
Notice
Unable to set static filter default vlan mcast flood mode to HW
<VlanID> VLAN ID
Rcvd a vlan callback in incorrect state <State> vlan <VlanID> event
<ID> intf <InterfaceNumber>.
512 December/2018
FUJITSU PSWITCH
Notice
Message Collection
Unable to process for VLAN changes callback because phase init is not finished
<State> State
<VlanID>
<ID>
VLAN ID
ID
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Vlan <VlanID> does not exist . Cannot create static filter.
Notice
Unable to create static filter by invalid vlan ID with mac address
<VlanID> VLAN ID
Invalid interface <InterfaceNumber> used to configure source port of mac filter "<MacAddress> vlan <VlanID>".
Warning
Unable to get valid interface to configure static filter
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<MacAddress>
<VlanID>
MAC address
VLAN ID
Maximum number of interfaces configured as source interfaces.
Maximum allowed <MaxValue>, requested <CountValue>.
Warning
Unable to configure static filter entry because maximum number of interfaces
<MaxValue> Maximum value
<CountValue> Count Value
Maximum number of static multicast MAC Filters configured.
"Maximum allowed are <MaxValue>".
December/2018 513
Message Collection
Warning
FUJITSU PSWITCH
Unable to configure static filter entry because maximum number of entries
<MaxValue> Maximum value
2.1.29.
FIP_SNOOPING
Failed to send NIM startup phase <ID> to FIP snooping thread.
Alert
Failed to send NIM startup phase message to FIP snooping queue.
<ID> ID
Failure creating FIP snooping message queue semaphore.
Alert
Failed to create FIP snooping message queue semaphore. This semaphore is given whenever a message is added to any of the 4 message queues for the FIP snooping thread. Taken when a message is read.
Failure sending FIP snooping configurator init message.
Alert
Failure sending FIP snooping configurator init message to FIP snooping event queue.
FIP snooping failed to register for DCBX callback.
Alert
Failed to register for DCBX events callback for handling Application (FCoE) TLV in phase 2 init.
FIP snooping failed to register for VLAN changes.
Alert
Failed to register for VLAN changes to get notifications for vlan delete and port membership change eventsin phase 2 init.
FIP snooping unable to create events queue.
514 December/2018
FUJITSU PSWITCH
Alert
Failed to create queue for FIP snooping event.
Message Collection
FIP snooping unable to create KeepAlive queue.
Alert
Failed to create queue for KeepAlive and discovery advertisement messages.
FIP snooping unable to create sessions queue.
Alert
Failed to create queue for FIP session packets.
FIP snooping unable to create timer events queue.
Alert
Failed to create queue for FIP snooping timer event.
Received unknown NIM intIfState <State>.
Alert
Received unknown NIM interface State when parsing NIM startup phase message.
<State> State
Unable to create FIP KeepAlive thread.
Alert
Failed to create FIP KeepAlive task.
Unable to create FIP snooping thread.
Alert
Failed to create FIP snooping task.
Failed to register interface change callback with NIM.
Critical
Failed to register interface change callback with NIM in phase 2 init.
fsCnfgrInitPhase2Process: Failed to register with nvStore.
December/2018 515
Message Collection
Critical
Failed to register with nvStore in phase 2 init.
FUJITSU PSWITCH
Unable to create read/write lock for FIP snooping.
Critical
Failed to create read/write lock for FIP snooping. Read/Write lock protect component data since processing occurs on multiple threads(FIP thread, UI thread, etc).
<MacType>: <MacAddress> static FDB entry added on interface
<InterfaceNumber> in VLAN <ID>.
Debug
Add the static MAC address to FDB.
<MacType> "FCF MAC", "Session MAC", "ENode MAC"
<MacAddress> MAC address
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<ID>
0/1, 0/0/1
ID
<MacType>: <MacAddress> static FDB entry deleted on interface
<InterfaceNumber> in VLAN <ID>.
Debug
Delete the static MAC address from FDB.
<MacType> "FCF MAC", "Session MAC", "ENode MAC"
<MacAddress> MAC address
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<ID> ID
ENode Clear Virtual Link received on interface <InterfaceNumber> in VLAN <ID>, ENode MAC: <MacAddress>, FCF MAC: <MacAddress>.
516 December/2018
FUJITSU PSWITCH
Debug
Message Collection
Log information for receiving Clear Virtual Link from FCF with no Vx_port descriptors.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<ID>
<MacAddress>
0/1, 0/0/1
ID
MAC address
ENode entry created on interface <InterfaceNumber> in VLAN <ID>,
Enode MAC: <MacAddress>.
Debug
This message will be shown when adding L2 entry for ENode MAC into FDB.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<ID>
<MacAddress>
0/1, 0/0/1
ID
MAC address
Failed to queue FIP frame to FIP snooping session/fka queue.
Debug
Failed to queue the packets like VL creation/deletion messages into the session queue.
Failed to write fip snooping configuration to file <FileName>.
Debug
Failed to write FIP snooping configuration to file.
<FileName> Log is created by this file.
FCF entry created on interface <InterfaceNumber> in VLAN <ID>, FCF
MAC: <MacAddress>, Name Identifier <ID>, Fabric Name <FabricName>,
ADV Period <TimeValue> msec, Priority <ID>, D-Bit <TrueOrFalse>,
A-bit <TrueOrFalse>, <Capability> capable.
December/2018 517
Message Collection
Debug
FUJITSU PSWITCH
Log information for creating entry on the specific interfaces when processing the
Discovery Advertisements which sent by FCF.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<ID>
<MacAddress>
<FabricName>
<TimeValue>
<TrueOrFalse>
<Capability>
0/1, 0/0/1
ID
MAC address
Fabric name
Time Value
String; "True", "False"
"FPMA", "SPMA" for FIP Snooping / "LEAF", "PRUNE", "GENID",
"MTRACE" for DVMRP
FIP <TypeValue> session ACCEPTED on interface <InterfaceNumber> in VLAN <ID> FCF MAC: <MacAddress>, ENode MAC: <MacAddress>, FCoE
MAC: <MacAddress>, tentative index <ID>.
Debug
Log information for processing FLOGI ACCEPT packets.
<TypeValue> Type Value
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<ID>
<MacAddress>
ID
MAC address
"FIP <TypeValue> session LOGOUT accepted on interface
<InterfaceNumber> in VLAN <ID>. FCF MAC: <MacAddress>, ENode MAC:
<MacAddress>, FCoE MAC: <MacAddress>."
Debug
Log information for processing FLOGO ACCEPT packets.
<TypeValue> Type Value
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<ID>
<MacAddress>
0/1, 0/0/1
ID
MAC address
"FIP <TypeValue> session REJECTED on interface <InterfaceNumber> in VLAN <ID> FCF MAC: <MacAddress>, ENode MAC: <MacAddress>, FCoE
MAC: <MacAddress>, tentative index <ID>."
518 December/2018
FUJITSU PSWITCH
Debug
Message Collection
Log information for processing REJECTED for FLOGI, FDISC, or FLOGO packets.
<TypeValue> Type Value
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<ID>
<MacAddress>
ID
MAC address
Invalid event (<ID>) received. No action taken.
Debug
Invalid FIP snooping event ID received.
<ID> ID
Successfully changed the interface <InterfaceNumber> max frame size to <MaxValue>.
Debug
Log information for changing the max frame size on the specific interface successfully.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<MaxValue>
0/1, 0/0/1
Maximum value
VN Port <TypeValue> sessions's Clear Virtual Link received on interface <InterfaceNumber> in VLAN <ID> ENode MAC: <MacAddress>,
FCF MAC: <MacAddress>, FCoE MAC: <MacAddress>.
Debug
Log notification for receiving VN port sessions's Clear Virtual Link.
<TypeValue> Type Value
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<ID>
<MacAddress>
ID
MAC address
Attempted to start the FIP snooping FKA timer while timer already running.
December/2018 519
Message Collection
Error
Error when starting the FIP Snooping timer.
FUJITSU PSWITCH
Cannot find new FIP snooping ENode entry.
Error
Failed to find new FIP snooping ENode entry while adding an entry to the ENodes table.
Cannot find new FIP snooping FCF entry.
Error
Failed to fine new FIP snooping FCF entry while adding an entry to the FCFs table.
Cannot find new FIP snooping session entry.
Error
Failed to find new FIP snooping session entry while adding an entry to the sessions table.
Cannot set the the max frame size parameter on interface
<InterfaceNumber>.
Error
Log information for changing the max frame size on the specific interface failed.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to add <InterfaceNumber> as ENode port to vlan <ID> in h/w.
Error
Failed to add a specific interface as Enode port to VLAN to hardware.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<ID> ID
Failed to add <InterfaceNumber> as FCF facing port to vlan <ID> in h/w.
520 December/2018
FUJITSU PSWITCH
Error
Message Collection
Failed to add a specific interface as FCF facing port to VLAN to hardware.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<ID>
0/1, 0/0/1
ID
Failed to add to h/w the FIP <TypeValue> session on interface
<InterfaceNumber> in VLAN <ID> ENode MAC: <MacAddress>
Error
Failed to add FIP session on specific interface.
<TypeValue> Type Value
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<ID>
<MacAddress>
0/1, 0/0/1
ID
MAC address
Failed to disable ENode port mask on VLAN <ID> in h/w.
Error
Failed to disable Enode port mask on VLAN to hardware.
<ID> ID
Failed to disable FCF port mask on VLAN <ID> in h/w.
Error
Failed to disable FCF port mask on VLAN to hardware.
<ID> ID
Failed to disable FIP snooping on VLAN <ID> in h/w.
Error
Failed to disable FIP snooping on VLAN to hardware.
<ID> ID
Failed to disable interface <InterfaceNumber> on a FIP snooping disabled VLAN <ID>.
December/2018 521
Message Collection
Error
FUJITSU PSWITCH
Failed to disabled the specific interface on a FIP snooping disabled VLAN.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<ID>
0/1, 0/0/1
ID
Failed to enable FIP snooping (ENode port mask) on VLAN <ID> in h/w.
Error
Failed to enable FIP snooping (ENode port mask) on VLAN to hardware.
<ID> ID
Failed to enable FIP snooping on VLAN <ID> in h/w.
Error
Failed to enable FIP snooping on VLAN to hardware.
<ID> ID
Failed to enable interface <InterfaceNumber> on a FIP snooping disabled VLAN <ID>.
Error
Failed to enable a specific interface on a FIP snooping disabled VLAN.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<ID>
0/1, 0/0/1
ID
Failed to get interface <InterfaceNumber> max frame size.
Error
Failed to get max frame size on the specific interface when setting the interface
MTU to be 2500 bytes to enable FIP and FCoE jumbo frames.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to remove <InterfaceNumber> as ENode port in vlan <ID> in h/w.
522 December/2018
FUJITSU PSWITCH
Error
Message Collection
Failed to remove the specific interface as Enode port in VLAN to hardware.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<ID>
0/1, 0/0/1
ID
Failed to remove <InterfaceNumber> as FCF facing port in vlan <ID> in h/w.
Error
Failed to remove the specific interface as FCF facing port in VLAN to hardware.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<ID> ID
Failed to set FC-MAP (<SetValue>) on vlan <ID>. FC-MAP configuration is not allowed when FIP snooping is enabled in the vlan. Disable FIP snooping on vlan <ID> and proceed with FC-MAP configuration. Re-enable FIP snooping on vlan <ID> following the
FC-MAP configuration.
Error
Deny FC-MAP set if FIP snooping is enabled in the vlan.
<SetValue> Set Value
<ID> ID
Failed to set FC-MAP on VLAN <ID> in h/w.
Error
Faild to set FC-MAP on VLAN to hardware.
<ID> ID
Failed to set FCF port mask on VLAN <ID> in h/w.
Error
Failed to set FCF port mask on VLAN to hardware.
<ID> ID
Failed to set Vlan Notification port mask on VLAN <ID> in h/w.
December/2018 523
Message Collection
Error
FUJITSU PSWITCH
Failed to set VLAN Notification port mask on VLAN to hardware.
<ID> ID
Failed to unset Vlan Notification port mask on VLAN <ID> in h/w.
Error
Failed to tell hardware to deny forwarding of VLAN notification messages sent by
FCFs in the VLAN on the FCF trusted ports.
<ID> ID
FIP snooping event queue is NULL when processing Interface change.
Error
FIP snooping event queue is NULL when processing Interface change.
FIP snooping event queue is NULL when processing VLAN change.
Error
FIP snooping event queue is NULL when processing VLAN change.
FIP snooping failed to register with Sysnet.
Error
Failed to register FIP snooping with Sysnet.
FIP snooping received an interface change callback for event <ID> on interface <InterfaceNumber> during invalid initialization phase.
Error
FIP snooping received an interface change callback for event on the specific interface during invalid initialization phase.
<ID> ID
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Received FIP packet on an invalid interface <InterfaceNumber>.
524 December/2018
FUJITSU PSWITCH
Error
Message Collection
Received FIP snooping packet on an invalid interface when handling FIP snooping event.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Received NIM startup <ID> callback while in init state <State>.
Error
Received NIM startup callback while in init state.
<ID> ID
<State> State
Unable to allocate the FIP snooping ENodes table data heap.
Error
Error to allocate the FIP snooping Enodes table when creating the ENodes database.
Unable to allocate the FIP snooping ENodes table.
Error
Error to allocate the FIP snooping Enodes table when creating the ENodes database.
Unable to allocate the FIP snooping fcfs table data heap.
Error
Error to allocate the FIP snooping FCFs table when creating the FCFs database.
Unable to allocate the FIP snooping fcfs table.
Error
Error to allocate the FIP snooping FCFs table when creating the FCFs database.
Unable to allocate the FIP snooping sessions table.
December/2018 525
Message Collection
Error
Error to allocate the FIP snooping sessions table.
FUJITSU PSWITCH
Unknown event message type received in the FIP snooping thread.
Error
Log information for receiving unknown event message type in the FIP snooing thread.
Unknown NIM startup event <EventID>.
Error
Log information for receiving unknown NIM startup event in FIP snooping process.
<EventID> Event ID
<FileName>: <FileLineNumber>: fsIntfChangeProcess(): Received a interface callback while outside the EXECUTE state.
Informational
Receiving a interface callback while outside the EXECUTE state.
<FileName> Log is created by this file.
<FileLineNumber> Log is created by this line.
Error accessing FIP snooping config data for interface
<InterfaceNumber> in fsIntfInfoGet.
Informational
Failed to access FIP snoopig config data for the specific interface.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Error accessing FIP snooping config data for interface
<InterfaceNumber> in fsIntfIsConfigurable.
Informational
Failed to access FIP snoopig config data for the specific interface.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to add FCF MAC: <MacAddress> to h/w on interface
<InterfaceNumber> in VLAN <VlanID>
526 December/2018
FUJITSU PSWITCH
Informational
Message Collection
Failed to add the FCF MAC address to the hardware on the specific interface and
VLAN.
<MacAddress> MAC address
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<VlanID> VLAN ID
Failed to add to h/w ENode MAC: <MacAddress> on interface
<InterfaceNumber> in VLAN <VlanID>.
Informational
Failed to add l2 entry for ENode MAC into FDB.
<MacAddress> MAC address
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<VlanID> VLAN ID
Failed to change the interface <InterfaceNumber> max frame size to <SizeValue>.
Informational
Log information for changing the max frame size on the specific interface failed.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<SizeValue> An integer for a specific range or a limit value.
Failed to delete from h/w ENode MAC: <MacAddress> on interface
<InterfaceNumber> in VLAN <VlanID>.
Informational
Failed to delete l2 entry for Enode MAC from FDB.
<MacAddress> MAC address
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<VlanID> VLAN ID
Failed to move FCF with MAC: <MacAddress> in h/w from interface
<InterfaceNumber> onto interface <InterfaceNumber> in VLAN
<VlanID>.
December/2018 527
Message Collection
Informational
FUJITSU PSWITCH
Failed to move FCF MAC address in the VLAN in h/w, it is called when FCF node moved from one interface to another.
<MacAddress> MAC address
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<VlanID> VLAN ID
FCF with MAC: <MacAddress> moved from interface <InterfaceNumber> onto interface <InterfaceNumber> in VLAN <VlanID>.
Informational
Log information for indicating the FCF move to a different port in the VLAN following an STP topology change. It update all the associcate sessions about this new FCF interface.
<MacAddress> MAC address
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<VlanID> VLAN ID
FIP snooping: NIM event enqueue failed.
Informational
Send NIM event to queue failed.
FLOGI received again from ENode MAC <MacAddress> on interface
<InterfaceNumber> in VLAN <VlanID>. Purging all the sessions from this ENode in this VLAN.
Informational
Log information for receiving FLOGI again from ENode MAC on the specific interface with the specific VLAN ID. Purging all the sessions from this ENode in this
VLAN.
<MacAddress> MAC address
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<VlanID>
0/1, 0/0/1
VLAN ID
Configuration received from FCoE neighbor on port
<InterfaceNumber> is not compatible. Check whether FIP snooping feature is enabled.
528 December/2018
FUJITSU PSWITCH
Notice
Message Collection
Determines if FCoE priority information from a potential configuration source is compatible with the system.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Deletig FCF entry on interface <InterfaceNumber> in VLAN <VlanID>,
FCF MAC: <MacAddress>, received with FC-MAP <MacAddress> different from configured FC-MAP <MacAddress>.
Notice
Log notification for deleting a FCF entry on the specific interface when receiving a
DA from an FCF with FC-MAP not matching the configured valued.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<VlanID>
<MacAddress>
0/1, 0/0/1
VLAN ID
MAC address
ENode removed on interface <InterfaceNumber>, VLAN <VlanID>,
ENode MAC: <MacAddress> as all the tentative and active sessions for this ENode are cleared.
Notice
Log notify removing the ENode if all its sessions were closed.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<VlanID>
<MacAddress>
VLAN ID
MAC address
FCF timed out in VLAN <VlanID>, FCF MAC: <MacAddress> on interface
<InterfaceNumber>. All associated sessions with this FCF are cleared.
December/2018 529
Message Collection
Notice
FUJITSU PSWITCH
Log information for removing the stale VN Port session on the specific interface.
<VlanID> VLAN ID
<MacAddress> MAC address
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
VN Port <SessionType> session timed out on interface
<InterfaceNumber> in VLAN <VlanID> ENode MAC: <MacAddress>, FCF
MAC: <MacAddress>, FCoE MAC: <MacAddress>.
Notice
Log notification for the stale VN Port session on the specific interface.
<SessionType> "Telnet", "SSH", "Console", "Serial", "HTTP"...
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<VlanID>
<MacAddress>
0/1, 0/0/1
VLAN ID
MAC address
Failed to delete from h/w the FIP <SessionType> session on interface <InterfaceNumber> in VLAN <VlanID> ENode MAC:
<MacAddress>, FCF MAC: <MacAddress>, FCoE MAC: <MacAddress>.
Warning
Failed to delete FIP snooping session from h/w on the specific interface when processing CVL for ENode.
<SessionType> "Telnet", "SSH", "Console", "Serial", "HTTP"...
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<VlanID>
<MacAddress>
VLAN ID
MAC address
Failed to delete from h/w the FIP <SessionType> session on interface <InterfaceNumber> in VLAN <VlanID> ENode MAC:
<MacAddress>.
530 December/2018
FUJITSU PSWITCH
Warning
Message Collection
Failed to delete FIP session on specific interface.
<SessionType> "Telnet", "SSH", "Console", "Serial", "HTTP"...
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<VlanID>
<MacAddress>
VLAN ID
MAC address
FIP Debug Config file <FileName> read Failed.
Warning
FIP Debug Config file read Failed.
<FileName> Log is created by this file.
FIP snooping debug configuration save to file <FileName> failed.
Warning
FIP snooping debug configuration save to file failed.
<FileName> Log is created by this file.
Number of DCBX application tlvs received (<SetValue>) on port
<InterfaceNumber> are more than supported (<MaxValue>).
Warning
The DCBX application TLVs received on the specific port are more than supported.
<SetValue> Set Value
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<MaxValue>
0/1, 0/0/1
Maximum value
Number of ENodes discovered reached the system limit of
<MaxValue>.
Warning
The number of FIP snooping Enodes discovered reached the system limitation.
<MaxValue> Maximum value
Number of FCFs discovered in VLAN <VlanID> reached the per VLAN max of <MaxValue>.
December/2018 531
Message Collection
Warning
FUJITSU PSWITCH
The number of FCFs discovered in the VLAN reached the per VLAN max limitation.
<VlanID> VLAN ID
<MaxValue> Maximum value
Number of Sessions created reached the system limit of <MaxValue>.
Warning
The number of FIP snooping session entries created reached the system limitation.
<MaxValue> Maximum value
2.1.30.
General
INET_ADDR:Invalid FamilyType - <FamilyType>
Debug
Invalid FamilyType, make sure your type is in the group
<FamilyType> type indicate ipv4 or ipv6(ex. L7_AF_INET, L7_AF_INET6,...) or generic family type
INET_ADDR:Invalid FamilyType - <FamilyType> from
<FileName>(<FileLineNumber>)
Debug
Invalid FamilyType, make sure your type is in the group
<FamilyType> type indicate ipv4 or ipv6(ex. L7_AF_INET, L7_AF_INET6,...) or
<FileName>
<FileLineNumber> generic family type
Log is created by this file.
Log is created by this line.
Failed to clear the next SDM template ID in persistent storage.
Error
Failed to clear the next SDM template ID in persistent storage.
Failed to clear the next SDM template ID persistently.
532 December/2018
FUJITSU PSWITCH
Error
Failed to clear the next SDM template ID persistently.
Message Collection
Failed to get network buffer size value from registry
Error
The key is out of range or entry type does not match current type of that key
Failed to save next SDM template ID persistently.
Error
Failed to save next SDM template ID persistently.
Failed to save the next SDM template ID in persistent storage.
Error
Failed to save the next SDM template ID in persistent storage.
SDM template manager failed to get unit number for management unit.
Error
No manager exist
SDM template manager failed to register with <StackType> message service.
Error
The register ID is already used
<StackType> "Stack" or "Chassis"
Unhandled encryption algorithm <TypeValue>
Error
Unhandled encryption algorithm
<TypeValue> Type Value
Set the next active SDM template to <TemplateName>.
December/2018 533
Message Collection
Informational
Set the next active SDM template to given template
<TemplateName> Template name
FUJITSU PSWITCH
Booting with default SDM template <TemplateName>.
Notice
Booting with default template
<TemplateName> Template name
Booting with saved SDM template <TemplateName>.
Notice
Booting with given template
<TemplateName> Template name
HANDLE LIST : handle list allocation exceeded
Notice
handle list allocation exceeded
HANDLE LIST : Invalid handle list paramshandle
Notice
Invalid handle list paramshandle
HANDLE LIST : Invalid handle node to delete from
<FileName>(<FileLineNumber>)
Notice
Invalid handle node to delete
<FileName> Log is created by this file.
<FileLineNumber> Log is created by this line.
HANDLE LIST : Invalid handle node to retrieve from
<FileName>(<FileLineNumber>)
534 December/2018
FUJITSU PSWITCH
Notice
Invalid handle node to retrieve
<FileName> Log is created by this file.
<FileLineNumber> Log is created by this line.
HANDLE LIST : Null handle list params from
<FileName>(<FileLineNumber>)
Notice
Null handle list params
<FileName> Log is created by this file.
<FileLineNumber> Log is created by this line.
HANDLE LIST : Null handle node to delete from
<FileName>(<FileLineNumber>)
Notice
Null handle node to delete
<FileName> Log is created by this file.
<FileLineNumber> Log is created by this line.
Message Collection
HANDLE LIST : Null handle to retrieve from
<FileName>(<FileLineNumber>)
Notice
Null handle to retrieve
<FileName>
<FileLineNumber>
Log is created by this file.
Log is created by this line.
INET_ADDR: Invalid FamilyType - <FamilyType>
Notice
Invalid FamilyType, make sure your type is in the group
<FamilyType> type indicate ipv4 or ipv6(ex. L7_AF_INET, L7_AF_INET6,...) or generic family type
INET_ADDR:Invalid FamilyType - <FamilyType>
December/2018 535
Message Collection
Notice
FUJITSU PSWITCH
Invalid FamilyType, make sure your type is in the group
<FamilyType> type indicate ipv4 or ipv6(ex. L7_AF_INET, L7_AF_INET6,...) or generic family type
INET_ADDR:Invalid FamilyType - <FamilyType> from
<FileName>(<FileLineNumber>)
Notice
Invalid FamilyType, make sure your type is in the group
<FamilyType> type indicate ipv4 or ipv6(ex. L7_AF_INET, L7_AF_INET6,...) or
<FileName>
<FileLineNumber> generic family type
Log is created by this file.
Log is created by this line.
INET_ADDR:Invalid input maks
Notice
Invalid input maks
INET_ADDR:Invalid MaskLength - <MaskLength>
Notice
Invalid MaskLength
<MaskLength> Mask length
INETADDR: Invalid mask = <Mask>
Notice
Invalid mask
<Mask> Mask value
2.1.31.
IGMP
MGMD protocol heap memory De-init failed for the family
<FamilyType>. MGMD heap memory de-initialization is failed for the specified address family. This message appears when trying to disable MGMD (IGMP/MLD) protocol.As a result of this, the subsequent attempts to enable/disable MGMD will also fail.
536 December/2018
FUJITSU PSWITCH
Error
Message Collection
IGMP/MLD de-intailize the memory for PIM-SM has problem.
<FamilyType> type indicate ipv4 or ipv6(ex. L7_AF_INET, L7_AF_INET6,...) or generic family type
MGMD protocol heap memory De-init failed for the family
<FamilyType>. MGMD heap memory de-initialization is failed for the specified address family. This message appears when trying to disable MGMD (IGMP/MLD) protocol.As a result of this, the subsequent attempts to enable/disable MGMD will also fail.
Error
IGMP/MLD map memory de-initialization has problem.
<FamilyType> type indicate ipv4 or ipv6(ex. L7_AF_INET, L7_AF_INET6,...) or generic family type
MGMD protocol heap memory init failed for the family type
<FamilyType>. MGMD heap memory initialization is failed for the specified address family. This message appears when trying to enable MGMD protocol.
Error
IGMP/MLD map memory initialization has problem.
<FamilyType> type indicate ipv4 or ipv6(ex. L7_AF_INET, L7_AF_INET6,...) or generic family type
MGMD protocol initialization failed for the family <FamilyType>.
MGMD protocol initialization sequence failed. This could be due to the non-availability of some resources. This message appears when trying to enable MGMD protocol.
Error
IGMP/MLD module initial it control block has problem.
<FamilyType> type indicate ipv4 or ipv6(ex. L7_AF_INET, L7_AF_INET6,...) or generic family type
MGMD-proxy protocol heap memory De-init failed for the family
<FamilyType>.MGMD-proxy heap memory de-initialization is failed for the specified address family. This message appears when trying to disable MGMD-proxy protocol. As a result of this, the subsequent attempts to enable/disable MGMD-proxy will also fail.
December/2018 537
Message Collection
Error
FUJITSU PSWITCH
IGMP/MLD-proxy de-intailize the memory for PIM-SM has problem.
<FamilyType> type indicate ipv4 or ipv6(ex. L7_AF_INET, L7_AF_INET6,...) or generic family type
MGMD-proxy protocol initialization failed for the family
<FamilyType>. MGMD-proxy protocol initialization sequence failed.
This could be due to the non-availability of some resources. This message appears when trying to enable MGMD-proxy protocol.
Error
IGMP/MLD proxy module initial it control block has problem.
<FamilyType> type indicate ipv4 or ipv6(ex. L7_AF_INET, L7_AF_INET6,...) or generic family type
Failed to retrieve MGMD group query time out event handler.
Informational
Retrieve the IGMP/MLD group query time out handler has problem.
MGMD all routers address <IPAddress> set to the DTL multicast list failed for mode:<State> on interface <InterfaceNumber>.
Informational
IGMP/MLD to Add the Multicast address in the hardware table has problem.
<IPAddress> ip_address, or, ipv6_address, or hostname
<State> State
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Multicast forwarding mode disable failed for interface
<InterfaceNumber>.
Informational
IGMP/MLD module disable the forwarding mode for the given interface has error.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Multicast forwarding mode enable failed for interface
<InterfaceNumber>.
538 December/2018
FUJITSU PSWITCH
Informational
Message Collection
IGMP/MLD module enable the forwarding mode for the given interface has error.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
MGMD group entry creation failed on interface <InterfaceNumber> for group <IPAddress>. The specified group address registration on the specified router interface failed.
Notice
Create the IGMP/MLD group has problem.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<IPAddress> ip_address, or, ipv6_address, or hostname
MGMD proxy route entry creation failied on interface
<InterfaceNumber>. Registration of the multicast forwarding entry for the specified source address : <IPAddress> and group address :
<IPAddress> failed when MGMD proxy is used.
Notice
IGMP/MLD module add the MRT entry into the tree has error.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<IPAddress>
0/1, 0/0/1 ip_address, or, ipv6_address, or hostname
MLDv2 GroupAddr-[FF02::16] enable with interpeak stack failed for router interface <InterfaceNumber> on interface <InterfaceNumber>.
Registration of this group address with the interpeak stack failed.
As a result of this, MLDv2 packets will not be received at the application.
Notice
Enables/Disables the MLD-V2 IPv6 Group address and interface ID with interpeak stack has some problem.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
MGMD Config-Save Failed; File - <FileName> MGMD current running configuration write to file/memory Failed.
December/2018 539
Message Collection
Warning
IGMP/MLD save the configuration has error.
<FileName> Log is created by this file.
FUJITSU PSWITCH
MGMD socket creation/initialization failed for address family
<FamilyType>. MGMD socket creation/options set failed. As a result of this, the MGMD control packets cannot be sent out on an interface.
Warning
IGMP/MLD module initial it socket has error.
<FamilyType> type indicate ipv4 or ipv6(ex. L7_AF_INET, L7_AF_INET6,...) or generic family type
2.1.32.
IP
Failed to send configuration complete event <ID> to IP MAP thread
Alert
Failed to queue an event to IP MAP message queue.
<ID> ID
Failed to send hardware route add failure timer expire event to
IP MAP thread
Alert
Failed to send hardware route add failure timer expire event to IP MAP thread via message queue
Failed to send IPMAP hardware route add failure event to IP MAP thread
Alert
Failed to send IPMAP hardware route add failure event to IP MAP thread message queue.
Failed to send NIM startup phase <NimStartupPhaseNumber> to IP MAP thread
540 December/2018
FUJITSU PSWITCH
Alert
Failed to send a message to message queue.
<NimStartupPhaseNumber> NIM startup phase number
Message Collection
Failed to send stale route timer expire event to IP MAP thread
Alert
Failed to send stale route timer expire event to IP MAP thread via message queue
Failed to send startup done route timer expire event to IP MAP thread
Alert
Failed to send startup done route timer expire event to IP MAP thread via message queue
Failed to send vrf (id - <VrfID>) setup event to IP MAP thread
Alert
Failed to queue an event to IP MAP message queue.
<VrfID> ID of Virtual Routing and Forwarding Instance
Failure creating IpMap message queue semaphore.
Alert
Failed to create a semaphore.
IP failed to register for apply config completion.
Alert
IP failed to register for apply config completion.
IP MAP failed to register for routing heap exhausted callback.
Alert
IP MAP failed to register for routing heap exhausted callback.
IP6MAP failed to register for checkpoint service callbacks.
December/2018 541
Message Collection
Alert
IP6MAP failed to register for checkpoint service callbacks.
FUJITSU PSWITCH
RTO is full in the VRF <VrfName>. Routing table contains no free routes. The routing table manager stores a limited number of best routes. Either the configured route limit is reached for this VRF instance or available routes in the hardware are exhausted.
Alert
Routing table is full in VRF. Routing table contains no free routes. The routing table manager stores a limited number of best routes. Either the configured route limit is reached for this VRF instance or available routes in the hardware are exhausted.
<VrfName> Name of Virtual Routing and Forwarding Instance
Unable to register a best route callback with VR RTO
Alert
Unable to register a best route callback with VR RTO
Unable to register IPMAP-<VrfID> as a best route callback with RTO
Alert
Unable to register best route callback with routing table.
<VrfID> ID of Virtual Routing and Forwarding Instance
Unable to register VRRP for VRF-ID <VrfID> VRF-named <VrfName> as a best route callback with RTO
Alert
Failed to register a callback function to be called when best routes added, changed, or deleted.
<VrfID> ID of Virtual Routing and Forwarding Instance
<VrfName> Name of Virtual Routing and Forwarding Instance
Failed to add default gateway <Gateway> with source <IPAddress> via interface <ServicePortName> to IP stack
542 December/2018
FUJITSU PSWITCH
Critical
Message Collection
Failed to install the default route in the above created service port route table.
<Gateway> IP gateway
<IPAddress> ip_address, or, ipv6_address, or hostname
<ServicePortName> eth0
Failed to add local network route for network port with source
<IPAddress> via interface <DTLPortName> to IP stack
Critical
Failed to install the local network route in the above created network port route table.
<IPAddress> ip_address, or, ipv6_address, or hostname
<DTLPortName> ex: "dtl0"
Failed to add local network route for service port with source
<IPAddress> via interface <ServicePortName> to IP stack
Critical
Failed to install the local network route in the above created service port route table.
<IPAddress> ip_address, or, ipv6_address, or hostname
<ServicePortName> eth0
Failed to add local route for network <IPAddress>/<Mask> on interface <InterfaceNumber>.
Critical
Failed to add local route for network on interface to routing table.
<IPAddress> ip_address, or, ipv6_address, or hostname
<Mask> Mask value
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to create network port route table number <IPPortNumber> with source <IPAddress>.
December/2018 543
Message Collection
Critical
FUJITSU PSWITCH
Failed to create a routing table for network port.
<IPPortNumber> UDP or TCP port number, ex:8000, 21
<IPAddress> ip_address, or, ipv6_address, or hostname
Failed to create service port route table number <IPPortNumber> with source <IPAddress>.
Critical
Failed to create a routing table for service port.
<IPPortNumber> UDP or TCP port number, ex:8000, 21
<IPAddress> ip_address, or, ipv6_address, or hostname
Failure initialiing RTO change list for client <ClientName>.
Critical
Failed to initialize routing table change list for client
<ClientName> Client name would display which routing protocol (BGP,
OSPF, ...) redistributes the best route
Memory allocation failure in _checkTimers for queue <ID> thread
<TaskID>
Critical
Memory allocation failure in _checkTimers
<ID> ID
<TaskID> Task ID
Purging destination <IPAddress>/<MaskLength> from routing table while best route exists.
Critical
Purging a destination route from routing table while best route exists.
<IPAddress> ip_address, or, ipv6_address, or hostname
<MaskLength> Mask length
Routing heap is <SizeValue> percent allocated. <SizeValue> of
<MaxValue> bytes allocated.
544 December/2018
FUJITSU PSWITCH
Critical
Message Collection
Routing heap is nearly exhausted! System is in critical stage.
<SizeValue> An integer for a specific range or a limit value.
<MaxValue> Maximum value
Routing heap is fully allocated. Disabling and re-enabling routing on all virtual routers.
Critical
Try to recover a critical error by restarting routing on all virtual routers.
Routing heap is fully allocated. Rebooting.
Critical
Try to recover a critical error by rebooting.
Routing heap is nearly exhausted. <SizeValue> of <MaxValue> bytes allocated. <SizeValue> bytes left unallocated.
Critical
Routing heap is nearly exhausted!
<SizeValue> An integer for a specific range or a limit value.
<MaxValue> Maximum value
Unable to create free list for memory chunk of size <MaxValue> freed to routing heap.
Critical
Can't create free list for this block because we're out of memory!
<MaxValue> Maximum value
Unable to create free list of size <MaxValue> in the routing memory heap.
Critical
Unable to create free list in the routing memory heap.
<MaxValue> Maximum value
Duplicate registration for VRF events by protocol
<IPRoutingProtocolType>.
December/2018 545
Message Collection
Debug
FUJITSU PSWITCH
The registration already exists.
<IPRoutingProtocolType> L7_IPRT_(RIP/VRRP/OSPF/MGMD/PIMDM/...)
Failed to add default gateway <Gateway> via interface
<InterfaceNumber> to IP stack
Debug
Failed to install the default route in the above created network port route table.
<Gateway> IP gateway
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to deregister external <FamilyType> best route client
<ClientName> with RTO registration ID <ID>.
Debug
Failed to deregister the callback of best route change client with routing table.
<FamilyType> type indicate ipv4 or ipv6(ex. L7_AF_INET, L7_AF_INET6,...) or
<ClientName>
<ID> generic family type
Client name would display which routing protocol (BGP,
OSPF, ...) redistributes the best route
ID
Failed to find IP MAP instance for intIfNum <InterfaceNumber>.
Debug
Failed to find IP information for interface.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to find IP MAP instance for VRF ID <VrfID>.
Debug
Failed to retrieve IP information about this VRF.
<VrfID> ID of Virtual Routing and Forwarding Instance
Looking up RTO for existing route for ip = <IPAddress> mask = <Mask>
546 December/2018
FUJITSU PSWITCH
Debug
Message Collection
A debug message when associating a router interface with an IP address and MAC address.
<IPAddress> ip_address, or, ipv6_address, or hostname
<Mask> Mask value
Received an invalid ip packet on <InterfaceNumber>: length
<PacketLength> Src ip <IPAddress> Src port <IPPortNumber> Dst ip
<IPAddress> Dst port <IPPortNumber>
Debug
Received a malformed TCP/UDP packet.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<PacketLength>
<IPAddress>
<IPPortNumber>
Packet length ip_address, or, ipv6_address, or hostname
UDP or TCP port number, ex:8000, 21
Received an invalid ip packet on <InterfaceNumber>: length
<PacketLength> Src ip <IPAddress> Src port is Null Dst ip
<IPAddress> Dst port is Null
Debug
Received a malformed IP packet.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<PacketLength>
<IPAddress>
0/1, 0/0/1
Packet length ip_address, or, ipv6_address, or hostname
Request to register an RPPI <FamilyType> best route client with duplicate name <ClientName>
Debug
The RPPI client is already registered.
<FamilyType> type indicate ipv4 or ipv6(ex. L7_AF_INET, L7_AF_INET6,...) or
<ClientName> generic family type
Client name would display which routing protocol (BGP,
OSPF, ...) redistributes the best route
RTO lookup failed for route for ip = <IPAddress> mask = <Mask>
December/2018 547
Message Collection
Debug
FUJITSU PSWITCH
A debug message when associating a router interface with an IP address and MAC address.
<IPAddress> ip_address, or, ipv6_address, or hostname
<Mask> Mask value
Error: rto.c radix corruption detected!
Emergency
Database corruption
Failed to initialize the routing infrastructure.
Emergency
Failed to initialize the routing infrastructure.
RTO Instance not initialized for VRF named <VrfName>
Emergency
Routing table for the VRF is not initialized. VRF Instance is corrupted.
<VrfName> Name of Virtual Routing and Forwarding Instance
VRF Instance corruption detected for VRF named <VrfName>
Emergency
Routing table for the VRF is not initialized. VRF Instance is corrupted.
<VrfName> Name of Virtual Routing and Forwarding Instance
VRF Instance corruption detected! VRID = <VrfID>
Emergency
Routing table for the VRF is not initialized. VRF Instance is corrupted.
<VrfID> ID of Virtual Routing and Forwarding Instance
<FunctionName>: ERROR: Failed to configure static route to
<IPAddress>/<Mask>, rc <ErrorCode>
548 December/2018
FUJITSU PSWITCH
Error
Message Collection
Failed to configure static route
<FunctionName> Log is created by this function.
<IPAddress>
<Mask>
<ErrorCode> ip_address, or, ipv6_address, or hostname
Mask value
Error code
Attempt to deregister invalid protocol <IPRoutingProtocolType> for IPv4 router events.
Error
Attempt to deregister invalid protocol for IPv4 router events.
<IPRoutingProtocolType> L7_IPRT_(RIP/VRRP/OSPF/MGMD/PIMDM/...)
Attempt to deregister invalid protocol <IPRoutingProtocolType> for VRF events.
Error
Failed to deregister for VRF create/delete events
<IPRoutingProtocolType> L7_IPRT_(RIP/VRRP/OSPF/MGMD/PIMDM/...)
Attempt to deregister protocol <IPRoutingProtocolType> for IPv4 router events, but protocol is not registered.
Error
Attempt to deregister protocol for IPv4 router events, but protocol is not registered.
<IPRoutingProtocolType> L7_IPRT_(RIP/VRRP/OSPF/MGMD/PIMDM/...)
Attempt to disable IPv4 on interface <IPRoutingProtocolType> which cannot be configured for IPv4.
Error
Cannot retrieve and edit this interface configuration data.
<IPRoutingProtocolType> L7_IPRT_(RIP/VRRP/OSPF/MGMD/PIMDM/...)
Attempt to register invalid protocol <IPRoutingProtocolType> for
IPv4 router events.
December/2018 549
Message Collection
Error
FUJITSU PSWITCH
Attempt to register invalid protocol for IPv4 router events.
<IPRoutingProtocolType> L7_IPRT_(RIP/VRRP/OSPF/MGMD/PIMDM/...)
Attempt to register invalid protocol <IPRoutingProtocolType> for
VRF events.
Error
Failed to register for VRF create/delete events
<IPRoutingProtocolType> L7_IPRT_(RIP/VRRP/OSPF/MGMD/PIMDM/...)
Bad give lock type <LockType> in <TaskID>.
Error
Unexpected give lock type.
<LockType> "Read", "Write"
<TaskID> Task ID
Bad take lock type <LockType> in <TaskID>.
Error
Unexpected take lock type.
<LockType> "Read", "Write"
<TaskID> Task ID
Best route client registration failed for <ClientName>. Invalid
VRID <VrfID>.
Error
Max VR instances reached.
<ClientName> Client name would display which routing protocol (BGP,
<VrfID>
OSPF, ...) redistributes the best route
ID of Virtual Routing and Forwarding Instance
Best route client registration failed for <ClientName>. NULL function pointer.
550 December/2018
FUJITSU PSWITCH
Error
Message Collection
Invaild input parameters for this function.
<ClientName> Client name would display which routing protocol (BGP,
OSPF, ...) redistributes the best route
Best route client registration failed for <ClientName>. VRF not initialized.
Error
VRF not initialized.
<ClientName> Client name would display which routing protocol (BGP,
OSPF, ...) redistributes the best route
Can not get semaphore.
Error
Failed to take semaphore.
Creation of a Routing interface on VLAN-<VlanID> (by default) failed
Error
Failed to create routing interface on VLAN on default VRF.
<VlanID> VLAN ID
Deleting radix entry still linked into the change list.
Error
Deleting radix entry still linked into the change list in the routing table.
Driver failed to set IP address <IPAddress>/<Mask> on interface
<InterfaceNumber>.
December/2018 551
Message Collection
Error
FUJITSU PSWITCH
Failed to set IP address on interface in driver.
<IPAddress> ip_address, or, ipv6_address, or hostname
<Mask> Mask value
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Duplicate registration for IPv4 routing events by protocol
<IPRoutingProtocolType>.
Error
Duplicate registration for IPv4 routing events by protocol.
<IPRoutingProtocolType> L7_IPRT_(RIP/VRRP/OSPF/MGMD/PIMDM/...)
Error calling <FunctionName> with IPv4 address of 0.
Error
Invaild input parameters for this function.
<FunctionName> Log is created by this function.
Error purging change list. No stop.
Error
Invaild input parameters for this function.
Error releasing interface index from IP stack for interface
<InterfaceNumber>.
Error
Error when releasing interface index from IP stack
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed removing IP address from interface <InterfaceNumber>.
552 December/2018
FUJITSU PSWITCH
Error
Message Collection
Failed removing IP address from the interface.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed removing IP address from interface <InterfaceNumber>.
Error <ErrorCode>.
Error
Failed removing IP address from the interface.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<ErrorCode>
0/1, 0/0/1
Error code
Failed to add a veth leaked interface route in default router
Error
Failed to add a veth leaked interface route in default router
Failed to add a veth leaked interface route to VRF <VrfID>
Error
Failed to create veth pair for the leaked route interface between default router and VRF namespace.
<VrfID> ID of Virtual Routing and Forwarding Instance
Failed to add IPV6 default gateway <Gateway> via interface
<InterfaceNumber> to IP stack with error <ErrorMessage>
Error
Failed to install the IPv6 default route in the above created network port route table.
<Gateway> IP gateway
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<ErrorMessage> Error message
Failed to add IPv6 route to <IP6Address>/<IP6Prefix> in Hardware
December/2018 553
Message Collection
Error
Failed to add IPv6 route to hardware.
<IP6Address> IPv6 address
<IP6Prefix> The size in bits of the prefix
FUJITSU PSWITCH
Failed to add local route to <IPAddress>/<Mask> on interface
<InterfaceNumber>.
Error
Failed to add local route to routing table.
<IPAddress> ip_address, or, ipv6_address, or hostname
<Mask> Mask value
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to add secondary address <IPAddress>/<Mask> on interface
<InterfaceNumber> to IP stack.
Error
Failed to add secondary address on interface to IP stack.
<IPAddress> ip_address, or, ipv6_address, or hostname
<Mask> Mask value
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to add unique next hop to next hops tree.
Error
Failed to add unique next hop to next hops tree.
Failed to add unnumbered peer:<IPAddress> route on interface
<InterfaceNumber>. Exceeded the maximum number of configurable next hops for <IPAddress>.
554 December/2018
FUJITSU PSWITCH
Error
Message Collection
Exceeded the maximum number of configurable next hops.
<IPAddress> ip_address, or, ipv6_address, or hostname
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to add unnumbered peer:<IPAddress> route on interface
<InterfaceNumber>. The corresponding Unnumbered Peer Route could not be installed.
Error
The corresponding Unnumbered Peer Route could not be installed.
<IPAddress> ip_address, or, ipv6_address, or hostname
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to add unnumbered peer:<IPAddress> route on interface
<InterfaceNumber>. The nexthop router address can't be in the same subnet as the service/network port. Please remove the unnumbered config from the interface <InterfaceNumber>.
Error
The nexthop router address can't be in the same subnet as the service/network port. Please remove the unnumbered config from the interface
<IPAddress> ip_address, or, ipv6_address, or hostname
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to add unnumbered peer:<IPAddress> route on interface
<InterfaceNumber>. The static route table is full.
Error
The static route table is full.
<IPAddress> ip_address, or, ipv6_address, or hostname
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to add unnumbered peer:<IPAddress> route on interface
<InterfaceNumber>. The static route will not take effect until a routing interface belonging to the same subnet as the next hop IP is created and activated.
December/2018 555
Message Collection
Error
FUJITSU PSWITCH
The static route will not take effect until a routing interface belonging to the same subnet as the next hop IP is created and activated.
<IPAddress> ip_address, or, ipv6_address, or hostname
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to bind on veth monitor socket to device <InterfaceNumber> in VRF <VrfName>, error <ErrorCode>
Error
Failed to bind socket to the interface
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<VrfName>
<ErrorCode>
Name of Virtual Routing and Forwarding Instance
Error code
Failed to bind UNIX socket with fd <SocketFD> for RPPI to <FilePath>.
Error <ErrorCode>. (<ErrorMessage>)
Error
Failed to bind UNIX socket.
<SocketFD> File descriptor for socket
<FilePath>
<ErrorCode>
<ErrorMessage>
File path
Error code
Error message
Failed to clear ARP cache of entries learned on interface
<InterfaceNumber> when interface disabled.
Error
Failed to clear ARP cache of entries learned on interface when interface disabled.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to convert intf <InterfaceNumber> to usp, no local packets given to VR namespace
556 December/2018
FUJITSU PSWITCH
Error
Message Collection
Failed to get Unit/Slot/Port by interface number.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to create default router's IPMAP instance
Error
Failed to create default router's IPMAP instance
Failed to create interface <InterfaceNumber> with intIfNum
<InterfaceNumber>
Error
Failed to create an interface with an intIfNum.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to create IP MAP async event handler for VRF-ID <VrfID>
VRF-named <VrfName>.
Error
Failed to create an asynchronous event handler
<VrfID> ID of Virtual Routing and Forwarding Instance
<VrfName> Name of Virtual Routing and Forwarding Instance
Failed to create IP MAP Lock info in VR Manager
Error
Failed to allocate a block of memory for IP MAP lock info.
Failed to create IP MAP read-write lock in VR Manager.
Error
Failed to create read-write lock
Failed to create IP MAP route change buffer for VRF-ID <VrfID>
VRF-named <VrfName>.
December/2018 557
Message Collection
Error
FUJITSU PSWITCH
Failed to allocate a block of memory for best route notification.
<VrfID> ID of Virtual Routing and Forwarding Instance
<VrfName> Name of Virtual Routing and Forwarding Instance
Failed to create IP MAP routing event notify list for VRF-ID <VrfID>,
VRF-named <VrfName>.
Error
Failed to allocate a block of memory for routing event notify list.
<VrfID> ID of Virtual Routing and Forwarding Instance
<VrfName> Name of Virtual Routing and Forwarding Instance
Failed to create ip stats for VRF <VrfName>
Error
Failed to create ip stats for VRF
<VrfName> Name of Virtual Routing and Forwarding Instance
Failed to create IPMAP buffer pool in VR manager
Error
Failed to allocates and creates a buffer pool.
Failed to create IPMAP instance for VRF name <VrfName> with VRF-ID
<VrfID>
Error
Failed to create IPMAP instance for VRF
<VrfName> Name of Virtual Routing and Forwarding Instance
<VrfID> ID of Virtual Routing and Forwarding Instance
Failed to create IPMAP instance for VRF-ID <VrfID> VRF-named
<VrfName>.
558 December/2018
FUJITSU PSWITCH
Error
Message Collection
Failed to create IPMAP instance for VRF
<VrfID> ID of Virtual Routing and Forwarding Instance
<VrfName> Name of Virtual Routing and Forwarding Instance
Failed to create packet socket for veth endpoint of VRF <VrfName> and device <InterfaceNumber>, error <ErrorCode>
Error
Failed to create socket
<VrfName> Name of Virtual Routing and Forwarding Instance
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<ErrorCode> Error code
Failed to create router interface <InterfaceNumber> in IP stack.
Error
Failed to create routing interface in IP stack.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to create RTO for VRF-ID <VrfID> VRF-named <VrfName>.
Error
Failed to create a routing table for the virtual router.
<VrfID> ID of Virtual Routing and Forwarding Instance
<VrfName> Name of Virtual Routing and Forwarding Instance
Failed to create semaphore for internal VLAN checkpoint.
Error
Failed to create semaphore.
Failed to create socket <ErrorCode>
December/2018 559
Message Collection
Error
Failed to create socket
<ErrorCode> Error code
FUJITSU PSWITCH
Failed to create UNIX socket for RPPI. Error <ErrorCode>.
(<ErrorMessage>)
Error
Failed to create UNIX socket for RPPI.
<ErrorCode> Error code
<ErrorMessage> Error message
Failed to create veth pair for leaked route interface to default router, error <ErrorCode>
Error
Failed to create veth pair for leaked route interface to default router via system command.
<ErrorCode> Error code
Failed to create veth pair for leaked route interface to VRF
<VrfName>, error <ErrorCode>
Error
Failed to create veth pair for leaked route interface to VRF via system command.
<VrfName> Name of Virtual Routing and Forwarding Instance
<ErrorCode> Error code
Failed to create veth pair for VRF <VrfName> and interface
<InterfaceNumber>, error <ErrorCode>
Error
Failed to create veth pair for the leaked route interface between default router and VRF namespace.
<VrfName> Name of Virtual Routing and Forwarding Instance
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<ErrorCode> Error code
Failed to create VRF Manager checkpoint semaphore.
560 December/2018
FUJITSU PSWITCH
Error
Failed to create a semaphore
Message Collection
Failed to create VRF Manager VRF creation Pending semaphore.
Error
Failed to create a semaphore
Failed to create/start OSPF app in VRF <VrfName>, error
<ErrorCode>
Error
Failed to create/start OSPF app process in VRF
<VrfName> Name of Virtual Routing and Forwarding Instance
<ErrorCode> Error code
Failed to create/start ping app in VRF <VrfName>, error
<ErrorCode>
Error
Failed to create/start ping app process in VRF
<VrfName> Name of Virtual Routing and Forwarding Instance
<ErrorCode> Error code
Failed to create/start Remote socket agent app in VRF <VrfName>, error <ErrorCode>
Error
Failed to create/start Remote socket agent app process in VRF
<VrfName> Name of Virtual Routing and Forwarding Instance
<ErrorCode> Error code
Failed to create/start traceroute app in VRF <VrfName>, error
<ErrorCode>
December/2018 561
Message Collection
Error
FUJITSU PSWITCH
Failed to create/start traceroute app process in VRF
<VrfName> Name of Virtual Routing and Forwarding Instance
<ErrorCode> Error code
Failed to create/start VR Agent app in VRF <VrfName>, error
<ErrorCode>
Error
Failed to create/start VR Agent app process in VRF
<VrfName> Name of Virtual Routing and Forwarding Instance
<ErrorCode> Error code
Failed to create/start VRF Init app in VRF <VrfName>, error
<ErrorCode>
Error
Failed to create/start VRF Init app process in VRF
<VrfName> Name of Virtual Routing and Forwarding Instance
<ErrorCode> Error code
Failed to delete ip stats for VRF <VrfName>, error <ErrorCode>
Error
Failed to delete ip stats for VRF
<VrfName> Name of Virtual Routing and Forwarding Instance
<ErrorCode> Error code
Failed to delete next hop group from group tree.
Error
Failed to delete next hop group from group tree.
Failed to delete unique next hop from next hops tree.
Error
Failed to delete unique next hop from next hops tree.
Failed to delete unnumbered peer:<IPAddress> route on interface
<InterfaceNumber>
562 December/2018
FUJITSU PSWITCH
Error
Message Collection
Failed to delete unnumbered peer, cannot delete next hops on the interface.
<IPAddress> ip_address, or, ipv6_address, or hostname
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to delete veth pair for VRF <VrfName> and interface
<InterfaceNumber>, error <ErrorCode>
Error
Failed to delete veth pair for VRF and interface.
<VrfName> Name of Virtual Routing and Forwarding Instance
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<ErrorCode>
0/1, 0/0/1
Error code
Failed to delete/stop OSPF app in VRF <VrfName>, error <ErrorCode>
Error
Failed to delete/stop OSPF app process in VRF
<VrfName> Name of Virtual Routing and Forwarding Instance
<ErrorCode> Error code
Failed to delete/stop ping app in VRF <VrfName>, error <ErrorCode>
Error
Failed to delete/stop ping app process in VRF
<VrfName> Name of Virtual Routing and Forwarding Instance
<ErrorCode> Error code
Failed to delete/stop Remote socket agent app in VRF <VrfName>, error <ErrorCode>
Error
Failed to delete/stop Remote socket agent app process in VRF
<VrfName> Name of Virtual Routing and Forwarding Instance
<ErrorCode> Error code
Failed to delete/stop traceroute app in VRF <VrfName>, error
<ErrorCode>
December/2018 563
Message Collection
Error
FUJITSU PSWITCH
Failed to delete/stop traceroute app process in VR
<VrfName> Name of Virtual Routing and Forwarding Instance
<ErrorCode> Error code
Failed to delete/stop VR Agent app in VRF <VrfName>, error
<ErrorCode>
Error
Failed to delete/stop VR Agent app process in VRF
<VrfName> Name of Virtual Routing and Forwarding Instance
<ErrorCode> Error code
Failed to delete/stop VRF Init app in VRF <VrfName>, error
<ErrorCode>
Error
Failed to delete/stop VRF Init app process in VRF
<VrfName> Name of Virtual Routing and Forwarding Instance
<ErrorCode> Error code
Failed to deregister secondary address <IPAddress>/<Mask> on interface <InterfaceNumber> with ARP.
Error
Failed to deregister secondary address on interface with ARP.
<IPAddress> ip_address, or, ipv6_address, or hostname
<Mask> Mask value
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to enable the routing interface for the interface
<InterfaceNumber>
Error
Failed to update the interface for routing.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to enable the routing interface for the interface
<InterfaceNumber> in VRF [<InterfaceNumber>]
564 December/2018
FUJITSU PSWITCH
Error
Message Collection
Failed to update routing interface for VRF.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to enable the routing interface for the interface
<InterfaceNumber> in VRF [<InterfaceNumber>]. RTO is FULL!
Error
Failed to reserve space in routing table for VRF. Routing table is full.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to enable the routing interface for the interface
<InterfaceNumber>. RTO is FULL!
Error
Failed to reserve space in routing table. Routing table is full.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to find IP MAP instance for interface <InterfaceNumber>.
Error
Failed to retrieve IP information about this interface.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to find IP MAP instance for VRF <VrfName>. Activation of
Startup Done event failed
Error
IPMAP fails to find the VRF instance for VRF.
<VrfName> Name of Virtual Routing and Forwarding Instance
Failed to get interface index from IP stack for interface
<InterfaceNumber>.
December/2018 565
Message Collection
Error
FUJITSU PSWITCH
Failed to get interface index from IP stack.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to get link MTU from NIM for interface <InterfaceNumber>
Error
Failed to get link MTU from NIM module for a interface.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to get MAC address for interface <InterfaceNumber>.
Error
Failed to get MAC address for interface.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to get stack i/f index for intf <InterfaceNumber> named
<InterfaceNumber>
Error
Failed to get stack interface index for interface
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to get stack ifIndex for veth endpoint of VRF <VrfName> and device <InterfaceNumber>, error <ErrorCode>
Error
Failed to create packet socket for veth endpoint of VRF and device
<VrfName> Name of Virtual Routing and Forwarding Instance
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<ErrorCode> Error code
Failed to get the hardware failed route stats
566 December/2018
FUJITSU PSWITCH
Error
Failed to get the hardware failure routes.
Message Collection
Failed to get the ipmap instance for the vr
Error
IPMAP fails to find the VRF instance for VRF.
Failed to get the IPv6 route hardware failure stats
Error
Failed to get the IPv6 route hardware failure stats
Failed to get VLAN-<VlanID> interface number.
Error
Failed to get interface number of VLAN of default VRF.
<VlanID> VLAN ID
Failed to give IP MAP <LockType> lock in <FunctionName>
Error
Failed to give IP MAP R/W lock.
<LockType> "Read", "Write"
<FunctionName> Log is created by this function.
Failed to insert next hop group in next hop group tree.
Error
Failed to insert next hop group in next hop group tree.
Failed to move the routing interface for the interface
<InterfaceNumber> to default router. RTO is FULL!
December/2018 567
Message Collection
Error
FUJITSU PSWITCH
Failed to reserve space in routing table. Routing table is full.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to move veth endpoint for interface <InterfaceNumber> to
VRF <VrfName>
Error
Failed to move one end device of the veth pair to the namespace
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<VrfName>
0/1, 0/0/1
Name of Virtual Routing and Forwarding Instance
Failed to register external <FamilyType> best route client
<ClientName> with RTO.
Error
Failed to register the callback of best route change client with routing table.
<FamilyType> type indicate ipv4 or ipv6(ex. L7_AF_INET, L7_AF_INET6,...) or generic family type
<ClientName> Client name would display which routing protocol (BGP,
OSPF, ...) redistributes the best route
Failed to register interface <InterfaceNumber> for ALL HOSTS IP multicast address.
Error
Failed to register interface for ALL HOSTS IP multicast address.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to register interface <InterfaceNumber> for ALL ROUTERS IP multicast address.
568 December/2018
FUJITSU PSWITCH
Error
Message Collection
Failed to register interface for ALL ROUTERS IP multicast address.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to register interface <InterfaceNumber> for limited broadcast address.
Error
Failed to register interface for limited broadcast address.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to register interface <InterfaceNumber> in VRF <VrfName> with veth-monitor-task
Error
Failed to add an endpoint for veth monitoring
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<VrfName>
0/1, 0/0/1
Name of Virtual Routing and Forwarding Instance
Failed to register leaked route interface for VRF <VrfName> with veth-monitor-task
Error
Failed to register leaked route interface for VRF with veth-monitor-task
<VrfName> Name of Virtual Routing and Forwarding Instance
Failed to register route type <IPRoutingProtocolName>
Error
Failed to add a route protocol to the set of IPv4 unicast routing protocols.
<IPRoutingProtocolName> RIP, OSPF or BGP
Failed to register router interface <InterfaceNumber> with ARP.
December/2018 569
Message Collection
Error
FUJITSU PSWITCH
Failed to registers a routing interface with the IP Mapping layer ARP function to allow participation in ARP operation.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to register secondary address <IPAddress>/<Mask> on interface <InterfaceNumber> with ARP.
Error
Failed to register secondary address on interface with ARP.
<IPAddress> ip_address, or, ipv6_address, or hostname
<Mask> Mask value
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to remote IP all routers address from interface
<InterfaceNumber>.
Error
Failed to remove static IP local multicast addresses from the interface local multicast table.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to remove IP All Hosts Address from interface
<InterfaceNumber>.
Error
Failed to remove static IP local multicast addresses from the interface local multicast table.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to remove Limited Broadcast Address from interface
<InterfaceNumber>.
570 December/2018
FUJITSU PSWITCH
Error
Message Collection
Failed to remove static IP local multicast addresses from the interface local multicast table.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to remove router interface <InterfaceNumber> from hardware.
Error
Failed to notify driver about an interface change. IP MAP tells driver when routing is enabled or disabled on an interface.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to remove router interface <InterfaceNumber> from IP stack.
Error
Failed to remove routing interface from IP stack.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to retrieve best route changes from RTO.
Error
Failed to retrieve best route changes from routing table.
Failed to send best route notification message to RPPI thread.
Error
Failed to send a message to RPPI thread via message queue.
Failed to send policy change notification message to RPPI thread.
Error
Failed to send a message to RPPI thread via message queue.
Failed to send router event message to RPPI thread.
December/2018 571
Message Collection
Error
Failed to send a message to RPPI thread via message queue.
FUJITSU PSWITCH
Failed to set an IP address (by default) on VLAN-<VlanID>.
Error
Failed to set an IP address on VLAN on default VRF.
<VlanID> VLAN ID
Failed to set DHCP mode (by default) on VLAN-<VlanID>.
Error
Failed to set DHCP mode on VLAN on default VRF.
<VlanID> VLAN ID
Failed to set socket for RPPI to non-blocking. Error <ErrorCode>.
(<ErrorMessage>)
Error
Failed to set socket for RPPI to non-blocking.
<ErrorCode> Error code
<ErrorMessage> Error message
Failed to set SRX settings <ErrorCode>
Error
Failed to set SRX settings
<ErrorCode> Error code
Failed to set STX settings <ErrorCode>
Error
Failed to set STX settings
<ErrorCode> Error code
Failed to set the mtu on the local end of the veth pair error
<ErrorCode>
572 December/2018
FUJITSU PSWITCH
Error
Failed to set the MTU on the interface via system command.
<ErrorCode> Error code
Message Collection
Failed to set the socket send buffer to <SocketID>. Error
(<ErrorMessage>)
Error
Failed to set the socket send buffer.
<SocketID> Socket ID
<ErrorMessage> Error message
Failed to set TSO settings <ErrorCode>
Error
Failed to set TSO settings
<ErrorCode> Error code
Failed to set UFO settings <ErrorCode>
Error
Failed to set UFO settings
<ErrorCode> Error code
Failed to spawn veth Monitor Task
Error
Failed to create a task.
Failed to store checkpoint data for port-based router interface
<InterfaceNumber>
Error
Failed to store checkpoint data for port-based routing interface.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to take IP MAP <LockType> lock in <FunctionName> within
<TimeValue> ms. Waited <TimeValue> ms.
December/2018 573
Message Collection
Error
Failed to take IP MAP lock in time.
<LockType> "Read", "Write"
<FunctionName>
<TimeValue>
Log is created by this function.
Time Value
FUJITSU PSWITCH
Failed to unregister router interface <InterfaceNumber> with ARP.
Error
Failed to unregister routing interface with ARP.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failure taking ipMap message queue semaphore.
Error
Failed to take semaphore.
Failure taking task message queue semaphore.
Error
Failed to take semaphore
Failure to send IPv4 router event for interface <InterfaceNumber>, event <EventID>.
Error
Failed to send IPv4 router event for interface
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<EventID>
0/1, 0/0/1
Event ID
For client <ClientName>, DELETE follows
<RoutingTableChangeType>.
574 December/2018
FUJITSU PSWITCH
Error
Message Collection
Previous change cannot be DELETE when trying to DELETE again.
<ClientName> Client name would display which routing protocol (BGP,
OSPF, ...) redistributes the best route
<RoutingTableChangeType> The change type value for the routing table.
For client <ClientName>, MODIFY follows DELETE.
Error
Previous change cannot be DELETE when trying to MODIFY.
<ClientName> Client name would display which routing protocol (BGP,
OSPF, ...) redistributes the best route
Hardware failed to accept IPv4 MTU of <SetValue> on interface
<InterfaceNumber>.
Error
Failed to modify IPv4 routing interface in hardware.
<SetValue> Set Value
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Incorrect NSF protocol type <TypeValue>.
Error
Unknown NSF protocol type.
<TypeValue> Type Value
indicateStatusToUser() failed with error <ErrorCode>
Error
indicateStatusToUser() failed
<ErrorCode> Error code
interface <InterfaceNumber> is a Tunnel interfaces. VRF is not supported.
December/2018 575
Message Collection
Error
FUJITSU PSWITCH
Tunnel interface is not supported by VRF.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Interface index map has been corrupted.
Error
Interface index map has been corrupted.
Interface structure already exists for interface
<InterfaceNumber> when L7_CREATE event received
Error
Interface has already created.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
intf <InterfaceNumber>, <InterfaceNumber>: Could not get type, rc
= <ErrorCode>
Error
Failed to get interface type.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<ErrorCode> Error code
Invalid ACL event type <EventID>.
Error
Invalid ACL event type.
<EventID> Event ID
Invalid address family <FamilyType> in attempt to deregister best route client
576 December/2018
FUJITSU PSWITCH
Error
Message Collection
Invalid address family in attempt to deregister best route client callback.
<FamilyType> type indicate ipv4 or ipv6(ex. L7_AF_INET, L7_AF_INET6,...) or generic family type
Invalid address family <FamilyType> in attempt to register best route client
Error
Invalid address family in attempt to register best route client callback.
<FamilyType> type indicate ipv4 or ipv6(ex. L7_AF_INET, L7_AF_INET6,...) or generic family type
Invalid policy change type <EventID>
Error
Invalid policy change type.
<EventID> Event ID
Invalid prefix list event type <EventID>.
Error
Invalid prefix list event type.
<EventID> Event ID
Invalid route map event type <EventID>.
Error
Invalid route map event type.
<EventID> Event ID
IP MAP failed to create async event correlator for event <EventID>
<InterfaceNumber>.
Error
Failed to create a correlator and populate associated event data
<EventID> Event ID
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
IP MAP read lock held by <FunctionName>
December/2018 577
Message Collection
Error
IP MAP read lock held by others.
<FunctionName> Log is created by this function.
IP MAP write lock held by <FunctionName>
Error
IP MAP write lock held by others.
<FunctionName> Log is created by this function.
FUJITSU PSWITCH
IPMAP fails to find the VRF instance for VRF Id: <VrfID> named
<VrfName> for event named IPMAP_STARTUP_DONE_TIMER
Error
IPMAP fails to find the VRF instance for VRF.
<VrfID> ID of Virtual Routing and Forwarding Instance
<VrfName> Name of Virtual Routing and Forwarding Instance
ipMapDefaultRoutingVlanCreateEventRegister: failed to subscribe registrat ID <ComponentID>
Error
Max registration reached.
<ComponentID> Component ID
ipMapDefaultRoutingVlanCreateEventRegister: Invalid registrat
ID <ComponentID>
Error
register ID (component ID) is out of range.
<ComponentID> Component ID
ipMapProcess_Queue is NULL
Error
IPMAP message does not exist.
ipstkCheckpointInit: Error allocating data for checkpoint queue
578 December/2018
FUJITSU PSWITCH
Error
Failed to create message queue.
IPv4 route addition failed in Hardware
Error
Route table has routes which are not present in the hardware
IPv6 route addition failed in Hardware
Error
Failed to add IPv6 route to hardware.
Message Collection
More than one outstanding NIM callback on interface
<InterfaceNumber>
Error
IP has more than one outstanding NIM callback on interface.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
No correlator data available.
Error
Couldn't get associated data with the event correlator
NULL handlerId in <FunctionName>.
Error
Passed NULL handlerId to this function.
<FunctionName> Log is created by this function.
NULL parameter to <FunctionName>.
Error
Passed NULL parameters to this function.
<FunctionName> Log is created by this function.
Null pointer has been passed as a parameter.
December/2018 579
Message Collection
Error
Null pointer has been passed as a parameter.
FUJITSU PSWITCH
On interface <InterfaceNumber>, attempted to set IPv4 MTU to
<SetValue> because of a change to the link MTU. IPv4 MTU change failed.
Error
Tried to update IPv4 MTU but failed.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<SetValue> Set Value
OS_XX_KillThread: unable to kill thread
Error
OS_XX_KillThread: unable to kill thread
osapiMessageSend() failed with rc = <ErrorCode>
Error
Failed to send a message to message queue.
<ErrorCode> Error code
Peer info update on interface <InterfaceNumber> with the wrong flag:<IPRoutingProtocolType>
Error
Received Unknown Unnumbered IP Interface Route Flags.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<IPRoutingProtocolType> L7_IPRT_(RIP/VRRP/OSPF/MGMD/PIMDM/...)
Received NIM startup <NimStartupPhaseNumber> callback while in init state <State>
580 December/2018
FUJITSU PSWITCH
Error
Unexpected startup callback from NIM module.
<NimStartupPhaseNumber> NIM startup phase number
<State> State
Message Collection
RPPI failed to deregister callback for ACL route filter changes.
Error
RPPI failed to deregister callback for ACL route filter changes.
RPPI failed to deregister callback for prefix list changes.
Error
RPPI failed to deregister callback for prefix list changes.
RPPI failed to deregister callback for route map changes.
Error
RPPI failed to deregister callback for route map changes.
RPPI failed to register for ACL route filter changes
Error
RPPI failed to register for ACL route filter changes
RPPI failed to register for prefix list changes
Error
RPPI failed to register for prefix list changes
RPPI failed to register for route map changes
Error
RPPI failed to register for route map changes
RPPI failed to retrieve best route changes from the routing table manager.
December/2018 581
Message Collection
Error
FUJITSU PSWITCH
RPPI failed to retrieve best route changes from the routing table manager.
RTO in VR <VrfName> does not have enough space for local routes.
For each IP address configured on a local interface RTO reserves space for a local route. If an address is added when the routing table is already full, RTO is unable to reserve space for the new local route and logs this message.
Error
Routing table in virtual router doesn't have enough space for local routes. For each IP address configured on a local interface routing table reserves space for a local route. If an address is added when the routing table is already full, routing table is unable to reserve space for the new local route and logs this message.
<VrfName> Name of Virtual Routing and Forwarding Instance
RTO next hops array is full. <MaxValue> current next hops.
Error
routing table next hops array is full.
<MaxValue> Maximum value
RTO returned invalid best route change type
<RoutingTableChangeType>.
Error
Detected invalid best route change type.
<RoutingTableChangeType> The change type value for the routing table.
rtoRouteCopy() asked to copy bad routeInfo object with <RTOHopsID> next hops.
Error
Detected bad function call that asked to copy bad routeInfo object with invaild number of next hops.
<RTOHopsID> RTO Hops ID
Serious error in RPPI Route Protocol Service. <FunctionName> called for proto id <IPRoutingProtocolType> but registration was not successful.
582 December/2018
FUJITSU PSWITCH
Error
Message Collection
Protocol ID is not found in RPPI Route Protocol Service.
<FunctionName> Log is created by this function.
<IPRoutingProtocolType> L7_IPRT_(RIP/VRRP/OSPF/MGMD/PIMDM/...)
Serious error in RPPI Route Protocol Service. <FunctionName> called on a non-existant VRF
Error
VRF does not exist.
<FunctionName> Log is created by this function.
Unable to register best route callback for VRF <VlanID> with RTO
Error
Failed Register a callback function for VRF with routing table.
<VlanID> VLAN ID
Unable to register best route callback for VRF <VlanID> with RTO for IpCkpt
Error
Failed Register a callback function for VRF with routing table for IP checkpoint.
<VlanID> VLAN ID
Unable to register best route callback with RTO
Error
Failed Register a callback function with routing table.
Unknown NIM startup event <EventID>
Error
Received an unknown NIM module startup event
<EventID> Event ID
waitpid returned error, errno = <ErrorCode>, <ErrorMessage>
December/2018 583
Message Collection
Error
Process /sbin/iproute2/ip return failure.
<ErrorCode> Error code
<ErrorMessage> Error message
FUJITSU PSWITCH
<FunctionName>: Unable to allocate ARP entry delete callback info structure
Informational
Failed to allocate a block of memory. Out of resources.
<FunctionName> Log is created by this function.
<FunctionName>: Unable to allocate arp entry deletion callback table
Informational
Failed to allocate a block of memory. Out of resources.
<FunctionName> Log is created by this function.
Assigning VLAN ID <ID> to port based routing interface
<InterfaceNumber>.
Informational
Assigning VLAN ID to routing interface.
<ID> ID
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Best route change request failed for VRF <VrfID>. VRF not initialized.
Informational
VRF not initialized.
<VrfID> ID of Virtual Routing and Forwarding Instance
Buffer pool create failed
584 December/2018
FUJITSU PSWITCH
Informational
Buffer pool create failed
Message Collection
Cannot find router interface number for port based routing interface <InterfaceNumber>.
Informational
Failed to get interface type for interface.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Cannot find rtrIntf for port based routing interface
<InterfaceNumber>.
Informational
Failed to find routing interface number by interface number.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Cannot release VLAN <VlanID> for port based routing interface
<InterfaceNumber>.
Informational
Failed to release VLAN for routing interface.
<VlanID> VLAN ID
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Error checkpointing internal VLAN mapping for port-based routing interface.
Informational
Error checkpointing internal VLAN mapping for port-based routing interface.
Error: rto.c osapiSemaGive
Informational
Failed to give semaphore.
Error: rto.c osapiWriteLockGive
December/2018 585
Message Collection
Informational
Failed to give write lock.
FUJITSU PSWITCH
Error: rto6.c osapiWriteLockGive
Informational
Failed to give write lock.
Failed to add NHRes to <IPAddress> to the routing table.
Informational
Routing table is full.
<IPAddress> ip_address, or, ipv6_address, or hostname
Failed to checkpoint internal VLAN ID for port based routing interface <InterfaceNumber>.
Informational
Failed to send a message to checkpoint message queue.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to get interface type for interface <InterfaceNumber>.
Informational
Failed to get interface type for interface.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to get router interface number for port based routing interface <InterfaceNumber>.
Informational
Failed to find routing interface number by interface number.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to get the intf from configId.
586 December/2018
FUJITSU PSWITCH
Informational
Failed to get the interface number.
Message Collection
Failed! the peer info doesn't exist on interface <InterfaceNumber>
Informational
No route installed but received delete request!
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed! the peer info doesn't match on interface <InterfaceNumber>
Informational
Received delete request for incorrect peer IP
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Incorrect ICMP header length when generating ICMP error message
Informational
ICMP packet length has problem.
Invalid buffer pool size: buff_count = <GetValue>, num_buffers =
<MaxValue>
Informational
Detected invalid buffer pool size, The number of buffers in the pool should be equal to the number of buffers we want
<GetValue> Get Value
<MaxValue> Maximum value
ipMapDefaultRoutingVlanCreateEventNotify: Failed to notify registrar_ID <ComponentID> mgmtVlanId <VlanID> routingIntIfNum
<InterfaceNumber>
December/2018 587
Message Collection
Informational
FUJITSU PSWITCH
Failed to notify subscribers about creation of the routing interface for the management VLAN
<ComponentID> Component ID
<VlanID> VLAN ID
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
On interface <InterfaceNumber>, setting IPv4 MTU to <SetValue> because of a change to the link MTU. If the IPv4 MTU is not configured on an interface based on the link MTU of the interface.
Informational
An information message about updating IPv4 MTU.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<SetValue> Set Value
OS_XX_Print: unable to send message for printing
Informational
OS_XX_Print: unable to send message for printing
Out of memory
Informational
Out of memory
Releasing VLAN ID <VlanID> from port based routing interface
<InterfaceNumber>.
Informational
Releasing VLAN ID to routing interface.
<VlanID> VLAN ID
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
RPPI Route Protocol Service. Pending client
<IPRoutingProtocolType> found in VRF instance <VrfID>
588 December/2018
FUJITSU PSWITCH
Informational
Message Collection
A protocol is registered in the VRF
<IPRoutingProtocolType> L7_IPRT_(RIP/VRRP/OSPF/MGMD/PIMDM/...)
<VrfID> ID of Virtual Routing and Forwarding Instance
RTO failed to delete a modified route left with no active next hops.
Informational
Routing table has failed to delete a route in VRF.
Unable to malloc memory for network interfaces
Informational
Unable to malloc memory for network interfaces
<InterfaceNumber>: Failed to Set Interface IP Address to 0, error
<ErrorMessage>
Notice
Failed to Set Interface IP Address to 0.0.0.0 when deleting the primary ipv4 address in stack.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<ErrorMessage> Error message
<NsfProtocolName> instance completed NSF routes update.
Notice
Notify that a protocol has added NSF routes.
<NsfProtocolName> The name of NSF protocol
<NsfProtocolName> instance of VRF <VrfName> (VRF-ID <VrfID>) completed NSF routes update.
December/2018 589
Message Collection
Notice
FUJITSU PSWITCH
Notify that a protocol from VRF has added NSF routes.
<NsfProtocolName> The name of NSF protocol
<VrfName>
<VrfID>
Name of Virtual Routing and Forwarding Instance
ID of Virtual Routing and Forwarding Instance
<NsfProtocolName> instance of VRF <VrfName> (VRF-ID <VrfID>) to provide NSF routes
Notice
Notify that a protocol from VRF wants to add NSF routes.
<NsfProtocolName> The name of NSF protocol
<VrfName> Name of Virtual Routing and Forwarding Instance
<VrfID> ID of Virtual Routing and Forwarding Instance
<NsfProtocolName> instance to provide NSF routes
Notice
Notify that a protocol wants to add NSF routes.
<NsfProtocolName> The name of NSF protocol
Added RPPI routing policy client <ClientName>.
Notice
Successfully added a RPPI routing policy client.
<ClientName> Client name would display which routing protocol (BGP,
OSPF, ...) redistributes the best route
Could not set forwarding mode in driver for VRF:<VrfID>
Notice
Failed to set IPv4 forwarding mode in driver for VRF.
<VrfID> ID of Virtual Routing and Forwarding Instance
Error accessing IPMAP config data for interface <InterfaceNumber> in ipMapMapIntfIsConfigurable.
590 December/2018
FUJITSU PSWITCH
Notice
Message Collection
We may have a table management error between ipMapCfg and ipMapMapTbl or there is synchronization issue between NIM and components w.r.t. interface creation/deletion
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Error on call to osapiFsWrite routine on config file <FileName>
Notice
Failed to save binary configuration file.
<FileName> Log is created by this file.
Failed to create RTO global read-write lock.
Notice
Failed to create read-write lock
Failed to create RTO VR read-write lock for VRID <VrfID>.
Notice
Failed to create read-write lock
<VrfID> ID of Virtual Routing and Forwarding Instance
Failed to create the routing interface for the interface
<InterfaceNumber>
Notice
Failed to create the routing interface.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to delete IP address <IPAddress>. Reason: unable to find layer 3 interface information for the interface <InterfaceNumber>
(<InterfaceNumber>)
December/2018 591
Message Collection
Notice
FUJITSU PSWITCH
Unable to find layer 3 interface information for the interface
<IPAddress> ip_address, or, ipv6_address, or hostname
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to delete IP address <IPAddress>. Reason: unable to find matching IP Address <IPAddress>/<Mask> on the interface
<InterfaceNumber> (<InterfaceNumber>)
Notice
Unable to find matching the IP Address on the interface
<IPAddress> ip_address, or, ipv6_address, or hostname
<Mask> Mask value
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to find IPMAP instance
Notice
Failed to find IPMAP instance
Failed to find IPMAP instance for interface <InterfaceNumber>
Notice
Failed to retrieve IP information about this interface.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to find IPMAP instance for VRF <VrfName>
Notice
IPMAP fails to find the VRF instance for VRF.
<VrfName> Name of Virtual Routing and Forwarding Instance
Failed to find IPMAP instance for VRF-ID <VrfID>
592 December/2018
FUJITSU PSWITCH
Notice
Message Collection
Failed to retrieve IP information about this VRF.
<VrfID> ID of Virtual Routing and Forwarding Instance
Failed to insert VRF name <VrfName> into name-to-id table
Notice
Failed to insert VRF name into name-to-id table
<VrfName> Name of Virtual Routing and Forwarding Instance
Failed to queue ARP packet to IP MAP forwarding thread.
Notice
Failed to queue ARP packet to IP MAP forwarding thread message queue.
Failed to queue IP packet to IP MAP forwarding thread queue
<Priority>.
Notice
Failed to queue IP packet to IP MAP forwarding thread message queue.
<Priority> Priority
Failed to rx data on packet socket for (VRF - <VrfName>, interface
- <InterfaceNumber>), errno <ErrorCode>
Notice
Failed to receive data on packet socket for VRF
<VrfName> Name of Virtual Routing and Forwarding Instance
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<ErrorCode>
0/1, 0/0/1
Error code
Failed to tx data to packet socket for (VRF - <VrfName>, interface
- <InterfaceNumber>), errno <ErrorCode>
December/2018 593
Message Collection
Notice
FUJITSU PSWITCH
Failed to transmit data on packet socket for VRF
<VrfName> Name of Virtual Routing and Forwarding Instance
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<ErrorCode> Error code
Internal vlan not available to allot to interface
<InterfaceNumber>.
Notice
VLAN is not available on this interface.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
IP MAP reporting completion of L3 hardware updates.
Notice
IP MAP reporting completion of L3 hardware updates.
IPMAP instance created for VRF name <VrfName> with VRF-ID <VlanID>
Notice
IPMAP instance for VRF is successfully created.
<VrfName> Name of Virtual Routing and Forwarding Instance
<VlanID> VLAN ID
ipMapAsyncEventCompleteQueue: osapiMessageSend failed
Notice
Failed to queue an event to IP MAP message queue.
ipStatsCreate: Could not create ip driver counters
Notice
Failed to create a counter in statistic module. Please look for statistic manager log.
ipStatsCreate: Could not create ip external counters
594 December/2018
FUJITSU PSWITCH
Notice
Message Collection
Failed to create a counter in statistic module. Please look for statistic manager log.
ipStatsCreate: Could not create ip mutant counters
Notice
Failed to create a counter in statistic module. Please look for statistic manager log.
ipStatsDelete: Could not delete IP driver counters
Notice
Failed to create a counter in statistic module. Please look for statistic manager log.
ipStatsDelete: Could not delete IP external counters
Notice
Failed to create a counter in statistic module. Please look for statistic manager log.
ipStatsDelete: Could not delete IP mutant counters
Notice
Failed to create a counter in statistic module. Please look for statistic manager log.
ipStatsReset: Could not reset ip driver counters
Notice
Failed to create a counter in statistic module. Please look for statistic manager log.
ipStatsReset: Could not reset ip external counters
December/2018 595
Message Collection
Notice
FUJITSU PSWITCH
Failed to create a counter in statistic module. Please look for statistic manager log.
ipStatsReset: Could not reset ip mutant counters
Notice
Failed to create a counter in statistic module. Please look for statistic manager log.
Received ICMP packet with bad packet type <PacketType>
Notice
Received ICMP packet with bad packet type.
<PacketType> Packet type
Registered IPMAP-<VrfID> as a best route callback with RTO
Notice
Successfully registered best route callback with routing table.
<VrfID> ID of Virtual Routing and Forwarding Instance
Removed RPPI routing policy client <ClientName>.
Notice
Successfully removed a RPPI routing policy client.
<ClientName> Client name would display which routing protocol (BGP,
OSPF, ...) redistributes the best route
Replacing RPPI policy client with duplicate name <ClientName>
Notice
Replacing RPPI policy client with duplicate name.
<ClientName> Client name would display which routing protocol (BGP,
OSPF, ...) redistributes the best route
Route lookup to invalid destination IP address <IPAddress>.
596 December/2018
FUJITSU PSWITCH
Notice
Message Collection
Route is trying to lookup an invaild destination IP address.
<IPAddress> ip_address, or, ipv6_address, or hostname
Stale route timer for VRF-ID <VrfID> expired. No routes from
<NsfProtocolName>.
Notice
A notification about expired stale route.
<VrfID> ID of Virtual Routing and Forwarding Instance
<NsfProtocolName> The name of NSF protocol
Unable to get name IP stack uses for interface <InterfaceNumber>.
Notice
Failed to get interface name from OS.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
VRF instance created for VRF name <VrfName> with VRF-ID <VrfID>
Notice
VRF is successfully created.
<VrfName> Name of Virtual Routing and Forwarding Instance
<VrfID> ID of Virtual Routing and Forwarding Instance
VRF instance deleted for VRF name <VrfName> with VRF-ID <VrfID>
Notice
VRF is successfully deleted.
<VrfName> Name of Virtual Routing and Forwarding Instance
<VrfID> ID of Virtual Routing and Forwarding Instance
VRF name <VrfName> already exists in name-to-id table with VRF ID
<VrfID>
December/2018 597
Message Collection
Notice
FUJITSU PSWITCH
VRF name already exists in name-to-id table
<VrfName> Name of Virtual Routing and Forwarding Instance
<VrfID> ID of Virtual Routing and Forwarding Instance
Async event client <ClientName> did not respond.
Warning
Also report who didn't respond when reporting a router timeout event.
<ClientName> Client name would display which routing protocol (BGP,
OSPF, ...) redistributes the best route
Async event client <ClientName> reported failure.
Warning
Report who reported a failure event.
<ClientName> Client name would display which routing protocol (BGP,
OSPF, ...) redistributes the best route
Attempt to deregister policy client with an unregistered name,
<ClientName>.
Warning
Attempt to deregister policy client with inexistent name.
<ClientName> Client name would display which routing protocol (BGP,
OSPF, ...) redistributes the best route
Event failure reason <EventID> for event
<EventID><InterfaceNumber>
Warning
Other failure reasons for event.
<EventID> Event ID
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to add the default gateway route learned via DHCP to RTO on interface <InterfaceNumber>
598 December/2018
FUJITSU PSWITCH
Warning
Message Collection
Failed to add the default gateway route learned via DHCP to routing table on the interface.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to create VRF(<VrfName>) due to insufficient memory
Warning
Failed to create VRF due to insufficient memory
<VrfName> Name of Virtual Routing and Forwarding Instance
Failed to find RPPI <FamilyType> best route client with RTO registration ID <ID>.
Warning
Failed to find RPPI best route client with routing table registration ID
<FamilyType> type indicate ipv4 or ipv6(ex. L7_AF_INET, L7_AF_INET6,...) or generic family type
<ID> ID
Failed to find RTO client for route change request.
Warning
Failed to find routing table client for route change request.
Received interface change while in phase <SetValue>
Warning
Unexpected callback while in init phase.
<SetValue> Set Value
Request to register RPPI <FamilyType> best route client
<ClientName> denied because the maximum number of clients,
<MaxValue>, are already registered.
December/2018 599
Message Collection
Warning
FUJITSU PSWITCH
Maximum number of clients reached.
<FamilyType> type indicate ipv4 or ipv6(ex. L7_AF_INET, L7_AF_INET6,...) or
<ClientName>
<MaxValue> generic family type
Client name would display which routing protocol (BGP,
OSPF, ...) redistributes the best route
Maximum value
Request to register RPPI <FamilyType> router client <ClientName> denied because the maximum number of clients, <MaxValue>, are already registered.
Warning
Maximum number of clients reached.
<FamilyType> type indicate ipv4 or ipv6(ex. L7_AF_INET, L7_AF_INET6,...) or
<ClientName>
<MaxValue> generic family type
Client name would display which routing protocol (BGP,
OSPF, ...) redistributes the best route
Maximum value
Request to register RPPI policy client <ClientName> denied because the maximum number of clients, <MaxValue>, are already registered.
Warning
Maximum number of clients reached.
<ClientName> Client name would display which routing protocol (BGP,
OSPF, ...) redistributes the best route
<MaxValue> Maximum value
Router event timeout for event <EventID><InterfaceNumber>.
Warning
Report a router timeout event.
<EventID> Event ID
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Routing heap memory allocation at <SizeValue> percent.
<SizeValue> of <SizeValue> bytes allocated.
600 December/2018
FUJITSU PSWITCH
Warning
Message Collection
Routing heap is nearly exhausted!
<SizeValue> An integer for a specific range or a limit value.
RPPI routing policy client <ClientName> failed to acknowledge policy change. Deregistering client.
Warning
A RPPI routing policy client failed to acknowledge policy change. Deregistering client.
<ClientName> Client name would display which routing protocol (BGP,
OSPF, ...) redistributes the best route
RTO is full. Routing table contains no free routes. The routing table manager stores a limited number of best routes. Either the configured route limit is reached or available routes in the hardware are exhausted.
Warning
Routing table is full. Routing table contains no free routes. The routing table manager stores a limited number of best routes. Either the configured route limit is reached or available routes in the hardware are exhausted.
RTO Route Add failed for Kernel IPv6 route as max ecmp routes reached
Warning
Max ECMP routes reached
RTO Route Add failed for Kernel route as max ecmp routes reached for VRF named <VrfName>
Warning
Max ECMP routes reached for VRF.
<VrfName> Name of Virtual Routing and Forwarding Instance
The number of routes in RTO of VRF <VrfName> has exceeded the threshold of <ThresholdValue>.
December/2018 601
Message Collection
Warning
FUJITSU PSWITCH
The number of routes in VRF routing table has exceeded the threshold.
<VrfName> Name of Virtual Routing and Forwarding Instance
<ThresholdValue> The value for general threshold setting
The number of routes in VRF <VrfName> routing table has exceeded the configured threshold of <ThresholdValue>.
Warning
The number of routes in VRF routing table has exceeded the threshold.
<VrfName> Name of Virtual Routing and Forwarding Instance
<ThresholdValue> The value for general threshold setting
The routing table is using <CountValue> of a maximum of <MaxValue> unique next hops. If the next hop table fills, the routing table may not be able to add new routes.
Warning
A warning when next hop table is 90% full. The routing table may not be able to add new routes soon.
<CountValue> Count Value
<MaxValue> Maximum value
Unable to assign an internal VLAN ID to interface
<InterfaceNumber>.
Warning
Unable to assign an internal VLAN ID to interface.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
VRF <VrfName> already exists with VRF-Id <VrfID>
Warning
VRF already exists
<VrfName>
<VrfID>
Name of Virtual Routing and Forwarding Instance
ID of Virtual Routing and Forwarding Instance
VRF-Id <VrfID> already assigned, allocating another Id for VRF
<VrfName>
602 December/2018
FUJITSU PSWITCH
Warning
Message Collection
VRF-Id already assigned, allocating another Id for VRF.
<VrfID> ID of Virtual Routing and Forwarding Instance
<VrfName> Name of Virtual Routing and Forwarding Instance
2.1.33.
IP_HELPER
Unable to allocate buffer for pseudo header
Critical
IP hepler pseudo header memory allocate failed
Unable to create semaphore for IP Helper
Critical
Create IP helper semaphore failed
Error allocating IP helper info structure
Emergency
IP helper information structure memory allocate failed
Failed to allocate buffer pool for IP helper server list
Emergency
IP helper allocate server list memory failed
Failed to allocate IP helper packet pool
Emergency
IP helper packet buffer memory allocate failed
Failed to create IP helper packet pool
Emergency
Create IP helper packet pool failed
Failed to create relay entry list
December/2018 603
Message Collection
Emergency
Create IP helper entry list failed
Cannot find new IP helper AVL entry
Error
IP helper find new entry failed
Failed to delete IP helper server AVL tree
Error
Removed IP helper entry failed
FUJITSU PSWITCH
Failed to enqueue NIM startup event <NimStartupPhaseNumber>
Error
Send NIM startup event to DHCP relay queue failed
<NimStartupPhaseNumber> NIM startup phase number
Failed to get MAC address for interface <InterfaceNumber>
Error
Getting interface MAC address failed
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
NIM event <ID> enqueue failed
Error
Send NIM event to DHCP relay queue
<ID> ID
Processing unexpected NIM startup callback
<NimStartupPhaseNumber>
604 December/2018
FUJITSU PSWITCH
Error
Failed to enqueue NIM startup event
<NimStartupPhaseNumber> NIM startup phase number
Message Collection
Received an invalid udp relay pkt from interface <InterfaceNumber>
Src ip <IPAddress>: Src port <IPPortNumber> Dst ip <IPAddress>: Dst port <IPPortNumber> len <LengthValue>
Error
Received invalid DHCP packet
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<IPAddress>
<IPPortNumber>
<LengthValue>
0/1, 0/0/1 ip_address, or, ipv6_address, or hostname
UDP or TCP port number, ex:8000, 21 ipv6 prefix length
Unable to allocate the IP helper server list
Error
IP helper allocate sevrer tree list failed
Unable to allocate the IP helper server list data heap
Error
IP helper allocate sevrer list data heap failed
<FileName> <FileLineNumber>: <FunctionName>: Invalid command/request pair
Informational
IP helper parse invalid command / request
<FileName> Log is created by this file.
<FileLineNumber> Log is created by this line.
<FunctionName> Log is created by this function.
[VRF "<VrfName>"] DHCP client message received on port
<InterfaceNumber> VLAN <VlanID> from client <MacAddress> has "
"seconds field set to <SetValue>. Value is less than the minimum
<MinValue>. Droppping.
December/2018 605
Message Collection
Informational
FUJITSU PSWITCH
Dropped DHCP client message when message seconds less than value
<VrfName> Name of Virtual Routing and Forwarding Instance
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<VlanID>
<MacAddress>
VLAN ID
MAC address
<SetValue>
<MinValue>
Set Value
Minimum value
Failed to create IP helper task
Informational
Create IP helper task failed
Unable to create IP helper message queue
Informational
Create IP helper message queue failed
Unable to synchronize with IP helper task
Informational
IP helper synchronize failed
[VRF "<VrfName>"] DHCP client message received on port
<InterfaceNumber> VLAN <VlanID> from client <MacAddress> has giaddr set to local address <IPAddress>. Dropping
Notice
Dropped DHCP client message when message giaddr is local address
<VrfName> Name of Virtual Routing and Forwarding Instance
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<VlanID>
<MacAddress>
<IPAddress>
0/1, 0/0/1
VLAN ID
MAC address ip_address, or, ipv6_address, or hostname
[VRF "<VrfName>"] DHCP client message received on port
<InterfaceNumber> VLAN <VlanID> has hops set to <SetValue>. Value exceeds maximum <MaxValue>. Dropping
606 December/2018
FUJITSU PSWITCH
Notice
Message Collection
Dropped DHCP client message when message hops exceeds maximum value
<VrfName> Name of Virtual Routing and Forwarding Instance
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<VlanID>
<SetValue>
<MaxValue>
VLAN ID
Set Value
Maximum value
[VRF "<VrfName>"] Invalid DHCP packet type <TypeValue> in packet from <IPAddress> on port <InterfaceNumber> VLAN <VlanID>
Notice
Received invalid DHCP type packet
<VrfName> Name of Virtual Routing and Forwarding Instance
<TypeValue>
<IPAddress>
Type Value ip_address, or, ipv6_address, or hostname
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<VlanID> VLAN ID
DHCP relay configured to insert option 82, but option not found in message returned from server <IPAddress>
Notice
DHCP relay configured to insert option 82, but server respond message not found
<IPAddress> ip_address, or, ipv6_address, or hostname
Received an interface callback while outside the EXECUTE state
Notice
DHCP relay received an interface callback while outside the execute state
Received invalid message ID <ID> on message queue
Notice
IP helper task received invalid message on message queue
<ID> ID
[VRF "<VrfName>"] Failed to relay DHCP client packet to DHCP server at <IPAddress>
December/2018 607
Message Collection
Warning
FUJITSU PSWITCH
IP helper relay DHCP client packet to DHCP server failed
<VrfName> Name of Virtual Routing and Forwarding Instance
<IPAddress> ip_address, or, ipv6_address, or hostname
[VRF "<VrfName>"] Failed to send packet to server at <IPAddress> for UDP destination port <IPPortNumber>
Warning
Send DHCP packet to server failed
<VrfName> Name of Virtual Routing and Forwarding Instance
<IPAddress>
<IPPortNumber> ip_address, or, ipv6_address, or hostname
UDP or TCP port number, ex:8000, 21
Cannot configure more than <MaxValue> IP Helper entries
Warning
IP helper entries is full
<MaxValue> Maximum value
Circuit ID option contains unknown interface
<UnitNumber>/<SlotNumber>/<InterfaceNumber>
Warning
DHCP packet circuit ID include unknown interface
<UnitNumber> Unit number
<SlotNumber> Slot number
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to delete server address <IPAddress> for IP helper entry on interface <InterfaceNumber> and UDP port <IPPortNumber>
Warning
Removed server address for IP helper entry failed
<IPAddress> ip_address, or, ipv6_address, or hostname
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<IPPortNumber>
0/1, 0/0/1
UDP or TCP port number, ex:8000, 21
Failed to deregister packet intercept
608 December/2018
FUJITSU PSWITCH
Warning
De-register DHCP relay PDU callback function failed
Message Collection
Failed to register packet intercept
Warning
Register DHCP relay PDU callback function failed
The maximum number of IP Helper entries, <MaxValue>, has already been configured
Warning
IP helper entries is full
<MaxValue> Maximum value
2.1.34.
IPMAP
failed to open netlink socket
Error
Socket create fail.
Netlink socket: Set socket option failed for option SO_SNDBUF,
Error - <ErrorCode>
Error
Set socket option SO_SNDBUF is fail.
<ErrorCode> Error code
Netlink socket: Set socket option failed for option SO_RCVBUF,
Error - <ErrorCode>
Error
Set socket option SO_RCVBUF is fail.
<ErrorCode> Error code
Cannot bind netlink socket
December/2018 609
Message Collection
Error
Fail to bind the socket.
Cannot getsockname
Error
Fail to get the socket name.
Incorrect address length <Number>
Error
The IP address length is incorrect.
<Number> Number
FUJITSU PSWITCH
Incorrect address family <FamilyType>
Error
The IP address family is incorrect.
<FamilyType> type indicate ipv4 or ipv6(ex. L7_AF_INET, L7_AF_INET6,...) or generic family type
EOF on netlink
Error
The length of the receive packet is zero.
Unexpected sender address length == <IPAddressLength>
Error
The sender address length is incorrect.
<IPAddressLength> Length of the IPv4 address.
Truncated message encountered - msg flags <FlagType>
Error
The message flag is incorrect.
<FlagType> Message flag type.
Malformed message encountered: len=<LengthValue>
610 December/2018
FUJITSU PSWITCH
Error
The message length is incorrect.
<LengthValue> ipv6 prefix length
Message Collection
Encountered message remnant of size <LengthValue> after processing message
Error
Some packet data would not be processed.
<LengthValue> ipv6 prefix length
<FunctionName> : osapiMessageSend failed
Error
Fail to send the osapi message.
<FunctionName> Log is created by this function.
failed to open netlink socket
Critical
Socket create fail.
<FunctionName> : RtNetlink failed to listen to netlink socket.
Critical
Fail to listen the socket.
<FunctionName> Log is created by this function.
Action <ActionType> not supported.
Error
The action type is not support.
<ActionType> Action type.
2.1.35.
IPV6
Error creating checkpoint pending semaphore.
December/2018 611
Message Collection
Alert
Error creating checkpoint pending semaphore.
FUJITSU PSWITCH
Failed to allocate memory for IPv6.
Alert
Failed to allocate a block of memory.
Failed to send hardware route add fail event to IP6MAP thread
Alert
Failed to send hardware route add fail event to IP6MAP thread
Failed to send NIM startup phase <NimStartupPhaseNumber> to IP6MAP thread
Alert
Failed to send a message to message queue.
<NimStartupPhaseNumber> NIM startup phase number
Failed to send stale route timer expire event to IP6MAP thread
Alert
Failed to send stale route timer expire event to IP6MAP thread
Failure registering intercept for IPv6 packets.
Alert
Failure registering intercept for IPv6 packets.
RTO6 is full. Routing table contains <CountValue> best routes,
<CountValue> total routes. <CountValue> reserved local routes. The routing table manager stores a limited number of best routes. The count of total routes includes alternate routes, which are not installed in hardware.
612 December/2018
FUJITSU PSWITCH
Alert
Message Collection
The routing table manager stores a limited number of best routes. The count of total routes includes alternate routes, which are not installed in hardware.
<CountValue> Count Value
RTO6 radix tree lookup failed for route added. RTO6 database is in an inconsistent state.
Alert
IPv6 routing table database is in an inconsistent state. Database might be corrupted.
Unable to register IP6 Map NIM callbacks.
Alert
Failed to register a callback function from NIM module.
Failed to find RTO6 client for route change request.
Critical
Failed to find the client for route change request.
Failure initialing RTO change list for client <ClientName>.
Critical
Failure during initializing RTO change list.
<ClientName> Client name would display which routing protocol (BGP,
OSPF, ...) redistributes the best route
Purging destination <IP6Address>/<IP6Prefix> from routing table while best route exists.
Critical
Purging a destination from routing table while best route exists.
<IP6Address> IPv6 address
<IP6Prefix> The size in bits of the prefix
Attempt to register best route notification for <ClientName> callback twice with RTO6.
December/2018 613
Message Collection
Debug
FUJITSU PSWITCH
Attempt to register notification for same callback function twice.
<ClientName> Client name would display which routing protocol (BGP,
OSPF, ...) redistributes the best route
Failed to remove IPv6 address <IP6Address>/<IP6Prefix> on interface <InterfaceNumber> from IP stack.
Debug
Failed to remove a IPv6 address on an interface from IP stack.
<IP6Address> IPv6 address
<IP6Prefix> The size in bits of the prefix
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Best route client deregistration failed for <ClientName>
Error
Failed to find the client to deregister.
<ClientName> Client name would display which routing protocol (BGP,
OSPF, ...) redistributes the best route
Best route client registration failed for <ClientName>. NULL function pointer.
Error
Received a NULL function pointer.
<ClientName> Client name would display which routing protocol (BGP,
OSPF, ...) redistributes the best route
Cannot find new NDP entry for <IP6Address>.
Error
Failed to find new NDP gateway entry in AVL tree structure.
<IP6Address> IPv6 address
Error in IPv6 neighbor table state machine. Renewing neighbor in state <IP6State>.
614 December/2018
FUJITSU PSWITCH
Error
Unexpected ipv6 neighbor state.
<IP6State> Name of NDP state
Message Collection
Error purging change list. No stop.
Error
Cannot purge change list without stop pointer.
Failed to add unique next hop to next hops tree.
Error
Failed to add unique next hop to next hops AVL tree.
Failed to create interface <InterfaceNumber> with intIfNum
<InterfaceNumber>
Error
Failed to create an interface with an intIfNum.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to delete next hop group from group tree.
Error
Failed to delete next hop group from group tree.
Failed to delete unique next hop from next hops tree.
Error
Failed to delete unique next hop from next hops tree.
Failed to get link MTU from NIM for interface <InterfaceNumber>.
Error
Failed to get link MTU from NIM module for a interface.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to insert next hop group in next hop group tree.
December/2018 615
Message Collection
Error
Failed to insert next hop group in next hop group tree.
FUJITSU PSWITCH
Failed to send nbr solicit wait timer expire event to IP6MAP thread
Error
Failed to send a message to message queue.
Failed to set IPv6 neighbor stale time on interface
<InterfaceNumber> (<InterfaceNumber>).
Error
Failed to set IPv6 neighbor stale time on an interface.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to set IPv6 neighbor stale time. Unable to get interface name for interface <InterfaceNumber>.
Error
Could not retrieve interface name.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
First correlator is <CorrelatorValue>. Second correlator is
<CorrelatorValue>.
Error
IPv6 has more than one outstanding NIM callback on interface. It shows two correlator it has.
<CorrelatorValue> TLV value for setting ACL: type/identifier/rule number/rule action
For client <ClientName>, DELETE follows <TypeValue>.
616 December/2018
FUJITSU PSWITCH
Error
Message Collection
Error occurred during deleting change list.
<ClientName> Client name would display which routing protocol (BGP,
<TypeValue>
OSPF, ...) redistributes the best route
Type Value
For client <ClientName>, MODIFY follows DELETE.
Error
Error occurred during motifying change list.
<ClientName> Client name would display which routing protocol (BGP,
OSPF, ...) redistributes the best route
Interface structure already exists for interface
<InterfaceNumber> when L7_CREATE event received.
Error
Unexpected interface structure for this interface. It should not be an interface structure for this interface yet.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
IP6MAP received NIM startup <NimStartupPhaseNumber> callback while in init state <IP6State>
Error
Unexpected startup callback from NIM module.
<NimStartupPhaseNumber> NIM startup phase number
<IP6State> Name of NDP state
IPv6 has more than one outstanding NIM callback on interface
<InterfaceNumber>.
Error
IPv6 has more than one outstanding NIM callback on interface.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
IPv6 neighbor modify of <IP6Address> failed.
December/2018 617
Message Collection
Error
Failed to motify neighbor entry in hardware.
<IP6Address> IPv6 address
FUJITSU PSWITCH
On interface <InterfaceNumber>, attempted to set IPv6 MTU to
<SetValue> because of a change to the link MTU. IPv6 MTU change failed.
Error
IPv6 MTU change failed.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<SetValue>
0/1, 0/0/1
Set Value
Received invalid ip6 packet on <InterfaceNumber>: TC <GetValue>, flow <GetValue>, length <GetValue>, next head <GetValue>, hop lim
<GetValue>, src <GetValue>, dst <GetValue>.
Error
Invalid payload length packet
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<GetValue>
0/1, 0/0/1
Get Value
RTO6 next hops array is full. <MaxValue> current next hops.
Error
IPv6 routing table next hops array is full.
<MaxValue> Maximum value
rto6RouteCopy() asked to copy bad routeInfo object with <GetValue> next hops.
Error
Somehow the route excceed max Equal Cost entries.
<GetValue> Get Value
Unknown NIM startup event <TypeValue>
618 December/2018
FUJITSU PSWITCH
Error
Unknown NIM startup event.
<TypeValue> Type Value
Message Collection
Error: rto6.c osapiReadLockGive
Informational
Failed to give read lock.
Error: rto6.c osapiSemaGive
Informational
Failed to give a semaphore.
Error: rto6_debug.c osapiReadLockGive
Informational
Failed to give read lock.
Failed to add NHRes to <IP6Address> to the routing table.
Informational
The maximum route capacity is exceeded, cannot add new network.
<IP6Address> IPv6 address
Failed to add route to <IP6Address>/<IP6Prefix> via <IP6Address> on interface <InterfaceNumber> with flags <TypeValue> to IP stack with error <ErrorCode>.
Informational
Failed to add route to IP stack.
<IP6Address> IPv6 address
<IP6Prefix> The size in bits of the prefix
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<TypeValue>
<ErrorCode>
Type Value
Error code
Failed to delete route to <IP6Address>/<IP6Prefix> on interface
<InterfaceNumber> with flags <TypeValue> in IP stack.
December/2018 619
Message Collection
Informational
FUJITSU PSWITCH
Failed to delete route from IP stack.
<IP6Address> IPv6 address
<IP6Prefix> The size in bits of the prefix
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<TypeValue>
0/1, 0/0/1
Type Value
IP stack reports unknown IPv6 address <IP6Address> active on interface <InterfaceNumber>.
Informational
An unknown IPv6 address is active on an interface.
<IP6Address> IPv6 address
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
L7_ping6: cant setsockopt
Informational
Failed to set a socket option.
On interface <InterfaceNumber>, setting IPv6 MTU to <SetValue> because of a change to the link MTU. If the IPv6 MTU is not configured on an interface, it is automatically adjusted based on the link MTU of the interface.
Informational
If the IPv6 MTU is not configured on an interface, it is automatically adjusted based on the link MTU of the interface.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<SetValue>
0/1, 0/0/1
Set Value
RTO6: Failed to add <IP6Address>/<IP6Prefix> to the hardware forwarding table.
620 December/2018
FUJITSU PSWITCH
Informational
Failed to add route to the hardware forwarding table.
<IP6Address> IPv6 address
<IP6Prefix> The size in bits of the prefix
Message Collection
RTO6: Failed to delete <IP6Address>/<IP6Prefix> to the hardware routing table.
Informational
Failed to delete route from the hardware forwarding table.
<IP6Address> IPv6 address
<IP6Prefix> The size in bits of the prefix
RTO6: Failed to modify <IP6Address>/<IP6Prefix> in the hardware forwarding table.
Informational
Failed to motify route in the hardware forwarding table.
<IP6Address> IPv6 address
<IP6Prefix> The size in bits of the prefix
rto6_notify.c: stack add route failed
Informational
Failed to add route to IP stack.
rto6_notify.c: stack delete route failed
Informational
Failed to delete route from IP stack.
rto6IsFull: RouteInfoList empty
Informational
RouteInfoList is empty when calling rto6IsFull().
<FunctionName>: Cannot find new NDP Gateway entry for <IP6Address>
December/2018 621
Message Collection
Notice
Failed to find new NDP gateway entry in AVL tree structure.
<FunctionName> Log is created by this function.
<IP6Address> IPv6 address
FUJITSU PSWITCH
<FunctionName>: Could not delete AVL tree semaphore, id=<ID>
Notice
Failed to delete semaphore.
<FunctionName> Log is created by this function.
<ID> ID
<FunctionName>: Negative ndp neighbor count is less than zero
Notice
Negative ndp neighbor count is less than zero
<FunctionName> Log is created by this function.
<FunctionName>: Unable to allocate Gateway Table data heap
Notice
Failed to allocate a block of memory.
<FunctionName> Log is created by this function.
<FunctionName>: Unable to allocate Gateway Table tree heap
Notice
Failed to allocate a block of memory.
<FunctionName> Log is created by this function.
<FunctionName>: Unable to allocate static Neighbor Table data heap
Notice
Failed to allocate a block of memory.
<FunctionName> Log is created by this function.
<FunctionName>: Unable to allocate static Neighbor Table tree heap
622 December/2018
FUJITSU PSWITCH
Notice
Failed to allocate a block of memory.
<FunctionName> Log is created by this function.
<FunctionName>: unexpected 0 reference count
Notice
Unexpected zero reference count
<FunctionName> Log is created by this function.
Message Collection
dtlIpv6RouteEntryDeleteVrfid: failed
Notice
Failed to delete a route from hardware.
Error accessing IP6MAP config data for interface
<InterfaceNumber> in ip6MapMapIntfIsConfigurable.
Notice
We may have a table management error between ip6MapCfg and ip6Map->intIfToCfgIndex or there is synchronization issue between NIM and components w.r.t. interface creation/deletion
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to add IPv6 address <IP6Address>/<IP6Prefix> on interface
<InterfaceNumber> to IP stack.
Notice
Failed to add a IPv6 address on an interface to IP stack.
<IP6Address> IPv6 address
<IP6Prefix> The size in bits of the prefix
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to add static route to <IP6Address>/<IP6Prefix> do RTO6.
December/2018 623
Message Collection
Notice
Failed to add a static route to ipv6 routing table.
<IP6Address> IPv6 address
<IP6Prefix> The size in bits of the prefix
FUJITSU PSWITCH
Failed to create RTO6 read-write lock.
Notice
Failed to create a read-write lock.
Failed to delete static route to <IP6Address>/<IP6Prefix> from
RTO6.
Notice
Failed to delete a static route to ipv6 routing table.
<IP6Address> IPv6 address
<IP6Prefix> The size in bits of the prefix
Failed to disable autostate on the interface <InterfaceNumber>.
Notice
Failed to disable autostate on the interface.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to enable autostate on the interface <InterfaceNumber>.
Notice
Failed to enable autostate on the interface.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to modify static route to <IP6Address>/<IP6Prefix> to RTO6.
Notice
Failed to motify a static route to ipv6 routing table.
<IP6Address> IPv6 address
<IP6Prefix> The size in bits of the prefix
Failed to rate limit <SetValue> pps in h/w for unresolved IPv6 packets coming to CPU.
624 December/2018
FUJITSU PSWITCH
Notice
Message Collection
Failed to rate limit in hardware for unresolved IPv6 packets coming to CPU.
<SetValue> Set Value
ip6MapApplyConfigData:cannot reserve local route
Notice
Failed to reserves a route in the route tables database.
ip6MapAsyncEventCompleteQueue: osapiMessageSend failed
Notice
Failed to send a message to message queue.
ip6MapDtlForwardingModeSet: failed
Notice
Failed to set fowarding status in hardware.
ip6MapDtlIntfAddrAdd: add of <IP6Address> failed
Notice
Failed to add Ipv6 address to hardware.
<IP6Address> IPv6 address
ip6MapDtlIntfAddrDel: add of <IP6Address> failed
Notice
Failed to delete Ipv6 address from hardware.
<IP6Address> IPv6 address
ip6MapDtlNbrAdd: add of <IP6Address> failed.
Notice
Failed to add neighbor entry to hardware.
<IP6Address> IPv6 address
ip6MapDtlNbrDelete: del of <IP6Address> failed
December/2018 625
Message Collection
Notice
Failed to delete neighbor entry from hardware.
<IP6Address> IPv6 address
FUJITSU PSWITCH
ip6MapIntfAddressEnable: genPrefix not found
Notice
the general prefix of specific IPv6 prefix is not found.
ip6MapIntfAddrNotify: address to rto failed
Notice
Failed to add a route to the routing table.
ip6MapIntfAddrNotify: bad cfgAddr
Notice
Invaild IPv6 address.
ip6MapIntfAddrNotify: rto address delete failed
Notice
Failed to delete a route from the routing table.
ip6MapIntfCreate: create link local failed
Notice
Failed to create link local address.
ip6MapIntfIcmpRedirectsModeApply: failed to set ICMPv6 redirects mode in DTL.
Notice
Failed to set ICMPv6 redirects mode in hardware.
ip6MapIntfIcmpRedirectsModeApply: failed to set ICMPv6 redirects mode on IPv6 Stack.
626 December/2018
FUJITSU PSWITCH
Notice
Failed to set ICMPv6 redirects mode on IPv6 Stack.
Message Collection
ip6MapIntfIcmpUnreachablesModeApply: failed to Set Dest
Unreachables mode on IPv6 Stack. When issued changing the mode of sending ICMP v6 Destination Unreachables to linux or Vxworks Stack where the support is not present.
Notice
When issued changing the mode of sending ICMP v6 Destination Unreachables to linux or Vxworks Stack where the support is not present.
ip6MapIntfMtuApply: failed to get mtu from nim
Notice
Failed to get link MTU from NIM module for a interface.
ip6MapIntfMtuApply: failed to send mtu to dtl
Notice
Failed to send MTU to hardware.
ip6MapIntfMtuApply: failed to send mtu to stack
Notice
Failed to send MTU to IP stack.
ip6MapNDiscTask: cant bind netlink socket
Notice
Failed to bind a netlink socket.
ip6MapNDiscTask: cant create pipe
Notice
Failed to create a pipe for control message.
ip6MapNDiscTask: cant open netlink socket
December/2018 627
Message Collection
Notice
Failed to open a netlink socket.
ip6MapNDiscTask: cant open pipe
Notice
Failed to open a pipe for control message.
ip6MapNDiscTask: cant read pipe
Notice
Failed to read the pipe.
ip6MapNDiscTask: error selecting
Notice
Failed to retrieve messages from selecting.
ip6MapNDiscTask: netlink packet too big
Notice
The size of netlink packet too big.
ip6MapRadvdTask: cant alloc mem
Notice
Failed to allocate a block of memory.
ip6MapRadvdTask: cant bind
Notice
Failed to bind a socket.
ip6MapRadvdTask: cant create pipe
Notice
Failed to create a pipe for control message.
ip6MapRadvdTask: cant create sema
628
FUJITSU PSWITCH
December/2018
FUJITSU PSWITCH
Notice
Failed to create a semaphore.
ip6MapRadvdTask: cant enable all-rtrs mcast
Notice
Failed to set a socket option: cannot join a multicast group.
ip6MapRadvdTask: cant open net socket
Notice
Failed to create a socket.
Message Collection
ip6MapRadvdTask: cant open pipe
Notice
Failed to open a pipe for control message.
ip6MapRadvdTask: cant read pipe
Notice
Failed to read the pipe.
ip6MapRadvdTask: cant set nonblocking
Notice
Failed to set a socket option.
ip6MapRadvdTask: cant setsockopt
Notice
Failed to set a socket option.
ip6MapRadvdTask: error selecting
Notice
Failed to retrieve messages from selecting.
ip6MapRadvdTask: invalid active interface
December/2018 629
Message Collection
Notice
FUJITSU PSWITCH
Cannot send router advertisement to an inactive/disabled interface.
ip6MapRtrAdminModeSet failed
Notice
Failed to enable or disable IPv6 routing.
ip6MapRtrIntfModeSet osapiMessageSend failed
Notice
Failed to send a message to message queue.
RTO6 no longer full. Routing table contains <CountValue> best routes, <CountValue> total routes
Notice
IPv6 routing table is no longer full.
<CountValue> Count Value
<IP6MapNsfProtocolName> failed to report completion of routing table update
Warning
Failed to create a correlator and populate associated event data.
<IP6MapNsfProtocolName> RIP, OSPF or BGP
Duplicate address detection failed for link local address
<IP6Address> on interface <InterfaceNumber>. Bounce interface to retry.
630 December/2018
FUJITSU PSWITCH
Warning
Message Collection
Duplicate address link local address on the interface.
<IP6Address> IPv6 address
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Event timeout for event <TypeValue><InterfaceNumber>. IP MAP notifies other layer 3 applications when certain events occur.
These events include such things as routing interface state changes and global routing state changes. If an application does not acknowledge receipt of the event within a timeout period, IP MAP logs this message.
Warning
IP MAP notifies other layer 3 applications when certain events occur. These events include such things as routing interface state changes and global routing state changes. If an application does not acknowledge receipt of the event within a timeout period, IP MAP logs this message.
<TypeValue> Type Value
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Received interface change while in phase <IP6State>
Warning
Received a change during a certain configurator state.
<IP6State> Name of NDP state
The IPv6 routing table is using <CountValue> of a maximum of
<MaxValue> unique next hops. If the next hop table fills, the routing table may not be able to add new routes.
December/2018 631
Message Collection
Warning
FUJITSU PSWITCH
If the next hop table fills, the routing table may not be able to add new routes.
<CountValue> Count Value
<MaxValue> Maximum value
2.1.36.
LAYER3
Failed to add ARP entry for RFC5549 interface. Error <ErrorCode>
(<ErrorMessage>).
Error
Failed to add ARP entry for RFC5549 interface.
<ErrorCode> Error code
<ErrorMessage> Error message
Failed to add IP address on RFC5549 interface.
Error
Failed to add IP address on RFC5549 interface.
Failed to enable RFC5549 interface.
Error
Failed to enable RFC5549 interface.
Failed to open the socket to add ARP entry for RFC5549 interface.
Error <ErrorCode> (<ErrorMessage>).
Error
Failed to create a socket.
<ErrorCode> Error code
<ErrorMessage> Error message
Tech Support Registration failed for Layer3 related commands
632 December/2018
FUJITSU PSWITCH
Informational
Message Collection
Failed to register a callback function from Tech Support module.
Could not retrieve router interface number for interface
<InterfaceNumber>.
Notice
Could not retrieve router interface number for an interface.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
End driver initialization not complete.
Notice
Layer 3 is not initialized yet.
End driver initialization not yet done.
Notice
Layer 3 is not initialized yet.
Failed to create the router interface <InterfaceNumber>
(<InterfaceNumber>). Reason: layer 3 is not initialized yet.
Notice
Layer 3 is not initialized yet.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to delete IP address on interface <InterfaceNumber> in IP stack. Error is <ErrorMessage>
Notice
Failed to delete IP address on an interface in IP stack.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<ErrorMessage>
0/1, 0/0/1
Error message
Failed to disable router interface <InterfaceNumber> in the IP stack.
December/2018 633
Message Collection
Notice
FUJITSU PSWITCH
Failed to disable a router interface.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to get interface <InterfaceNumber> routing metric from IP stack.
Notice
Could not retrieve routing metric of an interface.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to get interface <InterfaceNumber> routing metric from the
IP stack. Interface is not active.
Notice
Admin status of the interface is disabled and inactive.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to get IP stack name for interface <InterfaceNumber>.
Notice
Could not retrieve interface name.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to get router interface number for interface
<InterfaceNumber>.
Notice
Could not retrieve router interface number for an interface.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to get router interface number for internal interface
<InterfaceNumber>.
634 December/2018
FUJITSU PSWITCH
Notice
Message Collection
Could not retrieve router interface number for an interface.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to open a socket to delete a route from the IP stack routing table.
Notice
Failed to create a socket.
Failed to open socket to add route to IP stack.
Notice
Failed to create a socket.
Failed to remove the router interface <InterfaceNumber>
(<InterfaceNumber>). Reason: layer 3 is not initialized yet.
Notice
Layer 3 is not initialized yet.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to send IP packet with the destination IP address
<IPAddress> to the software forwarding layer.
Notice
Failed to send IP packet to software fowarding layer during handling the packets destined to RFC5549 interface.
<IPAddress> ip_address, or, ipv6_address, or hostname
Failed to update the router interface info table and IP stack layer for the router interface <InterfaceNumber> (<InterfaceNumber>).
Reason: layer 3 is not initialized yet.
December/2018 635
Message Collection
Notice
FUJITSU PSWITCH
Layer 3 is not initialized yet.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
ip <IPAddress> is an invalid interface address
Notice
Input IP address is invaild. It shouldn't be zero or multicast address.
<IPAddress> ip_address, or, ipv6_address, or hostname
IP address <IPAddress> is invalid.
Notice
Input IP address is invaild. It shouldn't be zero or multicast address.
<IPAddress> ip_address, or, ipv6_address, or hostname
ipmRouterIfRemove: RouterIntfInitDone == L7_FALSE
Notice
Layer 3 is not initialized yet.
Router interface number <InterfaceNumber> invalid.
Notice
Router interface number is out of range.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
router interface number <InterfaceNumber> is invalid
Notice
Router interface number is out of range.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Router interface number <InterfaceNumber> is invalid.
636 December/2018
FUJITSU PSWITCH
Notice
Message Collection
Router interface number is out of range.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
rtrIfNum <InterfaceNumber>: Interface state invalid
Notice
Router interface number is out of range.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
rtrIntfNum <InterfaceNumber>: invalid
Notice
Router interface number is out of range.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Unable to create interface <InterfaceNumber> in IP stack.
Notice
Failed to create an interface in IP stack.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Unable to get the interface type for the interface
<InterfaceNumber> (<InterfaceNumber>).
Notice
Could not retrieve interface type.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
2.1.37.
LDAP
LDAP:fail, server not found.
December/2018 637
Message Collection
Informational
LDAP server not found.
FUJITSU PSWITCH
LDAP:fail to authenticate. Username, basedn or password is wrong.
Informational
Authenticatation fail because wrong username, basedn or password.
LDAP:failed to create authentication session,please set ldap server ip address.
Informational
Authenticatation fail because ldap server address not set.
2.1.38.
LINK_DEPENDENCY
Link Dependency failed to register for config apply completion.
Alert
Failed to register a callback function from CLI text config module.
Attempt to set a conflicting Link Action between Groups <ID> and
<ID>.
Informational
An interface cannot participate in two different types of group.
<ID> ID
Attempting to create a Upstream (Dependency) <-> Downstream
(Member) conflict between Groups <ID> and <ID>.
Informational
An interface cannot be both upstream and downstream.
<ID> ID
Tech Support Registration failed for Link Dependency related commands
638 December/2018
FUJITSU PSWITCH
Informational
Message Collection
Failed to register a callback function from Tech Support module.
Error on call to sysapiCfgFileWrite routine on config file
<FileName>
Notice
Failed to save binary configuration file.
<FileName> Log is created by this file.
Failed to send NIM startup phase <NimStartupPhaseNumber> to LLDP thread.
Notice
Failed to create a semaphore.
<NimStartupPhaseNumber> NIM startup phase number
Link Dependency: Failed to register NV routines
Notice
Failed to register a callback function from NV module.
Link Dependency: failed to register to NIM
Notice
Failed to register a callback function from NIM module.
linkDependencyApplyConfigData: failed
Notice
Failed to apply config data.
The link of an interface (<InterfaceNumber>) for group id <ID> goes to <Operation> state.
December/2018 639
Message Collection
Notice
FUJITSU PSWITCH
A link state transition happened in the group.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<ID>
<Operation>
0/1, 0/0/1
ID
Operation, "Add", "Remove", "Up", "Down", "Enable",
"Disable" …
Unable to create link dependency link list.
Notice
Error occurred during initialization of Link dependency.
Unable to create link dependency link list for backup port.
Notice
Error occurred during initialization of Link dependency.
Unable to delete link dependency link listt.
Notice
Error occurred during system reset of Link dependency.
Unable to delete link dependency link list for backup port.
Notice
Error occurred during system reset of Link dependency.
The link of an interface (<InterfaceNumber>) for group id <ID> is shut down due to threshold.
640 December/2018
FUJITSU PSWITCH
Notice
Message Collection
Interface was shut down because the threshold that user configured is reached.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<ID>
0/1, 0/0/1
ID
2.1.39.
LLDP
Failed to send NIM startup phase <NimStartupPhaseNumber> to LLDP thread.
Alert
Failed to send LLDP message.
<NimStartupPhaseNumber> NIM startup phase number
Message send failed during propogate interface to Rx in LLDP task.
Alert
Failed to send LLDP message.
The link of an interface (<InterfaceNumber>) for group id <ID> goes to <Operation> state.
Alert
Failed to send LLDP message.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<ID>
<Operation>
0/1, 0/0/1
ID
Operation, "Add", "Remove", "Up", "Down", "Enable",
"Disable" …
LLDP activate startup done.
Debug
Process activate startup event finished.
LLDP create startup done.
December/2018 641
Message Collection
Debug
Process create startup event finished.
Couldn't add node to the list
Error
Failed to add node to the TLV list.
Couldn't allocate a buffer
Error
Insufficient resources for TLV entries.
FUJITSU PSWITCH
Error accessing LLDP config data for interface <InterfaceNumber> in lldp mapping init.
Error
Configuration interface identifier is mismatch.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to create LLDP PDU for interface <InterfaceNumber>.
Error
Failed to create LLDP PDU.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to fill ethernet header in LLDP PDU for interface
<InterfaceNumber>.
Error
Unable to retrieve source, and destination MAC addresses.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to get TLV buffer
642 December/2018
FUJITSU PSWITCH
Error
Insufficient resources for LLDP TLV.
Message Collection
Failed to get TLV buffer on interface <InterfaceNumber>.
Error
Insufficient resources for LLDP TLV.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to register the LLDP component due to lack of resources.
Error
Insufficient resources for registering component.
Failed to write 8023 TLV header, type <TlvHandleValue>, subtype
<TypeValue>, length <SizeValue>
Error
No enough buffer for this TLV.
<TlvHandleValue> Type value for tlv block handle
<TypeValue>
<SizeValue>
Type Value
An integer for a specific range or a limit value.
Failed to write DCBX TLV(s)
Error
Invalid TLV length, or no enough buffer for this TLV.
Failed to write Med TLV header, type <TlvHandleValue>, subtype
<TypeValue>, length <SizeValue>
Error
No enough buffer for this TLV.
<TlvHandleValue> Type value for tlv block handle
<TypeValue>
<SizeValue>
Type Value
An integer for a specific range or a limit value.
Failed to write QCN TLV.
December/2018 643
Message Collection
Error
FUJITSU PSWITCH
Parameters are not provided, or invalid TLV length, or no enough buffer for this
TLV.
Failure to get interface index while applying LLDP Rx mode on interface <InterfaceNumber>.
Error
Failure to get LLDP interface index.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failure to get interface index while applying LLDP Tx mode on interface <InterfaceNumber>.
Error
Failure to get LLDP interface index.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Incorrect length of 8023 TLV, type <TlvHandleValue>, subtype
<TypeValue>, length <SizeValue>
Error
Invalid TLV length.
<TlvHandleValue>
<TypeValue>
<SizeValue>
Type value for tlv block handle
Type Value
An integer for a specific range or a limit value.
Incorrect length of Med TLV, type <TlvHandleValue>, subtype
<TypeValue>, length <SizeValue>
Error
Invalid TLV length.
<TlvHandleValue>
<TypeValue>
<SizeValue>
Type value for tlv block handle
Type Value
An integer for a specific range or a limit value.
Invalid parameters are provided
644 December/2018
FUJITSU PSWITCH
Error
Message Collection
Parameters are not provided in the procedure of getting TLV information.
Lldp queue has not been created!
Error
Lldp queue has not been created.
LLDP registrar ID <ComponentID> already exists.
Error
Component already registered.
<ComponentID> Component ID
LLDP remote table change update failed to send change notification.
Error
Failed to send notification message.
LLDPDU transmit failed on interface <InterfaceNumber> !
Error
Failure to transmit LLDPDU.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
LLDPDU transmit Failed!. Unable to reserve network buffer for transmission.
Error
Failure to transmit LLDPDU.
Message send failed due to message queue full.
Error
Insufficient resources for LLDP queue.
There is no room for 8023 TLV, type <TlvHandleValue>, length
<SizeValue>
December/2018 645
Message Collection
Error
FUJITSU PSWITCH
No enough buffer for this TLV.
<TlvHandleValue> Type value for tlv block handle
<SizeValue> An integer for a specific range or a limit value.
There is no room for Med TLV, type <TlvHandleValue>, length
<SizeValue>
Error
No enough buffer for this TLV.
<TlvHandleValue> Type value for tlv block handle
<SizeValue> An integer for a specific range or a limit value.
Timer send failed for LLDP component.
Error
Insufficient resources for LLDP queue.
Failed to write CDCP TLV.
Error
Invalid TLV length, or not enough buffer for this TLV.
Failed to write EVB TLV.
Error
Invalid TLV length, or not enough buffer for this TLV.
Failed to get index for interface <InterfaceNumber> during LLDP interface change callback.
Informational
Failure to get LLDP interface index.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
LLDP queue has not been created!
646 December/2018
FUJITSU PSWITCH
Informational
Message Collection
Lldp queue has not been created. Failed to send LLDP timer tick event.
LLDPDU transmit failed!
Informational
Failure to transmit LLDPDU.
Received an interface change callback while LLDP not ready to receive it.
Informational
LLDP is not ready.
Tech Support Registration failed for LLDP related commands);
Informational
Unable to register with tech support.
Received an EVB notification callback while LLDP not ready to receive it.
Informational
LLDP is not ready.
Unable to register for EVB notification callback.
Informational
Unable to register with EVB for notification callback.
<FunctionName>: Error allocating buffers
Notice
Insufficient resources for creating LLDP remote DB.
<FunctionName> Log is created by this function.
<FunctionName>: Error allocating data for lldp remote DB Tree
December/2018 647
Message Collection
Notice
Insufficient resources for creating LLDP remote DB.
<FunctionName> Log is created by this function.
FUJITSU PSWITCH
<FunctionName>: Failed to add the node to the remote node list
Notice
Insufficient resources for adding LLDP remote entry.
<FunctionName> Log is created by this function.
<FunctionName>: Failed to lldp remote index linked list
Notice
Insufficient resources for creating LLDP remote DB.
<FunctionName> Log is created by this function.
<FunctionName>:<FileLineNumber> Error Adding the node to the
Remote Tree for intf <InterfaceNumber>
Notice
Failed to add remote data entry.
<FunctionName> Log is created by this function.
<FileLineNumber> Log is created by this line.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<FunctionName>:<FileLineNumber> Error allocating the node to the remote index for intf <InterfaceNumber>
Notice
<FunctionName>
<FileLineNumber>
Log is created by this function.
Log is created by this line.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<FunctionName>:<FileLineNumber> Error Retrieving the node from the Remote Tree for intf <InterfaceNumber>
648 December/2018
FUJITSU PSWITCH
Notice
Message Collection
Failed to retrieve remote data entry.
<FunctionName> Log is created by this function.
<FileLineNumber> Log is created by this line.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
802.1AB: Failed to register with NIM
Notice
Unable to register with NIM for interface callback functions.
Could not create LLDP task.
Notice
Failed to create LLDP task.
Invalid key length in lldpRemDbEntryCompare
Notice
The length of compared entry is invalid.
Invalid message type:<TypeValue>. Unsupported LLDP packet received.
Notice
Unsupported LLDP message received.
<TypeValue> Type Value
LLDP registrar ID <ComponentID> greater than last component ID.
Notice
Invalid component ID.
<ComponentID> Component ID
lldpApiCnfgrCommand(): message send failed
December/2018 649
Message Collection
Notice
Failed to send LLDP message.
lldpInit: msgQueue creation error.
Notice
Failed to create LLDP message queue.
lldpInit(): message send failed
Notice
Failed to send LLDP message.
FUJITSU PSWITCH
lldpSave: Error on call to sysapiCfgFileWrite file <FileName>
Notice
Failed to write LLDP configuration file.
<FileName> Log is created by this file.
Unable to initialize LLDP task.
Notice
Failed to start LLDP task.
Multiple DCBX peers are detected on interface <InterfaceNumber>.
Warning
Multiple DCBX peers are detected.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
2.1.40.
LOG
logServerLogPersistentClear: Cannot remove operational log file
Debug
remove operational log file failed
logServerLogPersistentClear: Cannot remove startup log file
650 December/2018
FUJITSU PSWITCH
Debug
remove startup log file failed
logShuffleFiles: Cannot remove file
Debug
remove file failed
logShuffleIndexFiles: Cannot remove file
Debug
remove file failed
Message Collection
The system is restarting due to inconsistent state
Emergency
Write a log into the regular log indicating the system is restarting due to inconsistent state
logWriteInMemoryLogToFile: osapiFsCreateFile failed
Informational
Create file failed
logWriteInMemoryLogToFile: osapiFsOpen failed
Informational
Open file failed
Could not fill SSH session information
Notice
Maybe the request exceed the MAX_SSH_LOGINS
LOG - Message test start message test end
Notice
Add a message to the log
LOG number <Index> - Message test start message test end
December/2018 651
Message Collection
Notice
Add messages to the log
<Index> Index
FUJITSU PSWITCH
Log_Init: Cannot malloc enough memory to create log
Notice
Cannot malloc enough memory to create log
Log_Init: Re-initializing logs, old size <SizeValue>, new size
<SizeValue>
Notice
Re-initializing logs
<SizeValue> An integer for a specific range or a limit value.
logWriteInMemoryLogToFile: osapiFsDeleteFile failed
Notice
Delete file failed
HANDLE LIST : Component (<ComponentID>, <ComponentName>) returned invalid memory
Notice
Component returned invalid memory
<ComponentID> Component ID
<ComponentName> Component name
HANDLE LIST : Failed to allocate handle list memory for Component=
<ComponentID>, <ComponentName>
Notice
Failed to allocate handle list memory for Component
<ComponentID> Component ID
<ComponentName> Component name
HANDLE LIST : Null handle list for Component= <ComponentID>,
<ComponentName>
652 December/2018
FUJITSU PSWITCH
Notice
Handler list for component is null
<ComponentID> Component ID
<ComponentName> Component name
2.1.41.
LOOP_PROTECT
Message Collection
<FunctionName>: Unknown NIM startup event <ID>.
Error
Received unknown NIM startup event in Loop Protect task
<FunctionName> Log is created by this function.
<ID> ID
Error accessing loopProtect config data for interface
<InterfaceNumber>.
Error
Failed to get Loop Protect config data on specific interface
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failure taking loopProtect message queue semaphore.
Error
Failed to take semaphore for Loop Protect message queue
Unrecognized event <ID>.
Error
Received unrecognized event in Loop Protect task
<ID> ID
<FunctionName>: Rcvd unknown NIM intf state <State> for intf
<InterfaceNumber>.
December/2018 653
Message Collection
Informational
FUJITSU PSWITCH
Received unknown NIM startup event on specific interface for Loop Protection
<FunctionName> Log is created by this function.
<State> State
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Can't get config id for interface <InterfaceNumber>.
Informational
Unable to get NIM interface config id for Loop Protection
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Can't map interface <InterfaceNumber>.
Informational
Failed to get Loop Protect config data on specific interface
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Interface <InterfaceNumber> is not valid.
Informational
Failed to get specific NIM interface type for Loop Portect process
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Loop Protection isn't ready.
Informational
Unable to get valid Loop Protect map interface config because phase init is not finished
loopProtectIntfChangeCallback is not ready.
654 December/2018
FUJITSU PSWITCH
Informational
Message Collection
Unable to register to NIM interface changes callback during Loop Protect phase 2 init
loopProtectIntfConfigEntryGet failed for interface
<InterfaceNumber>.
Informational
Failed to get Loop Protect config data on specific interface
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Received an interface callback while outside the EXECUTE state.
Informational
Unable to receive NIM interface changes callback because phase init is not finished
Wrong interface <InterfaceNumber>.
Informational
Unable to get valid interface to configure Loop Protect
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Wrong intIfNum <InterfaceNumber>.
Informational
Failed to get valid Loop Protect map interface
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<FunctionName>: Failed to create intf <InterfaceNumber>.
December/2018 655
Message Collection
Notice
FUJITSU PSWITCH
Failed to create NIM interaface startup callback for Loop Protect
<FunctionName> Log is created by this function.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<FunctionName>: Failed to send NIM startup
<NimStartupPhaseNumber> msg to LOOP_PROTECT msg queue.
Notice
Failed to send NIM startup message to Loop Protect queue
<FunctionName> Log is created by this function.
<NimStartupPhaseNumber> NIM startup phase number
<FunctionName>: Rcvd NIM startup <NimStartupPhaseNumber> callback in LOOP_PROTECT init state <State>.
Notice
Received NIM startup callback while Loop Protect is in init state
<FunctionName> Log is created by this function.
<NimStartupPhaseNumber> NIM startup phase number
<State> State
<FunctionName>: Rcvd NIM startup <NimStartupPhaseNumber> callback when LOOP_PROTECT msg queue not created.
Notice
Received NIM startup callback while Loop Protect messsage queue is not created
<FunctionName> Log is created by this function.
<NimStartupPhaseNumber> NIM startup phase number
Could not get a buffer for <InterfaceNumber> interface.
Notice
Unable to allocate Loop Protect packet buffer for sending
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Error on call to sysapiCfgFileWrite routine on config file
<FileName>.
656 December/2018
FUJITSU PSWITCH
Notice
Unable to save Loop Protect config data to system config file
<FileName> Log is created by this file.
Message Collection
Error transmitting packet on <InterfaceNumber> interface.
Notice
Failed to send Loop Protect packet on specific interface
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to give msgQueue semaphore on <InterfaceNumber> interface.
Notice
Failed to give semaphore for Loop Protect message queue on specific interface
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to give msgQueue semaphore.
Notice
Failed to give semaphore for Loop Protect message queue
Foreign pdu on interface <InterfaceNumber>.
Notice
Reiceived packet which destination mac address or ether type is not for Loop
Protection
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Loop detected on port <InterfaceNumber>, <InterfaceNumber> and shuts down port <InterfaceNumber>.
December/2018 657
Message Collection
Notice
FUJITSU PSWITCH
Loop is detected on one or several ports and one or several ports would be blocked by rule
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
loopProtect message recv failed: event <ID>, intIfNum
<InterfaceNumber>.
Notice
Failed to receive Loop Protect queue message on specific interface
<ID> ID
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
loopProtect task creation error.
Notice
Unable to create Loop Protect main task during system init
loopProtectPduQueue creation error.
Notice
Unable to create Loop Protect frame process queue during system init
loopProtectProcessQueue creation error.
Notice
Unable to create Loop Protect message process queue during system init
osapiMessageSend failed on <InterfaceNumber> interface.
Notice
Failed to send Loop Protect queue message on specific interface
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
osapiMessageSend failed.
658 December/2018
FUJITSU PSWITCH
Notice
Failed to send message to Loop Protect process queue
Message Collection
Port <InterfaceNumber> is auto recovered by Loop Protection.
Notice
A port blocked by Loop Protection is recovered to normal status after a period of time
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Unable to create loopProtect semaphore().
Notice
Unable to create Loop Protect semaphore for data protection during system init
Unable to initialize loopProtect_task().
Notice
Unable to init Loop Protect main task during system init
Unable to register for NIM Interface change callback.
Notice
Unable to register to NIM interface changes callback during Loop Protect phase 2 init
Data Length(<LengthValue>) greater than LOOP PROTECT PDU SIZE
<MaxValue>.
Warning
Received incorrect size of Loop Protect packet and would be dropped
<LengthValue> ipv6 prefix length
<MaxValue> Maximum value
2.1.42.
MCAST
Failed to register with checkpoint callback for backup unit.
December/2018 659
Message Collection
Alert
FUJITSU PSWITCH
The program register the callback function for backup unit has some problem.
Failed to register with checkpoint callback for management unit.
Alert
The program register the callback function for management unit has some problem.
IP Multicast failed to register for checkpoint service callbacks.
Alert
Multicast fail to register the service callback function.
Could not add entry.
Error
Some error happen when software want to insert the entry to database.
Failed to create async event correlator.
Error
Create the async event corrrelator has error.
Invalid checkpoint callback type <TypeValue>
Error
This callback type is Invalid.
<TypeValue> Type Value
Invalid checkpoint type <TypeValue>.
Error
The packet type is unknown type to packet process function.
<TypeValue> Type Value
Unexpected checkpoint service callback type <TypeValue>.
660 December/2018
FUJITSU PSWITCH
Error
Message Collection
The packet type is unknown type to packet backup callback function.
<TypeValue> Type Value
Invalid Address Family.
Informational
The socket address family is incorrect.
Invalid familyType <FamilyType>.
Informational
Router port admin setting has family type error.
<FamilyType> type indicate ipv4 or ipv6(ex. L7_AF_INET, L7_AF_INET6,...) or generic family type
Invalid familyType, family = <FamilyType>.
Informational
Local multicast address updating has family type error.
<FamilyType> type indicate ipv4 or ipv6(ex. L7_AF_INET, L7_AF_INET6,...) or generic family type
MGMD all routers address <IPAddress> add to the DTL multicast list failed MGMD all routers address addition to the local multicast list failed. As a result of this, MGMD multicast packets with this address will not be received at the application.
Notice
When add the all router address to DTL multicast list has some error.
<IPAddress> ip_address, or, ipv6_address, or hostname
MGMD all routers address <IPAddress> delete from the DTL multicast list failed MGMD all routers address deletion from the local multicast list failed. As a result of this, MGMD multicast packets are still received at the application though MGMD is disabled.
December/2018 661
Message Collection
Notice
FUJITSU PSWITCH
When delete the all router address to DTL multicast list has some error.
<IPAddress> ip_address, or, ipv6_address, or hostname
Multicast IPv4 control packet send failed for interface
<InterfaceNumber> on DestIP: <IPAddress>, sockFD: <SocketFD>,
Length: <SizeValue>, Flags: <PacketFlag>. IPv4 multicast control packet transmission failed. This is because of the socket sendto() failure. This message can be seen when a load of control packets are sent at once and it results in the non-availability of socket buffers.
Notice
The Multicast ipv4 packet send fail.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<IPAddress>
<SocketFD>
<SizeValue>
<PacketFlag>
0/1, 0/0/1 ip_address, or, ipv6_address, or hostname
File descriptor for socket
An integer for a specific range or a limit value.
Packet flag
Multicast IPv6 control packet send failed for interface
<InterfaceNumber> on DestIP: <IPAddress>, sockFD: <SocketFD>,
Length: <SizeValue>, Flags: <PacketFlag>. IPv6 multicast control packet transmission failed. This is because of the socket sendto() failure. This message can be seen when a load of control packets are sent at once and it results in the non-availability of socket buffers.
Notice
The Multicast ipv6 packet send fail.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<IPAddress>
<SocketFD>
<SizeValue>
<PacketFlag> ip_address, or, ipv6_address, or hostname
File descriptor for socket
An integer for a specific range or a limit value.
Packet flag
Checkpoint message expected length exceeds buffer length.
662 December/2018
FUJITSU PSWITCH
Warning
The input packet data length is over the limit.
Message Collection
Unknown checkpoint message type received (<TypeValue>)
Warning
The input packet type is known type.
<TypeValue> Type Value
2.1.43.
MFDB
Snooping component failed to register for MFDB entry changes.
Alert
IGMP/MLD snooping module initialization, but register a routine to call MFDB entry has errror.
Bad rc <ErrorCode> in mfdbUserComponentsNotify for component
<ComponentID>, <MfdbProtocolName>
Informational
To notify all the MFDB user components has error.
<ErrorCode> Error code
<ComponentID> Component ID
<MfdbProtocolName> "STATIC", "GMRP", "IGMP", "MLD", "MVR", "MMRP", "MSRP",
"Unknown"
could not delete avl semaphore.
Informational
Delete the mfdb semaphore fail.
entry does not exist.
Informational
Delete the entry from MFDB but the entry is not exsit
entry does not exist. Trying to update a non existing entry.
December/2018 663
Message Collection
Informational
Update the entry from MFDB but the entry is not exsit
FUJITSU PSWITCH
MFDB: component ID <ComponentID> greater than
L7_LAST_COMPONENT_ID.
Informational
MFDB be register a routine to be called by other component but this component
ID is invaild.
<ComponentID> Component ID
mfdbDtlAdd: dtlL2McastEntryAdd failed.
Informational
Add the entry to the DTL multicast table has problem
2.1.44.
MLAG
Error! Sending message for configurator to mlag_queue failed
Alert
Send VPC configuration event to queue failed
Failed to create VPC bulk transmit tasks
Alert
Create VPC bulk transmit task failed
Failed to create VPC checkpointing task
Alert
Create VPC checkpoint task failed
Failed to create VPC packet transmission task
Alert
Create VPC packet transmission task failed
Failed to create VPC tasks
664 December/2018
FUJITSU PSWITCH
Alert
Create VPC task failed
Message Collection
Failed to initialize DCPDP due to DCPDP task initialization failure
Alert
Initialization DCPDP task failed
Failed to send peer timeout event to DCPDP task for processing
Alert
Send peer timeout event to DCPDP queue failed
Failed to send Transmit Timer timeout event to DCPDP task for processing
Alert
Send transmission timerout event to DCPDP queue failed
Failure enabling DCPDP protocol due to DCPDP receive task initialization failure
Alert
Failure enabling DCPDP protocol due to DCPDP receive task initialization failure
Peer Control Plane no longer detected
Alert
No received peer DCPDP packet during received timeout
Unable to create DCPDP task semaphore
Alert
Create DCPDP task semaphore failed
Unable to create peer-link block mask semaphore
December/2018 665
Message Collection
Alert
Create VPC peer-link block mask semaphore failed
FUJITSU PSWITCH
Unable to create VPC bulk data sync pending semaphore
Alert
Create VPC bulk data sync pending semaphore failed
Unable to create VPC checkpointing pending semaphore
Alert
Create VPC checkpoint pending semaphore failed
Unable to create VPC KeepAlive operational data semaphore
Alert
Create VPC keep-alive operational data semaphore failed
Unable to create VPC Peer Info data semaphore
Alert
Create VPC peer information data semaphore failed
Unable to create VPC task semaphore
Alert
Create VPC task semaphore failed
Unable to initialize FDB VPC age task
Alert
Initialization FDB VPC age task failed
Unable to initialize FDB VPC task
Alert
Initialization FDB VPC task failed
Unable to initialize VPC bulk transmission task
666 December/2018
FUJITSU PSWITCH
Alert
Initialization VPC bulk transmit task failed
Message Collection
Unable to initialize VPC checkpoint task
Alert
Initialization VPC checkpoint task failed
Unable to initialize VPC packet transmission task
Alert
Initialize VPC packet transmission task failed
Unable to initialize VPC Peer Link communication
Alert
Initialize VPC peer-link component failed
Unable to initialize VPC task
Alert
Initialization VPC task failed
VPC: failed to register for PDUs
Alert
Register VPC PDU received callback function failed
VPC: Failed to register NV routines
Alert
Register VPC notify callback function failed
VPC: failed to register to NIM
Alert
Register VPC NIM interface change callback function failed
<Operation> port member <InterfaceNumber> <Operation> Peer Link
Egress Policy
December/2018 667
Message Collection
Debug
FUJITSU PSWITCH
Update VPC peer-link member port egress policy
<Operation> Operation, "Add", "Remove", "Up", "Down", "Enable",
"Disable" …
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<Operation> traffic from peer-link to Interface <InterfaceNumber>.
<Operation> <CountValue> members from egress policy
Debug
Update VPC peer-link interface egress policy
<Operation> Operation, "Add", "Remove", "Up", "Down", "Enable",
"Disable" …
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<CountValue>
0/1, 0/0/1
Count Value
Destination interface <InterfaceNumber> down. Skip moving rest of the FDB entries from <InterfaceNumber> to <InterfaceNumber>
Debug
Destination interface is down. Skip moving rest of the FDB entries
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
ERROR: Cannot get the VPC ID of the port-channel <InterfaceNumber>
Debug
Getting VPC ID of the LAG failed
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
ERROR: IP address <IPAddress> does not exist, failed to bind the
UDP socket for peer detection
Debug
Binding DCPDP socket failed when IP address does not exist
<IPAddress> ip_address, or, ipv6_address, or hostname
Failed to read DCPDP Packet from peer
668 December/2018
FUJITSU PSWITCH
Debug
Received DCPDP packet from peer failed
Message Collection
Failed to transmit DCPDP Packet
Debug
Send DCPDP packet failed
Handle <Operation> event of interface <InterfaceNumber>
Debug
Handle VPC interface status change
<Operation> Operation, "Add", "Remove", "Up", "Down", "Enable",
"Disable" …
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Ignoring invalid event type <EventID>
Debug
Handle VPC self link state event type error
<EventID> Event ID
Ignoring invalid event type <EventID> from peer
Debug
Received invalid event type control message from peer
<EventID> Event ID
Invalid VPC Phase for handling interface <InterfaceNumber> DOWN
Debug
Invalid VPC Phase for handling interface DOWN
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Invalid VPC Phase for handling interface <InterfaceNumber> UP
December/2018 669
Message Collection
Debug
FUJITSU PSWITCH
Invalid VPC Phase for handling interface UP
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Received control message of type <MlagEventType>, for VPC ID <ID>
Debug
Received control message from peer
<MlagEventType> "MLAG_INTERFACE_UP", "MLAG_INTERFACE_DOWN"
<ID> ID
VPC <InterfaceNumber>(VPC ID: <ID>) <Operation> on self. Inform peer to program peer-link to <Operation> traffic
Debug
Inform VPC peer to program peer-link traffic by self VPC interface status
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<ID>
<Operation>
ID
Operation, "Add", "Remove", "Up", "Down", "Enable",
"Disable" …
<ComponentID> application's peer failed to acknowledge reception of message of size <SizeValue> bytes(TxID: <ID>) time elapsed
<TimeValue> millisec (Application wait time is <TimeValue>)
Error
Received VPC peer invalid acknowledge message when exceed wait time
<ComponentID> Component ID
<SizeValue> An integer for a specific range or a limit value.
<ID>
<TimeValue>
ID
Time Value
<FunctionName>: Error allocating buffers for FDB VPC Peer Control
Msgs
670 December/2018
FUJITSU PSWITCH
Error
FDB VPC peer control message buffer memory allocate failed
<FunctionName> Log is created by this function.
Message Collection
<FunctionName>: Error allocating buffers for VPC Async Peer
Control Msgs
Error
VPC peer-link async control message buffer memory allocate failed
<FunctionName> Log is created by this function.
<FunctionName>: Error allocating buffers for VPC Peer Control Msgs
Error
VPC peer-link control message buffer memory allocate failed
<FunctionName> Log is created by this function.
<FunctionName>: Error allocating buffers for VPC Peer Data Msgs
Error
VPC peer-link data message buffer memory allocate failed
<FunctionName> Log is created by this function.
Cannot clear the peer link statistics
Error
Clear VPC peer-link statistic failed
Cannot configure the DCPDP mode
Error
Send configure DCPDP mode event to VPC task failed
Cannot configure the DCPDP parameters
Error
Send configure DCPDP parameters event to VPC task failed
Cannot configure the keepalive mode
December/2018 671
Message Collection
Error
Setting VPC keep-alive mode failed
FUJITSU PSWITCH
Cannot configure the VPC mode
Error
Send configure VPC mode event to VPC task failed
Cannot queue the bulk sync time out event for mlag_bulk_ctrl_queue
Error
Send VPC bulk sync timeout event to bulk control message queue failed
Cannot send message to VPC Queue rc(<ErrorCode>)
Error
Send VPC NIM interface startup callback event failed
<ErrorCode> Error code
Cannot un-configure the peer link
Error
Send configure as VPC peer-link event to VPC task failed
Delivered application's <ComponentID> control message with TxID
<ID> and size <SizeValue> bytes to peer but failed to store the message for subsequent processing. If the receiving application on the peer does not acknowledge the message
Error
Delivered application's control message with TxID to peer but failed to store the message for subsequent processing.
<ComponentID> Component ID
<ID>
<SizeValue>
ID
An integer for a specific range or a limit value.
Error handling interface DOWN event for lag <InterfaceNumber>.
Reason: Failed to get member list
672 December/2018
FUJITSU PSWITCH
Error
Message Collection
Getting VPC interface member list failed when VPC interface down
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Error handling interface UP event for lag <InterfaceNumber>.
Reason: Failed to get member list
Error
Getting VPC interface member list failed when VPC interface up
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
ERROR: Cannot configure interface <InterfaceNumber> as peer-link
Error
Configure LAG interface as peer-link failed
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
ERROR: Cannot Enable Egress policy on Peer-Link
Error
Enabled egress policy on peer-link failed
ERROR: Failed to <Operation> the DCPDP Protocol. Reason: Failure sending message to DCPDP task
Error
Send configure DCPDP mode event to queue failed
<Operation> Operation, "Add", "Remove", "Up", "Down", "Enable",
"Disable" …
ERROR: Failed to create the UDP socket for DCPDP
Error
Create DCPDP socket failed
ERROR: Failed to initialize the block mask to be set on the
Peer-Link <InterfaceNumber>
December/2018 673
Message Collection
Error
FUJITSU PSWITCH
Initialize VPC egress policy on the peer-link failed
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
ERROR: Failed to move FDBs for VPC <InterfaceNumber> <FromTo> peer-link
Error
Failed to move FDBs to handle MLAG members status change
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<FromTo>
0/1, 0/0/1
"From" or "To"
ERROR: Failed to transmit Control message to peer to handle MLAG members status change
Error
Failed to transmit Control message to peer to handle MLAG members status change
ERROR: Failure updating Egress Policy on Peer-Link for member port
<InterfaceNumber>
Error
Updated egress policy on peer-link member port failed
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to create VPC Control Message linked list for regID <ID>
Error
Create VPC control message link list failed
<ID> ID
Failed to delivered Application's <ComponentID> control message with TxID <ID> and size <SizeValue> bytes to peer
674 December/2018
FUJITSU PSWITCH
Error
Message Collection
Failed to delivered application's control message to peer
<ComponentID> Component ID
<ID>
<SizeValue>
ID
An integer for a specific range or a limit value.
Failed to delivered Application's <ComponentID> control message with TxID <ID> and size <SizeValue> bytes to peer as the peer-link is down
Error
Failed to delivered application's control message to peer as the peer-link is down
<ComponentID> Component ID
<ID>
<SizeValue>
ID
An integer for a specific range or a limit value.
Failed to get VPC interface for VPC ID <ID>
Error
Failed to get VPC interface information for VPC ID
<ID> ID
Failed to send <MlagEventType> event for vpc <ID>
Error
Send VPC event to queue failed.
<MlagEventType> "MLAG_INTERFACE_UP", "MLAG_INTERFACE_DOWN"
<ID> ID
Failure sending message to configure DCPDP for processing
Error
Send configure DCPDP parameters event to queue failed
Failure transmitting event VPC_INTERFACE_DOWN to peer for interface <InterfaceNumber>
December/2018 675
Message Collection
Error
FUJITSU PSWITCH
Send VPC interface down event to peer failed
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failure transmitting event VPC_INTERFACE_UP to peer for interface
<InterfaceNumber>. Hence shutting down all of it's local members
Error
Send VPC interface up event to peer failed. Hence shutting down all of it's local members
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Ignore Port Channel DOWN request on non VPC interface
<InterfaceNumber>
Error
Ignore Port Channel DOWN request on non VPC interface
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Ignore Port Channel UP request on non VPC interface
<InterfaceNumber>
Error
Ignore Port Channel UP request on non VPC interface
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Invalid Destination IP address. IP address should be valid unicast address
Error
Setting DCPDP destination IP address failed
Invalid Source IP address. IP address should be valid unicast address
676 December/2018
FUJITSU PSWITCH
Error
Setting DCPDP source IP address failed
Message Collection
No control buffers available to store application <ComponentID> msg with txID <ID>. This will mean that if there is a failure in processing this message at the peer, the error will not be reported back to <ApplicationID> component and it cannot taske action to handle the error
Error
VPC transmission peer control message buffer memory allocate failed
<ComponentID> Component ID
<ID> ID
<ApplicationID> "L7_MLAG_APPL_ID_(MLAG/DOT3AD/DOT1S/FDB/TEST)"
Received ACK for <ComponentID> application's message with transaction-ID <ID>. But could not find the corresponding message.
This might be because the ACK reception took more time than expected and a failure callback might have been invoked for the message with this transaction-ID
Error
Received ACK for application's message with transaction-ID. But could not find the corresponding message. This might be because the ACK reception took more time than expected and a failure callback might have been invoked for the message with this transaction-ID
<ComponentID> Component ID
<ID> ID
Trying to trasnmit a packet in <State>(<State>) state
Error
Trying to trasnmit a packet in wrong state
<State> State
Unable to post async pdu retransmit timer event to mlag transmit task
December/2018 677
Message Collection
Error
FUJITSU PSWITCH
Send VPC PDU re-transmission timer event to VPC transmit task failed
VPC cannot process event <EventID> for interface
<InterfaceNumber>
Error
Send VPC NIM interface change callback event failed
<EventID> Event ID
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
VPC cannot queue the check point ready event
Error
Send VPC checkporint ready event to queue failed
DCPDP protocol not started as DCPDP destination IP address is not configured
Informational
DCPDP protocol not started as DCPDP destination IP address is not configured
DCPDP protocol not started as DCPDP source IP address is not configured
Informational
DCPDP protocol not started as DCPDP source IP address is not configured
DCPDP: Unable to create message queue for dcpdp_task
Informational
Create DCPDP task message queue failed
Duplicate control message received for application <ComponentID>, length <SizeValue>, TxID <ID>. Ignoring the message
678 December/2018
FUJITSU PSWITCH
Informational
Message Collection
Duplicate control message received for application
<ComponentID> Component ID
<SizeValue>
<ID>
An integer for a specific range or a limit value.
ID
Enabling DCPDP Protocol
Informational
Enabled DCPDP protocol
Failed to get a control buffer for the application <ComponentID>
Informational
VPC control message buffer memory allocate failed
<ComponentID> Component ID
FDB VPC: Unable to create message queue for FDB VPC Age task
Informational
Create FDB VPC age task message queue failed
FDB_MLAG: Unable to create message queue for fdb_mlag_task
Informational
Create FDB VPC task message queue failed
Interface <InterfaceNumber> is not valid
Informational
This interface is invalid for VPC
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Peer detected through dual control plane protocol
Informational
Received DCPDP packet from peer
Peer device role is changed to None
December/2018 679
Message Collection
Informational
Peer device VPC role is change to none
Peer device role is changed to primary
Informational
Peer device VPC role is change to primary
Peer device role is changed to secondary
Informational
Peer device VPC role is change to secondary
Set VPC Operational Mode to <State>
Informational
Setting VPC operational mode to Enabled / Disabled
<State> State
FUJITSU PSWITCH
This device role is changed from secondary to primary
Informational
This device VPC role is changed from secondary to primary
This device role is changed to None
Informational
Self device VPC role is change to none
This device role is changed to primary
Informational
Self device VPC role is change to primary
This device role is changed to secondary
Informational
Self device VPC role is change to secondary
VPC: Unable to create message queue for bulk VPC control messages
680 December/2018
FUJITSU PSWITCH
Informational
Create VPC bulk control message queue failed
Message Collection
VPC: Unable to create message queue for VPC checkpointing control messages
Informational
Create VPC checkpoint control message queue failed
VPC: Unable to create message queue for VPC control messages
Informational
Create VPC control message queue failed
VPC: Unable to create message queue for VPC task
Informational
Create VPC task message queue failed
Could not get a buffer for <InterfaceNumber>(<InterfaceNumber>) interface
Notice
Input transmission function parameter error
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Could not process the data message received from peer
Notice
Send peer data message to queue failed
Failed to handle active event for interface <InterfaceNumber>
Notice
Failed to handle active event for interface
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to handle inactive event for interface <InterfaceNumber>
December/2018 681
Message Collection
Notice
FUJITSU PSWITCH
Failed to handle inactive event for interface
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to process Bulk Control Message from the peer
Notice
Send peer bulk control message to VPC bulk control message queue failed
Failed to process Checkpoint message from Peer
Notice
Send peer checkpoint message to queue failed
FDB: Unable to allocate resources
Notice
FDB VPC database memory allocate failed
Foreign pdu on interface <InterfaceNumber>(<InterfaceNumber>)
Notice
Received invalid VPC PDU packet
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Notifying the VPC role change (<MlagRole>) failed
Notice
Notifying the VPC role change failed
<MlagRole> Primary or secondary
osapiMessageSend failed <TimeValue>
682 December/2018
FUJITSU PSWITCH
Notice
Send VPC keep-alive timer event to queue failed
<TimeValue> Time Value
Message Collection
osapiMessageSend failed on <InterfaceNumber>(<InterfaceNumber>) interface
Notice
Send VPC keep-alive PDU event to queue failed
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Primary VPC peer no longer detected through Keepalive protocol
Notice
Primary VPC peer no received keep-alive packet
Secondary VPC peer no longer detected through Keepalive protocol
Notice
Secondary VPC peer no received keep-alive packet
VPC peer role get failed
Notice
Failed to getting VPC peer role from database
VPC self role get failed
Notice
Failed to getting VPC self role from database
Data Length(<SizeValue>-<SizeValue>) greater than VPC packet SIZE
<SizeValue>
Warning
VPC packet data length greater than VPC packet size
<SizeValue> An integer for a specific range or a limit value.
ERROR: <InterfaceNumber> not configured as Peer Link
December/2018 683
Message Collection
Warning
FUJITSU PSWITCH
Interface is not configured as Peer Link
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
ERROR: Port channel <InterfaceNumber> is already configured as peer link
Warning
LAG can not configured as peer-link when LAG already configured as peer-link
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to get a data buffer for the application <ComponentID>
Warning
VPC data message buffer memory allocate failed
<ComponentID> Component ID
failed to send ACK for transactionID <ID>
Warning
Send ACK control message to peer failed
<ID> ID
Failure in setting VPC MAC address as the specified MAC address is equal to the local system MAC address
Warning
VPC MAC address can not configured when MAC address is local system MAC address
Failure in setting VPC MAC address as the specified MAC address is equal to the peer's system MAC address
Warning
VPC MAC address can not configured when MAC address is peer's system MAC address
Failure in setting VPC MAC address as the specified MAC address is not unicast MAC address
684 December/2018
FUJITSU PSWITCH
Warning
Message Collection
VPC MAC address can not configured when MAC address is not specific unicast MAC address
Failure retrieving mlag operational mode. Hence could not configure keep-alive mode
Warning
VPC can not setting keep-alive mode when getting VPC operational mode failed
Interface <InterfaceNumber> cannot be set as Peer-Link. Only LAG interface can be set as Peer-Link
Warning
Interface can not configured as peer-link when interface is not LAG interface
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
LAG <InterfaceNumber> configured as VPC. Cannot set as Peer-Link
Warning
LAG can not configured as peer-link when LAG configured as VPC
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
The configured DCPDP packet reception timeout should be greater than three times the configured DCPDP packet transmission interval(<TimeValue> millisec)
Warning
DCPDP packet reception timeout should be greater thean three times the DCPDP packet transmission interval
<TimeValue> Time Value
The configured DCPDP packet reception timeout should be lesser than the configure/default keepalive timeout(<TimeValue> millisec)
December/2018 685
Message Collection
Warning
FUJITSU PSWITCH
DCPDP packet reception timeout should be lesser than configure keep-alive timeout
<TimeValue> Time Value
Unable to process received ACK for <ComponentID> application's
Async message with transaction-ID <ID>
Warning
Sending received VPC ACK control message event to queue failed
<ComponentID> Component ID
<ID> ID
VPC domainId(<ID>) in the received keep-alive message is not equal to the configured VPC domainId(<ID>). Hence ignoring the received keep-alive message
Warning
Received keep-alive message is not equal to the configured VPC domainId
<ID> ID
VPC is operational. Cannot un-configure peer-link
Warning
VPC is operational. Cannot un-configure peer-link
VPC MAC address(<MacAddress>) in the received keep-alive message is not equal to the configured VPC MAC address(<MacAddress>)
Warning
Received keep-alive message is not equal to the configured VPC MAC address
<MacAddress> MAC address
VPC system priority(<Priority>) in the received keep-alive message is not equal to the configured VPC system priority(<Priority>)
686 December/2018
FUJITSU PSWITCH
Warning
Message Collection
Received keep-alive message is not equal to the configured VPC system priority
<Priority> Priority
2.1.45.
OSAPI
Available memory in the system is less than <SizeValue> bytes, taking a snapshot of the memory allocation … A memory profiler task is enabled, and has decided to take a snapshot of RAM allocations per component.
Alert
Available memory is too low.
<SizeValue> An integer for a specific range or a limit value.
Cannot get this device's unit number (<UnitID>). Reset this device.
Alert
Fail to get this unit's number.
<UnitID> Unit ID
Cannot get this stack manager's unit number (<UnitID>). Reset this device.
Alert
Fail to get the manager's unit number.
<UnitID> Unit ID
Finished taking snapshot of the memory allocation.
Alert
Used to trace code, not error.
Trying to release NULL memory. The system may be in an inconsistent state. Recommend rebooting the system now.
December/2018 687
Message Collection
Critical
Release the memory but it is null.
FUJITSU PSWITCH
Failed to delete VRRP IP Address <IPAddress> on interface
<InterfaceNumber> in the linux stack.
Debug
Fail to delete the primary ipv4 address in stack.
<IPAddress> ip_address, or, ipv6_address, or hostname
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Mark <DebugInt> added to the driver family <DebugInt>
Debug
Used to trace code, not error.
<DebugInt> Integer for debug.
Monitor PID <ID> registered with driver family <FamilyType>.
Debug
Used to trace code, not error.
<ID> ID
<FamilyType> type indicate ipv4 or ipv6(ex. L7_AF_INET, L7_AF_INET6,...) or generic family type
PID <ID> added to the driver family <FamilyType>.
Debug
Used to trace code, not error.
<ID> ID
<FamilyType> type indicate ipv4 or ipv6(ex. L7_AF_INET, L7_AF_INET6,...) or generic family type
Bad Return status of mkdir <ErrorCode> , error - <ErrorMessage>
688 December/2018
FUJITSU PSWITCH
Error
The create the dir action is bad.
<ErrorCode> Error code
<ErrorMessage> Error message
Message Collection
Bad Return status of mount <ErrorCode> , child exit value
<ErrorCode> error - <ErrorMessage>
Error
The mount action is bad.
<ErrorCode> Error code
<ErrorMessage> Error message
Bad Return status of umount <ErrorCode> , error - <ErrorMessage>
Error
The umount action is bad.
<ErrorCode> Error code
<ErrorMessage> Error message
Failed to give cpuUtilSema <MemoryAddress>
Error
Fail to give the cpu utilization table lock
<MemoryAddress> Memory address
File close failed for descriptor <FileDescriptor>.
Error
Fail to do file close.
<FileDescriptor> File descriptor for socket
Invalid protocol <TypeValue> is configured!
Error
The protocol type is unknown.
<TypeValue> Type Value
Netlink socket- set socket option failed for option SO_SNDBUF, sock id - <SocketID>, Error - <ErrorMessage>
December/2018 689
Message Collection
Error
Fail to set socket option.
<SocketID> Socket ID
<ErrorMessage> Error message
FUJITSU PSWITCH
osapiFree call from compId (<ComponentID>), memory location
(<MemoryAddress>).
Error
The memory can't be free.
<ComponentID> Component ID
<MemoryAddress> Memory address
system returned error for mkdir
Error
Fail to create the dir.
system returned error for mount
Error
Fail to mount the path.
system returned error for umount.
Error
Fail to umout the path.
Total CPU Utilization <CpuUtilization> for period <TimeValue> task <TaskID> has become negative. Resetting it to 0
Error
Reset CPU utilization to zero.
<CpuUtilization> CPU utilization
<TimeValue> Time Value
<TaskID> Task ID
Trying to free memory at address <MemoryAddress> that has already been freed. The system may be in an inconsistent state. Recommend rebooting the system now.
690 December/2018
FUJITSU PSWITCH
Error
To free the memory but it is not in used memory.
<MemoryAddress> Memory address
<CrashlogID> Crashlogs found.
Informational
Used to trace code, not error.
<CrashlogID> Crash log ID
<CrashlogID> Kernel Crashlogs found.
Informational
Used to trace code, not error.
<CrashlogID> Crash log ID
Message Collection
Address Family is not Supported.
Informational
Set the TFTP socket but the family type is invalid.
Could not save baudrate to boot environment...
Informational
Fail to set the boot environment.
Error adding a route in the IP stack routing table.
Informational
Fail to control the socket IO.
Ethtool command process failed for type <TypeValue>. Reason: unexpected netlink message! message length = <LengthValue>
December/2018 691
Message Collection
Informational
Netlink message type is invalid.
<TypeValue> Type Value
<LengthValue> ipv6 prefix length
FUJITSU PSWITCH
Ethtool command process failed. Reason: invalid netlink message! message length = <LengthValue>
Informational
Process the invalid netlink message.
<LengthValue> ipv6 prefix length
Failed to add local route to <IPAddress> <Mask> on interface
<InterfaceNumber> to the IP stack routing table <ID>.
Informational
Fail to sends a netlink message to the kernel either to create/delete a routing table OR add/delete a route from the routing table.
<IPAddress> ip_address, or, ipv6_address, or hostname
<Mask> Mask value
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<ID>
0/1, 0/0/1
ID
Failed to add route table <ID> for packets originated from IP stack with source IP address <IPAddress>.
Informational
Fail to sends a netlink message to the kernel either to create/delete a routing table OR add/delete a route from the routing table.
<ID> ID
<IPAddress> ip_address, or, ipv6_address, or hostname
Failed to add route to <IPAddress> <Mask> via <IPAddress> on interface <InterfaceNumber> to the IP stack routing table <ID>.
692 December/2018
FUJITSU PSWITCH
Informational
Message Collection
Fail to sends a netlink message to the kernel either to create/delete a routing table OR add/delete a route from the routing table.
<IPAddress> ip_address, or, ipv6_address, or hostname
<Mask> Mask value
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<ID>
0/1, 0/0/1
ID
Failed to delete route table <ID> from IP stack.
Informational
Fail to sends a netlink message to the kernel either to create/delete a routing table OR add/delete a route from the routing table.
<ID> ID
Failed to open socket.
Informational
Fail to create the socket.
Failed to send the netlink message, rv = <ErrorCode>.
Informational
Fail to send netlink message.
<ErrorCode> Error code
ftp <TransferDirection> transfer failed - FTP server:(<IPAddress>) User:(<UserName>) file name:(<FileName>)
Informational
FTP get command fail.
<TransferDirection> "download" or "upload"
<IPAddress>
<UserName>
<FileName> ip_address, or, ipv6_address, or hostname
User name
Log is created by this file.
intf <InterfaceNumber>, <InterfaceNumber>: Could not get type, rc = <ErrorCode>
December/2018 693
Message Collection
Informational
FUJITSU PSWITCH
Fail to get internal interface type associated with the internal interface number.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<ErrorCode>
0/1, 0/0/1
Error code
intf <InterfaceNumber>, <InterfaceNumber>: Could not get configId, rc = <ErrorCode>
Informational
Fail to get the configuration ID for the given Internal Interface ID
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<ErrorCode> Error code
intIfNum <InterfaceNumber>: unable to get interface name.
Informational
Failed to get the interface name for the specified interface.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Kernel Free Memory Check failure occured.<FunctionName>
<FileLineNumber>
Informational
Fail to convert the provided char array into a 32 bit unsigned integer.
<FunctionName> Log is created by this function.
<FileLineNumber> Log is created by this line.
Netlink message process failed. Reason: received error message, error name <ErrorMessage>
Informational
Received error netlink message
<ErrorMessage> Error message
Netlink message process for interface (<InterfaceNumber>). Link state <Operation>
694 December/2018
FUJITSU PSWITCH
Informational
Message Collection
Verify the FPTI interface name. Used to trace, Not error.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<Operation>
0/1, 0/0/1
Operation, "Add", "Remove", "Up", "Down", "Enable",
"Disable" …
Netlink message process received netlink message, message length
= <LengthValue>
Informational
Used to trace code, not error.
<LengthValue> ipv6 prefix length
New kernel dump collected <ErrorMessage>.
Informational
Used to trace kernel dump.
<ErrorMessage> Error message
nvStoreRegister failed!
Informational
Fail to register a components non-volitale save routine and factory defaults restore routine
Oldest crashlog (<CrashlogID>) will be deleted if another crash happens.
Informational
Used to alert, not error.
<CrashlogID> Crash log ID
Oldest Kernel crashlog (<CrashlogID>) will be deleted if another crash happens.
Informational
Used to alert, not error.
<CrashlogID> Crash log ID
osapiArpFlush: failed to open dump socket.
December/2018 695
Message Collection
Informational
Fail to open a netlink socket for dump.
FUJITSU PSWITCH
osapiArpFlush: failed to send dump request.
Informational
Fail to send a netlink dump request.
osapiDefaultRouterGet: could not get interface
<InterfaceNumber>! errno = <ErrorCode>
Informational
Fail to control the socket IO.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<ErrorCode> Error code
osapiDefaultRouterGet: could not open socket for ifreq! errno =
<ErrorCode>
Informational
Fail to create the socket.
<ErrorCode> Error code
osapiInetNtop error for <IPAddress>
Informational
Fail to create ascii displayable string from IP (4/6) address
<IPAddress> ip_address, or, ipv6_address, or hostname
osapiIpv6NbrAdd: Neighbor add failed, as message send to netlink failed.
Informational
Fail to find the neighbor.
osapimRouteEntryAdd - failed to open socket.
696 December/2018
FUJITSU PSWITCH
Informational
Fail to create the socket.
Message Collection
osapimRouteEntryDelete - Unsupported protocol <TypeValue>
Informational
When protocol is unknown.
<TypeValue> Type Value
osapiNbrFlushCallback(): error! corrupt datagram length!
Informational
The packet length is low than zero.
osapiNbrFlushCallback(): sending delete failed for <IPAddress>.
Informational
Fail to send the message.
<IPAddress> ip_address, or, ipv6_address, or hostname
osapiNetIPGet: unable to open a socket! sock = <SocketID>.
Informational
Fail to create the socket.
<SocketID> Socket ID
osapiNetlinkDumpOpen: unable to bind socket! errno = <ErrorCode>
Informational
Fail to bind the socket.
<ErrorCode> Error code
osapiNetlinkDumpProcess: error receiving arp table contents! errno = <ErrorCode>.
December/2018 697
Message Collection
Informational
Fail to receive the meaasge.
<ErrorCode> Error code
FUJITSU PSWITCH
osapiNetlinkDumpProcess: wrong sequence number, got
<SequenceNumber>, expected <SequenceNumber>!
Informational
The packet sequence number is invalid.
<SequenceNumber> Sequence number
osapiPingTimed - osapiTaskCreate error <ErrorCode>
Informational
Fail to create the ping rx task.
<ErrorCode> Error code
Ping command failed for <IPAddress>
Informational
The network is unreachable.
<IPAddress> ip_address, or, ipv6_address, or hostname
Unable to Swap Kernel.
Informational
The kernel swap functional is fail.
Can't bind <SocketName> socket to group <GroupID>. Error:
<ErrorMessage>
Notice
Fail to bind the socket.
<SocketName>
<GroupID>
<ErrorMessage>
Socket name
Group ID
Error message
Can't get <SocketName> socket name. Error: <ErrorMessage>
698 December/2018
FUJITSU PSWITCH
Notice
Fail to get the socket name.
<SocketName> Socket name
<ErrorMessage> Error message
Message Collection
Couldn't create file <FileName> while applying core dump setup.
Please see space availability or file permission.
Notice
System file create fail.
<FileName> Log is created by this file.
Entering into BCM shell. Management access will be blocked during this operation.
Notice
Used to trace code, not error.
EOF on netlink <SocketName>.
Notice
Fail to receive the end netlink message.
<SocketName> Socket name
Error adding route to <IPAddress>/<Mask> via <IPAddress> on interface <InterfaceNumber> to the IP stack routing table. Error
<ErrorMessage>.
Notice
Fail to control the socket IO.
<IPAddress> ip_address, or, ipv6_address, or hostname
<Mask> Mask value
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<ErrorMessage>
0/1, 0/0/1
Error message
Error in opening file <FileName> When trying to set the echo-ignore-all where this variable is not defined in the proc file sysyem.
December/2018 699
Message Collection
Notice
Fail to set echo-ignore-all
<FileName> Log is created by this file.
FUJITSU PSWITCH
Error in opening file <FileName> When trying to set the icmp_ratelimit where this variable is not defined in the proc file sysyem.
Notice
Fail to set the ICMPv4 Rate limit.
<FileName> Log is created by this file.
Error in opening file <FileName> When trying to set the ipv6_enable where this variable is not defined in the proc file sysyem.
Notice
Fail to set ipv6 interface.
<FileName> Log is created by this file.
Exiting from BCM shell.Management access is now available.
Notice
Used to trace code, not error.
Failed to add route to <IPAddress> <Mask> via <IPAddress>
(interface <InterfaceNumber>) using netlink socket to the IP stack routing table.
Notice
Get name string for the specified interface is not match.
<IPAddress> ip_address, or, ipv6_address, or hostname
<Mask> Mask value
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to add the IPv6 route using netlink socket. Network -
<IPAddress>, Prefix len - <LengthValue>, gateway - <IPAddress>
700 December/2018
FUJITSU PSWITCH
Notice
Message Collection
Fail to update routing table via netlink socket
<IPAddress> ip_address, or, ipv6_address, or hostname
<LengthValue> ipv6 prefix length
Failed to Create Interface. Out of memory at system initialization time.
Notice
Fail to allocate memory to Interface.
Failed to delete a route from the IP stack routing table.
Notice
Fail to control the socket IO.
Failed to delete route to <IPAddress> <Mask> via <IPAddress>
(interface <InterfaceNumber>) using netlink socket to the IP stack routing table.
Notice
Fail to update routing table via netlink socket.
<IPAddress> ip_address, or, ipv6_address, or hostname
<Mask> Mask value
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to get the stack ifIndex for the interface
<InterfaceNumber> (<InterfaceNumber>)
Notice
Fail to get stack's interface index.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to get the stack ifIndex for the interface
<InterfaceNumber>, interface name <InterfaceNumber>.
December/2018 701
Message Collection
Notice
FUJITSU PSWITCH
Convert interface number to stack interfacet index is not match.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to open netlink socket to push route updates to stack.
Notice
Fail to create netlink socket.
Failed to retrieve MAC Address of interface <InterfaceNumber>.
Notice
Fail to gets the MAC address for the port in the local unit for the specified slot and port.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to send gratuitous arp on <InterfaceNumber> with error
<ErrorMessage>.
Notice
Fail to control the socket IO.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<ErrorMessage> Error message
Failed to set hostname with value <IPAddress>. errno=<ErrorCode>
Notice
Fail to set the host name.
<IPAddress> ip_address, or, ipv6_address, or hostname
<ErrorCode> Error code
Failed to Set VRRP IP Address <IPAddress> on interface
<InterfaceNumber> in the linux stack.
702 December/2018
FUJITSU PSWITCH
Notice
Message Collection
Fail to set the primary ipv4 address mask in stack
<IPAddress> ip_address, or, ipv6_address, or hostname
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to Set VRRP IP Address mask <Mask> on interface
<InterfaceNumber> in the linux stack.
Notice
Fail to set the primary ipv4 address mask in stack
<Mask> Mask value
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
ioctl on <InterfaceNumber> failed: addr: <IPAddress>, err:
<ErrorCode>. Failed trying to set the IP address (in hex as
<IPAddress>) of the interface with Linux name <InterfaceNumber>, and the interface does not exist. Sometimes this is a harmless race condition (e.g. we try to set address 0 when DHCPing on the network port (dtl0) at bootup, before it's created using TAP).
Notice
Fail to control the socket IO.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<IPAddress>
<ErrorCode>
0/1, 0/0/1 ip_address, or, ipv6_address, or hostname
Error code
Log_Init: Corrupt event log; erasing. Event log file had a non-blank entry after a blank entry; therefore, something was messed up.
Notice
Event log file is messed up. Erase it.
Log_Init: Flash (event) log full; erasing. Event log file has been cleared; happens at boot time.
December/2018 703
Message Collection
Notice
Log entries pool is full.
FUJITSU PSWITCH
Log_Init: log file error - creating new log file. This pertains to the event log? persistent file in flash. Either it did not exist, or had a bad checksum.
Notice
Fail to read the log file.
Message received on <SocketName> has unexpected sender address length = <LengthValue>
Notice
The sender address name length is to long.
<SocketName> Socket name
<LengthValue> ipv6 prefix length
osapimRouteEntryDelete, errno <ErrorCode> deleting <IPAddress> from <InterfaceNumber>. Error adding or deleting an IPv4 route
(listed in hex as <IPAddress>), on the interface with Linux name
<InterfaceNumber> Error code can be looked up in errno.h.
Notice
Fail to control the socket IO.
<ErrorCode> Error code
<IPAddress> ip_address, or, ipv6_address, or hostname
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
osapiPingTimed - osapiTaskCreate error <ErrorCode>
Notice
Fail to create the ping task.
<ErrorCode> Error code
osapiSemaTake failed. The requested semaphore can not be taken because: the call is made from an ISR or the semaphore ID is invalid.
704 December/2018
FUJITSU PSWITCH
Notice
Fail to lock the memory.
Message Collection
ping: sendto error. Trouble sending an ICMP echo request packet for the UI 'ping' command. Maybe there was no route to that network.
Notice
Send packet error.
Tap monitor select failed repeatedly. Last error was
<ErrorMessage>.
Notice
Tap select error.
<ErrorMessage> Error message
Unable to open TAP device. The <FileName> file is missing. Trying to open <FileName> file.
Notice
Fail to open the TAP device.
<FileName> Log is created by this file.
Unable to open TUN device. The <FileName> file is missing or the kernel is missing 'Universal TUN/TAP device driver support'
(CONFIG_TUN).
Notice
Fail to open the TUN device.
<FileName> Log is created by this file.
Invalid address family <FamilyType> for remote address of TCP connection while setting TCP MD5 password.
December/2018 705
Message Collection
Warning
FUJITSU PSWITCH
To setting socket but family type is invalid.
<FamilyType> type indicate ipv4 or ipv6(ex. L7_AF_INET, L7_AF_INET6,...) or generic family type
2.1.46.
OSPF
Failure adding AllSPFRouters multicast address to hardware for interface <InterfaceNumber>.
Error
Failure adding the 224.0.0.5 to hardware.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failure adding AllDRouters multicast address to hardware for interface <InterfaceNumber>.
Error
Failure adding the 224.0.0.6 to hardware.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to delete "Network <IPAddress> <Mask> area <AreaID>"
Informational
Fail to delete the OSPF area entry.
<IPAddress> ip_address, or, ipv6_address, or hostname
<Mask>
<AreaID>
Mask value
Area ID
WARNING: Invalid build - OSPF component was not initialized
706 December/2018
FUJITSU PSWITCH
Informational
Message Collection
OSPF component was not initialized during system initialization
2.1.47.
OUTBOUND_TELNET
<FileName> <FileLineNumber>: <FunctionName>: Unable to create
Outbound Telnet data control semaphore
Informational
Create Telnet data control semaphore failed.
<FileName> Log is created by this file.
<FileLineNumber>
<FunctionName>
Log is created by this line.
Log is created by this function.
<FileName> <FileLineNumber>: telnetCnfgrInitPhase1Process:
Error allocating memory for Outbound Telnet Config structure
Informational
Initialize Telnet failed.
<FileName>
<FileLineNumber>
Log is created by this file.
Log is created by this line.
<FileName> <FileLineNumber>: telnetCnfgrInitPhase1Process:
Error starting Outbound Telnet apps
Informational
Starting Telnet failed.
<FileName>
<FileLineNumber>
Log is created by this file.
Log is created by this line.
<FileName> <FileLineNumber>: telnetCnfgrInitPhase2Process:
Could not register with nvStore
Informational
Could not register Telmet config.
<FileName> Log is created by this file.
<FileLineNumber> Log is created by this line.
<FileName> <FileLineNumber>: telnetCnfgrInitPhase3Process:
Outbound Telnet unable to apply config
December/2018 707
Message Collection
Informational
Apply Telnet config file failed.
<FileName> Log is created by this file.
<FileLineNumber> Log is created by this line.
FUJITSU PSWITCH
<FileName> <FileLineNumber>: telnetCnfgrInitPhase3Process:
Outbound Telnet unable to read config file
Informational
Read Telnet config file failed.
<FileName> Log is created by this file.
<FileLineNumber> Log is created by this line.
OBT: Error finding session for socket <SocketFD> for escape processing.
Informational
Error finding session for escape processing.
<SocketFD> File descriptor for socket
OBT: Error reading socket <SocketFD> for escape processing in session <ID>.
Informational
Error reading socket for escape processing.
<SocketFD> File descriptor for socket
<ID> ID
telnetApplyConfigData: Error invalid admin mode
Informational
Setting the Telnet status failed.
telnetInitialize: unable to add session; socket=<SocketFD>
Informational
Added the Telnet session failed.
<SocketFD> File descriptor for socket
telnetLineModeSet: unable to set line mode terminal parameters; socket=<SocketFD>
708 December/2018
FUJITSU PSWITCH
Informational
Setting the Telnet line mode failed.
<SocketFD> File descriptor for socket
Message Collection
telnetProcTask: Bad status on receive message from proc queue
<ErrorCode>
Informational
Process the receive socket failed.
<ErrorCode> Error code
telnetRemoteConnect: unable to connect to remote host
Informational
Create the SNTP remote host failed.
telnetRemoteConnect: unable to create server socket
Informational
Create the SNTP server socket failed.
telnetSave: Error during osapiFsWrite for config file <FileName>
Informational
Write Telnet config file failed.
<FileName> Log is created by this file.
telnetTtype: unable to get terminal type...defaulting to "ansi"
Informational
Get terminal type failed.
2.1.48.
OVSDB
VTEP service does not response.
December/2018 709
Message Collection
ERROR
VTEP service does not response.
FUJITSU PSWITCH
Unable to add the configuration event into ovsdbMsgQ message queue.
ERROR
Unable to add the configuration event into ovsdbMsgQ message queue.
Failed to create ovsdb midle database message queue semaphore.
ERROR
Failed to create ovsdb midle database message queue semaphore.
Failed to create ovsdb midle database semaphore for config database.
ERROR
Failed to create ovsdb midle database semaphore for config database.
Failed to create ovsdb midle database semaphore for timers.
ERROR
Failed to create ovsdb midle database semaphore for timers.
Unable to create mapping thread message queues for ovsdb midle database.
ERROR
Unable to create mapping thread message queues for ovsdb midle database.
Unable to create ovsdb midle database task
ERROR
Unable to create ovsdb midle database task
OVSDB midle database task initialization failed.
710 December/2018
FUJITSU PSWITCH
ERROR
OVSDB midle database task initialization failed.
Message Collection
Failed to allocate a block of memory for OVSDB Configuration
Database.
ERROR
Failed to allocate a block of memory for OVSDB Configuration Database.
Failed to take OVSDB message queue semaphore.
ERROR
Failed to take OVSDB message queue semaphore.
Failed to receive message from OVSDB message queue.
ERROR
Failed to receive message from OVSDB message queue.
Failed to take ovsdb cfgdata semaphore.
ERROR
Failed to take ovsdb cfgdata semaphore.
2.1.49.
PFC
P1 failed pfcIntfCfgData=<MemoryAddress> RWlockCreate returned
<ErrorCode>
Critical
Unable to allocate memory for PFC resource, during initialization phase.
<MemoryAddress> Memory address
<ErrorCode> Error code
P2 failed nim register rc=<ErrorCode>
December/2018 711
Message Collection
Critical
FUJITSU PSWITCH
PFC component cannot register with NIM, during initialization phase.
<ErrorCode> Error code
P2 failed nv register rc=<ErrorCode>
Critical
Unable to register save-restore routine with NVRAM during initialization phase.
<ErrorCode> Error code
Fail to add no-drop Pri(<Priority>) on <InterfaceNumber>:too many system no-drop priorities(<CountValue>)
Debug
Unable to add no-drop priority due to exceed system support. User should make sure corrent PFC configuration is correct or not.
<Priority> Priority
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<CountValue> Count Value
Failed to get pfcRxPriority(<Priority>) ctr for <InterfaceNumber> with rc=<ErrorCode>
Debug
Unable to get PFC statistic from hardware.
<Priority> Priority
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<ErrorCode> Error code
Failed to get pfcSystemRxPriority(<Priority>) ctr with rc=<ErrorCode>
Debug
Unable to get PFC statistic from hardware.
<Priority> Priority
<ErrorCode> Error code
Stat size too big for buffer <SizeValue> > <MaxValue>
712 December/2018
FUJITSU PSWITCH
Error
Message Collection
Parameter error happened when getting port's PFC statistic from hardware. It should not happened, except software bug occur.
<SizeValue> An integer for a specific range or a limit value.
<MaxValue> Maximum value
Disabled PFC on port <InterfaceNumber> due to neighbor disappeared.
Notice
Disabled PFC on port due to neighbor disappeared.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
invalid event event:<EventID>. <FileName>:<FileLineNumber>.
Notice
The PFC component receives unsupported event type. It should not happened, except software bug occur.
<EventID> Event ID
<FileName>
<FileLineNumber>
Log is created by this file.
Log is created by this line.
Disabled PFC on port <InterfaceNumber> due to incompatible configuration from neighbor (priority vector is <BitmapValue>).
Warning
Configuration source port is selected. On specific interface, the peer's configuration is not compatible with configuration source port and PFC configuration will not apply on this port.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<BitmapValue>
0/1, 0/0/1
Priority Bitmap for PFC; a 8-bits variable
Disabled PFC on port <InterfaceNumber> due to multiple neighbors detected.
December/2018 713
Message Collection
Warning
FUJITSU PSWITCH
Disabled PFC on port due to multiple neighbors detected. One port interface only can communicate with one peer.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
nimIntfQuery failed for intf <InterfaceNumber>
Warning
Unable to get interface information from NIM. There is synchronization issue between NIM and PFC component about interface information.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Port <InterfaceNumber> is received incompatible PFC configuration from neighbor (priority vector is <BitmapValue>).
Warning
Configuration source port is not yet selected. But the peer's configuration is not compatible.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<BitmapValue> Priority Bitmap for PFC; a 8-bits variable
2.1.50.
PING
[VRF-ID:<VrfID>] Invalid ping entry handle - <SessionNumber>.
"The ping session index in the handle is greater than the max sessions allowed."
Informational
Invalid ping session number.
<VrfID> ID of Virtual Routing and Forwarding Instance
<SessionNumber> Session number
[VRF-ID:<VrfID>] Invalid ping entry handle - <SessionNumber>.
"There is no valid ping session with this handle."
714 December/2018
FUJITSU PSWITCH
Informational
Message Collection
Invalid ping session number.
<VrfID> ID of Virtual Routing and Forwarding Instance
<SessionNumber> Session number
2.1.51.
POLICY
Failure in setting system broadcast storm mode to <State>.
Error
Failure in setting system broadcast storm mode.
<State> State
Failure in setting system flow control mode to <State>.
Error
Failure in setting system flow control mode
<State> State
TCAM API version does not match
Error
TCAM API version does not match.
Could not create traffic control task.
Informational
Could not create traffic control task.
Error in accessing POLICY config data on interface
<InterfaceNumber> in policy map interface configuration.
December/2018 715
Message Collection
Informational
FUJITSU PSWITCH
Might be a table management error between policyCfgData and policyMapTbl; or a synchronization issue between NIM and component w.r.t interface creation/deletion.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Error on call to osapiFsWrite routine on config file <FileName>.
Informational
Error on call to osapiFsWrite routine on config file
<FileName> Log is created by this file.
Error on call to policy map interface configuration routine outside the EXECUTE state.
Informational
Check the policy config state to make sure the policy state is ready.
Failed nim registration for Interface Change Callback
Informational
Failed nim registration for Interface Change Callback.
Failed to apply broadcast storm control mode <State> and threshold
<ThresholdValue> during detach process on interface
<InterfaceNumber>.
Informational
Check the policy config state to make sure the policy state is ready, or can't get the unit slot port.
<State> State
<ThresholdValue> The value for general threshold setting
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to apply broadcast storm control mode and thresholds on interface <InterfaceNumber>.
716 December/2018
FUJITSU PSWITCH
Informational
Message Collection
Failed to apply broadcast storm control mode and thresholds
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to apply default flow control mode <State> during detach process on interface <InterfaceNumber>.
Informational
Check the policy config state to make sure the policy state is ready, or can't get the unit slot port.
<State> State
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to apply flow control mode <State> on interface
<InterfaceNumber>.
Informational
Failed to apply flow control mode
<State> State
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to apply multicast storm control mode and thresholds on interface <InterfaceNumber>.
Informational
Failed to apply multicast storm control mode and thresholds
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to apply unicast storm control mode <State> and threshold
<ThresholdValue> during interface <InterfaceNumber> detach process.
December/2018 717
Message Collection
Informational
FUJITSU PSWITCH
Check the policy config state to make sure the policy state is ready, or can't get the unit slot port.
<State> State
<ThresholdValue> The value for general threshold setting
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to apply unicast storm control mode and thresholds on interface <InterfaceNumber>.
Informational
Failed to apply unicast storm control mode and thresholds
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failure in setting <StormControlType> storm mode to <State> and threshold to <ThresholdValue> on interface <InterfaceNumber>.
Informational
Failure in setting storm mode
<StormControlType> broadcast, multicast, unicast
<State> State
<ThresholdValue> The value for general threshold setting
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failure in setting interface <InterfaceNumber> and flow control mode to <State>.
Informational
Failure in setting interface
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<State>
0/1, 0/0/1
State
Failure in setting interface <InterfaceNumber> broadcast storm mode to <State>
718 December/2018
FUJITSU PSWITCH
Informational
Message Collection
Failure in setting interface broadcast storm mode.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<State>
0/1, 0/0/1
State
Failure in setting interface <InterfaceNumber> broadcast storm threshold to <State>.
Informational
Failure in setting interface broadcast storm threshold.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<State> State
Failure in setting interface <InterfaceNumber> multicast storm mode to <State>.
Informational
Failure in setting interface multicast storm mode.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<State>
0/1, 0/0/1
State
Failure in setting interface <InterfaceNumber> unicast storm mode to <State>.
Informational
Failure in setting interface unicast storm mode.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<State> State
Failure in setting interface <InterfaceNumber> unicast storm threshold to <ThresholdValue>.
December/2018 719
Message Collection
Informational
FUJITSU PSWITCH
Failure in setting interface unicast storm threshold.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<ThresholdValue>
0/1, 0/0/1
The value for general threshold setting
Failure in setting system broadcast storm threshold to
<ThresholdValue>.
Informational
Failure in setting system broadcast storm threshold.
<ThresholdValue> The value for general threshold setting
Failure in setting system multicast storm mode to <State>.
Informational
Failure in setting system. multicast storm mode
<State> State
Failure in setting system multicast storm threshold to
<ThresholdValue>.
Informational
Failure in setting system multicast storm threshold.
<ThresholdValue> The value for general threshold setting
Failure in setting system unicast storm mode to <State>.
Informational
Failure in setting system unicast storm mode.
<State> State
Failure in setting system unicast storm threshold to
<ThresholdValue>.
Informational
Failure in setting system unicast storm threshold.
<ThresholdValue> The value for general threshold setting
Failure setting interface <InterfaceNumber> multicast storm threshold to <ThresholdValue>.
720 December/2018
FUJITSU PSWITCH
Informational
Message Collection
Failure setting interface multicast storm threshold.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<ThresholdValue>
0/1, 0/0/1
The value for general threshold setting
policyCnfgrInitPhase1Process: Task could not be started.
Informational
policyCnfgrInitPhase1Process: Task could not be started.
Received an interface event callback while POLICY is not in EXECUTE state.
Informational
Check the policy config state to make sure the policy state is ready.
Unable to initialize traffic control task.
Informational
Unable to initialize traffic control task.
Interface <InterfaceNumber> is D-Disabled due to
<StormControlType> storm control
Notice
Interface is D-Disabled.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<StormControlType> broadcast, multicast, unicast
2.1.52.
PORT_MACLOCK
Couldn't enqueue message to PML queue.
December/2018 721
Message Collection
Critical
Unable to send notification message to PML queue
FUJITSU PSWITCH
<FunctionName> <InterfaceNumber> <MacAddress> <VlanID> static count <CountValue> dynamic count <CountValue>.
Debug
Debug message for PML unknown mac address callback
<FunctionName> Log is created by this function.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<MacAddress>
<VlanID>
<CountValue>
MAC address
VLAN ID
Count Value
<FunctionName>:Port-security violation on the intf
<InterfaceNumber> mac=<MacAddress> vlan=<VlanID> static count
<CountValue> dynamic count <CountValue>.
Debug
Debug message for PML unknown mac address callback because Port-security violation
<FunctionName> Log is created by this function.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<MacAddress>
<VlanID>
<CountValue>
MAC address
VLAN ID
Count Value
Error modifying PML data[<VlanID>:<MacAddress>] for interface
<LagInterface>.
Error
Failed to add specific PML mac address to FDB mac table
<VlanID> VLAN ID
<MacAddress>
<LagInterface>
MAC address
80-143
Could not create task pmlTask.
722 December/2018
FUJITSU PSWITCH
Informational
Unable to create PML main task during system init
Message Collection
Error accessing PML cfg data for interface <InterfaceNumber> in pmlMapIntfIsOperational.
Informational
A default configuration does not exist for this interface. Typically a case when a new interface is created and has no pre-configuration
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
nimIntfQuery failed for intf <InterfaceNumber>.
Informational
Failed to check specific NIM interface is attached
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
pmlInit: msgQueue creation error.
Informational
Unable to create PML message queue during system init
pmlSave: Error on call to sysapiCfgFileWrite file <FileName>.
Informational
Unable to save PML config data to system config file
<FileName> Log is created by this file.
pmlTask(): invalid message type:<TypeValue>.
<FileName>:<FileLineNumber>.
Informational
Unable to receive valid queue message type for PML task
<TypeValue> Type Value
<FileName> Log is created by this file.
<FileLineNumber> Log is created by this line.
Port MAC Locking: Unable to register with NIM.
December/2018 723
Message Collection
Informational
FUJITSU PSWITCH
Unable to register to NIM interface changes callback during PML phase 2 init
Received an interface change callback while not ready to receive it.
Informational
Unable to receive interface change callback because phase init is not finished
Unable to initialize pmlTask().
Informational
Unable to init PML main task during system init
Error accessing PML config data for interface <InterfaceNumber> in pmlMapIntfIsConfigurable. A default configuration does not exist for this interface. Typically a case when a new interface is created and has no pre-configuration.
Notice
A default configuration does not exist for this interface. Typically a case when a new interface is created and has no pre-configuration
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
PML dynamic count (<CountValue>) exceeded limit (<MaxValue>) on intf <InterfaceNumber>, flushing.
Warning
PML dynamic count is exeeded limit on interface, so all FDB entries would be flushed
<CountValue> Count Value
<MaxValue> Maximum value
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
2.1.53.
PORT_MIRROR
Unable to create read/write lock for mirroring
724 December/2018
FUJITSU PSWITCH
Critical
Unable to create read/write lock for mirroring.
Message Collection
Cannot unconfigure destination interface configured as RSPAN VLAN
<VlanID> for monitor session <ID>.
Error
Cannot unconfigure destination interface configured as RSPAN VLAN for monitor session.
<VlanID> VLAN ID
<ID> ID
Cannot unconfigure source interface configured as VLAN <VlanID> for monitor session <ID>.
Error
Cannot unconfigure source interface configured as VLAN for monitor session.
<VlanID> VLAN ID
<ID> ID
Destination interface cannot be removed from session (<ID>).
Error
Destination interface cannot be removed from session.
<ID> ID
Intf <InterfaceNumber> activate, rc = <ErrorCode>
Error
Activate mirroring interface failed.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<ErrorCode>
0/1, 0/0/1
Error code
Intf <InterfaceNumber> create, rc = <ErrorCode>
December/2018 725
Message Collection
Error
FUJITSU PSWITCH
Create mirroring interface failed.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<ErrorCode>
0/1, 0/0/1
Error code
Mirror Session: Failed to Modify the mirror type from
(<TypeValue>) to (<TypeValue>) for session (<ID>)
Error
Failed to Modify the mirror type for session
<TypeValue> Type Value
<ID> ID
Mirror Session: Failed to set the mode for session (<ID>)
Error
Failed to set the mode for session.
<ID> ID
Reflector interface cannot be removed from session (<ID>).
Error
Reflector interface cannot be removed from session.
<ID> ID
VLAN <VlanID> could not be defined as remote-span. Maximum number of RSPAN VLAN already defined.
Error
VLAN could not be defined as remote-span. Maximum number of RSPAN VLAN already defined.
<VlanID> VLAN ID
VLAN based Mirroring: Failed to Disable the VLAN based mirroring session(<ID>)
726 December/2018
FUJITSU PSWITCH
Error
Disabled VLAN based mirroring function failed.
<ID> ID
Message Collection
Vlan Queue Sync check has not succeeded for RSPAN vlan <VlanID>
Error
Vlan Queue Sync check has not succeeded for RSPAN vlan.
<VlanID> VLAN ID
Vlan validity check has not succeeded for RSPAN vlan <VlanID>
Error
Vlan validity check has not succeeded for RSPAN vlan.
<VlanID> VLAN ID
Destination is not port based for the mirroring session <ID>
Informational
Destination is not port based for the mirroring session.
<ID> ID
Error on call to sysapiCfgFileWrite routine on config file
<FileName>
Informational
Write routine on config file failed.
<FileName> Log is created by this file.
Mirroring: Failed to notify components of probe status change
Informational
Failed to notify components of probe status change.
mirrorIntfApplyConfigData(): Failed to get direction for intf
<InterfaceNumber>
December/2018 727
Message Collection
Informational
FUJITSU PSWITCH
Failed to get direction for interface.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
mirrorIntfChangeCallback: Received an interface event callback while not in EXECUTE state.
Informational
Received an interface event callback while not in EXECUTE state.
mirrorSourcePortSet failed to disable source interface
<InterfaceNumber> in direction <Direction> in session <ID>.
Informational
Disabled mirroring function failed.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<Direction>
<ID>
0/1, 0/0/1
Direction
ID
mirrorSourcePortSet failed to enable source interface
<InterfaceNumber> in direction <Direction> in session <ID>.
Informational
Enabled mirroring function failed.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<Direction>
<ID>
0/1, 0/0/1
Direction
ID
nimIntfQuery failed for intf <InterfaceNumber>
Informational
Interface attached failed.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
A physical interface has been already configured as a source interface. At the same time physical interface and VLAN interface cannot be configured as source interfaces for a session.
728 December/2018
FUJITSU PSWITCH
Warning
Message Collection
A physical interface has been already configured as a source interface. At the same time physical interface and VLAN interface cannot be configured as source interfaces for a session.
Cannot configure the requested mirroring session as the required number of resources are not available.
Warning
Cannot configure the requested mirroring session as the required number of resources are not available.
Cannot configure the requested mirroring session as the required resources are not available.
Warning
Cannot configure the requested mirroring session as the required resources are not available.
Cannot configure the requested mirroring session as the session is reserved by other components.
Warning
Cannot configure the requested mirroring session as the session is reserved by other components.
Destination interface (<InterfaceNumber>) cannot be configured as source interface.
Warning
Added the mirror source port of destination interface failed.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Destination interface (<InterfaceNumber>) cannot participate in source vlan (<VlanID>).
December/2018 729
Message Collection
Warning
FUJITSU PSWITCH
Destination interface cannot participate in source vlan.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<VlanID>
0/1, 0/0/1
VLAN ID
Destination interface must be removed before re-configuring it.
Warning
Destination interface must be removed before re-configuring it.
Interface (<InterfaceNumber>) cannot be configured as reflector interface as it is already configured as destination interface for session <ID>.
Warning
Interface cannot be configured as reflector interface as it is already configured as destination interface for session.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<ID>
0/1, 0/0/1
ID
Maximum possible mirroring sessions are already configured.
Warning
Maximum possible mirroring sessions are already configured.
Mirror Session: Failed to set the reflector port for session (<ID>)
Warning
Failed to set the reflector port for session.
<ID> ID
Not existing vlan <InterfaceNumber> cannot be configured as source interface for a session.
730 December/2018
FUJITSU PSWITCH
Warning
Message Collection
Not existing vlan cannot be configured as source interface for a session.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Probe interface must be reset before re-configuring it.
Warning
Probe interface must be reset before re-configuring it.
Reflector interface <InterfaceNumber> removed from session
(<ID>).
Warning
Reflector interface removed from session.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<ID> ID
Reflector interface (<InterfaceNumber>) cannot participate in source vlan (<VlanID>).
Warning
Reflector interface cannot participate in source vlan.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<VlanID>
0/1, 0/0/1
VLAN ID
Remote VLAN <VlanID> is already configured as destination for mirroring session <ID>
Warning
Remote VLAN is already configured as destination for mirroring session.
<VlanID> VLAN ID
<ID> ID
RSPAN VLAN <VlanID> is already being used as source for mirroring session <ID>
December/2018 731
Message Collection
Warning
FUJITSU PSWITCH
RSPAN VLAN is already being used as source for mirroring session.
<VlanID> VLAN ID
<ID> ID
Selected interface (<InterfaceNumber>) cannot be configured as a reflector interface. Only physical interface can be configured as a reflector interface.
Warning
Selected interface cannot be configured as a reflector interface. Only physical interface can be configured as a reflector interface.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Selected interface (<InterfaceNumber>) cannot be configured as destination interface. Only physical interface can be configured as destination interface.
Warning
Selected interface cannot be configured as destination interface. Only physical interface can be configured as destination interface.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Selected interface (<InterfaceNumber>) cannot be configured as source interface.
Warning
Added the mirror source port of selected interface failed.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Selected interface (<InterfaceNumber>) is already used.
732 December/2018
FUJITSU PSWITCH
Warning
Message Collection
Selected interface is already used.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Selected VLAN <VlanID> is already configured as private VLAN and cannot be configured as RSPAN VLAN.
Warning
Selected VLAN is already configured as private VLAN and cannot be configured as
RSPAN VLAN.
<VlanID> VLAN ID
sFlow mirroring is not supported on this platform.
Warning
sFlow mirroring is not supported on this platform.
Source and destination cannot be set to remote VLAN at the same time.
Warning
Source and destination cannot be set to remote VLAN at the same time.
Source interface (<InterfaceNumber>) cannot be configured as reflector interface.
Warning
Source interface cannot be configured as reflector interface.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
There is a monitor session configuration conflict. Destination interface cannot participate in source VLAN (<VlanID>). The interface is now removed from session (<ID>).
December/2018 733
Message Collection
Warning
There is a monitor session configuration conflict.
<VlanID> VLAN ID
<ID> ID
FUJITSU PSWITCH
VLAN <VlanID> is already configured as RSPAN VLAN.
Warning
VLAN is already configured as RSPAN VLAN.
<VlanID> VLAN ID
VLAN <VlanID> is already configured as source for mirroring session <ID>
Warning
VLAN is already configured as source for mirroring session.
<VlanID> VLAN ID
<ID> ID
VLAN <VlanID> is being deleted. Currently the VLAN is configured as source interface for monitor session <ID>. Source interface configured as the VLAN is being uncofigured from the monitor session too.
Warning
VLAN is being deleted. Currently the VLAN is configured as source interface for monitor session. Source interface configured as the VLAN is being uncofigured from the monitor session too.
<VlanID> VLAN ID
<ID> ID
VLAN has been already configured as a source interface. At the same time physical interface and VLAN interface cannot be configured as source interafaces for a session.
734 December/2018
FUJITSU PSWITCH
Warning
Added the mirror source port of VLAN interface failed.
2.1.54.
Provider Backbone Bridge
Message Collection
Port is not configured yet. vportId:<MimPortId> vlanId:<VlanID> mac:%MacAddress
DEBUG
System internal error.
<MimPortId>
<VlanID>
Mim Port ID
VLAN ID
Received an unknown FDB entry. vportId:<MimPortId> vlanId:<VlanID> mac:%MacAddress
WARNING
System internal error.
<MimPortId>
<VlanID>
Mim Port ID
VLAN ID
Failed to add a FDB entry to database. vportId:<MimPortId> vlanId:<VlanID> mac:%MacAddress
WARNING
Database is full or system internal error.
<MimPortId> Mim Port ID
<VlanID> VLAN ID
Failed to delete a FDB entry to database. vportId:<MimPortId> vlanId:<VlanID> mac:%MacAddress
WARNING
System internal error.
<MimPortId>
<VlanID>
Mim Port ID
VLAN ID
Unable to allocate resources.
December/2018 735
Message Collection
NOTICE
Insufficient resources for Provider Backbone Bridge module
FUJITSU PSWITCH
Error on call to sysapiSupportCfgFileWrite routine on config file dot1ah_debug.cfg
NOTICE
System internal error when saving configuration file to file system.
Unable to create PBB semaphore()
NOTICE
Error ocurred during PBB initialization.
Failed to allocate a block of memory for PBB Configuration
Database.
ERROR
Error ocurred during PBB initialization. Insufficient resources .
AVL Tree Database initialization for Cfg has failed.
ERROR
Error ocurred during PBB initialization.
Unable to register to NIM for port create
ERROR
Error ocurred during PBB initialization.
Failed to apply configuration data.
NOTICE
Error ocurred during PBB initialization.
2.1.55.
QCN
P1 failed qcnCfg=<QCNConfig> RWlockCreate returned <ErrorCode>
736 December/2018
FUJITSU PSWITCH
Critical
Message Collection
Unable to allocate memory for QCN resource, during initialization phase.
<QCNConfig> QCN configuration
<ErrorCode> Error code
P1 failed qcnData=<QCNData> RWlockCreate returned <ErrorCode>
Critical
Unable to allocate memory for QCN resource, during initialization phase.
<QCNData> QCN data
<ErrorCode> Error code
P1 failed qcnMapTbl=<QCNData> returned <ErrorCode>
Critical
Unable to allocate memory for QCN resource, during initialization phase.
<QCNData> QCN data
<ErrorCode> Error code
P2 failed nim register rc=<ErrorCode>
Critical
QCN component cannot register with NIM, during initialization phase.
<ErrorCode> Error code
P2 failed nv register rc=<ErrorCode>
Critical
Unable to register save-restore routine with NVRAM during initialization phase.
<ErrorCode> Error code
dtl: Fail to configure Pri(<Priority>) on <InterfaceNumber>: for mode (<State>)
December/2018 737
Message Collection
Error
FUJITSU PSWITCH
Unable to apply defense mode configuration to hardware.
<Priority> Priority
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<State> State
Error accessing QCN config data for interface <InterfaceNumber> in qcnIntfIsConfigurable. A default configuration does not exist for this interface. Typically a case when a new interface is created and has no pre-configuration.
Error
There is synchronization issue between NIM and ETS component to process interface creation/deletion. A default configuration does not exist for this interface. Typically a case when a new interface is created and has no pre-configuration.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Request for QCN statistics exceeded allowed buffer (<SizeValue>
> <SizeValue>)
Error
Parameter error happened when getting QCN statistic from hardware. It should not happened, except software bug occur.
<SizeValue> An integer for a specific range or a limit value.
Request to clear QCN statistics exceeded allowed buffer
(<SizeValue> > <SizeValue>)
Error
Parameter error happened when clearing QCN statistic from hardware. It should not happened, except software bug occur.
<SizeValue> An integer for a specific range or a limit value.
Error on call to osapiFsWrite routine on config file <FileName>.
738 December/2018
FUJITSU PSWITCH
Informational
Unable to save QCN configuration to NVRAM.
<FileName> Log is created by this file.
Message Collection
qcnCnfgrInitPhase2Process: Unable to register for lldp_med callback
Informational
Unable to register for LLDP Pdu notification callback, during initialization phase. It may due to lack of resource or duplicate register.
qcnCnfgrInitPhase2Process: Unable to register for qcnVlanDot1pPriorityChangeCallback callback
Informational
Unable to register callback function with VLAN to get notification for VLAN create/delete event.
nimIntfQuery failed for intf <InterfaceNumber>
Warning
Unable to get interface information from NIM. There is synchronization issue between NIM and QCN component about interface information.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
QCN configuration mismatch on intf <InterfaceNumber>
Warning
Received peer switch's QCN configuration, but the configuration doesn't match local setting.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
2.1.56.
QOS_ACL
<FunctionName>: Element ID <ID> received with invalid length
<LengthValue>, expected <LengthValue>.
December/2018 739
Message Collection
Debug
ACL component received invalid element length in message.
<FunctionName> Log is created by this function.
<ID>
<LengthValue>
ID ipv6 prefix length
FUJITSU PSWITCH
Couldn't allocate a buffer.
Error
Failed to allocate a buffer for ACL remark lists.
Couldn't delete all the elements of the Single Linked List
Error
Failed to remove temporary ACL remark node from the temporary remark list
Failed to add remark node to the end of list.
Error
Failed to add ACL remark node to the end of list.
Failed to associate remarks with the rule.
Error
Failed to associate ACL remarks with the ACL rule.
Failed to clear ACL rule count value for AclId : <ID> ruleId :
<AclRuleSequenceNumber> ruleaction : <TypeValue>
Error
Failed to get the ACL rule count value for ACL rule.
<ID> ID
<AclRuleSequenceNumber> rule number
<TypeValue> Type Value
Failed to clear ACL rule count value for IPv6 Acl
740 December/2018
FUJITSU PSWITCH
Error
Failed to clear ACL rule count value for IPv6 ACL.
Message Collection
Failed to create acl remarks linked list
Error
Failed to create ACL remarks entry list.
Failed to create acl remarks linked list for rule
<AclRuleSequenceNumber>.
Error
Failed to create ACL remarks entry list for rules.
<AclRuleSequenceNumber> rule number
Failed to create acl remarks linked list.
Error
ACL component failed to create acl remarks linked list.
Failed to destroy acl remarks linked list for rule
<AclRuleSequenceNumber>.
Error
Failed to destroy ACL remarks entry list for rules.
<AclRuleSequenceNumber> rule number
Failed to destroy ACL remarks linked list.
Error
Failed to destroy ACL remarks entry list.
Failed to get aclType for AclId :<ID>
Error
ACL component failed to get ACL type from rule.
<ID> ID
Failed to get aclType is AclId :<ID>
December/2018 741
Message Collection
Error
Failed to get aclType of the ACL ID
<ID> ID
FUJITSU PSWITCH
Failed to get the correlator value for AclId : <ID> ruleId :
<AclRuleSequenceNumber> ruleaction : <TypeValue>
Error
Failed to get the correlator value for ACL rule.
<ID> ID
<AclRuleSequenceNumber> rule number
<TypeValue> Type Value
Maximum number of remarks is already configured for this ACL.
Error
Failed to add ACL remark because maximum number of remarks is already configured for this ACL.
Maximum number of remarks is already configured on the device.
Error
Failed to add ACL remark because maximum number of remarks is already configured on the device.
<FunctionName> unable to give ACL READ lock
Informational
ACL component give ACL READ lock failure.
<FunctionName> Log is created by this function.
<FunctionName> unable to give ACL WRITE lock
Informational
ACL component give ACL WRITE lock failure.
<FunctionName> Log is created by this function.
<FunctionName> unable to obtain ACL write lock
742 December/2018
FUJITSU PSWITCH
Informational
Unable to obtain ACL component write lock.
<FunctionName> Log is created by this function.
<FunctionName> unable to take ACL READ lock
Informational
ACL component take ACL READ lock failure.
<FunctionName> Log is created by this function.
<FunctionName> unable to take ACL WRITE lock
Informational
ACL component take ACL WRITE lock failure.
<FunctionName> Log is created by this function.
Message Collection
<FunctionName>: ACL received config verification failed.
Informational
ACL received config verification failed.
<FunctionName> Log is created by this function.
<FunctionName>: aclIntfDirListRemove failed for intf=<InterfaceNumber>, dir=<Direction>, acl=<ID>
Informational
ACL component failed to remove rules from the interface.
<FunctionName> Log is created by this function.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<Direction>
<ID>
0/1, 0/0/1
Direction
ID
<FunctionName>: aclRuleCountGet failed for aclId:<ID>, aclType:<TypeValue>
December/2018 743
Message Collection
Informational
ACL component failed to access ACL count.
<FunctionName> Log is created by this function.
<ID>
<TypeValue>
ID
Type Value
FUJITSU PSWITCH
<FunctionName>: aclVlanDirListRemove failed for vlanNum=<VlanID>, dir=<Direction>, acl=<ID>
Informational
ACL component failed to remove rules from the VLAN.
<FunctionName> Log is created by this function.
<VlanID> VLAN ID
<Direction>
<ID>
Direction
ID
<FunctionName>: avlDeleteEntry failed for aclNum=<ID>
Informational
ACL component acccess avlDeleteEntry failed.
<FunctionName> Log is created by this function.
<ID> ID
<FunctionName>: clusterConfigRegister failed.
Informational
ACL component clusterConfigRegister initial is failed.
<FunctionName> Log is created by this function.
<FunctionName>: clusterConfigRxDone failed.
Informational
ACL component acccess clusterConfigRxDone failed.
<FunctionName> Log is created by this function.
<FunctionName>: clusterConfigSendDone failed
744 December/2018
FUJITSU PSWITCH
Informational
ACL component clusterConfigSendDone initial is failed.
<FunctionName> Log is created by this function.
Message Collection
<FunctionName>: clusterMsgRegister failed.
Informational
ACL component clusterMsgRegister initial is failed.
<FunctionName> Log is created by this function.
<FunctionName>: failed to remove aclId:<ID>, aclType:<TypeValue> from intf:<InterfaceNumber>, dir:<Direction>, platAclMaxRulesPerMultilistGet() exceeded.
Informational
ACL component failed to remove rules from the interface.
<FunctionName> Log is created by this function.
<ID>
<TypeValue>
ID
Type Value
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<Direction> Direction
<FunctionName>: failed to remove aclId:<ID>, aclType:<TypeValue> from vlanId:<VlanID>, dir:<Direction>, platAclMaxRulesPerMultilistGet() exceeded.
Informational
ACL component failed to remove rules from the VLAN.
<FunctionName> Log is created by this function.
<ID> ID
<TypeValue>
<VlanID>
<Direction>
Type Value
VLAN ID
Direction
<FunctionName>: invalid ACL configuration, error receiving
IE:<TypeValue>.
December/2018 745
Message Collection
Informational
ACL component accessed invalid configuration for ACL.
<FunctionName> Log is created by this function.
<TypeValue> Type Value
FUJITSU PSWITCH
<FunctionName>: invalid ACL configuration, invalid rule count for
ACL index=<ID>, received:<CountValue>, expected:<CountValue>.
Informational
ACL component accessed invalid configuration for ACL.
<FunctionName> Log is created by this function.
<ID>
<CountValue>
ID
Count Value
<FunctionName>: invalid ACL configuration, received wrong index in ACL_CLUSTER_MSG_IE_ACL_DEF_END IE.
Informational
ACL component received wrong index in ACL_CLUSTER_MSG_IE_ACL_DEF_END IE.
<FunctionName> Log is created by this function.
<FunctionName>: invalid configuration for ACL index=<ID>, max rules per list is <MaxValue>.
Informational
ACL component accessed invalid configuration for ACL.
<FunctionName> Log is created by this function.
<ID>
<MaxValue>
ID
Maximum value
<FunctionName>: osapiMalloc failed.
Informational
ACL component osapiMalloc initial failed.
<FunctionName> Log is created by this function.
<FunctionName>: osapiMessageSend failed, queueMsg.type=<TypeValue>
746 December/2018
FUJITSU PSWITCH
Informational
ACL component sended message queue failed.
<FunctionName> Log is created by this function.
<TypeValue> Type Value
<FunctionName>: osapiMsgQueueCreate failed.
Informational
ACL component osapiMsgQueueCreate initial is failed
<FunctionName> Log is created by this function.
Message Collection
<FunctionName>: osapiTaskCreate failed.
Informational
ACL component osapiTaskCreate initial is failed.
<FunctionName> Log is created by this function.
<FunctionName>: Received invalid cluster message length, msgLength=<LengthValue>
Informational
ACL component received invalid cluster message length.
<FunctionName> Log is created by this function.
<LengthValue> ipv6 prefix length
<FunctionName>: Received invalid cluster message type, msgType=<TypeValue>
Informational
ACL component received invalid cluster message type.
<FunctionName> Log is created by this function.
<TypeValue> Type Value
<FunctionName>: received invalid memberID.
Informational
ACL component received invalid ACL rules member ID.
<FunctionName> Log is created by this function.
<FunctionName>: received invalid message, queueMsg.type=<TypeValue>
December/2018 747
Message Collection
Informational
ACL component received invalid message queue.
<FunctionName> Log is created by this function.
<TypeValue> Type Value
FUJITSU PSWITCH
<FunctionName>: received NULL cluster member ID
Informational
ACL component received NULL cluster member ID.
<FunctionName> Log is created by this function.
<FunctionName>: Received unknown clusterConfigCmd=<ClusterConfigCommandType>
Informational
ACL component received unknown commands.
<FunctionName> Log is created by this function.
<ClusterConfigCommandType> "CLUSTER_CONFIG_CMD_START_TRANSFER",
"CLUSTER_CONFIG_CMD_END_TRANSFER", ...
<FunctionName>: removed acl:<ID> from intf:<InterfaceNumber>, dir:<Direction>, ACL does not exist in received configuration.
Informational
It is success to remove ACL rules from interface.
<FunctionName> Log is created by this function.
<ID> ID
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<Direction> Direction
<FunctionName>: removed acl:<ID> from vlan:<VlanID>, dir:<Direction>, ACL does not exist in received configuration.
748 December/2018
FUJITSU PSWITCH
Informational
It is success to remove ACL rules from the VLAN.
<FunctionName> Log is created by this function.
<ID>
<VlanID>
<Direction>
ID
VLAN ID
Direction
Message Collection
<FunctionName>: removed aclId:<ID>, aclType:<TypeValue> from intf:<InterfaceNumber>, dir:<Direction>, platAclMaxRulesPerMultilistGet() exceeded.
Informational
It is success to remove ACL rules from the interface.
<FunctionName> Log is created by this function.
<ID> ID
<TypeValue> Type Value
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<Direction>
0/1, 0/0/1
Direction
<FunctionName>: removed aclId:<ID>, aclType:<TypeValue> from vlanId:<VlanID>, dir:<Direction>, platAclMaxRulesPerMultilistGet() exceeded.
Informational
It is success to remove ACL rules from the VLAN.
<FunctionName> Log is created by this function.
<ID>
<TypeValue>
<VlanID>
<Direction>
ID
Type Value
VLAN ID
Direction
<FunctionName>: Unable to allocate ACL callback info structure
Informational
Unable to allocate ACL callback info structure.
<FunctionName> Log is created by this function.
<FunctionName>: Unable to allocate ACL Change Approval callback table
December/2018 749
Message Collection
Informational
Unable to allocate ACL Change Approval callback table.
<FunctionName> Log is created by this function.
FUJITSU PSWITCH
<FunctionName>: Unable to allocate ACL Notify Event callback table
Informational
Unable to allocate ACL Notify Event callback table.
<FunctionName> Log is created by this function.
<FunctionName>: Unable to allocate ACL Route Filter callback table
Informational
Unable to allocate ACL Route Filter callback table.
<FunctionName> Log is created by this function.
<FunctionName>: unable to assign ACL rules to intf:<InterfaceNumber>, dir:<Direction>.
Informational
ACL component unable to assign ACL rules to interface.
<FunctionName> Log is created by this function.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<Direction>
0/1, 0/0/1
Direction
<FunctionName>: unable to assign ACL rules to vlanId:<VlanID>, dir:<Direction>.
Informational
ACL component unable to assign ACL rules to VLAN.
<FunctionName> Log is created by this function.
<VlanID> VLAN ID
<Direction> Direction
<FunctionName>: unexpected error, failed to add aclNum=<ID>
750 December/2018
FUJITSU PSWITCH
Informational
ACL component acccess entry failed.
<FunctionName> Log is created by this function.
<ID> ID
Message Collection
ACL <ID>: Error updating device with latest configuration
Informational
ACL error when updating ACL rules to hardware device.
<ID> ID
ACL : <AclName> is not assigned to interface
Informational
The ACL name is not assigned to interface.
<AclName> ACL name
ACL : <ID> is not assigned to interface
Informational
The ACL ID is not assigned to interface.
<ID> ID
ACL: Error writing config file <FileName>
Informational
ACL component fialed to write config file.
<FileName> Log is created by this file.
aclApplyIntfConfigData: Error activating saved config for intf
<InterfaceNumber> <Direction>
Informational
Error activating saved config for interface.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<Direction>
0/1, 0/0/1
Direction
aclIntfChangeCallback called outside permitted phase
December/2018 751
Message Collection
Informational
Process interface state changes is failed.
FUJITSU PSWITCH
aclMapVlanConfigEntryRelease called to release config entry for unconfigurable vlanNum (==<VlanID>)
Informational
It is failed when free and clear contents of a VLAN config structure.
<VlanID> VLAN ID
aclUnApplyIntfConfigData: unable to remove ACL config from intf
<InterfaceNumber> <Direction>
Informational
Unable to remove ACL config from interface.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<Direction> Direction
Data inconsistency found in config table for vlanNum <VlanID>
Informational
Data inconsistency found in config table for VLAN ID.
<VlanID> VLAN ID
Error accessing ACL config data for interface <InterfaceNumber> in aclMapIntfIsConfigurable.
Informational
Error accessing ACL config data for interface in aclMapIntfIsConfigurable.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Error activating saved config for vlanNum <VlanID> <Direction>
-- attempt to use factory defaults also failed
752 December/2018
FUJITSU PSWITCH
Informational
Message Collection
Error activating saved config for VLAN ID, and attempt to use factory defaults also failed.
<VlanID> VLAN ID
<Direction> Direction
Error activating saved config for vlanNum <VlanID> <Direction> -- using factory defaults instead
Informational
Error activating saved config for VLAN ID.
<VlanID> VLAN ID
<Direction> Direction
Error returned from acl(Mac)VlanDirectionRemove(rc=<ErrorCode>, vlanId=<VlanID>, dir=<Direction>, aclId=<ID>, aclType=<TypeValue>).
Informational
VlanDirectionRemove access failed.
<ErrorCode> Error code
<VlanID>
<Direction>
<ID>
<TypeValue>
VLAN ID
Direction
ID
Type Value
Failed NIM registration for Interface Change callback
Informational
ACL component failed NIM registration for Interface Change callback.
Failed to allocate IPv4/IPv6/MAC ACL remarks memory pool.
Informational
ACL component failed to allocate IPv4/IPv6/MAC ACL remarks memory pool.
Failed to get next free ACL sequence number. Generated sequence number exceeds the maximum sequence number value.
December/2018 753
Message Collection
Informational
FUJITSU PSWITCH
ACL sequence number exceeds the maximum sequence number value.
Failed to get next free MAC ACL sequence number. Generated sequence number exceeds the maximum sequence number value.
Informational
ACL component failed to get next free MAC ACL sequence number.
Failed to resequence ACL. Some of the new generated sequence numbers exceeds maximum sequence number value.
Informational
Failed to resequence ACL.
Invalid ACL callback registration for component <ComponentID>,
<ComponentName>
Informational
ACL component uses invalid ACL callback registration.
<ComponentID> Component ID
<ComponentName> Component name
Invalid ACL callback registration table ID <ID> for component
<ComponentID>, <ComponentName>
Informational
ACL component use invalid ACL callback registration table ID.
<ID> ID
<ComponentID> Component ID
<ComponentName> Component name
MAC ACL <AclName>: Error updating device with latest configuration
Informational
MAC ACL error when updating device with latest configuration.
<AclName> ACL name
Read lock give failure for file <FileName>:<FileLineNumber>, rc=<ErrorCode>, id=<SemaphoreID>
754 December/2018
FUJITSU PSWITCH
Informational
ACL component give give failure when read the file.
<FileName> Log is created by this file.
<FileLineNumber>
<ErrorCode>
<SemaphoreID>
Log is created by this line.
Error code
Semaphore ID
Message Collection
Read lock take failure for file <FileName>:<FileLineNumber>, rc=<ErrorCode>, id=<SemaphoreID>
Informational
ACL component take lock failure when read the file.
<FileName> Log is created by this file.
<FileLineNumber>
<ErrorCode>
<SemaphoreID>
Log is created by this line.
Error code
Semaphore ID
Removed <TypeValueName> ACL <ID> from intf <InterfaceNumber>
<Direction>, but unable to apply remaining ACLs to device
Informational
ACL error when updating ACL rules to hardware device.
<TypeValueName> "none", "mac", "ip", "ipv6"
<ID> ID
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<Direction>
0/1, 0/0/1
Direction
Removed <TypeValueName> ACL <ID> from vlan <VlanID> <Direction>, but unable to apply remaining ACLs to device
Informational
ACL error when updating ACL rules to hardware device.
<TypeValueName> "none", "mac", "ip", "ipv6"
<ID> ID
<VlanID>
<Direction>
VLAN ID
Direction
Semaphore give failure for file <FileName>:<FileLineNumber>, rc=<ErrorCode>, id=<SemaphoreID>
December/2018 755
Message Collection
Informational
ACL component semaphore give failure for the file.
<FileName> Log is created by this file.
<FileLineNumber>
<ErrorCode>
<SemaphoreID>
Log is created by this line.
Error code
Semaphore ID
FUJITSU PSWITCH
Semaphore take failure for file <FileName>:<FileLineNumber>, rc=<ErrorCode>, id=<SemaphoreID>
Informational
ACL component semaphore take failure for the file.
<FileName> Log is created by this file.
<FileLineNumber>
<ErrorCode>
<SemaphoreID>
Log is created by this line.
Error code
Semaphore ID
Unknown aclType encountered in table (aclType = <TypeValue>, vlanId=<VlanID>, dir=<Direction>, aclId=<ID>).
Informational
An unknown ACL type encountered in table.
<TypeValue> Type Value
<VlanID>
<Direction>
<ID>
VLAN ID
Direction
ID
Write lock give failure for file <FileName>:<FileLineNumber>, rc=<ErrorCode>, id=<SemaphoreID>
Informational
ACL component give give failure when write the file.
<FileName> Log is created by this file.
<FileLineNumber>
<ErrorCode>
<SemaphoreID>
Log is created by this line.
Error code
Semaphore ID
Write lock take failure for file <FileName>:<FileLineNumber>, rc=<ErrorCode>, id=<SemaphoreID>
756 December/2018
FUJITSU PSWITCH
Informational
ACL component take lock failure when write the file.
<FileName> Log is created by this file.
<FileLineNumber>
<ErrorCode>
<SemaphoreID>
Log is created by this line.
Error code
Semaphore ID
Message Collection
<FunctionName>: error logging ACL rule trap for correlator
<CorrelatorValue>. The system was unable to send an SNMP trap for this ACL rule which contains a logging attribute.
Notice
The system was unable to send an SNMP trap for this ACL.
<FunctionName> Log is created by this function.
<CorrelatorValue> TLV value for setting ACL: type/identifier/rule number/rule action
<FunctionName>: error logging ACL rule trap for correlator
<CorrelatorValue>. The system was unable to send an SNMP trap for this ACL rule which contains a logging attribute.
Notice
The system was unable to send an SNMP trap for this ACL.
<FunctionName> Log is created by this function.
<CorrelatorValue> TLV value for setting ACL: type/identifier/rule number/rule action
ACL "<AclName>" rule <AclRuleSequenceNumber>: This rule is not being logged. The ACL configuration has resulted in a requirement for more logging rules than the platform supports. The specified rule is functioning normally except for the logging action.
Notice
This rule is not being logged because exceeds platform support.
<AclName> ACL name
<AclRuleSequenceNumber> rule number
Total number of ACL rules (<CountValue>) exceeds max (<MaxValue>) on intf <InterfaceNumber> <Direction>. Applying 'deny all' rule to device. The combination of all ACLs applied to an interface has resulted in requiring more rules than the platform supports.
December/2018 757
Message Collection
Notice
FUJITSU PSWITCH
Total number of ACL rules exceeds max rules.
<CountValue> Count Value
<MaxValue> Maximum value
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<Direction>
0/1, 0/0/1
Direction
2.1.57.
QOS_COS
soc_feature reports soc_feature_color unavailable
Debug
Feature soc_feature_color is not available.
Stat collection anomaly <ErrorCode> for <InterfaceNumber>. Unable to read ingress CoS offset.
Debug
Unable to read ingress CoS offset.
<ErrorCode> Error code
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Stat collection bcmCosqDroppedPackets anomaly <ErrorCode> for
<InterfaceNumber>
Debug
Failed to get bcmCosqDroppedPackets stat.
<ErrorCode> Error code
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Stat collection bcmCosqStatRedCongestionDroppedPackets anomaly
<ErrorCode> for <InterfaceNumber>
758 December/2018
FUJITSU PSWITCH
Debug
Message Collection
Failed to get bcmCosqStatRedCongestionDroppedPackets stat.
<ErrorCode> Error code
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Stat collection bcmCosqStatRedDiscardDroppedPackets anomaly
<ErrorCode> for <InterfaceNumber>
Debug
Failed to get bcmCosqStatRedDiscardDroppedPackets stat.
<ErrorCode> Error code
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Stat collection bcmCosqStatYellowCongestionDroppedPackets anomaly <ErrorCode> for <InterfaceNumber>
Debug
Failed to get bcmCosqStatYellowCongestionDroppedPackets stat.
<ErrorCode> Error code
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Stat collection bcmCosqStatYellowDiscardDroppedPackets anomaly
<ErrorCode> for <InterfaceNumber>
Debug
Failed to get bcmCosqStatYellowDiscardDroppedPackets stat.
<ErrorCode> Error code
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Stat collection READ_MMU_CTR_COLOR_DROPm anomaly <ErrorCode> for
<InterfaceNumber>
December/2018 759
Message Collection
Debug
FUJITSU PSWITCH
Failed to get READ_MMU_CTR_COLOR_DROPm stat.
<ErrorCode> Error code
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Stat collection READ_MMU_WRED_AVG_QSIZEm anomaly <ErrorCode> on cosq <Index> for <InterfaceNumber>.
Debug
Failed to get READ_MMU_WRED_AVG_QSIZEm stat.
<ErrorCode> Error code
<Index> Index
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Stat collection READ_OP_PORT_TOTAL_COUNTr anomaly <ErrorCode> for <InterfaceNumber>
Debug
Failed to get READ_OP_PORT_TOTAL_COUNTr stat.
<ErrorCode> Error code
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Stat collection READ_OP_QUEUE_TOTAL_COUNT_CELLr anomaly
<ErrorCode> for <InterfaceNumber>
Debug
Failed to get READ_OP_QUEUE_TOTAL_COUNT_CELLr stat.
<ErrorCode> Error code
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Stat collection READ_OP_UC_QUEUE_TOTAL_COUNT_CELLr anomaly
<ErrorCode> for <InterfaceNumber>
760 December/2018
FUJITSU PSWITCH
Debug
Message Collection
Failed to get READ_OP_UC_QUEUE_TOTAL_COUNT_CELLr stat.
<ErrorCode> Error code
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Stat collection READ_PORT_COUNT_CELLr anomaly <ErrorCode> for
<InterfaceNumber>
Debug
Failed to get READ_PORT_COUNT_CELLr stat.
<ErrorCode> Error code
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Stat collection READ_PORT_WREDAVGQSIZE_CELLr anomaly <ErrorCode> for <InterfaceNumber>
Debug
Failed to get READ_PORT_WREDAVGQSIZE_CELLr stat.
<ErrorCode> Error code
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Stat collection READ_WRED_AVG_QSIZEr anomaly <ErrorCode> on cosq
<Index> for <InterfaceNumber>
Debug
Failed to get READ_WRED_AVG_QSIZEr stat.
<ErrorCode> Error code
<Index> Index
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Stat collection READ_WREDAVGQSIZE_CELLr anomaly <ErrorCode> on cosq <Index> for <InterfaceNumber>
December/2018 761
Message Collection
Debug
FUJITSU PSWITCH
Failed to get READ_WREDAVGQSIZE_CELLr stat.
<ErrorCode> Error code
<Index> Index
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Stats clear bcmCosqStatDroppedBytes anomaly <ErrorCode> for
<InterfaceNumber>
Debug
Failed to clear bcmCosqStatDroppedBytes stat.
<ErrorCode> Error code
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Stats clear bcmCosqStatDroppedPackets anomaly <ErrorCode> for
<InterfaceNumber>
Debug
Failed to clear bcmCosqStatDroppedPackets stat.
<ErrorCode> Error code
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Stats clear bcmCosqStatGreenDiscardDroppedPackets anomaly
<ErrorCode> for <InterfaceNumber>
Debug
Failed to clear bcmCosqStatGreenDiscardDroppedPackets stat.
<ErrorCode> Error code
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Stats clear bcmCosqStatRedCongestionDroppedPackets anomaly
<ErrorCode> for <InterfaceNumber>
762 December/2018
FUJITSU PSWITCH
Debug
Message Collection
Failed to clear bcmCosqStatRedCongestionDroppedPackets stat.
<ErrorCode> Error code
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Stats clear bcmCosqStatRedDiscardDroppedPackets anomaly
<ErrorCode> for <InterfaceNumber>
Debug
Failed to clear bcmCosqStatRedDiscardDroppedPackets stat.
<ErrorCode> Error code
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Stats clear bcmCosqStatYellowCongestionDroppedPackets anomaly
<ErrorCode> for <InterfaceNumber>
Debug
Failed to clear bcmCosqStatYellowCongestionDroppedPackets stat.
<ErrorCode> Error code
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Stats clear bcmCosqStatYellowDiscardDroppedPackets anomaly
<ErrorCode> for <InterfaceNumber>
Debug
Failed to clear bcmCosqStatYellowDiscardDroppedPackets stat.
<ErrorCode> Error code
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Request for WRED statistics exceeded allowed buffer (Requested
<SizeValue> > Allowed <MaxValue>)
December/2018 763
Message Collection
Error
FUJITSU PSWITCH
Request for WRED statistics exceeded allowed buffer.
<SizeValue> An integer for a specific range or a limit value.
<MaxValue> Maximum value
<FileName> <FileLineNumber>: <FunctionName>: Error initializing
COS component
Informational
Failed to initialize COS component.
<FileName> Log is created by this file.
<FileLineNumber>
<FunctionName>
Log is created by this line.
Log is created by this function.
<FileName> <FileLineNumber>: <FunctionName>: Error unconfiguring
COS phase 2
Informational
Failed to unconfigure COS phase 2.
<FileName> Log is created by this file.
<FileLineNumber> Log is created by this line.
<FunctionName> Log is created by this function.
<FunctionName>: Cannot obtain default traffic class mapping for
IP DSCP <Index>, intf <InterfaceNumber>, <InterfaceNumber>
Informational
Failed to get default traffic class mapping for IP DSCP value.
<FunctionName> Log is created by this function.
<Index> Index
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<FunctionName>: Cannot obtain default traffic class mapping for
IP Prec <Index>, intf <InterfaceNumber>, <InterfaceNumber>
764 December/2018
FUJITSU PSWITCH
Informational
Message Collection
Failed to get default traffic class mapping for IP precedence value.
<FunctionName> Log is created by this function.
<Index> Index
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<FunctionName>: Failed applying config data to interface
<InterfaceNumber>
Informational
Failed to apply config data to interface.
<FunctionName> Log is created by this function.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<FunctionName>: Failed applying COS map table config data to interface <InterfaceNumber>
Informational
Failed to apply COS map table config data to interface.
<FunctionName> Log is created by this function.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<FunctionName>: Failed applying COS queue config data to interface
<InterfaceNumber>
Informational
Failed to apply COS queue config data to interface.
<FunctionName> Log is created by this function.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<FunctionName>: Failed to apply default COS map table config to interface <InterfaceNumber>
December/2018 765
Message Collection
Informational
FUJITSU PSWITCH
Failed to apply default COS map table config to interface.
<FunctionName> Log is created by this function.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<FunctionName>: Failed to apply default COS queue config to interface <InterfaceNumber>
Informational
Failed to apply default COS queue config to interface.
<FunctionName> Log is created by this function.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<FunctionName>: Failed to restore COS factory defaults
Informational
Failed to restore COS factory defaults.
<FunctionName> Log is created by this function.
<FunctionName>: Global COS mapping table config is no longer valid, using defaults instead.
Informational
Global COS mapping table config is no longer valid, using defaults instead.
<FunctionName> Log is created by this function.
<FunctionName>: Intf <InterfaceNumber> COS map table config is no longer valid, using global defaults instead.
Informational
COS map table config is no longer valid, using global defaults instead.
<FunctionName> Log is created by this function.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<FunctionName>: Unable to apply default COS map table config to intf <InterfaceNumber>
766 December/2018
FUJITSU PSWITCH
Informational
Message Collection
Failed to apply default COS map table config to interface.
<FunctionName> Log is created by this function.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<FunctionName>: Unable to apply port default traffic class COS mapping to intf <InterfaceNumber>
Informational
Failed to apply port default traffic class COS mapping to interface.
<FunctionName> Log is created by this function.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
COS mapping: Invalid trust mode value (<CosMapInterfaceMode>) on interface <InterfaceNumber>
Informational
Invalid trust mode value on interface is used.
<CosMapInterfaceMode> "L7_QOS_COS_MAP_INTF_MODE_UNTRUSTED",
"L7_QOS_COS_MAP_INTF_MODE_TRUST_DOT1P",...
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
COS mapping: Unable to apply IP DSCP <ID> to traffic class <ID> on interface <InterfaceNumber>
Informational
Failed to apply IP DSCP to traffic class on interface.
<ID> ID
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
COS mapping: Unable to apply IP Precedence <SetValue> to traffic class <ID> on interface <InterfaceNumber>
December/2018 767
Message Collection
Informational
FUJITSU PSWITCH
Failed to apply IP Precedence to traffic class on interface.
<SetValue> Set Value
<ID> ID
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
COS mapping: Unable to apply trust mode
'<CosMapInterfaceModeName>' on interface <InterfaceNumber>
Informational
Failed to apply trust mode on interface.
<CosMapInterfaceModeName> "untrusted", "trust 802.1p", "trust ip prec", "trust ip dscp", ...
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
COS mapping: Unable to obtain dot1p mapping table for interface
<InterfaceNumber>
Informational
Failed to obtain dot1p mapping table for interface.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
CoS queue <Index> drop probability setting of
<DropProbabilityValue> fails range check
Informational
Failed to check drop probability range of CoS queue.
<Index> Index
<DropProbabilityValue> The value for drop probability setting
CoS queue <Index> max threshold setting of <ThresholdValue> fails range check
768 December/2018
FUJITSU PSWITCH
Informational
Failed to check maximum threshold range of CoS queue.
<Index> Index
<ThresholdValue> The value for general threshold setting
Message Collection
CoS queue <Index> min-threshold setting of <ThresholdValue> exceeds max-threshold
Informational
Minimum threshold exceeds maximum threshold.
<Index> Index
<ThresholdValue> The value for general threshold setting
CoS queue <Index> minimum threshold setting of <ThresholdValue> fails range check
Informational
Failed to check minimum threshold range of CoS queue.
<Index> Index
<ThresholdValue> The value for general threshold setting
CoS queue <Index> tail-drop max-threshold setting of
<ThresholdValue> fails range check
Informational
Failed to check tail-drop maximum threshold range of CoS queue.
<Index> Index
<ThresholdValue> The value for general threshold setting
COS queueing: Unable to apply COS drop parms on intf
<InterfaceNumber>
Informational
Failed to apply COS drop setting on interface.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
COS queueing: Unable to apply COS intf config on interface
<InterfaceNumber>
December/2018 769
Message Collection
Informational
FUJITSU PSWITCH
Failed to apply COS intf config on interface.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
COS queueing: Unable to apply COS scheduler config on intf
<InterfaceNumber>
Informational
Failed to apply COS scheduler config on interface.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
COS: Error writing config file <FilePath>
Informational
Failed to write config file.
<FilePath> File path
cosIntfChangeCallback called outside permitted phase
Informational
Receive interface change event outside permitted phase.
cosIntfIsConfigurable: Error accessing COS config data for interface <InterfaceNumber>
Informational
Failed to access COS config data for interface.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Enabling ECN on tail-drop CoS queue <Index> has no effect. Enable random-detect to enable ECN
Informational
Enabling ECN on tail-drop CoS queue has no effect. Enable random-detect to enable ECN.
<Index> Index
Unable to apply COS queue defaults on intf <InterfaceNumber>
770 December/2018
FUJITSU PSWITCH
Informational
Message Collection
Failed to apply COS queue defaults on interface.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Unable to get COS maximum bandwidth config from intf
<InterfaceNumber>
Informational
Failed to get COS maximum bandwidth config from interface.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Unable to get COS minimum bandwidth config from intf
<InterfaceNumber>
Informational
Failed to get COS minimum bandwidth config from interface.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Unable to get COS queue mgmt type config from intf
<InterfaceNumber>
Informational
Failed to get COS queue mgmt type config from interface.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Unable to get COS scheduler type config from intf
<InterfaceNumber>
Informational
Failed to get COS scheduler type config from interface.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Unable to get COS taildrop/WRED config from intf <InterfaceNumber>
December/2018 771
Message Collection
Informational
FUJITSU PSWITCH
Failed to get COS taildrop/WRED config from interface.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Unable to obtain COS drop parms for intf <InterfaceNumber>
Informational
Failed to obtain COS drop parms for interface.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Unable to restore global COS queue defaults on intf
<InterfaceNumber>
Informational
Failed to restore global COS queue defaults on interface.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Unable to set default IP DSCP mapping for intf <InterfaceNumber>, dscp=<Index> class=<ID>
Informational
Failed to set default IP DSCP mapping on interface.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<Index>
<ID>
Index
ID
Unable to set default IP precedence mapping for intf
<InterfaceNumber>, prec=<Index> class=<ID>
772 December/2018
FUJITSU PSWITCH
Informational
Message Collection
Failed to set default IP precedence mapping on interface.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<Index>
<ID>
0/1, 0/0/1
Index
ID
Unable to set global '<CosMapInterfaceModeName>' trust mode on intf <InterfaceNumber>
Informational
Failed to set global trust mode on interface.
<CosMapInterfaceModeName> "untrusted", "trust 802.1p", "trust ip prec", "trust ip dscp", ...
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Unable to set global COS maximum bandwidth config on intf
<InterfaceNumber>
Informational
Failed to set global COS maximum bandwidth config on interface.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Unable to set global COS minimum bandwidth config on intf
<InterfaceNumber>
Informational
Failed to set global COS minimum bandwidth config on interface.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Unable to set global COS queue mgmt type '<CosQueueMgmtType>' on intf <InterfaceNumber>
December/2018 773
Message Collection
Informational
FUJITSU PSWITCH
Failed to set global COS queue mgmt type on interface.
<CosQueueMgmtType> "rsvd", "tail", "wred", "unch", ...
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Unable to set global COS queue mgmt type on intf <InterfaceNumber>
Informational
Failed to set global COS queue mgmt type on interface.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Unable to set global COS scheduler type config on intf
<InterfaceNumber>
Informational
Failed to set global COS scheduler type config on interface.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Unable to set global COS shaping rate
(<CosQueueShapingRateValue>) on intf <InterfaceNumber>
Informational
Failed to set global COS shaping rate on interface.
<CosQueueShapingRateValue> The value for CoS queue shaping rate
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Unable to set global COS WRED decay exponent
(<CosQueueWredDecayExponentValue>) on intf <InterfaceNumber>
774 December/2018
FUJITSU PSWITCH
Informational
Message Collection
Failed to set global COS WRED decay exponent on interface.
<CosQueueWredDecayExponentValue> The exponent value for CoS queue WRED decay.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Unable to set global default IP DSCP mapping for dscp=<Index> traffic class=<ID>
Informational
Failed to set global default IP DSCP mapping.
<Index> Index
<ID> ID
Unable to set global default IP precedence mapping for prec=<Index> traffic class=<ID>
Informational
Failed to set global default IP precedence mapping.
<Index> Index
<ID> ID
Unable to set global IP DSCP mapping on intf <InterfaceNumber>
(dscp=<Index> class=<ID>)
Informational
Failed to set global IP DSCP mapping on interface.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<Index>
<ID>
0/1, 0/0/1
Index
ID
Unable to set global IP precedence mapping on intf
<InterfaceNumber> (prec=<Index> class=<ID>)
December/2018 775
Message Collection
Informational
FUJITSU PSWITCH
Failed to set global IP precedence mapping on interface.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<Index>
<ID>
0/1, 0/0/1
Index
ID
<FunctionName>: Unable to apply saved config -- using factory defaults instead. The COS component was unable to apply the saved configuration and has initialized to the factory default settings.
Notice
The COS component was unable to apply the saved configuration and has initialized to the factory default settings.
<FunctionName> Log is created by this function.
2.1.58.
QOS_DIFFSERV
<FunctionName>: Element ID <ID> received with invalid length
<LengthValue>, expected <LengthValue>.
Debug
Diddserv component received invalid element length in message.
<FunctionName> Log is created by this function.
<ID>
<LengthValue>
ID ipv6 prefix length
<FileName> <FileLineNumber>: <FunctionName>: Failed to reset
DiffServ. Recommend resetting device. While attempting to clear the running configuration an error was encountered in removing the current settings. This may lead to an inconsistent state in the system and resetting is advised.
776 December/2018
FUJITSU PSWITCH
Error
Failed to reset DiffServ.
<FileName>
<FileLineNumber>
<FunctionName>
Log is created by this file.
Log is created by this line.
Log is created by this function.
Message Collection
<FileName> <FileLineNumber>: <FunctionName> : Error on call to osapiFsWrite routine for config file <FileName>
Informational
Diffserv Writing routine for config file is failed
<FileName> Log is created by this file.
<FileLineNumber> Log is created by this line.
<FunctionName> Log is created by this function.
<FileName> <FileLineNumber>: <FunctionName> : Error while building contents of config file <FileName>
Informational
Building user config data from private MIB is failed.
<FileName> Log is created by this file.
<FileLineNumber>
<FunctionName>
Log is created by this line.
Log is created by this function.
<FileName> <FileLineNumber>: <FunctionName>: Error applying
DiffServ config
Informational
Diffserv component applied DiffServ config failed.
<FileName> Log is created by this file.
<FileLineNumber> Log is created by this line.
<FunctionName> Log is created by this function.
<FileName> <FileLineNumber>: <FunctionName>: Error initializing
DiffServ
December/2018 777
Message Collection
Informational
Error initializing DiffServ.
<FileName> Log is created by this file.
<FileLineNumber>
<FunctionName>
Log is created by this line.
Log is created by this function.
FUJITSU PSWITCH
<FileName> <FileLineNumber>: <FunctionName>: Error on not found diffserv class.
Informational
Diffserv component error because invalid parameters.
<FileName> Log is created by this file.
<FileLineNumber> Log is created by this line.
<FunctionName> Log is created by this function.
<FileName> <FileLineNumber>: <FunctionName>: Error on not found diffserv class rules.
Informational
Diffserv component error because invalid parameters.
<FileName> Log is created by this file.
<FileLineNumber>
<FunctionName>
Log is created by this line.
Log is created by this function.
<FileName> <FileLineNumber>: <FunctionName>: Error on not found diffserv policy.
Informational
Diffserv component error because invalid parameters.
<FileName> Log is created by this file.
<FileLineNumber> Log is created by this line.
<FunctionName> Log is created by this function.
<FileName> <FileLineNumber>: <FunctionName>: Error on not found diffserv policy attributes.
778 December/2018
FUJITSU PSWITCH
Informational
Diffserv component error because invalid parameters.
<FileName> Log is created by this file.
<FileLineNumber>
<FunctionName>
Log is created by this line.
Log is created by this function.
Message Collection
<FileName> <FileLineNumber>: <FunctionName>: Error on not found diffserv policy instance.
Informational
Diffserv component error because invalid parameters.
<FileName> Log is created by this file.
<FileLineNumber> Log is created by this line.
<FunctionName> Log is created by this function.
<FileName> <FileLineNumber>: <FunctionName>: Error on not found diffserv service.
Informational
Diffserv component error because invalid parameters.
<FileName> Log is created by this file.
<FileLineNumber>
<FunctionName>
Log is created by this line.
Log is created by this function.
<FileName> <FileLineNumber>: <FunctionName>: Error on not found user configuration data.
Informational
Diffserv component error because invalid parameters.
<FileName> Log is created by this file.
<FileLineNumber> Log is created by this line.
<FunctionName> Log is created by this function.
<FileName> <FileLineNumber>: <FunctionName>: Unknown Class Rule
Type (<DiffServClassRuleType>)
December/2018 779
Message Collection
Informational
FUJITSU PSWITCH
Diffserv component get a unknown class rule type.
<FileName> Log is created by this file.
<FileLineNumber>
<FunctionName>
Log is created by this line.
Log is created by this function.
<DiffServClassRuleType>
"L7_USMDB_MIB_DIFFSERV_CLASS_RULE_TYPE_(NONE/CO
S/COS2/DSTIP/DSTIPV6....)"
<FileName> <FileLineNumber>: <FunctionName>: Unknown Policy
Attribute Type (<DiffServPolicyAttributeType>)
Informational
Diffserv component get a unknown policy attribute type.
<FileName> Log is created by this file.
<FileLineNumber>
<FunctionName>
Log is created by this line.
Log is created by this function.
<DiffServPolicyAttributeType>
"L7_USMDB_MIB_DIFFSERV_POLICY_ATTR_RULE_TYPE_NO
NE",...
<FunctionName> called outside permitted phase (interface =
<InterfaceNumber>, event = <EventName>)
Informational
Diffserv component is not ready.
<FunctionName> Log is created by this function.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<EventName> Event name
<FunctionName>: <ErrorMessage>
Informational
Diffserv message queue pointer is wrong.
<FunctionName> Log is created by this function.
<ErrorMessage> Error message
<FunctionName>: build up or tear down error for policy <Index> intf
<InterfaceNumber> direction <Direction> intf <InterfaceNumber> direction <Direction>
780 December/2018
FUJITSU PSWITCH
Informational
Message Collection
Diffserv component access failed.
<FunctionName> Log is created by this function.
<Index> Index
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<Direction>
0/1, 0/0/1
Direction
<FunctionName>: clusterConfigRegister failed.
Informational
Diffserv component config register is failed.
<FunctionName> Log is created by this function.
<FunctionName>: clusterConfigRxDone failed.
Informational
Diffserv component received config failed.
<FunctionName> Log is created by this function.
<FunctionName>: clusterConfigSendDone failed
Informational
Diffserv component sent config failed.
<FunctionName> Log is created by this function.
<FunctionName>: clusterMsgRegister failed.
Informational
Diffserv component message register is failed.
<FunctionName> Log is created by this function.
<FunctionName>: could not delete attribute <Index> from policy instance <Index>,<Index>
December/2018 781
Message Collection
Informational
Diffserv component failed to access to the policy instance row.
<FunctionName> Log is created by this function.
<Index> Index
FUJITSU PSWITCH
<FunctionName>: could not delete instance <Index> from policy index <Index>
Informational
Diffserv componet failed to delete policy instance.
<FunctionName> Log is created by this function.
<Index> Index
<FunctionName>: could not delete rule <Index> from class index
<Index>
Informational
Diffserv component failed to delete the policy instance.
<FunctionName> Log is created by this function.
<Index> Index
<FunctionName>: DiffServ received config verification failed.
Informational
DiffServ received config verification failed.
<FunctionName> Log is created by this function.
<FunctionName>: Error - DiffServ cluster TX config struct not allocated.
Informational
Diffserv component TX config struct not allocated.
<FunctionName> Log is created by this function.
<FunctionName>: ERROR -- could not find policy instance row for indexes <Index>,<Index>
782 December/2018
FUJITSU PSWITCH
Informational
Diffserv could not find policy instance row for indexes.
<FunctionName> Log is created by this function.
<Index> Index
Message Collection
<FunctionName>: Error activating saved config -- using factory defaults instead
Informational
Diffserv component error activating saved config.
<FunctionName> Log is created by this function.
<FunctionName>: Error activating saved config for interface
<InterfaceNumber> -- attempt to use factory defaults also failed
Informational
Diffserv component saved config for interface failed and to use factory defaults also failed.
<FunctionName> Log is created by this function.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<FunctionName>: Error activating saved config for interface
<InterfaceNumber> -- using factory defaults instead
Informational
Diffserv component saved config for interface failed.
<FunctionName> Log is created by this function.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<FunctionName>: Error creating standard MIB AVL trees
Informational
Diffserv component error creating standard MIB AVL trees
<FunctionName> Log is created by this function.
<FunctionName>: Error creating standard MIB semaphore
December/2018 783
Message Collection
Informational
Diffserv component error creating standard MIB semaphore
<FunctionName> Log is created by this function.
FUJITSU PSWITCH
<FunctionName>: Error deleting service interface
<InterfaceNumber> <Direction>
Informational
Error deleting service diffserv from interface.
<FunctionName> Log is created by this function.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<Direction>
0/1, 0/0/1
Direction
<FunctionName>: Error during distiller processing for interface
<InterfaceNumber>, event <EventName>
Informational
Error during distiller processing for interface event.
<FunctionName> Log is created by this function.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<EventName>
0/1, 0/0/1
Event name
<FunctionName>: Error evaluating policy index <Index> (from target interface <InterfaceNumber>, event <EventName>)
Informational
Diffserv policy evaluates failed.
<FunctionName> Log is created by this function.
<Index> Index
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<EventName> Event name
<FunctionName>: Error extracting DiffServ operational config data.
784 December/2018
FUJITSU PSWITCH
Informational
Message Collection
Diffserv component extractes DiffServ operational config data failed.
<FunctionName> Log is created by this function.
<FunctionName>: Error freeing callback table semaphore
(<SemaphoreID>)
Informational
Error freeing Diffserv callback table semaphore .
<FunctionName> Log is created by this function.
<SemaphoreID> Semaphore ID
<FunctionName>: Error freeing MIB index table semaphore
(<SemaphoreID>)
Informational
Diffserv component error freeing MIB index table semaphore.
<FunctionName> Log is created by this function.
<SemaphoreID> Semaphore ID
<FunctionName>: Error freeing standard MIB index table semaphore
(<SemaphoreID>)
Informational
Diffserv component error freeing standard MIB index table semaphore
<FunctionName> Log is created by this function.
<SemaphoreID> Semaphore ID
<FunctionName>: Error mapping DiffServ service interface config.
Informational
Failed to create new service interface config from the existing config.
<FunctionName> Log is created by this function.
<FunctionName>: Error sending DiffServ <TableName> table config to peer switch <MacAddress>.
December/2018 785
Message Collection
Informational
Error sending DiffServ table config to peer switch.
<FunctionName> Log is created by this function.
<TableName>
<MacAddress>
Table name
MAC address
FUJITSU PSWITCH
<FunctionName>: Error sending DiffServ config to peer switch.
Informational
Error sending DiffServ config to peer switch.
<FunctionName> Log is created by this function.
<FunctionName>: Error sending DiffServ global config to peer switch <MacAddress>.
Informational
Error sending DiffServ global config to peer switch.
<FunctionName> Log is created by this function.
<MacAddress> MAC address
<FunctionName>: Failed clearing DiffServ config. The device may need to be reset.
Informational
Failed clearing DiffServ config.
<FunctionName> Log is created by this function.
<FunctionName>: Failed verification check for received DiffServ
<TableName> table config
Informational
Failed verification check for received DiffServ table config.
<FunctionName> Log is created by this function.
<TableName> Table name
<FunctionName>: improper msg IE sequence detected: expected
<TypeValue>, got <TypeValue>
786 December/2018
FUJITSU PSWITCH
Informational
Diffserv component check message sequence failed.
<FunctionName> Log is created by this function.
<TypeValue> Type Value
Message Collection
<FunctionName>: Improper usage for DiffServ policy delete event
Informational
Improper usage for DiffServ policy delete event.
<FunctionName> Log is created by this function.
<FunctionName>: Obsolete policy index <Index> removed from service mib index <InterfaceNumber>, dir '<Direction>'.
Informational
This policy is no longer available, and remove from interface config.
<FunctionName> Log is created by this function.
<Index> Index
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<Direction>
0/1, 0/0/1
Direction
<FunctionName>: osapiMessageSend failed, queueMsg.type=<TypeValue>
Informational
Diffserv component sent message failed.
<FunctionName> Log is created by this function.
<TypeValue> Type Value
<FunctionName>: osapiMsgQueueCreate failed.
Informational
Diffserv component message queue create failed.
<FunctionName> Log is created by this function.
<FunctionName>: osapiTaskCreate failed.
December/2018 787
Message Collection
Informational
Diffserv component task create failed.
<FunctionName> Log is created by this function.
FUJITSU PSWITCH
<FunctionName>: Received invalid cluster message length, msgLength=<LengthValue>
Informational
Diffserv component received invalid cluster message length.
<FunctionName> Log is created by this function.
<LengthValue> ipv6 prefix length
<FunctionName>: Received invalid cluster message type, msgType=<TypeValue>
Informational
Diffserv component received invalid cluster message type.
<FunctionName> Log is created by this function.
<TypeValue> Type Value
<FunctionName>: Received invalid memberID.
Informational
Diffserv component received invalid memberID.
<FunctionName> Log is created by this function.
<FunctionName>: received invalid message, queueMsg.type=<TypeValue>
Informational
Diffserv component received invalid message.
<FunctionName> Log is created by this function.
<TypeValue> Type Value
<FunctionName>: received NULL cluster member ID
788 December/2018
FUJITSU PSWITCH
Informational
Diffserv component received NULL cluster member ID.
<FunctionName> Log is created by this function.
Message Collection
<FunctionName>: Received unknown clusterConfigCmd=<ClusterConfigCommandType>
Informational
Diffserv component received unknown commands.
<FunctionName> Log is created by this function.
<ClusterConfigCommandType> "CLUSTER_CONFIG_CMD_START_TRANSFER",
"CLUSTER_CONFIG_CMD_END_TRANSFER", ...
<FunctionName>: refclass row find error for index <Index>
Informational
Diffserv component relevant refclass row find error.
<FunctionName> Log is created by this function.
<Index> Index
<FunctionName>: refclass rule row find error for indexes
<Index>,<Index>
Informational
Diffserv component relevant refclass rule row find error.
<FunctionName> Log is created by this function.
<Index> Index
<FunctionName>: relevant class row find error for index <Index>
Informational
Diffserv component relevant class row find error.
<FunctionName> Log is created by this function.
<Index> Index
<FunctionName>: relevant class rule row find error for indexes
<Index>,<Index>
December/2018 789
Message Collection
Informational
Diffserv component relevant class rule row find error.
<FunctionName> Log is created by this function.
<Index> Index
FUJITSU PSWITCH
<FunctionName>: row find error for indexes <Index>,<Index>
Informational
Diffserv component row find error for indexes.
<FunctionName> Log is created by this function.
<Index> Index
<FunctionName>: Unable to allocate DiffServ callback info structure
Informational
Unable to allocate DiffServ callback info structure.
<FunctionName> Log is created by this function.
<FunctionName>: Unable to allocate DiffServ Change Approval callback table
Informational
Unable to allocate DiffServ Change Approval callback table.
<FunctionName> Log is created by this function.
<FunctionName>: Unable to allocate DiffServ Notify Event callback table
Informational
Unable to allocate DiffServ Notify Event callback table.
<FunctionName> Log is created by this function.
<FunctionName>: Unable to allocate Distiller control memory
Informational
Unable to allocate Diffserv component control memor.
<FunctionName> Log is created by this function.
<FunctionName>: Unable to allocate memory for Tx, Rx and Tmp config structs (<SizeValue> bytes each).
790 December/2018
FUJITSU PSWITCH
Informational
Message Collection
Diffserv component unable to allocate memory for Tx, Rx and Tmp config structs.
<FunctionName> Log is created by this function.
<SizeValue> An integer for a specific range or a limit value.
<FunctionName>: Unable to create callback table semaphore
Informational
Unable to create DiffServ callback table semaphore.
<FunctionName> Log is created by this function.
<FunctionName>: Unable to create OLL AVL tree semaphore
Informational
Unable to create Diffserv component semaphore.
<FunctionName> Log is created by this function.
<FunctionName>: Unable to create private MIB AVL trees
Informational
Diffserv component unable to create private MIB AVL trees.
<FunctionName> Log is created by this function.
<FunctionName>: Unable to create private MIB index semaphore
Informational
Diffserv component unable to create private MIB index semaphore.
<FunctionName> Log is created by this function.
<FunctionName>: Unable to delete DiffServ trace buffer
Informational
Unable to delete DiffServ trace buffer.
<FunctionName> Log is created by this function.
<FunctionName>: Unable to obtain DiffServ trace buffer
December/2018 791
Message Collection
Informational
Diffserv component unable to obtain DiffServ trace buffer.
<FunctionName> Log is created by this function.
FUJITSU PSWITCH
<FunctionName>: Unconfig phase 2 function failed with resp=<CnfgrResponseType>, reas=<ErrorCode>
Informational
Unconfig diffserv component phase 2 function failed.
<FunctionName> Log is created by this function.
<CnfgrResponseType> The response type for configurator.
<ErrorCode> Error code
<FunctionName>: Unexpected error applying received DiffServ config to switch.
Informational
Diffserv component failed to apply received config to switch.
<FunctionName> Log is created by this function.
<FunctionName>: WARNING -- attempting to decrement an indexNext value of <Index> for policy instance <Index>,<Index>
Informational
Diffserv component accessed error.
<FunctionName> Log is created by this function.
<Index> Index
Corrupted contents for config file <FileName>
Informational
Diffserv component corrupted contents for config file.
<FileName> Log is created by this file.
diffServAclExtract: Unable to delete rules for class index <Index>
792 December/2018
FUJITSU PSWITCH
Informational
Diffserv component unable to delete rules for class index.
<Index> Index
Message Collection
diffServClassDelete: couldn't delete row AVL node for class
'<DiffServClassName>'
Informational
Diffserv component failed to delete the class entry.
<DiffServClassName> The name of DiffServ class
diffServClassObjectSet: attempt to destroy the row failed
Informational
Diffserv component failed to delete the internal row data.
diffServClassRuleCreate: Error deleting row after create failure for indexes <Index>,<Index>
Informational
Diffserv component failed to delete the internal row data.
<Index> Index
diffServClassRuleDelete: couldn't delete row AVL node for indexes
<Index>,<Index>
Informational
Diffserv component couldn't delete row AVL node for the index.
<Index> Index
diffServClassRuleDelete: couldn't delete row AVL node for rule
<Index> in class '<DiffServClassName>'
Informational
Diffserv component couldn't delete row AVL node for rule.
<Index> Index
<DiffServClassName> The name of DiffServ class
diffServClassRuleObjectSet: attempt to destroy the row failed
December/2018 793
Message Collection
Informational
Diffserv component failed to delete the internal row data.
FUJITSU PSWITCH
diffServPolicyAttrCreate: Error deleting row after create failure for indexes <Index>,<Index>,<Index>
Informational
Diffserv component failed to delete the internal row data.
<Index> Index
diffServPolicyAttrDelete: couldn't delete row AVL node for attribute <Index>, instance <Index>, in policy '<Index>'
Informational
Diffserv component couldn't delete row AVL node for rule.
<Index> Index
diffServPolicyAttrDelete: couldn't delete row AVL node for indexes <Index>,<Index>,<Index>
Informational
Diffserv component couldn't delete row AVL node for rule.
<Index> Index
diffServPolicyAttrObjectSet: attempt to destroy the row failed
Informational
Diffserv component failed to delete the internal row data.
diffServPolicyDelete: couldn't delete row AVL node for policy
'<PolicyName>'
Informational
Diffserv component couldn't delete row AVL node for rule.
<PolicyName> Policy name
diffServPolicyInstCreate: Error deleting row after create failure for indexes <Index>,<Index>
794 December/2018
FUJITSU PSWITCH
Informational
Diffserv could not find policy instance row for indexes.
<Index> Index
Message Collection
diffServPolicyInstDelete: couldn't delete row AVL node for indexes <Index>,<Index>
Informational
Diffserv component couldn't delete row AVL node for rule.
<Index> Index
diffServPolicyInstDelete: couldn't delete row AVL node for instance <Index>, in policy '<Index>'
Informational
Diffserv component couldn't delete row AVL node for rule.
<Index> Index
diffServPolicyInstObjectSet: attempt to destroy the row failed
Informational
Diffserv could not find policy row for indexes.
diffServPolicyObjectSet: attempt to destroy the row failed
Informational
Diffserv component failed to delete the internal row data.
diffServServiceDelete: unable to delete Policy Perf Table row for intf <InterfaceNumber> dir '<Direction>' policy index <Index>
Informational
Diffserv component unable to delete policy table row for interface.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<Direction>
<Index>
Direction
Index
diffServServiceDelete: unable to delete row AVL node for service intf <InterfaceNumber> dir '<Direction>'
December/2018 795
Message Collection
Informational
FUJITSU PSWITCH
Diffserv component couldn't create row AVL node for service interface.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<Direction>
0/1, 0/0/1
Direction
diffServServiceObjectSet: attempt to destroy the row failed
Informational
Diffserv component attempted to destroy the row failed.
diffServServiceObjectSet: unable to create Policy Perf Table row for intf <InterfaceNumber> dir '<Direction>'
Informational
Diffserv component unable to create policy table row for interface.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<Direction>
0/1, 0/0/1
Direction
diffServServiceObjectSet: unable to delete Policy Perf Table row for intf <InterfaceNumber> dir '<Direction>'
Informational
Diffserv component unable to delete policy table row for interface.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<Direction> Direction
dsDistillerInit: Key-to-index table exceeds maximum (<MaxValue>)
Informational
Diffserv component initial failed.
<MaxValue> Maximum value
dsDistillerIntfEventNotify: error (rc=<ErrorCode>) evaluating policy index <Index> intf <InterfaceNumber> direction <Direction>
796 December/2018
FUJITSU PSWITCH
Informational
Message Collection
Diffserv component evaluated possible actions failed.
<ErrorCode> Error code
<Index> Index
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<Direction>
0/1, 0/0/1
Direction
dsDistillerReset: Unable to delete TLV instances for policy
<Index>, intf <InterfaceNumber>
Informational
Unable to delete Diffserv component instances for policy.
<Index> Index
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
dsDstlTlvClassMatchInfoGet: Rule order list contains ref class for class index <Index> rule index <Index>
Informational
Diffserv component rule order list contains ref class
<Index> Index
dsDstlTlvFini: Unable to Unregister with the TLV utility, rc=<ErrorCode>
Informational
Diffserv component unable to Unregister with the TLV.
<ErrorCode> Error code
dsDstlTlvInit: Unable to register with the TLV utility, rc=<ErrorCode>
Informational
Diffserv component initial error.
<ErrorCode> Error code
dsDstlTlvPolicyAddCombined: Could not delete TLV for handle
<TlvHandleValue>
December/2018 797
Message Collection
Informational
Diffserv component failed to free the TLV resource.
<TlvHandleValue> Type value for tlv block handle
FUJITSU PSWITCH
dsDstlTlvPolicyAddCombined: TLVs issued, but could not update TLV issued flags for policy <Index>, interface <InterfaceNumber>, ifIndex <InterfaceNumber>
Informational
Diffserv component accessed TLV error.
<Index> Index
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
dsDstlTlvPolicyAddSeparate: Could not delete TLV for handle
<TlvHandleValue>
Informational
Diffserv component failed to free the TLV resource.
<TlvHandleValue> Type value for tlv block handle
dsDstlTlvPolicyAddSeparate: TLV issued, but could not update TLV issued flags for policy <Index>, intf <InterfaceNumber>, ifIndex
<InterfaceNumber>
Informational
Diffserv component TLS issued error.
<Index> Index
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
dsDstlTlvPolicyDel: Could not delete TLV for handle
<TlvHandleValue>
Informational
Diffserv component failed to delete the TLV entry.
<TlvHandleValue> Type value for tlv block handle
dsDstlTlvPolicyDel: DiffServ deletion TLV failure for interface
<InterfaceNumber> <Direction>, key count <CountValue>
798 December/2018
FUJITSU PSWITCH
Informational
Message Collection
Diffserv component failed to delete the TLV entry.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<Direction>
<CountValue>
0/1, 0/0/1
Direction
Count Value
dsDstlTlvPolicyDel: Intf node ptr changed unexpectedly from
<MemoryAddress> to <MemoryAddress>
Informational
interface node pointer changed failed.
<MemoryAddress> Memory address
dsDstlTlvPolicyDel: Key to Inst translation got policy index
<Index> expected <Index>
Informational
Diffserv component accessed TLV error.
<Index> Index
dsmibClassRuleAclDelete: Could not delete rule <Index> from class
'<DiffServClassName>'
Informational
Diffserv component could not delete rule from class.
<Index> Index
<DiffServClassName> The name of DiffServ class
dsmibClassRuleIndexNextUndo: ERROR -- could not find class row for index <Index>
Informational
Diffserv component could not find class row for index.
<Index> Index
dsmibClassRuleIndexNextUndo: WARNING -- attempting to decrement an indexNext value of <Index> for class <Index>
December/2018 799
Message Collection
Informational
Diffserv component accessed error.
<Index> Index
FUJITSU PSWITCH
dsmibClassRuleIndexNextUpdate: ERROR -- could not find class row for index <Index>
Informational
Diffserv component could not find class row for index.
<Index> Index
dsmibMibTableSizeCheck: table ID <ID> size <SizeValue> exceeds maximum <MaxValue>
Informational
Diffserv component mib size check is failed.
<ID> ID
<SizeValue>
<MaxValue>
An integer for a specific range or a limit value.
Maximum value
dsmibPolicyAttrIndexNextUpdate: ERROR -- could not find policy instance row for indexes <Index>,<Index>
Informational
Diffserv could not find policy instance row for indexes.
<Index> Index
dsmibPolicyInstIndexNextUndo: ERROR -- could not find policy row for index <Index>
Informational
Diffserv could not find policy row for indexes.
<Index> Index
dsmibPolicyInstIndexNextUndo: WARNING -- attempting to decrement an indexNext value of <Index> for policy <Index>,<Index>
800 December/2018
FUJITSU PSWITCH
Informational
Diffserv component accessed error.
<Index> Index
Message Collection
dsmibPolicyInstIndexNextUpdate: ERROR -- could not find policy row for index <Index>
Informational
Diffserv could not find policy row for indexes.
<Index> Index
dsmibPolicyPerfAttach: couldn't create Perf <Direction> row for indexes <Index>,<Index> on interface <InterfaceNumber>
Informational
Diffserv component couldn't create row AVL node for rule.
<Direction> Direction
<Index> Index
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
dsmibPolicyPerfDetach: couldn't delete Perf <Direction> row for indexes <Index>,<Index> on interface <InterfaceNumber>
Informational
Diffserv component couldn't create row AVL node for rule.
<Direction> Direction
<Index> Index
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
dsmibPolicyPerfInDelete: couldn't delete row AVL node for Policy
Perf In Table indexes (<Index>,<Index>), interface
<InterfaceNumber>
December/2018 801
Message Collection
Informational
FUJITSU PSWITCH
Diffserv component couldn't delete row AVL node for rule.
<Index> Index
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
dsmibPolicyPerfOutDelete: couldn't delete row AVL node for Policy
Perf In Table indexes (<Index>,<Index>), interface
<InterfaceNumber>
Informational
Diffserv component couldn't delete row AVL node for rule.
<Index> Index
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
dsTlvDebugGetTlv: Could not delete TLV for handle
<TlvHandleValue>
Informational
Diffserv component failed to delete the TLV entry.
<TlvHandleValue> Type value for tlv block handle
Error accessing DIFFSERV config data for interface
<InterfaceNumber> in diffServMapIntfIsConfigurable.
Informational
Error accessing DIFFSERV config data for interface.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Inconsistent row status for intf <InterfaceNumber> <Direction>: expected=<DiffServRowStatus>, actual=<DiffServRowStatus>
802 December/2018
FUJITSU PSWITCH
Informational
Message Collection
Diffserv component inconsistent row status for intf.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<Direction>
<DiffServRowStatus>
0/1, 0/0/1
Direction
"L7_USMDB_MIB_DIFFSERV_ROW_STATUS_(NONE/ACTIVE/
NOT_IN_SERVICE...)"
Inconsistent row status value: expected=<DiffServRowStatus>, actual=<DiffServRowStatus>
Informational
Diffserv component access mib failed.
<DiffServRowStatus>
"L7_USMDB_MIB_DIFFSERV_ROW_STATUS_(NONE/ACTIVE/
NOT_IN_SERVICE...)"
Invalid DiffServ callback de-registration for table ID <ID>
Informational
Invalid DiffServ callback de-registration for the table ID.
<ID> ID
Invalid DiffServ callback registration for component
<ComponentID>, <ComponentName>
Informational
Invalid DiffServ callback registration for component.
<ComponentID> Component ID
<ComponentName> Component name
Invalid DiffServ callback registration table ID <ID> for component
<ComponentID>, <ComponentName>
December/2018 803
Message Collection
Informational
Invalid DiffServ callback registration table.
<ID> ID
<ComponentID> Component ID
<ComponentName> Component name
FUJITSU PSWITCH
Number of fields in ACL rule exceeds DiffServ rules per class limit
(<MaxValue>)
Informational
Number of fields in ACL rule exceeds DiffServ rules per class limit.
<MaxValue> Maximum value
Semaphore give failure for file <FileName>:<FileLineNumber>, rc=<ErrorCode>, id=<SemaphoreID>
Informational
Diffserv component Semaphore give failure
<FileName> Log is created by this file.
<FileLineNumber>
<ErrorCode>
<SemaphoreID>
Log is created by this line.
Error code
Semaphore ID
Semaphore take failure for file <FileName>:<FileLineNumber>, rc=<ErrorCode>, id=<SemaphoreID>
Informational
Diffserv component semaphore take failure.
<FileName> Log is created by this file.
<FileLineNumber>
<ErrorCode>
<SemaphoreID>
Log is created by this line.
Error code
Semaphore ID
WARNING: Invalid build - QOS DiffServ component not initialized
804 December/2018
FUJITSU PSWITCH
Informational
QOS DiffServ component not initialized.
Message Collection
Policy invalid for service intf: policy '<PolicyName>' interface
<InterfaceNumber> direction <Direction>. The DiffServ policy definition is not compatible with the capabilities of the interface specified. Check the platform release notes for information on configuration limitations.
Notice
Diffserv policy invalid for service interface.
<PolicyName> Policy name
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<Direction>
0/1, 0/0/1
Direction
2.1.59.
RADIUS
RADIUS: radiusAccessRequestMsgSend(): Server index <Index>
Debug
Show server index.
<Index> Index
RADIUS: radiusAccountingNamedStart(): Could not get at least one named Server'
Debug
Failed to obtain server information.
RADIUS: radiusUserAuthenticateMsg(): Server index <Index>
Debug
Show server index.
<Index> Index
No radius Accounting server entries
December/2018 805
Message Collection
Informational
No radius Accounting server entries.
FUJITSU PSWITCH
RADIUS: radiusAcctServerPortNumGet(): Invalid parameters
Informational
Invalid parameters.
<FunctionName>(): Could not allocate requestInfo
Informational
Failed to allocate a request buffer.
<FunctionName> Log is created by this function.
<FunctionName>(): dns resolution is not successful for server:
<HostName> !
Informational
RADIUS failed to do dns resolution for RADIUS server.
<FunctionName> Log is created by this function.
<HostName> Host name
<FunctionName>(): DNS server not found!
Informational
DNS server not found.
<FunctionName> Log is created by this function.
<FunctionName>(): Failed to get lock
Informational
Failed to take semaphore.
<FunctionName> Log is created by this function.
<FunctionName>(): Failed to open.
806 December/2018
FUJITSU PSWITCH
Informational
Failed to open socket.
<FunctionName> Log is created by this function.
<FunctionName>(): Invalid parameters
Informational
Invalid parameters.
<FunctionName> Log is created by this function.
<FunctionName>(): Invalid parameters!
Informational
Radius component received an invalid parameters.
<FunctionName> Log is created by this function.
Message Collection
<FunctionName>(): Named radius server:<ServerName> not found!
Informational
Failed to obtain server information.
<FunctionName> Log is created by this function.
<ServerName> Server name
<FunctionName>(): Request not found for the response! Dropped the packet with ID:<ID>.
Informational
RADIUS request not found for the response.
<FunctionName> Log is created by this function.
<ID> ID
<FunctionName>: Failed to receive on socket: <ID> bound on Local
IP: <IPAddress>, closing socket
Informational
RADIUS component failed to receive data on specified socket.
<FunctionName> Log is created by this function.
<ID>
<IPAddress>
ID ip_address, or, ipv6_address, or hostname
<FunctionName>: message send failed!
December/2018 807
Message Collection
Informational
RADIUS component Message send failed.
<FunctionName> Log is created by this function.
FUJITSU PSWITCH
<FunctionName>: msg send failed to radiusClusteringQueue!
Informational
Msg send failed to radius queue.
<FunctionName> Log is created by this function.
<FunctionName>: unknown command <Command>
Informational
Validating received radius configuration frim cluster member is failed.
<FunctionName> Log is created by this function.
<Command> Command
Accounting Server Name Get Failed!
Informational
Accounting Server Name Get Failed.
Accounting Server Port Get Failed!
Informational
Accounting Server Port Get Failed.
Accounting Server Priority Get Failed!
Informational
Accounting Server Priority Get Failed.
Accounting Server secret Get Failed!
Informational
Accounting Server secret Get Failed.
Accounting Server Type Get Failed!
808 December/2018
FUJITSU PSWITCH
Informational
Accounting Server Type Get Failed.
Message Collection
Authentication Server Message Authentication Mode Get Failed!
Informational
Authentication Server Message Authentication Mode Get Failed.
Authentication Server Message Usage Type Get Failed!
Informational
Authentication Server Message Usage Type Get Failed.
Authentication Server Name Get Failed!
Informational
Authentication Server Name Get Failed.
Authentication Server Port Get Failed!
Informational
Authentication Server Port Get Failed.
Authentication Server Priority Get Failed!
Informational
Authentication Server Priority Get Failed.
Authentication Server secret Get Failed!
Informational
Authentication Server secret Get Failed.
Authentication Server Type Get Failed!
Informational
Authentication Server Type Get Failed.
Cannot add new RADIUS server <HostName> of type <SetValue>.
December/2018 809
Message Collection
Informational
Cannot add new RADIUS server.
<HostName> Host name
<SetValue> Set Value
FUJITSU PSWITCH
cluster Memeber ID is NULL!
Informational
RADIUS component cluster Memeber ID is NULL.
Cluster message is NULL!
Informational
Cluster message is NULL.
Cluster Message send failed to member ID = <MacAddress>
Informational
RADIUS component cluster Message send failed to member
<MacAddress> MAC address
Cluster Message send failed to member ID = <MacAddress> line
<FileLineNumber>
Informational
RADIUS component cluster Message send failed to member ID.
<MacAddress> MAC address
<FileLineNumber> Log is created by this line.
Dead time Parameter Get Failed!
Informational
Dead time Parameter Get Failed.
Failed to add Accounting server to Db.
Informational
Failed to add Accounting server to database.
Failed to add Authentication server to Db.
810 December/2018
FUJITSU PSWITCH
Informational
Failed to add Authentication server to database.
Failed to add Dead Time per server to Db.
Informational
Failed to add Dead Time per server to database.
Failed to add Timeout per server to Db.
Informational
Failed to add Timeout per server to database.
Message Collection
Failed to parse RADIUS Client Configuration message.
Informational
Failed to parse RADIUS Client Configuration message.
Failed to set Auth Usage Type
Informational
Failed to set Auth Usage Type.
Failed to set Max Retrans per server to Db.
Informational
Failed to set Max Retrans per server to database.
Failed to set Msg. Auth Mode.
Informational
Failed to set Msg. Auth Mode.
Failed to set RADIUS Accounting Admin Mode.
Informational
Failed to set RADIUS Accounting Admin Mode.
Failed to set RADIUS Acct Port.
December/2018 811
Message Collection
Informational
Failed to set RADIUS Acct Port.
Failed to set RADIUS Acct Secret.
Informational
Failed to set RADIUS Acct Secret.
Failed to set RADIUS Auth Port.
Informational
Failed to set RADIUS Auth Port.
FUJITSU PSWITCH
Failed to set RADIUS Auth Secret.
Informational
Failed to set RADIUS Auth Secret.
Failed to set RADIUS DeadTime Duration.
Informational
Failed to set RADIUS DeadTime Duration.
Failed to set RADIUS Max. Number of retransmissions.
Informational
Failed to set RADIUS Maximum Number of retransmissions.
Failed to set RADIUS NAS IP Address and Mode.
Informational
Failed to set RADIUS NAS IP Address and Mode.
Failed to set RADIUS Server Priority Type.
Informational
Failed to set RADIUS Server Priority Type.
Failed to set RADIUS Server Type.
812 December/2018
FUJITSU PSWITCH
Informational
Failed to set RADIUS Server Type.
Failed to set RADIUS Timeout Duration.
Informational
Failed to set RADIUS Timeout Duration.
Failed to set Source Interafce and Mode.
Informational
Failed to set Source Interafce and Mode.
Failed to set Source Interface and Mode.
Informational
Failed to set Source Interface and Mode.
Failed to set Source IP Address and Mode.
Informational
Failed to set Source IP Address and Mode.
Failed to Source IP per server to Db.
Informational
Failed to Source IP per server to database.
Invalid element <ID> received in the message.
Informational
Recevied unexpected element in message.
<ID> ID
Message Collection
Invalid IP Address format received. Expecting IPv4 only addresses.
Informational
Recevied unexpected IP Address format.
Invalid state <RadiusState> for RX ending
December/2018 813
Message Collection
Informational
FUJITSU PSWITCH
Invalid state for RX ending.
<RadiusState> RADIUS_CLUSTER_WAIT_STATE,
RADIUS_CLUSTER_CFG_TX_STATE,
RADIUS_CLUSTER_CFG_RX_START_STATE, ...
Invalid state <RadiusState> to apply data.
Informational
Invalid state to apply data.
<RadiusState> RADIUS_CLUSTER_WAIT_STATE,
RADIUS_CLUSTER_CFG_TX_STATE,
RADIUS_CLUSTER_CFG_RX_START_STATE, ...
Invalid state <RadiusState> to handle RX Abort message.
Informational
Invalid state to handle RX Abort message.
<RadiusState> RADIUS_CLUSTER_WAIT_STATE,
RADIUS_CLUSTER_CFG_TX_STATE,
RADIUS_CLUSTER_CFG_RX_START_STATE, ...
Invalid state <RadiusState> to RX cluster config.
Informational
Invalid state to RX cluster config.
<RadiusState> RADIUS_CLUSTER_WAIT_STATE,
RADIUS_CLUSTER_CFG_TX_STATE,
RADIUS_CLUSTER_CFG_RX_START_STATE, ...
Invalid state <RadiusState> to send cluster config.
Informational
Invalid state to send cluster config.
<RadiusState> RADIUS_CLUSTER_WAIT_STATE,
RADIUS_CLUSTER_CFG_TX_STATE,
RADIUS_CLUSTER_CFG_RX_START_STATE, ...
Invalid state <RadiusState>, to hanlde msg <ID> dropping message.
814 December/2018
FUJITSU PSWITCH
Informational
Message Collection
Invalid state to hanlde message.
<RadiusState> RADIUS_CLUSTER_WAIT_STATE,
<ID>
RADIUS_CLUSTER_CFG_TX_STATE,
RADIUS_CLUSTER_CFG_RX_START_STATE, ...
ID
Local Config Mask Get Failed!
Informational
Local Config Mask Get Failed.
Max Number of retransmissions Get Failed!
Informational
Max Number of retransmissions Get Failed.
No radius Accounting server entries
Informational
No radius Accounting server entries.
Packet received in invalid state <RadiusState>.
Informational
Packet is received in invalid state.
<RadiusState> RADIUS_CLUSTER_WAIT_STATE,
RADIUS_CLUSTER_CFG_TX_STATE,
RADIUS_CLUSTER_CFG_RX_START_STATE, ...
RADIUS (): request is dropped as it has no reference to current server
Informational
Request is dropped as it has no reference to current server.
RADIUS (): request is dropped as it has no reference to global server
December/2018 815
Message Collection
Informational
Request is dropped as it has no reference to global server.
FUJITSU PSWITCH
RADIUS Client module received unknown clustering configuration message.
Informational
RADIUS Client module received unknown clustering configuration message.
RADIUS(): radiusHostNameServerEntryTypeSet() <IPAddress> :
Invalid parameters
Informational
Invalid parameters.
<IPAddress> ip_address, or, ipv6_address, or hostname
RADIUS(): radiusHostNameServerEntryTypeSet() : Specified Server
Not found
Informational
Failed to obtain server information.
RADIUS(TypeSet): <FunctionName> : Invalid inputs
Informational
RADIUS conponent received invalid inputs.
<FunctionName> Log is created by this function.
RADIUS(TypeSet): <FunctionName> : Specified Server Not Found
Informational
RADIUS specified server entry not found.
<FunctionName> Log is created by this function.
RADIUS: <FunctionName> Invalid Parameters
816 December/2018
FUJITSU PSWITCH
Informational
Invalid parameters.
<FunctionName>
Message Collection
Log is created by this function.
RADIUS: <FunctionName>() : Failed to fetch Existing Primary SErver
Informational
Failed to fetch Existing Primary RADIUS server.
<FunctionName> Log is created by this function.
RADIUS: <FunctionName>() Failed to select the new Acct. current server
Informational
RADIUS failed to select the new acct.
<FunctionName> Log is created by this function.
RADIUS: <FunctionName>(): Bind error
Informational
RADIUS component failed to bind socket.
<FunctionName> Log is created by this function.
RADIUS: <FunctionName>(): Could not find the ipAddr for specified socket : <ID>
Informational
Could not find the IP address for specified socket.
<FunctionName> Log is created by this function.
<ID> ID
RADIUS: <FunctionName>(): Could not get current server!
Informational
Failed to obtain server information.
<FunctionName> Log is created by this function.
RADIUS: <FunctionName>(): Failed remove the server name from the server entry
December/2018 817
Message Collection
Informational
Failed remove the server name from the server entry.
<FunctionName> Log is created by this function.
FUJITSU PSWITCH
RADIUS: <FunctionName>(): Failed to create socket
Informational
RADIUS component failed to create socket.
<FunctionName> Log is created by this function.
RADIUS: <FunctionName>(): Failed to get current Auth. server from the indexed group
Informational
Failed to get current Auth. server from the indexed group.
<FunctionName> Log is created by this function.
RADIUS: <FunctionName>(): Failed to open.
Informational
Failed to open socket.
<FunctionName> Log is created by this function.
RADIUS: <FunctionName>(): Invalid parameters
Informational
Invalid parameters.
<FunctionName> Log is created by this function.
RADIUS: <FunctionName>(): Invalid parameters!
Informational
Invalid parameters.
<FunctionName> Log is created by this function.
RADIUS: <FunctionName>(): Invalid parameters.
818 December/2018
FUJITSU PSWITCH
Informational
Invalid parameters.
<FunctionName>
Message Collection
Log is created by this function.
RADIUS: <FunctionName>(): Invalid servernameIndex: <Index>
Informational
Invalid RADIUS server name index.
<FunctionName> Log is created by this function.
<Index> Index
RADIUS: <FunctionName>(): Name already in use.!
Informational
Server name already in use.
<FunctionName> Log is created by this function.
RADIUS: <FunctionName>(): No room for socket in data base.
Informational
No room for socket in data base.
<FunctionName> Log is created by this function.
RADIUS: <FunctionName>(): No server found with this name!
Informational
Failed to find server with specific name.
<FunctionName> Log is created by this function.
RADIUS: (): Failed to process received packet
Informational
RADIUS component failed to process received packet.
RADIUS: (): packet receive failed with other status.
Informational
RADIUS component failed to received.
RADIUS: Access-Reject failed validation, id=<ID>
December/2018 819
Message Collection
Informational
Failed to validate Access-Reject.
<ID> ID
FUJITSU PSWITCH
RADIUS: ATTRIBUTE entry invalid on line (<FileLineNumber>) in dictionary
Informational
Failed to accesse RADIUS ATTRIBUTE.
<FileLineNumber> Log is created by this line.
RADIUS: Attribute name is too long on line (<FileLineNumber>) in dictionary
Informational
Failed to accesse RADIUS ATTRIBUTE, because Attribute name is too long.
<FileLineNumber> Log is created by this line.
RADIUS: Attribute type is invalid on line (<FileLineNumber>) in dictionary
Informational
Failed to accesse RADIUS ATTRIBUTE, because Attribute type is invalid.
<FileLineNumber> Log is created by this line.
RADIUS: Bind error
Informational
RADIUS component failed to bind socket.
RADIUS: Could not allocate a buffer for the packet
Informational
RADIUS component could not allocate a buffer for the packet.
RADIUS: Could not allocate a buffer to receive on Intf Socket
820 December/2018
FUJITSU PSWITCH
Informational
Message Collection
RADIUS component could not allocate a buffer for the interface socket.
RADIUS: Could not allocate a request buffer
Informational
Failed to allocate a request buffer.
RADIUS: could not get buffer
Informational
Failed to get buffer.
RADIUS: could not save config file <FileName>
Informational
Failed to save config file.
<FileName> Log is created by this file.
RADIUS: Failed to decrypt MPPE key
Informational
Failed to decrypt MPPE key.
RADIUS: Failed to initialize the dictionary
Informational
Failed to initialize the dictionary.
RADIUS: Invalid code - <ErrorCode>
Informational
Radius component received invalid packets header code.
<ErrorCode> Error code
RADIUS: Invalid event received
December/2018 821
Message Collection
Informational
RADIUS invalid event received.
RADIUS: Invalid ms key len
Informational
Invalid key length.
RADIUS: Invalid Parameters!
Informational
RADIUS component received invalid parameters.
RADIUS: MS attribute type =<TypeValue>
Informational
Show MS attribute type.
<TypeValue> Type Value
FUJITSU PSWITCH
RADIUS: radiusAccessRequestMsgSend(): Updated Global radius server entry with ipaddr <IPAddress>'
Informational
Updated global radius server entry with ip address.
<IPAddress> ip_address, or, ipv6_address, or hostname
RADIUS: radiusAccessRequestMsgSend(): Could not get atleast one named Server'
Informational
Failed to obtain server information.
RADIUS: radiusAccessRequestMsgSend(): Failed to open.
Informational
Failed to open socket.
RADIUS: radiusAccessRequestNamedSend(): Invalid Parameters.
822 December/2018
FUJITSU PSWITCH
Informational
Invalid parameters.
Message Collection
RADIUS: radiusAccountingMsgStart(): Failed to open.
Informational
Failed to open socket.
RADIUS: radiusAccountingMsgStart(): Invalid parameters
Informational
Invalid parameters.
RADIUS: radiusAccountingMsgStop(): Failed to get lock
Informational
Failed to take semaphore.
RADIUS: radiusAccountingMsgStop(): Invalid parameters
Informational
Invalid parameters.
RADIUS: radiusAccountingNamedStart(): Could not get the
'<ServerName>'
Informational
Failed to obtain server information.
<ServerName> Server name
RADIUS: radiusAccountingNamedStart(): Failed to get lock
Informational
Failed to take semaphore.
RADIUS: radiusAccountingNamedStop(): Could not get at least one named Server'
December/2018 823
Message Collection
Informational
Failed to obtain server information.
FUJITSU PSWITCH
RADIUS: radiusAccountingNamedStop(): Could not get the 'Default
RADIUS Acct. Server'
Informational
Failed to obtain server information.
RADIUS: radiusAcctServerNameAdd(): All of the name entries are configured. There can't be more than <MaxValue>
Informational
RADIUS Server excessed max numbers.
<MaxValue> Maximum value
RADIUS: radiusAcctServerNameEntryGet(): No RADIUS Acct. server configured with this name
Informational
No RADIUS Acct. server configured with this name.
RADIUS: radiusAuthServerNameSet(): Failed to detach the server from current group
Informational
Failed to detach the server from current group.
RADIUS: radiusAuthServerNameSet(): Failed to select the new current Auth. server
Informational
Failed to select the new current authentication server.
RADIUS: radiusAuthServerNameSet(): Failed to set the name to the server
824 December/2018
FUJITSU PSWITCH
Informational
Failed to set the name to the server.
Message Collection
RADIUS: radiusAuthServerNameSet(): Trying to set the same name to server
Informational
Trying to set the same name to RADIUS server.
RADIUS: radiusClientShutdown(): Failed remove the server name from the server entry
Informational
Failed remove the RADIUS server name from the server entry.
RADIUS: radiusDictionaryInit() could not allocate memory
Informational
RADIUS component could not allocate memory.
RADIUS: radiusEventAllServerRemove(): Failed to delete the server entry
Informational
RADIUS failed to delete the server entry.
RADIUS: radiusEventDeadtimeSet(): server entry not found
Informational
RADIUS server entry not found.
RADIUS: radiusEventMaxNoOfRetransSet(): server entry not found
Informational
RADIUS server entry not found.
RADIUS: radiusEventServerHostNameAdd(): Failed to set the name to the server
December/2018 825
Message Collection
Informational
RADIUS failed to set server name.
FUJITSU PSWITCH
RADIUS: radiusEventServerHostNameRemove(): Failed to delete the server entry
Informational
RADIUS failed to delete the server entry.
RADIUS: radiusEventServerSharedSecretSet(): server entry not found
Informational
RADIUS server entry not found.
RADIUS: radiusEventSourceInterfaceSet(): Invlaid Inputs
Informational
RADIUS component received invalid parameters.
RADIUS: radiusEventSourceIPSet(): server entry not found
Informational
RADIUS server entry not found.
RADIUS: radiusEventTimeOutDurationSet(): server entry not found
Informational
RADIUS failed to set server name.
RADIUS: radiusNwInterfaceSocketTimeStampPut(): Could not find the ipAddr for specified socket : <ID>
Informational
Could not find the IP address for specified socket.
<ID> ID
RADIUS: radiusRequestInfoProcess(): Could not successfully process the request
826 December/2018
FUJITSU PSWITCH
Informational
Could not successfully process the request.
Message Collection
RADIUS: radiusResponsePacketProcess: Server not found with given
IP address.
Informational
RADIUS server not found with given IP address.
RADIUS: radiusServerAcctNameSet(): Invalid Parameters
Informational
Invalid parameters.
RADIUS: radiusServerAcctNameSet(): Name already in use.
Informational
Server name already in use.
RADIUS: radiusServerAuthCurrentEntrySet(): Invalid usageType
Informational
RADIUS component received invalid usage type.
RADIUS: radiusServerAuthNameSet(): Invalid Parameters
Informational
Invalid parameters.
RADIUS: radiusServerAuthNameSet(): The specified server:
<IPAddress> of type: <TypeValue> desn't exist
Informational
Failed to obtain server information.
<IPAddress> ip_address, or, ipv6_address, or hostname
<TypeValue> Type Value
RADIUS: radiusServerEntryDelete(): Failed remove the server name from the Account server entry
December/2018 827
Message Collection
Informational
Failed remove the server name from the Account server entry.
FUJITSU PSWITCH
RADIUS: radiusServerEntryDelete(): Failed to delete server
Informational
Failed to delete RADIUS server.
RADIUS: radiusServerhostIndexGet(): Invalid parameters!
Informational
Failed to accesse RADIUS component, because of invalid parameters.
RADIUS: radiusServerHostNameGet() Invalid Parameters
Informational
Invalid parameters.
RADIUS: radiusServerSelect(): Inavalid servernameIndex: <Index>
Informational
RADIUS conponent accessed inavalid server name index.
<Index> Index
RADIUS: radiusUserAuthenticate(): Failed to get lock
Informational
Failed to take semaphore.
RADIUS: radiusUserAuthenticate(): Invalid parameters.
Informational
Invalid parameters.
RADIUS: radiusUserAuthenticateMsg(): Updated Global radius server entry with ipaddr <IPAddress>'
828 December/2018
FUJITSU PSWITCH
Informational
Message Collection
Updated global radius server entry with ip address.
<IPAddress> ip_address, or, ipv6_address, or hostname
RADIUS: radiusUserAuthenticateMsg(): Could not get at least one named Server'
Informational
Failed to obtain server information.
RADIUS: radiusUserAuthenticateMsg(): Could not get the named
<ServerName> Server'
Informational
Failed to obtain server information.
<ServerName> Server name
RADIUS: Registrar ID <ComponentID> greater then last component ID
Informational
Invalid registrar id.
<ComponentID> Component ID
RADIUS: Registrar ID <ComponentID>, <RegisterName> already registered
Informational
Registrar id already registered.
<ComponentID> Component ID
<RegisterName> Chip layer register name
RADIUS: Unable to register for response callback
Informational
Unable to register RADIUS call back function.
RADIUS: Unknown message event <EventID>
December/2018 829
Message Collection
Informational
RADIUS unknown message event.
<EventID> Event ID
FUJITSU PSWITCH
RADIUS: VALUE entry invalid on line (<FileLineNumber>) in dictionary
Informational
Failed to accesse RADIUS ATTRIBUTE, because VALUE entry is invalid.
<FileLineNumber> Log is created by this line.
RADIUS: Value name is too long on line (<FileLineNumber>) in dictionary
Informational
Failed to accesse RADIUS ATTRIBUTE, because Value name is too long.
<FileLineNumber> Log is created by this line.
RADIUS: VENDOR entry invalid on line (<FileLineNumber>) in dictionary
Informational
Failed to accesse RADIUS ATTRIBUTE, because VENDOR entry is invalid.
<FileLineNumber> Log is created by this line.
RADIUS: Vendor name is too long on line (<FileLineNumber>) in dictionary
Informational
Failed to accesse RADIUS ATTRIBUTE, because Vendor name is too long.
<FileLineNumber> Log is created by this line.
RADIUS: Vendor name is too long on line (<FileLineNumber>) in
RADIUS dictionary
Informational
Failed to accesse RADIUS ATTRIBUTE, because Vendor name is too long.
<FileLineNumber> Log is created by this line.
RADIUS:<FunctionName> Not found the server entry for the host:
<IPAddress>
830 December/2018
FUJITSU PSWITCH
Informational
Message Collection
Failed to obtain server information.
<FunctionName> Log is created by this function.
<IPAddress> ip_address, or, ipv6_address, or hostname
RADIUS:radiusServerHostNameGet(): Not found the server entry for the host: <IPAddress>
Informational
Failed to obtain server information.
<IPAddress> ip_address, or, ipv6_address, or hostname
RADIUS_CLUSTER: Cluster component present.
Informational
RADIUS Cluster component present.
RADIUS_CLUSTER: Could not register event notification callback!!
Informational
Could not register event notification callback.
RADIUS_CLUSTER: Couldn't register cfg callbacks!
Informational
RADIUS Couldn't register cfg callbacks.
RADIUS_CLUSTER: Register radius config message with cluster failed.
Informational
Register radius config message with cluster failed
radiusHostNameServerSharedSecretGet(): Failed to find server
Informational
Failed to obtain server information.
radiusHostNameServerSharedSecretKeyTypeGet(): Failed to find server
December/2018 831
Message Collection
Informational
Failed to obtain server information.
FUJITSU PSWITCH
radiusLocalConfigMaskGet(): Failed to find server
Informational
Failed to obtain server information.
radiusMaxNoOfRetransGet(): Failed to find server
Informational
Failed to obtain server information.
radiusResponseDeregister registrar_ID <ComponentID> greater than
L7_LAST_COMPONENT_ID
Informational
Invalid registrar id.
<ComponentID> Component ID
radiusResponseDeregister registrar_ID <ComponentID>,
<RegisterName> not registered
Informational
Registrar id is not registered.
<ComponentID> Component ID
<RegisterName> Chip layer register name
radiusServerDeadtimeGet(): Failed to find server
Informational
Failed to obtain server information.
radiusServerSourceIPGet(): Failed to find server
Informational
Failed to obtain server information.
radiusTimeOutDurationGet(): Failed to find server
832 December/2018
FUJITSU PSWITCH
Informational
Failed to obtain server information.
Message Collection
Received corrupt Cluster-RADIUS-Client-Global-Message, reading element 0x<ID>.
Informational
Received corrupted message.
<ID> ID
Source IP address Parameter Get Failed!
Informational
Source IP address Parameter Get Failed.
Time out Duration Get Failed!
Informational
Time out Duration Get Failed.
Unknown event dropped without handling.
Informational
RADIUS component unknown event dropped without handling.
RADIUS:fail, server not found.
Informational
RADIUS server not found.
RADIUS:fail to authenticate. Username or password is wrong.
Informational
Authenticatation fail because wrong username or password.
<FunctionName>: Radius server not selected. Request Type:
<TypeValue> Requestor: <ComponentID>, <ComponentName>
December/2018 833
Message Collection
Notice
Radius server is not selected.
<FunctionName> Log is created by this function.
<TypeValue>
<ComponentID>
Type Value
Component ID
<ComponentName> Component name
FUJITSU PSWITCH
RADIUS: Access-Accpet failed to validate id=<ID>. The RADIUS
Client received an invalid message from the server.
Notice
Failed to validate Access-Accpet.
<ID> ID
RADIUS: Access-Challenge failed to validate, id=<ID>. The RADIUS
Client received an invalid message from the server.
Notice
Failed to validate Access-Challenge.
<ID> ID
RADIUS: Accounting-Response failed to validate id=<ID>. The
RADIUS Client received an invalid message from the server.
Notice
Failed to validate Accounting-Response.
<ID> ID
RADIUS: Buffer is too small for response processing. RADIUS Client attempted to build a response larger than resources allow.
Notice
RADIUS Client attempted to build a response larger than resources allow.
RADIUS: Could not allocate accounting requestInfo. Resource issue with RADIUS Client service.
834 December/2018
FUJITSU PSWITCH
Notice
Failed to allocate a request buffer.
Message Collection
RADIUS: Could not allocate requestInfo. Resource issue with
RADIUS Client service.
Notice
Failed to allocate a request buffer.
RADIUS: Could not get the Task Sync semaphore!. Resource issue with RADIUS Client service.
Notice
Failed to take semaphore.
RADIUS: Failed to send the request. A problem communicating with the RADIUS server.
Notice
A problem communicating with the RADIUS server.
RADIUS: Failed to validate an attribute <TypeValue>. The RADIUS
Client received an invalid message from the server.
Notice
Failed to validate an attribute.
<TypeValue> Type Value
RADIUS: Failed to validate attribute <TypeValue>. The RADIUS
Client received an invalid message from the server.
Notice
Failed to validate an attribute.
<TypeValue> Type Value
RADIUS: Failed to validate Message-Authenticator id=<ID>. The
RADIUS Client received an invalid message from the server.
December/2018 835
Message Collection
Notice
Failed to validate Message-Authenticator.
<ID> ID
FUJITSU PSWITCH
RADIUS: Invalid data length - <LengthValue>. The RADIUS Client received an invalid message from the server.
Notice
The RADIUS Client received an invalid message from the server.
<LengthValue> ipv6 prefix length
RADIUS: Invalid packet length - <PacketLength>. The RADIUS Client received an invalid message from the server.
Notice
The RADIUS Client received an invalid message from the server.
<PacketLength> Packet length
RADIUS: osapiSocketRecvFrom returned error. Error while attempting to read data from the RADIUS server.
Notice
Radius component received invalid packets.
RADIUS: Response is missing Message-Authenticator id=<ID>. The
RADIUS Client received an invalid message from the server.
Notice
Response is missing Message-Authenticator.
<ID> ID
RADIUS: Server address doesn't match configured server. RADIUS
Client received a server response from an unconfigured server.
Notice
RADIUS server is not existed.
RADIUS: Server Entry is Null or Could not allocate Radius Packet
836 December/2018
FUJITSU PSWITCH
Notice
Server entry is null or could not allocate radius packet.
2.1.60.
RMON
Message Collection
RMON NIM startup callback invoked with invalid phase
<NimStartupPhaseNumber>
Error
Parameter error happened when processing NIM interface event, during initialization phase. It should not happened, except software bug occur.
<NimStartupPhaseNumber> NIM startup phase number
Failed to Create RMON Task.
Informational
Unable to create RMON task, during initialization phase.
2.1.61.
RPCSRV
Error starting rpcsrvTask: inst=<InstanceID> sockid=<SocketID>
Alert
Error when starting rpcsrvTask.
<InstanceID> Instance ID
<SocketID> Socket ID
rpcsrvTask unable to allocate msg buffer: inst=<InstanceID> sockid=<SocketID> bufsiz=<SizeValue>
Alert
RpcsrvTask unable to allocate msg buffer.
<InstanceID> Instance ID
<SocketID> Socket ID
<SizeValue> An integer for a specific range or a limit value.
Cannot open server socket: inst=<InstanceID> sockid=<SocketID> errno=<ErrorCode> (<ErrorMessage>)
December/2018 837
Message Collection
Error
Cannot open server socket.
<InstanceID> Instance ID
<SocketID>
<ErrorCode>
<ErrorMessage>
Socket ID
Error code
Error message
FUJITSU PSWITCH
Server socket message processing error: inst=<InstanceID> sockid=<SocketID> total_seen=<CountValue> msglen=<SizeValue>
Notice
Server socket message processing error.
<InstanceID> Instance ID
<SocketID>
<CountValue>
<SizeValue>
Socket ID
Count Value
An integer for a specific range or a limit value.
Server socket receive error: inst=<InstanceID> sockid=<SocketID> total_seen=<CountValue> errno=<ErrorCode> (<ErrorMessage>)
Notice
Server socket receive error.
<InstanceID> Instance ID
<SocketID>
<CountValue>
<ErrorCode>
<ErrorMessage>
Socket ID
Count Value
Error code
Error message
Server socket send error: inst=<InstanceID> sockid=<SocketID> total_seen=<CountValue> errno=<ErrorCode> (<ErrorMessage>)
Notice
Server socket send error.
<InstanceID> Instance ID
<SocketID> Socket ID
<CountValue>
<ErrorCode>
<ErrorMessage>
Count Value
Error code
Error message
Truncated message received on server socket: inst=<InstanceID> sockid=<SocketID> total_seen=<CountValue> bufsiz=<SizeValue> msglen=<SizeValue>
838 December/2018
FUJITSU PSWITCH
Notice
Message Collection
Truncated message received on server socket.
<InstanceID> Instance ID
<SocketID>
<CountValue>
<SizeValue>
Socket ID
Count Value
An integer for a specific range or a limit value.
2.1.62.
RSOCK
[VRF-ID:<VrfID>]: Error in creating command socket. Exiting!
Error
Error in creating command socket.
<VrfID> ID of Virtual Routing and Forwarding Instance
[VRF-Id <VrfID>]: Failed to setsockopt SO_SNDBUF on rsock agent command socket, errno <ErrorCode>
Warning
Failed to setsockopt SO_SNDBUF on rsock agent command socket
<VrfID> ID of Virtual Routing and Forwarding Instance
<ErrorCode> Error code
[VRF-Id <VrfID>]: Failed to setsockopt SO_RCVBUF on rsock agent command socket, errno <ErrorCode>
Warning
Failed to setsockopt SO_RCVBUF on rsock agent command socket
<VrfID> ID of Virtual Routing and Forwarding Instance
<ErrorCode> Error code
[VRF-Id <VrfID>]: Error in binding command socket. Exiting!
Error
Error in binding command socket.
<VrfID> ID of Virtual Routing and Forwarding Instance
[VRF-Id <VrfID>]: Failed to alloc memory for rsock AVL tree.
Exiting!
December/2018 839
Message Collection
Error
FUJITSU PSWITCH
Failed to alloc memory for rsock AVL tree.
<VrfID> ID of Virtual Routing and Forwarding Instance
[VRF-Id <VrfID>]: Failed to alloc memory for client socket AVL tree.
Exiting!
Error
Failed to alloc memory for client socket AVL tree.
<VrfID> ID of Virtual Routing and Forwarding Instance
[VRF-Id <VrfID>]: Failed to alloc memory for data buffer. Exiting!
Error
Failed to alloc memory for data buffer.
<VrfID> ID of Virtual Routing and Forwarding Instance
[VRF-Id <VrfID>]: Error in receiving cmd from client by relay agent, error <ErrorCode>.
Notice
Error in receiving cmd from client by relay agent
<VrfID> ID of Virtual Routing and Forwarding Instance
<ErrorCode> Error code
[VRF-Id <VrfID>]: Failed to send reply (type <SocketOP>) to client from relay agent in VRF <VrfID>, error <ErrorCode>
Notice
Failed to send reply to client from relay agent
<VrfID> ID of Virtual Routing and Forwarding Instance
<SocketOP>
<ErrorCode>
Socket operations
Error code
[VRF-Id <VrfID>]: Failed to create local socket for a client (pid
<ProcessID>) with error <ErrorCode>
840 December/2018
FUJITSU PSWITCH
Warning
Message Collection
Failed to create local socket for a client
<VrfID> ID of Virtual Routing and Forwarding Instance
<ProcessID>
<ErrorCode>
Process id
Error code
[VRF-Id <VrfID>]: Failed to create client side socket for a client
(pid <ProcessID>) with error <ErrorCode>
Warning
Failed to create client side socket for a client
<VrfID> ID of Virtual Routing and Forwarding Instance
<ProcessID> Process id
<ErrorCode> Error code
[VRF-Id <VrfID>]: Failed to bind client side unix socket for a client (pid <ProcessID>) with error <ErrorCode>
Warning
Failed to bind client side unix socket for a client
<VrfID> ID of Virtual Routing and Forwarding Instance
<ProcessID>
<ErrorCode>
Process id
Error code
[VRF-Id <VrfID>]: Listen on client socket <SocketFD> (for pid
<ProcessID>) failed with error <ErrorCode>
Warning
Listen on client socket failed.
<VrfID> ID of Virtual Routing and Forwarding Instance
<SocketFD> File descriptor for socket
<ProcessID>
<ErrorCode>
Process id
Error code
[VRF-Id <VrfID>]: Setting the client socket <SocketFD> (for pid
<ProcessID>) as non-blocking failed with error <ErrorCode>
December/2018 841
Message Collection
Warning
FUJITSU PSWITCH
Setting the client socket as non-blocking failed.
<VrfID> ID of Virtual Routing and Forwarding Instance
<SocketFD>
<ProcessID>
<ErrorCode>
File descriptor for socket
Process id
Error code
[VRF-Id <VrfID>]: Insertion into rsock agent's local sock table failed for fd <SocketFD>
Warning
Insertion into rsock agent's local sock table failed because of table full.
<VrfID> ID of Virtual Routing and Forwarding Instance
<SocketFD> File descriptor for socket
[VRF-Id <VrfID>]: Duplicate socket found in rsock agent's local sock table for fd <SocketFD>,
Warning
Duplicate entry exists, delete it and insert the new one.
<VrfID> ID of Virtual Routing and Forwarding Instance
<SocketFD> File descriptor for socket
[VRF-Id <VrfID>]: Insertion into rsock agent's client sock table failed for fd <SocketFD>
Warning
Insertion into rsock agent's client sock table failed because of table full.
<VrfID> ID of Virtual Routing and Forwarding Instance
<SocketFD> File descriptor for socket
[VRF-Id <VrfID>]: Duplicate socket found in rsock agent's client sock table for fd <SocketFD>,
Warning
Duplicate entry exists, delete it and insert the new one.
<VrfID> ID of Virtual Routing and Forwarding Instance
<SocketFD> File descriptor for socket
[VRF-Id <VrfID>]: Socket not found to bind (for pid <ProcessID>) with error <ErrorCode>
842 December/2018
FUJITSU PSWITCH
Warning
Message Collection
Socket not found to bind.
<VrfID> ID of Virtual Routing and Forwarding Instance
<ProcessID>
<ErrorCode>
Process id
Error code
[VRF-Id <VrfID>]: Failed to bind local socket for a client (pid
<ProcessID>) with error <ErrorCode>
Warning
Failed to bind local socket for a client.
<VrfID> ID of Virtual Routing and Forwarding Instance
<ProcessID> Process id
<ErrorCode> Error code
[VRF-Id <VrfID>]: Socket not found to listen for a client (pid
<ProcessID>) with error <ErrorCode>
Warning
Socket not found to listen for a client.
<VrfID> ID of Virtual Routing and Forwarding Instance
<ProcessID>
<ErrorCode>
Process id
Error code
[VRF-Id <VrfID>]: Failed to listen on a local socket for a client
(pid <ProcessID>) with error <ErrorCode>
Warning
Failed to listen on a local socket for a client.
<VrfID> ID of Virtual Routing and Forwarding Instance
<ProcessID> Process id
<ErrorCode> Error code
[VRF-Id <VrfID>]: Setting the local socket <SocketFD> (for pid
<ProcessID>) as non-blocking failed with error <ErrorCode>
December/2018 843
Message Collection
Warning
FUJITSU PSWITCH
Setting the local socket as non-blocking failed.
<VrfID> ID of Virtual Routing and Forwarding Instance
<SocketFD>
<ProcessID>
<ErrorCode>
File descriptor for socket
Process id
Error code
[VRF-Id <VrfID>]: Socket not found to connect for a client (pid
<ProcessID>) with error <ErrorCode>
Warning
Socket not found to connect for a client.
<VrfID> ID of Virtual Routing and Forwarding Instance
<ProcessID>
<ErrorCode>
Process id
Error code
[VRF-Id <VrfID>]: Connect on a local socket (for pid <ProcessID>) returned error <ErrorCode>
Warning
Connect on a local socket fail.
<VrfID> ID of Virtual Routing and Forwarding Instance
<ProcessID> Process id
<ErrorCode> Error code
[VRF-Id <VrfID>]: Socket not found to setsockopt for a client (pid
<ProcessID>)
Debug
Socket not found to setsockopt
<VrfID> ID of Virtual Routing and Forwarding Instance
<ProcessID> Process id
[VRF-Id <VrfID>]: Failed to setsockopt on a local socket for a client (pid <ProcessID>) with error <ErrorCode>
844 December/2018
FUJITSU PSWITCH
Warning
Message Collection
Failed to setsockopt on a local socket
<VrfID> ID of Virtual Routing and Forwarding Instance
<ProcessID>
<ErrorCode>
Process id
Error code
[VRF-Id <VrfID>]: Local socket fd <SocketFD> not found to accept for a client (pid <ProcessID>) with error <ErrorCode>
Warning
Local socket not found.
<VrfID>
<SocketFD>
<ProcessID>
<ErrorCode>
ID of Virtual Routing and Forwarding Instance
File descriptor for socket
Process id
Error code
[VRF-Id <VrfID>]: No connections to be accepted, but accept called on local Socket fd <SocketFD>
Warning
No connections to be accepted, but accept called on local Socket.
<VrfID> ID of Virtual Routing and Forwarding Instance
<SocketFD> File descriptor for socket
[VRF-Id <VrfID>]: Socket not found to getpeername for a client (pid
<ProcessID>) with error <ErrorCode>
Warning
Socket not found to getpeername for a client.
<VrfID> ID of Virtual Routing and Forwarding Instance
<ProcessID> Process id
<ErrorCode> Error code
[VRF-Id <VrfID>]: Failed to getpeername on a local socket for a client (pid <ProcessID>) with error <ErrorCode>
December/2018 845
Message Collection
Warning
FUJITSU PSWITCH
Failed to getpeername on a local socket for a client.
<VrfID> ID of Virtual Routing and Forwarding Instance
<ProcessID>
<ErrorCode>
Process id
Error code
[VRF-Id <VrfID>]: Socket not found to getsockname for a client (pid
<ProcessID>)
Debug
Socket not found.
<VrfID>
<ProcessID>
ID of Virtual Routing and Forwarding Instance
Process id
[VRF-Id <VrfID>]: Failed to getsockname on a local socket for a client (pid <ProcessID>) with error <ErrorCode>
Warning
Failed to getsockname on a local socket.
<VrfID> ID of Virtual Routing and Forwarding Instance
<ProcessID> Process id
<ErrorCode> Error code
[VRF-Id <VrfID>]: Failed to shutdown on a local socket for a client
(pid <ProcessID>) with error <ErrorCode>
Warning
Failed to shutdown on a local socket.
<VrfID> ID of Virtual Routing and Forwarding Instance
<ProcessID>
<ErrorCode>
Process id
Error code
[VRF-Id <VrfID>]: Failed to shutdown on a client facing socket for a client (pid <ProcessID>) with error <ErrorCode>
846 December/2018
FUJITSU PSWITCH
Warning
Message Collection
Failed to shutdown on a client facing socket.
<VrfID> ID of Virtual Routing and Forwarding Instance
<ProcessID>
<ErrorCode>
Process id
Error code
[VRF-Id <VrfID>]: Insertion of new client socket failed for remote server
Warning
Insertion of new client socket failed for remote server.
<VrfID> ID of Virtual Routing and Forwarding Instance
[VRF-Id <VrfID>]: Send failed on local socket. Errno <ErrorCode>
Debug
Local socket send failed.
<VrfID> ID of Virtual Routing and Forwarding Instance
<ErrorCode> Error code
[VRF-Id <VrfID>]: Connect failed to server (remote client). Errno
<ErrorCode>
Warning
Connect to server failed.
<VrfID> ID of Virtual Routing and Forwarding Instance
<ErrorCode> Error code
[VRF-Id <VrfID>]: Insertion into rsock table failed in remote server
Warning
Insertion into rsock table failed in remote server
<VrfID> ID of Virtual Routing and Forwarding Instance
[VRF-Id <VrfID>]: Insertion into client socket table failed in remote server
December/2018 847
Message Collection
Warning
FUJITSU PSWITCH
Insertion into client socket table failed in remote server
<VrfID> ID of Virtual Routing and Forwarding Instance
[VRF-Id <VrfID>]: Send failed on client socket. Errno %d
Debug
Send failed on client socket
<VrfID> ID of Virtual Routing and Forwarding Instance
2.1.63.
SFLOW
Failure creating sFlow queue semaphore.
Alert
Failure creating sFlow queue semaphore.
Failure creating sFlow rw lock.
Alert
Failure creating sFlow rw lock.
Failure in sending sFlow configurator init message
Alert
Failure in sending sFlow configurator init message.
Unable to create event queue.
Alert
Unable to create event queue.
Unable to create packet queue.
Alert
Unable to create packet queue.
Unable to create sFlow thread.
848 December/2018
FUJITSU PSWITCH
Alert
Unable to create sFlow thread.
Message Collection
Unable to initialize sFlow task.
Alert
Unable to initialize sFlow task.
Change in configuration found for Monitor session [<ID>]
Debug
Change in configuration found for monitor session.
<ID> ID
No change in configuration for Monitor session [<ID>]
Debug
No change in configuration found for monitor session.
<ID> ID
Sending data to socket failed. Local address <IPAddress>, port
<IPPortNumber> - errno <ErrorCode>
Debug
Sending data to socket failed.
<IPAddress> ip_address, or, ipv6_address, or hostname
<IPPortNumber> UDP or TCP port number, ex:8000, 21
<ErrorCode> Error code
sFlow IP ACL id exists
Debug
sFlow IP ACL id exists.
sFlow MAC ACL id exists
Debug
sFlow MAC ACL id exists.
Failed to give msgQueue semaphore
December/2018 849
Message Collection
Error
Failed to give sFlow message queue semaphore.
FUJITSU PSWITCH
Invalid arguments.
Error
Getting sFlow counters invalid arguments.
Receiver is already configured on this interface
Error
Receiver is already configured on this interface.
Remote Agent not supported for Broadcast/Multicast address
Error
Remote agent not supported for Broadcast/Multicast address.
Remote Agent not supported for IPv6
Error
Remote agent not supported for IPv6.
Remoteagent is already configured on this interface
Error
Remoteagent is already configured on this interface.
sFlowIntfAttach: could not enable the poller object for interface
<InterfaceNumber>. The configuration of new stack member ports added failed.
850 December/2018
FUJITSU PSWITCH
Error
Message Collection
Could not enable the poller object for interface. The configuration of new stack member ports added failed.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
sFlowIntfAttach: could not enable the sampler object for interface
<InterfaceNumber>. The configuration of new stack member ports added failed.
Error
Could not enable the sampler object for interface. The configuration of new stack member ports added failed.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
sFlowSamplerOperModeSet: Failed to set sampling rate in hardware for dsIndex <Index>. Sampling rate set failed in driver
Error
Failed to set sampling rate in hardware for data source index.
<Index> Index
Unable to get the semaphore for sflow message queue
Error
Unable to get the semaphore for sflow message queue.
Unable to reserve the monitor session
Error
Unable to reserve the monitor session.
Unable to un-reserve the monitor session
Error
Unable to un-reserve the monitor session.
ACL id matches the sFlow filter
December/2018 851
Message Collection
Informational
ACL id matches the sFlow.
App timer initialization failed.
Informational
App timer initialization failed.
Error allocating handle list buffers.
Informational
Error allocating handle list buffers.
FUJITSU PSWITCH
Error in allocating buffers for sFlow
Informational
Error in allocating buffers for sFlow.
Error in allocating data for poller AVL tree
Informational
Error in allocating data for poller AVL tree.
Error in allocating data for sampler AVL tree.
Informational
Error in allocating data for sampler AVL tree.
Failed to Create Sflow HW monitor session [<ID>]
Informational
Failed to create sflow hardware monitor session
<ID> ID
Failed to destroy Sflow HW monitor session [<ID>]
852 December/2018
FUJITSU PSWITCH
Informational
Failed to destroy sflow hardware monitor session.
<ID> ID
Message Collection
Falied to allocate memory for Sflow timer buffers.
Informational
Falied to allocate memory for Sflow timer buffers.
FlowSamplingRateThrottle: Failed to modify sampling rate for dsIndex <Index> instance <SflowInstance>
Informational
Failed to modify sampling rate.
<Index> Index
<SflowInstance> Sflow instance
NIM interface query failed for interface <InterfaceNumber>.
Informational
NIM interface query failed for interface.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Registering sFlow ACL Change approval failed.
Informational
Registering sFlow ACL Change approval failed.
Remote agent <IPAddress> is not reachable
Informational
Remote agent is not reachable.
<IPAddress> ip_address, or, ipv6_address, or hostname
sFlowApplyConfigData: Failed to apply global config
December/2018 853
Message Collection
Informational
Write sFlow global config failed.
FUJITSU PSWITCH
sFlowCpIntervalSet: Failed to give msgQueue semaphore
Informational
Failed to give sFlow message queue semaphore.
sFlowFsPacketSamplingRateSet: Failed to give msgQueue semaphore
Informational
Failed to give sFlow message queue semaphore.
sFlowIntfChangeCallback: Failed to give msgQueue semaphore
Informational
Failed to give sFlow message queue semaphore.
sFlowIntfChangeCallback: Received an interface change callback while not ready to receive it
Informational
Received an interface change callback while not ready to receive it.
sFlowIntfChangeProcess: Received an interface change callback while not ready to receive it
Informational
Received an interface change callback while not ready to receive it.
sFlowIntfDelete: could not delete the poller object for interface
<InterfaceNumber>
Informational
Could not delete the poller object for interface.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
sFlowIntfDelete: could not delete the sampler object for interface
<InterfaceNumber>
854 December/2018
FUJITSU PSWITCH
Informational
Message Collection
Could not delete the sampler object for interface.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
sFlowIntfDetach: could not disable the poller object for interface
<InterfaceNumber>
Informational
Could not disable the poller object for interface.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
sFlowIntfDetach: could not disable the sampler object for interface <InterfaceNumber>
Informational
Could not disable the sampler object for interface.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
sFlowPduReceive: Failed to give msgQueue semaphore
Informational
Failed to give sFlow message queue semaphore.
sFlowPollerAdd: failed to add poller object for dsIndex <Index> instance <SflowInstance>
Informational
Failed to add poller object for data source index.
<Index> Index
<SflowInstance> Sflow instance
sFlowPollerAdd: failed to enable poller for dsIndex <Index> instance <SflowInstance>
December/2018 855
Message Collection
Informational
Failed to enable poller for data source index.
<Index> Index
<SflowInstance> Sflow instance
FUJITSU PSWITCH
sFlowPollerAdd: failed to find the added poller object for dsIndex
<Index> instance <SflowInstance>
Informational
Failed to find the added poller object for data source index.
<Index> Index
<SflowInstance> Sflow instance
sFlowPollerDelete: failed to disable poller for dsIndex <Index> instance <SflowInstance>
Informational
Failed to disable poller for data source index.
<Index> Index
<SflowInstance> Sflow instance
sFlowPollerIntervalApply: Failed to enable poller for dsIndex
<Index> instance <SflowInstance>
Informational
Failed to enable poller for data source index.
<Index> Index
<SflowInstance> Sflow instance
sFlowPollerOperModeSet: Timer start failed for dsIndex <Index> instance <SflowInstance>
Informational
Timer start failed for data source index.
<Index> Index
<SflowInstance> Sflow instance
sFlowPollerOperModeSet: Timer stop failed for dsIndex <Index> instance <SflowInstance>
856 December/2018
FUJITSU PSWITCH
Informational
Timer stop failed for data source index.
<Index> Index
<SflowInstance> Sflow instance
Message Collection
sFlowPollerTimerExpiry: Failed to restart poller timer for dsIndex <Index>
Informational
Failed to restart poller timer for data source index.
<Index> Index
sFlowPollerTimerExpiry: Failed to retrieve handle
Informational
Failed to retrieve handle.
sFlowPollerTimerStart: Could not start poller timer for dsIndex
<Index> instance <SflowInstance>
Informational
Could not start poller timer.
<Index> Index
<SflowInstance> Sflow instance
sFlowPollerTimerStart: Timer could not be updated for dsIndex
<Index> instance <SflowInstance> interval <TimeValue>
Informational
Timer could not be updated.
<Index> Index
<SflowInstance>
<TimeValue>
Sflow instance
Time Value
sFlowPollerTimerStop: Failed to stop poller timer for dsIndex
<Index> instance <SflowInstance>
December/2018 857
Message Collection
Informational
Failed to stop poller timer.
<Index> Index
<SflowInstance> Sflow instance
FUJITSU PSWITCH
sFlowRcvrAddressSet: Failed to give msgQueue semaphore
Informational
Failed to give sFlow message queue semaphore.
sFlowRcvrOnwerSet: Failed to give msgQueue semaphore
Informational
Failed to give sFlow message queue semaphore.
sFlowReceiverAddressApply: Failed to set poller object on interface: <InterfaceNumber>
Informational
Failed to set poller object on interface.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
sFlowReceiverAddressApply: Failed to set sampler object on interface: <InterfaceNumber>
Informational
Failed to set sampler object on interface.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
sFlowReceiverFlowSampleAdd: Failed to send out datagram
Informational
Failed to send out datagram for sFlow.
sFlowReceiverFlowSampleAdd: sample length is overshooting max datagram size
858 December/2018
FUJITSU PSWITCH
Informational
sFlow sample length is overshooting max datagram size.
Message Collection
sFlowReceiverFlowSampleWrite: flow record type <TypeValue> not supported
Informational
sFlow type not supported.
<TypeValue> Type Value
sFlowReceiverSampleAdd: data_format <SflowDataFormat> not supported
Informational
sFlow data format not supported.
<SflowDataFormat> Sflow data format
sFlowReceiverSampleDatagramHeaderWrite: IPv4 agent address get failed
Informational
IPv4 agent address get failed.
sFlowReceiverSampleDatagramHeaderWrite: IPv6 agent address get failed
Informational
IPv6 agent address get failed.
sFlowSamplerAdd: failed to add sampler object for dsIndex <Index> instance <SflowInstance>
Informational
Failed to add sampler object for data source index.
<Index> Index
<SflowInstance> Sflow instance
sFlowSamplerAdd: failed to enable sampler for dsIndex <Index> instance <SflowInstance>
December/2018 859
Message Collection
Informational
Failed to enable sampler for data source index.
<Index> Index
<SflowInstance> Sflow instance
FUJITSU PSWITCH
sFlowSamplerAdd: failed to find the added sampler object for dsIndex <Index> instance <SflowInstance>
Informational
Failed to find the added sampler object for data source index.
<Index> Index
<SflowInstance> Sflow instance
sFlowSamplerDelete: failed to disable sampler for dsIndex <Index> instance <SflowInstance>
Informational
Failed to disable sampler for data source index.
<Index> Index
<SflowInstance> Sflow instance
sFlowSamplerOperModeSet: Failed to read sampling rate from hardware for dsIndex <Index>
Informational
Failed to read sampling rate from hardware for data source index.
<Index> Index
sFlowSamplerPollerInstancesCleanup: could not delete poller for dsIndex <Index> instance <SflowInstance>
Informational
Could not delete poller for data source index.
<Index> Index
<SflowInstance> Sflow instance
sFlowSamplerPollerInstancesCleanup: could not delete sampler for dsIndex <Index> instance <SflowInstance>
860 December/2018
FUJITSU PSWITCH
Informational
Could not delete sampler for data source index.
<Index> Index
<SflowInstance> Sflow instance
Message Collection
sFlowSamplerRateApply: Failed to enable sampler for dsIndex
<Index> instance <SflowInstance>
Informational
Failed to enable sampler for data source index.
<Index> Index
<SflowInstance> Sflow instance
sflowSave: Error on call to sysapiCfgFileWrite file <FileName>
Informational
Write sFlow config file failed.
<FileName> Log is created by this file.
sFlowTask(): Internal event msg receive failed
Informational
Internal event message receive failed.
sFlowTask(): invalid message type:<TypeValue>.
<FileName>:<FileLineNumber>
Informational
Invalid message type.
<TypeValue>
<FileName>
<FileLineNumber>
Type Value
Log is created by this file.
Log is created by this line.
sflowTimerExpiryHdlr(): Sflow timer tick send failed
Informational
Sflow timer tick send failed.
sflowTimerExpiryHdlr: MsgQSema give failed
December/2018 861
Message Collection
Informational
Failed to give sFlow message queue semaphore.
FUJITSU PSWITCH
sFlowTimerTickProcess: Failed to flush the receiver data
Informational
Failed to flush the receiver data.
Unable to create sockets.
Informational
Unable to create sockets.
Unable to create timer handle list.
Informational
Unable to create timer handle list.
Unable to get destination MAC address of receiver
Informational
Unable to get destination MAC address of receiver.
Unable to get destination MAC address of receiver, Retrying ..
Informational
Unable to get destination MAC address of receiver. On retrying case.
Unable to get IP and MAC address of sflow source interface
Informational
Unable to get IP and MAC address of sflow source interface.
Unable to set Destination port <InterfaceNumber> for monitor session[<ID>], return code is <ErrorCode>
862 December/2018
FUJITSU PSWITCH
Informational
Message Collection
Unable to set destination port for monitor session.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<ID>
<ErrorCode>
0/1, 0/0/1
ID
Error code
Unregistering sFlow ACL Change approval failed.
Informational
Unregistering sFlow ACL Change approval failed.
Could not set egress sampling rate to <SetValue> in hardware
(dsIndex <Index>). Actual value is <SamplingRateValue>.
Notice
Could not set egress sampling rate to hardware.
<SetValue> Set Value
<Index> Index
<SamplingRateValue> For sFlow sampling rate configuration of ingress, egress, flow base.
Could not set flow based sampling rate to <SetValue> in hardware
(dsIndex <Index>). Actual value is <SamplingRateValue>.
Notice
Could not set flow based sampling rate to hardware.
<SetValue> Set Value
<Index> Index
<SamplingRateValue> For sFlow sampling rate configuration of ingress, egress, flow base.
Could not set ingress sampling rate to <SetValue> in hardware
(dsIndex <Index>). Actual value is <SamplingRateValue>.
December/2018 863
Message Collection
Notice
FUJITSU PSWITCH
Could not set ingress sampling rate to hardware.
<SetValue> Set Value
<Index> Index
<SamplingRateValue> For sFlow sampling rate configuration of ingress, egress, flow base.
sFlowPollerTimerStart: Could not get the handle node to store the expiry timer data. Timer list is full and no more new timer creations are possible.
Warning
Could not get the handle node to store the expiry timer data. Timer list is full and no more new timer creations are possible.
2.1.64.
SIM
Failed to create event handler for <HandlerName>.
Alert
Failed to create event handler.
<HandlerName> Handler Name
Failed to delete event sequence number to correlator map.
Alert
Failed to delete event sequence number to correlator map.
Unable to allocate data heap for async event correlator tree for
<HandlerName>.
Alert
Unable to allocate data heap for async event correlator tree.
<HandlerName> Handler Name
Unable to allocate tree heap for async event correlator tree for
<HandlerName>.
864 December/2018
FUJITSU PSWITCH
Alert
Unable to allocate tree heap for async event correlator tree.
<HandlerName> Handler Name
Message Collection
Unable to create correlator semaphore for async event handler
<HandlerName>.
Alert
Unable to create correlator semaphore for async event handler.
<HandlerName> Handler Name
IP address conflict on <ManagementPortType> for IP address
<IPAddress>. Conflicting host MAC address is <MacAddress>
Critical
IP address conflict with other host.
<ManagementPortType> "L7_MGMT_SERVICEPORT", "L7_MGMT_NETWORKPORT",
<IPAddress>
<MacAddress>
"L7_MGMT_IPPORT" ip_address, or, ipv6_address, or hostname
MAC address
Unable to obtain trace buffer for App ID <ID>, TLV handle
<TlvHandleValue>. FASTPATH trace component is out of trace buffers.
Critical
Unable to obtain trace buffer for application is out of trace buffers.
<ID> ID
<TlvHandleValue> Type value for tlv block handle
Failure to open config file to write.
Critical
Failure to open config file to write.
Failure to write config file.
December/2018 865
Message Collection
Critical
Failure to write config file.
FUJITSU PSWITCH
Client <ComponentID>, <ComponentName> of async event handler
<HandlerName> responded to an invalid event with event sequence number <SequenceNumber>.
Debug
Async event handler responded to an invalid event.
<ComponentID> Component ID
<ComponentName> Component name
<HandlerName> Handler Name
<SequenceNumber> Sequence number
Failed to set the default gateway in the IP stack.
Debug
Failed to set the default gateway in the IP stack.
Image file <FileName> : No Digital signature found
Debug
No Digital signature found.
<FileName> Log is created by this file.
Invalid transfer direction <Direction>
Debug
Invalid transfer direction.
<Direction> Direction
Remote Message send to BSP failed with rc <ErrorCode>
Debug
Failed to remote Message send to BSP.
<ErrorCode> Error code
Script file <FileName> : No Digital signature found
866 December/2018
FUJITSU PSWITCH
Debug
No Digital signature found.
<FileName> Log is created by this file.
Message Collection
Cannot allocate memory for helper timer list
Emergency
Cannot allocate memory for helper timer list
Unable to initialize simPts_task()
Emergency
Unable to initialize SIM timer task.
Failed to create PTS tasks.
Emergency
Failed to create PTS tasks.
Async event client <ComponentID>, <ComponentName> of handler
<HandlerName> unexpectedly signalled event <EventID> completion.
Error
Async event client is not responded.
<ComponentID> Component ID
<ComponentName> Component name
<HandlerName> Handler Name
<EventID> Event ID
Async event from <HandlerName> timed out. No response from the following event clients: <ClientName>.
Error
Async event client is timed out.
<HandlerName> Handler Name
<ClientName> Client name would display which routing protocol (BGP,
OSPF, ...) redistributes the best route
Async event handler <HandlerName> attempting to delete a correlator <SequenceNumber> which is not in use
December/2018 867
Message Collection
Error
Attempting to delete a correlator which is not in use.
<HandlerName> Handler Name
<SequenceNumber> Sequence number
Bad parameters to <FunctionName>.
Error
Create a correlator with bad parameters.
<FunctionName> Log is created by this function.
FUJITSU PSWITCH
Could not delete AVL tree semaphore for async event handler
<HandlerName>.
Error
Could not delete AVL tree semaphore for async event handler.
<HandlerName> Handler Name
Failed to delete a correlator map entry for sequence number
<SequenceNumber> for async event handler <HandlerName>.
Error
Failed to delete a correlator map entry for async event handler.
<SequenceNumber> Sequence number
<HandlerName> Handler Name
Failed to find and delete a correlator map entry for sequence number
<SequenceNumber> for async event handler <HandlerName>.
Error
Failed to find and delete a correlator map entry for async event handler.
<SequenceNumber> Sequence number
<HandlerName> Handler Name
Failed to find correlator with seqno <SequenceNumber> for expired async event from <HandlerName>.
868 December/2018
FUJITSU PSWITCH
Error
Failed to find correlator for expired async event.
<SequenceNumber> Sequence number
<HandlerName> Handler Name
Message Collection
Failed to find correlator for async event from <HandlerName>.
Error
Failed to find correlator for async event.
<HandlerName> Handler Name
Failed to find correlator to start event from <HandlerName>.
Error
Failed to find correlator to start event.
<HandlerName> Handler Name
Failed to insert a correlator map entry for sequence number
<SequenceNumber> for async event handler <HandlerName>.
Error
Failed to insert a correlator map entry for async event handler.
<SequenceNumber> Sequence number
<HandlerName> Handler Name
Failed to save configuration for component <ComponentName>.
Error
Failed to save configuration for component.
<ComponentName> Component name
Failed to save configuration for component with component ID
<ComponentID>.
Error
Failed to save configuration for component.
<ComponentID> Component ID
For async event handler <HandlerName>, correlator with seqno
<SequenceNumber> for expired async event is not in use.
December/2018 869
Message Collection
Error
FUJITSU PSWITCH
For async event handler, correlator for expired async event is not in use.
<HandlerName> Handler Name
<SequenceNumber> Sequence number
Found an idle correlator when handler <HandlerName> processed event <EventID> from client <ComponentID>, <ComponentName>.
Error
Found an idle correlator when handler processed event from client.
<HandlerName> Handler Name
<EventID>
<ComponentID>
Event ID
Component ID
<ComponentName> Component name
Tried to insert a duplicate correlator map entry for sequence number <SequenceNumber> for async event handler <HandlerName>.
Error
Tried to insert a duplicate correlator map entry for async event handle.
<SequenceNumber> Sequence number
<HandlerName> Handler Name
Unable to delete correlator semaphore for component async handler
<HandlerName>
Error
Unable to delete correlator semaphore for component async handler.
<HandlerName> Handler Name
Unable to delete event handler rwlock for component async handler
<HandlerName>.
Error
Unable to delete event handler rwlock for component async handler.
<HandlerName> Handler Name
<FunctionName>: <FileLineNumber>: sysapiHpcEventHandlerCallbackRegister: Event info pasessed as
NULL
870 December/2018
FUJITSU PSWITCH
Informational
Event info pasessed as NULL.
<FunctionName> Log is created by this function.
<FileLineNumber> Log is created by this line.
Message Collection
<FunctionName>: LED Customization is not supported
Informational
LED Customization is not supported.
<FunctionName> Log is created by this function.
<FunctionName>: LINE <FileLineNumber>: Could not delete file factory-defaults
Informational
Could not delete file factory-defaults.
<FunctionName> Log is created by this function.
<FileLineNumber> Log is created by this line.
<FunctionName>: LINE <FileLineNumber>: Could not delete file startup-config
Informational
Could not delete file startup-config.
<FunctionName> Log is created by this function.
<FileLineNumber> Log is created by this line.
Attempt to deregister invalid category
Informational
deregister invalid category.
Attempt to deregister invalid component ID <ComponentID>
Informational
deregister invalid component ID.
<ComponentID> Component ID
Attempt to register invalid category <CagetoryID>
December/2018 871
Message Collection
Informational
Register invalid category.
<CagetoryID> Cagetory ID
FUJITSU PSWITCH
Attempt to register invalid component ID <ComponentID>
Informational
Register invalid component ID.
<ComponentID> Component ID
bad rc on config dump call to registrar_ID <ComponentID>,
<ComponentName>
Informational
Get component name.
<ComponentID> Component ID
<ComponentName> Component name
bad rc on debug dump call to registrar_ID <ComponentID>
Informational
Get component name.
<ComponentID> Component ID
bad rc on Save call to registrar_ID ID
Informational
Save component routing error.
bufferPoolFree: ID <PoolId>, buffer_addr NULL!
Informational
Pool buffer NULL.
<PoolId> Pool ID
Cannot allocate memory for support debug category buffers
872 December/2018
FUJITSU PSWITCH
Informational
Failed to allocate memory.
Message Collection
Cannot allocate memory for Tech Support Component Buffers
Informational
Failed to allocate memory.
Cannot de-allocate memory for Tech Support Component Buffers
Informational
Failed to de-allocate memory.
Cannot delete buffer pool- pool id = <PoolId>
Informational
Failed to delete pool
<PoolId> Pool ID
Can't set the file stream to end
Informational
Can't set the file stream
Category <CagetoryID> component <ComponentID>, <ComponentName>:
Attempt to register null name
Informational
Register null name.
<CagetoryID>
<ComponentID>
Cagetory ID
Component ID
<ComponentName> Component name
Circuit Error - vlan id & intIfNum = 0
Informational
Both of VLAN ID & interface ID are zero.
Clear routine failed for component <ComponentID>, <ComponentName>
December/2018 873
Message Collection
Informational
Clear routine failed
<ComponentID> Component ID
<ComponentName> Component name
FUJITSU PSWITCH
Component <ComponentID>, <ComponentName>: Attempt to register null string for name or help description
Informational
Register null string for name
<ComponentID> Component ID
<ComponentName> Component name
Configuration file not intended for this platform!
Informational
Configuration file error.
Configuration file on disk size <SizeValue> is less than expected size <SizeValue>.
Informational
Configuration file error.
<SizeValue> An integer for a specific range or a limit value.
Configuration file size <SizeValue> is too small.
Informational
Configuration file size is too small.
<SizeValue> An integer for a specific range or a limit value.
Debug Help routine <RoutineName> <RoutinePointer>) already registered
Informational
Routine entry is already registered.
<RoutineName> Routine name
<RoutinePointer> Routine pointer
Deregistration failed: Component <ComponentID>, <ComponentName>,
Debug Help routine <RoutineName> (<RoutinePointer>) not registered
874 December/2018
FUJITSU PSWITCH
Informational
Failed to deregister.
<ComponentID> Component ID
<ComponentName> Component name
<RoutineName> Routine name
<RoutinePointer> Routine pointer
Message Collection
Deregistration failed: Debug Help routine <RoutineName>
(<RoutinePointer>) not registered
Informational
Failed to deregister.
<RoutineName>
<RoutinePointer>
Routine name
Routine pointer
Error - Unrecognized Encapsulation type
Informational
Unrecognized Encapsulation type.
Error is: <ErrorMessage> with Error code: <ErrorCode>
Informational
TFTP error.
<ErrorMessage>
<ErrorCode>
Error message
Error code
Error on call to sysapiCfgFileWrite routine on file <FileName>
Informational
Write config file error.
<FileName> Log is created by this file.
Error on call to sysapiSupportCfgFileWrite routine on config file
<FileName>
December/2018 875
Message Collection
Informational
Write config file error.
<FileName> Log is created by this file.
FUJITSU PSWITCH
Error on call to sysapiSupportCfgFileWrite routine on file
<FileName>
Informational
Write config file error.
<FileName> Log is created by this file.
Error while getting the file
Informational
Failed to get the file.
Error while putting data into the file
Informational
Failed to put data into the file.
Error while putting the file
Informational
Failed to put the file.
Error while reading file
Informational
Failed to read file.
Error while reading the buffer
Informational
Failed to read the buffer.
Error while writing data to file
876 December/2018
FUJITSU PSWITCH
Informational
Failed to write data to file.
error while writing the file
Informational
Failed to write the file.
Error: SIM - could not add management MAC.
Informational
Failed to add management MAC.
Message Collection
Error: SIM - could not delete management MAC.
Informational
Failed to delete management MAC.
Failed to allocate <FileSize> for config file <FileName>
Informational
Failed to allocate memory.
<FileSize> File size
<FileName> Log is created by this file.
Failed to allocate <FileSize> for config file compression buffer
Informational
Failed to allocate memory.
<FileSize> File size
Failed to allocate <FileSize> for support config file <FileName>
Informational
Failed to allocate memory.
<FileSize> File size
<FileName> Log is created by this file.
Failed to allocate <FileSize> for config file <FileName>
December/2018 877
Message Collection
Informational
Failed to allocate memory.
<FileSize> File size
<FileName> Log is created by this file.
FUJITSU PSWITCH
Failed to compress config file for component <ComponentID>,
<ComponentName>
Informational
Failed to compress config file.
<ComponentID> Component ID
<ComponentName> Component name
Failed to compress data - rc = <ErrorCode> (<ErrorMessage>)
Informational
-4 was not enough memory. -5 was not enough room in the output buffer.
<ErrorCode> Error code
<ErrorMessage> Error message
Failed to compress support config file for component <ComponentID>,
<ComponentName>
Informational
Failed to compress support config file.
<ComponentID> Component ID
<ComponentName> Component name
Failed to malloc pSysapiCfgTree[<ManagementIndex>]
Informational
Failed to allocate memory.
<ManagementIndex> System config management index
Failed to malloc pSysapiSupportCfgTree[<ManagementIndex>]
Informational
Failed to allocate memory.
<ManagementIndex> System config management index
Failed to read config file <FileName> header
878 December/2018
FUJITSU PSWITCH
Informational
Failed to read config file.
<FileName> Log is created by this file.
Message Collection
Failed to read support config file <FileName> header
Informational
Failed to read support config file.
<FileName> Log is created by this file.
Failed to register entry for category <CagetoryID>, component
<ComponentID>, <ComponentName>, routine <RoutineName>
Informational
Failed to register entry.
<CagetoryID>
<ComponentID>
Cagetory ID
Component ID
<ComponentName> Component name
<RoutineName> Routine name
Failed to release the address leased via DHCP when Network port went down
Informational
Failed to release the address.
Failed to save support cfg file
Informational
Failed to save config file.
Failed to send License message
Informational
Failed to send License message.
Failed to separate component config from <FileName>
December/2018 879
Message Collection
Informational
Failed to separate component config file.
<FileName> Log is created by this file.
FUJITSU PSWITCH
Failed to uncompress config data for component <ComponentID>,
<ComponentName>
Informational
Failed to uncompress component config data.
<ComponentID> Component ID
<ComponentName> Component name
Failed to update cfg tree for component <ComponentID>,
<ComponentName> and file <FileName>
Informational
Failed to update config tree for component config file.
<ComponentID> Component ID
<ComponentName> Component name
<FileName> Log is created by this file.
Failed to update support cfg tree for component <ComponentID>,
<ComponentName> and file <FileName>
Informational
Failed to update support config tree for component config file.
<ComponentID> Component ID
<ComponentName> Component name
<FileName> Log is created by this file.
Failure closing file <FileName>
Informational
Failure closing file.
<FileName> Log is created by this file.
Failure to allocate memory for cfg for file <FileName>
880 December/2018
FUJITSU PSWITCH
Informational
Failure to allocate memory for config file.
<FileName> Log is created by this file.
Message Collection
Failure to cfg file index for file <FileName>
Informational
Failure to configure file index for config file
<FileName> Log is created by this file.
Failure to process cfg file descriptor: index <Index>
Informational
Failure to process config file descriptor.
<Index> Index
Failure to read config file header: index <Index>
Informational
Failure to read config file header.
<Index> Index
File <FileName> hdr length = <FileSize> is invalid expect
<SizeValue>
Informational
Invalid config file length.
<FileName> Log is created by this file.
<FileSize> File size
<SizeValue> An integer for a specific range or a limit value.
File <FileName> hdr name = <FileName> is invalid
Informational
Invalid config file name.
<FileName> Log is created by this file.
File copy aborted: <FileName> size <FileSize> exceeeds USB free space <SizeValue>
December/2018 881
Message Collection
Informational
FUJITSU PSWITCH
Failed to copy file to USB.
<FileName> Log is created by this file.
<FileSize>
<SizeValue>
File size
An integer for a specific range or a limit value.
hpcDescriptorDbInit: bad return code from sysapiHpcDescriptorDbInit call.
Informational
Failed to initialize the hardware platform control.
hpcInit: bad return code from hpcInit call.
Informational
Failed to initialize the hardware platform control.
Ignoring the config '<FileName>'
Informational
Ignore config file.
<FileName> Log is created by this file.
Image file <FileName> : digital signature End Tag not present
Informational
Failed to get information for image file.
<FileName> Log is created by this file.
Image file <FileName> : Failed to get digital signature
Informational
Failed to get information for image file.
<FileName> Log is created by this file.
Image file <FileName> open error
882 December/2018
FUJITSU PSWITCH
Informational
Failed to open image file.
<FileName> Log is created by this file.
Image file (<FileName>) is not valid
Informational
Invalid image file.
<FileName> Log is created by this file.
Message Collection
Input file name is NULL
Informational
Failed to get input file name.
Invalid cfgFileDescr Marker: <GetValue>
Informational
Invalid config file marker value.
<GetValue> Get Value
Invalid digital signature.
Informational
Invalid digital signature.
Invalid exit port - could not resolve exit intfNum
Informational
Invalid exit port.
Invalid unit number
Informational
Invalid unit number.
Failed to uncompress data buffer - rc = <ErrorCode> Insufficient memory
December/2018 883
Message Collection
Informational
Failed to uncompress data buffer.
<ErrorCode> Error code
FUJITSU PSWITCH
Failed to uncompress data buffer - rc = <ErrorCode> Insufficient target buffer
Informational
Failed to uncompress data buffer.
<ErrorCode> Error code
Failed to uncompress data buffer - rc = <ErrorCode> File corrupt
Informational
Failed to uncompress data buffer.
<ErrorCode> Error code
Milliseconds passed since last checked: <TimeValue>
Informational
Milliseconds passed since last checked.
<TimeValue> Time Value
Milliseconds passed since system reset: [<TimeValue>]
Informational
Milliseconds passed since system reset.
<TimeValue> Time Value
No source MAC address found
Informational
No source MAC address found.
Null value passed for supportDebugCategory
884 December/2018
FUJITSU PSWITCH
Informational
Failed to get support debug category pointer.
nvStore registrar_ID <ComponentID> greater then
NVSTORE_USER_LAST
Informational
Invalid component ID for register restore function.
<ComponentID> Component ID
Message Collection
nvStore registrar_ID <ComponentID>, <ComponentName> already registered
Informational
The component ID already registered.
<ComponentID> Component ID
<ComponentName> Component name
nvStore registrar_ID <ComponentID>, <ComponentName> not registered
Informational
The component ID not registered.
<ComponentID> Component ID
<ComponentName> Component name
osapiFsDir() failed
Informational
Failed to list directory information.
osapiMalloc() failed
Informational
Failed to allocate memory.
Out of system buffers.
December/2018 885
Message Collection
Informational
Out of system buffers.
Processing RPC, Transport StatsGet Req
Informational
Processing RPC, transport statistics from SDK.
pSysapiCfgTree[<Index>] is NULL
Informational
Failed to find index in config file list.
<Index> Index
FUJITSU PSWITCH
pSysapiSupportCfgTree[<Index>] is NULL
Informational
Failed to find index in support config file list.
<Index> Index
Remote Unit not ready yet
Informational
Remote Unit not ready yet.
Script file <FileName> : digital signature End Tag not present
Informational
Failed to get information for script file.
<FileName> Log is created by this file.
Script file <FileName> : Failed to get digital signature
Informational
Failed to get information for script file.
<FileName> Log is created by this file.
Script file <FileName> fopen error
886 December/2018
FUJITSU PSWITCH
Informational
Failed to open script file.
<FileName> Log is created by this file.
Message Collection
Send block <BlockCount>, got ACK for #<BlockCount>
Informational
Server ack block not match.
<BlockCount> Block count for tftp
Server error message is: <ErrorMessage> with error code::
<ErrorCode>
Informational
TFTP error.
<ErrorMessage>
<ErrorCode>
Error message
Error code
SIM failed to register for service port state notify.
Informational
Failed to register service port state notify function.
simAddrChangeEventNotify: Failed to notif registrar_ID
<ComponentID> addrType <SimAddrType> addrFamily <FamilyType>
Informational
Failed to notify the component.
<ComponentID> Component ID
<SimAddrType>
<FamilyType>
"SIM_ADDR_CHANGE_TYPE_NETWORK",
"SIM_ADDR_CHANGE_TYPE_SERVICEPORT" type indicate ipv4 or ipv6(ex. L7_AF_INET, L7_AF_INET6,...) or generic family type
simAddrChangeEventRegister: Invalid address family
Informational
Invalid address family.
simAddrChangeEventRegister: Invalid address type
December/2018 887
Message Collection
Informational
Invalid address type.
FUJITSU PSWITCH
simAddrChangeEventRegister: Invalid registrat ID <ComponentID>
Informational
Invalid registrat ID.
<ComponentID> Component ID
Some of licensed features are not found on the switch
Informational
Some of licensed features are not found on the switch.
Source IP Selection address is not supported for FTP and will be ignored!
Informational
Source IP Selection address is not supported for FTP and will be ignored!
Support configuration file on disk size <SizeValue> is less than expected size <FileSize>.
Informational
Invalid support configuration file size.
<SizeValue> An integer for a specific range or a limit value.
<FileSize> File size
Support configuration file size <FileSize> is toos small.
Informational
Invalid support configuration file size.
<FileSize> File size
support/debug Save call failed for component <ComponentID>,
<ComponentName>
888 December/2018
FUJITSU PSWITCH
Informational
Failed to call save notify function for component.
<ComponentID> Component ID
<ComponentName> Component name
Message Collection
supportRoutine is null for category <CagetoryID> and componentId
<ComponentID>, <ComponentName>
Informational
Failed to access support routine for category and component.
<CagetoryID> Cagetory ID
<ComponentID> Component ID
<ComponentName> Component name
sysapiCfgFilesSeparate: CRC check failed. <ChecksumValue> read and <ChecksumValue> calculated
Informational
Invalid CRC checksum value for config file.
<ChecksumValue> CRC checksum value
sysapiHpcNotify10GBASETPresence: 10GBASET ctrl is not supported
Informational
10GBASET ctrl is not supported.
sysapiHpcNotifySFP+Presence: SFP+ ctrl is not supported
Informational
SFP+ ctrl is not supported.
sysapiHpcNotifyXFPPresence: XFP ctrl is not supported
Informational
XFP ctrl is not supported.
sysapiNvstoreCfgChangeSema create failed.
December/2018 889
Message Collection
Informational
Failed to create semaphore.
sysapiRegistryGet failed
Informational
Failed to pull a value out of the registry.
sysapiRegistryPut failed
Informational
Failed to put a value into the registry.
FUJITSU PSWITCH
sysapiSupportCfgFileSeparate: CRC check failed. <ChecksumValue> read and <ChecksumValue> calculated
Informational
Invalid CRC checksum value for support config file.
<ChecksumValue> CRC checksum value
SYSNET Deregistration Failed
Informational
Failed to deregister the PDU callback function.
SYSNET Registration already exists
Informational
The PDU callback function already exists.
SYSNET Registration Failed
Informational
Failed to register the PDU callback function.
SYSNET Unknown Entry Type
890 December/2018
FUJITSU PSWITCH
Informational
Invalid SYSNET type.
Message Collection
SYSNET: Invalid Registration Function
Informational
Invalid Registration Function.
System time is changed from <TimeValue> to <TimeValue>
Informational
System time is changed.
<TimeValue> Time Value
Tech Support Registration failed for System related commands
Informational
Tech Support Registration failed for System related commands.
TFTP Timeout <TimeValue> no ACK from TFTP server... resending block
Informational
TFTP Timeout no ACK from TFTP server.
<TimeValue> Time Value
TFTP Timeout no ACK from TFTP server... aborting transfer
Informational
TFTP Timeout no ACK from TFTP server.
TFTP Timeout no reply from TFTP server
Informational
TFTP Timeout no reply from TFTP server.
tftp_get(): Failed to create socket
December/2018 891
Message Collection
Informational
Failed to create socket.
tftp_get(): Invalid Address family
Informational
Invalid Address family.
tftp_get(): Send to error
Informational
TFTP socket send error.
tftp_put(): Bind error
Informational
TFTP socket bind error.
tftp_put(): Failed to create socket
Informational
Failed to create socket.
tftp_put(): recv from error
Informational
TFTP socket recv error.
tftp_put(): Send to error
Informational
TFTP socket send error.
tftpGetReplyProcess(): Invalid Address family
Informational
Invalid Address family.
tftpGetReplyProcess(): Recv from error
FUJITSU PSWITCH
892 December/2018
FUJITSU PSWITCH
Informational
TFTP socket recv error.
Message Collection
tftpGetReplyProcess(): TFTP client has received non TFTP reply
Informational
TFTP client has received non TFTP reply.
tftpRequestSend(): Send to error. Errno(<ErrorCode>)
Informational
TFTP socket send error.
<ErrorCode> Error code
tftpSocketPrepare(): Bind error
Informational
TFTP socket bind error.
tftpSocketPrepare(): Failed to create socket.
Informational
Failed to create socket.
tftpSocketPrepare(): Invalid Address family
Informational
Invalid Address family.
tftpSocketPrepare(): osapiSetsockopt SO_REUSEADDR failed
Informational
REUSEADDR failed.
tftpSocketPrepare(): Set socket IP_MULTICAST_TTL option error
Informational
IP_MULTICAST_TTL option error.
tftpSocketPrepare(): Set socket L7_IP_TTL option error
December/2018 893
Message Collection
Informational
IP_TTL option error.
FUJITSU PSWITCH
tftpSocketPrepare(): Set socket SO_BROADCAST option error
Informational
SO_BROADCAST option error.
tlvCtrlBlockInit: TLV control pointer parm is null.
Informational
TLV control pointer parm is null.
Unable to create helperTimer semaphore()
Informational
Failed to create semaphore.
Unable to create SYSNET PDU Hook semaphore
Informational
Failed to create semaphore.
Unable to delete trace block semaphore, id=<SemaphoreID>
Informational
Failed to delete semaphore.
<SemaphoreID> Semaphore ID
Unable to get buffer for category <CagetoryID>, component
<ComponentID>, <ComponentName>, routine <RoutineName>
Informational
Failed to get buffer.
<CagetoryID>
<ComponentID>
Cagetory ID
Component ID
<ComponentName> Component name
<RoutineName> Routine name
Unable to initialize async event handler utility
894 December/2018
FUJITSU PSWITCH
Informational
Unable to initialize async event handler utility.
Unexpected file name: <FileName>
Informational
Unexpected file name.
<FileName> Log is created by this file.
Unit manager not present
Informational
Unit manager not present.
Unit not ready yet
Informational
Unit not ready yet.
Unrecognized big config file version <Version>
Informational
Unrecognized big config file.
<Version> Version
Message Collection
Unrecognized big support config file version <Version>
Informational
Unrecognized big support config file.
<Version> Version
Version Check Failed
Informational
Version Check Failed.
we reached the maximum number (<MaxValue>) of buffer pools
December/2018 895
Message Collection
Informational
Buffer pools is full.
<MaxValue> Maximum value
FUJITSU PSWITCH
Wrong protocol used
Informational
Wrong protocol.
Wrong value for TFTP command
Informational
Wrong value for TFTP command.
Wrong value of mode entered
Informational
Enter wrong mode.
Network port IPv4 address has been set to <IPAddress>.
Notice
Network port IPv4 address has been set.
<IPAddress> ip_address, or, ipv6_address, or hostname
DHCP assigned IPv4 address <IPAddress> to network port, but network port already has configured address <IPAddress>.
Notice
Network port IPv4 address already configured.
<IPAddress> ip_address, or, ipv6_address, or hostname
<FunctionName>: Unable to allocate static Neighbor Table tree heap
Notice
Failed to allocate Neighbor Table.
<FunctionName> Log is created by this function.
<FunctionName>: Unable to allocate static Neighbor Table data heap
896 December/2018
FUJITSU PSWITCH
Notice
Failed to allocate Neighbor Table.
<FunctionName> Log is created by this function.
Message Collection
Could not delete AVL tree simCfgNbrTbl semaphore, id=<SemaphoreID>
Notice
Failed to delete semaphore.
<SemaphoreID> Semaphore ID
DHCP assigned IPv4 address <IPAddress> to service port, but service port already has configured address <IPAddress>.
Notice
Service port IPv4 address already configured.
<IPAddress> ip_address, or, ipv6_address, or hostname
Service port IPv4 address has been set to <IPAddress>.
Notice
Service port IPv4 address has been set.
<IPAddress> ip_address, or, ipv6_address, or hostname
Unable to register to DTL for CPU traffic counter updates
Notice
Failed to register callback function for CPU traffic counter update.
Unable to create CPU traffic counters
Notice
Failed to create CPU traffic counters.
Switch firmware operational: <SystemDescription>
December/2018 897
Message Collection
Notice
FUJITSU PSWITCH
Show the system information.
<SystemDescription> Hardware and software informations about system.
Save Config registrar_ID <ComponentID> greater then the
LAST_COMPONENT_ID
Notice
Invalid component id for register save config callback function.
<ComponentID> Component ID
Save Config Register: registrar_ID <ComponentID> already registered
Notice
The component id is already registered.
<ComponentID> Component ID
Save Config unregister: registrar_ID <ComponentID> greater then the LAST_COMPONENT_ID
Notice
Invalid component id for unregister save config callback function.
<ComponentID> Component ID
Save Config unregister: registrar_ID <ComponentID> already unregistered
Notice
The component id is already unregistered.
<ComponentID> Component ID
Building defaults for file <FileName>. A component's configuration file does not exist or the file's checksum is incorrect so the component's default configuration file is built.
898 December/2018
FUJITSU PSWITCH
Notice
Message Collection
Failed to open component configuration file and build default configuration.
<FileName> Log is created by this file.
Error on call to osapiFsWrite routine on file <FileName>. Either the file can not be opened or the OS's file I/O returned an error trying to write to the file.
Notice
Failed to write file.
<FileName> Log is created by this file.
File <FileName> corrupted from file system. Checksum mismatch. The calculated checksum of a component's configuration file in the file system did not match the checksum of the file in memory.
Notice
Invalid component configuration file checksum.
<FileName> Log is created by this file.
Building defaults for file <FileName>. A component's configuration file does not exist or the file's checksum is incorrect so the component's default configuration file is built.
Notice
Invalid component configuration file and building default configuration.
<FileName> Log is created by this file.
could not separate <FileName>. The configuration file could not be read. This message may occur on a system for which no configuration has ever been saved or for which configuration has been erased.
Notice
Failed to read configuration file.
<FileName> Log is created by this file.
Configuration file <FileName> size is 0 (zero) bytes. The configuration file could not be read. This message may occur on a system for which no configuration has ever been saved or for which configuration has been erased.
December/2018 899
Message Collection
Notice
Failed to read configuration file.
<FileName> Log is created by this file.
FUJITSU PSWITCH
Building defaults for file <FileName> version <Version>.
Configuration did not exist or could not be read for the specified feature or file. Default configuration values will be used. The file name and version are indicated..
Notice
Failed to open component configuration file and build default configuration.
<FileName> Log is created by this file.
<Version> Version
Message <HpcMessage> send to NIM failed with rc <ErrorCode>
Notice
Failed to send message to NIM.
<HpcMessage> Hardware platform control message
<ErrorCode> Error code
Remote Message <HpcMessage> send to NIM failed with rc <ErrorCode>
Notice
Failed to remote to send message to NIM.
<HpcMessage> Hardware platform control message
<ErrorCode> Error code
MBUF utilization exceeds Rising threshold of <GetValue> percent
Notice
MBUF utilization exceeds rising threshold.
<GetValue> Get Value
MBUF utilization falls below Falling threshold of <GetValue> percent
900 December/2018
FUJITSU PSWITCH
Notice
MBUF utilization falls below falling threshold.
<GetValue> Get Value
Failed to allocate memory
Warning
Failed to allocate memory.
Failed to open <FileName>
Warning
Failed to open file.
<FileName> Log is created by this file.
Failed to read file <FileName>
Warning
Failed to read file.
<FileName> Log is created by this file.
2.1.65.
SNMP
Message Collection
Flavor of Linux is <LinuxDistribution>. SNMPD retcode =
<ErrorCode>
Debug
Executes Linux command than show return code.
<LinuxDistribution> "CentOS", "Ubuntu" ...
<ErrorCode> Error code
Registration failed for <MibName> MIB (<OID>)
December/2018 901
Message Collection
Debug
FUJITSU PSWITCH
Failed to add MIB information to SNMP supported database, because of invalid
MIB name or OID.
<MibName> Mib name
<OID> Mib OID
snmpd is <Operation>. snmpd service is running.
Debug
Executes Linux command to SNMP package, and show current state.
<Operation> Operation, "Add", "Remove", "Up", "Down", "Enable",
"Disable" …
Anamoly writing to pipe <SetValue>. SNMP server port configuration change may not have been activated.
Error
Failed to change SNMP server port, because of pipe file doesn't exist. The SNMP agent cannot receive event of port change.
<SetValue> Set Value
Anamoly writing to pipe <SetValue>. SNMP trap port configuration change may not have been activated.
Error
Failed to change SNMP server port, because of pipe file doesn't exist. The SNMP agent cannot receive event of port change.
<SetValue> Set Value
SNMP package is not installed. Please install the requisite package.
Error
Executes Linux command to SNMP package, but the SNMP package is not installed.
Error on call to osapiFsWrite routine on config file <FileName>
902 December/2018
FUJITSU PSWITCH
Informational
Failed to save SNMP configuration to file system.
<FileName> Log is created by this file.
Message Collection
Error on call to sysapiCfgFileWrite routine on config file
<FileName>
Informational
Unable to save SNMP configuration to NVRAM.
<FileName> Log is created by this file.
Failed to Create SNMP Cable Test Task.
Informational
Failed to Create SNMP Task, because of task has existed or software bug occurs.
Failed to Create SNMP Config Task.
Informational
Failed to Create SNMP Task, because of task has existed or software bug occurs.
Failed to create SNMP proc monitoring task
Informational
Failed to Create SNMP Task, because of task has existed or software bug occurs.
Failed to Create SNMP Task.
Informational
Failed to Create SNMP Task, because of task has existed or software bug occurs.
Failed to Create SNMP Trap Task.
Informational
Failed to Create SNMP Task, because of task has existed or software bug occurs.
SNMP Could not deliver Trap: <TrapID>
December/2018 903
Message Collection
Informational
Failed to send SNMP trap packets.
<TrapID> Trap ID
FUJITSU PSWITCH
SNMP server bind to port <InterfaceNumber> successful.
Informational
SNMP agent opens socket and binds server port successfully.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
SNMP User restore returned failure.
Informational
Failed to restore SNMPv3 user configuration depend on user management database. It may be user management module is not ready.
SNMP default trap send port changed from <InterfaceNumber> to
<InterfaceNumber>.
Notice
SNMP agent changes trap port successfully.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
SNMP server port changed from <InterfaceNumber> to
<InterfaceNumber>.
Notice
SNMP agent changes server port successfully.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Cannot bind SNMP server to port <InterfaceNumber> (perhaps in use?). Auto retry every <TimeValue> seconds.
904 December/2018
FUJITSU PSWITCH
Warning
Message Collection
SNMP agent cannot bind server port. The specific server port may be in used.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<TimeValue>
0/1, 0/0/1
Time Value
snmpd is <Operation>. snmpd service is NOT running and will need to be started.
Warning
Executes Linux command to SNMP package, but the SNMP package is not running.
<Operation> Operation, "Add", "Remove", "Up", "Down", "Enable",
"Disable" …
2.1.66.
SNOOPING
Failed to send NIM startup phase <NimStartupPhaseNumber> to
Snooping thread.
Alert
Snooping massage queue being full.
<NimStartupPhaseNumber> NIM startup phase number
Received unknown NIM intIfState <State>.
Alert
Gets the active of the specified interface, but the type is unknown.
<State> State
snooping failed to register for ip map routing change callbacks.
Alert
Register forIP routing callback has error.
snooping failed to register for mcast admin mode change callbacks.
December/2018 905
Message Collection
Alert
Register for multicast admin callback has error.
FUJITSU PSWITCH
Error on call to sysapiSupportCfgFileWrite routine on config file
<FileName>.
Debug
Write the snooping config has error.
<FileName> Log is created by this file.
Failed for interface index:<InterfaceNumber>, <InterfaceNumber> vlan:<VlanID>.
Debug
Fail to forward packet to given interface.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<VlanID> VLAN ID
Snooping Create Startup done.
Debug
IGMP Report received on interface <InterfaceNumber> for group
<GroupID> on VLAN:<VlanID> is supressed.
Debug
Received the report packet, but it need be supressed.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<GroupID>
<VlanID>
Group ID
VLAN ID
IGMP Snooping Debug config restore failed.
Debug
Failed to apply Snooping Debug config data for a specified snoop instance.
MLD Snooping Debug config restore failed.
906 December/2018
FUJITSU PSWITCH
Debug
Message Collection
Failed to apply Snooping Debug config data for a specified snoop instance.
Failed to get snooping execution block to clear L3 group addresses from checkpoint database.
Error
Get the Snoop Execution block is fail.
App Timer Initialization Failed.
Error
Allocate the memory to app timer has error.
Could not create task snoopTask.
Error
Snooping task create fail.
Could not get peer-link Block Mask information. Hence *not* flooding the multicast control packet in ingress VLAN <VlanID>
Error
Fail to get the interface mask on which traffic ingressing peer-link is not allowed to egress out.
<VlanID> VLAN ID
Entry App Timer ctrl blk list alloc Failed.
Error
App timer entry allocate has error.
Error accessing Snooping config data for interface
<InterfaceNumber>, <InterfaceNumber>, family <FamilyType> cbIndex
<Index>.
December/2018 907
Message Collection
Error
FUJITSU PSWITCH
Fail to get the snooping confug data.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<FamilyType>
<Index>
0/1, 0/0/1 type indicate ipv4 or ipv6(ex. L7_AF_INET, L7_AF_INET6,...) or generic family type
Index
Error adding interface <InterfaceNumber> as mrouter port for
<<IPAddress>, <IPAddress>, <VlanID>> entry.
Error
Fail to add a specified port to mrouter port list to the specified <S,G,V> membership entry.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<IPAddress>
<VlanID> ip_address, or, ipv6_address, or hostname
VLAN ID
Error allocating buffer for source record. Hence not adding
<IPAddress> to record <group - <IPAddress> vlan - <VlanID>>.
Error
Fail to allocate to memory to SSM source record buffer pool.
<IPAddress> ip_address, or, ipv6_address, or hostname
<VlanID> VLAN ID
Error allocating buffers for timers.
Error
Create the snooping timer buffer pool has memory allocatie fail.
Error allocating data for mrouter timer AVL Tree.
Error
Insert the node to mrouter timer AVL Tree has error.
Error allocating data for oper data AVL Tree.
908 December/2018
FUJITSU PSWITCH
Error
Create Heap for VlanInfo AVL tree has insert node problem.
Message Collection
Error allocating data for snoop AVL Tree.
Error
Create Heap for AVL tree has memory allocate error.
Error allocating data for SSM Group Record AVL Tree.
Error
Insert the node to SSM Group Record AVL Tree has error.
Error allocating Handle List Buffers.
Error
Allocate the memory to Timer Handle List has error.
Error deleting group record <<IPAddress> <InterfaceNumber>
<VlanID>>.
Error
Fail to clears the group Info learned on given vlan and interface
<IPAddress> ip_address, or, ipv6_address, or hostname
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<VlanID>
0/1, 0/0/1
VLAN ID
Error deleting interface <InterfaceNumber> as mrouter port for
<<IPAddress>, <IPAddress>, <VlanID>> entry.
Error
Fail to delete a specified port to mrouter port list to the specified <S,G,V> membership entry.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<IPAddress>
<VlanID>
0/1, 0/0/1 ip_address, or, ipv6_address, or hostname
VLAN ID
Error updating <*, <IPAddress>, <VlanID>> entry's forwarding interface list in hardware.
December/2018 909
Message Collection
Error
FUJITSU PSWITCH
Fail to adds or updates a multicast forwarding entry in the multicast forwarding list in the network processor.
<IPAddress> ip_address, or, ipv6_address, or hostname
<VlanID> VLAN ID
Error! Cannot change the Admin Mode for IGMP Querier Snooping on
Auto-Video VLAN while Auto-Video feature is enabled.
Error
Failed to add port <InterfaceNumber> to vlan <VlanID>.
Error
Can't sets port participation in the snooping VLAN
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<VlanID>
0/1, 0/0/1
VLAN ID
Failed to add the intf <InterfaceNumber> to the vlan <VlanID>.
Error
Fail to set VLAN port membership.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<VlanID>
0/1, 0/0/1
VLAN ID
Failed to allocate memory for handle list.
Error
The SSM timer handler list doing memory allocate has error occur.
Failed to allocate memory for L3 checkpoint database in Snooping.
Error
To create the L3 Tree on snooping execution block has error.
Failed to allocate memory for snoop L3 database.
910 December/2018
FUJITSU PSWITCH
Error
To allocate the L3 Tree on snooping execution block has error.
Message Collection
Failed to allocate memory for Snooping timer buffers.
Error
Initlize snooping timer buffer has memory allocate error.
Failed to allocate memory for snoopIntfInfo.
Error
Create the snooping interface info buffer pool has memory allocatie fail.
Failed to allocate memory for snoopIntfMapTbl.
Error
Create the snooping interface map table buffer pool has memory allocatie fail.
Failed to allocate memory for SSM AppTimer buffers.
Error
The SSM source app timer buffer allocate memory has error occur.
Failed to allocate memory for SSM source record buffers.
Error
The SSM source record buffer allocate memory has error occur.
Failed to create timer linked list.
Error
Create the snooping timer of a single linked list has error occur.
Failed to delete the intf <InterfaceNumber> from the vlan
<VlanID>.
December/2018 911
Message Collection
Error
FUJITSU PSWITCH
Fail to set VLAN port membership.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<VlanID>
0/1, 0/0/1
VLAN ID
Failed to get IGMP querier admin mode.
Error
Gets the snooping querier admin has error.
Failed to get IGMP querier vlan mode.
Error
Gets the snooping querier admin on some vlanshas error.
Failed to get IGMP snooping admin mode.
Error
Gets the Snooping admin mode has error.
Failed to get IGMP snooping vlan mode.
Error
Gets the snooping admin mode on some vlans has error.
Failed to get multicast address filtering.
Error
Gets the snooping filter status has error.
Failed to get VLAN port membership for port <InterfaceNumber> vlan
<VlanID>.
912 December/2018
FUJITSU PSWITCH
Error
Message Collection
Fail to get the operational VLAN port membership.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<VlanID>
0/1, 0/0/1
VLAN ID
Failed to release the semaphore of snooping message queue for the event: <Dot1sEvent> mstID: <ID> VlanId: <VlanID> Interface:
<InterfaceNumber>.
Error
Snooping massage queue being full.
<Dot1sEvent> "L7_DOT1S_EVENT_FORWARDING",
<ID>
"L7_DOT1S_EVENT_TOPOLOGY_CHANGE"...
ID
<VlanID> VLAN ID
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to update Max Response Expiry Timer for vlan <VlanID> family
<FamilyType>.
Error
Fail to update the specified querier timer with specified time period and allocates related timer nodes.
<VlanID> VLAN ID
<FamilyType> type indicate ipv4 or ipv6(ex. L7_AF_INET, L7_AF_INET6,...) or generic family type
Interface structure already exists for interface
<InterfaceNumber>, <InterfaceNumber> when L7_CREATE event received.
Error
Received the create message but the interface structure is exist.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Memory insufficient for snoop configuration structure.
December/2018 913
Message Collection
Error
FUJITSU PSWITCH
The snooping configuration structure be allocate memory has error occur.
Memory insufficient for snoop debug configuration structure.
Error
The snooping debug configuration structure be allocate memory has error occur.
snoopCB Allocation failed.
Error
Initialize snooping control block has error.
snoopCB[<Index>] Allocation failed.
Error
Allocate snooping control block has error.
<Index> Index
snoopEBInit failed.
Error
Initialize snooping execution block has error.
snoopIntfCreate Failure for snoopMapIntfConfigEntryGet for interface <InterfaceNumber>, <InterfaceNumber> family
<FamilyType> cbIndex <Index>
Error
Can't get the this configure entry.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<FamilyType>
<Index>
0/1, 0/0/1 type indicate ipv4 or ipv6(ex. L7_AF_INET, L7_AF_INET6,...) or generic family type
Index
SSM App Timer Initialization Failed.
914 December/2018
FUJITSU PSWITCH
Error
Initialize the SSM app timer has error occur.
Unable to create handle list.
Error
The SSM timer handler list create fial.
Unable to create snoop message queue semaphore.
Error
Create message queue semaphore has error.
Message Collection
Unable to create timer handle list.
Error
Initialize the Timer Handle List has error.
Unable to initialize snoopTask.
Error
Snooping task initailize fail.
Unable to register for dot1s interface change callback.
Error
Register for dot1s callback has error.
Unable to register for VLAN change callback.
Error
Register for vlan callback has error.
Unable to register with NIM.
Error
Register for NIM module has error.
Unable to register with sysNetPdu.
December/2018 915
Message Collection
Error
Register for a PDU hook has error.
FUJITSU PSWITCH
Unknown NIM startup event <NimStartupPhaseNumber>.
Error
The NIM start up event is unknown event.
<NimStartupPhaseNumber> NIM startup phase number
Received an invalid igmp packet with ipheader lenth
<IPHeaderLength> packet buffer length <PacketLength>.
Error
Received the IGMP packet has the error.
<IPHeaderLength> IP header length
<PacketLength> Packet length
Failed to send group specific query.
Informational
send the group specific query has error.
Could not get dot1ad interface type for interface:<InterfaceNumber>.
Informational
Fail to get the Dot1ad interface type.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Could not get dot1ad interface type for interface:<InterfaceNumber>.
Informational
Fail to get the Dot1ad interface type.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Could not get dvlan ethertype for interface:<InterfaceNumber>.
916 December/2018
FUJITSU PSWITCH
Informational
Message Collection
Fail to get the ethertype for the double vlan tagg for this interface.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Could not get MBUF.
Informational
Fail to get the multicast network buffer.
Could not get service type for svid:<VlanID>.
Informational
Fail to get the service type for a given dot1ad service.
<VlanID> VLAN ID
Could not get subscription details on interface:<InterfaceNumber> vlan:<VlanID>.
Informational
Fail to get the node on dot1ad subscription tree.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<VlanID> VLAN ID
Error adding interface <InterfaceNumber> as mrouter port for
<<IPAddress>, <IPAddress>, <VlanID>> entry.
Informational
Fail to starts the specified querier timer with specified time period and allocates related timer nodes.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<IPAddress>
<VlanID> ip_address, or, ipv6_address, or hostname
VLAN ID
Failed to apply admin mode <State> family <FamilyType>.
December/2018 917
Message Collection
Informational
FUJITSU PSWITCH
The apply mode type is invalid.
<State> State
<FamilyType> type indicate ipv4 or ipv6(ex. L7_AF_INET, L7_AF_INET6,...) or generic family type
Failed to disable querier on vlan <VlanID> family <FamilyType>
Informational
Fail to apply snoop querier Vlan admin mode
<VlanID> VLAN ID
<FamilyType> type indicate ipv4 or ipv6(ex. L7_AF_INET, L7_AF_INET6,...) or generic family type
Failed to post a message to queue.
Informational
IGMP snooping massage queue being full.
Failed to process other querier message.
Informational
To process the query packet but find it is from invalid vlan.
Failed to remove group membership.
Informational
Deletes an interface from the port list of the multicast address entry has problem.
Failed to remove group membership.
Informational
The multicast socket send packet has error.
Failed to send snooping table flush.
Informational
IGMP snooping massage queue being full.
Failed to set global snooping querier mode to <State> .
918 December/2018
FUJITSU PSWITCH
Informational
IGMP snooping massage queue being full.
<State> State
Message Collection
Failed to set snooping querier election mode <State> for vlan
<VlanID>.
Informational
IGMP snooping massage queue being full.
<State> State
<VlanID> VLAN ID
Failed to set snooping querier mode <State> for vlan <VlanID>.
Informational
IGMP snooping massage queue being full.
<State> State
<VlanID> VLAN ID
Failed to set snooping querier version to <Version>.
Informational
IGMP snooping massage queue being full.
<Version> Version
Failed to start Querier Expiry Timer for vlan <VlanID> family
<FamilyType>
Informational
The error occur at time to start the specified querier timer with specified time period and allocates related timer nodes.
<VlanID> VLAN ID
<FamilyType> type indicate ipv4 or ipv6(ex. L7_AF_INET, L7_AF_INET6,...) or generic family type
Failed to stop Query Timer for vlan <VlanID> family <FamilyType>.
December/2018 919
Message Collection
Informational
FUJITSU PSWITCH
To stop the specified querier timer has error.
<VlanID> VLAN ID
<FamilyType> type indicate ipv4 or ipv6(ex. L7_AF_INET, L7_AF_INET6,...) or generic family type
Failed to update Querier Expiry Timer for vlan <VlanID> family
<FamilyType>
Informational
Fail to update the specified querier timer with specified time period and allocates related timer nodes.
<VlanID> VLAN ID
<FamilyType> type indicate ipv4 or ipv6(ex. L7_AF_INET, L7_AF_INET6,...) or generic family type
Invalid family passed.
Informational
Build the snooping default config has family type error.
Invalid IPv4Address.
Informational
The given ipv4 address is invalid.
Invalid IPv6Address.
Informational
The given ipv6 address is invalid.
Invalid vlan <VlanID>
Informational
To process the query packet but find it is from invalid vlan.
<VlanID> VLAN ID
Not sending the proxy query in response to leave report received on interface <InterfaceNumber> vlan <VlanID> as sending proxy query is disabled.
920 December/2018
FUJITSU PSWITCH
Informational
Message Collection
Checks whehter to send IGMP/MLD proxy query, and find not sending in current configuration.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<VlanID>
0/1, 0/0/1
VLAN ID
Snooping Querier is moved to an invalid state.
Informational
Find the bad message when process snooping querier event.
Failed to add the snooping interface.
Informational
Adds an interface to the port list of the multicast address entry has error.
Snooping SSM Group Entry Creation Failed; grpAddr - <IPAddress>, interfaceName - <InterfaceNumber> VLAN - <VlanID> The specified
Group Address registration on the specified interface and VLAN failed.
Notice
Fail to inserts SSM source record into avl tree.
<IPAddress> ip_address, or, ipv6_address, or hostname
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<VlanID> VLAN ID
Failed to set querier vlan mode vlan <VlanID> family <FamilyType> mode <State>.
Warning
Fail to apply snoop querier vlan admin mode.
<VlanID> VLAN ID
<FamilyType>
<State> type indicate ipv4 or ipv6(ex. L7_AF_INET, L7_AF_INET6,...) or generic family type
State
Interface vlan mode apply failed for interface <InterfaceNumber> vlan <VlanID> family <FamilyType>
December/2018 921
Message Collection
Warning
FUJITSU PSWITCH
Can't apply Snooping operational mode for the specified interface and VLAN of a snoop
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<VlanID>
<FamilyType>
0/1, 0/0/1
VLAN ID type indicate ipv4 or ipv6(ex. L7_AF_INET, L7_AF_INET6,...) or generic family type
Failed to send message <Operation> flooding of unknown multicast traffic on all ports. rc == <ErrorCode>.
Warning
Snooping massage queue being full.
<Operation>
<ErrorCode>
Operation, "Add", "Remove", "Up", "Down", "Enable",
"Disable" …
Error code
Bad rc <ErrorCode> in snoopNotifyRegisteredUsers for registrar
<SnoopingRegistrarIndex>
Warning
Notify registered users of registered event request, and response is bad end.
<ErrorCode> Error code
<SnoopingRegistrarIndex> The index for snooping registration
Control block pointer is NULL. Unable to process source timer expiry event.
Warning
Snooping control block is not exist.
Could not add new timer data node.
Warning
Fail to add a timer node to the single linked list.
Could not get the handle node to store the expiry timer data.
922 December/2018
FUJITSU PSWITCH
Warning
Message Collection
The handler node doesn't store the max response expiry timer data.
Could not get the handle node to store the mrtr timer data.
Warning
The multicast router port timer doesn't store the the handle node.
Could not get the handle node to store the timer data.
Warning
The timer date doesn't store and handler node.
Could not start Max Response Expiry Timer for vlan <VlanID> family
<FamilyType>
Warning
Fail to create the max response expiry timer.
<VlanID> VLAN ID
<FamilyType> type indicate ipv4 or ipv6(ex. L7_AF_INET, L7_AF_INET6,...) or generic family type
Could not start Querier Expiry timer for vlan <VlanID> family
<FamilyType>
Warning
Fail to create the querier expiry timer to app timer.
<VlanID> VLAN ID
<FamilyType> type indicate ipv4 or ipv6(ex. L7_AF_INET, L7_AF_INET6,...) or generic family type
Could not start Query interval for vlan <VlanID> family
<FamilyType>.
Warning
To add the query interval timer to app timer has error.
<VlanID> VLAN ID
<FamilyType> type indicate ipv4 or ipv6(ex. L7_AF_INET, L7_AF_INET6,...) or generic family type
Could not Start the Group timer.
December/2018 923
Message Collection
Warning
Not exist group timer in the timer data structure.
Could not Start the mrtr timer.
Warning
Can't found the multicast router port timer node.
Could not start timer. Insufficient memory.
Warning
To allocate the timer buffer pool has error.
FUJITSU PSWITCH
Error allocating large buffers. Could not allocate buffers for large IGMP packets.
Warning
Create the snooping large buffer pool has memory allocatie fail.
Error allocating Med buffers. Could not allocate buffers for Med
IGMP packets.
Warning
Create the snooping medium buffer pool has memory allocatie fail.
Error allocating small buffers. Could not allocate buffers for small IGMP packets.
Warning
Create the snooping small buffer pool has memory allocatie fail.
Error enabling global admin mode for family <FamilyType>.
Warning
Applies the snoopingglobal admin mode of a snoop instance has error.
<FamilyType> type indicate ipv4 or ipv6(ex. L7_AF_INET, L7_AF_INET6,...) or generic family type
Error enabling interface admin mode for family <FamilyType>.
924 December/2018
FUJITSU PSWITCH
Warning
Message Collection
Applies the snooping interfacet admin mode of a snoop instance has error.
<FamilyType> type indicate ipv4 or ipv6(ex. L7_AF_INET, L7_AF_INET6,...) or generic family type
Error on call to sysapiCfgFileWrite file <FileName>.
Warning
write the snooping config has error.
<FileName> Log is created by this file.
Error retrieving config sysapiCfgFileGet.
Warning
Fail to get the snooping configuration file.
Error updating <<IPAddress>, <IPAddress>, <VlanID>> entry's forwarding interface list with that of L2 forwarding interface list.
Warning
Fail to adds or updates a multicast forwarding entry in the multicast forwarding list in the network processor.
<IPAddress> ip_address, or, ipv6_address, or hostname
<VlanID> VLAN ID
Error while removing entries for vlan <VlanID> from snoop tree.
Warning
Can't remove snoop entries with the specified VLAN of a snoop instance
<VlanID> VLAN ID
Failed to <Operation> report Suppression Mode for VLAN:<VlanID> due to message queue being full.
December/2018 925
Message Collection
Warning
FUJITSU PSWITCH
Snooping massage queue being full.
<Operation> Operation, "Add", "Remove", "Up", "Down", "Enable",
<VlanID>
"Disable" …
VLAN ID
Failed to add vlan id <VlanID> family <FamilyType>.
Warning
Some error in avl tree addition.
<VlanID> VLAN ID
<FamilyType> type indicate ipv4 or ipv6(ex. L7_AF_INET, L7_AF_INET6,...) or generic family type
Failed to apply configuration intf <InterfaceNumber> vlan
<VlanID> family <FamilyType>.
Warning
Applies Snooping operational mode for the specified interface and VLAN of a snoop has error occur.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<VlanID>
<FamilyType>
0/1, 0/0/1
VLAN ID type indicate ipv4 or ipv6(ex. L7_AF_INET, L7_AF_INET6,...) or generic family type
Failed to apply mode intf <InterfaceNumber> vlan <VlanID> family
<FamilyType>.
Warning
Applies Snooping operational mode for the specified interface and VLAN has error occur.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<VlanID>
<FamilyType>
VLAN ID type indicate ipv4 or ipv6(ex. L7_AF_INET, L7_AF_INET6,...) or generic family type
Failed to apply mode intf <InterfaceNumber> vlan <VlanID> family
<FamilyType>.
926 December/2018
FUJITSU PSWITCH
Warning
Message Collection
Applies Snooping operational mode for the specified interface and VLAN of a snoop has error occur.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<VlanID>
<FamilyType>
0/1, 0/0/1
VLAN ID type indicate ipv4 or ipv6(ex. L7_AF_INET, L7_AF_INET6,...) or generic family type
Failed to attach intf <InterfaceNumber> family <FamilyType>.
Warning
Can't apply the Snooping mode for the specified interface in ll VLANs
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<FamilyType>
0/1, 0/0/1 type indicate ipv4 or ipv6(ex. L7_AF_INET, L7_AF_INET6,...) or generic family type
Failed to delete group timer node.
Warning
Fail to delete the snooping specifed timer node.
Failed to delete mrtr timer node.
Warning
Fail to delete the timer node on the tree.
Failed to delete port from MFDB.
Warning
To delete ports from a VLANID-MAC entry in MFDB table has problem occur.
Failed to delete the vlan map index for vlan <VlanID>.
Warning
Can't delete a snoop operational entry for specified vlan.
<VlanID> VLAN ID
Failed to delete timer.
December/2018 927
Message Collection
Warning
Fail to delete the group timer on Snooping control block.
FUJITSU PSWITCH
Failed to destroy the timer linked list.
Warning
Delete the timer node of the single linked list has error occur.
Failed to detach intf <InterfaceNumber> family <FamilyType>.
Warning
Can't apply the Snooping mode for the specified interface in ll VLANs
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<FamilyType>
0/1, 0/0/1 type indicate ipv4 or ipv6(ex. L7_AF_INET, L7_AF_INET6,...) or generic family type
Failed to enabled querier vlan mode vlan <VlanID> family
<FamilyType>.
Warning
Apply snoop querier Vlan admin mode has error occur.
<VlanID> VLAN ID
<FamilyType> type indicate ipv4 or ipv6(ex. L7_AF_INET, L7_AF_INET6,...) or generic family type
Failed to find recently added entry in snoopTree.
Warning
The entry is not exist in snooping tree.
Failed to give msgQueue semaphore.
Warning
Give the snooping semaphore has error.
Failed to post message event <ID> intf <InterfaceNumber>.
928 December/2018
FUJITSU PSWITCH
Warning
Message Collection
Snooping massage queue being full.
<ID> ID
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to post message. msgqueue is full.
Warning
IGMP snooping massage queue being full.
Failed to read configuration file.
Warning
When reload the configuration file.
Failed to remove interface from snoop entry.
Warning
Fail to deletes an interface from the port list of the multicast address entry and stops the corresponding timer.
Failed to remove interface from snoop entry.
Warning
Fail to remove an interface from the mcast router list and of all snooping entries of a snoop instance.
Failed to remove snoop entry.
Warning
Removes an Multicast MAC group membership entry has error occur.
Failed to re-start mrtr timer.
Warning
Fail to restart the multicast router port timer.
Failed to retrieve handle.
December/2018 929
Message Collection
Warning
FUJITSU PSWITCH
Can't found the multicast router port timer data on handler list.
Failed to retrieve handle. Unable to process source timer expiry event.
Warning
Not exist the SSM timer node in handle list retrieve.
Failed to retrieve handle. Unable to process V1 Host timer expiry event.
Warning
Not exist the SSM group record in handle list retrieve.
Failed to retrieve handle. Unable to process V2 Host timer expiry event.
Warning
Not exist the SSM group record in handle list retrieve.
Failed to send L3-Mcast Operational Status change notify.
Warning
Snooping massage queue being full.
Failed to send mcast entry notify.
Warning
Snooping massage queue being full.
Failed to send MFDB notify.
Warning
MFDB notify massage queue being full.
Failed to set global igmp snooping mode to <State>. Failed to set global IGMP Snooping mode due to message queue being full.
930 December/2018
FUJITSU PSWITCH
Warning
IGMP snooping massage queue being full.
<State> State
Message Collection
Failed to set igmp mrouter mode <State> for interface
<InterfaceNumber>. Failed to set interface muticast router mode due to IGMP Snooping message queue being full.
Warning
IGMP snooping massage queue being full.
<State> State
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to set igmp mrouter timer <SetValue> for interface
<InterfaceNumber>. Failed to set interface muticast router timer due to IGMP Snooping message queue being full.
Warning
IGMP snooping massage queue being full.
<SetValue> Set Value
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to set igmp mrouter timer <SetValue> for VLAN ID <VlanID>.
Failed to set VLAN muticast router timer due to IGMP Snooping message queue being full.
Warning
IGMP snooping massage queue being full.
<SetValue> Set Value
<VlanID> VLAN ID
Failed to set igmp snooping mode <State> for vlan <VlanID>. Failed to set VLAN IGMP Snooping mode due to message queue being full.
December/2018 931
Message Collection
Warning
IGMP snooping massage queue being full.
<State> State
<VlanID> VLAN ID
FUJITSU PSWITCH
Failed to set igmp snooping mode <State> for interface
<InterfaceNumber>. Failed to set interface IGMP Snooping mode due to message queue being full
Warning
IGMP snooping massage queue being full.
<State> State
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to Set Report Suppression Mode for VLAN:<VlanID> family:<FamilyType>.
Warning
Fail to Set Snooping Report Suppression operational mode for specified vlan.
<VlanID> VLAN ID
<FamilyType> type indicate ipv4 or ipv6(ex. L7_AF_INET, L7_AF_INET6,...) or generic family type
Failed to start mrtr timer.
Warning
Can't found the multicast router port timer node.
Failed to start timer.
Warning
The snooping member ship timer start fail.
Failed to stop Max Response Expiry Timer for vlan <VlanID> family
<FamilyType>
932 December/2018
FUJITSU PSWITCH
Warning
Message Collection
Fail to stop the max response expiry timer on the qsnooping control block.
<VlanID> VLAN ID
<FamilyType> type indicate ipv4 or ipv6(ex. L7_AF_INET, L7_AF_INET6,...) or generic family type
Failed to stop Querier Expiry timer for vlan <VlanID> family
<FamilyType>.
Warning
Fail to stop the querier expiry timer on the qsnooping control block.
<VlanID> VLAN ID
<FamilyType> type indicate ipv4 or ipv6(ex. L7_AF_INET, L7_AF_INET6,...) or generic family type
Failed to stop Query interval timer for vlan <VlanID> family
<FamilyType>
Warning
Fail to stop the querier interval timer on the qsnooping control block.
<VlanID> VLAN ID
<FamilyType> type indicate ipv4 or ipv6(ex. L7_AF_INET, L7_AF_INET6,...) or generic family type
Failed to update group membership timer.
Warning
Fail to update the member ship timer.
Failed to update Max Response Expiry Timer for vlan <VlanID> family
<FamilyType>
Warning
Fail to update the max response expiry timer on the qsnooping control block.
<VlanID> VLAN ID
<FamilyType> type indicate ipv4 or ipv6(ex. L7_AF_INET, L7_AF_INET6,...) or generic family type
Failed to update mrtr timer.
December/2018 933
Message Collection
Warning
Fail to update the multicast router port timer.
FUJITSU PSWITCH
Failed to update Querier Expiry timer for vlan <VlanID> family
<FamilyType>
Warning
Fial to update the querier expiry timer on the qsnooping control block.
<VlanID> VLAN ID
<FamilyType> type indicate ipv4 or ipv6(ex. L7_AF_INET, L7_AF_INET6,...) or generic family type
Failed to update Query interval for vlan <VlanID> family
<FamilyType>.
Warning
Fial to update the querier interval timer on the qsnooping control block.
<VlanID> VLAN ID
<FamilyType> type indicate ipv4 or ipv6(ex. L7_AF_INET, L7_AF_INET6,...) or generic family type
Free Timer CB could not be found
Warning
The Timer control block is not exist.
Free Timer CB Index out of bounds <Index>
Warning
Free the timer but this timer index is high the bounds.
<Index> Index
Group membership timer not found.
Warning
The membership is not exist.
Group membership timer not running.
934 December/2018
FUJITSU PSWITCH
Warning
The membership timer is not exist.
Invalid address change event received.
Warning
Received the bad change address event.
Invalid Control Block.
Warning
The group member ship is not exist in snooping control block.
Message Collection
Invalid Data.
Warning
The input snoopung entry is null.
Invalid interface type.
Warning
Add the interface to snooping entry but the interface type unknown.
Max Response Expiry Timer already running.
Warning
To create the max response expiry timer but it is exist now.
Max Response Expiry Timer not running.
Warning
Not found the max response expiry timer on snooping querier timer.
Mismatch in snoopEntryCount for CB Index <Index>. Expecting a nonzero value has <CountValue>
December/2018 935
Message Collection
Warning
FUJITSU PSWITCH
The snooping entry time control block list is not exist any node.
<Index> Index
<CountValue> Count Value
Mrtr Timer node already present.
Warning
Fail to add the new node because the multicast router port timer is exist.
Mrtr Timer node not found after inserting.
Warning
Not found the multicast router port timer node.
msgQueue creation error.
Warning
Create the message queue has error.
Querier Expiry Timer not running
Warning
To create the querier expiry timer but it is exist now.
Query Interval Timer not running.
Warning
To create the querier interval timer but it is exist now.
Queues out of sync.
Warning
The snooping queue has memory post error.
Received an interface change callback while not ready to receive it
936 December/2018
FUJITSU PSWITCH
Warning
Received the process event but Snooping is not ready.
Message Collection
snoopCnfgrConfigFileReadApply: Error applying config snoopApplyConfigData().
Warning
Apply the snooping configuration file has error occur.
Failed to tell the driver to set the snooping mode.
Warning
Applies the IGMP/MLD Snooping Admin mode to Enable/Disable has error occur.
Snooping timer tick send failed.
Warning
Snooping massage queue being full.
Failed to set igmp mrouter mode <State> for interface
<InterfaceNumber> on Vlan <VlanID>. Failed to set VLAN multicast router mode due to IGMP Snooping message queue being full.
Warning
IGMP snooping massage queue being full.
<State> State
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<VlanID>
0/1, 0/0/1
VLAN ID
Failed for interface <InterfaceNumber> vlan <VlanID>
Warning
Can't apply Snooping operational mode for the specified interface and VLAN of a snoop instance
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<VlanID> VLAN ID
Failed for interface <InterfaceNumber> vlan <VlanID> family
<FamilyType>
December/2018 937
Message Collection
Warning
FUJITSU PSWITCH
Can't applies Snooping operational mode for the specified interface and VLAN of a snoop instance
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<VlanID>
<FamilyType>
0/1, 0/0/1
VLAN ID type indicate ipv4 or ipv6(ex. L7_AF_INET, L7_AF_INET6,...) or generic family type
Failed for interface <InterfaceNumber>.
Warning
The interface is invalid for Snooping.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
snoopPacketHandle: Failed to give msgQueue semaphore.
Warning
Give the message queue semaphore has error.
System out of netbuffs.
Warning
System network buffer full.
Timer already running.
Warning
To create the timer but the timer is exist in current app timer.
Timer CB could not be initialized for the snoopEntry
Warning
The snoop control block can't be initialize.
Unable to register with sim for address change events.
938 December/2018
FUJITSU PSWITCH
Warning
Message Collection
Register a routine to be called when a system address changes has error.
Error applying config snoopApplyConfigData.
Warning
Failed to apply Configuration Data for a specified snoop instance.
Invalid message type
Warning
Received the task message, but the type is unvalid.
2.1.67.
SNTP
Failed to Resolve DNS address for Server <IPAddress>
Debug
Failed to resolve DNS address.
<IPAddress> ip_address, or, ipv6_address, or hostname
Invalid Family
Debug
Invalid SNTP protocol type.
osapiSetsockopt to join ff02::101 address on network port failed
Debug
Join IPv6 local address on network port failed.
osapiSetsockopt to join ff02::101 address on service port failed
Debug
Join IPv6 local address on service port failed.
SNTP Server config was changed during Resolve DNS address for
Server <IPAddress>
December/2018 939
Message Collection
Debug
FUJITSU PSWITCH
SNTP server config was changed during resolve DNS address.
<IPAddress> ip_address, or, ipv6_address, or hostname
SNTP: authentication failed for packet from <IPAddress>, keyid =
<ID>
Debug
Authentication failed for SNTP packet.
<IPAddress> ip_address, or, ipv6_address, or hostname
<ID> ID
SNTP: discarding unauthenticated packet from <IPAddress>
Debug
Discarding SNTP unauthenticated packet.
<IPAddress> ip_address, or, ipv6_address, or hostname
SNTP: system clock synchronized on <TimeValue> UTC. Indicates that
SNTP has successfully synchronized the time of the box with the server (<IPAddress>).
Debug
system clock synchronized. Indicates that SNTP has successfully synchronized the time of the box with the SNTP server.
<TimeValue> Time Value
<IPAddress> ip_address, or, ipv6_address, or hostname
sntpFlushReceiveBuffer: flushed <CountValue> messages. Possible attack in progress!
Debug
Process the receive socket as efficiently as possible.
<CountValue> Count Value
sntpLocalSocketOpen: osapiSetsockopt SO_BROADCAST off failed
Debug
Close a broadcast socket failed.
sntpPollSend: send failed - errno <ErrorCode>
940 December/2018
FUJITSU PSWITCH
Debug
Send SNTP packet failed.
<ErrorCode> Error code
Message Collection
Error registering with IPv6 for routing events.
Error
Error registering with IPv6 for routing events.
SNTP failed to register for creation of the routing interface for
Management VLAN.
Error
SNTP failed to register for creation of the routing interface for Management VLAN.
SNTP: Unable to carve out memory for Status information
Error
Initialize SNTP memory failed.
SNTP: Unable to create the task semaphore
Error
Initialize SNTP task semaphore failed.
SNTP: Unable to initialize sntp task
Error
Initialize SNTP function failed.
SNTP: Unable to obtain configuration data
Error
Initialize SNTP configuration data failed.
<FileName>: <FileLineNumber>: sntpCfgTaskCreate: Error allocating CFG data
December/2018 941
Message Collection
Informational
Allocating config data failed.
<FileName> Log is created by this file.
<FileLineNumber> Log is created by this line.
FUJITSU PSWITCH
<FileName>: <FileLineNumber>: sntpCnfgrInitPhase3Process: SNTP
Cfg unable to read config file
Informational
Read SNTP config file failed.
<FileName> Log is created by this file.
<FileLineNumber> Log is created by this line.
<FileName>: <FileLineNumber>: timeRangeCnfgrInitPhase3Process:
Timerange Cfg unable to read config file
Informational
Timerange config unable to read config file.
<FileName> Log is created by this file.
<FileLineNumber> Log is created by this line.
Error on call to sysapiCfgFileWrite routine on config file
<FileName>
Informational
Write SNTP config file failed.
<FileName> Log is created by this file.
sntpApiInit: cannot initialize API with cfg data
Informational
Cannot initialize API with config data.
sntpApiInit: cannot initialize API with server stats data
Informational
Cannot initialize API with server stats data.
sntpCfgTask: Bad status on receive message from cfg queue
<ErrorCode>
942 December/2018
FUJITSU PSWITCH
Informational
Bad status on receive message from config queue.
<ErrorCode> Error code
Message Collection
sntpCfgTaskCreate: Error starting SNTP Client
Informational
Starting SNTP client failed.
sntpCfgTaskCreate: SNTP unable to create message queue
Informational
Create SNTP message queue failed.
sntpCfgTaskCreate: Unable to create SNTP processing task
Informational
Create SNTP processing task failed.
sntpCfgTaskCreate: Unable to syncronize with SNTP Cfg processing task
Informational
Initialize SNTP failed.
sntpCnfgrInitPhase2Process: Could not register with nvStore
Informational
Could not register SNTP config.
SNTP: Received KoD packet from <IPAddress> - Kiss Code = <KissCode>
Notice
Received SNTP packet from interface.
<IPAddress> ip_address, or, ipv6_address, or hostname
<KissCode> Kiss code in SNTP KoD packet
osapiSetsockopt with SO_REUSEADDR failed errorno <ErrorCode>
December/2018 943
Message Collection
Warning
Set socket option to unicast failed.
<ErrorCode> Error code
FUJITSU PSWITCH
sntpLocalBcastSocketOpen: osapiSetsockopt SO_BROADCAST on failed
Warning
Open a broadcast socket failed.
Socket open failed for poll - errno <ErrorCode> last attempt status: <State> (<Index>) - retry count <CountValue>
Informational
Socket open failed.
<ErrorCode>
<State>
<Index>
<CountValue>
Error code
State
Index
Count Value
SNTP failed for poll - errno <ErrorCode> last attempt status:
<State> (<Index>) - retry count <CountValue>
Informational
SNTP select failed.
<ErrorCode>
<State>
<Index>
<CountValue>
Error code
State
Index
Count Value
SNTP time out - errno <ErrorCode> last attempt status: <State>
(<Index>) - retry count <CountValue>
Informational
SNTP time out.
<ErrorCode>
<State>
<Index>
<CountValue>
Error code
State
Index
Count Value
recv6 failed - errno <ErrorCode> last attempt status: <State>
(<Index>) - retry count <CountValue>
944 December/2018
FUJITSU PSWITCH
Informational
Receive SNTP data failed.
<ErrorCode> Error code
<State>
<Index>
<CountValue>
State
Index
Count Value
Message Collection
osapiRecvFrom returns no data - errno <ErrorCode> last attempt status: <State> (<Index>) - retry count <CountValue>
Informational
No SNTP data returns.
<ErrorCode>
<State>
<Index>
<CountValue>
Error code
State
Index
Count Value
invalid sender - errno <ErrorCode> last attempt status:
<IPAddress> (<Index>) - retry count <CountValue>
Informational
Receive data from unknow SNTP ip address.
<ErrorCode> Error code
<IPAddress>
<Index>
<CountValue> ip_address, or, ipv6_address, or hostname
Index
Count Value
sntpResponseProcess failed with last attempt status as: <State>
(<Index>)
Informational
SNTP response process failed.
<State> State
<Index> Index
packet processed - last attempt status: <IPAddress> (<Index>) - retry count <CountValue>
December/2018 945
Message Collection
Informational
FUJITSU PSWITCH
SNTP packet processed doesn't succeed.
<IPAddress> ip_address, or, ipv6_address, or hostname
<Index>
<CountValue>
Index
Count Value
Select timed out - errno <ErrorCode> last attempt status: <State>
- retry count <CountValue>
Informational
Sockets connect timeout and retry.
<ErrorCode> Error code
<State> State
<CountValue> Count Value
Select fail for poll - errno <ErrorCode> last attempt status:
<State> - retry count <CountValue>
Informational
Sockets select fail.
<ErrorCode>
<State>
<CountValue>
Error code
State
Count Value
2.1.68.
SSHD
Admin mode disable sshdListenTask
Debug
Disabled SSH admin mode.
Admin mode enable sshdListenTask
Debug
Enabled SSH admin mode.
mode <AdminMode> unchanged
946 December/2018
FUJITSU PSWITCH
Debug
SSH admin mode unchanged.
<AdminMode> "enabled", "disabled"
protoLevel <ProtocolLevel> unchanged
Debug
SSH protocol levele unchanged.
<ProtocolLevel> Protocol level
protoLevel changed to <ProtocolLevel>
Debug
Changed SSH protocol levele.
<ProtocolLevel> Protocol level
Message Collection
Failed to find SSHD key files
Error
Getting SSH key files failed.
Failed to set admin mode <AdminMode>
Error
Enabled/Disabled SSH function failed.
<AdminMode> "enabled", "disabled"
SSH daemon is enabled. Key generation procedure can not be started.
Error
SSH daemon is enabled. Key generation procedure can not be started.
sshdEventAdminModeSet failed, event=<SSHDEvent>
Error
Setting the SSH admin mode is failed.
<SSHDEvent> SSHD event
sshdEventAdminModeSet success, event=<SSHDEvent>
December/2018 947
Message Collection
Error
Setting the SSH admin mode is success.
<SSHDEvent> SSHD event
FUJITSU PSWITCH
sshdEventPortNumberSet failed, event=<SSHDEvent>
Error
Setting the SSH port number is failed.
<SSHDEvent> SSHD event
sshdEventPortNumberSet success, event=<SSHDEvent>
Error
Setting the SSH port number is success.
<SSHDEvent> SSHD event
sshdEventProtoLevelSet failed, event=<SSHDEvent>
Error
Setting the SSH protocol levele is failed.
<SSHDEvent> SSHD event
sshdEventProtoLevelSet success, event=<SSHDEvent>
Error
Setting the SSH protocol levele is success.
<SSHDEvent> SSHD event
sshdInit: Failed calling sshdIssueCmd.
Error
Failed calling sshdIssueCmd.
Failed to start the sshd server
Informational
Failed to start the sshd server.
Failed to stop the sshd server
948 December/2018
FUJITSU PSWITCH
Informational
Failed to stop the sshd server.
Failed to write sshd config file <FilePath>
Informational
Write SSH config failed.
<FilePath> File path
Message Collection
SSHD: sshdListenTaskRefresh failed, event=<SSHDEvent>
Informational
Refresh SSH task failed
<SSHDEvent> SSHD event
sshdApplyConfigData: Failed to enable SSH
Informational
Enabled the SSH failed.
Failed to create the sshd task. osapiTaskCreate was unable to create the SSHD task.
Notice
Failed to create the sshd task.
Invalid event received. An event type that is invalid for SSHD was received on the SSHD event queue.
Notice
Invalid event received. An event type that is invalid for SSHD was received on the
SSHD event queue.
Msg Queue is full, event = <SSHDEvent>. Failed to send the message to the SSHD message queue as message queue is full. <SSHDEvent> indicates the event to be sent.
December/2018 949
Message Collection
Notice
FUJITSU PSWITCH
Failed to send the message to the SSHD message queue as message queue is full.
<SSHDEvent> SSHD event
osapiMessageReceive failed, rc = <ErrorCode>. osapiMessageReceive failed while waiting for a message on the sshd control task.
Notice
Failed while waiting for a message on the sshd control task.
<ErrorCode> Error code
sshdApiCnfgrCommand: Failed calling sshdIssueCmd. Failed to send the message to the SSHD message queue.
Notice
Failed to send the message to the SSH message queue.
sshdInit: msgQueue creation error. Could not create the SSHD message (event) queue.
Notice
Init the SSH message queue failed.
sshdSave: Error on call to sysapiCfgFileWrite for config file
<FileName>. Failed to create the SSHD config file <FileName>.
Notice
Setting the SSH config failed.
<FileName> Log is created by this file.
Unable to create the clean exit semaphore. Failed to create semaphore for protection of SSHD clean exit routines.
Notice
Failed to create semaphore for protection of SSHD clean exit routines.
Unable to create the global (data) semaphore. Failed to create semaphore for global data protection.
950 December/2018
FUJITSU PSWITCH
Notice
Failed to create semaphore for global data protection.
Message Collection
Unable to create the startup semaphore. Failed to create semaphore for protection of SSHD listen task startup.
Notice
Failed to create semaphore for protection of SSHD listen task startup.
Unable to create the task semaphore. Failed to create semaphore for synchronization of SSHD startup.
Notice
Failed to create semaphore for synchronization of SSHD startup.
Unable to initialize the sshd task. osapiWaitForTaskInit returned an error while waiting for SSHD task initialization.
Notice
Unable to initialize the sshd task.
Unknown UI event in message, event=<SSHDEvent>. Failed to dispatch the UI event to the appropriate SSHD function as it's an invalid event. <SSHDEvent> indicates the event to be dispatched.
Notice
Unknown UI event in message
<SSHDEvent> SSHD event
2.1.69.
STATS_APP
Email messages missed for Group <GroupID>: <CountValue>
Notice
Failed to send collected statistic from a group to Email module.
<GroupID> Group ID
<CountValue> Count Value
Email messages missed for Rule Id <ID>: <CountValue>
December/2018 951
Message Collection
Notice
FUJITSU PSWITCH
Failed to send collected statistic from a flow-based rule to Email module.
<ID> ID
<CountValue> Count Value
Syslog messages missed for Group <GroupID>: <CountValue>
Notice
Failed to send collected statistic from a group to Syslog.
<GroupID> Group ID
<CountValue> Count Value
Syslog messages missed for Rule Id <ID>: <CountValue>
Notice
Failed to send collected statistic from a flow-based rule to Syslog.
<ID> ID
<CountValue> Count Value
Time range <TimeRangeName> is deleted hence removing the operational entries of the counter <CountValue>
Notice
Time range is deleted. The entries that uses this timerange are removed.
<TimeRangeName> The name of time range
<CountValue> Count Value
Time range <TimeRangeName> is deleted hence removing the operational entries of the flow-based rule <ID>
Notice
Time range is deleted. The entries that uses this timerange are removed.
<TimeRangeName> The name of time range
<ID> ID
Time range <TimeRangeName> is deleted hence removing the operational entries of the group <GroupID>
952 December/2018
FUJITSU PSWITCH
Notice
Message Collection
Time range is deleted. The entries that uses this timerange are removed.
<TimeRangeName> The name of time range
<GroupID> Group ID
2.1.70.
SYSTEM
Application Started (<ProcessName>, ID = <ProcessID>, PID =
<ProcessID>
Informational
Application started.
<ProcessName>
<ProcessID>
Process name
Process id
Watchdog Timeout (PID=<ProcessID>, PGID=<ProcessID>,
Name:<WatchdogName>, Interval:<TimeRange>)
Critical
Watchdog Timeout.
<ProcessID>
<WatchdogName>
<TimeRange>
Process id
Watchdog name
Time range
Administrative Command: <Command>
Notice
Command you typed.
<Command> Command
Detected log size exceed the max log size. Resize by deleting older log. (Max Log Size:1048576, Detected Log Size:1048812,
File:/tmp/logs/openapi.log, Size:1015447) (Max Log Size:
<SizeValue>, Detected Log Size: <SizeValue>, File: <FileName>,
Size: <SizeValue>)
December/2018 953
Message Collection
Warning
FUJITSU PSWITCH
Delete the old and large file for size maintenance
<SizeValue> An integer for a specific range or a limit value.
<FileName> Log is created by this file.
2.1.71.
TACACS
TACACS+: Accounting error, no AAA sessions available
Alert
Create Accounting session state failed, no session buffers available.
osapiSnprintf returns negative value.
Debug
osapiSnprintf returns negative value.
TACACS+ Authorization Request: User:<UserName> Service=shell
Cmd=<Command>
Debug
Show the request's information.
<UserName> User name
<Command> Command
TACACS+ Authorization Response received for session <ID> Status:
<TacacsStatus>
Debug
Authorization Response received for given session with status.
<ID> ID
<TacacsStatus> L7_TACACS_AUTHEN_PASS, L7_TACACS_AUTHEN_FAIL,
L7_TACACS_AUTHEN_GETPASS,
L7_TACACS_AUTHEN_GETUSER, ...
TACACS+: authentication error, no authentication sessions available
954 December/2018
FUJITSU PSWITCH
Debug
No session buffers available
Message Collection
TACACS+: password is too long.
Debug
User password should not be empty or exceed the maximum length.
TACACS+: received request from invalid componentId <ComponentID>.
Debug
Component is out of range. Please check your request's component.
<ComponentID> Component ID
TACACS+: received request from unregistered componentId
<ComponentID>, <ComponentName>.
Debug
The component has not been registered.
<ComponentID> Component ID
<ComponentName> Component name
TACACS+: user name in enable request is missing.
Debug
Check the request mode is enable, and make sure the username and password is correct.
TACACS+: user name is too long.
Debug
User name should not be empty or exceed the maximum length.
Tacacs failed to register for creation of the routing interface for Management VLAN.
December/2018 955
Message Collection
Error
FUJITSU PSWITCH
Failed to register for creation of the routing interface. Maybe no empty slot for creating.
TACACS+: accounting error, failed to send
TACACS_EVENT_ACCT_REQUEST.
Informational
The message can't be queue because the semaphore value is zero.
TACACS+: authentication error, failed to send
TACACS_EVENT_AUTH_REQUEST.
Informational
The message can't be queue because the semaphore value is zero.
TACACS+: authorization error, failed to send
TACACS_EVENT_AUTH_REQUEST.
Informational
The message can't be queue because the semaphore value is zero.
TACACS+: authorization error, no authorization sessions available
Informational
No session buffers available
TACACS+: DNS Resolution error, failed to send
TACACS_EVENT_HOSTNAME_RESOLVE.
Informational
The message can't be queue because the semaphore value is zero.
TACACS+: Error writing to open socket
Informational
Error writing to open socket
TACACS+: Failed Intialization.
956 December/2018
FUJITSU PSWITCH
Informational
Initialize TACAS+ global configuration failed.
Message Collection
TACACS+: failed to read packet from server <IPAddress>
Informational
Can't read packets from server or packets length exceed the buffer size.
<IPAddress> ip_address, or, ipv6_address, or hostname
TACACS+: Failed to save configuration file.
Informational
Failed to save configuration file.
TACACS+: failed to send packet to server <IPAddress>
Informational
Error writing to open socket
<IPAddress> ip_address, or, ipv6_address, or hostname
TACACS+: failed to send response received message.
Informational
The message can't be queue because the semaphore value is zero.
TACACS+: failed to send server remove message
Informational
The message can't be queue because the semaphore value is zero.
TACACS+: failed to send socket error message.
Informational
The message can't be queue because the semaphore value is zero.
TACACS+: Invalid Command Pointer.
December/2018 957
Message Collection
Informational
Invalid Command Pointer.
TACACS+: Invalid Command Type.
Informational
Invalid Command Type.
TACACS+: Invalid Command/Event Pair.
Informational
Invalid command/event pair.
FUJITSU PSWITCH
TACACS+: Invalid Request in Configurator Command Execute.
Informational
Invalid command/request pair.
TACACS+: Invalid Request in Configurator Command Initialize.
Informational
Invalid command/request pair.
TACACS+: Invalid Request in Configurator Command Unconfigure.
Informational
Invalid command/request pair.
TACACS+: Invalid Request.
Informational
The request is out of range.
TACACS+: invalid session id received from server <IPAddress>
958 December/2018
FUJITSU PSWITCH
Informational
Message Collection
Mismatch between packe id and session id.
<IPAddress> ip_address, or, ipv6_address, or hostname
TACACS+: received request from unregistered componentId
<ComponentID>, <ComponentName>.
Informational
The component has not been registered.
<ComponentID> Component ID
<ComponentName> Component name
TACACS+: received request with wrong input parameters.
Informational
There are somethings wrong between the username or component id.
TACACS+: received socket error.
Informational
Some type of error on socket, send error messages for session.
TACACS+: Start Tasks Failed
Informational
Unable to initialize tacacsTask.
TACACS+:fail to authenticate. Username or password is wrong.
Informational
Authenticatation fail because wrong username or password.
TACACS+: invalid major version in received packet. Major version mismatch.
Notice
invalid major version in received packet. Major version mismatch.
TACACS+: invalid minor version in received packet. Minor version mismatch.
December/2018 959
Message Collection
Notice
FUJITSU PSWITCH
invalid minor version in received packet. Minor version mismatch.
Failed to connect to server <IPAddress>.
Warning
Socket is not closed
<IPAddress> ip_address, or, ipv6_address, or hostname
failed to find session for server connection.
Warning
failed to find session for server connection.
Length of packet greater than buffer.
Warning
The packet length exceed TACAS_PKT_BUF_SIZE.
Number of command arguments to authorize is <SetValue> which exceeds max supported of <MaxValue>
Warning
Number of command arguments to authorize exceeds max supported
<SetValue> Set Value
<MaxValue> Maximum value
osapiSnprintf returns negative value.
Warning
osapiSnprintf returns negative value.
TACACS+: authentication error, failed to create connection task.
Warning
fail to create a task
TACACS+: authentication error, no server to contact. TACACS+ request needed but no servers are configured.
960 December/2018
FUJITSU PSWITCH
Warning
Message Collection
authentication error, no server to contact. TACACS+ request needed but no servers are configured.
TACACS+: connection failed to server <IPAddress>. i TACACS+ request sent to server <IPAddress> but no response was received.
Warning
request sent to server but no response was received.
<IPAddress> ip_address, or, ipv6_address, or hostname
TACACS+: failed to create authentication session, no buffers available.
Warning
No session buffers available
TACACS+: failed to create authentication session, no server to contact.
Warning
Can't find the next configured server at same or lower priority.
TACACS+: failed to find server to process response.
Warning
Can't find the server index.
TACACS+: failed to open socket to server <IPAddress>.
Warning
failed to open socket to server, system will try another server.
<IPAddress> ip_address, or, ipv6_address, or hostname
TACACS+: Failed to record accounting message (<Command> accounting msg (<Command><Command>) for user <UserName>) with session ID <ID> at server <IPAddress>
December/2018 961
Message Collection
Warning
FUJITSU PSWITCH
Failed to record accounting message, check the status to find out the reason.
<Command> Command
<UserName>
<ID>
<IPAddress>
User name
ID ip_address, or, ipv6_address, or hostname
TACACS+: Failed to send challenge response to component
<ComponentID>, not registered
Warning
The component has not been registered.
<ComponentID> Component ID
TACACS+: Failed to send failure response to component
<ComponentID>, not registered
Warning
The component has not been registered.
<ComponentID> Component ID
TACACS+: Failed to send server connect message.
Warning
The message can't be queue because the semaphore value is zero.
TACACS+: Failed to send success response to component
<ComponentID>, not registered
Warning
The component has not been registered.
<ComponentID> Component ID
TACACS+: invalid sequece number in received packet.
Warning
invalid sequece number in received packet.
TACACS+: length fields (<PacketLength>) and packet length
(<PacketLength>) do not match.
962 December/2018
FUJITSU PSWITCH
Warning
length fields and packet length do not match.
<PacketLength> Packet length
Message Collection
TACACS+: no key configured to encrypt packet for server
<IPAddress>. No key configured for the specified server.
Warning
no key to use, the system wil ltry another server.
<IPAddress> ip_address, or, ipv6_address, or hostname
TACACS+: no key configured to encrypt CONTINUE packet for server
<IPAddress>.
Warning
no key to use, the system wil ltry another server.
<IPAddress> ip_address, or, ipv6_address, or hostname
TACACS+: no key configured to encrypt packet for server
<IPAddress>.
Warning
no key to use, the system wil ltry another server.
<IPAddress> ip_address, or, ipv6_address, or hostname
TACACS+: no key configured to unencrypt REPLY packet for server
<IPAddress>.
Warning
no key to use, the system wil ltry another server.
<IPAddress> ip_address, or, ipv6_address, or hostname
TACACS+: received invalid unencrypted packet.
Warning
received invalid unencrypted packet.
TACACS+: received response packet for unknown session.
December/2018 963
Message Collection
Warning
Can't find the session for the packet.
FUJITSU PSWITCH
TACACS+: received unsupported authentication reply status
<TacacsStatus>.
Warning
received unsupported authentication reply status, check the status to find out the reason.
<TacacsStatus> L7_TACACS_AUTHEN_PASS, L7_TACACS_AUTHEN_FAIL,
L7_TACACS_AUTHEN_GETPASS,
L7_TACACS_AUTHEN_GETUSER, ...
TACACS+: received unsupported authorization reply status
<TacacsStatus>.
Warning
received unsupported authentication reply status, check the status to find out the reason.
<TacacsStatus> L7_TACACS_AUTHEN_PASS, L7_TACACS_AUTHEN_FAIL,
L7_TACACS_AUTHEN_GETPASS,
L7_TACACS_AUTHEN_GETUSER, ...
TACACS+: timer event send failed.
Warning
The message can't be queue because the semaphore value is zero.
tacacsTimerCallback(): tacacsQueue has not been created!
Warning
tacacsQueue has not been created!
Wrong packet size.
964 December/2018
FUJITSU PSWITCH
Warning
Message Collection
Maybe set the wrong service type, so the system get the packet length.
2.1.72.
TIMERANGES
Failed to create Time Range Processing Message Queue
Alert
Create the timezone processing message queue failed.
Failed to send message to Time Range Processing Message Queue
Alert
Send message to timezone processing message queue failed.
Failed to send message to timeRanges thread message type :
<TypeValue>
Alert
Send message queue for timezone initialized failed.
<TypeValue> Type Value
Sending <TimeRangeEventName> notification for time-range
<TimeRangeName> failed: component <ComponentName> not found
Alert
Timezone message ID is not found.
<TimeRangeEventName> The name of time range event
<TimeRangeName> The name of time range
<ComponentName> Component name
Failed to allocate memory for time range tree
Emergency
Allocate memory for timezone failed.
Failed to create buffer pool for time entries in time ranges
December/2018 965
Message Collection
Emergency
Create data buffer for timezone failed.
FUJITSU PSWITCH
Component with ID <ComponentID>, <ComponentName> is already registered
Error
Timezone function is already registered.
<ComponentID> Component ID
<ComponentName> Component name
Error on call to sysapiCfgFileWrite file <FileName>
Error
Write timezone config file failed.
<FileName> Log is created by this file.
Failed to create Time Range Processing Task
Error
Create timezone processing task failed.
Failed to initialize Time Range Processing Task
Error
Initialize timezone processing task failed.
Failed to send message to Time Range Processing Message Queue
Error
Send message to timezone processing message queue failed.
Read lock give failure for file <FileName>:<FileLineNumber>, rc=<ErrorCode>, id=<HandlerID>
966 December/2018
FUJITSU PSWITCH
Error
Read release take failed.
<FileName> Log is created by this file.
<FileLineNumber>
<ErrorCode>
<HandlerID>
Log is created by this line.
Error code
Handler ID
Message Collection
Read lock take failure for file <FileName>:<FileLineNumber>, rc=<ErrorCode>, id=<HandlerID>
Error
Read lock take failed.
<FileName>
<FileLineNumber>
<ErrorCode>
<HandlerID>
Log is created by this file.
Log is created by this line.
Error code
Handler ID
Specified component ID (<ComponentID>) is greater than
L7_LAST_COMPONENT_ID
Error
System log component ID is over range.
<ComponentID> Component ID
TimeRange table is full. Cannot pre-allocate time range
<AllocateTime> of <TimeRange>.
Error
Pre-allocate timezone data failed.
<AllocateTime> Allocation time
<TimeRange> Time range
timeRangeProcessQueue is not initialized
Error
Initialized the timezone process queue failed.
Unable to pre-allocate time ranges. Failed on entry <AllocateTime> of <TimeRange>.
December/2018 967
Message Collection
Error
Pre-allocate timezone entry failed.
<AllocateTime> Allocation time
<TimeRange> Time range
FUJITSU PSWITCH
Write lock give failure for file <FileName>:<FileLineNumber>, rc=<ErrorCode>, id=<HandlerID>
Error
Write release take failed.
<FileName> Log is created by this file.
<FileLineNumber>
<ErrorCode>
<HandlerID>
Log is created by this line.
Error code
Handler ID
Write lock take failure for file <FileName>:<FileLineNumber>, rc=<ErrorCode>, id=<HandlerID>
Error
Write lock take failed.
<FileName>
<FileLineNumber>
<ErrorCode>
<HandlerID>
Log is created by this file.
Log is created by this line.
Error code
Handler ID
Periodic entry falls within the range of already existing periodic time entry
Notice
Periodic entry falls within the range of already existing periodic time entry.
Periodic entry's end time is less than or equal to the start time for same start and end day(s)
Notice
Periodic entry's end time is less than or equal to the start time for same start and end day(s).
Periodic entry's start days is not equal to end days
968 December/2018
FUJITSU PSWITCH
Notice
Periodic entry's start days is not equal to end days.
Message Collection
Periodic entry's start days of the week paramater contains multiple days and start days is not equal to end days
Notice
Periodic entry's start days of the week paramater contains multiple days and start days is not equal to end days.
Sending <TimeRangeEventName> notification for time-range
"<TimeRangeName>" for <ComponentName> component
Notice
Send message queue for timezone is success.
<TimeRangeEventName> The name of time range event
<TimeRangeName> The name of time range
<ComponentName> Component name
timeRangeProcTask(): invalid message received on time range processing queue: MsgType: <TypeValue>
Notice
Received message ID invalid on timezone processing queue.
<TypeValue> Type Value
Sending <TimeRangeEventName> notification for Time Range
"<TimeRangeName>" failed: Time Range Id is UNDEFINED
Warning
Timezone message ID is over range.
<TimeRangeEventName> The name of time range event
<TimeRangeName> The name of time range
2.1.73.
TRAP_MANAGER
Error allocating trapMgrSemId
December/2018 969
Message Collection
Alert
Unable to allocate semaphore ID.
FUJITSU PSWITCH
trapMgr registrar_ID <TrapID> already registered. Re-registering
Debug
In trap manager register function, this register ID has existed.
<TrapID> Trap ID
bad rc on Send Trap call to registrar_ID <TrapID>
Informational
Failed to send SNMP trap. The callback function return something error.
<TrapID> Trap ID
Error on call to osapiFsWrite routine on config file <FileName>
Informational
Unable to save configuration to NVRAM.
<FileName> Log is created by this file.
Failed to get NIM interface index for interface <InterfaceNumber>
Informational
Invalid IF number for getting IF index.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to get NIM System name for interface <InterfaceNumber>
Informational
Invalid IF number for getting IF name.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
trapMgr registrar_ID <TrapID> greater then L7_LAST_TRAP_ID
970 December/2018
FUJITSU PSWITCH
Informational
Invalid register ID for trap manager register function.
<TrapID> Trap ID
trapMgr registrar_ID <TrapID> not registered
Informational
In trap manager register function, this register ID doesn't exist.
<TrapID> Trap ID
Message Collection
TRAPMGR: component ID <ComponentID> greater than or equal to
L7_LAST_COMPONENT_ID
Informational
Invalid component ID for card event register function.
<ComponentID> Component ID
TRAPMGR: Failed to register with CARDMGR
Informational
Could not register callback function with card manager.
trapMgrPhaseTwoInit(): Could not register with nvStore
Informational
Could not register with nvStore.
[VRF "<VrfName>"]: Interface Authentication Failure: interface:
<InterfaceNumber> Router Id: <IPAddress> IP Address: <IPAddress>
Packet Src: <IPAddress> Error Type: <ConfigErrorType> Packet Type:
<PacketType>
December/2018 971
Message Collection
Notice
FUJITSU PSWITCH
Sending "ospfIfAuthFailure" Trap.
<VrfName> Name of Virtual Routing and Forwarding Instance
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<IPAddress>
<ConfigErrorType>
<PacketType> ip_address, or, ipv6_address, or hostname
The type for configuration error
Packet type
[VRF "<VrfName>"]: Interface Configuration Error: interface:
<InterfaceNumber> Router Id: <IPAddress> IP Address: <IPAddress>
Packet Src: <IPAddress> Error Type: <ConfigErrorType> Packet Type:
<PacketType>
Notice
Sending "ospfIfConfigError" Trap.
<VrfName> Name of Virtual Routing and Forwarding Instance
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<IPAddress>
<ConfigErrorType>
<PacketType> ip_address, or, ipv6_address, or hostname
The type for configuration error
Packet type
[VRF "<VrfName>"]: Interface Packet Retransmitted: interface:
<InterfaceNumber> Router Id: <IPAddress> IP Address: <IPAddress>
Neighbor Rtr: <IPAddress> Packet Type: <PacketType> Lsdb Type:
<TypeValue> Lsdb Id: <IPAddress> Lsdb Rtr Id: <IPAddress>
Notice
Sending "ospfTxRetransmit" Trap.
<VrfName> Name of Virtual Routing and Forwarding Instance
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<IPAddress>
<PacketType>
<TypeValue> ip_address, or, ipv6_address, or hostname
Packet type
Type Value
[VRF "<VrfName>"]: Interface Received Bad Packet: interface:
<InterfaceNumber> Router Id: <IPAddress> IP Address: <IPAddress>
Packet Src: <IPAddress> Packet Type: <PacketType>
972 December/2018
FUJITSU PSWITCH
Notice
Message Collection
Sending "ospfIfRxBadPacket" Trap.
<VrfName> Name of Virtual Routing and Forwarding Instance
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<IPAddress>
<PacketType> ip_address, or, ipv6_address, or hostname
Packet type
[VRF "<VrfName>"]: Interface State Change: interface:
<InterfaceNumber> Router Id: <IPAddress> IP Address: <IPAddress>
State: <State>
Notice
Sending "ospfIfStateChange" Trap.
<VrfName> Name of Virtual Routing and Forwarding Instance
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<IPAddress>
<State> ip_address, or, ipv6_address, or hostname
State
[VRF "<VrfName>"]: LSA has aged to max age: Router Id: <IPAddress>
Lsdb Area Id: <IPAddress> Lsdb Type: <TypeValue> Lsdb Id:
<IPAddress> Lsdb Router Id: <IPAddress>
Notice
Sending "ospfMaxAgeLsa" Trap.
<VrfName> Name of Virtual Routing and Forwarding Instance
<IPAddress>
<TypeValue> ip_address, or, ipv6_address, or hostname
Type Value
[VRF "<VrfName>"]: Lsdb Approaching Overflow: Router Id:
<IPAddress> extLsdbLimit: <LsdbLimit>
Notice
Sending "ospfLsdbApproachingOverflow" Trap.
<VrfName> Name of Virtual Routing and Forwarding Instance
<IPAddress> ip_address, or, ipv6_address, or hostname
<LsdbLimit> The limit number of LSAs in the router's link-state database(Lsdb).
[VRF "<VrfName>"]: Lsdb Overflow: Router Id: <IPAddress> extLsdbLimit: <LsdbLimit>
December/2018 973
Message Collection
Notice
FUJITSU PSWITCH
Sending "ospfLsdbOverflow" Trap.
<VrfName> Name of Virtual Routing and Forwarding Instance
<IPAddress>
<LsdbLimit> ip_address, or, ipv6_address, or hostname
The limit number of LSAs in the router's link-state database(Lsdb).
[VRF "<VrfName>"]: Neighbor State Change: interface:
<InterfaceNumber> Router Id: <IPAddress> Neighbor: <IPAddress>
Neighbor Router: <IPAddress> Neighbor State: <State>
Notice
Sending "ospfNbrStateChange" Trap.
<VrfName> Name of Virtual Routing and Forwarding Instance
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<IPAddress>
<State>
0/1, 0/0/1 ip_address, or, ipv6_address, or hostname
State
[VRF "<VrfName>"]: New LSA originated: Router Id: <IPAddress> Lsdb
Area Id: <IPAddress> Lsdb Type: <TypeValue> Lsdb Id: <IPAddress>
Lsdb Router Id: <IPAddress>
Notice
Sending "ospfOriginateLsa" Trap.
<VrfName> Name of Virtual Routing and Forwarding Instance
<IPAddress> ip_address, or, ipv6_address, or hostname
<TypeValue> Type Value
[VRF "<VrfName>"]: Virtual Interface Authentication Failure:
Router Id: <IPAddress> Area Id: <IPAddress> Neighbor: <IPAddress>
Error Type: <ConfigErrorType> Packet Type: <PacketType>
974 December/2018
FUJITSU PSWITCH
Notice
Message Collection
Sending "ospfVirtIfAuthFailure" Trap.
<VrfName> Name of Virtual Routing and Forwarding Instance
<IPAddress>
<ConfigErrorType>
<PacketType> ip_address, or, ipv6_address, or hostname
The type for configuration error
Packet type
[VRF "<VrfName>"]: Virtual Interface Configuration Error: Router
Id: <IPAddress> Area Id: <IPAddress> Neighbor: <IPAddress> Error
Type: <ConfigErrorType> Packet Type: <PacketType>
Notice
Sending "ospfVirtIfConfigError" Trap.
<VrfName> Name of Virtual Routing and Forwarding Instance
<IPAddress> ip_address, or, ipv6_address, or hostname
<ConfigErrorType>
<PacketType>
The type for configuration error
Packet type
[VRF "<VrfName>"]: Virtual Interface Packet Retransmitted: Router
Id: <IPAddress> Area Id: <IPAddress> Neighbor: <IPAddress> Packet
Type: <PacketType> Lsdb Type: <TypeValue> Lsdb Id: <IPAddress>
Lsdb Router Id: <IPAddress>
Notice
Sending "ospfVirtIfTxRetransmit" Trap.
<VrfName> Name of Virtual Routing and Forwarding Instance
<IPAddress> ip_address, or, ipv6_address, or hostname
<PacketType>
<TypeValue>
Packet type
Type Value
[VRF "<VrfName>"]: Virtual Interface Received Bad Packet: Router
Id: <IPAddress> Area Id: <IPAddress> Neighbor: <IPAddress> Packet
Type: <PacketType>
December/2018 975
Message Collection
Notice
FUJITSU PSWITCH
Sending "ospfVirtIfRxBadPacket" Trap.
<VrfName> Name of Virtual Routing and Forwarding Instance
<IPAddress>
<PacketType> ip_address, or, ipv6_address, or hostname
Packet type
[VRF "<VrfName>"]: Virtual Interface State Change: Router Id:
<IPAddress> Area Id: <IPAddress> Neighbor: <IPAddress> State:
<State>
Notice
Sending "ospfVirtIfStateChange" Trap.
<VrfName> Name of Virtual Routing and Forwarding Instance
<IPAddress>
<State> ip_address, or, ipv6_address, or hostname
State
[VRF "<VrfName>"]: Virtual Neighbor State Change: Router Id:
<IPAddress> Virtual Nbr Area: <IPAddress> Virtual Neighbor State:
<State>
Notice
Sending "ospfVirtNbrStateChange" Trap.
<VrfName> Name of Virtual Routing and Forwarding Instance
<IPAddress>
<State> ip_address, or, ipv6_address, or hostname
State
Authent. Failure for IP Address: <IPAddress>
Notice
Sending "authenticationFailure" Trap.
<IPAddress> ip_address, or, ipv6_address, or hostname
Battery power missing alarm.
Notice
Sending "batteryMissing" Trap.
Bgp backwards transition for peer <IPAddress>. New
State:<BgpState>. Last error:<BgpError>. Last suberror:<BgpError>
976 December/2018
FUJITSU PSWITCH
Notice
Message Collection
Sending "bgpBackwardTransNotification" Trap.
<IPAddress> ip_address, or, ipv6_address, or hostname
<BgpState>
<BgpError>
BGP peer state
Error reports from BGP peer
Bgp Peer established for peer <IPAddress>. Last error:<BgpError>.
Last suberror:<BgpError>
Notice
Sending "bgpEstablishedNotification" Trap.
<IPAddress> ip_address, or, ipv6_address, or hostname
<BgpError> Error reports from BGP peer
Cold Start: Unit: <UnitID>
Notice
Sending "coldStart" Trap.
<UnitID> Unit ID
DVMRP Neighbor Lost: LocalAddr: <IPAddress> NewState: <State>
Notice
Sending "dvmrpNeighborLoss" Trap.
<IPAddress> ip_address, or, ipv6_address, or hostname
<State> State
DVMRP Neighbor Not Pruning: LocalAddr: <IPAddress>
NeighborCapabilities: <Capability>
Notice
Sending "dvmrpNeighborNotPruning" Trap.
<IPAddress> ip_address, or, ipv6_address, or hostname
<Capability> "FPMA", "SPMA" for FIP Snooping / "LEAF", "PRUNE", "GENID",
"MTRACE" for DVMRP
Entity Database: Configuration Changed
December/2018 977
Message Collection
Notice
Sending "entConfigChange" Trap.
FUJITSU PSWITCH
Inserts: <CountValue> Deletes: <Counter> Drops: <Counter>
Ageouts :<Counter>
Notice
Sending "lldpRemTablesChange" Trap.
<CountValue> Count Value
<Counter> Counter
Inserts: <CountValue> Deletes: <CountValue> Drops: <CountValue>
Ageouts :<CountValue>
Notice
Sending "aclTrapRuleTimeRangeEvent" Trap.
<CountValue> Count Value
IP ACL <AclName>, Rule <AclRuleSequenceNumber>, <TypeValue>
Match: <CountValue> hit(s)
Notice
Sending "aclTrapRuleLogEvent" Trap.
<AclName> ACL name
<AclRuleSequenceNumber> rule number
<TypeValue>
<CountValue>
Type Value
Count Value
IPv6 ACL <AclName>, Rule <AclRuleSequenceNumber>, <TypeValue>
Match: <CountValue> hit(s)
Notice
Sending "aclTrapRuleLogEvent" Trap.
<AclName> ACL name
<AclRuleSequenceNumber> rule number
<TypeValue>
<CountValue>
Type Value
Count Value
IPv6 ACL <AclName>, Rule <AclRuleSequenceNumber>, Action
<TypeValue>, Time Range <TimeRangeName>, Time Range Notification
<TimeRangeEventName>, Installation status <State>
978 December/2018
FUJITSU PSWITCH
Notice
Sending "aclTrapRuleTimeRangeEvent" Trap.
<AclName> ACL name
<AclRuleSequenceNumber> rule number
<TypeValue> Type Value
<TimeRangeName> The name of time range
<TimeRangeEventName> The name of time range event
<State> State
Message Collection
Link Down: <InterfaceNumber>
Notice
Sending "linkDown" Trap.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Link Up: <InterfaceNumber>
Notice
Sending "linkUp" Trap.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
MAC ACL <AclName>, Rule <AclRuleSequenceNumber>, <TypeValue>
Match: <CountValue> hit(s)
Notice
Sending "aclTrapRuleLogEvent" Trap.
<AclName> ACL name
<AclRuleSequenceNumber> rule number
<TypeValue> Type Value
<CountValue> Count Value
MAC ACL <AclName>, Rule <AclRuleSequenceNumber>, Action
<TypeValue>, Time Range <TimeRangeName>, Time Range Notification
<TimeRangeEventName>, Installation status <State>
December/2018 979
Message Collection
Notice
Sending "aclTrapRuleTimeRangeEvent" Trap.
<AclName> ACL name
<AclRuleSequenceNumber> rule number
<TypeValue> Type Value
<TimeRangeName> The name of time range
<TimeRangeEventName> The name of time range event
<State> State
FUJITSU PSWITCH
PIM Neighbor Lost: Neighbor UP Time: <TimeValue> seconds
Notice
Sending "pimNeighborLoss" Trap.
<TimeValue> Time Value
RMON Falling Alarm: Index: <Index>
Notice
Sending "fallingAlarm" Trap.
<Index> Index
RMON HC Falling Alarm: Index: <Index>
Notice
Sending "hcFallingAlarm" Trap.
<Index> Index
RMON HC Rising Alarm: Index: <Index>
Notice
Sending "hcRisingAlarm" Trap.
<Index> Index
RMON Rising Alarm: Index: <Index>
Notice
Sending "risingAlarm" Trap.
<Index> Index
Spanning Tree Topology Change Received: MSTID: <InstanceID>
<InterfaceNumber>
980 December/2018
FUJITSU PSWITCH
Notice
Message Collection
Sending "topologyChange" Trap.
<InstanceID> Instance ID
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Unit <UnitID> elected as the new STP root
Notice
Sending "newRoot" Trap.
<UnitID> Unit ID
VRRP Authentication Failure: Unit: <UnitID> IP Address:
<IPAddress> Error Type: <TypeValue>
Notice
Sending "vrrpTrapAuthFailure" Trap.
<UnitID> Unit ID
<IPAddress> ip_address, or, ipv6_address, or hostname
<TypeValue> Type Value
VRRP New Master: Unit: <UnitID> IP Address: <IPAddress>
Notice
Sending "vrrpTrapNewMaster" Trap.
<UnitID> Unit ID
<IPAddress> ip_address, or, ipv6_address, or hostname
Warm Start: Unit: <UnitID>
Notice
Sending "warmStart" Trap.
<UnitID> Unit ID
[VRF ¥<VrfName>¥]: Virtual Interface State Change: Router Id: <ID>
Area Id: <AreaID> Neighbor: <IPAddress> State: <State>
December/2018 981
Message Collection
Notice
FUJITSU PSWITCH
Virtual Interface State Change.
<VrfName> Name of Virtual Routing and Forwarding Instance
<ID>
<AreaID>
<IPAddress>
<State>
ID
Area ID ip_address, or, ipv6_address, or hostname
State
[VRF ¥<VrfName>¥]: Neighbor State Change: interface:
<InterfaceNumber> Router Id: <ID> Neighbor: <IPAddress> Neighbor
Router: <ID> Neighbor State: <State>
Notice
Neighbor State Change.
<VrfName> Name of Virtual Routing and Forwarding Instance
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<ID>
<IPAddress>
<State>
ID ip_address, or, ipv6_address, or hostname
State
[VRF ¥<VrfName>¥]: Virtual Neighbor State Change: Router Id: <ID>
Virtual Nbr Area: <AreaID> Virtual Neighbor State: <State>
Notice
Virtual Neighbor State Change.
<VrfName> Name of Virtual Routing and Forwarding Instance
<ID>
<AreaID>
<State>
ID
Area ID
State
[VRF ¥<VrfName>¥]: Interface Configuration Error: interface:
<InterfaceNumber> Router Id: <ID> IP Address: <IPAddress> Packet
Src: <IPAddress> Error Type: <ErrorMessage> Packet Type:
<PacketType>
982 December/2018
FUJITSU PSWITCH
Notice
Message Collection
Interface Configuration Error.
<VrfName> Name of Virtual Routing and Forwarding Instance
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<ID>
<IPAddress>
ID ip_address, or, ipv6_address, or hostname
<ErrorMessage>
<PacketType>
Error message
Packet type
[VRF ¥<VrfName>¥]: Virtual Interface Configuration Error: Router
Id: <ID> Area Id: <AreaID> Neighbor: <IPAddress> Error Type:
<ErrorMessage> Packet Type: <PacketType>
Notice
Interface Configuration Error
<VrfName> Name of Virtual Routing and Forwarding Instance
<ID>
<AreaID>
<IPAddress>
<ErrorMessage>
<PacketType>
ID
Area ID ip_address, or, ipv6_address, or hostname
Error message
Packet type
[VRF ¥<VrfName>¥]: Interface Authentication Failure: interface:
<InterfaceNumber> Router Id: <ID> IP Address: <IPAddress> Packet
Src: <IPAddress> Error Type: <ErrorMessage> Packet Type: %s"
Notice
Interface Authentication Failure.
<VrfName> Name of Virtual Routing and Forwarding Instance
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<ID>
<IPAddress>
<ErrorMessage>
0/1, 0/0/1
ID ip_address, or, ipv6_address, or hostname
Error message
[VRF ¥<VrfName>¥]: Virtual Interface Authentication Failure:
Router Id: <ID> Area Id: <AreaID> Neighbor: <IPAddress> Error Type:
<ErrorMessage> Packet Type: <PacketType>
December/2018 983
Message Collection
Notice
FUJITSU PSWITCH
Virtual Interface Authentication Failure.
<VrfName> Name of Virtual Routing and Forwarding Instance
<ID>
<AreaID>
<IPAddress>
<ErrorMessage>
<PacketType>
ID
Area ID ip_address, or, ipv6_address, or hostname
Error message
Packet type
[VRF ¥<VrfName>¥]: Interface Received Bad Packet: interface:
<InterfaceNumber> Router Id: <ID> IP Address: <IPAddress> Packet
Src:<IPAddress> Packet Type: <PacketType>
Notice
Interface Received Bad Packet.
<VrfName> Name of Virtual Routing and Forwarding Instance
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<ID>
<IPAddress>
<PacketType>
0/1, 0/0/1
ID ip_address, or, ipv6_address, or hostname
Packet type
[VRF ¥<VrfName>¥]: Virtual Interface Received Bad Packet: Router
Id: <ID> Area Id: <AreaID> Neighbor:<IPAddress> Packet Type:
<PacketType>
Notice
Virtual Interface Received Bad Packet.
<VrfName> Name of Virtual Routing and Forwarding Instance
<ID>
<AreaID>
<IPAddress>
<PacketType>
ID
Area ID ip_address, or, ipv6_address, or hostname
Packet type
[VRF ¥<VrfName>¥]: Interface Packet Retransmitted: interface:
<InterfaceNumber> Router Id: <ID> IP Address: <IPAddress> Neighbor
Rtr: <ID> Packet Type: <PacketType> Lsdb Type: <LsdbType> Lsdb Id:
<ID> Lsdb Rtr Id: <ID>
984 December/2018
FUJITSU PSWITCH
Notice
Message Collection
Signifies than an OSPF packet has been retransmitted on a non-virtual interface
<VrfName> Name of Virtual Routing and Forwarding Instance
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<ID>
<IPAddress>
ID ip_address, or, ipv6_address, or hostname
<PacketType>
<LsdbType>
Packet type
LSDB type
[VRF ¥<VrfName>¥]: Virtual Interface Packet Retransmitted: Router
Id: <ID> Area Id: <IDNeighbor>:<InterfaceNumber> Packet Type:
<PacketType> Lsdb Type: <LsdbType> Lsdb Id: <ID> Lsdb Router Id:
<ID>
Notice
Signifies than an OSPF packet has been retransmitted on a virtual interface
<VrfName> Name of Virtual Routing and Forwarding Instance
<ID> ID
<IDNeighbor>
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<PacketType>
<LsdbType>
0/1, 0/0/1
Packet type
LSDB type
[VRF ¥<VrfName>¥]: New LSA originated: Router Id: <ID> Lsdb Area
Id: <ID> Lsdb Type: <LsdbType> Lsdb Id: <ID> Lsdb Router Id: <ID>
Notice
Signifies that a new LSA has been originated by this router.
<VrfName> Name of Virtual Routing and Forwarding Instance
<ID>
<LsdbType>
ID
LSDB type
[VRF ¥<VrfName>¥]: LSA has aged to max age: Router Id: <ID> Lsdb
Area Id: <ID> Lsdb Type: <LsdbType> Lsdb Id: <ID> Lsdb Router Id:
<ID>
December/2018 985
Message Collection
Notice
FUJITSU PSWITCH
Signifies that one of the LSA in the router's link-state database has aged to
MaxAge.
<VrfName> Name of Virtual Routing and Forwarding Instance
<ID>
<LsdbType>
ID
LSDB type
[VRF ¥<VrfName>¥]: Lsdb Overflow: Router Id: <ID> extLsdbLimit:
<LsdbLimit>
Notice
Signifies that the number of LSAs in the router's link-state data-base has exceeded ospfExtLsdbLimit.
<VrfName> Name of Virtual Routing and Forwarding Instance
<ID>
<LsdbLimit>
ID
The limit number of LSAs in the router's link-state database(Lsdb).
[VRF ¥<VrfName>¥]: Lsdb Approaching Overflow: Router Id: <ID> extLsdbLimit: <LsdbLimit>
Notice
Signifies that the number of LSAs in the router's link-state database has exceeded ninety percent of ospfExtLsdbLimit.
<VrfName> Name of Virtual Routing and Forwarding Instance
<ID> ID
<LsdbLimit> The limit number of LSAs in the router's link-state database(Lsdb).
[VRF ¥<VrfName>¥]: Interface State Change: interface:
<InterfaceNumber> Router Id: <ID> IP Address: <IPAddress> State:
<State>
986 December/2018
FUJITSU PSWITCH
Notice
Message Collection
Signifies that there has been a change in the state of a non-virtual OSPF interface
<VrfName> Name of Virtual Routing and Forwarding Instance
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<ID>
<IPAddress>
<State>
ID ip_address, or, ipv6_address, or hostname
State
2.1.74.
UDLD
<FunctionName>: Unknown NIM startup event <ID>.
Error
Unknown NIM startup event.
<FunctionName> Log is created by this function.
<ID> ID
Error accessing udld config data for interface <InterfaceNumber>.
Error
Access the UDLD configure data failed on the specific interface.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failure to take udld message queue semaphore.
Error
Failure to take udld message queue semaphore.
Unrecognized event <ID>.
Error
Unrecognized UDLD event.
<ID> ID
<FunctionName>: Rcvd unknown NIM intf state <State> for intf
<InterfaceNumber>.
December/2018 987
Message Collection
Informational
FUJITSU PSWITCH
Received unknown NIM interface state on the specific interface.
<FunctionName> Log is created by this function.
<State> State
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Can't get config id for interface <InterfaceNumber>.
Informational
Get the config ID for the interface failed.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Can't map interface <InterfaceNumber>.
Informational
This message occurrs if the interface is not configurable.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Coudn't delete all entries discovered on the specified interfaces.
Informational
Delete all entries discovered on the specified interface failed when the UDLD mode is disabled.
Couldn't clean neighbors table.
Informational
Delete all entries from neighbors failed when the UDLD mode is disabled.
Couldn't delete the entry.
Informational
Delete an entry from the specified tree failed.
Entry not found.
988 December/2018
FUJITSU PSWITCH
Informational
Message Collection
Add or delete an entry will check if it is exists. This message occurrs if the entry is not found.
Event out of range.
Informational
The UDLD debug event ID is out of range.
Interface <InterfaceNumber> is invalid.
Informational
Determine the interface is invalid for UDLD.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Received an interface callback while outside the EXECUTE state.
Informational
Received an interface callback while outside the EXECUTE state.
Reseting port <InterfaceNumber>.
Informational
Reset the interface disabled by UDLD.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Udld isn't ready.
Informational
Configuring UDLD, transmitting or receiving UDLD packets will check the UDLD module on the specific interface if it is ready.
udldIntfChangeCallback is not ready.
Informational
Handle UDLD interface Change callback function failed.
udldIntfConfigEntryGet failed for interface <InterfaceNumber>.
December/2018 989
Message Collection
Informational
FUJITSU PSWITCH
Get the UDLD interface config entry data failed on the specific interface.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Wrong event <ID>.
Informational
The UDLD debug event ID is out of range.
<ID> ID
Wrong interface <InterfaceNumber>.
Informational
Check the interface number failed.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<FunctionName>: Failed to create intf <InterfaceNumber>.
Notice
Failed to create UDLD interface.
<FunctionName> Log is created by this function.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<FunctionName>: Failed to send NIM startup <ID> msg to UDLD msg queue.
Notice
Failed to send NIM startup message to UDLD message queue.
<FunctionName> Log is created by this function.
<ID> ID
<FunctionName>: Rcvd NIM startup <ID> callback in UDLD init state
<State>.
990 December/2018
FUJITSU PSWITCH
Notice
Received NIM startup callback in UDLD init state.
<FunctionName> Log is created by this function.
<ID>
<State>
ID
State
Message Collection
<FunctionName>: Rcvd NIM startup <ID> callback when UDLD msg queue not created.
Notice
Received NIM startup callback when UDLD message queue hasn't be created.
<FunctionName> Log is created by this function.
<ID> ID
<FunctionName>: udldIntfAcquire failed for intf
<InterfaceNumber>.
Notice
To process the callback for PROBE_SETUP failed.
<FunctionName> Log is created by this function.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Could not get a buffer for <InterfaceNumber> interface.
Notice
Cannot get a buffer when handling the UDLD packets.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Disabling interface <InterfaceNumber>.
Notice
UDLD shutdown the interface when FLUSH is detected.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Error on call to sysapiCfgFileWrite routine on config file
<FileName>
December/2018 991
Message Collection
Notice
Error on call to sysapiCfgFileWrite routine on config file.
<FileName> Log is created by this file.
FUJITSU PSWITCH
Error transmitting packet on <InterfaceNumber> interface.
Notice
Transmitting UDLD packet on the specific interface failed.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to give msgQueue semaphore on <InterfaceNumber> interface.
Notice
Failure to give UDLD message queue semaphore on the specific interface.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to give msgQueue semaphore.
Notice
Failure to give UDLD message queue semaphore.
Foreign pdu on interface <InterfaceNumber>.
Notice
Receiving UDLD packets will check the MAC address and the ether type. This message occurrs if the censor is failed.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Interface <InterfaceNumber> is D-Disabled due to UDLD.
Notice
Interface is shutdown due to UDLD behavior.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Interface <InterfaceNumber> is restored from D-Disabled State.
992 December/2018
FUJITSU PSWITCH
Notice
Message Collection
Restores specified interface that was disabled by UDLD.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
One of parameters is equal to NULL.
Notice
This message occurrs if the parameter is NULL when calculating the checksum.
osapiMessageSend failed on <InterfaceNumber> interface.
Notice
Send UDLD Queue message failed on the specific interface, ex: UDLD PDU queue.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Send UDLD process queue message failed.
Notice
Send UDLD process queue message failed.
Task creation error.
Notice
Create UDLD Task failed.
UDLD message recv failed: event <ID>, intIfNum <InterfaceNumber>
Notice
Receive UDLD message failed.
<ID> ID
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
udldCtlApplyConfigData failed.
December/2018 993
Message Collection
Notice
Apply UDLD config data failed.
udldPduQueue creation error.
Notice
Create UDLD PDU Queue failed.
udldProcessQueue creation error.
Notice
Create UDLD process Queue failed.
FUJITSU PSWITCH
Unable to create udld task semaphore.
Notice
Unable to create udld task semaphore.
Unable to deregister udld callback with Sysnet!
Notice
Unable to deregister UDLD callback with Sysnet.
Unable to initialize udld task.
Notice
Unable to initialize UDLD task.
Unable to register for NIM Interface change callback!
Notice
Unable to register for NIM Interface change callback.
Data Length(<LengthValue>) greater than UDLD PDU SIZE <MaxValue>.
994 December/2018
FUJITSU PSWITCH
Warning
Message Collection
Removing the UDLD packet header will check the data length of the packet.
<LengthValue> ipv6 prefix length
<MaxValue> Maximum value
2.1.75.
USBFLASHDRIVE
Another Transfer is in Progress.
Debug
Another data transfer is in progress.
Attached USB flash drive with ID <UsbFlashDriveID>!
Debug
USB flash drive is attached.
<UsbFlashDriveID> USB flash drive ID
Detached USB flash drive with ID <UsbFlashDriveID>!
Debug
USB flash drive is detached.
<UsbFlashDriveID> USB flash drive ID
Event is out of range <EventID>
Debug
Invalid event is used.
<EventID> Event ID
Requested file could not be copied!
Debug
Requested file is not found.
State is out of range <EventID>
December/2018 995
Message Collection
Debug
Invalid state is used.
<EventID> Event ID
FUJITSU PSWITCH
USB Auto Configuration saved the configuration.
Debug
USB auto configuration saved the configuration.
<FileName>' contains more than allowed strings(<MaxValue>)!
Error
Exceed maximum available lines.
<FileName> Log is created by this file.
<MaxValue> Maximum value
Backup image could not be activated!
Error
Backup image could not be activated.
Backup image could not be activated! Boot code update required!
Error
Backup image could not be activated. Boot code update required.
Backup image does not exists!
Error
Backup image does not exist.
Cold Start: Unit: <UnitID>
Error
Unexpected registrar id.
<UnitID> Unit ID
Could not get drive class for <UsbFlashDriveID> USB drive!
996 December/2018
FUJITSU PSWITCH
Error
Could not get drive class for USB drive.
<UsbFlashDriveID> USB flash drive ID
Message Collection
Could not get drive subclass for <UsbFlashDriveID> USB drive!
Error
Could not get drive subclass for USB drive.
<UsbFlashDriveID> USB flash drive ID
Could not get Manufacturer's name for <UsbFlashDriveID> USB drive!
Error
Could not get Manufacturer's name for USB drive.
<UsbFlashDriveID> USB flash drive ID
Could not get product name for <UsbFlashDriveID> USB drive!
Error
Could not get product name for USB drive.
<UsbFlashDriveID> USB flash drive ID
Could not get product-specific ID for <UsbFlashDriveID> USB drive!
Error
Could not get product-specific ID for USB drive.
<UsbFlashDriveID> USB flash drive ID
Could not get protocol version for <UsbFlashDriveID> USB drive!
Error
Could not get protocol version for USB drive.
<UsbFlashDriveID> USB flash drive ID
Could not get serial number for <UsbFlashDriveID> USB drive!
December/2018 997
Message Collection
Error
Could not get serial number for USB drive.
<UsbFlashDriveID> USB flash drive ID
FUJITSU PSWITCH
Could not get USB drive(<UsbFlashDriveID>) status!
Error
Could not get USB drive status.
<UsbFlashDriveID> USB flash drive ID
Could not get Vendor ID for <UsbFlashDriveID> USB drive!
Error
Could not get Vendor ID for USB drive.
<UsbFlashDriveID> USB flash drive ID
Could not get version number for <UsbFlashDriveID> USB drive!
Error
Could not get version number for USB drive.
<UsbFlashDriveID> USB flash drive ID
Could not resolve backup image file name.
Error
Could not resolve backup image file name.
Got NULL as parameter!
Error
Parameter is null.
Got wrong USB flash drive ID(<UsbFlashDriveID>)!
Error
Invalid USB flash id.
<UsbFlashDriveID> USB flash drive ID
Image could not be updated.
998 December/2018
FUJITSU PSWITCH
Error
Image could not be updated.
Message Collection
Image name for update could not be resolved!
Error
Invalid image name.
Image update finished. USB Auto Configuration is going to reboot the device.
Error
Image update finished. USB Auto Configuration is going to reboot the device.
Invalid registrat ID <ComponentID>!
Error
Unexpected registrar id.
<ComponentID> Component ID
Not in active state!
Error
USB is not active.
osapiSemaTake failed!
Error
Failed to take semaphore.
Path could not be resolved!
Error
File path could not be resolved.
Received USB device information pointer as NULL parameter!
December/2018 999
Message Collection
Error
USB device information is empty.
FUJITSU PSWITCH
Registering with USB driver failed!
Error
Failed to register USB driver.
Registrar ID <ComponentID> notification failed!
Error
Failed to notify.
<ComponentID> Component ID
Temporary file could not be created!
Error
Temporary file could not be created.
There are several available '*.setup' files. Concrete name could not be resolved!
Error
There are several available '*.setup' files. Concrete name could not be resolved.
There are several available configuration files. Concrete name could not be resolved!
Error
There are several available configuration files. Concrete name could not be resolved.
There is no '*.setup' file available!
Error
There is no '*.setup' file available.
There is no available configuration file on USB stick!
1000 December/2018
FUJITSU PSWITCH
Error
No available configuration file on USB stick.
Message Collection
USB Auto Configuration can not mark line in <FileName> as
'<State>'.
Error
Can not mark line in file.
<FileName> Log is created by this file.
<State> State
USB Auto Configuration got some errors during configuration('<FileName>' from <UsbFlashDriveID> USB Stick) apply. Inconsistent configuration stored to '<FileName>' to provide error localization ability.
Error
USB auto configuration got some errors during configuration.
<FileName> Log is created by this file.
<UsbFlashDriveID> USB flash drive ID
USB Auto Configuration has failed to rename the file.
Error
Failed to rename file.
USB Auto Configuration has terminated due to there being no more lines available for use within the USB file '<FileName>'.
Error
USB auto configuration has terminated.
<FileName> Log is created by this file.
USB Auto Configuration successfully applied selected('<FileName>' from <UsbFlashDriveID> USB Stick) configuration to running-config.
December/2018 1001
Message Collection
Error
USB auto configuration successfully.
<FileName> Log is created by this file.
<UsbFlashDriveID> USB flash drive ID
FUJITSU PSWITCH
USB Auto Configuration was not able to read <FileName> file on
<UsbFlashDriveID> usb device.
Error
Can not read file in USB device.
<FileName> Log is created by this file.
<UsbFlashDriveID> USB flash drive ID
Chose <FileName> file on <UsbFlashDriveID> USB stick.
Informational
Select specific file in USB stick.
<FileName> Log is created by this file.
<UsbFlashDriveID> USB flash drive ID
Configuration file <FileName> was found on <UsbFlashDriveID> USB drive!
Informational
Configuration file was found on USB drive.
<FileName> Log is created by this file.
<UsbFlashDriveID> USB flash drive ID
Image file <FileName> was found on <UsbFlashDriveID> USB drive!
Informational
Image file was found on USB drive.
<FileName> Log is created by this file.
<UsbFlashDriveID> USB flash drive ID
Saving configuration failed.
1002 December/2018
FUJITSU PSWITCH
Informational
Failed to save configuration.
Message Collection
The downloaded image has the same version as the backup image!
Backup image was activated!
Informational
Backup image was activated.
The image found has the same version as the active image! No actions must be performed!
Informational
The image found has the same version as the active image.
USB Auto Configuration process is finished!
Informational
USB auto configuration process is finished.
There is startup-config on flash.
Notice
There is startup-config on flash.
Was not able to update the image!
Notice
Can not update the image.
Duplicate MAC address(<MacAddress>) in line <FileLineNumber>.
Warning
Duplicate MAC address.
<MacAddress>
<FileLineNumber>
MAC address
Log is created by this line.
Failed to register for config apply completion.
December/2018 1003
Message Collection
Warning
FUJITSU PSWITCH
Failed to register callback function for config apply completion.
Message send failed!
Warning
Failed to send message.
No event handler for state (<UsbFlashDriveState>)
Warning
No suitable event handler to operate.
<UsbFlashDriveState> USB flash drive state
No state handler for state (<UsbFlashDriveState>)
Warning
No suitable state handler to operate.
<UsbFlashDriveState> USB flash drive state
osapiMessageReceive failed!
Warning
Failed to receive message.
osapiMessageSend failed!
Warning
Failed to send message.
usbFlashDrive : Unrecognized event <EventID>
Warning
Unrecognized event is used.
<EventID> Event ID
usbFlashDriveApiCnfgrCommand(): message sending failed: event =
<EventID>
1004 December/2018
FUJITSU PSWITCH
Warning
Failed to send message.
<EventID> Event ID
Message Collection
usbFlashDriveInit: message send failed: event = <EventID>
Warning
Failed to send message.
<EventID> Event ID
usbFlashDriveInit: task creation error.
Warning
Failed to create task.
usbFlashDriveInit: Unable to initialize usbFlashDriveTask()
Warning
Failed to initialize task.
usbFlashDriveInit: usbFlashDriveCfgSemaphore creation error.
Warning
Failed to create semaphore.
usbFlashDriveInit: usbFlashDriveMsgQueue creation error.
Warning
Failed to create message queue.
2.1.76.
USER_MGR
User Manager failed to register for apply config completions.
Alert
Failed to register for applying config.
User Manager failed to register for UISM session creation callback.
December/2018 1005
Message Collection
Alert
Failed to register for session creation.
FUJITSU PSWITCH
User Manager failed to register for UISM session removal callback.
Alert
Failed to register for session removal.
Failed to get APL for line <RequestLine>, mode <RequestMode>.
Debug
Failed to get APL for this line.
<RequestLine> Request Line
<RequestMode> Request Mode
Failed to get authentication method <AuthMethod> for line
<RequestLine>, mode <RequestMode>.
Debug
Failed to get authentication method.
<AuthMethod> Authentication method
<RequestLine>
<RequestMode>
Request Line
Request Mode
Password Successfully configured
Debug
Success to configure password.
Received failure msg id <AuthStatus> from TACACS+ component.
Debug
Received failure Authentication Status.
<AuthStatus> Authentication status
Received wrong message from TACACS+ component, event = <EventID>.
1006 December/2018
FUJITSU PSWITCH
Debug
Received wrong message.
<EventID> Event ID
Incorrect access line type
Error
Failed to access line type.
Incorrect Access Line <RequestLine>.
Error
Incorrect Access Line.
<RequestLine> Request Line
Message Collection
Incorrect input parameters.
Error
Incorrect input parameters.
Incorrect order parameter.
Error
Incorrect order parameter.
Password Configuration Error: <ErrorMessage>
Error
Failed to configure password.
<ErrorMessage> Error message
Specified AML <AuthMethodListName> does not exist.
Error
Authorization Method doesn't exist.
<AuthMethodListName> Authentication method List name
User manager received NIM startup callback with invalid phase
<StartupPhase>.
December/2018 1007
Message Collection
Error
Invalid startup phase.
<StartupPhase> Startup Phase
FUJITSU PSWITCH
<AccessLineName> Session <ID> started for user <UserName> connected from <IP6Address>
Informational
Get the text name for the session type.
<AccessLineName> Access line name
<ID> ID
<UserName>
<IP6Address>
User name
IPv6 address
Error in sending Accounting Start to RADIUS for user <UserName> on line <RequestLine>
Informational
Error in sending Accounting Start.
<UserName> User name
<RequestLine> Request Line
Error on call to osapiFsWrite routine on config file <FileName>
Informational
Failed to save user config file.
<FileName> Log is created by this file.
Unable to create User Manager semaphore
Informational
Failed to create User Manager semaphore.
Unable to register User Manager for TACACS response callback
Informational
Failed to register User Manager.
Unable to deregister User Manager for TACACS response callback
1008 December/2018
FUJITSU PSWITCH
Informational
Failed to deregister User Manager.
Message Collection
Unable to register User Manager for RADIUS response callback
Informational
Failed to Unable to register User Manager.
Unsupported vendor Id received <VendorId>
Informational
Unsupported vendor Id received.
<VendorId> Vendor ID
User <UserName> attemping to configure the already existing password
Informational
User is attemping to configure the already existing password.
<UserName> User name
User <UserName> Failed to login because of authentication failures
Informational
Failed to login.
<UserName> User name
User <UserName> attemping to reuse an old password
Informational
User is attemping to reuse an old password.
<UserName> User name
UserMgr: Unable to create msg queue
December/2018 1009
Message Collection
Informational
Failed to create message queue.
FUJITSU PSWITCH
Access level for user <UserName> could not be determined. Setting to READ_ONLY. Invalid access level specified for the user. The access level is set to READ_ONLY. <UserName> indicates the username.
Notice
Failed to login user access level mode.
<UserName> User name
Failed to get administrative profile settings for the user
<UserName>
Notice
Failed to get administrative.
<UserName> User name
User <UserName> is unlocked
Notice
User is logging with correct password.
<UserName> User name
Configuration for user <UserName> has changed, administrative profile <FileName> was removed.
Warning
Removed a profile name configured for a user.
<UserName> User name
<FileName> Log is created by this file.
Command Authorization Method List <AuthMethodListName> is used.
Couldn't be deleted.
Warning
Authorization Method couldn't delete.
<AuthMethodListName> Authentication method List name
Cmd[<Command>] Authorization failed for user <UserName>
1010 December/2018
FUJITSU PSWITCH
Warning
Authorization failed.
<Command>
<UserName>
Command
User name
Message Collection
Error recording Start-Accounting message for Command <Command> for user <UserName> on access line <RequestLine>
Warning
Account user sessions failed.
<Command> Command
<UserName>
<RequestLine>
User name
Request Line
Error recording Start-Accounting message for Exec Session for user
<UserName> on access line <RequestLine>
Warning
Account user sessions failed.
<UserName> User name
<RequestLine> Request Line
Exec Authorization failed for user <UserName>
Warning
Authorization failed.
<UserName> User name
Exec Authorization Method List <AuthMethodListName> is used.
Couldn't be deleted.
Warning
Authorization Method couldn't delete.
<AuthMethodListName> Authentication method List name
User Manager failed sending accounting session stop!
Warning
Failed to send accounting session.
Failed to get Authorization method
December/2018 1011
Message Collection
Warning
Failed to get Authorization method.
Failed to get Exec Authorization method
Warning
Failed to get Authorization method.
Incorrect list name.
Warning
Incorrect list name.
Incorrect input parameter.
Warning
Incorrect input parameter.
Invalid reserved word string
Warning
Input string against a list of reserved words.
FUJITSU PSWITCH
User <UserName> locked out on authentication failure
Warning
Locked out count failure.
<UserName> User name
2.1.77.
USMDB
Failed to send Unnumbered peer info update to IP MAP thread.
Message Queue overflow, try disabling ip routing and enabling it after a while to recover
1012 December/2018
FUJITSU PSWITCH
Error
Message Collection
Message Queue overflow, try disabling ip routing and enabling it after a while to recover.
NIM creation of VLAN routing intf <InterfaceNumber> not completed, timeout
Informational
Failed to create VLAN routing interface.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
2.1.78.
VR_AGENT
Failed adding kernel route ip <IPAddress> mask %Mask viap
<IPAddress> on IntIf <InterfaceNumber>. Error: <ErrorCode>.
Informational
Fail to add the kernel route entry because the table is full.
<IPAddress> ip_address, or, ipv6_address, or hostname
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<ErrorCode>
0/1, 0/0/1
Error code
Failed adding kernel route ip <IPAddress> mask %Mask viap
<IPAddress> on IntIf <InterfaceNumber>. Error: <ErrorCode>.
Error
Fail to add the kernel route entry but the table is not full.
<IPAddress> ip_address, or, ipv6_address, or hostname
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<ErrorCode>
0/1, 0/0/1
Error code
Successfully added kernel route ip <IPAddress> mask %Mask viap
<IPAddress> on IntIf <InterfaceNumber>.
December/2018 1013
Message Collection
Informational
FUJITSU PSWITCH
Success to add the kernel route entry.
<IPAddress> ip_address, or, ipv6_address, or hostname
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed deleting kernel route ip <IPAddress> mask %Mask viap
<IPAddress> on IntIf <InterfaceNumber>. Error: <ErrorCode>.
Error
Fail to delete the kernel route entry.
<IPAddress> ip_address, or, ipv6_address, or hostname
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<ErrorCode>
0/1, 0/0/1
Error code
Successfully deleted kernel route ip <IPAddress> mask %Mask viap
<IPAddress> on IntIf <InterfaceNumber>.
Informational
Success to delete the kernel route entry.
<IPAddress> ip_address, or, ipv6_address, or hostname
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed adding kernel IPv6 route <IP6Address> mask <IP6Prefix> viap
<IP6Address> on IntIf <InterfaceNumber>. Error: <ErrorCode>.
Informational
Fail to add the kernel ipv6 route entry because the table is full.
<IP6Address> IPv6 address
<IP6Prefix> The size in bits of the prefix
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<ErrorCode>
0/1, 0/0/1
Error code
Failed adding kernel IPv6 route <IP6Address> mask <IP6Prefix> viap
<IP6Address> on IntIf <InterfaceNumber>. Error: <ErrorCode>.
1014 December/2018
FUJITSU PSWITCH
Error
Message Collection
Fail to add the kernel ipv6 route entry but the table is not full.
<IP6Address> IPv6 address
<IP6Prefix> The size in bits of the prefix
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<ErrorCode>
0/1, 0/0/1
Error code
Successfully added kernel IPv6 route <IP6Address> mask
<IP6Prefix> viap <IP6Address> on IntIf <InterfaceNumber>. Error:
<ErrorCode>.
Informational
Success to add the kernel ipv6 route entry.
<IP6Address> IPv6 address
<IP6Prefix> The size in bits of the prefix
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<ErrorCode>
0/1, 0/0/1
Error code
Failed deleting kernel IPv6 route <IP6Address> mask <IP6Prefix> viap <IP6Address> on IntIf <InterfaceNumber>. Error: <ErrorCode>.
Error
Fail to delete the kernel ipv6 route entry.
<IP6Address> IPv6 address
<IP6Prefix> The size in bits of the prefix
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<ErrorCode> Error code
Successfully deleted kernel IPv6 route <IP6Address> mask
<IP6Prefix> viap <IP6Address> on IntIf <InterfaceNumber>.
December/2018 1015
Message Collection
Informational
FUJITSU PSWITCH
Success to delete the kernel ipv6 route entry.
<IP6Address> IPv6 address
<IP6Prefix> The size in bits of the prefix
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
[VRF <VrfName>]: ERROR: Failed to create
RtoNetlink-rtoExtRoute_queue.
Error
Fail to alloc the queue.
<VrfName> Name of Virtual Routing and Forwarding Instance
[VRF <VrfName>]:Failed to create RtoNetlink-LinuxUpdatesHandler thread. Error <ErrorCode>.
Error
Fail to create the thread.
<VrfName> Name of Virtual Routing and Forwarding Instance
<ErrorCode> Error code
[VRF <VrfName>]:Failed to create RtoNetlink-ExtRoutesProcess thread. Error <ErrorCode>.
Error
Fail to create the thread.
<VrfName> Name of Virtual Routing and Forwarding Instance
<ErrorCode> Error code
[VRF <VrfName>]:VR_AGENT: Failed to register as best route change client.
Error
Fail to register the best route.
<VrfName> Name of Virtual Routing and Forwarding Instance
Client list already full.
1016 December/2018
FUJITSU PSWITCH
Error
Fail to register the best route. Because client list full.
Message Collection
Client name already registered.
Error
Fail to register the best route. Because client is already registered.
Other failure.
Error
Fail to register the best route. But not client list full or client is already registered .
[VRF <VrfName>]:Failed to create router event client socket.
Error
Socket create fail.
<VrfName> Name of Virtual Routing and Forwarding Instance
[VRF <VrfName>]:Registration failed for RouterEventClient following timeout! mypid = %ProcessID, myName = %ProcessName
Error
Process register to the client is time out.
<VrfName> Name of Virtual Routing and Forwarding Instance
[VRF <VrfName>]:Netlink socket create failed!
Error
Socket create fail.
<VrfName> Name of Virtual Routing and Forwarding Instance
[VRF <VrfName>]:Netlink socket bind failed!
Error
Fail to bind the socket.
<VrfName> Name of Virtual Routing and Forwarding Instance
[VRF <VrfName>]:Netlink message send failure!
December/2018 1017
Message Collection
Error
FUJITSU PSWITCH
Socket send packet fail.
<VrfName> Name of Virtual Routing and Forwarding Instance
[VRF <VrfName>]:Unable to get interface name for interface idx
<InterfaceNumber>
Error
Fail to get the interface name.
<VrfName> Name of Virtual Routing and Forwarding Instance
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
[VRF <VrfName>]:Failed to flap the interface <InterfaceNumber>.
Error
Fail to flap the routing interface to flushe the routes pointing to it
<VrfName> Name of Virtual Routing and Forwarding Instance
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
[VRF <VrfName>]:Some error in retreiving netlink RTM_NEWLINK message type <MessageType>, length %MessageLength
Error
Fail to receive the message.
<VrfName> Name of Virtual Routing and Forwarding Instance
<MessageType> Message type.
VRF-ID <VrfID>: SyncDB Registration failed for VR_Agent.
Error
Fail to client to Sync Database.
<VrfID> ID of Virtual Routing and Forwarding Instance
Error initializing VR-Agent OpenApi semaphore.
1018 December/2018
FUJITSU PSWITCH
Error
Fail to initial the open api semaphore.
Message Collection
Failed to get the ICMP redirects mode of the interface
<InterfaceNumber>
Error
Failed to get the ICMP redirects mode of the interface number.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to set the ICMP redirects mode (<IcmpMode>)on the interface
<InterfaceNumber>. error:<ErrorCode> (<ErrorMessage>)
Error
Failed to set the ICMP redirects mode on the interface number.
<IcmpMode> ICMP redirects mode , ICMP unreachables mode , ICMP
Echo-reply Mode
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<ErrorCode>
<ErrorMessage>
0/1, 0/0/1
Error code
Error message
Failed to set the secondary IP address (<IPAddress>) on the interface <InterfaceNumber>. error:<ErrorCode> (<ErrorMessage>)
Error
Failed to set the secondary IP address on the interface number.
<IPAddress> ip_address, or, ipv6_address, or hostname
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<ErrorCode>
<ErrorMessage>
Error code
Error message
Failed to set the secondary IP address mask (<Mask>) on the interface <InterfaceNumber>. error:<ErrorCode> (<ErrorMessage>)
December/2018 1019
Message Collection
Error
FUJITSU PSWITCH
Failed to set the secondary IP address mask on the interface number.
<Mask> Mask value
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<ErrorCode>
<ErrorMessage>
Error code
Error message
Failed to set the secondary IP broadcast address (<IPAddress>) on the interface <InterfaceNumber>. error:<ErrorCode>
(<ErrorMessage>)
Error
Failed to set the secondary IP broadcast address on the interface number.
<IPAddress> ip_address, or, ipv6_address, or hostname
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<ErrorCode>
<ErrorMessage>
Error code
Error message
ERROR in configuring secondary IP address on the interface
<InterfaceNumber>. error:<ErrorCode>
Error
ERROR in configuring secondary IP address on the interface number.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<ErrorCode> Error code
Failed to get the stack interface name of the interface
<InterfaceNumber>.
Error
Failed to get the stack interface name of the interface number.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to reset the IFF_UP flag on the interface <InterfaceNumber>. error:<ErrorCode> (<ErrorMessage>)
1020 December/2018
FUJITSU PSWITCH
Error
Message Collection
Failed to reset the IFF_UP flag on the interface number.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<ErrorCode>
<ErrorMessage>
0/1, 0/0/1
Error code
Error message
Failed to delete the IP address on the interface <InterfaceNumber>. error:<ErrorCode> (<ErrorMessage>)
Error
Failed to delete the IP address on the interface number.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<ErrorCode>
<ErrorMessage>
0/1, 0/0/1
Error code
Error message
Failed to get the stack interface name of the interface
<InterfaceNumber>.
Error
Failed to get the stack interface name of the interface number.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to get the MTU of the interface <InterfaceNumber>.
Error
Failed to get the MTU of the interface number.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to set the MTU (<MTU>) on the interface <InterfaceNumber>. error:<ErrorCode> (<ErrorMessage>)
December/2018 1021
Message Collection
Error
FUJITSU PSWITCH
Failed to set the MTU on the interface number.
<MTU> Maximum Transmission Unit
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<ErrorCode>
<ErrorMessage>
Error code
Error message
Failed to get the stack interface name of the interface
<InterfaceNumber>.
Error
Failed to get the stack interface name of the interface number.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to get the BW of the interface <InterfaceNumber>.
Error
Failed to get the Bandwidth of the interface number.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to set the BW (<Bandwidth>) on the interface
<InterfaceNumber>. error:<ErrorCode> (<ErrorMessage>)
Error
Failed to set the Bandwidthon the interface number.
<Bandwidth> Band width
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<ErrorCode>
<ErrorMessage>
Error code
Error message
Failed to get the stack interface name of the interface
<InterfaceNumber>.
1022 December/2018
FUJITSU PSWITCH
Error
Message Collection
Failed to get the stack interface name of the interface number.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to get the ICMP unreachables mode of the interface
<InterfaceNumber>.
Error
Failed to get the ICMP unreachables mode of the interface number.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to set the ICMP unreachables mode(<IcmpMode>)on the interface <InterfaceNumber>(<InterfaceNumber>). error:<ErrorCode> (<ErrorMessage>)
Error
Failed to set the ICMP unreachables mode on the interface number.
<IcmpMode> ICMP redirects mode , ICMP unreachables mode , ICMP
Echo-reply Mode
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<ErrorCode>
<ErrorMessage>
Error code
Error message
Failed to get the stack interface name of the interface
<InterfaceNumber>.
Error
Failed to get the stack interface name of the interface number.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to get the ICMP redirects mode of the interface
<InterfaceNumber>.
December/2018 1023
Message Collection
Error
FUJITSU PSWITCH
Failed to get the ICMP redirects mode of the interface number.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to set the ICMP redirects mode (<IcmpMode>) on the interface
<InterfaceNumber> (<InterfaceNumber>). error:<ErrorCode>
(<ErrorMessage>)
Error
Failed to set the ICMP redirects mode on the interface number.
<IcmpMode> ICMP redirects mode , ICMP unreachables mode , ICMP
Echo-reply Mode
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<ErrorCode>
<ErrorMessage>
Error code
Error message
Failed to get the ICMP rate-limit.
Error
Failed to get the ICMP rate-limit.
Failed to set the ICMP rate-limit (burst-size:<SizeValue> interval:<BurstInterval>.
Error
Failed to set the ICMP rate-limit.
<SizeValue> An integer for a specific range or a limit value.
<BurstInterval> Burst interval
Failed to get the ICMP echo-reply mode.
Error
Failed to get the ICMP echo-reply mode.
Failed to set the ICMP echo-reply mode (<IcmpMode>).
1024 December/2018
FUJITSU PSWITCH
Error
Message Collection
Failed to set the ICMP echo-reply mod.
<IcmpMode> ICMP redirects mode , ICMP unreachables mode , ICMP
Echo-reply Mode
Failed to get the interface type of the interface
<InterfaceNumber>.
Error
Failed to get the interface type of the interface number.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
VRRP on loopback/tunnel interface <InterfaceNumber>.
Error
VRRP on loopback/tunnel interface number.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to get the USP info of the interface <InterfaceNumber>.
Error
Failed to get the USP info of the interface number.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to set VRRP IP address (<IPAddress>) on interface
<InterfaceNumber> in the linux stack
Error
Failed to set VRRP IP address on interface number in the linux stack
<IPAddress> ip_address, or, ipv6_address, or hostname
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to set VRRP IP address mask <Mask> oninterface
<InterfaceNumber> in the linux stack
December/2018 1025
Message Collection
Notice
FUJITSU PSWITCH
Failed to set VRRP IP address mask on interface number.
<Mask> Mask value
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to delete the VRRP IP address (<IPAddress>) on interface
<InterfaceNumber> in the linux stack
Notice
Failed to delete the VRRP IP address on interface number in the linux stack
<IPAddress> ip_address, or, ipv6_address, or hostname
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to get the stack interface name of the interface
<InterfaceNumber>.
Notice
Failed to get the stack interface name of the interface number.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to set the secondary IP address (<IPAddress>) on the interface <InterfaceNumber>. error:<ErrorCode> (<ErrorMessage>)
Error
Failed to set the secondary IP address on the interface number.
<IPAddress> ip_address, or, ipv6_address, or hostname
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<ErrorCode>
<ErrorMessage>
Error code
Error message
Failed to set the secondary IP address mask (<Mask>) on the interface <InterfaceNumber>. error:<ErrorCode> (<ErrorMessage>)
1026 December/2018
FUJITSU PSWITCH
Error
Message Collection
Failed to set the secondary IP address mask on the interface number.
<Mask> Mask value
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<ErrorCode>
<ErrorMessage>
Error code
Error message
Failed to set the secondary IP broadcast address (<IPAddress>) on the interface <InterfaceNumber>. error:<ErrorCode>
(<ErrorMessage>)
Error
Failed to set the secondary IP broadcast address on the interface number.
<IPAddress> ip_address, or, ipv6_address, or hostname
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<ErrorCode>
<ErrorMessage>
Error code
Error message
Failed to delete the IP address on the interface <InterfaceNumber>. error:<ErrorCode> (<ErrorMessage>)
Error
Failed to delete the IP address on the interface number.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<ErrorCode>
<ErrorMessage>
Error code
Error message
Failed to get the stack interface name of the interface
<InterfaceNumber>.
Error
Failed to get the stack interface name of the interface number.
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Failed to flap the interface <InterfaceNumber>.
December/2018 1027
Message Collection
Error
FUJITSU PSWITCH
Failed to flap the interface Name
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
Read <LengthValue> bytes of message <MessageType> from service
VR-AGENT, but message reports its length as <LengthValue>
Error
Read n bytes of message type from service VR-AGENT, but message reports its length as k.
<LengthValue> ipv6 prefix length
<MessageType> Message type.
VR_AGENT failed to register to best route service.
Error
VR_AGENT failed to register to best route service.
Failed to handle <MessageType> router event
Error
Failed to handle INTERFACE IPv4 ENABLE PENDING router event
<MessageType> Message type.
Failed to handle <MessageType> router event
Error
Failed to handle INTERFACE IPv4 DISABLE router event
<MessageType> Message type.
Failed to handle <MessageType> router event
Error
Failed to handle IPv4 MTU CHANGE router event
<MessageType> Message type.
Failed to handle <MessageType> router event
1028 December/2018
FUJITSU PSWITCH
Error
Failed to handle BANDWIDTH CHANGE router event
<MessageType> Message type.
Failed to handle <MessageType> router event
Error
Failed to handle INTERFACE CONFIG CHANGE router event
<MessageType> Message type.
Failed to handle <MessageType> router event
Error
Failed to handle IPv4 ADDRESS CHANGE router event
<MessageType> Message type.
Message Collection
Failed to handle <MessageType> router event
Error
Failed to handle HOST INTERFACE FOR IPv4 router event
<MessageType> Message type.
Failed to register as router event client (err = <ErrorCode>).
Error
Failed to register as router event client.
<ErrorCode> Error code
Invalid parameter.
Error
Router event register fail. Invalid parameter.
Client list already full.
Error
Router event register fail. Client list already full.
Client name already registered.
December/2018 1029
Message Collection
Error
Router event register fail. Client name already registered.
FUJITSU PSWITCH
General failure.
Error
Router event register fail. General failure.
Other failure.
Error
Router event register fail. Other failure.
VRF Failed to create router event client socket.
Error
Failed to create router event client socket.
VRF Deregistering route event client <VrfName>
Notice
Route event client timeout.
<VrfName> Name of Virtual Routing and Forwarding Instance
VRF Registration failed for RouterEventClient following timeout! mypid = <PID> myName = <VrfName>
Error
VRF Registration failed.
<PID>
<VrfName> Name of Virtual Routing and Forwarding Instance
VRF-ID <VfrID>: Failed to initialize RPC to OpEN. Exiting (result
= <ErrorCode>)
1030 December/2018
FUJITSU PSWITCH
Error
Failed to initialize RPC to OpEN.
<VfrID>
<ErrorCode> Error code
VRF-ID <VfrID>: Failed to get the vrf-name.
Error
Failed to get the vrf-name.
<VfrID>
Message Collection
[VRF <VrfName>]: VR-Agent process restarted. VRF ID = <VfrID>, PID
= <ProcessID>
Warning
VR-Agent process restarted.
<VrfName> Name of Virtual Routing and Forwarding Instance
<VfrID>
<ProcessID> Process id
[VRF <VrfName>]: Failed to create the VR_AGENT ARP socket.
Error
Failed to create the VR_AGENT ARP socket.
<VrfName> Name of Virtual Routing and Forwarding Instance
[VRF <VrfName>]: Failed to initialize the VR_AGENT ARP netlink socket
Error
Failed to initialize the VR_AGENT ARP netlink socket.
<VrfName> Name of Virtual Routing and Forwarding Instance
[VRF <VrfName>]: Failed to create snmp proc monitor thread. Error
<ErrorCode>.
December/2018 1031
Message Collection
Error
FUJITSU PSWITCH
Failed to create snmp proc monitor thread.
<VrfName> Name of Virtual Routing and Forwarding Instance
<ErrorCode> Error code
[VRF <VrfName>]: Failed to initialize the VR_AGENT netlink socket for updates to Kernel (VRF namespce).
Error
Failed to initialize the VR_AGENT netlink socket for updates to Kernel.
<VrfName> Name of Virtual Routing and Forwarding Instance
[VRF <VrfName>]: Failed to create threads to handle Kernel to FP
Route notifications. Error <ErrorCode>."
Error
Failed to create threads to handle FP Route notifications.
<VrfName> Name of Virtual Routing and Forwarding Instance
<ErrorCode> Error code
[VRF <VrfName>]: Failed to register Route Types with OPEN RTO.
Error
Failed to register Route Types with OPEN RTO.
<VrfName> Name of Virtual Routing and Forwarding Instance
[VRF <VrfName>]: VR_AGENT failed to register to router event client.
Error
Failed to register to router event client.
<VrfName> Name of Virtual Routing and Forwarding Instance
[VRF <VrfName>]: VR_AGENT: Failure in router event client registration. Client id = <ID>, sock fd = <SocketFD>
1032 December/2018
FUJITSU PSWITCH
Error
Message Collection
Failure in router event client registration.
<VrfName> Name of Virtual Routing and Forwarding Instance
<ID>
<SocketFD>
ID
File descriptor for socket
[VRF <VrfName>]: VR_AGENT failed to register to best route service.
Error
Failed to register to best route service.
<VrfName> Name of Virtual Routing and Forwarding Instance
[VRF <VrfName>]: select() error <ErrorCode> (<ErrorMessage>)
Error
Do not listen to router events.
<VrfName> Name of Virtual Routing and Forwarding Instance
<ErrorCode> Error code
<ErrorMessage> Error message
[VRF <VrfName>]: Error in handling arpd netlink event.
Error
Error in handling arpd netlink event.
<VrfName> Name of Virtual Routing and Forwarding Instance
[VRF <VrfName>]: Failed to read socket with fd <SocketFD> for router event client
Error
Failed to read socket for router event client.
<VrfName> Name of Virtual Routing and Forwarding Instance
<SocketFD> File descriptor for socket
[VRF <VrfName>]: Failed to read socket with fd <SocketFD> for best route client
December/2018 1033
Message Collection
Error
FUJITSU PSWITCH
Failed to read socket for best route client.
<VrfName> Name of Virtual Routing and Forwarding Instance
<SocketFD> File descriptor for socket
[VRF <VrfName>]: Failed to read socket with fd <SocketFD> for best route client
Error
Failed to read socket for best route client.
<VrfName> Name of Virtual Routing and Forwarding Instance
<SocketFD> File descriptor for socket
[VRF <VrfName>]: Error in handling ARP resolution message from switchdrvr process
Error
Error in handling ARP resolution message from switchdrvr process.
<VrfName> Name of Virtual Routing and Forwarding Instance
[VRF <VrfName>]: Error in handling syncDb event.
Error
Error in handling syncDb event.
<VrfName> Name of Virtual Routing and Forwarding Instance
[VRF <VrfName>]: Error in handling router event client timeout for
VR_AGENT.
Error
Error in handling router event client timeout.
<VrfName> Name of Virtual Routing and Forwarding Instance
[VRF <VrfName>]: Error in handling best route client timeout for
VR_AGENT.
1034 December/2018
FUJITSU PSWITCH
Error
Message Collection
Error in handling best route client timeout.
<VrfName> Name of Virtual Routing and Forwarding Instance
[VRF <VrfName>]: Application out of sync with swithdrvr. vr_agent process pid - <ProcessID> exiting.
Critical
Exceeded soak time
<VrfName>
<ProcessID>
Name of Virtual Routing and Forwarding Instance
Process id
Ignoring the kernel ARP entry added with broadcat MAC in VRF
¥<VrfName>¥.
Notice
Ignoring the kernel ARP entry added with broadcat MAC
<VrfName> Name of Virtual Routing and Forwarding Instance
Kernel ARP entry is successfully deleted from ARP cache of VRF
¥<VrfName>¥.
Informational
Kernel ARP entry is successfully deleted from ARP cache.
<VrfName> Name of Virtual Routing and Forwarding Instance
Kernel ARP entry is successfully added in to the ARP cache of VRF
¥""<VrfName>¥".
Informational
Kernel ARP entry is successfully added in to the ARP cache.
<VrfName> Name of Virtual Routing and Forwarding Instance
[VRF <VrfName>]: Failed to get the interface type of the interface
<InterfaceNumber>.
December/2018 1035
Message Collection
Error
FUJITSU PSWITCH
Failed to get the interface type.
<VrfName> Name of Virtual Routing and Forwarding Instance
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
[VRF <VrfName>]: Failed to get the stack interface name for the tunnel interface <InterfaceNumber>.
Error
Failed to get the stack interface name for the tunnel interface.
<VrfName> Name of Virtual Routing and Forwarding Instance
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
[VRF <VrfName>]: NULL fd for RPPI client socket
Error
NULL fd for RPPI client socket.
<VrfName> Name of Virtual Routing and Forwarding Instance
[VRF <VrfName>]: Failed to create RPPI client socket
Error
Failed to create RPPI client socket.
<VrfName> Name of Virtual Routing and Forwarding Instance
[VRF <VrfName>]: Failed to bind RPPI client socket
Error
Failed to bind RPPI client socket.
<VrfName> Name of Virtual Routing and Forwarding Instance
[VRF <VrfName>]: Failed to set the receive buffer-size for RPPI client socket
1036 December/2018
FUJITSU PSWITCH
Error
Message Collection
Failed to set the receive buffer-size for RPPI client socket.
<VrfName> Name of Virtual Routing and Forwarding Instance
[VRF <VrfName>]: Failed to trigger <EventName> router event for the interface <InterfaceNumber>
Error
Failed to trigger router event.
<VrfName> Name of Virtual Routing and Forwarding Instance
<EventName> Event name
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
[VRF <VrfName>]: Failed to get name for interface
<InterfaceNumber>. Error <ErrorMessage>
Error
Failed to get name for interface.
<VrfName> Name of Virtual Routing and Forwarding Instance
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<ErrorMessage>
0/1, 0/0/1
Error message
[VRF <VrfName>]: Invalid interface! Failed to flap the interface
Error
Failed to flap the interface.
<VrfName> Name of Virtual Routing and Forwarding Instance
[VRF <VrfName>]: Failed to reset the IFF_UP flag on the interface
<InterfaceNumber>. error:<ErrorCode> (<ErrorMessage>)
December/2018 1037
Message Collection
Error
FUJITSU PSWITCH
Failed to reset the IFF_UP flag.
<VrfName> Name of Virtual Routing and Forwarding Instance
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<ErrorCode>
<ErrorMessage>
Error code
Error message
[VRF <VrfName>]: Failed to set the IFF_UP flag on the interface
<InterfaceNumber>. error:<ErrorCode> (<ErrorMessage>)
Error
Failed to set the IFF_UP flag.
<VrfName> Name of Virtual Routing and Forwarding Instance
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<ErrorCode>
<ErrorMessage>
0/1, 0/0/1
Error code
Error message
[VRF <VrfName>]: Failed to get the stack interface name of the interface <InterfaceNumber>.
Error
Failed to get the stack interface name.
<VrfName> Name of Virtual Routing and Forwarding Instance
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
[VRF <VrfName>]: Failed to get the L3 MAC address of the interface
<InterfaceNumber>.
Error
Failed to get the L3 MAC address.
<VrfName> Name of Virtual Routing and Forwarding Instance
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
[VRF <VrfName>]: Failed to get the IP address info of the interface
<InterfaceNumber> (<InterfaceNumber>).
1038 December/2018
FUJITSU PSWITCH
Error
Message Collection
Failed to get the IP address info.
<VrfName> Name of Virtual Routing and Forwarding Instance
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
[VRF <VrfName>]: Failed to set the IP address (<IPAddress>) on the interface <InterfaceNumber>. error:<ErrorCode> (<ErrorMessage>)
Error
Failed to set the IP address.
<VrfName> Name of Virtual Routing and Forwarding Instance
<IPAddress> ip_address, or, ipv6_address, or hostname
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<ErrorCode>
<ErrorMessage>
Error code
Error message
[VRF <VrfName>]: Failed to set the IP address mask (<Mask>) on the interface <InterfaceNumber>. error:<ErrorCode> (<ErrorMessage>)
Error
Failed to set the IP address mask.
<VrfName> Name of Virtual Routing and Forwarding Instance
<Mask> Mask value
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<ErrorCode>
<ErrorMessage>
Error code
Error message
[VRF <VrfName>]: Failed to set the IP broadcast address
(<IPAddress>) on the interface <InterfaceNumber>. error:<ErrorCode> (<ErrorMessage>)
December/2018 1039
Message Collection
Error
FUJITSU PSWITCH
Failed to set the IP broadcast address.
<VrfName> Name of Virtual Routing and Forwarding Instance
<IPAddress> ip_address, or, ipv6_address, or hostname
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
<ErrorCode>
<ErrorMessage>
0/1, 0/0/1
Error code
Error message
[VRF <VrfName>]: Failed to set the L3 MAC hardware on the interface
<InterfaceNumber>. error:%ErrorNumber (<ErrorMessage>)"
Error
Failed to set the L3 MAC hardware.
<VrfName> Name of Virtual Routing and Forwarding Instance
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<ErrorMessage> Error message
[VRF <VrfName>]: Failed to set the IFF_UP flag on the interface
<InterfaceNumber>. error:%ErrorNumber (<ErrorMessage>)
Error
Failed to set the IFF_UP flag.
<VrfName> Name of Virtual Routing and Forwarding Instance
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<ErrorMessage> Error message
[VRF <VrfName>]: Failed to setup ARP on the interface
<InterfaceNumber>. error:<ErrorCode> (<ErrorMessage>)
Error
Failed to setup ARP.
<VrfName> Name of Virtual Routing and Forwarding Instance
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<ErrorCode>
<ErrorMessage>
Error code
Error message
[VRF <VrfName>]: Failed to get the MTU of the interface
<InterfaceNumber>.
1040 December/2018
FUJITSU PSWITCH
Error
Message Collection
Failed to get the MTU.
<VrfName> Name of Virtual Routing and Forwarding Instance
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
[VRF <VrfName>]: Failed to set the MTU (<MTU>) on the interface
<InterfaceNumber>. error:<ErrorCode> (<ErrorMessage>)"
Error
Failed to set the MTU.
<VrfName>
<MTU>
Name of Virtual Routing and Forwarding Instance
Maximum Transmission Unit
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<ErrorCode>
<ErrorMessage>
Error code
Error message
[VRF <VrfName>]: Failed to get the ICMP unreachables mode of the interface <InterfaceNumber>.
Error
Failed to get the ICMP unreachables mode.
<VrfName> Name of Virtual Routing and Forwarding Instance
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
[VRF <VrfName>]: Failed to set the ICMP unreachables mode
(<ErrorCode>) on the interface <InterfaceNumber>. error:<ErrorCode> (<ErrorMessage>)
Error
Failed to set the ICMP unreachables mode.
<VrfName> Name of Virtual Routing and Forwarding Instance
<ErrorCode> Error code
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
<ErrorMessage> Error message
[VRF <VrfName>]: Failed to get the ICMP redirects mode of the interface <InterfaceNumber>.
December/2018 1041
Message Collection
Error
FUJITSU PSWITCH
Failed to get the ICMP redirects mode.
<VrfName> Name of Virtual Routing and Forwarding Instance
<InterfaceNumber> Any number or string to represent a interface index: ex: 1,
0/1, 0/0/1
1042 December/2018
FUJITSU PSWITCH
Message Collection
bgpEstablishedNotification
The bgpEstablishedNotification event is generated when the BGP FSM enters the established state.
[MIB Name] BGP4-MIB
[Document]
[Related module]
RFC 4273
BGP4
bgpBackwardTransNotification
The bgpBackwardTransNotification event is generated when the BGP FSM moves from a higher numbered state to a lower numbered state.
[MIB Name] BGP4-MIB
[Document]
[Related module]
RFC 4273
BGP4
entConfigChange
An entConfigChange notification is generated when the value of entLastChangeTime changes. It can be utilized by an NMS to trigger logical/physical entity table maintenance polls.
[MIB Name] ENTITY-MIB
[Document]
[Related module]
RFC 2737
Physical interface
linkDown
December/2018 1043
Message Collection FUJITSU PSWITCH
A linkDown trap signifies that the SNMP entity, acting in an agent role, has detected that the ifOperStatus object for one of its communication links is about to enter the down state from some other state.
[MIB Name] IF-MIB
[Document]
[Related module]
RFC 2863
Interfaces, Statistic
linkUp
A linkUp trap signifies that the SNMP entity, acting in an agent role, has detected that the ifOperStatus object for one of its communication links left the down state and transitioned into some other state.
[MIB Name] IF-MIB
[Document]
[Related module]
RFC 2863
Interfaces, Statistic
lldpRemTablesChange
A lldpRemTablesChange notification is sent when the value of lldpStatsRemTableLastChangeTime changes. It can be utilized by an NMS to trigger
LLDP remote systems table maintenance polls.
[MIB Name] LLDP-MIB
[Document]
[Related module]
Subclause 12.1 of IEEE Std 802.1AB-2004
LLDP
ospfIfStateChange
An ospfIfStateChange trap signifies that there has been a change in the state of a non-virtual OSPF interface.
[MIB Name] OSPF-TRAP-MIB
[Document]
[Related module]
RFC1850
OSPF
ospfVirtIfStateChange
1044 December/2018
FUJITSU PSWITCH Message Collection
An ospfIfStateChange trap signifies that there has been a change in the state of an OSPF virtual interface.
[MIB Name] OSPF-TRAP-MIB
[Document]
[Related module]
RFC1850
OSPF
ospfNbrStateChange
An ospfNbrStateChange trap signifies that there has been a change in the state of a non-virtual OSPF neighbor.
[MIB Name] OSPF-TRAP-MIB
[Document]
[Related module]
RFC1850
OSPF
ospfVirtNbrStateChange
An ospfIfStateChange trap signifies that there has been a change in the state of an OSPF virtual neighbor.
[MIB Name] OSPF-TRAP-MIB
[Document]
[Related module]
RFC1850
OSPF
ospfIfConfigError
An ospfIfConfigError trap signifies that a packet has been received on a non-virtual interface from a router whose configuration parameters conflict with this router's configuration parameters.
[MIB Name] OSPF-TRAP-MIB
[Document]
[Related module]
RFC1850
OSPF
ospfVirtIfConfigError
December/2018 1045
Message Collection FUJITSU PSWITCH
An ospfConfigError trap signifies that a packet has been received on a virtual interface from a router whose configuration parameters conflict with this router's configuration parameters.
[MIB Name] OSPF-TRAP-MIB
[Document]
[Related module]
RFC1850
OSPF
ospfIfAuthFailure
An ospfIfAuthFailure trap signifies that a packet has been received on a non-virtual interface from a router whose authentication key or authentication type conflicts with this router's authentication key or authentication type.
[MIB Name] OSPF-TRAP-MIB
[Document]
[Related module]
RFC1850
OSPF
ospfVirtIfAuthFailure
An ospfVirtIfAuthFailure trap signifies that a packet has been received on a virtual interface from a router whose authentication key or authentication type conflicts with this router's authentication key or authentication type.
[MIB Name] OSPF-TRAP-MIB
[Document]
[Related module]
RFC1850
OSPF
ospfIfRxBadPacket
An ospfIfRxBadPacket trap signifies that an OSPF packet has been received on a non-virtual interface that cannot be parsed.
[MIB Name] OSPF-TRAP-MIB
[Document]
[Related module]
RFC1850
OSPF
ospfVirtIfRxBadPacket
1046 December/2018
FUJITSU PSWITCH Message Collection
An ospfRxBadPacket trap signifies that an OSPF packet has been received on a virtual interface that cannot be parsed.
[MIB Name] OSPF-TRAP-MIB
[Document]
[Related module]
RFC1850
OSPF
ospfTxRetransmit
An ospfTxRetransmit trap signifies than an OSPF packet has been retransmitted on a non-virtual interface.
[MIB Name] OSPF-TRAP-MIB
[Document]
[Related module]
RFC1850
OSPF
ospfVirtIfTxRetransmit
An ospfTxRetransmit trap signifies than an OSPF packet has been retransmitted on a virtual interface.
[MIB Name] OSPF-TRAP-MIB
[Document]
[Related module]
RFC1850
OSPF
ospfOriginateLsa
An ospfOriginateLsa trap signifies that a new LSA has been originated by this router.
[MIB Name] OSPF-TRAP-MIB
[Document]
[Related module]
RFC1850
OSPF
ospfMaxAgeLsa
An ospfMaxAgeLsa trap signifies that one of the LSA in the router's link-state database has aged to MaxAge.
[MIB Name] OSPF-TRAP-MIB
[Document]
[Related module]
RFC1850
OSPF
ospfLsdbOverflow
December/2018 1047
Message Collection FUJITSU PSWITCH
An ospfLsdbOverflow trap signifies that the number of LSAs in the router's link-state database has exceeded ospfExtLsdbLimit.
[MIB Name] OSPF-TRAP-MIB
[Document]
[Related module]
RFC1850
OSPF
ospfLsdbApproachingOverflow
An ospfLsdbApproachingOverflow trap signifies that the number of LSAs in the router's link-state database has exceeded ninety percent of ospfExtLsdbLimit.
[MIB Name] OSPF-TRAP-MIB
[Document]
[Related module]
RFC1850
OSPF
dvmrpNeighborLoss
A dvmrpNeighborLoss trap signifies the loss of a 2-way adjacency with a neighbor.
[MIB Name] DVMRP-STD-MIB
[Document]
[Related module] draft-ietf-idmr-dvmrp-mib-11.txt
DVMRP
dvmrpNeighborNotPruning
A dvmrpNeighborNotPruning trap signifies that a non-pruning neighbor has been detected.
[MIB Name] DVMRP-STD-MIB
[Document]
[Related module] draft-ietf-idmr-dvmrp-mib-11.txt
DVMRP
pimNeighborLoss
A pimNeighborLoss trap signifies the loss of an adjacency with a neighbor.
[MIB Name] PIM-STD-MIB
[Document]
[Related module]
RFC 5060
PIM
risingAlarm
1048 December/2018
FUJITSU PSWITCH Message Collection
The SNMP trap that is generated when an alarm entry crosses its rising threshold and generates an event that is configured for sending SNMP traps.
[MIB Name] RMON-MIB
[Document]
[Related module]
RFC 2819
RMON
fallingAlarm
The SNMP trap that is generated when an alarm entry crosses its falling threshold and generates an event that is configured for sending SNMP traps.
[MIB Name] RMON-MIB
[Document]
[Related module]
RFC 2819
RMON
hcRisingAlarm
The SNMP notification that is generated when a high capacity alarm entry crosses its rising threshold and generates an event that is configured for sending SNMP traps.
[MIB Name] HC-ALARM-MIB
[Document]
[Related module]
RFC 3434
RMON
hcFallingAlarm
The SNMP notification that is generated when a high capacity alarm entry crosses its falling threshold and generates an event that is configured for sending SNMP traps.
[MIB Name] HC-ALARM-MIB
[Document]
[Related module]
RFC 3434
RMON
coldStart
December/2018 1049
Message Collection FUJITSU PSWITCH
A coldStart trap signifies that the SNMP entity, supporting a notification originator application, is reinitializing itself and that its configuration may have been altered.
[MIB Name] SNMPv2-MIB
[Document]
[Related module]
RFC 3418
SNMP, System
warmStart
A warmStart trap signifies that the SNMP entity, supporting a notification originator application, is reinitializing itself such that its configuration is unaltered.
[MIB Name] SNMPv2-MIB
[Document]
[Related module]
RFC 3418
SNMP, System
authenticationFailure
An authenticationFailure trap signifies that the SNMP entity has received a protocol message that is not properly authenticated.
[MIB Name] SNMPv2-MIB
[Document]
[Related module]
RFC 3418
SNMP, System
vrrpTrapNewMaster
The newMaster trap indicates that the sending agent has transitioned to 'Master' state.
[MIB Name] VRRP-MIB
[Document]
[Related module]
RFC2787
VRRP
vrrpTrapAuthFailure
1050 December/2018
FUJITSU PSWITCH Message Collection
A vrrpAuthFailure trap signifies that a packet has been received from a router whose authentication key or authentication type conflicts with this router's authentication key or authentication type.
[MIB Name] VRRP-MIB
[Document]
[Related module]
RFC2787
VRRP
newRoot
The newRoot trap indicates that the sending agent has become the new root of the Spanning Tree.
[MIB Name] BRIDGE-MIB
[Document]
[Related module]
RFC1493
STP
topologyChange
A topologyChange trap is sent by a bridge when any of its configured ports transitions from the Learning state to the Forwarding state, or from the Forwarding state to the Blocking state.
[MIB Name] BRIDGE-MIB
[Document]
[Related module]
RFC1493
STP
batteryMissing
If battery cannot be detected, this trap will be send.
[MIB Name] Private Trap
[Document]
[Related module]
- system
aclTrapRuleLogEvent
December/2018 1051
Message Collection FUJITSU PSWITCH
This trap is generated on a periodic basis to indicate that an ACL rule configured for logging was actively used by hardware to take action on one or more packets.
[MIB Name] Private Trap
[Document]
[Related module]
-
ACL
aclTrapRuleTimeRangeEvent
This trap is generated when there is a time range notification received on any
Time based ACL rule.
[MIB Name] Private Trap
[Document]
[Related module]
-
ACL
postLog
If POST test is failed, this trap will be send.
[MIB Name] Private Trap
[Document]
[Related module]
-
POST
loopProtect
If any interface is in loop situation, then this trap will be send.
[MIB Name] FUJITSU-TOR-MIB
[Document]
[Related module]
-
Loop Protection
temperatureStateChange
Trap is sent when the system temperature crosses a threshold. To avoid rapid flapping between states, a hysteresis may be applied.
[MIB Name] FUJITSU-TOR-MIB
[Document]
[Related module] system
thermalShutdown
1052 December/2018
FUJITSU PSWITCH
Trap is sent when thermal shutdown is initiated.
[MIB Name] FUJITSU-TOR-MIB
[Document]
[Related module]
- system
fanStateChange
Trap is sent when fan state change happens.
[MIB Name] FUJITSU-TOR-MIB
[Document]
[Related module]
- system
Message Collection
powSupplyStateChange
Trap is sent when power supply state change happens.
[MIB Name] FUJITSU-TOR-MIB
[Document]
[Related module]
- system
mstpNewRootBridge
The mstpNewRootBridge trap indicates that the sending agent has become the new root of the Spanning Tree in the CIST or in any MSTI.
[MIB Name] MSTP-MIB(ruzin-mstp-mib-02)
[Document]
[Related module]
-
MSTP
mstpNewRootPort
The mstpNewRootPort trap indicates that the sending agent has changed the root
Port of the Spanning Tree in the CIST or in any MSTI.
[MIB Name] MSTP-MIB(ruzin-mstp-mib-02)
[Document]
[Related module]
-
MSTP
mstpTopologyChange
December/2018 1053
Message Collection FUJITSU PSWITCH
A mstpTopologyChange trap is sent by a bridge when any of its configured ports n any instance (CIST or MSTI) transitions from the Learning state to the Forwarding state, or from the Forwarding tate to the Blocking state.
[MIB Name] MSTP-MIB(ruzin-mstp-mib-02)
[Document]
[Related module]
-
MSTP
1054 December/2018
The public link to your chat has been updated. You may view and manage your chat links after registration here.
Advertisement
VRF support
VLAN configuration
QoS management
IP address conflict detection
SNMP trap functionality
System log analysis
Advanced security features
Detailed documentation
Multicast support
Link aggregation
The manual provides detailed instructions on VLAN configuration. You can create and manage VLANs to segment your network and improve security.
SNMP traps are used to alert network administrators about specific events occurring on the switch. The manual explains how to configure SNMP traps and define the events that trigger them.
The switch includes features to detect and resolve IP address conflicts. The manual provides guidance on identifying and resolving such conflicts.
How to search for logs in the FUJITSU PSWITCH Message Collection?
The document is a collection of system log messages organized by categories such as ARP, AUTO_DISCOVERY, and MLAG. To find specific information, refer to the table of contents or search for specific message codes or descriptions within the provided text blocks.
Login to continue